diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 1377 |
1 files changed, 822 insertions, 555 deletions
@@ -23,10 +23,10 @@ VERSION = 1 PATCHLEVEL = 1 -SUBLEVEL = 4 +SUBLEVEL = 6 EXTRAVERSION = U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) -VERSION_FILE = include/version_autogenerated.h +VERSION_FILE = $(obj)include/version_autogenerated.h HOSTARCH := $(shell uname -m | \ sed -e s/i.86/i386/ \ @@ -45,14 +45,78 @@ export HOSTARCH HOSTOS VENDOR= ######################################################################### +# +# U-boot build supports producing a object files to the separate external +# directory. Two use cases are supported: +# +# 1) Add O= to the make command line +# 'make O=/tmp/build all' +# +# 2) Set environement variable BUILD_DIR to point to the desired location +# 'export BUILD_DIR=/tmp/build' +# 'make' +# +# The second approach can also be used with a MAKEALL script +# 'export BUILD_DIR=/tmp/build' +# './MAKEALL' +# +# Command line 'O=' setting overrides BUILD_DIR environent variable. +# +# When none of the above methods is used the local build is performed and +# the object files are placed in the source directory. +# + +ifdef O +ifeq ("$(origin O)", "command line") +BUILD_DIR := $(O) +endif +endif + +ifneq ($(BUILD_DIR),) +saved-output := $(BUILD_DIR) + +# Attempt to create a output directory. +$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) + +# Verify if it was successful. +BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) +$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) +endif # ifneq ($(BUILD_DIR),) + +OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) +SRCTREE := $(CURDIR) +TOPDIR := $(SRCTREE) +LNDIR := $(OBJTREE) +export TOPDIR SRCTREE OBJTREE + +MKCONFIG := $(SRCTREE)/mkconfig +export MKCONFIG + +ifneq ($(OBJTREE),$(SRCTREE)) +REMOTE_BUILD := 1 +export REMOTE_BUILD +endif + +# $(obj) and (src) are defined in config.mk but here in main Makefile +# we also need them before config.mk is included which is the case for +# some targets like unconfig, clean, clobber, distclean, etc. +ifneq ($(OBJTREE),$(SRCTREE)) +obj := $(OBJTREE)/ +src := $(SRCTREE)/ +else +obj := +src := +endif +export obj src + +######################################################################### -TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi) -export TOPDIR +ifeq ($(OBJTREE)/include/config.mk,$(wildcard $(OBJTREE)/include/config.mk)) -ifeq (include/config.mk,$(wildcard include/config.mk)) # load ARCH, BOARD, and CPU configuration -include include/config.mk +include $(OBJTREE)/include/config.mk export ARCH CPU BOARD VENDOR SOC + ifndef CROSS_COMPILE ifeq ($(HOSTARCH),ppc) CROSS_COMPILE = @@ -88,6 +152,9 @@ endif ifeq ($(ARCH),blackfin) CROSS_COMPILE = bfin-elf- endif +ifeq ($(ARCH),avr32) +CROSS_COMPILE = avr32- +endif endif endif @@ -96,7 +163,6 @@ export CROSS_COMPILE # load other configuration include $(TOPDIR)/config.mk - ######################################################################### # U-Boot objects....order is important (i.e. start must be first) @@ -114,11 +180,16 @@ endif ifeq ($(CPU),mpc85xx) OBJS += cpu/$(CPU)/resetvec.o endif +ifeq ($(CPU),mpc86xx) +OBJS += cpu/$(CPU)/resetvec.o +endif ifeq ($(CPU),bf533) OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o OBJS += cpu/$(CPU)/cplbhdlr.o cpu/$(CPU)/cplbmgr.o cpu/$(CPU)/flush.o endif +OBJS := $(addprefix $(obj),$(OBJS)) + LIBS = lib_generic/libgeneric.a LIBS += board/$(BOARDDIR)/lib$(BOARD).a LIBS += cpu/$(CPU)/lib$(CPU).a @@ -139,12 +210,13 @@ LIBS += drivers/sk98lin/libsk98lin.a LIBS += post/libpost.a post/cpu/libcpu.a LIBS += common/libcommon.a LIBS += $(BOARDLIBS) + +LIBS := $(addprefix $(obj),$(LIBS)) .PHONY : $(LIBS) # Add GCC lib PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc - # The "tools" are needed early, so put this first # Don't include stuff already done in $(LIBS) SUBDIRS = tools \ @@ -153,44 +225,61 @@ SUBDIRS = tools \ post/cpu .PHONY : $(SUBDIRS) +ifeq ($(CONFIG_NAND_U_BOOT),y) +NAND_SPL = nand_spl +U_BOOT_NAND = $(obj)u-boot-nand.bin +endif + +__OBJS := $(subst $(obj),,$(OBJS)) +__LIBS := $(subst $(obj),,$(LIBS)) + ######################################################################### ######################################################################### -ALL = u-boot.srec u-boot.bin System.map +ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) all: $(ALL) -u-boot.hex: u-boot +$(obj)u-boot.hex: $(obj)u-boot $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -u-boot.srec: u-boot +$(obj)u-boot.srec: $(obj)u-boot $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -u-boot.bin: u-boot +$(obj)u-boot.bin: $(obj)u-boot $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -u-boot.img: u-boot.bin +$(obj)u-boot.img: $(obj)u-boot.bin ./tools/mkimage -A $(ARCH) -T firmware -C none \ -a $(TEXT_BASE) -e 0 \ -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ -d $< $@ -u-boot.dis: u-boot +$(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ -u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT) +$(obj)u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT) UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ - $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \ - --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \ + cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ + --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ -Map u-boot.map -o u-boot +$(OBJS): + $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) + $(LIBS): - $(MAKE) -C `dirname $@` + $(MAKE) -C $(dir $(subst $(obj),,$@)) $(SUBDIRS): $(MAKE) -C $@ all +$(NAND_SPL): version + $(MAKE) -C nand_spl/board/$(BOARDDIR) all + +$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin + cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin + version: @echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \ echo -n "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \ @@ -199,41 +288,56 @@ version: echo "\"" >> $(VERSION_FILE) gdbtools: - $(MAKE) -C tools/gdb || exit 1 + $(MAKE) -C tools/gdb all || exit 1 + +updater: + $(MAKE) -C tools/updater all || exit 1 + +env: + $(MAKE) -C tools/env all || exit 1 depend dep: - @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done + for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done -tags: - ctags -w `find $(SUBDIRS) include \ +tags ctags: + ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) include \ lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ fs/cramfs fs/fat fs/fdos fs/jffs2 \ net disk rtc dtt drivers drivers/sk98lin common \ \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` etags: - etags -a `find $(SUBDIRS) include \ + etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) include \ lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ fs/cramfs fs/fat fs/fdos fs/jffs2 \ net disk rtc dtt drivers drivers/sk98lin common \ \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` -System.map: u-boot +$(obj)System.map: $(obj)u-boot @$(NM) $< | \ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ - sort > System.map + sort > $(obj)System.map ######################################################################### else -all install u-boot u-boot.srec depend dep: +all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ +$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ +$(SUBDIRS) version gdbtools updater env depend \ +dep tags ctags etags $(obj)System.map: @echo "System not configured - see README" >&2 @ exit 1 endif +.PHONY : CHANGELOG +CHANGELOG: + git log --no-merges U-Boot-1_1_5.. | \ + unexpand -a | sed -e 's/\s\s*$$//' > $@ + ######################################################################### unconfig: - @rm -f include/config.h include/config.mk board/*/config.tmp + @rm -f $(obj)include/config.h $(obj)include/config.mk \ + $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp #======================================================================== # PowerPC @@ -244,29 +348,29 @@ unconfig: ######################################################################### canmb_config: unconfig - @./mkconfig -a canmb ppc mpc5xxx canmb + @$(MKCONFIG) -a canmb ppc mpc5xxx canmb cmi_mpc5xx_config: unconfig - @./mkconfig $(@:_config=) ppc mpc5xx cmi + @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi PATI_config: unconfig - @./mkconfig $(@:_config=) ppc mpc5xx pati mpl + @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl ######################################################################### ## MPC5xxx Systems ######################################################################### aev_config: unconfig - @./mkconfig -a aev ppc mpc5xxx tqm5200 + @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 BC3450_config: unconfig - @./mkconfig -a BC3450 ppc mpc5xxx bc3450 + @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450 cpci5200_config: unconfig - @./mkconfig -a cpci5200 ppc mpc5xxx cpci5200 esd + @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd hmi1001_config: unconfig - @./mkconfig hmi1001 ppc mpc5xxx hmi1001 + @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001 Lite5200_config \ Lite5200_LOWBOOT_config \ @@ -278,174 +382,221 @@ icecube_5200_DDR_config \ icecube_5200_DDR_LOWBOOT_config \ icecube_5200_DDR_LOWBOOT08_config \ icecube_5100_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @mkdir -p $(obj)board/icecube + @ >$(obj)include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ { if [ "$(findstring DDR,$@)" ] ; \ - then echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \ - else echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \ + then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ + else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ fi ; \ echo "... with LOWBOOT configuration" ; \ } @[ -z "$(findstring LOWBOOT08,$@)" ] || \ - { echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \ + { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ echo "... with 8 MB flash only" ; \ echo "... with LOWBOOT configuration" ; \ } @[ -z "$(findstring DDR,$@)" ] || \ - { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ + { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ echo "... DDR memory revision" ; \ } @[ -z "$(findstring 5200,$@)" ] || \ - { echo "#define CONFIG_MPC5200" >>include/config.h ; \ + { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ echo "... with MPC5200 processor" ; \ } @[ -z "$(findstring 5100,$@)" ] || \ - { echo "#define CONFIG_MGT5100" >>include/config.h ; \ + { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ echo "... with MGT5100 processor" ; \ } - @./mkconfig -a IceCube ppc mpc5xxx icecube + @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube + +v38b_config: unconfig + @./mkconfig -a v38b ppc mpc5xxx v38b inka4x0_config: unconfig - @./mkconfig inka4x0 ppc mpc5xxx inka4x0 + @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 lite5200b_config \ lite5200b_LOWBOOT_config: unconfig - @ >include/config.h - @ echo "#define CONFIG_MPC5200_DDR" >>include/config.h + @mkdir -p $(obj)include + @mkdir -p $(obj)board/icecube + @ >$(obj)include/config.h + @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h @ echo "... DDR memory revision" - @ echo "#define CONFIG_MPC5200" >>include/config.h - @ echo "#define CONFIG_LITE5200B" >>include/config.h + @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h + @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \ + { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ echo "... with LOWBOOT configuration" ; \ } @ echo "... with MPC5200B processor" - @./mkconfig -a IceCube ppc mpc5xxx icecube + @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube mcc200_config \ -mcc200_SDRAM \ -mcc200_highboot \ -mcc200_highboot_SDRAM: unconfig - @ >include/config.h +mcc200_SDRAM_config \ +mcc200_highboot_config \ +mcc200_COM12_config \ +mcc200_COM12_SDRAM_config \ +mcc200_COM12_highboot_config \ +mcc200_COM12_highboot_SDRAM_config \ +mcc200_highboot_SDRAM_config \ +prs200_config \ +prs200_DDR_config \ +prs200_highboot_config \ +prs200_highboot_DDR_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/mcc200 + @ >$(obj)include/config.h @[ -n "$(findstring highboot,$@)" ] || \ { echo "... with lowboot configuration" ; \ } @[ -z "$(findstring highboot,$@)" ] || \ - { echo "TEXT_BASE = 0xFFF00000" >board/mcc200/config.tmp ; \ + { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ echo "... with highboot configuration" ; \ } @[ -n "$(findstring _SDRAM,$@)" ] || \ - { echo "... with DDR" ; \ + { if [ -n "$(findstring mcc200,$@)" ]; \ + then \ + echo "... with DDR" ; \ + else \ + if [ -n "$(findstring _DDR,$@)" ];\ + then \ + echo "... with DDR" ; \ + else \ + echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ + echo "... with SDRAM" ; \ + fi; \ + fi; \ } @[ -z "$(findstring _SDRAM,$@)" ] || \ - { echo "#define CONFIG_MCC200_SDRAM" >>include/config.h ; \ + { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ echo "... with SDRAM" ; \ } - @./mkconfig -a mcc200 ppc mpc5xxx mcc200 + @[ -z "$(findstring COM12,$@)" ] || \ + { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ + echo "... with console on COM12" ; \ + } + @[ -z "$(findstring prs200,$@)" ] || \ + { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ + } + @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200 o2dnt_config: - @./mkconfig o2dnt ppc mpc5xxx o2dnt + @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt pf5200_config: unconfig - @./mkconfig pf5200 ppc mpc5xxx pf5200 esd + @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd PM520_config \ PM520_DDR_config \ PM520_ROMBOOT_config \ PM520_ROMBOOT_DDR_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring DDR,$@)" ] || \ - { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ + { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ echo "... DDR memory revision" ; \ } @[ -z "$(findstring ROMBOOT,$@)" ] || \ - { echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ + { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ echo "... booting from 8-bit flash" ; \ } - @./mkconfig -a PM520 ppc mpc5xxx pm520 + @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520 smmaco4_config: unconfig - @./mkconfig -a smmaco4 ppc mpc5xxx tqm5200 + @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 spieval_config: unconfig - @./mkconfig -a spieval ppc mpc5xxx tqm5200 + @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 TB5200_B_config \ TB5200_config: unconfig + @mkdir -p $(obj)include @[ -z "$(findstring _B,$@)" ] || \ - { echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ + { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ echo "... with MPC5200B processor" ; \ } - @./mkconfig -n $@ -a TB5200 ppc mpc5xxx tqm5200 + @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 MINI5200_config \ EVAL5200_config \ TOP5200_config: unconfig - @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h - @./mkconfig -n $@ -a TOP5200 ppc mpc5xxx top5200 emk + @mkdir -p $(obj)include + @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h + @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk Total5100_config \ Total5200_config \ Total5200_lowboot_config \ Total5200_Rev2_config \ Total5200_Rev2_lowboot_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @mkdir -p $(obj)board/total5200 + @ >$(obj)include/config.h @[ -z "$(findstring 5100,$@)" ] || \ - { echo "#define CONFIG_MGT5100" >>include/config.h ; \ + { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ echo "... with MGT5100 processor" ; \ } @[ -z "$(findstring 5200,$@)" ] || \ - { echo "#define CONFIG_MPC5200" >>include/config.h ; \ + { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ echo "... with MPC5200 processor" ; \ } @[ -n "$(findstring Rev,$@)" ] || \ - { echo "#define CONFIG_TOTAL5200_REV 1" >>include/config.h ; \ + { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ echo "... revision 1 board" ; \ } @[ -z "$(findstring Rev2_,$@)" ] || \ - { echo "#define CONFIG_TOTAL5200_REV 2" >>include/config.h ; \ + { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ echo "... revision 2 board" ; \ } @[ -z "$(findstring lowboot_,$@)" ] || \ - { echo "TEXT_BASE = 0xFE000000" >board/total5200/config.tmp ; \ + { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ echo "... with lowboot configuration" ; \ } - @./mkconfig -a Total5200 ppc mpc5xxx total5200 + @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200 -TQM5200_config \ -TQM5200_B_config \ -TQM5200_B_HIGHBOOT_config \ +cam5200_config \ +fo300_config \ +MiniFAP_config \ TQM5200S_config \ TQM5200S_HIGHBOOT_config \ -TQM5200_STK100_config \ -cam5200_config \ -MiniFAP_config: unconfig - @ >include/config.h - @[ -z "$(findstring MiniFAP,$@)" ] || \ - { echo "#define CONFIG_MINIFAP" >>include/config.h ; \ - echo "... TQM5200_AC on MiniFAP" ; \ - } +TQM5200_B_config \ +TQM5200_B_HIGHBOOT_config \ +TQM5200_config \ +TQM5200_STK100_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/tqm5200 + @ >$(obj)include/config.h @[ -z "$(findstring cam5200,$@)" ] || \ - { echo "#define CONFIG_CAM5200" >>include/config.h ; \ - echo "#define CONFIG_TQM5200S" >>include/config.h ; \ - echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ + { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ echo "... TQM5200S on Cam5200" ; \ } + @[ -z "$(findstring fo300,$@)" ] || \ + { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ + echo "... TQM5200 on FO300" ; \ + } + @[ -z "$(findstring MiniFAP,$@)" ] || \ + { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ + echo "... TQM5200_AC on MiniFAP" ; \ + } @[ -z "$(findstring STK100,$@)" ] || \ - { echo "#define CONFIG_STK52XX_REV100" >>include/config.h ; \ + { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ echo "... on a STK52XX.100 base board" ; \ } @[ -z "$(findstring TQM5200_B,$@)" ] || \ - { echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ + { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ } @[ -z "$(findstring TQM5200S,$@)" ] || \ - { echo "#define CONFIG_TQM5200S" >>include/config.h ; \ - echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ + { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ } @[ -z "$(findstring HIGHBOOT,$@)" ] || \ - { echo "TEXT_BASE = 0xFFF00000" >board/tqm5200/config.tmp ; \ + { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ } - @./mkconfig -n $@ -a TQM5200 ppc mpc5xxx tqm5200 + @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 ######################################################################### ## MPC8xx Systems @@ -455,9 +606,10 @@ Adder_config \ Adder87x_config \ AdderII_config \ : unconfig + @mkdir -p $(obj)include $(if $(findstring AdderII,$@), \ - @echo "#define CONFIG_MPC852T" > include/config.h) - @./mkconfig -a Adder ppc mpc8xx adder + @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) + @$(MKCONFIG) -a Adder ppc mpc8xx adder AdderUSB_config: unconfig @./mkconfig -a AdderUSB ppc mpc8xx adder @@ -468,154 +620,160 @@ FADS850SAR_config \ MPC86xADS_config \ MPC885ADS_config \ FADS860T_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx fads + @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads AMX860_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx amx860 westel + @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel c2mon_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx c2mon + @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon CCM_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx CCM siemens + @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens cogent_mpc8xx_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx cogent + @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent ELPT860_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX + @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX EP88x_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx ep88x + @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x ESTEEM192E_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx esteem192e + @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e ETX094_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx etx094 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094 FLAGADM_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx flagadm + @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) GEN860T_SC_config \ GEN860T_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _SC,$@)" ] || \ - { echo "#define CONFIG_SC" >>include/config.h ; \ + { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ echo "With reduced H/W feature set (SC)..." ; \ } - @./mkconfig -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t + @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t GENIETV_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx genietv + @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv GTH_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx gth + @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth hermes_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx hermes + @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes HMI10_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx + @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx IAD210_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens + @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) ICU862_100MHz_config \ ICU862_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _100MHz,$@)" ] || \ - { echo "#define CONFIG_100MHz" >>include/config.h ; \ + { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ echo "... with 100MHz system clock" ; \ } - @./mkconfig -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 + @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 IP860_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx ip860 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860 IVML24_256_config \ IVML24_128_config \ IVML24_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring IVML24_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_16M" >>include/config.h ; \ + { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ } @[ -z "$(findstring IVML24_128_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_32M" >>include/config.h ; \ + { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ } @[ -z "$(findstring IVML24_256_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_64M" >>include/config.h ; \ + { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ } - @./mkconfig -a IVML24 ppc mpc8xx ivm + @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm IVMS8_256_config \ IVMS8_128_config \ IVMS8_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring IVMS8_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_16M" >>include/config.h ; \ + { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ } @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_32M" >>include/config.h ; \ + { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ } @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_64M" >>include/config.h ; \ + { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ } - @./mkconfig -a IVMS8 ppc mpc8xx ivm + @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm KUP4K_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx kup4k kup + @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup KUP4X_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx kup4x kup + @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup LANTEC_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx lantec + @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec lwmon_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx lwmon + @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon MBX_config \ MBX860T_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx mbx8xx + @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx MHPC_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx mhpc eltec + @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec MVS1_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx mvs1 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx mvs1 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) NETVIA_V2_config \ NETVIA_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring NETVIA_config,$@)" ] || \ - { echo "#define CONFIG_NETVIA_VERSION 1" >>include/config.h ; \ + { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ echo "... Version 1" ; \ } @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETVIA_VERSION 2" >>include/config.h ; \ + { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ echo "... Version 2" ; \ } - @./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia + @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) NETPHONE_V2_config \ NETPHONE_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring NETPHONE_config,$@)" ] || \ - { echo "#define CONFIG_NETPHONE_VERSION 1" >>include/config.h ; \ + { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ } @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETPHONE_VERSION 2" >>include/config.h ; \ + { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ } - @./mkconfig -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone + @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) @@ -627,85 +785,88 @@ NETTA_ISDN_6412_config \ NETTA_ISDN_config \ NETTA_6412_config \ NETTA_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring ISDN_,$@)" ] || \ - { echo "#define CONFIG_NETTA_ISDN 1" >>include/config.h ; \ + { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ } @[ -n "$(findstring ISDN_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_ISDN" >>include/config.h ; \ + { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ } @[ -z "$(findstring 6412_,$@)" ] || \ - { echo "#define CONFIG_NETTA_6412 1" >>include/config.h ; \ + { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ } @[ -n "$(findstring 6412_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_6412" >>include/config.h ; \ + { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ } @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ - { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>include/config.h ; \ + { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ } @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_SWAPHOOK" >>include/config.h ; \ + { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ } - @./mkconfig -a $(call xtract_NETTA,$@) ppc mpc8xx netta + @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) NETTA2_V2_config \ NETTA2_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring NETTA2_config,$@)" ] || \ - { echo "#define CONFIG_NETTA2_VERSION 1" >>include/config.h ; \ + { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ } @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETTA2_VERSION 2" >>include/config.h ; \ + { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ } - @./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 + @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 NC650_Rev1_config \ NC650_Rev2_config \ CP850_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring CP850,$@)" ] || \ - { echo "#define CONFIG_CP850 1" >>include/config.h ; \ - echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \ + { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ + echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ } @[ -z "$(findstring Rev1,$@)" ] || \ - { echo "#define CONFIG_IDS852_REV1 1" >>include/config.h ; \ + { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ } @[ -z "$(findstring Rev2,$@)" ] || \ - { echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \ + { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ } - @./mkconfig -a NC650 ppc mpc8xx nc650 + @$(MKCONFIG) -a NC650 ppc mpc8xx nc650 NX823_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx nx823 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823 pcu_e_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens + @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens QS850_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc + @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc QS823_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc + @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc QS860T_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc + @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc quantum_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx quantum + @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum R360MPI_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx r360mpi + @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi RBC823_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx rbc823 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823 RPXClassic_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx RPXClassic + @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic RPXlite_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx RPXlite + @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite RPXlite_DW_64_config \ RPXlite_DW_LCD_config \ @@ -715,55 +876,56 @@ RPXlite_DW_NVRAM_64_config \ RPXlite_DW_NVRAM_LCD_config \ RPXlite_DW_NVRAM_64_LCD_config \ RPXlite_DW_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _64,$@)" ] || \ - { echo "#define RPXlite_64MHz" >>include/config.h ; \ + { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ echo "... with 64MHz system clock ..."; \ } @[ -z "$(findstring _LCD,$@)" ] || \ - { echo "#define CONFIG_LCD" >>include/config.h ; \ - echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \ + { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ + echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ echo "... with LCD display ..."; \ } @[ -z "$(findstring _NVRAM,$@)" ] || \ - { echo "#define CFG_ENV_IS_IN_NVRAM" >>include/config.h ; \ + { echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ echo "... with ENV in NVRAM ..."; \ } - @./mkconfig -a RPXlite_DW ppc mpc8xx RPXlite_dw + @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw rmu_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx rmu + @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu RRvision_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx RRvision + @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision RRvision_LCD_config: unconfig - @echo "#define CONFIG_LCD" >include/config.h - @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h - @./mkconfig -a RRvision ppc mpc8xx RRvision + @mkdir -p $(obj)include + @echo "#define CONFIG_LCD" >$(obj)include/config.h + @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h + @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision SM850_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx + @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx spc1920_config: - @./mkconfig $(@:_config=) ppc mpc8xx spc1920 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920 SPD823TS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx spd8xx + @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx stxxtc_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx stxxtc + @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc svm_sc8xx_config: unconfig - @ >include/config.h - @./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx + @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx SXNI855T_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx sixnet + @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet # EMK MPC8xx based modules TOP860_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8xx top860 emk + @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk # Play some tricks for configuration selection # Only 855 and 860 boards may come with FEC @@ -787,31 +949,35 @@ TQM862M_config \ TQM866M_config \ TQM885D_config \ virtlab2_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _LCD,$@)" ] || \ - { echo "#define CONFIG_LCD" >>include/config.h ; \ - echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \ + { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ + echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ echo "... with LCD display" ; \ } - @./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx + @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx TTTech_config: unconfig - @echo "#define CONFIG_LCD" >include/config.h - @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h - @./mkconfig -a TQM823L ppc mpc8xx tqm8xx + @mkdir -p $(obj)include + @echo "#define CONFIG_LCD" >$(obj)include/config.h + @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h + @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx uc100_config : unconfig - @./mkconfig $(@:_config=) ppc mpc8xx uc100 + @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100 v37_config: unconfig - @echo "#define CONFIG_LCD" >include/config.h - @echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h - @./mkconfig $(@:_config=) ppc mpc8xx v37 + @mkdir -p $(obj)include + @echo "#define CONFIG_LCD" >$(obj)include/config.h + @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h + @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37 wtk_config: unconfig - @echo "#define CONFIG_LCD" >include/config.h - @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>include/config.h - @./mkconfig -a TQM823L ppc mpc8xx tqm8xx + @mkdir -p $(obj)include + @echo "#define CONFIG_LCD" >$(obj)include/config.h + @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h + @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx ######################################################################### ## PPC4xx Systems @@ -819,146 +985,148 @@ wtk_config: unconfig xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) ADCIOP_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx adciop esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd AP1000_config:unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ap1000 amirix + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix APC405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx apc405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd AR405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ar405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd ASH405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ash405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd bamboo_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc bubinga_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc CANBT_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx canbt esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd CATcenter_config \ CATcenter_25_config \ CATcenter_33_config: unconfig - @ echo "/* CATcenter uses PPChameleon Model ME */" > include/config.h - @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h + @mkdir -p $(obj)include + @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h + @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h @[ -z "$(findstring _25,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ echo "SysClk = 25MHz" ; \ } @[ -z "$(findstring _33,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ echo "SysClk = 33MHz" ; \ } - @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave + @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave CPCI2DP_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx cpci2dp esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd CPCI405_config \ CPCI4052_config \ CPCI405DT_config \ CPCI405AB_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd - @echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk + @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd + @echo "BOARD_REVISION = $(@:_config=)" >> $(obj)include/config.mk CPCI440_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx cpci440 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci440 esd CPCIISER4_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd CRAYL1_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx L1 cray + @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray csb272_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx csb272 + @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272 csb472_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx csb472 + @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472 DASA_SIM_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd DP405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx dp405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd DU405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx du405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd ebony_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ebony amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc ERIC_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx eric + @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric EXBITGEN_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx exbitgen + @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen G2000_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx g2000 + @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 HH405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx hh405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd HUB405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx hub405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd JSE_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx jse + @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse KAREF_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx karef sandburst + @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst luan_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx luan amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc METROBOX_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst + @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst MIP405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl + @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl MIP405T_config: unconfig - @echo "#define CONFIG_MIP405T" >include/config.h + @mkdir -p $(obj)include + @echo "#define CONFIG_MIP405T" >$(obj)include/config.h @echo "Enable subset config for MIP405T" - @./mkconfig -a MIP405 ppc ppc4xx mip405 mpl + @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl ML2_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ml2 + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2 ml300_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx ocotea_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc OCRTC_config \ ORSG_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd p3p440_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx p3p440 prodrive + @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive PCI405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx pci405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd pcs440ep_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx pcs440ep + @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep PIP405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl + @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl PLU405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx plu405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd PMC405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd PPChameleonEVB_config \ PPChameleonEVB_BA_25_config \ @@ -967,66 +1135,98 @@ PPChameleonEVB_HI_25_config \ PPChameleonEVB_BA_33_config \ PPChameleonEVB_ME_33_config \ PPChameleonEVB_HI_33_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring EVB_BA,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ echo "... BASIC model" ; \ } @[ -z "$(findstring EVB_ME,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ echo "... MEDIUM model" ; \ } @[ -z "$(findstring EVB_HI,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ echo "... HIGH-END model" ; \ } @[ -z "$(findstring _25,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ echo "SysClk = 25MHz" ; \ } @[ -z "$(findstring _33,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \ + { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ echo "SysClk = 33MHz" ; \ } - @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave + @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave + +rainier_config: unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_RAINIER" > $(obj)include/config.h + @echo "Configuring for rainier board as subset of sequoia..." + @$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc + +rainier_nand_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)nand_spl + @mkdir -p $(obj)board/amcc/sequoia + @echo "#define CONFIG_RAINIER" > $(obj)include/config.h + @echo "Configuring for rainier board as subset of sequoia..." + @echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h + @echo "Compile NAND boot image for sequoia" + @$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc + @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk sbc405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx sbc405 + @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 + +sequoia_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx sequoia amcc + +sequoia_nand_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)nand_spl + @mkdir -p $(obj)board/amcc/sequoia + @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h + @echo "Compile NAND boot image for sequoia" + @$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc + @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk sycamore_config: unconfig @echo "Configuring for sycamore board as subset of walnut..." - @./mkconfig -a walnut ppc ppc4xx walnut amcc + @$(MKCONFIG) -a walnut ppc ppc4xx walnut amcc VOH405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx voh405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd VOM405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx vom405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd CMS700_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx cms700 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd W7OLMC_config \ W7OLMG_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx w7o + @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o walnut_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx walnut amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx walnut amcc WUH405_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd + @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd XPEDITE1K_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx xpedite1k + @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k yosemite_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx yosemite amcc yellowstone_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx yellowstone amcc yucca_config: unconfig - @./mkconfig $(@:_config=) ppc ppc4xx yucca amcc + @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc ######################################################################### ## MPC8220 Systems @@ -1034,10 +1234,10 @@ yucca_config: unconfig Alaska8220_config \ Yukon8220_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8220 alaska + @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska sorcery_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8220 sorcery + @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery ######################################################################### ## MPC824x Systems @@ -1045,18 +1245,18 @@ sorcery_config: unconfig xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) A3000_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x a3000 + @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000 barco_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x barco + @$(MKCONFIG) $(@:_config=) ppc mpc824x barco BMW_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x bmw + @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw CPC45_config \ CPC45_ROMBOOT_config: unconfig - @./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45 - @cd ./include ; \ + @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45 + @cd $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ echo "... booting from 8-bit flash" ; \ @@ -1067,64 +1267,64 @@ CPC45_ROMBOOT_config: unconfig echo "export CONFIG_BOOT_ROM" >> config.mk; CU824_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x cu824 + @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824 debris_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x debris etin + @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin eXalion_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x eXalion + @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion HIDDEN_DRAGON_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x hidden_dragon + @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon kvme080_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x kvme080 etin + @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin MOUSSE_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x mousse + @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse MUSENKI_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x musenki + @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki MVBLUE_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x mvblue + @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue OXC_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x oxc + @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc PN62_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x pn62 + @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62 Sandpoint8240_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x sandpoint + @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint Sandpoint8245_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x sandpoint + @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint sbc8240_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x sbc8240 + @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240 SL8245_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x sl8245 + @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245 utx8245_config: unconfig - @./mkconfig $(@:_config=) ppc mpc824x utx8245 + @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245 ######################################################################### ## MPC8260 Systems ######################################################################### atc_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 atc + @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc cogent_mpc8260_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 cogent + @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent CPU86_config \ CPU86_ROMBOOT_config: unconfig - @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu86 - @cd ./include ; \ + @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86 + @cd $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ echo "... booting from 8-bit flash" ; \ @@ -1136,8 +1336,8 @@ CPU86_ROMBOOT_config: unconfig CPU87_config \ CPU87_ROMBOOT_config: unconfig - @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87 - @cd ./include ; \ + @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87 + @cd $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ echo "... booting from 8-bit flash" ; \ @@ -1149,29 +1349,33 @@ CPU87_ROMBOOT_config: unconfig ep8248_config \ ep8248E_config : unconfig - @./mkconfig ep8248 ppc mpc8260 ep8248 + @$(MKCONFIG) ep8248 ppc mpc8260 ep8248 ep8260_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 ep8260 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260 + +ep82xxm_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 ep82xxm gw8260_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 gw8260 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260 hymod_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 hymod + @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod IDS8247_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 ids8247 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247 IPHASE4539_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 iphase4539 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539 ISPAN_config \ ISPAN_REVB_config: unconfig + @mkdir -p $(obj)include @if [ "$(findstring _REVB_,$@)" ] ; then \ - echo "#define CFG_REV_B" > include/config.h ; \ + echo "#define CFG_REV_B" > $(obj)include/config.h ; \ fi - @./mkconfig -a ISPAN ppc mpc8260 ispan + @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan MPC8260ADS_config \ MPC8260ADS_lowboot_config \ @@ -1190,21 +1394,23 @@ PQ2FADS-ZU_lowboot_config \ PQ2FADS-ZU_66MHz_config \ PQ2FADS-ZU_66MHz_lowboot_config \ : unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/mpc8260ads $(if $(findstring PQ2FADS,$@), \ - @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \ - @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > include/config.h) + @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \ + @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) $(if $(findstring MHz,$@), \ - @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \ + @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ $(if $(findstring VR,$@), \ - @echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h)) + @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) @[ -z "$(findstring lowboot_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \ + { echo "TEXT_BASE = 0xFF800000" >$(obj)board/mpc8260ads/config.tmp ; \ echo "... with lowboot configuration" ; \ } - @./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads + @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads MPC8266ADS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads + @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads # PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash PM825_config \ @@ -1215,71 +1421,76 @@ PM826_config \ PM826_ROMBOOT_config \ PM826_BIGFLASH_config \ PM826_ROMBOOT_BIGFLASH_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/pm826 @if [ "$(findstring PM825_,$@)" ] ; then \ - echo "#define CONFIG_PCI" >include/config.h ; \ + echo "#define CONFIG_PCI" >$(obj)include/config.h ; \ else \ - >include/config.h ; \ + >$(obj)include/config.h ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "... booting from 8-bit flash" ; \ - echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ - echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \ + echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ + echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ echo "... with 32 MB Flash" ; \ - echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \ + echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ fi; \ else \ echo "... booting from 64-bit flash" ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ echo "... with 32 MB Flash" ; \ - echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \ - echo "TEXT_BASE = 0x40000000" >board/pm826/config.tmp ; \ + echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ + echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \ else \ - echo "TEXT_BASE = 0xFF000000" >board/pm826/config.tmp ; \ + echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ fi; \ fi - @./mkconfig -a PM826 ppc mpc8260 pm826 + @$(MKCONFIG) -a PM826 ppc mpc8260 pm826 PM828_config \ PM828_PCI_config \ PM828_ROMBOOT_config \ PM828_ROMBOOT_PCI_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/pm826 @if [ "$(findstring _PCI_,$@)" ] ; then \ - echo "#define CONFIG_PCI" >>include/config.h ; \ + echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ echo "... with PCI enabled" ; \ else \ - >include/config.h ; \ + >$(obj)include/config.h ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "... booting from 8-bit flash" ; \ - echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ - echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \ + echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ + echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ fi - @./mkconfig -a PM828 ppc mpc8260 pm828 + @$(MKCONFIG) -a PM828 ppc mpc8260 pm828 ppmc8260_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 ppmc8260 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260 Rattler8248_config \ Rattler_config: unconfig + @mkdir -p $(obj)include $(if $(findstring 8248,$@), \ - @echo "#define CONFIG_MPC8248" > include/config.h) - @./mkconfig -a Rattler ppc mpc8260 rattler + @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) + @$(MKCONFIG) -a Rattler ppc mpc8260 rattler RPXsuper_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 rpxsuper + @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper rsdproto_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 rsdproto + @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto sacsng_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 sacsng + @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng sbc8260_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 sbc8260 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260 SCM_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 SCM siemens + @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens TQM8255_AA_config \ TQM8260_AA_config \ @@ -1292,6 +1503,7 @@ TQM8260_AG_config \ TQM8260_AH_config \ TQM8260_AI_config \ TQM8265_AA_config: unconfig + @mkdir -p $(obj)include @case "$@" in \ TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ @@ -1305,205 +1517,222 @@ TQM8265_AA_config: unconfig TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ esac; \ - >include/config.h ; \ + >$(obj)include/config.h ; \ if [ "$${CTYPE}" != "MPC8260" ] ; then \ - echo "#define CONFIG_$${CTYPE}" >>include/config.h ; \ + echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ fi; \ - echo "#define CONFIG_$${CFREQ}MHz" >>include/config.h ; \ + echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ echo "... with $${CFREQ}MHz system clock" ; \ if [ "$${CACHE}" == "yes" ] ; then \ - echo "#define CONFIG_L2_CACHE" >>include/config.h ; \ + echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ echo "... with L2 Cache support" ; \ else \ - echo "#undef CONFIG_L2_CACHE" >>include/config.h ; \ + echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ echo "... without L2 Cache support" ; \ fi; \ if [ "$${BMODE}" == "60x" ] ; then \ - echo "#define CONFIG_BUSMODE_60x" >>include/config.h ; \ + echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ echo "... with 60x Bus Mode" ; \ else \ - echo "#undef CONFIG_BUSMODE_60x" >>include/config.h ; \ + echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ echo "... without 60x Bus Mode" ; \ fi - @./mkconfig -a TQM8260 ppc mpc8260 tqm8260 + @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 VoVPN-GW_66MHz_config \ VoVPN-GW_100MHz_config: unconfig - @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h - @./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk + @mkdir -p $(obj)include + @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h + @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk ZPC1900_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 zpc1900 + @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900 ######################################################################### ## Coldfire ######################################################################### cobra5272_config : unconfig - @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272 + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 EB+MCF-EV123_config : unconfig - @ >include/config.h - @echo "TEXT_BASE = 0xFFE00000"|tee board/BuS/EB+MCF-EV123/textbase.mk - @./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS + @mkdir -p $(obj)include + @mkdir -p $(obj)board/BuS/EB+MCF-EV123 + @ >$(obj)include/config.h + @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk + @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS EB+MCF-EV123_internal_config : unconfig - @ >include/config.h - @echo "TEXT_BASE = 0xF0000000"|tee board/BuS/EB+MCF-EV123/textbase.mk - @./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS + @mkdir -p $(obj)include + @mkdir -p $(obj)board/BuS/EB+MCF-EV123 + @ >$(obj)include/config.h + @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk + @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS M5271EVB_config : unconfig - @./mkconfig $(@:_config=) m68k mcf52x2 m5271evb + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb M5272C3_config : unconfig - @./mkconfig $(@:_config=) m68k mcf52x2 m5272c3 + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 M5282EVB_config : unconfig - @./mkconfig $(@:_config=) m68k mcf52x2 m5282evb + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb TASREG_config : unconfig - @./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd r5200_config : unconfig - @./mkconfig $(@:_config=) m68k mcf52x2 r5200 + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200 ######################################################################### ## MPC83xx Systems ######################################################################### MPC8349ADS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349ads TQM834x_config: unconfig - @./mkconfig $(@:_config=) ppc mpc83xx tqm834x + @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x MPC8349EMDS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc83xx mpc8349emds + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds ######################################################################### ## MPC85xx Systems ######################################################################### MPC8540ADS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads + @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads MPC8540EVAL_config \ MPC8540EVAL_33_config \ MPC8540EVAL_66_config \ MPC8540EVAL_33_slave_config \ MPC8540EVAL_66_slave_config: unconfig - @echo "" >include/config.h ; \ + @mkdir -p $(obj)include + @echo "" >$(obj)include/config.h ; \ if [ "$(findstring _33_,$@)" ] ; then \ echo -n "... 33 MHz PCI" ; \ else \ - echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \ + echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ echo -n "... 66 MHz PCI" ; \ fi ; \ if [ "$(findstring _slave_,$@)" ] ; then \ - echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \ + echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ echo " slave" ; \ else \ echo " host" ; \ fi - @./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval + @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval MPC8560ADS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads + @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads MPC8541CDS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds + @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8541cds cds MPC8548CDS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds + @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8548cds cds MPC8555CDS_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds + @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8555cds cds PM854_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx pm854 + @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854 PM856_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx pm856 + @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856 sbc8540_config \ sbc8540_33_config \ sbc8540_66_config: unconfig + @mkdir -p $(obj)include @if [ "$(findstring _66_,$@)" ] ; then \ - echo "#define CONFIG_PCI_66" >>include/config.h ; \ + echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ echo "... 66 MHz PCI" ; \ else \ - >include/config.h ; \ + >$(obj)include/config.h ; \ echo "... 33 MHz PCI" ; \ fi - @./mkconfig -a SBC8540 ppc mpc85xx sbc8560 + @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560 sbc8560_config \ sbc8560_33_config \ sbc8560_66_config: unconfig + @mkdir -p $(obj)include @if [ "$(findstring _66_,$@)" ] ; then \ - echo "#define CONFIG_PCI_66" >>include/config.h ; \ + echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ echo "... 66 MHz PCI" ; \ else \ - >include/config.h ; \ + >$(obj)include/config.h ; \ echo "... 33 MHz PCI" ; \ fi - @./mkconfig -a sbc8560 ppc mpc85xx sbc8560 + @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560 stxgp3_config: unconfig - @./mkconfig $(@:_config=) ppc mpc85xx stxgp3 + @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 TQM8540_config \ TQM8541_config \ TQM8555_config \ TQM8560_config: unconfig + @mkdir -p $(obj)include @CTYPE=$(subst TQM,,$(@:_config=)); \ - >include/config.h ; \ + >$(obj)include/config.h ; \ echo "... TQM"$${CTYPE}; \ - echo "#define CONFIG_MPC$${CTYPE}">>include/config.h; \ - echo "#define CONFIG_TQM$${CTYPE}">>include/config.h; \ - echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>include/config.h; \ - echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>include/config.h; \ - echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>include/config.h - @./mkconfig -a TQM85xx ppc mpc85xx tqm85xx + echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ + echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \ + echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ + echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \ + echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>$(obj)include/config.h + @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx + +######################################################################### +## MPC86xx Systems +######################################################################### + +MPC8641HPCN_config: unconfig + @./mkconfig $(@:_config=) ppc mpc86xx mpc8641hpcn + ######################################################################### ## 74xx/7xx Systems ######################################################################### AmigaOneG3SE_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI BAB7xx_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec CPCI750_config: unconfig - @./mkconfig CPCI750 ppc 74xx_7xx cpci750 esd + @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd DB64360_config: unconfig - @./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell + @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell DB64460_config: unconfig - @./mkconfig DB64460 ppc 74xx_7xx db64460 Marvell + @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell ELPPC_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec EVB64260_config \ EVB64260_750CX_config: unconfig - @./mkconfig EVB64260 ppc 74xx_7xx evb64260 + @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260 P3G4_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 PCIPPC2_config \ PCIPPC6_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2 + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 ZUMA_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 ppmc7xx_config: unconfig - @./mkconfig $(@:_config=) ppc 74xx_7xx ppmc7xx + @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx #======================================================================== # ARM @@ -1513,19 +1742,19 @@ ppmc7xx_config: unconfig ######################################################################### assabet_config : unconfig - @./mkconfig $(@:_config=) arm sa1100 assabet + @$(MKCONFIG) $(@:_config=) arm sa1100 assabet dnp1110_config : unconfig - @./mkconfig $(@:_config=) arm sa1100 dnp1110 + @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110 gcplus_config : unconfig - @./mkconfig $(@:_config=) arm sa1100 gcplus + @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus lart_config : unconfig - @./mkconfig $(@:_config=) arm sa1100 lart + @$(MKCONFIG) $(@:_config=) arm sa1100 lart shannon_config : unconfig - @./mkconfig $(@:_config=) arm sa1100 shannon + @$(MKCONFIG) $(@:_config=) arm sa1100 shannon ######################################################################### ## ARM92xT Systems @@ -1538,16 +1767,16 @@ xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$ xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) at91rm9200dk_config : unconfig - @./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200 + @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200 cmc_pu2_config : unconfig - @./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 + @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 csb637_config : unconfig - @./mkconfig $(@:_config=) arm arm920t csb637 NULL at91rm9200 + @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 mp2usb_config : unconfig - @./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200 + @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 ######################################################################## @@ -1577,34 +1806,35 @@ cp1026_config: unconfig @board/integratorcp/split_by_variant.sh $@ kb9202_config : unconfig - @./mkconfig $(@:_config=) arm arm920t kb9202 NULL at91rm9200 + @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 lpd7a400_config \ lpd7a404_config: unconfig - @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x + @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x mx1ads_config : unconfig - @./mkconfig $(@:_config=) arm arm920t mx1ads NULL imx + @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx mx1fs2_config : unconfig - @./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx + @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx netstar_32_config \ netstar_config: unconfig + @mkdir -p $(obj)include @if [ "$(findstring _32_,$@)" ] ; then \ echo "... 32MB SDRAM" ; \ - echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>include/config.h ; \ + echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>$(obj)include/config.h ; \ else \ echo "... 64MB SDRAM" ; \ - echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>include/config.h ; \ + echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>$(obj)include/config.h ; \ fi - @./mkconfig -a netstar arm arm925t netstar + @$(MKCONFIG) -a netstar arm arm925t netstar omap1510inn_config : unconfig - @./mkconfig $(@:_config=) arm arm925t omap1510inn + @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn omap5912osk_config : unconfig - @./mkconfig $(@:_config=) arm arm926ejs omap5912osk NULL omap + @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap omap1610inn_config \ omap1610inn_cs0boot_config \ @@ -1614,72 +1844,76 @@ omap1610h2_config \ omap1610h2_cs0boot_config \ omap1610h2_cs3boot_config \ omap1610h2_cs_autoboot_config: unconfig + @mkdir -p $(obj)include @if [ "$(findstring _cs0boot_, $@)" ] ; then \ - echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \ + echo "#define CONFIG_CS0_BOOT" >> .$(obj)/include/config.h ; \ echo "... configured for CS0 boot"; \ elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ - echo "#define CONFIG_CS_AUTOBOOT" >> ./include/config.h ; \ + echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)./include/config.h ; \ echo "... configured for CS_AUTO boot"; \ else \ - echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \ + echo "#define CONFIG_CS3_BOOT" >> $(obj)./include/config.h ; \ echo "... configured for CS3 boot"; \ fi; - @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap + @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap omap730p2_config \ omap730p2_cs0boot_config \ omap730p2_cs3boot_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _cs0boot_, $@)" ] ; then \ - echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \ + echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ echo "... configured for CS0 boot"; \ else \ - echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \ + echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ echo "... configured for CS3 boot"; \ fi; - @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap + @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap sbc2410x_config: unconfig - @./mkconfig $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 + @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 scb9328_config : unconfig - @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx + @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx smdk2400_config : unconfig - @./mkconfig $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 + @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 smdk2410_config : unconfig - @./mkconfig $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 + @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 SX1_config : unconfig - @./mkconfig $(@:_config=) arm arm925t sx1 + @$(MKCONFIG) $(@:_config=) arm arm925t sx1 # TRAB default configuration: 8 MB Flash, 32 MB RAM trab_config \ trab_bigram_config \ trab_bigflash_config \ trab_old_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @mkdir -p $(obj)board/trab + @ >$(obj)include/config.h @[ -z "$(findstring _bigram,$@)" ] || \ - { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \ - echo "#define CONFIG_RAM_32MB" >>include/config.h ; \ + { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ + echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ echo "... with 8 MB Flash, 32 MB RAM" ; \ } @[ -z "$(findstring _bigflash,$@)" ] || \ - { echo "#define CONFIG_FLASH_16MB" >>include/config.h ; \ - echo "#define CONFIG_RAM_16MB" >>include/config.h ; \ + { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ + echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ echo "... with 16 MB Flash, 16 MB RAM" ; \ - echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \ + echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } @[ -z "$(findstring _old,$@)" ] || \ - { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \ - echo "#define CONFIG_RAM_16MB" >>include/config.h ; \ + { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ + echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ echo "... with 8 MB Flash, 16 MB RAM" ; \ - echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \ + echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } - @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 + @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 VCMA9_config : unconfig - @./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0 + @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 #======================================================================== # ARM supplied Versatile development boards @@ -1691,117 +1925,120 @@ versatilepb_config : unconfig voiceblue_smallflash_config \ voiceblue_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/voiceblue @if [ "$(findstring _smallflash_,$@)" ] ; then \ echo "... boot from lower flash bank" ; \ - echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \ - echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \ + echo "#define VOICEBLUE_SMALL_FLASH" >>$(obj)include/config.h ; \ + echo "VOICEBLUE_SMALL_FLASH=y" >$(obj)board/voiceblue/config.tmp ; \ else \ echo "... boot from upper flash bank" ; \ - >include/config.h ; \ - echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \ + >$(obj)include/config.h ; \ + echo "VOICEBLUE_SMALL_FLASH=n" >$(obj)board/voiceblue/config.tmp ; \ fi - @./mkconfig -a voiceblue arm arm925t voiceblue + @$(MKCONFIG) -a voiceblue arm arm925t voiceblue cm4008_config : unconfig - @./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695 + @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 cm41xx_config : unconfig - @./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695 + @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 gth2_config : unconfig - @ >include/config.h - @echo "#define CONFIG_GTH2 1" >>include/config.h - @./mkconfig -a gth2 mips mips gth2 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_GTH2 1" >>$(obj)include/config.h + @$(MKCONFIG) -a gth2 mips mips gth2 ######################################################################### ## S3C44B0 Systems ######################################################################### B2_config : unconfig - @./mkconfig $(@:_config=) arm s3c44b0 B2 dave + @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave ######################################################################### ## ARM720T Systems ######################################################################### armadillo_config: unconfig - @./mkconfig $(@:_config=) arm arm720t armadillo + @$(MKCONFIG) $(@:_config=) arm arm720t armadillo ep7312_config : unconfig - @./mkconfig $(@:_config=) arm arm720t ep7312 + @$(MKCONFIG) $(@:_config=) arm arm720t ep7312 impa7_config : unconfig - @./mkconfig $(@:_config=) arm arm720t impa7 + @$(MKCONFIG) $(@:_config=) arm arm720t impa7 modnet50_config : unconfig - @./mkconfig $(@:_config=) arm arm720t modnet50 + @$(MKCONFIG) $(@:_config=) arm arm720t modnet50 evb4510_config : unconfig - @./mkconfig $(@:_config=) arm arm720t evb4510 + @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 ######################################################################### ## XScale Systems ######################################################################### adsvix_config : unconfig - @./mkconfig $(@:_config=) arm pxa adsvix + @$(MKCONFIG) $(@:_config=) arm pxa adsvix cerf250_config : unconfig - @./mkconfig $(@:_config=) arm pxa cerf250 + @$(MKCONFIG) $(@:_config=) arm pxa cerf250 cradle_config : unconfig - @./mkconfig $(@:_config=) arm pxa cradle + @$(MKCONFIG) $(@:_config=) arm pxa cradle csb226_config : unconfig - @./mkconfig $(@:_config=) arm pxa csb226 + @$(MKCONFIG) $(@:_config=) arm pxa csb226 delta_config : - @./mkconfig $(@:_config=) arm pxa delta + @$(MKCONFIG) $(@:_config=) arm pxa delta innokom_config : unconfig - @./mkconfig $(@:_config=) arm pxa innokom + @$(MKCONFIG) $(@:_config=) arm pxa innokom ixdp425_config : unconfig - @./mkconfig $(@:_config=) arm ixp ixdp425 + @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 ixdpg425_config : unconfig - @./mkconfig $(@:_config=) arm ixp ixdp425 + @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 lubbock_config : unconfig - @./mkconfig $(@:_config=) arm pxa lubbock + @$(MKCONFIG) $(@:_config=) arm pxa lubbock pleb2_config : unconfig - @./mkconfig $(@:_config=) arm pxa pleb2 + @$(MKCONFIG) $(@:_config=) arm pxa pleb2 logodl_config : unconfig - @./mkconfig $(@:_config=) arm pxa logodl + @$(MKCONFIG) $(@:_config=) arm pxa logodl pdnb3_config : unconfig - @./mkconfig $(@:_config=) arm ixp pdnb3 prodrive + @$(MKCONFIG) $(@:_config=) arm ixp pdnb3 prodrive pxa255_idp_config: unconfig - @./mkconfig $(@:_config=) arm pxa pxa255_idp + @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp wepep250_config : unconfig - @./mkconfig $(@:_config=) arm pxa wepep250 + @$(MKCONFIG) $(@:_config=) arm pxa wepep250 xaeniax_config : unconfig - @./mkconfig $(@:_config=) arm pxa xaeniax + @$(MKCONFIG) $(@:_config=) arm pxa xaeniax xm250_config : unconfig - @./mkconfig $(@:_config=) arm pxa xm250 + @$(MKCONFIG) $(@:_config=) arm pxa xm250 xsengine_config : unconfig - @./mkconfig $(@:_config=) arm pxa xsengine + @$(MKCONFIG) $(@:_config=) arm pxa xsengine zylonite_config : - @./mkconfig $(@:_config=) arm pxa zylonite + @$(MKCONFIG) $(@:_config=) arm pxa zylonite ######################################################################### ## ARM1136 Systems ######################################################################### omap2420h4_config : unconfig - @./mkconfig $(@:_config=) arm arm1136 omap2420h4 + @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 #======================================================================== # i386 @@ -1810,13 +2047,13 @@ omap2420h4_config : unconfig ## AMD SC520 CDP ######################################################################### sc520_cdp_config : unconfig - @./mkconfig $(@:_config=) i386 i386 sc520_cdp + @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp sc520_spunk_config : unconfig - @./mkconfig $(@:_config=) i386 i386 sc520_spunk + @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk sc520_spunk_rel_config : unconfig - @./mkconfig $(@:_config=) i386 i386 sc520_spunk + @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk #======================================================================== # MIPS @@ -1831,63 +2068,70 @@ incaip_100MHz_config \ incaip_133MHz_config \ incaip_150MHz_config \ incaip_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _100MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 100000000" >>include/config.h ; \ + { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ echo "... with 100MHz system clock" ; \ } @[ -z "$(findstring _133MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 133000000" >>include/config.h ; \ + { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ echo "... with 133MHz system clock" ; \ } @[ -z "$(findstring _150MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 150000000" >>include/config.h ; \ + { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ echo "... with 150MHz system clock" ; \ } - @./mkconfig -a $(call xtract_incaip,$@) mips mips incaip + @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip tb0229_config: unconfig - @./mkconfig $(@:_config=) mips mips tb0229 + @$(MKCONFIG) $(@:_config=) mips mips tb0229 ######################################################################### ## MIPS32 AU1X00 ######################################################################### dbau1000_config : unconfig - @ >include/config.h - @echo "#define CONFIG_DBAU1000 1" >>include/config.h - @./mkconfig -a dbau1x00 mips mips dbau1x00 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_DBAU1000 1" >>$(obj)include/config.h + @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 dbau1100_config : unconfig - @ >include/config.h - @echo "#define CONFIG_DBAU1100 1" >>include/config.h - @./mkconfig -a dbau1x00 mips mips dbau1x00 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_DBAU1100 1" >>$(obj)include/config.h + @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 dbau1500_config : unconfig - @ >include/config.h - @echo "#define CONFIG_DBAU1500 1" >>include/config.h - @./mkconfig -a dbau1x00 mips mips dbau1x00 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_DBAU1500 1" >>$(obj)include/config.h + @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 dbau1550_config : unconfig - @ >include/config.h - @echo "#define CONFIG_DBAU1550 1" >>include/config.h - @./mkconfig -a dbau1x00 mips mips dbau1x00 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h + @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 dbau1550_el_config : unconfig - @ >include/config.h - @echo "#define CONFIG_DBAU1550 1" >>include/config.h - @./mkconfig -a dbau1x00 mips mips dbau1x00 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h + @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 pb1000_config : unconfig - @ >include/config.h - @echo "#define CONFIG_PB1000 1" >>include/config.h - @./mkconfig -a pb1x00 mips mips pb1x00 + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h + @$(MKCONFIG) -a pb1x00 mips mips pb1x00 ######################################################################### ## MIPS64 5Kc ######################################################################### purple_config : unconfig - @./mkconfig $(@:_config=) mips mips purple + @$(MKCONFIG) $(@:_config=) mips mips purple #======================================================================== # Nios @@ -1899,80 +2143,83 @@ purple_config : unconfig DK1C20_safe_32_config \ DK1C20_standard_32_config \ DK1C20_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _safe_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'safe_32' configuration" ; \ } @[ -z "$(findstring _standard_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'standard_32' configuration" ; \ } @[ -z "$(findstring DK1C20_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \ } - @./mkconfig -a DK1C20 nios nios dk1c20 altera + @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera DK1S10_safe_32_config \ DK1S10_standard_32_config \ DK1S10_mtx_ldk_20_config \ DK1S10_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _safe_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'safe_32' configuration" ; \ } @[ -z "$(findstring _standard_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'standard_32' configuration" ; \ } @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ - { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \ echo "... NIOS 'mtx_ldk_20' configuration" ; \ } @[ -z "$(findstring DK1S10_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \ } - @./mkconfig -a DK1S10 nios nios dk1s10 altera + @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera ADNPESC1_DNPEVA2_base_32_config \ ADNPESC1_base_32_config \ ADNPESC1_config: unconfig - @ >include/config.h + @mkdir -p $(obj)include + @ >$(obj)include/config.h @[ -z "$(findstring _DNPEVA2,$@)" ] || \ - { echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \ + { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ echo "... DNP/EVA2 configuration" ; \ } @[ -z "$(findstring _base_32,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'base_32' configuration" ; \ } @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ - { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ + { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ echo "... NIOS 'base_32' configuration (DEFAULT)" ; \ } - @./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv + @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv ######################################################################### ## Nios-II ######################################################################### EP1C20_config : unconfig - @./mkconfig EP1C20 nios2 nios2 ep1c20 altera + @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera EP1S10_config : unconfig - @./mkconfig EP1S10 nios2 nios2 ep1s10 altera + @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera EP1S40_config : unconfig - @./mkconfig EP1S40 nios2 nios2 ep1s40 altera + @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera PK1C20_config : unconfig - @./mkconfig PK1C20 nios2 nios2 pk1c20 psyent + @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent PCI5441_config : unconfig - @./mkconfig PCI5441 nios2 nios2 pci5441 psyent + @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent #======================================================================== # MicroBlaze @@ -1981,62 +2228,82 @@ PCI5441_config : unconfig ## Microblaze ######################################################################### suzaku_config: unconfig - @ >include/config.h - @echo "#define CONFIG_SUZAKU 1" >> include/config.h - @./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno + @mkdir -p $(obj)include + @ >$(obj)include/config.h + @echo "#define CONFIG_SUZAKU 1" >> $(obj)include/config.h + @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno ######################################################################### ## Blackfin ######################################################################### ezkit533_config : unconfig - @./mkconfig $(@:_config=) blackfin bf533 ezkit533 + @$(MKCONFIG) $(@:_config=) blackfin bf533 ezkit533 stamp_config : unconfig - @./mkconfig $(@:_config=) blackfin bf533 stamp + @$(MKCONFIG) $(@:_config=) blackfin bf533 stamp dspstamp_config : unconfig - @./mkconfig $(@:_config=) blackfin bf533 dsp_stamp + @$(MKCONFIG) $(@:_config=) blackfin bf533 dsp_stamp + +#======================================================================== +# AVR32 +#======================================================================== +######################################################################### +## AT32AP7xxx +######################################################################### + +atstk1002_config : unconfig + @./mkconfig $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000 ######################################################################### ######################################################################### ######################################################################### clean: - find . -type f \ + find $(OBJTREE) -type f \ \( -name 'core' -o -name '*.bak' -o -name '*~' \ -o -name '*.o' -o -name '*.a' \) -print \ | xargs rm -f - rm -f examples/hello_world examples/timer \ - examples/eepro100_eeprom examples/sched \ - examples/mem_to_mem_idma2intr examples/82559_eeprom \ - examples/smc91111_eeprom \ - examples/test_burst - rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr - rm -f tools/mpc86x_clk tools/ncb - rm -f tools/easylogo/easylogo tools/bmp_logo - rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend - rm -f tools/env/fw_printenv tools/env/fw_setenv - rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image - rm -f board/netstar/eeprom board/netstar/crcek - rm -f board/netstar/*.srec board/netstar/*.bin - rm -f board/trab/trab_fkt board/voiceblue/eeprom - rm -f board/integratorap/u-boot.lds board/integratorcp/u-boot.lds - rm -f include/bmp_logo.h + rm -f $(obj)examples/hello_world $(obj)examples/timer \ + $(obj)examples/eepro100_eeprom $(obj)examples/sched \ + $(obj)examples/mem_to_mem_idma2intr $(obj)examples/82559_eeprom \ + $(obj)examples/smc91111_eeprom $(obj)examples/interrupt \ + $(obj)examples/test_burst + rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \ + $(obj)tools/gen_eth_addr + rm -f $(obj)tools/mpc86x_clk $(obj)tools/ncb + rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo + rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend + rm -f $(obj)tools/env/fw_printenv $(obj)tools/env/fw_setenv + rm -f $(obj)board/cray/L1/bootscript.c $(obj)board/cray/L1/bootscript.image + rm -f $(obj)board/netstar/eeprom $(obj)board/netstar/crcek $(obj)board/netstar/crcit + rm -f $(obj)board/netstar/*.srec $(obj)board/netstar/*.bin + rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom + rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds + rm -f $(obj)include/bmp_logo.h + rm -f $(obj)nand_spl/u-boot-spl $(obj)nand_spl/u-boot-spl.map clobber: clean - find . -type f \( -name .depend \ + find $(OBJTREE) -type f \( -name .depend \ -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ -print0 \ | xargs -0 rm -f - rm -f $(OBJS) *.bak tags TAGS include/version_autogenerated.h - rm -fr *.*~ - rm -f u-boot u-boot.map u-boot.hex $(ALL) - rm -f tools/crc32.c tools/environment.c tools/env/crc32.c - rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c - rm -f include/asm/proc include/asm/arch include/asm - + rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS $(obj)include/version_autogenerated.h + rm -fr $(obj)*.*~ + rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) + rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c + rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c + rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm + [ ! -d $(OBJTREE)/nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f + +ifeq ($(OBJTREE),$(SRCTREE)) mrproper \ distclean: clobber unconfig +else +mrproper \ +distclean: clobber unconfig + rm -rf $(OBJTREE)/* +endif backup: F=`basename $(TOPDIR)` ; cd .. ; \ |