diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 694 |
1 files changed, 230 insertions, 464 deletions
@@ -467,7 +467,7 @@ CHANGELOG: unexpand -a | sed -e 's/\s\s*$$//' > $@ include/license.h: tools/bin2header COPYING - cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h + cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h ######################################################################### unconfig: @@ -518,20 +518,16 @@ digsy_mtc_RAMBOOT_config: unconfig @mkdir -p $(obj)board/digsy_mtc @ >$(obj)include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \ - echo "... with LOWBOOT configuration" ; \ - } + echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp @[ -z "$(findstring RAMBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \ - echo "... with RAMBOOT configuration" ; \ - } - @$(MKCONFIG) -a digsy_mtc powerpc mpc5xxx digsy_mtc + echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp + @$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc galaxy5200_LOWBOOT_config \ galaxy5200_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a galaxy5200 powerpc mpc5xxx galaxy5200 + @$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200 hmi1001_config: unconfig @$(MKCONFIG) hmi1001 powerpc mpc5xxx hmi1001 @@ -548,22 +544,15 @@ icecube_5200_DDR_LOWBOOT08_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/icecube @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { if [ "$(findstring DDR,$@)" ] ; \ + if [ "$(findstring DDR,$@)" ] ; \ then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ - fi ; \ - $(XECHO) "... with LOWBOOT configuration" ; \ - } + fi @[ -z "$(findstring LOWBOOT08,$@)" ] || \ - { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ - echo "... with 8 MB flash only" ; \ - $(XECHO) "... with LOWBOOT configuration" ; \ - } + echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp @[ -z "$(findstring DDR,$@)" ] || \ - { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ - $(XECHO) "... DDR memory revision" ; \ - } - @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube + echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube jupiter_config: unconfig @$(MKCONFIG) jupiter powerpc mpc5xxx jupiter @@ -580,17 +569,12 @@ lite5200b_LOWBOOT_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/icecube @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h - @ $(XECHO) "... DDR memory revision" @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h @[ -z "$(findstring _PM_,$@)" ] || \ - { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ - $(XECHO) "... with power management (low-power mode) support" ; \ - } + echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ - $(XECHO) "... with LOWBOOT configuration" ; \ - } - @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube + echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp + @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube mcc200_config \ mcc200_SDRAM_config \ @@ -606,38 +590,22 @@ prs200_highboot_config \ prs200_highboot_DDR_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/mcc200 - @[ -n "$(findstring highboot,$@)" ] || \ - { $(XECHO) "... with lowboot configuration" ; \ - } @[ -z "$(findstring highboot,$@)" ] || \ - { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ - $(XECHO) "... with highboot configuration" ; \ - } + echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp @[ -n "$(findstring _SDRAM,$@)" ] || \ - { if [ -n "$(findstring mcc200,$@)" ]; \ - then \ - $(XECHO) "... with DDR" ; \ - else \ - if [ -n "$(findstring _DDR,$@)" ];\ + if [ -n "$(findstring prs200,$@)" ]; \ + then \ + if [ -z "$(findstring _DDR,$@)" ];\ then \ - $(XECHO) "... with DDR" ; \ - else \ echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ - $(XECHO) "... with SDRAM" ; \ fi; \ - fi; \ - } + fi @[ -z "$(findstring _SDRAM,$@)" ] || \ - { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ - $(XECHO) "... with SDRAM" ; \ - } + echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h @[ -z "$(findstring COM12,$@)" ] || \ - { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ - $(XECHO) "... with console on COM12" ; \ - } + echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h @[ -z "$(findstring prs200,$@)" ] || \ - { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ - } + echo "#define CONFIG_PRS200" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200 mecp5200_config: unconfig @@ -657,7 +625,7 @@ MVBC_P_config: unconfig @mkdir -p $(obj)board/mvbc_p @ >$(obj)include/config.h @[ -z "$(findstring MVBC_P,$@)" ] || \ - { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } + echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a MVBC_P powerpc mpc5xxx mvbc_p matrix_vision MVSMR_config: unconfig @@ -673,10 +641,8 @@ pcm030_LOWBOOT_config: unconfig @mkdir -p $(obj)include $(obj)board/phytec/pcm030 @ >$(obj)include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \ - echo "... with LOWBOOT configuration" ; \ - } - @$(MKCONFIG) -a pcm030 powerpc mpc5xxx pcm030 phytec + echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp + @$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec pf5200_config: unconfig @$(MKCONFIG) pf5200 powerpc mpc5xxx pf5200 esd @@ -687,14 +653,10 @@ PM520_ROMBOOT_config \ PM520_ROMBOOT_DDR_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring DDR,$@)" ] || \ - { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ - $(XECHO) "... DDR memory revision" ; \ - } + echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h @[ -z "$(findstring ROMBOOT,$@)" ] || \ - { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ - $(XECHO) "... booting from 8-bit flash" ; \ - } - @$(MKCONFIG) -a PM520 powerpc mpc5xxx pm520 + echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520 smmaco4_config: unconfig @$(MKCONFIG) -a smmaco4 powerpc mpc5xxx tqm5200 tqc @@ -706,9 +668,7 @@ TB5200_B_config \ TB5200_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _B,$@)" ] || \ - { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ - $(XECHO) "... with MPC5200B processor" ; \ - } + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h @$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc MINI5200_config \ @@ -725,18 +685,12 @@ Total5200_Rev2_lowboot_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/total5200 @[ -n "$(findstring Rev,$@)" ] || \ - { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ - $(XECHO) "... revision 1 board" ; \ - } + echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h @[ -z "$(findstring Rev2_,$@)" ] || \ - { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ - $(XECHO) "... revision 2 board" ; \ - } + echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h @[ -z "$(findstring lowboot_,$@)" ] || \ - { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ - $(XECHO) "... with lowboot configuration" ; \ - } - @$(MKCONFIG) -a Total5200 powerpc mpc5xxx total5200 + echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp + @$(MKCONFIG) -n $@ -a Total5200 powerpc mpc5xxx total5200 cam5200_config \ cam5200_niosflash_config \ @@ -751,37 +705,26 @@ TQM5200_STK100_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/tqc/tqm5200 @[ -z "$(findstring cam5200,$@)" ] || \ - { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ - echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ - echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ - $(XECHO) "... TQM5200S on Cam5200" ; \ + { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ } @[ -z "$(findstring niosflash,$@)" ] || \ - { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ - $(XECHO) "... with NIOS flash driver" ; \ - } + echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h @[ -z "$(findstring fo300,$@)" ] || \ - { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ - $(XECHO) "... TQM5200 on FO300" ; \ - } + echo "#define CONFIG_FO300" >>$(obj)include/config.h @[ -z "$(findstring MiniFAP,$@)" ] || \ - { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ - $(XECHO) "... TQM5200_AC on MiniFAP" ; \ - } + echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h @[ -z "$(findstring STK100,$@)" ] || \ - { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ - $(XECHO) "... on a STK52XX.100 base board" ; \ - } + echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h @[ -z "$(findstring TQM5200_B,$@)" ] || \ - { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h @[ -z "$(findstring TQM5200S,$@)" ] || \ - { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ - echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ + { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ + echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ } @[ -z "$(findstring HIGHBOOT,$@)" ] || \ - { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ - } + echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp @$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc uc101_config: unconfig @@ -807,7 +750,7 @@ mpc5121ads_rev2_config \ @if [ "$(findstring rev2,$@)" ] ; then \ echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ fi - @$(MKCONFIG) -a mpc5121ads powerpc mpc512x mpc5121ads freescale + @$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale pdm360ng_config: unconfig @$(MKCONFIG) -a pdm360ng powerpc mpc512x pdm360ng @@ -816,17 +759,15 @@ pdm360ng_config: unconfig ## MPC8xx Systems ######################################################################### -Adder_config \ Adder87x_config \ AdderII_config \ +AdderUSB_config \ +Adder_config \ : unconfig @mkdir -p $(obj)include $(if $(findstring AdderII,$@), \ - @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) - @$(MKCONFIG) -a Adder powerpc mpc8xx adder - -AdderUSB_config: unconfig - @$(MKCONFIG) -a AdderUSB powerpc mpc8xx adder + @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) + @$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder ADS860_config \ FADS823_config \ @@ -834,7 +775,7 @@ FADS850SAR_config \ MPC86xADS_config \ MPC885ADS_config \ FADS860T_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx fads + @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8xx fads AMX860_config : unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx amx860 westel @@ -869,10 +810,8 @@ GEN860T_SC_config \ GEN860T_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _SC,$@)" ] || \ - { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ - $(XECHO) "With reduced H/W feature set (SC)..." ; \ - } - @$(MKCONFIG) -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t + echo "#define CONFIG_SC" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t GENIETV_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx genietv @@ -895,10 +834,8 @@ ICU862_100MHz_config \ ICU862_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _100MHz,$@)" ] || \ - { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ - $(XECHO) "... with 100MHz system clock" ; \ - } - @$(MKCONFIG) -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862 + echo "#define CONFIG_100MHz" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862 IP860_config : unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ip860 @@ -908,30 +845,24 @@ IVML24_128_config \ IVML24_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring IVML24_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h @[ -z "$(findstring IVML24_128_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h @[ -z "$(findstring IVML24_256_config,$@)" ] || \ - { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a IVML24 powerpc mpc8xx ivm + echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a IVML24 powerpc mpc8xx ivm IVMS8_256_config \ IVMS8_128_config \ IVMS8_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring IVMS8_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ - { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a IVMS8 powerpc mpc8xx ivm + echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm kmsupx4_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile @@ -950,7 +881,7 @@ lwmon_config: unconfig MBX_config \ MBX860T_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mbx8xx + @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8xx mbx8xx mgsuvd_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile @@ -964,14 +895,10 @@ NETVIA_V2_config \ NETVIA_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring NETVIA_config,$@)" ] || \ - { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ - $(XECHO) "... Version 1" ; \ - } + echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ - $(XECHO) "... Version 2" ; \ - } - @$(MKCONFIG) -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia + echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) @@ -979,12 +906,10 @@ NETPHONE_V2_config \ NETPHONE_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring NETPHONE_config,$@)" ] || \ - { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone + echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) @@ -998,24 +923,18 @@ NETTA_6412_config \ NETTA_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring ISDN_,$@)" ] || \ - { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h @[ -n "$(findstring ISDN_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ - } + echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h @[ -z "$(findstring 6412_,$@)" ] || \ - { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h @[ -n "$(findstring 6412_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ - } + echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ - { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ - { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a $(call xtract_NETTA,$@) powerpc mpc8xx netta + echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_NETTA,$@) powerpc mpc8xx netta xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) @@ -1023,28 +942,26 @@ NETTA2_V2_config \ NETTA2_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring NETTA2_config,$@)" ] || \ - { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ - } + echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ - { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2 + echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2 NC650_Rev1_config \ NC650_Rev2_config \ CP850_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring CP850,$@)" ] || \ - { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ - echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ - } + { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ + echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ + } @[ -z "$(findstring Rev1,$@)" ] || \ - { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ - } + { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ + } @[ -z "$(findstring Rev2,$@)" ] || \ - { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ - } - @$(MKCONFIG) -a NC650 powerpc mpc8xx nc650 + { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ + } + @$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650 NX823_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx nx823 @@ -1086,19 +1003,14 @@ RPXlite_DW_NVRAM_64_LCD_config \ RPXlite_DW_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _64,$@)" ] || \ - { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ - $(XECHO) "... with 64MHz system clock ..."; \ - } + echo "#define RPXlite_64MHz" >>$(obj)include/config.h @[ -z "$(findstring _LCD,$@)" ] || \ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ - $(XECHO) "... with LCD display ..."; \ } @[ -z "$(findstring _NVRAM,$@)" ] || \ - { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ - $(XECHO) "... with ENV in NVRAM ..."; \ - } - @$(MKCONFIG) -a RPXlite_DW powerpc mpc8xx RPXlite_dw + echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw rmu_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rmu @@ -1161,9 +1073,8 @@ virtlab2_config: unconfig @[ -z "$(findstring _LCD,$@)" ] || \ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ - $(XECHO) "... with LCD display" ; \ } - @$(MKCONFIG) -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc + @$(MKCONFIG) -n $@ -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc TTTech_config: unconfig @mkdir -p $(obj)include @@ -1253,25 +1164,21 @@ glacier_nand_config: unconfig @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h - @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc CATcenter_config \ CATcenter_25_config \ CATcenter_33_config: unconfig @mkdir -p $(obj)include - @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h - @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h + @echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h + @echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h @[ -z "$(findstring _25,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ - $(XECHO) "SysClk = 25MHz" ; \ - } + echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h @[ -z "$(findstring _33,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ - $(XECHO) "SysClk = 33MHz" ; \ - } - @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave + echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave CMS700_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cms700 esd @@ -1284,7 +1191,7 @@ CPCI4052_config \ CPCI405DT_config \ CPCI405AB_config: unconfig @mkdir -p $(obj)board/esd/cpci405 - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci405 esd + @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx cpci405 esd CPCIISER4_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpciiser4 esd @@ -1387,9 +1294,9 @@ haleakala_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/kilauea @mkdir -p $(obj)nand_spl/board/amcc/kilauea @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h - @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc korat_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx korat @@ -1448,7 +1355,7 @@ ocotea_config: unconfig OCRTC_config \ ORSG_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocrtc esd + @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx ocrtc esd p3p440_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx p3p440 prodrive @@ -1483,26 +1390,16 @@ PPChameleonEVB_ME_33_config \ PPChameleonEVB_HI_33_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring EVB_BA,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ - $(XECHO) "... BASIC model" ; \ - } + echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h @[ -z "$(findstring EVB_ME,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ - $(XECHO) "... MEDIUM model" ; \ - } + echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h @[ -z "$(findstring EVB_HI,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ - $(XECHO) "... HIGH-END model" ; \ - } + echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h @[ -z "$(findstring _25,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ - $(XECHO) "SysClk = 25MHz" ; \ - } + echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h @[ -z "$(findstring _33,$@)" ] || \ - { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ - $(XECHO) "SysClk = 33MHz" ; \ - } - @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave + echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave quad100hd_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx quad100hd @@ -1530,9 +1427,9 @@ rainier_nand_config: unconfig @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h - @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc sequoia_ramboot_config \ rainier_ramboot_config: unconfig @@ -1540,10 +1437,10 @@ rainier_ramboot_config: unconfig @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h - @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \ $(obj)board/amcc/sequoia/config.tmp + @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc taihu_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taihu amcc @@ -1577,7 +1474,7 @@ VOM405_config: unconfig W7OLMC_config \ W7OLMG_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc ppc4xx w7o + @$(MKCONFIG) -n $@ $(@:_config=) powerpc ppc4xx w7o # Walnut & Sycamore images are identical (recognized via PVR) walnut_config \ @@ -1641,7 +1538,7 @@ zeus_config: unconfig Alaska8220_config \ Yukon8220_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc mpc8220 alaska + @$(MKCONFIG) -n $@ $(@:_config=) powerpc mpc8220 alaska sorcery_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8220 sorcery @@ -1662,16 +1559,14 @@ BMW_config: unconfig CPC45_config \ CPC45_ROMBOOT_config: unconfig - @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc824x cpc45 - @cd $(obj)include ; \ + @mkdir -p $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ - $(XECHO) "... booting from 8-bit flash" ; \ + echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \ else \ - echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ - $(XECHO) "... booting from 64-bit flash" ; \ + echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ - echo "export CONFIG_BOOT_ROM" >> config.mk; + echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; + @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc824x cpc45 CU824_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc824x cu824 @@ -1739,33 +1634,29 @@ cogent_mpc8260_config: unconfig CPU86_config \ CPU86_ROMBOOT_config: unconfig - @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu86 - @cd $(obj)include ; \ + @mkdir -p $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ - $(XECHO) "... booting from 8-bit flash" ; \ + echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \ else \ - echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ - $(XECHO) "... booting from 64-bit flash" ; \ + echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ - echo "export CONFIG_BOOT_ROM" >> config.mk; + echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; + @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc8260 cpu86 CPU87_config \ CPU87_ROMBOOT_config: unconfig - @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu87 - @cd $(obj)include ; \ + @mkdir -p $(obj)include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ - $(XECHO) "... booting from 8-bit flash" ; \ + echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \ else \ - echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ - $(XECHO) "... booting from 64-bit flash" ; \ + echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ fi; \ - echo "export CONFIG_BOOT_ROM" >> config.mk; + echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; + @$(MKCONFIG) -n $@ $(call xtract_82xx,$@) powerpc mpc8260 cpu87 ep8248_config \ ep8248E_config : unconfig - @$(MKCONFIG) ep8248 powerpc mpc8260 ep8248 + @$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248 ep8260_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep8260 @@ -1791,7 +1682,7 @@ ISPAN_REVB_config: unconfig @if [ "$(findstring _REVB_,$@)" ] ; then \ echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a ISPAN powerpc mpc8260 ispan + @$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan mgcoge_config : unconfig @$(MKCONFIG) mgcoge powerpc mpc8260 mgcoge keymile @@ -1823,10 +1714,8 @@ PQ2FADS-ZU_66MHz_lowboot_config \ $(if $(findstring VR,$@), \ @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) @[ -z "$(findstring lowboot_,$@)" ] || \ - { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \ - $(XECHO) "... with lowboot configuration" ; \ - } - @$(MKCONFIG) -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale + echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp + @$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale MPC8266ADS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 mpc8266ads freescale @@ -1838,7 +1727,7 @@ muas3001_config : unconfig @if [ "$(findstring dev,$@)" ] ; then \ echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a muas3001 powerpc mpc8260 muas3001 + @$(MKCONFIG) -n $@ -a muas3001 powerpc mpc8260 muas3001 # PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash PM825_config \ @@ -1857,15 +1746,12 @@ PM826_ROMBOOT_BIGFLASH_config: unconfig >$(obj)include/config.h ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - $(XECHO) "... booting from 8-bit flash" ; \ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ - $(XECHO) "... with 32 MB Flash" ; \ echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ fi; \ else \ - $(XECHO) "... booting from 64-bit flash" ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ $(XECHO) "... with 32 MB Flash" ; \ echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ @@ -1874,7 +1760,7 @@ PM826_ROMBOOT_BIGFLASH_config: unconfig echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ fi; \ fi - @$(MKCONFIG) -a PM826 powerpc mpc8260 pm826 + @$(MKCONFIG) -n $@ -a PM826 powerpc mpc8260 pm826 PM828_config \ PM828_PCI_config \ @@ -1884,14 +1770,12 @@ PM828_ROMBOOT_PCI_config: unconfig @mkdir -p $(obj)board/pm826 @if [ "$(findstring _PCI_,$@)" ] ; then \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ - $(XECHO) "... with PCI enabled" ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ - $(XECHO) "... booting from 8-bit flash" ; \ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ fi - @$(MKCONFIG) -a PM828 powerpc mpc8260 pm828 + @$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828 ppmc8260_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ppmc8260 @@ -1900,8 +1784,8 @@ Rattler8248_config \ Rattler_config: unconfig @mkdir -p $(obj)include $(if $(findstring 8248,$@), \ - @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) - @$(MKCONFIG) -a Rattler powerpc mpc8260 rattler + @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) + @$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler RPXsuper_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rpxsuper @@ -1947,22 +1831,17 @@ TQM8265_AA_config: unconfig echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ fi; \ echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ - echo "... with $${CFREQ}MHz system clock" ; \ if [ "$${CACHE}" = "yes" ] ; then \ echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ - $(XECHO) "... with L2 Cache support" ; \ else \ echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ - $(XECHO) "... without L2 Cache support" ; \ fi; \ if [ "$${BMODE}" = "60x" ] ; then \ echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ - $(XECHO) "... with 60x Bus Mode" ; \ else \ echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ - $(XECHO) "... without 60x Bus Mode" ; \ fi - @$(MKCONFIG) -a TQM8260 powerpc mpc8260 tqm8260 tqc + @$(MKCONFIG) -n $@ -a TQM8260 powerpc mpc8260 tqm8260 tqc TQM8272_config: unconfig @$(MKCONFIG) TQM8272 powerpc mpc8260 tqm8272 tqc @@ -1971,7 +1850,7 @@ VoVPN-GW_66MHz_config \ VoVPN-GW_100MHz_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h - @$(MKCONFIG) -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk + @$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk ZPC1900_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc8260 zpc1900 @@ -1982,7 +1861,7 @@ ZPC1900_config: unconfig astro_mcf5373l_config \ astro_mcf5373l_RAM_config : unconfig - @$(MKCONFIG) -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro + @$(MKCONFIG) -n $@ -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro M5208EVBE_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale @@ -1999,16 +1878,14 @@ M52277EVB_stmicro_config : unconfig echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ - $(XECHO) "... with SPANSION boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ - $(XECHO) "... with ST Micro boot..." ; \ fi - @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale + @$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale M5235EVB_config \ M5235EVB_Flash16_config \ @@ -2026,7 +1903,7 @@ M5235EVB_Flash32_config: unconfig echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ fi - @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale + @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale M5249EVB_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale @@ -2044,13 +1921,13 @@ EB+MCF-EV123_config : unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/BuS/EB+MCF-EV123 @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk - @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS + @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS EB+MCF-EV123_internal_config : unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/BuS/EB+MCF-EV123 @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk - @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS + @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS EP2500_config: unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 ep2500 Mercury @@ -2082,7 +1959,7 @@ M5329BFEE_config : unconfig if [ "$${NAND}" != "0" ] ; then \ echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale + @$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale M5373EVB_config : unconfig @case "$@" in \ @@ -2102,17 +1979,15 @@ M54451EVB_stmicro_config : unconfig if [ "$${FLASH}" = "NOR" ] ; then \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ - $(XECHO) "... with NOR boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ - $(XECHO) "... with ST Micro boot..." ; \ fi; \ echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; - @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale + @$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale M54455EVB_config \ M54455EVB_atmel_config \ @@ -2136,24 +2011,20 @@ M54455EVB_stm33_config : unconfig echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ - $(XECHO) "... with INTEL boot..." ; \ fi; \ if [ "$${FLASH}" = "ATMEL" ] ; then \ echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ - $(XECHO) "... with ATMEL boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ - $(XECHO) "... with ST Micro boot..." ; \ fi; \ echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ - $(XECHO) "... with $${FREQ}Hz input clock" - @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale + @$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale M5475AFE_config \ M5475BFE_config \ @@ -2186,7 +2057,7 @@ M5475GFE_config : unconfig if [ "$${USB}" == "1" ] ; then \ echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale + @$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale M5485AFE_config \ M5485BFE_config \ @@ -2221,7 +2092,7 @@ M5485HFE_config : unconfig if [ "$${USB}" == "1" ] ; then \ echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ fi - @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale + @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale TASREG_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd @@ -2240,26 +2111,23 @@ MPC8313ERDB_NAND_66_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/freescale/mpc8313erdb @if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) -n "...33M ..." ; \ echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - $(XECHO) -n "...66M..." ; \ echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _NAND_,$@)" ] ; then \ - $(XECHO) -n "...NAND..." ; \ echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \ echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale @if [ "$(findstring _NAND_,$@)" ] ; then \ echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \ fi ; + @$(MKCONFIG) -n $@ -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale MPC8315ERDB_NAND_config \ MPC8315ERDB_config: unconfig - @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale MPC8323ERDB_config: unconfig @$(MKCONFIG) -a MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale @@ -2271,30 +2139,25 @@ MPC832XEMDS_SLAVE_config \ MPC832XEMDS_ATM_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _HOST_,$@)" ] ; then \ - $(XECHO) -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SLAVE_,$@)" ] ; then \ - $(XECHO) "...PCI SLAVE 66M" ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) -n "...33M ..." ; \ echo "#define PCI_33M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - $(XECHO) -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _ATM_,$@)" ] ; then \ - $(XECHO) -n "...ATM..." ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale + @$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale MPC8349EMDS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mpc8349emds freescale @@ -2311,7 +2174,7 @@ MPC8349ITXGP_config: unconfig @if [ "$(findstring LOWBOOT,$@)" ] ; then \ echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ fi - @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX powerpc mpc83xx mpc8349itx freescale + @$(MKCONFIG) -n $@ -a MPC8349ITX powerpc mpc83xx mpc8349itx freescale MPC8360EMDS_config \ MPC8360EMDS_HOST_33_config \ @@ -2320,49 +2183,42 @@ MPC8360EMDS_SLAVE_config \ MPC8360EMDS_ATM_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _HOST_,$@)" ] ; then \ - $(XECHO) -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SLAVE_,$@)" ] ; then \ - $(XECHO) "...PCI SLAVE 66M" ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) -n "...33M ..." ; \ echo "#define PCI_33M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ - $(XECHO) -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _ATM_,$@)" ] ; then \ - $(XECHO) -n "...ATM..." ; \ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale + @$(MKCONFIG) -n $@ -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale MPC8360ERDK_33_config \ MPC8360ERDK_66_config \ MPC8360ERDK_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) -n "... CLKIN 33MHz " ; \ echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\ fi ; - @$(MKCONFIG) -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale + @$(MKCONFIG) -n $@ -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale MPC837XEMDS_config \ MPC837XEMDS_HOST_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _HOST_,$@)" ] ; then \ - $(XECHO) -n "... PCI HOST " ; \ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale + @$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale MPC837XERDB_config: unconfig @$(MKCONFIG) -a MPC837XERDB powerpc mpc83xx mpc837xerdb freescale @@ -2373,29 +2229,27 @@ MVBLM7_config: unconfig sbc8349_config \ sbc8349_PCI_33_config \ sbc8349_PCI_66_config: unconfig - @$(MKCONFIG) -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349 + @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349 SIMPC8313_LP_config \ SIMPC8313_SP_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/sheldon/simpc8313 @if [ "$(findstring _LP_,$@)" ] ; then \ - $(XECHO) -n "...Large Page NAND..." ; \ echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \ fi ; \ if [ "$(findstring _SP_,$@)" ] ; then \ - $(XECHO) -n "...Small Page NAND..." ; \ echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon TQM834x_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc83xx tqm834x tqc caddy2_config \ vme8349_config: unconfig - @$(MKCONFIG) -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd + @$(MKCONFIG) -n $@ -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd edb9301_config \ edb9302_config \ @@ -2405,7 +2259,7 @@ edb9307a_config \ edb9312_config \ edb9315_config \ edb9315a_config: unconfig - @$(MKCONFIG) -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx + @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx ######################################################################### ## MPC85xx Systems @@ -2419,7 +2273,7 @@ MPC8536DS_SDCARD_config \ MPC8536DS_SPIFLASH_config \ MPC8536DS_36BIT_config \ MPC8536DS_config: unconfig - @$(MKCONFIG) -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale MPC8540ADS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8540ads freescale @@ -2428,21 +2282,15 @@ MPC8540EVAL_config \ MPC8540EVAL_33_config \ MPC8540EVAL_66_config \ MPC8540EVAL_33_slave_config \ -MPC8540EVAL_66_slave_config: unconfig +MPC8540EVAL_66_slave_config: unconfig @mkdir -p $(obj)include - @if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) "... 33 MHz PCI" ; \ - else \ + @if [ -z "$(findstring _33_,$@)" ] ; then \ echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ - $(XECHO) "... 66 MHz PCI" ; \ fi ; \ if [ "$(findstring _slave_,$@)" ] ; then \ echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ - $(XECHO) " slave" ; \ - else \ - $(XECHO) " host" ; \ fi - @$(MKCONFIG) -a MPC8540EVAL powerpc mpc85xx mpc8540eval + @$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval MPC8560ADS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8560ads freescale @@ -2452,9 +2300,8 @@ MPC8541CDS_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _legacy_,$@)" ] ; then \ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ - $(XECHO) "... legacy" ; \ fi - @$(MKCONFIG) -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale + @$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale MPC8544DS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8544ds freescale @@ -2464,18 +2311,16 @@ MPC8548CDS_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _legacy_,$@)" ] ; then \ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ - $(XECHO) "... legacy" ; \ fi - @$(MKCONFIG) -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale + @$(MKCONFIG) -n $@ -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale MPC8555CDS_legacy_config \ MPC8555CDS_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _legacy_,$@)" ] ; then \ echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ - $(XECHO) "... legacy" ; \ fi - @$(MKCONFIG) -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale + @$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale MPC8568MDS_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8568mds freescale @@ -2483,15 +2328,15 @@ MPC8568MDS_config: unconfig MPC8569MDS_ATM_config \ MPC8569MDS_NAND_config \ MPC8569MDS_config: unconfig - @$(MKCONFIG) -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale MPC8572DS_36BIT_config \ MPC8572DS_config: unconfig - @$(MKCONFIG) -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale P2020DS_36BIT_config \ P2020DS_config: unconfig - @$(MKCONFIG) -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale P1011RDB_config \ P1011RDB_NAND_config \ @@ -2509,7 +2354,7 @@ P2020RDB_config \ P2020RDB_NAND_config \ P2020RDB_SDCARD_config \ P2020RDB_SPIFLASH_config: unconfig - @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale + @$(MKCONFIG) -n $@ -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale PM854_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm854 @@ -2520,19 +2365,19 @@ PM856_config: unconfig sbc8540_config \ sbc8540_33_config \ sbc8540_66_config: unconfig - @$(MKCONFIG) -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560 + @$(MKCONFIG) -n $@ -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560 sbc8548_config \ sbc8548_PCI_33_config \ sbc8548_PCI_66_config \ sbc8548_PCI_33_PCIE_config \ sbc8548_PCI_66_PCIE_config: unconfig - @$(MKCONFIG) -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548 + @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548 sbc8560_config \ sbc8560_33_config \ sbc8560_66_config: unconfig - @$(MKCONFIG) -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560 + @$(MKCONFIG) -n $@ -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560 socrates_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx socrates @@ -2545,9 +2390,8 @@ stxssa_4M_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _4M_,$@)" ] ; then \ echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ - $(XECHO) "... with 4 MiB flash memory" ; \ fi - @$(MKCONFIG) -a stxssa powerpc mpc85xx stxssa stx + @$(MKCONFIG) -n $@ -a stxssa powerpc mpc85xx stxssa stx TQM8540_config \ TQM8541_config \ @@ -2559,13 +2403,12 @@ TQM8560_config: unconfig @mkdir -p $(obj)include @BTYPE=$(@:_config=); \ CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \ - $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \ echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h; - @$(MKCONFIG) -a TQM85xx powerpc mpc85xx tqm85xx tqc @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk; + @$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc XPEDITE5200_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5200 xes @@ -2585,9 +2428,8 @@ MPC8641HPCN_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _36BIT_,$@)" ] ; then \ echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ - $(XECHO) "... enabling 36-bit physical addressing." ; \ fi - @$(MKCONFIG) -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale + @$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale sbc8641d_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc mpc86xx sbc8641d @@ -2619,7 +2461,7 @@ ELPPC_config: unconfig EVB64260_config \ EVB64260_750CX_config: unconfig - @$(MKCONFIG) EVB64260 powerpc 74xx_7xx evb64260 + @$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260 mpc7448hpc2_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx mpc7448hpc2 freescale @@ -2635,11 +2477,11 @@ p3m7448_config: unconfig else \ echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ fi - @$(MKCONFIG) -a p3mx powerpc 74xx_7xx p3mx prodrive + @$(MKCONFIG) -n $@ -a p3mx powerpc 74xx_7xx p3mx prodrive PCIPPC2_config \ PCIPPC6_config: unconfig - @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx pcippc2 + @$(MKCONFIG) -n $@ $(@:_config=) powerpc 74xx_7xx pcippc2 ppmc7xx_config: unconfig @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx ppmc7xx @@ -2693,7 +2535,7 @@ CPUAT91_RAM_config \ CPUAT91_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 + @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 csb637_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 @@ -2731,21 +2573,17 @@ at91sam9g20ek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring 9g20,$@)" ] ; then \ echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ - $(XECHO) "... 9G20 Variant" ; \ else \ echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \ fi; @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ fi; - @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 at91sam9xeek_nandflash_config \ at91sam9xeek_dataflash_cs0_config \ @@ -2754,15 +2592,12 @@ at91sam9xeek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ fi; - @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 at91sam9261ek_nandflash_config \ at91sam9261ek_dataflash_cs0_config \ @@ -2775,21 +2610,17 @@ at91sam9g10ek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring 9g10,$@)" ] ; then \ echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ - $(XECHO) "... 9G10 Variant" ; \ else \ echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ fi; @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; - @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 at91sam9263ek_norflash_config \ at91sam9263ek_norflash_boot_config \ @@ -2800,19 +2631,15 @@ at91sam9263ek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ elif [ "$(findstring norflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NOR FLASH" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; @if [ "$(findstring norflash_boot,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... and boot from NOR FLASH" ; \ fi; - @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 at91sam9rlek_nandflash_config \ at91sam9rlek_dataflash_config \ @@ -2821,12 +2648,10 @@ at91sam9rlek_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; - @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 CPU9G20_128M_config \ CPU9G20_config \ @@ -2834,7 +2659,7 @@ CPU9260_128M_config \ CPU9260_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91 + @$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91 meesc_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91 @@ -2853,19 +2678,15 @@ at91sam9g45ekes_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring 9m10,$@)" ] ; then \ echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ - $(XECHO) "... 9M10G45 Variant" ; \ else \ echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ fi; - @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in NAND FLASH" ; \ else \ echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ - $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; - @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 + @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 otc570_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91 @@ -2878,7 +2699,7 @@ SBC35_A9G20_EEPROM_config \ SBC35_A9G20_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 + @$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 TNY_A9G20_NANDFLASH_config \ TNY_A9G20_EEPROM_config \ @@ -2888,7 +2709,7 @@ TNY_A9260_EEPROM_config \ TNY_A9260_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91 + @$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91 ######################################################################## ## ARM Integrator boards - see doc/README-integrator for more info. @@ -2916,32 +2737,17 @@ cp922_XA10_config \ cp1026_config: unconfig @board/armltd/integrator/split_by_variant.sh cp $@ -da830evm_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs da830evm davinci davinci - -davinci_dvevm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci - -davinci_schmoogie_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci - -davinci_sffsdr_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci - -davinci_sonata_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci - -davinci_dm355evm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci - -davinci_dm355leopard_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci - -davinci_dm365evm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci - -davinci_dm6467evm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci +da830evm_config \ +davinci_dvevm_config \ +davinci_schmoogie_config \ +davinci_sffsdr_config \ +davinci_sonata_config \ +davinci_dm355evm_config \ +davinci_dm355leopard_config \ +davinci_dm365evm_config \ +davinci_dm6467evm_config : unconfig + @$(MKCONFIG) -n $@ $(@:_config=) arm arm926ejs \ + $(subst davinci_,,$(@:_config=)) davinci davinci guruplug_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood @@ -2952,7 +2758,7 @@ imx27lite_config: unconfig lpd7a400_config \ lpd7a404_config: unconfig - @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x + @$(MKCONFIG) -n $(@:_config=) arm lh7a40x lpd7a40x mv88f6281gtw_ge_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood @@ -2972,11 +2778,8 @@ nhk8815_onenand_config: unconfig @ > $(obj)include/config.h @if [ "$(findstring _onenand, $@)" ] ; then \ echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ - $(XECHO) "... configured to boot from OneNand Flash"; \ - else \ - $(XECHO) "... configured to boot from Nand Flash"; \ fi - @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik + @$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik omap1510inn_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti @@ -2994,15 +2797,12 @@ omap1610h2_cs_autoboot_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _cs0boot_, $@)" ] ; then \ echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ - $(XECHO) "... configured for CS0 boot"; \ elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for CS_AUTO boot"; \ else \ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for CS3 boot"; \ fi; - @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap + @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap omap5912osk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap @@ -3018,12 +2818,10 @@ omap730p2_cs3boot_config : unconfig @mkdir -p $(obj)include @if [ "$(findstring _cs0boot_, $@)" ] ; then \ echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for CS0 boot"; \ else \ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for CS3 boot"; \ fi; - @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap + @$(MKCONFIG) -n $@ -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap rd6281a_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood @@ -3059,12 +2857,10 @@ SX1_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for stdout serial"; \ else \ echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ - $(XECHO) "... configured for stdout usbtty"; \ fi; - @$(MKCONFIG) SX1 arm arm925t sx1 + @$(MKCONFIG) -n $@ SX1 arm arm925t sx1 # TRAB default configuration: 8 MB Flash, 32 MB RAM xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) @@ -3078,25 +2874,22 @@ trab_old_config: unconfig @[ -z "$(findstring _bigram,$@)" ] || \ { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ - $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \ } @[ -z "$(findstring _bigflash,$@)" ] || \ { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ - $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } @[ -z "$(findstring _old,$@)" ] || \ { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ - $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ } - @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 + @$(MKCONFIG) -n $@ -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 tx25_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25 VCMA9_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 @@ -3233,9 +3026,8 @@ scpu_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring scpu_,$@)" ] ; then \ echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ - $(XECHO) "... on SCPU board variant" ; \ fi - @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive + @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive pxa255_idp_config: unconfig @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp @@ -3246,7 +3038,7 @@ trizepsiv_config : unconfig @if [ "$(findstring polaris,$@)" ] ; then \ echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \ fi; - @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv + @$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv wepep250_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa wepep250 @@ -3270,8 +3062,8 @@ zylonite_config : apollon_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h - @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx imx31_litekit_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31 @@ -3282,7 +3074,7 @@ imx31_phycore_config : unconfig @if [ -n "$(findstring _eet_,$@)" ]; then \ echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \ fi - @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 + @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 mx31ads_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 @@ -3296,7 +3088,7 @@ mx31pdk_nand_config : unconfig echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \ fi - @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 + @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31 mx51evk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51 @@ -3315,14 +3107,13 @@ smdk6400_config : unconfig @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ - $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \ else \ echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ - $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \ fi - @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + @$(MKCONFIG) $(subst _noUSB,,$(@:_config=)) arm arm1176 smdk6400 samsung s3c64xx #======================================================================== # i386 @@ -3349,26 +3140,18 @@ sc520_spunk_rel_config : unconfig ## MIPS32 4Kc ######################################################################### -xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) - incaip_100MHz_config \ incaip_133MHz_config \ incaip_150MHz_config \ incaip_config: unconfig @mkdir -p $(obj)include @[ -z "$(findstring _100MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ - $(XECHO) "... with 100MHz system clock" ; \ - } + echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h @[ -z "$(findstring _133MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ - $(XECHO) "... with 133MHz system clock" ; \ - } + echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h @[ -z "$(findstring _150MHz,$@)" ] || \ - { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ - $(XECHO) "... with 150MHz system clock" ; \ - } - @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip + echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h + @$(MKCONFIG) -n $@ -a incaip mips mips incaip tb0229_config: unconfig @$(MKCONFIG) $(@:_config=) mips mips tb0229 @@ -3386,27 +3169,17 @@ vct_platinumavc_small_config \ vct_platinumavc_onenand_config \ vct_platinumavc_onenand_small_config: unconfig @mkdir -p $(obj)include - @if [ "$(findstring _premium,$@)" ] ; then \ - echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \ - $(XECHO) "... on Premium board variant" ; \ - fi - @if [ "$(findstring _platinum_,$@)" ] ; then \ - echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \ - $(XECHO) "... on Platinum board variant" ; \ - fi - @if [ "$(findstring _platinumavc,$@)" ] ; then \ - echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \ - $(XECHO) "... on PlatinumAVC board variant" ; \ - fi - @if [ "$(findstring _onenand,$@)" ] ; then \ - echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \ - $(XECHO) "... on OneNAND board variant" ; \ - fi - @if [ "$(findstring _small,$@)" ] ; then \ - echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \ - $(XECHO) "... stripped down image variant" ; \ - fi - @$(MKCONFIG) -a vct mips mips vct micronas + @[ -z "$(findstring _premium,$@)" ] || \ + echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h + @[ -z "$(findstring _platinum_,$@)" ] || \ + echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h + @[ -z "$(findstring _platinumavc,$@)" ] || \ + echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h + @[ -z "$(findstring _onenand,$@)" ] || \ + echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h + @[ -z "$(findstring _small,$@)" ] || \ + echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h + @$(MKCONFIG) -n $@ -a vct mips mips vct micronas ######################################################################### ## MIPS32 AU1X00 @@ -3528,15 +3301,9 @@ bf527-ezkit-v2_config : unconfig atngw100_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x -atstk1002_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x - -atstk1003_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x - -atstk1004_config : unconfig - @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x - +atstk1002_config \ +atstk1003_config \ +atstk1004_config \ atstk1006_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x @@ -3619,9 +3386,8 @@ sh7785lcr_config : unconfig echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x8ff80000" > \ $(obj)board/renesas/sh7785lcr/config.tmp ; \ - $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \ fi - @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas + @$(MKCONFIG) -n $@ -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas ap325rxa_config : unconfig @mkdir -p $(obj)include |