diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 223 |
1 files changed, 111 insertions, 112 deletions
@@ -1,10 +1,3 @@ -# -# (C) Copyright 2000-2013 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - VERSION = 2014 PATCHLEVEL = 10 SUBLEVEL = @@ -17,11 +10,9 @@ NAME = # Comments in this file are targeted only to the developer, do not # expect to learn how to build the kernel reading this file. -# Do not: -# o use make's built-in rules and variables -# (this increases performance and avoids hard-to-debug behaviour); -# o print "Entering directory ..."; -MAKEFLAGS += -rR --no-print-directory +# Do not use make's built-in rules and variables +# (this increases performance and avoids hard-to-debug behaviour); +MAKEFLAGS += -rR # Avoid funny character set dependencies unexport LC_ALL @@ -29,6 +20,9 @@ LC_COLLATE=C LC_NUMERIC=C export LC_COLLATE LC_NUMERIC +# Avoid interference with shell env settings +unexport GREP_OPTIONS + # We are using a recursive build, so we need to do a little thinking # to get the ordering right. # @@ -45,6 +39,29 @@ export LC_COLLATE LC_NUMERIC # descending is started. They are now explicitly listed as the # prepare rule. +# Beautify output +# --------------------------------------------------------------------------- +# +# Normally, we echo the whole command before executing it. By making +# that echo $($(quiet)$(cmd)), we now have the possibility to set +# $(quiet) to choose other forms of output instead, e.g. +# +# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ +# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< +# +# If $(quiet) is empty, the whole command will be printed. +# If it is set to "quiet_", only the short version will be printed. +# If it is set to "silent_", nothing will be printed at all, since +# the variable $(silent_cmd_cc_o_c) doesn't exist. +# +# A simple variant is to prefix commands with $(Q) - that's useful +# for commands that shall be hidden in non-verbose mode. +# +# $(Q)ln $@ :< +# +# If KBUILD_VERBOSE equals 0 then the above command will be hidden. +# If KBUILD_VERBOSE equals 1 then the above command is displayed. +# # To put more focus on warnings, be less verbose as default # Use 'make V=1' to see the full commands @@ -55,33 +72,28 @@ ifndef KBUILD_VERBOSE KBUILD_VERBOSE = 0 endif -# Call a source code checker (by default, "sparse") as part of the -# C compilation. -# -# Use 'make C=1' to enable checking of only re-compiled files. -# Use 'make C=2' to enable checking of *all* source files, regardless -# of whether they are re-compiled or not. -# -# See the file "Documentation/sparse.txt" for more details, including -# where to get the "sparse" utility. +ifeq ($(KBUILD_VERBOSE),1) + quiet = + Q = +else + quiet=quiet_ + Q = @ +endif -ifeq ("$(origin C)", "command line") - KBUILD_CHECKSRC = $(C) +# If the user is running make -s (silent mode), suppress echoing of +# commands + +ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 +ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) + quiet=silent_ endif -ifndef KBUILD_CHECKSRC - KBUILD_CHECKSRC = 0 +else # make-3.8x +ifneq ($(filter s% -s%,$(MAKEFLAGS)),) + quiet=silent_ endif - -# Use make M=dir to specify directory of external module to build -# Old syntax make ... SUBDIRS=$PWD is still supported -# Setting the environment variable KBUILD_EXTMOD take precedence -ifdef SUBDIRS - KBUILD_EXTMOD ?= $(SUBDIRS) endif -ifeq ("$(origin M)", "command line") - KBUILD_EXTMOD := $(M) -endif +export quiet Q KBUILD_VERBOSE # kbuild supports saving output files in a separate directory. # To locate output files in a separate directory two syntaxes are supported. @@ -98,7 +110,6 @@ endif # The O= assignment takes precedence over the KBUILD_OUTPUT environment # variable. - # KBUILD_SRC is set on invocation of make in OBJ directory # KBUILD_SRC is not intended to be used by the regular user (for now) ifeq ($(KBUILD_SRC),) @@ -131,10 +142,8 @@ $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make @: sub-make: FORCE - $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ - KBUILD_SRC=$(CURDIR) \ - KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \ - $(filter-out _all sub-make,$(MAKECMDGOALS)) + $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ + -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) # Leave processing to above invocation of make skip-makefile := 1 @@ -144,6 +153,39 @@ endif # ifeq ($(KBUILD_SRC),) # We process the rest of the Makefile if this is the final invocation of make ifeq ($(skip-makefile),) +# Do not print "Entering directory ...", +# but we want to display it when entering to the output directory +# so that IDEs/editors are able to understand relative filenames. +MAKEFLAGS += --no-print-directory + +# Call a source code checker (by default, "sparse") as part of the +# C compilation. +# +# Use 'make C=1' to enable checking of only re-compiled files. +# Use 'make C=2' to enable checking of *all* source files, regardless +# of whether they are re-compiled or not. +# +# See the file "Documentation/sparse.txt" for more details, including +# where to get the "sparse" utility. + +ifeq ("$(origin C)", "command line") + KBUILD_CHECKSRC = $(C) +endif +ifndef KBUILD_CHECKSRC + KBUILD_CHECKSRC = 0 +endif + +# Use make M=dir to specify directory of external module to build +# Old syntax make ... SUBDIRS=$PWD is still supported +# Setting the environment variable KBUILD_EXTMOD take precedence +ifdef SUBDIRS + KBUILD_EXTMOD ?= $(SUBDIRS) +endif + +ifeq ("$(origin M)", "command line") + KBUILD_EXTMOD := $(M) +endif + # If building an external module we do not care about the all: rule # but instead _all depend on modules PHONY += all @@ -153,8 +195,18 @@ else _all: modules endif -srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) -objtree := $(CURDIR) +ifeq ($(KBUILD_SRC),) + # building in the source tree + srctree := . +else + ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR))) + # building in a subdirectory of the source tree + srctree := .. + else + srctree := $(KBUILD_SRC) + endif +endif +objtree := . src := $(srctree) obj := $(objtree) @@ -262,52 +314,6 @@ endif export KBUILD_MODULES KBUILD_BUILTIN export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD -# Beautify output -# --------------------------------------------------------------------------- -# -# Normally, we echo the whole command before executing it. By making -# that echo $($(quiet)$(cmd)), we now have the possibility to set -# $(quiet) to choose other forms of output instead, e.g. -# -# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ -# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< -# -# If $(quiet) is empty, the whole command will be printed. -# If it is set to "quiet_", only the short version will be printed. -# If it is set to "silent_", nothing will be printed at all, since -# the variable $(silent_cmd_cc_o_c) doesn't exist. -# -# A simple variant is to prefix commands with $(Q) - that's useful -# for commands that shall be hidden in non-verbose mode. -# -# $(Q)ln $@ :< -# -# If KBUILD_VERBOSE equals 0 then the above command will be hidden. -# If KBUILD_VERBOSE equals 1 then the above command is displayed. - -ifeq ($(KBUILD_VERBOSE),1) - quiet = - Q = -else - quiet=quiet_ - Q = @ -endif - -# If the user is running make -s (silent mode), suppress echoing of -# commands - -ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 -ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) - quiet=silent_ -endif -else # make-3.8x -ifneq ($(filter s% -s%,$(MAKEFLAGS)),) - quiet=silent_ -endif -endif - -export quiet Q KBUILD_VERBOSE - # Look for make include files relative to root of kernel src MAKEFLAGS += --include-dir=$(srctree) @@ -780,6 +786,13 @@ quiet_cmd_pad_cat = CAT $@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ all: $(ALL-y) +ifneq ($(CONFIG_SYS_GENERIC_BOARD),y) + @echo "===================== WARNING ======================" + @echo "Please convert this board to generic board." + @echo "Otherwise it will be removed by the end of 2014." + @echo "See doc/README.generic-board for further information" + @echo "====================================================" +endif PHONY += dtbs dtbs dts/dt.dtb: checkdtc u-boot @@ -1220,13 +1233,12 @@ include/license.h: tools/bin2header COPYING # make distclean Remove editor backup files, patch leftover files and the like # Directories & files removed with 'make clean' -CLEAN_DIRS += $(MODVERDIR) -CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h - -# Directories & files removed with 'make clobber' -CLOBBER_DIRS += $(foreach d, spl tpl, $(patsubst %,$d/%, \ +CLEAN_DIRS += $(MODVERDIR) \ + $(foreach d, spl tpl, $(patsubst %,$d/%, \ $(filter-out include, $(shell ls -1 $d 2>/dev/null)))) -CLOBBER_FILES += u-boot* MLO* SPL System.map + +CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \ + u-boot* MLO* SPL System.map # Directories & files removed with 'make mrproper' MRPROPER_DIRS += include/config include/generated spl tpl \ @@ -1259,17 +1271,6 @@ clean: $(clean-dirs) -o -name modules.builtin -o -name '.tmp_*.o.*' \ -o -name '*.gcno' \) -type f -print | xargs rm -f -# clobber -# -clobber: rm-dirs := $(CLOBBER_DIRS) -clobber: rm-files := $(CLOBBER_FILES) - -PHONY += clobber - -clobber: clean - $(call cmd,rmdirs) - $(call cmd,rmfiles) - # mrproper - Delete all generated files, including .config # mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) @@ -1280,7 +1281,7 @@ PHONY += $(mrproper-dirs) mrproper archmrproper $(mrproper-dirs): $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) -mrproper: clobber $(mrproper-dirs) +mrproper: clean $(mrproper-dirs) $(call cmd,rmdirs) $(call cmd,rmfiles) @rm -f arch/*/include/asm/arch @@ -1304,9 +1305,7 @@ backup: help: @echo 'Cleaning targets:' - @echo ' clean - Remove most generated files but keep the config and' - @echo ' necessities for testing u-boot' - @echo ' clobber - Remove most generated files but keep the config' + @echo ' clean - Remove most generated files but keep the config' @echo ' mrproper - Remove all generated files + config + various backup files' @echo ' distclean - mrproper + remove editor backup and patch files' @echo '' @@ -1315,7 +1314,7 @@ help: @echo '' @echo 'Other generic targets:' @echo ' all - Build all necessary images depending on configuration' - @echo ' u-boot - Build the bare u-boot' + @echo '* u-boot - Build the bare u-boot' @echo ' dir/ - Build all files in dir and below' @echo ' dir/file.[oisS] - Build specified target only' @echo ' dir/file.lst - Build specified mixed source/assembly target only' @@ -1323,8 +1322,8 @@ help: @echo ' tags/ctags - Generate ctags file for editors' @echo ' etags - Generate etags file for editors' @echo ' cscope - Generate cscope index' - @echo ' ubootrelease - Output the release version string' - @echo ' ubootversion - Output the version stored in Makefile' + @echo ' ubootrelease - Output the release version string (use with make -s)' + @echo ' ubootversion - Output the version stored in Makefile (use with make -s)' @echo '' @echo 'Static analysers' @echo ' checkstack - Generate a list of stack hogs' @@ -1445,7 +1444,7 @@ endif # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir # Usage: # $(Q)$(MAKE) $(clean)=dir -clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj +clean := -f $(srctree)/scripts/Makefile.clean obj endif # skip-makefile |