diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 62 |
1 files changed, 45 insertions, 17 deletions
@@ -24,7 +24,7 @@ VERSION = 2013 PATCHLEVEL = 01 SUBLEVEL = -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else @@ -231,8 +231,8 @@ endif OBJS = $(CPUDIR)/start.o ifeq ($(CPU),x86) -OBJS += $(CPUDIR)/start16.o -OBJS += $(CPUDIR)/resetvec.o +RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/start16.o +RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/resetvec.o endif ifeq ($(CPU),ppc4xx) OBJS += $(CPUDIR)/resetvec.o @@ -241,7 +241,7 @@ ifeq ($(CPU),mpc85xx) OBJS += $(CPUDIR)/resetvec.o endif -OBJS := $(addprefix $(obj),$(OBJS)) +OBJS := $(addprefix $(obj),$(OBJS) $(RESET_OBJS-)) HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n) @@ -293,7 +293,10 @@ LIBS-y += drivers/net/libnet.o LIBS-y += drivers/net/phy/libphy.o LIBS-y += drivers/pci/libpci.o LIBS-y += drivers/pcmcia/libpcmcia.o -LIBS-y += drivers/power/libpower.o +LIBS-y += drivers/power/libpower.o \ + drivers/power/fuel_gauge/libfuel_gauge.o \ + drivers/power/pmic/libpmic.o \ + drivers/power/battery/libbattery.o LIBS-y += drivers/spi/libspi.o LIBS-y += drivers/dfu/libdfu.o ifeq ($(CPU),mpc83xx) @@ -320,6 +323,7 @@ LIBS-y += drivers/usb/eth/libusb_eth.o LIBS-y += drivers/usb/gadget/libusb_gadget.o LIBS-y += drivers/usb/host/libusb_host.o LIBS-y += drivers/usb/musb/libusb_musb.o +LIBS-y += drivers/usb/musb-new/libusb_musb-new.o LIBS-y += drivers/usb/phy/libusb_phy.o LIBS-y += drivers/usb/ulpi/libusb_ulpi.o LIBS-y += drivers/video/libvideo.o @@ -387,12 +391,12 @@ __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) ifneq ($(CONFIG_BOARD_SIZE_LIMIT),) BOARD_SIZE_CHECK = \ @actual=`wc -c $@ | awk '{print $$1}'`; \ - limit=$(CONFIG_BOARD_SIZE_LIMIT); \ + limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \ if test $$actual -gt $$limit; then \ - echo "$@ exceeds file size limit:"; \ - echo " limit: $$limit bytes"; \ - echo " actual: $$actual bytes"; \ - echo " excess: $$((actual - limit)) bytes"; \ + echo "$@ exceeds file size limit:" >&2 ; \ + echo " limit: $$limit bytes" >&2 ; \ + echo " actual: $$actual bytes" >&2 ; \ + echo " excess: $$((actual - limit)) bytes" >&2; \ exit 1; \ fi else @@ -405,6 +409,7 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin +ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET)) ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin # enable combined SPL/u-boot/dtb rules for tegra @@ -446,9 +451,18 @@ $(obj)u-boot.ldr.hex: $(obj)u-boot.ldr $(obj)u-boot.ldr.srec: $(obj)u-boot.ldr $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary +# +# U-Boot entry point, needed for booting of full-blown U-Boot +# from the SPL U-Boot version. +# +ifndef CONFIG_SYS_UBOOT_START +CONFIG_SYS_UBOOT_START := 0 +endif + $(obj)u-boot.img: $(obj)u-boot.bin $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \ - -O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \ + -O u-boot -a $(CONFIG_SYS_TEXT_BASE) \ + -e $(CONFIG_SYS_UBOOT_START) \ -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ -d $< $@ @@ -472,14 +486,15 @@ $(obj)u-boot.sha1: $(obj)u-boot.bin $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ -$(obj)u-boot.ubl: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin +$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin - cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $(obj)u-boot-ubl.bin - $(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \ - -e $(CONFIG_SYS_TEXT_BASE) -d $(obj)u-boot-ubl.bin $(obj)u-boot.ubl - rm $(obj)u-boot-ubl.bin + cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@ rm $(obj)spl/u-boot-spl-pad.bin +$(obj)u-boot.ubl: $(obj)u-boot-with-spl.bin + $(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \ + -e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl + $(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img $(obj)tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(CONFIG_AIS_CONFIG_FILE),"/dev/null") \ -T aisimage \ @@ -530,6 +545,9 @@ $(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtb rm $(obj)spl/u-boot-spl-pad.bin endif +$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img + cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@ + ifeq ($(CONFIG_SANDBOX),y) GEN_UBOOT = \ cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \ @@ -639,6 +657,16 @@ checkthumb: echo '*** Your board is configured for THUMB mode.'; \ false; \ fi + +# GCC 3.x is reported to have problems generating the type of relocation +# that U-Boot wants. +# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html +checkgcc4: + @if test $(call cc-version) -lt 0400; then \ + echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \ + false; \ + fi + # # Auto-generate the autoconf.mk file (which is included by all makefiles) # @@ -812,7 +840,7 @@ clean: @rm -f $(obj)include/generated/asm-offsets.h @rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) - @$(MAKE) -C doc/DocBook/ cleandocs + @$(MAKE) -s -C doc/DocBook/ cleandocs @find $(OBJTREE) -type f \ \( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \ -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \ |