diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 191 |
1 files changed, 166 insertions, 25 deletions
@@ -22,7 +22,7 @@ # VERSION = 2009 -PATCHLEVEL = 01 +PATCHLEVEL = 03 SUBLEVEL = EXTRAVERSION = -rc1 ifneq "$(SUBLEVEL)" "" @@ -197,7 +197,7 @@ include $(TOPDIR)/config.mk OBJS = cpu/$(CPU)/start.o ifeq ($(CPU),i386) OBJS += cpu/$(CPU)/start16.o -OBJS += cpu/$(CPU)/reset.o +OBJS += cpu/$(CPU)/resetvec.o endif ifeq ($(CPU),ppc4xx) OBJS += cpu/$(CPU)/resetvec.o @@ -228,6 +228,7 @@ LIBS += drivers/bios_emulator/libatibiosemu.a LIBS += drivers/block/libblock.a LIBS += drivers/dma/libdma.a LIBS += drivers/fpga/libfpga.a +LIBS += drivers/gpio/libgpio.a LIBS += drivers/hwmon/libhwmon.a LIBS += drivers/i2c/libi2c.a LIBS += drivers/input/libinput.a @@ -316,7 +317,7 @@ $(obj)u-boot.bin: $(obj)u-boot $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ $(obj)u-boot.ldr: $(obj)u-boot - $(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS) + $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) $(obj)u-boot.ldr.hex: $(obj)u-boot.ldr $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary @@ -347,7 +348,7 @@ $(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(OBJS): depend $(obj)include/autoconf.mk $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) -$(LIBS): depend $(obj)include/autoconf.mk +$(LIBS): depend $(obj)include/autoconf.mk $(SUBDIRS) $(MAKE) -C $(dir $(subst $(obj),,$@)) $(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk @@ -407,6 +408,7 @@ TAG_SUBDIRS += disk TAG_SUBDIRS += common TAG_SUBDIRS += drivers/bios_emulator TAG_SUBDIRS += drivers/block +TAG_SUBDIRS += drivers/gpio TAG_SUBDIRS += drivers/hwmon TAG_SUBDIRS += drivers/i2c TAG_SUBDIRS += drivers/input @@ -1323,6 +1325,9 @@ fx12mm_config: unconfig G2000_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 +gdppc440etx_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys + hcu4_config: unconfig @mkdir -p $(obj)board/netstal/common @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal @@ -2184,6 +2189,9 @@ TASREG_config : unconfig ## MPC83xx Systems ######################################################################### +kmeter1_config: unconfig + @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile + MPC8313ERDB_33_config \ MPC8313ERDB_66_config \ MPC8313ERDB_NAND_33_config \ @@ -2323,6 +2331,21 @@ MVBLM7_config: unconfig sbc8349_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 +SIMPC8313_LP_config \ +SIMPC8313_SP_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/sheldon/simpc8313 + @if [ "$(findstring _LP_,$@)" ] ; then \ + $(XECHO) -n "...Large Page NAND..." ; \ + echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \ + fi ; \ + if [ "$(findstring _SP_,$@)" ] ; then \ + $(XECHO) -n "...Small Page NAND..." ; \ + echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \ + fi ; + @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + TQM834x_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc @@ -2396,8 +2419,14 @@ MPC8555CDS_config: unconfig MPC8568MDS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale +MPC8572DS_36BIT_config \ MPC8572DS_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8572ds freescale + @mkdir -p $(obj)include + @if [ "$(findstring _36BIT_,$@)" ] ; then \ + echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ + $(XECHO) "... enabling 36-bit physical addressing." ; \ + fi + @$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale PM854_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854 @@ -2450,16 +2479,26 @@ stxssa_4M_config: unconfig TQM8540_config \ TQM8541_config \ TQM8548_config \ +TQM8548_AG_config \ +TQM8548_BE_config \ TQM8555_config \ TQM8560_config: unconfig @mkdir -p $(obj)include - @CTYPE=$(subst TQM,,$(@:_config=)); \ - $(XECHO) "... TQM"$${CTYPE}; \ + @BTYPE=$(@:_config=); \ + CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \ + $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \ echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ - echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \ + echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \ echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ - echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; + echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h; @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc + @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk; + +XPEDITE5200_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes + +XPEDITE5370_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes ######################################################################### ## MPC86xx Systems @@ -2594,6 +2633,7 @@ at91sam9260ek_nandflash_config \ at91sam9260ek_dataflash_cs0_config \ at91sam9260ek_dataflash_cs1_config \ at91sam9260ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2606,10 +2646,28 @@ at91sam9260ek_config : unconfig fi; @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 +at91sam9xeek_nandflash_config \ +at91sam9xeek_dataflash_cs0_config \ +at91sam9xeek_dataflash_cs1_config \ +at91sam9xeek_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _nandflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + else \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ + fi; + @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9 + at91sam9261ek_nandflash_config \ at91sam9261ek_dataflash_cs0_config \ at91sam9261ek_dataflash_cs3_config \ at91sam9261ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2626,6 +2684,7 @@ at91sam9263ek_nandflash_config \ at91sam9263ek_dataflash_config \ at91sam9263ek_dataflash_cs0_config \ at91sam9263ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2639,6 +2698,7 @@ at91sam9rlek_nandflash_config \ at91sam9rlek_dataflash_config \ at91sam9rlek_dataflash_cs0_config \ at91sam9rlek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2660,7 +2720,7 @@ ap720t_config \ ap920t_config \ ap926ejs_config \ ap946es_config: unconfig - @board/integratorap/split_by_variant.sh $@ + @board/armltd/integratorap/split_by_variant.sh $@ integratorcp_config \ cp_config \ @@ -2672,7 +2732,7 @@ cp966_config \ cp922_config \ cp922_XA10_config \ cp1026_config: unconfig - @board/integratorcp/split_by_variant.sh $@ + @board/armltd/integratorcp/split_by_variant.sh $@ davinci_dvevm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci @@ -2699,6 +2759,18 @@ mx1fs2_config : unconfig netstar_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm925t netstar +nmdk8815_config \ +nmdk8815_onenand_config: unconfig + @mkdir -p $(obj)include + @ > $(obj)include/config.h + @if [ "$(findstring _onenand, $@)" ] ; then \ + echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ + $(XECHO) "... configured for OneNand Flash"; \ + else \ + $(XECHO) "... configured for Nand Flash"; \ + fi + @$(MKCONFIG) -a nmdk8815 arm arm926ejs nmdk8815 st nomadik + omap1510inn_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn @@ -2750,13 +2822,22 @@ scb9328_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx smdk2400_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 + @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0 smdk2410_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 + @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0 -SX1_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm925t sx1 +SX1_stdout_serial_config \ +SX1_config: unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ + echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ + $(XECHO) "... configured for stdout serial"; \ + else \ + echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ + $(XECHO) "... configured for stdout usbtty"; \ + fi; + @$(MKCONFIG) SX1 arm arm925t sx1 # TRAB default configuration: 8 MB Flash, 32 MB RAM xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) @@ -2802,7 +2883,7 @@ cm41xx_config : unconfig versatile_config \ versatileab_config \ versatilepb_config : unconfig - @board/versatile/split_by_variant.sh $@ + @board/armltd/versatile/split_by_variant.sh $@ voiceblue_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue @@ -2840,6 +2921,25 @@ SMN42_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 ######################################################################### +## ARM CORTEX Systems +######################################################################### + +omap3_beagle_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3 + +omap3_overo_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo omap3 omap3 + +omap3_evm_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm omap3 omap3 + +omap3_pandora_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora omap3 omap3 + +omap3_zoom1_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3 + +######################################################################### ## XScale Systems ######################################################################### @@ -2938,6 +3038,10 @@ mx31ads_config : unconfig omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx +qong_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31 + + ######################################################################### ## ARM1176 Systems ######################################################################### @@ -2961,14 +3065,17 @@ smdk6400_config : unconfig ######################################################################### ## AMD SC520 CDP ######################################################################### +eNET_config : unconfig + @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520 + sc520_cdp_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp + @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520 sc520_spunk_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk + @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 sc520_spunk_rel_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk + @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 #======================================================================== # MIPS @@ -3001,6 +3108,41 @@ incaip_config: unconfig tb0229_config: unconfig @$(MKCONFIG) $(@:_config=) mips mips tb0229 +vct_premium_config \ +vct_premium_small_config \ +vct_premium_onenand_config \ +vct_premium_onenand_small_config \ +vct_platinum_config \ +vct_platinum_small_config \ +vct_platinum_onenand_config \ +vct_platinum_onenand_small_config \ +vct_platinumavc_config \ +vct_platinumavc_small_config \ +vct_platinumavc_onenand_config \ +vct_platinumavc_onenand_small_config: unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _premium,$@)" ] ; then \ + echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \ + $(XECHO) "... on Premium board variant" ; \ + fi + @if [ "$(findstring _platinum_,$@)" ] ; then \ + echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \ + $(XECHO) "... on Platinum board variant" ; \ + fi + @if [ "$(findstring _platinumavc,$@)" ] ; then \ + echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \ + $(XECHO) "... on PlatinumAVC board variant" ; \ + fi + @if [ "$(findstring _onenand,$@)" ] ; then \ + echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \ + $(XECHO) "... on OneNAND board variant" ; \ + fi + @if [ "$(findstring _small,$@)" ] ; then \ + echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \ + $(XECHO) "... stripped down image variant" ; \ + fi + @$(MKCONFIG) -a vct mips mips vct micronas + ######################################################################### ## MIPS32 AU1X00 ######################################################################### @@ -3141,10 +3283,9 @@ PCI5441_config : unconfig ## Microblaze #======================================================================== -ml401_config: unconfig +microblaze-generic_config: unconfig @mkdir -p $(obj)include - @echo "#define CONFIG_ML401 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx + @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx suzaku_config: unconfig @mkdir -p $(obj)include @@ -3201,8 +3342,8 @@ mimc200_config : unconfig ## sh2 (Renesas SuperH) ######################################################################### rsk7203_config: unconfig - @ >include/config.h - @echo "#define CONFIG_RSK7203 1" >> include/config.h + @mkdir -p $(obj)include + @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas ######################################################################### @@ -3316,7 +3457,7 @@ clean: @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ - $(obj)board/{integratorap,integratorcp}/u-boot.lds \ + $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ $(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \ $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] @rm -f $(obj)include/bmp_logo.h |