diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 77 |
1 files changed, 39 insertions, 38 deletions
@@ -1,19 +1,20 @@ ====================================================================== Changes since U-Boot 1.1.4: ====================================================================== -* Fix dbau1x00 Board - - Fix dbau1x00 boards broken by dbau1550 patch - PLL:s were not set for boards other than 1550. - Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST. - Default boot is now bootp for cards other than 1550. - Patch by Thomas Lange Aug 10 2005 -* Fixes common/cmd_flash.c: +* Some code cleanup - - fix some compiler/parser error, if using m68k tool chain - - optical fix for protect on/off all messages, if using more - then one bank - Patch by Jens Scharsig, 28 July 2005 +* Fix dbau1x00 boards broken by dbau1550 patch + PLL:s were not set for boards other than 1550. + Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST. + Default boot is now bootp for cards other than 1550. + Patch by Thomas Lange, 10 Aug 2005 + +* Fixes common/cmd_flash.c: + - fix some compiler/parser error, if using m68k tool chain + - optical fix for protect on/off all messages, if using more + then one bank + Patch by Jens Scharsig, 28 Jul 2005 * Fix Quad UART mapping on MCC200 board due to new HW revision @@ -57,18 +58,18 @@ Changes since U-Boot 1.1.4: * Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440) 405 SDRAM: - The SDRAM parameters can now be defined in the board - config file and the 405 SDRAM controller values will - be calculated upon bootup (see PPChameleonEVB). - When those settings are not defined in the board - config file, the register setup will be as it is now, - so this implementation should not break any current - design using this code. + config file and the 405 SDRAM controller values will + be calculated upon bootup (see PPChameleonEVB). + When those settings are not defined in the board + config file, the register setup will be as it is now, + so this implementation should not break any current + design using this code. - Thanks to Andrea Marson from DAVE for this patch. + Thanks to Andrea Marson from DAVE for this patch. 440 DDR: - Added function sdram_tr1_set to auto calculate the - TR1 value for the DDR. - - Added ECC support (see p3p440). + TR1 value for the DDR. + - Added ECC support (see p3p440). Patch by Stefan Roese, 17 Mar 2006 @@ -442,7 +443,7 @@ Changes since U-Boot 1.1.4: are removed from the default U-Boot build. Enable DEBUG for lib_arm/board.c to enable debug messages. New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options. - Patch by Stefan Roese, 24 Jan 2006 + Patch by Stefan Roese, 24 Jan 2006 * Fix various compiler warnings on ppc4xx builds (ELDK 4.0) Patch by Stefan Roese, 18 Jan 2006 @@ -588,11 +589,11 @@ Changes for U-Boot 1.1.4: * Add support for multiple PHYs. Tested on the following boards: - cmcpu2 (at91rm9200/ether.c) + cmcpu2 (at91rm9200/ether.c) PPChameleon (ppc4xx/4xx_enet.c) - yukon (mpc8220/fec.c) - uc100 (mpc8xx/fec.c) - tqm834x (mpc834x/tsec.c) with EEPRO100 + yukon (mpc8220/fec.c) + uc100 (mpc8xx/fec.c) + tqm834x (mpc834x/tsec.c) with EEPRO100 lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c) Main changes include: common/miiphyutil.c @@ -1132,18 +1133,18 @@ Changes for U-Boot 1.1.3: The first one is to define a single, static partition: #undef CONFIG_JFFS2_CMDLINE - #define CONFIG_JFFS2_DEV "nor0" - #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */ - #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */ - #define CONFIG_JFFS2_PART_OFFSET 0x00000000 + #define CONFIG_JFFS2_DEV "nor0" + #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */ + #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */ + #define CONFIG_JFFS2_PART_OFFSET 0x00000000 The second method uses the mtdparts command line option and dynamic partitioning: /* mtdparts command line support */ #define CONFIG_JFFS2_CMDLINE - #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2" - #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)" + #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2" + #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)" Command line of course produces bigger images, and may be inappropriate for some targets, so by default it's off. @@ -3456,7 +3457,7 @@ Changes for U-Boot 1.0.1: Bring ARM memory layout in sync with the documentation: stack and malloc-heap are now located _below_ the U-Boot code -* Accelerate booting on TRAB board: read and check autoupdate image +* Accelerate booting on TRAB board: read and check autoupdate image headers first instead of always reading the whole images. * Fix type in MPC5XXX code (pointed out by Victor Wren) @@ -3576,7 +3577,7 @@ Changes for U-Boot 1.0.0: * Make 5200 reset command _really_ reset the board, without running any other code after it -* Fix errors with flash erase when range spans across banks +* Fix errors with flash erase when range spans across banks that are mapped in reverse order * Fix flash mapping and display on P3G4 board @@ -3820,7 +3821,7 @@ Changes for U-Boot 0.4.8: or 1 x AM29LV652 (two LV065 in one chip = 16 MB); Run IPB at 133 Mhz; adjust the MII clock frequency accordingly -* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz) +* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz) to allow for more accurate baudrate settings (error now 0.7% at 115 kbps, instead of 3.5% before) @@ -4307,7 +4308,7 @@ Changes for U-Boot 0.4.0: Update for MPC8266ADS board * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length - instead CFG_MONITOR_LEN is now only used to determine _at_compile_ + instead CFG_MONITOR_LEN is now only used to determine _at_compile_ _time_ (!) if the environment is embedded within the U-Boot image, or in a separate flash sector. @@ -4357,7 +4358,7 @@ Changes for U-Boot 0.4.0: * Patch by Thomas Schäfer, 28 Apr 2003: Fix SPD handling for 256 ECC DIMM on Walnut -* Add support for arbitrary bitmaps for TRAB's VFD command; +* Add support for arbitrary bitmaps for TRAB's VFD command; allow to pass boot bitmap addresses in environment variables; allow for zero boot delay @@ -4700,7 +4701,7 @@ Changes for U-Boot 0.3.0: * Add VFD type detection to trab board -* extend drivers/cs8900.c driver to synchronize ethaddr environment +* extend drivers/cs8900.c driver to synchronize ethaddr environment variable with value in the EEPROM * Patch by Stefan Roese, 10 Feb 2003: @@ -4860,7 +4861,7 @@ Changes for U-Boot 0.2.0: * Patch by Pierre Aubert, 05 Nov 2002 Add support for slave serial Spartan 2 FPGAs -* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet +* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet drivers * Add support for log buffer which can be passed to Linux kernel's |