diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 595 |
1 files changed, 595 insertions, 0 deletions
@@ -1,3 +1,387 @@ +commit fa1df308926a6f70e3504c57514ef27ac31fd13a +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Wed Jul 11 20:11:07 2007 +0200 + + CM1.QP1: Support for the Schindler CM1.QP1 board. + + Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 96e1d75be8193ca79e4215a368bf9d7f2362450f +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Wed Jul 11 18:39:11 2007 +0200 + + [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed + - now the Flash ST M29W040B is supported (not tested) + - fix the "led" command + - fix compile error, if BUILD_DIR is used + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Jul 10 00:01:28 2007 +0200 + + Coding style cleanup; update CHANGELOG. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jul 6 02:50:19 2007 +0200 + + Code cleanup and default config update for STC GP3 SSA board. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit b44896215a09c60fa40cae906f7ed207bbc2c492 +Author: Sergei Poselenov <sposelenov@emcraft.com> +Date: Thu Jul 5 08:17:37 2007 +0200 + + Merged POST framework with the current TOT. + + Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> + +commit f780b83316d9af1f61d71cc88b1917b387b9b995 +Author: Niklaus Giger <niklausgiger@gmx.ch> +Date: Wed Jun 27 18:11:38 2007 +0200 + + resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX + + Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> + +commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4 +Author: Stefan Roese <sr@denx.de> +Date: Wed Jul 4 10:06:30 2007 +0200 + + ppc4xx: Update lwmon5 board + + - Add optional ECC generation routine to preserve existing + RAM values. This is needed for the Linux log-buffer support + - Add optional DDR2 setup with CL=4 + - GPIO50 not used anymore + - Lime register setup added + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 1f2a05898658900dc5717761e27abf2052e67e13 +Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in> +Date: Sat Jun 30 18:50:48 2007 +0200 + + Fix S-ATA support. + + Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in> + +commit a5d71e290f3673269be8eefb4ec44f53412f9461 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Mon Jun 25 19:11:37 2007 +0200 + + [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b +Author: Niklaus Giger <niklaus.giger@nestal.com> +Date: Mon Jun 25 17:03:13 2007 +0200 + + ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt + + This patch prints the DDR status registers upon machine check + interrupt on the 440EPx/GRx. This can be useful especially when + ECC support is enabled. + + I added some small changes to the original patch from Niklaus to + make it compile clean. + + Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 807018fb7faceb429ce0cb47baa2073746b33a4e +Author: Niklaus Giger <niklaus.giger@nestal.com> +Date: Mon Jun 25 16:50:55 2007 +0200 + + ppc4xx: Fix O=buildir builds + + This patch fixes the problem to assemble cpu/ppc4xx/start.S + experienced last week where building failed having specified + O=../build.sequoia. + + Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> + +commit 466fff1a7bb5fe764a06450626f6098219f446b8 +Author: Stefan Roese <sr@denx.de> +Date: Mon Jun 25 15:57:39 2007 +0200 + + ppc4xx: Add pci_pre_init() for 405 boards + + This patch removes the CFG_PCI_PRE_INIT option completely, since + it's not needed anymore with the patch from Matthias Fuchs with + the "weak" pci_pre_init() implementation. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6f35c53166213c24a5a0e2390ed861136ff73870 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Sun Jun 24 17:41:21 2007 +0200 + + ppc4xx: Maintenance patch for esd's CPCI405 derivats + + -add pci_pre_init() for pci interrupt fixup code + -disable phy sleep mode via reset_phy() function + -use correct io accessors + -cleanup + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Sun Jun 24 17:23:41 2007 +0200 + + ppc4xx: Add pci_pre_init() for 405 boards + + This patch adds support for calling a plattform dependant + pci_pre_init() function for 405 boards. This can be used to + move the current pci_405gp_fixup_irq() function into the + board code. + + This patch also makes the CFG_PCI_PRE_INIT define obsolete. + A default function with 'weak' attribute is used when + a board specific pci_pre_init() is not implemented. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jun 22 23:59:00 2007 +0200 + + Coding stylke cleanup; rebuild CHANGELOG + +commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9 +Author: Igor Lisitsin <igor@emcraft.com> +Date: Wed Apr 18 14:55:19 2007 +0400 + + Adapt log buffer code to support Linux 2.6 + + A new environment variable, "logversion", selects the log buffer + behaviour. If it is not set or set to a value other than 2, then the + old, Linux 2.4.4, behaviour is selected. + + Signed-off-by: Igor Lisitsin <igor@emcraft.com> + -- + +commit a11e06965ec91270c51853407ff1261d3c740386 +Author: Igor Lisitsin <igor@emcraft.com> +Date: Wed Mar 28 19:06:19 2007 +0400 + + Extend POST support for PPC440 + + Added memory, CPU, UART, I2C and SPR POST tests for PPC440. + + Signed-off-by: Igor Lisitsin <igor@emcraft.com> + -- + +commit 566a494f592ae3b3c0785d90d4e1ba45574880c4 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Fri Jun 22 19:11:54 2007 +0200 + + [PCS440EP] upgrade the PCS440EP board: + - Show on the Status LEDs, some States of the board. + - Get the MAC addresses from the EEProm + - use PREBOOT + - use the CF on the board. + - check the U-Boot image in the Flash with a SHA1 + checksum. + - use dynamic TLB entries generation for the SDRAM + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 3a1f5c81b0b9557817a789bece839905581c2205 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 22 16:58:40 2007 +0200 + + ppc4xx: Fix problem with extended program_tlb() funtion + + The recently extended program_tlb() function had a problem when + multiple TLB's had to be setup (for example with 512MB of SDRAM). The + virtual address was not incremented. This patch fixes this issue + and is tested on Katmai with 512MB SDRAM. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Fri Jun 22 14:58:04 2007 +0200 + + [ppc] Fix build breakage for all non-4xx PowerPC variants. + + - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros + - minor 4xx cleanup + +commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jun 20 18:14:24 2007 +0200 + + Coding style cleanup. Refresh CHANGELOG. + +commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024 +Author: Stefan Roese <sr@denx.de> +Date: Tue Jun 19 17:22:44 2007 +0200 + + ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board + + This patch adds a board command to configure the I2C bootstrap EEPROM + values. Right now 533 and 667MHz are supported for booting either via NOR + or NAND FLASH. Here the usage: + + => bootstrap 533 nor ;to configure the board for 533MHz NOR booting + => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit df8a24cdd30151505cf57bbee5289e91bf53bd1b +Author: Stefan Roese <sr@denx.de> +Date: Tue Jun 19 16:42:31 2007 +0200 + + [ppc4xx] Fix problem with NAND booting on AMCC Acadia + + The latest changes showed a problem with the location of the NAND-SPL + image in the OCM and the init-data area (incl. cache). This patch + fixes this problem. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 86ba99e34194394052d24c04dc40d1263d29a26f +Author: Stefan Roese <sr@denx.de> +Date: Tue Jun 19 16:40:58 2007 +0200 + + [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e73846b7cf1e29ae635bf9bb5570269663df2ee5 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 15 11:33:41 2007 +0200 + + [ppc4xx] Change lwmon5 port to work with recent 440 exception rework + + Now CONFIG_440 has to be defined in all PPC440 board config files. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit efa35cf12d914d4caba942acd5a6c45f217de302 +Author: Grzegorz Bernacki <gjb@semihalf.com> +Date: Fri Jun 15 11:19:28 2007 +0200 + + ppc4xx: Clean up 440 exceptions handling + + - Introduced dedicated switches for building 440 and 405 images required + for 440-specific machine instructions like 'rfmci' etc. + + - Exception vectors moved to the proper location (_start moved away from + the critical exception handler space, which it occupied) + + - CriticalInput now serviced (with default handler) + + - MachineCheck properly serviced (added a dedicated handler and return + subroutine) + + - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, + unhandled and those not relevant for 4xx were eliminated) + + - Eliminated Linux leftovers, removed dead code + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + Signed-off-by: Rafal Jaworowski <raj@semihalf.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 15 08:18:01 2007 +0200 + + [ppc4xx] Add initial lwmon5 board support + + This patch adds initial support for the Liebherr lwmon5 board euqipped + with an AMCC 440EPx PowerPC. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 85f737376d5ff3d5f0d45a8b657686326d175307 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 15 07:39:43 2007 +0200 + + [ppc4xx] Extend 44x GPIO setup with default output state + + The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup + is extended with the default GPIO output state (level). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit dbca208518e5e7f01a6420588d1cd6e60db74c2b +Author: Stefan Roese <sr@denx.de> +Date: Thu Jun 14 11:14:32 2007 +0200 + + [ppc4xx] Extend program_tlb() with virtual & physical addresses + + Now program_tlb() allows to program a TLB (or multiple) with + different virtual and physical addresses. With this change, now one + physical region (e.g. SDRAM) can be mapped 2 times, once with caches + diabled and once with caches enabled. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88 +Author: Detlev Zundel <dzu@denx.de> +Date: Wed May 23 19:02:41 2007 +0200 + + Change 'repeatable' attribute of some commands to sensible values. + + Most prominently this changes 'erase' to be non-repeatable. + + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit 5afb202093f6a001797db92cf695b93a70ea9ab4 +Author: Detlev Zundel <dzu@denx.de> +Date: Wed May 23 18:47:48 2007 +0200 + + Fix 'run' not to continue after interrupted command + + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit 8f8416fada9faf94b9a92f21fe6000643cb521d5 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Fri Jun 8 14:52:22 2007 +0200 + + TQM5200: Add Flat Device Tree support, update default env. accordingly. + + Signed-off-by: Jan Wrobel <wrr@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 9045f33c023f698660a2e45d1b2194c0711abebc +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jun 8 10:24:58 2007 +0200 + + Fix config problems on SC3 board; make ide_reset_timeout work. + +commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b +Author: Benoît Monin <bmonin@adeneo.eu> +Date: Fri Jun 8 09:55:24 2007 +0200 + + [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE + + Set the correct value in GPIOx_TCR when configuring the gpio + with CFG_440_GPIO_TABLE. + + Signed-off-by: Benoit Monin <bmonin@adeneo.eu> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jun 6 16:26:56 2007 +0200 + + Coding Style cleanup; generate new CHANGELOG file. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit c440bfe6d6d92d66478a7e84402b31f48413617b Author: Stefan Roese <sr@denx.de> Date: Wed Jun 6 11:42:13 2007 +0200 @@ -328,6 +712,14 @@ Date: Thu May 24 08:22:09 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 822d55365bb557e084d0e33625a6dedcc866110b +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed May 23 14:09:46 2007 -0500 + + Add LIST_86xx MAKEALL target for PowerPC builds. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + commit 9f0077abd69f7a7c756a915b961037302be3e6f2 Author: Stefan Roese <sr@denx.de> Date: Tue May 22 12:48:09 2007 +0200 @@ -376,6 +768,17 @@ Date: Fri May 18 14:33:11 2007 +0100 Makefile permissions +commit 255a3577c848706441daee0174543efe205a77f8 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed May 16 16:52:19 2007 -0500 + + Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx + + For all practical u-boot purposes, TSECs don't differ throughout the + mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + commit 70124c2602ae2d4c5d3dba05b482d91548242de8 Author: Stefano Babic <sbabic@denx.de> Date: Wed May 16 14:49:12 2007 +0200 @@ -417,6 +820,109 @@ Date: Wed May 16 00:13:33 2007 +0200 Coding Style Cleanup, new CHANGELOG +commit 3162eb836903c8b247fdc7470dd39bfa6996f495 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue May 15 23:38:05 2007 +0200 + + Minor coding style cleanup. + +commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e +Author: mushtaq khan <mushtaq_k@procsys.com> +Date: Fri Apr 20 14:23:02 2007 +0530 + + Add driver for S-ATA-controller on Intel processors with South + Bridge, ICH-5, ICH-6 and ICH-7. + + Implementation: + + 1. Code is divided in to two files. All functions, which are + controller specific are kept in "drivers/ata_piix.c" file and + functions, which are not controller specific, are kept in + "common/cmd_sata.c" file. + + 2. Reading and Writing from the S-ATA drive is done using PIO method. + + 3. Driver can be configured for 48-bit addressing by defining macro + CONFIG_LBA48, if this macro is not defined driver uses the 28-bit + addressing. + + 4. S-ATA read function is hooked to the File system, commands like + ext2ls and ext2load file can be used. This has been tested. + + 5. U-Boot command "SATA_init" is added, which initializes the S-ATA + controller and identifies the S-ATA drives connected to it. + + 6. U-Boot command "sata" is added, which is used to read/write, print + partition table and get info about the drives present. This I have + implemented in same way as "ide" command is implemented in U-Boot. + + 7. This driver is for S-ATA in native mode. + + 8. This driver does not support the Native command queuing and + Hot-plugging. + + Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> + +commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0 +Author: mushtaq khan <mushtaq_k@procsys.com> +Date: Mon Apr 30 15:57:22 2007 +0530 + + Fixes bug clearing the bss section for i386 + + Hi, + There is a bug in the code of clearing the bss section for processor + i386.(File: cpu/i386/start.S) + In the code, bss_start addr (starting addr of bss section) is put into + the register %eax, but the code which clears the bss section refers to + the addr pointed by %edi. + + This patch fixes this bug by putting bss_start into %edi register. + + Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> + +commit c3243cf7b490057277d61acffe4ad0946f9eb4a4 +Author: Joe Hamman <joe.hamman@embeddedspecialties.com> +Date: Mon Apr 30 16:47:28 2007 -0500 + + Add support for BCM5464 Quad Phy + + Added support for Broadcom's BCM5464 Quad Phy + + Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> + +commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a +Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> +Date: Wed May 9 08:10:57 2007 +0800 + + Search the exception table with linear algorithm + + Search the exception table with linear algorithm instead of + bisecting algorithm. + Because the exception table might be unsorted. + + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3 +Author: Aubrey.Li <aubrey.adi@gmail.com> +Date: Mon May 14 11:47:35 2007 +0800 + + Fix compilation issues on MACOSX + + Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com> + Signed-off-by: Aubrey Li <aubrey.adi@gmail.com> + +commit 56fd7162985c412317bbf763a225fba23c64fd31 +Author: Stephen Williams <steve@icarus.com> +Date: Tue May 15 07:55:42 2007 -0700 + + Fix for compile of JSE target + + The attached patch fixes the compile of the JSE board in the + denx git as of 14 may 2007. It is an extremely simple patch, + it just adds the missing define of CFG_SYSTEMACE_WIDTH. + + Fix to compile JSE against 20070514 git of u-boot + commit 61936667e86a250ae12fd2dc189d3588f0a59e0b Author: Stefan Roese <sr@denx.de> Date: Fri May 11 12:01:49 2007 +0200 @@ -756,6 +1262,20 @@ Date: Sat May 5 08:29:01 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 2f550ab976405300f5b07bf2890800840d0aa05f +Author: Timur Tabi <timur@freescale.com> +Date: Sat May 5 08:12:30 2007 +0200 + + 5xxx: write MAC address to mac-address and local-mac-address + + Some device trees have a mac-address property, some have local-mac-address, + and some have both. To support all of these device trees, ftp_cpu_setup() + should write the MAC address to mac-address and local-mac-address, if they + exist. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + commit a79886590593ba1d667c840caa4940c61639f18f Author: Thomas Knobloch <knobloch@siemens.com> Date: Sat May 5 07:04:42 2007 +0200 @@ -919,12 +1439,35 @@ Date: Sun Apr 29 14:13:01 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9 +Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> +Date: Sun Apr 29 14:01:54 2007 +0200 + + [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message + + MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up + message. Use PVR to distinguish between the two variants, and print proper CPU + information. + + Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + commit 5c5d3242935cf3543af01142627494434834cf98 Author: Kim Phillips <kim.phillips@freescale.com> Date: Wed Apr 25 12:34:38 2007 -0500 mpc83xx: minor fixups for 8313rdb introduction +commit ada4d40091f6ed4a4f0040e08d20db21967e4a67 +Author: Ladislav Michl <ladis@linux-mips.org> +Date: Wed Apr 25 16:01:26 2007 +0200 + + [PATCH] simplify silent console + + Signed-off-by: Ladislav Michl <ladis@linux-mips.org> + Acked-by: Stefan Roese <sr@denx.de> + commit 144876a380f5756f57412caf74c1d6dc201dd796 Author: Michal Simek <monstr@monstr.eu> Date: Tue Apr 24 23:01:02 2007 +0200 @@ -1221,6 +1764,58 @@ Date: Mon Apr 16 14:31:55 2007 -0500 Signed-off-by: Scott Wood <scottwood@freescale.com> +commit 7fc4c71a143be8666d70803fb25ae60379c95622 +Author: Stefan Roese <sr@denx.de> +Date: Mon Apr 23 15:39:59 2007 +0200 + + Fix file mode + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 38257988abfe74d459ca2ad748b109ca04e4efe1 +Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> +Date: Mon Apr 23 15:30:39 2007 +0200 + + [PATCH] Avoid assigning PCI resources from zero address + + If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE + core complains and IDE drivers fails to work. Also, assigning zero to a BAR + was illegal according to PCI 2.1 (the later revisions seem to have excluded the + sentence about "0" being considered an invalid address) -- so, use a reasonable + starting value of 0x1000 (that's what the most Linux archs are using). + + Alternatively, one might have fixed the calls to pci_set_region() individually + (some code even seems to have taken care of this issue) but that would have + been a lot more work. :-) + + Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit afb903a2eb9436baa9270ccc0c27082d86497d89 +Author: Jeffrey Mann <mannj@embeddedplanet.com> +Date: Mon Apr 23 14:00:11 2007 +0200 + + [patch] setenv(...) can delete environmentalvariables + + update setenv() function so that entering a NULL value for the + variable's value will delete the environmental variable + + Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit 36f104e5caa747d568eff26b369565af57c2ffa6 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Apr 23 13:54:24 2007 +0200 + + [patch] use unsigned char in smc91111 driver for mac + + the v_mac variable in the smc91111 driver is declared as a signed char ... + this causes problems when one of the bytes in the MAC is "signed" like 0xE0 + because when it gets printed out, you get a display like: + 0xFFFFFFE0 and that's no good + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522 Author: Stefan Roese <sr@denx.de> Date: Mon Apr 23 12:00:22 2007 +0200 |