diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 190 |
1 files changed, 190 insertions, 0 deletions
@@ -1,3 +1,193 @@ +commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Mon Nov 27 22:53:53 2006 +0100 + + Update CHANGELOG + +commit f6e495f54cdb8fe340b9c03deab40ad746d52fae +Author: Stefan Roese <sr@denx.de> +Date: Mon Nov 27 17:43:25 2006 +0100 + + [PATCH] 4xx_enet.c: Correct the setting of zmiifer register + + Patch below corrects the setting of the zmiifer register, it was + overwritting the register rather than ORing the settings. + + Signed-off-by: Neil Wilson <NWilson@airspan.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d1a72545296800b7e219f93104ad5836f0003d66 +Author: Stefan Roese <sr@denx.de> +Date: Mon Nov 27 17:34:10 2006 +0100 + + [PATCH] Select NAND embedded environment from board configuration + + The current NAND Bootloader setup forces the environment + variables to be in line with the bootloader. This change + enables the configuration to be made in the board include + file instead so that it can be individually enabled. + + Signed-off-by: Nick Spence <nick.spence@freescale.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 15784862857c3c2214498defcfed84ff137fb81e +Author: Stefan Roese <sr@denx.de> +Date: Mon Nov 27 17:22:19 2006 +0100 + + [PATCH] nand_wait() timeout fixes + + Two fixes for the nand_wait() function in + drivers/nand/nand_base.c: + + 1. Use correct timeouts. The original timeouts in Linux + source are 400ms and 20ms not 40s and 20s + + 2. Return correct error value in case of timeout. 0 is + interpreted as OK. + + Signed-off-by: Rui Sousa <rui.sousa@laposte.net> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit da5553b095bf04f4f109ad7e565dae3aba47b230 +Author: Stefan Roese <sr@denx.de> +Date: Mon Nov 27 17:04:06 2006 +0100 + + [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel + + This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 + arguments to bootm. It removes the getenv("disable_of") test that used + to be used for this purpose. + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + Acked-by: Jon Loeliger <jdl@freescale.com> + +commit a9398e018593782c5fa7d0741955fc1256b34c1e +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Mon Nov 27 15:32:42 2006 +0100 + + Minor code cleanup. Update CHANGELOG. + +commit 78d620ebb5871d252270dedfad60c6568993b780 +Author: Wolfgang Denk <wd@atlas.denx.de> +Date: Thu Nov 23 22:58:58 2006 +0100 + + Updates for TQM5200 modules: + - fix off-by-one error in board/tqm5200/cam5200_flash.c error message + - simplify "udate" definitions + +commit 2053283304eeddf250d109e6791eb6fa4cad14f7 +Author: Stefan Roese <sr@denx.de> +Date: Wed Nov 22 13:20:50 2006 +0100 + + [PATCH] PPC4xx start.S: Fix for processor errata + + Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx + errata 1.12: 440_33 by moving patch up in code. + + Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 4ef6251403f637841000e0fef9e832aa01339822 +Author: Stefan Roese <sr@denx.de> +Date: Mon Nov 20 20:39:52 2006 +0100 + + [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Mon Nov 20 10:28:30 2006 +0100 + + Update CHANGELOG + +commit 260421a21e934a68d31fb6125b0fbd2631a8ca20 +Author: Stefan Roese <sr@denx.de> +Date: Mon Nov 13 13:55:24 2006 +0100 + + [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated] + + * Adds support for AMD command set Top Boot flash geometry reversal + * Adds support for reading JEDEC Manufacturer ID and Device ID + * Adds support for displaying command set, manufacturer id and + device ids (flinfo) + * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined + * Removes outdated change history (refer to git log instead) + + Signed-off-by: Tolunay Orkun <listmember@orkun.us> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit b21b511d4c50408f4853f46f06b601272196223f +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Sun Nov 12 21:13:23 2006 +0100 + + Update CHANGELOG + +commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sat Nov 11 22:48:22 2006 +0100 + + Disable the watchdog in the default config for the V38B board. + +commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sat Nov 11 22:43:00 2006 +0100 + + Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin + group is enabled for USB earlier (in cpu_init_f() instead of + usb_lowlevel_init()). + +commit 91650b3e4de688038d4f71279c44858e3e2c6870 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Mon Nov 6 17:06:36 2006 +0100 + + Sequential accesses to non-existent memory must be synchronized, + at least on G2 cores. + + This fixes get_ram_size() problems on MPC5200 Rev. B boards. + +commit c59200443072353044aa4bf737a5a60f9a9af231 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Thu Nov 2 15:15:01 2006 +0100 + + Release U-Boot 1.1.6 + +commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Wed Nov 1 02:04:38 2006 +0100 + + Finish up support for MarelV38B board + - add watchdog support + - enable GPIO_WKUP_7 pin for input + - code cleanup + +commit ffa150bc90c943ca265170bd1be3f293674dd5c7 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Wed Nov 1 01:45:46 2006 +0100 + + - Fix issues related to the use of ELDK 4 when compiling for MarelV38B: + * remove warnings when compiling ethaddr.c + * adjust linker script (fixes a crash resulting from incorrect + definition of __u_boot_cmd_start) + - Some MarelV38B code cleanup. + +commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Wed Nov 1 01:38:16 2006 +0100 + + - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the + MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's + Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with + MPC5XXX_WU_GPIO_DATA_O for affected boards. + + - Add defintions for some MPC5XXX GPIO pins. + +commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Wed Nov 1 01:34:29 2006 +0100 + + Changed MarelV38B board make target to lowercase. Config file cleanup. + commit 1954be6e9c9421b45d0a9d05b10356acc7563150 Author: Wolfgang Denk <wd@pollux.denx.de> Date: Sun Oct 29 01:03:51 2006 +0200 |