diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 2341 |
1 files changed, 2341 insertions, 0 deletions
@@ -1,3 +1,1340 @@ +commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:55:32 2008 +0800 + + drivers: add the support for Freescale SATA controller + + Add the Freescale on-chip SATA controller driver to u-boot, + The SATA controller is used on the 837x and 8315 targets, + The driver can be used to load kernel, fs and dtb. + + The features list: + - 1.5/3 Gbps link speed + - LBA48, LBA28 support + - DMA and FPDMA support + - Two ports support + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit bede87f4c87c3ccd868cc60ebf792e0560c6d024 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:54:44 2008 +0800 + + ata: add the readme for SATA command line + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit cd54081cd479e542fc399b8a40651ff11a1ad849 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:53:24 2008 +0800 + + ata: enable the sata initialize on boot up + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 69386383c5c2b323c66495b0b0cef6a9714d83bf +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:52:36 2008 +0800 + + ata: add the fis struct for SATA + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:51:44 2008 +0800 + + ata: add the libata support + + add simple libata support in u-boot + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 8e9bb43429e50df55fa41932cbe65841ff579220 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:50:45 2008 +0800 + + ata: make the ata_piix driver using new SATA framework + + original ata_piix driver is using IDE framework, not real + SATA framework. For now, the ata_piix driver is only used + by x86 sc520_cdp board. This patch makes the ata_piix driver + use the new SATA framework, so + + - remove the duplicated command stuff + - remove the CONFIG_CMD_IDE define in the sc520_cdp.h + - add the CONFIG_CMD_SATA define to sc520_cdp.h + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:49:44 2008 +0800 + + ata: add the support for SATA framework + + - add the SATA framework + - add the SATA command line + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:48:18 2008 +0800 + + ata: merge the header of ata_piix driver + + move the sata.h from include/ to drivers/block/ata_piix.h + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 9eef62804d9695425b24c87b46a61a7fa74afee0 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:47:06 2008 +0800 + + ata: merge the ata_piix driver + + move the cmd_sata.c from common/ to drivers/ata_piix.c, + the cmd_sata.c have some part of ata_piix controller drivers. + consolidate the driver to have better framework. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Mar 26 15:38:47 2008 +0100 + + Coding style cleanup. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660 +Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> +Date: Wed Mar 26 13:02:13 2008 +0100 + + Add CFG_RTC_DS1337_NOOSC to turn off OSC output + + The default settings for RTC DS1337 keeps the OSC + output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to + turn it off. + + Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + +commit 438a4c11260b4ea9805039b0b4f92f9df5306b02 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Mar 26 11:48:46 2008 +0100 + + Cleanup coding style, update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 218ca724c08ca8a649f0917cf201cf23d4b33f39 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Mar 26 10:40:12 2008 +0100 + + README: update documentation (availability, links, etc.) + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 +Author: Aras Vaichas <arasv@magtech.com.au> +Date: Tue Mar 25 12:09:07 2008 +1100 + + USB Storage, add meaningful return value + + This patch changes the "usb storage" command to return success if it + finds a USB storage device, otherwise it returns error. + + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit 18e69a35efbb078403db0c0063986470dad7d082 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Fri Mar 14 23:20:18 2008 +0300 + + 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role + + Linux understands "host" (default), "peripheral" and "otg" (broken). + Though, U-Boot doesn't restrict dr_mode variable to these values (think + of renames in future). + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit c7604783b236e368f225efb7b3efb418fe20b404 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Fri Mar 14 23:20:30 2008 +0300 + + tsec: fix link detection for the RTL8211B PHY + + RTL8211B sets link state register after autonegotiation complete, + so with bootdelay=0 RTL8211B will report lack of the link. + + To fix this, we should wait for aneg to complete, even if the + link is currently down. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:47:09 2008 +0300 + + mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups + + device_type = "soc" is being deprecated, newer device trees will use + "fsl,soc" and/or "fsl,immr" for the soc nodes. + + This patch also adds clock-frequency property for soc nodes (the same + value as bus-frequency). + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07 +Author: Joe D'Abbraccio <ljd015@freescale.com> +Date: Mon Mar 24 13:00:59 2008 -0400 + + Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock + + With the original value of 1/2 clock cycle delay, the system ran relatively + stable except when we run benchmarks that are intensive users of memory. + When I run samba connected disk with a HDBENCH test, the system locks-up + or reboots sporadically. + + Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com> + +commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923 +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Mar 24 12:44:13 2008 -0500 + + mpc83xx: Set PCI I/O bus-address base to zero. + + The device trees for these boards describe PCI I/O as starting from + address zero from the device's perspective. + + Placing I/O elsewhere may cause problems with certain PCI boards, and may + cause problems with Linux. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:47:05 2008 +0300 + + mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK + + At least on the "33MHz Pilot" board crystal is actually 33.3MHz. + This patch fixes "system time drifting" problem. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 3a0cfdd576dc9b16d1468d37339182607c697fb7 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:47:02 2008 +0300 + + mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS + + This is needed to update /choosen/linux,stdout-path properly. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:47:00 2008 +0300 + + mpc83xx: MPC8360E-RDK: add dhcp command + + Plus modify environment to use it and remove bootfile env variable, + it is internal and CONFIG_BOOTFILE is used for these purposes. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:57 2008 +0300 + + mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc + + Current DDR setup easily causes memory corruption, this patch fixes it. + + Also fix TIMING_CFG0_MRS_CYC definition. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:53 2008 +0300 + + mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI + + This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen + controller and FHCI (QE USB). + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 7ad959490962e6842648d87d4bd795ea6cdcce67 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:51 2008 +0300 + + mpc83xx: MPC8360E-RDK: add support for NAND + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 9a3e832aeb491861d029991241572ebdf4b5b61b +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:46 2008 +0300 + + mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode + + This is needed for BCM PHYs to work on this board. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:34 2008 +0300 + + uec: add support for Broadcom BCM5481 Gigabit PHY + + This patch adds basic support for Broadcom BCM5481 PHY. + + RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is + Peter Barada <peterb@logicpd.com>. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 6a600c3a1876bc203445df4f0fd6b12648259666 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:28 2008 +0300 + + uec: add support for RGMII_RXID interface mode + + PHY drivers will use it to setup software delay between RXD and RXC + signals. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:24 2008 +0300 + + uec: add support for gbit mii status readings + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 17:40:47 2008 +0300 + + 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards + + This is primarily for the early console support. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 17:40:43 2008 +0300 + + 83xx: initialize serdes for MPC837XRDB boards + + On the MPC8377ERDB: 2 SATA and 2 PCI-E. + On the MPC8378ERDB: 2 PCI-E + On the MPC8379ERDB: 4 SATA + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 453316a2a19642d8afcbca7452e40a6b44a197b1 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 17:40:32 2008 +0300 + + 83xx: serdes setup routines + + This patch adds few routines to configure serdes on 837x targets. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit a796cdf9c377cb4e5d61d1079a296608f8fbd903 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 17:40:27 2008 +0300 + + 83xx: split COBJS onto separate lines + + ..plus get rid of some #ifdefs in the .c files. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 17:40:23 2008 +0300 + + 83xx: nand support for MPC837XRDB boards + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 82e45a204190593e8613145a928f998fb8c909c4 +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Tue Mar 18 21:44:41 2008 -0400 + + Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 0fa7a1b4719e325fce332689fb8754ec166191ff +Author: Michael Barkowski <michael.barkowski@freescale.com> +Date: Thu Mar 20 13:15:39 2008 -0400 + + mpc8323erdb: remove RTC and add EEPROM + + There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM. + + Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> + Acked-by: Kim Phillips <kim.phillips@freescale.com> + +commit 5bbeea86eb6afb872374cd23217cb3c1018443ed +Author: Michael Barkowski <michael.barkowski@freescale.com> +Date: Thu Mar 20 13:15:34 2008 -0400 + + mpc8323erdb: Improve the system performance + + The following changes are based on kernel UCC ethernet performance: + + 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode + 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT + switch to enable this setting. + + The following changes are based on the App Note AN3369 and + verified to improve memory latency using LMbench: + + 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0 + 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting + previously. + 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on + Twr=15ns, and this was already the setting in DDR_MODE) + 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on + Trp=15ns) + 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on + Tras=40ns) + 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on + Trcd=15ns) + 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on + Trfc=75ns) + 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based + on Tfaw=50ns) + 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based + on CL=3 and WL=2). + + Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> + Acked-by: Kim Phillips <kim.phillips@freescale.com> + +commit fc549c871f43933396a5b3e21d897023d4b31b8d +Author: Michael Barkowski <michael.barkowski@freescale.com> +Date: Thu Mar 20 13:15:28 2008 -0400 + + mpc8323erdb: use readable DDR config macros + + Use available shift/mask macros to define DDR configuration. + + Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> + Acked-by: Kim Phillips <kim.phillips@freescale.com> + +commit 89c7784ed90ba50301eec521144f95111e472906 +Author: Timur Tabi <timur@freescale.com> +Date: Fri Feb 8 13:15:55 2008 -0600 + + 83xx: Add Vitesse VSC7385 firmware uploading + + Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload + the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET. + Cleaned up the board header files to make selecting the VSC7385 easier to + control. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc +Author: Timur Tabi <timur@freescale.com> +Date: Fri Feb 8 13:15:54 2008 -0600 + + NET: Add Vitesse VSC7385 firmware uploading + + The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX + and other boards. A small firwmare must be uploaded to its on-board memory + before it can be enabled. This patch adds the code which uploads firmware + (but not the firmware itself). + + Previously, this feature was provided by a U-Boot application that was + made available only on Freescale BSPs. The VSC7385 firmware must still + be obtained separately, but at least there is no longer a need for a separate + application. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Mar 26 00:52:10 2008 +0100 + + Coding Style cleanyp; update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 43ddd9c820fec44816188f53346b464e20b3142d +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Sat Mar 22 14:23:49 2008 -0400 + + Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T + + These defines embedded the u-boot env variables and/or the bd_t structure + in the fdt blob. The conclusion of discussion on the u-boot email list + was that embedding these in the fdt blob is not useful: there are better + ways of passing the data (in fact, the fdt blob itself replaces the + bd_t struct). + + The only board that enables these is the stxxtc and they don't appear + to be used by linux. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + Acked-by: Kim Phillips <kim.phillips@freescale.com> + +commit 22ed2285743359fd1fe73e411dff914b2256e68f +Author: Stefan Roese <sr@denx.de> +Date: Mon Mar 17 10:49:25 2008 +0100 + + rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d +Author: Kyungmin Park <kmpark@infradead.org> +Date: Mon Mar 17 08:54:06 2008 +0900 + + Add Flex-OneNAND booting support + + Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array + using a NOR Flash interface. This on-chip integration enables system designers + to reduce external system logic and use high-density NAND Flash + in applications that would otherwise have to use more NOR components. + + Flex-OneNAND enables users to configure to partition it into SLC and MLC areas + in more flexible way. While MLC area of Flex-OneNAND can be used to store data + that require low reliability and high density, SLC area of Flex-OneNAND + to store data that need high reliability and high performance. Flex-OneNAND + can let users take advantage of storing these two different types of data + into one chip, which is making Flex-OneNAND more cost- and space-effective. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit c512389cc4a10253249271ff6c887c6dab1f0db2 +Author: André Schwarz <andre.schwarz@matrix-vision.de> +Date: Thu Mar 13 13:50:52 2008 +0100 + + MPC5200: support setup without FEC + + Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is + defined. Systems without FEC, i.e. no FEC node in DTB, should be possible. + + Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit aa3511e422946041ef626f80a05ae5e8bfc700e6 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 18:05:46 2008 -0600 + + FSL: Move board/mpc8266ads under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 7f1d846e5c5754449c286587d099d85246062772 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 18:05:47 2008 -0600 + + FSL: Move board/mpc7448hpc2 under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit b7e24d283e34727c2a6cdfdac2e09a426c579b73 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 18:05:45 2008 -0600 + + FSL: Move board/mpc8260ads under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97 +Author: goda.yusuke <goda.yusuke@renesas.com> +Date: Wed Mar 5 17:08:33 2008 +0900 + + net: Add support AX88796L ethernet device + + AX88796L is device of NE2000 compatible. + This patch support AX88796L ethernet device. + + Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> + Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit e0a6140dd381e1eed1ada2291166ef2616d8822b +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Mar 25 22:50:41 2008 +0100 + + ne2000 driver: change #ifdef to Makefile conditional compilation + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit e710185aae90c64d39c2d453e40e58ceefe4f250 +Author: goda.yusuke <goda.yusuke@renesas.com> +Date: Wed Mar 5 17:08:20 2008 +0900 + + net: Divided code of NE2000 ethernet driver + + There are more devices of the NE2000 base. + A present code is difficult for us to support more devices. + To support more NE2000 clone devices, separated the function. + + Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> + Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 395bce4f59a507a60a475f7ee46bed47de9482df +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Feb 24 23:58:13 2008 -0500 + + net/Blackfin: move on-chip MAC driver into drivers/net/ + + The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board + directory, but it is not board specific, so relocate it to the drivers dir + so that other Blackfin ports can utilize it. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Feb 24 23:52:35 2008 -0500 + + smc91111: use SSYNC() rather than asm(ssync) for Blackfin + + Since the "ssync" instruction may have hardware anomalies associated with + it, have the smc91111 driver use the SSYNC macro rather than invoking it + directly. We workaround all the anomalies via this macro. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138 +Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> +Date: Sun Feb 17 22:57:47 2008 +0000 + + 8xx: Update OF support on 8xx + + This patch does some shifting around of OF support on 8xx. + + Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> + +commit 9c666a7db0b2285a270c68810889ce7d5dba304b +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Feb 15 15:16:18 2008 -0600 + + ppc: Allow boards to specify how much memory they can map + + For historical reasons we limited the stack to 256M because some boards + could only map that much via BATS. However newer boards are capable of + mapping more memory (for example 85xx is capble of doing up to 2G). + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb +Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> +Date: Fri Feb 15 01:05:58 2008 +0000 + + 8xx : Add OF support to Adder875 board port - resubmit + + Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> + +commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Feb 14 20:44:42 2008 -0600 + + Add setexpr command + + Add a simple expr style command that will set an env variable as the result + of the command. This allows us to do simple math in shell. The following + operations are supported: &, |, ^, +, -, *, /. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3f105faa64b9826e088711fdfcaa70cb1230397a +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 17:27:48 2008 -0600 + + FSL: Move board/mpc7448hpc2 under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 449c703374a8868453425e15da7e2f76221b72e4 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 17:21:43 2008 -0600 + + FSL: Move board/mpc8266ads under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 5863577989ad689427bb750107e9a75f1c1645d2 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 16:41:41 2008 -0600 + + FSL: Move board/mpc8260ads under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 8a773983957ee6c4aa344469b742f29c7d26afbd +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:08 2008 +0900 + + [MIPS] Move gth2_config from ARM section to MIPS + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Fix dcache_status() + + You can't judge UNCACHED by Config.K0 LSB. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Introduce _machine_restart + + Handles machine specific functions by using weak functions. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit decaba6f5cf386d569ac3997bebb871b966c6b18 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Cleanup CP0 Status initialization + + Add setup_c0_status from Linux. For the moment we disable interrupts, set + CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for + reset-time configuration and will work well across most processors. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Initialize CP0 Cause before setting up CP0 Status register + + Without this change, we'll be suffering from deffered WATCH exception + once Status.EXL is cleared. Make sure Cause.WP is cleared. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 26138623230ca2bad3c78e05a65527ea70c8b688 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init() + + Move things to appropriate place. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:06 2008 +0900 + + [MIPS] Implement flush_cache() + + We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you + don't need to do Hit_Invalidate_I, but flush_cache() needs it since this + function is used not only in U-Boot specfic programs but also at loading + target binaries. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:06 2008 +0900 + + [MIPS] Fix I-/D-cache initialization loops + + Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I + again per a loop for I-cache initialization. But according to 'See MIPS + Run', we're encouraged to use three separate loops rather than combining + them *for both I- and D-cache*. This patch tries to fix this. + + In accordance with fixing above, mips_init_[id]cache are separated from + mips_cache_reset(), and rewrite cache loops are completely rewritten with + useful macros. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 1898840797c7f50799377bd5b285a8a93a82c419 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:06 2008 +0900 + + [MIPS] Replace memory clearance code with f_fill64 + + This routine fills memory with zero by 64 bytes, and is 64-bit capable. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 2f5d414ccb4024dd0992ff6b22561732dbc73590 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:06 2008 +0900 + + [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros + + This patch replaces the current function definitions with NESTED, LEAF + and END macro. They specify some more additional information about the + function; an alignment of symbol, type of symbol, stack frame usage, etc. + These information explicitly tells the assembler and the debugger about + the types of code we want to generate. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 282223a607c611425fa33f5428f8eae6636972bb +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 11:43:17 2008 +0900 + + [MIPS] asm headers' updates + + Make some asm headers adjusted to the latest Linux kernel. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 11:39:29 2008 +0900 + + [MIPS] Request for the 'mips_cache_lock()' removal + + The initial intension of having mips_cache_lock() was to use the cache + as memory for temporary stack use so that a C environment can be set up + as early as possible. + + But now mips_cache_lock() follow lowlevel_init(). We've already have the + real memory initilaized at this point, therefore we could/should use it. + No reason to lock at all. + + Other problems: + + Cache locking is not consistent across MIPS implementaions. Some imple- + mentations don't support locking at all. The style of locking varies - + some support per line locking, others per way, etc. Some parts use bits + in status registers instead of cache ops. Current mips_cache_lock() is + not necessarily general-purpose. + + And this is worthy of special mention; once U-Boot/MIPS locks the lines, + they are never get unlocked, so the code relies on whatever gets loaded + after U-Boot to re-initialize the cache and clear the locks. We're sup- + posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented, + but leave the situation as it is for a long time. + + For these reasons, I proposed the removal of mips_cache_lock() from the + global start-up code. + + This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that + *things have changed*. If he wants the same behavior as before, he needs + to have CFG_INIT_RAM_LOCK_MIPS in his config file. + + If we don't have any regression report through several releases, then + we'll remove codes entirely. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + Acked-by: Andrew Dyer <amdyer@gmail.com> + +commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Mon Mar 24 11:30:54 2008 +0100 + + lwmon5 SYSMON POST: fix backlight control + + If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be + run on the board, then the SYSMON POST controls the display backlight + (doesn't switch backlight ON if POST FAILED, and does switch the + backlight ON if PASSED). + + If not, then the video driver controls the display backlight (just + switch ON the backlight upon initialization). + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8 +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Mon Mar 24 11:29:14 2008 +0100 + + lwmon5 SYSMON POST: fix handling of negative temperatures + + Fix errors in the LWMON5 Sysmon POST for negative temperatures. + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Fri Mar 7 16:04:25 2008 +0900 + + pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option + + In current source code, when the device number of PCI is 0, process PCI + bridge without fail. However, when the device number is 0, it is not PCI + always bridge. There are times when device of PCI allocates. + + When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when + use this patch. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + Acked-by: Stefan Roese <sr@denx.de> + +commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Fri Mar 21 09:18:40 2008 +0100 + + LWMON5: fix dsPIC POST + + Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST. + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> --- + +commit 388b82fddc7c05596f3f615f190da0448227dc82 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Mar 20 23:23:13 2008 +0100 + + [new uImage] Enable new uImage support for the pcs440ep board. + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 95f4ec2b9c910c7261e6f060ea530d58b039692d +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Mar 20 23:23:13 2008 +0100 + + [new uImage] Do not compile new uImage format support by default + + Disable default building of new uImage format support in preparation + for merge with the master. Support for new format can be enabled on + a per-board basis, by defining the following in the board's config file: + + #define CONFIG_FIT 1 + #define CONFIG_OF_LIBFDT 1 + + This can be optionally defined to give more verbose output: + + #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit dafaede8a46c7159310239e036c93e31c6374487 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Mar 20 23:20:31 2008 +0100 + + [new uImage] Disable debuging output in preparation for merge with master + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit fbe7a155027beacebaee9b32e1ada781fe924bca +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Mar 20 19:38:45 2008 +0100 + + [new uImage] Compilation and new uImage handling fixes for imxtract + + Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in + include/config_cmd_default.h. Fix few warnings and handling of new format + images. + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 36cc8cbb3379d5166f882641123521735c469f92 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Mar 20 23:10:19 2008 +0100 + + [new uImage] Fix autoscr command used with new uImage format + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 43142e817f0597be412e7cbe19413f5532eafa5d +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Mar 20 23:10:19 2008 +0100 + + [new uImage] Fix *.its files location in documentation + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Mar 20 22:01:38 2008 +0100 + + lwmon5 POST: remove unreachable code + + plus some coding style cleanup + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit b73a19e1609d0f705cbab8014ca17aefe89e4c76 +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Thu Mar 20 17:56:04 2008 +0300 + + LWMON5: POST RTC fix + + Modify the RTC API to provide one a status for the time reported by + the rtc_get() function: + 0 - a reliable time is guaranteed, + < 0 - a reliable time isn't guaranteed (power fault, clock issues, + and so on). + + The RTC chip drivers are responsible for providing this info if the + corresponding chip supports such functionality. If not - always + report that the time is reliable. + + The POST RTC test was modified to detect the RTC faults utilizing + this new rtc_get() feature. + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5 +Author: Martin Krause <martin.krause@tqs.de> +Date: Wed Mar 19 14:25:14 2008 +0100 + + TQM5200B: update MTD partition layout + + - insert partition for dtb blob to TQM5200B MTD layout + - set env variables dependent on the configured board + (TQM5200 or TQM5200B) + + Signed-off-by: Martin Krause <martin.krause@tqs.de> + +commit f0105727d132f56a21fa3ed8b162309cca6cac44 +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 19 07:09:26 2008 +0100 + + CFI: Small cleanup for FLASH_SHOW_PROGRESS + + With this patch we don't need that many #ifdef's in the code. It moves + the subtraction into the macro and defines a NOP-macro when + CONFIG_FLASH_SHOW_PROGRESS is not defined. + + Signed-off-by: Stefan Roese <sr@denx.de> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 9a042e9ca512beaaa2cb450274313fc477141241 +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Sat Mar 8 13:48:01 2008 -0500 + + Flash programming progress countdown. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Wed Mar 19 10:00:06 2008 +0100 + + [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org> + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1 +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Mon Feb 18 18:09:04 2008 +1100 + + libfdt: Remove no longer used code from fdt_node_offset_by_compatible() + + Since fdt_node_offset_by_compatible() was converted to the new + fdt_next_node() iterator, a chunk of initialization code became + redundant, but was not removed by oversight. This patch cleans it up. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit d0ccb9b140b472039732de102fc14597eedb14df +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Mon Feb 18 18:06:31 2008 +1100 + + libfdt: Trivial cleanup for CHECK_HEADER) + + Currently the CHECK_HEADER() macro is defined local to fdt_ro.c. + However, there are a handful of functions (fdt_move, rw_check_header, + fdt_open_into) from other files which could also use it (currently + they open-code something more-or-less identical). Therefore, this + patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those + places. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit fe30a354cdbb808b5f15366a935b151a4ccee74f +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 20 14:32:36 2008 -0600 + + Fix fdt boardsetup command parsing + + The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 804887e6001e2f00bea11431bf34d6d472512cda +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Feb 15 03:34:36 2008 -0600 + + Add sub-commands to fdt + + fdt header - Display header info + fdt bootcpu <id> - Set boot cpuid + fdt memory <addr> <size> - Add/Update memory node + fdt rsvmem print - Show current mem reserves + fdt rsvmem add <addr> <size> - Add a mem reserve + fdt rsvmem delete <index> - Delete a mem reserves + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07 +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Thu Feb 14 16:50:34 2008 +1100 + + libfdt: Fix NOP handling bug in fdt_add_subnode_namelen() + + fdt_add_subnode_namelen() has a bug if asked to add a subnode to a + node which has NOP tags interspersed with its properties. In this + case fdt_add_subnode_namelen() will put the new subnode before the + first NOP tag, even if there are properties after it, which will + result in an invalid blob. + + This patch fixes the bug, and adds a testcase for it. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9 +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Tue Feb 12 11:58:31 2008 +1100 + + libfdt: Add and use a node iteration helper function. + + This patch adds an fdt_next_node() function which can be used to + iterate through nodes of the tree while keeping track of depth. This + function is used to simplify the iteration code in a lot of other + functions, and is also exported for use by library users. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Fri Jan 11 14:55:05 2008 +1100 + + libfdt: Add fdt_set_name() function + + This patch adds an fdt_set_name() function to libfdt, mirroring + fdt_get_name(). This is a r/w function which alters the name of a + given device tree node. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit 23e20aa6488e6c0622496549861bfdc74108debe +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Tue Mar 18 13:33:30 2008 +0100 + + lwmon5: Fix register test logic to match the specific GDC h/w. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 46bc0a938779aa1d664b847d36b08aa00f22e539 +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Tue Mar 18 13:27:57 2008 +0100 + + Fix backlight in the lwmon5 POST. + + Backlight was switched on even when temperature was too low. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Wed Feb 6 18:48:36 2008 +0100 + + The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5). + + To enable this, alternative, configuration the U-Boot board configuration + file for lwmon5 includes the definitions of alternative addresses for header + (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR). + + The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set, + and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the + lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h). + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 0f009f781b5b88f25769e154ea4d42db13baf0c6 +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 17:11:53 2008 +0100 + + Add support for the lwmon5 board reset via GPIO58. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit f694e32f93565ec1fa8d0226c584d6b89e931ed9 +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 17:09:55 2008 +0100 + + Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 14:11:03 2008 +0100 + + The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184 +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 14:10:42 2008 +0100 + + The patch adds new POST tests for the Lwmon5 board. These are: + + * External Watchdog test; + * dsPIC tests; + * FPGA test; + * GDC test; + * Sysmon tests. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit c2ed33efbfff5767bca236828e021c55fd547b6c +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 14:10:01 2008 +0100 + + Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + +commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Mar 18 17:35:51 2008 +0100 + + HMI1001: fix compile problem. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 1f2a9970109cebf7446e0503b10b71f8673045ee +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Feb 18 05:32:30 2008 -0500 + + Blackfin: BF537-stamp: drop board-specific flash driver for CFI + + The parallel flash on the BF537-STAMP is CFI compliant, so there is no need + for the board specific driver at all. Just use the common CFI driver. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Feb 19 00:36:14 2008 -0500 + + Blackfin: add proper ELF markings to some assembly functions + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Feb 19 00:35:17 2008 -0500 + + Blackfin: new cplbinfo command for viewing cplb tables + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit aadb72503cd1602349a5fe53356d5f55ecc1b900 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Feb 18 05:37:51 2008 -0500 + + Blackfin: update MAINTAINERS list + + Add maintainer information for the Blackfin boards. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Feb 18 05:26:48 2008 -0500 + + Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU + + Stop tying things to the processor that should be tied to other defines and + change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build + system to select the -mcpu option. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 86a20fb920bd198105acf7b1191117f566d637ed +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Feb 16 07:40:36 2008 -0500 + + Blackfin: move bootldr command to common code + + This moves the Blackfin-common bootldr command out of the BF537-STAMP + specific board directory and into the common directory so that all Blackfin + boards may utilize it. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit decbe029b2a9d3333d02c433389b1c821eea96d7 +Author: Heiko Schocher <hs@denx.de> +Date: Fri Mar 14 11:05:20 2008 +0100 + + mgcoge: update configuration + + Fix configuration for mgcoge board + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit c136724cda0219c49f1d4b346f00da29b14fdf14 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Mar 16 01:22:59 2008 +0100 + + drivers/rtc/Makefile: keep list sorted + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f +Author: Tor Krill <tor@excito.com> +Date: Sat Mar 15 15:40:26 2008 +0100 + + Add support for Intersil isl1208 RTC + + Signed-off-by: Tor Krill <tor@excito.com> + +commit 0210cff3d079d97b2156b13685ee8de368e68a1a +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sat Mar 15 17:36:41 2008 +0100 + + cramfs: Fix ifdef + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Mar 16 01:12:58 2008 +0100 + + Conding style cleanup + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 41712b4e8c95dff23354bcd620e1f9477160c190 Author: Stefan Roese <sr@denx.de> Date: Wed Mar 5 12:31:53 2008 +0100 @@ -226,6 +1563,25 @@ Date: Tue Mar 11 13:52:25 2008 +0100 Signed-off-by: Stefan Roese <sr@denx.de> +commit 766529fccc860ecb9e955b4239dff69cd9e4ea09 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Fri Mar 14 16:22:34 2008 +0100 + + Add MD5 support to the new uImage format + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 0ede0c383530a418cf98be9122371a86573cd0db +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Fri Mar 14 16:22:34 2008 +0100 + + Add the MD5 algorithm + + MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then + calculated using the md5() function -- see include/md5.h for details. + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0 Author: Wolfgang Denk <wd@denx.de> Date: Fri Mar 14 16:04:54 2008 +0100 @@ -259,6 +1615,276 @@ Date: Thu Mar 13 14:29:49 2008 +0100 Signed-off-by: Wolfgang Denk <wd@denx.de> +commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 12:14:15 2008 +0100 + + [new uImage] Fix build issue on ARM + + ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3310c549a73a949430bfda90876df7552a1dab0c +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 12:13:13 2008 +0100 + + [new uImage] Add new uImage format documentation and examples + + Create doc/uImage.FIT documentation directory with the following files: + - command_syntax_extensions.txt : extended command syntax description + - howto.txt : short usage howto + - source_file_format.txt : internal new uImage format description + + Add example image source files: + - kernel.its + - kernel_fdt.its + - multi.its + + Update README appropriately. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 1ec73761d2e247078f4520a265d463e8b73391a2 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:35:52 2008 +0100 + + [new uImage] Fix definition of common bootm_headers_t fields + + verify, autostart and lmb fields are used regardless of CONFIG_FIT + setting, move their definitions to common section. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 1d1cb4270edc6a99276834064069717f9782c491 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:35:51 2008 +0100 + + [new uImage] Fix build problems on trab board + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit f773bea8e11f4a11c388dcee956b2444203e6b65 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:35:46 2008 +0100 + + [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used + + Save FIT configuration provied in the first bootm argument and use it + when to get ramdisk/FDT subimages when second and third (ramdisk/FDT) + arguments are not specified. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:01 2008 +0100 + + [new uImage] More verbose kernel image uncompress error message + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:01 2008 +0100 + + [new uImage] Use show_boot_progress() for new uImage format + + This patch allocates a set of show_boot_progress() IDs for new uImage format + and adds show_boot_progress() calls in new uImage format handling code. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:01 2008 +0100 + + [new uImage] Add new uImage fromat support to fpga command + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 09475f7527460e426c0e0628fc5b8f3754fbaa23 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:01 2008 +0100 + + [new uImage] Add new uImage format handling to other bootm related commands + + Updated commands: + + docboot - cmd_doc.c + fdcboot - cmd_fdc.c + diskboot - cmd_ide.c + nboot - cmd_nand.c + scsiboot - cmd_scsi.c + usbboot - cmd_usb.c + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:00 2008 +0100 + + [new uImage] Add new uImage format support to imgextract command + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 424c4abdd175d2c470510df8ce0e32d3f463ec16 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:00 2008 +0100 + + [new uImage] Add new uImage format support to autoscript routine + + autoscript() routine is updated to accept second argument, which + is only used for FIT images and provides a FIT subimage unit name. + + autoscript() routine callers must now pass two arguments. For + non-interactive use (like in cmd_load.c, cmd_net.c), new environment + variable 'autoscript_uname' is introduced and used as a FIT + subimage unit name source. + + autoscript command accepts extended syntax of the addr argument: + addr:<subimg_uname> + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit cd7c596e9f561dbbc17b717277438aee78cde14f +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:00 2008 +0100 + + [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines + + This patch updates architecture specific implementations of + do_bootm_linux() adding new uImage format handling for + operations like get kernel entry point address, get kernel + image data start address. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 3dfe110149311425919e6d6a14b561b4207498f1 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:32:59 2008 +0100 + + [new uImage] Add node offsets for FIT images listed in struct bootm_headers + + This patch adds new node offset fields to struct bootm_headers + and updates bootm_headers processing code to make use of them. + Saved node offsets allow to avoid repeating fit_image_get_node() calls. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit bc8ed486b125452ba3bd8344f052f437329150c5 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:32:53 2008 +0100 + + [new uImage] ppc: Add new uImage format support to FDT handling routines + + Support for new (FIT) format uImages is added to powerpc specific + boot_get_fdt() routine which now recognizes, sanity checks FIT image + and is able to access data sections of the requested component image. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit a44a269a905f924b420020506a4d7d7eedcc0eaf +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:14:57 2008 +0100 + + [new uImage] Re-enable interrupts for non automatic booting + + Re-enable interrupts if we return from do_bootm_<os> and 'autostart' + environment variable is not set to 'yes'. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit d985c8498c4e47095820da97aa722381d39172c5 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:14:38 2008 +0100 + + [new uImage] Remove unnecessary arguments passed to ramdisk routines + + boot_get_ramdisk() and image_get_ramdisk() do not need all + cmdtp, flag, argc and argv arguments. Simplify routines definition. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit c87796483bc7c2900470dc747c367f602577608d +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:12:37 2008 +0100 + + [new uImage] Add new uImage format support for ramdisk handling + + This patch updates boot_get_ramdisk() routine adding format + verification and handling for new (FIT) uImages. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:01:05 2008 +0100 + + [new uImage] Add new uImage format support for kernel booting + + New format uImages are recognized by the bootm command, + validity of specified kernel component image is checked and + its data section located and used for further processing + (uncompress, load, etc.) + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Mar 11 12:35:20 2008 +0100 + + [new uImage] Add new uImage format support for imls and iminfo commands + + imls and iminfo can now recognize nad print out contents of the new (FIT) + format uImages. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 9d25438fe7d70cf35a8a293ea5e392fefc672613 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue Mar 11 12:34:47 2008 +0100 + + [new uImage] Add support for new uImage format to mkimage tool + + Support for the new uImage format (FIT) is added to mkimage tool. + Commandline syntax is appropriately extended: + + mkimage [-D dtc_options] -f fit-image.its fit-image + + mkimage (together with dtc) takes fit-image.its and referenced therein + binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the + final image that can be transferred to the target (e.g., via tftp) and then + booted using the bootm command in U-Boot. + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit eb6175edd6c120d8b89678243e5a2be362ee8e40 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Mon Mar 10 17:53:49 2008 +0100 + + [new uImage] Make node unit names const in struct bootm_headers + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Fri Feb 29 21:24:06 2008 +0100 + + [new uImage] New uImage low-level API + + Add FDT-based functions for handling new format component images, + configurations, node operations, property get/set, etc. + + fit_ - routines handling global new format uImage operations + like get/set top level property, process all nodes, etc. + fit_image_ - routines handling component images subnodes + fit_conf_ - routines handling configurations node + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + commit 30f1806f60978d707b0cff2d7bf89d141fc24290 Author: Wolfgang Denk <wd@denx.de> Date: Sun Mar 9 16:20:02 2008 +0100 @@ -857,6 +2483,238 @@ Date: Sun Feb 24 11:44:29 2008 +0900 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Fri Feb 29 22:22:46 2008 +0100 + + [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt() + + Do not use global fdt blob pointer, calculate blob size from routine + argument blob pointer. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit d1cc52879c8966507dad9fb575481e6d3985e64e +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Tue Feb 12 00:58:31 2008 +1100 + + libfdt: Add and use a node iteration helper function. + + This patch adds an fdt_next_node() function which can be used to + iterate through nodes of the tree while keeping track of depth. This + function is used to simplify the iteration code in a lot of other + functions, and is also exported for use by library users. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit 8cf30809a82902a471866d2f07725ce3b8a22291 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Fri Feb 29 16:00:24 2008 +0100 + + [new uImage] Add libfdt support to mkimage + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Fri Feb 29 16:00:23 2008 +0100 + + [new uImage] Add sha1.o object to mkimage binary build + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit df6f1b895c997978f03afe04502ee76b7ba34ab9 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Fri Feb 29 16:00:06 2008 +0100 + + [new uImage] Fix component handling for legacy multi component images + + Use uint32_t when accessing size table in image_multi_count() and + image_multi_getimg() for multi component images. + + Add missing uimage_to_cpu() endianness conversion. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Fri Feb 29 15:59:59 2008 +0100 + + [new uImage] Share common uImage code between mkimage and U-boot + + This patch adds the following common routines: + + 1) Dedicated mkimage print_header() is replaced with common + image_print_contents() + image_print_contents_noindent() + + 2) Common os/arch/type/comp fields name <--> id translation routines + genimg_get_os_name() + genimg_get_arch_name() + genimg_get_type_name() + genimg_get_comp_name() + genimg_get_os_id() + genimg_get_arch_id() + genimg_get_type_id() + genimg_get_comp_id() + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Fri Feb 29 14:58:34 2008 +0100 + + [new uImage] Update naming convention for bootm/uImage related code + + This patch introduces the following prefix convention for the + image format handling and bootm related code: + + genimg_ - dual format shared code + image_ - legacy uImage format specific code + fit_ - new uImage format specific code + boot_ - booting process related code + + Related routines are renamed and a few pieces of code are moved around and + re-grouped. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:51 2008 -0600 + + [new uImage] Respect autostart setting in linux bootm + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + +commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:50 2008 -0600 + + [new uImage] Provide ability to restrict region used for boot images + + Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way + to restrict what memory range is used for bootm. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + +commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:49 2008 -0600 + + [new uImage] Use lmb for bootm allocations + + Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd() + functions over to using lmb for allocation of the ramdisk, command line + and kernel bd info. + + Convert PPC specific fdt_relocate() to use lmb for allocation of the device + tree. + + Provided a weak function that board code can call to do additional + lmb reserves if needed. + + Also introduce the concept of bootmap_base to specify the offset in + physical memory that the bootmap is located at. This is used for + allocations of the cmdline, kernel bd, and device tree as they should + be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f5614e7926863bf0225ec860d9b319741a9c4004 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:48 2008 -0600 + + [new uImage] Add autostart flag to bootm_headers structure + + The autostart env variable was dropped as part of the initial new uImage + cleanup. Add it back here so the arch specific code can decide if it + wants to really boot or not. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + +commit 4ed6552f715983bfc7d212c1199a1f796f1144ad +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:47 2008 -0600 + + [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images + + Introduce the LMB lib used on PPC in the kernel as a clean way to manage + the memory spaces used by various boot images and structures. This code + will allow us to simplify the code in bootm and its support functions. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Feb 19 22:03:47 2008 -0600 + + [new uImage] ppc: Allow boards to specify effective amount of memory + + For historical reasons we limited the stack to 256M because some boards + could only map that much via BATS. However newer boards are capable of + mapping more memory (for example 85xx is capable of doing up to 2G). + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + +commit 274cea2bddbca10cdad7daa518951b75c44ef6bc +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:46 2008 -0600 + + [new uImage] rework error handling so common functions don't reset + + Changed image_get_ramdisk() to just return NULL on error and have + get_ramdisk() propogate that error to the caller. It's left to the + caller to call do_reset() if it wants to. + + Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc + to a common location. In the future we will change get_fdt() and + fdt_relocate() to return success/failure and not call do_reset() at all. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + +commit d2bc095a639672def11d5d043b5688d0dbd692ec +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:45 2008 -0600 + + [new uImage] ppc: Re-order ramdisk/fdt handling sequence + + Doing the fdt before the ramdisk allows us to grow the fdt w/o concern + however it does mean we have to go in and fixup the initrd info since + we don't know where it will be. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 27953493ef025fb698d68c5dee39b36f01f4d530 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:44 2008 -0600 + + [new uImage] ppc: Determine if we are booting an OF style + + If we are bootin OF style than we can skip setting up some things + that are used for the old boot method. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + +commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:43 2008 -0600 + + [new uImage] Don't pass kdb to ramdisk_high since we may not have one + + We don't actually need the kdb param as we are just using it to get + bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we + boot via OF we might not actually fill out a kdb. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775 Author: Kumar Gala <galak@kernel.crashing.org> Date: Wed Feb 27 16:30:47 2008 -0600 @@ -917,6 +2775,98 @@ Date: Sun Feb 17 22:56:16 2008 +0100 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +commit 4efbe9dbb129f857f27856936112c8c02f016be6 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Feb 27 11:02:26 2008 +0100 + + [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled + + Dual format image code must properly handle all three FDT passing methods: + - raw FDT blob passed + - FDT blob embedded in the legacy uImage + - FDT blob embedded in the new uImage + + This patch enables proper raw FDT handling when no FIT imaeg support + is compiled in. This is a bit tricky as we must dected FIT format even + when FIT uImage handling is not enabled as both FIT uImages and raw FDT + blobs use tha same low level format (libfdt). + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Feb 27 11:02:26 2008 +0100 + + [new uImage] POWERPC: Add image_get_fdt() routine + + FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage + (3) or embedded in the new uImage. For the (2) case embedding image must be + verified before we get FDT from it. This patch factors out legacy image + specific verification routine to the separate helper routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Kumar Gala <galak@kernel.crashing.org> + +commit 1efd43601f90de21ec6c0ebb9880823e822927b1 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Feb 27 11:02:07 2008 +0100 + + [new uImage] Add image_get_kernel() routine + + Legacy image specific verification is factored out to a separate helper + routine to keep get_kernel() generic and simple. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Kumar Gala <galak@kernel.crashing.org> + +commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Feb 27 11:01:04 2008 +0100 + + [new uImage] Move image verify flag to bootm_headers structure + + Do not pass image verification flag directly to related routines. + Simplify argument passing and move it to the bootm_header structure which + contains curently processed image specific data and is already being passed + on the argument list. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Kumar Gala <galak@kernel.crashing.org> + +commit 823afe7cefe00dafefc6696c1cc7aa828c394234 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Feb 27 11:00:47 2008 +0100 + + [Makefile] Sort COBJS in lib_<arch> Makefiles + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Feb 27 11:00:47 2008 +0100 + + [new uImage] Optimize gen_get_image() flow control + + When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing + to do, update its control flow to better reflect that simple case. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Kumar Gala <galak@kernel.crashing.org> + +commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca +Author: Marian Balakowicz <m8@semihalf.com> +Date: Mon Feb 4 08:28:17 2008 +0100 + + [new uImage] POWERPC: Split get_fdt() into get and relocate routines + + PPC specific FDT blob handling code is divided into two separate routines: + + get_fdt() - find and verify a FDT blob (either raw or image embedded) + fdt_relocate() - move FDT blob to within BOOTMAP if needed + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Kumar Gala <galak@kernel.crashing.org> + commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817 Author: Jon Loeliger <jdl@freescale.com> Date: Mon Feb 25 13:13:37 2008 -0600 @@ -982,6 +2932,24 @@ Date: Sun Feb 24 23:03:10 2008 +0000 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +commit d5934ad7756f038a393a9cfab76a4fe306d9d930 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Mon Feb 4 08:28:09 2008 +0100 + + [new uImage] Add dual format uImage support framework + + This patch adds framework for dual format images. Format detection is added + and the bootm controll flow is updated to include cases for new FIT format + uImages. + + When the legacy (image_header based) format is detected appropriate + legacy specific handling is invoked. For the new (FIT based) format uImages + dual boot framework has a minial support, that will only print out a + corresponding debug messages. Implementation of the FIT specific handling will + be added in following patches. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + commit b29661fc1151077776454288051bc9a488351ce8 Author: Wolfgang Denk <wd@denx.de> Date: Sun Feb 24 15:21:36 2008 +0100 @@ -1272,6 +3240,73 @@ Date: Sat Feb 16 02:12:37 2008 -0500 Signed-off-by: Mike Frysinger <vapier@gentoo.org> +commit 5583cbf736474ef754e128a54fb78632f57b48fd +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Feb 21 17:27:49 2008 +0100 + + [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 2242f5369822bc7780db95c47985bb408ea9157b +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Feb 21 17:27:41 2008 +0100 + + [new uImage] Rename and move print_image_hdr() routine + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit f50433d670ec2ee9e96abac67cdc6e5e061a810d +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Feb 21 17:20:20 2008 +0100 + + [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines + + Introducing routines for parsing new uImage format bootm arguments: + [<addr>]#<conf> - configuration specification + [<addr>]:<subimg> - subimage specification + + New format images can contain multiple subimages of the same type. For example + a single new format image file can contain three kernels, two ramdisks and a + couple of FDT blobs. Subimage and configuration specifications are extensions + to bootm (and other image-related commands) arguments' syntax that allow to + specify which particular subimage should be operated on. + + Subimage specification is used to denote a particular subimage. Configurations + are a bit more complex -- they are used to define a particualr booting setup, + for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple, + etc. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit fff888a1997ff7de9b29e24050fc4a0fd403ba16 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Feb 21 17:20:19 2008 +0100 + + [new uImage] Add gen_get_image() routine + + This routine assures that image (whether legacy or FIT) is not + in a special dataflash storage. + + If image address is a dataflash address image is moved to system RAM. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 75d3e8fbd93c14d9929d024c75af2d742c76db70 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Feb 21 17:20:18 2008 +0100 + + [new uImage] Pull in libfdt if CONFIG_FIT is enabled + + New uImage format (Flattened Image Tree) requires libfdt + functionality, print out error message if CONFIG_OF_LIBFDT + is not defined. + + New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT). + This commit turns it on by default. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728 Author: Michael Schwingen <michael@schwingen.org> Date: Mon Feb 18 23:16:35 2008 +0100 @@ -2050,6 +4085,312 @@ Date: Thu Jan 17 08:25:45 2008 -0600 Signed-off-by: Kumar Gala <galak@kernel.crashing.org> +commit 5cf746c303710329f8040d9c62ee354313e3e91f +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:59:09 2008 +0100 + + [new uImage] Move kernel data find code to get_kernel() routine + + Verification of the kernel image (in old format) and finding kernel + data is moved to a dedicated routine. The routine will also hold + support for, to be added, new image format. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 7b325454fd231d4273de3fe373850f777fb086bf +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:58:20 2008 +0100 + + [new uImage] Cleanup FDT handling in PPC do_boot_linux() + + Move FDT blob finding and relocation to a dedicated + get_fdt() routine. It increases code readability and + will make adding support for new uImage format easier. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit b6b0fe6460b7063ac60b9a3531ef210aedb31451 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:58:13 2008 +0100 + + [new uImage] Cleanup do_botm_linux() boot allocations + + This patch moves common pre-boot allocation steps shared between PPC + and M68K to a helper routines: + + common: + - get_boot_sp_limit() + - get_boot_cmline() + - get_boot_kbd() + + platform: + - set_clocks_in_mhz() + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:57:17 2008 +0100 + + [new uImage] Move ramdisk loading to a common routine + + Ramdisk loading code, including initrd_high variable handling, + was duplicated for PPC and M68K platforms. This patch creates + common helper routine that is being called from both platform + do_bootm_linux() routines. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:55:53 2008 +0100 + + [new uImage] Removed dead ramdisk code on microblaze architectures + + Microblaze do_bootm_linux() includes ramdisk processing code but + the ramdisk does not get used anywhere later on. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 5ad03eb3854c162684222a718b44c0716ea0db03 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:55:39 2008 +0100 + + [new uImage] Factor out common image_get_ramdisk() routine + + Architecture specific do_bootm_linux() routines share common + ramdisk image processing code. Move this code to a common + helper routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:08 2008 +0100 + + [new uImage] Move FDT error printing to common fdt_error() routine + + FDT error handling in PPC do_bootm_linux() shares the same message format. + This patch moves error message printing to a helper fdt_error() routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 42b73e8ee00d48004791dea64b8093fb974c57e1 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:07 2008 +0100 + + [new uImage] Factor out common routines for getting os/arch/type/comp names + + Move numeric-id to name translation for image os/arch/type/comp header + fields to a helper routines: image_get_os_name(), image_get_arch_name(), + image_get_type_name(), image_get_comp_name(). + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit e99c26694a384221d336f6448c06a57479c0baa4 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:07 2008 +0100 + + [new uImage] Remove standalone applications handling from boootm + + Standalone applications are supposed to be run using the "go" command. + This patch removes standalone images handling from the do_bootm(). + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:07 2008 +0100 + + [new uImage] Remove OF_FLAT_TREE support from PPC bootm code + + Support for OF_FLAT_TREE is to be obsoleted in the near future, + remove related code from the bootm routines. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 82850f3d32a2661868ec6876bed7a22c55cef718 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:06 2008 +0100 + + [new uImage] Use image API in SH do_bootm_linux() routine + + Introduce image handling API for lately added Hitachi SH architecture. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 4a995edec1ac163d9326d143ffe2b47e7543407f +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:06 2008 +0100 + + [new uImage] Rename architecture specific bootm code files + + Implementation of the do_bootm_linux() and other bootm helper routines is + architecture specific code. As such it resides in lib_<arch> directories + in files named <arch>_linux.c + + This patch renames those files to a more clear and accurate + lib_<arch>/bootm.c form. + + List of the renamed files: + lib_arm/armlinux.c -> lib_arm/bootm.c + lib_avr32/avr32_linux.c -> lib_avr32/bootm.c + lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c + lib_i386/i386_linux.c -> lib_i386/bootm.c + lib_m68k/m68k_linux.c -> lib_m68k/bootm.c + lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c + lib_mips/mips_linux.c -> lib_mips/bootm.c + lib_nios/nios_linux.c -> lib_nios/bootm.c + lib_nios2/nios_linux.c -> lib_nios2/bootm.c + lib_ppc/ppc_linux.c -> lib_ppc/bootm.c + lib_sh/sh_linux.c -> lib_sh/bootm.c + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 7582438c285bf0cef82909d0f232de64ec567a8a +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:06 2008 +0100 + + [new uImage] Return error on image move/uncompress overwrites + + Check for overwrites during image move/uncompress, return with error + when the original image gets corrupted. Report clear message to the user + and prevent further troubles when pointer to the corrupted images is passed + to do_bootm_linux routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit f13e7b2e993c61fed1f607962501e051940d6e80 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:12:17 2008 +0100 + + [new uImage] Cleanup image header pointer use in bootm code + + - use single image header pointer instead of a set of auxilliary variables. + - add multi component image helper routines: get component size/data address + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:17:10 2008 +0100 + + [new uImage] Cleanup cmd_bootm.c + + - sort and cleanup headers, declarations, etc. + - group related routines + - cleanup indentation, white spaces + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit af13cdbc01eaf88880978bfb4f603e012818ba24 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:45 2008 +0100 + + [new uImage] Add memmove_wd() common routine + + Move common, watchdog sensible memmove code to a helper memmmove_wd() routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:44 2008 +0100 + + [new uImage] Fix FDT header verification in PPC do_boot_linux() routine + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 15158971f49255ccef54f0979a942cfd3de2ae52 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:44 2008 +0100 + + [new uImage] Fix uImage header pointer use in i386 do_bootm_linux() + + Use image header copy instead of a (possibly corrupted) pointer to + a initial image location. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 261dcf4624b25f3c551efcf8634e9194fabba9c3 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:44 2008 +0100 + + [new uImage] Remove I386 uImage fake_header() routine + + I386 targets are not using a uImage format, instead fake header + is added to ram image before it is further processed by bootm. + + Remove this fixup and force proper uImage use for I386. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 559316faf7eae0614c91d77f509b57d6c4c091ba +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:44 2008 +0100 + + [new uImage] Move CHUNKSZ definition to image.h + + CHUNKSZ defined for PPC and M68K is set to the same value of 64K, + move this definition to a common header. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 321359f20823e0b8c5ad38b64d007a6c48cda16e +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:43 2008 +0100 + + [new uImage] Move gunzip() common code to common/gunzip.c + + Move gunzip(), zalloc() and zfree() to a separate file. + Share zalloc() and zfree() with cramfs uncompress routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit d45d5a18b6b36688f2365623f9d550566c664b5b +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:43 2008 +0100 + + [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux() + + Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more + readable in PPC variant of do_bootm_linux() routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:43 2008 +0100 + + [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c + + PPC implementation of do_bootm_linux() routine is moved to + a dedicated file lib_ppc/ppc_linux.c + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:14:09 2008 +0100 + + [new uImage] Define a API for image handling operations + + - Add inline helper macros for basic header processing + - Move common non inline code common/image.c + - Replace direct header access with the API routines + - Rename IH_CPU_* to IH_ARCH_* + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit ed29bc4e8142b46b626f67524207b36e43d9aad6 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:19:58 2008 +0100 + + Add missing cmd_ximg.o to common/Makefile + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3 Author: Grzegorz Bernacki <gjb@semihalf.com> Date: Mon Jan 28 10:15:02 2008 +0100 |