diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 212 |
1 files changed, 210 insertions, 2 deletions
@@ -1,3 +1,211 @@ +commit 787fa15860a57833e50bd30555079a9cd4e519b8 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Wed Jan 10 01:28:39 2007 +0100 + + Fix auto_update for MCC200 board. + + The invocation of do_auto_update() is moved to the end of the + misc_init_r() function, after the flash mappings have been + initialized. Please find attached a patch that implements that + change. + + Also correct the decoding of the keypad status. With this update, the + key that will trigger the update is Column 2, Row 2. + +commit 67fea022fa957f59653b5238c7496f80a6b70432 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 16:02:48 2007 +0100 + + SPC1920: cleanup memory contoller setup + +commit 8fc2102faa23593c80381437c09f7745a14deb40 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 14:57:14 2007 +0100 + + Fix the cpu speed setup to work with all boards. + +commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 14:57:13 2007 +0100 + + SPC1920: add support for the FM18L08 Ramtron FRAM + +commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 14:57:13 2007 +0100 + + SPC1920: update the HPI register addresses to work with the second + generation of hardware + +commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:13 2007 +0100 + + Miscellanious spc1920 related cleanups + +commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 14:57:12 2007 +0100 + + SPC1920 GO/NOGO led should be set to color red in U-Boot + +commit 0be62728aac459ba268d6d752ed49ec0e2bc7348 +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:12 2007 +0100 + + Add support for the DS3231 RTC + +commit 8139567b60d678584b05f0718a681f2047c5e14f +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:11 2007 +0100 + + SMC1 uses external CLK4 instead of BRG on spc1920 + +commit d8d9de1a02fbd880b613d607143d1f57342affc7 +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:10 2007 +0100 + + Update the SPC1920 CMB PLD driver + +commit 3f34f869162750e5e999fd140f884f5de952bcfe +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:10 2007 +0100 + + Add / enable I2C support on the spc1920 board + +commit d28707dbce1e9ac2017ad051da4133bf22b4204f +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:10 2007 +0100 + + Add support for the tms320671x host port interface (HPI) + +commit f4eb54529bb3664c3a562e488b460fe075f79d67 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Sun Jan 7 00:13:11 2007 +0100 + + Prepare for release 1.2.0 + +commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02 +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 6 15:58:09 2007 +0100 + + [PATCH] 44x: Fix problem with DDR controller setup (refresh rate) + + This patch fixes a problem with an incorrect setup for the refresh + timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f16c1da9577f06c5fc08651a4065537407de4635 +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 6 15:56:13 2007 +0100 + + [PATCH] Update ALPR board files + + This update brings the ALPR board support to the newest version. + It also fixes a problem with the NAND driver. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cd1d937f90250a32988c37b2b4af8364d25de8ed +Author: Stefan Roese <sr@denx.de> +Date: Fri Jan 5 11:46:05 2007 +0100 + + [PATCH] nand: Fix problem with oobsize calculation + + Here the description from Brian Brelsford <Brian_Brelsford@dell.com>: + + The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part + returns a 0x15. In the code fragment below bits [1:0] determine the + page size, it is ANDed via "(extid & 0x3)" then shifted out. The + next field is also ANDed with 0x3. However this is a one bit field + as defined in the Hynix and Samsung parts in the 4th ID byte that + determins the oobsize, not a two bit field. It works on Samsung as + bits[3:2] are 01. However for the Hynix there is a 11 in these two + bits, so the oob size gets messed up. + + I checked the correct linux code and the suggested fix from Brian is + also available in the linux nand mtd driver. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e +Author: Stefan Roese <sr@denx.de> +Date: Fri Jan 5 10:40:36 2007 +0100 + + [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx) + + This fix will make the MAL burst disabling patch for the Linux + EMAC driver obsolete. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 023889838282b6237b401664f22dd22dfba2c066 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jan 5 10:38:05 2007 +0100 + + [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board + + This code will optimize the DDR2 controller setup on a board specific + basis. + + Note: This code doesn't work right now on the NAND booting image for the + Sequoia board, since it doesn't fit into the 4kBytes for the SPL image. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cce4acbb68398634b8d011ed7bb0d12269c84230 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Dec 28 19:08:21 2006 +0100 + + Few V38B changes: + - fix a typo in V38B config file + - move watchdog initialisation earlier in the boot process + - add "wdt=off" to default kernel command line (disables kernel watchdog) + +commit 92eb729bad876725aeea908d2addba0800620840 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Wed Dec 27 01:26:13 2006 +0100 + + Fix bug in adaption of Stefano Babic's CFI driver patch. + +commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Sun Dec 24 01:42:57 2006 +0100 + + Minor code cleanup. + +commit d784fdb05900ada3686d5778783e1fb328e9fb66 +Author: Stefano Babic <sbabic@denx.de> +Date: Tue Dec 12 00:22:42 2006 +0100 + + Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode) + +commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2 +Author: Stefan Roese <sr@denx.de> +Date: Fri Dec 22 14:29:40 2006 +0100 + + [PATCH] Fix sequoia flash autodetection (finally correct) + + Now 32MByte and 64MByte FLASH is know to work and other + configurations should work too. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 82e5236a8b719543643fd26d5827938ab2b94818 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Fri Dec 22 10:30:26 2006 +0100 + + Minor code cleanup; update CHANGELOG. + +commit fa23044564091f05d9695beb7b5b9a931e7f41a4 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Thu Dec 21 17:17:02 2006 +0100 + + Added support for the TQM8272 board from TQ + + Signed-off-by: Heiko Schocher <hs@denx.de> + commit c84bad0ef60e7055ab0bd49b93069509cecc382a Author: Bartlomiej Sieka <tur@semihalf.com> Date: Wed Dec 20 00:29:43 2006 +0100 @@ -210,7 +418,7 @@ Date: Mon Nov 27 17:04:06 2006 +0100 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 - arguments to bootm. It removes the getenv("disable_of") test that used + arguments to bootm. It removes the getenv("disable_of") test that used to be used for this purpose. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> @@ -908,7 +1116,7 @@ Date: Tue Oct 24 23:47:37 2006 -0500 If a Multi-Image file contains a third image we try to use it as a device tree. The device tree image is assumed to be uncompressed in the - image file. We automatically allocate space for the device tree in memory + image file. We automatically allocate space for the device tree in memory and provide an 8k pad to allow more than a reasonable amount of growth. Additionally, a device tree that was contained in flash will now automatically |