diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 519 |
1 files changed, 519 insertions, 0 deletions
@@ -1,3 +1,173 @@ +commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286 +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 21 14:54:29 2007 +0100 + + ppc4xx: Fix file mode of include/configs/acadia.h + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d5f4614c9350d9333e575100fb250aab774d0258 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Wed Mar 21 14:41:46 2007 +0100 + + SPC1920: fix small clock routing bug + + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit 16c0cc1c82081a493ab87c51980b28336ce1bce8 +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 21 13:39:57 2007 +0100 + + [PATCH] Add AMCC Acadia (405EZ) eval board support + + This patch adds support for the new AMCC Acadia eval board. + + Please note that this Acadia/405EZ support is still in a beta stage. + Still lot's of cleanup needed but we need a preliminary release now. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e01bd218b00af73499331a1a701625a852cd286f +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 21 13:38:59 2007 +0100 + + [PATCH] Add AMCC PPC405EZ support + + This patch adds support for the new AMCC 405EZ PPC. It is in + preparation for the AMCC Acadia board support. + + Please note that this Acadia/405EZ support is still in a beta stage. + Still lot's of cleanup needed but we need a preliminary release now. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Wed Mar 21 08:45:17 2007 +0100 + + [PATCH] TQM8272: dont change the bits given from the HRCW + for the SIUMCR and BCR Register. + Fix the calculation for the EEprom Size + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 389b6bb50f745bf5038ce030300d8a8512e96f79 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Mar 19 13:10:08 2007 +0100 + + Remove obsoleted POST files. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 8423e5e31a7235d05a482627315fb11d49c17bd7 +Author: Stefan Roese <sr@denx.de> +Date: Fri Mar 16 21:11:42 2007 +0100 + + [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board + + Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the + DDR memory are dynamically programmed matching the total size + of the equipped memory (DIMM modules). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 76d1466f918b881cda2d259254761e73885093c2 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Tue Mar 13 13:38:05 2007 +0100 + + [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405 + boards in terms of unification. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Mar 13 16:05:55 2007 +0100 + + Make SC3 board build with 'make O='; use 'addcons' consistently + (SC3 and Jupiter used to use 'addcon' instead). + + Signed-off-by: Wolfgang Denk wd@denx.de + +commit 8502e30a28e492c756ea2d7df0ace026388fce4b +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Tue Mar 13 09:40:59 2007 +0100 + + [PATCH] update board config for jupiter Board: + added Hush Shell, + CONFIG_CMDLINE_EDITING, + CFG_ENV_ADDR_REDUND activated + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 992423ab43c2bcf6b704853bd00af77450915e20 +Author: Stefan Roese <sr@denx.de> +Date: Thu Mar 8 23:00:08 2007 +0100 + + ppc4xx: Fix file mode of sequoia.c + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit eb92f613556800f7483666db09d9a237ad911d4a +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Thu Mar 8 22:52:51 2007 +0100 + + Minor cleanup. + +commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1 +Author: John Otken john@softadvances.com <john@softadvances.com> +Date: Thu Mar 8 09:39:48 2007 -0600 + + ppc4xx: Clear Sequoia/Rainier security engine reset bits + + Signed-off-by: John Otken john@softadvances.com <john@softadvances.com> + +commit 650a330dd2539130c8c324791e2f9f75aed79d4e +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Thu Mar 8 16:26:52 2007 +0100 + + [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit d9fc703246840c4b268debf48c334ba55c597dc0 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Thu Mar 8 16:25:47 2007 +0100 + + [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit ced5b9029043397348cdc88e0cfcd6b1f629250b +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Thu Mar 8 16:23:11 2007 +0100 + + [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit d8a8ea5c476d37006fc7f85b7f903142795c8b14 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Thu Mar 8 16:20:32 2007 +0100 + + [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit f9fc6a5852a6335840882fa2111925010eea1abe +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Wed Mar 7 15:32:01 2007 +0100 + + fixed ethernet phy configuration for plu405 board + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 769104c9356594deb2092e204a39c05b33202d6c +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Thu Mar 8 21:49:27 2007 +0100 + + Minor cleanup + commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa Author: Stefan Roese <sr@denx.de> Date: Thu Mar 8 10:13:16 2007 +0100 @@ -122,6 +292,347 @@ Date: Tue Mar 6 07:47:04 2007 +0100 Signed-off-by: Stefan Roese <sr@denx.de> +commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Feb 28 00:02:04 2007 -0600 + + mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings + + (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit) + +commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Feb 27 23:51:42 2007 -0600 + + mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode + + The config value for: + * CFG_ACR_PIPE_DEP + * CFG_ACR_RPTCNT + * CFG_SPCR_TSEC1EP + * CFG_SPCR_TSEC2EP + * CFG_SCCR_TSEC1CM + * CFG_SCCR_TSEC2CM + + Were not being used when setting the appropriate register + + Added: + * CFG_SCCR_USBMPHCM + * CFG_SCCR_USBDRCM + * CFG_SCCR_PCICM + * CFG_SCCR_ENCCM + + To allow full config of the SCCR. + + Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349 + that were just bogus. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit d51b3cf371cd441030460ef19d36b2924c361b1a +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Thu Feb 22 20:06:57 2007 -0600 + + mpc83xx: update [local-]mac-address properties on UEC based devices + + 8360 and 832x weren't updating their [local-]mac-address + properties. This patch fixes that. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 61f4f912acbe60776c5e00df1ec94094ce672957 +Author: Timur Tabi <timur@freescale.com> +Date: Tue Feb 13 10:41:42 2007 -0600 + + mpc83xx: write MAC address to mac-address and local-mac-address + + Some device trees have a mac-address property, some have local-mac-address, + and some have both. To support all of these device trees, this patch + updates ftp_cpu_setup() to write the MAC address to mac-address if it exists. + This function already updates local-mac-address. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit 22d71a71f57fd5d38b27ac3848e50d790360a598 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Feb 27 18:41:08 2007 -0600 + + mpc83xx: add command line editing by default + +commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Feb 14 19:50:53 2007 -0600 + + mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers + + Disable G1TXCLK, G2TXCLK h/w buffers. This patch + fixes a networking timeout issue with MPC8360EA (Rev.2) PBs. + + Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com> + +commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f +Author: Xie Xiaobo <r63061@freescale.com> +Date: Wed Feb 14 18:27:17 2007 +0800 + + mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx + + The code supply fixed and SPD initialization for MPC83xx DDR2 Controller. + it pass DDR/DDR2 compliance tests. + + Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> + +commit b110f40bd180c6b560276589beedf753e97c46ce +Author: Xie Xiaobo <r63061@freescale.com> +Date: Wed Feb 14 18:27:06 2007 +0800 + + mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS + + MPC8360E rev2.0 have new spridr,and PVR value, + The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM. + + Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> + +commit 8d172c0f0d85998a256a95b7459a5403a30380ed +Author: Xie Xiaobo <r63061@freescale.com> +Date: Wed Feb 14 18:26:44 2007 +0800 + + mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS + + MPC8349E rev3.1 have new spridr,and PVR value, + The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM. + + Signed-off-by: Xie Xiaobo<X.Xie@freescale.com> + +commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b +Author: Joakim Tjernlund <joakim.tjernlund@transmode.se> +Date: Wed Jan 31 11:04:19 2007 +0100 + + mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c + + Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0) + which is used to se if an slave will ACK after receiving its address. + + Correct i2c probing to use this method as the old method could upset + a slave as it wrote a data byte to it. + + Add a small delay in i2c_init() to let the controller + shutdown any ongoing I2C activity. + + Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + +commit 7a78f148d6a7298e4fface680dc7eacd877b1aba +Author: Timur Tabi <timur@freescale.com> +Date: Wed Jan 31 15:54:29 2007 -0600 + + mpc83xx: Add support for the MPC8349E-mITX-GP + + Add support for the MPC8349E-mITX-GP, a stripped-down version of the + MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in + HRCW is 0) for the ITX and a README for the ITX and the ITX-GP. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit fab16807adad350f618024350c6950165c247c72 +Author: Timur Tabi <timur@freescale.com> +Date: Wed Jan 31 15:54:20 2007 -0600 + + mpc83xx: Delete sdram_init() for MPC8349E-mITX + + There is no SDRAM on any of the 8349 ITX variants, so function sdram_init() + never does anything. This patch deletes it. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit a87c856eb411b9365937d0d4b9c21e46adbe1c14 +Author: Dave Liu <daveliu@freescale.com> +Date: Fri Jan 19 10:43:26 2007 +0800 + + mpc83xx: Fix the LAW1/3 bug + + The patch solves the alignment problem of the local bus access windows to + render accessible the memory bank and PHY registers of UPC 1 (starting at + 0xf801 0000). What we actually did was to adjust the sizes of the bus + access windows so that the base address alignment requirement would be met. + + Signed-off-by: Chereji Marian <marian.chereji@freescale.com> + Signed-off-by: Gridish Shlomi <gridish@freescale.com> + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 97c4b397dce236a7318b304667bf89e59d08b17c +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jan 30 16:15:31 2007 -0600 + + mpc83xx: don't hang if watchdog configured on 8360, 832x + + don't hang if watchdog configured on 8360, 832x + + The watchdog programming model is the same across all 83xx devices; + make the code reflect that. + +commit b70047478570e371ce7223be342ce98afea0f7d6 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jan 30 16:15:21 2007 -0600 + + mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt + + protect memcpy to bad address if a local-mac-address is missing from dt + +commit 6752ed088c75c26a89b70c46b7326a4cd6015f29 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jan 30 16:15:04 2007 -0600 + + mpc83xx: make 8360 default environment fdt be 8360 (not 8349) + + make 8360 default environment fdt be 8360 (not 8349) + +commit a28899c910024a0226331df07207b1038c300c93 +Author: Emilian Medve <Emilian.Medve@freescale.com> +Date: Tue Jan 30 16:14:50 2007 -0600 + + mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC + + The problem is not gcc4 but the code itself. The BD_STATUS() macro can't + be used for busy-waiting since it strips the 'volatile' property from + the bd variable. gcc3 was working by pure luck. + + This is a follow on patch to "Fix the UEC driver bug of QE" + +commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Jan 30 14:08:30 2007 -0600 + + mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead + + The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all + MPC834X class processors. Change the protections from CONFIG_MPC8349 to + CONFIG_MPC834X so they are more generic. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit ae246dc6c1937c291014eadd90b6d48c438c7cb0 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Thu Jan 25 13:40:55 2007 -0600 + + mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL + +commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Jan 24 17:18:37 2007 -0600 + + mpc83xx: sort Makefile targets + + reordered targets alphabetically + +commit 91e25769771c1164ed63ffca0add49f934ae3343 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Tue Jan 16 11:38:14 2007 -0500 + + mpc83xx: U-Boot support for Wind River SBC8349 + + I've redone the SBC8349 support to match git-current, which + incorporates all the MPC834x updates from Freescale since the 1.1.6 + release, including the DDR changes. + + I've kept all the SBC8349 files as parallel as possible to the + MPC8349EMDS ones for ease of maintenance and to allow for easy + inspection of what was changed to support this board. Hence the SBC8349 + U-Boot has FDT support and everything else that the MPC8349EMDS has. + + Fortunately the Freescale updates added support for boards using CS0, + but I had to change spd_sdram.c to allow for board specific settings for + the sdram_clk_cntl (it is/was hard coded to zero, and that remains the + default if the board doesn't specify a value.) + + Hopefully this should be mergeable as-is and require no whitespace + cleanups or similar, but if something doesn't measure up then let me + know and I'll fix it. + + Thanks, + Paul. + +commit 05031db456ab227f3e3752f37b9b812b65bb83ad +Author: Sam Song <samsongshu@yahoo.com.cn> +Date: Thu Dec 14 19:03:21 2006 +0800 + + mpc83xx: Remove a redundant semicolon in mpc8349itx.c + + A redundant semicolon existed in mpc8349itx.c + should be removed. + + Signed-off-by: Sam Song <samsongshu@yahoo.com.cn> + +commit f35f358241c549be3f75cfe2eaa642914275b7ba +Author: Jerry Van Baren <gerald.vanbaren@comcast.net> +Date: Wed Dec 6 21:23:55 2006 -0500 + + mpc83xx: Put the version (and magic) after the HRCW. + + Put the version (and magic) after the HRCW. This puts it in a fixed + location in flash, not at the start of flash but as close as we can get. + + Signed-off-by: Jerry Van Baren <vanbaren@cideas.com> + +commit 48aecd969171a6e99a55fae04933857787f9a5bd +Author: Dave Liu <r63238@freescale.com> +Date: Thu Dec 7 21:14:51 2006 +0800 + + mpc83xx: Add the MPC832XEMDS board readme + + Add the MPC832XEMDS board readme + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 24c3aca3f1358b113d3215adb5433b156e99f72b +Author: Dave Liu <r63238@freescale.com> +Date: Thu Dec 7 21:13:15 2006 +0800 + + mpc83xx: Add support for the MPC832XEMDS board + + This patch supports DUART, ETH3/4 and PCI etc. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit e080313c32322e15ab5a18eb896a252858c57284 +Author: Dave Liu <r63238@freescale.com> +Date: Thu Dec 7 21:11:58 2006 +0800 + + mpc83xx: streamline the 83xx immr head file + + For better format and style, I streamlined the 83xx head files, + including immap_83xx.h and mpc83xx.h. In the old head files, 1) + duplicated macro definition appear in the both files; 2) the structure + of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The + macro definition put inside the each structure. So, I cleaned up the + structure of QE immr from immap_83xx.h, deleted the duplicated stuff and + moved the macro definition to mpc83xx.h, Just like MPC8260. + + CHANGELOG + + *streamline the 83xx immr head file + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Dec 6 11:38:17 2006 +0800 + + mpc83xx: Fix the UEC driver bug of QE + + The patch prevents the GCC tool chain from striping useful code for + optimization. It will make UEC ethernet driver workable, Otherwise the + UEC will fail in tx when you are using gcc4.x. but the driver can work + when using gcc3.4.3. + + CHANGELOG + + *Prevent the GCC from striping code for optimization, Otherwise the UEC + will tx failed when you are using gcc4.x. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35 Author: Stefan Roese <sr@denx.de> Date: Thu Mar 1 21:11:36 2007 +0100 @@ -1204,6 +1715,14 @@ Date: Tue Nov 28 11:04:45 2006 +0100 Signed-off-by: Stefan Roese <sr@denx.de> +commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2 +Author: Stefan Roese <sr@denx.de> +Date: Tue Nov 28 11:04:45 2006 +0100 + + [PATCH] nand: Fix patch merge problem + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa Author: Wolfgang Denk <wd@pollux.denx.de> Date: Mon Nov 27 22:53:53 2006 +0100 |