diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 587 |
1 files changed, 587 insertions, 0 deletions
@@ -1,3 +1,134 @@ +commit 8d9a8610b8256331132227e9e6585c6bd5742787 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Thu Nov 30 01:54:07 2006 +0100 + + Code cleanup. Update CHANGELOG. + +commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba +Author: Grant Likely <grant.likely@secretlab.ca> +Date: Wed Nov 29 16:23:42 2006 +0100 + + [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals + + The soc node of the mpc52xx needs to be loaded with the IPB bus frequency, + not the XLB frequency. + + This patch depends on the previous patches for MPC52xx device tree support + + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + Signed-off-by: Sylvain Munaut <tnt@246tNt.com> + +commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6 +Author: Stefan Roese <sr@denx.de> +Date: Wed Nov 29 15:42:37 2006 +0100 + + [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards + + This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) + and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are + quite similar and share the same board directory "prodrive/p3mx" + and the same config file "p3mx.h". + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 1bdd46832aeb569f5e04b1f20f64318525b6525a +Author: Stefan Roese <sr@denx.de> +Date: Wed Nov 29 12:53:15 2006 +0100 + + [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command + + In the bootvx command the load address was only read from the env + variable "loadaddr" and not optionally passed as paramter as described + in the help. This is fixed with this patch. The behaviour is now the + same as in the bootelf command. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592 +Author: Stefan Roese <sr@denx.de> +Date: Wed Nov 29 12:03:57 2006 +0100 + + [PATCH] include/ppc440.h minor error affecting interrupts + + Fixed include/ppc440.c for UIC address Bug + + Corrects bug affecting the addresses for the universal interrupt + controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips. + + Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a +Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> +Date: Tue Nov 28 16:17:27 2006 -0600 + + Make fsl-i2c not conflict with SOFT I2C + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit 14198bf768fdc958e3c1afd2404e5262208e98d7 +Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> +Date: Tue Nov 28 16:17:18 2006 -0600 + + Fix I2C master address initialization. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit cf3d045e51ca8dcc6cf759827140861d6ac25c04 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Nov 28 23:31:19 2006 -0600 + + Assign maintainers for mpc8349emds and mpc8360emds + + Dave for mpc8360emds, and me for mpc8349emds. + +commit 1aa934c81b77f2080d3ca4b226eab67b17a33961 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Nov 28 23:28:33 2006 -0600 + + Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c + + give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src + since they are passed by reference to ucc_get_cmxucr_reg and assigned. + +commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5 +Author: Timur Tabi <timur@freescale.com> +Date: Tue Nov 28 12:09:35 2006 -0600 + + mpc83xx: Miscellaneous code style fixes + + Implement various code style fixes and similar changes. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706 +Author: Stefan Roese <sr@denx.de> +Date: Tue Nov 28 17:55:49 2006 +0100 + + [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux. + + This patch adds the code and configuration necessary to boot with an + arch/powerpc Linux kernel. + + Signed-off-by: Grant Likely <grant.likely@gmail.com> + Acked-by: Jon Loeliger <jdl@freescale.com> + +commit e732faec95a83cb468b4850ae807c8301dde8f6a +Author: Stefan Roese <sr@denx.de> +Date: Tue Nov 28 16:09:24 2006 +0100 + + [PATCH] PPC4xx: 440SP Rev. C detection added + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0 +Author: Stefan Roese <sr@denx.de> +Date: Tue Nov 28 11:04:45 2006 +0100 + + [PATCH] nand: Fix patch merge problem + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa Author: Wolfgang Denk <wd@pollux.denx.de> Date: Mon Nov 27 22:53:53 2006 +0100 @@ -67,6 +198,46 @@ Date: Mon Nov 27 15:32:42 2006 +0100 Minor code cleanup. Update CHANGELOG. +commit 1729b92cde575476684bffe819d0b7791b57bff2 +Author: Stefan Roese <sr@denx.de> +Date: Mon Nov 27 14:52:04 2006 +0100 + + [PATCH] 4xx: Fix problem with board specific reset code (now for real) + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7 +Author: Stefan Roese <sr@denx.de> +Date: Mon Nov 27 14:49:51 2006 +0100 + + [PATCH] alpr: remove unused board specific flash driver + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1 +Author: Stefan Roese <sr@denx.de> +Date: Mon Nov 27 14:48:41 2006 +0100 + + [PATCH] 4xx: Fix problem with board specific reset code + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit ec0c2ec725aec9524a177a77ce75559e644a931a +Author: Stefan Roese <sr@denx.de> +Date: Mon Nov 27 14:46:06 2006 +0100 + + [PATCH] Remove testing 4xx enet PHY setup + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148 +Author: Stefan Roese <sr@denx.de> +Date: Mon Nov 27 14:12:17 2006 +0100 + + [PATCH] Update Prodrive ALPR board support (440GX) + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 78d620ebb5871d252270dedfad60c6568993b780 Author: Wolfgang Denk <wd@atlas.denx.de> Date: Thu Nov 23 22:58:58 2006 +0100 @@ -146,6 +317,379 @@ Date: Mon Nov 6 17:06:36 2006 +0100 This fixes get_ram_size() problems on MPC5200 Rev. B boards. +commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa +Author: Timur Tabi <timur@freescale.com> +Date: Fri Nov 3 19:15:00 2006 -0600 + + mpc83xx: Update 83xx to use fsl_i2c.c + + Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete + cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. + Added multiple I2C bus support to fsl_i2c.c. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit d239d74b1c937984bc519083a8e7de373a390f06 +Author: Timur Tabi <timur@freescale.com> +Date: Fri Nov 3 12:00:28 2006 -0600 + + mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR + + Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx + tree matches the other 8xxx trees. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit f7fb2e703ec9688541416962724adff70a7322cb +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Thu Nov 2 19:47:11 2006 -0600 + + mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c + +commit 90f30a710a3c619b5405860a686c4ddfc495d4b6 +Author: Dave Liu <daveliu@freescale.com> +Date: Thu Nov 2 18:05:50 2006 -0600 + + mpc83xx: Fix the incorrect dcbz operation + + The 834x rev1.x silicon has one CPU5 errata. + + The issue is when the data cache locked with + HID0[DLOCK], the dcbz instruction looks like no-op inst. + + The right behavior of the data cache is when the data cache + Locked with HID0[DLOCK], the dcbz instruction allocates + new tags in cache. + + The 834x rev3.0 and later and 8360 have not this bug inside. + + So, when 834x rev3.0/8360 are working with ECC, the dcbz + instruction will corrupt the stack in cache, the processor will + checkstop reset. + + However, the 834x rev1.x can work with ECC with these code, + because the sillicon has this cache bug. The dcbz will not + corrupt the stack in cache. + Really, it is the fault code running on fault sillicon. + + This patch fix the incorrect dcbz operation. Instead of + CPU FP writing to initialise the ECC. + + CHANGELOG: + * Fix the incorrect dcbz operation instead of CPU FP + writing to initialise the ECC memory. Otherwise, it + will corrupt the stack in cache, The processor will checkstop + reset. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Nov 1 00:10:40 2006 -0600 + + mpc83xx: add OF_FLAT_TREE bits to 83xx boards + + add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and + STDOUT_PATH configuration bits to mpc8349emds, + mpc8349itx, and mpc8360emds board code. + + redo environment to use bootm with the fdtaddr + for booting ARCH=powerpc kernels by default, + and provide default fdtaddr values. + +commit 48041365b3420589ad464ebc7752e0053538b729 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Nov 1 00:07:25 2006 -0600 + + mpc83xx: change ft code to modify local-mac-address property + + Update 83xx OF code to update local-mac-address properties + for ethernet instead of the obsolete 'address' property. + +commit 9ca880a250870a7d55754291b5591d2b5fe89b54 +Author: Timur Tabi <timur@freescale.com> +Date: Tue Oct 31 21:23:16 2006 -0600 + + mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS + + This patch also adds an improved I2C set_speed(), which handles all clock + frequencies. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit ac4b5622ce050b5ee1e154b98df630d778661632 +Author: Dave Liu <daveliu@freescale.com> +Date: Tue Oct 31 19:54:59 2006 -0600 + + mpc83xx: add the README.mpc8360emds + + add doc/README.mpc8360emds to accompany the new board support + +commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef +Author: Dave Liu <daveliu@freescale.com> +Date: Fri Nov 3 12:11:15 2006 -0600 + + mpc83xx: add QE ethernet support + + this patch adds support for the QUICC Engine based UCC gigabit ethernet device. + +commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73 +Author: Dave Liu <daveliu@freescale.com> +Date: Fri Nov 3 19:33:44 2006 -0600 + + mpc83xx: Add MPC8360EMDS basic board support + + Add support for the Freescale MPC8360EMDS board. + Includes DDR, DUART, Local Bus, PCI. + +commit 23892e49352de74f7fac36ff90bb1be143d195e3 +Author: Dave Liu <daveliu@freescale.com> +Date: Tue Oct 31 19:30:40 2006 -0600 + + mpc83xx: add the QUICC Engine (QE) immap file + + common QE immap file. Also required for 8360. + +commit b701652a4992bdcc62fb1a6038a85beef9e55da4 +Author: Dave Liu <daveliu@freescale.com> +Date: Tue Oct 31 19:25:38 2006 -0600 + + mpc83xx: Add 8360 specifics to 83xx immap + + Mainly add QE device dependencies, with appropriate 8360 protection. + Lindent also run. + +commit 988833324a7fda482c8ac3ca23eb539f8232e404 +Author: Timur Tabi <timur@freescale.com> +Date: Tue Oct 31 19:14:41 2006 -0600 + + mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX + + PREREQUISITE PATCHES: + + * This patch can only be applied after the following patches have been applied: + + 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2" + 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2" + + CHANGELOG: + + * For the 8349E-mITX, fix some size values in pci_init_board(), enable + the clock for the 2nd USB board (Linux kernel will hang otherwise), + and fix the CONFIG_BOOTARGS macro. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357 +Author: Timur Tabi <timur@freescale.com> +Date: Tue Oct 31 18:44:42 2006 -0600 + + mpc83xx: Add support for the MPC8349E-mITX + + PREREQUISITE PATCHES: + + * This patch can only be applied after the following patches have been applied: + + 1) DNX#2006090742000024 "Add support for multiple I2C buses" + 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" + 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" + 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" + 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" + + CHANGELOG: + + * Add support for the Freescale MPC8349E-mITX reference design platform. + The second TSEC (Vitesse 7385 switch) is not supported at this time. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit 183da6d9b446cc12123455844ad1187e2375626f +Author: Ben Warren <bwarren@qstreams.com> +Date: Tue Sep 12 10:15:53 2006 -0400 + + Additional MPC8349 support for multibus i2c + + Hello, + + Here is a patch for a file that was accidentally left out of a previous + attempt. + + It accompanies the patch with ticket DNX#2006090742000024 + + CHANGELOG: + Change PCI initialization to use new multi-bus I2C API. + + regards, + Ben + +commit b24f119d672b709d153ff2ac091d4aa63ec6877d +Author: Ben Warren <bwarren@qstreams.com> +Date: Thu Sep 7 16:51:04 2006 -0400 + + Multi-bus I2C implementation of MPC834x + + Hello, + + Attached is a patch implementing multiple I2C buses on the MPC834x CPU + family and the MPC8349EMDS board in particular. + This patch requires Patch 1 (Add support for multiple I2C buses). + Testing was performed on a 533MHz board. + + /*** Note: This patch replaces ticket DNX#2006083042000027 ***/ + + Signed-off-by: Ben Warren <bwarren@qstreams.com> + + CHANGELOG: + Implemented driver-level code to support two I2C buses on the + MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds + are 50kHz, 100kHz and 400kHz on each bus. + + regards, + Ben + +commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae +Author: Ben Warren <bwarren@qstreams.com> +Date: Thu Sep 7 16:50:54 2006 -0400 + + Add support for multiple I2C buses + + Hello, + + Attached is a patch providing support for multiple I2C buses at the + command level. The second part of the patch includes an implementation + for the MPC834x CPU and MPC8349EMDS board. + + /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ + + Signed-off-by: Ben Warren <bwarren@qstreams.com> + + Overview: + + 1. Include new 'i2c' command (based on USB implementation) using + CONFIG_I2C_CMD_TREE. + + 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that + the commands to change bus number and speed are only available under the + new 'i2c' command mentioned in the first bullet. + + 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus + systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form + of an array of bus-device pairs. Otherwise, it is an array of uchar. + + CHANGELOG: + Added new 'i2c' master command for all I2C interaction. This is + conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for + setting I2C bus speed as well as changing the active bus if the board + has more than one (conditionally compiled with + CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. + Updated README. + + regards, + Ben + +commit bed85caf872714ebf53013967a695c9d63acfc68 +Author: Timur Tabi <timur@freescale.com> +Date: Tue Oct 31 18:13:36 2006 -0600 + + mpc83xx: Add support for Errata DDR6 on MPC 834x systems + + CHANGELOG: + + * Errata DDR6, which affects all current MPC 834x processors, lists changes + required to maintain compatibility with various types of DDR memory. This + patch implements those changes. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit afd6e470f639883002c7c59d562690a5cb0f4865 +Author: Timur Tabi <timur@freescale.com> +Date: Wed Oct 25 18:45:23 2006 -0500 + + mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it + +commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a +Author: Timur Tabi <timur@freescale.com> +Date: Tue Aug 22 17:07:00 2006 -0500 + + mpc83xx: Add support for variable flash memory sizes on 83xx systems + + CHANGELOG: + + * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access + window registers, instead of using a hard-coded value of 8MB. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965 +Author: Tanya Jiang <tanya.jiang@freescale.com> +Date: Thu Aug 3 18:38:13 2006 +0800 + + mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros + + Unified TQM834x variable names with 83xx and consolidated macro + in preparation for the 8360 and other upcoming 83xx devices. + + Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> + +commit f6eda7f80ccc13d658020268c507d7173cf2e8aa +Author: Dave Liu <daveliu@freescale.com> +Date: Wed Oct 25 14:41:21 2006 -0500 + + mpc83xx: Changed to unified mpx83xx names and added common 83xx changes + + Incorporated the common unified variable names and the changes in preparation + for releasing mpc8360 patches. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 3894c46c27c64891f93ac04edde86a9fa9758d92 +Author: Tanya Jiang <tanya.jiang@freescale.com> +Date: Thu Aug 3 18:36:02 2006 +0800 + + mpc83xx: Fix missing build for mpc8349emds pci.c + + Make pci build for mpc8349emds + + Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> + +commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219 +Author: Tanya Jiang <tanya.jiang@freescale.com> +Date: Thu Aug 3 18:39:49 2006 +0800 + + mpc83xx: Removed unused file resetvec.S for mpc83xx cpu + + Removed unused file resetvec.S for mpc83xx cpu + + Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> + +commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf +Author: Nick Spence <Nick.Spence@freescale.com> +Date: Sat Sep 30 00:32:59 2006 -0700 + + NAND Flash verify across block boundaries + + This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is + defined + and the write crosses a block boundary. The pointer to the verification + buffer (bufstart) is not being updated to reflect the starting of the + new + block so the verification of the second block fails. + + CHANGELOG: + + * Fix NAND FLASH page verification across block boundaries + +commit f484dc791a3932537213c43c654cc1295c64b84c +Author: Nick Spence <nick.spence@freescale.com> +Date: Thu Sep 7 07:39:46 2006 -0700 + + Added RGMII support to the TSECs and Marvell 881111 Phy + + Added a phy initialization to adjust the RGMII RX and TX timing + Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode + + Signed-off-by: Nick Spence <nick.spence@freescale.com> + commit c59200443072353044aa4bf737a5a60f9a9af231 Author: Wolfgang Denk <wd@pollux.denx.de> Date: Thu Nov 2 15:15:01 2006 +0100 @@ -641,6 +1185,34 @@ Date: Tue Oct 10 17:02:22 2006 -0500 Fix whitespace and 80-col issues. +commit 5c912cb1c31266c66ca59b36f9b6f87296421d75 +Author: Stefan Roese <sr@denx.de> +Date: Sat Oct 7 11:36:51 2006 +0200 + + CFG_NAND_QUIET_TEST added to not warn upon missing NAND device + Patch by Stefan Roese, 07 Oct 2006 + +commit 5bc528fa4da751d472397b308137238a6465afd2 +Author: Stefan Roese <sr@denx.de> +Date: Sat Oct 7 11:35:25 2006 +0200 + + Update ALPR code (NAND support working now) + Patch by Stefan Roese, 07 Oct 2006 + +commit 77d5034847d328753b80c46b83f960a14a26f40e +Author: Stefan Roese <sr@denx.de> +Date: Sat Oct 7 11:33:03 2006 +0200 + + Remove compile warnings in fpga code + Patch by Stefan Roese, 07 Oct 2006 + +commit f3443867e90d2979a7dd1c65b0d537777e1f9850 +Author: Stefan Roese <sr@denx.de> +Date: Sat Oct 7 11:30:52 2006 +0200 + + Add CONFIG_BOARD_RESET to configure board specific reset function + Patch by Stefan Roese, 07 Oct 2006 + commit f55df18187e7a45cb73fec4370d12135e6691ae1 Author: John Traill <john.traill@freescale.com> Date: Fri Sep 29 08:23:12 2006 +0100 @@ -873,6 +1445,21 @@ Date: Wed Aug 16 10:54:09 2006 -0500 Signed-off-by: Matthew McClintock <msm@freescale.com> +commit 899620c2d66d4eef3b2a0034d062e71d45d886c9 +Author: Stefan Roese <sr@denx.de> +Date: Tue Aug 15 14:22:35 2006 +0200 + + Add initial support for the ALPR board from Prodrive + NAND needs some additional testing + Patch by Heiko Schocher, 15 Aug 2006 + +commit f0ff4692ff3372dec55074a8eb444943ab095abb +Author: Stefan Roese <sr@denx.de> +Date: Tue Aug 15 14:15:51 2006 +0200 + + Add FPGA Altera Cyclone 2 support + Patch by Heiko Schocher, 15 Aug 2006 + commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b Author: Jon Loeliger <jdl@freescale.com> Date: Mon Aug 14 15:33:38 2006 -0500 |