diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 1247 |
1 files changed, 1247 insertions, 0 deletions
@@ -1,3 +1,1234 @@ +commit 5f6c732affea9647762d27a4617a2ae64c52dceb +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 18 16:17:46 2007 +0200 + + Update CHANGELOG + +commit ad4eb555671d97f96dc56eab55103b1f86874b01 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 18 14:30:39 2007 +0200 + + MCC200 board: remove warning which is obsolete after PSoC firmware changes + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 3747a3f010b2b1442dec3e871c69788b6017aaae +Author: Domen Puncer <domen.puncer@telargo.com> +Date: Wed Apr 18 12:11:05 2007 +0200 + + [PATCH] icecube/lite5200b: document wakeup from low-power support + + Signed-off-by: Domen Puncer <domen.puncer@telargo.com> + +commit e673226ff9d6aa91b47ceac74b8c13770b06bb37 +Author: Stefan Roese <sr@denx.de> +Date: Wed Apr 18 12:07:47 2007 +0200 + + ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f +Author: Stefan Roese <sr@denx.de> +Date: Wed Apr 18 12:05:59 2007 +0200 + + ppc4xx: Add output for bootrom location to 405EZ ports + + Now 405EZ ports also show upon bootup from which boot device + they are configured to boot: + + U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05) + + CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz) + Bootstrap Option E - Boot ROM Location EBC (32 bits) + 16 kB I-Cache 16 kB D-Cache + Board: Acadia - AMCC PPC405EZ Evaluation Board + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3 +Author: Domen Puncer <domen.puncer@telargo.com> +Date: Mon Apr 16 14:00:13 2007 +0200 + + [PATCH] icecube/lite5200b: wakeup from low-power support + + U-Boot part of Lite5200b low power mode support. + Puts SDRAM out of self-refresh and transfers control to + address saved at physical 0x0. + + Signed-off-by: Domen Puncer <domen.puncer@telargo.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit 8048cdd56f04a756eeea4951f402bf5cc33785db +Author: Wolfgang Denk <wd@denx.de> +Date: Sat Apr 14 21:16:54 2007 +0200 + + Update CHANGELOG + +commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Sat Apr 14 05:26:48 2007 +0200 + + [Fix] Set the LED status register on the UC101 for the LXT971 PHY. + clear the Display after reset. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 7882751c78b7ecabfd49b0eff8de27661c71f16c +Author: Denis Peter <d.peter@mpl.ch> +Date: Fri Apr 13 09:13:33 2007 +0200 + + [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c + + Fix bug introduced by "Fix get_partition_info() parameter error in all + other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented + to use diskboot or scsiboot form another device than 0. + + Signed-off-by: Denis Peter <d.peter@mpl.ch> + +commit 0b94504d22e70f537c17a0d38c87edb6e370977d +Author: Greg Lopp <lopp@pobox.com> +Date: Fri Apr 13 08:02:24 2007 +0200 + + [PATCH] Fix use of "void *" for block dev read/write buffer pointers + + Signed-of-by: Greg Lopp <lopp@pobox.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13 +Author: Jeffrey Mann <mannj@embeddedplanet.com> +Date: Thu Apr 12 14:15:59 2007 +0200 + + ppc4xx: Fix i2c divisor calcularion for PPC4xx + + This patch fixes changes the i2c_init(...) function to use the function + get_OPB_freq() rather than calculating the OPB speed by + sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is + specific per processor. The prior method was not and so was calculating + the wrong speed for some PPC4xx processors. + + Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6c9ba919375db977aaad9146bf320c7afd07ae7a +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 11 17:25:01 2007 +0200 + + Update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 51056dd9863e6a1bc363afbbe1775c58cd967418 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 11 17:22:55 2007 +0200 + + Update for SC3 board + + * Make IDE timeout configurable through ide_reset_timeout variable. + * Use Newline as "password" string + * Use just a single partition in NAND flash + +commit c0707ce65677650b5ceab0500ee50ae5168afef2 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:34:06 2007 +0800 + + [Blackfin][PATCH] Kill off a bunch of common local prototypes + +commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:33:04 2007 +0800 + + [Blackfin][PATCH] Fix dynamic CPLB generation issue + +commit 0445e3a264251d75b1be45ef713c70726a2952f0 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:31:47 2007 +0800 + + [Blackfin][PATCH] minior cleanup + +commit 155fd766573981090e638b493d5857562151862e +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:31:18 2007 +0800 + + [Blackfin][PATCH] Fix copyright and update license + +commit 9fd437bbd75d282f899e1da50be20a2bf38450bc +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:30:25 2007 +0800 + + [Blackfin][PATCH] Add BF537 EMAC driver initialization + +commit 889256e8604e0c68db1d866d720894dffede9df6 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:29:55 2007 +0800 + + [Blackfin][PATCH] call real the system synchronize instruction + +commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:29:17 2007 +0800 + + [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it + +commit dfeeab2cd680df047e68e723b246adf6f33bb556 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:28:34 2007 +0800 + + [Blackfin][PATCH]: fix flash unaligned copy issue + +commit 31c98a88228021b314c89ebb8104fb6473da4471 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 4 02:09:30 2007 +0200 + + Minor coding style cleanup. + +commit 94abd7c0583ebe01e799b25f451201deeaab550d +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 4 01:49:15 2007 +0200 + + Minor cleanup. + +commit a65c5768e5537530bd1780af3d3fddc3113a163c +Author: Stefan Roese <sr@denx.de> +Date: Mon Apr 2 10:09:30 2007 +0200 + + ppc4xx: Change SysACE address on Katmai + + With this new base address of the Xilinx SystemACE controller + the Linux driver will be easier to adapt, since it can now be + mapped via the "normal" ioremap() call. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 14:30:53 2007 -0400 + + Fix some minor whitespace violations. + +commit 213bf8c822de8eecaf69860684469cdaba2e9e6a +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 12:23:51 2007 -0400 + + Add a flattened device tree (fdt) command (2 of 2) + + Modifications to the existing code to support the new fdt command. + +commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 12:22:10 2007 -0400 + + Add a flattened device tree (fdt) command (1 of 2) + + The fdt command uses David Gibson's libfdt library to manipulate as well + as print the flattened device tree. This patch is the new command, + the second part is the modifications to the existing code. + +commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 12:13:43 2007 -0400 + + libfdt: Enhanced and published fdt_next_tag() + + Enhanced the formerly private function _fdt_next_tag() to allow stepping + through the tree, used to produce a human-readable dump, and made + it part of the published interface. + Also added some comments. + +commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 12:05:39 2007 -0400 + + libfdt: Customizations for use by u-boot. + + Changes to David Gibson's original source to fit into u-boot's + environment. No functionality changes. + +commit 35748177c64a4a83a00057e93bb33e40278a2a96 +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 12:00:56 2007 -0400 + + libfdt: Import libfdt source (2 of 2) + + This adds the applicable libfdt source files (unmodified) and a README + to explain where the source came from. + +commit 7cd5da0fe877e7171a4cdd44880bce783132871a +Author: Gerald Van Baren <vanbaren@cideas.com> +Date: Sat Mar 31 11:59:59 2007 -0400 + + libfdt: Import libfdt source (1 of 2) + + This adds the applicable libfdt source files (unmodified) and a README + to explain where the source came from. + +commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 31 13:16:23 2007 +0200 + + ppc4xx: Update Katmai bootstrap command + + Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB + is selected. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cabee756a6532986729477c3cc1ea16ef8517ad2 +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 31 13:15:06 2007 +0200 + + ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) + + Additional RAM information is now printed upon powerup, like + DDR2 frequency and CAS latency. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 60723803431ac75cad085690789e433d5ab9174e +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 31 08:48:36 2007 +0200 + + ppc4xx: Change Yucca config file to support ECC + + With the updated 44x DDR2 driver the Yucca board now supports + ECC generation and checking. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 490e5730c674b20d708b783a2c5ffd7208f83873 +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 31 08:47:34 2007 +0200 + + ppc4xx: Fix "bootstrap" command for Katmai board + + The board specific "bootstrap" command is now fixed and can + be used for the AMCC Katmai board to configure different + CPU/PLB/OPB frequencies. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1 +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 31 08:46:08 2007 +0200 + + ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) + + Fix a bug in the auto calibration routine. This driver now runs + more reliable with the tested modules. It's also tested with + 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 342cd097be1e7affe82f42ab3da220959a699e64 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 30 22:52:09 2007 +0200 + + [PATCH] Clean include dependence + +commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 30 22:42:45 2007 +0200 + + [CLEAN] Remove inefficient Suzaku code + +commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 28 15:03:16 2007 +0200 + + Merge some AMCC make targets to keep the top-level Makefile smaller + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 28 14:52:12 2007 +0200 + + i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined + + The "old" i2c commands (iprobe, imd...) are now compiled in again, + even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE + config option. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a +Author: Michal Simek <monstr@monstr.eu> +Date: Tue Mar 27 00:32:16 2007 +0200 + + PATCH: Resolve GPL license problem + +commit 1798049522f594013aea29457d46794298c6ae15 +Author: Michal Simek <root@monstr.eu> +Date: Mon Mar 26 01:39:07 2007 +0200 + + Support for XUPV2P board + Reset support + BSP autoconfig support + +commit 0d974d5297349504a2ddfa09314be573b5df320a +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 24 15:57:09 2007 +0100 + + [PATCH] Add 4xx GPIO functions + + This patch adds some 4xx GPIO functions. It also moves some of the + common code and defines into a common 4xx GPIO header file. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11 +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 24 15:55:58 2007 +0100 + + [PATCH] Small Sequoia cleanup + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf +Author: Stefan Roese <sr@denx.de> +Date: Sat Mar 24 15:45:34 2007 +0100 + + [PATCH] Clean up 40EZ/Acadia support + + This patch cleans up all the open issue of the preliminary + Acadia support. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997 +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Dec 12 11:02:20 2006 -0600 + + Fix 8641HPCN problem with ld version 2.16 + + (Dot outside sections problem). + + This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c +Author: Haiying Wang <haiying.wang@freescale.com> +Date: Thu Dec 7 10:35:55 2006 -0600 + + Set Rev 2.x 86xx PIC in mixed mode. + + Prevent false interrupt from hanging Linux as MSR[EE] is set + to enable interrupts by changing the PIC out of the default + pass through mode into mixed mode. + + Signed-off-by: Haiying Wang <haiying.wang@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e +Author: Jason Jin <jason.jin@freescale.com> +Date: Thu Dec 7 10:32:35 2006 -0600 + + Add flash cmd function to 8641HPCN ramboot + + Also fixes some commmand for 8641 HPCN ramboot case. + + Signed-off-by: Jason Jin <jason.jin@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46 +Author: Ed Swarthout <ed.swarthout@freescale.com> +Date: Thu Dec 7 10:34:14 2006 -0600 + + Add support for 8641 Rev 2 silicon. + + Without this patch, I am unable to get to the prompt on rev 2 silicon. + Only set ddrioovcr for rev1. + + Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 44ba464b99001f8bd1c456a1e9d59726252f707a +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Mar 22 00:13:12 2007 +0100 + + Code cleanup / re-insert previous Copyright entries. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Mar 21 23:26:15 2007 +0100 + + Code cleanup. Update CHANGELOG + +commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286 +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 21 14:54:29 2007 +0100 + + ppc4xx: Fix file mode of include/configs/acadia.h + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d5f4614c9350d9333e575100fb250aab774d0258 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Wed Mar 21 14:41:46 2007 +0100 + + SPC1920: fix small clock routing bug + + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit 16c0cc1c82081a493ab87c51980b28336ce1bce8 +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 21 13:39:57 2007 +0100 + + [PATCH] Add AMCC Acadia (405EZ) eval board support + + This patch adds support for the new AMCC Acadia eval board. + + Please note that this Acadia/405EZ support is still in a beta stage. + Still lot's of cleanup needed but we need a preliminary release now. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e01bd218b00af73499331a1a701625a852cd286f +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 21 13:38:59 2007 +0100 + + [PATCH] Add AMCC PPC405EZ support + + This patch adds support for the new AMCC 405EZ PPC. It is in + preparation for the AMCC Acadia board support. + + Please note that this Acadia/405EZ support is still in a beta stage. + Still lot's of cleanup needed but we need a preliminary release now. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Wed Mar 21 08:45:17 2007 +0100 + + [PATCH] TQM8272: dont change the bits given from the HRCW + for the SIUMCR and BCR Register. + Fix the calculation for the EEprom Size + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 654589873dbafcf104dff133ce0d03a4506e9cc3 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Tue Mar 20 18:16:24 2007 +0800 + + [Blackfin][PATCH] Add BF561 EZKIT board support + +commit a6154fd1cfd020f6da8527e0365b1020a11a71d0 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Mon Mar 19 22:55:58 2007 +0800 + + [Blackfin][PATCH] minor cleanup + +commit 389b6bb50f745bf5038ce030300d8a8512e96f79 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Mar 19 13:10:08 2007 +0100 + + Remove obsoleted POST files. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Mon Mar 19 01:26:11 2007 +0800 + + [PATCH] Add flash chip M29W320ET/B support + +commit 26bf7deca364a5b33f39e8f14ddd3f4081345015 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Mon Mar 19 01:24:52 2007 +0800 + + [Blackfin][PATCH] Add BF537 stamp board support + +commit 8423e5e31a7235d05a482627315fb11d49c17bd7 +Author: Stefan Roese <sr@denx.de> +Date: Fri Mar 16 21:11:42 2007 +0100 + + [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board + + Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the + DDR memory are dynamically programmed matching the total size + of the equipped memory (DIMM modules). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 76d1466f918b881cda2d259254761e73885093c2 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Tue Mar 13 13:38:05 2007 +0100 + + [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405 + boards in terms of unification. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Mar 13 16:05:55 2007 +0100 + + Make SC3 board build with 'make O='; use 'addcons' consistently + (SC3 and Jupiter used to use 'addcon' instead). + + Signed-off-by: Wolfgang Denk wd@denx.de + +commit 8502e30a28e492c756ea2d7df0ace026388fce4b +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Tue Mar 13 09:40:59 2007 +0100 + + [PATCH] update board config for jupiter Board: + added Hush Shell, + CONFIG_CMDLINE_EDITING, + CFG_ENV_ADDR_REDUND activated + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 0d93de11449390a5984b0236c3612e50f6dbb7e8 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Mon Mar 12 12:11:55 2007 +0800 + + [Blackfin][PATCH] minor cleanup + +commit bfa5754a58477ac917d21527cd0f079d87cf188e +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Mon Mar 12 01:42:06 2007 +0800 + + [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue + +commit 8440bb14581a294375c34b91b42512f9753d1130 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Mon Mar 12 00:25:14 2007 +0800 + + [Blackfin][PATCH] code cleanup + +commit cfc67116a706fd18b8f6a9c11a16753c5626d689 +Author: Michal Simek <monstr@monstr.eu> +Date: Sun Mar 11 13:48:24 2007 +0100 + + [Microblaze][PATCH] part 2 + timer support + interrupt controller support + flash support + ethernet support + cache support + board information support + env support + booting image support + + adding support for Xilinx ML401 + +commit 76316a318de91f6184e7c22a10e02d275ade2441 +Author: Michal Simek <monstr@monstr.eu> +Date: Sun Mar 11 13:42:58 2007 +0100 + + [Microblaze][PATCH] + timer support + interrupt controller support + flash support + ethernet support + cache support + board information support + env support + booting image support + + adding support for Xilinx ML401 + +commit 8db13d63157811c839d15a313d9f2d2f5fd10af3 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Sat Mar 10 23:49:29 2007 +0800 + + [Blackfin][PATCH] code cleanup + +commit ef26a08fef928b7bc11ae2c109e638dc3a016d91 +Author: Aubrey.Li <aubrey.adi@gmail.com> +Date: Fri Mar 9 13:40:56 2007 +0800 + + [Blackfin][PATCH-2/2] Common files changed to support bf533 platform + +commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f +Author: Aubrey.Li <aubrey.adi@gmail.com> +Date: Fri Mar 9 13:38:44 2007 +0800 + + [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support + +commit 992423ab43c2bcf6b704853bd00af77450915e20 +Author: Stefan Roese <sr@denx.de> +Date: Thu Mar 8 23:00:08 2007 +0100 + + ppc4xx: Fix file mode of sequoia.c + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit eb92f613556800f7483666db09d9a237ad911d4a +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Thu Mar 8 22:52:51 2007 +0100 + + Minor cleanup. + +commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1 +Author: John Otken john@softadvances.com <john@softadvances.com> +Date: Thu Mar 8 09:39:48 2007 -0600 + + ppc4xx: Clear Sequoia/Rainier security engine reset bits + + Signed-off-by: John Otken john@softadvances.com <john@softadvances.com> + +commit 650a330dd2539130c8c324791e2f9f75aed79d4e +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Thu Mar 8 16:26:52 2007 +0100 + + [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit d9fc703246840c4b268debf48c334ba55c597dc0 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Thu Mar 8 16:25:47 2007 +0100 + + [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit ced5b9029043397348cdc88e0cfcd6b1f629250b +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Thu Mar 8 16:23:11 2007 +0100 + + [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit d8a8ea5c476d37006fc7f85b7f903142795c8b14 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Thu Mar 8 16:20:32 2007 +0100 + + [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit f9fc6a5852a6335840882fa2111925010eea1abe +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Wed Mar 7 15:32:01 2007 +0100 + + fixed ethernet phy configuration for plu405 board + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 769104c9356594deb2092e204a39c05b33202d6c +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Thu Mar 8 21:49:27 2007 +0100 + + Minor cleanup + +commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa +Author: Stefan Roese <sr@denx.de> +Date: Thu Mar 8 10:13:16 2007 +0100 + + [PATCH] Update AMCC Luan 440SP eval board support + + The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR + inititializition. This includes DDR auto calibration and support + for different DIMM modules, instead of the fixed setup used in + the earlier version. + + This patch also enables the cache in FLASH for the startup + phase of U-Boot (while running from FLASH). After relocating to + SDRAM the cache is disabled again. This will speed up the boot + process, especially the SDRAM setup, since there are some loops + for memory testing (auto calibration). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 2f5df47351910a2936c7741cf111855829200943 +Author: Stefan Roese <sr@denx.de> +Date: Thu Mar 8 10:10:18 2007 +0100 + + [PATCH] Update AMCC Yucca 440SPe eval board support + + The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR + inititializition. This includes DDR auto calibration and support + for different DIMM modules, instead of the fixed setup used in + the earlier version. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 2721a68a9ea91f1e494649ce68b2577261f578e2 +Author: Stefan Roese <sr@denx.de> +Date: Thu Mar 8 10:07:18 2007 +0100 + + ppc4xx: Small AMCC Katmai 440SPe update + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit df294497479b1dca6dd86318b2a912f72fede0df +Author: Stefan Roese <sr@denx.de> +Date: Thu Mar 8 10:06:09 2007 +0100 + + ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit fa1aef15bcd47736687be1af544506e90fba545d +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 7 16:43:00 2007 +0100 + + [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board + + Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the + DDR memory are dynamically programmed matching the total size + of the equipped memory (DIMM modules). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e2ebe696818939e2b974628be9c921ea3fe9de13 +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 7 16:39:36 2007 +0100 + + [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's + + This patch fixes a problem that occurs when 2 DIMM's are + used. This problem was first spotted and fixed by Gerald Jackson + <gerald.jackson@reaonixsecurity.com> but this patch fixes the + problem in a little more clever way. + + This patch also adds the nice functionality to dynamically + create the TLB entries for the SDRAM (tlb.c). So we should + never run into such problems with wrong (too short) TLB + initialization again on these platforms. + + As this feature is new to the "old" 44x SPD DDR driver, it + has to be enabled via the CONFIG_PROG_SDRAM_TLB define. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 39218433983417b9df087976a79e3f80dd5e83d6 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Mar 7 16:33:44 2007 +0100 + + UC101: fix compiler warnings + +commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Wed Mar 7 16:19:46 2007 +0100 + + HMI1001: fix build error, cleanup compiler warnings. + +commit ad5bb451ade552c44bef9119d907929ebc2c126f +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Tue Mar 6 18:08:43 2007 +0100 + + Restructure POST directory to support of other CPUs, boards, etc. + +commit a5284efd125967675b2e9c6ef7b95832268ad360 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Tue Mar 6 18:01:47 2007 +0100 + + Fix HOSTARCH handling. + Patch by Mike Frysinger, Mar 05 2007 + +commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44 +Author: Stefan Roese <sr@denx.de> +Date: Tue Mar 6 07:47:04 2007 +0100 + + [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup + + As provided by the AMCC applications team, this patch optimizes the + DDR2 setup for 166MHz bus speed. The values provided are also save + to use on a "normal" 133MHz PLB bus system. Only the refresh counter + setup has to be adjusted as done in this patch. + + For this the NAND booting version had to include the "speed.c" file + from the cpu/ppc4xx directory. With this addition the NAND SPL image + will just fit into the 4kbytes of program space. gcc version 4.x as + provided with ELDK 4.x is needed to generate this optimized code. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Feb 28 00:02:04 2007 -0600 + + mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings + + (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit) + +commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Feb 27 23:51:42 2007 -0600 + + mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode + + The config value for: + * CFG_ACR_PIPE_DEP + * CFG_ACR_RPTCNT + * CFG_SPCR_TSEC1EP + * CFG_SPCR_TSEC2EP + * CFG_SCCR_TSEC1CM + * CFG_SCCR_TSEC2CM + + Were not being used when setting the appropriate register + + Added: + * CFG_SCCR_USBMPHCM + * CFG_SCCR_USBDRCM + * CFG_SCCR_PCICM + * CFG_SCCR_ENCCM + + To allow full config of the SCCR. + + Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349 + that were just bogus. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit d51b3cf371cd441030460ef19d36b2924c361b1a +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Thu Feb 22 20:06:57 2007 -0600 + + mpc83xx: update [local-]mac-address properties on UEC based devices + + 8360 and 832x weren't updating their [local-]mac-address + properties. This patch fixes that. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 61f4f912acbe60776c5e00df1ec94094ce672957 +Author: Timur Tabi <timur@freescale.com> +Date: Tue Feb 13 10:41:42 2007 -0600 + + mpc83xx: write MAC address to mac-address and local-mac-address + + Some device trees have a mac-address property, some have local-mac-address, + and some have both. To support all of these device trees, this patch + updates ftp_cpu_setup() to write the MAC address to mac-address if it exists. + This function already updates local-mac-address. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit 22d71a71f57fd5d38b27ac3848e50d790360a598 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Feb 27 18:41:08 2007 -0600 + + mpc83xx: add command line editing by default + +commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Feb 14 19:50:53 2007 -0600 + + mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers + + Disable G1TXCLK, G2TXCLK h/w buffers. This patch + fixes a networking timeout issue with MPC8360EA (Rev.2) PBs. + + Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com> + +commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f +Author: Xie Xiaobo <r63061@freescale.com> +Date: Wed Feb 14 18:27:17 2007 +0800 + + mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx + + The code supply fixed and SPD initialization for MPC83xx DDR2 Controller. + it pass DDR/DDR2 compliance tests. + + Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> + +commit b110f40bd180c6b560276589beedf753e97c46ce +Author: Xie Xiaobo <r63061@freescale.com> +Date: Wed Feb 14 18:27:06 2007 +0800 + + mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS + + MPC8360E rev2.0 have new spridr,and PVR value, + The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM. + + Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> + +commit 8d172c0f0d85998a256a95b7459a5403a30380ed +Author: Xie Xiaobo <r63061@freescale.com> +Date: Wed Feb 14 18:26:44 2007 +0800 + + mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS + + MPC8349E rev3.1 have new spridr,and PVR value, + The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM. + + Signed-off-by: Xie Xiaobo<X.Xie@freescale.com> + +commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b +Author: Joakim Tjernlund <joakim.tjernlund@transmode.se> +Date: Wed Jan 31 11:04:19 2007 +0100 + + mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c + + Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0) + which is used to se if an slave will ACK after receiving its address. + + Correct i2c probing to use this method as the old method could upset + a slave as it wrote a data byte to it. + + Add a small delay in i2c_init() to let the controller + shutdown any ongoing I2C activity. + + Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + +commit 7a78f148d6a7298e4fface680dc7eacd877b1aba +Author: Timur Tabi <timur@freescale.com> +Date: Wed Jan 31 15:54:29 2007 -0600 + + mpc83xx: Add support for the MPC8349E-mITX-GP + + Add support for the MPC8349E-mITX-GP, a stripped-down version of the + MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in + HRCW is 0) for the ITX and a README for the ITX and the ITX-GP. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit fab16807adad350f618024350c6950165c247c72 +Author: Timur Tabi <timur@freescale.com> +Date: Wed Jan 31 15:54:20 2007 -0600 + + mpc83xx: Delete sdram_init() for MPC8349E-mITX + + There is no SDRAM on any of the 8349 ITX variants, so function sdram_init() + never does anything. This patch deletes it. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit a87c856eb411b9365937d0d4b9c21e46adbe1c14 +Author: Dave Liu <daveliu@freescale.com> +Date: Fri Jan 19 10:43:26 2007 +0800 + + mpc83xx: Fix the LAW1/3 bug + + The patch solves the alignment problem of the local bus access windows to + render accessible the memory bank and PHY registers of UPC 1 (starting at + 0xf801 0000). What we actually did was to adjust the sizes of the bus + access windows so that the base address alignment requirement would be met. + + Signed-off-by: Chereji Marian <marian.chereji@freescale.com> + Signed-off-by: Gridish Shlomi <gridish@freescale.com> + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 97c4b397dce236a7318b304667bf89e59d08b17c +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jan 30 16:15:31 2007 -0600 + + mpc83xx: don't hang if watchdog configured on 8360, 832x + + don't hang if watchdog configured on 8360, 832x + + The watchdog programming model is the same across all 83xx devices; + make the code reflect that. + +commit b70047478570e371ce7223be342ce98afea0f7d6 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jan 30 16:15:21 2007 -0600 + + mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt + + protect memcpy to bad address if a local-mac-address is missing from dt + +commit 6752ed088c75c26a89b70c46b7326a4cd6015f29 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jan 30 16:15:04 2007 -0600 + + mpc83xx: make 8360 default environment fdt be 8360 (not 8349) + + make 8360 default environment fdt be 8360 (not 8349) + +commit a28899c910024a0226331df07207b1038c300c93 +Author: Emilian Medve <Emilian.Medve@freescale.com> +Date: Tue Jan 30 16:14:50 2007 -0600 + + mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC + + The problem is not gcc4 but the code itself. The BD_STATUS() macro can't + be used for busy-waiting since it strips the 'volatile' property from + the bd variable. gcc3 was working by pure luck. + + This is a follow on patch to "Fix the UEC driver bug of QE" + +commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Jan 30 14:08:30 2007 -0600 + + mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead + + The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all + MPC834X class processors. Change the protections from CONFIG_MPC8349 to + CONFIG_MPC834X so they are more generic. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit ae246dc6c1937c291014eadd90b6d48c438c7cb0 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Thu Jan 25 13:40:55 2007 -0600 + + mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL + +commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Jan 24 17:18:37 2007 -0600 + + mpc83xx: sort Makefile targets + + reordered targets alphabetically + +commit 91e25769771c1164ed63ffca0add49f934ae3343 +Author: Paul Gortmaker <paul.gortmaker@windriver.com> +Date: Tue Jan 16 11:38:14 2007 -0500 + + mpc83xx: U-Boot support for Wind River SBC8349 + + I've redone the SBC8349 support to match git-current, which + incorporates all the MPC834x updates from Freescale since the 1.1.6 + release, including the DDR changes. + + I've kept all the SBC8349 files as parallel as possible to the + MPC8349EMDS ones for ease of maintenance and to allow for easy + inspection of what was changed to support this board. Hence the SBC8349 + U-Boot has FDT support and everything else that the MPC8349EMDS has. + + Fortunately the Freescale updates added support for boards using CS0, + but I had to change spd_sdram.c to allow for board specific settings for + the sdram_clk_cntl (it is/was hard coded to zero, and that remains the + default if the board doesn't specify a value.) + + Hopefully this should be mergeable as-is and require no whitespace + cleanups or similar, but if something doesn't measure up then let me + know and I'll fix it. + + Thanks, + Paul. + +commit 05031db456ab227f3e3752f37b9b812b65bb83ad +Author: Sam Song <samsongshu@yahoo.com.cn> +Date: Thu Dec 14 19:03:21 2006 +0800 + + mpc83xx: Remove a redundant semicolon in mpc8349itx.c + + A redundant semicolon existed in mpc8349itx.c + should be removed. + + Signed-off-by: Sam Song <samsongshu@yahoo.com.cn> + +commit f35f358241c549be3f75cfe2eaa642914275b7ba +Author: Jerry Van Baren <gerald.vanbaren@comcast.net> +Date: Wed Dec 6 21:23:55 2006 -0500 + + mpc83xx: Put the version (and magic) after the HRCW. + + Put the version (and magic) after the HRCW. This puts it in a fixed + location in flash, not at the start of flash but as close as we can get. + + Signed-off-by: Jerry Van Baren <vanbaren@cideas.com> + +commit 48aecd969171a6e99a55fae04933857787f9a5bd +Author: Dave Liu <r63238@freescale.com> +Date: Thu Dec 7 21:14:51 2006 +0800 + + mpc83xx: Add the MPC832XEMDS board readme + + Add the MPC832XEMDS board readme + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 24c3aca3f1358b113d3215adb5433b156e99f72b +Author: Dave Liu <r63238@freescale.com> +Date: Thu Dec 7 21:13:15 2006 +0800 + + mpc83xx: Add support for the MPC832XEMDS board + + This patch supports DUART, ETH3/4 and PCI etc. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit e080313c32322e15ab5a18eb896a252858c57284 +Author: Dave Liu <r63238@freescale.com> +Date: Thu Dec 7 21:11:58 2006 +0800 + + mpc83xx: streamline the 83xx immr head file + + For better format and style, I streamlined the 83xx head files, + including immap_83xx.h and mpc83xx.h. In the old head files, 1) + duplicated macro definition appear in the both files; 2) the structure + of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The + macro definition put inside the each structure. So, I cleaned up the + structure of QE immr from immap_83xx.h, deleted the duplicated stuff and + moved the macro definition to mpc83xx.h, Just like MPC8260. + + CHANGELOG + + *streamline the 83xx immr head file + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Dec 6 11:38:17 2006 +0800 + + mpc83xx: Fix the UEC driver bug of QE + + The patch prevents the GCC tool chain from striping useful code for + optimization. It will make UEC ethernet driver workable, Otherwise the + UEC will fail in tx when you are using gcc4.x. but the driver can work + when using gcc3.4.3. + + CHANGELOG + + *Prevent the GCC from striping code for optimization, Otherwise the UEC + will tx failed when you are using gcc4.x. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35 +Author: Stefan Roese <sr@denx.de> +Date: Thu Mar 1 21:11:36 2007 +0100 + + [PATCH] Update AMCC Katmai 440SPe eval board support + + This patch updates the recently added Katmai board support. The biggest + change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2 + driver. + + Please note, that still some problems are left with some memory + configurations. See the driver for more details. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a +Author: Stefan Roese <sr@denx.de> +Date: Thu Mar 1 07:03:25 2007 +0100 + + [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit ccbc7036648e465697ca298ba51e0e76dda352a0 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Wed Feb 28 01:28:53 2007 +0100 + + SC3: fix typo in default environment + +commit e344568b1b46af85ec32d815586f91bc115d6223 +Author: Sergei Poselenov <sposelenov@emcraft.com> +Date: Tue Feb 27 20:15:30 2007 +0300 + + MCC200: Fixes for update procedure + + - fix logic error in image type handling + - make sure file system images (cramfs etc.) get stored in flash + with image header stripped so they can be mounted through MTD + +commit 743571145b37182757d4e688a77860b36ee77573 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Tue Feb 27 14:26:04 2007 +0100 + + Minor code cleanup. + commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72 Author: Sergei Poselenov <sposelenov@emcraft.com> Date: Tue Feb 27 12:40:16 2007 +0300 @@ -293,6 +1524,14 @@ Date: Mon Feb 19 08:23:15 2007 +0100 Signed-off-by: Stefan Roese <sr@denx.de> +commit 2605e90bf676d48123afe5719a846d2b52b24aac +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Fri Feb 16 07:57:42 2007 +0100 + + [PATCH] Added support for the jupiter board. + + Signed-off-by: Heiko Schocher <hs@denx.de> + commit 497d012e5be0194e1084073d0081eb1a844796b2 Author: Gary Jennejohn <garyj@pollux.denx.de> Date: Mon Feb 12 13:11:50 2007 +0100 @@ -1027,6 +2266,14 @@ Date: Tue Nov 28 11:04:45 2006 +0100 Signed-off-by: Stefan Roese <sr@denx.de> +commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2 +Author: Stefan Roese <sr@denx.de> +Date: Tue Nov 28 11:04:45 2006 +0100 + + [PATCH] nand: Fix patch merge problem + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa Author: Wolfgang Denk <wd@pollux.denx.de> Date: Mon Nov 27 22:53:53 2006 +0100 |