diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 1451 |
1 files changed, 1451 insertions, 0 deletions
@@ -1,3 +1,1443 @@ +commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace +Author: Dave Liu <r63238@freescale.com> +Date: Fri Jan 18 10:07:04 2008 +0800 + + mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h + + The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb + cause the 83xx immap broken, so the DMA and PCI will + be failed. + + The patch fix the struct spi8xxx and rm struct spi83xx. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 57a127201eb3d8cc19170a008e0bd7af608bd72f +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Tue Jan 15 14:15:46 2008 -0600 + + ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit 1aee111135d8660a164d4f6bf7d66b032ea535cf +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Tue Jan 15 14:02:49 2008 -0600 + + ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit 777d1abd9796f1c2e148417cc10657e847d318ce +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Tue Jan 15 14:00:25 2008 -0600 + + ColdFire: Add MCF547x_8x FEC driver + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit 72f56adc0b25d43875ad067bae6be1bcea86b79f +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Tue Jan 15 13:54:09 2008 -0600 + + ColdFire: Add MCF547x_8x dma code and header files + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87 +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Tue Jan 15 13:52:03 2008 -0600 + + ColdFire: Add MCF547x_8x dma code - 2 + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Tue Jan 15 13:48:52 2008 -0600 + + ColdFire: Add MCF547x_8x dma code - 1 + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3 +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Tue Jan 15 13:39:44 2008 -0600 + + ColdFire: Add MCF547x_8x related header files + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5 +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Tue Jan 15 13:37:34 2008 -0600 + + ColdFire: Add MCF547x_8x cpu arch + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit e2756f4b54aba0e0523b81dd145666829cf7fd59 +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Mon Jan 14 17:47:23 2008 -0600 + + ColdFire: Add MCF5227x cpu and M52277EVB support-3 + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit c87581027994c148131b2f11aa75501f782ec19a +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Mon Jan 14 17:46:19 2008 -0600 + + ColdFire: Add MCF5227x cpu and MCF52277EVB support-2 + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit 1552af70ecab11b9f3dceff7528ed15faf678b9d +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Mon Jan 14 17:43:33 2008 -0600 + + ColdFire: Add MCF5227x cpu and M52277EVB support-1 + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit 397b7b81a1f1008798ae1206913508cc89cb3a7d +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Mon Jan 14 17:35:44 2008 -0600 + + ColdFire: Fix CFI Flash low level Read/Write macro + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit aa5f1f9dc815a76f6dffb580798599c028fe7feb +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Mon Jan 14 17:23:08 2008 -0600 + + ColdFire: Add M5373EVB platform support - 2 + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit 1ac559d4aa358f63b48c62b564224c06feeb4e36 +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Mon Jan 14 17:19:54 2008 -0600 + + ColdFire: Add M5373EVB platform support - 1 + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit 320d61991fa3190ee41765601ed017b6b5ff7b2b +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Mon Jan 14 17:17:03 2008 -0600 + + ColdFire: Update FlexBus CS for MCF532x + + Definition update and change from 16bit to 32bit + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit 2e72ad0644b940817a89a3590ce0d7b99c05c396 +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Mon Jan 14 17:11:47 2008 -0600 + + ColdFire: PCI and misc updates for MCF5445x + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Mon Jan 14 17:06:55 2008 -0600 + + ColdFire: MCF5445x header files cleanup + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit d9aae6260993a93f7fcf13abff85a601f4f50ea7 +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Mon Jan 14 16:59:42 2008 -0600 + + ColdFire: MCF532x header files cleanup + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + Signed-off by: John Rigby <jrigby@freescale.com> + +commit 7af7751d047e74b2ec58400f97b879c56446b3e8 +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Mon Jan 14 15:30:15 2008 -0600 + + ColdFire: Add modules header files + + Add CF specific modules header files + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Signed-off-by: John Rigby <jrigby@freescale.com> + +commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Thu Jan 17 12:48:00 2008 -0600 + + codingstyle cleanup for spi driver + + ..and rm unused CONFIG_FSL_SPI define + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit d59feffb42c9f174116db7a82a311df98983dfce +Author: Haiying Wang <Haiying.Wang@freescale.com> +Date: Wed Jan 16 17:12:12 2008 -0500 + + FSL: Fix common EEPROM_data structure definition + + - Fix EEPROM_data structure definition according to System EEPROM Data Format. + - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to + bd->bi_ethaddr. + + Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> + +commit 6bee764bd6da510a4aad614880300c968bc7318d +Author: Timur Tabi <timur@freescale.com> +Date: Wed Jan 16 15:48:12 2008 -0600 + + 86xx: enable command-line editing + + Enable command-line editing for all MPC86xx boards. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit 80ddd22626d321a772ebfba304eb7830cb4f6bac +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Wed Jan 16 22:37:42 2008 -0500 + + Implement hard SPI driver on MPC8349EMDS + + This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board. + This board has an ST M25P40 4Mbit EEPROM on its SPI bus + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Wed Jan 16 22:37:35 2008 -0500 + + Add support for a Freescale non-CPM SPI controller + + This patch adds support for the SPI controller found on Freescale PowerPC + processors such as the MCP834x family. Additionally, a new config option, + CONFIG_HARD_SPI, is added for general purpose SPI controller use. + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit a8cb43a89be6cfd283257a603dd9841503ccce0f +Author: Dave Liu <r63238@freescale.com> +Date: Thu Jan 17 18:23:19 2008 +0800 + + mpc83xx: Fix the fatal conflict of merge + + The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7 + will cause the mpc8315erdb board can't boot up. + + The patch fix that bug, and remove the duplicated #ifdef + CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for + MPC8313E processor. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 3259eeaa4148125a81417477f62c05bd67f60587 +Author: Larry Johnson <lrj@acm.org> +Date: Thu Jan 17 08:50:09 2008 -0500 + + Merge Sequoia beautification into Korat code + + Signed-off-by: Larry Johnson <lrj@acm.org> + +commit e16925773211291b562e77187061e9dd1d757217 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Thu Jan 17 07:45:05 2008 +0100 + + net: add 'ethrotate' environment variable + + [PATCH] net: add 'ethrotate' environment variable + + This patch replaces the buildtime configuration option + CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime + configuration veriable. See README. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f +Author: Stefan Roese <sr@denx.de> +Date: Thu Jan 17 14:29:04 2008 +0100 + + ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5 + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 055606bd25e88c0cd04ad348a679a04b1b616bee +Author: Niklaus Giger <niklaus.giger@netstal.com> +Date: Wed Jan 16 18:39:20 2008 +0100 + + ppc4xx: Netstal HCU4 board: added various fixes and POST + + - Moved some common code to netstal/common/nm_bsp.c. + - sdram initialisation goes go netstal/common/fixed_sdram.c. + - Added support for POST. + - Stylistic cleanups (multi-line comments/ enforce 80 colomn width) + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 69b0634a4ee98c9791815600d43b99f626a952f3 +Author: Niklaus Giger <niklaus.giger@netstal.com> +Date: Thu Jan 17 12:53:56 2008 +0100 + + ppc4xx: netstal/common define routines used by all boards + + Added some routines used by all Netstal boards: + - nm_bsp.c: - nm_show_print and + - common_misc_init_r + - set_params_for_sw_install. Very specific code to handle our SW + installation procedure + - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards + to handle sdram initialization. + - nm.h: Common header + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8 +Author: Niklaus Giger <niklaus.giger@netstal.com> +Date: Wed Jan 16 18:39:18 2008 +0100 + + ppc4xx: Netstal HCU5 board: added various fixes and POST + + - Moved some common code to nestal/common/nm_bsp.c. + - Added support for the vxWorks EDR. + - Enable trace for Lauterbach, if present. + - Added support for POST. + - Stylistic cleanups (multi-line comments/ enforce 80 colomn width) + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 4371090e5da77edc7bf9f296364db4801639d9c4 +Author: Niklaus Giger <niklaus.giger@netstal.com> +Date: Wed Jan 16 18:39:08 2008 +0100 + + ppc4xx: Netstal HCU5 board. Added POST. Various fixes + + - Various fixes + - Reduced rom_size from 384 to 320 kB + - Environment is now in flash + - Added POST + - Support for OF + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7 +Author: Niklaus Giger <niklaus.giger@netstal.com> +Date: Wed Jan 16 18:37:50 2008 +0100 + + ppc4xx: Netstal HCU4 board. Added POST. Various fixes + + - Various fixes + - Reduced rom_size from 384 to 320 kB + - Environment is now in flash + - Added POST + - Support for OF + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 1a3ac86b79fcb690275c85861c8efa6a3899060a +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Thu Jan 17 10:53:08 2008 +0100 + + ppc4xx: Complete DU440 board support + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Thu Jan 17 10:52:30 2008 +0100 + + ppc4xx: Add DU440 board support + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 334e442e6fac59be91244063e9b3f6ca25e8daf8 +Author: Grzegorz Bernacki <gjb@semihalf.com> +Date: Wed Jan 16 15:12:47 2008 +0100 + + Set ips dividor to 1/4 of csb clock. + + Previous setting cause ips clock to be out of spec. This bug was found by John + Rigby from Freescale. + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + +commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 17 02:19:18 2008 -0600 + + 85xx: Get ride of old TLB setup code + + Now that all boards have been converted, remove old config code and the + config option for the new style. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3b558e26a5ef31635787d6d6e97d70939d4f892d +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 17 02:02:10 2008 -0600 + + 85xx: Convert TQM85xx to new TLB setup + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 74121b470c14f7eaf284ee838bffca6f9521069e +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 17 01:56:32 2008 -0600 + + 85xx: Convert STXGP3 & STXSSA to new TLB setup + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 17 01:44:34 2008 -0600 + + 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 818218bac6a11591e2542c344d2330e0f4e1968b +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 17 01:31:34 2008 -0600 + + 85xx: Convert PM854/PM856 to new TLB setup + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 17 01:25:33 2008 -0600 + + 85xx: Convert MPC8540EVAL to new TLB setup + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 73aa9ac2b46f1cfd039106ebd6b9865016005234 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 17 01:12:22 2008 -0600 + + 85xx: Convert MPC8568 MDS to new TLB setup + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 0db37dc2eed30884db2daa24dbd9a113b5d00610 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 17 01:01:09 2008 -0600 + + 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 17 00:52:29 2008 -0600 + + 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 17 00:32:17 2008 -0600 + + 85xx: Convert ATUM8548 to new TLB setup + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 16 23:11:57 2008 -0600 + + 85xx: Convert MPC8544 DS to new TLB setup + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 16 22:38:34 2008 -0600 + + 85xx: Reworked initial processor init + + Reworked the initial processor initialzation sequence: + * introduced cpu_early_init_f that is run in address space 1 (AS=1) + * Moved TLB/LAW and CCSR init into cpu_early_init_f() + * Reworked initial asm code to do most of the core init before TLBs + + The main reasons for these changes are to allow handling of 36-bit phys + addresses in the future and some of the issues that will exist when we + do that. + + There are a few caveats on what can be initialized via the LAW and TLB + static tables: + * TLB entry 14/15 can't be initialized via the TLB table + * any LAW that covers the implicit boot window (4G-8M to 4G) must map to + the code that is currently executing. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 44a23cfd6360a68eaa41f945190618a55519eac3 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 16 22:33:22 2008 -0600 + + 85xx: Introduce new tlb API + + Add a set of functions to manipulate TLB entries: + * set_tlb() - write a tlb entry + * invalidate_tlb() - invalidate a tlb array + * disable_tlb() - disable a variable size tlb entry + * init_tlbs() - setup initial tlbs based on static table + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit be88b1699863c262818f3af7f60173b4d48df8fc +Author: Stefan Roese <sr@denx.de> +Date: Thu Jan 17 07:50:17 2008 +0100 + + ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit c8c41d4a80b1a8ad5984a287d81ea780496259f8 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 16 10:04:42 2008 -0600 + + 85xx: Use proper defines for PCI addresses + + We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE. + While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only + be used for configuring the PCI ATMU. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 54a5070115eff38e9b324b78abdfa0b4520580b9 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 16 09:22:29 2008 -0600 + + 85xx: Remove old style of LAW init + + All boards are now using the new fsl_law code so we can drop the old version. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 16 09:15:29 2008 -0600 + + 85xx: convert remaining 85xx boards over to use new LAW init code + + Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over + to use new LAW init code. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 572b13afc42710f2957c382a710360429c0e099b +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 16 09:11:53 2008 -0600 + + 85xx: convert STXGP3/STXSSA over to use new LAW init code + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 45f2166ac0233a9263058378f39612bd11f61196 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 16 09:06:48 2008 -0600 + + 85xx: convert PM854/PM856 over to use new LAW init code + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 16 09:05:27 2008 -0600 + + 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 16 01:45:10 2008 -0600 + + 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 16 01:32:06 2008 -0600 + + 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 16 01:16:16 2008 -0600 + + 85xx: convert MPC8544 DS over to use new LAW init code + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 83d40dfd79fe868796275802f60116d84b9e4395 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 16 01:13:58 2008 -0600 + + 85xx: Move LAW init code into C + + Move the initialization of the LAWs into C code and provide an API + to allow modification of LAWs after init. + + Board code is responsible to provide a law_table and num_law_entries. + + We should be able to use the same code on 86xx as well. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Jan 11 00:01:37 2008 +0100 + + Fix nfs command help to reflect that the serverip is optional + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Mon Dec 10 22:32:14 2007 +0100 + + bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr + + and move is_valid_ether_addr board file + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit c2f896b8fc4722e36915903e1942e138e68ce804 +Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> +Date: Wed Jan 16 16:13:31 2008 +0900 + + drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status). + + rx_status on the memory is basically in LE, but needs to be handled in CPU + endian. le32_to_cpu() takes up this mission. Even if on the sane hardware, + it'll work fine. + + Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> + Cc: Masami Komiya <mkomiya@sonare.it> + Cc: Lucas Jin <lucasjin@gmail.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 96a236746fe6a7b84802afb4ed31536696d34812 +Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> +Date: Wed Jan 16 16:12:26 2008 +0900 + + drivers/net/rtl8139.c: Fix cache coherency issues + + Current driver is meant for cache coherent systems. This patch adds + flush_cache() routines to support cache non-coherent systems. + + Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> + Cc: Masami Komiya <mkomiya@sonare.it> + Cc: Lucas Jin <lucasjin@gmail.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit d1276c76c1e2b5035296689280ba1acb2c425104 +Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> +Date: Wed Jan 16 16:11:14 2008 +0900 + + drivers/net/rtl8139.c: Fix tx timeout + + "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it + does, the condition "(currticks() < to)" becomes invalid and immediately + leads to tx timeout error. This patch introduces the fine-graded udely(10) + loops to ease the impact of wrapping around. + + Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> + Cc: Masami Komiya <mkomiya@sonare.it> + Cc: Lucas Jin <lucasjin@gmail.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a +Author: Dave Liu <r63238@freescale.com> +Date: Fri Jan 11 18:45:28 2008 +0800 + + TSEC: Add the support for RealTek RTL8211B PHY + + Add the support of RealTek RTL8211B PHY, the RTL8211B + PHY only supports RGMII and MII mode. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 84a3047b72b70e862b0b7a8e2058077457f89a32 +Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> +Date: Wed Jan 16 09:40:41 2008 +0100 + + Remove annoying debug printout for PHY less boards. + + PHY less board prints out lots of "read wrong ...": + read wrong value : mii_id 3,mii_reg 2, base e0102320 + read wrong value : mii_id 3,mii_reg 3, base e0102320 + UEC: PHY is Generic MII (ffffffff) + read wrong value : mii_id 3,mii_reg 4, base e0102320 + read wrong value : mii_id 3,mii_reg 0, base e0102320 + read wrong value : mii_id 3,mii_reg 1, base e0102320 + read wrong value : mii_id 3,mii_reg 1, base e0102320 + read wrong value : mii_id 3,mii_reg 5, base e0102320 + read wrong value : mii_id 3,mii_reg 1, base e0102320 + read wrong value : mii_id 3,mii_reg 1, base e0102320 + read wrong value : mii_id 3,mii_reg 5, base e0102320 + FSL UEC0: Full Duplex + FSL UEC0: Speed 100BT + FSL UEC0: Link is up + Using FSL UEC0 device + + Make this printout depend on UEC_VERBOSE_DEBUG and + remove its definition in uec_phy.c + + Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jan 15 14:11:00 2008 -0600 + + net: reduce boot latency on QE UEC based boards + + actually polling for PHY autonegotiation to finish enables us to remove the + 5 second boot prompt latency present on QE based boards. + + call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from + uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait + code shamelessly stolen from tsec driver. + + also rm unused CONFIG_RMII_MODE code. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3 +Author: michael.firth@bt.com <michael.firth@bt.com> +Date: Wed Jan 16 11:40:51 2008 +0000 + + TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus + + The current TSEC driver limits MDIO access to the devices that have been configured as attached + to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands. + + Signed-off-by: Michael Firth <michael.firth@bt.com> + Acked-by: Andy Fleming <afleming@freescale.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Jan 16 00:38:05 2008 -0600 + + Add support for the MPC837xERDB + + MPC837xERDB board support includes: + * DDR2 330MHz hardcoded (soldered on the board) + * Local Bus NOR Flash + * I2C, UART and RTC + * eTSEC RGMII (TSEC0 - RTL8211B with MII; + * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware + * load) + + Signed-off-by: Kevin Lam <kevin.lam@freescale.com> + Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Jan 16 12:06:16 2008 -0600 + + mpc83xx: add support for more system clock performance controls + + System registers that are modified are the Arbiter Configuration + Register (ACR), the System Priority Control Register (SPCR), and the + System Clock Configuration Register (SCCR). + + Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com> + Signed-off by: Joe D'Abbraccio <ljd015@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 16c3cde050e2d243e62b37486f1558570787beb8 +Author: James Yang <james.yang@freescale.com> +Date: Wed Jan 16 11:58:08 2008 -0600 + + FSL: Generalize PIXIS reset command parsing. + + Before, the order of arguments to the pixis_reset + command needed to be supplied in a hard-coded order. + Generalize the command parsing to allow any order. + + Signed-off-by: James Yang <james.yang@freescale.com> + Acked-by: Jon Loeliger <jdl@freescale.com> + +commit ad8f8687b78c3e917b173f038926695383c55555 +Author: Jon Loeliger <jdl@freescale.com> +Date: Tue Jan 15 13:42:41 2008 -0600 + + FSL: Convert board/freescale/common/Makefile to use CONFIG_ + + Convert the board/freescale/common/Makefile to use + CONFIG_* options to select which files to conditionally + compile into the board/freescale/common library rather + than conditionally compiling entire files. + + Now handles:: + CONFIG_FSL_PIXIS + CONFIG_FSL_DIU_FB + CONFIG_PQ_MDS_PIB + + CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 7c2221eb230372a9e537c4f6636b147b0909325f +Author: Roy Zang <tie-fei.zang@freescale.com> +Date: Tue Jan 15 16:38:38 2008 +0800 + + Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver + + Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver. + Remove unused ethernet CONFIG_ options. + + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + Acked-by: Jon Loeliger <jdl@freescale.com> + +commit 711a7946277d2e29af481011e8635e9975c54e45 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jan 15 14:05:14 2008 -0600 + + mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value + + continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601 + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 363eea9ff7f19a2cba17f262bd17559f166e134e +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jan 15 09:51:12 2008 -0600 + + mpc83xx: clean up mpc8360emds.c warnings + + mpc8360emds.c: In function 'ft_board_setup': + mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast + mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast + mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast + mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast + mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast + mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit f09880ea72a1c806db223ce594c5fb1b6542ff6a +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Mon Jan 14 16:14:46 2008 -0600 + + mpc83xx: fix phy-connection-type fixup code + + use tree passed to us in local blob, not global fdt. + + Also use fdt_path_offset to convert to relative offset, since absolute + reference is needed to check for rgmii-id mode string value. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 2b4c952be7c4357a13e839d48df80853820c33eb +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Jan 14 09:01:40 2008 -0600 + + mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s) + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit e1d8ed2c08da14b168658cc5fa78529d461aea70 +Author: Poonam Aggrwal <b10812@freescale.com> +Date: Mon Jan 14 09:41:14 2008 +0530 + + Changes in uboot DDR configuration for MPC8313eRDB + + These changes were identified by HighSmith Bill ,Mazzyar and Joseph for + DDR configuration in u-boot code. Some are related to performance, some + affect stability and some correct few basic errors in the current + configuration. + + The changes have been tested and found to give better memory latency + figures on MPC8313eRDB.LMBench figures prove it. + + The changes are: + + - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0 + (this may improve performance for application with many read + or write to open pages). + - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to + 001 (activating all the CS when only one is used may cause + unwanted noise on the system) + + - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on + Tras=45ns) + - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks. + + - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to + comply with the 3 ODT clk requirements) + - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4. + - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks. + + - DDR_SDRAM_MODE[AL]changed from 0 to 1. + - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks. + + - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510. + - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500. + + The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git + The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf + + Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com> + Cc: Bill HighSmith <Bill.Highsmith@freescale.com> + Cc: Razzaz Mazyar <MRazzaz@freescale.com> + Cc: Josep P J <PJ.Joseph@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95 +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Sat Jan 12 13:24:14 2008 -0500 + + Enable the isdram command on the MPC8360EMDS board + + The isdram command prints out decoded information the "serial presence + detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when + debugging memory configuration problems. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 8bd522ce4afda3d4868ee8c913f5394094326be1 +Author: Dave Liu <r63238@freescale.com> +Date: Fri Jan 11 18:48:24 2008 +0800 + + mpc83xx: Add the support for MPC8315ERDB board + + The features list: + - Boot from NOR Flash + - DDR2 266MHz hardcoded configuration + - Local bus NOR Flash R/W operation + - I2C, UART, MII and RTC + - eTSEC0/1 support + - PCI host + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit b05884efa614e4d8a9413158fc228e0dc02ab704 +Author: Dave Liu <r63238@freescale.com> +Date: Fri Jan 11 18:46:50 2008 +0800 + + mpc83xx: Add config of eTSEC emergency priority in SPCR + + The TSEC emergency priority definition of 831x/837x + is different than the definition of 834x in SPCR register. + + Add the other config of TSEC emergency priority into + cpu_init.c + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 9b958234b0783f13d92f007f753fd2c3ae2c8680 +Author: Dave Liu <r63238@freescale.com> +Date: Fri Jan 11 18:42:19 2008 +0800 + + mpc83xx: Remove cache config from MPC8360ERDK.h + + The MPC8360ERDK board support patch is added before + the commit 2c5b48fc205c3e2752910da8f39209ed075929e5 + so, miss clean up it. + + The patch clean up the miss cache config. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit cd9d23053d435c08fc8695017b5cb9003fcda786 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Jan 14 23:09:32 2008 +0300 + + nand: FSL UPM NAND driver + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 6cb2239ae76faee64434286c4f8fc71374702dd2 +Author: Kyungmin Park <kmpark@infradead.org> +Date: Tue Jan 15 08:59:44 2008 +0900 + + OneNAND: Separate U-Boot dependent code from OneNAND + + OneNAND: Separate U-Boot dependent code from OneNAND + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Wed Jan 16 10:33:46 2008 +0100 + + ppc4xx: Sequoia coding style cleanup and beautification + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 4b3cc6ece9c455504cf12909fae38d085d848ac0 +Author: Larry Johnson <lrj@acm.org> +Date: Tue Jan 15 14:35:58 2008 -0500 + + ppc4xx: Refactor ECC POST for AMCC Denali core + + The ECC POST reported intermittent failures running after power-up on + the Korat PPC440EPx board. Even when the test passed, the debugging + output occasionally reported additional unexpected ECC errors. + + This refactoring has three main objectives: (1) minimize the code + executed with ECC enabled during the tests, (2) add more checking of the + results so any unexpected ECC errors would cause the test to fail, and + (3) use synchronization (only) where required by the processor. + + Signed-off-by: Larry Johnson <lrj@acm.org> + +commit 2465665b73ac2f688af945b1ed510752afa816a4 +Author: David Saada <David.Saada@ecitele.com> +Date: Tue Jan 15 10:40:24 2008 +0200 + + QE UEC: Extend number of supported UECs to 4 + + This patch extends the number of supported UECs to 4. Note that the + problem of QE thread resources exhaustion is resolved by setting the + correct number of QE threads according to Ethernet type (GBE or FE). + + Signed-off-by: David Saada <david.saada@ecitele.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 58d204256cb1ce1bd323847d9f644acf70a72e6a +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jan 16 00:01:01 2008 +0100 + + LWMON5: enable hush shell as command line parser + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 66ffb1883feedddc813d8a507d060f2a940eb2b2 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Jan 15 17:22:28 2008 +0100 + + ADS5121: disable watchdog; enable image timestamps + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 2b4f778fe9d1de61d7445bae7b325340aba6968d +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Jan 15 17:21:28 2008 +0100 + + TK885D: fixes for bigger flash sector sizes on new modules; + adjust default environment; + disable SCC ethernet (not used on this board). + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Tue Jan 15 17:48:13 2008 +0900 + + pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 76e49aa7fb8e76cc49092c1acd53fff921e26360 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Tue Jan 15 23:25:25 2008 +0900 + + sh: Add support SH7710/SH7712 + + SH7710/SH7712 of SH3 CPU are supported. + SH771X is called SH-Ether, and has the Ether controller in CPU. + The driver of Ether is not included in this patch. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 63a11be68306870e04d3851ed9fa41955cdf4894 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Tue Jan 15 23:06:17 2008 +0900 + + sh: Add support of map_physmem() and unmap_physmem() to SuperH + + This patch add the support of map_physmem() and unmap_physmem() + used with Common Flash Interface(CFI) driver. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit db3995fe5164ac5d630b7ecb96286a9828dfbb54 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Wed Jan 9 14:42:27 2008 +0900 + + sh: Add maintainer of MS7720SE to the MAINTAINER file + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Wed Jan 9 14:39:58 2008 +0900 + + sh: Fix board name in MS7720SE's config.mk + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit c0a04d93734d768b39dbb72fb501b65614c8615d +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Wed Jan 9 14:37:36 2008 +0900 + + sh: Add MS7720SE to MAKEALL + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae +Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +Date: Mon Dec 3 22:58:50 2007 +0900 + + sh: Add support for MS7720RP02 board + + Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed +Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +Date: Wed Jan 9 14:30:02 2008 +0900 + + sh: Add support for SH7720 in serial_sh driver. + + Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403 +Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +Date: Mon Dec 3 22:58:45 2007 +0900 + + sh: Add support SH3 and SH7720 + + Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd +Author: Stefan Roese <sr@denx.de> +Date: Tue Jan 15 10:11:02 2008 +0100 + + ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 17bef68097ab3692500a36fb31115bff7910aa99 +Author: Niklaus Giger <niklausgiger@gmx.ch> +Date: Mon Jan 14 14:04:42 2008 +0100 + + ppc_4xx: Fix post spr.c for PPC405 + + post/cpu/ppc4xx/spr.c contained a few checks for registers only present + for PPC440 and derivates processor. + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 06c428bcd4413014b43236e77765022071424fa6 +Author: Dave Liu <r63238@freescale.com> +Date: Mon Jan 14 11:12:01 2008 +0800 + + QE: fix compile warning + + qe.c: In function 'qe_upload_firmware': + qe.c:390: warning: pointer targets in passing argument 2 + uec.c: In function 'uec_initialize': + uec.c:1236: warning: 'uec_info' may be used uninitialized + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit a0dd99d51efa55fe023e19c97ead92683725eb11 +Author: Stefan Roese <sr@denx.de> +Date: Mon Jan 14 10:05:05 2008 +0100 + + ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit + + Now that bit 29 is the USB PHY reset bit, update the Kilauea port + to remove the USB PHY reset after powerup. The CPLD will keep the + USB PHY in reset (active low) until the bit is set to 1 in + board_early_init_f(). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f43ad53908f1ea83a7c26c3505bbe84382e47aad +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jan 13 23:26:45 2008 +0100 + + ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 8d103071b7b0e3ec888859bfcb9d422565e6d750 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jan 13 23:37:50 2008 +0100 + + ADS5121: Fix typo in ads5121.c, adjust default environment + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 51b67d06faa670c65de6f29ec5b5aace74b2a047 +Author: John Rigby <jrigby@freescale.com> +Date: Fri Aug 24 18:18:43 2007 -0600 + + ADS5121: MAX slew rate for PATA pins + + Signed-off-by: John Rigby <jrigby@freescale.com> + +commit dd531aac34aaad138f16cacdb51d61908d59c0e2 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jan 13 21:05:52 2008 +0100 + + Fix Makefile dependency problem with parallel builds. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 89967841e3ea02e3d0e5e1295ab687576e5b1089 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jan 13 19:51:39 2008 +0100 + + MPC8544DS: fix board Makefile for silent build (with -s) + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jan 13 16:44:08 2008 +0100 + + PMC440 board: fix board Makefile for out-of-tree building + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jan 13 16:07:44 2008 +0100 + + Makalu: fix compile warning + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sun Jan 13 12:36:12 2008 +0100 + + cmd_nand : fix compiler warning. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 8225d1e3ac0ab147cdde4b0042812583380afb8a +Author: Michael Schwingen <rincewind@discworld.dascon.de> +Date: Sat Jan 12 20:29:47 2008 +0100 + + CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation + + Signed-off-by: Michael Schwingen <michael@schwingen.org> + Acked-by: Stefan Roese <sr@denx.de> + +commit 2b2f43ed6a30ece77f76191c845ac95267daa31a +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jan 13 02:19:44 2008 +0100 + + MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jan 13 02:19:13 2008 +0100 + + MPC8xx FEC driver: fix compiler warning. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jan 13 00:59:21 2008 +0100 + + Fix Makefile dependencies issues; allow silent build + + - get rid of "version" target whichdidn't really work + - make autoconf.mk depend on version_autogenerated.h to make sure + to rebuild files as needed + - add XECHO macro to allow for silent build using "make -s" + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit e343ab83d5135b558aa58db9be8fc7faa68d77ed +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jan 13 00:55:47 2008 +0100 + + ADS5121e: fix compile warning + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit f2b6f4610627fe3d607620e25082916a01538875 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Jan 13 00:55:18 2008 +0100 + + MUNICes: fix board Makefile for remote build directory + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a +Author: Oliver Weber <almoeli@gmx.de> +Date: Wed Jan 9 17:04:38 2008 +0100 + + MPC5200: don't use hardcoded MBAR address in Bestcomm firmware + + Signed-off-by: Oliver Weber <almoeli@gmx.de> + +commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f +Author: Andreas Engel <andreas.engel@ericsson.com> +Date: Wed Jan 9 17:10:56 2008 +0100 + + Make bootretry work when command line editing is enabled + + Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work. + This patch fixes the problem. + + Signed-off-by: Andreas Engel <andreas.engel@ericsson.com> + +commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4 +Author: Larry Johnson <lrj@acm.org> +Date: Fri Jan 11 23:26:18 2008 -0500 + + Refactor code for "i2c sdram" command + + Signed-off-by: Larry Johnson <lrj@acm.org> + +commit 0df6b8446c4721b91ce311548114891130371083 +Author: Larry Johnson <lrj@acm.org> +Date: Thu Jan 10 22:23:39 2008 -0500 + + Fix "i2c sdram" command for DDR2 DIMMs + + Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the + "i2c sdram" command. This patch provides correct alternative + interpretations when DDR2 memory is detected. + + Signed-off-by: Larry Johnson <lrj@acm.org> + +commit 64134f011254123618798ff77c42ba196b2ec485 +Author: Wolfgang Denk <wd@denx.de> +Date: Sat Jan 12 20:31:39 2008 +0100 + + Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections + + With recent toolchain versions, some boards would not build because + or errors like this one (here for ocotea board when building with + ELDK 4.2 beta): + ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] + + For many boards, the .bss section is big enough that it wraps around + at the end of the address space (0xFFFFFFFF), so the problem will not + be visible unless you use a 64 bit tool chain for development. On + some boards however, changes to the code size (due to different + optimizations) we bail out with section overlaps like above. + + The fix is to add the NOLOAD attribute to the .bss and .sbss + sections, telling the linker that .bss does not consume any space in + the image. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 3afac79ec27b91df185f090b31dad9620779f440 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Fri Jan 11 20:42:58 2008 -0600 + + USB: Add Philips 1561 PCI-OHCI ids + (needed for M5475EVB) + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + +commit 5e8def6731cd7bec74bff42a16b139de04010353 +Author: Wolfgang Denk <wd@denx.de> +Date: Sat Jan 12 15:51:34 2008 +0100 + + Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101 + boards. + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 5d49e0e152a8b81cc0602271e8fd259371f559b7 +Author: Grzegorz Bernacki <gjb@semihalf.com> +Date: Fri Jan 11 12:03:43 2008 +0100 + + MPC512X: Cleanup bus clock names. + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + +commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d +Author: Grzegorz Bernacki <gjb@semihalf.com> +Date: Tue Jan 8 17:16:59 2008 +0100 + + MPC512X: Fixed typo in macro name. + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + +commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363 +Author: Grzegorz Bernacki <gjb@semihalf.com> +Date: Tue Jan 8 17:16:15 2008 +0100 + + ads5121: Added support for FDT. + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + +commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719 +Author: Wolfgang Denk <wd@denx.de> +Date: Sat Jan 12 01:05:50 2008 +0100 + + Coding Style cleanup; update CHANGELOG. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit f6db945649e5e9d0c7efe33b507d243cdc86cf03 Author: Heiko Schocher <hs@denx.de> Date: Fri Jan 11 15:15:17 2008 +0100 @@ -1857,6 +3297,17 @@ Date: Wed Jan 2 15:54:45 2008 +0100 Signed-off-by: Wolfgang Denk <wd@denx.de> +commit 47cc23cbe9a669c510183f4f049bf703ef445f3b +Author: Stefan Roese <sr@denx.de> +Date: Wed Jan 2 14:05:37 2008 +0100 + + cfi_flash: Fix bug in flash_isset() to use correct 32bit function + + This bug was detected on the LWMON5 target which has 2 Intel 16bit wide + flash chips connected to a 32bit wide port. + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc Author: Wolfgang Denk <wd@denx.de> Date: Wed Jan 2 12:38:43 2008 +0100 |