summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/amcc/katmai/katmai.c35
-rw-r--r--board/amcc/katmai/katmai.h65
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c375
-rw-r--r--cpu/ppc4xx/start.S43
-rw-r--r--cpu/ppc4xx/tlb.c4
-rw-r--r--include/configs/katmai.h21
-rw-r--r--include/i2c.h8
-rw-r--r--include/ppc440.h6
8 files changed, 377 insertions, 180 deletions
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index 8704925..fbf1a98 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -28,7 +28,6 @@
#include <i2c.h>
#include <asm-ppc/io.h>
-#include "katmai.h"
#include "../cpu/ppc4xx/440spe_pcie.h"
#undef PCIE_ENDPOINT
@@ -40,7 +39,6 @@ void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
int board_early_init_f (void)
{
unsigned long mfr;
- unsigned long pfc;
/*----------------------------------------------------------------------+
* Interrupt controller setup for the Katmai 440SPe Evaluation board.
@@ -228,15 +226,11 @@ int board_early_init_f (void)
mfr &= ~SDR0_MFR_ECS_MASK;
/* mtsdr(sdr_mfr, mfr); */
- /*
- * Setup GPIO signalling per defines in katmai.h
- */
- pfc = PFC0_KATMAI;
- mtsdr(SDR0_PFC0, pfc);
+ mtsdr(SDR0_PFC0, CFG_PFC0);
- out32(GPIO0_OR_ADDR, GPIO_OR_KATMAI);
- out32(GPIO0_ODR_ADDR, GPIO_ODR_KATMAI);
- out32(GPIO0_TCR_ADDR, GPIO_TCR_KATMAI);
+ out32(GPIO0_OR, CFG_GPIO_OR);
+ out32(GPIO0_ODR, CFG_GPIO_ODR);
+ out32(GPIO0_TCR, CFG_GPIO_TCR);
return 0;
}
@@ -378,6 +372,23 @@ int is_pci_host(struct pci_controller *hose)
return 1;
}
+int katmai_pcie_card_present(int port)
+{
+ u32 val;
+
+ val = in32(GPIO0_IR);
+ switch (port) {
+ case 0:
+ return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT0));
+ case 1:
+ return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT1));
+ case 2:
+ return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT2));
+ default:
+ return 0;
+ }
+}
+
static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
void pcie_setup_hoses(void)
@@ -391,6 +402,10 @@ void pcie_setup_hoses(void)
*/
bus = 1;
for (i = 0; i <= 2; i++) {
+ /* Check for katmai card presence */
+ if (!katmai_pcie_card_present(i))
+ continue;
+
#ifdef PCIE_ENDPOINT
if (ppc440spe_init_pcie_endport(i)) {
#else
diff --git a/board/amcc/katmai/katmai.h b/board/amcc/katmai/katmai.h
deleted file mode 100644
index 9d5b793..0000000
--- a/board/amcc/katmai/katmai.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __KATMAI_H_
-#define __KATMAI_H_
-
-/*----------------------------------------------------------------------------
- * XX
- * XXXX XX XXX XXX XXXX
- * XX XX XX XX XX XX
- * XX XXX XX XX XX XX XX
- * XX XX XXXXX XX XX XX
- * XXXX XX XXXX XXXX
- * XXXX
- *
- * The 440SPe provices 32 bits of GPIO. By default all GPIO pins
- * are disabled, and must be explicitly enabled by setting a
- * bit in the SDR0_PFC0 indirect DCR. Each GPIO maps 1-to-1 with the
- * corresponding bit in the SDR0_PFC0 register (note that bit numbers
- * reflect the PowerPC convention where bit 0 is the most-significant
- * bit).
- *
- * Katmai specific:
- * RS232_RX_EN# is held HIGH during reset by hardware, keeping the
- * RS232_CTS, DSR & DCD signals coming from the MAX3411 (U26) in
- * Hi-Z condition. This prevents contention between the MAX3411 (U26)
- * and 74CBTLV3125PG (U2) during reset.
- *
- * RS232_RX_EN# is connected as GPIO pin 30. Once the processor
- * is released from reset, this pin must be configured as an output and
- * then driven high to enable the receive signals from the UART transciever.
- *----------------------------------------------------------------------------*/
-#define GPIO_ENABLE(gpio) (0x80000000 >> (gpio))
-
-#define PFC0_KATMAI GPIO_ENABLE(30)
-#define GPIO_OR_KATMAI GPIO_ENABLE(30) /* Drive all outputs low except GPIO 30 */
-#define GPIO_TCR_KATMAI GPIO_ENABLE(30)
-#define GPIO_ODR_KATMAI 0 /* Disable open drain for all outputs */
-
-#define GPIO0_OR_ADDR (CFG_PERIPHERAL_BASE + 0x700)
-#define GPIO0_TCR_ADDR (CFG_PERIPHERAL_BASE + 0x704)
-#define GPIO0_ODR_ADDR (CFG_PERIPHERAL_BASE + 0x718)
-#define GPIO0_IR_ADDR (CFG_PERIPHERAL_BASE + 0x71C)
-
-#endif /* __KATMAI_H_ */
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index ab42119..35b2315 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -34,6 +34,7 @@
#endif
#include <common.h>
+#include <command.h>
#include <ppc4xx.h>
#include <i2c.h>
#include <asm/io.h>
@@ -43,6 +44,9 @@
#if defined(CONFIG_SPD_EEPROM) && \
(defined(CONFIG_440SP) || defined(CONFIG_440SPE))
+/*-----------------------------------------------------------------------------+
+ * Defines
+ *-----------------------------------------------------------------------------*/
#ifndef TRUE
#define TRUE 1
#endif
@@ -63,17 +67,67 @@
#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
-#if defined(DEBUG)
-static void ppc440sp_sdram_register_dump(void);
-#endif
+#define CMD_NOP (7 << 19)
+#define CMD_PRECHARGE (2 << 19)
+#define CMD_REFRESH (1 << 19)
+#define CMD_EMR (0 << 19)
+#define CMD_READ (5 << 19)
+#define CMD_WRITE (4 << 19)
+
+#define SELECT_MR (0 << 16)
+#define SELECT_EMR (1 << 16)
+#define SELECT_EMR2 (2 << 16)
+#define SELECT_EMR3 (3 << 16)
+
+/* MR */
+#define DLL_RESET 0x00000100
+
+#define WRITE_RECOV_2 (1 << 9)
+#define WRITE_RECOV_3 (2 << 9)
+#define WRITE_RECOV_4 (3 << 9)
+#define WRITE_RECOV_5 (4 << 9)
+#define WRITE_RECOV_6 (5 << 9)
+
+#define BURST_LEN_4 0x00000002
+
+/* EMR */
+#define ODT_0_OHM 0x00000000
+#define ODT_50_OHM 0x00000044
+#define ODT_75_OHM 0x00000004
+#define ODT_150_OHM 0x00000040
+
+#define ODS_FULL 0x00000000
+#define ODS_REDUCED 0x00000002
+
+/* defines for ODT (On Die Termination) of the 440SP(e) DDR2 controller */
+#define ODT_EB0R (0x80000000 >> 8)
+#define ODT_EB0W (0x80000000 >> 7)
+#define CALC_ODT_R(n) (ODT_EB0R << (n << 1))
+#define CALC_ODT_W(n) (ODT_EB0W << (n << 1))
+#define CALC_ODT_RW(n) (CALC_ODT_R(n) | CALC_ODT_W(n))
-/*-----------------------------------------------------------------------------+
- * Defines
- *-----------------------------------------------------------------------------*/
/* Defines for the Read Cycle Delay test */
#define NUMMEMTESTS 8
#define NUMMEMWORDS 8
+#define CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */
+
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
+ * region. Right now the cache should still be disabled in U-Boot because of the
+ * EMAC driver, that need it's buffer descriptor to be located in non cached
+ * memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CFG_ENABLE_SDRAM_CACHE
+#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
+#else
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
+#endif
+
/* Private Structure Definitions */
/* enum only to ease code for cas latency setting */
@@ -89,7 +143,7 @@ typedef enum ddr_cas_id {
* Prototypes
*-----------------------------------------------------------------------------*/
static unsigned long sdram_memsize(void);
-void program_tlb(u32 start, u32 size);
+void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value);
static void get_spd_info(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks);
@@ -114,7 +168,8 @@ static void program_codt(unsigned long *dimm_populated,
static void program_mode(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks,
- ddr_cas_id_t *selected_cas);
+ ddr_cas_id_t *selected_cas,
+ int *write_recovery);
static void program_tr(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks);
@@ -130,22 +185,30 @@ static void program_copt1(unsigned long *dimm_populated,
static void program_initplr(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks,
- ddr_cas_id_t selected_cas);
+ ddr_cas_id_t selected_cas,
+ int write_recovery);
static unsigned long is_ecc_enabled(void);
static void program_ecc(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
+ unsigned long num_dimm_banks,
+ unsigned long tlb_word2_i_value);
static void program_ecc_addr(unsigned long start_address,
- unsigned long num_bytes);
-
+ unsigned long num_bytes,
+ unsigned long tlb_word2_i_value);
+static void program_DQS_calibration(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
static void test(void);
#else
static void DQS_calibration_process(void);
#endif
-static void program_DQS_calibration(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
+#if defined(DEBUG)
+static void ppc440sp_sdram_register_dump(void);
+#endif
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+void dcbz_area(u32 start_address, u32 num_bytes);
+void dflush(void);
static u32 mfdcr_any(u32 dcr)
{
@@ -235,7 +298,7 @@ static unsigned long sdram_memsize(void)
&& ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
&& ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
== (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < MAXBXCF; i++) {
mfsdram(SDRAM_MB0CF + (i << 2), mb0cf);
/* Banks enabled */
if ((mb0cf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
@@ -300,14 +363,15 @@ static unsigned long sdram_memsize(void)
*-----------------------------------------------------------------------------*/
long int initdram(int board_type)
{
+ unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
unsigned char spd0[MAX_SPD_BYTES];
unsigned char spd1[MAX_SPD_BYTES];
unsigned char *dimm_spd[MAXDIMMS];
unsigned long dimm_populated[MAXDIMMS];
- unsigned char iic0_dimm_addr[MAXDIMMS];
unsigned long num_dimm_banks; /* on board dimm banks */
unsigned long val;
ddr_cas_id_t selected_cas;
+ int write_recovery;
unsigned long dram_size = 0;
num_dimm_banks = sizeof(iic0_dimm_addr);
@@ -319,15 +383,9 @@ long int initdram(int board_type)
dimm_spd[1] = spd1;
/*------------------------------------------------------------------
- * Set up an array of iic0 dimm addresses.
- *-----------------------------------------------------------------*/
- iic0_dimm_addr[0] = IIC0_DIMM0_ADDR;
- iic0_dimm_addr[1] = IIC0_DIMM1_ADDR;
-
- /*------------------------------------------------------------------
* Reset the DDR-SDRAM controller.
*-----------------------------------------------------------------*/
- mtsdr(SDR0_SRST, 0x00200000);
+ mtsdr(SDR0_SRST, (0x80000000 >> 10));
mtsdr(SDR0_SRST, 0x00000000);
/*
@@ -399,7 +457,8 @@ long int initdram(int board_type)
/*------------------------------------------------------------------
* Program SDRAM mode register.
*-----------------------------------------------------------------*/
- program_mode(dimm_populated, iic0_dimm_addr, num_dimm_banks, &selected_cas);
+ program_mode(dimm_populated, iic0_dimm_addr, num_dimm_banks,
+ &selected_cas, &write_recovery);
/*------------------------------------------------------------------
* Set the SDRAM Write Data/DM/DQS Clock Timing Reg
@@ -438,7 +497,7 @@ long int initdram(int board_type)
* Program Initialization preload registers.
*-----------------------------------------------------------------*/
program_initplr(dimm_populated, iic0_dimm_addr, num_dimm_banks,
- selected_cas);
+ selected_cas, write_recovery);
/*------------------------------------------------------------------
* Delay to ensure 200usec have elapsed since reset.
@@ -471,19 +530,17 @@ long int initdram(int board_type)
dram_size = sdram_memsize();
/* and program tlb entries for this size (dynamic) */
- program_tlb(0, dram_size);
+ program_tlb(0, dram_size, MY_TLB_WORD2_I_ENABLE);
-#if 1 /* TODO: ECC support will come later */
/*------------------------------------------------------------------
- * If ecc is enabled, initialize the parity bits.
+ * DQS calibration.
*-----------------------------------------------------------------*/
- program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-#endif
+ program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks);
/*------------------------------------------------------------------
- * DQS calibration.
+ * If ecc is enabled, initialize the parity bits.
*-----------------------------------------------------------------*/
- program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+ program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, MY_TLB_WORD2_I_ENABLE);
#ifdef DEBUG
ppc440sp_sdram_register_dump();
@@ -996,8 +1053,8 @@ static void program_codt(unsigned long *dimm_populated,
dimm_type = SDRAM_DDR1;
}
- total_rank += dimm_rank;
- total_dimm ++;
+ total_rank += dimm_rank;
+ total_dimm++;
if ((dimm_num == 0) && (total_dimm == 1))
firstSlot = TRUE;
else
@@ -1008,49 +1065,49 @@ static void program_codt(unsigned long *dimm_populated,
codt |= SDRAM_CODT_DQS_1_8_V_DDR2;
if ((total_dimm == 1) && (firstSlot == TRUE)) {
if (total_rank == 1) {
- codt |= 0x00800000;
- modt0 = 0x01000000;
+ codt |= CALC_ODT_R(0);
+ modt0 = CALC_ODT_W(0);
modt1 = 0x00000000;
modt2 = 0x00000000;
modt3 = 0x00000000;
}
if (total_rank == 2) {
- codt |= 0x02800000;
- modt0 = 0x06000000;
- modt1 = 0x01800000;
+ codt |= CALC_ODT_R(0) | CALC_ODT_R(1);
+ modt0 = CALC_ODT_W(0);
+ modt1 = CALC_ODT_W(0);
modt2 = 0x00000000;
modt3 = 0x00000000;
}
- } else {
+ } else if ((total_dimm == 1) && (firstSlot != TRUE)) {
if (total_rank == 1) {
- codt |= 0x00800000;
- modt0 = 0x01000000;
+ codt |= CALC_ODT_R(2);
+ modt0 = 0x00000000;
modt1 = 0x00000000;
- modt2 = 0x00000000;
+ modt2 = CALC_ODT_W(2);
modt3 = 0x00000000;
}
if (total_rank == 2) {
- codt |= 0x02800000;
- modt0 = 0x06000000;
- modt1 = 0x01800000;
- modt2 = 0x00000000;
- modt3 = 0x00000000;
+ codt |= CALC_ODT_R(2) | CALC_ODT_R(3);
+ modt0 = 0x00000000;
+ modt1 = 0x00000000;
+ modt2 = CALC_ODT_W(2);
+ modt3 = CALC_ODT_W(2);
}
}
if (total_dimm == 2) {
if (total_rank == 2) {
- codt |= 0x08800000;
- modt0 = 0x18000000;
+ codt |= CALC_ODT_R(0) | CALC_ODT_R(2);
+ modt0 = CALC_ODT_RW(2);
modt1 = 0x00000000;
- modt2 = 0x01800000;
+ modt2 = CALC_ODT_RW(0);
modt3 = 0x00000000;
}
if (total_rank == 4) {
- codt |= 0x2a800000;
- modt0 = 0x18000000;
- modt1 = 0x18000000;
- modt2 = 0x01800000;
- modt3 = 0x01800000;
+ codt |= CALC_ODT_R(0) | CALC_ODT_R(1) | CALC_ODT_R(2) | CALC_ODT_R(3);
+ modt0 = CALC_ODT_RW(2);
+ modt1 = 0x00000000;
+ modt2 = CALC_ODT_RW(0);
+ modt3 = 0x00000000;
}
}
} else {
@@ -1092,9 +1149,19 @@ static void program_codt(unsigned long *dimm_populated,
static void program_initplr(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks,
- ddr_cas_id_t selected_cas)
+ ddr_cas_id_t selected_cas,
+ int write_recovery)
{
- unsigned long MR_CAS_value = 0;
+ u32 cas = 0;
+ u32 odt = 0;
+ u32 ods = 0;
+ u32 mr;
+ u32 wr;
+ u32 emr;
+ u32 emr2;
+ u32 emr3;
+ int dimm_num;
+ int total_dimm = 0;
/******************************************************
** Assumption: if more than one DIMM, all DIMMs are the same
@@ -1112,41 +1179,90 @@ static void program_initplr(unsigned long *dimm_populated,
mtsdram(SDRAM_INITPLR7, 0x81000062);
} else if ((dimm_populated[0] == SDRAM_DDR2) || (dimm_populated[1] == SDRAM_DDR2)) {
switch (selected_cas) {
- /*
- * The CAS latency is a field of the Mode Reg
- * that need to be set from caller input.
- * CAS bits in Mode Reg are starting at bit 4 at least for the Micron DDR2
- * this is the reason of the shift.
- */
case DDR_CAS_3:
- MR_CAS_value = 3 << 4;
+ cas = 3 << 4;
break;
case DDR_CAS_4:
- MR_CAS_value = 4 << 4;
+ cas = 4 << 4;
break;
case DDR_CAS_5:
- MR_CAS_value = 5 << 4;
+ cas = 5 << 4;
break;
default:
- printf("ERROR: ucode error on selected_cas value %d", (unsigned char)selected_cas);
+ printf("ERROR: ucode error on selected_cas value %d", selected_cas);
hang();
break;
}
- mtsdram(SDRAM_INITPLR0, 0xB5380000); /* NOP */
- mtsdram(SDRAM_INITPLR1, 0x82100400); /* precharge 8 DDR clock cycle */
- mtsdram(SDRAM_INITPLR2, 0x80820000); /* EMR2 */
- mtsdram(SDRAM_INITPLR3, 0x80830000); /* EMR3 */
- mtsdram(SDRAM_INITPLR4, 0x80810000); /* EMR DLL ENABLE */
- mtsdram(SDRAM_INITPLR5, 0x80800502 | MR_CAS_value); /* MR w/ DLL reset */
- mtsdram(SDRAM_INITPLR6, 0x82100400); /* precharge 8 DDR clock cycle */
- mtsdram(SDRAM_INITPLR7, 0x8a080000); /* Refresh 50 DDR clock cycle */
- mtsdram(SDRAM_INITPLR8, 0x8a080000); /* Refresh 50 DDR clock cycle */
- mtsdram(SDRAM_INITPLR9, 0x8a080000); /* Refresh 50 DDR clock cycle */
- mtsdram(SDRAM_INITPLR10, 0x8a080000); /* Refresh 50 DDR clock cycle */
- mtsdram(SDRAM_INITPLR11, 0x80800402 | MR_CAS_value); /* MR w/o DLL reset */
- mtsdram(SDRAM_INITPLR12, 0x80810380); /* EMR OCD Default */
- mtsdram(SDRAM_INITPLR13, 0x80810000); /* EMR OCD Exit */
+#if 0
+ /*
+ * ToDo - Still a problem with the write recovery:
+ * On the Corsair CM2X512-5400C4 module, setting write recovery
+ * in the INITPLR reg to the value calculated in program_mode()
+ * results in not correctly working DDR2 memory (crash after
+ * relocation).
+ *
+ * So for now, set the write recovery to 3. This seems to work
+ * on the Corair module too.
+ *
+ * 2007-03-01, sr
+ */
+ switch (write_recovery) {
+ case 3:
+ wr = WRITE_RECOV_3;
+ break;
+ case 4:
+ wr = WRITE_RECOV_4;
+ break;
+ case 5:
+ wr = WRITE_RECOV_5;
+ break;
+ case 6:
+ wr = WRITE_RECOV_6;
+ break;
+ default:
+ printf("ERROR: write recovery not support (%d)", write_recovery);
+ hang();
+ break;
+ }
+#else
+ wr = WRITE_RECOV_3; /* test-only, see description above */
+#endif
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++)
+ if (dimm_populated[dimm_num] != SDRAM_NONE)
+ total_dimm++;
+ if (total_dimm == 1) {
+ odt = ODT_150_OHM;
+ ods = ODS_FULL;
+ } else if (total_dimm == 2) {
+ odt = ODT_75_OHM;
+ ods = ODS_REDUCED;
+ } else {
+ printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm);
+ hang();
+ }
+
+ mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas;
+ emr = CMD_EMR | SELECT_EMR | odt | ods;
+ emr2 = CMD_EMR | SELECT_EMR2;
+ emr3 = CMD_EMR | SELECT_EMR3;
+ mtsdram(SDRAM_INITPLR0, 0xB5000000 | CMD_NOP); /* NOP */
+ udelay(1000);
+ mtsdram(SDRAM_INITPLR1, 0x82000400 | CMD_PRECHARGE); /* precharge 8 DDR clock cycle */
+ mtsdram(SDRAM_INITPLR2, 0x80800000 | emr2); /* EMR2 */
+ mtsdram(SDRAM_INITPLR3, 0x80800000 | emr3); /* EMR3 */
+ mtsdram(SDRAM_INITPLR4, 0x80800000 | emr); /* EMR DLL ENABLE */
+ mtsdram(SDRAM_INITPLR5, 0x80800000 | mr | DLL_RESET); /* MR w/ DLL reset */
+ udelay(1000);
+ mtsdram(SDRAM_INITPLR6, 0x82000400 | CMD_PRECHARGE); /* precharge 8 DDR clock cycle */
+ mtsdram(SDRAM_INITPLR7, 0x8a000000 | CMD_REFRESH); /* Refresh 50 DDR clock cycle */
+ mtsdram(SDRAM_INITPLR8, 0x8a000000 | CMD_REFRESH); /* Refresh 50 DDR clock cycle */
+ mtsdram(SDRAM_INITPLR9, 0x8a000000 | CMD_REFRESH); /* Refresh 50 DDR clock cycle */
+ mtsdram(SDRAM_INITPLR10, 0x8a000000 | CMD_REFRESH); /* Refresh 50 DDR clock cycle */
+ mtsdram(SDRAM_INITPLR11, 0x80000000 | mr); /* MR w/o DLL reset */
+ mtsdram(SDRAM_INITPLR12, 0x80800380 | emr); /* EMR OCD Default */
+ mtsdram(SDRAM_INITPLR13, 0x80800000 | emr); /* EMR OCD Exit */
} else {
printf("ERROR: ucode error as unknown DDR type in program_initplr");
hang();
@@ -1161,7 +1277,8 @@ static void program_initplr(unsigned long *dimm_populated,
static void program_mode(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks,
- ddr_cas_id_t *selected_cas)
+ ddr_cas_id_t *selected_cas,
+ int *write_recovery)
{
unsigned long dimm_num;
unsigned long sdram_ddr1;
@@ -1424,8 +1541,12 @@ static void program_mode(unsigned long *dimm_populated,
mmode |= SDRAM_MMODE_WR_DDR2_6_CYC;
break;
}
+ *write_recovery = t_wr_clk;
}
+ debug("CAS latency = %d\n", *selected_cas);
+ debug("Write recovery = %d\n", *write_recovery);
+
mtsdram(SDRAM_MMODE, mmode);
}
@@ -2017,7 +2138,8 @@ static unsigned long is_ecc_enabled(void)
*-----------------------------------------------------------------------------*/
static void program_ecc(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
+ unsigned long num_dimm_banks,
+ unsigned long tlb_word2_i_value)
{
unsigned long mcopt1;
unsigned long mcopt2;
@@ -2046,23 +2168,59 @@ static void program_ecc(unsigned long *dimm_populated,
&& ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
== (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
- program_ecc_addr(0, sdram_memsize());
+ program_ecc_addr(0, sdram_memsize(), tlb_word2_i_value);
}
}
return;
}
+#ifdef CONFIG_ECC_ERROR_RESET
+/*
+ * Check for ECC errors and reset board upon any error here
+ *
+ * On the Katmai 440SPe eval board, from time to time, the first
+ * lword write access after DDR2 initializazion with ECC checking
+ * enabled, leads to an ECC error. I couldn't find a configuration
+ * without this happening. On my board with the current setup it
+ * happens about 1 from 10 times.
+ *
+ * The ECC modules used for testing are:
+ * - Kingston ValueRAM KVR667D2E5/512 (tested with 1 and 2 DIMM's)
+ *
+ * This has to get fixed for the Katmai and tested for the other
+ * board (440SP/440SPe) that will eventually use this code in the
+ * future.
+ *
+ * 2007-03-01, sr
+ */
+static void check_ecc(void)
+{
+ u32 val;
+
+ mfsdram(SDRAM_ECCCR, val);
+ if (val != 0) {
+ printf("\nECC error: MCIF0_ECCES=%08lx MQ0_ESL=%08lx address=%08lx\n",
+ val, mfdcr(0x4c), mfdcr(0x4e));
+ printf("ECC error occured, resetting board...\n");
+ do_reset(NULL, 0, 0, NULL);
+ }
+}
+#endif
+
/*-----------------------------------------------------------------------------+
* program_ecc_addr.
*-----------------------------------------------------------------------------*/
static void program_ecc_addr(unsigned long start_address,
- unsigned long num_bytes)
+ unsigned long num_bytes,
+ unsigned long tlb_word2_i_value)
{
unsigned long current_address;
unsigned long end_address;
unsigned long address_increment;
unsigned long mcopt1;
+ char str[] = "ECC generation...";
+ int i;
current_address = start_address;
mfsdram(SDRAM_MCOPT1, mcopt1);
@@ -2073,26 +2231,49 @@ static void program_ecc_addr(unsigned long start_address,
eieio();
wait_ddr_idle();
- /* ECC bit set method for non-cached memory */
- if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32)
- address_increment = 4;
- else
- address_increment = 8;
- end_address = current_address + num_bytes;
+ puts(str);
+ if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
+ /* ECC bit set method for non-cached memory */
+ if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32)
+ address_increment = 4;
+ else
+ address_increment = 8;
+ end_address = current_address + num_bytes;
- while (current_address < end_address) {
- *((unsigned long *)current_address) = 0x00000000;
- current_address += address_increment;
+ while (current_address < end_address) {
+ *((unsigned long *)current_address) = 0x00000000;
+ current_address += address_increment;
+ }
+ } else {
+ /* ECC bit set method for cached memory */
+ dcbz_area(start_address, num_bytes);
+ dflush();
}
+ for (i=0; i<strlen(str); i++)
+ putc('\b');
+
sync();
eieio();
wait_ddr_idle();
+ /* clear ECC error repoting registers */
+ mtsdram(SDRAM_ECCCR, 0xffffffff);
+ mtdcr(0x4c, 0xffffffff);
+
mtsdram(SDRAM_MCOPT1,
- (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK);
+ (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP);
sync();
eieio();
wait_ddr_idle();
+
+#ifdef CONFIG_ECC_ERROR_RESET
+ /*
+ * One write to 0 is enough to trigger this ECC error
+ * (see description above)
+ */
+ out_be32(0, 0x12345678);
+ check_ecc();
+#endif
}
}
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 200f7b3..24b30df 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -1912,4 +1912,47 @@ pll_wait:
TLBRE(3,3,0)
blr
function_epilog(mftlb1)
+
+/*----------------------------------------------------------------------------+
+| dcbz_area.
++----------------------------------------------------------------------------*/
+ function_prolog(dcbz_area)
+ rlwinm. r5,r4,0,27,31
+ rlwinm r5,r4,27,5,31
+ beq ..d_ra2
+ addi r5,r5,0x0001
+..d_ra2:mtctr r5
+..d_ag2:dcbz r0,r3
+ addi r3,r3,32
+ bdnz ..d_ag2
+ sync
+ blr
+ function_epilog(dcbz_area)
+
+/*----------------------------------------------------------------------------+
+| dflush. Assume 32K at vector address is cachable.
++----------------------------------------------------------------------------*/
+ function_prolog(dflush)
+ mfmsr r9
+ rlwinm r8,r9,0,15,13
+ rlwinm r8,r8,0,17,15
+ mtmsr r8
+ addi r3,r0,0x0000
+ mtspr dvlim,r3
+ mfspr r3,ivpr
+ addi r4,r0,1024
+ mtctr r4
+..dflush_loop:
+ lwz r6,0x0(r3)
+ addi r3,r3,32
+ bdnz ..dflush_loop
+ addi r3,r3,-32
+ mtctr r4
+..ag: dcbf r0,r3
+ addi r3,r3,-32
+ bdnz ..ag
+ sync
+ mtmsr r9
+ blr
+ function_epilog(dflush)
#endif /* CONFIG_440 */
diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c
index e26e6d4..50344a4 100644
--- a/cpu/ppc4xx/tlb.c
+++ b/cpu/ppc4xx/tlb.c
@@ -166,13 +166,13 @@ static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size,
* Common usage for boards with SDRAM DIMM modules to dynamically
* configure the TLB's for the SDRAM
*/
-void program_tlb(u32 start, u32 size)
+void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value)
{
region_t region_array;
region_array.base = start;
region_array.size = size;
- region_array.tlb_word2_i_value = TLB_WORD2_I_ENABLE; /* disable cache (for now) */
+ region_array.tlb_word2_i_value = tlb_word2_i_value; /* en-/disable cache */
/* Call the routine to add in the tlb entries for the memory regions */
program_tlb_addr(region_array.base, region_array.size,
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index c750e14..f350155 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -107,11 +107,8 @@
* DDR SDRAM
*----------------------------------------------------------------------*/
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
-#define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses */
-#define IIC0_DIMM0_ADDR 0x51
-#define IIC0_DIMM1_ADDR 0x52
+#define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses*/
#undef CONFIG_STRESS
-#undef ENABLE_ECC
/*-----------------------------------------------------------------------
* I2C
@@ -384,6 +381,22 @@
EBC_CFG_PME_DISABLE | \
EBC_CFG_PR_16)
+/*-----------------------------------------------------------------------
+ * GPIO Setup
+ *----------------------------------------------------------------------*/
+#define CFG_GPIO_PCIE_PRESENT0 17
+#define CFG_GPIO_PCIE_PRESENT1 21
+#define CFG_GPIO_PCIE_PRESENT2 23
+#define CFG_GPIO_RS232_FORCEOFF 30
+
+#define CFG_PFC0 (GPIO_VAL(CFG_GPIO_PCIE_PRESENT0) | \
+ GPIO_VAL(CFG_GPIO_PCIE_PRESENT1) | \
+ GPIO_VAL(CFG_GPIO_PCIE_PRESENT2) | \
+ GPIO_VAL(CFG_GPIO_RS232_FORCEOFF))
+#define CFG_GPIO_OR GPIO_VAL(CFG_GPIO_RS232_FORCEOFF)
+#define CFG_GPIO_TCR GPIO_VAL(CFG_GPIO_RS232_FORCEOFF)
+#define CFG_GPIO_ODR 0
+
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
diff --git a/include/i2c.h b/include/i2c.h
index 54c6f9f..d31c72d 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -56,6 +56,14 @@
#define I2C_SET_BUS(a)
#endif
+/* define the I2C bus number for RTC and DTT if not already done */
+#if !defined(CFG_RTC_BUS_NUM)
+#define CFG_RTC_BUS_NUM 0
+#endif
+#if !defined(CFG_DTT_BUS_NUM)
+#define CFG_DTT_BUS_NUM 0
+#endif
+
/*
* Initialization, must be called once on start up, may be called
* repeatedly to change the speed and slave addresses.
diff --git a/include/ppc440.h b/include/ppc440.h
index c24f5b7..1c7f11c 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -3190,7 +3190,8 @@
#define GPIO0 0
#define GPIO1 1
-#if defined(CONFIG_440GP) || defined(CONFIG_440GX)
+#if defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000700)
#define GPIO0_OR (GPIO0_BASE+0x0)
@@ -3275,6 +3276,8 @@
#define GPIO_IN_SEL 0x40000000 /* GPIO_IN value put in GPIO_ISx for the GPIO nb 0 */
/* For the other GPIO number, you must shift */
+#define GPIO_VAL(gpio) (0x80000000 >> (gpio))
+
#ifndef __ASSEMBLY__
typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t;
@@ -3285,7 +3288,6 @@ typedef struct { unsigned long add; /* gpio core base address */
gpio_select_t alt_nb; /* Selected Alternate */
} gpio_param_s;
-
#endif /* __ASSEMBLY__ */
/*