diff options
-rw-r--r-- | board/lwmon5/sdram.c | 2 | ||||
-rw-r--r-- | board/netstal/hcu5/sdram.c | 2 | ||||
-rw-r--r-- | cpu/ppc4xx/44x_spd_ddr2.c | 2 | ||||
-rw-r--r-- | drivers/pci.c | 4 | ||||
-rw-r--r-- | include/configs/TQM85xx.h | 1 | ||||
-rw-r--r-- | include/configs/hcu5.h | 1 | ||||
-rw-r--r-- | include/configs/katmai.h | 1 | ||||
-rw-r--r-- | include/configs/luan.h | 1 | ||||
-rw-r--r-- | include/configs/lwmon5.h | 1 | ||||
-rw-r--r-- | include/configs/p3mx.h | 1 | ||||
-rw-r--r-- | include/configs/yucca.h | 1 | ||||
-rw-r--r-- | lib_ppc/board.c | 11 |
12 files changed, 9 insertions, 19 deletions
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c index f906b85..d4547e2 100644 --- a/board/lwmon5/sdram.c +++ b/board/lwmon5/sdram.c @@ -57,7 +57,6 @@ void dcbz_area(u32 start_address, u32 num_bytes); void dflush(void); -#ifdef CONFIG_ADD_RAM_INFO static u32 is_ecc_enabled(void) { u32 val; @@ -87,7 +86,6 @@ void board_add_ram_info(int use_default) val = DDR0_03_CASLAT_DECODE(val); printf(", CL%d)", val); } -#endif static int wait_for_dlllock(void) { diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index 5d457f7..9ee9ab5 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -70,7 +70,6 @@ void dflush(void); void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); -#ifdef CONFIG_ADD_RAM_INFO void board_add_ram_info(int use_default) { PPC440_SYS_INFO board_cfg; @@ -99,7 +98,6 @@ void board_add_ram_info(int use_default) val = DDR0_03_CASLAT_DECODE(val); printf(", CL%d)", val); } -#endif /*-------------------------------------------------------------------- * wait_for_dlllock. diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 18b90ba..67ba5bd 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -621,7 +621,6 @@ static void get_spd_info(unsigned long *dimm_populated, } } -#ifdef CONFIG_ADD_RAM_INFO void board_add_ram_info(int use_default) { PPC440_SYS_INFO board_cfg; @@ -642,7 +641,6 @@ void board_add_ram_info(int use_default) val = (val & SDRAM_MMODE_DCL_MASK) >> 4; printf(", CL%d)", val); } -#endif /*------------------------------------------------------------------ * For the memory DIMMs installed, this routine verifies that they diff --git a/drivers/pci.c b/drivers/pci.c index 4158919..50ca6b0 100644 --- a/drivers/pci.c +++ b/drivers/pci.c @@ -82,8 +82,10 @@ int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\ { \ u32 val32; \ \ - if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\ + if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) { \ + *val = -1; \ return -1; \ + } \ \ *val = (val32 >> ((offset & (int)off_mask) * 8)); \ \ diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index cb9bf54..9beb0ba 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -94,7 +94,6 @@ */ #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE -#define CONFIG_ADD_RAM_INFO 1 /* print additional info*/ #if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) /* TQM8540 & 8560 need DLL-override */ diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index d0bf251..f95d78e 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -43,7 +43,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 110ad44..b6d0f51 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -42,7 +42,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS /*----------------------------------------------------------------------- diff --git a/include/configs/luan.h b/include/configs/luan.h index 26dbec9..a09dd74 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -39,7 +39,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 604b7d1..7116c49 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -35,7 +35,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 8ae38cb..bec442d 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -60,7 +60,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 9c536fd..906f046 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -46,7 +46,6 @@ #define EXTCLK_83 83333333 #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS #undef CONFIG_STRESS diff --git a/lib_ppc/board.c b/lib_ppc/board.c index c87d46c..9aa67f9 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -209,9 +209,12 @@ static int init_baudrate (void) /***********************************************************************/ -#ifdef CONFIG_ADD_RAM_INFO -void board_add_ram_info(int); -#endif +void __board_add_ram_info(int use_default) +{ + /* please define platform specific board_add_ram_info() */ +} +void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info"))); + static int init_func_ram (void) { @@ -224,9 +227,7 @@ static int init_func_ram (void) if ((gd->ram_size = initdram (board_type)) > 0) { print_size (gd->ram_size, ""); -#ifdef CONFIG_ADD_RAM_INFO board_add_ram_info(0); -#endif putc('\n'); return (0); } |