summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--common/cmd_doc.c4
-rw-r--r--doc/README.nand109
-rw-r--r--drivers/mtd/nand_legacy/nand_legacy.c3
3 files changed, 20 insertions, 96 deletions
diff --git a/common/cmd_doc.c b/common/cmd_doc.c
index e2d4a42..3385c67 100644
--- a/common/cmd_doc.c
+++ b/common/cmd_doc.c
@@ -14,6 +14,10 @@
#include <linux/mtd/nftl.h>
#include <linux/mtd/doc2000.h>
+#error This code is broken and will be removed outright in the next release.
+#error If you need diskonchip support, please update the Linux driver in
+#error drivers/mtd/nand/diskonchip.c to work with u-boot.
+
/*
* ! BROKEN !
*
diff --git a/doc/README.nand b/doc/README.nand
index fc62f92..bb72289 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -98,83 +98,10 @@ Configuration Options:
CONFIG_SYS_MAX_NAND_DEVICE
The maximum number of NAND devices you want to support.
-NAND Interface:
-
- #define NAND_WAIT_READY(nand)
- Wait until the NAND flash is ready. Typically this would be a
- loop waiting for the READY/BUSY line from the flash to indicate it
- it is ready.
-
- #define WRITE_NAND_COMMAND(d, adr)
- Write the command byte `d' to the flash at `adr' with the
- CLE (command latch enable) line true. If your board uses writes to
- different addresses to control CLE and ALE, you can modify `adr'
- to be the appropriate address here. If your board uses I/O registers
- to control them, it is probably better to let NAND_CTL_SETCLE()
- and company do it.
-
- #define WRITE_NAND_ADDRESS(d, adr)
- Write the address byte `d' to the flash at `adr' with the
- ALE (address latch enable) line true. If your board uses writes to
- different addresses to control CLE and ALE, you can modify `adr'
- to be the appropriate address here. If your board uses I/O registers
- to control them, it is probably better to let NAND_CTL_SETALE()
- and company do it.
-
- #define WRITE_NAND(d, adr)
- Write the data byte `d' to the flash at `adr' with the
- ALE and CLE lines false. If your board uses writes to
- different addresses to control CLE and ALE, you can modify `adr'
- to be the appropriate address here. If your board uses I/O registers
- to control them, it is probably better to let NAND_CTL_CLRALE()
- and company do it.
-
- #define READ_NAND(adr)
- Read a data byte from the flash at `adr' with the
- ALE and CLE lines false. If your board uses reads from
- different addresses to control CLE and ALE, you can modify `adr'
- to be the appropriate address here. If your board uses I/O registers
- to control them, it is probably better to let NAND_CTL_CLRALE()
- and company do it.
-
- #define NAND_DISABLE_CE(nand)
- Set CE (Chip Enable) low to enable the NAND flash.
-
- #define NAND_ENABLE_CE(nand)
- Set CE (Chip Enable) high to disable the NAND flash.
-
- #define NAND_CTL_CLRALE(nandptr)
- Set ALE (address latch enable) low. If ALE control is handled by
- WRITE_NAND_ADDRESS() this can be empty.
-
- #define NAND_CTL_SETALE(nandptr)
- Set ALE (address latch enable) high. If ALE control is handled by
- WRITE_NAND_ADDRESS() this can be empty.
-
- #define NAND_CTL_CLRCLE(nandptr)
- Set CLE (command latch enable) low. If CLE control is handled by
- WRITE_NAND_ADDRESS() this can be empty.
-
- #define NAND_CTL_SETCLE(nandptr)
- Set CLE (command latch enable) high. If CLE control is handled by
- WRITE_NAND_ADDRESS() this can be empty.
-
-More Definitions:
-
- These definitions are needed in the board configuration for now, but
- may really belong in a header file.
- TODO: Figure which ones are truly configuration settings and rename
- them to CONFIG_SYS_NAND_... and move the rest somewhere appropriate.
-
- #define SECTORSIZE 512
- #define ADDR_COLUMN 1
- #define ADDR_PAGE 2
- #define ADDR_COLUMN_PAGE 3
- #define NAND_ChipID_UNKNOWN 0x00
- #define NAND_MAX_FLOORS 1
- #define CONFIG_SYS_NAND_MAX_CHIPS 1
-
- #define CONFIG_SYS_DAVINCI_BROKEN_ECC
+ CONFIG_SYS_NAND_MAX_CHIPS
+ The maximum number of NAND chips per device to be supported.
+
+ CONFIG_SYS_DAVINCI_BROKEN_ECC
Versions of U-Boot <= 1.3.3 and Montavista Linux kernels
generated bogus ECCs on large-page NAND. Both large and small page
NAND ECCs were incompatible with the Linux davinci git tree (since
@@ -186,27 +113,17 @@ More Definitions:
NOTE:
=====
-We now use a complete rewrite of the NAND code based on what is in
-2.6.12 Linux kernel.
-
-The old NAND handling code has been re-factored and is now confined
-to only board-specific files and - unfortunately - to the DoC code
-(see below). A new configuration variable has been introduced:
-CONFIG_NAND_LEGACY, which has to be defined in the board config file if
-that board uses legacy code.
-
-The necessary changes have been made to all affected boards, and no
-build breakage has been introduced, except for NETTA and NETTA_ISDN
-targets from MAKEALL. This is due to the fact that these two boards
-use JFFS, which has been adopted to use the new NAND, and at the same
-time use NAND in legacy mode. The breakage will disappear when the
-board-specific code is changed to the new NAND.
+The current NAND implementation is based on what is in recent
+Linux kernels. The old legacy implementation has been disabled,
+and will be removed soon.
-As mentioned above, the legacy code is still used by the DoC subsystem.
-The consequence of this is that the legacy NAND can't be removed from
-the tree until the DoC is ported to use the new NAND support (or boards
-with DoC will break).
+If you have board code which used CONFIG_NAND_LEGACY, you'll need
+to convert to the current NAND interface for it to continue to work.
+The Disk On Chip driver is currently broken and has been for some time.
+There is a driver in drivers/mtd/nand, taken from Linux, that works with
+the current NAND system but has not yet been adapted to the u-boot
+environment.
Additional improvements to the NAND subsystem by Guido Classen, 10-10-2006
diff --git a/drivers/mtd/nand_legacy/nand_legacy.c b/drivers/mtd/nand_legacy/nand_legacy.c
index 441780a..d9ae9c7 100644
--- a/drivers/mtd/nand_legacy/nand_legacy.c
+++ b/drivers/mtd/nand_legacy/nand_legacy.c
@@ -18,6 +18,9 @@
#include <linux/mtd/nand_ids.h>
#include <jffs2/jffs2.h>
+#error Legacy NAND is deprecated. Please convert to the current NAND interface.
+#error This code will be removed outright in the next release.
+
#ifdef CONFIG_OMAP1510
void archflashwp(void *archdata, int wp);
#endif