summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS2
-rwxr-xr-xMAKEALL6
-rw-r--r--Makefile5
-rw-r--r--board/xilinx/microblaze-generic/Makefile (renamed from board/xilinx/ml401/Makefile)0
-rw-r--r--board/xilinx/microblaze-generic/config.mk (renamed from board/xilinx/ml401/config.mk)0
-rw-r--r--board/xilinx/microblaze-generic/microblaze-generic.c (renamed from board/xilinx/ml401/ml401.c)0
-rw-r--r--board/xilinx/microblaze-generic/u-boot.lds (renamed from board/xilinx/ml401/u-boot.lds)0
-rw-r--r--board/xilinx/microblaze-generic/xparameters.h (renamed from board/xilinx/ml401/xparameters.h)2
-rw-r--r--common/cmd_bdinfo.c10
-rw-r--r--common/cmd_nand.c107
-rw-r--r--common/cmd_onenand.c530
-rw-r--r--cpu/microblaze/cache.c3
-rw-r--r--doc/README.nand2
-rw-r--r--drivers/mtd/nand/nand.c2
-rw-r--r--drivers/mtd/nand/nand_base.c2
-rw-r--r--drivers/mtd/nand/nand_util.c91
-rw-r--r--drivers/mtd/nand_legacy/nand_legacy.c2
-rw-r--r--drivers/mtd/onenand/onenand_base.c640
-rw-r--r--drivers/mtd/onenand/onenand_bbt.c8
-rw-r--r--drivers/mtd/onenand/onenand_uboot.c10
-rw-r--r--include/asm-avr32/io.h9
-rw-r--r--include/configs/ASH405.h1
-rw-r--r--include/configs/CATcenter.h1
-rw-r--r--include/configs/CMS700.h1
-rw-r--r--include/configs/DU440.h1
-rw-r--r--include/configs/G2000.h1
-rw-r--r--include/configs/HH405.h1
-rw-r--r--include/configs/HUB405.h1
-rw-r--r--include/configs/IDS8247.h1
-rw-r--r--include/configs/M5329EVB.h1
-rw-r--r--include/configs/M5373EVB.h1
-rw-r--r--include/configs/MPC8313ERDB.h1
-rw-r--r--include/configs/MPC8315ERDB.h11
-rw-r--r--include/configs/MPC8360ERDK.h1
-rw-r--r--include/configs/MPC837XEMDS.h1
-rw-r--r--include/configs/MPC8536DS.h1
-rw-r--r--include/configs/MPC8572DS.h1
-rw-r--r--include/configs/NC650.h1
-rw-r--r--include/configs/NETPHONE.h1
-rw-r--r--include/configs/NETTA.h1
-rw-r--r--include/configs/NETTA2.h1
-rw-r--r--include/configs/NETVIA.h1
-rw-r--r--include/configs/PLU405.h1
-rw-r--r--include/configs/PMC440.h1
-rw-r--r--include/configs/PPChameleonEVB.h2
-rw-r--r--include/configs/SXNI855T.h1
-rw-r--r--include/configs/TQM8272.h1
-rw-r--r--include/configs/TQM85xx.h1
-rw-r--r--include/configs/VCMA9.h1
-rw-r--r--include/configs/VOH405.h1
-rw-r--r--include/configs/WUH405.h1
-rw-r--r--include/configs/acadia.h1
-rw-r--r--include/configs/afeb9260.h1
-rw-r--r--include/configs/alpr.h1
-rw-r--r--include/configs/at91cap9adk.h1
-rw-r--r--include/configs/at91rm9200dk.h1
-rw-r--r--include/configs/at91sam9260ek.h1
-rw-r--r--include/configs/at91sam9261ek.h1
-rw-r--r--include/configs/at91sam9263ek.h1
-rw-r--r--include/configs/at91sam9rlek.h1
-rw-r--r--include/configs/bamboo.h1
-rw-r--r--include/configs/bf537-stamp.h1
-rw-r--r--include/configs/canyonlands.h1
-rw-r--r--include/configs/csb637.h1
-rw-r--r--include/configs/davinci_dvevm.h1
-rw-r--r--include/configs/davinci_schmoogie.h1
-rw-r--r--include/configs/davinci_sffsdr.h1
-rw-r--r--include/configs/davinci_sonata.h1
-rw-r--r--include/configs/delta.h1
-rw-r--r--include/configs/kilauea.h1
-rw-r--r--include/configs/microblaze-generic.h (renamed from include/configs/ml401.h)121
-rw-r--r--include/configs/netstar.h1
-rw-r--r--include/configs/omap2420h4.h1
-rw-r--r--include/configs/pdnb3.h1
-rw-r--r--include/configs/quad100hd.h1
-rw-r--r--include/configs/sbc2410x.h1
-rw-r--r--include/configs/sc3.h1
-rw-r--r--include/configs/sequoia.h1
-rw-r--r--include/configs/smdk6400.h1
-rw-r--r--include/configs/socrates.h1
-rw-r--r--include/configs/stxxtc.h1
-rw-r--r--include/configs/zylonite.h1
-rw-r--r--include/linux/mtd/bbm.h8
-rw-r--r--include/linux/mtd/nand.h9
-rw-r--r--include/linux/mtd/nand_legacy.h5
-rw-r--r--include/linux/mtd/onenand.h45
-rw-r--r--include/linux/mtd/onenand_regs.h1
-rw-r--r--include/nand.h2
-rw-r--r--include/onenand_uboot.h14
-rw-r--r--lib_blackfin/board.c6
-rw-r--r--lib_microblaze/board.c30
-rw-r--r--lib_microblaze/cache.c16
-rw-r--r--nand_spl/board/freescale/mpc8313erdb/Makefile6
-rw-r--r--nand_spl/nand_boot_fsl_elbc.c5
94 files changed, 1224 insertions, 546 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index b774938..fcc2043 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -712,7 +712,7 @@ Yasushi Shoji <yashi@atmark-techno.com>
Michal Simek <monstr@monstr.eu>
- ML401 MicroBlaze
+ microblaze-generic MicroBlaze
#########################################################################
# Coldfire Systems: #
diff --git a/MAKEALL b/MAKEALL
index 1ca5e58..a1a49f7 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -699,9 +699,9 @@ LIST_nios2=" \
## MicroBlaze Systems
#########################################################################
-LIST_microblaze=" \
- ml401 \
- suzaku \
+LIST_microblaze=" \
+ microblaze-generic \
+ suzaku \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 9f69278..eff3379 100644
--- a/Makefile
+++ b/Makefile
@@ -3188,10 +3188,9 @@ PCI5441_config : unconfig
## Microblaze
#========================================================================
-ml401_config: unconfig
+microblaze-generic_config: unconfig
@mkdir -p $(obj)include
- @echo "#define CONFIG_ML401 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
+ @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
suzaku_config: unconfig
@mkdir -p $(obj)include
diff --git a/board/xilinx/ml401/Makefile b/board/xilinx/microblaze-generic/Makefile
index 10b47b2..10b47b2 100644
--- a/board/xilinx/ml401/Makefile
+++ b/board/xilinx/microblaze-generic/Makefile
diff --git a/board/xilinx/ml401/config.mk b/board/xilinx/microblaze-generic/config.mk
index c75daaf..c75daaf 100644
--- a/board/xilinx/ml401/config.mk
+++ b/board/xilinx/microblaze-generic/config.mk
diff --git a/board/xilinx/ml401/ml401.c b/board/xilinx/microblaze-generic/microblaze-generic.c
index f388b77..f388b77 100644
--- a/board/xilinx/ml401/ml401.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
diff --git a/board/xilinx/ml401/u-boot.lds b/board/xilinx/microblaze-generic/u-boot.lds
index b38f648..b38f648 100644
--- a/board/xilinx/ml401/u-boot.lds
+++ b/board/xilinx/microblaze-generic/u-boot.lds
diff --git a/board/xilinx/ml401/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h
index d805061..fae03bf 100644
--- a/board/xilinx/ml401/xparameters.h
+++ b/board/xilinx/microblaze-generic/xparameters.h
@@ -25,6 +25,8 @@
* Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
*/
+#define XILINX_BOARD_NAME microblaze-generic
+
/* System Clock Frequency */
#define XILINX_CLOCK_FREQ 100000000
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 6675241..b660d2a 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -328,18 +328,20 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
#elif defined(CONFIG_BLACKFIN)
+static void print_str(const char *, const char *);
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int i;
bd_t *bd = gd->bd;
+ char buf[32];
printf("U-Boot = %s\n", bd->bi_r_version);
printf("CPU = %s\n", bd->bi_cpu);
printf("Board = %s\n", bd->bi_board_name);
- printf("VCO = %lu MHz\n", bd->bi_vco / 1000000);
- printf("CCLK = %lu MHz\n", bd->bi_cclk / 1000000);
- printf("SCLK = %lu MHz\n", bd->bi_sclk / 1000000);
+ print_str("VCO", strmhz(buf, bd->bi_vco));
+ print_str("CCLK", strmhz(buf, bd->bi_cclk));
+ print_str("SCLK", strmhz(buf, bd->bi_sclk));
print_num("boot_params", (ulong)bd->bi_boot_params);
print_num("memstart", (ulong)bd->bi_memstart);
@@ -430,7 +432,7 @@ static void print_lnum(const char *name, u64 value)
}
#endif
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_BLACKFIN)
static void print_str(const char *name, const char *str)
{
printf ("%-12s= %6s MHz\n", name, str);
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 0a366d3..aedf8a6 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -160,10 +160,51 @@ out:
if (*size == nand->size)
puts("whole chip\n");
else
- printf("offset 0x%lx, size 0x%x\n", *off, *size);
+ printf("offset 0x%lx, size 0x%zx\n", *off, *size);
return 0;
}
+#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
+static void print_status(ulong start, ulong end, ulong erasesize, int status)
+{
+ printf("%08lx - %08lx: %08lx blocks %s%s%s\n",
+ start,
+ end - 1,
+ (end - start) / erasesize,
+ ((status & NAND_LOCK_STATUS_TIGHT) ? "TIGHT " : ""),
+ ((status & NAND_LOCK_STATUS_LOCK) ? "LOCK " : ""),
+ ((status & NAND_LOCK_STATUS_UNLOCK) ? "UNLOCK " : ""));
+}
+
+static void do_nand_status(nand_info_t *nand)
+{
+ ulong block_start = 0;
+ ulong off;
+ int last_status = -1;
+
+ struct nand_chip *nand_chip = nand->priv;
+ /* check the WP bit */
+ nand_chip->cmdfunc(nand, NAND_CMD_STATUS, -1, -1);
+ printf("device is %swrite protected\n",
+ (nand_chip->read_byte(nand) & 0x80 ?
+ "NOT " : ""));
+
+ for (off = 0; off < nand->size; off += nand->erasesize) {
+ int s = nand_get_lock_status(nand, off);
+
+ /* print message only if status has changed */
+ if (s != last_status && off != 0) {
+ print_status(block_start, off, nand->erasesize,
+ last_status);
+ block_start = off;
+ }
+ last_status = s;
+ }
+ /* Print the last block info */
+ print_status(block_start, off, nand->erasesize, last_status);
+}
+#endif
+
int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
int i, dev, ret = 0;
@@ -357,7 +398,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return 1;
}
- printf(" %d bytes %s: %s\n", size,
+ printf(" %zu bytes %s: %s\n", size,
read ? "read" : "written", ret ? "ERROR" : "OK");
return ret == 0 ? 0 : 1;
@@ -383,8 +424,9 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return 1;
}
+#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
if (strcmp(cmd, "lock") == 0) {
- int tight = 0;
+ int tight = 0;
int status = 0;
if (argc == 3) {
if (!strcmp("tight", argv[2]))
@@ -392,44 +434,8 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
if (!strcmp("status", argv[2]))
status = 1;
}
-/*
- * ! BROKEN !
- *
- * TODO: must be implemented and tested by someone with HW
- */
-#if 0
if (status) {
- ulong block_start = 0;
- ulong off;
- int last_status = -1;
-
- struct nand_chip *nand_chip = nand->priv;
- /* check the WP bit */
- nand_chip->cmdfunc (nand, NAND_CMD_STATUS, -1, -1);
- printf("device is %swrite protected\n",
- (nand_chip->read_byte(nand) & 0x80 ?
- "NOT " : ""));
-
- for (off = 0; off < nand->size; off += nand->writesize) {
- int s = nand_get_lock_status(nand, off);
-
- /* print message only if status has changed
- * or at end of chip
- */
- if (off == nand->size - nand->writesize
- || (s != last_status && off != 0)) {
-
- printf("%08lx - %08lx: %8d pages %s%s%s\n",
- block_start,
- off-1,
- (off-block_start)/nand->writesize,
- ((last_status & NAND_LOCK_STATUS_TIGHT) ? "TIGHT " : ""),
- ((last_status & NAND_LOCK_STATUS_LOCK) ? "LOCK " : ""),
- ((last_status & NAND_LOCK_STATUS_UNLOCK) ? "UNLOCK " : ""));
- }
-
- last_status = s;
- }
+ do_nand_status(nand);
} else {
if (!nand_lock(nand, tight)) {
puts("NAND flash successfully locked\n");
@@ -438,7 +444,6 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return 1;
}
}
-#endif
return 0;
}
@@ -446,12 +451,6 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
if (arg_off_size(argc - 2, argv + 2, nand, &off, &size) < 0)
return 1;
-/*
- * ! BROKEN !
- *
- * TODO: must be implemented and tested by someone with HW
- */
-#if 0
if (!nand_unlock(nand, off, size)) {
puts("NAND flash successfully unlocked\n");
} else {
@@ -459,9 +458,9 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
"write and erase will probably fail\n");
return 1;
}
-#endif
return 0;
}
+#endif
usage:
printf("Usage:\n%s\n", cmdtp->usage);
@@ -483,9 +482,12 @@ U_BOOT_CMD(nand, 5, 1, do_nand,
"nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
"nand markbad off - mark bad block at offset (UNSAFE)\n"
"nand biterr off - make a bit error at offset (UNSAFE)\n"
+#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
"nand lock [tight] [status]\n"
" bring nand to lock state or display locked pages\n"
- "nand unlock [offset] [size] - unlock section\n");
+ "nand unlock [offset] [size] - unlock section\n"
+#endif
+);
static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
ulong offset, ulong addr, char *cmd)
@@ -854,13 +856,12 @@ int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
(u_char *) addr);
}
return ret;
- } else if (cmdtail && !strncmp (cmdtail, ".jffs2", 2))
- cmd |= NANDRW_JFFS2; /* skip bad blocks */
- else if (cmdtail && !strncmp (cmdtail, ".jffs2s", 2)) {
+ } else if (cmdtail && !strncmp (cmdtail, ".jffs2s", 7)) {
cmd |= NANDRW_JFFS2; /* skip bad blocks (on read too) */
if (cmd & NANDRW_READ)
cmd |= NANDRW_JFFS2_SKIP; /* skip bad blocks (on read too) */
- }
+ } else if (cmdtail && !strncmp (cmdtail, ".jffs2", 2))
+ cmd |= NANDRW_JFFS2; /* skip bad blocks */
#ifdef SXNI855T
/* need ".e" same as ".j" for compatibility with older units */
else if (cmdtail && !strcmp (cmdtail, ".e"))
diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c
index 8d87b78..6a2c924 100644
--- a/common/cmd_onenand.c
+++ b/common/cmd_onenand.c
@@ -1,7 +1,7 @@
/*
* U-Boot command for OneNAND support
*
- * Copyright (C) 2005-2007 Samsung Electronics
+ * Copyright (C) 2005-2008 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -11,6 +11,7 @@
#include <common.h>
#include <command.h>
+#include <malloc.h>
#include <linux/mtd/compat.h>
#include <linux/mtd/mtd.h>
@@ -18,159 +19,468 @@
#include <asm/io.h>
-extern struct mtd_info onenand_mtd;
-extern struct onenand_chip onenand_chip;
+static struct mtd_info *mtd;
+
+static loff_t next_ofs;
+static loff_t skip_ofs;
+
+static inline int str2long(char *p, ulong *num)
+{
+ char *endptr;
+
+ *num = simple_strtoul(p, &endptr, 16);
+ return (*p != '\0' && *endptr == '\0') ? 1 : 0;
+}
+
+static int arg_off_size(int argc, char *argv[], ulong *off, size_t *size)
+{
+ if (argc >= 1) {
+ if (!(str2long(argv[0], off))) {
+ printf("'%s' is not a number\n", argv[0]);
+ return -1;
+ }
+ } else {
+ *off = 0;
+ }
+
+ if (argc >= 2) {
+ if (!(str2long(argv[1], (ulong *)size))) {
+ printf("'%s' is not a number\n", argv[1]);
+ return -1;
+ }
+ } else {
+ *size = mtd->size - *off;
+ }
+
+ if ((*off + *size) > mtd->size) {
+ printf("total chip size (0x%x) exceeded!\n", mtd->size);
+ return -1;
+ }
+
+ if (*size == mtd->size)
+ puts("whole chip\n");
+ else
+ printf("offset 0x%lx, size 0x%x\n", *off, *size);
+
+ return 0;
+}
+
+static int onenand_block_read(loff_t from, size_t len,
+ size_t *retlen, u_char *buf, int oob)
+{
+ struct onenand_chip *this = mtd->priv;
+ int blocks = (int) len >> this->erase_shift;
+ int blocksize = (1 << this->erase_shift);
+ loff_t ofs = from;
+ struct mtd_oob_ops ops = {
+ .retlen = 0,
+ };
+ int ret;
+
+ if (oob)
+ ops.ooblen = blocksize;
+ else
+ ops.len = blocksize;
+
+ while (blocks) {
+ ret = mtd->block_isbad(mtd, ofs);
+ if (ret) {
+ printk("Bad blocks %d at 0x%x\n",
+ (u32)(ofs >> this->erase_shift), (u32)ofs);
+ ofs += blocksize;
+ continue;
+ }
+
+ if (oob)
+ ops.oobbuf = buf;
+ else
+ ops.datbuf = buf;
+
+ ops.retlen = 0;
+ ret = mtd->read_oob(mtd, ofs, &ops);
+ if (ret) {
+ printk("Read failed 0x%x, %d\n", (u32)ofs, ret);
+ ofs += blocksize;
+ continue;
+ }
+ ofs += blocksize;
+ buf += blocksize;
+ blocks--;
+ *retlen += ops.retlen;
+ }
+
+ return 0;
+}
+
+static int onenand_block_write(loff_t to, size_t len,
+ size_t *retlen, const u_char * buf)
+{
+ struct onenand_chip *this = mtd->priv;
+ int blocks = len >> this->erase_shift;
+ int blocksize = (1 << this->erase_shift);
+ loff_t ofs;
+ size_t _retlen = 0;
+ int ret;
+
+ if (to == next_ofs) {
+ next_ofs = to + len;
+ to += skip_ofs;
+ } else {
+ next_ofs = to + len;
+ skip_ofs = 0;
+ }
+ ofs = to;
+
+ while (blocks) {
+ ret = mtd->block_isbad(mtd, ofs);
+ if (ret) {
+ printk("Bad blocks %d at 0x%x\n",
+ (u32)(ofs >> this->erase_shift), (u32)ofs);
+ skip_ofs += blocksize;
+ goto next;
+ }
+
+ ret = mtd->write(mtd, ofs, blocksize, &_retlen, buf);
+ if (ret) {
+ printk("Write failed 0x%x, %d", (u32)ofs, ret);
+ skip_ofs += blocksize;
+ goto next;
+ }
+
+ buf += blocksize;
+ blocks--;
+ *retlen += _retlen;
+next:
+ ofs += blocksize;
+ }
+
+ return 0;
+}
+
+static int onenand_block_erase(u32 start, u32 size, int force)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct erase_info instr = {
+ .callback = NULL,
+ };
+ loff_t ofs;
+ int ret;
+ int blocksize = 1 << this->erase_shift;
+
+ for (ofs = start; ofs < (start + size); ofs += blocksize) {
+ ret = mtd->block_isbad(mtd, ofs);
+ if (ret && !force) {
+ printf("Skip erase bad block %d at 0x%x\n",
+ (u32)(ofs >> this->erase_shift), (u32)ofs);
+ continue;
+ }
+
+ instr.addr = ofs;
+ instr.len = blocksize;
+ instr.priv = force;
+ instr.mtd = mtd;
+ ret = mtd->erase(mtd, &instr);
+ if (ret) {
+ printf("erase failed block %d at 0x%x\n",
+ (u32)(ofs >> this->erase_shift), (u32)ofs);
+ continue;
+ }
+ }
+
+ return 0;
+}
+
+static int onenand_block_test(u32 start, u32 size)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct erase_info instr = {
+ .callback = NULL,
+ .priv = 0,
+ };
+
+ int blocks;
+ loff_t ofs;
+ int blocksize = 1 << this->erase_shift;
+ int start_block, end_block;
+ size_t retlen;
+ u_char *buf;
+ u_char *verify_buf;
+ int ret;
+
+ buf = malloc(blocksize);
+ if (!buf) {
+ printf("Not enough malloc space available!\n");
+ return -1;
+ }
+
+ verify_buf = malloc(blocksize);
+ if (!verify_buf) {
+ printf("Not enough malloc space available!\n");
+ return -1;
+ }
+
+ start_block = start >> this->erase_shift;
+ end_block = (start + size) >> this->erase_shift;
+
+ /* Protect boot-loader from badblock testing */
+ if (start_block < 2)
+ start_block = 2;
+
+ if (end_block > (mtd->size >> this->erase_shift))
+ end_block = mtd->size >> this->erase_shift;
+
+ blocks = start_block;
+ ofs = start;
+ while (blocks < end_block) {
+ printf("\rTesting block %d at 0x%x", (u32)(ofs >> this->erase_shift), (u32)ofs);
+
+ ret = mtd->block_isbad(mtd, ofs);
+ if (ret) {
+ printf("Skip erase bad block %d at 0x%x\n",
+ (u32)(ofs >> this->erase_shift), (u32)ofs);
+ goto next;
+ }
+
+ instr.addr = ofs;
+ instr.len = blocksize;
+ ret = mtd->erase(mtd, &instr);
+ if (ret) {
+ printk("Erase failed 0x%x, %d\n", (u32)ofs, ret);
+ goto next;
+ }
+
+ ret = mtd->write(mtd, ofs, blocksize, &retlen, buf);
+ if (ret) {
+ printk("Write failed 0x%x, %d\n", (u32)ofs, ret);
+ goto next;
+ }
+
+ ret = mtd->read(mtd, ofs, blocksize, &retlen, verify_buf);
+ if (ret) {
+ printk("Read failed 0x%x, %d\n", (u32)ofs, ret);
+ goto next;
+ }
+
+ if (memcmp(buf, verify_buf, blocksize))
+ printk("\nRead/Write test failed at 0x%x\n", (u32)ofs);
+
+next:
+ ofs += blocksize;
+ blocks++;
+ }
+ printf("...Done\n");
+
+ free(buf);
+ free(verify_buf);
+
+ return 0;
+}
+
+static int onenand_dump(struct mtd_info *mtd, ulong off, int only_oob)
+{
+ int i;
+ u_char *datbuf, *oobbuf, *p;
+ struct mtd_oob_ops ops;
+ loff_t addr;
+
+ datbuf = malloc(mtd->writesize + mtd->oobsize);
+ oobbuf = malloc(mtd->oobsize);
+ if (!datbuf || !oobbuf) {
+ puts("No memory for page buffer\n");
+ return 1;
+ }
+ off &= ~(mtd->writesize - 1);
+ addr = (loff_t) off;
+ memset(&ops, 0, sizeof(ops));
+ ops.datbuf = datbuf;
+ ops.oobbuf = oobbuf; /* must exist, but oob data will be appended to ops.datbuf */
+ ops.len = mtd->writesize;
+ ops.ooblen = mtd->oobsize;
+ ops.retlen = 0;
+ i = mtd->read_oob(mtd, addr, &ops);
+ if (i < 0) {
+ printf("Error (%d) reading page %08lx\n", i, off);
+ free(datbuf);
+ free(oobbuf);
+ return 1;
+ }
+ printf("Page %08lx dump:\n", off);
+ i = mtd->writesize >> 4;
+ p = datbuf;
+
+ while (i--) {
+ if (!only_oob)
+ printf("\t%02x %02x %02x %02x %02x %02x %02x %02x"
+ " %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],
+ p[8], p[9], p[10], p[11], p[12], p[13], p[14],
+ p[15]);
+ p += 16;
+ }
+ puts("OOB:\n");
+ i = mtd->oobsize >> 3;
+ while (i--) {
+ printf("\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
+ p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
+ p += 8;
+ }
+ free(datbuf);
+ free(oobbuf);
+
+ return 0;
+}
int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- int ret = 0;
+ struct onenand_chip *this;
+ int blocksize;
+ ulong addr, ofs;
+ size_t len, retlen = 0;
+ int ret;
+ char *cmd, *s;
+
+ mtd = &onenand_mtd;
+ this = mtd->priv;
+ blocksize = (1 << this->erase_shift);
+
+ cmd = argv[1];
switch (argc) {
case 0:
case 1:
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
+ goto usage;
case 2:
- if (strncmp(argv[1], "open", 4) == 0) {
- onenand_init();
+ if (strcmp(cmd, "info") == 0) {
+ printf("%s\n", mtd->name);
+ return 0;
+ }
+
+ if (strcmp(cmd, "bad") == 0) {
+ /* Currently only one OneNAND device is supported */
+ printf("\nDevice %d bad blocks:\n", 0);
+ for (ofs = 0; ofs < mtd->size; ofs += mtd->erasesize) {
+ if (mtd->block_isbad(mtd, ofs))
+ printf(" %08x\n", (u32)ofs);
+ }
+
return 0;
}
- printf("%s\n", onenand_mtd.name);
- return 0;
default:
/* At least 4 args */
- if (strncmp(argv[1], "erase", 5) == 0) {
- struct erase_info instr = {
- .callback = NULL,
- };
- ulong start, end;
- ulong block;
- char *endtail;
-
- if (strncmp(argv[2], "block", 5) == 0) {
- start = simple_strtoul(argv[3], NULL, 10);
- endtail = strchr(argv[3], '-');
- end = simple_strtoul(endtail + 1, NULL, 10);
- } else {
- start = simple_strtoul(argv[2], NULL, 10);
- end = simple_strtoul(argv[3], NULL, 10);
- start >>= onenand_chip.erase_shift;
- end >>= onenand_chip.erase_shift;
- /* Don't include the end block */
- end--;
- }
+ /*
+ * Syntax is:
+ * 0 1 2 3 4
+ * onenand erase [force] [off size]
+ */
+ if ((strcmp(cmd, "erase") == 0) || (strcmp(cmd, "test") == 0)) {
+ int force = argc > 2 && !strcmp("force", argv[2]);
+ int o = force ? 3 : 2;
+ int erase;
- if (!end || end < 0)
- end = start;
+ erase = strcmp(cmd, "erase") == 0; /* 1 = erase, 0 = test */
+ printf("\nOneNAND %s: ", erase ? "erase" : "test");
- printf("Erase block from %lu to %lu\n", start, end);
+ /* skip first two or three arguments, look for offset and size */
+ if (arg_off_size(argc - o, argv + o, &ofs, &len) != 0)
+ return 1;
- for (block = start; block <= end; block++) {
- instr.addr = block << onenand_chip.erase_shift;
- instr.len = 1 << onenand_chip.erase_shift;
- ret = onenand_erase(&onenand_mtd, &instr);
- if (ret) {
- printf("erase failed %lu\n", block);
- break;
- }
- }
+ if (erase)
+ ret = onenand_block_erase(ofs, len, force);
+ else
+ ret = onenand_block_test(ofs, len);
- return 0;
+ printf("%s\n", ret ? "ERROR" : "OK");
+
+ return ret == 0 ? 0 : 1;
}
- if (strncmp(argv[1], "read", 4) == 0) {
- ulong addr = simple_strtoul(argv[2], NULL, 16);
- ulong ofs = simple_strtoul(argv[3], NULL, 16);
- size_t len = simple_strtoul(argv[4], NULL, 16);
- int oob = strncmp(argv[1], "read.oob", 8) ? 0 : 1;
- struct mtd_oob_ops ops;
+ if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
+ int read;
+ int oob = 0;
- ops.mode = MTD_OOB_PLACE;
+ if (argc < 4)
+ goto usage;
- if (oob) {
- ops.len = 0;
- ops.datbuf = NULL;
- ops.ooblen = len;
- ops.oobbuf = (u_char *) addr;
- } else {
- ops.len = len;
- ops.datbuf = (u_char *) addr;
- ops.ooblen = 0;
- ops.oobbuf = NULL;
- }
- ops.retlen = ops.oobretlen = 0;
+ addr = (ulong)simple_strtoul(argv[2], NULL, 16);
- onenand_mtd.read_oob(&onenand_mtd, ofs, &ops);
- printf("Done\n");
+ read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
+ printf("\nOneNAND %s: ", read ? "read" : "write");
+ if (arg_off_size(argc - 3, argv + 3, &ofs, &len) != 0)
+ return 1;
- return 0;
- }
+ s = strchr(cmd, '.');
+ if ((s != NULL) && (!strcmp(s, ".oob")))
+ oob = 1;
- if (strncmp(argv[1], "write", 5) == 0) {
- ulong addr = simple_strtoul(argv[2], NULL, 16);
- ulong ofs = simple_strtoul(argv[3], NULL, 16);
- size_t len = simple_strtoul(argv[4], NULL, 16);
- size_t retlen = 0;
+ if (read) {
+ ret = onenand_block_read(ofs, len, &retlen,
+ (u8 *)addr, oob);
+ } else {
+ ret = onenand_block_write(ofs, len, &retlen,
+ (u8 *)addr);
+ }
- onenand_write(&onenand_mtd, ofs, len, &retlen,
- (u_char *) addr);
- printf("Done\n");
+ printf(" %d bytes %s: %s\n", retlen,
+ read ? "read" : "written", ret ? "ERROR" : "OK");
- return 0;
+ return ret == 0 ? 0 : 1;
}
- if (strncmp(argv[1], "block", 5) == 0) {
- ulong addr = simple_strtoul(argv[2], NULL, 16);
- ulong block = simple_strtoul(argv[3], NULL, 10);
- ulong page = simple_strtoul(argv[4], NULL, 10);
- size_t len = simple_strtol(argv[5], NULL, 10);
- ulong ofs;
- int oob = strncmp(argv[1], "block.oob", 9) ? 0 : 1;
- struct mtd_oob_ops ops;
-
- ops.mode = MTD_OOB_PLACE;
+ if (strcmp(cmd, "markbad") == 0) {
+ addr = (ulong)simple_strtoul(argv[2], NULL, 16);
+ int ret = mtd->block_markbad(mtd, addr);
+ if (ret == 0) {
+ printf("block 0x%08lx successfully marked as bad\n",
+ (ulong) addr);
+ return 0;
+ } else {
+ printf("block 0x%08lx NOT marked as bad! ERROR %d\n",
+ (ulong) addr, ret);
+ }
+ return 1;
+ }
- ofs = block << onenand_chip.erase_shift;
- if (page)
- ofs += page << onenand_chip.page_shift;
+ if (strncmp(cmd, "dump", 4) == 0) {
+ if (argc < 3)
+ goto usage;
- if (!len) {
- if (oob)
- ops.ooblen = 64;
- else
- ops.len = 512;
- }
+ s = strchr(cmd, '.');
+ ofs = (int)simple_strtoul(argv[2], NULL, 16);
- if (oob) {
- ops.datbuf = NULL;
- ops.oobbuf = (u_char *) addr;
- } else {
- ops.datbuf = (u_char *) addr;
- ops.oobbuf = NULL;
- }
- ops.retlen = ops.oobretlen = 0;
+ if (s != NULL && strcmp(s, ".oob") == 0)
+ ret = onenand_dump(mtd, ofs, 1);
+ else
+ ret = onenand_dump(mtd, ofs, 0);
- onenand_read_oob(&onenand_mtd, ofs, &ops);
- return 0;
+ return ret == 0 ? 1 : 0;
}
break;
}
return 0;
+
+usage:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
}
U_BOOT_CMD(
onenand, 6, 1, do_onenand,
"onenand - OneNAND sub-system\n",
- "info - show available OneNAND devices\n"
- "onenand read[.oob] addr ofs len - read data at ofs with len to addr\n"
- "onenand write addr ofs len - write data at ofs with len from addr\n"
- "onenand erase saddr eaddr - erase block start addr to end addr\n"
- "onenand block[.oob] addr block [page] [len] - "
- "read data with (block [, page]) to addr"
+ "info - show available OneNAND devices\n"
+ "onenand bad - show bad blocks\n"
+ "onenand read[.oob] addr off size\n"
+ "onenand write[.oob] addr off size\n"
+ " read/write 'size' bytes starting at offset 'off'\n"
+ " to/from memory address 'addr', skipping bad blocks.\n"
+ "onenand erase [force] [off size] - erase 'size' bytes from\n"
+ "onenand test [off size] - test 'size' bytes from\n"
+ " offset 'off' (entire device if not specified)\n"
+ "onenand dump[.oob] off - dump page\n"
+ "onenand markbad off - mark bad block at offset (UNSAFE)\n"
);
diff --git a/cpu/microblaze/cache.c b/cpu/microblaze/cache.c
index 4b7866f..3b7c4d4 100644
--- a/cpu/microblaze/cache.c
+++ b/cpu/microblaze/cache.c
@@ -25,8 +25,6 @@
#include <common.h>
#include <asm/asm.h>
-#if defined(CONFIG_CMD_CACHE)
-
int dcache_status (void)
{
int i = 0;
@@ -62,4 +60,3 @@ void dcache_enable (void) {
void dcache_disable(void) {
MSRCLR(0x80);
}
-#endif
diff --git a/doc/README.nand b/doc/README.nand
index bf80bc0..fc62f92 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -172,7 +172,7 @@ More Definitions:
#define ADDR_COLUMN_PAGE 3
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
- #define NAND_MAX_CHIPS 1
+ #define CONFIG_SYS_NAND_MAX_CHIPS 1
#define CONFIG_SYS_DAVINCI_BROKEN_ECC
Versions of U-Boot <= 1.3.3 and Montavista Linux kernels
diff --git a/drivers/mtd/nand/nand.c b/drivers/mtd/nand/nand.c
index eeb19ff..cf92617 100644
--- a/drivers/mtd/nand/nand.c
+++ b/drivers/mtd/nand/nand.c
@@ -36,8 +36,6 @@ static ulong base_address[CONFIG_SYS_MAX_NAND_DEVICE] = CONFIG_SYS_NAND_BASE_LIS
static const char default_nand_name[] = "nand";
-extern int board_nand_init(struct nand_chip *nand);
-
static void nand_init_chip(struct mtd_info *mtd, struct nand_chip *nand,
ulong base_addr)
{
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 94a65d4..ef37f97 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2144,7 +2144,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
{
int page, len, status, pages_per_block, ret, chipnr;
struct nand_chip *chip = mtd->priv;
- int rewrite_bbt[NAND_MAX_CHIPS]={0};
+ int rewrite_bbt[CONFIG_SYS_NAND_MAX_CHIPS]={0};
unsigned int bbt_masked_page = 0xffffffff;
MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%08x, len = %i\n",
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index d86c987..6ba52b3 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -238,7 +238,8 @@ static struct nand_ecclayout autoplace_ecclayout = {
#endif
/* XXX U-BOOT XXX */
-#if 0
+#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
+
/******************************************************************************
* Support for locking / unlocking operations of some NAND devices
*****************************************************************************/
@@ -253,7 +254,7 @@ static struct nand_ecclayout autoplace_ecclayout = {
* nand_lock: Set all pages of NAND flash chip to the LOCK or LOCK-TIGHT
* state
*
- * @param meminfo nand mtd instance
+ * @param mtd nand mtd instance
* @param tight bring device in lock tight mode
*
* @return 0 on success, -1 in case of error
@@ -270,21 +271,21 @@ static struct nand_ecclayout autoplace_ecclayout = {
* calls will fail. It is only posible to leave lock-tight state by
* an hardware signal (low pulse on _WP pin) or by power down.
*/
-int nand_lock(nand_info_t *meminfo, int tight)
+int nand_lock(struct mtd_info *mtd, int tight)
{
int ret = 0;
int status;
- struct nand_chip *this = meminfo->priv;
+ struct nand_chip *chip = mtd->priv;
/* select the NAND device */
- this->select_chip(meminfo, 0);
+ chip->select_chip(mtd, 0);
- this->cmdfunc(meminfo,
+ chip->cmdfunc(mtd,
(tight ? NAND_CMD_LOCK_TIGHT : NAND_CMD_LOCK),
-1, -1);
/* call wait ready function */
- status = this->waitfunc(meminfo, this, FL_WRITING);
+ status = chip->waitfunc(mtd, chip);
/* see if device thinks it succeeded */
if (status & 0x01) {
@@ -292,7 +293,7 @@ int nand_lock(nand_info_t *meminfo, int tight)
}
/* de-select the NAND device */
- this->select_chip(meminfo, -1);
+ chip->select_chip(mtd, -1);
return ret;
}
@@ -300,7 +301,7 @@ int nand_lock(nand_info_t *meminfo, int tight)
* nand_get_lock_status: - query current lock state from one page of NAND
* flash
*
- * @param meminfo nand mtd instance
+ * @param mtd nand mtd instance
* @param offset page address to query (muss be page aligned!)
*
* @return -1 in case of error
@@ -311,19 +312,19 @@ int nand_lock(nand_info_t *meminfo, int tight)
* NAND_LOCK_STATUS_UNLOCK: page unlocked
*
*/
-int nand_get_lock_status(nand_info_t *meminfo, ulong offset)
+int nand_get_lock_status(struct mtd_info *mtd, ulong offset)
{
int ret = 0;
int chipnr;
int page;
- struct nand_chip *this = meminfo->priv;
+ struct nand_chip *chip = mtd->priv;
/* select the NAND device */
- chipnr = (int)(offset >> this->chip_shift);
- this->select_chip(meminfo, chipnr);
+ chipnr = (int)(offset >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
- if ((offset & (meminfo->writesize - 1)) != 0) {
+ if ((offset & (mtd->writesize - 1)) != 0) {
printf ("nand_get_lock_status: "
"Start address must be beginning of "
"nand page!\n");
@@ -332,16 +333,16 @@ int nand_get_lock_status(nand_info_t *meminfo, ulong offset)
}
/* check the Lock Status */
- page = (int)(offset >> this->page_shift);
- this->cmdfunc(meminfo, NAND_CMD_LOCK_STATUS, -1, page & this->pagemask);
+ page = (int)(offset >> chip->page_shift);
+ chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, page & chip->pagemask);
- ret = this->read_byte(meminfo) & (NAND_LOCK_STATUS_TIGHT
+ ret = chip->read_byte(mtd) & (NAND_LOCK_STATUS_TIGHT
| NAND_LOCK_STATUS_LOCK
| NAND_LOCK_STATUS_UNLOCK);
out:
/* de-select the NAND device */
- this->select_chip(meminfo, -1);
+ chip->select_chip(mtd, -1);
return ret;
}
@@ -349,59 +350,65 @@ int nand_get_lock_status(nand_info_t *meminfo, ulong offset)
* nand_unlock: - Unlock area of NAND pages
* only one consecutive area can be unlocked at one time!
*
- * @param meminfo nand mtd instance
+ * @param mtd nand mtd instance
* @param start start byte address
* @param length number of bytes to unlock (must be a multiple of
* page size nand->writesize)
*
* @return 0 on success, -1 in case of error
*/
-int nand_unlock(nand_info_t *meminfo, ulong start, ulong length)
+int nand_unlock(struct mtd_info *mtd, ulong start, ulong length)
{
int ret = 0;
int chipnr;
int status;
int page;
- struct nand_chip *this = meminfo->priv;
+ struct nand_chip *chip = mtd->priv;
printf ("nand_unlock: start: %08x, length: %d!\n",
(int)start, (int)length);
/* select the NAND device */
- chipnr = (int)(start >> this->chip_shift);
- this->select_chip(meminfo, chipnr);
+ chipnr = (int)(start >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
/* check the WP bit */
- this->cmdfunc(meminfo, NAND_CMD_STATUS, -1, -1);
- if ((this->read_byte(meminfo) & 0x80) == 0) {
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+ if (!(chip->read_byte(mtd) & NAND_STATUS_WP)) {
printf ("nand_unlock: Device is write protected!\n");
ret = -1;
goto out;
}
- if ((start & (meminfo->writesize - 1)) != 0) {
+ if ((start & (mtd->erasesize - 1)) != 0) {
printf ("nand_unlock: Start address must be beginning of "
- "nand page!\n");
+ "nand block!\n");
ret = -1;
goto out;
}
- if (length == 0 || (length & (meminfo->writesize - 1)) != 0) {
- printf ("nand_unlock: Length must be a multiple of nand page "
- "size!\n");
+ if (length == 0 || (length & (mtd->erasesize - 1)) != 0) {
+ printf ("nand_unlock: Length must be a multiple of nand block "
+ "size %08x!\n", mtd->erasesize);
ret = -1;
goto out;
}
+ /*
+ * Set length so that the last address is set to the
+ * starting address of the last block
+ */
+ length -= mtd->erasesize;
+
/* submit address of first page to unlock */
- page = (int)(start >> this->page_shift);
- this->cmdfunc(meminfo, NAND_CMD_UNLOCK1, -1, page & this->pagemask);
+ page = (int)(start >> chip->page_shift);
+ chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask);
/* submit ADDRESS of LAST page to unlock */
- page += (int)(length >> this->page_shift) - 1;
- this->cmdfunc(meminfo, NAND_CMD_UNLOCK2, -1, page & this->pagemask);
+ page += (int)(length >> chip->page_shift);
+ chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1, page & chip->pagemask);
/* call wait ready function */
- status = this->waitfunc(meminfo, this, FL_WRITING);
+ status = chip->waitfunc(mtd, chip);
/* see if device thinks it succeeded */
if (status & 0x01) {
/* there was an error */
@@ -411,7 +418,7 @@ int nand_unlock(nand_info_t *meminfo, ulong start, ulong length)
out:
/* de-select the NAND device */
- this->select_chip(meminfo, -1);
+ chip->select_chip(mtd, -1);
return ret;
}
#endif
@@ -488,7 +495,7 @@ int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
if (len_incl_bad == *length) {
rval = nand_write (nand, offset, length, buffer);
if (rval != 0)
- printf ("NAND write to offset %x failed %d\n",
+ printf ("NAND write to offset %zx failed %d\n",
offset, rval);
return rval;
@@ -499,7 +506,7 @@ int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
size_t write_size;
if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
- printf ("Skip bad block 0x%08x\n",
+ printf ("Skip bad block 0x%08zx\n",
offset & ~(nand->erasesize - 1));
offset += nand->erasesize - block_offset;
continue;
@@ -512,7 +519,7 @@ int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
rval = nand_write (nand, offset, &write_size, p_buffer);
if (rval != 0) {
- printf ("NAND write to offset %x failed %d\n",
+ printf ("NAND write to offset %zx failed %d\n",
offset, rval);
*length -= left_to_write;
return rval;
@@ -558,7 +565,7 @@ int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
if (len_incl_bad == *length) {
rval = nand_read (nand, offset, length, buffer);
if (rval != 0)
- printf ("NAND read from offset %x failed %d\n",
+ printf ("NAND read from offset %zx failed %d\n",
offset, rval);
return rval;
@@ -569,7 +576,7 @@ int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
size_t read_length;
if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
- printf ("Skipping bad block 0x%08x\n",
+ printf ("Skipping bad block 0x%08zx\n",
offset & ~(nand->erasesize - 1));
offset += nand->erasesize - block_offset;
continue;
@@ -582,7 +589,7 @@ int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
rval = nand_read (nand, offset, &read_length, p_buffer);
if (rval != 0) {
- printf ("NAND read from offset %x failed %d\n",
+ printf ("NAND read from offset %zx failed %d\n",
offset, rval);
*length -= left_to_read;
return rval;
diff --git a/drivers/mtd/nand_legacy/nand_legacy.c b/drivers/mtd/nand_legacy/nand_legacy.c
index 407e901..441780a 100644
--- a/drivers/mtd/nand_legacy/nand_legacy.c
+++ b/drivers/mtd/nand_legacy/nand_legacy.c
@@ -457,7 +457,7 @@ static void NanD_ScanChips(struct nand_chip *nand)
{
int floor, chip;
int numchips[NAND_MAX_FLOORS];
- int maxchips = NAND_MAX_CHIPS;
+ int maxchips = CONFIG_SYS_NAND_MAX_CHIPS;
int ret = 1;
nand->numchips = 0;
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 9b7bf3a..d482437 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -36,6 +36,35 @@ static inline void *memcpy_16(void *dst, const void *src, unsigned int len)
return ret;
}
+/**
+ * onenand_oob_64 - oob info for large (2KB) page
+ */
+static struct nand_ecclayout onenand_oob_64 = {
+ .eccbytes = 20,
+ .eccpos = {
+ 8, 9, 10, 11, 12,
+ 24, 25, 26, 27, 28,
+ 40, 41, 42, 43, 44,
+ 56, 57, 58, 59, 60,
+ },
+ .oobfree = {
+ {2, 3}, {14, 2}, {18, 3}, {30, 2},
+ {34, 3}, {46, 2}, {50, 3}, {62, 2}
+ }
+};
+
+/**
+ * onenand_oob_32 - oob info for middle (1KB) page
+ */
+static struct nand_ecclayout onenand_oob_32 = {
+ .eccbytes = 10,
+ .eccpos = {
+ 8, 9, 10, 11, 12,
+ 24, 25, 26, 27, 28,
+ },
+ .oobfree = { {2, 3}, {14, 2}, {18, 3}, {30, 2} }
+};
+
static const unsigned char ffchars[] = {
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */
@@ -78,20 +107,11 @@ static void onenand_writew(unsigned short value, void __iomem * addr)
*
* Setup Start Address 1 Register (F100h)
*/
-static int onenand_block_address(int device, int block)
+static int onenand_block_address(struct onenand_chip *this, int block)
{
- if (device & ONENAND_DEVICE_IS_DDP) {
- /* Device Flash Core select, NAND Flash Block Address */
- int dfs = 0, density, mask;
-
- density = device >> ONENAND_DEVICE_DENSITY_SHIFT;
- mask = (1 << (density + 6));
-
- if (block & mask)
- dfs = 1;
-
- return (dfs << ONENAND_DDP_SHIFT) | (block & (mask - 1));
- }
+ /* Device Flash Core select, NAND Flash Block Address */
+ if (block & this->density_mask)
+ return ONENAND_DDP_CHIP1 | (block ^ this->density_mask);
return block;
}
@@ -104,22 +124,13 @@ static int onenand_block_address(int device, int block)
*
* Setup Start Address 2 Register (F101h) for DDP
*/
-static int onenand_bufferram_address(int device, int block)
+static int onenand_bufferram_address(struct onenand_chip *this, int block)
{
- if (device & ONENAND_DEVICE_IS_DDP) {
- /* Device BufferRAM Select */
- int dbs = 0, density, mask;
-
- density = device >> ONENAND_DEVICE_DENSITY_SHIFT;
- mask = (1 << (density + 6));
-
- if (block & mask)
- dbs = 1;
+ /* Device BufferRAM Select */
+ if (block & this->density_mask)
+ return ONENAND_DDP_CHIP1;
- return (dbs << ONENAND_DDP_SHIFT);
- }
-
- return 0;
+ return ONENAND_DDP_CHIP0;
}
/**
@@ -169,6 +180,18 @@ static int onenand_buffer_address(int dataram1, int sectors, int count)
}
/**
+ * onenand_get_density - [DEFAULT] Get OneNAND density
+ * @param dev_id OneNAND device ID
+ *
+ * Get OneNAND density from device ID
+ */
+static inline int onenand_get_density(int dev_id)
+{
+ int density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+ return (density & ONENAND_DEVICE_DENSITY_MASK);
+}
+
+/**
* onenand_command - [DEFAULT] Send command to OneNAND device
* @param mtd MTD device structure
* @param cmd the command to be sent
@@ -192,6 +215,7 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
case ONENAND_CMD_UNLOCK:
case ONENAND_CMD_LOCK:
case ONENAND_CMD_LOCK_TIGHT:
+ case ONENAND_CMD_UNLOCK_ALL:
block = -1;
page = -1;
break;
@@ -212,7 +236,7 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
/* NOTE: The setting order of the registers is very important! */
if (cmd == ONENAND_CMD_BUFFERRAM) {
/* Select DataRAM for DDP */
- value = onenand_bufferram_address(this->device_id, block);
+ value = onenand_bufferram_address(this, block);
this->write_word(value,
this->base + ONENAND_REG_START_ADDRESS2);
@@ -224,9 +248,14 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
if (block != -1) {
/* Write 'DFS, FBA' of Flash */
- value = onenand_block_address(this->device_id, block);
+ value = onenand_block_address(this, block);
this->write_word(value,
this->base + ONENAND_REG_START_ADDRESS1);
+
+ /* Write 'DFS, FBA' of Flash */
+ value = onenand_bufferram_address(this, block);
+ this->write_word(value,
+ this->base + ONENAND_REG_START_ADDRESS2);
}
if (page != -1) {
@@ -252,15 +281,6 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
/* Write 'BSA, BSC' of DataRAM */
value = onenand_buffer_address(dataram, sectors, count);
this->write_word(value, this->base + ONENAND_REG_START_BUFFER);
-
- if (readcmd) {
- /* Select DataRAM for DDP */
- value =
- onenand_bufferram_address(this->device_id, block);
- this->write_word(value,
- this->base +
- ONENAND_REG_START_ADDRESS2);
- }
}
/* Interrupt clear */
@@ -296,14 +316,11 @@ static int onenand_wait(struct mtd_info *mtd, int state)
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
if (ctrl & ONENAND_CTRL_ERROR) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "onenand_wait: controller error = 0x%04x\n", ctrl);
- return -EAGAIN;
- }
+ printk("onenand_wait: controller error = 0x%04x\n", ctrl);
+ if (ctrl & ONENAND_CTRL_LOCK)
+ printk("onenand_wait: it's locked error = 0x%04x\n",
+ ctrl);
- if (ctrl & ONENAND_CTRL_LOCK) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "onenand_wait: it's locked error = 0x%04x\n", ctrl);
return -EIO;
}
@@ -351,7 +368,7 @@ static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)
*
* Read the BufferRAM area
*/
-static int onenand_read_bufferram(struct mtd_info *mtd, int area,
+static int onenand_read_bufferram(struct mtd_info *mtd, loff_t addr, int area,
unsigned char *buffer, int offset,
size_t count)
{
@@ -376,7 +393,7 @@ static int onenand_read_bufferram(struct mtd_info *mtd, int area,
*
* Read the BufferRAM area with Sync. Burst Mode
*/
-static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area,
+static int onenand_sync_read_bufferram(struct mtd_info *mtd, loff_t addr, int area,
unsigned char *buffer, int offset,
size_t count)
{
@@ -405,7 +422,7 @@ static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area,
*
* Write the BufferRAM area
*/
-static int onenand_write_bufferram(struct mtd_info *mtd, int area,
+static int onenand_write_bufferram(struct mtd_info *mtd, loff_t addr, int area,
const unsigned char *buffer, int offset,
size_t count)
{
@@ -421,6 +438,30 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area,
}
/**
+ * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
+ * @param mtd MTD data structure
+ * @param addr address to check
+ * @return blockpage address
+ *
+ * Get blockpage address at 2x program mode
+ */
+static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr)
+{
+ struct onenand_chip *this = mtd->priv;
+ int blockpage, block, page;
+
+ /* Calculate the even block number */
+ block = (int) (addr >> this->erase_shift) & ~1;
+ /* Is it the odd plane? */
+ if (addr & this->writesize)
+ block++;
+ page = (int) (addr >> (this->page_shift + 1)) & this->page_mask;
+ blockpage = (block << 7) | page;
+
+ return blockpage;
+}
+
+/**
* onenand_check_bufferram - [GENERIC] Check BufferRAM information
* @param mtd MTD data structure
* @param addr address to check
@@ -431,21 +472,39 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area,
static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
{
struct onenand_chip *this = mtd->priv;
- int block, page;
- int i;
+ int blockpage, found = 0;
+ unsigned int i;
- block = (int)(addr >> this->erase_shift);
- page = (int)(addr >> this->page_shift);
- page &= this->page_mask;
+#ifdef CONFIG_S3C64XX
+ return 0;
+#endif
- i = ONENAND_CURRENT_BUFFERRAM(this);
+ if (ONENAND_IS_2PLANE(this))
+ blockpage = onenand_get_2x_blockpage(mtd, addr);
+ else
+ blockpage = (int) (addr >> this->page_shift);
/* Is there valid data? */
- if (this->bufferram[i].block == block &&
- this->bufferram[i].page == page && this->bufferram[i].valid)
- return 1;
+ i = ONENAND_CURRENT_BUFFERRAM(this);
+ if (this->bufferram[i].blockpage == blockpage)
+ found = 1;
+ else {
+ /* Check another BufferRAM */
+ i = ONENAND_NEXT_BUFFERRAM(this);
+ if (this->bufferram[i].blockpage == blockpage) {
+ ONENAND_SET_NEXT_BUFFERRAM(this);
+ found = 1;
+ }
+ }
- return 0;
+ if (found && ONENAND_IS_DDP(this)) {
+ /* Select DataRAM for DDP */
+ int block = (int) (addr >> this->erase_shift);
+ int value = onenand_bufferram_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+ }
+
+ return found;
}
/**
@@ -460,25 +519,25 @@ static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
int valid)
{
struct onenand_chip *this = mtd->priv;
- int block, page;
- int i;
+ int blockpage;
+ unsigned int i;
- block = (int)(addr >> this->erase_shift);
- page = (int)(addr >> this->page_shift);
- page &= this->page_mask;
+ if (ONENAND_IS_2PLANE(this))
+ blockpage = onenand_get_2x_blockpage(mtd, addr);
+ else
+ blockpage = (int)(addr >> this->page_shift);
- /* Invalidate BufferRAM */
- for (i = 0; i < MAX_BUFFERRAM; i++) {
- if (this->bufferram[i].block == block &&
- this->bufferram[i].page == page)
- this->bufferram[i].valid = 0;
- }
+ /* Invalidate another BufferRAM */
+ i = ONENAND_NEXT_BUFFERRAM(this);
+ if (this->bufferram[i].blockpage == blockpage)
+ this->bufferram[i].blockpage = -1;
/* Update BufferRAM */
i = ONENAND_CURRENT_BUFFERRAM(this);
- this->bufferram[i].block = block;
- this->bufferram[i].page = page;
- this->bufferram[i].valid = valid;
+ if (valid)
+ this->bufferram[i].blockpage = blockpage;
+ else
+ this->bufferram[i].blockpage = -1;
return 0;
}
@@ -500,10 +559,10 @@ static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr,
/* Invalidate BufferRAM */
for (i = 0; i < MAX_BUFFERRAM; i++) {
- loff_t buf_addr = this->bufferram[i].block << this->erase_shift;
+ loff_t buf_addr = this->bufferram[i].blockpage << this->page_shift;
if (buf_addr >= addr && buf_addr < end_addr)
- this->bufferram[i].valid = 0;
+ this->bufferram[i].blockpage = -1;
}
}
@@ -556,7 +615,7 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf,
readend += free->offset - lastgap;
lastgap = free->offset + free->length;
}
- this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
+ this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
free = this->ecclayout->oobfree;
for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
int free_end = free->offset + free->length;
@@ -594,9 +653,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
int ret = 0, boundary = 0;
int writesize = this->writesize;
- MTDDEBUG(MTD_DEBUG_LEVEL3,
- "onenand_read_ops_nolock: from = 0x%08x, len = %i\n",
- (unsigned int) from, (int) len);
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ops_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
if (ops->mode == MTD_OOB_AUTO)
oobsize = this->ecclayout->oobavail;
@@ -620,6 +677,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
/* Do first load to bufferRAM */
if (read < len) {
if (!onenand_check_bufferram(mtd, from)) {
+ this->main_buf = buf;
this->command(mtd, ONENAND_CMD_READ, from, writesize);
ret = this->wait(mtd, FL_READING);
onenand_update_bufferram(mtd, from, !ret);
@@ -637,6 +695,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
/* If there is more to load then start next load */
from += thislen;
if (read + thislen < len) {
+ this->main_buf = buf + thislen;
this->command(mtd, ONENAND_CMD_READ, from, writesize);
/*
* Chip boundary handling in DDP
@@ -653,7 +712,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
}
/* While load is going, read from last bufferRAM */
- this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
+ this->read_bufferram(mtd, from - thislen, ONENAND_DATARAM, buf, column, thislen);
/* Read oob area if needed */
if (oobbuf) {
@@ -663,7 +722,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
if (ops->mode == MTD_OOB_AUTO)
onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
else
- this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
+ this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
oobread += thisooblen;
oobbuf += thisooblen;
oobcolumn = 0;
@@ -726,9 +785,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
from += ops->ooboffs;
- MTDDEBUG(MTD_DEBUG_LEVEL3,
- "onenand_read_oob_nolock: from = 0x%08x, len = %i\n",
- (unsigned int) from, (int) len);
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
/* Initialize return length value */
ops->oobretlen = 0;
@@ -759,6 +816,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
thislen = oobsize - column;
thislen = min_t(int, thislen, len);
+ this->spare_buf = buf;
this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
onenand_update_bufferram(mtd, from, 0);
@@ -772,7 +830,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
if (mode == MTD_OOB_AUTO)
onenand_transfer_auto_oob(mtd, buf, column, thislen);
else
- this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
+ this->read_bufferram(mtd, 0, ONENAND_SPARERAM, buf, column, thislen);
read += thislen;
@@ -886,12 +944,6 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)
interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
- /* Initial bad block case: 0x2400 or 0x0400 */
- if (ctrl & ONENAND_CTRL_ERROR) {
- printk(KERN_DEBUG "onenand_bbt_wait: controller error = 0x%04x\n", ctrl);
- return ONENAND_BBT_READ_ERROR;
- }
-
if (interrupt & ONENAND_INT_READ) {
int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
if (ecc & ONENAND_ECC_2BIT_ALL)
@@ -902,6 +954,12 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)
return ONENAND_BBT_READ_FATAL_ERROR;
}
+ /* Initial bad block case: 0x2400 or 0x0400 */
+ if (ctrl & ONENAND_CTRL_ERROR) {
+ printk(KERN_DEBUG "onenand_bbt_wait: controller error = 0x%04x\n", ctrl);
+ return ONENAND_BBT_READ_ERROR;
+ }
+
return 0;
}
@@ -922,9 +980,7 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
size_t len = ops->ooblen;
u_char *buf = ops->oobbuf;
- MTDDEBUG(MTD_DEBUG_LEVEL3,
- "onenand_bbt_read_oob: from = 0x%08x, len = %zi\n",
- (unsigned int) from, len);
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "onenand_bbt_read_oob: from = 0x%08x, len = %zi\n", (unsigned int) from, len);
/* Initialize return value */
ops->oobretlen = 0;
@@ -945,15 +1001,16 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
thislen = mtd->oobsize - column;
thislen = min_t(int, thislen, len);
+ this->spare_buf = buf;
this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
onenand_update_bufferram(mtd, from, 0);
- ret = onenand_bbt_wait(mtd, FL_READING);
+ ret = this->bbt_wait(mtd, FL_READING);
if (ret)
break;
- this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
+ this->read_spareram(mtd, 0, ONENAND_SPARERAM, buf, column, thislen);
read += thislen;
if (read == len)
break;
@@ -995,7 +1052,7 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
if (status)
return status;
- this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
+ this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
for (i = 0; i < mtd->oobsize; i++)
if (buf[i] != 0xFF && buf[i] != oob_buf[i])
return -EBADMSG;
@@ -1051,7 +1108,7 @@ static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr,
#define onenand_verify_oob(...) (0)
#endif
-#define NOTALIGNED(x) ((x & (mtd->writesize - 1)) != 0)
+#define NOTALIGNED(x) ((x & (this->subpagesize - 1)) != 0)
/**
* onenand_fill_auto_oob - [Internal] oob auto-placement transfer
@@ -1115,9 +1172,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
u_char *oobbuf;
int ret = 0;
- MTDDEBUG(MTD_DEBUG_LEVEL3,
- "onenand_write_ops_nolock: to = 0x%08x, len = %i\n",
- (unsigned int) to, (int) len);
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "onenand_write_ops_nolock: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
/* Initialize retlen, in case of early exit */
ops->retlen = 0;
@@ -1161,7 +1216,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
wbuf = this->page_buf;
}
- this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
+ this->write_bufferram(mtd, to, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
if (oob) {
oobbuf = this->oob_buf;
@@ -1180,7 +1235,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
} else
oobbuf = (u_char *) ffchars;
- this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
+ this->write_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
@@ -1244,9 +1299,7 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
to += ops->ooboffs;
- MTDDEBUG(MTD_DEBUG_LEVEL3,
- "onenand_write_oob_nolock: to = 0x%08x, len = %i\n",
- (unsigned int) to, (int) len);
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob_nolock: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
/* Initialize retlen, in case of early exit */
ops->oobretlen = 0;
@@ -1293,7 +1346,7 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
else
memcpy(oobbuf + column, buf, thislen);
- this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
+ this->write_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
@@ -1466,7 +1519,14 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
while (len) {
- /* TODO Check badblock */
+ /* Check if we have a bad block, we do not erase bad blocks */
+ if (instr->priv == 0 && onenand_block_isbad_nolock(mtd, addr, 0)) {
+ printk(KERN_WARNING "onenand_erase: attempt to erase"
+ " a bad block at addr 0x%08x\n",
+ (unsigned int) addr);
+ instr->state = MTD_ERASE_FAILED;
+ goto erase_exit;
+ }
this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
@@ -1482,8 +1542,16 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_erase: "
"Failed erase, block %d\n",
(unsigned)(addr >> this->erase_shift));
+ if (ret == -EPERM)
+ printk("onenand_erase: "
+ "Device is write protected!!!\n");
+ else
+ printk("onenand_erase: "
+ "Failed erase, block %d\n",
+ (unsigned)(addr >> this->erase_shift));
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = addr;
+
goto erase_exit;
}
@@ -1493,7 +1561,7 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
instr->state = MTD_ERASE_DONE;
- erase_exit:
+erase_exit:
ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
/* Do call back function */
@@ -1545,6 +1613,37 @@ int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
}
/**
+ * onenand_default_block_markbad - [DEFAULT] mark a block bad
+ * @param mtd MTD device structure
+ * @param ofs offset from device start
+ *
+ * This is the default implementation, which can be overridden by
+ * a hardware specific driver.
+ */
+static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct bbm_info *bbm = this->bbm;
+ u_char buf[2] = {0, 0};
+ struct mtd_oob_ops ops = {
+ .mode = MTD_OOB_PLACE,
+ .ooblen = 2,
+ .oobbuf = buf,
+ .ooboffs = 0,
+ };
+ int block;
+
+ /* Get block number */
+ block = ((int) ofs) >> bbm->bbt_erase_shift;
+ if (bbm->bbt)
+ bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+
+ /* We write two bytes, so we dont have to mess with 16 bit access */
+ ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
+ return onenand_write_oob_nolock(mtd, ofs, &ops);
+}
+
+/**
* onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
@@ -1569,23 +1668,30 @@ int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
}
/**
- * onenand_unlock - [MTD Interface] Unlock block(s)
- * @param mtd MTD device structure
- * @param ofs offset relative to mtd start
- * @param len number of bytes to unlock
+ * onenand_do_lock_cmd - [OneNAND Interface] Lock or unlock block(s)
+ * @param mtd MTD device structure
+ * @param ofs offset relative to mtd start
+ * @param len number of bytes to lock or unlock
+ * @param cmd lock or unlock command
*
- * Unlock one or more blocks
+ * Lock or unlock one or more blocks
*/
-int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int cmd)
{
struct onenand_chip *this = mtd->priv;
int start, end, block, value, status;
+ int wp_status_mask;
start = ofs >> this->erase_shift;
end = len >> this->erase_shift;
+ if (cmd == ONENAND_CMD_LOCK)
+ wp_status_mask = ONENAND_WP_LS;
+ else
+ wp_status_mask = ONENAND_WP_US;
+
/* Continuous lock scheme */
- if (this->options & ONENAND_CONT_LOCK) {
+ if (this->options & ONENAND_HAS_CONT_LOCK) {
/* Set start block address */
this->write_word(start,
this->base + ONENAND_REG_START_BLOCK_ADDRESS);
@@ -1593,7 +1699,7 @@ int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
this->write_word(end - 1,
this->base + ONENAND_REG_END_BLOCK_ADDRESS);
/* Write unlock command */
- this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0);
+ this->command(mtd, cmd, 0, 0);
/* There's no return value */
this->wait(mtd, FL_UNLOCKING);
@@ -1612,7 +1718,14 @@ int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
}
/* Block lock scheme */
- for (block = start; block < end; block++) {
+ for (block = start; block < start + end; block++) {
+ /* Set block address */
+ value = onenand_block_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
+ /* Select DataRAM for DDP */
+ value = onenand_bufferram_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+
/* Set start block address */
this->write_word(block,
this->base + ONENAND_REG_START_BLOCK_ADDRESS);
@@ -1627,11 +1740,6 @@ int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
& ONENAND_CTRL_ONGO)
continue;
- /* Set block address for read block status */
- value = onenand_block_address(this->device_id, block);
- this->write_word(value,
- this->base + ONENAND_REG_START_ADDRESS1);
-
/* Check lock status */
status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
if (!(status & ONENAND_WP_US))
@@ -1642,32 +1750,199 @@ int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
return 0;
}
+#ifdef ONENAND_LINUX
+/**
+ * onenand_lock - [MTD Interface] Lock block(s)
+ * @param mtd MTD device structure
+ * @param ofs offset relative to mtd start
+ * @param len number of bytes to unlock
+ *
+ * Lock one or more blocks
+ */
+static int onenand_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+ int ret;
+
+ onenand_get_device(mtd, FL_LOCKING);
+ ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_LOCK);
+ onenand_release_device(mtd);
+ return ret;
+}
+
+/**
+ * onenand_unlock - [MTD Interface] Unlock block(s)
+ * @param mtd MTD device structure
+ * @param ofs offset relative to mtd start
+ * @param len number of bytes to unlock
+ *
+ * Unlock one or more blocks
+ */
+static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+ int ret;
+
+ onenand_get_device(mtd, FL_LOCKING);
+ ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
+ onenand_release_device(mtd);
+ return ret;
+}
+#endif
+
+/**
+ * onenand_check_lock_status - [OneNAND Interface] Check lock status
+ * @param this onenand chip data structure
+ *
+ * Check lock status
+ */
+static int onenand_check_lock_status(struct onenand_chip *this)
+{
+ unsigned int value, block, status;
+ unsigned int end;
+
+ end = this->chipsize >> this->erase_shift;
+ for (block = 0; block < end; block++) {
+ /* Set block address */
+ value = onenand_block_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
+ /* Select DataRAM for DDP */
+ value = onenand_bufferram_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+ /* Set start block address */
+ this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
+
+ /* Check lock status */
+ status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
+ if (!(status & ONENAND_WP_US)) {
+ printk(KERN_ERR "block = %d, wp status = 0x%x\n", block, status);
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+/**
+ * onenand_unlock_all - [OneNAND Interface] unlock all blocks
+ * @param mtd MTD device structure
+ *
+ * Unlock all blocks
+ */
+static void onenand_unlock_all(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ loff_t ofs = 0;
+ size_t len = this->chipsize;
+
+ if (this->options & ONENAND_HAS_UNLOCK_ALL) {
+ /* Set start block address */
+ this->write_word(0, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
+ /* Write unlock command */
+ this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
+
+ /* There's no return value */
+ this->wait(mtd, FL_LOCKING);
+
+ /* Sanity check */
+ while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
+ & ONENAND_CTRL_ONGO)
+ continue;
+
+ return;
+
+ /* Check lock status */
+ if (onenand_check_lock_status(this))
+ return;
+
+ /* Workaround for all block unlock in DDP */
+ if (ONENAND_IS_DDP(this)) {
+ /* All blocks on another chip */
+ ofs = this->chipsize >> 1;
+ len = this->chipsize >> 1;
+ }
+ }
+
+ onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
+}
+
+
+/**
+ * onenand_check_features - Check and set OneNAND features
+ * @param mtd MTD data structure
+ *
+ * Check and set OneNAND features
+ * - lock scheme
+ * - two plane
+ */
+static void onenand_check_features(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned int density, process;
+
+ /* Lock scheme depends on density and process */
+ density = onenand_get_density(this->device_id);
+ process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
+
+ /* Lock scheme */
+ switch (density) {
+ case ONENAND_DEVICE_DENSITY_4Gb:
+ this->options |= ONENAND_HAS_2PLANE;
+
+ case ONENAND_DEVICE_DENSITY_2Gb:
+ /* 2Gb DDP don't have 2 plane */
+ if (!ONENAND_IS_DDP(this))
+ this->options |= ONENAND_HAS_2PLANE;
+ this->options |= ONENAND_HAS_UNLOCK_ALL;
+
+ case ONENAND_DEVICE_DENSITY_1Gb:
+ /* A-Die has all block unlock */
+ if (process)
+ this->options |= ONENAND_HAS_UNLOCK_ALL;
+ break;
+
+ default:
+ /* Some OneNAND has continuous lock scheme */
+ if (!process)
+ this->options |= ONENAND_HAS_CONT_LOCK;
+ break;
+ }
+
+ if (this->options & ONENAND_HAS_CONT_LOCK)
+ printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
+ if (this->options & ONENAND_HAS_UNLOCK_ALL)
+ printk(KERN_DEBUG "Chip support all block unlock\n");
+ if (this->options & ONENAND_HAS_2PLANE)
+ printk(KERN_DEBUG "Chip has 2 plane\n");
+}
+
/**
* onenand_print_device_info - Print device ID
* @param device device ID
*
* Print device ID
*/
-char * onenand_print_device_info(int device)
+char *onenand_print_device_info(int device, int version)
{
int vcc, demuxed, ddp, density;
char *dev_info = malloc(80);
+ char *p = dev_info;
vcc = device & ONENAND_DEVICE_VCC_MASK;
demuxed = device & ONENAND_DEVICE_IS_DEMUX;
ddp = device & ONENAND_DEVICE_IS_DDP;
density = device >> ONENAND_DEVICE_DENSITY_SHIFT;
- sprintf(dev_info, "%sOneNAND%s %dMB %sV 16-bit (0x%02x)",
+ p += sprintf(dev_info, "%sOneNAND%s %dMB %sV 16-bit (0x%02x)",
demuxed ? "" : "Muxed ",
ddp ? "(DDP)" : "",
(16 << density), vcc ? "2.65/3.3" : "1.8", device);
+ sprintf(p, "\nOneNAND version = 0x%04x", version);
+ printk("%s\n", dev_info);
+
return dev_info;
}
static const struct onenand_manufacturers onenand_manuf_ids[] = {
{ONENAND_MFR_SAMSUNG, "Samsung"},
- {ONENAND_MFR_UNKNOWN, "Unknown"}
};
/**
@@ -1678,19 +1953,24 @@ static const struct onenand_manufacturers onenand_manuf_ids[] = {
*/
static int onenand_check_maf(int manuf)
{
+ int size = ARRAY_SIZE(onenand_manuf_ids);
+ char *name;
int i;
- for (i = 0; onenand_manuf_ids[i].id; i++) {
+ for (i = 0; size; i++)
if (manuf == onenand_manuf_ids[i].id)
break;
- }
+
+ if (i < size)
+ name = onenand_manuf_ids[i].name;
+ else
+ name = "Unknown";
#ifdef ONENAND_DEBUG
- printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n",
- onenand_manuf_ids[i].name, manuf);
+ printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", name, manuf);
#endif
- return (i != ONENAND_MFR_UNKNOWN);
+ return i == size;
}
/**
@@ -1703,9 +1983,14 @@ static int onenand_check_maf(int manuf)
static int onenand_probe(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
- int bram_maf_id, bram_dev_id, maf_id, dev_id;
- int version_id;
+ int bram_maf_id, bram_dev_id, maf_id, dev_id, ver_id;
int density;
+ int syscfg;
+
+ /* Save system configuration 1 */
+ syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
+ /* Clear Sync. Burst Read mode to read BootRAM */
+ this->write_word((syscfg & ~ONENAND_SYS_CFG1_SYNC_READ), this->base + ONENAND_REG_SYS_CFG1);
/* Send the command for reading device ID from BootRAM */
this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM);
@@ -1714,19 +1999,23 @@ static int onenand_probe(struct mtd_info *mtd)
bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0);
bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2);
- /* Check manufacturer ID */
- if (onenand_check_maf(bram_maf_id))
- return -ENXIO;
-
/* Reset OneNAND to read default register values */
this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM);
/* Wait reset */
this->wait(mtd, FL_RESETING);
+ /* Restore system configuration 1 */
+ this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
+
+ /* Check manufacturer ID */
+ if (onenand_check_maf(bram_maf_id))
+ return -ENXIO;
+
/* Read manufacturer and device IDs from Register */
maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
+ ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
/* Check OneNAND device */
if (maf_id != bram_maf_id || dev_id != bram_dev_id)
@@ -1739,11 +2028,17 @@ static int onenand_probe(struct mtd_info *mtd)
}
/* Flash device information */
- mtd->name = onenand_print_device_info(dev_id);
+ mtd->name = onenand_print_device_info(dev_id, ver_id);
this->device_id = dev_id;
+ this->version_id = ver_id;
- density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+ density = onenand_get_density(dev_id);
this->chipsize = (16 << density) << 20;
+ /* Set density mask. it is used for DDP */
+ if (ONENAND_IS_DDP(this))
+ this->density_mask = (1 << (density + 6));
+ else
+ this->density_mask = 0;
/* OneNAND page size & block size */
/* The data buffer size is equal to page size */
@@ -1764,18 +2059,8 @@ static int onenand_probe(struct mtd_info *mtd)
mtd->size = this->chipsize;
- /* Version ID */
- version_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
-#ifdef ONENAND_DEBUG
- printk(KERN_DEBUG "OneNAND version = 0x%04x\n", version_id);
-#endif
-
- /* Lock scheme */
- if (density <= ONENAND_DEVICE_DENSITY_512Mb &&
- !(version_id >> ONENAND_VERSION_PROCESS_SHIFT)) {
- printk(KERN_INFO "Lock scheme is Continues Lock\n");
- this->options |= ONENAND_CONT_LOCK;
- }
+ /* Check OneNAND features */
+ onenand_check_features(mtd);
mtd->flags = MTD_CAP_NANDFLASH;
mtd->erase = onenand_erase;
@@ -1802,6 +2087,7 @@ static int onenand_probe(struct mtd_info *mtd)
*/
int onenand_scan(struct mtd_info *mtd, int maxchips)
{
+ int i;
struct onenand_chip *this = mtd->priv;
if (!this->read_word)
@@ -1813,12 +2099,21 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
this->command = onenand_command;
if (!this->wait)
this->wait = onenand_wait;
+ if (!this->bbt_wait)
+ this->bbt_wait = onenand_bbt_wait;
if (!this->read_bufferram)
this->read_bufferram = onenand_read_bufferram;
+ if (!this->read_spareram)
+ this->read_spareram = onenand_read_bufferram;
if (!this->write_bufferram)
this->write_bufferram = onenand_write_bufferram;
+ if (!this->block_markbad)
+ this->block_markbad = onenand_default_block_markbad;
+ if (!this->scan_bbt)
+ this->scan_bbt = onenand_default_bbt;
+
if (onenand_probe(mtd))
return -ENXIO;
@@ -1850,9 +2145,50 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
this->options |= ONENAND_OOBBUF_ALLOC;
}
- onenand_unlock(mtd, 0, mtd->size);
+ this->state = FL_READY;
+
+ /*
+ * Allow subpage writes up to oobsize.
+ */
+ switch (mtd->oobsize) {
+ case 64:
+ this->ecclayout = &onenand_oob_64;
+ mtd->subpage_sft = 2;
+ break;
+
+ case 32:
+ this->ecclayout = &onenand_oob_32;
+ mtd->subpage_sft = 1;
+ break;
+
+ default:
+ printk(KERN_WARNING "No OOB scheme defined for oobsize %d\n",
+ mtd->oobsize);
+ mtd->subpage_sft = 0;
+ /* To prevent kernel oops */
+ this->ecclayout = &onenand_oob_32;
+ break;
+ }
+
+ this->subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+ /*
+ * The number of bytes available for a client to place data into
+ * the out of band area
+ */
+ this->ecclayout->oobavail = 0;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES &&
+ this->ecclayout->oobfree[i].length; i++)
+ this->ecclayout->oobavail +=
+ this->ecclayout->oobfree[i].length;
+ mtd->oobavail = this->ecclayout->oobavail;
+
+ mtd->ecclayout = this->ecclayout;
+
+ /* Unlock whole block */
+ onenand_unlock_all(mtd);
- return onenand_default_bbt(mtd);
+ return this->scan_bbt(mtd);
}
/**
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index f6092b9..d538f95 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -3,7 +3,7 @@
*
* Bad Block Table support for the OneNAND driver
*
- * Copyright(c) 2005-2007 Samsung Electronics
+ * Copyright(c) 2005-2008 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
* TODO:
@@ -54,7 +54,7 @@ static int check_short_pattern(uint8_t * buf, int len, int paglen,
* @param buf temporary buffer
* @param bd descriptor for the good/bad block search pattern
* @param chip create the table for a specific chip, -1 read all chips.
- * Applies only if NAND_BBT_PERCHIP option is set
+ * Applies only if NAND_BBT_PERCHIP option is set
*
* Create a bad block table by scanning the device
* for the given good/bad block identify pattern
@@ -156,8 +156,8 @@ static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03;
MTDDEBUG (MTD_DEBUG_LEVEL2,
- "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
- (unsigned int)offs, block >> 1, res);
+ "onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+ (unsigned int)offs, block >> 1, res);
switch ((int)res) {
case 0x00:
diff --git a/drivers/mtd/onenand/onenand_uboot.c b/drivers/mtd/onenand/onenand_uboot.c
index 08082f3..4541b22 100644
--- a/drivers/mtd/onenand/onenand_uboot.c
+++ b/drivers/mtd/onenand/onenand_uboot.c
@@ -26,9 +26,17 @@ void onenand_init(void)
memset(&onenand_mtd, 0, sizeof(struct mtd_info));
memset(&onenand_chip, 0, sizeof(struct onenand_chip));
- onenand_chip.base = (void *) CONFIG_SYS_ONENAND_BASE;
onenand_mtd.priv = &onenand_chip;
+#ifdef CONFIG_USE_ONENAND_BOARD_INIT
+ /*
+ * It's used for some board init required
+ */
+ onenand_board_init(&onenand_mtd);
+#else
+ onenand_chip.base = (void *) CONFIG_SYS_ONENAND_BASE;
+#endif
+
onenand_scan(&onenand_mtd, 1);
puts("OneNAND: ");
diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
index d22cd35..50967ac 100644
--- a/include/asm-avr32/io.h
+++ b/include/asm-avr32/io.h
@@ -76,12 +76,12 @@ extern void __readwrite_bug(const char *fn);
#include <asm/addrspace.h>
/* virt_to_phys will only work when address is in P1 or P2 */
-static __inline__ unsigned long virt_to_phys(volatile void *address)
+static inline phys_addr_t virt_to_phys(volatile void *address)
{
return PHYSADDR(address);
}
-static __inline__ void * phys_to_virt(unsigned long address)
+static inline void *phys_to_virt(phys_addr_t address)
{
return (void *)P1SEGADDR(address);
}
@@ -125,9 +125,4 @@ static inline void unmap_physmem(void *vaddr, unsigned long len)
}
-static inline phys_addr_t virt_to_phys(void * vaddr)
-{
- return (phys_addr_t)(vaddr);
-}
-
#endif /* __ASM_AVR32_IO_H */
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index a694083..a11a9b8 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -150,7 +150,6 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define NAND_BIG_DELAY_US 25
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index a44f3e1..1e36660 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -219,7 +219,6 @@
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND0_CE (0x80000000 >> 1) /* our CE is GPIO1 */
#define CONFIG_SYS_NAND0_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index d0e2464..eebce38 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -157,7 +157,6 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define NAND_BIG_DELAY_US 25
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 729153c..85c0e61 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -411,7 +411,6 @@ int du440_phy_addr(int devnum);
* NAND FLASH
*/
#define CONFIG_SYS_MAX_NAND_DEVICE 2
-#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND0_ADDR + CONFIG_SYS_NAND0_CS, \
CONFIG_SYS_NAND1_ADDR + CONFIG_SYS_NAND1_CS}
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index d299044..b445fae 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -205,7 +205,6 @@
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
#define CONFIG_SYS_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 80e59bb..e5de8ef 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -209,7 +209,6 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define NAND_BIG_DELAY_US 25
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index b3c7046..1106b0d 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -149,7 +149,6 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define NAND_BIG_DELAY_US 25
diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
index a610ac9..fbcbddb 100644
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -275,7 +275,6 @@
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
#define NAND_DISABLE_CE(nand) do \
{ \
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index c207947..1f1586a 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -215,7 +215,6 @@
# define CONFIG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE
# define CONFIG_SYS_NAND_SIZE 1
# define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
-# define NAND_MAX_CHIPS 1
# define NAND_ALLOW_ERASE_ALL 1
# define CONFIG_JFFS2_NAND 1
# define CONFIG_JFFS2_DEV "nand0"
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index a1bc32a..1991687 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -215,7 +215,6 @@
# define CONFIG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE
# define CONFIG_SYS_NAND_SIZE 1
# define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
-# define NAND_MAX_CHIPS 1
# define NAND_ALLOW_ERASE_ALL 1
# define CONFIG_JFFS2_NAND 1
# define CONFIG_JFFS2_DEV "nand0"
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index fc3fa13..58a26e1 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -232,7 +232,6 @@
#endif
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CONFIG_CMD_NAND 1
#define CONFIG_NAND_FSL_ELBC 1
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 909353d..a04868e 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -166,7 +166,7 @@
#undef CONFIG_SYS_RAMBOOT
#endif
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
/*
@@ -223,15 +223,16 @@
*/
#define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_MTD_NAND_VERIFY_WRITE 1
+#define CONFIG_CMD_NAND 1
+#define CONFIG_NAND_FSL_ELBC 1
-#define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \
+#define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
| BR_V ) /* valid */
-#define CONFIG_SYS_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \
+#define CONFIG_SYS_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \
| OR_FCM_CSCT \
| OR_FCM_CST \
| OR_FCM_CHT \
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index a4f2862..c20f86a 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -211,7 +211,6 @@
#define CONFIG_CMD_NAND 1
#define CONFIG_NAND_FSL_UPM 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 28d442b..0dd6ef5 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -271,7 +271,6 @@
#define CONFIG_CMD_NAND 1
#define CONFIG_MTD_NAND_VERIFY_WRITE 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_NAND_FSL_ELBC 1
#define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 532c3df..505c48b 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -248,7 +248,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
CONFIG_SYS_NAND_BASE + 0x80000, \
CONFIG_SYS_NAND_BASE + 0xC0000}
#define CONFIG_SYS_MAX_NAND_DEVICE 4
-#define NAND_MAX_CHIPS 1
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CONFIG_CMD_NAND 1
#define CONFIG_NAND_FSL_ELBC 1
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 6c7a364..f84cc7e 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -267,7 +267,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
CONFIG_SYS_NAND_BASE + 0x80000,\
CONFIG_SYS_NAND_BASE + 0xC0000}
#define CONFIG_SYS_MAX_NAND_DEVICE 4
-#define NAND_MAX_CHIPS 1
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CONFIG_CMD_NAND 1
#define CONFIG_NAND_FSL_ELBC 1
diff --git a/include/configs/NC650.h b/include/configs/NC650.h
index 423ca71..0b97f0c 100644
--- a/include/configs/NC650.h
+++ b/include/configs/NC650.h
@@ -250,7 +250,6 @@
* NAND flash support
*/
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
/*-----------------------------------------------------------------------
* SYPCR - System Protection Control 11-9
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
index 34de947..2d04d89 100644
--- a/include/configs/NETPHONE.h
+++ b/include/configs/NETPHONE.h
@@ -514,7 +514,6 @@
#define ADDR_COLUMN_PAGE 3
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
/* ALE = PD17, CLE = PE18, CE = PE20, F_RY_BY = PE31 */
#define NAND_DISABLE_CE(nand) \
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index 004b3c8..34fdba5 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -633,7 +633,6 @@
#define ADDR_COLUMN_PAGE 3
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
/* ALE = PD3, CLE = PD4, CE = PD5, F_RY_BY = PC13 */
#define NAND_DISABLE_CE(nand) \
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
index 70995fa..4a27027 100644
--- a/include/configs/NETTA2.h
+++ b/include/configs/NETTA2.h
@@ -515,7 +515,6 @@
#define ADDR_COLUMN_PAGE 3
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
/* ALE = PD17, CLE = PE18, CE = PE20, F_RY_BY = PE31 */
#define NAND_DISABLE_CE(nand) \
diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h
index 87c920f..f97bdcb 100644
--- a/include/configs/NETVIA.h
+++ b/include/configs/NETVIA.h
@@ -411,7 +411,6 @@
#define ADDR_COLUMN_PAGE 3
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
#define NAND_DISABLE_CE(nand) \
do { \
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 11ce008..e9f1646 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -173,7 +173,6 @@
* NAND-FLASH stuff
*/
#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE}
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define NAND_BIG_DELAY_US 25
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index f9f1002..fc48bc1 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -505,7 +505,6 @@
* NAND FLASH
*----------------------------------------------------------------------*/
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
#define CONFIG_SYS_NAND_QUIET_TEST 1
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 09a9641..d4322b6 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -224,8 +224,6 @@
#define NAND_BIG_DELAY_US 25
#define CONFIG_SYS_MAX_NAND_DEVICE 2 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS 1
-
#define CONFIG_SYS_NAND0_CE (0x80000000 >> 1) /* our CE is GPIO1 */
#define CONFIG_SYS_NAND0_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
#define CONFIG_SYS_NAND0_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index 7fc455b..9857bf6 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -206,7 +206,6 @@
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
/* DFBUSY is available on Port C, bit 12; 0 if busy */
#define NAND_WAIT_READY(nand) \
diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index 1915a73..9cac696 100644
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -424,7 +424,6 @@
#define CONFIG_SYS_NAND3_BASE (CONFIG_SYS_NAND2_BASE + CONFIG_SYS_NAND_CS_DIST)
#define CONFIG_SYS_MAX_NAND_DEVICE 4 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE, \
CONFIG_SYS_NAND1_BASE, \
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 6d205a7..f5831eb 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -363,7 +363,6 @@
#define CONFIG_SYS_NAND3_BASE (CONFIG_SYS_NAND2_BASE + CONFIG_SYS_NAND_CS_DIST)
#define CONFIG_SYS_MAX_NAND_DEVICE 2 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS 1
#if (CONFIG_SYS_MAX_NAND_DEVICE == 1)
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE }
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 0bc2f68..83d0d56 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -264,7 +264,6 @@
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
#define NAND_WAIT_READY(nand) NF_WaitRB()
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index 10ef620..f173bcc 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -159,7 +159,6 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define NAND_BIG_DELAY_US 25
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index 01cdf3a..de6e12f 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -147,7 +147,6 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define NAND_BIG_DELAY_US 25
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index 52ccdb5..9ffd86b 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -262,7 +262,6 @@
* NAND FLASH
*----------------------------------------------------------------------*/
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index d63a1a0..e996bbd 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -97,7 +97,6 @@
#define DATAFLASH_TCHS (0x1 << 24)
/* NAND flash */
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 7ce8205..e6248e9 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -335,7 +335,6 @@
* NAND-FLASH stuff
*-----------------------------------------------------------------------*/
#define CONFIG_SYS_MAX_NAND_DEVICE 4
-#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
#define CONFIG_SYS_NAND_BASE 0xF0000000 /* NAND FLASH Base Address */
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE + 0, CONFIG_SYS_NAND_BASE + 2, \
CONFIG_SYS_NAND_BASE + 4, CONFIG_SYS_NAND_BASE + 6 }
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index b2baf1b..f1c5526 100644
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -118,7 +118,6 @@
#define CONFIG_SYS_MAX_FLASH_BANKS 1
/* NAND flash */
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index c7e83cc..5a980d3 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -129,7 +129,6 @@
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 1538929..4501cae 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -100,7 +100,6 @@
#define DATAFLASH_TCHS (0x1 << 24)
/* NAND flash */
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 0016b4f..668fe3b 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -111,7 +111,6 @@
#define DATAFLASH_TCHS (0x1 << 24)
/* NAND flash */
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index d9ebc87..c6603ff 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -123,7 +123,6 @@
#endif
/* NAND flash */
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 35fefc4..5bef1fe 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -104,7 +104,6 @@
#define CONFIG_SYS_NO_FLASH 1
/* NAND flash */
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index f3ffe1c..8c4127d 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -197,7 +197,6 @@
* NAND FLASH
*----------------------------------------------------------------------*/
#define CONFIG_SYS_MAX_NAND_DEVICE 2
-#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_ADDR + 2 }
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 1b54d3b..ac5aaa5 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -278,7 +278,6 @@
#define ADDR_COLUMN_PAGE 3
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
#define BFIN_NAND_READY PF3
#define NAND_WAIT_READY(nand) \
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index faf6304..d814012 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -234,7 +234,6 @@
* NAND-FLASH related
*----------------------------------------------------------------------*/
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
diff --git a/include/configs/csb637.h b/include/configs/csb637.h
index 2df77cf..761c0dc 100644
--- a/include/configs/csb637.h
+++ b/include/configs/csb637.h
@@ -131,7 +131,6 @@
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index 6885b2c..a727f56 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -127,7 +127,6 @@
#define CONFIG_SYS_NAND_BASE 0x02000000
#define CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS 1
#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
#define DEF_BOOTM ""
#elif defined(CONFIG_SYS_USE_NOR)
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 8d7bcf5..22d3808 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -89,7 +89,6 @@
#define CONFIG_SYS_NAND_BASE 0x02000000
#define CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS 1
#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
/*=====================*/
/* Board related stuff */
diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
index e9cd5a6..875bab6 100644
--- a/include/configs/davinci_sffsdr.h
+++ b/include/configs/davinci_sffsdr.h
@@ -85,7 +85,6 @@
#define CONFIG_SYS_NAND_BASE 0x02000000
#define CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS 1
#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
/* I2C switch definitions for PCA9543 chip */
#define CONFIG_SYS_I2C_PCA9543_ADDR 0x70
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index 381eeb7..47ab27a 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -122,7 +122,6 @@
#define CONFIG_SYS_NAND_BASE 0x02000000
#define CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS 1
#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
#define DEF_BOOTM ""
#elif defined(CONFIG_SYS_USE_NOR)
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 08b28ca..fd97b74 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -258,7 +258,6 @@
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NO_FLASH 1
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index b943f31..4d3ccf5 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -214,7 +214,6 @@
* NAND FLASH
*----------------------------------------------------------------------*/
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
diff --git a/include/configs/ml401.h b/include/configs/microblaze-generic.h
index c802dcb..4c6cc9f 100644
--- a/include/configs/ml401.h
+++ b/include/configs/microblaze-generic.h
@@ -25,32 +25,33 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#include "../board/xilinx/ml401/xparameters.h"
+#include "../board/xilinx/microblaze-generic/xparameters.h"
#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */
#define MICROBLAZE_V5 1
-#define CONFIG_ML401 1 /* ML401 Board */
/* uart */
#ifdef XILINX_UARTLITE_BASEADDR
-#define CONFIG_XILINX_UARTLITE
-#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
-#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
-#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
+ #define CONFIG_XILINX_UARTLITE
+ #define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
+ #define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
+ #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
+ #define CONSOLE_ARG "console=console=ttyUL0,115200\0"
#elif XILINX_UART16550_BASEADDR
-#define CONFIG_SYS_NS16550 1
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
-#define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
-#define CONFIG_BAUDRATE 115200
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+ #define CONFIG_SYS_NS16550 1
+ #define CONFIG_SYS_NS16550_SERIAL
+ #define CONFIG_SYS_NS16550_REG_SIZE -4
+ #define CONFIG_CONS_INDEX 1
+ #define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
+ #define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
+ #define CONFIG_BAUDRATE 115200
+
+ /* The following table includes the supported baudrates */
+ #define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+ #define CONSOLE_ARG "console=console=ttyS0,115200\0"
#else
-#error Undefined uart
+ #error Undefined uart
#endif
/* setting reset address */
@@ -58,44 +59,44 @@
/* ethernet */
#ifdef XILINX_EMAC_BASEADDR
-#define CONFIG_XILINX_EMAC 1
-#define CONFIG_SYS_ENET
-#else
-#ifdef XILINX_EMACLITE_BASEADDR
-#define CONFIG_XILINX_EMACLITE 1
-#define CONFIG_SYS_ENET
-#endif
+ #define CONFIG_XILINX_EMAC 1
+ #define CONFIG_SYS_ENET
+#elif XILINX_EMACLITE_BASEADDR
+ #define CONFIG_XILINX_EMACLITE 1
+ #define CONFIG_SYS_ENET
+#elif XILINX_LLTEMAC_BASEADDR
+ #define CONFIG_XILINX_LL_TEMAC 1
+ #define CONFIG_SYS_ENET
#endif
+
#undef ET_DEBUG
/* gpio */
#ifdef XILINX_GPIO_BASEADDR
-#define CONFIG_SYS_GPIO_0 1
-#define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
+ #define CONFIG_SYS_GPIO_0 1
+ #define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
#endif
/* interrupt controller */
#ifdef XILINX_INTC_BASEADDR
-#define CONFIG_SYS_INTC_0 1
-#define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
-#define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
+ #define CONFIG_SYS_INTC_0 1
+ #define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
+ #define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
#endif
/* timer */
#ifdef XILINX_TIMER_BASEADDR
-#if (XILINX_TIMER_IRQ != -1)
-#define CONFIG_SYS_TIMER_0 1
-#define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
-#define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
-#define FREQUENCE XILINX_CLOCK_FREQ
-#define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
-#endif
-#else
-#ifdef XILINX_CLOCK_FREQ
-#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
+ #if (XILINX_TIMER_IRQ != -1)
+ #define CONFIG_SYS_TIMER_0 1
+ #define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
+ #define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
+ #define FREQUENCE XILINX_CLOCK_FREQ
+ #define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
+ #endif
+#elif XILINX_CLOCK_FREQ
+ #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
#else
-#error BAD CLOCK FREQ
-#endif
+ #error BAD CLOCK FREQ
#endif
/* FSL */
/* #define CONFIG_SYS_FSL_2 */
@@ -160,7 +161,7 @@
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* ?empty sector */
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
- #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
#define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */
#ifdef RAMENV
@@ -170,9 +171,9 @@
#else /* !RAMENV */
#define CONFIG_ENV_IS_IN_FLASH 1
- #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
- #define CONFIG_ENV_SIZE 0x40000
+ #define CONFIG_ENV_SIZE 0x20000
#endif /* !RAMBOOT */
#else /* !FLASH */
/* ENV in RAM */
@@ -193,6 +194,18 @@
#define CONFIG_DOS_PARTITION
#endif
+#if defined(XILINX_USE_ICACHE)
+ #define CONFIG_ICACHE
+#else
+ #undef CONFIG_ICACHE
+#endif
+
+#if defined(XILINX_USE_DCACHE)
+ #define CONFIG_DCACHE
+#else
+ #undef CONFIG_DCACHE
+#endif
+
/*
* BOOTP options
*/
@@ -207,9 +220,15 @@
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MFSL
+#define CONFIG_CMD_ECHO
+
+#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
+ #define CONFIG_CMD_CACHE
+#else
+ #undef CONFIG_CMD_CACHE
+#endif
#ifndef CONFIG_SYS_ENET
#undef CONFIG_CMD_NET
@@ -233,7 +252,9 @@
#define CONFIG_CMD_SAVES
#endif
#else
+ #undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_FLASH
+ #undef CONFIG_CMD_JFFS2
#endif
#if defined(CONFIG_CMD_JFFS2)
@@ -253,11 +274,11 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_LOAD_ADDR 0x12000000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START /* default load address */
-#define CONFIG_BOOTDELAY 30
+#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
#define CONFIG_BOOTARGS "root=romfs"
-#define CONFIG_HOSTNAME "ml401"
+#define CONFIG_HOSTNAME XILINX_BOARD_NAME
#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
#define CONFIG_IPADDR 192.168.0.3
#define CONFIG_SERVERIP 192.168.0.5
@@ -268,7 +289,7 @@
#define CONFIG_SYS_USR_EXCEP /* user exception */
#define CONFIG_SYS_HZ 1000
-#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo"
+#define CONFIG_PREBOOT "echo U-BOOT for $(hostname);setenv preboot;echo"
#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\
"nor0=ml401-0\0"\
diff --git a/include/configs/netstar.h b/include/configs/netstar.h
index dda6597..fab22d1 100644
--- a/include/configs/netstar.h
+++ b/include/configs/netstar.h
@@ -120,7 +120,6 @@
* NAND flash
*/
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23)
#define NAND_ALLOW_ERASE_ALL 1
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index d11868e..92df0b4 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -163,7 +163,6 @@
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u16 *)0x6800A07C = d;} while(0)
#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u16 *)0x6800A080 = d;} while(0)
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index 8b7890e..f8aac1a 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -264,7 +264,6 @@
* NAND-FLASH stuff
*/
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_BASE 0x51000000 /* NAND FLASH Base Address */
#endif
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index 0f7fca3..3ea854b 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -224,7 +224,6 @@
#define CONFIG_SYS_NAND_CE 24 /* our CE is GPIO24 */
#define CONFIG_SYS_NAND_CLE 31 /* our CLE is GPIO31 */
#define CONFIG_SYS_NAND_ALE 30 /* our ALE is GPIO30 */
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#endif
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
index d7a6ae4..bf4a14e 100644
--- a/include/configs/sbc2410x.h
+++ b/include/configs/sbc2410x.h
@@ -209,7 +209,6 @@
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
#define NAND_WAIT_READY(nand) NF_WaitRB()
#define NAND_DISABLE_CE(nand) NF_SetCE(NFCE_HIGH)
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index d152a96..515b097 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -424,7 +424,6 @@ extern unsigned long offsetOfEnvironment;
* NAND-FLASH stuff
*/
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_BASE 0x77D00000
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 9321bdc..a3e2fce 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -373,7 +373,6 @@
* NAND FLASH
*/
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
index 1784cc6..57c82d1 100644
--- a/include/configs/smdk6400.h
+++ b/include/configs/smdk6400.h
@@ -227,7 +227,6 @@
/* NAND configuration */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x70200010
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_S3C_NAND_HWECC
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index cbf04e3..becd13e 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -186,7 +186,6 @@
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_FPGA_BASE + 0x70)
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_CMD_NAND
/* LIME GDC */
diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h
index bc078cf..5a5f772 100644
--- a/include/configs/stxxtc.h
+++ b/include/configs/stxxtc.h
@@ -464,7 +464,6 @@
#define ADDR_COLUMN_PAGE 3
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
/* ALE = PC15, CLE = PB23, CE = PA7, F_RY_BY = PA6 */
#define NAND_DISABLE_CE(nand) \
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index 53397d8..f30eca1 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -227,7 +227,6 @@
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_NO_FLASH 1
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index abf8f1a..7db2546 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -18,8 +18,8 @@
#define __LINUX_MTD_BBM_H
/* The maximum number of NAND chips in an array */
-#ifndef NAND_MAX_CHIPS
-#define NAND_MAX_CHIPS 8
+#ifndef CONFIG_SYS_NAND_MAX_CHIPS
+#define CONFIG_SYS_NAND_MAX_CHIPS 1
#endif
/**
@@ -48,10 +48,10 @@
*/
struct nand_bbt_descr {
int options;
- int pages[NAND_MAX_CHIPS];
+ int pages[CONFIG_SYS_NAND_MAX_CHIPS];
int offs;
int veroffs;
- uint8_t version[NAND_MAX_CHIPS];
+ uint8_t version[CONFIG_SYS_NAND_MAX_CHIPS];
int len;
int maxblocks;
int reserved_block_code;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 24ad2bd..a4ad571 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -46,11 +46,6 @@ extern void nand_release (struct mtd_info *mtd);
/* Internal helper for board drivers which need to override command function */
extern void nand_wait_ready(struct mtd_info *mtd);
-/* The maximum number of NAND chips in an array */
-#ifndef NAND_MAX_CHIPS
-#define NAND_MAX_CHIPS 8
-#endif
-
/* This constant declares the max. oobsize / page, which
* is supported now. If you add a chip with bigger oobsize/page
* adjust this accordingly.
@@ -477,10 +472,6 @@ struct nand_manufacturers {
extern struct nand_flash_dev nand_flash_ids[];
extern struct nand_manufacturers nand_manuf_ids[];
-#ifndef NAND_MAX_CHIPS
-#define NAND_MAX_CHIPS 8
-#endif
-
extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
extern int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
extern int nand_default_bbt(struct mtd_info *mtd);
diff --git a/include/linux/mtd/nand_legacy.h b/include/linux/mtd/nand_legacy.h
index 99eafbb..4334448 100644
--- a/include/linux/mtd/nand_legacy.h
+++ b/include/linux/mtd/nand_legacy.h
@@ -40,6 +40,11 @@
#error This module is for the legacy NAND support
#endif
+/* The maximum number of NAND chips in an array */
+#ifndef CONFIG_SYS_NAND_MAX_CHIPS
+#define CONFIG_SYS_NAND_MAX_CHIPS 1
+#endif
+
/*
* Standard NAND flash commands
*/
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 4467c2b..2597e34 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -30,14 +30,10 @@ extern void onenand_release (struct mtd_info *mtd);
/**
* struct onenand_bufferram - OneNAND BufferRAM Data
- * @param block block address in BufferRAM
- * @param page page address in BufferRAM
- * @param valid valid flag
+ * @param blockpage block & page address in BufferRAM
*/
struct onenand_bufferram {
- int block;
- int page;
- int valid;
+ int blockpage;
};
/**
@@ -70,6 +66,8 @@ struct onenand_chip {
void __iomem *base;
unsigned int chipsize;
unsigned int device_id;
+ unsigned int version_id;
+ unsigned int density_mask;
unsigned int options;
unsigned int erase_shift;
@@ -81,26 +79,36 @@ struct onenand_chip {
unsigned int bufferram_index;
struct onenand_bufferram bufferram[MAX_BUFFERRAM];
- int (*command) (struct mtd_info * mtd, int cmd, loff_t address,
+ int (*command) (struct mtd_info *mtd, int cmd, loff_t address,
size_t len);
- int (*wait) (struct mtd_info * mtd, int state);
- int (*read_bufferram) (struct mtd_info * mtd, int area,
+ int (*wait) (struct mtd_info *mtd, int state);
+ int (*bbt_wait) (struct mtd_info *mtd, int state);
+ int (*read_bufferram) (struct mtd_info *mtd, loff_t addr, int area,
unsigned char *buffer, int offset, size_t count);
- int (*write_bufferram) (struct mtd_info * mtd, int area,
+ int (*read_spareram) (struct mtd_info *mtd, loff_t addr, int area,
+ unsigned char *buffer, int offset, size_t count);
+ int (*write_bufferram) (struct mtd_info *mtd, loff_t addr, int area,
const unsigned char *buffer, int offset,
size_t count);
- unsigned short (*read_word) (void __iomem * addr);
- void (*write_word) (unsigned short value, void __iomem * addr);
- void (*mmcontrol) (struct mtd_info * mtd, int sync_read);
+ unsigned short (*read_word) (void __iomem *addr);
+ void (*write_word) (unsigned short value, void __iomem *addr);
+ void (*mmcontrol) (struct mtd_info *mtd, int sync_read);
int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
int (*scan_bbt)(struct mtd_info *mtd);
+ unsigned char *main_buf;
+ unsigned char *spare_buf;
+#ifdef DONT_USE_UBOOT
+ spinlock_t chip_lock;
+ wait_queue_head_t wq;
+#endif
int state;
- unsigned char *page_buf;
- unsigned char *oob_buf;
+ unsigned char *page_buf;
+ unsigned char *oob_buf;
struct nand_oobinfo *autooob;
- struct nand_ecclayout *ecclayout;
+ int subpagesize;
+ struct nand_ecclayout *ecclayout;
void *bbm;
@@ -125,7 +133,9 @@ struct onenand_chip {
/*
* Options bits
*/
-#define ONENAND_CONT_LOCK (0x0001)
+#define ONENAND_HAS_CONT_LOCK (0x0001)
+#define ONENAND_HAS_UNLOCK_ALL (0x0002)
+#define ONENAND_HAS_2PLANE (0x0004)
#define ONENAND_PAGEBUF_ALLOC (0x1000)
#define ONENAND_OOBBUF_ALLOC (0x2000)
@@ -133,7 +143,6 @@ struct onenand_chip {
* OneNAND Flash Manufacturer ID Codes
*/
#define ONENAND_MFR_SAMSUNG 0xec
-#define ONENAND_MFR_UNKNOWN 0x00
/**
* struct nand_manufacturers - NAND Flash Manufacturer ID Structure
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
index a245e14..fc63380 100644
--- a/include/linux/mtd/onenand_regs.h
+++ b/include/linux/mtd/onenand_regs.h
@@ -119,6 +119,7 @@
#define ONENAND_CMD_UNLOCK (0x23)
#define ONENAND_CMD_LOCK (0x2A)
#define ONENAND_CMD_LOCK_TIGHT (0x2C)
+#define ONENAND_CMD_UNLOCK_ALL (0x27)
#define ONENAND_CMD_ERASE (0x94)
#define ONENAND_CMD_RESET (0xF0)
#define ONENAND_CMD_READID (0x90)
diff --git a/include/nand.h b/include/nand.h
index b4f316f..065a42c 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -31,6 +31,8 @@ extern void nand_init(void);
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
+extern int board_nand_init(struct nand_chip *nand);
+
typedef struct mtd_info nand_info_t;
extern int nand_curr_device;
diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h
index e960257..5a4fded 100644
--- a/include/onenand_uboot.h
+++ b/include/onenand_uboot.h
@@ -15,25 +15,29 @@
#define __UBOOT_ONENAND_H
#include <linux/types.h>
-#include <linux/mtd/mtd.h>
struct mtd_info;
struct erase_info;
+struct onenand_chip;
extern struct mtd_info onenand_mtd;
+/* board */
+extern void onenand_board_init(struct mtd_info *);
+
/* Functions */
extern void onenand_init(void);
extern int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t * retlen, u_char * buf);
-extern int onenand_read_oob(struct mtd_info *mtd, loff_t from,
- struct mtd_oob_ops *ops);
+extern int onenand_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops);
extern int onenand_write(struct mtd_info *mtd, loff_t from, size_t len,
size_t * retlen, const u_char * buf);
extern int onenand_erase(struct mtd_info *mtd, struct erase_info *instr);
-extern int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len);
+extern char *onenand_print_device_info(int device, int version);
-extern char *onenand_print_device_info(int device);
+/* S3C64xx */
+extern void s3c64xx_onenand_init(struct mtd_info *);
+extern void s3c64xx_set_width_regs(struct onenand_chip *);
#endif /* __UBOOT_ONENAND_H */
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index 05e66e3..ddf8144 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -257,6 +257,7 @@ void board_init_f(ulong bootflag)
{
ulong addr;
bd_t *bd;
+ char buf[32];
#ifdef CONFIG_BOARD_EARLY_INIT_F
serial_early_puts("Board early init flash\n");
@@ -315,8 +316,9 @@ void board_init_f(ulong bootflag)
checkboard();
timer_init();
- printf("Clock: VCO: %lu MHz, Core: %lu MHz, System: %lu MHz\n",
- get_vco() / 1000000, get_cclk() / 1000000, get_sclk() / 1000000);
+ printf("Clock: VCO: %s MHz, ", strmhz(buf, get_vco()));
+ printf("Core: %s MHz, ", strmhz(buf, get_cclk()));
+ printf("System: %s MHz\n", strmhz(buf, get_sclk()));
printf("RAM: ");
print_size(initdram(0), "\n");
diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c
index 4f48341..30d7641 100644
--- a/lib_microblaze/board.c
+++ b/lib_microblaze/board.c
@@ -112,6 +112,10 @@ void board_init (void)
#if defined(CONFIG_CMD_FLASH)
ulong flash_size = 0;
#endif
+#if defined(CONFIG_CMD_NET)
+ char *s, *e;
+ int i;
+#endif
asm ("nop"); /* FIXME gd is not initialize - wait */
memset ((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE);
gd->bd = (bd_t *) (gd + 1); /* At end of global data */
@@ -132,11 +136,34 @@ void board_init (void)
}
}
+ puts ("SDRAM :\n");
+ printf ("\t\tIcache:%s\n", icache_status() ? "OK" : "FAIL");
+ printf ("\t\tDcache:%s\n", dcache_status() ? "OK" : "FAIL");
+ printf ("\tU-Boot Start:0x%08x\n", TEXT_BASE);
+
#if defined(CONFIG_CMD_FLASH)
+ puts ("FLASH: ");
bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
if (0 < (flash_size = flash_init ())) {
bd->bi_flashsize = flash_size;
bd->bi_flashoffset = CONFIG_SYS_FLASH_BASE + flash_size;
+# ifdef CONFIG_SYS_FLASH_CHECKSUM
+ print_size (flash_size, "");
+ /*
+ * Compute and print flash CRC if flashchecksum is set to 'y'
+ *
+ * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
+ */
+ s = getenv ("flashchecksum");
+ if (s && (*s == 'y')) {
+ printf (" CRC: %08X",
+ crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
+ );
+ }
+ putc ('\n');
+# else /* !CONFIG_SYS_FLASH_CHECKSUM */
+ print_size (flash_size, "\n");
+# endif /* CONFIG_SYS_FLASH_CHECKSUM */
} else {
puts ("Flash init FAILED");
bd->bi_flashstart = 0;
@@ -146,10 +173,9 @@ void board_init (void)
#endif
#if defined(CONFIG_CMD_NET)
- char *s, *e;
- int i;
/* board MAC address */
s = getenv ("ethaddr");
+ printf ("MAC:%s\n",s);
for (i = 0; i < 6; ++i) {
bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
if (s)
diff --git a/lib_microblaze/cache.c b/lib_microblaze/cache.c
index a2f7493..4b2e8e3 100644
--- a/lib_microblaze/cache.c
+++ b/lib_microblaze/cache.c
@@ -26,6 +26,18 @@
void flush_cache (ulong addr, ulong size)
{
- /* MicroBlaze have write thruough cache. nothing to do. */
- return;
+ int i;
+ for (i = 0; i < size; i += 4)
+ asm volatile (
+#ifdef CONFIG_ICACHE
+ "wic %0, r0;"
+#endif
+ "nop;"
+#ifdef CONFIG_DCACHE
+ "wdc %0, r0;"
+#endif
+ "nop;"
+ :
+ : "r" (addr + i)
+ : "memory");
}
diff --git a/nand_spl/board/freescale/mpc8313erdb/Makefile b/nand_spl/board/freescale/mpc8313erdb/Makefile
index 3da1b1f..1a8f6ff 100644
--- a/nand_spl/board/freescale/mpc8313erdb/Makefile
+++ b/nand_spl/board/freescale/mpc8313erdb/Makefile
@@ -34,7 +34,8 @@ AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
SOBJS = start.o ticks.o
-COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o time.o
+COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o \
+ time.o cache.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -79,6 +80,9 @@ $(obj)ns16550.c:
$(obj)nand_init.c:
ln -sf $(SRCTREE)/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
+$(obj)cache.c:
+ ln -sf $(SRCTREE)/lib_ppc/cache.c $(obj)cache.c
+
$(obj)time.c:
ln -sf $(SRCTREE)/lib_ppc/time.c $(obj)time.c
diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c
index 4a961ea..0d0c44e 100644
--- a/nand_spl/nand_boot_fsl_elbc.c
+++ b/nand_spl/nand_boot_fsl_elbc.c
@@ -143,6 +143,11 @@ void nand_boot(void)
* Jump to U-Boot image
*/
puts("transfering control\n");
+ /*
+ * Clean d-cache and invalidate i-cache, to
+ * make sure that no stale data is executed.
+ */
+ flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
uboot();
}