summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG12
-rw-r--r--MAINTAINERS8
-rwxr-xr-xMAKEALL25
-rw-r--r--Makefile17
-rw-r--r--README4
-rw-r--r--board/amcc/taihu/taihu.c16
-rw-r--r--board/atmel/at91cap9adk/Makefile4
-rw-r--r--board/atmel/at91cap9adk/at91cap9adk.c100
-rw-r--r--board/atmel/at91cap9adk/nand.c3
-rw-r--r--board/atmel/at91sam9260ek/Makefile4
-rw-r--r--board/atmel/at91sam9260ek/at91sam9260ek.c7
-rw-r--r--board/atmel/at91sam9260ek/nand.c3
-rw-r--r--board/atmel/at91sam9260ek/u-boot.lds57
-rw-r--r--board/atmel/at91sam9261ek/Makefile57
-rw-r--r--board/atmel/at91sam9261ek/at91sam9261ek.c258
-rw-r--r--board/atmel/at91sam9261ek/config.mk1
-rw-r--r--board/atmel/at91sam9261ek/led.c78
-rw-r--r--board/atmel/at91sam9261ek/nand.c79
-rw-r--r--board/atmel/at91sam9261ek/partition.c40
-rw-r--r--board/atmel/at91sam9263ek/Makefile57
-rw-r--r--board/atmel/at91sam9263ek/at91sam9263ek.c305
-rw-r--r--board/atmel/at91sam9263ek/config.mk1
-rw-r--r--board/atmel/at91sam9263ek/led.c78
-rw-r--r--board/atmel/at91sam9263ek/nand.c79
-rw-r--r--board/atmel/at91sam9263ek/partition.c (renamed from cpu/at32ap/pm.c)45
-rw-r--r--board/atmel/at91sam9rlek/Makefile57
-rw-r--r--board/atmel/at91sam9rlek/at91sam9rlek.c215
-rw-r--r--board/atmel/at91sam9rlek/config.mk1
-rw-r--r--board/atmel/at91sam9rlek/led.c77
-rw-r--r--board/atmel/at91sam9rlek/nand.c79
-rw-r--r--board/atmel/at91sam9rlek/partition.c39
-rw-r--r--board/atmel/atngw100/atngw100.c27
-rw-r--r--board/atmel/atngw100/u-boot.lds9
-rw-r--r--board/atmel/atstk1000/atstk1000.c54
-rw-r--r--board/atmel/atstk1000/flash.c6
-rw-r--r--board/atmel/atstk1000/u-boot.lds9
-rw-r--r--board/dbau1x00/dbau1x00.c2
-rw-r--r--board/freescale/mpc8349emds/mpc8349emds.c25
-rw-r--r--board/gth2/gth2.c2
-rw-r--r--board/pb1x00/pb1x00.c2
-rw-r--r--board/qemu-mips/qemu-mips.c6
-rw-r--r--board/quad100hd/Makefile51
-rw-r--r--board/quad100hd/config.mk24
-rw-r--r--board/quad100hd/nand.c79
-rw-r--r--board/quad100hd/quad100hd.c93
-rw-r--r--board/quad100hd/u-boot.lds133
-rw-r--r--board/sacsng/sacsng.c35
-rw-r--r--board/ssv/adnpesc1/adnpesc1.c27
-rw-r--r--common/Makefile2
-rw-r--r--common/cmd_df.c37
-rw-r--r--common/cmd_log.c8
-rw-r--r--common/cmd_nand.c2
-rw-r--r--common/cmd_nvedit.c3
-rw-r--r--common/cmd_sf.c191
-rw-r--r--common/cmd_spi.c42
-rw-r--r--common/dlmalloc.c3
-rw-r--r--common/env_common.c3
-rw-r--r--common/env_nand.c3
-rw-r--r--common/env_sf.c131
-rw-r--r--common/image.c10
-rw-r--r--common/lcd.c78
-rw-r--r--common/main.c6
-rw-r--r--common/soft_i2c.c1
-rw-r--r--common/soft_spi.c124
-rw-r--r--cpu/74xx_7xx/start.S6
-rw-r--r--cpu/arm926ejs/at91sam9/config.mk1
-rw-r--r--cpu/arm926ejs/at91sam9/u-boot.lds (renamed from board/atmel/at91cap9adk/u-boot.lds)0
-rw-r--r--cpu/arm926ejs/at91sam9/usb.c8
-rw-r--r--cpu/at32ap/Makefile20
-rw-r--r--cpu/at32ap/at32ap700x/Makefile2
-rw-r--r--cpu/at32ap/at32ap700x/clk.c68
-rw-r--r--cpu/at32ap/at32ap700x/gpio.c43
-rw-r--r--cpu/at32ap/at32ap700x/sm.h (renamed from cpu/at32ap/sm.h)0
-rw-r--r--cpu/at32ap/atmel_mci.c12
-rw-r--r--cpu/at32ap/cpu.c50
-rw-r--r--cpu/at32ap/entry.S64
-rw-r--r--cpu/at32ap/exception.c3
-rw-r--r--cpu/at32ap/hsdramc.c102
-rw-r--r--cpu/at32ap/interrupts.c16
-rw-r--r--cpu/at32ap/start.S129
-rw-r--r--cpu/mips/cpu.c10
-rw-r--r--cpu/mpc512x/traps.c8
-rw-r--r--cpu/mpc83xx/start.S6
-rw-r--r--cpu/mpc86xx/cpu.c4
-rw-r--r--cpu/nios/spi.c79
-rw-r--r--cpu/ppc4xx/commproc.c26
-rw-r--r--disk/part.c4
-rw-r--r--drivers/hwmon/lm75.c13
-rw-r--r--drivers/mtd/cfi_flash.c2
-rw-r--r--drivers/mtd/nand/nand_util.c7
-rw-r--r--drivers/mtd/spi/Makefile47
-rw-r--r--drivers/mtd/spi/atmel.c362
-rw-r--r--drivers/mtd/spi/spi_flash.c162
-rw-r--r--drivers/mtd/spi/spi_flash_internal.h45
-rw-r--r--drivers/net/dm9000x.c2
-rw-r--r--drivers/net/macb.c6
-rw-r--r--drivers/rtc/ds1306.c67
-rw-r--r--drivers/rtc/mc13783-rtc.c43
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/atmel_spi.c210
-rw-r--r--drivers/spi/atmel_spi.h95
-rw-r--r--drivers/spi/mpc8xxx_spi.c54
-rw-r--r--drivers/spi/mxc_spi.c88
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/atmel_lcdfb.c160
-rw-r--r--fs/jffs2/jffs2_1pass.c3
-rw-r--r--include/ACEX1K.h2
-rw-r--r--include/asm-arm/arch-at91sam9/at91_pmc.h5
-rw-r--r--include/asm-arm/arch-at91sam9/at91cap9.h14
-rw-r--r--include/asm-arm/arch-at91sam9/at91sam9261.h105
-rw-r--r--include/asm-arm/arch-at91sam9/at91sam9261_matrix.h64
-rw-r--r--include/asm-arm/arch-at91sam9/at91sam9263.h127
-rw-r--r--include/asm-arm/arch-at91sam9/at91sam9263_matrix.h129
-rw-r--r--include/asm-arm/arch-at91sam9/at91sam9rl.h115
-rw-r--r--include/asm-arm/arch-at91sam9/at91sam9rl_matrix.h96
-rw-r--r--include/asm-arm/arch-at91sam9/clk.h6
-rw-r--r--include/asm-arm/arch-at91sam9/hardware.h20
-rw-r--r--include/asm-avr32/arch-at32ap700x/chip-features.h1
-rw-r--r--include/asm-avr32/arch-at32ap700x/clk.h10
-rw-r--r--include/asm-avr32/arch-at32ap700x/gpio.h4
-rw-r--r--include/asm-avr32/arch-at32ap700x/hmatrix.h61
-rw-r--r--include/asm-avr32/arch-at32ap700x/hmatrix2.h232
-rw-r--r--include/asm-avr32/arch-at32ap700x/memory-map.h20
-rw-r--r--include/asm-avr32/hmatrix-common.h131
-rw-r--r--include/asm-avr32/sdram.h27
-rw-r--r--include/asm-avr32/sections.h7
-rw-r--r--include/asm-avr32/u-boot.h11
-rw-r--r--include/asm-mips/errno.h143
-rw-r--r--include/asm-mips/mipsregs.h1405
-rw-r--r--include/asm-ppc/bitops.h2
-rw-r--r--include/asm-ppc/mmu.h7
-rw-r--r--include/atmel_lcdc.h177
-rw-r--r--include/common.h11
-rw-r--r--include/configs/Alaska8220.h2
-rw-r--r--include/configs/BC3450.h2
-rw-r--r--include/configs/CPCI750.h2
-rw-r--r--include/configs/IceCube.h2
-rw-r--r--include/configs/MPC8313ERDB.h2
-rw-r--r--include/configs/MPC8315ERDB.h1
-rw-r--r--include/configs/MPC8323ERDB.h1
-rw-r--r--include/configs/MPC832XEMDS.h2
-rw-r--r--include/configs/MPC8349EMDS.h1
-rw-r--r--include/configs/MPC8349ITX.h1
-rw-r--r--include/configs/MPC8360EMDS.h2
-rw-r--r--include/configs/MPC8360ERDK.h2
-rw-r--r--include/configs/MPC837XEMDS.h1
-rw-r--r--include/configs/MPC837XERDB.h2
-rw-r--r--include/configs/MPC8610HPCD.h1
-rw-r--r--include/configs/MPC8641HPCN.h1
-rw-r--r--include/configs/PM520.h2
-rw-r--r--include/configs/TB5200.h2
-rw-r--r--include/configs/TOP5200.h2
-rw-r--r--include/configs/TQM5200.h2
-rw-r--r--include/configs/TQM834x.h2
-rw-r--r--include/configs/Total5200.h2
-rw-r--r--include/configs/Yukon8220.h2
-rw-r--r--include/configs/ads5121.h2
-rw-r--r--include/configs/aev.h2
-rw-r--r--include/configs/at91cap9adk.h37
-rw-r--r--include/configs/at91sam9260ek.h25
-rw-r--r--include/configs/at91sam9261ek.h202
-rw-r--r--include/configs/at91sam9263ek.h206
-rw-r--r--include/configs/at91sam9rlek.h175
-rw-r--r--include/configs/atngw100.h26
-rw-r--r--include/configs/atstk1002.h19
-rw-r--r--include/configs/atstk1003.h15
-rw-r--r--include/configs/atstk1004.h16
-rw-r--r--include/configs/atstk1006.h203
-rw-r--r--include/configs/canmb.h2
-rw-r--r--include/configs/cm5200.h2
-rw-r--r--include/configs/cpci5200.h2
-rw-r--r--include/configs/hmi1001.h2
-rw-r--r--include/configs/imx31_litekit.h3
-rw-r--r--include/configs/inka4x0.h2
-rw-r--r--include/configs/jupiter.h2
-rw-r--r--include/configs/mcc200.h2
-rw-r--r--include/configs/mecp5200.h2
-rw-r--r--include/configs/motionpro.h1
-rw-r--r--include/configs/mpc7448hpc2.h2
-rw-r--r--include/configs/munices.h1
-rw-r--r--include/configs/mx31ads.h3
-rw-r--r--include/configs/o2dnt.h2
-rw-r--r--include/configs/p3mx.h1
-rw-r--r--include/configs/pf5200.h1
-rw-r--r--include/configs/quad100hd.h298
-rw-r--r--include/configs/sbc8349.h2
-rw-r--r--include/configs/smmaco4.h2
-rw-r--r--include/configs/sorcery.h2
-rw-r--r--include/configs/spieval.h2
-rw-r--r--include/configs/uc101.h2
-rw-r--r--include/configs/v38b.h2
-rw-r--r--include/lcd.h30
-rw-r--r--include/linux/mtd/nand.h4
-rw-r--r--include/logbuff.h1
-rw-r--r--include/onenand_uboot.h5
-rw-r--r--include/spi.h150
-rw-r--r--include/spi_flash.h70
-rw-r--r--lib_arm/board.c49
-rw-r--r--lib_avr32/memset.S2
-rw-r--r--lib_mips/board.c13
-rw-r--r--lib_ppc/bat_rw.c173
-rw-r--r--lib_ppc/board.c11
-rw-r--r--lib_sh/board.c2
-rw-r--r--net/eth.c3
-rw-r--r--post/board/lwmon5/fpga.c50
-rw-r--r--tools/Makefile4
-rw-r--r--tools/logos/atmel.bmpbin0 -> 26334 bytes
207 files changed, 8590 insertions, 1279 deletions
diff --git a/CHANGELOG b/CHANGELOG
index ce36c37..ccebd4e 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -7221,7 +7221,7 @@ Date: Mon Mar 3 11:57:23 2008 +0000
Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
- Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
+ Signed-off-by: Bernhard Nemec <bnemec@ganssloser.com>
commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
Author: Kim B. Heino <Kim.Heino@bluegiga.com>
@@ -8451,7 +8451,7 @@ Date: Mon Feb 18 14:01:56 2008 -0600
86xx: Convert sbc8641d to use libfdt.
This is the proper fix for a missing closing brace in the function
- ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
+ ft_cpu_setup() noticed by joe.hamman@embeddedspecialties.com.
The ft_cpu_setup() function in mpc8641hpcn.c should have been
removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
but was missed. Only, the sbc8641d was nominally still using it.
@@ -8846,7 +8846,7 @@ Date: Fri Feb 22 11:40:50 2008 +0000
We already have a vendor subdir for Atmel, so we should use it.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
commit 6d0943a6be99977d6d853d51749e9963d68eb192
Author: Andreas Engel <andreas.engel@ericsson.com>
@@ -8896,8 +8896,8 @@ Date: Thu Jan 3 21:15:56 2008 +0000
AT91CAP9 support : MACB changes
- Signed-off-by: Stelian Pop <stelian <at> popies.net>
- Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
commit 6afcabf11d7321850f4feaadfee841488ace54c5
Author: Stelian Pop <stelian@popies.net>
@@ -8913,7 +8913,7 @@ Date: Wed Jan 30 21:15:54 2008 +0000
AT91CAP9 support : cpu/ files
- Signed-off-by: Stelian Pop <stelian <at> popies.net>
+ Signed-off-by: Stelian Pop <stelian@popies.net>
commit fa506a926cec348805143576c941f8e61b333cc0
Author: Stelian Pop <stelian@popies.net>
diff --git a/MAINTAINERS b/MAINTAINERS
index ac7572c..d3dfd48 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -204,6 +204,10 @@ Klaus Heydeck <heydeck@kieback-peter.de>
KUP4K MPC855
KUP4X MPC859
+Gary Jennejohn <garyj@denx.de>
+
+ quad100hd PPC405EP
+
Murray Jensen <Murray.Jensen@csiro.au>
cogent_mpc8xx MPC8xx
@@ -538,6 +542,9 @@ Stelian Pop <stelian.pop@leadtechdesign.com>
at91cap9adk ARM926EJS (AT91CAP9 SoC)
at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
+ at91sam9261ek ARM926EJS (AT91SAM9261 SoC)
+ at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
+ at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
Stefan Roese <sr@denx.de>
@@ -695,6 +702,7 @@ Haavard Skinnemoen <hskinnemoen@atmel.com>
ATSTK1002 AT32AP7000
ATSTK1003 AT32AP7001
ATSTK1004 AT32AP7002
+ ATSTK1006 AT32AP7000
ATNGW100 AT32AP7000
#########################################################################
diff --git a/MAKEALL b/MAKEALL
index 0674069..3cb1d24 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -219,6 +219,7 @@ LIST_4xx=" \
PMC405 \
PMC440 \
PPChameleonEVB \
+ quad100hd \
rainier \
sbc405 \
sc3 \
@@ -461,6 +462,9 @@ LIST_ARM9=" \
at91cap9adk \
at91rm9200dk \
at91sam9260ek \
+ at91sam9261ek \
+ at91sam9263ek \
+ at91sam9rlek \
cmc_pu2 \
ap920t \
ap922_XA10 \
@@ -521,6 +525,24 @@ LIST_ARM11=" \
"
#########################################################################
+## AT91 Systems
+#########################################################################
+
+LIST_at91=" \
+ at91cap9adk \
+ at91rm9200dk \
+ at91sam9260ek \
+ at91sam9261ek \
+ at91sam9263ek \
+ at91sam9rlek \
+ cmc_pu2 \
+ csb637 \
+ kb9202 \
+ mp2usb \
+ m501sk \
+"
+
+#########################################################################
## Xscale Systems
#########################################################################
@@ -697,6 +719,7 @@ LIST_avr32=" \
atstk1002 \
atstk1003 \
atstk1004 \
+ atstk1006 \
atngw100 \
"
@@ -765,7 +788,7 @@ build_target() {
for arg in $@
do
case "$arg" in
- arm|SA|ARM7|ARM9|ARM10|ARM11|ixp|pxa \
+ arm|SA|ARM7|ARM9|ARM10|ARM11|at91|ixp|pxa \
|avr32 \
|blackfin \
|coldfire \
diff --git a/Makefile b/Makefile
index 3401203..cc988e1 100644
--- a/Makefile
+++ b/Makefile
@@ -224,6 +224,7 @@ LIBS += drivers/mtd/libmtd.a
LIBS += drivers/mtd/nand/libnand.a
LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
LIBS += drivers/mtd/onenand/libonenand.a
+LIBS += drivers/mtd/spi/libspi_flash.a
LIBS += drivers/net/libnet.a
LIBS += drivers/net/sk98lin/libsk98lin.a
LIBS += drivers/pci/libpci.a
@@ -390,6 +391,7 @@ TAG_SUBDIRS += drivers/mtd
TAG_SUBDIRS += drivers/mtd/nand
TAG_SUBDIRS += drivers/mtd/nand_legacy
TAG_SUBDIRS += drivers/mtd/onenand
+TAG_SUBDIRS += drivers/mtd/spi
TAG_SUBDIRS += drivers/net
TAG_SUBDIRS += drivers/net/sk98lin
TAG_SUBDIRS += drivers/pci
@@ -1391,6 +1393,9 @@ PPChameleonEVB_HI_33_config: unconfig
}
@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+quad100hd_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
+
sbc405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
@@ -2335,6 +2340,15 @@ shannon_config : unconfig
at91rm9200dk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
+at91sam9261ek_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91sam9
+
+at91sam9263ek_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91sam9
+
+at91sam9rlek_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91sam9
+
cmc_pu2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
@@ -2879,6 +2893,9 @@ atstk1003_config : unconfig
atstk1004_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+atstk1006_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
atngw100_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
diff --git a/README b/README
index f14fb7b..78344f8 100644
--- a/README
+++ b/README
@@ -961,6 +961,10 @@ The following options need to be configured:
display); also select one of the supported displays
by defining one of these:
+ CONFIG_ATMEL_LCD:
+
+ HITACHI TX09D70VM1CCA, 3.5", 240x320.
+
CONFIG_NEC_NL6448AC33:
NEC NL6448AC33-18. Active, color, single scan.
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index eedde59..891b4d9 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -165,16 +165,20 @@ unsigned char spi_read(void)
return (unsigned char)gpio_read_in_bit(SPI_DIN_GPIO15);
}
-void taihu_spi_chipsel(int cs)
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
- gpio_write_bit(SPI_CS_GPIO0, cs);
+ return bus == 0 && cs == 0;
}
-spi_chipsel_type spi_chipsel[]= {
- taihu_spi_chipsel
-};
+void spi_cs_activate(struct spi_slave *slave)
+{
+ gpio_write_bit(SPI_CS_GPIO0, 1);
+}
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ gpio_write_bit(SPI_CS_GPIO0, 0);
+}
#ifdef CONFIG_PCI
static unsigned char int_lines[32] = {
diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile
index e33af76..f2b9c12 100644
--- a/board/atmel/at91cap9adk/Makefile
+++ b/board/atmel/at91cap9adk/Makefile
@@ -2,6 +2,10 @@
# (C) Copyright 2003-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
# See file CREDITS for list of people who contributed to this
# project.
#
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index 5de52b9..a3eaf19 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -30,6 +30,8 @@
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
#include <net.h>
#endif
@@ -70,6 +72,33 @@ static void at91cap9_serial_hw_init(void)
#endif
}
+static void at91cap9_slowclock_hw_init(void)
+{
+ /*
+ * On AT91CAP9 revC CPUs, the slow clock can be based on an
+ * internal impreciseRC oscillator or an external 32kHz oscillator.
+ * Switch to the latter.
+ */
+#define ARCH_ID_AT91CAP9_REVB 0x399
+#define ARCH_ID_AT91CAP9_REVC 0x601
+ if (at91_sys_read(AT91_PMC_VER) == ARCH_ID_AT91CAP9_REVC) {
+ unsigned i, tmp = at91_sys_read(AT91_SCKCR);
+ if ((tmp & AT91CAP9_SCKCR_OSCSEL) == AT91CAP9_SCKCR_OSCSEL_RC) {
+ extern void timer_init(void);
+ timer_init();
+ tmp |= AT91CAP9_SCKCR_OSC32EN;
+ at91_sys_write(AT91_SCKCR, tmp);
+ for (i = 0; i < 1200; i++)
+ udelay(1000);
+ tmp |= AT91CAP9_SCKCR_OSCSEL_32;
+ at91_sys_write(AT91_SCKCR, tmp);
+ udelay(200);
+ tmp &= ~AT91CAP9_SCKCR_RCEN;
+ at91_sys_write(AT91_SCKCR, tmp);
+ }
+ }
+}
+
static void at91cap9_nor_hw_init(void)
{
unsigned long csa;
@@ -116,7 +145,12 @@ static void at91cap9_nand_hw_init(void)
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
- AT91_SMC_DBW_8 | AT91_SMC_TDF_(1));
+#ifdef CFG_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(1));
at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
@@ -228,6 +262,65 @@ static void at91cap9_uhp_hw_init(void)
}
#endif
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ vl_col: 240,
+ vl_row: 320,
+ vl_clk: 4965000,
+ vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
+ ATMEL_LCDC_INVFRAME_INVERTED,
+ vl_bpix: 3,
+ vl_tft: 1,
+ vl_hsync_len: 5,
+ vl_left_margin: 1,
+ vl_right_margin:33,
+ vl_vsync_len: 1,
+ vl_upper_margin:1,
+ vl_lower_margin:0,
+ mmio: AT91CAP9_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
+}
+
+static void at91cap9_lcd_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
+ at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_LCDC);
+
+ gd->fb_base = 0;
+}
+#endif
+
int board_init(void)
{
/* Enable Ctrlc */
@@ -239,6 +332,7 @@ int board_init(void)
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
at91cap9_serial_hw_init();
+ at91cap9_slowclock_hw_init();
at91cap9_nor_hw_init();
#ifdef CONFIG_CMD_NAND
at91cap9_nand_hw_init();
@@ -252,7 +346,9 @@ int board_init(void)
#ifdef CONFIG_USB_OHCI_NEW
at91cap9_uhp_hw_init();
#endif
-
+#ifdef CONFIG_LCD
+ at91cap9_lcd_hw_init();
+#endif
return 0;
}
diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c
index 28091a4..0432ef1 100644
--- a/board/atmel/at91cap9adk/nand.c
+++ b/board/atmel/at91cap9adk/nand.c
@@ -63,6 +63,9 @@ static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd, int cmd)
int board_nand_init(struct nand_chip *nand)
{
nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+ nand->options = NAND_BUSWIDTH_16;
+#endif
nand->hwcontrol = at91cap9adk_nand_hwcontrol;
nand->chip_delay = 20;
diff --git a/board/atmel/at91sam9260ek/Makefile b/board/atmel/at91sam9260ek/Makefile
index e6e4082..f93540a 100644
--- a/board/atmel/at91sam9260ek/Makefile
+++ b/board/atmel/at91sam9260ek/Makefile
@@ -2,6 +2,10 @@
# (C) Copyright 2003-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
# See file CREDITS for list of people who contributed to this
# project.
#
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index b30aad8..ef4d486 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -90,7 +90,12 @@ static void at91sam9260ek_nand_hw_init(void)
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
- AT91_SMC_DBW_8 | AT91_SMC_TDF_(2));
+#ifdef CFG_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(2));
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c
index 7c1e6ab..9738f0f 100644
--- a/board/atmel/at91sam9260ek/nand.c
+++ b/board/atmel/at91sam9260ek/nand.c
@@ -68,6 +68,9 @@ static int at91sam9260ek_nand_ready(struct mtd_info *mtd)
int board_nand_init(struct nand_chip *nand)
{
nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+ nand->options = NAND_BUSWIDTH_16;
+#endif
nand->hwcontrol = at91sam9260ek_nand_hwcontrol;
nand->dev_ready = at91sam9260ek_nand_ready;
nand->chip_delay = 20;
diff --git a/board/atmel/at91sam9260ek/u-boot.lds b/board/atmel/at91sam9260ek/u-boot.lds
deleted file mode 100644
index 996f401..0000000
--- a/board/atmel/at91sam9260ek/u-boot.lds
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- cpu/arm926ejs/start.o (.text)
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .got : { *(.got) }
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = ALIGN(4);
- __bss_start = .;
- .bss : { *(.bss) }
- _end = .;
-}
diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile
new file mode 100644
index 0000000..7702a9c
--- /dev/null
+++ b/board/atmel/at91sam9261ek/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += at91sam9261ek.o
+COBJS-y += led.o
+COBJS-y += partition.o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
new file mode 100644
index 0000000..3de234c
--- /dev/null
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -0,0 +1,258 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91sam9261_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
+#include <net.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void at91sam9261ek_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+ at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+#endif
+
+#ifdef CONFIG_USART1
+ at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+#endif
+
+#ifdef CONFIG_USART2
+ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+#endif
+
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+#endif
+}
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9261ek_nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA,
+ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) |
+ AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CFG_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(1));
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(AT91_PIN_PC15, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(AT91_PIN_PC14, 1);
+
+ at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */
+}
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+static void at91sam9261ek_spi_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */
+
+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_SPI0);
+}
+#endif
+
+#ifdef CONFIG_DRIVER_DM9000
+static void at91sam9261ek_dm9000_hw_init(void)
+{
+ /* Configure SMC CS2 for DM9000 */
+ at91_sys_write(AT91_SMC_SETUP(2),
+ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(2),
+ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) |
+ AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
+ at91_sys_write(AT91_SMC_CYCLE(2),
+ AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
+ at91_sys_write(AT91_SMC_MODE(2),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+ AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
+ AT91_SMC_TDF_(1));
+
+ /* Configure Reset signal as output */
+ at91_set_gpio_output(AT91_PIN_PC10, 0);
+
+ /* Configure Interrupt pin as input, no pull-up */
+ at91_set_gpio_input(AT91_PIN_PC11, 0);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ vl_col: 240,
+ vl_row: 320,
+ vl_clk: 4965000,
+ vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
+ ATMEL_LCDC_INVFRAME_INVERTED,
+ vl_bpix: 3,
+ vl_tft: 1,
+ vl_hsync_len: 5,
+ vl_left_margin: 1,
+ vl_right_margin:33,
+ vl_vsync_len: 1,
+ vl_upper_margin:1,
+ vl_lower_margin:0,
+ mmio: AT91SAM9261_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
+}
+
+static void at91sam9261ek_lcd_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */
+ at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */
+ at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */
+ at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
+ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
+
+ at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
+
+ gd->fb_base = AT91SAM9261_SRAM_BASE;
+}
+#endif
+
+int board_init(void)
+{
+ /* Enable Ctrlc */
+ console_init_f();
+
+ /* arch number of AT91SAM9261EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ at91sam9261ek_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ at91sam9261ek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ at91sam9261ek_spi_hw_init();
+#endif
+#ifdef CONFIG_DRIVER_DM9000
+ at91sam9261ek_dm9000_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ at91sam9261ek_lcd_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_DRIVER_DM9000
+ /*
+ * Initialize ethernet HW addr prior to starting Linux,
+ * needed for nfsroot
+ */
+ eth_init(gd->bd);
+#endif
+}
+#endif
diff --git a/board/atmel/at91sam9261ek/config.mk b/board/atmel/at91sam9261ek/config.mk
new file mode 100644
index 0000000..ff2cfd1
--- /dev/null
+++ b/board/atmel/at91sam9261ek/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9261ek/led.c b/board/atmel/at91sam9261ek/led.c
new file mode 100644
index 0000000..eb2bb23
--- /dev/null
+++ b/board/atmel/at91sam9261ek/led.c
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+#define RED_LED AT91_PIN_PA23 /* this is the power led */
+#define GREEN_LED AT91_PIN_PA13 /* this is the user1 led */
+#define YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */
+
+void red_LED_on(void)
+{
+ at91_set_gpio_value(RED_LED, 1);
+}
+
+void red_LED_off(void)
+{
+ at91_set_gpio_value(RED_LED, 0);
+}
+
+void green_LED_on(void)
+{
+ at91_set_gpio_value(GREEN_LED, 0);
+}
+
+void green_LED_off(void)
+{
+ at91_set_gpio_value(GREEN_LED, 1);
+}
+
+void yellow_LED_on(void)
+{
+ at91_set_gpio_value(YELLOW_LED, 0);
+}
+
+void yellow_LED_off(void)
+{
+ at91_set_gpio_value(YELLOW_LED, 1);
+}
+
+
+void coloured_LED_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA);
+
+ at91_set_gpio_output(RED_LED, 1);
+ at91_set_gpio_output(GREEN_LED, 1);
+ at91_set_gpio_output(YELLOW_LED, 1);
+
+ at91_set_gpio_value(RED_LED, 0);
+ at91_set_gpio_value(GREEN_LED, 1);
+ at91_set_gpio_value(YELLOW_LED, 1);
+}
diff --git a/board/atmel/at91sam9261ek/nand.c b/board/atmel/at91sam9261ek/nand.c
new file mode 100644
index 0000000..35b26db
--- /dev/null
+++ b/board/atmel/at91sam9261ek/nand.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
+
+#include <nand.h>
+
+/*
+ * hardware specific access to control-lines
+ */
+#define MASK_ALE (1 << 22) /* our ALE is AD22 */
+#define MASK_CLE (1 << 21) /* our CLE is AD21 */
+
+static void at91sam9261ek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ struct nand_chip *this = mtd->priv;
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ IO_ADDR_W |= MASK_CLE;
+ break;
+ case NAND_CTL_SETALE:
+ IO_ADDR_W |= MASK_ALE;
+ break;
+ case NAND_CTL_CLRNCE:
+ at91_set_gpio_value(AT91_PIN_PC14, 1);
+ break;
+ case NAND_CTL_SETNCE:
+ at91_set_gpio_value(AT91_PIN_PC14, 0);
+ break;
+ }
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
+}
+
+static int at91sam9261ek_nand_ready(struct mtd_info *mtd)
+{
+ return at91_get_gpio_value(AT91_PIN_PC15);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+ nand->options = NAND_BUSWIDTH_16;
+#endif
+ nand->hwcontrol = at91sam9261ek_nand_hwcontrol;
+ nand->dev_ready = at91sam9261ek_nand_ready;
+ nand->chip_delay = 20;
+
+ return 0;
+}
diff --git a/board/atmel/at91sam9261ek/partition.c b/board/atmel/at91sam9261ek/partition.c
new file mode 100644
index 0000000..975be17
--- /dev/null
+++ b/board/atmel/at91sam9261ek/partition.c
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
+ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+ {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
+};
diff --git a/board/atmel/at91sam9263ek/Makefile b/board/atmel/at91sam9263ek/Makefile
new file mode 100644
index 0000000..5adb0bc
--- /dev/null
+++ b/board/atmel/at91sam9263ek/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += at91sam9263ek.o
+COBJS-y += led.o
+COBJS-y += partition.o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
new file mode 100644
index 0000000..ba7fc71
--- /dev/null
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -0,0 +1,305 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam9263_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void at91sam9263ek_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+ at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+#endif
+
+#ifdef CONFIG_USART1
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+#endif
+
+#ifdef CONFIG_USART2
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+#endif
+
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+#endif
+}
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9263ek_nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+ at91_sys_write(AT91_MATRIX_EBI0CSA,
+ csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CFG_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(2));
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA |
+ 1 << AT91SAM9263_ID_PIOCDE);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(AT91_PIN_PA22, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(AT91_PIN_PD15, 1);
+}
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+static void at91sam9263ek_spi_hw_init(void)
+{
+ at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */
+
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void at91sam9263ek_macb_hw_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
+
+ /*
+ * Disable pull-up on:
+ * RXDV (PC25) => PHY normal mode (not Test mode)
+ * ERX0 (PE25) => PHY ADDR0
+ * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0
+ *
+ * PHY has internal pull-down
+ */
+ writel(pin_to_mask(AT91_PIN_PC25),
+ pin_to_controller(AT91_PIN_PC0) + PIO_PUDR);
+ writel(pin_to_mask(AT91_PIN_PE25) |
+ pin_to_mask(AT91_PIN_PE26),
+ pin_to_controller(AT91_PIN_PE0) + PIO_PUDR);
+
+ /* Need to reset PHY -> 500ms reset */
+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+ AT91_RSTC_ERSTL | (0x0D << 8) |
+ AT91_RSTC_URSTEN);
+
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+ /* Wait for end hardware reset */
+ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+
+ /* Re-enable pull-up */
+ writel(pin_to_mask(AT91_PIN_PC25),
+ pin_to_controller(AT91_PIN_PC0) + PIO_PUER);
+ writel(pin_to_mask(AT91_PIN_PE25) |
+ pin_to_mask(AT91_PIN_PE26),
+ pin_to_controller(AT91_PIN_PE0) + PIO_PUER);
+
+ at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
+
+#ifndef CONFIG_RMII
+ at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+#endif
+
+}
+#endif
+
+#ifdef CONFIG_USB_OHCI_NEW
+static void at91sam9263ek_uhp_hw_init(void)
+{
+ /* Enable VBus on UHP ports */
+ at91_set_gpio_output(AT91_PIN_PA21, 0);
+ at91_set_gpio_output(AT91_PIN_PA24, 0);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ vl_col: 240,
+ vl_row: 320,
+ vl_clk: 4965000,
+ vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
+ ATMEL_LCDC_INVFRAME_INVERTED,
+ vl_bpix: 3,
+ vl_tft: 1,
+ vl_hsync_len: 5,
+ vl_left_margin: 1,
+ vl_right_margin:33,
+ vl_vsync_len: 1,
+ vl_upper_margin:1,
+ vl_lower_margin:0,
+ mmio: AT91SAM9263_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 1); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 0); /* power down */
+}
+
+static void at91sam9263ek_lcd_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
+
+ gd->fb_base = AT91SAM9263_SRAM0_BASE;
+}
+#endif
+
+int board_init(void)
+{
+ /* Enable Ctrlc */
+ console_init_f();
+
+ /* arch number of AT91SAM9263EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9263EK;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ at91sam9263ek_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ at91sam9263ek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ at91sam9263ek_spi_hw_init();
+#endif
+#ifdef CONFIG_MACB
+ at91sam9263ek_macb_hw_init();
+#endif
+#ifdef CONFIG_USB_OHCI_NEW
+ at91sam9263ek_uhp_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ at91sam9263ek_lcd_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+ /*
+ * Initialize ethernet HW addr prior to starting Linux,
+ * needed for nfsroot
+ */
+ eth_init(gd->bd);
+#endif
+}
+#endif
diff --git a/board/atmel/at91sam9263ek/config.mk b/board/atmel/at91sam9263ek/config.mk
new file mode 100644
index 0000000..ff2cfd1
--- /dev/null
+++ b/board/atmel/at91sam9263ek/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9263ek/led.c b/board/atmel/at91sam9263ek/led.c
new file mode 100644
index 0000000..eb8d6ca
--- /dev/null
+++ b/board/atmel/at91sam9263ek/led.c
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+#define RED_LED AT91_PIN_PB7 /* this is the power led */
+#define GREEN_LED AT91_PIN_PB8 /* this is the user1 led */
+#define YELLOW_LED AT91_PIN_PC29 /* this is the user2 led */
+
+void red_LED_on(void)
+{
+ at91_set_gpio_value(RED_LED, 1);
+}
+
+void red_LED_off(void)
+{
+ at91_set_gpio_value(RED_LED, 0);
+}
+
+void green_LED_on(void)
+{
+ at91_set_gpio_value(GREEN_LED, 0);
+}
+
+void green_LED_off(void)
+{
+ at91_set_gpio_value(GREEN_LED, 1);
+}
+
+void yellow_LED_on(void)
+{
+ at91_set_gpio_value(YELLOW_LED, 0);
+}
+
+void yellow_LED_off(void)
+{
+ at91_set_gpio_value(YELLOW_LED, 1);
+}
+
+void coloured_LED_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB |
+ 1 << AT91SAM9263_ID_PIOCDE);
+
+ at91_set_gpio_output(RED_LED, 1);
+ at91_set_gpio_output(GREEN_LED, 1);
+ at91_set_gpio_output(YELLOW_LED, 1);
+
+ at91_set_gpio_value(RED_LED, 0);
+ at91_set_gpio_value(GREEN_LED, 1);
+ at91_set_gpio_value(YELLOW_LED, 1);
+}
diff --git a/board/atmel/at91sam9263ek/nand.c b/board/atmel/at91sam9263ek/nand.c
new file mode 100644
index 0000000..5079972
--- /dev/null
+++ b/board/atmel/at91sam9263ek/nand.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
+
+#include <nand.h>
+
+/*
+ * hardware specific access to control-lines
+ */
+#define MASK_ALE (1 << 21) /* our ALE is AD21 */
+#define MASK_CLE (1 << 22) /* our CLE is AD22 */
+
+static void at91sam9263ek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ struct nand_chip *this = mtd->priv;
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ IO_ADDR_W |= MASK_CLE;
+ break;
+ case NAND_CTL_SETALE:
+ IO_ADDR_W |= MASK_ALE;
+ break;
+ case NAND_CTL_CLRNCE:
+ at91_set_gpio_value(AT91_PIN_PD15, 1);
+ break;
+ case NAND_CTL_SETNCE:
+ at91_set_gpio_value(AT91_PIN_PD15, 0);
+ break;
+ }
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
+}
+
+static int at91sam9263ek_nand_ready(struct mtd_info *mtd)
+{
+ return at91_get_gpio_value(AT91_PIN_PA22);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+ nand->options = NAND_BUSWIDTH_16;
+#endif
+ nand->hwcontrol = at91sam9263ek_nand_hwcontrol;
+ nand->dev_ready = at91sam9263ek_nand_ready;
+ nand->chip_delay = 20;
+
+ return 0;
+}
diff --git a/cpu/at32ap/pm.c b/board/atmel/at91sam9263ek/partition.c
index c78d547..eb1a724 100644
--- a/cpu/at32ap/pm.c
+++ b/board/atmel/at91sam9263ek/partition.c
@@ -1,8 +1,6 @@
/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -18,25 +16,24 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
+ *
*/
#include <common.h>
-
-#ifdef CFG_POWER_MANAGER
-#include <asm/errno.h>
-#include <asm/io.h>
-
-#include <asm/arch/memory-map.h>
-
-#include "sm.h"
-
-
-#ifdef CONFIG_PLL
-#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
-#else
-#define MAIN_CLK_RATE (CFG_OSC0_HZ)
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-
-#endif /* CFG_POWER_MANAGER */
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
+ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
+};
diff --git a/board/atmel/at91sam9rlek/Makefile b/board/atmel/at91sam9rlek/Makefile
new file mode 100644
index 0000000..a86a926
--- /dev/null
+++ b/board/atmel/at91sam9rlek/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += at91sam9rlek.o
+COBJS-y += led.o
+COBJS-y += partition.o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
new file mode 100644
index 0000000..10423d2
--- /dev/null
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -0,0 +1,215 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/at91sam9rl_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void at91sam9rlek_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+ at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+#endif
+
+#ifdef CONFIG_USART1
+ at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+#endif
+
+#ifdef CONFIG_USART2
+ at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+#endif
+
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+#endif
+}
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9rlek_nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA,
+ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) |
+ AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CFG_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(1));
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(AT91_PIN_PD17, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(AT91_PIN_PB6, 1);
+
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */
+}
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+static void at91sam9rlek_spi_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PA28, 0); /* SPI0_NPCS0 */
+
+ at91_set_A_periph(AT91_PIN_PA25, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA26, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_SPI);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ vl_col: 240,
+ vl_row: 320,
+ vl_clk: 4965000,
+ vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
+ ATMEL_LCDC_INVFRAME_INVERTED,
+ vl_bpix: 3,
+ vl_tft: 1,
+ vl_hsync_len: 5,
+ vl_left_margin: 1,
+ vl_right_margin:33,
+ vl_vsync_len: 1,
+ vl_upper_margin:1,
+ vl_lower_margin:0,
+ mmio: AT91SAM9RL_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
+}
+static void at91sam9rlek_lcd_hw_init(void)
+{
+ at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */
+ at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */
+ at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */
+ at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */
+ at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */
+ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */
+ at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */
+ at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */
+ at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_LCDC);
+
+ gd->fb_base = 0;
+}
+#endif
+
+
+int board_init(void)
+{
+ /* Enable Ctrlc */
+ console_init_f();
+
+ /* arch number of AT91SAM9RLEK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ at91sam9rlek_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ at91sam9rlek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ at91sam9rlek_spi_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ at91sam9rlek_lcd_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
+}
diff --git a/board/atmel/at91sam9rlek/config.mk b/board/atmel/at91sam9rlek/config.mk
new file mode 100644
index 0000000..ff2cfd1
--- /dev/null
+++ b/board/atmel/at91sam9rlek/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9rlek/led.c b/board/atmel/at91sam9rlek/led.c
new file mode 100644
index 0000000..8a7d8e0
--- /dev/null
+++ b/board/atmel/at91sam9rlek/led.c
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+#define RED_LED AT91_PIN_PD14 /* this is the power led */
+#define GREEN_LED AT91_PIN_PD15 /* this is the user1 led */
+#define YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */
+
+void red_LED_on(void)
+{
+ at91_set_gpio_value(RED_LED, 1);
+}
+
+void red_LED_off(void)
+{
+ at91_set_gpio_value(RED_LED, 0);
+}
+
+void green_LED_on(void)
+{
+ at91_set_gpio_value(GREEN_LED, 0);
+}
+
+void green_LED_off(void)
+{
+ at91_set_gpio_value(GREEN_LED, 1);
+}
+
+void yellow_LED_on(void)
+{
+ at91_set_gpio_value(YELLOW_LED, 0);
+}
+
+void yellow_LED_off(void)
+{
+ at91_set_gpio_value(YELLOW_LED, 1);
+}
+
+void coloured_LED_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD);
+
+ at91_set_gpio_output(RED_LED, 1);
+ at91_set_gpio_output(GREEN_LED, 1);
+ at91_set_gpio_output(YELLOW_LED, 1);
+
+ at91_set_gpio_value(RED_LED, 0);
+ at91_set_gpio_value(GREEN_LED, 1);
+ at91_set_gpio_value(YELLOW_LED, 1);
+}
diff --git a/board/atmel/at91sam9rlek/nand.c b/board/atmel/at91sam9rlek/nand.c
new file mode 100644
index 0000000..5af1a31
--- /dev/null
+++ b/board/atmel/at91sam9rlek/nand.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
+
+#include <nand.h>
+
+/*
+ * hardware specific access to control-lines
+ */
+#define MASK_ALE (1 << 21) /* our ALE is AD21 */
+#define MASK_CLE (1 << 22) /* our CLE is AD22 */
+
+static void at91sam9rlek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ struct nand_chip *this = mtd->priv;
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ IO_ADDR_W |= MASK_CLE;
+ break;
+ case NAND_CTL_SETALE:
+ IO_ADDR_W |= MASK_ALE;
+ break;
+ case NAND_CTL_CLRNCE:
+ at91_set_gpio_value(AT91_PIN_PB6, 1);
+ break;
+ case NAND_CTL_SETNCE:
+ at91_set_gpio_value(AT91_PIN_PB6, 0);
+ break;
+ }
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
+}
+
+static int at91sam9rlek_nand_ready(struct mtd_info *mtd)
+{
+ return at91_get_gpio_value(AT91_PIN_PD17);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+ nand->options = NAND_BUSWIDTH_16;
+#endif
+ nand->hwcontrol = at91sam9rlek_nand_hwcontrol;
+ nand->dev_ready = at91sam9rlek_nand_ready;
+ nand->chip_delay = 20;
+
+ return 0;
+}
diff --git a/board/atmel/at91sam9rlek/partition.c b/board/atmel/at91sam9rlek/partition.c
new file mode 100644
index 0000000..eb1a724
--- /dev/null
+++ b/board/atmel/at91sam9rlek/partition.c
@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
+ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
+};
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index 1ccbe2c..c649855 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -25,12 +25,12 @@
#include <asm/sdram.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/hmatrix2.h>
+#include <asm/arch/hmatrix.h>
DECLARE_GLOBAL_DATA_PTR;
-static const struct sdram_info sdram = {
- .phys_addr = CFG_SDRAM_BASE,
+static const struct sdram_config sdram_config = {
+ .data_bits = SDRAM_DATA_16BIT,
.row_bits = 13,
.col_bits = 9,
.bank_bits = 2,
@@ -47,8 +47,8 @@ static const struct sdram_info sdram = {
int board_early_init_f(void)
{
- /* Set the SDRAM_ENABLE bit in the HEBI SFR */
- hmatrix2_writel(SFR4, 1 << 1);
+ /* Enable SDRAM in the EBI mux */
+ hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
gpio_enable_ebi();
gpio_enable_usart1();
@@ -66,7 +66,22 @@ int board_early_init_f(void)
long int initdram(int board_type)
{
- return sdram_init(&sdram);
+ unsigned long expected_size;
+ unsigned long actual_size;
+ void *sdram_base;
+
+ sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+ expected_size = sdram_init(sdram_base, &sdram_config);
+ actual_size = get_ram_size(sdram_base, expected_size);
+
+ unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+ if (expected_size != actual_size)
+ printf("Warning: Only %u of %u MiB SDRAM is working\n",
+ actual_size >> 20, expected_size >> 20);
+
+ return actual_size;
}
void board_init_info(void)
diff --git a/board/atmel/atngw100/u-boot.lds b/board/atmel/atngw100/u-boot.lds
index 34e347a..e736adf 100644
--- a/board/atmel/atngw100/u-boot.lds
+++ b/board/atmel/atngw100/u-boot.lds
@@ -29,17 +29,10 @@ SECTIONS
. = 0;
_text = .;
.text : {
+ *(.exception.text)
*(.text)
*(.text.*)
}
-
- . = ALIGN(32);
- __flashprog_start = .;
- .flashprog : {
- *(.flashprog)
- }
- . = ALIGN(32);
- __flashprog_end = .;
_etext = .;
.rodata : {
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 28f64c4..33bdba6 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -25,13 +25,39 @@
#include <asm/sdram.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/hmatrix2.h>
+#include <asm/arch/hmatrix.h>
DECLARE_GLOBAL_DATA_PTR;
-static const struct sdram_info sdram = {
- .phys_addr = CFG_SDRAM_BASE,
+static const struct sdram_config sdram_config = {
+#if defined(CONFIG_ATSTK1006)
+ /* Dual MT48LC16M16A2-7E (64 MB) on daughterboard */
+ .data_bits = SDRAM_DATA_32BIT,
+ .row_bits = 13,
+ .col_bits = 9,
+ .bank_bits = 2,
+ .cas = 2,
+ .twr = 2,
+ .trc = 7,
+ .trp = 2,
+ .trcd = 2,
+ .tras = 4,
+ .txsr = 7,
+ /* 7.81 us */
+ .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
+#else
+ /* MT48LC2M32B2P-5 (8 MB) on motherboard */
+#ifdef CONFIG_ATSTK1004
+ .data_bits = SDRAM_DATA_16BIT,
+#else
+ .data_bits = SDRAM_DATA_32BIT,
+#endif
+#ifdef CONFIG_ATSTK1000_16MB_SDRAM
+ /* MT48LC4M32B2P-6 (16 MB) on mod'ed motherboard */
+ .row_bits = 12,
+#else
.row_bits = 11,
+#endif
.col_bits = 8,
.bank_bits = 2,
.cas = 3,
@@ -43,12 +69,13 @@ static const struct sdram_info sdram = {
.txsr = 5,
/* 15.6 us */
.refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
+#endif
};
int board_early_init_f(void)
{
- /* Set the SDRAM_ENABLE bit in the HEBI SFR */
- hmatrix2_writel(SFR4, 1 << 1);
+ /* Enable SDRAM in the EBI mux */
+ hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
gpio_enable_ebi();
gpio_enable_usart1();
@@ -65,7 +92,22 @@ int board_early_init_f(void)
long int initdram(int board_type)
{
- return sdram_init(&sdram);
+ unsigned long expected_size;
+ unsigned long actual_size;
+ void *sdram_base;
+
+ sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+ expected_size = sdram_init(sdram_base, &sdram_config);
+ actual_size = get_ram_size(sdram_base, expected_size);
+
+ unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+ if (expected_size != actual_size)
+ printf("Warning: Only %u of %u MiB SDRAM is working\n",
+ actual_size >> 20, expected_size >> 20);
+
+ return actual_size;
}
void board_init_info(void)
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
index 4047825..12537f3 100644
--- a/board/atmel/atstk1000/flash.c
+++ b/board/atmel/atstk1000/flash.c
@@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR;
flash_info_t flash_info[1];
-static void __flashprog flash_identify(uint16_t *flash, flash_info_t *info)
+static void flash_identify(uint16_t *flash, flash_info_t *info)
{
unsigned long flags;
@@ -76,7 +76,7 @@ void flash_print_info(flash_info_t *info)
info->size >> 10, info->sector_count);
}
-int __flashprog flash_erase(flash_info_t *info, int s_first, int s_last)
+int flash_erase(flash_info_t *info, int s_first, int s_last)
{
unsigned long flags;
unsigned long start_time;
@@ -154,7 +154,7 @@ int __flashprog flash_erase(flash_info_t *info, int s_first, int s_last)
return ERR_OK;
}
-int __flashprog write_buff(flash_info_t *info, uchar *src,
+int write_buff(flash_info_t *info, uchar *src,
ulong addr, ulong count)
{
unsigned long flags;
diff --git a/board/atmel/atstk1000/u-boot.lds b/board/atmel/atstk1000/u-boot.lds
index 247812e..0d3b19c 100644
--- a/board/atmel/atstk1000/u-boot.lds
+++ b/board/atmel/atstk1000/u-boot.lds
@@ -29,17 +29,10 @@ SECTIONS
. = 0;
_text = .;
.text : {
+ *(.exception.text)
*(.text)
*(.text.*)
}
-
- . = ALIGN(32);
- __flashprog_start = .;
- .flashprog : {
- *(.flashprog)
- }
- . = ALIGN(32);
- __flashprog_end = .;
_etext = .;
.rodata : {
diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c
index a13eeeb..1be72a2 100644
--- a/board/dbau1x00/dbau1x00.c
+++ b/board/dbau1x00/dbau1x00.c
@@ -52,7 +52,7 @@ int checkboard (void)
*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
switch (proc_id >> 24) {
case 0:
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
index 6c82596..e18e68e 100644
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -257,25 +257,24 @@ void sdram_init(void)
#define SPI_CS_MASK 0x80000000
-void spi_eeprom_chipsel(int cs)
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
{
volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
- if (cs)
- iopd->dat &= ~SPI_CS_MASK;
- else
- iopd->dat |= SPI_CS_MASK;
+ iopd->dat &= ~SPI_CS_MASK;
}
-/*
- * The SPI command uses this table of functions for controlling the SPI
- * chip selects.
- */
-spi_chipsel_type spi_chipsel[] = {
- spi_eeprom_chipsel,
-};
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
+ iopd->dat |= SPI_CS_MASK;
+}
#endif /* CONFIG_HARD_SPI */
#if defined(CONFIG_OF_BOARD_SETUP)
diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c
index 6da80dc..9bc4d3f 100644
--- a/board/gth2/gth2.c
+++ b/board/gth2/gth2.c
@@ -135,7 +135,7 @@ int checkboard (void)
*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
switch (proc_id >> 24) {
case 0:
diff --git a/board/pb1x00/pb1x00.c b/board/pb1x00/pb1x00.c
index 536c954..82b7235 100644
--- a/board/pb1x00/pb1x00.c
+++ b/board/pb1x00/pb1x00.c
@@ -51,7 +51,7 @@ int checkboard (void)
*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
switch (proc_id >> 24) {
case 0:
diff --git a/board/qemu-mips/qemu-mips.c b/board/qemu-mips/qemu-mips.c
index 6869074..6e6eab2 100644
--- a/board/qemu-mips/qemu-mips.c
+++ b/board/qemu-mips/qemu-mips.c
@@ -38,7 +38,7 @@ int checkboard(void)
u32 proc_id;
u32 config1;
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
printf("Board: Qemu -M mips CPU: ");
switch (proc_id) {
case 0x00018000:
@@ -51,7 +51,7 @@ int checkboard(void)
printf("4KEc");
break;
case 0x00019300:
- config1 = read_mips32_cp0_config1();
+ config1 = read_c0_config1();
if (config1 & 1)
printf("24Kf");
else
@@ -64,7 +64,7 @@ int checkboard(void)
printf("R4000");
break;
case 0x00018100:
- config1 = read_mips32_cp0_config1();
+ config1 = read_c0_config1();
if (config1 & 1)
printf("5Kf");
else
diff --git a/board/quad100hd/Makefile b/board/quad100hd/Makefile
new file mode 100644
index 0000000..252ad5a
--- /dev/null
+++ b/board/quad100hd/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o nand.o
+SOBJS =
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/quad100hd/config.mk b/board/quad100hd/config.mk
new file mode 100644
index 0000000..1bdf5e4
--- /dev/null
+++ b/board/quad100hd/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFC0000
diff --git a/board/quad100hd/nand.c b/board/quad100hd/nand.c
new file mode 100644
index 0000000..a36b89d
--- /dev/null
+++ b/board/quad100hd/nand.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#if defined(CONFIG_CMD_NAND)
+#include <asm/gpio.h>
+#include <nand.h>
+
+/*
+ * hardware specific access to control-lines
+ */
+static void quad100hd_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ switch(cmd) {
+ case NAND_CTL_SETCLE:
+ gpio_write_bit(CFG_NAND_CLE, 1);
+ break;
+ case NAND_CTL_CLRCLE:
+ gpio_write_bit(CFG_NAND_CLE, 0);
+ break;
+
+ case NAND_CTL_SETALE:
+ gpio_write_bit(CFG_NAND_ALE, 1);
+ break;
+ case NAND_CTL_CLRALE:
+ gpio_write_bit(CFG_NAND_ALE, 0);
+ break;
+
+ case NAND_CTL_SETNCE:
+ gpio_write_bit(CFG_NAND_CE, 0);
+ break;
+ case NAND_CTL_CLRNCE:
+ gpio_write_bit(CFG_NAND_CE, 1);
+ break;
+ }
+}
+
+static int quad100hd_nand_ready(struct mtd_info *mtd)
+{
+ return gpio_read_in_bit(CFG_NAND_RDY);
+}
+
+/*
+ * Main initialization routine
+ */
+int board_nand_init(struct nand_chip *nand)
+{
+ /* Set address of hardware control function */
+ nand->hwcontrol = quad100hd_hwcontrol;
+ nand->dev_ready = quad100hd_nand_ready;
+ nand->eccmode = NAND_ECC_SOFT;
+ /* 15 us command delay time */
+ nand->chip_delay = 20;
+
+ /* Return happy */
+ return 0;
+}
+#endif /* CONFIG_CMD_NAND */
diff --git a/board/quad100hd/quad100hd.c b/board/quad100hd/quad100hd.c
new file mode 100644
index 0000000..638bd6c
--- /dev/null
+++ b/board/quad100hd/quad100hd.c
@@ -0,0 +1,93 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * Based in part on board/icecube/icecube.c from PPCBoot
+ * (C) Copyright 2003 Intrinsyc Software
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <environment.h>
+#include <logbuff.h>
+#include <post.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ /* taken from PPCBoot */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000);
+ mtdcr(uicpr, 0xFFFF7FFE); /* set int polarities */
+ mtdcr(uictr, 0x00000000); /* set int trigger levels */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+
+ mtdcr(CPC0_SRR, 0x00040000); /* Hold PCI bridge in reset */
+
+ return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+#ifdef DISPLAY_BOARD_INFO
+ sys_info_t sysinfo;
+#endif
+
+ puts("Board: Quad100hd");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+#ifdef DISPLAY_BOARD_INFO
+ /* taken from ppcboot */
+ get_sys_info(&sysinfo);
+
+ printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz);
+ printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf("\tEPB: %lu MHz\n", sysinfo.freqPLB / (sysinfo.pllExtBusDiv *
+ 1000000));
+ printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
+#endif
+
+ return 0;
+}
+
+long int initdram(int board_type)
+{
+ return CFG_SDRAM_SIZE;
+}
diff --git a/board/quad100hd/u-boot.lds b/board/quad100hd/u-boot.lds
new file mode 100644
index 0000000..195d91b
--- /dev/null
+++ b/board/quad100hd/u-boot.lds
@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c
index 25209e0..e85a0fc 100644
--- a/board/sacsng/sacsng.c
+++ b/board/sacsng/sacsng.c
@@ -842,37 +842,30 @@ void show_boot_progress (int status)
#define SPI_ADC_CS_MASK 0x00000800
#define SPI_DAC_CS_MASK 0x00001000
-void spi_adc_chipsel(int cs)
+static const u32 cs_mask[] = {
+ SPI_ADC_CS_MASK,
+ SPI_DAC_CS_MASK,
+};
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs < sizeof(cs_mask) / sizeof(cs_mask[0]);
+}
+
+void spi_cs_activate(struct spi_slave *slave)
{
volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */);
- if(cs)
- iopd->pdat &= ~SPI_ADC_CS_MASK; /* activate the chip select */
- else
- iopd->pdat |= SPI_ADC_CS_MASK; /* deactivate the chip select */
+ iopd->pdat &= ~cs_mask[slave->cs];
}
-void spi_dac_chipsel(int cs)
+void spi_cs_deactivate(struct spi_slave *slave)
{
volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */);
- if(cs)
- iopd->pdat &= ~SPI_DAC_CS_MASK; /* activate the chip select */
- else
- iopd->pdat |= SPI_DAC_CS_MASK; /* deactivate the chip select */
+ iopd->pdat |= cs_mask[slave->cs];
}
-/*
- * The SPI command uses this table of functions for controlling the SPI
- * chip selects: it calls the appropriate function to control the SPI
- * chip selects.
- */
-spi_chipsel_type spi_chipsel[] = {
- spi_adc_chipsel,
- spi_dac_chipsel
-};
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
-
#endif
#endif /* CONFIG_MISC_INIT_R */
diff --git a/board/ssv/adnpesc1/adnpesc1.c b/board/ssv/adnpesc1/adnpesc1.c
index 2ec3a72..3ee8ba5 100644
--- a/board/ssv/adnpesc1/adnpesc1.c
+++ b/board/ssv/adnpesc1/adnpesc1.c
@@ -69,25 +69,24 @@ long int initdram (int board_type)
#define SPI_RTC_CS_MASK 0x00000001
-void spi_rtc_chipsel(int cs)
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
{
nios_spi_t *spi = (nios_spi_t *)CFG_NIOS_SPIBASE;
- if (cs)
- spi->slaveselect = SPI_RTC_CS_MASK; /* activate (1) */
- else
- spi->slaveselect = 0; /* deactivate (0) */
+ spi->slaveselect = SPI_RTC_CS_MASK; /* activate (1) */
}
-/*
- * The SPI command uses this table of functions for controlling the SPI
- * chip selects: it calls the appropriate function to control the SPI
- * chip selects.
- */
-spi_chipsel_type spi_chipsel[] = {
- spi_rtc_chipsel
-};
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ nios_spi_t *spi = (nios_spi_t *)CFG_NIOS_SPIBASE;
+
+ spi->slaveselect = 0; /* deactivate (0) */
+}
#endif
diff --git a/common/Makefile b/common/Makefile
index 9678799..b425795 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -113,6 +113,7 @@ COBJS-y += env_dataflash.o
COBJS-y += env_flash.o
COBJS-y += env_eeprom.o
COBJS-y += env_onenand.o
+COBJS-y += env_sf.o
COBJS-y += env_nvram.o
COBJS-y += env_nowhere.o
COBJS-y += exports.o
@@ -143,6 +144,7 @@ COBJS-y += xyzModem.o
COBJS-y += cmd_mac.o
COBJS-$(CONFIG_CMD_MFSL) += cmd_mfsl.o
COBJS-$(CONFIG_MP) += cmd_mp.o
+COBJS-$(CONFIG_CMD_SF) += cmd_sf.o
COBJS := $(COBJS-y)
SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/common/cmd_df.c b/common/cmd_df.c
new file mode 100644
index 0000000..5f65044
--- /dev/null
+++ b/common/cmd_df.c
@@ -0,0 +1,37 @@
+/*
+ * Command for accessing DataFlash.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ */
+#include <common.h>
+#include <df.h>
+
+static int do_df(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ const char *cmd;
+
+ /* need at least two arguments */
+ if (argc < 2)
+ goto usage;
+
+ cmd = argv[1];
+
+ if (strcmp(cmd, "init") == 0) {
+ df_init(0, 0, 1000000);
+ return 0;
+ }
+
+ if (strcmp(cmd, "info") == 0) {
+ df_show_info();
+ return 0;
+ }
+
+usage:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+}
+
+U_BOOT_CMD(
+ sf, 2, 1, do_serial_flash,
+ "sf - Serial flash sub-system\n",
+ "probe [bus:]cs - init flash device on given SPI bus and CS\n")
diff --git a/common/cmd_log.c b/common/cmd_log.c
index c6e72ac..fdcc575 100644
--- a/common/cmd_log.c
+++ b/common/cmd_log.c
@@ -66,6 +66,12 @@ static logbuff_t *log;
#endif
static char *lbuf;
+unsigned long __logbuffer_base(void)
+{
+ return CFG_SDRAM_BASE + gd->bd->bi_memsize - LOGBUFF_LEN;
+}
+unsigned long logbuffer_base (void) __attribute__((weak, alias("__logbuffer_base")));
+
void logbuff_init_ptrs (void)
{
unsigned long tag, post_word;
@@ -75,7 +81,7 @@ void logbuff_init_ptrs (void)
log = (logbuff_t *)CONFIG_ALT_LH_ADDR;
lbuf = (char *)CONFIG_ALT_LB_ADDR;
#else
- log = (logbuff_t *)(gd->bd->bi_memsize-LOGBUFF_LEN) - 1;
+ log = (logbuff_t *)(logbuffer_base ()) - 1;
lbuf = (char *)log->buf;
#endif
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 37eb41b..37198d2 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -37,8 +37,6 @@ int find_dev_and_part(const char *id, struct mtd_device **dev,
u8 *part_num, struct part_info **part);
#endif
-extern nand_info_t nand_info[]; /* info for NAND chips */
-
static int nand_dump_oob(nand_info_t *nand, ulong off)
{
return 0;
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index 9c5d1fc..49f134a 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -58,8 +58,9 @@ DECLARE_GLOBAL_DATA_PTR;
!defined(CFG_ENV_IS_IN_DATAFLASH) && \
!defined(CFG_ENV_IS_IN_NAND) && \
!defined(CFG_ENV_IS_IN_ONENAND) && \
+ !defined(CFG_ENV_IS_IN_SPI_FLASH) && \
!defined(CFG_ENV_IS_NOWHERE)
-# error Define one of CFG_ENV_IS_IN_{NVRAM|EEPROM|FLASH|DATAFLASH|ONENAND|NOWHERE}
+# error Define one of CFG_ENV_IS_IN_{NVRAM|EEPROM|FLASH|DATAFLASH|ONENAND|SPI_FLASH|NOWHERE}
#endif
#define XMK_STR(x) #x
diff --git a/common/cmd_sf.c b/common/cmd_sf.c
new file mode 100644
index 0000000..8c0a751
--- /dev/null
+++ b/common/cmd_sf.c
@@ -0,0 +1,191 @@
+/*
+ * Command for accessing SPI flash.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ */
+#include <common.h>
+#include <spi_flash.h>
+
+#include <asm/io.h>
+
+#ifndef CONFIG_SF_DEFAULT_SPEED
+# define CONFIG_SF_DEFAULT_SPEED 1000000
+#endif
+#ifndef CONFIG_SF_DEFAULT_MODE
+# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
+#endif
+
+static struct spi_flash *flash;
+
+static int do_spi_flash_probe(int argc, char *argv[])
+{
+ unsigned int bus = 0;
+ unsigned int cs;
+ unsigned int speed = CONFIG_SF_DEFAULT_SPEED;
+ unsigned int mode = CONFIG_SF_DEFAULT_MODE;
+ char *endp;
+ struct spi_flash *new;
+
+ if (argc < 2)
+ goto usage;
+
+ cs = simple_strtoul(argv[1], &endp, 0);
+ if (*argv[1] == 0 || (*endp != 0 && *endp != ':'))
+ goto usage;
+ if (*endp == ':') {
+ if (endp[1] == 0)
+ goto usage;
+
+ bus = cs;
+ cs = simple_strtoul(endp + 1, &endp, 0);
+ if (*endp != 0)
+ goto usage;
+ }
+
+ if (argc >= 3) {
+ speed = simple_strtoul(argv[2], &endp, 0);
+ if (*argv[2] == 0 || *endp != 0)
+ goto usage;
+ }
+ if (argc >= 4) {
+ mode = simple_strtoul(argv[3], &endp, 0);
+ if (*argv[3] == 0 || *endp != 0)
+ goto usage;
+ }
+
+ new = spi_flash_probe(bus, cs, speed, mode);
+ if (!new) {
+ printf("Failed to initialize SPI flash at %u:%u\n", bus, cs);
+ return 1;
+ }
+
+ if (flash)
+ spi_flash_free(flash);
+ flash = new;
+
+ printf("%u KiB %s at %u:%u is now current device\n",
+ flash->size >> 10, flash->name, bus, cs);
+
+ return 0;
+
+usage:
+ puts("Usage: sf probe [bus:]cs [hz] [mode]\n");
+ return 1;
+}
+
+static int do_spi_flash_read_write(int argc, char *argv[])
+{
+ unsigned long addr;
+ unsigned long offset;
+ unsigned long len;
+ void *buf;
+ char *endp;
+ int ret;
+
+ if (argc < 4)
+ goto usage;
+
+ addr = simple_strtoul(argv[1], &endp, 16);
+ if (*argv[1] == 0 || *endp != 0)
+ goto usage;
+ offset = simple_strtoul(argv[2], &endp, 16);
+ if (*argv[2] == 0 || *endp != 0)
+ goto usage;
+ len = simple_strtoul(argv[3], &endp, 16);
+ if (*argv[3] == 0 || *endp != 0)
+ goto usage;
+
+ buf = map_physmem(addr, len, MAP_WRBACK);
+ if (!buf) {
+ puts("Failed to map physical memory\n");
+ return 1;
+ }
+
+ if (strcmp(argv[0], "read") == 0)
+ ret = spi_flash_read(flash, offset, len, buf);
+ else
+ ret = spi_flash_write(flash, offset, len, buf);
+
+ unmap_physmem(buf, len);
+
+ if (ret) {
+ printf("SPI flash %s failed\n", argv[0]);
+ return 1;
+ }
+
+ return 0;
+
+usage:
+ printf("Usage: sf %s addr offset len\n", argv[0]);
+ return 1;
+}
+
+static int do_spi_flash_erase(int argc, char *argv[])
+{
+ unsigned long offset;
+ unsigned long len;
+ char *endp;
+ int ret;
+
+ if (argc < 3)
+ goto usage;
+
+ offset = simple_strtoul(argv[1], &endp, 16);
+ if (*argv[1] == 0 || *endp != 0)
+ goto usage;
+ len = simple_strtoul(argv[2], &endp, 16);
+ if (*argv[2] == 0 || *endp != 0)
+ goto usage;
+
+ ret = spi_flash_erase(flash, offset, len);
+ if (ret) {
+ printf("SPI flash %s failed\n", argv[0]);
+ return 1;
+ }
+
+ return 0;
+
+usage:
+ puts("Usage: sf erase offset len\n");
+ return 1;
+}
+
+static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ const char *cmd;
+
+ /* need at least two arguments */
+ if (argc < 2)
+ goto usage;
+
+ cmd = argv[1];
+
+ if (strcmp(cmd, "probe") == 0)
+ return do_spi_flash_probe(argc - 1, argv + 1);
+
+ /* The remaining commands require a selected device */
+ if (!flash) {
+ puts("No SPI flash selected. Please run `sf probe'\n");
+ return 1;
+ }
+
+ if (strcmp(cmd, "read") == 0 || strcmp(cmd, "write") == 0)
+ return do_spi_flash_read_write(argc - 1, argv + 1);
+ if (strcmp(cmd, "erase") == 0)
+ return do_spi_flash_erase(argc - 1, argv + 1);
+
+usage:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+}
+
+U_BOOT_CMD(
+ sf, 5, 1, do_spi_flash,
+ "sf - SPI flash sub-system\n",
+ "probe [bus:]cs [hz] [mode] - init flash device on given SPI bus\n"
+ " and chip select\n"
+ "sf read addr offset len - read `len' bytes starting at\n"
+ " `offset' to memory at `addr'\n"
+ "sf write addr offset len - write `len' bytes from memory\n"
+ " at `addr' to flash at `offset'\n"
+ "sf erase offset len - erase `len' bytes from `offset'\n");
diff --git a/common/cmd_spi.c b/common/cmd_spi.c
index 7604422..40ee7e7 100644
--- a/common/cmd_spi.c
+++ b/common/cmd_spi.c
@@ -37,20 +37,20 @@
# define MAX_SPI_BYTES 32 /* Maximum number of bytes we can handle */
#endif
-/*
- * External table of chip select functions (see the appropriate board
- * support for the actual definition of the table).
- */
-extern spi_chipsel_type spi_chipsel[];
-extern int spi_chipsel_cnt;
+#ifndef CONFIG_DEFAULT_SPI_BUS
+# define CONFIG_DEFAULT_SPI_BUS 0
+#endif
+#ifndef CONFIG_DEFAULT_SPI_MODE
+# define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
+#endif
/*
* Values from last command.
*/
-static int device;
-static int bitlen;
-static uchar dout[MAX_SPI_BYTES];
-static uchar din[MAX_SPI_BYTES];
+static unsigned int device;
+static int bitlen;
+static uchar dout[MAX_SPI_BYTES];
+static uchar din[MAX_SPI_BYTES];
/*
* SPI read/write
@@ -65,6 +65,7 @@ static uchar din[MAX_SPI_BYTES];
int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
+ struct spi_slave *slave;
char *cp = 0;
uchar tmp;
int j;
@@ -101,19 +102,24 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
}
- if ((device < 0) || (device >= spi_chipsel_cnt)) {
- printf("Invalid device %d, giving up.\n", device);
- return 1;
- }
if ((bitlen < 0) || (bitlen > (MAX_SPI_BYTES * 8))) {
printf("Invalid bitlen %d, giving up.\n", bitlen);
return 1;
}
- debug ("spi_chipsel[%d] = %08X\n",
- device, (uint)spi_chipsel[device]);
+ /* FIXME: Make these parameters run-time configurable */
+ slave = spi_setup_slave(CONFIG_DEFAULT_SPI_BUS, device, 1000000,
+ CONFIG_DEFAULT_SPI_MODE);
+ if (!slave) {
+ printf("Invalid device %d, giving up.\n", device);
+ return 1;
+ }
+
+ debug ("spi chipsel = %08X\n", device);
- if(spi_xfer(spi_chipsel[device], bitlen, dout, din) != 0) {
+ spi_claim_bus(slave);
+ if(spi_xfer(slave, bitlen, dout, din,
+ SPI_XFER_BEGIN | SPI_XFER_END) != 0) {
printf("Error with the SPI transaction.\n");
rcode = 1;
} else {
@@ -123,6 +129,8 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
printf("\n");
}
+ spi_release_bus(slave);
+ spi_free_slave(slave);
return rcode;
}
diff --git a/common/dlmalloc.c b/common/dlmalloc.c
index 20c2069..c51351e 100644
--- a/common/dlmalloc.c
+++ b/common/dlmalloc.c
@@ -1,3 +1,5 @@
+#include <common.h>
+
#if 0 /* Moved to malloc.h */
/* ---------- To make a malloc.h, start cutting here ------------ */
@@ -947,7 +949,6 @@ void malloc_stats();
#endif /* 0 */
#endif /* 0 */ /* Moved to malloc.h */
-#include <common.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/common/env_common.c b/common/env_common.c
index a494812..e6df9a5 100644
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -134,7 +134,8 @@ uchar default_environment[] = {
"\0"
};
-#if defined(CFG_ENV_IS_IN_NAND) /* Environment is in Nand Flash */
+#if defined(CFG_ENV_IS_IN_NAND) /* Environment is in Nand Flash */ \
+ || defined(CFG_ENV_IS_IN_SPI_FLASH)
int default_environment_size = sizeof(default_environment);
#endif
diff --git a/common/env_nand.c b/common/env_nand.c
index 70d05ad..3a98d2b 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -57,9 +57,6 @@ int nand_legacy_rw (struct nand_chip* nand, int cmd,
size_t start, size_t len,
size_t * retlen, u_char * buf);
-/* info for NAND chips, defined in drivers/mtd/nand/nand.c */
-extern nand_info_t nand_info[];
-
/* references to names in env_common.c */
extern uchar default_environment[];
extern int default_environment_size;
diff --git a/common/env_sf.c b/common/env_sf.c
new file mode 100644
index 0000000..d641a9a
--- /dev/null
+++ b/common/env_sf.c
@@ -0,0 +1,131 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Andreas Heppel <aheppel@sysgo.de>
+ *
+ * (C) Copyright 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CFG_ENV_IS_IN_SPI_FLASH
+
+#include <environment.h>
+#include <spi_flash.h>
+
+#ifndef CFG_ENV_SPI_BUS
+# define CFG_ENV_SPI_BUS 0
+#endif
+#ifndef CFG_ENV_SPI_CS
+# define CFG_ENV_SPI_CS 0
+#endif
+#ifndef CFG_ENV_SPI_MAX_HZ
+# define CFG_ENV_SPI_MAX_HZ 1000000
+#endif
+#ifndef CFG_ENV_SPI_MODE
+# define CFG_ENV_SPI_MODE SPI_MODE_3
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* references to names in env_common.c */
+extern uchar default_environment[];
+extern int default_environment_size;
+
+char * env_name_spec = "SPI Flash";
+env_t *env_ptr;
+
+static struct spi_flash *env_flash;
+
+uchar env_get_char_spec(int index)
+{
+ return *((uchar *)(gd->env_addr + index));
+}
+
+int saveenv(void)
+{
+ if (!env_flash) {
+ puts("Environment SPI flash not initialized\n");
+ return 1;
+ }
+
+ puts("Erasing SPI flash...");
+ if (spi_flash_erase(env_flash, CFG_ENV_OFFSET, CFG_ENV_SIZE))
+ return 1;
+
+ puts("Writing to SPI flash...");
+ if (spi_flash_write(env_flash, CFG_ENV_OFFSET, CFG_ENV_SIZE, env_ptr))
+ return 1;
+
+ puts("done\n");
+ return 0;
+}
+
+void env_relocate_spec(void)
+{
+ int ret;
+
+ env_flash = spi_flash_probe(CFG_ENV_SPI_BUS, CFG_ENV_SPI_CS,
+ CFG_ENV_SPI_MAX_HZ, CFG_ENV_SPI_MODE);
+ if (!env_flash)
+ goto err_probe;
+
+ ret = spi_flash_read(env_flash, CFG_ENV_OFFSET, CFG_ENV_SIZE, env_ptr);
+ if (ret)
+ goto err_read;
+
+ if (crc32(0, env_ptr->data, ENV_SIZE) != env_ptr->crc)
+ goto err_crc;
+
+ gd->env_valid = 1;
+
+ return;
+
+err_read:
+ spi_flash_free(env_flash);
+ env_flash = NULL;
+err_probe:
+err_crc:
+ puts("*** Warning - bad CRC, using default environment\n\n");
+
+ if (default_environment_size > CFG_ENV_SIZE) {
+ gd->env_valid = 0;
+ puts("*** Error - default environment is too large\n\n");
+ return;
+ }
+
+ memset(env_ptr, 0, sizeof(env_t));
+ memcpy(env_ptr->data, default_environment, default_environment_size);
+ env_ptr->crc = crc32(0, env_ptr->data, ENV_SIZE);
+ gd->env_valid = 1;
+}
+
+int env_init(void)
+{
+ /* SPI flash isn't usable before relocation */
+ gd->env_addr = (ulong)&default_environment[0];
+ gd->env_valid = 1;
+
+ return 0;
+}
+
+#endif /* CFG_ENV_IS_IN_SPI_FLASH */
diff --git a/common/image.c b/common/image.c
index 67e594d..9188024 100644
--- a/common/image.c
+++ b/common/image.c
@@ -35,6 +35,10 @@
#include <dataflash.h>
#endif
+#ifdef CONFIG_LOGBUFFER
+#include <logbuff.h>
+#endif
+
#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE)
#include <rtc.h>
#endif
@@ -1013,6 +1017,12 @@ int boot_ramdisk_high (struct lmb *lmb, ulong rd_data, ulong rd_len,
initrd_high = ~0;
}
+
+#ifdef CONFIG_LOGBUFFER
+ /* Prevent initrd from overwriting logbuffer */
+ lmb_reserve(lmb, logbuffer_base() - LOGBUFF_OVERHEAD, LOGBUFF_RESERVE);
+#endif
+
debug ("## initrd_high = 0x%08lx, copy_to_ram = %d\n",
initrd_high, initrd_copy_to_ram);
diff --git a/common/lcd.c b/common/lcd.c
index 914dc2e..ebf377a 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -50,6 +50,11 @@
#include <lcdvideo.h>
#endif
+#if defined(CONFIG_ATMEL_LCD)
+#include <atmel_lcdc.h>
+#include <nand.h>
+#endif
+
#ifdef CONFIG_LCD
/************************************************************************/
@@ -474,14 +479,22 @@ ulong lcd_setmem (ulong addr)
static void lcd_setfgcolor (int color)
{
+#ifdef CONFIG_ATMEL_LCD
+ lcd_color_fg = color;
+#else
lcd_color_fg = color & 0x0F;
+#endif
}
/*----------------------------------------------------------------------*/
static void lcd_setbgcolor (int color)
{
+#ifdef CONFIG_ATMEL_LCD
+ lcd_color_bg = color;
+#else
lcd_color_bg = color & 0x0F;
+#endif
}
/*----------------------------------------------------------------------*/
@@ -508,7 +521,11 @@ static int lcd_getbgcolor (void)
#ifdef CONFIG_LCD_LOGO
void bitmap_plot (int x, int y)
{
+#ifdef CONFIG_ATMEL_LCD
+ uint *cmap;
+#else
ushort *cmap;
+#endif
ushort i, j;
uchar *bmap;
uchar *fb;
@@ -533,6 +550,8 @@ void bitmap_plot (int x, int y)
cmap = (ushort *)fbi->palette;
#elif defined(CONFIG_MPC823)
cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET*sizeof(ushort)]);
+#elif defined(CONFIG_ATMEL_LCD)
+ cmap = (uint *) (panel_info.mmio + ATMEL_LCDC_LUT(0));
#endif
WATCHDOG_RESET();
@@ -540,11 +559,26 @@ void bitmap_plot (int x, int y)
/* Set color map */
for (i=0; i<(sizeof(bmp_logo_palette)/(sizeof(ushort))); ++i) {
ushort colreg = bmp_logo_palette[i];
+#ifdef CONFIG_ATMEL_LCD
+ uint lut_entry;
+#ifdef CONFIG_ATMEL_LCD_BGR555
+ lut_entry = ((colreg & 0x000F) << 11) |
+ ((colreg & 0x00F0) << 2) |
+ ((colreg & 0x0F00) >> 7);
+#else /* CONFIG_ATMEL_LCD_RGB565 */
+ lut_entry = ((colreg & 0x000F) << 1) |
+ ((colreg & 0x00F0) << 3) |
+ ((colreg & 0x0F00) << 4);
+#endif
+ *(cmap + BMP_LOGO_OFFSET) = lut_entry;
+ cmap++;
+#else /* !CONFIG_ATMEL_LCD */
#ifdef CFG_INVERT_COLORS
*cmap++ = 0xffff - colreg;
#else
*cmap++ = colreg;
#endif
+#endif /* CONFIG_ATMEL_LCD */
}
WATCHDOG_RESET();
@@ -578,7 +612,9 @@ void bitmap_plot (int x, int y)
*/
int lcd_display_bitmap(ulong bmp_image, int x, int y)
{
-#if !defined(CONFIG_MCC200)
+#ifdef CONFIG_ATMEL_LCD
+ uint *cmap;
+#elif !defined(CONFIG_MCC200)
ushort *cmap;
#endif
ushort i, j;
@@ -633,6 +669,8 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
cmap = (ushort *)fbi->palette;
#elif defined(CONFIG_MPC823)
cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]);
+#elif defined(CONFIG_ATMEL_LCD)
+ cmap = (uint *) (panel_info.mmio + ATMEL_LCDC_LUT(0));
#else
# error "Don't know location of color map"
#endif
@@ -708,6 +746,10 @@ static void *lcd_logo (void)
#ifdef CONFIG_LCD_INFO
char info[80];
char temp[32];
+#ifdef CONFIG_ATMEL_LCD
+ int i;
+ ulong dram_size, nand_size;
+#endif
#endif /* CONFIG_LCD_INFO */
#ifdef CONFIG_SPLASH_SCREEN
@@ -765,6 +807,40 @@ static void *lcd_logo (void)
# endif /* CONFIG_LCD_INFO */
#endif /* CONFIG_MPC823 */
+#ifdef CONFIG_ATMEL_LCD
+# ifdef CONFIG_LCD_INFO
+ sprintf (info, "%s", U_BOOT_VERSION);
+ lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info));
+
+ sprintf (info, "(C) 2008 ATMEL Corp");
+ lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
+ (uchar *)info, strlen(info));
+
+ sprintf (info, "at91support@atmel.com");
+ lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2,
+ (uchar *)info, strlen(info));
+
+ sprintf (info, "%s CPU at %s MHz",
+ AT91_CPU_NAME,
+ strmhz(temp, AT91_MAIN_CLOCK));
+ lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
+ (uchar *)info, strlen(info));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CFG_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+ sprintf (info, " %ld MB SDRAM, %ld MB NAND",
+ dram_size >> 20,
+ nand_size >> 20 );
+ lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
+ (uchar *)info, strlen(info));
+# endif /* CONFIG_LCD_INFO */
+#endif /* CONFIG_ATMEL_LCD */
+
+
#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length));
#else
diff --git a/common/main.c b/common/main.c
index a17b60b..046da6f 100644
--- a/common/main.c
+++ b/common/main.c
@@ -940,12 +940,6 @@ int readline_into_buffer (const char *const prompt, char * buffer)
int rc;
static int initted = 0;
- if (!initted) {
- hist_init();
- initted = 1;
- }
-
-
/*
* History uses a global array which is not
* writable until after relocation to RAM.
diff --git a/common/soft_i2c.c b/common/soft_i2c.c
index c5d7e20..5ef7f30 100644
--- a/common/soft_i2c.c
+++ b/common/soft_i2c.c
@@ -252,6 +252,7 @@ static uchar read_byte(int ack)
* Read 8 bits, MSB first.
*/
I2C_TRISTATE;
+ I2C_SDA(1);
data = 0;
for(j = 0; j < 8; j++) {
I2C_SCL(0);
diff --git a/common/soft_spi.c b/common/soft_spi.c
index e425061..c131650 100644
--- a/common/soft_spi.c
+++ b/common/soft_spi.c
@@ -29,6 +29,8 @@
#if defined(CONFIG_SOFT_SPI)
+#include <malloc.h>
+
/*-----------------------------------------------------------------------
* Definitions
*/
@@ -39,6 +41,15 @@
#define PRINTD(fmt,args...)
#endif
+struct soft_spi_slave {
+ struct spi_slave slave;
+ unsigned int mode;
+};
+
+static inline struct soft_spi_slave *to_soft_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct soft_spi_slave, slave);
+}
/*=====================================================================*/
/* Public Functions */
@@ -56,6 +67,57 @@ void spi_init (void)
#endif
}
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct soft_spi_slave *ss;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ ss = malloc(sizeof(struct soft_spi_slave));
+ if (!ss)
+ return NULL;
+
+ ss->slave.bus = bus;
+ ss->slave.cs = cs;
+ ss->mode = mode;
+
+ /* TODO: Use max_hz to limit the SCK rate */
+
+ return &ss->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct soft_spi_slave *ss = to_soft_spi(slave);
+
+ free(ss);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+#ifdef CFG_IMMR
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+#endif
+ struct soft_spi_slave *ss = to_soft_spi(slave);
+
+ /*
+ * Make sure the SPI clock is in idle state as defined for
+ * this slave.
+ */
+ if (ss->mode & SPI_CPOL)
+ SPI_SCL(1);
+ else
+ SPI_SCL(0);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ /* Nothing to do */
+}
/*-----------------------------------------------------------------------
* SPI transfer
@@ -68,50 +130,54 @@ void spi_init (void)
* and "din" can point to the same memory location, in which case the
* input data overwrites the output data (since both are buffered by
* temporary variables, this is OK).
- *
- * If the chipsel() function is not NULL, it is called with a parameter
- * of '1' (chip select active) at the start of the transfer and again with
- * a parameter of '0' at the end of the transfer.
- *
- * If the chipsel() function _is_ NULL, it the responsibility of the
- * caller to make the appropriate chip select active before calling
- * spi_xfer() and making it inactive after spi_xfer() returns.
*/
-int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
{
#ifdef CFG_IMMR
volatile immap_t *immr = (immap_t *)CFG_IMMR;
#endif
- uchar tmpdin = 0;
- uchar tmpdout = 0;
- int j;
+ struct soft_spi_slave *ss = to_soft_spi(slave);
+ uchar tmpdin = 0;
+ uchar tmpdout = 0;
+ const u8 *txd = dout;
+ u8 *rxd = din;
+ int cpol = ss->mode & SPI_CPOL;
+ int cpha = ss->mode & SPI_CPHA;
+ unsigned int j;
- PRINTD("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
- (int)chipsel, *(uint *)dout, *(uint *)din, bitlen);
+ PRINTD("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n",
+ slave->bus, slave->cs, *(uint *)txd, *(uint *)rxd, bitlen);
- if(chipsel != NULL) {
- (*chipsel)(1); /* select the target chip */
- }
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
for(j = 0; j < bitlen; j++) {
/*
* Check if it is time to work on a new byte.
*/
if((j % 8) == 0) {
- tmpdout = *dout++;
+ tmpdout = *txd++;
if(j != 0) {
- *din++ = tmpdin;
+ *rxd++ = tmpdin;
}
tmpdin = 0;
}
- SPI_SCL(0);
+
+ if (!cpha)
+ SPI_SCL(!cpol);
SPI_SDA(tmpdout & 0x80);
SPI_DELAY;
- SPI_SCL(1);
+ if (cpha)
+ SPI_SCL(!cpol);
+ else
+ SPI_SCL(cpol);
+ tmpdin <<= 1;
+ tmpdin |= SPI_READ;
+ tmpdout <<= 1;
SPI_DELAY;
- tmpdin <<= 1;
- tmpdin |= SPI_READ;
- tmpdout <<= 1;
+ if (cpha)
+ SPI_SCL(cpol);
}
/*
* If the number of bits isn't a multiple of 8, shift the last
@@ -120,14 +186,10 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
*/
if((bitlen % 8) != 0)
tmpdin <<= 8 - (bitlen % 8);
- *din++ = tmpdin;
-
- SPI_SCL(0); /* SPI wants the clock left low for idle */
+ *rxd++ = tmpdin;
- if(chipsel != NULL) {
- (*chipsel)(0); /* deselect the target chip */
-
- }
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
return(0);
}
diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S
index b5834b9..42b0f72 100644
--- a/cpu/74xx_7xx/start.S
+++ b/cpu/74xx_7xx/start.S
@@ -316,7 +316,7 @@ invalidate_bats:
mtspr IBAT1U, r0
mtspr IBAT2U, r0
mtspr IBAT3U, r0
-#ifdef CONFIG_750FX
+#ifdef CONFIG_HIGH_BATS
mtspr IBAT4U, r0
mtspr IBAT5U, r0
mtspr IBAT6U, r0
@@ -327,7 +327,7 @@ invalidate_bats:
mtspr DBAT1U, r0
mtspr DBAT2U, r0
mtspr DBAT3U, r0
-#ifdef CONFIG_750FX
+#ifdef CONFIG_HIGH_BATS
mtspr DBAT4U, r0
mtspr DBAT5U, r0
mtspr DBAT6U, r0
@@ -414,7 +414,7 @@ setup_bats:
mtspr DBAT3U, r3
isync
-#ifdef CONFIG_750FX
+#ifdef CONFIG_HIGH_BATS
/* IBAT 4 */
addis r4, r0, CFG_IBAT4L@h
ori r4, r4, CFG_IBAT4L@l
diff --git a/cpu/arm926ejs/at91sam9/config.mk b/cpu/arm926ejs/at91sam9/config.mk
index ca2cae1..83040eb 100644
--- a/cpu/arm926ejs/at91sam9/config.mk
+++ b/cpu/arm926ejs/at91sam9/config.mk
@@ -1,2 +1,3 @@
PLATFORM_CPPFLAGS += -march=armv5te
PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,)
+LDSCRIPT := $(SRCTREE)/cpu/arm926ejs/at91sam9/u-boot.lds
diff --git a/board/atmel/at91cap9adk/u-boot.lds b/cpu/arm926ejs/at91sam9/u-boot.lds
index 996f401..996f401 100644
--- a/board/atmel/at91cap9adk/u-boot.lds
+++ b/cpu/arm926ejs/at91sam9/u-boot.lds
diff --git a/cpu/arm926ejs/at91sam9/usb.c b/cpu/arm926ejs/at91sam9/usb.c
index 441349d..2a92f73 100644
--- a/cpu/arm926ejs/at91sam9/usb.c
+++ b/cpu/arm926ejs/at91sam9/usb.c
@@ -33,7 +33,11 @@ int usb_cpu_init(void)
{
/* Enable USB host clock. */
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP);
+#ifdef CONFIG_AT91SAM9261
+ at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP | AT91_PMC_HCK0);
+#else
at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP);
+#endif
return 0;
}
@@ -42,7 +46,11 @@ int usb_cpu_stop(void)
{
/* Disable USB host clock. */
at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP);
+#ifdef CONFIG_AT91SAM9261
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_HCK0);
+#else
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP);
+#endif
return 0;
}
diff --git a/cpu/at32ap/Makefile b/cpu/at32ap/Makefile
index f69b1f3..d16c58b 100644
--- a/cpu/at32ap/Makefile
+++ b/cpu/at32ap/Makefile
@@ -27,13 +27,19 @@ include $(TOPDIR)/config.mk
LIB := $(obj)lib$(CPU).a
-START := start.o
-SOBJS := entry.o
-COBJS := cpu.o hsdramc.o exception.o cache.o
-COBJS += interrupts.o pio.o atmel_mci.o
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
+START-y += start.o
+
+COBJS-y += cpu.o
+COBJS-y += hsdramc.o
+COBJS-y += exception.o
+COBJS-y += cache.o
+COBJS-y += interrupts.o
+COBJS-y += pio.o
+COBJS-$(CONFIG_MMC) += atmel_mci.o
+
+SRCS := $(START-y:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+START := $(addprefix $(obj),$(START-y))
all: $(obj).depend $(START) $(LIB)
diff --git a/cpu/at32ap/at32ap700x/Makefile b/cpu/at32ap/at32ap700x/Makefile
index d276712..7404235 100644
--- a/cpu/at32ap/at32ap700x/Makefile
+++ b/cpu/at32ap/at32ap700x/Makefile
@@ -24,7 +24,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)lib$(SOC).a
-COBJS := gpio.o
+COBJS := gpio.o clk.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/at32ap/at32ap700x/clk.c b/cpu/at32ap/at32ap700x/clk.c
new file mode 100644
index 0000000..b3aa034
--- /dev/null
+++ b/cpu/at32ap/at32ap700x/clk.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2005-2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
+
+#include "sm.h"
+
+void clk_init(void)
+{
+ uint32_t cksel;
+
+ /* in case of soft resets, disable watchdog */
+ sm_writel(WDT_CTRL, SM_BF(KEY, 0x55));
+ sm_writel(WDT_CTRL, SM_BF(KEY, 0xaa));
+
+#ifdef CONFIG_PLL
+ /* Initialize the PLL */
+ sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
+ | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
+ | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
+ | SM_BF(PLLOPT, CFG_PLL0_OPT)
+ | SM_BF(PLLOSC, 0)
+ | SM_BIT(PLLEN)));
+
+ /* Wait for lock */
+ while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ;
+#endif
+
+ /* Set up clocks for the CPU and all peripheral buses */
+ cksel = 0;
+ if (CFG_CLKDIV_CPU)
+ cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
+ if (CFG_CLKDIV_HSB)
+ cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
+ if (CFG_CLKDIV_PBA)
+ cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
+ if (CFG_CLKDIV_PBB)
+ cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
+ sm_writel(PM_CKSEL, cksel);
+
+#ifdef CONFIG_PLL
+ /* Use PLL0 as main clock */
+ sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
+#endif
+}
diff --git a/cpu/at32ap/at32ap700x/gpio.c b/cpu/at32ap/at32ap700x/gpio.c
index 859124a..3da35d4 100644
--- a/cpu/at32ap/at32ap700x/gpio.c
+++ b/cpu/at32ap/at32ap700x/gpio.c
@@ -21,8 +21,11 @@
*/
#include <common.h>
+#include <asm/io.h>
+
#include <asm/arch/chip-features.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/memory-map.h>
/*
* Lots of small functions here. We depend on --gc-sections getting
@@ -142,3 +145,43 @@ void gpio_enable_mmci(void)
gpio_select_periph_A(GPIO_PIN_PA15, 0); /* DATA3 */
}
#endif
+
+#ifdef AT32AP700x_CHIP_HAS_SPI
+void gpio_enable_spi0(unsigned long cs_mask)
+{
+ u32 pa_mask = 0;
+
+ gpio_select_periph_A(GPIO_PIN_PA0, 0); /* MISO */
+ gpio_select_periph_A(GPIO_PIN_PA1, 0); /* MOSI */
+ gpio_select_periph_A(GPIO_PIN_PA2, 0); /* SCK */
+
+ if (cs_mask & (1 << 0))
+ pa_mask |= 1 << 3; /* NPCS0 */
+ if (cs_mask & (1 << 1))
+ pa_mask |= 1 << 4; /* NPCS1 */
+ if (cs_mask & (1 << 2))
+ pa_mask |= 1 << 5; /* NPCS2 */
+ if (cs_mask & (1 << 3))
+ pa_mask |= 1 << 20; /* NPCS3 */
+
+ __raw_writel(pa_mask, PIOA_BASE + 0x00);
+ __raw_writel(pa_mask, PIOA_BASE + 0x30);
+ __raw_writel(pa_mask, PIOA_BASE + 0x10);
+}
+
+void gpio_enable_spi1(unsigned long cs_mask)
+{
+ gpio_select_periph_B(GPIO_PIN_PA0, 0); /* MISO */
+ gpio_select_periph_B(GPIO_PIN_PB1, 0); /* MOSI */
+ gpio_select_periph_B(GPIO_PIN_PB5, 0); /* SCK */
+
+ if (cs_mask & (1 << 0))
+ gpio_select_periph_B(GPIO_PIN_PB2, 0); /* NPCS0 */
+ if (cs_mask & (1 << 1))
+ gpio_select_periph_B(GPIO_PIN_PB3, 0); /* NPCS1 */
+ if (cs_mask & (1 << 2))
+ gpio_select_periph_B(GPIO_PIN_PB4, 0); /* NPCS2 */
+ if (cs_mask & (1 << 3))
+ gpio_select_periph_A(GPIO_PIN_PA27, 0); /* NPCS3 */
+}
+#endif
diff --git a/cpu/at32ap/sm.h b/cpu/at32ap/at32ap700x/sm.h
index 6492c8e..6492c8e 100644
--- a/cpu/at32ap/sm.h
+++ b/cpu/at32ap/at32ap700x/sm.h
diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c
index f59dfb5..3795add 100644
--- a/cpu/at32ap/atmel_mci.c
+++ b/cpu/at32ap/atmel_mci.c
@@ -21,8 +21,6 @@
*/
#include <common.h>
-#ifdef CONFIG_MMC
-
#include <part.h>
#include <mmc.h>
@@ -139,7 +137,7 @@ mmc_cmd(unsigned long cmd, unsigned long arg,
pr_debug("mmc: status 0x%08lx\n", status);
- if (status & ERROR_FLAGS) {
+ if (status & error_flags) {
printf("mmc: command %lu failed (status: 0x%08lx)\n",
cmd, status);
return -EIO;
@@ -182,12 +180,13 @@ static int mmc_acmd(unsigned long cmd, unsigned long arg,
static unsigned long
mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
- unsigned long *buffer)
+ void *buffer)
{
int ret, i = 0;
unsigned long resp[4];
unsigned long card_status, data;
unsigned long wordcount;
+ u32 *p = buffer;
u32 status;
if (blkcnt == 0)
@@ -225,7 +224,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
if (status & MMCI_BIT(RXRDY)) {
data = mmci_readl(RDR);
/* pr_debug("%x\n", data); */
- *buffer++ = data;
+ *p++ = data;
wordcount++;
}
} while(wordcount < (mmc_blkdev.blksz / 4));
@@ -443,6 +442,7 @@ static void mci_set_data_timeout(struct mmc_csd *csd)
dtocyc = timeout_clks;
dtomul = 0;
+ shift = 0;
while (dtocyc > 15 && dtomul < 8) {
dtomul++;
shift = dtomul_to_shift[dtomul];
@@ -546,5 +546,3 @@ int mmc2info(ulong addr)
{
return 0;
}
-
-#endif /* CONFIG_MMC */
diff --git a/cpu/at32ap/cpu.c b/cpu/at32ap/cpu.c
index 311466b..0ba8361 100644
--- a/cpu/at32ap/cpu.c
+++ b/cpu/at32ap/cpu.c
@@ -30,7 +30,6 @@
#include <asm/arch/memory-map.h>
#include "hsmc3.h"
-#include "sm.h"
/* Sanity checks */
#if (CFG_CLKDIV_CPU > CFG_CLKDIV_HSB) \
@@ -44,47 +43,9 @@
DECLARE_GLOBAL_DATA_PTR;
-static void pm_init(void)
-{
- uint32_t cksel;
-
-#ifdef CONFIG_PLL
- /* Initialize the PLL */
- sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
- | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
- | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
- | SM_BF(PLLOPT, CFG_PLL0_OPT)
- | SM_BF(PLLOSC, 0)
- | SM_BIT(PLLEN)));
-
- /* Wait for lock */
- while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ;
-#endif
-
- /* Set up clocks for the CPU and all peripheral buses */
- cksel = 0;
- if (CFG_CLKDIV_CPU)
- cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
- if (CFG_CLKDIV_HSB)
- cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
- if (CFG_CLKDIV_PBA)
- cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
- if (CFG_CLKDIV_PBB)
- cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
- sm_writel(PM_CKSEL, cksel);
-
- gd->cpu_hz = get_cpu_clk_rate();
-
-#ifdef CONFIG_PLL
- /* Use PLL0 as main clock */
- sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
-#endif
-}
-
int cpu_init(void)
{
extern void _evba(void);
- char *p;
gd->cpu_hz = CFG_OSC0_HZ;
@@ -95,16 +56,15 @@ int cpu_init(void)
hsmc3_writel(PULSE0, 0x0b0a0906);
hsmc3_writel(SETUP0, 0x00010002);
- pm_init();
+ clk_init();
+ /* Update the CPU speed according to the PLL configuration */
+ gd->cpu_hz = get_cpu_clk_rate();
+
+ /* Set up the exception handler table and enable exceptions */
sysreg_write(EVBA, (unsigned long)&_evba);
asm volatile("csrf %0" : : "i"(SYSREG_EM_OFFSET));
- /* Lock everything that mess with the flash in the icache */
- for (p = __flashprog_start; p <= (__flashprog_end + CFG_ICACHE_LINESZ);
- p += CFG_ICACHE_LINESZ)
- asm volatile("cache %0, 0x02" : "=m"(*p) :: "memory");
-
return 0;
}
diff --git a/cpu/at32ap/entry.S b/cpu/at32ap/entry.S
deleted file mode 100644
index a6fc688..0000000
--- a/cpu/at32ap/entry.S
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <asm/sysreg.h>
-#include <asm/ptrace.h>
-
- .section .text.exception,"ax"
- .global _evba
- .type _evba,@function
- .align 10
-_evba:
- .irp x,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
- .align 2
- rjmp unknown_exception
- .endr
-
- .global timer_interrupt_handler
- .type timer_interrupt_handler,@function
- .align 2
-timer_interrupt_handler:
- /*
- * Increment timer_overflow and re-write COMPARE with 0xffffffff.
- *
- * We're running at interrupt level 3, so we don't need to save
- * r8-r12 or lr to the stack.
- */
- lda.w r8, timer_overflow
- ld.w r9, r8[0]
- mov r10, -1
- mtsr SYSREG_COMPARE, r10
- sub r9, -1
- st.w r8[0], r9
- rete
-
- .type unknown_exception, @function
-unknown_exception:
- pushm r0-r12
- sub r8, sp, REG_R12 - REG_R0 - 4
- mov r9, lr
- mfsr r10, SYSREG_RAR_EX
- mfsr r11, SYSREG_RSR_EX
- pushm r8-r11
- mfsr r12, SYSREG_ECR
- mov r11, sp
- rcall do_unknown_exception
-1: rjmp 1b
diff --git a/cpu/at32ap/exception.c b/cpu/at32ap/exception.c
index 0672685..dc9c300 100644
--- a/cpu/at32ap/exception.c
+++ b/cpu/at32ap/exception.c
@@ -111,7 +111,8 @@ void do_unknown_exception(unsigned int ecr, struct pt_regs *regs)
printf("CPU Mode: %s\n", cpu_modes[mode]);
/* Avoid exception loops */
- if (regs->sp < CFG_SDRAM_BASE || regs->sp >= gd->stack_end)
+ if (regs->sp < (gd->stack_end - CONFIG_STACKSIZE)
+ || regs->sp >= gd->stack_end)
printf("\nStack pointer seems bogus, won't do stack dump\n");
else
dump_mem("\nStack: ", regs->sp, gd->stack_end);
diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c
index 1fcfe75..992612b 100644
--- a/cpu/at32ap/hsdramc.c
+++ b/cpu/at32ap/hsdramc.c
@@ -30,39 +30,32 @@
#include "hsdramc1.h"
-unsigned long sdram_init(const struct sdram_info *info)
+unsigned long sdram_init(void *sdram_base, const struct sdram_config *config)
{
- unsigned long *sdram = (unsigned long *)uncached(info->phys_addr);
unsigned long sdram_size;
- unsigned long tmp;
- unsigned long bus_hz;
+ uint32_t cfgreg;
unsigned int i;
- if (!info->refresh_period)
- panic("ERROR: SDRAM refresh period == 0. "
- "Please update the board code\n");
-
- tmp = (HSDRAMC1_BF(NC, info->col_bits - 8)
- | HSDRAMC1_BF(NR, info->row_bits - 11)
- | HSDRAMC1_BF(NB, info->bank_bits - 1)
- | HSDRAMC1_BF(CAS, info->cas)
- | HSDRAMC1_BF(TWR, info->twr)
- | HSDRAMC1_BF(TRC, info->trc)
- | HSDRAMC1_BF(TRP, info->trp)
- | HSDRAMC1_BF(TRCD, info->trcd)
- | HSDRAMC1_BF(TRAS, info->tras)
- | HSDRAMC1_BF(TXSR, info->txsr));
-
-#ifdef CFG_SDRAM_16BIT
- tmp |= HSDRAMC1_BIT(DBW);
- sdram_size = 1 << (info->row_bits + info->col_bits
- + info->bank_bits + 1);
-#else
- sdram_size = 1 << (info->row_bits + info->col_bits
- + info->bank_bits + 2);
-#endif
-
- hsdramc1_writel(CR, tmp);
+ cfgreg = (HSDRAMC1_BF(NC, config->col_bits - 8)
+ | HSDRAMC1_BF(NR, config->row_bits - 11)
+ | HSDRAMC1_BF(NB, config->bank_bits - 1)
+ | HSDRAMC1_BF(CAS, config->cas)
+ | HSDRAMC1_BF(TWR, config->twr)
+ | HSDRAMC1_BF(TRC, config->trc)
+ | HSDRAMC1_BF(TRP, config->trp)
+ | HSDRAMC1_BF(TRCD, config->trcd)
+ | HSDRAMC1_BF(TRAS, config->tras)
+ | HSDRAMC1_BF(TXSR, config->txsr));
+
+ if (config->data_bits == SDRAM_DATA_16BIT)
+ cfgreg |= HSDRAMC1_BIT(DBW);
+
+ hsdramc1_writel(CR, cfgreg);
+
+ /* Send a NOP to turn on the clock (necessary on some chips) */
+ hsdramc1_writel(MR, HSDRAMC1_MODE_NOP);
+ hsdramc1_readl(MR);
+ writel(0, sdram_base);
/*
* Initialization sequence for SDRAM, from the data sheet:
@@ -77,7 +70,7 @@ unsigned long sdram_init(const struct sdram_info *info)
*/
hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE);
hsdramc1_readl(MR);
- writel(0, sdram);
+ writel(0, sdram_base);
/*
* 3. Eight auto-refresh (CBR) cycles are provided
@@ -85,58 +78,41 @@ unsigned long sdram_init(const struct sdram_info *info)
hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH);
hsdramc1_readl(MR);
for (i = 0; i < 8; i++)
- writel(0, sdram);
+ writel(0, sdram_base);
/*
* 4. A mode register set (MRS) cycle is issued to program
* SDRAM parameters, in particular CAS latency and burst
* length.
*
- * CAS from info struct, burst length 1, serial burst type
+ * The address will be chosen by the SDRAMC automatically; we
+ * just have to make sure BA[1:0] are set to 0.
*/
hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE);
hsdramc1_readl(MR);
- writel(0, sdram + (info->cas << 4));
+ writel(0, sdram_base);
/*
- * 5. A Normal Mode command is provided, 3 clocks after tMRD
- * is met.
- *
- * From the timing diagram, it looks like tMRD is 3
- * cycles...try a dummy read from the peripheral bus.
+ * 5. The application must go into Normal Mode, setting Mode
+ * to 0 in the Mode Register and performing a write access
+ * at any location in the SDRAM.
*/
- hsdramc1_readl(MR);
hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL);
hsdramc1_readl(MR);
- writel(0, sdram);
+ writel(0, sdram_base);
/*
* 6. Write refresh rate into SDRAMC refresh timer count
* register (refresh rate = timing between refresh cycles).
- *
- * 15.6 us is a typical value for a burst of length one
*/
- bus_hz = get_sdram_clk_rate();
- hsdramc1_writel(TR, info->refresh_period);
-
- printf("SDRAM: %u MB at address 0x%08lx\n",
- sdram_size >> 20, info->phys_addr);
-
- printf("Testing SDRAM...");
- for (i = 0; i < sdram_size / 4; i++)
- sdram[i] = i;
-
- for (i = 0; i < sdram_size / 4; i++) {
- tmp = sdram[i];
- if (tmp != i) {
- printf("FAILED at address 0x%08lx\n",
- info->phys_addr + i * 4);
- printf("SDRAM: read 0x%lx, expected 0x%lx\n", tmp, i);
- return 0;
- }
- }
-
- puts("OK\n");
+ hsdramc1_writel(TR, config->refresh_period);
+
+ if (config->data_bits == SDRAM_DATA_16BIT)
+ sdram_size = 1 << (config->row_bits + config->col_bits
+ + config->bank_bits + 1);
+ else
+ sdram_size = 1 << (config->row_bits + config->col_bits
+ + config->bank_bits + 2);
return sdram_size;
}
diff --git a/cpu/at32ap/interrupts.c b/cpu/at32ap/interrupts.c
index bef1f30..160838e 100644
--- a/cpu/at32ap/interrupts.c
+++ b/cpu/at32ap/interrupts.c
@@ -98,18 +98,16 @@ void set_timer(unsigned long t)
*/
void udelay(unsigned long usec)
{
- unsigned long now, end;
+ unsigned long cycles;
+ unsigned long base;
+ unsigned long now;
- now = sysreg_read(COUNT);
+ base = sysreg_read(COUNT);
+ cycles = ((usec * (get_tbclk() / 10000)) + 50) / 100;
- end = ((usec * (get_tbclk() / 10000)) + 50) / 100;
- end += now;
-
- while (now > end)
- now = sysreg_read(COUNT);
-
- while (now < end)
+ do {
now = sysreg_read(COUNT);
+ } while ((now - base) < cycles);
}
static int set_interrupt_handler(unsigned int nr, void (*handler)(void),
diff --git a/cpu/at32ap/start.S b/cpu/at32ap/start.S
index ab8c2b7..907e9b1 100644
--- a/cpu/at32ap/start.S
+++ b/cpu/at32ap/start.S
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) 2005-2008 Atmel Corporation
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -20,12 +20,9 @@
* MA 02111-1307 USA
*/
#include <config.h>
+#include <asm/ptrace.h>
#include <asm/sysreg.h>
-#ifndef PART_SPECIFIC_BOOTSTRAP
-# define PART_SPECIFIC_BOOTSTRAP
-#endif
-
#define SYSREG_MMUCR_I_OFFSET 2
#define SYSREG_MMUCR_S_OFFSET 4
@@ -34,11 +31,115 @@
| SYSREG_BIT(FE) | SYSREG_BIT(RE) \
| SYSREG_BIT(IBE) | SYSREG_BIT(IEE))
- .text
+ /*
+ * To save some space, we use the same entry point for
+ * exceptions and reset. This avoids lots of alignment padding
+ * since the reset vector is always suitably aligned.
+ */
+ .section .exception.text, "ax", @progbits
.global _start
+ .global _evba
+ .type _start, @function
+ .type _evba, @function
_start:
- PART_SPECIFIC_BOOTSTRAP
+ .size _start, 0
+_evba:
+ .org 0x00
+ rjmp unknown_exception /* Unrecoverable exception */
+ .org 0x04
+ rjmp unknown_exception /* TLB multiple hit */
+ .org 0x08
+ rjmp unknown_exception /* Bus error data fetch */
+ .org 0x0c
+ rjmp unknown_exception /* Bus error instruction fetch */
+ .org 0x10
+ rjmp unknown_exception /* NMI */
+ .org 0x14
+ rjmp unknown_exception /* Instruction address */
+ .org 0x18
+ rjmp unknown_exception /* ITLB protection */
+ .org 0x1c
+ rjmp unknown_exception /* Breakpoint */
+ .org 0x20
+ rjmp unknown_exception /* Illegal opcode */
+ .org 0x24
+ rjmp unknown_exception /* Unimplemented instruction */
+ .org 0x28
+ rjmp unknown_exception /* Privilege violation */
+ .org 0x2c
+ rjmp unknown_exception /* Floating-point */
+ .org 0x30
+ rjmp unknown_exception /* Coprocessor absent */
+ .org 0x34
+ rjmp unknown_exception /* Data Address (read) */
+ .org 0x38
+ rjmp unknown_exception /* Data Address (write) */
+ .org 0x3c
+ rjmp unknown_exception /* DTLB Protection (read) */
+ .org 0x40
+ rjmp unknown_exception /* DTLB Protection (write) */
+ .org 0x44
+ rjmp unknown_exception /* DTLB Modified */
+
+ .org 0x50
+ rjmp unknown_exception /* ITLB Miss */
+ .org 0x60
+ rjmp unknown_exception /* DTLB Miss (read) */
+ .org 0x70
+ rjmp unknown_exception /* DTLB Miss (write) */
+
+ .size _evba, . - _evba
+
+ .align 2
+ .type unknown_exception, @function
+unknown_exception:
+ /* Figure out whether we're handling an exception (Exception
+ * mode) or just booting (Supervisor mode). */
+ csrfcz SYSREG_M1_OFFSET
+ brcc at32ap_cpu_bootstrap
+
+ /* This is an exception. Complain. */
+ pushm r0-r12
+ sub r8, sp, REG_R12 - REG_R0 - 4
+ mov r9, lr
+ mfsr r10, SYSREG_RAR_EX
+ mfsr r11, SYSREG_RSR_EX
+ pushm r8-r11
+ mfsr r12, SYSREG_ECR
+ mov r11, sp
+ rcall do_unknown_exception
+1: rjmp 1b
+
+ /* The COUNT/COMPARE timer interrupt handler */
+ .global timer_interrupt_handler
+ .type timer_interrupt_handler,@function
+ .align 2
+timer_interrupt_handler:
+ /*
+ * Increment timer_overflow and re-write COMPARE with 0xffffffff.
+ *
+ * We're running at interrupt level 3, so we don't need to save
+ * r8-r12 or lr to the stack.
+ */
+ lda.w r8, timer_overflow
+ ld.w r9, r8[0]
+ mov r10, -1
+ mtsr SYSREG_COMPARE, r10
+ sub r9, -1
+ st.w r8[0], r9
+ rete
+ /*
+ * CPU bootstrap after reset is handled here. SoC code may
+ * override this in case they need to initialize oscillators,
+ * etc.
+ */
+ .section .text.at32ap_cpu_bootstrap, "ax", @progbits
+ .global at32ap_cpu_bootstrap
+ .weak at32ap_cpu_bootstrap
+ .type at32ap_cpu_bootstrap, @function
+ .align 2
+at32ap_cpu_bootstrap:
/* Reset the Status Register */
mov r0, lo(SR_INIT)
orh r0, hi(SR_INIT)
@@ -66,9 +167,16 @@ _start:
lddpc pc, 1f
.align 2
-1: .long 2f
+1: .long at32ap_low_level_init
+ .size _start, . - _start
-2: lddpc sp, sp_init
+ /* Common CPU bootstrap code after oscillator/cache/etc. init */
+ .section .text.avr32ap_low_level_init, "ax", @progbits
+ .global at32ap_low_level_init
+ .type at32ap_low_level_init, @function
+ .align 2
+at32ap_low_level_init:
+ lddpc sp, sp_init
/* Initialize the GOT pointer */
lddpc r6, got_init
@@ -90,6 +198,7 @@ got_init:
* Relocate the u-boot image into RAM and continue from there.
* Does not return.
*/
+ .section .text.relocate_code,"ax",@progbits
.global relocate_code
.type relocate_code,@function
relocate_code:
@@ -162,3 +271,5 @@ in_ram:
.align 2
got_init_reloc:
.long 3b - _GLOBAL_OFFSET_TABLE_
+
+ .size relocate_code, . - relocate_code
diff --git a/cpu/mips/cpu.c b/cpu/mips/cpu.c
index e267bba..0f58d25 100644
--- a/cpu/mips/cpu.c
+++ b/cpu/mips/cpu.c
@@ -66,10 +66,10 @@ void flush_cache(ulong start_addr, ulong size)
void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
{
- write_32bit_cp0_register(CP0_ENTRYLO0, low0);
- write_32bit_cp0_register(CP0_PAGEMASK, pagemask);
- write_32bit_cp0_register(CP0_ENTRYLO1, low1);
- write_32bit_cp0_register(CP0_ENTRYHI, hi);
- write_32bit_cp0_register(CP0_INDEX, index);
+ write_c0_entrylo0(low0);
+ write_c0_pagemask(pagemask);
+ write_c0_entrylo1(low1);
+ write_c0_entryhi(hi);
+ write_c0_index(index);
tlb_write_indexed();
}
diff --git a/cpu/mpc512x/traps.c b/cpu/mpc512x/traps.c
index 8455c92..8000fab 100644
--- a/cpu/mpc512x/traps.c
+++ b/cpu/mpc512x/traps.c
@@ -34,7 +34,13 @@ DECLARE_GLOBAL_DATA_PTR;
extern unsigned long search_exception_table(unsigned long);
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
+/*
+ * End of addressable memory. This may be less than the actual
+ * amount of memory on the system if we're unable to keep all
+ * the memory mapped in.
+ */
+extern ulong get_effective_memsize(void);
+#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
/*
* Trap & Exception support
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index 309eb30..c182174 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -557,7 +557,7 @@ invalidate_bats:
mtspr IBAT1U, r0
mtspr IBAT2U, r0
mtspr IBAT3U, r0
-#if (CFG_HID2 & HID2_HBE)
+#ifdef CONFIG_HIGH_BATS
mtspr IBAT4U, r0
mtspr IBAT5U, r0
mtspr IBAT6U, r0
@@ -568,7 +568,7 @@ invalidate_bats:
mtspr DBAT1U, r0
mtspr DBAT2U, r0
mtspr DBAT3U, r0
-#if (CFG_HID2 & HID2_HBE)
+#ifdef CONFIG_HIGH_BATS
mtspr DBAT4U, r0
mtspr DBAT5U, r0
mtspr DBAT6U, r0
@@ -655,7 +655,7 @@ setup_bats:
mtspr DBAT3U, r3
isync
-#if (CFG_HID2 & HID2_HBE)
+#ifdef CONFIG_HIGH_BATS
/* IBAT 4 */
addis r4, r0, CFG_IBAT4L@h
ori r4, r4, CFG_IBAT4L@l
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
index 3c74764..e26bf36 100644
--- a/cpu/mpc86xx/cpu.c
+++ b/cpu/mpc86xx/cpu.c
@@ -26,6 +26,7 @@
#include <watchdog.h>
#include <command.h>
#include <asm/cache.h>
+#include <asm/mmu.h>
#include <mpc86xx.h>
#include <asm/fsl_law.h>
@@ -268,13 +269,14 @@ dma_xfer(void *dest, uint count, void *src)
/*
* Print out the state of various machine registers.
- * Currently prints out LAWs and BR0/OR0
+ * Currently prints out LAWs, BR0/OR0, and BATs
*/
void mpc86xx_reginfo(void)
{
immap_t *immap = (immap_t *)CFG_IMMR;
ccsr_lbc_t *lbc = &immap->im_lbc;
+ print_bats();
print_laws();
printf ("Local Bus Controller Registers\n"
diff --git a/cpu/nios/spi.c b/cpu/nios/spi.c
index f37146b..6408180 100644
--- a/cpu/nios/spi.c
+++ b/cpu/nios/spi.c
@@ -63,10 +63,10 @@ static char quickhex (int i)
return hex_digit[i];
}
-static void memdump (void *pv, int num)
+static void memdump (const void *pv, int num)
{
int i;
- unsigned char *pc = (unsigned char *) pv;
+ const unsigned char *pc = (const unsigned char *) pv;
for (i = 0; i < num; i++)
printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
@@ -83,26 +83,64 @@ static void memdump (void *pv, int num)
#endif /* DEBUG */
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct spi_slave *slave;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ slave = malloc(sizeof(struct spi_slave));
+ if (!slave)
+ return NULL;
+
+ slave->bus = bus;
+ slave->cs = cs;
+
+ /* TODO: Add support for different modes and speeds */
+
+ return slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ free(slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+
+}
+
/*
* SPI transfer:
*
* See include/spi.h and http://www.altera.com/literature/ds/ds_nios_spi.pdf
* for more informations.
*/
-int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
+int spi_xfer(struct spi_slave *slave, int bitlen, const void *dout,
+ void *din, unsigned long flags)
{
+ const u8 *txd = dout;
+ u8 *rxd = din;
int j;
- DPRINT(("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
- (int)chipsel, *(uint *)dout, *(uint *)din, bitlen));
+ DPRINT(("spi_xfer: slave %u:%u dout %08X din %08X bitlen %d\n",
+ slave->bus, slave->cs, *(uint *)dout, *(uint *)din, bitlen));
- memdump((void*)dout, (bitlen + 7) / 8);
+ memdump(dout, (bitlen + 7) / 8);
- if(chipsel != NULL) {
- chipsel(1); /* select the target chip */
- }
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
- if (bitlen > CFG_NIOS_SPIBITS) { /* leave chip select active */
+ if (!(flags & SPI_XFER_END) || bitlen > CFG_NIOS_SPIBITS) {
+ /* leave chip select active */
spi->control |= NIOS_SPI_SSO;
}
@@ -114,11 +152,11 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
while ((spi->status & NIOS_SPI_TRDY) == 0)
;
- spi->txdata = (unsigned)(dout[j]);
+ spi->txdata = (unsigned)(txd[j]);
while ((spi->status & NIOS_SPI_RRDY) == 0)
;
- din[j] = (unsigned char)(spi->rxdata & 0xff);
+ rxd[j] = (unsigned char)(spi->rxdata & 0xff);
#elif (CFG_NIOS_SPIBITS == 16)
j++, j++) {
@@ -126,15 +164,15 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
while ((spi->status & NIOS_SPI_TRDY) == 0)
;
if ((j+1) < ((bitlen + 7) / 8))
- spi->txdata = (unsigned)((dout[j] << 8) | dout[j+1]);
+ spi->txdata = (unsigned)((txd[j] << 8) | txd[j+1]);
else
- spi->txdata = (unsigned)(dout[j] << 8);
+ spi->txdata = (unsigned)(txd[j] << 8);
while ((spi->status & NIOS_SPI_RRDY) == 0)
;
- din[j] = (unsigned char)((spi->rxdata >> 8) & 0xff);
+ rxd[j] = (unsigned char)((spi->rxdata >> 8) & 0xff);
if ((j+1) < ((bitlen + 7) / 8))
- din[j+1] = (unsigned char)(spi->rxdata & 0xff);
+ rxd[j+1] = (unsigned char)(spi->rxdata & 0xff);
#else
#error "*** unsupported value of CFG_NIOS_SPIBITS ***"
@@ -142,15 +180,14 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
}
- if (bitlen > CFG_NIOS_SPIBITS) {
+ if (bitlen > CFG_NIOS_SPIBITS && (flags & SPI_XFER_END)) {
spi->control &= ~NIOS_SPI_SSO;
}
- if(chipsel != NULL) {
- chipsel(0); /* deselect the target chip */
- }
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
- memdump((void*)din, (bitlen + 7) / 8);
+ memdump(din, (bitlen + 7) / 8);
return 0;
}
diff --git a/cpu/ppc4xx/commproc.c b/cpu/ppc4xx/commproc.c
index 22156dd..8b2954c 100644
--- a/cpu/ppc4xx/commproc.c
+++ b/cpu/ppc4xx/commproc.c
@@ -30,29 +30,25 @@
#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-#if defined(CFG_POST_ALT_WORD_ADDR)
-void post_word_store (ulong a)
-{
- out_be32((void *)CFG_POST_ALT_WORD_ADDR, a);
-}
+#if defined(CFG_POST_WORD_ADDR)
+# define _POST_ADDR ((CFG_OCM_DATA_ADDR) + (CFG_POST_WORD_ADDR))
+#elif defined(CFG_POST_ALT_WORD_ADDR)
+# define _POST_ADDR (CFG_POST_ALT_WORD_ADDR)
+#endif
-ulong post_word_load (void)
-{
- return in_be32((void *)CFG_POST_ALT_WORD_ADDR);
-}
-#else /* CFG_POST_ALT_WORD_ADDR */
void post_word_store (ulong a)
{
- volatile void *save_addr = (volatile void *)(CFG_OCM_DATA_ADDR + CFG_POST_WORD_ADDR);
- *(volatile ulong *) save_addr = a;
+ volatile void *save_addr = (volatile void *)(_POST_ADDR);
+
+ out_be32(save_addr, a);
}
ulong post_word_load (void)
{
- volatile void *save_addr = (volatile void *)(CFG_OCM_DATA_ADDR + CFG_POST_WORD_ADDR);
- return *(volatile ulong *) save_addr;
+ volatile void *save_addr = (volatile void *)(_POST_ADDR);
+
+ return in_be32(save_addr);
}
-#endif /* CFG_POST_ALT_WORD_ADDR */
#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
diff --git a/disk/part.c b/disk/part.c
index 316e254..5c4bf6b 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -109,7 +109,7 @@ void dev_print (block_dev_desc_t *dev_desc)
lbaint_t lba512;
#endif
- switch (dev_desc->type) {
+ switch (dev_desc->if_type) {
case IF_TYPE_SCSI:
printf ("(%d:%d) Vendor: %s Prod.: %s Rev: %s\n",
dev_desc->target,dev_desc->lun,
@@ -124,7 +124,7 @@ void dev_print (block_dev_desc_t *dev_desc)
dev_desc->revision,
dev_desc->product);
break;
- case DEV_TYPE_UNKNOWN:
+ case IF_TYPE_UNKNOWN:
default:
puts ("not available\n");
return;
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index e29b294..c348517 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -47,6 +47,19 @@ int dtt_read(int sensor, int reg)
int dlen;
uchar data[2];
+#ifdef CONFIG_DTT_AD7414
+ /*
+ * On AD7414 the first value upon bootup is not read correctly.
+ * This is most likely because of the 800ms update time of the
+ * temp register in normal update mode. To get current values
+ * each time we issue the "dtt" command including upon powerup
+ * we switch into one-short mode.
+ *
+ * Issue one-shot mode command
+ */
+ dtt_write(sensor, DTT_CONFIG, 0x64);
+#endif
+
/*
* Validate 'reg' param
*/
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 68ab55f..d84f0fc 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -1720,6 +1720,8 @@ ulong flash_get_size (ulong base, int banknum)
int erase_region_count;
struct cfi_qry qry;
+ memset(&qry, 0, sizeof(qry));
+
info->ext_addr = 0;
info->cfi_version = 0;
#ifdef CFG_FLASH_PROTECTION
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 6c5624a..c82f77b 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -153,6 +153,13 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
priv_nand->bbt = NULL;
}
+ if (erase_length < meminfo->erasesize) {
+ printf("Warning: Erase size 0x%08x smaller than one " \
+ "erase block 0x%08x\n",erase_length, meminfo->erasesize);
+ printf(" Erasing 0x%08x instead\n", meminfo->erasesize);
+ erase_length = meminfo->erasesize;
+ }
+
for (;
erase.addr < opts->offset + erase_length;
erase.addr += meminfo->erasesize) {
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
new file mode 100644
index 0000000..af6af97
--- /dev/null
+++ b/drivers/mtd/spi/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libspi_flash.a
+
+COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o
+COBJS-$(CONFIG_SPI_FLASH_ATMEL) += atmel.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/mtd/spi/atmel.c b/drivers/mtd/spi/atmel.c
new file mode 100644
index 0000000..fb7a4a9
--- /dev/null
+++ b/drivers/mtd/spi/atmel.c
@@ -0,0 +1,362 @@
+/*
+ * Atmel SPI DataFlash support
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ */
+#define DEBUG
+#include <common.h>
+#include <malloc.h>
+#include <spi_flash.h>
+
+#include "spi_flash_internal.h"
+
+/* AT45-specific commands */
+#define CMD_AT45_READ_STATUS 0xd7
+#define CMD_AT45_ERASE_PAGE 0x81
+#define CMD_AT45_LOAD_PROG_BUF1 0x82
+#define CMD_AT45_LOAD_BUF1 0x84
+#define CMD_AT45_LOAD_PROG_BUF2 0x85
+#define CMD_AT45_LOAD_BUF2 0x87
+#define CMD_AT45_PROG_BUF1 0x88
+#define CMD_AT45_PROG_BUF2 0x89
+
+/* AT45 status register bits */
+#define AT45_STATUS_P2_PAGE_SIZE (1 << 0)
+#define AT45_STATUS_READY (1 << 7)
+
+/* DataFlash family IDs, as obtained from the second idcode byte */
+#define DF_FAMILY_AT26F 0
+#define DF_FAMILY_AT45 1
+#define DF_FAMILY_AT26DF 2 /* AT25DF and AT26DF */
+
+struct atmel_spi_flash_params {
+ u8 idcode1;
+ /* Log2 of page size in power-of-two mode */
+ u8 l2_page_size;
+ u8 pages_per_block;
+ u8 blocks_per_sector;
+ u8 nr_sectors;
+ const char *name;
+};
+
+struct atmel_spi_flash {
+ const struct atmel_spi_flash_params *params;
+ struct spi_flash flash;
+};
+
+static inline struct atmel_spi_flash *
+to_atmel_spi_flash(struct spi_flash *flash)
+{
+ return container_of(flash, struct atmel_spi_flash, flash);
+}
+
+static const struct atmel_spi_flash_params atmel_spi_flash_table[] = {
+ {
+ .idcode1 = 0x28,
+ .l2_page_size = 10,
+ .pages_per_block = 8,
+ .blocks_per_sector = 32,
+ .nr_sectors = 32,
+ .name = "AT45DB642D",
+ },
+};
+
+static int at45_wait_ready(struct spi_flash *flash, unsigned long timeout)
+{
+ struct spi_slave *spi = flash->spi;
+ unsigned long timebase;
+ int ret;
+ u8 cmd = CMD_AT45_READ_STATUS;
+ u8 status;
+
+ timebase = get_timer(0);
+
+ ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
+ if (ret)
+ return -1;
+
+ do {
+ ret = spi_xfer(spi, 8, NULL, &status, 0);
+ if (ret)
+ return -1;
+
+ if (status & AT45_STATUS_READY)
+ break;
+ } while (get_timer(timebase) < timeout);
+
+ /* Deactivate CS */
+ spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
+
+ if (status & AT45_STATUS_READY)
+ return 0;
+
+ /* Timed out */
+ return -1;
+}
+
+/*
+ * Assemble the address part of a command for AT45 devices in
+ * non-power-of-two page size mode.
+ */
+static void at45_build_address(struct atmel_spi_flash *asf, u8 *cmd, u32 offset)
+{
+ unsigned long page_addr;
+ unsigned long byte_addr;
+ unsigned long page_size;
+ unsigned int page_shift;
+
+ /*
+ * The "extra" space per page is the power-of-two page size
+ * divided by 32.
+ */
+ page_shift = asf->params->l2_page_size;
+ page_size = (1 << page_shift) + (1 << (page_shift - 5));
+ page_shift++;
+ page_addr = offset / page_size;
+ byte_addr = offset % page_size;
+
+ cmd[0] = page_addr >> (16 - page_shift);
+ cmd[1] = page_addr << (page_shift - 8) | (byte_addr >> 8);
+ cmd[2] = byte_addr;
+}
+
+static int dataflash_read_fast_p2(struct spi_flash *flash,
+ u32 offset, size_t len, void *buf)
+{
+ u8 cmd[5];
+
+ cmd[0] = CMD_READ_ARRAY_FAST;
+ cmd[1] = offset >> 16;
+ cmd[2] = offset >> 8;
+ cmd[3] = offset;
+ cmd[4] = 0x00;
+
+ return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len);
+}
+
+static int dataflash_read_fast_at45(struct spi_flash *flash,
+ u32 offset, size_t len, void *buf)
+{
+ struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
+ u8 cmd[5];
+
+ cmd[0] = CMD_READ_ARRAY_FAST;
+ at45_build_address(asf, cmd + 1, offset);
+ cmd[4] = 0x00;
+
+ return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len);
+}
+
+static int dataflash_write_at45(struct spi_flash *flash,
+ u32 offset, size_t len, const void *buf)
+{
+ struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
+ unsigned long page_addr;
+ unsigned long byte_addr;
+ unsigned long page_size;
+ unsigned int page_shift;
+ size_t chunk_len;
+ size_t actual;
+ int ret;
+ u8 cmd[4];
+
+ page_shift = asf->params->l2_page_size;
+ page_size = (1 << page_shift) + (1 << (page_shift - 5));
+ page_shift++;
+ page_addr = offset / page_size;
+ byte_addr = offset % page_size;
+
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+ debug("SF: Unable to claim SPI bus\n");
+ return ret;
+ }
+
+ for (actual = 0; actual < len; actual += chunk_len) {
+ chunk_len = min(len - actual, page_size - byte_addr);
+
+ /* Use the same address bits for both commands */
+ cmd[0] = CMD_AT45_LOAD_BUF1;
+ cmd[1] = page_addr >> (16 - page_shift);
+ cmd[2] = page_addr << (page_shift - 8) | (byte_addr >> 8);
+ cmd[3] = byte_addr;
+
+ ret = spi_flash_cmd_write(flash->spi, cmd, 4,
+ buf + actual, chunk_len);
+ if (ret < 0) {
+ debug("SF: Loading AT45 buffer failed\n");
+ goto out;
+ }
+
+ cmd[0] = CMD_AT45_PROG_BUF1;
+ ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
+ if (ret < 0) {
+ debug("SF: AT45 page programming failed\n");
+ goto out;
+ }
+
+ ret = at45_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
+ if (ret < 0) {
+ debug("SF: AT45 page programming timed out\n");
+ goto out;
+ }
+
+ page_addr++;
+ byte_addr = 0;
+ }
+
+ debug("SF: AT45: Successfully programmed %u bytes @ 0x%x\n",
+ len, offset);
+ ret = 0;
+
+out:
+ spi_release_bus(flash->spi);
+ return ret;
+}
+
+int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len)
+{
+ struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
+ unsigned long page_addr;
+ unsigned long page_size;
+ unsigned int page_shift;
+ size_t actual;
+ int ret;
+ u8 cmd[4];
+
+ /*
+ * TODO: This function currently uses page erase only. We can
+ * probably speed things up by using block and/or sector erase
+ * when possible.
+ */
+
+ page_shift = asf->params->l2_page_size;
+ page_size = (1 << page_shift) + (1 << (page_shift - 5));
+ page_shift++;
+ page_addr = offset / page_size;
+
+ if (offset % page_size || len % page_size) {
+ debug("SF: Erase offset/length not multiple of page size\n");
+ return -1;
+ }
+
+ cmd[0] = CMD_AT45_ERASE_PAGE;
+ cmd[3] = 0x00;
+
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+ debug("SF: Unable to claim SPI bus\n");
+ return ret;
+ }
+
+ for (actual = 0; actual < len; actual += page_size) {
+ cmd[1] = page_addr >> (16 - page_shift);
+ cmd[2] = page_addr << (page_shift - 8);
+
+ ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
+ if (ret < 0) {
+ debug("SF: AT45 page erase failed\n");
+ goto out;
+ }
+
+ ret = at45_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
+ if (ret < 0) {
+ debug("SF: AT45 page erase timed out\n");
+ goto out;
+ }
+
+ page_addr++;
+ }
+
+ debug("SF: AT45: Successfully erased %u bytes @ 0x%x\n",
+ len, offset);
+ ret = 0;
+
+out:
+ spi_release_bus(flash->spi);
+ return ret;
+}
+
+struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode)
+{
+ const struct atmel_spi_flash_params *params;
+ unsigned long page_size;
+ unsigned int family;
+ struct atmel_spi_flash *asf;
+ unsigned int i;
+ int ret;
+ u8 status;
+
+ for (i = 0; i < ARRAY_SIZE(atmel_spi_flash_table); i++) {
+ params = &atmel_spi_flash_table[i];
+ if (params->idcode1 == idcode[1])
+ break;
+ }
+
+ if (i == ARRAY_SIZE(atmel_spi_flash_table)) {
+ debug("SF: Unsupported DataFlash ID %02x\n",
+ idcode[1]);
+ return NULL;
+ }
+
+ asf = malloc(sizeof(struct atmel_spi_flash));
+ if (!asf) {
+ debug("SF: Failed to allocate memory\n");
+ return NULL;
+ }
+
+ asf->params = params;
+ asf->flash.spi = spi;
+ asf->flash.name = params->name;
+
+ /* Assuming power-of-two page size initially. */
+ page_size = 1 << params->l2_page_size;
+
+ family = idcode[1] >> 5;
+
+ switch (family) {
+ case DF_FAMILY_AT45:
+ /*
+ * AT45 chips have configurable page size. The status
+ * register indicates which configuration is active.
+ */
+ ret = spi_flash_cmd(spi, CMD_AT45_READ_STATUS, &status, 1);
+ if (ret)
+ goto err;
+
+ debug("SF: AT45 status register: %02x\n", status);
+
+ if (!(status & AT45_STATUS_P2_PAGE_SIZE)) {
+ asf->flash.read = dataflash_read_fast_at45;
+ asf->flash.write = dataflash_write_at45;
+ asf->flash.erase = dataflash_erase_at45;
+ page_size += 1 << (params->l2_page_size - 5);
+ } else {
+ asf->flash.read = dataflash_read_fast_p2;
+ }
+
+ break;
+
+ case DF_FAMILY_AT26F:
+ case DF_FAMILY_AT26DF:
+ asf->flash.read = dataflash_read_fast_p2;
+ break;
+
+ default:
+ debug("SF: Unsupported DataFlash family %u\n", family);
+ goto err;
+ }
+
+ asf->flash.size = page_size * params->pages_per_block
+ * params->blocks_per_sector
+ * params->nr_sectors;
+
+ debug("SF: Detected %s with page size %u, total %u bytes\n",
+ params->name, page_size, asf->flash.size);
+
+ return &asf->flash;
+
+err:
+ free(asf);
+ return NULL;
+}
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
new file mode 100644
index 0000000..d581cb3
--- /dev/null
+++ b/drivers/mtd/spi/spi_flash.c
@@ -0,0 +1,162 @@
+/*
+ * SPI flash interface
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ */
+#define DEBUG
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <spi_flash.h>
+
+#include "spi_flash_internal.h"
+
+int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len)
+{
+ unsigned long flags = SPI_XFER_BEGIN;
+ int ret;
+
+ if (len == 0)
+ flags |= SPI_XFER_END;
+
+ ret = spi_xfer(spi, 8, &cmd, NULL, flags);
+ if (ret) {
+ debug("SF: Failed to send command %02x: %d\n", cmd, ret);
+ return ret;
+ }
+
+ if (len) {
+ ret = spi_xfer(spi, len * 8, NULL, response, SPI_XFER_END);
+ if (ret)
+ debug("SF: Failed to read response (%zu bytes): %d\n",
+ len, ret);
+ }
+
+ return ret;
+}
+
+int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
+ size_t cmd_len, void *data, size_t data_len)
+{
+ unsigned long flags = SPI_XFER_BEGIN;
+ int ret;
+
+ if (data_len == 0)
+ flags |= SPI_XFER_END;
+
+ ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
+ if (ret) {
+ debug("SF: Failed to send read command (%zu bytes): %d\n",
+ cmd_len, ret);
+ } else if (data_len != 0) {
+ ret = spi_xfer(spi, data_len * 8, NULL, data, SPI_XFER_END);
+ if (ret)
+ debug("SF: Failed to read %zu bytes of data: %d\n",
+ data_len, ret);
+ }
+
+ return ret;
+}
+
+int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
+ const void *data, size_t data_len)
+{
+ unsigned long flags = SPI_XFER_BEGIN;
+ int ret;
+
+ if (data_len == 0)
+ flags |= SPI_XFER_END;
+
+ ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
+ if (ret) {
+ debug("SF: Failed to send read command (%zu bytes): %d\n",
+ cmd_len, ret);
+ } else if (data_len != 0) {
+ ret = spi_xfer(spi, data_len * 8, data, NULL, SPI_XFER_END);
+ if (ret)
+ debug("SF: Failed to read %zu bytes of data: %d\n",
+ data_len, ret);
+ }
+
+ return ret;
+}
+
+
+int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
+ size_t cmd_len, void *data, size_t data_len)
+{
+ struct spi_slave *spi = flash->spi;
+ int ret;
+
+ spi_claim_bus(spi);
+ ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len);
+ spi_release_bus(spi);
+
+ return ret;
+}
+
+struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int spi_mode)
+{
+ struct spi_slave *spi;
+ struct spi_flash *flash;
+ int ret;
+ u8 idcode[3];
+
+ spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
+ if (!spi) {
+ debug("SF: Failed to set up slave\n");
+ return NULL;
+ }
+
+ ret = spi_claim_bus(spi);
+ if (ret) {
+ debug("SF: Failed to claim SPI bus: %d\n", ret);
+ goto err_claim_bus;
+ }
+
+ /* Read the ID codes */
+ ret = spi_flash_cmd(spi, CMD_READ_ID, &idcode, sizeof(idcode));
+ if (ret)
+ goto err_read_id;
+
+ debug("SF: Got idcode %02x %02x %02x\n", idcode[0],
+ idcode[1], idcode[2]);
+
+ switch (idcode[0]) {
+#ifdef CONFIG_SPI_FLASH_SPANSION
+ case 0x01:
+ flash = spi_flash_probe_spansion(spi, idcode);
+ break;
+#endif
+#ifdef CONFIG_SPI_FLASH_ATMEL
+ case 0x1F:
+ flash = spi_flash_probe_atmel(spi, idcode);
+ break;
+#endif
+ default:
+ debug("SF: Unsupported manufacturer %02X\n", idcode[0]);
+ flash = NULL;
+ break;
+ }
+
+ if (!flash)
+ goto err_manufacturer_probe;
+
+ spi_release_bus(spi);
+
+ return flash;
+
+err_manufacturer_probe:
+err_read_id:
+ spi_release_bus(spi);
+err_claim_bus:
+ spi_free_slave(spi);
+ return NULL;
+}
+
+void spi_flash_free(struct spi_flash *flash)
+{
+ spi_free_slave(flash->spi);
+ free(flash);
+}
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
new file mode 100644
index 0000000..1438050
--- /dev/null
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -0,0 +1,45 @@
+/*
+ * SPI flash internal definitions
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ */
+
+/* Common parameters */
+#define SPI_FLASH_PROG_TIMEOUT ((10 * CFG_HZ) / 1000)
+#define SPI_FLASH_PAGE_ERASE_TIMEOUT ((50 * CFG_HZ) / 1000)
+#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CFG_HZ)
+
+/* Common commands */
+#define CMD_READ_ID 0x9f
+
+#define CMD_READ_ARRAY_SLOW 0x03
+#define CMD_READ_ARRAY_FAST 0x0b
+#define CMD_READ_ARRAY_LEGACY 0xe8
+
+/* Send a single-byte command to the device and read the response */
+int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
+
+/*
+ * Send a multi-byte command to the device and read the response. Used
+ * for flash array reads, etc.
+ */
+int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
+ size_t cmd_len, void *data, size_t data_len);
+
+/*
+ * Send a multi-byte command to the device followed by (optional)
+ * data. Used for programming the flash array, etc.
+ */
+int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
+ const void *data, size_t data_len);
+
+/*
+ * Same as spi_flash_cmd_read() except it also claims/releases the SPI
+ * bus. Used as common part of the ->read() operation.
+ */
+int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
+ size_t cmd_len, void *data, size_t data_len);
+
+/* Manufacturer-specific probe functions */
+struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);
+struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode);
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 01e2f14..68901cd 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -300,8 +300,10 @@ eth_init(bd_t * bd)
DM9000_iow(DM9000_ISR, 0x0f); /* Clear interrupt status */
/* Set Node address */
+#ifndef CONFIG_AT91SAM9261EK
for (i = 0; i < 6; i++)
((u16 *) bd->bi_enetaddr)[i] = read_srom_word(i);
+#endif
if (is_zero_ether_addr(bd->bi_enetaddr) ||
is_multicast_ether_addr(bd->bi_enetaddr)) {
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 703784e..e5733f6 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -417,13 +417,15 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
/* choose RMII or MII mode. This depends on the board */
#ifdef CONFIG_RMII
-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260)
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+ defined(CONFIG_AT91SAM9263)
macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
#else
macb_writel(macb, USRIO, 0);
#endif
#else
-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260)
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+ defined(CONFIG_AT91SAM9263)
macb_writel(macb, USRIO, MACB_BIT(CLKEN));
#else
macb_writel(macb, USRIO, MACB_BIT(MII));
diff --git a/drivers/rtc/ds1306.c b/drivers/rtc/ds1306.c
index 1c8ac7f..29854fc 100644
--- a/drivers/rtc/ds1306.c
+++ b/drivers/rtc/ds1306.c
@@ -62,13 +62,6 @@
#define RTC_USER_RAM_BASE 0x20
-/*
- * External table of chip select functions (see the appropriate board
- * support for the actual definition of the table).
- */
-extern spi_chipsel_type spi_chipsel[];
-extern int spi_chipsel_cnt;
-
static unsigned int bin2bcd (unsigned int n);
static unsigned char bcd2bin (unsigned char c);
@@ -305,11 +298,29 @@ void rtc_reset (void)
static unsigned char rtc_read (unsigned char reg);
static void rtc_write (unsigned char reg, unsigned char val);
+static struct spi_slave *slave;
+
/* read clock time from DS1306 and return it in *tmp */
int rtc_get (struct rtc_time *tmp)
{
unsigned char sec, min, hour, mday, wday, mon, year;
+ /*
+ * Assuming Vcc = 2.0V (lowest speed)
+ *
+ * REVISIT: If we add an rtc_init() function we can do this
+ * step just once.
+ */
+ if (!slave) {
+ slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+ SPI_MODE_3 | SPI_CS_HIGH);
+ if (!slave)
+ return;
+ }
+
+ if (spi_claim_bus(slave))
+ return;
+
sec = rtc_read (RTC_SECONDS);
min = rtc_read (RTC_MINUTES);
hour = rtc_read (RTC_HOURS);
@@ -318,6 +329,8 @@ int rtc_get (struct rtc_time *tmp)
mon = rtc_read (RTC_MONTH);
year = rtc_read (RTC_YEAR);
+ spi_release_bus(slave);
+
debug ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
"hr: %02x min: %02x sec: %02x\n",
year, mon, mday, wday, hour, min, sec);
@@ -360,6 +373,17 @@ int rtc_get (struct rtc_time *tmp)
/* set clock time from *tmp in DS1306 RTC */
void rtc_set (struct rtc_time *tmp)
{
+ /* Assuming Vcc = 2.0V (lowest speed) */
+ if (!slave) {
+ slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+ SPI_MODE_3 | SPI_CS_HIGH);
+ if (!slave)
+ return;
+ }
+
+ if (spi_claim_bus(slave))
+ return;
+
debug ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
@@ -371,6 +395,8 @@ void rtc_set (struct rtc_time *tmp)
rtc_write (RTC_DATE_OF_MONTH, bin2bcd (tmp->tm_mday));
rtc_write (RTC_MONTH, bin2bcd (tmp->tm_mon));
rtc_write (RTC_YEAR, bin2bcd (tmp->tm_year - 2000));
+
+ spi_release_bus(slave);
}
/* ------------------------------------------------------------------------- */
@@ -378,6 +404,17 @@ void rtc_set (struct rtc_time *tmp)
/* reset the DS1306 */
void rtc_reset (void)
{
+ /* Assuming Vcc = 2.0V (lowest speed) */
+ if (!slave) {
+ slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+ SPI_MODE_3 | SPI_CS_HIGH);
+ if (!slave)
+ return;
+ }
+
+ if (spi_claim_bus(slave))
+ return;
+
/* clear the control register */
rtc_write (RTC_CONTROL, 0x00); /* 1st step: reset WP */
rtc_write (RTC_CONTROL, 0x00); /* 2nd step: reset 1Hz, AIE1, AIE0 */
@@ -391,22 +428,18 @@ void rtc_reset (void)
rtc_write (RTC_HOURS_ALARM1, 0x00);
rtc_write (RTC_DAY_OF_WEEK_ALARM0, 0x00);
rtc_write (RTC_DAY_OF_WEEK_ALARM1, 0x00);
+
+ spi_release_bus(slave);
}
/* ------------------------------------------------------------------------- */
static unsigned char rtc_read (unsigned char reg)
{
- unsigned char dout[2]; /* SPI Output Data Bytes */
- unsigned char din[2]; /* SPI Input Data Bytes */
-
- dout[0] = reg;
+ int ret;
- if (spi_xfer (spi_chipsel[CFG_SPI_RTC_DEVID], 16, dout, din) != 0) {
- return 0;
- } else {
- return din[1];
- }
+ ret = spi_w8r8(slave, reg);
+ return ret < 0 ? 0 : ret;
}
/* ------------------------------------------------------------------------- */
@@ -419,7 +452,7 @@ static void rtc_write (unsigned char reg, unsigned char val)
dout[0] = 0x80 | reg;
dout[1] = val;
- spi_xfer (spi_chipsel[CFG_SPI_RTC_DEVID], 16, dout, din);
+ spi_xfer (slave, 16, dout, din, SPI_XFER_BEGIN | SPI_XFER_END);
}
#endif /* end of code exclusion (see #ifdef CONFIG_SXNI855T above) */
diff --git a/drivers/rtc/mc13783-rtc.c b/drivers/rtc/mc13783-rtc.c
index 35b1b8b..b6e1501 100644
--- a/drivers/rtc/mc13783-rtc.c
+++ b/drivers/rtc/mc13783-rtc.c
@@ -24,34 +24,50 @@
#include <rtc.h>
#include <spi.h>
+static struct spi_slave *slave;
+
int rtc_get(struct rtc_time *rtc)
{
u32 day1, day2, time;
u32 reg;
int err, tim, i = 0;
- spi_select(1, 0, SPI_MODE_2 | SPI_CS_HIGH);
+ if (!slave) {
+ /* FIXME: Verify the max SCK rate */
+ slave = spi_setup_slave(1, 0, 1000000,
+ SPI_MODE_2 | SPI_CS_HIGH);
+ if (!slave)
+ return -1;
+ }
+
+ if (spi_claim_bus(slave))
+ return -1;
do {
reg = 0x2c000000;
- err = spi_xfer(0, 32, (uchar *)&reg, (uchar *)&day1);
+ err = spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&day1,
+ SPI_XFER_BEGIN | SPI_XFER_END);
if (err)
return err;
reg = 0x28000000;
- err = spi_xfer(0, 32, (uchar *)&reg, (uchar *)&time);
+ err = spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&time,
+ SPI_XFER_BEGIN | SPI_XFER_END);
if (err)
return err;
reg = 0x2c000000;
- err = spi_xfer(0, 32, (uchar *)&reg, (uchar *)&day2);
+ err = spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&day2,
+ SPI_XFER_BEGIN | SPI_XFER_END);
if (err)
return err;
} while (day1 != day2 && i++ < 3);
+ spi_release_bus(slave);
+
tim = day1 * 86400 + time;
to_tm(tim, rtc);
@@ -65,16 +81,31 @@ void rtc_set(struct rtc_time *rtc)
{
u32 time, day, reg;
+ if (!slave) {
+ /* FIXME: Verify the max SCK rate */
+ slave = spi_setup_slave(1, 0, 1000000,
+ SPI_MODE_2 | SPI_CS_HIGH);
+ if (!slave)
+ return;
+ }
+
time = mktime(rtc->tm_year, rtc->tm_mon, rtc->tm_mday,
rtc->tm_hour, rtc->tm_min, rtc->tm_sec);
day = time / 86400;
time %= 86400;
+ if (spi_claim_bus(slave))
+ return;
+
reg = 0x2c000000 | day | 0x80000000;
- spi_xfer(0, 32, (uchar *)&reg, (uchar *)&day);
+ spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&day,
+ SPI_XFER_BEGIN | SPI_XFER_END);
reg = 0x28000000 | time | 0x80000000;
- spi_xfer(0, 32, (uchar *)&reg, (uchar *)&time);
+ spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&time,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+
+ spi_release_bus(slave);
}
void rtc_reset(void)
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index bc8a104..e66e0ee 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libspi.a
COBJS-y += mpc8xxx_spi.o
+COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o
COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
COBJS := $(COBJS-y)
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
new file mode 100644
index 0000000..317c0b4
--- /dev/null
+++ b/drivers/spi/atmel_spi.c
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <spi.h>
+#include <malloc.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
+
+#include "atmel_spi.h"
+
+void spi_init()
+{
+
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct atmel_spi_slave *as;
+ unsigned int scbr;
+ u32 csrx;
+ void *regs;
+
+ if (cs > 3 || !spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ switch (bus) {
+ case 0:
+ regs = (void *)SPI0_BASE;
+ break;
+#ifdef SPI1_BASE
+ case 1:
+ regs = (void *)SPI1_BASE;
+ break;
+#endif
+#ifdef SPI2_BASE
+ case 2:
+ regs = (void *)SPI2_BASE;
+ break;
+#endif
+#ifdef SPI3_BASE
+ case 3:
+ regs = (void *)SPI3_BASE;
+ break;
+#endif
+ default:
+ return NULL;
+ }
+
+
+ scbr = (get_spi_clk_rate(bus) + max_hz - 1) / max_hz;
+ if (scbr > ATMEL_SPI_CSRx_SCBR_MAX)
+ /* Too low max SCK rate */
+ return NULL;
+ if (scbr < 1)
+ scbr = 1;
+
+ csrx = ATMEL_SPI_CSRx_SCBR(scbr);
+ csrx |= ATMEL_SPI_CSRx_BITS(ATMEL_SPI_BITS_8);
+ if (!(mode & SPI_CPHA))
+ csrx |= ATMEL_SPI_CSRx_NCPHA;
+ if (mode & SPI_CPOL)
+ csrx |= ATMEL_SPI_CSRx_CPOL;
+
+ as = malloc(sizeof(struct atmel_spi_slave));
+ if (!as)
+ return NULL;
+
+ as->slave.bus = bus;
+ as->slave.cs = cs;
+ as->regs = regs;
+ as->mr = ATMEL_SPI_MR_MSTR | ATMEL_SPI_MR_MODFDIS
+ | ATMEL_SPI_MR_PCS(~(1 << cs) & 0xf);
+ spi_writel(as, CSR(cs), csrx);
+
+ return &as->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct atmel_spi_slave *as = to_atmel_spi(slave);
+
+ free(as);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct atmel_spi_slave *as = to_atmel_spi(slave);
+
+ /* Enable the SPI hardware */
+ spi_writel(as, CR, ATMEL_SPI_CR_SPIEN);
+
+ /*
+ * Select the slave. This should set SCK to the correct
+ * initial state, etc.
+ */
+ spi_writel(as, MR, as->mr);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ struct atmel_spi_slave *as = to_atmel_spi(slave);
+
+ /* Disable the SPI hardware */
+ spi_writel(as, CR, ATMEL_SPI_CR_SPIDIS);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct atmel_spi_slave *as = to_atmel_spi(slave);
+ unsigned int len_tx;
+ unsigned int len_rx;
+ unsigned int len;
+ int ret;
+ u32 status;
+ const u8 *txp = dout;
+ u8 *rxp = din;
+ u8 value;
+
+ ret = 0;
+ if (bitlen == 0)
+ /* Finish any previously submitted transfers */
+ goto out;
+
+ /*
+ * TODO: The controller can do non-multiple-of-8 bit
+ * transfers, but this driver currently doesn't support it.
+ *
+ * It's also not clear how such transfers are supposed to be
+ * represented as a stream of bytes...this is a limitation of
+ * the current SPI interface.
+ */
+ if (bitlen % 8) {
+ /* Errors always terminate an ongoing transfer */
+ flags |= SPI_XFER_END;
+ goto out;
+ }
+
+ len = bitlen / 8;
+
+ /*
+ * The controller can do automatic CS control, but it is
+ * somewhat quirky, and it doesn't really buy us much anyway
+ * in the context of U-Boot.
+ */
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
+
+ for (len_tx = 0, len_rx = 0; len_rx < len; ) {
+ status = spi_readl(as, SR);
+
+ if (status & ATMEL_SPI_SR_OVRES)
+ return -1;
+
+ if (len_tx < len && (status & ATMEL_SPI_SR_TDRE)) {
+ if (txp)
+ value = *txp++;
+ else
+ value = 0;
+ spi_writel(as, TDR, value);
+ len_tx++;
+ }
+ if (status & ATMEL_SPI_SR_RDRF) {
+ value = spi_readl(as, RDR);
+ if (rxp)
+ *rxp++ = value;
+ len_rx++;
+ }
+ }
+
+out:
+ if (flags & SPI_XFER_END) {
+ /*
+ * Wait until the transfer is completely done before
+ * we deactivate CS.
+ */
+ do {
+ status = spi_readl(as, SR);
+ } while (!(status & ATMEL_SPI_SR_TXEMPTY));
+
+ spi_cs_deactivate(slave);
+ }
+
+ return 0;
+}
diff --git a/drivers/spi/atmel_spi.h b/drivers/spi/atmel_spi.h
new file mode 100644
index 0000000..8b69a6d
--- /dev/null
+++ b/drivers/spi/atmel_spi.h
@@ -0,0 +1,95 @@
+/*
+ * Register definitions for the Atmel AT32/AT91 SPI Controller
+ */
+
+/* Register offsets */
+#define ATMEL_SPI_CR 0x0000
+#define ATMEL_SPI_MR 0x0004
+#define ATMEL_SPI_RDR 0x0008
+#define ATMEL_SPI_TDR 0x000c
+#define ATMEL_SPI_SR 0x0010
+#define ATMEL_SPI_IER 0x0014
+#define ATMEL_SPI_IDR 0x0018
+#define ATMEL_SPI_IMR 0x001c
+#define ATMEL_SPI_CSR(x) (0x0030 + 4 * (x))
+#define ATMEL_SPI_VERSION 0x00fc
+
+/* Bits in CR */
+#define ATMEL_SPI_CR_SPIEN (1 << 0)
+#define ATMEL_SPI_CR_SPIDIS (1 << 1)
+#define ATMEL_SPI_CR_SWRST (1 << 7)
+#define ATMEL_SPI_CR_LASTXFER (1 << 24)
+
+/* Bits in MR */
+#define ATMEL_SPI_MR_MSTR (1 << 0)
+#define ATMEL_SPI_MR_PS (1 << 1)
+#define ATMEL_SPI_MR_PCSDEC (1 << 2)
+#define ATMEL_SPI_MR_FDIV (1 << 3)
+#define ATMEL_SPI_MR_MODFDIS (1 << 4)
+#define ATMEL_SPI_MR_LLB (1 << 7)
+#define ATMEL_SPI_MR_PCS(x) (((x) & 15) << 16)
+#define ATMEL_SPI_MR_DLYBCS(x) ((x) << 24)
+
+/* Bits in RDR */
+#define ATMEL_SPI_RDR_RD(x) (x)
+#define ATMEL_SPI_RDR_PCS(x) ((x) << 16)
+
+/* Bits in TDR */
+#define ATMEL_SPI_TDR_TD(x) (x)
+#define ATMEL_SPI_TDR_PCS(x) ((x) << 16)
+#define ATMEL_SPI_TDR_LASTXFER (1 << 24)
+
+/* Bits in SR/IER/IDR/IMR */
+#define ATMEL_SPI_SR_RDRF (1 << 0)
+#define ATMEL_SPI_SR_TDRE (1 << 1)
+#define ATMEL_SPI_SR_MODF (1 << 2)
+#define ATMEL_SPI_SR_OVRES (1 << 3)
+#define ATMEL_SPI_SR_ENDRX (1 << 4)
+#define ATMEL_SPI_SR_ENDTX (1 << 5)
+#define ATMEL_SPI_SR_RXBUFF (1 << 6)
+#define ATMEL_SPI_SR_TXBUFE (1 << 7)
+#define ATMEL_SPI_SR_NSSR (1 << 8)
+#define ATMEL_SPI_SR_TXEMPTY (1 << 9)
+#define ATMEL_SPI_SR_SPIENS (1 << 16)
+
+/* Bits in CSRx */
+#define ATMEL_SPI_CSRx_CPOL (1 << 0)
+#define ATMEL_SPI_CSRx_NCPHA (1 << 1)
+#define ATMEL_SPI_CSRx_CSAAT (1 << 3)
+#define ATMEL_SPI_CSRx_BITS(x) ((x) << 4)
+#define ATMEL_SPI_CSRx_SCBR(x) ((x) << 8)
+#define ATMEL_SPI_CSRx_SCBR_MAX 0xff
+#define ATMEL_SPI_CSRx_DLYBS(x) ((x) << 16)
+#define ATMEL_SPI_CSRx_DLYBCT(x) ((x) << 24)
+
+/* Bits in VERSION */
+#define ATMEL_SPI_VERSION_REV(x) ((x) << 0)
+#define ATMEL_SPI_VERSION_MFN(x) ((x) << 16)
+
+/* Constants for CSRx:BITS */
+#define ATMEL_SPI_BITS_8 0
+#define ATMEL_SPI_BITS_9 1
+#define ATMEL_SPI_BITS_10 2
+#define ATMEL_SPI_BITS_11 3
+#define ATMEL_SPI_BITS_12 4
+#define ATMEL_SPI_BITS_13 5
+#define ATMEL_SPI_BITS_14 6
+#define ATMEL_SPI_BITS_15 7
+#define ATMEL_SPI_BITS_16 8
+
+struct atmel_spi_slave {
+ struct spi_slave slave;
+ void *regs;
+ u32 mr;
+};
+
+static inline struct atmel_spi_slave *to_atmel_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct atmel_spi_slave, slave);
+}
+
+/* Register access macros */
+#define spi_readl(as, reg) \
+ readl(as->regs + ATMEL_SPI_##reg)
+#define spi_writel(as, reg, value) \
+ writel(value, as->regs + ATMEL_SPI_##reg)
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
index 2fe838c..136fb50 100644
--- a/drivers/spi/mpc8xxx_spi.c
+++ b/drivers/spi/mpc8xxx_spi.c
@@ -24,6 +24,7 @@
#include <common.h>
#if defined(CONFIG_MPC8XXX_SPI) && defined(CONFIG_HARD_SPI)
+#include <malloc.h>
#include <spi.h>
#include <asm/mpc8xxx_spi.h>
@@ -37,6 +38,34 @@
#define SPI_TIMEOUT 1000
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct spi_slave *slave;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ slave = malloc(sizeof(struct spi_slave));
+ if (!slave)
+ return NULL;
+
+ slave->bus = bus;
+ slave->cs = cs;
+
+ /*
+ * TODO: Some of the code in spi_init() should probably move
+ * here, or into spi_claim_bus() below.
+ */
+
+ return slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ free(slave);
+}
+
void spi_init(void)
{
volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
@@ -53,7 +82,18 @@ void spi_init(void)
spi->com = 0; /* LST bit doesn't do anything, so disregard */
}
-int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
+int spi_claim_bus(struct spi_slave *slave)
+{
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
{
volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
unsigned int tmpdout, tmpdin, event;
@@ -61,11 +101,11 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
int tm, isRead = 0;
unsigned char charSize = 32;
- debug("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
- (int)chipsel, *(uint *) dout, *(uint *) din, bitlen);
+ debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n",
+ slave->bus, slave->cs, *(uint *) dout, *(uint *) din, bitlen);
- if (chipsel != NULL)
- (*chipsel) (1); /* select the target chip */
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
spi->event = 0xffffffff; /* Clear all SPI events */
@@ -135,8 +175,8 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
debug("*** spi_xfer: transfer ended. Value=%08x\n", tmpdin);
}
- if (chipsel != NULL)
- (*chipsel) (0); /* deselect the target chip */
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
return 0;
}
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index c166ec5..5957ada 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -19,6 +19,7 @@
*/
#include <common.h>
+#include <malloc.h>
#include <spi.h>
#include <asm/io.h>
@@ -61,17 +62,18 @@ static unsigned long spi_bases[] = {
0x53f84000,
};
-static unsigned long spi_base;
-
#endif
-spi_chipsel_type spi_chipsel[] = {
- (spi_chipsel_type)0,
- (spi_chipsel_type)1,
- (spi_chipsel_type)2,
- (spi_chipsel_type)3,
+struct mxc_spi_slave {
+ struct spi_slave slave;
+ unsigned long base;
+ u32 ctrl_reg;
};
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+
+static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave)
+{
+ return container_of(slave, struct mxc_spi_slave, slave);
+}
static inline u32 reg_read(unsigned long addr)
{
@@ -83,30 +85,31 @@ static inline void reg_write(unsigned long addr, u32 val)
*(volatile unsigned long*)addr = val;
}
-static u32 spi_xchg_single(u32 data, int bitlen)
+static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen)
{
-
- unsigned int cfg_reg = reg_read(spi_base + MXC_CSPICTRL);
+ struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
+ unsigned int cfg_reg = reg_read(mxcs->base + MXC_CSPICTRL);
if (MXC_CSPICTRL_BITCOUNT(bitlen - 1) != (cfg_reg & MXC_CSPICTRL_BITCOUNT(31))) {
cfg_reg = (cfg_reg & ~MXC_CSPICTRL_BITCOUNT(31)) |
MXC_CSPICTRL_BITCOUNT(bitlen - 1);
- reg_write(spi_base + MXC_CSPICTRL, cfg_reg);
+ reg_write(mxcs->base + MXC_CSPICTRL, cfg_reg);
}
- reg_write(spi_base + MXC_CSPITXDATA, data);
+ reg_write(mxcs->base + MXC_CSPITXDATA, data);
cfg_reg |= MXC_CSPICTRL_XCH;
- reg_write(spi_base + MXC_CSPICTRL, cfg_reg);
+ reg_write(mxcs->base + MXC_CSPICTRL, cfg_reg);
- while (reg_read(spi_base + MXC_CSPICTRL) & MXC_CSPICTRL_XCH)
+ while (reg_read(mxcs->base + MXC_CSPICTRL) & MXC_CSPICTRL_XCH)
;
- return reg_read(spi_base + MXC_CSPIRXDATA);
+ return reg_read(mxcs->base + MXC_CSPIRXDATA);
}
-int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
{
int n_blks = (bitlen + 31) / 32;
u32 *out_l, *in_l;
@@ -117,13 +120,10 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
return 1;
}
- if (!spi_base)
- spi_select(CONFIG_MXC_SPI_IFACE, (int)chipsel, SPI_MODE_2 | SPI_CS_HIGH);
-
for (i = 0, in_l = (u32 *)din, out_l = (u32 *)dout;
i < n_blks;
i++, in_l++, out_l++, bitlen -= 32)
- *in_l = spi_xchg_single(*out_l, bitlen);
+ *in_l = spi_xchg_single(slave, *out_l, bitlen);
return 0;
}
@@ -132,17 +132,17 @@ void spi_init(void)
{
}
-int spi_select(unsigned int bus, unsigned int dev, unsigned long mode)
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
{
unsigned int ctrl_reg;
+ struct mxc_spi_slave *mxcs;
if (bus >= sizeof(spi_bases) / sizeof(spi_bases[0]) ||
- dev > 3)
- return 1;
-
- spi_base = spi_bases[bus];
+ cs > 3)
+ return NULL;
- ctrl_reg = MXC_CSPICTRL_CHIPSELECT(dev) |
+ ctrl_reg = MXC_CSPICTRL_CHIPSELECT(cs) |
MXC_CSPICTRL_BITCOUNT(31) |
MXC_CSPICTRL_DATARATE(7) | /* FIXME: calculate data rate */
MXC_CSPICTRL_EN |
@@ -155,12 +155,38 @@ int spi_select(unsigned int bus, unsigned int dev, unsigned long mode)
if (mode & SPI_CS_HIGH)
ctrl_reg |= MXC_CSPICTRL_SSPOL;
- reg_write(spi_base + MXC_CSPIRESET, 1);
+ mxcs = malloc(sizeof(struct mxc_spi_slave));
+ if (!mxcs)
+ return NULL;
+
+ mxcs->slave.bus = bus;
+ mxcs->slave.cs = cs;
+ mxcs->base = spi_bases[bus];
+ mxcs->ctrl_reg = ctrl_reg;
+
+ return &mxcs->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ free(slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
+
+ reg_write(mxcs->base + MXC_CSPIRESET, 1);
udelay(1);
- reg_write(spi_base + MXC_CSPICTRL, ctrl_reg);
- reg_write(spi_base + MXC_CSPIPERIOD,
+ reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg);
+ reg_write(mxcs->base + MXC_CSPIPERIOD,
MXC_CSPIPERIOD_32KHZ);
- reg_write(spi_base + MXC_CSPIINT, 0);
+ reg_write(mxcs->base + MXC_CSPIINT, 0);
return 0;
}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ /* TODO: Shut the controller down */
+}
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 9d2f65b..20a54c5 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libvideo.a
COBJS-y += ati_radeon_fb.o
+COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
COBJS-y += cfb_console.o
COBJS-y += ct69000.o
COBJS-y += mb862xx.o
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
new file mode 100644
index 0000000..27df449
--- /dev/null
+++ b/drivers/video/atmel_lcdfb.c
@@ -0,0 +1,160 @@
+/*
+ * Driver for AT91/AT32 LCD Controller
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+
+int lcd_line_length;
+int lcd_color_fg;
+int lcd_color_bg;
+
+void *lcd_base; /* Start of framebuffer memory */
+void *lcd_console_address; /* Start of console buffer */
+
+short console_col;
+short console_row;
+
+/* configurable parameters */
+#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
+#define ATMEL_LCDC_DMA_BURST_LEN 8
+
+#if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91CAP9)
+#define ATMEL_LCDC_FIFO_SIZE 2048
+#else
+#define ATMEL_LCDC_FIFO_SIZE 512
+#endif
+
+#define lcdc_readl(mmio, reg) __raw_readl((mmio)+(reg))
+#define lcdc_writel(mmio, reg, val) __raw_writel((val), (mmio)+(reg))
+
+void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
+{
+#if defined(CONFIG_ATMEL_LCD_BGR555)
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno),
+ (red >> 3) | ((green & 0xf8) << 2) | ((blue & 0xf8) << 7));
+#else
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno),
+ (blue >> 3) | ((green & 0xfc) << 3) | ((red & 0xf8) << 8));
+#endif
+}
+
+void lcd_ctrl_init(void *lcdbase)
+{
+ unsigned long value;
+
+ /* Turn off the LCD controller and the DMA controller */
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
+ 1 << ATMEL_LCDC_GUARDT_OFFSET);
+
+ /* Wait for the LCDC core to become idle */
+ while (lcdc_readl(panel_info.mmio, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+ udelay(10);
+
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, 0);
+
+ /* Reset LCDC DMA */
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST);
+
+ /* ...set frame size and burst length = 8 words (?) */
+ value = (panel_info.vl_col * panel_info.vl_row *
+ NBITS(panel_info.vl_bpix)) / 32;
+ value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMAFRMCFG, value);
+
+ /* Set pixel clock */
+ value = get_lcdc_clk_rate(0) / panel_info.vl_clk;
+ if (get_lcdc_clk_rate(0) % panel_info.vl_clk)
+ value++;
+ value = (value / 2) - 1;
+
+ if (!value) {
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
+ } else
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1,
+ value << ATMEL_LCDC_CLKVAL_OFFSET);
+
+ /* Initialize control register 2 */
+ value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
+ if (panel_info.vl_tft)
+ value |= ATMEL_LCDC_DISTYPE_TFT;
+
+ if (!(panel_info.vl_sync & ATMEL_LCDC_INVLINE_INVERTED))
+ value |= ATMEL_LCDC_INVLINE_INVERTED;
+ if (!(panel_info.vl_sync & ATMEL_LCDC_INVFRAME_INVERTED))
+ value |= ATMEL_LCDC_INVFRAME_INVERTED;
+ value |= (panel_info.vl_bpix << 5);
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value);
+
+ /* Vertical timing */
+ value = (panel_info.vl_vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
+ value |= panel_info.vl_upper_margin << ATMEL_LCDC_VBP_OFFSET;
+ value |= panel_info.vl_lower_margin;
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM1, value);
+
+ /* Horizontal timing */
+ value = (panel_info.vl_right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
+ value |= (panel_info.vl_hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
+ value |= (panel_info.vl_left_margin - 1);
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM2, value);
+
+ /* Display size */
+ value = (panel_info.vl_col - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
+ value |= panel_info.vl_row - 1;
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDFRMCFG, value);
+
+ /* FIFO Threshold: Use formula from data sheet */
+ value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_FIFO, value);
+
+ /* Toggle LCD_MODE every frame */
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_MVAL, 0);
+
+ /* Disable all interrupts */
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_IDR, ~0UL);
+
+ /* Set contrast */
+ value = ATMEL_LCDC_PS_DIV8 |
+ ATMEL_LCDC_POL_POSITIVE |
+ ATMEL_LCDC_ENA_PWMENABLE;
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_CTR, value);
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
+
+ /* Set framebuffer DMA base address and pixel offset */
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMABADDR1, (u_long)lcdbase);
+
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN);
+ lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
+ (1 << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+}
+
+ulong calc_fbsize(void)
+{
+ return ((panel_info.vl_col * panel_info.vl_row *
+ NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE;
+}
diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
index 1993dc2..7e27ee1 100644
--- a/fs/jffs2/jffs2_1pass.c
+++ b/fs/jffs2/jffs2_1pass.c
@@ -164,9 +164,6 @@ static struct part_info *current_part;
/* this one defined in nand_legacy.c */
int read_jffs2_nand(size_t start, size_t len,
size_t * retlen, u_char * buf, int nanddev);
-#else
-/* info for NAND chips, defined in drivers/mtd/nand/nand.c */
-extern nand_info_t nand_info[];
#endif
#define NAND_PAGE_SIZE 512
diff --git a/include/ACEX1K.h b/include/ACEX1K.h
index 6ea0eed..354e0f0 100644
--- a/include/ACEX1K.h
+++ b/include/ACEX1K.h
@@ -77,6 +77,8 @@ typedef struct {
#endif
#define Altera_EP1K100_SIZE (166965*8)
+#define Altera_EP2C8_SIZE 247942
+#define Altera_EP2C20_SIZE 586562
#define Altera_EP2C35_SIZE 883905
/* Descriptor Macros
diff --git a/include/asm-arm/arch-at91sam9/at91_pmc.h b/include/asm-arm/arch-at91sam9/at91_pmc.h
index 103be86..b57875d 100644
--- a/include/asm-arm/arch-at91sam9/at91_pmc.h
+++ b/include/asm-arm/arch-at91sam9/at91_pmc.h
@@ -96,4 +96,9 @@
#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
+#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */
+#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */
+
+#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
+
#endif
diff --git a/include/asm-arm/arch-at91sam9/at91cap9.h b/include/asm-arm/arch-at91sam9/at91cap9.h
index d1b33a0..0b52228 100644
--- a/include/asm-arm/arch-at91sam9/at91cap9.h
+++ b/include/asm-arm/arch-at91sam9/at91cap9.h
@@ -101,13 +101,25 @@
#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR_REVB (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR_REVC (0xfffffd60 - AT91_BASE_SYS)
#define AT91_USART0 AT91CAP9_BASE_US0
#define AT91_USART1 AT91CAP9_BASE_US1
#define AT91_USART2 AT91CAP9_BASE_US2
/*
+ * SCKCR flags
+ */
+#define AT91CAP9_SCKCR_RCEN (1 << 0) /* RC Oscillator Enable */
+#define AT91CAP9_SCKCR_OSC32EN (1 << 1) /* 32kHz Oscillator Enable */
+#define AT91CAP9_SCKCR_OSC32BYP (1 << 2) /* 32kHz Oscillator Bypass */
+#define AT91CAP9_SCKCR_OSCSEL (1 << 3) /* Slow Clock Selector */
+#define AT91CAP9_SCKCR_OSCSEL_RC (0 << 3)
+#define AT91CAP9_SCKCR_OSCSEL_32 (1 << 3)
+
+/*
* Internal Memory.
*/
#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
diff --git a/include/asm-arm/arch-at91sam9/at91sam9261.h b/include/asm-arm/arch-at91sam9/at91sam9261.h
new file mode 100644
index 0000000..752d81d
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9261.h
@@ -0,0 +1,105 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9261.h]
+ *
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91SAM9261 datasheet revision E. (Preliminary)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_H
+#define AT91SAM9261_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91SAM9261_ID_US0 6 /* USART 0 */
+#define AT91SAM9261_ID_US1 7 /* USART 1 */
+#define AT91SAM9261_ID_US2 8 /* USART 2 */
+#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */
+#define AT91SAM9261_ID_UDP 10 /* USB Device Port */
+#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */
+#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */
+#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */
+#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */
+#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */
+#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */
+#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */
+#define AT91SAM9261_ID_UHP 20 /* USB Host port */
+#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */
+#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9261_BASE_TCB0 0xfffa0000
+#define AT91SAM9261_BASE_TC0 0xfffa0000
+#define AT91SAM9261_BASE_TC1 0xfffa0040
+#define AT91SAM9261_BASE_TC2 0xfffa0080
+#define AT91SAM9261_BASE_UDP 0xfffa4000
+#define AT91SAM9261_BASE_MCI 0xfffa8000
+#define AT91SAM9261_BASE_TWI 0xfffac000
+#define AT91SAM9261_BASE_US0 0xfffb0000
+#define AT91SAM9261_BASE_US1 0xfffb4000
+#define AT91SAM9261_BASE_US2 0xfffb8000
+#define AT91SAM9261_BASE_SSC0 0xfffbc000
+#define AT91SAM9261_BASE_SSC1 0xfffc0000
+#define AT91SAM9261_BASE_SSC2 0xfffc4000
+#define AT91SAM9261_BASE_SPI0 0xfffc8000
+#define AT91SAM9261_BASE_SPI1 0xfffcc000
+#define AT91_BASE_SYS 0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91SAM9261_BASE_US0
+#define AT91_USART1 AT91SAM9261_BASE_US1
+#define AT91_USART2 AT91SAM9261_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */
+
+#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */
+#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */
+
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91sam9261_matrix.h b/include/asm-arm/arch-at91sam9/at91sam9261_matrix.h
new file mode 100644
index 0000000..e2bfc4b
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9261_matrix.h
@@ -0,0 +1,64 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9261_matrix.h]
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_MATRIX_H
+#define AT91SAM9261_MATRIX_H
+
+#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+
+#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_ITCM_64 (7 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DTCM_64 (7 << 4)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+
+#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */
+#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91sam9263.h b/include/asm-arm/arch-at91sam9/at91sam9263.h
new file mode 100644
index 0000000..98251cb
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9263.h
@@ -0,0 +1,127 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9263.h]
+ *
+ * (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */
+#define AT91SAM9263_ID_US0 7 /* USART 0 */
+#define AT91SAM9263_ID_US1 8 /* USART 1 */
+#define AT91SAM9263_ID_US2 9 /* USART 2 */
+#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */
+#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */
+#define AT91SAM9263_ID_CAN 12 /* CAN */
+#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */
+#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */
+#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */
+#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */
+#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */
+#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */
+#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */
+#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */
+#define AT91SAM9263_ID_EMAC 21 /* Ethernet */
+#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */
+#define AT91SAM9263_ID_UDP 24 /* USB Device Port */
+#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */
+#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */
+#define AT91SAM9263_ID_DMA 27 /* DMA Controller */
+#define AT91SAM9263_ID_UHP 29 /* USB Host port */
+#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9263_BASE_UDP 0xfff78000
+#define AT91SAM9263_BASE_TCB0 0xfff7c000
+#define AT91SAM9263_BASE_TC0 0xfff7c000
+#define AT91SAM9263_BASE_TC1 0xfff7c040
+#define AT91SAM9263_BASE_TC2 0xfff7c080
+#define AT91SAM9263_BASE_MCI0 0xfff80000
+#define AT91SAM9263_BASE_MCI1 0xfff84000
+#define AT91SAM9263_BASE_TWI 0xfff88000
+#define AT91SAM9263_BASE_US0 0xfff8c000
+#define AT91SAM9263_BASE_US1 0xfff90000
+#define AT91SAM9263_BASE_US2 0xfff94000
+#define AT91SAM9263_BASE_SSC0 0xfff98000
+#define AT91SAM9263_BASE_SSC1 0xfff9c000
+#define AT91SAM9263_BASE_AC97C 0xfffa0000
+#define AT91SAM9263_BASE_SPI0 0xfffa4000
+#define AT91SAM9263_BASE_SPI1 0xfffa8000
+#define AT91SAM9263_BASE_CAN 0xfffac000
+#define AT91SAM9263_BASE_PWMC 0xfffb8000
+#define AT91SAM9263_BASE_EMAC 0xfffbc000
+#define AT91SAM9263_BASE_ISI 0xfffc4000
+#define AT91SAM9263_BASE_2DGE 0xfffc8000
+#define AT91_BASE_SYS 0xffffe000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS)
+#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS)
+#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS)
+#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS)
+#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS)
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91SAM9263_BASE_US0
+#define AT91_USART1 AT91SAM9263_BASE_US1
+#define AT91_USART2 AT91SAM9263_BASE_US2
+
+#define AT91_SMC AT91_SMC0
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */
+#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */
+
+#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
+
+#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */
+#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */
+#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
+#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
+
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91sam9263_matrix.h b/include/asm-arm/arch-at91sam9/at91sam9263_matrix.h
new file mode 100644
index 0000000..83aaaab
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9263_matrix.h
@@ -0,0 +1,129 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9263_matrix.h]
+ *
+ * Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+
+#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
+
+#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
+#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91sam9rl.h b/include/asm-arm/arch-at91sam9/at91sam9rl.h
new file mode 100644
index 0000000..215bbc8
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9rl.h
@@ -0,0 +1,115 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9rl.h]
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Common definitions.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_H
+#define AT91SAM9RL_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Controller */
+#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */
+#define AT91SAM9RL_ID_US0 6 /* USART 0 */
+#define AT91SAM9RL_ID_US1 7 /* USART 1 */
+#define AT91SAM9RL_ID_US2 8 /* USART 2 */
+#define AT91SAM9RL_ID_US3 9 /* USART 3 */
+#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */
+#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */
+#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */
+#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */
+#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */
+#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */
+#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */
+#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */
+#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */
+#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */
+#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */
+#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */
+#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */
+#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9RL_BASE_TCB0 0xfffa0000
+#define AT91SAM9RL_BASE_TC0 0xfffa0000
+#define AT91SAM9RL_BASE_TC1 0xfffa0040
+#define AT91SAM9RL_BASE_TC2 0xfffa0080
+#define AT91SAM9RL_BASE_MCI 0xfffa4000
+#define AT91SAM9RL_BASE_TWI0 0xfffa8000
+#define AT91SAM9RL_BASE_TWI1 0xfffac000
+#define AT91SAM9RL_BASE_US0 0xfffb0000
+#define AT91SAM9RL_BASE_US1 0xfffb4000
+#define AT91SAM9RL_BASE_US2 0xfffb8000
+#define AT91SAM9RL_BASE_US3 0xfffbc000
+#define AT91SAM9RL_BASE_SSC0 0xfffc0000
+#define AT91SAM9RL_BASE_SSC1 0xfffc4000
+#define AT91SAM9RL_BASE_PWMC 0xfffc8000
+#define AT91SAM9RL_BASE_SPI 0xfffcc000
+#define AT91SAM9RL_BASE_TSC 0xfffd0000
+#define AT91SAM9RL_BASE_UDPHS 0xfffd4000
+#define AT91SAM9RL_BASE_AC97C 0xfffd8000
+#define AT91_BASE_SYS 0xffffc000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
+#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91SAM9RL_BASE_US0
+#define AT91_USART1 AT91SAM9RL_BASE_US1
+#define AT91_USART2 AT91SAM9RL_BASE_US2
+#define AT91_USART3 AT91SAM9RL_BASE_US3
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
+
+#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
+
+#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
+#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/at91sam9rl_matrix.h b/include/asm-arm/arch-at91sam9/at91sam9rl_matrix.h
new file mode 100644
index 0000000..af8d914
--- /dev/null
+++ b/include/asm-arm/arch-at91sam9/at91sam9rl_matrix.h
@@ -0,0 +1,96 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9rl_matrix.h]
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_MATRIX_H
+#define AT91SAM9RL_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
+
+
+#endif
diff --git a/include/asm-arm/arch-at91sam9/clk.h b/include/asm-arm/arch-at91sam9/clk.h
index f67b435..1b502c8 100644
--- a/include/asm-arm/arch-at91sam9/clk.h
+++ b/include/asm-arm/arch-at91sam9/clk.h
@@ -36,4 +36,10 @@ static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
return AT91_MASTER_CLOCK;
}
+static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id)
+{
+ return AT91_MASTER_CLOCK;
+}
+
+
#endif /* __ASM_ARM_ARCH_CLK_H__ */
diff --git a/include/asm-arm/arch-at91sam9/hardware.h b/include/asm-arm/arch-at91sam9/hardware.h
index d2fe453..f312419 100644
--- a/include/asm-arm/arch-at91sam9/hardware.h
+++ b/include/asm-arm/arch-at91sam9/hardware.h
@@ -26,10 +26,19 @@
#define AT91_PMC_UHP AT91SAM926x_PMC_UHP
#elif defined(CONFIG_AT91SAM9261)
#include <asm/arch/at91sam9261.h>
+#define AT91_BASE_SPI AT91SAM9261_BASE_SPI0
+#define AT91_ID_UHP AT91SAM9261_ID_UHP
+#define AT91_PMC_UHP AT91SAM926x_PMC_UHP
#elif defined(CONFIG_AT91SAM9263)
#include <asm/arch/at91sam9263.h>
+#define AT91_BASE_EMAC AT91SAM9263_BASE_EMAC
+#define AT91_BASE_SPI AT91SAM9263_BASE_SPI0
+#define AT91_ID_UHP AT91SAM9263_ID_UHP
+#define AT91_PMC_UHP AT91SAM926x_PMC_UHP
#elif defined(CONFIG_AT91SAM9RL)
#include <asm/arch/at91sam9rl.h>
+#define AT91_BASE_SPI AT91SAM9RL_BASE_SPI
+#define AT91_ID_UHP AT91SAM9RL_ID_UHP
#elif defined(CONFIG_AT91CAP9)
#include <asm/arch/at91cap9.h>
#define AT91_BASE_EMAC AT91CAP9_BASE_EMAC
@@ -42,15 +51,4 @@
#error "Unsupported AT91 processor"
#endif
-/*
- * container_of - cast a member of a structure out to the containing structure
- *
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- */
-#define container_of(ptr, type, member) ({ \
- const typeof(((type *)0)->member) *__mptr = (ptr); \
- (type *)((char *)__mptr - offsetof(type, member)); })
-
#endif
diff --git a/include/asm-avr32/arch-at32ap700x/chip-features.h b/include/asm-avr32/arch-at32ap700x/chip-features.h
index 29b1fd6..c47107e 100644
--- a/include/asm-avr32/arch-at32ap700x/chip-features.h
+++ b/include/asm-avr32/arch-at32ap700x/chip-features.h
@@ -25,6 +25,7 @@
/* Currently, all the AP700x chips have these */
#define AT32AP700x_CHIP_HAS_USART
#define AT32AP700x_CHIP_HAS_MMCI
+#define AT32AP700x_CHIP_HAS_SPI
/* Only AP7000 has ethernet interface */
#ifdef CONFIG_AT32AP7000
diff --git a/include/asm-avr32/arch-at32ap700x/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h
index 385319a..a9d8431 100644
--- a/include/asm-avr32/arch-at32ap700x/clk.h
+++ b/include/asm-avr32/arch-at32ap700x/clk.h
@@ -58,7 +58,7 @@ static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
return get_pba_clk_rate();
}
#endif
-#ifdef AT32AP700x_CHIP_HAS_USART
+#ifdef AT32AP700x_CHIP_HAS_MACB
static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
{
return get_pbb_clk_rate();
@@ -74,6 +74,14 @@ static inline unsigned long get_mci_clk_rate(void)
return get_pbb_clk_rate();
}
#endif
+#ifdef AT32AP700x_CHIP_HAS_SPI
+static inline unsigned long get_spi_clk_rate(unsigned int dev_id)
+{
+ return get_pba_clk_rate();
+}
+#endif
+
+extern void clk_init(void);
/* Board code may need the SDRAM base clock as a compile-time constant */
#define SDRAMC_BUS_HZ (MAIN_CLK_RATE >> CFG_CLKDIV_HSB)
diff --git a/include/asm-avr32/arch-at32ap700x/gpio.h b/include/asm-avr32/arch-at32ap700x/gpio.h
index b10a3e4..ef20cea 100644
--- a/include/asm-avr32/arch-at32ap700x/gpio.h
+++ b/include/asm-avr32/arch-at32ap700x/gpio.h
@@ -216,5 +216,9 @@ void gpio_enable_macb1(void);
#ifdef AT32AP700x_CHIP_HAS_MMCI
void gpio_enable_mmci(void);
#endif
+#ifdef AT32AP700x_CHIP_HAS_SPI
+void gpio_enable_spi0(unsigned long cs_mask);
+void gpio_enable_spi1(unsigned long cs_mask);
+#endif
#endif /* __ASM_AVR32_ARCH_GPIO_H__ */
diff --git a/include/asm-avr32/arch-at32ap700x/hmatrix.h b/include/asm-avr32/arch-at32ap700x/hmatrix.h
new file mode 100644
index 0000000..d6b6263
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap700x/hmatrix.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_ARCH_HMATRIX_H__
+#define __ASM_AVR32_ARCH_HMATRIX_H__
+
+#include <asm/hmatrix-common.h>
+
+/* Bitfields in SFR4 (EBI) */
+#define HMATRIX_EBI_SDRAM_ENABLE_OFFSET 1
+#define HMATRIX_EBI_SDRAM_ENABLE_SIZE 1
+#define HMATRIX_EBI_NAND_ENABLE_OFFSET 3
+#define HMATRIX_EBI_NAND_ENABLE_SIZE 1
+#define HMATRIX_EBI_CF0_ENABLE_OFFSET 4
+#define HMATRIX_EBI_CF0_ENABLE_SIZE 1
+#define HMATRIX_EBI_CF1_ENABLE_OFFSET 5
+#define HMATRIX_EBI_CF1_ENABLE_SIZE 1
+#define HMATRIX_EBI_PULLUP_DISABLE_OFFSET 8
+#define HMATRIX_EBI_PULLUP_DISABLE_SIZE 1
+
+/* HSB masters */
+#define HMATRIX_MASTER_CPU_DCACHE 0
+#define HMATRIX_MASTER_CPU_ICACHE 1
+#define HMATRIX_MASTER_PDC 2
+#define HMATRIX_MASTER_ISI 3
+#define HMATRIX_MASTER_USBA 4
+#define HMATRIX_MASTER_LCDC 5
+#define HMATRIX_MASTER_MACB0 6
+#define HMATRIX_MASTER_MACB1 7
+#define HMATRIX_MASTER_DMACA_M0 8
+#define HMATRIX_MASTER_DMACA_M1 9
+
+/* HSB slaves */
+#define HMATRIX_SLAVE_SRAM0 0
+#define HMATRIX_SLAVE_SRAM1 1
+#define HMATRIX_SLAVE_PBA 2
+#define HMATRIX_SLAVE_PBB 3
+#define HMATRIX_SLAVE_EBI 4
+#define HMATRIX_SLAVE_USBA 5
+#define HMATRIX_SLAVE_LCDC 6
+#define HMATRIX_SLAVE_DMACA 7
+
+#endif /* __ASM_AVR32_ARCH_HMATRIX_H__ */
diff --git a/include/asm-avr32/arch-at32ap700x/hmatrix2.h b/include/asm-avr32/arch-at32ap700x/hmatrix2.h
deleted file mode 100644
index b0e787a..0000000
--- a/include/asm-avr32/arch-at32ap700x/hmatrix2.h
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Register definition for the High-speed Bus Matrix
- */
-#ifndef __ASM_AVR32_HMATRIX2_H__
-#define __ASM_AVR32_HMATRIX2_H__
-
-/* HMATRIX2 register offsets */
-#define HMATRIX2_MCFG0 0x0000
-#define HMATRIX2_MCFG1 0x0004
-#define HMATRIX2_MCFG2 0x0008
-#define HMATRIX2_MCFG3 0x000c
-#define HMATRIX2_MCFG4 0x0010
-#define HMATRIX2_MCFG5 0x0014
-#define HMATRIX2_MCFG6 0x0018
-#define HMATRIX2_MCFG7 0x001c
-#define HMATRIX2_MCFG8 0x0020
-#define HMATRIX2_MCFG9 0x0024
-#define HMATRIX2_MCFG10 0x0028
-#define HMATRIX2_MCFG11 0x002c
-#define HMATRIX2_MCFG12 0x0030
-#define HMATRIX2_MCFG13 0x0034
-#define HMATRIX2_MCFG14 0x0038
-#define HMATRIX2_MCFG15 0x003c
-#define HMATRIX2_SCFG0 0x0040
-#define HMATRIX2_SCFG1 0x0044
-#define HMATRIX2_SCFG2 0x0048
-#define HMATRIX2_SCFG3 0x004c
-#define HMATRIX2_SCFG4 0x0050
-#define HMATRIX2_SCFG5 0x0054
-#define HMATRIX2_SCFG6 0x0058
-#define HMATRIX2_SCFG7 0x005c
-#define HMATRIX2_SCFG8 0x0060
-#define HMATRIX2_SCFG9 0x0064
-#define HMATRIX2_SCFG10 0x0068
-#define HMATRIX2_SCFG11 0x006c
-#define HMATRIX2_SCFG12 0x0070
-#define HMATRIX2_SCFG13 0x0074
-#define HMATRIX2_SCFG14 0x0078
-#define HMATRIX2_SCFG15 0x007c
-#define HMATRIX2_PRAS0 0x0080
-#define HMATRIX2_PRBS0 0x0084
-#define HMATRIX2_PRAS1 0x0088
-#define HMATRIX2_PRBS1 0x008c
-#define HMATRIX2_PRAS2 0x0090
-#define HMATRIX2_PRBS2 0x0094
-#define HMATRIX2_PRAS3 0x0098
-#define HMATRIX2_PRBS3 0x009c
-#define HMATRIX2_PRAS4 0x00a0
-#define HMATRIX2_PRBS4 0x00a4
-#define HMATRIX2_PRAS5 0x00a8
-#define HMATRIX2_PRBS5 0x00ac
-#define HMATRIX2_PRAS6 0x00b0
-#define HMATRIX2_PRBS6 0x00b4
-#define HMATRIX2_PRAS7 0x00b8
-#define HMATRIX2_PRBS7 0x00bc
-#define HMATRIX2_PRAS8 0x00c0
-#define HMATRIX2_PRBS8 0x00c4
-#define HMATRIX2_PRAS9 0x00c8
-#define HMATRIX2_PRBS9 0x00cc
-#define HMATRIX2_PRAS10 0x00d0
-#define HMATRIX2_PRBS10 0x00d4
-#define HMATRIX2_PRAS11 0x00d8
-#define HMATRIX2_PRBS11 0x00dc
-#define HMATRIX2_PRAS12 0x00e0
-#define HMATRIX2_PRBS12 0x00e4
-#define HMATRIX2_PRAS13 0x00e8
-#define HMATRIX2_PRBS13 0x00ec
-#define HMATRIX2_PRAS14 0x00f0
-#define HMATRIX2_PRBS14 0x00f4
-#define HMATRIX2_PRAS15 0x00f8
-#define HMATRIX2_PRBS15 0x00fc
-#define HMATRIX2_MRCR 0x0100
-#define HMATRIX2_SFR0 0x0110
-#define HMATRIX2_SFR1 0x0114
-#define HMATRIX2_SFR2 0x0118
-#define HMATRIX2_SFR3 0x011c
-#define HMATRIX2_SFR4 0x0120
-#define HMATRIX2_SFR5 0x0124
-#define HMATRIX2_SFR6 0x0128
-#define HMATRIX2_SFR7 0x012c
-#define HMATRIX2_SFR8 0x0130
-#define HMATRIX2_SFR9 0x0134
-#define HMATRIX2_SFR10 0x0138
-#define HMATRIX2_SFR11 0x013c
-#define HMATRIX2_SFR12 0x0140
-#define HMATRIX2_SFR13 0x0144
-#define HMATRIX2_SFR14 0x0148
-#define HMATRIX2_SFR15 0x014c
-#define HMATRIX2_VERSION 0x01fc
-
-/* Bitfields in MCFG0 */
-#define HMATRIX2_ULBT_OFFSET 0
-#define HMATRIX2_ULBT_SIZE 3
-
-/* Bitfields in SCFG0 */
-#define HMATRIX2_SLOT_CYCLE_OFFSET 0
-#define HMATRIX2_SLOT_CYCLE_SIZE 8
-#define HMATRIX2_DEFMSTR_TYPE_OFFSET 16
-#define HMATRIX2_DEFMSTR_TYPE_SIZE 2
-#define HMATRIX2_FIXED_DEFMSTR_OFFSET 18
-#define HMATRIX2_FIXED_DEFMSTR_SIZE 4
-#define HMATRIX2_ARBT_OFFSET 24
-#define HMATRIX2_ARBT_SIZE 2
-
-/* Bitfields in PRAS0 */
-#define HMATRIX2_M0PR_OFFSET 0
-#define HMATRIX2_M0PR_SIZE 4
-#define HMATRIX2_M1PR_OFFSET 4
-#define HMATRIX2_M1PR_SIZE 4
-#define HMATRIX2_M2PR_OFFSET 8
-#define HMATRIX2_M2PR_SIZE 4
-#define HMATRIX2_M3PR_OFFSET 12
-#define HMATRIX2_M3PR_SIZE 4
-#define HMATRIX2_M4PR_OFFSET 16
-#define HMATRIX2_M4PR_SIZE 4
-#define HMATRIX2_M5PR_OFFSET 20
-#define HMATRIX2_M5PR_SIZE 4
-#define HMATRIX2_M6PR_OFFSET 24
-#define HMATRIX2_M6PR_SIZE 4
-#define HMATRIX2_M7PR_OFFSET 28
-#define HMATRIX2_M7PR_SIZE 4
-
-/* Bitfields in PRBS0 */
-#define HMATRIX2_M8PR_OFFSET 0
-#define HMATRIX2_M8PR_SIZE 4
-#define HMATRIX2_M9PR_OFFSET 4
-#define HMATRIX2_M9PR_SIZE 4
-#define HMATRIX2_M10PR_OFFSET 8
-#define HMATRIX2_M10PR_SIZE 4
-#define HMATRIX2_M11PR_OFFSET 12
-#define HMATRIX2_M11PR_SIZE 4
-#define HMATRIX2_M12PR_OFFSET 16
-#define HMATRIX2_M12PR_SIZE 4
-#define HMATRIX2_M13PR_OFFSET 20
-#define HMATRIX2_M13PR_SIZE 4
-#define HMATRIX2_M14PR_OFFSET 24
-#define HMATRIX2_M14PR_SIZE 4
-#define HMATRIX2_M15PR_OFFSET 28
-#define HMATRIX2_M15PR_SIZE 4
-
-/* Bitfields in MRCR */
-#define HMATRIX2_RBC0_OFFSET 0
-#define HMATRIX2_RBC0_SIZE 1
-#define HMATRIX2_RBC1_OFFSET 1
-#define HMATRIX2_RBC1_SIZE 1
-#define HMATRIX2_RBC2_OFFSET 2
-#define HMATRIX2_RBC2_SIZE 1
-#define HMATRIX2_RBC3_OFFSET 3
-#define HMATRIX2_RBC3_SIZE 1
-#define HMATRIX2_RBC4_OFFSET 4
-#define HMATRIX2_RBC4_SIZE 1
-#define HMATRIX2_RBC5_OFFSET 5
-#define HMATRIX2_RBC5_SIZE 1
-#define HMATRIX2_RBC6_OFFSET 6
-#define HMATRIX2_RBC6_SIZE 1
-#define HMATRIX2_RBC7_OFFSET 7
-#define HMATRIX2_RBC7_SIZE 1
-#define HMATRIX2_RBC8_OFFSET 8
-#define HMATRIX2_RBC8_SIZE 1
-#define HMATRIX2_RBC9_OFFSET 9
-#define HMATRIX2_RBC9_SIZE 1
-#define HMATRIX2_RBC10_OFFSET 10
-#define HMATRIX2_RBC10_SIZE 1
-#define HMATRIX2_RBC11_OFFSET 11
-#define HMATRIX2_RBC11_SIZE 1
-#define HMATRIX2_RBC12_OFFSET 12
-#define HMATRIX2_RBC12_SIZE 1
-#define HMATRIX2_RBC13_OFFSET 13
-#define HMATRIX2_RBC13_SIZE 1
-#define HMATRIX2_RBC14_OFFSET 14
-#define HMATRIX2_RBC14_SIZE 1
-#define HMATRIX2_RBC15_OFFSET 15
-#define HMATRIX2_RBC15_SIZE 1
-
-/* Bitfields in SFR0 */
-#define HMATRIX2_SFR_OFFSET 0
-#define HMATRIX2_SFR_SIZE 32
-
-/* Bitfields in SFR4 */
-#define HMATRIX2_CS1A_OFFSET 1
-#define HMATRIX2_CS1A_SIZE 1
-#define HMATRIX2_CS3A_OFFSET 3
-#define HMATRIX2_CS3A_SIZE 1
-#define HMATRIX2_CS4A_OFFSET 4
-#define HMATRIX2_CS4A_SIZE 1
-#define HMATRIX2_CS5A_OFFSET 5
-#define HMATRIX2_CS5A_SIZE 1
-#define HMATRIX2_DBPUC_OFFSET 8
-#define HMATRIX2_DBPUC_SIZE 1
-
-/* Bitfields in VERSION */
-#define HMATRIX2_VERSION_OFFSET 0
-#define HMATRIX2_VERSION_SIZE 12
-#define HMATRIX2_MFN_OFFSET 16
-#define HMATRIX2_MFN_SIZE 3
-
-/* Constants for ULBT */
-#define HMATRIX2_ULBT_INFINITE 0
-#define HMATRIX2_ULBT_SINGLE 1
-#define HMATRIX2_ULBT_FOUR_BEAT 2
-#define HMATRIX2_ULBT_SIXTEEN_BEAT 4
-
-/* Constants for DEFMSTR_TYPE */
-#define HMATRIX2_DEFMSTR_TYPE_NO_DEFAULT 0
-#define HMATRIX2_DEFMSTR_TYPE_LAST_DEFAULT 1
-#define HMATRIX2_DEFMSTR_TYPE_FIXED_DEFAULT 2
-
-/* Constants for ARBT */
-#define HMATRIX2_ARBT_ROUND_ROBIN 0
-#define HMATRIX2_ARBT_FIXED_PRIORITY 1
-
-/* Bit manipulation macros */
-#define HMATRIX2_BIT(name) \
- (1 << HMATRIX2_##name##_OFFSET)
-#define HMATRIX2_BF(name,value) \
- (((value) & ((1 << HMATRIX2_##name##_SIZE) - 1)) \
- << HMATRIX2_##name##_OFFSET)
-#define HMATRIX2_BFEXT(name,value) \
- (((value) >> HMATRIX2_##name##_OFFSET) \
- & ((1 << HMATRIX2_##name##_SIZE) - 1))
-#define HMATRIX2_BFINS(name,value,old) \
- (((old) & ~(((1 << HMATRIX2_##name##_SIZE) - 1) \
- << HMATRIX2_##name##_OFFSET)) \
- | HMATRIX2_BF(name,value))
-
-/* Register access macros */
-#define hmatrix2_readl(reg) \
- readl((void *)HMATRIX_BASE + HMATRIX2_##reg)
-#define hmatrix2_writel(reg,value) \
- writel((value), (void *)HMATRIX_BASE + HMATRIX2_##reg)
-
-#endif /* __ASM_AVR32_HMATRIX2_H__ */
diff --git a/include/asm-avr32/arch-at32ap700x/memory-map.h b/include/asm-avr32/arch-at32ap700x/memory-map.h
index 5513e88..6592c03 100644
--- a/include/asm-avr32/arch-at32ap700x/memory-map.h
+++ b/include/asm-avr32/arch-at32ap700x/memory-map.h
@@ -22,6 +22,26 @@
#ifndef __AT32AP7000_MEMORY_MAP_H__
#define __AT32AP7000_MEMORY_MAP_H__
+/* Internal and external memories */
+#define EBI_SRAM_CS0_BASE 0x00000000
+#define EBI_SRAM_CS0_SIZE 0x04000000
+#define EBI_SRAM_CS4_BASE 0x04000000
+#define EBI_SRAM_CS4_SIZE 0x04000000
+#define EBI_SRAM_CS2_BASE 0x08000000
+#define EBI_SRAM_CS2_SIZE 0x04000000
+#define EBI_SRAM_CS3_BASE 0x0c000000
+#define EBI_SRAM_CS3_SIZE 0x04000000
+#define EBI_SRAM_CS1_BASE 0x10000000
+#define EBI_SRAM_CS1_SIZE 0x10000000
+#define EBI_SRAM_CS5_BASE 0x20000000
+#define EBI_SRAM_CS5_SIZE 0x04000000
+
+#define EBI_SDRAM_BASE EBI_SRAM_CS1_BASE
+#define EBI_SDRAM_SIZE EBI_SRAM_CS1_SIZE
+
+#define INTERNAL_SRAM_BASE 0x24000000
+#define INTERNAL_SRAM_SIZE 0x00008000
+
/* Devices on the High Speed Bus (HSB) */
#define LCDC_BASE 0xFF000000
#define DMAC_BASE 0xFF200000
diff --git a/include/asm-avr32/hmatrix-common.h b/include/asm-avr32/hmatrix-common.h
new file mode 100644
index 0000000..4b7e610
--- /dev/null
+++ b/include/asm-avr32/hmatrix-common.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_AVR32_HMATRIX_COMMON_H__
+#define __ASM_AVR32_HMATRIX_COMMON_H__
+
+/* HMATRIX register offsets */
+struct hmatrix_regs {
+ u32 MCFG[16];
+ u32 SCFG[16];
+ struct {
+ u32 A;
+ u32 B;
+ } PRS[16];
+ u32 MRCR;
+ u32 __reserved[3];
+ u32 SFR[16];
+};
+
+/* Bitfields in MCFG */
+#define HMATRIX_ULBT_OFFSET 0
+#define HMATRIX_ULBT_SIZE 3
+
+/* Bitfields in SCFG */
+#define HMATRIX_SLOT_CYCLE_OFFSET 0
+#define HMATRIX_SLOT_CYCLE_SIZE 8
+#define HMATRIX_DEFMSTR_TYPE_OFFSET 16
+#define HMATRIX_DEFMSTR_TYPE_SIZE 2
+#define HMATRIX_FIXED_DEFMSTR_OFFSET 18
+#define HMATRIX_FIXED_DEFMSTR_SIZE 4
+#define HMATRIX_ARBT_OFFSET 24
+#define HMATRIX_ARBT_SIZE 1
+
+/* Bitfields in PRS.A */
+#define HMATRIX_M0PR_OFFSET 0
+#define HMATRIX_M0PR_SIZE 4
+#define HMATRIX_M1PR_OFFSET 4
+#define HMATRIX_M1PR_SIZE 4
+#define HMATRIX_M2PR_OFFSET 8
+#define HMATRIX_M2PR_SIZE 4
+#define HMATRIX_M3PR_OFFSET 12
+#define HMATRIX_M3PR_SIZE 4
+#define HMATRIX_M4PR_OFFSET 16
+#define HMATRIX_M4PR_SIZE 4
+#define HMATRIX_M5PR_OFFSET 20
+#define HMATRIX_M5PR_SIZE 4
+#define HMATRIX_M6PR_OFFSET 24
+#define HMATRIX_M6PR_SIZE 4
+#define HMATRIX_M7PR_OFFSET 28
+#define HMATRIX_M7PR_SIZE 4
+
+/* Bitfields in PRS.B */
+#define HMATRIX_M8PR_OFFSET 0
+#define HMATRIX_M8PR_SIZE 4
+#define HMATRIX_M9PR_OFFSET 4
+#define HMATRIX_M9PR_SIZE 4
+#define HMATRIX_M10PR_OFFSET 8
+#define HMATRIX_M10PR_SIZE 4
+#define HMATRIX_M11PR_OFFSET 12
+#define HMATRIX_M11PR_SIZE 4
+#define HMATRIX_M12PR_OFFSET 16
+#define HMATRIX_M12PR_SIZE 4
+#define HMATRIX_M13PR_OFFSET 20
+#define HMATRIX_M13PR_SIZE 4
+#define HMATRIX_M14PR_OFFSET 24
+#define HMATRIX_M14PR_SIZE 4
+#define HMATRIX_M15PR_OFFSET 28
+#define HMATRIX_M15PR_SIZE 4
+
+/* Constants for ULBT */
+#define HMATRIX_ULBT_INFINITE 0
+#define HMATRIX_ULBT_SINGLE 1
+#define HMATRIX_ULBT_FOUR_BEAT 2
+#define HMATRIX_ULBT_EIGHT_BEAT 3
+#define HMATRIX_ULBT_SIXTEEN_BEAT 4
+
+/* Constants for DEFMSTR_TYPE */
+#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT 0
+#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT 1
+#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT 2
+
+/* Constants for ARBT */
+#define HMATRIX_ARBT_ROUND_ROBIN 0
+#define HMATRIX_ARBT_FIXED_PRIORITY 1
+
+/* Bit manipulation macros */
+#define HMATRIX_BIT(name) \
+ (1 << HMATRIX_##name##_OFFSET)
+#define HMATRIX_BF(name,value) \
+ (((value) & ((1 << HMATRIX_##name##_SIZE) - 1)) \
+ << HMATRIX_##name##_OFFSET)
+#define HMATRIX_BFEXT(name,value) \
+ (((value) >> HMATRIX_##name##_OFFSET) \
+ & ((1 << HMATRIX_##name##_SIZE) - 1))
+#define HMATRIX_BFINS(name,value,old) \
+ (((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1) \
+ << HMATRIX_##name##_OFFSET)) \
+ | HMATRIX_BF(name,value))
+
+/* Register access macros */
+#define __hmatrix_reg(reg) \
+ (((volatile struct hmatrix_regs *)HMATRIX_BASE)->reg)
+#define hmatrix_read(reg) \
+ (__hmatrix_reg(reg))
+#define hmatrix_write(reg, value) \
+ do { __hmatrix_reg(reg) = (value); } while (0)
+
+#define hmatrix_slave_read(slave, reg) \
+ hmatrix_read(reg[HMATRIX_SLAVE_##slave])
+#define hmatrix_slave_write(slave, reg, value) \
+ hmatrix_write(reg[HMATRIX_SLAVE_##slave], value)
+
+#endif /* __ASM_AVR32_HMATRIX_COMMON_H__ */
diff --git a/include/asm-avr32/sdram.h b/include/asm-avr32/sdram.h
index 833af6e..7bdefc1 100644
--- a/include/asm-avr32/sdram.h
+++ b/include/asm-avr32/sdram.h
@@ -22,15 +22,32 @@
#ifndef __ASM_AVR32_SDRAM_H
#define __ASM_AVR32_SDRAM_H
-struct sdram_info {
- unsigned long phys_addr;
- unsigned int row_bits, col_bits, bank_bits;
- unsigned int cas, twr, trc, trp, trcd, tras, txsr;
+struct sdram_config {
+ /* Number of data bits. */
+ enum {
+ SDRAM_DATA_16BIT,
+ SDRAM_DATA_32BIT,
+ } data_bits;
+
+ /* Number of address bits */
+ uint8_t row_bits, col_bits, bank_bits;
+
+ /* SDRAM timings in cycles */
+ uint8_t cas, twr, trc, trp, trcd, tras, txsr;
/* SDRAM refresh period in cycles */
unsigned long refresh_period;
};
-extern unsigned long sdram_init(const struct sdram_info *info);
+/*
+ * Attempt to initialize the SDRAM controller using the specified
+ * parameters. Return the expected size of the memory area based on
+ * the number of address and data bits.
+ *
+ * The caller should verify that the configuration is correct by
+ * running a memory test, e.g. get_ram_size().
+ */
+extern unsigned long sdram_init(void *sdram_base,
+ const struct sdram_config *config);
#endif /* __ASM_AVR32_SDRAM_H */
diff --git a/include/asm-avr32/sections.h b/include/asm-avr32/sections.h
index 75373ab..fe819b2 100644
--- a/include/asm-avr32/sections.h
+++ b/include/asm-avr32/sections.h
@@ -25,15 +25,8 @@
/* References to section boundaries */
extern char _text[], _etext[];
-extern char __flashprog_start[], __flashprog_end[];
extern char _data[], __data_lma[], _edata[], __edata_lma[];
extern char __got_start[], __got_lma[], __got_end[];
extern char _end[];
-/*
- * Everything in .flashprog will be locked in the icache so it doesn't
- * get disturbed when executing flash commands.
- */
-#define __flashprog __attribute__((section(".flashprog"), __noinline__))
-
#endif /* __ASM_AVR32_SECTIONS_H */
diff --git a/include/asm-avr32/u-boot.h b/include/asm-avr32/u-boot.h
index 71dfcaf..85ef008 100644
--- a/include/asm-avr32/u-boot.h
+++ b/include/asm-avr32/u-boot.h
@@ -42,15 +42,4 @@ typedef struct bd_info {
#define bi_memstart bi_dram[0].start
#define bi_memsize bi_dram[0].size
-/**
- * container_of - cast a member of a structure out to the containing structure
- *
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- */
-#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
-
#endif /* __ASM_U_BOOT_H__ */
diff --git a/include/asm-mips/errno.h b/include/asm-mips/errno.h
new file mode 100644
index 0000000..1665a63
--- /dev/null
+++ b/include/asm-mips/errno.h
@@ -0,0 +1,143 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle
+ */
+#ifndef _ASM_MIPS_ERRNO_H
+#define _ASM_MIPS_ERRNO_H
+
+/*
+ * These first 34 error codes are from Linux 2.6, <asm-generic/errno-base.h>
+ */
+#define EPERM 1 /* Operation not permitted */
+#define ENOENT 2 /* No such file or directory */
+#define ESRCH 3 /* No such process */
+#define EINTR 4 /* Interrupted system call */
+#define EIO 5 /* I/O error */
+#define ENXIO 6 /* No such device or address */
+#define E2BIG 7 /* Argument list too long */
+#define ENOEXEC 8 /* Exec format error */
+#define EBADF 9 /* Bad file number */
+#define ECHILD 10 /* No child processes */
+#define EAGAIN 11 /* Try again */
+#define ENOMEM 12 /* Out of memory */
+#define EACCES 13 /* Permission denied */
+#define EFAULT 14 /* Bad address */
+#define ENOTBLK 15 /* Block device required */
+#define EBUSY 16 /* Device or resource busy */
+#define EEXIST 17 /* File exists */
+#define EXDEV 18 /* Cross-device link */
+#define ENODEV 19 /* No such device */
+#define ENOTDIR 20 /* Not a directory */
+#define EISDIR 21 /* Is a directory */
+#define EINVAL 22 /* Invalid argument */
+#define ENFILE 23 /* File table overflow */
+#define EMFILE 24 /* Too many open files */
+#define ENOTTY 25 /* Not a typewriter */
+#define ETXTBSY 26 /* Text file busy */
+#define EFBIG 27 /* File too large */
+#define ENOSPC 28 /* No space left on device */
+#define ESPIPE 29 /* Illegal seek */
+#define EROFS 30 /* Read-only file system */
+#define EMLINK 31 /* Too many links */
+#define EPIPE 32 /* Broken pipe */
+#define EDOM 33 /* Math argument out of domain of func */
+#define ERANGE 34 /* Math result not representable */
+
+/*
+ * These error numbers are intended to be MIPS ABI compatible
+ */
+#define ENOMSG 35 /* No message of desired type */
+#define EIDRM 36 /* Identifier removed */
+#define ECHRNG 37 /* Channel number out of range */
+#define EL2NSYNC 38 /* Level 2 not synchronized */
+#define EL3HLT 39 /* Level 3 halted */
+#define EL3RST 40 /* Level 3 reset */
+#define ELNRNG 41 /* Link number out of range */
+#define EUNATCH 42 /* Protocol driver not attached */
+#define ENOCSI 43 /* No CSI structure available */
+#define EL2HLT 44 /* Level 2 halted */
+#define EDEADLK 45 /* Resource deadlock would occur */
+#define ENOLCK 46 /* No record locks available */
+#define EBADE 50 /* Invalid exchange */
+#define EBADR 51 /* Invalid request descriptor */
+#define EXFULL 52 /* Exchange full */
+#define ENOANO 53 /* No anode */
+#define EBADRQC 54 /* Invalid request code */
+#define EBADSLT 55 /* Invalid slot */
+#define EDEADLOCK 56 /* File locking deadlock error */
+#define EBFONT 59 /* Bad font file format */
+#define ENOSTR 60 /* Device not a stream */
+#define ENODATA 61 /* No data available */
+#define ETIME 62 /* Timer expired */
+#define ENOSR 63 /* Out of streams resources */
+#define ENONET 64 /* Machine is not on the network */
+#define ENOPKG 65 /* Package not installed */
+#define EREMOTE 66 /* Object is remote */
+#define ENOLINK 67 /* Link has been severed */
+#define EADV 68 /* Advertise error */
+#define ESRMNT 69 /* Srmount error */
+#define ECOMM 70 /* Communication error on send */
+#define EPROTO 71 /* Protocol error */
+#define EDOTDOT 73 /* RFS specific error */
+#define EMULTIHOP 74 /* Multihop attempted */
+#define EBADMSG 77 /* Not a data message */
+#define ENAMETOOLONG 78 /* File name too long */
+#define EOVERFLOW 79 /* Value too large for defined data type */
+#define ENOTUNIQ 80 /* Name not unique on network */
+#define EBADFD 81 /* File descriptor in bad state */
+#define EREMCHG 82 /* Remote address changed */
+#define ELIBACC 83 /* Can not access a needed shared library */
+#define ELIBBAD 84 /* Accessing a corrupted shared library */
+#define ELIBSCN 85 /* .lib section in a.out corrupted */
+#define ELIBMAX 86 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 87 /* Cannot exec a shared library directly */
+#define EILSEQ 88 /* Illegal byte sequence */
+#define ENOSYS 89 /* Function not implemented */
+#define ELOOP 90 /* Too many symbolic links encountered */
+#define ERESTART 91 /* Interrupted system call should be restarted */
+#define ESTRPIPE 92 /* Streams pipe error */
+#define ENOTEMPTY 93 /* Directory not empty */
+#define EUSERS 94 /* Too many users */
+#define ENOTSOCK 95 /* Socket operation on non-socket */
+#define EDESTADDRREQ 96 /* Destination address required */
+#define EMSGSIZE 97 /* Message too long */
+#define EPROTOTYPE 98 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 99 /* Protocol not available */
+#define EPROTONOSUPPORT 120 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 121 /* Socket type not supported */
+#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 123 /* Protocol family not supported */
+#define EAFNOSUPPORT 124 /* Address family not supported by protocol */
+#define EADDRINUSE 125 /* Address already in use */
+#define EADDRNOTAVAIL 126 /* Cannot assign requested address */
+#define ENETDOWN 127 /* Network is down */
+#define ENETUNREACH 128 /* Network is unreachable */
+#define ENETRESET 129 /* Network dropped connection because of reset */
+#define ECONNABORTED 130 /* Software caused connection abort */
+#define ECONNRESET 131 /* Connection reset by peer */
+#define ENOBUFS 132 /* No buffer space available */
+#define EISCONN 133 /* Transport endpoint is already connected */
+#define ENOTCONN 134 /* Transport endpoint is not connected */
+#define EUCLEAN 135 /* Structure needs cleaning */
+#define ENOTNAM 137 /* Not a XENIX named type file */
+#define ENAVAIL 138 /* No XENIX semaphores available */
+#define EISNAM 139 /* Is a named type file */
+#define EREMOTEIO 140 /* Remote I/O error */
+#define EINIT 141 /* Reserved */
+#define EREMDEV 142 /* Error 142 */
+#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 144 /* Too many references: cannot splice */
+#define ETIMEDOUT 145 /* Connection timed out */
+#define ECONNREFUSED 146 /* Connection refused */
+#define EHOSTDOWN 147 /* Host is down */
+#define EHOSTUNREACH 148 /* No route to host */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define EALREADY 149 /* Operation already in progress */
+#define EINPROGRESS 150 /* Operation now in progress */
+#define ESTALE 151 /* Stale NFS file handle */
+#define ECANCELED 158 /* AIO operation canceled */
+
+#endif /* _ASM_MIPS_ERRNO_H */
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index 61a0dac..be7e5c6 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -7,8 +7,8 @@
* Copyright (C) 2000 Silicon Graphics, Inc.
* Modified for further R[236]000 support by Paul M. Antoine, 1996.
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ * Copyright (C) 2003, 2004 Maciej W. Rozycki
*/
#ifndef _ASM_MIPSREGS_H
#define _ASM_MIPSREGS_H
@@ -29,6 +29,15 @@
#endif
/*
+ * Configure language
+ */
+#ifdef __ASSEMBLY__
+#define _ULCAST_
+#else
+#define _ULCAST_ (unsigned long)
+#endif
+
+/*
* Coprocessor 0 register names
*/
#define CP0_INDEX $0
@@ -55,12 +64,15 @@
#define CP0_XCONTEXT $20
#define CP0_FRAMEMASK $21
#define CP0_DIAGNOSTIC $22
+#define CP0_DEBUG $23
+#define CP0_DEPC $24
#define CP0_PERFORMANCE $25
#define CP0_ECC $26
#define CP0_CACHEERR $27
#define CP0_TAGLO $28
#define CP0_TAGHI $29
#define CP0_ERROREPC $30
+#define CP0_DESAVE $31
/*
* R4640/R4650 cp0 register names. These registers are listed
@@ -82,11 +94,27 @@
#define CP0_S1_DERRADDR0 $26
#define CP0_S1_DERRADDR1 $27
#define CP0_S1_INTCONTROL $20
+
+/*
+ * Coprocessor 0 Set 2 register names
+ */
+#define CP0_S2_SRSCTL $12 /* MIPSR2 */
+
+/*
+ * Coprocessor 0 Set 3 register names
+ */
+#define CP0_S3_SRSMAP $12 /* MIPSR2 */
+
+/*
+ * TX39 Series
+ */
+#define CP0_TX39_CACHE $7
+
/*
* Coprocessor 1 (FPU) register names
*/
-#define CP1_REVISION $0
-#define CP1_STATUS $31
+#define CP1_REVISION $0
+#define CP1_STATUS $31
/*
* FPU Status Register Values
@@ -95,230 +123,113 @@
* Status Register Values
*/
-#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */
-#define FPU_CSR_COND 0x00800000 /* $fcc0 */
-#define FPU_CSR_COND0 0x00800000 /* $fcc0 */
-#define FPU_CSR_COND1 0x02000000 /* $fcc1 */
-#define FPU_CSR_COND2 0x04000000 /* $fcc2 */
-#define FPU_CSR_COND3 0x08000000 /* $fcc3 */
-#define FPU_CSR_COND4 0x10000000 /* $fcc4 */
-#define FPU_CSR_COND5 0x20000000 /* $fcc5 */
-#define FPU_CSR_COND6 0x40000000 /* $fcc6 */
-#define FPU_CSR_COND7 0x80000000 /* $fcc7 */
+#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */
+#define FPU_CSR_COND 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND0 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND1 0x02000000 /* $fcc1 */
+#define FPU_CSR_COND2 0x04000000 /* $fcc2 */
+#define FPU_CSR_COND3 0x08000000 /* $fcc3 */
+#define FPU_CSR_COND4 0x10000000 /* $fcc4 */
+#define FPU_CSR_COND5 0x20000000 /* $fcc5 */
+#define FPU_CSR_COND6 0x40000000 /* $fcc6 */
+#define FPU_CSR_COND7 0x80000000 /* $fcc7 */
/*
* X the exception cause indicator
* E the exception enable
* S the sticky/flag bit
-*/
-#define FPU_CSR_ALL_X 0x0003f000
-#define FPU_CSR_UNI_X 0x00020000
-#define FPU_CSR_INV_X 0x00010000
-#define FPU_CSR_DIV_X 0x00008000
-#define FPU_CSR_OVF_X 0x00004000
-#define FPU_CSR_UDF_X 0x00002000
-#define FPU_CSR_INE_X 0x00001000
-
-#define FPU_CSR_ALL_E 0x00000f80
-#define FPU_CSR_INV_E 0x00000800
-#define FPU_CSR_DIV_E 0x00000400
-#define FPU_CSR_OVF_E 0x00000200
-#define FPU_CSR_UDF_E 0x00000100
-#define FPU_CSR_INE_E 0x00000080
-
-#define FPU_CSR_ALL_S 0x0000007c
-#define FPU_CSR_INV_S 0x00000040
-#define FPU_CSR_DIV_S 0x00000020
-#define FPU_CSR_OVF_S 0x00000010
-#define FPU_CSR_UDF_S 0x00000008
-#define FPU_CSR_INE_S 0x00000004
+ */
+#define FPU_CSR_ALL_X 0x0003f000
+#define FPU_CSR_UNI_X 0x00020000
+#define FPU_CSR_INV_X 0x00010000
+#define FPU_CSR_DIV_X 0x00008000
+#define FPU_CSR_OVF_X 0x00004000
+#define FPU_CSR_UDF_X 0x00002000
+#define FPU_CSR_INE_X 0x00001000
-/* rounding mode */
-#define FPU_CSR_RN 0x0 /* nearest */
-#define FPU_CSR_RZ 0x1 /* towards zero */
-#define FPU_CSR_RU 0x2 /* towards +Infinity */
-#define FPU_CSR_RD 0x3 /* towards -Infinity */
+#define FPU_CSR_ALL_E 0x00000f80
+#define FPU_CSR_INV_E 0x00000800
+#define FPU_CSR_DIV_E 0x00000400
+#define FPU_CSR_OVF_E 0x00000200
+#define FPU_CSR_UDF_E 0x00000100
+#define FPU_CSR_INE_E 0x00000080
+#define FPU_CSR_ALL_S 0x0000007c
+#define FPU_CSR_INV_S 0x00000040
+#define FPU_CSR_DIV_S 0x00000020
+#define FPU_CSR_OVF_S 0x00000010
+#define FPU_CSR_UDF_S 0x00000008
+#define FPU_CSR_INE_S 0x00000004
+
+/* rounding mode */
+#define FPU_CSR_RN 0x0 /* nearest */
+#define FPU_CSR_RZ 0x1 /* towards zero */
+#define FPU_CSR_RU 0x2 /* towards +Infinity */
+#define FPU_CSR_RD 0x3 /* towards -Infinity */
/*
* Values for PageMask register
*/
-#include <linux/config.h>
#ifdef CONFIG_CPU_VR41XX
-#define PM_1K 0x00000000
-#define PM_4K 0x00001800
-#define PM_16K 0x00007800
-#define PM_64K 0x0001f800
-#define PM_256K 0x0007f800
-#else
-#define PM_4K 0x00000000
-#define PM_16K 0x00006000
-#define PM_64K 0x0001e000
-#define PM_256K 0x0007e000
-#define PM_1M 0x001fe000
-#define PM_4M 0x007fe000
-#define PM_16M 0x01ffe000
-#endif
-/*
- * Values used for computation of new tlb entries
- */
-#define PL_4K 12
-#define PL_16K 14
-#define PL_64K 16
-#define PL_256K 18
-#define PL_1M 20
-#define PL_4M 22
-#define PL_16M 24
+/* Why doesn't stupidity hurt ... */
-/*
- * Macros to access the system control coprocessor
- */
-#define read_32bit_cp0_register(source) \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tpush\n\t" \
- ".set\treorder\n\t" \
- "mfc0\t%0,"STR(source)"\n\t" \
- ".set\tpop" \
- : "=r" (__res)); \
- __res;})
+#define PM_1K 0x00000000
+#define PM_4K 0x00001800
+#define PM_16K 0x00007800
+#define PM_64K 0x0001f800
+#define PM_256K 0x0007f800
-#define read_32bit_cp0_set1_register(source) \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tpush\n\t" \
- ".set\treorder\n\t" \
- "cfc0\t%0,"STR(source)"\n\t" \
- ".set\tpop" \
- : "=r" (__res)); \
- __res;})
+#else
-/*
- * For now use this only with interrupts disabled!
- */
-#define read_64bit_cp0_register(source) \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tmips3\n\t" \
- "dmfc0\t%0,"STR(source)"\n\t" \
- ".set\tmips0" \
- : "=r" (__res)); \
- __res;})
+#define PM_4K 0x00000000
+#define PM_16K 0x00006000
+#define PM_64K 0x0001e000
+#define PM_256K 0x0007e000
+#define PM_1M 0x001fe000
+#define PM_4M 0x007fe000
+#define PM_16M 0x01ffe000
+#define PM_64M 0x07ffe000
+#define PM_256M 0x1fffe000
-#define write_32bit_cp0_register(register,value) \
- __asm__ __volatile__( \
- "mtc0\t%0,"STR(register)"\n\t" \
- "nop" \
- : : "r" (value));
-
-#define write_32bit_cp0_set1_register(register,value) \
- __asm__ __volatile__( \
- "ctc0\t%0,"STR(register)"\n\t" \
- "nop" \
- : : "r" (value));
-
-#define write_64bit_cp0_register(register,value) \
- __asm__ __volatile__( \
- ".set\tmips3\n\t" \
- "dmtc0\t%0,"STR(register)"\n\t" \
- ".set\tmips0" \
- : : "r" (value))
-
-/*
- * This should be changed when we get a compiler that support the MIPS32 ISA.
- */
-#define read_mips32_cp0_config1() \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tnoreorder\n\t" \
- ".set\tnoat\n\t" \
- ".word\t0x40018001\n\t" \
- "move\t%0,$1\n\t" \
- ".set\tat\n\t" \
- ".set\treorder" \
- :"=r" (__res)); \
- __res;})
+#endif
-#define tlb_write_indexed() \
- __asm__ __volatile__( \
- ".set noreorder\n\t" \
- "tlbwi\n\t" \
-".set reorder")
+/*
+ * Values used for computation of new tlb entries
+ */
+#define PL_4K 12
+#define PL_16K 14
+#define PL_64K 16
+#define PL_256K 18
+#define PL_1M 20
+#define PL_4M 22
+#define PL_16M 24
+#define PL_64M 26
+#define PL_256M 28
/*
* R4x00 interrupt enable / cause bits
*/
-#define IE_SW0 (1<< 8)
-#define IE_SW1 (1<< 9)
-#define IE_IRQ0 (1<<10)
-#define IE_IRQ1 (1<<11)
-#define IE_IRQ2 (1<<12)
-#define IE_IRQ3 (1<<13)
-#define IE_IRQ4 (1<<14)
-#define IE_IRQ5 (1<<15)
+#define IE_SW0 (_ULCAST_(1) << 8)
+#define IE_SW1 (_ULCAST_(1) << 9)
+#define IE_IRQ0 (_ULCAST_(1) << 10)
+#define IE_IRQ1 (_ULCAST_(1) << 11)
+#define IE_IRQ2 (_ULCAST_(1) << 12)
+#define IE_IRQ3 (_ULCAST_(1) << 13)
+#define IE_IRQ4 (_ULCAST_(1) << 14)
+#define IE_IRQ5 (_ULCAST_(1) << 15)
/*
* R4x00 interrupt cause bits
*/
-#define C_SW0 (1<< 8)
-#define C_SW1 (1<< 9)
-#define C_IRQ0 (1<<10)
-#define C_IRQ1 (1<<11)
-#define C_IRQ2 (1<<12)
-#define C_IRQ3 (1<<13)
-#define C_IRQ4 (1<<14)
-#define C_IRQ5 (1<<15)
-
-#ifndef _LANGUAGE_ASSEMBLY
-/*
- * Manipulate the status register.
- * Mostly used to access the interrupt bits.
- */
-#define __BUILD_SET_CP0(name,register) \
-extern __inline__ unsigned int \
-set_cp0_##name(unsigned int set) \
-{ \
- unsigned int res; \
- \
- res = read_32bit_cp0_register(register); \
- res |= set; \
- write_32bit_cp0_register(register, res); \
- \
- return res; \
-} \
- \
-extern __inline__ unsigned int \
-clear_cp0_##name(unsigned int clear) \
-{ \
- unsigned int res; \
- \
- res = read_32bit_cp0_register(register); \
- res &= ~clear; \
- write_32bit_cp0_register(register, res); \
- \
- return res; \
-} \
- \
-extern __inline__ unsigned int \
-change_cp0_##name(unsigned int change, unsigned int new) \
-{ \
- unsigned int res; \
- \
- res = read_32bit_cp0_register(register); \
- res &= ~change; \
- res |= (new & change); \
- if(change) \
- write_32bit_cp0_register(register, res); \
- \
- return res; \
-}
-
-__BUILD_SET_CP0(status,CP0_STATUS)
-__BUILD_SET_CP0(cause,CP0_CAUSE)
-__BUILD_SET_CP0(config,CP0_CONFIG)
-
-#endif /* defined (_LANGUAGE_ASSEMBLY) */
+#define C_SW0 (_ULCAST_(1) << 8)
+#define C_SW1 (_ULCAST_(1) << 9)
+#define C_IRQ0 (_ULCAST_(1) << 10)
+#define C_IRQ1 (_ULCAST_(1) << 11)
+#define C_IRQ2 (_ULCAST_(1) << 12)
+#define C_IRQ3 (_ULCAST_(1) << 13)
+#define C_IRQ4 (_ULCAST_(1) << 14)
+#define C_IRQ5 (_ULCAST_(1) << 15)
/*
* Bitfields in the R4xx0 cp0 status register
@@ -337,9 +248,16 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
#define ST0_CE 0x00020000
/*
+ * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate
+ * cacheops in userspace. This bit exists only on RM7000 and RM9000
+ * processors.
+ */
+#define ST0_CO 0x08000000
+
+/*
* Bitfields in the R[23]000 cp0 status register.
*/
-#define ST0_IEC 0x00000001
+#define ST0_IEC 0x00000001
#define ST0_KUC 0x00000002
#define ST0_IEP 0x00000004
#define ST0_KUP 0x00000008
@@ -353,9 +271,14 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
/*
* Bits specific to the R4640/R4650
*/
-#define ST0_UM (1 << 4)
-#define ST0_IL (1 << 23)
-#define ST0_DL (1 << 24)
+#define ST0_UM (_ULCAST_(1) << 4)
+#define ST0_IL (_ULCAST_(1) << 23)
+#define ST0_DL (_ULCAST_(1) << 24)
+
+/*
+ * Enable the MIPS MDMX and DSP ASEs
+ */
+#define ST0_MX 0x01000000
/*
* Bitfields in the TX39 family CP0 Configuration Register 3
@@ -395,39 +318,40 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
*/
#define ST0_IM 0x0000ff00
#define STATUSB_IP0 8
-#define STATUSF_IP0 (1 << 8)
+#define STATUSF_IP0 (_ULCAST_(1) << 8)
#define STATUSB_IP1 9
-#define STATUSF_IP1 (1 << 9)
+#define STATUSF_IP1 (_ULCAST_(1) << 9)
#define STATUSB_IP2 10
-#define STATUSF_IP2 (1 << 10)
+#define STATUSF_IP2 (_ULCAST_(1) << 10)
#define STATUSB_IP3 11
-#define STATUSF_IP3 (1 << 11)
+#define STATUSF_IP3 (_ULCAST_(1) << 11)
#define STATUSB_IP4 12
-#define STATUSF_IP4 (1 << 12)
+#define STATUSF_IP4 (_ULCAST_(1) << 12)
#define STATUSB_IP5 13
-#define STATUSF_IP5 (1 << 13)
+#define STATUSF_IP5 (_ULCAST_(1) << 13)
#define STATUSB_IP6 14
-#define STATUSF_IP6 (1 << 14)
+#define STATUSF_IP6 (_ULCAST_(1) << 14)
#define STATUSB_IP7 15
-#define STATUSF_IP7 (1 << 15)
+#define STATUSF_IP7 (_ULCAST_(1) << 15)
#define STATUSB_IP8 0
-#define STATUSF_IP8 (1 << 0)
+#define STATUSF_IP8 (_ULCAST_(1) << 0)
#define STATUSB_IP9 1
-#define STATUSF_IP9 (1 << 1)
+#define STATUSF_IP9 (_ULCAST_(1) << 1)
#define STATUSB_IP10 2
-#define STATUSF_IP10 (1 << 2)
+#define STATUSF_IP10 (_ULCAST_(1) << 2)
#define STATUSB_IP11 3
-#define STATUSF_IP11 (1 << 3)
+#define STATUSF_IP11 (_ULCAST_(1) << 3)
#define STATUSB_IP12 4
-#define STATUSF_IP12 (1 << 4)
+#define STATUSF_IP12 (_ULCAST_(1) << 4)
#define STATUSB_IP13 5
-#define STATUSF_IP13 (1 << 5)
+#define STATUSF_IP13 (_ULCAST_(1) << 5)
#define STATUSB_IP14 6
-#define STATUSF_IP14 (1 << 6)
+#define STATUSF_IP14 (_ULCAST_(1) << 6)
#define STATUSB_IP15 7
-#define STATUSF_IP15 (1 << 7)
+#define STATUSF_IP15 (_ULCAST_(1) << 7)
#define ST0_CH 0x00040000
#define ST0_SR 0x00100000
+#define ST0_TS 0x00200000
#define ST0_BEV 0x00400000
#define ST0_RE 0x02000000
#define ST0_FR 0x04000000
@@ -444,35 +368,36 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
* Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
*/
#define CAUSEB_EXCCODE 2
-#define CAUSEF_EXCCODE (31 << 2)
+#define CAUSEF_EXCCODE (_ULCAST_(31) << 2)
#define CAUSEB_IP 8
-#define CAUSEF_IP (255 << 8)
+#define CAUSEF_IP (_ULCAST_(255) << 8)
#define CAUSEB_IP0 8
-#define CAUSEF_IP0 (1 << 8)
+#define CAUSEF_IP0 (_ULCAST_(1) << 8)
#define CAUSEB_IP1 9
-#define CAUSEF_IP1 (1 << 9)
+#define CAUSEF_IP1 (_ULCAST_(1) << 9)
#define CAUSEB_IP2 10
-#define CAUSEF_IP2 (1 << 10)
+#define CAUSEF_IP2 (_ULCAST_(1) << 10)
#define CAUSEB_IP3 11
-#define CAUSEF_IP3 (1 << 11)
+#define CAUSEF_IP3 (_ULCAST_(1) << 11)
#define CAUSEB_IP4 12
-#define CAUSEF_IP4 (1 << 12)
+#define CAUSEF_IP4 (_ULCAST_(1) << 12)
#define CAUSEB_IP5 13
-#define CAUSEF_IP5 (1 << 13)
+#define CAUSEF_IP5 (_ULCAST_(1) << 13)
#define CAUSEB_IP6 14
-#define CAUSEF_IP6 (1 << 14)
+#define CAUSEF_IP6 (_ULCAST_(1) << 14)
#define CAUSEB_IP7 15
-#define CAUSEF_IP7 (1 << 15)
+#define CAUSEF_IP7 (_ULCAST_(1) << 15)
#define CAUSEB_IV 23
-#define CAUSEF_IV (1 << 23)
+#define CAUSEF_IV (_ULCAST_(1) << 23)
#define CAUSEB_CE 28
-#define CAUSEF_CE (3 << 28)
+#define CAUSEF_CE (_ULCAST_(3) << 28)
#define CAUSEB_BD 31
-#define CAUSEF_BD (1 << 31)
+#define CAUSEF_BD (_ULCAST_(1) << 31)
/*
- * Bits in the coprozessor 0 config register.
+ * Bits in the coprocessor 0 config register.
*/
+/* Generic bits. */
#define CONF_CM_CACHABLE_NO_WA 0
#define CONF_CM_CACHABLE_WA 1
#define CONF_CM_UNCACHED 2
@@ -482,66 +407,958 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
#define CONF_CM_CACHABLE_CUW 6
#define CONF_CM_CACHABLE_ACCELERATED 7
#define CONF_CM_CMASK 7
-#define CONF_DB (1 << 4)
-#define CONF_IB (1 << 5)
-#define CONF_SC (1 << 17)
-#define CONF_AC (1 << 23)
-#define CONF_HALT (1 << 25)
+#define CONF_BE (_ULCAST_(1) << 15)
+
+/* Bits common to various processors. */
+#define CONF_CU (_ULCAST_(1) << 3)
+#define CONF_DB (_ULCAST_(1) << 4)
+#define CONF_IB (_ULCAST_(1) << 5)
+#define CONF_DC (_ULCAST_(7) << 6)
+#define CONF_IC (_ULCAST_(7) << 9)
+#define CONF_EB (_ULCAST_(1) << 13)
+#define CONF_EM (_ULCAST_(1) << 14)
+#define CONF_SM (_ULCAST_(1) << 16)
+#define CONF_SC (_ULCAST_(1) << 17)
+#define CONF_EW (_ULCAST_(3) << 18)
+#define CONF_EP (_ULCAST_(15)<< 24)
+#define CONF_EC (_ULCAST_(7) << 28)
+#define CONF_CM (_ULCAST_(1) << 31)
+
+/* Bits specific to the R4xx0. */
+#define R4K_CONF_SW (_ULCAST_(1) << 20)
+#define R4K_CONF_SS (_ULCAST_(1) << 21)
+#define R4K_CONF_SB (_ULCAST_(3) << 22)
+
+/* Bits specific to the R5000. */
+#define R5K_CONF_SE (_ULCAST_(1) << 12)
+#define R5K_CONF_SS (_ULCAST_(3) << 20)
+
+/* Bits specific to the RM7000. */
+#define RM7K_CONF_SE (_ULCAST_(1) << 3)
+#define RM7K_CONF_TE (_ULCAST_(1) << 12)
+#define RM7K_CONF_CLK (_ULCAST_(1) << 16)
+#define RM7K_CONF_TC (_ULCAST_(1) << 17)
+#define RM7K_CONF_SI (_ULCAST_(3) << 20)
+#define RM7K_CONF_SC (_ULCAST_(1) << 31)
+
+/* Bits specific to the R10000. */
+#define R10K_CONF_DN (_ULCAST_(3) << 3)
+#define R10K_CONF_CT (_ULCAST_(1) << 5)
+#define R10K_CONF_PE (_ULCAST_(1) << 6)
+#define R10K_CONF_PM (_ULCAST_(3) << 7)
+#define R10K_CONF_EC (_ULCAST_(15)<< 9)
+#define R10K_CONF_SB (_ULCAST_(1) << 13)
+#define R10K_CONF_SK (_ULCAST_(1) << 14)
+#define R10K_CONF_SS (_ULCAST_(7) << 16)
+#define R10K_CONF_SC (_ULCAST_(7) << 19)
+#define R10K_CONF_DC (_ULCAST_(7) << 26)
+#define R10K_CONF_IC (_ULCAST_(7) << 29)
+
+/* Bits specific to the VR41xx. */
+#define VR41_CONF_CS (_ULCAST_(1) << 12)
+#define VR41_CONF_P4K (_ULCAST_(1) << 13)
+#define VR41_CONF_BP (_ULCAST_(1) << 16)
+#define VR41_CONF_M16 (_ULCAST_(1) << 20)
+#define VR41_CONF_AD (_ULCAST_(1) << 23)
+
+/* Bits specific to the R30xx. */
+#define R30XX_CONF_FDM (_ULCAST_(1) << 19)
+#define R30XX_CONF_REV (_ULCAST_(1) << 22)
+#define R30XX_CONF_AC (_ULCAST_(1) << 23)
+#define R30XX_CONF_RF (_ULCAST_(1) << 24)
+#define R30XX_CONF_HALT (_ULCAST_(1) << 25)
+#define R30XX_CONF_FPINT (_ULCAST_(7) << 26)
+#define R30XX_CONF_DBR (_ULCAST_(1) << 29)
+#define R30XX_CONF_SB (_ULCAST_(1) << 30)
+#define R30XX_CONF_LOCK (_ULCAST_(1) << 31)
+
+/* Bits specific to the TX49. */
+#define TX49_CONF_DC (_ULCAST_(1) << 16)
+#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */
+#define TX49_CONF_HALT (_ULCAST_(1) << 18)
+#define TX49_CONF_CWFON (_ULCAST_(1) << 27)
+
+/* Bits specific to the MIPS32/64 PRA. */
+#define MIPS_CONF_MT (_ULCAST_(7) << 7)
+#define MIPS_CONF_AR (_ULCAST_(7) << 10)
+#define MIPS_CONF_AT (_ULCAST_(3) << 13)
+#define MIPS_CONF_M (_ULCAST_(1) << 31)
+
+/*
+ * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above.
+ */
+#define MIPS_CONF1_FP (_ULCAST_(1) << 0)
+#define MIPS_CONF1_EP (_ULCAST_(1) << 1)
+#define MIPS_CONF1_CA (_ULCAST_(1) << 2)
+#define MIPS_CONF1_WR (_ULCAST_(1) << 3)
+#define MIPS_CONF1_PC (_ULCAST_(1) << 4)
+#define MIPS_CONF1_MD (_ULCAST_(1) << 5)
+#define MIPS_CONF1_C2 (_ULCAST_(1) << 6)
+#define MIPS_CONF1_DA (_ULCAST_(7) << 7)
+#define MIPS_CONF1_DL (_ULCAST_(7) << 10)
+#define MIPS_CONF1_DS (_ULCAST_(7) << 13)
+#define MIPS_CONF1_IA (_ULCAST_(7) << 16)
+#define MIPS_CONF1_IL (_ULCAST_(7) << 19)
+#define MIPS_CONF1_IS (_ULCAST_(7) << 22)
+#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25)
+
+#define MIPS_CONF2_SA (_ULCAST_(15)<< 0)
+#define MIPS_CONF2_SL (_ULCAST_(15)<< 4)
+#define MIPS_CONF2_SS (_ULCAST_(15)<< 8)
+#define MIPS_CONF2_SU (_ULCAST_(15)<< 12)
+#define MIPS_CONF2_TA (_ULCAST_(15)<< 16)
+#define MIPS_CONF2_TL (_ULCAST_(15)<< 20)
+#define MIPS_CONF2_TS (_ULCAST_(15)<< 24)
+#define MIPS_CONF2_TU (_ULCAST_(7) << 28)
+
+#define MIPS_CONF3_TL (_ULCAST_(1) << 0)
+#define MIPS_CONF3_SM (_ULCAST_(1) << 1)
+#define MIPS_CONF3_MT (_ULCAST_(1) << 2)
+#define MIPS_CONF3_SP (_ULCAST_(1) << 4)
+#define MIPS_CONF3_VINT (_ULCAST_(1) << 5)
+#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6)
+#define MIPS_CONF3_LPA (_ULCAST_(1) << 7)
+#define MIPS_CONF3_DSP (_ULCAST_(1) << 10)
+#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13)
+
+#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
+
+#define MIPS_CONF7_RPS (_ULCAST_(1) << 2)
+
+/*
+ * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
+ */
+#define MIPS_FPIR_S (_ULCAST_(1) << 16)
+#define MIPS_FPIR_D (_ULCAST_(1) << 17)
+#define MIPS_FPIR_PS (_ULCAST_(1) << 18)
+#define MIPS_FPIR_3D (_ULCAST_(1) << 19)
+#define MIPS_FPIR_W (_ULCAST_(1) << 20)
+#define MIPS_FPIR_L (_ULCAST_(1) << 21)
+#define MIPS_FPIR_F64 (_ULCAST_(1) << 22)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Functions to access the R10000 performance counters. These are basically
+ * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit
+ * performance counter number encoded into bits 1 ... 5 of the instruction.
+ * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware
+ * disassembler these will look like an access to sel 0 or 1.
+ */
+#define read_r10k_perf_cntr(counter) \
+({ \
+ unsigned int __res; \
+ __asm__ __volatile__( \
+ "mfpc\t%0, %1" \
+ : "=r" (__res) \
+ : "i" (counter)); \
+ \
+ __res; \
+})
+
+#define write_r10k_perf_cntr(counter,val) \
+do { \
+ __asm__ __volatile__( \
+ "mtpc\t%0, %1" \
+ : \
+ : "r" (val), "i" (counter)); \
+} while (0)
+
+#define read_r10k_perf_event(counter) \
+({ \
+ unsigned int __res; \
+ __asm__ __volatile__( \
+ "mfps\t%0, %1" \
+ : "=r" (__res) \
+ : "i" (counter)); \
+ \
+ __res; \
+})
+
+#define write_r10k_perf_cntl(counter,val) \
+do { \
+ __asm__ __volatile__( \
+ "mtps\t%0, %1" \
+ : \
+ : "r" (val), "i" (counter)); \
+} while (0)
+
+/*
+ * Macros to access the system control coprocessor
+ */
+
+#define __read_32bit_c0_register(source, sel) \
+({ int __res; \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ "mfc0\t%0, " #source "\n\t" \
+ : "=r" (__res)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "mfc0\t%0, " #source ", " #sel "\n\t" \
+ ".set\tmips0\n\t" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __read_64bit_c0_register(source, sel) \
+({ unsigned long long __res; \
+ if (sizeof(unsigned long) == 4) \
+ __res = __read_64bit_c0_split(source, sel); \
+ else if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmfc0\t%0, " #source "\n\t" \
+ ".set\tmips0" \
+ : "=r" (__res)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%0, " #source ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __write_32bit_c0_register(register, sel, value) \
+do { \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ "mtc0\t%z0, " #register "\n\t" \
+ : : "Jr" ((unsigned int)(value))); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "mtc0\t%z0, " #register ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" ((unsigned int)(value))); \
+} while (0)
+
+#define __write_64bit_c0_register(register, sel, value) \
+do { \
+ if (sizeof(unsigned long) == 4) \
+ __write_64bit_c0_split(register, sel, value); \
+ else if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmtc0\t%z0, " #register "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" (value)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmtc0\t%z0, " #register ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" (value)); \
+} while (0)
+
+#define __read_ulong_c0_register(reg, sel) \
+ ((sizeof(unsigned long) == 4) ? \
+ (unsigned long) __read_32bit_c0_register(reg, sel) : \
+ (unsigned long) __read_64bit_c0_register(reg, sel))
+
+#define __write_ulong_c0_register(reg, sel, val) \
+do { \
+ if (sizeof(unsigned long) == 4) \
+ __write_32bit_c0_register(reg, sel, val); \
+ else \
+ __write_64bit_c0_register(reg, sel, val); \
+} while (0)
+
+/*
+ * On RM7000/RM9000 these are uses to access cop0 set 1 registers
+ */
+#define __read_32bit_c0_ctrl_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ "cfc0\t%0, " #source "\n\t" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __write_32bit_c0_ctrl_register(register, value) \
+do { \
+ __asm__ __volatile__( \
+ "ctc0\t%z0, " #register "\n\t" \
+ : : "Jr" ((unsigned int)(value))); \
+} while (0)
+
+/*
+ * These versions are only needed for systems with more than 38 bits of
+ * physical address space running the 32-bit kernel. That's none atm :-)
+ */
+#define __read_64bit_c0_split(source, sel) \
+({ \
+ unsigned long long __val; \
+ unsigned long __flags; \
+ \
+ local_irq_save(__flags); \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%M0, " #source "\n\t" \
+ "dsll\t%L0, %M0, 32\n\t" \
+ "dsrl\t%M0, %M0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ ".set\tmips0" \
+ : "=r" (__val)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%M0, " #source ", " #sel "\n\t" \
+ "dsll\t%L0, %M0, 32\n\t" \
+ "dsrl\t%M0, %M0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ ".set\tmips0" \
+ : "=r" (__val)); \
+ local_irq_restore(__flags); \
+ \
+ __val; \
+})
+
+#define __write_64bit_c0_split(source, sel, val) \
+do { \
+ unsigned long __flags; \
+ \
+ local_irq_save(__flags); \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dsll\t%L0, %L0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ "dsll\t%M0, %M0, 32\n\t" \
+ "or\t%L0, %L0, %M0\n\t" \
+ "dmtc0\t%L0, " #source "\n\t" \
+ ".set\tmips0" \
+ : : "r" (val)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dsll\t%L0, %L0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ "dsll\t%M0, %M0, 32\n\t" \
+ "or\t%L0, %L0, %M0\n\t" \
+ "dmtc0\t%L0, " #source ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "r" (val)); \
+ local_irq_restore(__flags); \
+} while (0)
+
+#define read_c0_index() __read_32bit_c0_register($0, 0)
+#define write_c0_index(val) __write_32bit_c0_register($0, 0, val)
+
+#define read_c0_entrylo0() __read_ulong_c0_register($2, 0)
+#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val)
+
+#define read_c0_entrylo1() __read_ulong_c0_register($3, 0)
+#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val)
+
+#define read_c0_conf() __read_32bit_c0_register($3, 0)
+#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val)
+
+#define read_c0_context() __read_ulong_c0_register($4, 0)
+#define write_c0_context(val) __write_ulong_c0_register($4, 0, val)
+
+#define read_c0_userlocal() __read_ulong_c0_register($4, 2)
+#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val)
+
+#define read_c0_pagemask() __read_32bit_c0_register($5, 0)
+#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val)
+
+#define read_c0_wired() __read_32bit_c0_register($6, 0)
+#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val)
+
+#define read_c0_info() __read_32bit_c0_register($7, 0)
+
+#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */
+#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_badvaddr() __read_ulong_c0_register($8, 0)
+#define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val)
+
+#define read_c0_count() __read_32bit_c0_register($9, 0)
+#define write_c0_count(val) __write_32bit_c0_register($9, 0, val)
+
+#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */
+#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val)
+
+#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */
+#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val)
+
+#define read_c0_entryhi() __read_ulong_c0_register($10, 0)
+#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val)
+
+#define read_c0_compare() __read_32bit_c0_register($11, 0)
+#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val)
+
+#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */
+#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val)
+
+#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */
+#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val)
+
+#define read_c0_status() __read_32bit_c0_register($12, 0)
+#ifdef CONFIG_MIPS_MT_SMTC
+#define write_c0_status(val) \
+do { \
+ __write_32bit_c0_register($12, 0, val); \
+ __ehb(); \
+} while (0)
+#else
+/*
+ * Legacy non-SMTC code, which may be hazardous
+ * but which might not support EHB
+ */
+#define write_c0_status(val) __write_32bit_c0_register($12, 0, val)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+#define read_c0_cause() __read_32bit_c0_register($13, 0)
+#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val)
+
+#define read_c0_epc() __read_ulong_c0_register($14, 0)
+#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val)
+
+#define read_c0_prid() __read_32bit_c0_register($15, 0)
+
+#define read_c0_config() __read_32bit_c0_register($16, 0)
+#define read_c0_config1() __read_32bit_c0_register($16, 1)
+#define read_c0_config2() __read_32bit_c0_register($16, 2)
+#define read_c0_config3() __read_32bit_c0_register($16, 3)
+#define read_c0_config4() __read_32bit_c0_register($16, 4)
+#define read_c0_config5() __read_32bit_c0_register($16, 5)
+#define read_c0_config6() __read_32bit_c0_register($16, 6)
+#define read_c0_config7() __read_32bit_c0_register($16, 7)
+#define write_c0_config(val) __write_32bit_c0_register($16, 0, val)
+#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val)
+#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val)
+#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val)
+#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val)
+#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val)
+#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val)
+#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val)
+
+/*
+ * The WatchLo register. There may be upto 8 of them.
+ */
+#define read_c0_watchlo0() __read_ulong_c0_register($18, 0)
+#define read_c0_watchlo1() __read_ulong_c0_register($18, 1)
+#define read_c0_watchlo2() __read_ulong_c0_register($18, 2)
+#define read_c0_watchlo3() __read_ulong_c0_register($18, 3)
+#define read_c0_watchlo4() __read_ulong_c0_register($18, 4)
+#define read_c0_watchlo5() __read_ulong_c0_register($18, 5)
+#define read_c0_watchlo6() __read_ulong_c0_register($18, 6)
+#define read_c0_watchlo7() __read_ulong_c0_register($18, 7)
+#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val)
+#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val)
+#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val)
+#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val)
+#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val)
+#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val)
+#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val)
+#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val)
+
+/*
+ * The WatchHi register. There may be upto 8 of them.
+ */
+#define read_c0_watchhi0() __read_32bit_c0_register($19, 0)
+#define read_c0_watchhi1() __read_32bit_c0_register($19, 1)
+#define read_c0_watchhi2() __read_32bit_c0_register($19, 2)
+#define read_c0_watchhi3() __read_32bit_c0_register($19, 3)
+#define read_c0_watchhi4() __read_32bit_c0_register($19, 4)
+#define read_c0_watchhi5() __read_32bit_c0_register($19, 5)
+#define read_c0_watchhi6() __read_32bit_c0_register($19, 6)
+#define read_c0_watchhi7() __read_32bit_c0_register($19, 7)
+
+#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val)
+#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val)
+#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val)
+#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val)
+#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val)
+#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val)
+#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val)
+#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val)
+
+#define read_c0_xcontext() __read_ulong_c0_register($20, 0)
+#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val)
+
+#define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20)
+#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val)
+
+#define read_c0_framemask() __read_32bit_c0_register($21, 0)
+#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val)
+
+/* RM9000 PerfControl performance counter control register */
+#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0)
+#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag() __read_32bit_c0_register($22, 0)
+#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag1() __read_32bit_c0_register($22, 1)
+#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val)
+
+#define read_c0_diag2() __read_32bit_c0_register($22, 2)
+#define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val)
+
+#define read_c0_diag3() __read_32bit_c0_register($22, 3)
+#define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val)
+
+#define read_c0_diag4() __read_32bit_c0_register($22, 4)
+#define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val)
+
+#define read_c0_diag5() __read_32bit_c0_register($22, 5)
+#define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val)
+
+#define read_c0_debug() __read_32bit_c0_register($23, 0)
+#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val)
+
+#define read_c0_depc() __read_ulong_c0_register($24, 0)
+#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val)
+
+/*
+ * MIPS32 / MIPS64 performance counters
+ */
+#define read_c0_perfctrl0() __read_32bit_c0_register($25, 0)
+#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val)
+#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1)
+#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val)
+#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2)
+#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val)
+#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3)
+#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val)
+#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4)
+#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val)
+#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5)
+#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val)
+#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6)
+#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val)
+#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7)
+#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val)
+
+/* RM9000 PerfCount performance counter register */
+#define read_c0_perfcount() __read_64bit_c0_register($25, 0)
+#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val)
+
+#define read_c0_ecc() __read_32bit_c0_register($26, 0)
+#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val)
+
+#define read_c0_derraddr0() __read_ulong_c0_register($26, 1)
+#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val)
+
+#define read_c0_cacheerr() __read_32bit_c0_register($27, 0)
+
+#define read_c0_derraddr1() __read_ulong_c0_register($27, 1)
+#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val)
+
+#define read_c0_taglo() __read_32bit_c0_register($28, 0)
+#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val)
+
+#define read_c0_dtaglo() __read_32bit_c0_register($28, 2)
+#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val)
+
+#define read_c0_taghi() __read_32bit_c0_register($29, 0)
+#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val)
+
+#define read_c0_errorepc() __read_ulong_c0_register($30, 0)
+#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val)
+
+/* MIPSR2 */
+#define read_c0_hwrena() __read_32bit_c0_register($7, 0)
+#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_intctl() __read_32bit_c0_register($12, 1)
+#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val)
+
+#define read_c0_srsctl() __read_32bit_c0_register($12, 2)
+#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val)
+
+#define read_c0_srsmap() __read_32bit_c0_register($12, 3)
+#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val)
+
+#define read_c0_ebase() __read_32bit_c0_register($15, 1)
+#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val)
/*
- * R10000 performance counter definitions.
+ * Macros to access the floating point coprocessor control registers
+ */
+#define read_32bit_cp1_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ ".set\tpush\n\t" \
+ ".set\treorder\n\t" \
+ "cfc1\t%0,"STR(source)"\n\t" \
+ ".set\tpop" \
+ : "=r" (__res)); \
+ __res;})
+
+#define rddsp(mask) \
+({ \
+ unsigned int __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # rddsp $1, %x1 \n" \
+ " .word 0x7c000cb8 | (%x1 << 16) \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__res) \
+ : "i" (mask)); \
+ __res; \
+})
+
+#define wrdsp(val, mask) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # wrdsp $1, %x1 \n" \
+ " .word 0x7c2004f8 | (%x1 << 11) \n" \
+ " .set pop \n" \
+ : \
+ : "r" (val), "i" (mask)); \
+} while (0)
+
+#define mfhi0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac0 \n" \
+ " .word 0x00000810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac1 \n" \
+ " .word 0x00200810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac2 \n" \
+ " .word 0x00400810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac3 \n" \
+ " .word 0x00600810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac0 \n" \
+ " .word 0x00000812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac1 \n" \
+ " .word 0x00200812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac2 \n" \
+ " .word 0x00400812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac3 \n" \
+ " .word 0x00600812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mthi0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac0 \n" \
+ " .word 0x00200011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac1 \n" \
+ " .word 0x00200811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac2 \n" \
+ " .word 0x00201011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac3 \n" \
+ " .word 0x00201811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac0 \n" \
+ " .word 0x00200013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac1 \n" \
+ " .word 0x00200813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac2 \n" \
+ " .word 0x00201013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac3 \n" \
+ " .word 0x00201813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+/*
+ * TLB operations.
*
- * FIXME: The R10000 performance counter opens a nice way to implement CPU
- * time accounting with a precission of one cycle. I don't have
- * R10000 silicon but just a manual, so ...
- */
-
-/*
- * Events counted by counter #0
- */
-#define CE0_CYCLES 0
-#define CE0_INSN_ISSUED 1
-#define CE0_LPSC_ISSUED 2
-#define CE0_S_ISSUED 3
-#define CE0_SC_ISSUED 4
-#define CE0_SC_FAILED 5
-#define CE0_BRANCH_DECODED 6
-#define CE0_QW_WB_SECONDARY 7
-#define CE0_CORRECTED_ECC_ERRORS 8
-#define CE0_ICACHE_MISSES 9
-#define CE0_SCACHE_I_MISSES 10
-#define CE0_SCACHE_I_WAY_MISSPREDICTED 11
-#define CE0_EXT_INTERVENTIONS_REQ 12
-#define CE0_EXT_INVALIDATE_REQ 13
-#define CE0_VIRTUAL_COHERENCY_COND 14
-#define CE0_INSN_GRADUATED 15
-
-/*
- * Events counted by counter #1
- */
-#define CE1_CYCLES 0
-#define CE1_INSN_GRADUATED 1
-#define CE1_LPSC_GRADUATED 2
-#define CE1_S_GRADUATED 3
-#define CE1_SC_GRADUATED 4
-#define CE1_FP_INSN_GRADUATED 5
-#define CE1_QW_WB_PRIMARY 6
-#define CE1_TLB_REFILL 7
-#define CE1_BRANCH_MISSPREDICTED 8
-#define CE1_DCACHE_MISS 9
-#define CE1_SCACHE_D_MISSES 10
-#define CE1_SCACHE_D_WAY_MISSPREDICTED 11
-#define CE1_EXT_INTERVENTION_HITS 12
-#define CE1_EXT_INVALIDATE_REQ 13
-#define CE1_SP_HINT_TO_CEXCL_SC_BLOCKS 14
-#define CE1_SP_HINT_TO_SHARED_SC_BLOCKS 15
-
-/*
- * These flags define in which priviledge mode the counters count events
- */
-#define CEB_USER 8 /* Count events in user mode, EXL = ERL = 0 */
-#define CEB_SUPERVISOR 4 /* Count events in supvervisor mode EXL = ERL = 0 */
-#define CEB_KERNEL 2 /* Count events in kernel mode EXL = ERL = 0 */
-#define CEB_EXL 1 /* Count events with EXL = 1, ERL = 0 */
+ * It is responsibility of the caller to take care of any TLB hazards.
+ */
+static inline void tlb_probe(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbp\n\t"
+ ".set reorder");
+}
+
+static inline void tlb_read(void)
+{
+#if MIPS34K_MISSED_ITLB_WAR
+ int res = 0;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41610001 # dvpe $1 \n"
+ " move %0, $1 \n"
+ " ehb \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+#endif
+
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbr\n\t"
+ ".set reorder");
+
+#if MIPS34K_MISSED_ITLB_WAR
+ if ((res & _ULCAST_(1)))
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41600021 # evpe \n"
+ " ehb \n"
+ " .set pop \n");
+#endif
+}
+
+static inline void tlb_write_indexed(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbwi\n\t"
+ ".set reorder");
+}
+
+static inline void tlb_write_random(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbwr\n\t"
+ ".set reorder");
+}
+
+/*
+ * Manipulate bits in a c0 register.
+ */
+#define __BUILD_SET_C0(name) \
+static inline unsigned int \
+set_c0_##name(unsigned int set) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res |= set; \
+ write_c0_##name(res); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+clear_c0_##name(unsigned int clear) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res &= ~clear; \
+ write_c0_##name(res); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+change_c0_##name(unsigned int change, unsigned int new) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res &= ~change; \
+ res |= (new & change); \
+ write_c0_##name(res); \
+ \
+ return res; \
+}
+
+__BUILD_SET_C0(status)
+__BUILD_SET_C0(cause)
+__BUILD_SET_C0(config)
+__BUILD_SET_C0(intcontrol)
+__BUILD_SET_C0(intctl)
+__BUILD_SET_C0(srsmap)
+
+#endif /* !__ASSEMBLY__ */
#endif /* _ASM_MIPSREGS_H */
diff --git a/include/asm-ppc/bitops.h b/include/asm-ppc/bitops.h
index 3264915..4e9c608 100644
--- a/include/asm-ppc/bitops.h
+++ b/include/asm-ppc/bitops.h
@@ -287,7 +287,7 @@ extern __inline__ int ext2_test_bit(int nr, __const__ void * addr)
#define ext2_find_first_zero_bit(addr, size) \
ext2_find_next_zero_bit((addr), (size), 0)
-extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr,
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr,
unsigned long size, unsigned long offset)
{
unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index 4f78ca7..050a7b6 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -140,11 +140,16 @@ extern void _tlbia(void); /* invalidate all TLB entries */
typedef enum {
IBAT0 = 0, IBAT1, IBAT2, IBAT3,
- DBAT0, DBAT1, DBAT2, DBAT3
+ DBAT0, DBAT1, DBAT2, DBAT3,
+#ifdef CONFIG_HIGH_BATS
+ IBAT4, IBAT5, IBAT6, IBAT7,
+ DBAT4, DBAT5, DBAT6, DBAT7
+#endif
} ppc_bat_t;
extern int read_bat(ppc_bat_t bat, unsigned long *upper, unsigned long *lower);
extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
+extern void print_bats(void);
#endif /* __ASSEMBLY__ */
diff --git a/include/atmel_lcdc.h b/include/atmel_lcdc.h
new file mode 100644
index 0000000..73dd8f7
--- /dev/null
+++ b/include/atmel_lcdc.h
@@ -0,0 +1,177 @@
+/*
+ * Header file for AT91/AT32 LCD Controller
+ *
+ * Data structure and register user interface
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ATMEL_LCDC_H__
+#define __ATMEL_LCDC_H__
+
+#define ATMEL_LCDC_DMABADDR1 0x00
+#define ATMEL_LCDC_DMABADDR2 0x04
+#define ATMEL_LCDC_DMAFRMPT1 0x08
+#define ATMEL_LCDC_DMAFRMPT2 0x0c
+#define ATMEL_LCDC_DMAFRMADD1 0x10
+#define ATMEL_LCDC_DMAFRMADD2 0x14
+
+#define ATMEL_LCDC_DMAFRMCFG 0x18
+#define ATMEL_LCDC_FRSIZE (0x7fffff << 0)
+#define ATMEL_LCDC_BLENGTH_OFFSET 24
+#define ATMEL_LCDC_BLENGTH (0x7f << ATMEL_LCDC_BLENGTH_OFFSET)
+
+#define ATMEL_LCDC_DMACON 0x1c
+#define ATMEL_LCDC_DMAEN (0x1 << 0)
+#define ATMEL_LCDC_DMARST (0x1 << 1)
+#define ATMEL_LCDC_DMABUSY (0x1 << 2)
+#define ATMEL_LCDC_DMAUPDT (0x1 << 3)
+#define ATMEL_LCDC_DMA2DEN (0x1 << 4)
+
+#define ATMEL_LCDC_DMA2DCFG 0x20
+#define ATMEL_LCDC_ADDRINC_OFFSET 0
+#define ATMEL_LCDC_ADDRINC (0xffff)
+#define ATMEL_LCDC_PIXELOFF_OFFSET 24
+#define ATMEL_LCDC_PIXELOFF (0x1f << 24)
+
+#define ATMEL_LCDC_LCDCON1 0x0800
+#define ATMEL_LCDC_BYPASS (1 << 0)
+#define ATMEL_LCDC_CLKVAL_OFFSET 12
+#define ATMEL_LCDC_CLKVAL (0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
+#define ATMEL_LCDC_LINCNT (0x7ff << 21)
+
+#define ATMEL_LCDC_LCDCON2 0x0804
+#define ATMEL_LCDC_DISTYPE (3 << 0)
+#define ATMEL_LCDC_DISTYPE_STNMONO (0 << 0)
+#define ATMEL_LCDC_DISTYPE_STNCOLOR (1 << 0)
+#define ATMEL_LCDC_DISTYPE_TFT (2 << 0)
+#define ATMEL_LCDC_SCANMOD (1 << 2)
+#define ATMEL_LCDC_SCANMOD_SINGLE (0 << 2)
+#define ATMEL_LCDC_SCANMOD_DUAL (1 << 2)
+#define ATMEL_LCDC_IFWIDTH (3 << 3)
+#define ATMEL_LCDC_IFWIDTH_4 (0 << 3)
+#define ATMEL_LCDC_IFWIDTH_8 (1 << 3)
+#define ATMEL_LCDC_IFWIDTH_16 (2 << 3)
+#define ATMEL_LCDC_PIXELSIZE (7 << 5)
+#define ATMEL_LCDC_PIXELSIZE_1 (0 << 5)
+#define ATMEL_LCDC_PIXELSIZE_2 (1 << 5)
+#define ATMEL_LCDC_PIXELSIZE_4 (2 << 5)
+#define ATMEL_LCDC_PIXELSIZE_8 (3 << 5)
+#define ATMEL_LCDC_PIXELSIZE_16 (4 << 5)
+#define ATMEL_LCDC_PIXELSIZE_24 (5 << 5)
+#define ATMEL_LCDC_PIXELSIZE_32 (6 << 5)
+#define ATMEL_LCDC_INVVD (1 << 8)
+#define ATMEL_LCDC_INVVD_NORMAL (0 << 8)
+#define ATMEL_LCDC_INVVD_INVERTED (1 << 8)
+#define ATMEL_LCDC_INVFRAME (1 << 9 )
+#define ATMEL_LCDC_INVFRAME_NORMAL (0 << 9)
+#define ATMEL_LCDC_INVFRAME_INVERTED (1 << 9)
+#define ATMEL_LCDC_INVLINE (1 << 10)
+#define ATMEL_LCDC_INVLINE_NORMAL (0 << 10)
+#define ATMEL_LCDC_INVLINE_INVERTED (1 << 10)
+#define ATMEL_LCDC_INVCLK (1 << 11)
+#define ATMEL_LCDC_INVCLK_NORMAL (0 << 11)
+#define ATMEL_LCDC_INVCLK_INVERTED (1 << 11)
+#define ATMEL_LCDC_INVDVAL (1 << 12)
+#define ATMEL_LCDC_INVDVAL_NORMAL (0 << 12)
+#define ATMEL_LCDC_INVDVAL_INVERTED (1 << 12)
+#define ATMEL_LCDC_CLKMOD (1 << 15)
+#define ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
+#define ATMEL_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
+#define ATMEL_LCDC_MEMOR (1 << 31)
+#define ATMEL_LCDC_MEMOR_BIG (0 << 31)
+#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
+
+#define ATMEL_LCDC_TIM1 0x0808
+#define ATMEL_LCDC_VFP (0xffU << 0)
+#define ATMEL_LCDC_VBP_OFFSET 8
+#define ATMEL_LCDC_VBP (0xffU << ATMEL_LCDC_VBP_OFFSET)
+#define ATMEL_LCDC_VPW_OFFSET 16
+#define ATMEL_LCDC_VPW (0x3fU << ATMEL_LCDC_VPW_OFFSET)
+#define ATMEL_LCDC_VHDLY_OFFSET 24
+#define ATMEL_LCDC_VHDLY (0xfU << ATMEL_LCDC_VHDLY_OFFSET)
+
+#define ATMEL_LCDC_TIM2 0x080c
+#define ATMEL_LCDC_HBP (0xffU << 0)
+#define ATMEL_LCDC_HPW_OFFSET 8
+#define ATMEL_LCDC_HPW (0x3fU << ATMEL_LCDC_HPW_OFFSET)
+#define ATMEL_LCDC_HFP_OFFSET 21
+#define ATMEL_LCDC_HFP (0x7ffU << ATMEL_LCDC_HFP_OFFSET)
+
+#define ATMEL_LCDC_LCDFRMCFG 0x0810
+#define ATMEL_LCDC_LINEVAL (0x7ff << 0)
+#define ATMEL_LCDC_HOZVAL_OFFSET 21
+#define ATMEL_LCDC_HOZVAL (0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
+
+#define ATMEL_LCDC_FIFO 0x0814
+#define ATMEL_LCDC_FIFOTH (0xffff)
+
+#define ATMEL_LCDC_MVAL 0x0818
+
+#define ATMEL_LCDC_DP1_2 0x081c
+#define ATMEL_LCDC_DP4_7 0x0820
+#define ATMEL_LCDC_DP3_5 0x0824
+#define ATMEL_LCDC_DP2_3 0x0828
+#define ATMEL_LCDC_DP5_7 0x082c
+#define ATMEL_LCDC_DP3_4 0x0830
+#define ATMEL_LCDC_DP4_5 0x0834
+#define ATMEL_LCDC_DP6_7 0x0838
+#define ATMEL_LCDC_DP1_2_VAL (0xff)
+#define ATMEL_LCDC_DP4_7_VAL (0xfffffff)
+#define ATMEL_LCDC_DP3_5_VAL (0xfffff)
+#define ATMEL_LCDC_DP2_3_VAL (0xfff)
+#define ATMEL_LCDC_DP5_7_VAL (0xfffffff)
+#define ATMEL_LCDC_DP3_4_VAL (0xffff)
+#define ATMEL_LCDC_DP4_5_VAL (0xfffff)
+#define ATMEL_LCDC_DP6_7_VAL (0xfffffff)
+
+#define ATMEL_LCDC_PWRCON 0x083c
+#define ATMEL_LCDC_PWR (1 << 0)
+#define ATMEL_LCDC_GUARDT_OFFSET 1
+#define ATMEL_LCDC_GUARDT (0x7f << ATMEL_LCDC_GUARDT_OFFSET)
+#define ATMEL_LCDC_BUSY (1 << 31)
+
+#define ATMEL_LCDC_CONTRAST_CTR 0x0840
+#define ATMEL_LCDC_PS (3 << 0)
+#define ATMEL_LCDC_PS_DIV1 (0 << 0)
+#define ATMEL_LCDC_PS_DIV2 (1 << 0)
+#define ATMEL_LCDC_PS_DIV4 (2 << 0)
+#define ATMEL_LCDC_PS_DIV8 (3 << 0)
+#define ATMEL_LCDC_POL (1 << 2)
+#define ATMEL_LCDC_POL_NEGATIVE (0 << 2)
+#define ATMEL_LCDC_POL_POSITIVE (1 << 2)
+#define ATMEL_LCDC_ENA (1 << 3)
+#define ATMEL_LCDC_ENA_PWMDISABLE (0 << 3)
+#define ATMEL_LCDC_ENA_PWMENABLE (1 << 3)
+
+#define ATMEL_LCDC_CONTRAST_VAL 0x0844
+#define ATMEL_LCDC_CVAL (0xff)
+
+#define ATMEL_LCDC_IER 0x0848
+#define ATMEL_LCDC_IDR 0x084c
+#define ATMEL_LCDC_IMR 0x0850
+#define ATMEL_LCDC_ISR 0x0854
+#define ATMEL_LCDC_ICR 0x0858
+#define ATMEL_LCDC_LNI (1 << 0)
+#define ATMEL_LCDC_LSTLNI (1 << 1)
+#define ATMEL_LCDC_EOFI (1 << 2)
+#define ATMEL_LCDC_UFLWI (1 << 4)
+#define ATMEL_LCDC_OWRI (1 << 5)
+#define ATMEL_LCDC_MERI (1 << 6)
+
+#define ATMEL_LCDC_LUT(n) (0x0c00 + ((n)*4))
+
+#endif /* __ATMEL_LCDC_H__ */
diff --git a/include/common.h b/include/common.h
index d0f5704..26e1b46 100644
--- a/include/common.h
+++ b/include/common.h
@@ -176,6 +176,17 @@ typedef void (interrupt_handler_t)(void *);
(__x > __y) ? __x : __y; })
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr: the pointer to the member.
+ * @type: the type of the container struct this is embedded in.
+ * @member: the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({ \
+ const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+ (type *)( (char *)__mptr - offsetof(type,member) );})
+
/*
* Function Prototypes
*/
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 3f2f614..38b962f 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -31,6 +31,8 @@
#define CONFIG_MPC8220 1
#define CONFIG_ALASKA8220 1 /* ... on Alaska board */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
determine the CPU speed. */
#define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 706c13e..b7574bf 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -61,6 +61,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index 48e29a2..89edbde 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -61,6 +61,8 @@
#undef CONFIG_ECC /* enable ECC support */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* which initialization functions to call for this board */
#define CONFIG_MISC_INIT_R
#define CONFIG_BOARD_PRE_INIT
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index f85cff7..3a347ea 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -37,6 +37,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 610151f..d547681 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -469,6 +469,8 @@
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR @ 0x00000000 */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index e0a887c..7a5d0aa 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -453,6 +453,7 @@
/*
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 32f57ac..977c041 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -468,6 +468,7 @@
/*
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 1276a12..9ca2a2b 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -483,6 +483,8 @@
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 119e7ac..bd77540 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -626,6 +626,7 @@
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR @ 0x00000000 */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index c72de03..38410a1 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -555,6 +555,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CFG_HID0_FINAL CFG_HID0_INIT
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 983575e..fcfbe6f 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -515,6 +515,8 @@
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 7b7d6f5..adedcb9 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -419,6 +419,8 @@
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR: cache cacheable */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index e92493a..4e159a0 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -502,6 +502,7 @@
/*
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/* DDR: cache cacheable */
#define CFG_SDRAM_LOWER CFG_SDRAM_BASE
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index f7e6fd2..29c2490 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -524,6 +524,8 @@
* MMU Setup
*/
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR: cache cacheable */
#define CFG_SDRAM_LOWER CFG_SDRAM_BASE
#define CFG_SDRAM_UPPER (CFG_SDRAM_BASE + 0x10000000)
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 15ff0ea..a051b6d 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -55,6 +55,7 @@
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported & enabled */
#define CONFIG_ALTIVEC 1
/*
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 9acc3da..49ee7ff 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -67,6 +67,7 @@
#define BANK_INTERLEAVING 0x22000000
#define SUPER_BANK_INTERLEAVING 0x23000000
+#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */
#define CONFIG_ALTIVEC 1
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index 6eb6444..259178f 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -40,6 +40,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 6cb3022..d21783b 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -42,6 +42,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 71fa36b..4c44735 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -50,6 +50,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index bff2edf..bfb478a 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -47,6 +47,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index a86939e..89fc465 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -423,6 +423,8 @@ extern int tqm834x_num_flash_banks;
#define CFG_HID0_FINAL CFG_HID0_INIT
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR 0 - 512M */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 31f10dd..598fe7b 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -48,6 +48,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
index 00c4ff0..1b4195a 100644
--- a/include/configs/Yukon8220.h
+++ b/include/configs/Yukon8220.h
@@ -31,6 +31,8 @@
#define CONFIG_MPC8220 1
#define CONFIG_YUKON8220 1 /* ... on Yukon board */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
determine the CPU speed. */
#define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index c975a24..4226529 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -372,6 +372,8 @@
#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Internal Definitions
*
diff --git a/include/configs/aev.h b/include/configs/aev.h
index e3f810c..c5e4759 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -41,6 +41,8 @@
#define CONFIG_AEVFIFO 1
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index c891fa8..342ce2a 100644
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -28,6 +28,7 @@
#define __CONFIG_H
/* ARM asynchronous clock */
+#define AT91_CPU_NAME "AT91CAP9"
#define AT91_MAIN_CLOCK 200000000 /* from 12 MHz crystal */
#define AT91_MASTER_CLOCK 100000000 /* peripheral = main / 2 */
#define CFG_HZ 1000000 /* 1us resolution */
@@ -55,11 +56,19 @@
#undef CONFIG_USART2
#define CONFIG_USART3 1 /* USART 3 is DBGU */
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock1 rw rootfstype=jffs2"
+/* LCD */
+#define CONFIG_LCD 1
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_LCD_LOGO 1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO 1
+#define CONFIG_LCD_INFO_BELOW_LOGO 1
+#define CFG_WHITE_ON_BLACK 1
+#define CONFIG_ATMEL_LCD 1
+#define CONFIG_ATMEL_LCD_BGR555 1
+#define CFG_CONSOLE_IS_IN_ENV 1
-/* #define CONFIG_ENV_OVERWRITE 1 */
+#define CONFIG_BOOTDELAY 3
/*
* BOOTP options
@@ -94,9 +103,9 @@
#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
#define CFG_MAX_DATAFLASH_BANKS 1
#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define AT91_SPI_CLK 20000000
-#define DATAFLASH_TCSS (0xFA << 16)
-#define DATAFLASH_TCHS (0x8 << 24)
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
/* NOR flash */
#define CFG_FLASH_CFI 1
@@ -110,6 +119,7 @@
#define NAND_MAX_CHIPS 1
#define CFG_MAX_NAND_DEVICE 1
#define CFG_NAND_BASE 0x40000000
+#define CFG_NAND_DBW_8 1
/* Ethernet */
#define CONFIG_MACB 1
@@ -143,7 +153,12 @@
#define CFG_ENV_OFFSET 0x4200
#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
#define CFG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC003DE00 0x72000000 0x200040; bootm"
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x72000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock1 " \
+ "mtdparts=physmap-flash.0:-(nor);" \
+ "at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
#else
@@ -154,6 +169,12 @@
#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_ENV_OFFSET)
#define CFG_ENV_SIZE 0x4000
#define CONFIG_BOOTCOMMAND "cp.b 0x10040000 0x72000000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock4 " \
+ "mtdparts=physmap-flash.0:16k(bootstrap)ro,"\
+ "16k(env),224k(uboot)ro,-(linux);" \
+ "at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
#endif
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 41c418f..675224e 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -56,10 +56,6 @@
#define CONFIG_USART3 1 /* USART 3 is DBGU */
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock0 rw rootfstype=jffs2"
-
-/* #define CONFIG_ENV_OVERWRITE 1 */
/*
* BOOTP options
@@ -96,7 +92,7 @@
#define CFG_MAX_DATAFLASH_BANKS 2
#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
#define CFG_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
-#define AT91_SPI_CLK 33000000
+#define AT91_SPI_CLK 15000000
#define DATAFLASH_TCSS (0x1a << 16)
#define DATAFLASH_TCHS (0x1 << 24)
@@ -104,6 +100,7 @@
#define NAND_MAX_CHIPS 1
#define CFG_MAX_NAND_DEVICE 1
#define CFG_NAND_BASE 0x40000000
+#define CFG_NAND_DBW_8 1
/* NOR flash - no real flash on this board */
#define CFG_NO_FLASH 1
@@ -142,7 +139,11 @@
#define CFG_ENV_OFFSET 0x4200
#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
#define CFG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC003DE00 0x22000000 0x200040; bootm"
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
#elif CFG_USE_DATAFLASH_CS1
@@ -152,7 +153,11 @@
#define CFG_ENV_OFFSET 0x4200
#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS1 + CFG_ENV_OFFSET)
#define CFG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xD003DE00 0x22000000 0x200040; bootm"
+#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
#else /* CFG_USE_NANDFLASH */
@@ -162,6 +167,12 @@
#define CFG_ENV_OFFSET_REDUND 0x80000
#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock5 " \
+ "mtdparts=at91_nand:128k(bootstrap)ro," \
+ "256k(uboot)ro,128k(env1)ro," \
+ "128k(env2)ro,2M(linux),-(root) " \
+ "rw rootfstype=jffs2"
#endif
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
new file mode 100644
index 0000000..e53a23f
--- /dev/null
+++ b/include/configs/at91sam9261ek.h
@@ -0,0 +1,202 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the AT91SAM9261EK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME "AT91SAM9261"
+#define AT91_MAIN_CLOCK 198656000 /* from 18.432 MHz crystal */
+#define AT91_MASTER_CLOCK 99328000 /* peripheral = main / 2 */
+#define CFG_HZ 1000000 /* 1us resolution */
+
+#define AT91_SLOW_CLOCK 32768 /* slow clock */
+
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/
+#define CONFIG_AT91SAM9261EK 1 /* on an AT91SAM9261EK Board */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART 1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD 1
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_LCD_LOGO 1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO 1
+#define CONFIG_LCD_INFO_BELOW_LOGO 1
+#define CFG_WHITE_ON_BLACK 1
+#define CONFIG_ATMEL_LCD 1
+#define CONFIG_ATMEL_LCD_BGR555 1
+#define CFG_CONSOLE_IS_IN_ENV 1
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE 1
+#define CONFIG_BOOTP_BOOTPATH 1
+#define CONFIG_BOOTP_GATEWAY 1
+#define CONFIG_BOOTP_HOSTNAME 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_DHCP 1
+#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_USB 1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH 1
+#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
+#define CFG_MAX_DATAFLASH_BANKS 2
+#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
+
+/* NAND flash */
+#define NAND_MAX_CHIPS 1
+#define CFG_MAX_NAND_DEVICE 1
+#define CFG_NAND_BASE 0x40000000
+#define CFG_NAND_DBW_8 1
+
+/* NOR flash - no real flash on this board */
+#define CFG_NO_FLASH 1
+
+/* Ethernet */
+#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_DM9000_BASE 0x30000000
+#define DM9000_IO CONFIG_DM9000_BASE
+#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
+#define CONFIG_DM9000_USE_16BIT 1
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_RESET_PHY_R 1
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW 1
+#define LITTLEENDIAN 1
+#define CONFIG_DOS_PARTITION 1
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */
+#define CFG_USB_OHCI_SLOT_NAME "at91sam9261"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+
+#define CFG_LOAD_ADDR 0x22000000 /* load address */
+
+#define CFG_MEMTEST_START PHYS_SDRAM
+#define CFG_MEMTEST_END 0x23e00000
+
+#define CFG_USE_DATAFLASH_CS0 1
+#undef CFG_USE_NANDFLASH
+
+#ifdef CFG_USE_DATAFLASH_CS0
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CFG_ENV_IS_IN_DATAFLASH 1
+#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CFG_ENV_OFFSET 0x4200
+#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
+
+#else /* CFG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CFG_ENV_IS_IN_NAND 1
+#define CFG_ENV_OFFSET 0x60000
+#define CFG_ENV_OFFSET_REDUND 0x80000
+#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock5 " \
+ "mtdparts=at91_nand:128k(bootstrap)ro," \
+ "256k(uboot)ro,128k(env1)ro," \
+ "128k(env2)ro,2M(linux),-(root) " \
+ "rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CFG_PROMPT "U-Boot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
+#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
new file mode 100644
index 0000000..a8194b5
--- /dev/null
+++ b/include/configs/at91sam9263ek.h
@@ -0,0 +1,206 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the AT91SAM9263EK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME "AT91SAM9263"
+#define AT91_MAIN_CLOCK 199919000 /* from 16.367 MHz crystal */
+#define AT91_MASTER_CLOCK 99959500 /* peripheral = main / 2 */
+#define CFG_HZ 1000000 /* 1us resolution */
+
+#define AT91_SLOW_CLOCK 32768 /* slow clock */
+
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/
+#define CONFIG_AT91SAM9263EK 1 /* on an AT91SAM9263EK Board */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART 1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD 1
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_LCD_LOGO 1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO 1
+#define CONFIG_LCD_INFO_BELOW_LOGO 1
+#define CFG_WHITE_ON_BLACK 1
+#define CONFIG_ATMEL_LCD 1
+#define CONFIG_ATMEL_LCD_BGR555 1
+#define CFG_CONSOLE_IS_IN_ENV 1
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE 1
+#define CONFIG_BOOTP_BOOTPATH 1
+#define CONFIG_BOOTP_GATEWAY 1
+#define CONFIG_BOOTP_HOSTNAME 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_DHCP 1
+#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_USB 1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH 1
+#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
+#define CFG_MAX_DATAFLASH_BANKS 1
+#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
+
+/* NOR flash, if populated */
+#if 1
+#define CFG_NO_FLASH 1
+#else
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#define PHYS_FLASH_1 0x10000000
+#define CFG_FLASH_BASE PHYS_FLASH_1
+#define CFG_MAX_FLASH_SECT 256
+#define CFG_MAX_FLASH_BANKS 1
+#endif
+
+/* NAND flash */
+#define NAND_MAX_CHIPS 1
+#define CFG_MAX_NAND_DEVICE 1
+#define CFG_NAND_BASE 0x40000000
+#define CFG_NAND_DBW_8 1
+
+/* Ethernet */
+#define CONFIG_MACB 1
+#define CONFIG_RMII 1
+#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_RESET_PHY_R 1
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW 1
+#define LITTLEENDIAN 1
+#define CONFIG_DOS_PARTITION 1
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */
+#define CFG_USB_OHCI_SLOT_NAME "at91sam9263"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+
+#define CFG_LOAD_ADDR 0x22000000 /* load address */
+
+#define CFG_MEMTEST_START PHYS_SDRAM
+#define CFG_MEMTEST_END 0x23e00000
+
+#define CFG_USE_DATAFLASH 1
+#undef CFG_USE_NANDFLASH
+
+#ifdef CFG_USE_DATAFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CFG_ENV_IS_IN_DATAFLASH 1
+#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CFG_ENV_OFFSET 0x4200
+#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) "\
+ "rw rootfstype=jffs2"
+
+#else /* CFG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CFG_ENV_IS_IN_NAND 1
+#define CFG_ENV_OFFSET 0x60000
+#define CFG_ENV_OFFSET_REDUND 0x80000
+#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock5 " \
+ "mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+ "rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CFG_PROMPT "U-Boot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
+#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
new file mode 100644
index 0000000..2ad8d05
--- /dev/null
+++ b/include/configs/at91sam9rlek.h
@@ -0,0 +1,175 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the AT91SAM9RLEK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME "AT91SAM9RL"
+#define AT91_MAIN_CLOCK 200000000 /* from 12.000 MHz crystal */
+#define AT91_MASTER_CLOCK 100000000 /* peripheral = main / 2 */
+#define CFG_HZ 1000000 /* 1us resolution */
+
+#define AT91_SLOW_CLOCK 32768 /* slow clock */
+
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_AT91SAM9RL 1 /* It's an Atmel AT91SAM9RL SoC*/
+#define CONFIG_AT91SAM9RLEK 1 /* on an AT91SAM9RLEK Board */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART 1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD 1
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_LCD_LOGO 1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO 1
+#define CONFIG_LCD_INFO_BELOW_LOGO 1
+#define CFG_WHITE_ON_BLACK 1
+#define CONFIG_ATMEL_LCD 1
+#define CONFIG_ATMEL_LCD_RGB565 1
+#define CFG_CONSOLE_IS_IN_ENV 1
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_USB
+
+#define CONFIG_CMD_NAND 1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH 1
+#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
+#define CFG_MAX_DATAFLASH_BANKS 1
+#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
+
+/* NOR flash - not present */
+#define CFG_NO_FLASH 1
+
+/* NAND flash */
+#define NAND_MAX_CHIPS 1
+#define CFG_MAX_NAND_DEVICE 1
+#define CFG_NAND_BASE 0x40000000
+#define CFG_NAND_DBW_8 1
+
+/* Ethernet - not present */
+
+/* USB - not supported */
+
+#define CFG_LOAD_ADDR 0x22000000 /* load address */
+
+#define CFG_MEMTEST_START PHYS_SDRAM
+#define CFG_MEMTEST_END 0x23e00000
+
+#define CFG_USE_DATAFLASH 1
+#undef CFG_USE_NANDFLASH
+
+#ifdef CFG_USE_DATAFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CFG_ENV_IS_IN_DATAFLASH 1
+#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CFG_ENV_OFFSET 0x4200
+#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock0 " \
+ "mtdparts=at91_nand:-(root) "\
+ "rw rootfstype=jffs2"
+
+#else /* CFG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CFG_ENV_IS_IN_NAND 1
+#define CFG_ENV_OFFSET 0x60000
+#define CFG_ENV_OFFSET_REDUND 0x80000
+#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock5 " \
+ "mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+ "rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CFG_PROMPT "U-Boot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000)
+#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 5aad043..3fc9975 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -24,6 +24,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/memory-map.h>
+
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7000 1
@@ -112,8 +114,11 @@
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
#define CONFIG_ATMEL_USART 1
#define CONFIG_MACB 1
@@ -137,11 +142,9 @@
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_INTRAM_BASE 0x24000000
-#define CFG_INTRAM_SIZE 0x8000
-
-#define CFG_SDRAM_BASE 0x10000000
-#define CFG_SDRAM_16BIT 1
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
@@ -150,27 +153,20 @@
#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
#define CFG_MALLOC_LEN (256*1024)
-#define CFG_MALLOC_END \
- ({ \
- DECLARE_GLOBAL_DATA_PTR; \
- CFG_SDRAM_BASE + gd->sdram_size; \
- })
-#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN)
-
#define CFG_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "Uboot> "
+#define CFG_PROMPT "U-Boot> "
#define CFG_CBSIZE 256
#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
-#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x1f00000)
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 95aeab6..ba18eb6 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -24,6 +24,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/memory-map.h>
+
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7000 1
@@ -139,9 +141,9 @@
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MMC
-#define CONFIG_CMD_REGINFO
#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
#undef CONFIG_CMD_XIMG
@@ -170,10 +172,9 @@
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_INTRAM_BASE 0x24000000
-#define CFG_INTRAM_SIZE 0x8000
-
-#define CFG_SDRAM_BASE 0x10000000
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
@@ -185,17 +186,17 @@
#define CFG_DMA_ALLOC_LEN (16384)
/* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "Uboot> "
+#define CFG_PROMPT "U-Boot> "
#define CFG_CBSIZE 256
-#define CFG_MAXARGS 8
+#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
-#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
index 194788b..a528ddf 100644
--- a/include/configs/atstk1003.h
+++ b/include/configs/atstk1003.h
@@ -24,6 +24,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/memory-map.h>
+
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7001 1
@@ -153,10 +155,9 @@
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_INTRAM_BASE 0x24000000
-#define CFG_INTRAM_SIZE 0x8000
-
-#define CFG_SDRAM_BASE 0x10000000
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
@@ -167,17 +168,17 @@
#define CFG_MALLOC_LEN (256*1024)
/* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "Uboot> "
+#define CFG_PROMPT "U-Boot> "
#define CFG_CBSIZE 256
#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
-#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
index b81fc21..fc9585e 100644
--- a/include/configs/atstk1004.h
+++ b/include/configs/atstk1004.h
@@ -24,6 +24,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/memory-map.h>
+
#define CONFIG_AVR32 1
#define CONFIG_AT32AP 1
#define CONFIG_AT32AP7002 1
@@ -153,11 +155,9 @@
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_INTRAM_BASE 0x24000000
-#define CFG_INTRAM_SIZE 0x8000
-
-#define CFG_SDRAM_BASE 0x10000000
-#define CFG_SDRAM_16BIT 1
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 65536
@@ -168,17 +168,17 @@
#define CFG_MALLOC_LEN (256*1024)
/* Allow 2MB for the kernel run-time image */
-#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000)
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00200000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
/* Other configuration settings that shouldn't have to change all that often */
-#define CFG_PROMPT "Uboot> "
+#define CFG_PROMPT "U-Boot> "
#define CFG_CBSIZE 256
#define CFG_MAXARGS 16
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_LONGHELP 1
-#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000)
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
new file mode 100644
index 0000000..9fd49a5
--- /dev/null
+++ b/include/configs/atstk1006.h
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1002 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/memory-map.h>
+
+#define CONFIG_AVR32 1
+#define CONFIG_AT32AP 1
+#define CONFIG_AT32AP7000 1
+#define CONFIG_ATSTK1006 1
+#define CONFIG_ATSTK1000 1
+
+#define CONFIG_ATSTK1000_EXT_FLASH 1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ 1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL 1
+#define CFG_POWER_MANAGER 1
+#define CFG_OSC0_HZ 20000000
+#define CFG_PLL0_DIV 1
+#define CFG_PLL0_MUL 7
+#define CFG_PLL0_SUPPRESS_CYCLES 16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU 0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB 1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA 2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB 1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ * icp = PLLOPT<2>
+ * ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT 0x04
+
+#undef CONFIG_USART0
+#define CONFIG_USART1 1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION 1
+
+#define CONFIG_CMDLINE_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_STACKSIZE (2048)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS \
+ "console=ttyS0 root=mtd3 fbmem=2400k"
+
+#define CONFIG_BOOTCOMMAND \
+ "fsload; bootm $(fileaddr)"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_AUTOBOOT 1
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
+ */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+#define CONFIG_NET_MULTI 1
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART 1
+#define CONFIG_MACB 1
+#define CONFIG_PIO2 1
+#define CFG_NR_PIOS 5
+#define CFG_HSDRAMC 1
+#define CONFIG_MMC 1
+
+#define CFG_DCACHE_LINESZ 32
+#define CFG_ICACHE_LINESZ 32
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#endif
+
+#define CFG_FLASH_BASE 0x00000000
+#define CFG_FLASH_SIZE 0x800000
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 135
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE EBI_SDRAM_BASE
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 65536
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN (256*1024)
+#define CFG_DMA_ALLOC_LEN (16384)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN (16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT "U-Boot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+
+#define CFG_MEMTEST_START EBI_SDRAM_BASE
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x3f00000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
index 0f7bb61..f097e2c 100644
--- a/include/configs/canmb.h
+++ b/include/configs/canmb.h
@@ -40,6 +40,8 @@
#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index d554348..ef50c7c 100644
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -31,6 +31,8 @@
#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
#define CONFIG_CM5200 1 /* ... on CM5200 platform */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Supported commands
*/
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index 1b30e51..fffd1fe 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -50,6 +50,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index e5a8897..ad7cf76 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -40,6 +40,8 @@
#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 4281d73..ec4ed1e 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -65,7 +65,8 @@
#define CONFIG_HARD_SPI 1
#define CONFIG_MXC_SPI 1
-#define CONFIG_MXC_SPI_IFACE 1
+#define CONFIG_DEFAULT_SPI_BUS 1
+#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH)
#define CONFIG_RTC_MC13783 1
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index c89f041..6ec92c3 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -40,6 +40,8 @@
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index 980e9fe..c985927 100644
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -41,6 +41,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index a9c86f9..e4c3f72 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -40,6 +40,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 5218d9c..8dfb9aa 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -50,6 +50,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index 1503598..b6843af 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -35,6 +35,7 @@
#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */
#define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/*
* BOOTP options
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index f614e67..a218f75 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -39,7 +39,7 @@
#define CONFIG_MPC7448HPC2
#define CONFIG_74xx
-#define CONFIG_750FX /* this option to enable init of extended BATs */
+#define CONFIG_HIGH_BATS /* High BATs supported */
#define CONFIG_ALTIVEC /* undef to disable */
#define CFG_BOARD_NAME "MPC7448 HPC II"
diff --git a/include/configs/munices.h b/include/configs/munices.h
index 38b27bb..e0046ec 100644
--- a/include/configs/munices.h
+++ b/include/configs/munices.h
@@ -35,6 +35,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/*
* Command line configuration.
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 2ea48a6..37ba872 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -62,7 +62,8 @@
#define CONFIG_HARD_SPI 1
#define CONFIG_MXC_SPI 1
-#define CONFIG_MXC_SPI_IFACE 1 /* Default SPI interface number */
+#define CONFIG_DEFAULT_SPI_BUS 1
+#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH)
#define CONFIG_RTC_MC13783 1
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 8dde1ef..88bdb03 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -37,6 +37,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
index 0dac516..0913b14 100644
--- a/include/configs/p3mx.h
+++ b/include/configs/p3mx.h
@@ -42,6 +42,7 @@
#if defined (CONFIG_P3M750)
#define CONFIG_750FX /* 750GL/GX/FX */
+#define CONFIG_HIGH_BATS /* High BATs supported */
#define CFG_BOARD_NAME "P3M750"
#define CFG_BUS_HZ 100000000
#define CFG_BUS_CLK CFG_BUS_HZ
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 2ce39c9..c065d33 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -49,6 +49,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
/*
* Serial console configuration
*/
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
new file mode 100644
index 0000000..622a5d4
--- /dev/null
+++ b/include/configs/quad100hd.h
@@ -0,0 +1,298 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * quad100hd.h - configuration for Quad100hd board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_QUAD100HD 1 /* Board is Quad100hd */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_405EP 1 /* Specifc 405EP support*/
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+
+#define PLLMR0_DEFAULT PLLMR0_266_133_66 /* no PCI */
+#define PLLMR1_DEFAULT PLLMR1_266_133_66 /* no PCI */
+
+/* the environment is in the EEPROM by default */
+#define CFG_ENV_IS_IN_EEPROM
+#undef CFG_ENV_IS_IN_FLASH
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_HAS_ETH1 1
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0x01 /* PHY address */
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_PHY_RESET 1
+#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_LOG
+#undef CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#undef CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*-----------------------------------------------------------------------
+ * SDRAM
+ *----------------------------------------------------------------------*/
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0 1
+#define CFG_SDRAM_SIZE 0x02000000 /* 32 MB */
+
+/* FIX! SDRAM timings used in datasheet */
+#define CFG_SDRAM_CL 3 /* CAS latency */
+#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */
+#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */
+#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
+#define CFG_SDRAM_tRFC 66 /* Auto refresh period */
+
+/*
+ * JFFS2
+ */
+#define CFG_JFFS2_FIRST_BANK 0
+#ifdef CFG_KERNEL_IN_JFFS2
+#define CFG_JFFS2_FIRST_SECTOR 0 /* JFFS starts at block 0 */
+#else /* kernel not in JFFS */
+#define CFG_JFFS2_FIRST_SECTOR 8 /* block 0-7 is kernel (1MB = 8 sectors) */
+#endif
+#define CFG_JFFS2_NUM_BANKS 1
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#define CFG_BASE_BAUD 691200
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_info (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */
+#define CFG_I2C_EEPROM_ADDR_LEN 2 /* bytes of address */
+
+#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 8 byte write page size */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CFG_EEPROM_SIZE 0x2000
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFC00000
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (TEXT_BASE)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_INCREMENT 0 /* there is only one bank */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+/* the environment is located before u-boot */
+#define CFG_ENV_ADDR (TEXT_BASE - CFG_ENV_SECT_SIZE)
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE)
+#endif
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_SIZE 0x400 /* Size of Environment vars */
+#define CFG_ENV_OFFSET 0x00000000
+#define CFG_ENABLE_CRC_16 1 /* Intrinsyc formatting used crc16 */
+#endif
+
+/* partly from PPCBoot */
+/* NAND */
+#define CONFIG_NAND
+#ifdef CONFIG_NAND
+#define CFG_NAND_BASE 0x60000000
+#define CFG_NAND_CS 10 /* our CS is GPIO10 */
+#define CFG_NAND_RDY 23 /* our RDY is GPIO23 */
+#define CFG_NAND_CE 24 /* our CE is GPIO24 */
+#define CFG_NAND_CLE 31 /* our CLE is GPIO31 */
+#define CFG_NAND_ALE 30 /* our ALE is GPIO30 */
+#define NAND_MAX_CHIPS 1
+#define CFG_MAX_NAND_DEVICE 1
+#endif
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+/* see ./cpu/ppc4xx/start.S */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ * Taken from PPCBoot board/icecube/icecube.h
+ */
+
+/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
+#define CFG_EBC_PB0AP 0x04002480
+/* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */
+#define CFG_EBC_PB0CR 0xFFC5A000
+#define CFG_EBC_PB1AP 0x04005480
+#define CFG_EBC_PB1CR 0x60018000
+#define CFG_EBC_PB2AP 0x00000000
+#define CFG_EBC_PB2CR 0x00000000
+#define CFG_EBC_PB3AP 0x00000000
+#define CFG_EBC_PB3CR 0x00000000
+#define CFG_EBC_PB4AP 0x00000000
+#define CFG_EBC_PB4CR 0x00000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup (PPC405EP specific)
+ *
+ * Taken in part from PPCBoot board/icecube/icecube.h
+ */
+/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
+#define CFG_GPIO0_OSRH 0x55555550
+#define CFG_GPIO0_OSRL 0x00000110
+#define CFG_GPIO0_ISR1H 0x00000000
+#define CFG_GPIO0_ISR1L 0x15555445
+#define CFG_GPIO0_TSRH 0x00000000
+#define CFG_GPIO0_TSRL 0x00000000
+#define CFG_GPIO0_TCR 0xFFFF8097
+#define CFG_GPIO0_ODR 0x00000000
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/* ENVIRONMENT VARS */
+
+#define CONFIG_IPADDR 192.168.1.67
+#define CONFIG_SERVERIP 192.168.1.50
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_LOADADDR 300000
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 0ebc674..7481556 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -570,6 +570,8 @@
#define CFG_HID2 HID2_HBE
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* DDR @ 0x00000000 */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 4578cae..3e47eb8 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -42,6 +42,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index c62b977..18f5533 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -31,6 +31,8 @@
#define CONFIG_MPC8220 1
#define CONFIG_SORCERY 1 /* Sorcery board */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to
determine the CPU speed. */
#define CFG_MPC8220_CLKIN 60000000 /* ... running at 60MHz */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 49213dc..69d2d67 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -44,6 +44,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/uc101.h b/include/configs/uc101.h
index dc1d7e1..042750e 100644
--- a/include/configs/uc101.h
+++ b/include/configs/uc101.h
@@ -40,6 +40,8 @@
#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index e24d6f7..c203522 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -46,6 +46,8 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
diff --git a/include/lcd.h b/include/lcd.h
index 8a4273c..44ac8ef 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -155,7 +155,35 @@ typedef struct vidinfo {
u_char vl_bpix; /* Bits per pixel, 0 = 1 */
} vidinfo_t;
-#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 */
+
+#elif defined(CONFIG_ATMEL_LCD)
+
+typedef struct vidinfo {
+ u_long vl_col; /* Number of columns (i.e. 640) */
+ u_long vl_row; /* Number of rows (i.e. 480) */
+ u_long vl_clk; /* pixel clock in ps */
+
+ /* LCD configuration register */
+ u_long vl_sync; /* Horizontal / vertical sync */
+ u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+ u_long vl_tft; /* 0 = passive, 1 = TFT */
+
+ /* Horizontal control register. */
+ u_long vl_hsync_len; /* Length of horizontal sync */
+ u_long vl_left_margin; /* Time from sync to picture */
+ u_long vl_right_margin; /* Time from picture to sync */
+
+ /* Vertical control register. */
+ u_long vl_vsync_len; /* Length of vertical sync */
+ u_long vl_upper_margin; /* Time from sync to picture */
+ u_long vl_lower_margin; /* Time from picture to sync */
+
+ u_long mmio; /* Memory mapped registers */
+} vidinfo_t;
+
+extern vidinfo_t panel_info;
+
+#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
/* Video functions */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 4cc4a7d..e2a25a6 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -385,6 +385,10 @@ struct nand_manufacturers {
extern struct nand_flash_dev nand_flash_ids[];
extern struct nand_manufacturers nand_manuf_ids[];
+#ifndef NAND_MAX_CHIPS
+#define NAND_MAX_CHIPS 8
+#endif
+
/**
* struct nand_bbt_descr - bad block table descriptor
* @options: options for this descriptor
diff --git a/include/logbuff.h b/include/logbuff.h
index d06d208..ae7908c 100644
--- a/include/logbuff.h
+++ b/include/logbuff.h
@@ -58,6 +58,7 @@ int drv_logbuff_init (void);
void logbuff_init_ptrs (void);
void logbuff_log(char *msg);
void logbuff_reset (void);
+unsigned long logbuffer_base (void);
#endif /* CONFIG_LOGBUFFER */
diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h
index bd1831e..4449f98 100644
--- a/include/onenand_uboot.h
+++ b/include/onenand_uboot.h
@@ -14,6 +14,8 @@
#ifndef __UBOOT_ONENAND_H
#define __UBOOT_ONENAND_H
+#include <linux/types.h>
+
struct kvec {
void *iov_base;
size_t iov_len;
@@ -22,6 +24,9 @@ struct kvec {
typedef int spinlock_t;
typedef int wait_queue_head_t;
+struct mtd_info;
+struct erase_info;
+
/* Functions */
extern void onenand_init(void);
extern int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
diff --git a/include/spi.h b/include/spi.h
index 3a55a68..7744c2e 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -31,22 +31,87 @@
#define SPI_MODE_1 (0|SPI_CPHA)
#define SPI_MODE_2 (SPI_CPOL|0)
#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA)
-#define SPI_CS_HIGH 0x04 /* chipselect active high? */
+#define SPI_CS_HIGH 0x04 /* CS active high */
#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */
#define SPI_3WIRE 0x10 /* SI/SO signals shared */
#define SPI_LOOP 0x20 /* loopback mode */
-/*
- * The function call pointer type used to drive the chip select.
- */
-typedef void (*spi_chipsel_type)(int cs);
+/* SPI transfer flags */
+#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */
+#define SPI_XFER_END 0x02 /* Deassert CS after transfer */
+/*-----------------------------------------------------------------------
+ * Representation of a SPI slave, i.e. what we're communicating with.
+ *
+ * Drivers are expected to extend this with controller-specific data.
+ *
+ * bus: ID of the bus that the slave is attached to.
+ * cs: ID of the chip select connected to the slave.
+ */
+struct spi_slave {
+ unsigned int bus;
+ unsigned int cs;
+};
/*-----------------------------------------------------------------------
* Initialization, must be called once on start up.
+ *
+ * TODO: I don't think we really need this.
*/
void spi_init(void);
+/*-----------------------------------------------------------------------
+ * Set up communications parameters for a SPI slave.
+ *
+ * This must be called once for each slave. Note that this function
+ * usually doesn't touch any actual hardware, it only initializes the
+ * contents of spi_slave so that the hardware can be easily
+ * initialized later.
+ *
+ * bus: Bus ID of the slave chip.
+ * cs: Chip select ID of the slave chip on the specified bus.
+ * max_hz: Maximum SCK rate in Hz.
+ * mode: Clock polarity, clock phase and other parameters.
+ *
+ * Returns: A spi_slave reference that can be used in subsequent SPI
+ * calls, or NULL if one or more of the parameters are not supported.
+ */
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode);
+
+/*-----------------------------------------------------------------------
+ * Free any memory associated with a SPI slave.
+ *
+ * slave: The SPI slave
+ */
+void spi_free_slave(struct spi_slave *slave);
+
+/*-----------------------------------------------------------------------
+ * Claim the bus and prepare it for communication with a given slave.
+ *
+ * This must be called before doing any transfers with a SPI slave. It
+ * will enable and initialize any SPI hardware as necessary, and make
+ * sure that the SCK line is in the correct idle state. It is not
+ * allowed to claim the same bus for several slaves without releasing
+ * the bus in between.
+ *
+ * slave: The SPI slave
+ *
+ * Returns: 0 if the bus was claimed successfully, or a negative value
+ * if it wasn't.
+ */
+int spi_claim_bus(struct spi_slave *slave);
+
+/*-----------------------------------------------------------------------
+ * Release the SPI bus
+ *
+ * This must be called once for every call to spi_claim_bus() after
+ * all transfers have finished. It may disable any SPI hardware as
+ * appropriate.
+ *
+ * slave: The SPI slave
+ */
+void spi_release_bus(struct spi_slave *slave);
/*-----------------------------------------------------------------------
* SPI transfer
@@ -60,28 +125,67 @@ void spi_init(void);
* input data overwrites the output data (since both are buffered by
* temporary variables, this is OK).
*
- * If the chipsel() function is not NULL, it is called with a parameter
- * of '1' (chip select active) at the start of the transfer and again with
- * a parameter of '0' at the end of the transfer.
- *
- * If the chipsel() function _is_ NULL, it the responsibility of the
- * caller to make the appropriate chip select active before calling
- * spi_xfer() and making it inactive after spi_xfer() returns.
- *
* spi_xfer() interface:
- * chipsel: Routine to call to set/clear the chip select:
- * if chipsel is NULL, it is not used.
- * if(cs), make the chip select active (typically '0').
- * if(!cs), make the chip select inactive (typically '1').
- * dout: Pointer to a string of bits to send out. The bits are
- * held in a byte array and are sent MSB first.
- * din: Pointer to a string of bits that will be filled in.
- * bitlen: How many bits to write and read.
+ * slave: The SPI slave which will be sending/receiving the data.
+ * bitlen: How many bits to write and read.
+ * dout: Pointer to a string of bits to send out. The bits are
+ * held in a byte array and are sent MSB first.
+ * din: Pointer to a string of bits that will be filled in.
+ * flags: A bitwise combination of SPI_XFER_* flags.
*
* Returns: 0 on success, not 0 on failure
*/
-int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din);
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags);
+
+/*-----------------------------------------------------------------------
+ * Determine if a SPI chipselect is valid.
+ * This function is provided by the board if the low-level SPI driver
+ * needs it to determine if a given chipselect is actually valid.
+ *
+ * Returns: 1 if bus:cs identifies a valid chip on this board, 0
+ * otherwise.
+ */
+int spi_cs_is_valid(unsigned int bus, unsigned int cs);
+
+/*-----------------------------------------------------------------------
+ * Activate a SPI chipselect.
+ * This function is provided by the board code when using a driver
+ * that can't control its chipselects automatically (e.g.
+ * common/soft_spi.c). When called, it should activate the chip select
+ * to the device identified by "slave".
+ */
+void spi_cs_activate(struct spi_slave *slave);
+
+/*-----------------------------------------------------------------------
+ * Deactivate a SPI chipselect.
+ * This function is provided by the board code when using a driver
+ * that can't control its chipselects automatically (e.g.
+ * common/soft_spi.c). When called, it should deactivate the chip
+ * select to the device identified by "slave".
+ */
+void spi_cs_deactivate(struct spi_slave *slave);
+
+/*-----------------------------------------------------------------------
+ * Write 8 bits, then read 8 bits.
+ * slave: The SPI slave we're communicating with
+ * byte: Byte to be written
+ *
+ * Returns: The value that was read, or a negative value on error.
+ *
+ * TODO: This function probably shouldn't be inlined.
+ */
+static inline int spi_w8r8(struct spi_slave *slave, unsigned char byte)
+{
+ unsigned char dout[2];
+ unsigned char din[2];
+ int ret;
+
+ dout[0] = byte;
+ dout[1] = 0;
-int spi_select(unsigned int bus, unsigned int dev, unsigned long mode);
+ ret = spi_xfer(slave, 16, dout, din, SPI_XFER_BEGIN | SPI_XFER_END);
+ return ret < 0 ? ret : din[1];
+}
#endif /* _SPI_H_ */
diff --git a/include/spi_flash.h b/include/spi_flash.h
new file mode 100644
index 0000000..de4f174
--- /dev/null
+++ b/include/spi_flash.h
@@ -0,0 +1,70 @@
+/*
+ * Interface to SPI flash
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _SPI_FLASH_H_
+#define _SPI_FLASH_H_
+
+#include <spi.h>
+
+struct spi_flash_region {
+ unsigned int count;
+ unsigned int size;
+};
+
+struct spi_flash {
+ struct spi_slave *spi;
+
+ const char *name;
+
+ u32 size;
+
+ int (*read)(struct spi_flash *flash, u32 offset,
+ size_t len, void *buf);
+ int (*write)(struct spi_flash *flash, u32 offset,
+ size_t len, const void *buf);
+ int (*erase)(struct spi_flash *flash, u32 offset,
+ size_t len);
+};
+
+struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int spi_mode);
+void spi_flash_free(struct spi_flash *flash);
+
+static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
+ size_t len, void *buf)
+{
+ return flash->read(flash, offset, len, buf);
+}
+
+static inline int spi_flash_write(struct spi_flash *flash, u32 offset,
+ size_t len, const void *buf)
+{
+ return flash->write(flash, offset, len, buf);
+}
+
+static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
+ size_t len)
+{
+ return flash->erase(flash, offset, len);
+}
+
+#endif /* _SPI_FLASH_H_ */
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 67506b3..80b149b 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -45,6 +45,8 @@
#include <version.h>
#include <net.h>
#include <serial.h>
+#include <nand.h>
+#include <onenand_uboot.h>
#ifdef CONFIG_DRIVER_SMC91111
#include "../drivers/net/smc91111.h"
@@ -55,14 +57,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_CMD_NAND)
-void nand_init (void);
-#endif
-
-#if defined(CONFIG_CMD_ONENAND)
-void onenand_init(void);
-#endif
-
ulong monitor_flash_len;
#ifdef CONFIG_HAS_DATAFLASH
@@ -121,6 +115,20 @@ void *sbrk (ptrdiff_t increment)
return ((void *) old);
}
+char *strmhz(char *buf, long hz)
+{
+ long l, n;
+ long m;
+
+ n = hz / 1000000L;
+ l = sprintf (buf, "%ld", n);
+ m = (hz % 1000000L) / 1000L;
+ if (m != 0)
+ sprintf (buf + l, ".%03ld", m);
+ return (buf);
+}
+
+
/************************************************************************
* Coloured LED functionality
************************************************************************
@@ -279,7 +287,7 @@ void start_armboot (void)
{
init_fnc_t **init_fnc_ptr;
char *s;
-#ifndef CFG_NO_FLASH
+#if !defined(CFG_NO_FLASH) || defined (CONFIG_VFD) || defined(CONFIG_LCD)
ulong size;
#endif
#if defined(CONFIG_VFD) || defined(CONFIG_LCD)
@@ -323,16 +331,19 @@ void start_armboot (void)
#endif /* CONFIG_VFD */
#ifdef CONFIG_LCD
-# ifndef PAGE_SIZE
-# define PAGE_SIZE 4096
-# endif
- /*
- * reserve memory for LCD display (always full pages)
- */
- /* bss_end is defined in the board-specific linker script */
- addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
- size = lcd_setmem (addr);
- gd->fb_base = addr;
+ /* board init may have inited fb_base */
+ if (!gd->fb_base) {
+# ifndef PAGE_SIZE
+# define PAGE_SIZE 4096
+# endif
+ /*
+ * reserve memory for LCD display (always full pages)
+ */
+ /* bss_end is defined in the board-specific linker script */
+ addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
+ size = lcd_setmem (addr);
+ gd->fb_base = addr;
+ }
#endif /* CONFIG_LCD */
/* armboot_start is defined in the board-specific linker script */
diff --git a/lib_avr32/memset.S b/lib_avr32/memset.S
index dc3b09b..79e3c67 100644
--- a/lib_avr32/memset.S
+++ b/lib_avr32/memset.S
@@ -27,7 +27,7 @@
*
* Returns b in r12
*/
- .text
+ .section .text.memset, "ax", @progbits
.global memset
.type memset, @function
diff --git a/lib_mips/board.c b/lib_mips/board.c
index 1645f2c..532550b 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -28,6 +28,8 @@
#include <version.h>
#include <net.h>
#include <environment.h>
+#include <nand.h>
+#include <spi.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -416,6 +418,17 @@ void board_init_r (gd_t *id, ulong dest_addr)
}
#endif
+#ifdef CONFIG_CMD_NAND
+ puts ("NAND: ");
+ nand_init (); /* go init the NAND */
+#endif
+
+#ifdef CONFIG_CMD_SPI
+ puts ("SPI: ");
+ spi_init (); /* go init the SPI */
+ puts ("ready\n");
+#endif
+
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r ();
diff --git a/lib_ppc/bat_rw.c b/lib_ppc/bat_rw.c
index 912efa7..8546333 100644
--- a/lib_ppc/bat_rw.c
+++ b/lib_ppc/bat_rw.c
@@ -29,46 +29,72 @@
int write_bat (ppc_bat_t bat, unsigned long upper, unsigned long lower)
{
switch (bat) {
+ case DBAT0:
+ mtspr (DBAT0L, lower);
+ mtspr (DBAT0U, upper);
+ break;
case IBAT0:
mtspr (IBAT0L, lower);
mtspr (IBAT0U, upper);
break;
-
+ case DBAT1:
+ mtspr (DBAT1L, lower);
+ mtspr (DBAT1U, upper);
+ break;
case IBAT1:
mtspr (IBAT1L, lower);
mtspr (IBAT1U, upper);
break;
-
+ case DBAT2:
+ mtspr (DBAT2L, lower);
+ mtspr (DBAT2U, upper);
+ break;
case IBAT2:
mtspr (IBAT2L, lower);
mtspr (IBAT2U, upper);
break;
-
+ case DBAT3:
+ mtspr (DBAT3L, lower);
+ mtspr (DBAT3U, upper);
+ break;
case IBAT3:
mtspr (IBAT3L, lower);
mtspr (IBAT3U, upper);
break;
-
- case DBAT0:
- mtspr (DBAT0L, lower);
- mtspr (DBAT0U, upper);
+#ifdef CONFIG_HIGH_BATS
+ case DBAT4:
+ mtspr (DBAT4L, lower);
+ mtspr (DBAT4U, upper);
break;
-
- case DBAT1:
- mtspr (DBAT1L, lower);
- mtspr (DBAT1U, upper);
+ case IBAT4:
+ mtspr (IBAT4L, lower);
+ mtspr (IBAT4U, upper);
break;
-
- case DBAT2:
- mtspr (DBAT2L, lower);
- mtspr (DBAT2U, upper);
+ case DBAT5:
+ mtspr (DBAT5L, lower);
+ mtspr (DBAT5U, upper);
break;
-
- case DBAT3:
- mtspr (DBAT3L, lower);
- mtspr (DBAT3U, upper);
+ case IBAT5:
+ mtspr (IBAT5L, lower);
+ mtspr (IBAT5U, upper);
break;
-
+ case DBAT6:
+ mtspr (DBAT6L, lower);
+ mtspr (DBAT6U, upper);
+ break;
+ case IBAT6:
+ mtspr (IBAT6L, lower);
+ mtspr (IBAT6U, upper);
+ break;
+ case DBAT7:
+ mtspr (DBAT7L, lower);
+ mtspr (DBAT7U, upper);
+ break;
+ case IBAT7:
+ mtspr (IBAT7L, lower);
+ mtspr (IBAT7U, upper);
+ break;
+#endif
default:
return (-1);
}
@@ -82,46 +108,72 @@ int read_bat (ppc_bat_t bat, unsigned long *upper, unsigned long *lower)
unsigned long register l;
switch (bat) {
+ case DBAT0:
+ l = mfspr (DBAT0L);
+ u = mfspr (DBAT0U);
+ break;
case IBAT0:
l = mfspr (IBAT0L);
u = mfspr (IBAT0U);
break;
-
+ case DBAT1:
+ l = mfspr (DBAT1L);
+ u = mfspr (DBAT1U);
+ break;
case IBAT1:
l = mfspr (IBAT1L);
u = mfspr (IBAT1U);
break;
-
+ case DBAT2:
+ l = mfspr (DBAT2L);
+ u = mfspr (DBAT2U);
+ break;
case IBAT2:
l = mfspr (IBAT2L);
u = mfspr (IBAT2U);
break;
-
+ case DBAT3:
+ l = mfspr (DBAT3L);
+ u = mfspr (DBAT3U);
+ break;
case IBAT3:
l = mfspr (IBAT3L);
u = mfspr (IBAT3U);
break;
-
- case DBAT0:
- l = mfspr (DBAT0L);
- u = mfspr (DBAT0U);
+#ifdef CONFIG_HIGH_BATS
+ case DBAT4:
+ l = mfspr (DBAT4L);
+ u = mfspr (DBAT4U);
break;
-
- case DBAT1:
- l = mfspr (DBAT1L);
- u = mfspr (DBAT1U);
+ case IBAT4:
+ l = mfspr (IBAT4L);
+ u = mfspr (IBAT4U);
break;
-
- case DBAT2:
- l = mfspr (DBAT2L);
- u = mfspr (DBAT2U);
+ case DBAT5:
+ l = mfspr (DBAT5L);
+ u = mfspr (DBAT5U);
break;
-
- case DBAT3:
- l = mfspr (DBAT3L);
- u = mfspr (DBAT3U);
+ case IBAT5:
+ l = mfspr (IBAT5L);
+ u = mfspr (IBAT5U);
break;
-
+ case DBAT6:
+ l = mfspr (DBAT6L);
+ u = mfspr (DBAT6U);
+ break;
+ case IBAT6:
+ l = mfspr (IBAT6L);
+ u = mfspr (IBAT6U);
+ break;
+ case DBAT7:
+ l = mfspr (DBAT7L);
+ u = mfspr (DBAT7U);
+ break;
+ case IBAT7:
+ l = mfspr (IBAT7L);
+ u = mfspr (IBAT7U);
+ break;
+#endif
default:
return (-1);
}
@@ -131,3 +183,44 @@ int read_bat (ppc_bat_t bat, unsigned long *upper, unsigned long *lower)
return (0);
}
+
+void print_bats(void)
+{
+ printf("BAT registers:\n");
+
+ printf ("\tIBAT0L = 0x%08X ", mfspr (IBAT0L));
+ printf ("\tIBAT0U = 0x%08X\n", mfspr (IBAT0U));
+ printf ("\tDBAT0L = 0x%08X ", mfspr (DBAT0L));
+ printf ("\tDBAT0U = 0x%08X\n", mfspr (DBAT0U));
+ printf ("\tIBAT1L = 0x%08X ", mfspr (IBAT1L));
+ printf ("\tIBAT1U = 0x%08X\n", mfspr (IBAT1U));
+ printf ("\tDBAT1L = 0x%08X ", mfspr (DBAT1L));
+ printf ("\tDBAT1U = 0x%08X\n", mfspr (DBAT1U));
+ printf ("\tIBAT2L = 0x%08X ", mfspr (IBAT2L));
+ printf ("\tIBAT2U = 0x%08X\n", mfspr (IBAT2U));
+ printf ("\tDBAT2L = 0x%08X ", mfspr (DBAT2L));
+ printf ("\tDBAT2U = 0x%08X\n", mfspr (DBAT2U));
+ printf ("\tIBAT3L = 0x%08X ", mfspr (IBAT3L));
+ printf ("\tIBAT3U = 0x%08X\n", mfspr (IBAT3U));
+ printf ("\tDBAT3L = 0x%08X ", mfspr (DBAT3L));
+ printf ("\tDBAT3U = 0x%08X\n", mfspr (DBAT3U));
+
+#ifdef CONFIG_HIGH_BATS
+ printf ("\tIBAT4L = 0x%08X ", mfspr (IBAT4L));
+ printf ("\tIBAT4U = 0x%08X\n", mfspr (IBAT4U));
+ printf ("\tDBAT4L = 0x%08X ", mfspr (DBAT4L));
+ printf ("\tDBAT4U = 0x%08X\n", mfspr (DBAT4U));
+ printf ("\tIBAT5L = 0x%08X ", mfspr (IBAT5L));
+ printf ("\tIBAT5U = 0x%08X\n", mfspr (IBAT5U));
+ printf ("\tDBAT5L = 0x%08X ", mfspr (DBAT5L));
+ printf ("\tDBAT5U = 0x%08X\n", mfspr (DBAT5U));
+ printf ("\tIBAT6L = 0x%08X ", mfspr (IBAT6L));
+ printf ("\tIBAT6U = 0x%08X\n", mfspr (IBAT6U));
+ printf ("\tDBAT6L = 0x%08X ", mfspr (DBAT6L));
+ printf ("\tDBAT6U = 0x%08X\n", mfspr (DBAT6U));
+ printf ("\tIBAT7L = 0x%08X ", mfspr (IBAT7L));
+ printf ("\tIBAT7U = 0x%08X\n", mfspr (IBAT7U));
+ printf ("\tDBAT7L = 0x%08X ", mfspr (DBAT7L));
+ printf ("\tDBAT7U = 0x%08X\n", mfspr (DBAT7U));
+#endif
+}
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 4956403..a908831 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -93,9 +93,7 @@ void doc_init (void);
#if defined(CONFIG_HARD_SPI)
#include <spi.h>
#endif
-#if defined(CONFIG_CMD_NAND)
-void nand_init (void);
-#endif
+#include <nand.h>
static char *failed = "*** failed ***\n";
@@ -398,6 +396,13 @@ ulong get_effective_memsize(void)
************************************************************************
*/
+#ifdef CONFIG_LOGBUFFER
+unsigned long logbuffer_base(void)
+{
+ return CFG_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN;
+}
+#endif
+
void board_init_f (ulong bootflag)
{
bd_t *bd;
diff --git a/lib_sh/board.c b/lib_sh/board.c
index 883c381..807415c 100644
--- a/lib_sh/board.c
+++ b/lib_sh/board.c
@@ -76,7 +76,7 @@ static int sh_flash_init(void)
}
#if defined(CONFIG_CMD_NAND)
-void nand_init (void);
+#include <nand.h>
static int sh_nand_init(void)
{
printf("NAND: ");
diff --git a/net/eth.c b/net/eth.c
index c4f24c6..21d1496 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -288,7 +288,8 @@ int eth_initialize(bd_t *bis)
#if defined(CONFIG_FSLDMAFEC)
mcdmafec_initialize(bis);
#endif
-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260)
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+ defined(CONFIG_AT91SAM9263)
at91sam9_eth_initialize(bis);
#endif
diff --git a/post/board/lwmon5/fpga.c b/post/board/lwmon5/fpga.c
index b48390b..ef641d7 100644
--- a/post/board/lwmon5/fpga.c
+++ b/post/board/lwmon5/fpga.c
@@ -41,6 +41,15 @@ DECLARE_GLOBAL_DATA_PTR;
#if CONFIG_POST & CFG_POST_BSPEC3
+/* Testpattern for fpga memorytest */
+static uint pattern[] = {
+ 0x55555555,
+ 0xAAAAAAAA,
+ 0xAA5555AA,
+ 0x55AAAA55,
+ 0x0
+};
+
static int one_scratch_test(uint value)
{
uint read_value;
@@ -60,9 +69,42 @@ static int one_scratch_test(uint value)
return ret;
}
+/* FPGA Memory-pattern-test */
+static int fpga_mem_test(void * address)
+{
+ int ret = 1;
+ uint read_value;
+ uint old_value;
+ uint i = 0;
+ /* save content */
+ old_value = in_be32(address);
+
+ while (pattern[i] != 0) {
+ out_be32(address, pattern[i]);
+ /* read other location (protect against data lines capacity) */
+ ret = in_be16((void *)FPGA_VERSION_REG);
+ /* verify test pattern */
+ read_value = in_be32(address);
+
+ if (read_value != pattern[i]) {
+ post_log("FPGA Memory test failed.");
+ post_log(" write %08X, read %08X at address %08X\n",
+ pattern[i], read_value, address);
+ ret = 1;
+ goto out;
+ }
+ i++;
+ }
+
+ ret = 0;
+out:
+ out_be32(address, old_value);
+ return ret;
+}
/* Verify FPGA, get version & memory size */
int fpga_post_test(int flags)
{
+ uint address;
uint old_value;
ushort version;
uint read_value;
@@ -88,6 +130,14 @@ int fpga_post_test(int flags)
read_value = get_ram_size((void *)CFG_FPGA_BASE_1, 0x4000);
post_log("FPGA RAM size: %d bytes\n", read_value);
+ for (address = 0; address < 0x1000; address++) {
+ if (fpga_mem_test((void *)(FPGA_RAM_START + 4*address)) == 1) {
+ ret = 1;
+ goto out;
+ }
+ }
+
+out:
return ret;
}
diff --git a/tools/Makefile b/tools/Makefile
index 5285055..8533a8e 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -44,6 +44,10 @@ LOGO_H = $(OBJTREE)/include/bmp_logo.h
ifeq ($(LOGO_BMP),)
LOGO_BMP= logos/denx.bmp
endif
+ifeq ($(VENDOR),atmel)
+LOGO_BMP= logos/atmel.bmp
+endif
+
#-------------------------------------------------------------------------
diff --git a/tools/logos/atmel.bmp b/tools/logos/atmel.bmp
new file mode 100644
index 0000000..3c445c9
--- /dev/null
+++ b/tools/logos/atmel.bmp
Binary files differ