summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README35
-rw-r--r--board/Barix/ipam390/README.ipam39012
-rw-r--r--doc/README.sha15
3 files changed, 15 insertions, 37 deletions
diff --git a/README b/README
index cadb571..30d7ee3 100644
--- a/README
+++ b/README
@@ -2756,7 +2756,7 @@ CBFS (Coreboot Filesystem) support
with a special header) as build targets. By defining
CONFIG_BUILD_TARGET in the SoC / board header, this
special image will be automatically built upon calling
- make / MAKEALL.
+ make / buildman.
CONFIG_IDENT_STRING
@@ -5083,33 +5083,10 @@ official or latest in the git repository) version of U-Boot sources.
But before you submit such a patch, please verify that your modifi-
cation did not break existing code. At least make sure that *ALL* of
the supported boards compile WITHOUT ANY compiler warnings. To do so,
-just run the "MAKEALL" script, which will configure and build U-Boot
-for ALL supported system. Be warned, this will take a while. You can
-select which (cross) compiler to use by passing a `CROSS_COMPILE'
-environment variable to the script, i. e. to use the ELDK cross tools
-you can type
-
- CROSS_COMPILE=ppc_8xx- MAKEALL
-
-or to build on a native PowerPC system you can type
-
- CROSS_COMPILE=' ' MAKEALL
-
-When using the MAKEALL script, the default behaviour is to build
-U-Boot in the source directory. This location can be changed by
-setting the BUILD_DIR environment variable. Also, for each target
-built, the MAKEALL script saves two log files (<target>.ERR and
-<target>.MAKEALL) in the <source dir>/LOG directory. This default
-location can be changed by setting the MAKEALL_LOGDIR environment
-variable. For example:
-
- export BUILD_DIR=/tmp/build
- export MAKEALL_LOGDIR=/tmp/log
- CROSS_COMPILE=ppc_8xx- MAKEALL
-
-With the above settings build objects are saved in the /tmp/build,
-log files are saved in the /tmp/log and the source tree remains clean
-during the whole build process.
+just run the buildman script (tools/buildman/buildman), which will
+configure and build U-Boot for ALL supported system. Be warned, this
+will take a while. Please see the buildman README, or run 'buildman -H'
+for documentation.
See also "U-Boot Porting Guide" below.
@@ -6565,7 +6542,7 @@ it:
Notes:
-* Before sending the patch, run the MAKEALL script on your patched
+* Before sending the patch, run the buildman script on your patched
source tree and make sure that no errors or warnings are reported
for any of the boards.
diff --git a/board/Barix/ipam390/README.ipam390 b/board/Barix/ipam390/README.ipam390
index 5c45fca..be09280 100644
--- a/board/Barix/ipam390/README.ipam390
+++ b/board/Barix/ipam390/README.ipam390
@@ -31,9 +31,9 @@ loading the next image from a different media, etc).
Compilation
===========
-run "./MAKEALL ipam390" in the u-boot source tree.
-Once this build completes you will have a u-boot.ais file that needs to
-be written to the nand flash.
+run "tools/buildman/buildman -k ipam390" in the u-boot source tree.
+Once this build completes you will have a ../current/ipam390/u-boot.ais file
+that needs to be written to the nand flash.
Flashing the images to NAND
==========================
@@ -71,13 +71,13 @@ here[1] to create an uboot-uart-ais.bin file
- cd to the u-boot source tree
- compile the u-boot for the ipam390 board:
-$ ./MAKEALL ipam390
+$ tools/buildman/buildman -k ipam390
-> Now we shall have u-boot.bin
- Create u-boot-uart-ais.bin
-$ mono HexAIS_OMAP-L138.exe -entrypoint 0xC1080000 -ini
-ipam390-ais-uart.cfg -o ./uboot-uart-ais.bin ./u-boot.bin@0xC1080000;
+$ mono HexAIS_OMAP-L138.exe -entrypoint 0xC1080000 -ini ipam390-ais-uart.cfg \
+ -o ../current/ipam390/uboot-uart-ais.bin ./u-boot.bin@0xC1080000;
Note: The ipam390-ais-uart.cfg is found in the board directory
for the ipam390 board, u-boot:/board/Barix/ipam390/ipam390-ais-uart.cfg
diff --git a/doc/README.sha1 b/doc/README.sha1
index f6cca40..f178f37 100644
--- a/doc/README.sha1
+++ b/doc/README.sha1
@@ -51,7 +51,8 @@ c) now calculate the SHA1 sum from the memoryrange and write
Now you have a U-Boot-Image for the pcs440ep board with the correct SHA1 sum.
-If you do a "./MAKEALL pcs440ep" or a "make all" to get the U-Boot image,
-the correct SHA1 sum will be automagically included in the U-Boot image.
+If you do a "buildman -k pcs440ep" or a "make all" to get the U-Boot image,
+which will be found in ../current/ipam390/ - the correct SHA1 sum will be
+automagically included in the U-Boot image.
Heiko Schocher, 11 Jul 2007