diff options
37 files changed, 904 insertions, 462 deletions
@@ -1081,7 +1081,8 @@ clean: $(obj)board/voiceblue/eeprom \ $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ $(obj)u-boot.lds \ - $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] + $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \ + $(obj)arch/blackfin/cpu/init.{lds,elf} @rm -f $(obj)include/bmp_logo.h @rm -f $(obj)lib/asm-offsets.s @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map} diff --git a/arch/blackfin/cpu/.gitignore b/arch/blackfin/cpu/.gitignore index 0ec9d56..ba986d8 100644 --- a/arch/blackfin/cpu/.gitignore +++ b/arch/blackfin/cpu/.gitignore @@ -1 +1,4 @@ bootrom-asm-offsets.[chs] + +init.lds +init.elf diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile index df10f1b..5deaa9e 100644 --- a/arch/blackfin/cpu/Makefile +++ b/arch/blackfin/cpu/Makefile @@ -13,7 +13,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).o -EXTRA := +EXTRA := init.elf CEXTRA := initcode.o SEXTRA := start.o SOBJS := interrupt.o cache.o @@ -61,6 +61,11 @@ ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS) fi endif +$(obj)init.lds: init.lds.S + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P $^ -o $@ +$(obj)init.elf: $(obj)init.lds $(obj)init.o $(obj)initcode.o + $(LD) $(LDFLAGS) -T $^ -o $@ + ######################################################################### # defines $(obj).depend target diff --git a/arch/blackfin/cpu/cpu.c b/arch/blackfin/cpu/cpu.c index 18dbdf7..6a0bcca 100644 --- a/arch/blackfin/cpu/cpu.c +++ b/arch/blackfin/cpu/cpu.c @@ -19,6 +19,7 @@ #include "cpu.h" #include "serial.h" +#include "initcode.h" ulong bfin_poweron_retx; @@ -44,13 +45,16 @@ void cpu_init_f(ulong bootflag, ulong loaded_from_ldr) extern char _sdata_l1[], _data_l1_lma[], _data_l1_len[]; memcpy(&_sdata_l1, &_data_l1_lma, (unsigned long)_data_l1_len); } -#if defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) - /* The BF537 bootrom will reset the EBIU_AMGCTL register on us - * after it has finished loading the LDR. So configure it again. + + /* + * Make sure our async settings are committed. Some bootroms + * (like the BF537) will reset some registers on us after it + * has finished loading the LDR. Or if we're booting over + * JTAG, the initcode never got a chance to run. Or if we + * aren't booting from parallel flash, the initcode skipped + * this step completely. */ - else - bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); -#endif + program_async_controller(NULL); /* Save RETX so we can pass it while booting Linux */ bfin_poweron_retx = bootflag; diff --git a/arch/blackfin/cpu/gpio.c b/arch/blackfin/cpu/gpio.c index cb96721..5674d42 100644 --- a/arch/blackfin/cpu/gpio.c +++ b/arch/blackfin/cpu/gpio.c @@ -665,6 +665,7 @@ int bfin_gpio_request(unsigned gpio, const char *label) return 0; } +#ifdef CONFIG_BFIN_GPIO_TRACK void bfin_gpio_free(unsigned gpio) { if (check_gpio(gpio) < 0) @@ -679,6 +680,7 @@ void bfin_gpio_free(unsigned gpio) set_label(gpio, "free"); } +#endif #ifdef BFIN_SPECIAL_GPIO_BANKS DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES)); diff --git a/arch/blackfin/cpu/init.S b/arch/blackfin/cpu/init.S new file mode 100644 index 0000000..f48c113 --- /dev/null +++ b/arch/blackfin/cpu/init.S @@ -0,0 +1,9 @@ +#include <asm/blackfin.h> +ENTRY(_start) + sp.l = LO(L1_SRAM_SCRATCH_END - 20); + sp.h = HI(L1_SRAM_SCRATCH_END - 20); + call _initcode; +1: + emuexcpt; + jump 1b; +END(_start) diff --git a/arch/blackfin/cpu/init.lds.S b/arch/blackfin/cpu/init.lds.S new file mode 100644 index 0000000..602e7c8 --- /dev/null +++ b/arch/blackfin/cpu/init.lds.S @@ -0,0 +1,25 @@ +/* + * linker script for simple init.elf + * + * Copyright (c) 2005-2011 Analog Device Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <config.h> +#include <asm/blackfin.h> +#undef ALIGN +#undef ENTRY + +OUTPUT_ARCH(bfin) + +MEMORY +{ + l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE +} + +ENTRY(_start) +SECTIONS +{ + .text.l1 : { *(.text .text.*) } >l1_code +} diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index 750add0..fb3a101 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -4,7 +4,7 @@ * cannot make any function calls as it may be executed all by itself by * the Blackfin's bootrom in LDR format. * - * Copyright (c) 2004-2008 Analog Devices Inc. + * Copyright (c) 2004-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -19,11 +19,15 @@ #include <asm/mach-common/bits/pll.h> #include <asm/mach-common/bits/uart.h> +#define BUG() while (1) { asm volatile("emuexcpt;"); } + #include "serial.h" __attribute__((always_inline)) static inline void serial_init(void) { + uint32_t uart_base = UART_DLL; + #ifdef __ADSPBF54x__ # ifdef BFIN_BOOT_UART_USE_RTS # define BFIN_UART_USE_RTS 1 @@ -65,13 +69,13 @@ static inline void serial_init(void) if (BFIN_DEBUG_EARLY_SERIAL) { int ucen = bfin_read16(&pUART->gctl) & UCEN; - serial_early_init(); + serial_early_init(uart_base); /* If the UART is off, that means we need to program * the baud rate ourselves initially. */ if (ucen != UCEN) - serial_early_set_baud(CONFIG_BAUDRATE); + serial_early_set_baud(uart_base, CONFIG_BAUDRATE); } } @@ -79,6 +83,8 @@ __attribute__((always_inline)) static inline void serial_deinit(void) { #ifdef __ADSPBF54x__ + uint32_t uart_base = UART_DLL; + if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { /* clear forced RTS rather than relying on auto RTS */ bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) & ~FCPOL); @@ -89,6 +95,8 @@ static inline void serial_deinit(void) __attribute__((always_inline)) static inline void serial_putc(char c) { + uint32_t uart_base = UART_DLL; + if (!BFIN_DEBUG_EARLY_SERIAL) return; @@ -101,6 +109,8 @@ static inline void serial_putc(char c) continue; } +#include "initcode.h" + __attribute__((always_inline)) static inline void program_nmi_handler(void) { @@ -166,21 +176,6 @@ program_nmi_handler(void) # define CONFIG_PLL_CTL_VAL (SPORT_HYST | (CONFIG_VCO_MULT << 9) | CONFIG_CLKIN_HALF) #endif -#ifndef CONFIG_EBIU_RSTCTL_VAL -# define CONFIG_EBIU_RSTCTL_VAL 0 /* only MDDRENABLE is useful */ -#endif -#if ((CONFIG_EBIU_RSTCTL_VAL & 0xFFFFFFC4) != 0) -# error invalid EBIU_RSTCTL value: must not set reserved bits -#endif - -#ifndef CONFIG_EBIU_MBSCTL_VAL -# define CONFIG_EBIU_MBSCTL_VAL 0 -#endif - -#if defined(CONFIG_EBIU_DDRQUE_VAL) && ((CONFIG_EBIU_DDRQUE_VAL & 0xFFFF8000) != 0) -# error invalid EBIU_DDRQUE value: must not set reserved bits -#endif - /* Make sure our voltage value is sane so we don't blow up! */ #ifndef CONFIG_VR_CTL_VAL # define BFIN_CCLK ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_CCLK_DIV) @@ -519,7 +514,7 @@ update_serial_clocks(ADI_BOOT_DATA *bs, uint sdivB, uint divB, uint vcoB) unsigned int quotient; for (quotient = 0; dividend > 0; ++quotient) dividend -= divisor; - serial_early_put_div(quotient - ANOMALY_05000230); + serial_early_put_div(UART_DLL, quotient - ANOMALY_05000230); serial_putc('c'); } @@ -636,34 +631,6 @@ check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs) serial_putc('e'); } -__attribute__((always_inline)) static inline void -program_async_controller(ADI_BOOT_DATA *bs) -{ - serial_putc('a'); - - /* Program the async banks controller. */ - bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL); - bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL); - bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); - - serial_putc('b'); - - /* Not all parts have these additional MMRs. */ -#ifdef EBIU_MBSCTL - bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL); -#endif -#ifdef EBIU_MODE -# ifdef CONFIG_EBIU_MODE_VAL - bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL); -# endif -# ifdef CONFIG_EBIU_FCTL_VAL - bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL); -# endif -#endif - - serial_putc('c'); -} - BOOTROM_CALLED_FUNC_ATTR void initcode(ADI_BOOT_DATA *bs) { diff --git a/arch/blackfin/cpu/initcode.h b/arch/blackfin/cpu/initcode.h new file mode 100644 index 0000000..e0aad6d --- /dev/null +++ b/arch/blackfin/cpu/initcode.h @@ -0,0 +1,71 @@ +/* + * Code for early processor initialization + * + * Copyright (c) 2004-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_INITCODE_H__ +#define __BFIN_INITCODE_H__ + +#include <asm/mach-common/bits/bootrom.h> + +#ifndef BFIN_IN_INITCODE +# define serial_putc(c) +#endif + +#ifndef CONFIG_EBIU_RSTCTL_VAL +# define CONFIG_EBIU_RSTCTL_VAL 0 /* only MDDRENABLE is useful */ +#endif +#if ((CONFIG_EBIU_RSTCTL_VAL & 0xFFFFFFC4) != 0) +# error invalid EBIU_RSTCTL value: must not set reserved bits +#endif + +#ifndef CONFIG_EBIU_MBSCTL_VAL +# define CONFIG_EBIU_MBSCTL_VAL 0 +#endif + +#if defined(CONFIG_EBIU_DDRQUE_VAL) && ((CONFIG_EBIU_DDRQUE_VAL & 0xFFFF8000) != 0) +# error invalid EBIU_DDRQUE value: must not set reserved bits +#endif + +__attribute__((always_inline)) static inline void +program_async_controller(ADI_BOOT_DATA *bs) +{ +#ifdef BFIN_IN_INITCODE + /* + * We really only need to setup the async banks early if we're + * booting out of it. Otherwise, do it later on in cpu_init. + */ + if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS && + CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_PARA) + return; +#endif + + serial_putc('a'); + + /* Program the async banks controller. */ + bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL); + bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL); + bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); + + serial_putc('b'); + + /* Not all parts have these additional MMRs. */ +#ifdef EBIU_MBSCTL + bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL); +#endif +#ifdef EBIU_MODE +# ifdef CONFIG_EBIU_MODE_VAL + bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL); +# endif +# ifdef CONFIG_EBIU_FCTL_VAL + bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL); +# endif +#endif + + serial_putc('c'); +} + +#endif diff --git a/arch/blackfin/cpu/jtag-console.c b/arch/blackfin/cpu/jtag-console.c index e0f2975..a77358a 100644 --- a/arch/blackfin/cpu/jtag-console.c +++ b/arch/blackfin/cpu/jtag-console.c @@ -48,11 +48,11 @@ static inline uint32_t bfin_read_emudat(void) static bool jtag_write_emudat(uint32_t emudat) { static bool overflowed = false; - ulong timeout = get_timer(0) + CONFIG_JTAG_CONSOLE_TIMEOUT; + ulong timeout = get_timer(0); while (bfin_read_DBGSTAT() & 0x1) { if (overflowed) return overflowed; - if (timeout < get_timer(0)) + if (get_timer(timeout) > CONFIG_JTAG_CONSOLE_TIMEOUT) overflowed = true; } overflowed = false; diff --git a/arch/blackfin/cpu/reset.c b/arch/blackfin/cpu/reset.c index e23dcc7..ff39035 100644 --- a/arch/blackfin/cpu/reset.c +++ b/arch/blackfin/cpu/reset.c @@ -51,7 +51,9 @@ static void bfin_reset(void) /* The BF526 ROM will crash during reset */ #if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__) - bfin_read_SWRST(); + /* Seems to be fixed with newer parts though ... */ + if (__SILICON_REVISION__ < 1 && bfin_revid() < 1) + bfin_read_SWRST(); #endif /* Wait for the SWRST write to complete. Cannot rely on SSYNC diff --git a/arch/blackfin/cpu/serial.c b/arch/blackfin/cpu/serial.c index 650202e..030160f 100644 --- a/arch/blackfin/cpu/serial.c +++ b/arch/blackfin/cpu/serial.c @@ -39,6 +39,8 @@ #include <common.h> #include <watchdog.h> +#include <serial.h> +#include <linux/compiler.h> #include <asm/blackfin.h> #include <asm/mach-common/bits/uart.h> @@ -49,9 +51,9 @@ DECLARE_GLOBAL_DATA_PTR; #include "serial.h" #ifdef CONFIG_DEBUG_SERIAL -uint16_t cached_lsr[256]; -uint16_t cached_rbr[256]; -size_t cache_count; +static uint16_t cached_lsr[256]; +static uint16_t cached_rbr[256]; +static size_t cache_count; /* The LSR is read-to-clear on some parts, so we have to make sure status * bits aren't inadvertently lost when doing various tests. This also @@ -59,68 +61,34 @@ size_t cache_count; * tally of all the status bits. */ static uint16_t uart_lsr_save; -static uint16_t uart_lsr_read(void) +static uint16_t uart_lsr_read(uint32_t uart_base) { - uint16_t lsr = bfin_read16(&pUART->lsr); + uint16_t lsr = bfin_read(&pUART->lsr); uart_lsr_save |= (lsr & (OE|PE|FE|BI)); return lsr | uart_lsr_save; } /* Just do the clear for everyone since it can't hurt. */ -static void uart_lsr_clear(void) +static void uart_lsr_clear(uint32_t uart_base) { uart_lsr_save = 0; - bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1); + bfin_write(&pUART->lsr, bfin_read(&pUART->lsr) | -1); } #else /* When debugging is disabled, we only care about the DR bit, so if other * bits get set/cleared, we don't really care since we don't read them * anyways (and thus anomaly 05000099 is irrelevant). */ -static uint16_t uart_lsr_read(void) +static inline uint16_t uart_lsr_read(uint32_t uart_base) { - return bfin_read16(&pUART->lsr); + return bfin_read(&pUART->lsr); } -static void uart_lsr_clear(void) +static void uart_lsr_clear(uint32_t uart_base) { - bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1); + bfin_write(&pUART->lsr, bfin_read(&pUART->lsr) | -1); } #endif -/* Symbol for our assembly to call. */ -void serial_set_baud(uint32_t baud) -{ - serial_early_set_baud(baud); -} - -/* Symbol for common u-boot code to call. - * Setup the baudrate (brg: baudrate generator). - */ -void serial_setbrg(void) -{ - serial_set_baud(gd->baudrate); -} - -/* Symbol for our assembly to call. */ -void serial_initialize(void) -{ - serial_early_init(); -} - -/* Symbol for common u-boot code to call. */ -int serial_init(void) -{ - serial_initialize(); - serial_setbrg(); - uart_lsr_clear(); -#ifdef CONFIG_DEBUG_SERIAL - cache_count = 0; - memset(cached_lsr, 0x00, sizeof(cached_lsr)); - memset(cached_rbr, 0x00, sizeof(cached_rbr)); -#endif - return 0; -} - -void serial_putc(const char c) +static void uart_putc(uint32_t uart_base, const char c) { /* send a \r for compatibility */ if (c == '\n') @@ -129,36 +97,36 @@ void serial_putc(const char c) WATCHDOG_RESET(); /* wait for the hardware fifo to clear up */ - while (!(uart_lsr_read() & THRE)) + while (!(uart_lsr_read(uart_base) & THRE)) continue; /* queue the character for transmission */ - bfin_write16(&pUART->thr, c); + bfin_write(&pUART->thr, c); SSYNC(); WATCHDOG_RESET(); } -int serial_tstc(void) +static int uart_tstc(uint32_t uart_base) { WATCHDOG_RESET(); - return (uart_lsr_read() & DR) ? 1 : 0; + return (uart_lsr_read(uart_base) & DR) ? 1 : 0; } -int serial_getc(void) +static int uart_getc(uint32_t uart_base) { uint16_t uart_rbr_val; /* wait for data ! */ - while (!serial_tstc()) + while (!uart_tstc(uart_base)) continue; /* grab the new byte */ - uart_rbr_val = bfin_read16(&pUART->rbr); + uart_rbr_val = bfin_read(&pUART->rbr); #ifdef CONFIG_DEBUG_SERIAL /* grab & clear the LSR */ - uint16_t uart_lsr_val = uart_lsr_read(); + uint16_t uart_lsr_val = uart_lsr_read(uart_base); cached_lsr[cache_count] = uart_lsr_val; cached_rbr[cache_count] = uart_rbr_val; @@ -168,23 +136,171 @@ int serial_getc(void) uint16_t dll, dlh; printf("\n[SERIAL ERROR]\n"); ACCESS_LATCH(); - dll = bfin_read16(&pUART->dll); - dlh = bfin_read16(&pUART->dlh); + dll = bfin_read(&pUART->dll); + dlh = bfin_read(&pUART->dlh); ACCESS_PORT_IER(); printf("\tDLL=0x%x DLH=0x%x\n", dll, dlh); do { --cache_count; - printf("\t%3i: RBR=0x%02x LSR=0x%02x\n", cache_count, + printf("\t%3zu: RBR=0x%02x LSR=0x%02x\n", cache_count, cached_rbr[cache_count], cached_lsr[cache_count]); } while (cache_count > 0); return -1; } #endif - uart_lsr_clear(); + uart_lsr_clear(uart_base); return uart_rbr_val; } +#ifdef CONFIG_SYS_BFIN_UART + +static void uart_puts(uint32_t uart_base, const char *s) +{ + while (*s) + uart_putc(uart_base, *s++); +} + +#define DECL_BFIN_UART(n) \ +static int uart##n##_init(void) \ +{ \ + const unsigned short pins[] = { _P_UART(n, RX), _P_UART(n, TX), 0, }; \ + peripheral_request_list(pins, "bfin-uart"); \ + uart_init(MMR_UART(n)); \ + serial_early_set_baud(MMR_UART(n), gd->baudrate); \ + uart_lsr_clear(MMR_UART(n)); \ + return 0; \ +} \ +\ +static int uart##n##_uninit(void) \ +{ \ + return serial_early_uninit(MMR_UART(n)); \ +} \ +\ +static void uart##n##_setbrg(void) \ +{ \ + serial_early_set_baud(MMR_UART(n), gd->baudrate); \ +} \ +\ +static int uart##n##_getc(void) \ +{ \ + return uart_getc(MMR_UART(n)); \ +} \ +\ +static int uart##n##_tstc(void) \ +{ \ + return uart_tstc(MMR_UART(n)); \ +} \ +\ +static void uart##n##_putc(const char c) \ +{ \ + uart_putc(MMR_UART(n), c); \ +} \ +\ +static void uart##n##_puts(const char *s) \ +{ \ + uart_puts(MMR_UART(n), s); \ +} \ +\ +struct serial_device bfin_serial##n##_device = { \ + .name = "bfin_uart"#n, \ + .init = uart##n##_init, \ + .uninit = uart##n##_uninit, \ + .setbrg = uart##n##_setbrg, \ + .getc = uart##n##_getc, \ + .tstc = uart##n##_tstc, \ + .putc = uart##n##_putc, \ + .puts = uart##n##_puts, \ +}; + +#ifdef UART0_DLL +DECL_BFIN_UART(0) +#endif +#ifdef UART1_DLL +DECL_BFIN_UART(1) +#endif +#ifdef UART2_DLL +DECL_BFIN_UART(2) +#endif +#ifdef UART3_DLL +DECL_BFIN_UART(3) +#endif + +__weak struct serial_device *default_serial_console(void) +{ +#if CONFIG_UART_CONSOLE == 0 + return &bfin_serial0_device; +#elif CONFIG_UART_CONSOLE == 1 + return &bfin_serial1_device; +#elif CONFIG_UART_CONSOLE == 2 + return &bfin_serial2_device; +#elif CONFIG_UART_CONSOLE == 3 + return &bfin_serial3_device; +#endif +} + +void serial_register_bfin_uart(void) +{ +#ifdef UART0_DLL + serial_register(&bfin_serial0_device); +#endif +#ifdef UART1_DLL + serial_register(&bfin_serial1_device); +#endif +#ifdef UART2_DLL + serial_register(&bfin_serial2_device); +#endif +#ifdef UART3_DLL + serial_register(&bfin_serial3_device); +#endif +} + +#else + +/* Symbol for our assembly to call. */ +void serial_set_baud(uint32_t baud) +{ + serial_early_set_baud(UART_DLL, baud); +} + +/* Symbol for common u-boot code to call. + * Setup the baudrate (brg: baudrate generator). + */ +void serial_setbrg(void) +{ + serial_set_baud(gd->baudrate); +} + +/* Symbol for our assembly to call. */ +void serial_initialize(void) +{ + serial_early_init(UART_DLL); +} + +/* Symbol for common u-boot code to call. */ +int serial_init(void) +{ + serial_initialize(); + serial_setbrg(); + uart_lsr_clear(UART_DLL); + return 0; +} + +int serial_tstc(void) +{ + return uart_tstc(UART_DLL); +} + +int serial_getc(void) +{ + return uart_getc(UART_DLL); +} + +void serial_putc(const char c) +{ + uart_putc(UART_DLL, c); +} + void serial_puts(const char *s) { while (*s) @@ -192,3 +308,5 @@ void serial_puts(const char *s) } #endif + +#endif diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/cpu/serial.h index 7999a19..8a076dd 100644 --- a/arch/blackfin/cpu/serial.h +++ b/arch/blackfin/cpu/serial.h @@ -82,26 +82,28 @@ struct bfin_mmr_serial { #define __PASTE_UART(num, pfx, sfx) pfx##num##_##sfx #define _PASTE_UART(num, pfx, sfx) __PASTE_UART(num, pfx, sfx) -#define MMR_UART(mmr) _PASTE_UART(CONFIG_UART_CONSOLE, UART, DLL) -#define P_UART(pin) _PASTE_UART(CONFIG_UART_CONSOLE, P_UART, pin) +#define MMR_UART(n) _PASTE_UART(n, UART, DLL) +#define _P_UART(n, pin) _PASTE_UART(n, P_UART, pin) +#define P_UART(pin) _P_UART(CONFIG_UART_CONSOLE, pin) #ifndef UART_DLL -# define UART_DLL MMR_UART(DLL) +# define UART_DLL MMR_UART(CONFIG_UART_CONSOLE) #else +# define UART0_DLL UART_DLL # if CONFIG_UART_CONSOLE != 0 # error CONFIG_UART_CONSOLE must be 0 on parts with only one UART # endif #endif -#define pUART ((volatile struct bfin_mmr_serial *)UART_DLL) +#define pUART ((volatile struct bfin_mmr_serial *)uart_base) #if BFIN_UART_HW_VER == 2 # define ACCESS_LATCH() # define ACCESS_PORT_IER() #else # define ACCESS_LATCH() \ - bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) | DLAB) + bfin_write(&pUART->lcr, bfin_read(&pUART->lcr) | DLAB) # define ACCESS_PORT_IER() \ - bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) & ~DLAB) + bfin_write(&pUART->lcr, bfin_read(&pUART->lcr) & ~DLAB) #endif __attribute__((always_inline)) @@ -168,30 +170,47 @@ static inline void serial_do_portmux(void) } __attribute__((always_inline)) -static inline void serial_early_init(void) +static inline int uart_init(uint32_t uart_base) { - /* handle portmux crap on different Blackfins */ - serial_do_portmux(); - /* always enable UART -- avoids anomalies 05000309 and 05000350 */ - bfin_write16(&pUART->gctl, UCEN); + bfin_write(&pUART->gctl, UCEN); /* Set LCR to Word Lengh 8-bit word select */ - bfin_write16(&pUART->lcr, WLS_8); + bfin_write(&pUART->lcr, WLS_8); SSYNC(); + + return 0; } __attribute__((always_inline)) -static inline void serial_early_put_div(uint16_t divisor) +static inline int serial_early_init(uint32_t uart_base) +{ + /* handle portmux crap on different Blackfins */ + serial_do_portmux(); + + return uart_init(uart_base); +} + +__attribute__((always_inline)) +static inline int serial_early_uninit(uint32_t uart_base) +{ + /* disable the UART by clearing UCEN */ + bfin_write(&pUART->gctl, 0); + + return 0; +} + +__attribute__((always_inline)) +static inline void serial_early_put_div(uint32_t uart_base, uint16_t divisor) { /* Set DLAB in LCR to Access DLL and DLH */ ACCESS_LATCH(); SSYNC(); /* Program the divisor to get the baud rate we want */ - bfin_write16(&pUART->dll, LOB(divisor)); - bfin_write16(&pUART->dlh, HIB(divisor)); + bfin_write(&pUART->dll, LOB(divisor)); + bfin_write(&pUART->dlh, HIB(divisor)); SSYNC(); /* Clear DLAB in LCR to Access THR RBR IER */ @@ -202,12 +221,14 @@ static inline void serial_early_put_div(uint16_t divisor) __attribute__((always_inline)) static inline uint16_t serial_early_get_div(void) { + uint32_t uart_base = UART_DLL; + /* Set DLAB in LCR to Access DLL and DLH */ ACCESS_LATCH(); SSYNC(); - uint8_t dll = bfin_read16(&pUART->dll); - uint8_t dlh = bfin_read16(&pUART->dlh); + uint8_t dll = bfin_read(&pUART->dll); + uint8_t dlh = bfin_read(&pUART->dlh); uint16_t divisor = (dlh << 8) | dll; /* Clear DLAB in LCR to Access THR RBR IER */ @@ -223,13 +244,14 @@ static inline uint16_t serial_early_get_div(void) #endif __attribute__((always_inline)) -static inline void serial_early_set_baud(uint32_t baud) +static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) { /* Translate from baud into divisor in terms of SCLK. The * weird multiplication is to make sure we over sample just * a little rather than under sample the incoming signals. */ - serial_early_put_div((get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230); + serial_early_put_div(uart_base, + (get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230); } #ifndef BFIN_IN_INITCODE @@ -266,16 +288,16 @@ static inline void serial_early_puts(const char *s) */ #ifdef CONFIG_DEBUG_EARLY_SERIAL # define serial_early_puts(str) \ - call _get_pc; \ - jump 1f; \ + .section .rodata; \ + 7: \ .ascii "Early:"; \ .ascii __FILE__; \ .ascii ": "; \ .ascii str; \ .asciz "\n"; \ - .align 4; \ -1: \ - R0 += 2; \ + .previous; \ + R0.L = 7b; \ + R0.H = 7b; \ call _serial_puts; #else # define serial_early_puts(str) diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S index 15ecb1e..90b4d1a 100644 --- a/arch/blackfin/cpu/start.S +++ b/arch/blackfin/cpu/start.S @@ -33,7 +33,6 @@ #include <config.h> #include <asm/blackfin.h> #include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/dma.h> #include <asm/mach-common/bits/pll.h> #include "serial.h" diff --git a/arch/blackfin/include/asm/blackfin_local.h b/arch/blackfin/include/asm/blackfin_local.h index 48f793a..27034d3 100644 --- a/arch/blackfin/include/asm/blackfin_local.h +++ b/arch/blackfin/include/asm/blackfin_local.h @@ -93,65 +93,61 @@ extern void blackfin_dcache_flush_invalidate_range(const void *, const void *); # define NOP_PAD_ANOMALY_05000198 #endif -#define bfin_read8(addr) ({ \ - uint8_t __v; \ +#define _bfin_readX(addr, size, asm_size, asm_ext) ({ \ + u32 __v; \ __asm__ __volatile__( \ NOP_PAD_ANOMALY_05000198 \ - "%0 = b[%1] (z);" \ + "%0 = " #asm_size "[%1]" #asm_ext ";" \ : "=d" (__v) \ : "a" (addr) \ ); \ __v; }) - -#define bfin_read16(addr) ({ \ - uint16_t __v; \ - __asm__ __volatile__( \ - NOP_PAD_ANOMALY_05000198 \ - "%0 = w[%1] (z);" \ - : "=d" (__v) \ - : "a" (addr) \ - ); \ - __v; }) - -#define bfin_read32(addr) ({ \ - uint32_t __v; \ +#define _bfin_writeX(addr, val, size, asm_size) \ __asm__ __volatile__( \ NOP_PAD_ANOMALY_05000198 \ - "%0 = [%1];" \ - : "=d" (__v) \ - : "a" (addr) \ - ); \ - __v; }) - -#define bfin_readPTR(addr) bfin_read32(addr) - -#define bfin_write8(addr, val) \ - __asm__ __volatile__( \ - NOP_PAD_ANOMALY_05000198 \ - "b[%0] = %1;" \ - : \ - : "a" (addr), "d" (val) \ - : "memory" \ - ) - -#define bfin_write16(addr, val) \ - __asm__ __volatile__( \ - NOP_PAD_ANOMALY_05000198 \ - "w[%0] = %1;" \ + #asm_size "[%0] = %1;" \ : \ - : "a" (addr), "d" (val) \ + : "a" (addr), "d" ((u##size)(val)) \ : "memory" \ ) -#define bfin_write32(addr, val) \ - __asm__ __volatile__( \ - NOP_PAD_ANOMALY_05000198 \ - "[%0] = %1;" \ - : \ - : "a" (addr), "d" (val) \ - : "memory" \ - ) +#define bfin_read8(addr) _bfin_readX(addr, 8, b, (z)) +#define bfin_read16(addr) _bfin_readX(addr, 16, w, (z)) +#define bfin_read32(addr) _bfin_readX(addr, 32, , ) +#define bfin_write8(addr, val) _bfin_writeX(addr, val, 8, b) +#define bfin_write16(addr, val) _bfin_writeX(addr, val, 16, w) +#define bfin_write32(addr, val) _bfin_writeX(addr, val, 32, ) + +#define bfin_read(addr) \ +({ \ + sizeof(*(addr)) == 1 ? bfin_read8(addr) : \ + sizeof(*(addr)) == 2 ? bfin_read16(addr) : \ + sizeof(*(addr)) == 4 ? bfin_read32(addr) : \ + ({ BUG(); 0; }); \ +}) +#define bfin_write(addr, val) \ +do { \ + switch (sizeof(*(addr))) { \ + case 1: bfin_write8(addr, val); break; \ + case 2: bfin_write16(addr, val); break; \ + case 4: bfin_write32(addr, val); break; \ + default: BUG(); \ + } \ +} while (0) + +#define bfin_write_or(addr, bits) \ +do { \ + typeof(addr) __addr = (addr); \ + bfin_write(__addr, bfin_read(__addr) | (bits)); \ +} while (0) + +#define bfin_write_and(addr, bits) \ +do { \ + typeof(addr) __addr = (addr); \ + bfin_write(__addr, bfin_read(__addr) & (bits)); \ +} while (0) +#define bfin_readPTR(addr) bfin_read32(addr) #define bfin_writePTR(addr, val) bfin_write32(addr, val) /* SSYNC implementation for C file */ diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h index 89814cd..bc3c252 100644 --- a/arch/blackfin/include/asm/config.h +++ b/arch/blackfin/include/asm/config.h @@ -121,6 +121,9 @@ #ifndef CONFIG_SYS_MEMTEST_END # define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 8192 + 4) #endif +#ifndef CONFIG_SYS_POST_WORD_ADDR +# define CONFIG_SYS_POST_WORD_ADDR (L1_DATA_B_SRAM + L1_DATA_B_SRAM_SIZE - 4) +#endif /* Check to make sure everything fits in external RAM */ #if CONFIG_SYS_MAX_RAM_SIZE && \ diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 9c0e5d1..224688f 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -142,8 +142,10 @@ struct gpio_port_t { #ifdef CONFIG_BFIN_GPIO_TRACK void bfin_gpio_labels(void); +void bfin_gpio_free(unsigned gpio); #else #define bfin_gpio_labels() +#define bfin_gpio_free(gpio) #define bfin_gpio_request(gpio, label) bfin_gpio_request(gpio) #define bfin_special_gpio_request(gpio, label) bfin_special_gpio_request(gpio) #endif @@ -154,7 +156,6 @@ int bfin_special_gpio_request(unsigned gpio, const char *label); #endif int bfin_gpio_request(unsigned gpio, const char *label); -void bfin_gpio_free(unsigned gpio); int bfin_gpio_direction_input(unsigned gpio); int bfin_gpio_direction_output(unsigned gpio, int value); int bfin_gpio_get_value(unsigned gpio); diff --git a/arch/blackfin/include/asm/mach-bf506/anomaly.h b/arch/blackfin/include/asm/mach-bf506/anomaly.h index e767233..5b3227a 100644 --- a/arch/blackfin/include/asm/mach-bf506/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf506/anomaly.h @@ -5,12 +5,13 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: + * - Revision A, 02/18/2011; ADSP-BF504/BF504F/BF506F Blackfin Processor Anomaly List */ #if __SILICON_REVISION__ < 0 @@ -36,8 +37,6 @@ #define ANOMALY_05000310 (1) /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ #define ANOMALY_05000366 (1) -/* Speculative Fetches Can Cause Undesired External FIFO Operations */ -#define ANOMALY_05000416 (1) /* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ #define ANOMALY_05000426 (1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ @@ -52,12 +51,28 @@ #define ANOMALY_05000472 (1) /* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) +/* SPORT0 Data Transmit Error in Multi-Channel Mode with Internal Clock */ +#define ANOMALY_05000476 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) +/* Disabling ACM During an Ongoing Transfer Can Lead to Undefined ACM Behavior */ +#define ANOMALY_05000478 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) -/* IFLUSH sucks at life */ +/* TWI Vbus Minimum Specification Can Be Violated under Certain Conditions */ +#define ANOMALY_05000486 (1) +/* SPI Master Boot Can Fail Under Certain Conditions */ +#define ANOMALY_05000490 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* Maximum Idd-deepsleep Specifications Can Be Exceeded under Certain Conditions */ +#define ANOMALY_05000495 (1) +/* CNT_COMMAND Functionality Depends on CNT_IMASK Configuration */ +#define ANOMALY_05000498 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -109,6 +124,7 @@ #define ANOMALY_05000364 (0) #define ANOMALY_05000371 (0) #define ANOMALY_05000380 (0) +#define ANOMALY_05000383 (0) #define ANOMALY_05000386 (0) #define ANOMALY_05000389 (0) #define ANOMALY_05000400 (0) @@ -123,6 +139,7 @@ #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) #define ANOMALY_05000475 (0) +#define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/include/asm/mach-bf518/anomaly.h b/arch/blackfin/include/asm/mach-bf518/anomaly.h index 24918c5..56383f7 100644 --- a/arch/blackfin/include/asm/mach-bf518/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf518/anomaly.h @@ -5,16 +5,15 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision E, 01/26/2010; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List + * - Revision F, 05/23/2011; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List */ -/* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */ #if __SILICON_REVISION__ < 0 # error will not work on BF518 silicon version #endif @@ -77,19 +76,29 @@ /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ -#define ANOMALY_05000462 (1) -/* PLL Latches Incorrect Settings During Reset */ -#define ANOMALY_05000469 (1) +#define ANOMALY_05000462 (__SILICON_REVISION__ < 2) /* Incorrect Default MSEL Value in PLL_CTL */ -#define ANOMALY_05000472 (1) +#define ANOMALY_05000472 (__SILICON_REVISION__ < 2) /* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) -/* IFLUSH sucks at life */ +/* PLL Latches Incorrect Settings During Reset */ +#define ANOMALY_05000482 (__SILICON_REVISION__ < 2) +/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ +#define ANOMALY_05000485 (__SILICON_REVISION__ < 2) +/* SPI Master Boot Can Fail Under Certain Conditions */ +#define ANOMALY_05000490 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* CNT_COMMAND Functionality Depends on CNT_IMASK Configuration */ +#define ANOMALY_05000498 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -141,6 +150,7 @@ #define ANOMALY_05000364 (0) #define ANOMALY_05000371 (0) #define ANOMALY_05000380 (0) +#define ANOMALY_05000383 (0) #define ANOMALY_05000386 (0) #define ANOMALY_05000389 (0) #define ANOMALY_05000400 (0) @@ -155,6 +165,6 @@ #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) #define ANOMALY_05000475 (0) -#define ANOMALY_05000485 (0) +#define ANOMALY_05000480 (0) #endif diff --git a/arch/blackfin/include/asm/mach-bf527/anomaly.h b/arch/blackfin/include/asm/mach-bf527/anomaly.h index 72a6369..6884706 100644 --- a/arch/blackfin/include/asm/mach-bf527/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf527/anomaly.h @@ -5,14 +5,14 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision E, 03/15/2010; ADSP-BF526 Blackfin Processor Anomaly List - * - Revision H, 04/29/2010; ADSP-BF527 Blackfin Processor Anomaly List + * - Revision F, 05/23/2011; ADSP-BF526 Blackfin Processor Anomaly List + * - Revision I, 05/23/2011; ADSP-BF527 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -57,7 +57,7 @@ /* Incorrect Access of OTP_STATUS During otp_write() Function */ #define ANOMALY_05000328 (_ANOMALY_BF527(< 2)) /* Host DMA Boot Modes Are Not Functional */ -#define ANOMALY_05000330 (__SILICON_REVISION__ < 2) +#define ANOMALY_05000330 (_ANOMALY_BF527(< 2)) /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ #define ANOMALY_05000337 (_ANOMALY_BF527(< 2)) /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ @@ -135,7 +135,7 @@ /* Incorrect Default Internal Voltage Regulator Setting */ #define ANOMALY_05000410 (_ANOMALY_BF527(< 2)) /* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */ -#define ANOMALY_05000411 (_ANOMALY_BF526_BF527(< 1, < 2)) +#define ANOMALY_05000411 (_ANOMALY_BF526(< 1)) /* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */ #define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2)) /* DEB2_URGENT Bit Not Functional */ @@ -181,11 +181,11 @@ /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) /* The WURESET Bit in the SYSCR Register is not Functional */ -#define ANOMALY_05000445 (1) -/* USB DMA Mode 1 Short Packet Data Corruption */ +#define ANOMALY_05000445 (_ANOMALY_BF527(>= 0)) +/* USB DMA Short Packet Data Corruption */ #define ANOMALY_05000450 (1) /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */ -#define ANOMALY_05000451 (1) +#define ANOMALY_05000451 (_ANOMALY_BF527(>= 0)) /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ #define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0)) /* USB Receive Interrupt Is Not Generated in DMA Mode 1 */ @@ -198,19 +198,19 @@ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ #define ANOMALY_05000462 (1) -/* USB Rx DMA hang */ +/* USB Rx DMA Hang */ #define ANOMALY_05000465 (1) /* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */ #define ANOMALY_05000466 (1) -/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ +/* Possible USB RX Data Corruption When Control & Data EP FIFOs are Accessed via the Core */ #define ANOMALY_05000467 (1) /* PLL Latches Incorrect Settings During Reset */ #define ANOMALY_05000469 (1) /* Incorrect Default MSEL Value in PLL_CTL */ #define ANOMALY_05000472 (_ANOMALY_BF526(>= 0)) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) -/* Possible Lockup Condition whem Modifying PLL from External Memory */ +/* Possible Lockup Condition when Modifying PLL from External Memory */ #define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) @@ -219,11 +219,19 @@ /* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */ #define ANOMALY_05000483 (1) /* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ -#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, < 3)) +#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, >= 0)) /* The CODEC Zero-Cross Detect Feature is not Functional */ #define ANOMALY_05000487 (1) -/* IFLUSH sucks at life */ +/* SPI Master Boot Can Fail Under Certain Conditions */ +#define ANOMALY_05000490 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* CNT_COMMAND Functionality Depends on CNT_IMASK Configuration */ +#define ANOMALY_05000498 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -270,11 +278,13 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000383 (0) #define ANOMALY_05000400 (0) #define ANOMALY_05000402 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) #define ANOMALY_05000474 (0) +#define ANOMALY_05000480 (0) #endif diff --git a/arch/blackfin/include/asm/mach-bf533/anomaly.h b/arch/blackfin/include/asm/mach-bf533/anomaly.h index 30e0eba..03f2b40 100644 --- a/arch/blackfin/include/asm/mach-bf533/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf533/anomaly.h @@ -5,13 +5,13 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision F, 05/25/2010; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List + * - Revision G, 05/23/2011; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -152,7 +152,7 @@ #define ANOMALY_05000277 (__SILICON_REVISION__ < 6) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 6) -/* False Hardware Error Exception when ISR Context Is Not Restored */ +/* False Hardware Error when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 6) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 6) @@ -210,18 +210,25 @@ #define ANOMALY_05000462 (1) /* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */ #define ANOMALY_05000471 (1) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) -/* Possible Lockup Condition whem Modifying PLL from External Memory */ +/* Possible Lockup Condition when Modifying PLL from External Memory */ #define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) -/* IFLUSH sucks at life */ +/* PLL May Latch Incorrect Values Coming Out of Reset */ +#define ANOMALY_05000489 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) -/* These anomalies have been "phased" out of analog.com anomaly sheets and are +/* + * These anomalies have been "phased" out of analog.com anomaly sheets and are * here to show running on older silicon just isn't feasible. */ @@ -355,6 +362,7 @@ #define ANOMALY_05000362 (1) #define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) +#define ANOMALY_05000383 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) #define ANOMALY_05000412 (0) @@ -369,6 +377,7 @@ #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) +#define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/include/asm/mach-bf537/anomaly.h b/arch/blackfin/include/asm/mach-bf537/anomaly.h index d3a2966..543cd3f 100644 --- a/arch/blackfin/include/asm/mach-bf537/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf537/anomaly.h @@ -5,13 +5,13 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision E, 05/25/2010; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List + * - Revision F, 05/23/2011; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -44,18 +44,12 @@ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ -#define ANOMALY_05000157 (__SILICON_REVISION__ < 2) /* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ #define ANOMALY_05000180 (1) -/* Instruction Cache Is Not Functional */ -#define ANOMALY_05000237 (__SILICON_REVISION__ < 2) /* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ #define ANOMALY_05000244 (__SILICON_REVISION__ < 3) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) -/* Buffered CLKIN Output Is Disabled by Default */ -#define ANOMALY_05000247 (1) /* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ #define ANOMALY_05000250 (__SILICON_REVISION__ < 3) /* EMAC TX DMA Error After an Early Frame Abort */ @@ -98,7 +92,7 @@ #define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2)) /* SPI Master Boot Mode Does Not Work Well with Atmel Data Flash Devices */ #define ANOMALY_05000280 (1) -/* False Hardware Error Exception when ISR Context Is Not Restored */ +/* False Hardware Error when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 3) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 3) @@ -162,9 +156,9 @@ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ #define ANOMALY_05000462 (1) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) -/* Possible Lockup Condition whem Modifying PLL from External Memory */ +/* Possible Lockup Condition when Modifying PLL from External Memory */ #define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) @@ -172,8 +166,26 @@ #define ANOMALY_05000480 (__SILICON_REVISION__ < 3) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) -/* IFLUSH sucks at life */ +/* PLL May Latch Incorrect Values Coming Out of Reset */ +#define ANOMALY_05000489 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) + +/* + * These anomalies have been "phased" out of analog.com anomaly sheets and are + * here to show running on older silicon just isn't feasible. + */ + +/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 2) +/* Instruction Cache Is Not Functional */ +#define ANOMALY_05000237 (__SILICON_REVISION__ < 2) +/* Buffered CLKIN Output Is Disabled by Default */ +#define ANOMALY_05000247 (__SILICON_REVISION__ < 2) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -208,6 +220,7 @@ #define ANOMALY_05000363 (0) #define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) +#define ANOMALY_05000383 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) #define ANOMALY_05000400 (0) diff --git a/arch/blackfin/include/asm/mach-bf538/anomaly.h b/arch/blackfin/include/asm/mach-bf538/anomaly.h index 4bc1f4a..b6ca997 100644 --- a/arch/blackfin/include/asm/mach-bf538/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf538/anomaly.h @@ -5,14 +5,14 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision I, 05/25/2010; ADSP-BF538/BF538F Blackfin Processor Anomaly List - * - Revision N, 05/25/2010; ADSP-BF539/BF539F Blackfin Processor Anomaly List + * - Revision J, 05/23/2011; ADSP-BF538/BF538F Blackfin Processor Anomaly List + * - Revision O, 05/23/2011; ADSP-BF539/BF539F Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -56,25 +56,21 @@ #define ANOMALY_05000229 (1) /* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */ #define ANOMALY_05000233 (1) -/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ -#define ANOMALY_05000244 (__SILICON_REVISION__ < 3) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Maximum External Clock Speed for Timers */ #define ANOMALY_05000253 (1) -/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ -#define ANOMALY_05000261 (__SILICON_REVISION__ < 3) /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ #define ANOMALY_05000270 (__SILICON_REVISION__ < 4) /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ -#define ANOMALY_05000272 (1) +#define ANOMALY_05000272 (ANOMALY_BF538) /* Writes to Synchronous SDRAM Memory May Be Lost */ #define ANOMALY_05000273 (__SILICON_REVISION__ < 4) /* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */ #define ANOMALY_05000277 (__SILICON_REVISION__ < 4) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 4) -/* False Hardware Error Exception when ISR Context Is Not Restored */ +/* False Hardware Error when ISR Context Is Not Restored */ #define ANOMALY_05000281 (__SILICON_REVISION__ < 4) /* Memory DMA Corruption with 32-Bit Data and Traffic Control */ #define ANOMALY_05000282 (__SILICON_REVISION__ < 4) @@ -102,8 +98,10 @@ #define ANOMALY_05000313 (__SILICON_REVISION__ < 4) /* Killed System MMR Write Completes Erroneously on Next System MMR Access */ #define ANOMALY_05000315 (__SILICON_REVISION__ < 4) +/* PFx Glitch on Write to PORTFIO or PORTFIO_TOGGLE */ +#define ANOMALY_05000317 (__SILICON_REVISION__ < 4) /* XXX: Same as 05000318 */ /* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */ -#define ANOMALY_05000318 (ANOMALY_BF539 && __SILICON_REVISION__ < 4) +#define ANOMALY_05000318 (__SILICON_REVISION__ < 4) /* XXX: Same as 05000317 */ /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ #define ANOMALY_05000355 (__SILICON_REVISION__ < 5) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ @@ -134,16 +132,32 @@ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ #define ANOMALY_05000462 (1) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) -/* Possible Lockup Condition whem Modifying PLL from External Memory */ +/* Possible Lockup Condition when Modifying PLL from External Memory */ #define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) -/* IFLUSH sucks at life */ +/* PLL May Latch Incorrect Values Coming Out of Reset */ +#define ANOMALY_05000489 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) + +/* + * These anomalies have been "phased" out of analog.com anomaly sheets and are + * here to show running on older silicon just isn't feasible. + */ + +/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 3) +/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 3) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -179,6 +193,7 @@ #define ANOMALY_05000363 (0) #define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) +#define ANOMALY_05000383 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) #define ANOMALY_05000400 (0) @@ -194,6 +209,7 @@ #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) +#define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/include/asm/mach-bf548/anomaly.h b/arch/blackfin/include/asm/mach-bf548/anomaly.h index b9f4ecc..021fb19 100644 --- a/arch/blackfin/include/asm/mach-bf548/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf548/anomaly.h @@ -5,13 +5,13 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision J, 06/03/2010; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List + * - Revision K, 05/23/2011; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -31,111 +31,37 @@ /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) /* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */ -#define ANOMALY_05000220 (1) +#define ANOMALY_05000220 (__SILICON_REVISION__ < 4) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ #define ANOMALY_05000272 (1) -/* False Hardware Error Exception when ISR Context Is Not Restored */ -#define ANOMALY_05000281 (__SILICON_REVISION__ < 1) -/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ -#define ANOMALY_05000304 (__SILICON_REVISION__ < 1) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) -/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ -#define ANOMALY_05000312 (__SILICON_REVISION__ < 1) -/* TWI Slave Boot Mode Is Not Functional */ -#define ANOMALY_05000324 (__SILICON_REVISION__ < 1) /* FIFO Boot Mode Not Functional */ #define ANOMALY_05000325 (__SILICON_REVISION__ < 2) -/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */ -#define ANOMALY_05000327 (__SILICON_REVISION__ < 1) -/* Incorrect Access of OTP_STATUS During otp_write() Function */ -#define ANOMALY_05000328 (__SILICON_REVISION__ < 1) -/* Synchronous Burst Flash Boot Mode Is Not Functional */ -#define ANOMALY_05000329 (__SILICON_REVISION__ < 1) -/* Host DMA Boot Modes Are Not Functional */ -#define ANOMALY_05000330 (__SILICON_REVISION__ < 1) -/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */ -#define ANOMALY_05000334 (__SILICON_REVISION__ < 1) -/* Inadequate Rotary Debounce Logic Duration */ -#define ANOMALY_05000335 (__SILICON_REVISION__ < 1) -/* Phantom Interrupt Occurs After First Configuration of Host DMA Port */ -#define ANOMALY_05000336 (__SILICON_REVISION__ < 1) -/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ -#define ANOMALY_05000337 (__SILICON_REVISION__ < 1) -/* Slave-Mode SPI0 MISO Failure With CPHA = 0 */ -#define ANOMALY_05000338 (__SILICON_REVISION__ < 1) -/* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */ -#define ANOMALY_05000340 (__SILICON_REVISION__ < 1) -/* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */ -#define ANOMALY_05000344 (__SILICON_REVISION__ < 1) -/* USB Calibration Value Is Not Initialized */ -#define ANOMALY_05000346 (__SILICON_REVISION__ < 1) -/* USB Calibration Value to use */ -#define ANOMALY_05000346_value 0x5411 -/* Preboot Routine Incorrectly Alters Reset Value of USB Register */ -#define ANOMALY_05000347 (__SILICON_REVISION__ < 1) -/* Data Lost when Core Reads SDH Data FIFO */ -#define ANOMALY_05000349 (__SILICON_REVISION__ < 1) -/* PLL Status Register Is Inaccurate */ -#define ANOMALY_05000351 (__SILICON_REVISION__ < 1) /* bfrom_SysControl() Firmware Function Performs Improper System Reset */ -#define ANOMALY_05000353 (__SILICON_REVISION__ < 2) -/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ -#define ANOMALY_05000355 (__SILICON_REVISION__ < 1) -/* System Stalled During A Core Access To AMC While A Core Access To NFC FIFO Is Required */ -#define ANOMALY_05000356 (__SILICON_REVISION__ < 1) +/* + * Note: anomaly sheet says this is fixed with bf54x-0.2+, but testing + * shows that the fix itself does not cover all cases. + */ +#define ANOMALY_05000353 (1) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ #define ANOMALY_05000357 (1) /* External Memory Read Access Hangs Core With PLL Bypass */ #define ANOMALY_05000360 (1) /* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */ #define ANOMALY_05000365 (1) -/* WURESET Bit In SYSCR Register Does Not Properly Indicate Hibernate Wake-Up */ -#define ANOMALY_05000367 (__SILICON_REVISION__ < 1) /* Addressing Conflict between Boot ROM and Asynchronous Memory */ #define ANOMALY_05000369 (1) -/* Default PLL MSEL and SSEL Settings Can Cause 400MHz Product To Violate Specifications */ -#define ANOMALY_05000370 (__SILICON_REVISION__ < 1) /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ #define ANOMALY_05000371 (__SILICON_REVISION__ < 2) -/* USB DP/DM Data Pins May Lose State When Entering Hibernate */ -#define ANOMALY_05000372 (__SILICON_REVISION__ < 1) /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */ #define ANOMALY_05000378 (__SILICON_REVISION__ < 2) /* 16-Bit NAND FLASH Boot Mode Is Not Functional */ #define ANOMALY_05000379 (1) -/* 8-Bit NAND Flash Boot Mode Not Functional */ -#define ANOMALY_05000382 (__SILICON_REVISION__ < 1) -/* Boot from OTP Memory Not Functional */ -#define ANOMALY_05000385 (__SILICON_REVISION__ < 1) -/* bfrom_SysControl() Firmware Routine Not Functional */ -#define ANOMALY_05000386 (__SILICON_REVISION__ < 1) -/* Programmable Preboot Settings Not Functional */ -#define ANOMALY_05000387 (__SILICON_REVISION__ < 1) -/* CRC32 Checksum Support Not Functional */ -#define ANOMALY_05000388 (__SILICON_REVISION__ < 1) -/* Reset Vector Must Not Be in SDRAM Memory Space */ -#define ANOMALY_05000389 (__SILICON_REVISION__ < 1) -/* Changed Meaning of BCODE Field in SYSCR Register */ -#define ANOMALY_05000390 (__SILICON_REVISION__ < 1) -/* Repeated Boot from Page-Mode or Burst-Mode Flash Memory May Fail */ -#define ANOMALY_05000391 (__SILICON_REVISION__ < 1) -/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */ -#define ANOMALY_05000392 (__SILICON_REVISION__ < 1) -/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */ -#define ANOMALY_05000393 (__SILICON_REVISION__ < 1) -/* Log Buffer Not Functional */ -#define ANOMALY_05000394 (__SILICON_REVISION__ < 1) -/* Hook Routine Not Functional */ -#define ANOMALY_05000395 (__SILICON_REVISION__ < 1) -/* Header Indirect Bit Not Functional */ -#define ANOMALY_05000396 (__SILICON_REVISION__ < 1) -/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */ -#define ANOMALY_05000397 (__SILICON_REVISION__ < 1) /* Lockbox SESR Disallows Certain User Interrupts */ #define ANOMALY_05000404 (__SILICON_REVISION__ < 2) /* Lockbox SESR Firmware Does Not Save/Restore Full Context */ @@ -157,7 +83,7 @@ /* Speculative Fetches Can Cause Undesired External FIFO Operations */ #define ANOMALY_05000416 (1) /* Multichannel SPORT Channel Misalignment Under Specific Configuration */ -#define ANOMALY_05000425 (1) +#define ANOMALY_05000425 (__SILICON_REVISION__ < 4) /* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ #define ANOMALY_05000426 (1) /* CORE_EPPI_PRIO bit and SYS_EPPI_PRIO bit in the HMDMA1_CONTROL register are not functional */ @@ -170,8 +96,6 @@ #define ANOMALY_05000431 (__SILICON_REVISION__ < 3) /* SW Breakpoints Ignored Upon Return From Lockbox Authentication */ #define ANOMALY_05000434 (1) -/* OTP Write Accesses Not Supported */ -#define ANOMALY_05000442 (__SILICON_REVISION__ < 1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) /* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */ @@ -182,34 +106,32 @@ #define ANOMALY_05000448 (__SILICON_REVISION__ == 1) /* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */ #define ANOMALY_05000449 (__SILICON_REVISION__ == 1) -/* USB DMA Mode 1 Short Packet Data Corruption */ +/* USB DMA Short Packet Data Corruption */ #define ANOMALY_05000450 (1) -/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ -#define ANOMALY_05000452 (__SILICON_REVISION__ < 1) /* USB Receive Interrupt Is Not Generated in DMA Mode 1 */ #define ANOMALY_05000456 (1) /* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */ #define ANOMALY_05000457 (1) /* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */ -#define ANOMALY_05000460 (1) +#define ANOMALY_05000460 (__SILICON_REVISION__ < 4) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ -#define ANOMALY_05000462 (1) +#define ANOMALY_05000462 (__SILICON_REVISION__ < 4) /* USB DMA RX Data Corruption */ -#define ANOMALY_05000463 (1) +#define ANOMALY_05000463 (__SILICON_REVISION__ < 4) /* USB TX DMA Hang */ -#define ANOMALY_05000464 (1) -/* USB Rx DMA hang */ +#define ANOMALY_05000464 (__SILICON_REVISION__ < 4) +/* USB Rx DMA Hang */ #define ANOMALY_05000465 (1) /* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */ -#define ANOMALY_05000466 (1) -/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ -#define ANOMALY_05000467 (1) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000466 (__SILICON_REVISION__ < 4) +/* Possible USB RX Data Corruption When Control & Data EP FIFOs are Accessed via the Core */ +#define ANOMALY_05000467 (__SILICON_REVISION__ < 4) +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) -/* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */ -#define ANOMALY_05000474 (1) +/* Access to DDR SDRAM Causes System Hang with Certain PLL Settings */ +#define ANOMALY_05000474 (__SILICON_REVISION__ < 4) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ @@ -219,9 +141,111 @@ /* DDR Trim May Not Be Performed for Certain VLEV Values in OTP Page PBS00L */ #define ANOMALY_05000484 (__SILICON_REVISION__ < 3) /* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ -#define ANOMALY_05000485 (__SILICON_REVISION__ >= 2) -/* IFLUSH sucks at life */ +#define ANOMALY_05000485 (__SILICON_REVISION__ > 1 && __SILICON_REVISION__ < 4) +/* PLL May Latch Incorrect Values Coming Out of Reset */ +#define ANOMALY_05000489 (1) +/* SPI Master Boot Can Fail Under Certain Conditions */ +#define ANOMALY_05000490 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* CNT_COMMAND Functionality Depends on CNT_IMASK Configuration */ +#define ANOMALY_05000498 (1) +/* Nand Flash Controller Hangs When the AMC Requests the Async Pins During the last 16 Bytes of a Page Write Operation. */ +#define ANOMALY_05000500 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) +/* Async Memory Writes May Be Skipped When Using Odd Clock Ratios */ +#define ANOMALY_05000502 (1) + +/* + * These anomalies have been "phased" out of analog.com anomaly sheets and are + * here to show running on older silicon just isn't feasible. + */ + +/* False Hardware Error when ISR Context Is Not Restored */ +#define ANOMALY_05000281 (__SILICON_REVISION__ < 1) +/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ +#define ANOMALY_05000304 (__SILICON_REVISION__ < 1) +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (__SILICON_REVISION__ < 1) +/* TWI Slave Boot Mode Is Not Functional */ +#define ANOMALY_05000324 (__SILICON_REVISION__ < 1) +/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */ +#define ANOMALY_05000327 (__SILICON_REVISION__ < 1) +/* Incorrect Access of OTP_STATUS During otp_write() Function */ +#define ANOMALY_05000328 (__SILICON_REVISION__ < 1) +/* Synchronous Burst Flash Boot Mode Is Not Functional */ +#define ANOMALY_05000329 (__SILICON_REVISION__ < 1) +/* Host DMA Boot Modes Are Not Functional */ +#define ANOMALY_05000330 (__SILICON_REVISION__ < 1) +/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */ +#define ANOMALY_05000334 (__SILICON_REVISION__ < 1) +/* Inadequate Rotary Debounce Logic Duration */ +#define ANOMALY_05000335 (__SILICON_REVISION__ < 1) +/* Phantom Interrupt Occurs After First Configuration of Host DMA Port */ +#define ANOMALY_05000336 (__SILICON_REVISION__ < 1) +/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ +#define ANOMALY_05000337 (__SILICON_REVISION__ < 1) +/* Slave-Mode SPI0 MISO Failure With CPHA = 0 */ +#define ANOMALY_05000338 (__SILICON_REVISION__ < 1) +/* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */ +#define ANOMALY_05000340 (__SILICON_REVISION__ < 1) +/* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */ +#define ANOMALY_05000344 (__SILICON_REVISION__ < 1) +/* USB Calibration Value Is Not Initialized */ +#define ANOMALY_05000346 (__SILICON_REVISION__ < 1) +/* USB Calibration Value to use */ +#define ANOMALY_05000346_value 0x5411 +/* Preboot Routine Incorrectly Alters Reset Value of USB Register */ +#define ANOMALY_05000347 (__SILICON_REVISION__ < 1) +/* Data Lost when Core Reads SDH Data FIFO */ +#define ANOMALY_05000349 (__SILICON_REVISION__ < 1) +/* PLL Status Register Is Inaccurate */ +#define ANOMALY_05000351 (__SILICON_REVISION__ < 1) +/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ +#define ANOMALY_05000355 (__SILICON_REVISION__ < 1) +/* System Stalled During A Core Access To AMC While A Core Access To NFC FIFO Is Required */ +#define ANOMALY_05000356 (__SILICON_REVISION__ < 1) +/* WURESET Bit In SYSCR Register Does Not Properly Indicate Hibernate Wake-Up */ +#define ANOMALY_05000367 (__SILICON_REVISION__ < 1) +/* Default PLL MSEL and SSEL Settings Can Cause 400MHz Product To Violate Specifications */ +#define ANOMALY_05000370 (__SILICON_REVISION__ < 1) +/* USB DP/DM Data Pins May Lose State When Entering Hibernate */ +#define ANOMALY_05000372 (__SILICON_REVISION__ < 1) +/* 8-Bit NAND Flash Boot Mode Not Functional */ +#define ANOMALY_05000382 (__SILICON_REVISION__ < 1) +/* Boot from OTP Memory Not Functional */ +#define ANOMALY_05000385 (__SILICON_REVISION__ < 1) +/* bfrom_SysControl() Firmware Routine Not Functional */ +#define ANOMALY_05000386 (__SILICON_REVISION__ < 1) +/* Programmable Preboot Settings Not Functional */ +#define ANOMALY_05000387 (__SILICON_REVISION__ < 1) +/* CRC32 Checksum Support Not Functional */ +#define ANOMALY_05000388 (__SILICON_REVISION__ < 1) +/* Reset Vector Must Not Be in SDRAM Memory Space */ +#define ANOMALY_05000389 (__SILICON_REVISION__ < 1) +/* Changed Meaning of BCODE Field in SYSCR Register */ +#define ANOMALY_05000390 (__SILICON_REVISION__ < 1) +/* Repeated Boot from Page-Mode or Burst-Mode Flash Memory May Fail */ +#define ANOMALY_05000391 (__SILICON_REVISION__ < 1) +/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */ +#define ANOMALY_05000392 (__SILICON_REVISION__ < 1) +/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */ +#define ANOMALY_05000393 (__SILICON_REVISION__ < 1) +/* Log Buffer Not Functional */ +#define ANOMALY_05000394 (__SILICON_REVISION__ < 1) +/* Hook Routine Not Functional */ +#define ANOMALY_05000395 (__SILICON_REVISION__ < 1) +/* Header Indirect Bit Not Functional */ +#define ANOMALY_05000396 (__SILICON_REVISION__ < 1) +/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */ +#define ANOMALY_05000397 (__SILICON_REVISION__ < 1) +/* OTP Write Accesses Not Supported */ +#define ANOMALY_05000442 (__SILICON_REVISION__ < 1) +/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ +#define ANOMALY_05000452 (__SILICON_REVISION__ < 1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -274,5 +298,6 @@ #define ANOMALY_05000435 (0) #define ANOMALY_05000440 (0) #define ANOMALY_05000475 (0) +#define ANOMALY_05000480 (0) #endif diff --git a/arch/blackfin/include/asm/mach-bf561/anomaly.h b/arch/blackfin/include/asm/mach-bf561/anomaly.h index 9313c27..b27173c 100644 --- a/arch/blackfin/include/asm/mach-bf561/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf561/anomaly.h @@ -5,13 +5,13 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision R, 05/25/2010; ADSP-BF561 Blackfin Processor Anomaly List + * - Revision S, 05/23/2011; ADSP-BF561 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -26,62 +26,16 @@ #define ANOMALY_05000074 (1) /* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ #define ANOMALY_05000099 (__SILICON_REVISION__ < 5) -/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */ -#define ANOMALY_05000116 (__SILICON_REVISION__ < 3) /* TESTSET Instructions Restricted to 32-Bit Aligned Memory Locations */ #define ANOMALY_05000120 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Erroneous Exception when Enabling Cache */ -#define ANOMALY_05000125 (__SILICON_REVISION__ < 3) /* SIGNBITS Instruction Not Functional under Certain Conditions */ #define ANOMALY_05000127 (1) -/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */ -#define ANOMALY_05000134 (__SILICON_REVISION__ < 3) -/* Enable wires from the Data Watchpoint Address Control Register (WPDACTL) are swapped */ -#define ANOMALY_05000135 (__SILICON_REVISION__ < 3) -/* Stall in multi-unit DMA operations */ -#define ANOMALY_05000136 (__SILICON_REVISION__ < 3) -/* Allowing the SPORT RX FIFO to fill will cause an overflow */ -#define ANOMALY_05000140 (__SILICON_REVISION__ < 3) -/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ -#define ANOMALY_05000141 (__SILICON_REVISION__ < 3) -/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ -#define ANOMALY_05000142 (__SILICON_REVISION__ < 3) -/* DMA and TESTSET conflict when both are accessing external memory */ -#define ANOMALY_05000144 (__SILICON_REVISION__ < 3) -/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */ -#define ANOMALY_05000145 (__SILICON_REVISION__ < 3) -/* MDMA may lose the first few words of a descriptor chain */ -#define ANOMALY_05000146 (__SILICON_REVISION__ < 3) -/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ -#define ANOMALY_05000147 (__SILICON_REVISION__ < 3) /* IMDMA S1/D1 Channel May Stall */ #define ANOMALY_05000149 (1) -/* DMA engine may lose data due to incorrect handshaking */ -#define ANOMALY_05000150 (__SILICON_REVISION__ < 3) -/* DMA stalls when all three controllers read data from the same source */ -#define ANOMALY_05000151 (__SILICON_REVISION__ < 3) -/* Execution stall when executing in L2 and doing external accesses */ -#define ANOMALY_05000152 (__SILICON_REVISION__ < 3) -/* Frame Delay in SPORT Multichannel Mode */ -#define ANOMALY_05000153 (__SILICON_REVISION__ < 3) -/* SPORT TFS signal stays active in multichannel mode outside of valid channels */ -#define ANOMALY_05000154 (__SILICON_REVISION__ < 3) /* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */ #define ANOMALY_05000156 (__SILICON_REVISION__ < 4) -/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ -#define ANOMALY_05000157 (__SILICON_REVISION__ < 3) -/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ -#define ANOMALY_05000159 (__SILICON_REVISION__ < 3) -/* A read from external memory may return a wrong value with data cache enabled */ -#define ANOMALY_05000160 (__SILICON_REVISION__ < 3) -/* Data Cache Fill data can be corrupted after/during Instruction DMA if certain core stalls exist */ -#define ANOMALY_05000161 (__SILICON_REVISION__ < 3) -/* DMEM_CONTROL<12> is not set on Reset */ -#define ANOMALY_05000162 (__SILICON_REVISION__ < 3) -/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */ -#define ANOMALY_05000163 (__SILICON_REVISION__ < 3) /* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */ #define ANOMALY_05000166 (1) /* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ @@ -92,10 +46,6 @@ #define ANOMALY_05000169 (__SILICON_REVISION__ < 5) /* Boot-ROM Modifies SICA_IWRx Wakeup Registers */ #define ANOMALY_05000171 (__SILICON_REVISION__ < 5) -/* DSPID register values incorrect */ -#define ANOMALY_05000172 (__SILICON_REVISION__ < 3) -/* DMA vs Core accesses to external memory */ -#define ANOMALY_05000173 (__SILICON_REVISION__ < 3) /* Cache Fill Buffer Data lost */ #define ANOMALY_05000174 (__SILICON_REVISION__ < 5) /* Overlapping Sequencer and Memory Stalls */ @@ -124,8 +74,6 @@ #define ANOMALY_05000189 (__SILICON_REVISION__ < 5) /* PPI Not Functional at Core Voltage < 1Volt */ #define ANOMALY_05000190 (1) -/* PPI does not invert the Driving PPICLK edge in Transmit Modes */ -#define ANOMALY_05000191 (__SILICON_REVISION__ < 3) /* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ #define ANOMALY_05000193 (__SILICON_REVISION__ < 5) /* Restarting SPORT in Specific Modes May Cause Data Corruption */ @@ -213,10 +161,10 @@ /* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ #define ANOMALY_05000276 (__SILICON_REVISION__ < 5) /* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */ -#define ANOMALY_05000277 (__SILICON_REVISION__ < 3) +#define ANOMALY_05000277 (__SILICON_REVISION__ < 5) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 5) -/* False Hardware Error Exception when ISR Context Is Not Restored */ +/* False Hardware Error when ISR Context Is Not Restored */ /* Temporarily walk around for bug 5423 till this issue is confirmed by * official anomaly document. It looks 05000281 still exists on bf561 * v0.5. @@ -270,8 +218,6 @@ #define ANOMALY_05000366 (1) /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ #define ANOMALY_05000371 (1) -/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ -#define ANOMALY_05000402 (__SILICON_REVISION__ == 4) /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ #define ANOMALY_05000403 (1) /* TESTSET Instruction Causes Data Corruption with Writeback Data Cache Enabled */ @@ -294,16 +240,82 @@ #define ANOMALY_05000462 (1) /* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */ #define ANOMALY_05000471 (1) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) -/* Possible Lockup Condition whem Modifying PLL from External Memory */ +/* Possible Lockup Condition when Modifying PLL from External Memory */ #define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) -/* IFLUSH sucks at life */ +/* PLL May Latch Incorrect Values Coming Out of Reset */ +#define ANOMALY_05000489 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ #define ANOMALY_05000491 (1) +/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */ +#define ANOMALY_05000494 (1) +/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */ +#define ANOMALY_05000501 (1) + +/* + * These anomalies have been "phased" out of analog.com anomaly sheets and are + * here to show running on older silicon just isn't feasible. + */ + +/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */ +#define ANOMALY_05000116 (__SILICON_REVISION__ < 3) +/* Erroneous Exception when Enabling Cache */ +#define ANOMALY_05000125 (__SILICON_REVISION__ < 3) +/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */ +#define ANOMALY_05000134 (__SILICON_REVISION__ < 3) +/* Enable wires from the Data Watchpoint Address Control Register (WPDACTL) are swapped */ +#define ANOMALY_05000135 (__SILICON_REVISION__ < 3) +/* Stall in multi-unit DMA operations */ +#define ANOMALY_05000136 (__SILICON_REVISION__ < 3) +/* Allowing the SPORT RX FIFO to fill will cause an overflow */ +#define ANOMALY_05000140 (__SILICON_REVISION__ < 3) +/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ +#define ANOMALY_05000141 (__SILICON_REVISION__ < 3) +/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ +#define ANOMALY_05000142 (__SILICON_REVISION__ < 3) +/* DMA and TESTSET conflict when both are accessing external memory */ +#define ANOMALY_05000144 (__SILICON_REVISION__ < 3) +/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */ +#define ANOMALY_05000145 (__SILICON_REVISION__ < 3) +/* MDMA may lose the first few words of a descriptor chain */ +#define ANOMALY_05000146 (__SILICON_REVISION__ < 3) +/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ +#define ANOMALY_05000147 (__SILICON_REVISION__ < 3) +/* DMA engine may lose data due to incorrect handshaking */ +#define ANOMALY_05000150 (__SILICON_REVISION__ < 3) +/* DMA stalls when all three controllers read data from the same source */ +#define ANOMALY_05000151 (__SILICON_REVISION__ < 3) +/* Execution stall when executing in L2 and doing external accesses */ +#define ANOMALY_05000152 (__SILICON_REVISION__ < 3) +/* Frame Delay in SPORT Multichannel Mode */ +#define ANOMALY_05000153 (__SILICON_REVISION__ < 3) +/* SPORT TFS signal stays active in multichannel mode outside of valid channels */ +#define ANOMALY_05000154 (__SILICON_REVISION__ < 3) +/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 3) +/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ +#define ANOMALY_05000159 (__SILICON_REVISION__ < 3) +/* A read from external memory may return a wrong value with data cache enabled */ +#define ANOMALY_05000160 (__SILICON_REVISION__ < 3) +/* Data Cache Fill data can be corrupted after/during Instruction DMA if certain core stalls exist */ +#define ANOMALY_05000161 (__SILICON_REVISION__ < 3) +/* DMEM_CONTROL<12> is not set on Reset */ +#define ANOMALY_05000162 (__SILICON_REVISION__ < 3) +/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */ +#define ANOMALY_05000163 (__SILICON_REVISION__ < 3) +/* DSPID register values incorrect */ +#define ANOMALY_05000172 (__SILICON_REVISION__ < 3) +/* DMA vs Core accesses to external memory */ +#define ANOMALY_05000173 (__SILICON_REVISION__ < 3) +/* PPI does not invert the Driving PPICLK edge in Transmit Modes */ +#define ANOMALY_05000191 (__SILICON_REVISION__ < 3) +/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ +#define ANOMALY_05000402 (__SILICON_REVISION__ == 4) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000119 (0) @@ -316,6 +328,7 @@ #define ANOMALY_05000353 (1) #define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) +#define ANOMALY_05000383 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) #define ANOMALY_05000400 (0) @@ -330,6 +343,7 @@ #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) +#define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h index b17207f..300ef44 100644 --- a/arch/blackfin/include/asm/portmux.h +++ b/arch/blackfin/include/asm/portmux.h @@ -22,11 +22,15 @@ #define peripheral_request_list(per, label) peripheral_request_list(per) #endif +#ifndef __ASSEMBLY__ + int peripheral_request(unsigned short per, const char *label); void peripheral_free(unsigned short per); int peripheral_request_list(const unsigned short per[], const char *label); void peripheral_free_list(const unsigned short per[]); +#endif + #include <asm/blackfin.h> #ifndef P_SPORT2_TFS diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index 7c33893..bfdb586 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -12,6 +12,7 @@ #include <common.h> #include <command.h> #include <stdio_dev.h> +#include <serial.h> #include <environment.h> #include <malloc.h> #include <mmc.h> @@ -49,7 +50,7 @@ static inline void serial_early_puts(const char *s) static int display_banner(void) { - printf("\n\n%s\n\n", version_string); + display_options(); printf("CPU: ADSP %s " "(Detected Rev: 0.%d) " "(%s boot)\n", @@ -262,6 +263,9 @@ void board_init_f(ulong bootflag) init_baudrate(); serial_early_puts("Serial init\n"); serial_init(); +#ifdef CONFIG_SERIAL_MULTI + serial_initialize(); +#endif serial_early_puts("Console init flash\n"); console_init_f(); serial_early_puts("End of early debugging\n"); diff --git a/board/cm-bf537e/cm-bf537e.c b/board/cm-bf537e/cm-bf537e.c index 1e350dc..38dbc6e 100644 --- a/board/cm-bf537e/cm-bf537e.c +++ b/board/cm-bf537e/cm-bf537e.c @@ -24,27 +24,37 @@ int checkboard(void) return 0; } -#ifdef CONFIG_BFIN_MAC -static void board_init_enetaddr(uchar *mac_addr) +static void board_init_enetaddr(char *var) { - puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); - eth_setenv_enetaddr("ethaddr", mac_addr); +#ifdef CONFIG_NET_MULTI + uchar enetaddr[6]; + + if (eth_getenv_enetaddr(var, enetaddr)) + return; + + printf("Warning: %s: generating 'random' MAC address\n", var); + bfin_gen_rand_mac(enetaddr); + eth_setenv_enetaddr(var, enetaddr); +#endif } +#ifndef CONFIG_BFIN_MAC +# define bfin_EMAC_initialize(x) 1 +#endif +#ifndef CONFIG_SMC911X +# define smc911x_initialize(n, x) 1 +#endif int board_eth_init(bd_t *bis) { - return bfin_EMAC_initialize(bis); + /* return ok if at least 1 eth device works */ + return bfin_EMAC_initialize(bis) & + smc911x_initialize(0, CONFIG_SMC911X_BASE); } -#endif int misc_init_r(void) { -#ifdef CONFIG_BFIN_MAC - uchar enetaddr[6]; - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) - board_init_enetaddr(enetaddr); -#endif + board_init_enetaddr("ethaddr"); + board_init_enetaddr("eth1addr"); gpio_cfi_flash_init(); diff --git a/board/cm-bf537u/cm-bf537u.c b/board/cm-bf537u/cm-bf537u.c index 4b7e864..a62ddd6 100644 --- a/board/cm-bf537u/cm-bf537u.c +++ b/board/cm-bf537u/cm-bf537u.c @@ -24,34 +24,37 @@ int checkboard(void) return 0; } -#ifdef CONFIG_BFIN_MAC -static void board_init_enetaddr(uchar *mac_addr) +static void board_init_enetaddr(char *var) { - puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); - eth_setenv_enetaddr("ethaddr", mac_addr); -} +#ifdef CONFIG_NET_MULTI + uchar enetaddr[6]; -int board_eth_init(bd_t *bis) -{ - return bfin_EMAC_initialize(bis); -} + if (eth_getenv_enetaddr(var, enetaddr)) + return; + + printf("Warning: %s: generating 'random' MAC address\n", var); + bfin_gen_rand_mac(enetaddr); + eth_setenv_enetaddr(var, enetaddr); #endif +} -#ifdef CONFIG_SMC911X +#ifndef CONFIG_BFIN_MAC +# define bfin_EMAC_initialize(x) 1 +#endif +#ifndef CONFIG_SMC911X +# define smc911x_initialize(n, x) 1 +#endif int board_eth_init(bd_t *bis) { - return smc911x_initialize(0, CONFIG_SMC911X_BASE); + /* return ok if at least 1 eth device works */ + return bfin_EMAC_initialize(bis) & + smc911x_initialize(0, CONFIG_SMC911X_BASE); } -#endif int misc_init_r(void) { -#ifdef CONFIG_BFIN_MAC - uchar enetaddr[6]; - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) - board_init_enetaddr(enetaddr); -#endif + board_init_enetaddr("ethaddr"); + board_init_enetaddr("eth1addr"); gpio_cfi_flash_init(); diff --git a/board/tcm-bf537/tcm-bf537.c b/board/tcm-bf537/tcm-bf537.c index 04d6bdb..004e0d9 100644 --- a/board/tcm-bf537/tcm-bf537.c +++ b/board/tcm-bf537/tcm-bf537.c @@ -24,27 +24,37 @@ int checkboard(void) return 0; } -#ifdef CONFIG_BFIN_MAC -static void board_init_enetaddr(uchar *mac_addr) +static void board_init_enetaddr(char *var) { - puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); - eth_setenv_enetaddr("ethaddr", mac_addr); +#ifdef CONFIG_NET_MULTI + uchar enetaddr[6]; + + if (eth_getenv_enetaddr(var, enetaddr)) + return; + + printf("Warning: %s: generating 'random' MAC address\n", var); + bfin_gen_rand_mac(enetaddr); + eth_setenv_enetaddr(var, enetaddr); +#endif } +#ifndef CONFIG_BFIN_MAC +# define bfin_EMAC_initialize(x) 1 +#endif +#ifndef CONFIG_SMC911X +# define smc911x_initialize(n, x) 1 +#endif int board_eth_init(bd_t *bis) { - return bfin_EMAC_initialize(bis); + /* return ok if at least 1 eth device works */ + return bfin_EMAC_initialize(bis) & + smc911x_initialize(0, CONFIG_SMC911X_BASE); } -#endif int misc_init_r(void) { -#ifdef CONFIG_BFIN_MAC - uchar enetaddr[6]; - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) - board_init_enetaddr(enetaddr); -#endif + board_init_enetaddr("ethaddr"); + board_init_enetaddr("eth1addr"); gpio_cfi_flash_init(); diff --git a/common/serial.c b/common/serial.c index 748e5d5..995d268 100644 --- a/common/serial.c +++ b/common/serial.c @@ -105,6 +105,9 @@ void serial_initialize (void) serial_register(&serial6_device); #endif #endif +#if defined(CONFIG_SYS_BFIN_UART) + serial_register_bfin_uart(); +#endif serial_assign (default_serial_console ()->name); } diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index c31e914..da14a4f 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -260,7 +260,6 @@ #define FLASH_START_POST_BLOCK 11 /* Should > = 11 */ #define FLASH_END_POST_BLOCK 71 /* Should < = 71 */ #endif -#define CONFIG_SYS_POST_WORD_ADDR 0xFF903FFC /* These are for board tests */ #if 0 diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 3312681..57d9b97 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -112,6 +112,10 @@ #ifndef CONFIG_BAUDRATE # define CONFIG_BAUDRATE 57600 #endif +#ifndef CONFIG_DEBUG_EARLY_SERIAL +# define CONFIG_SERIAL_MULTI +# define CONFIG_SYS_BFIN_UART +#endif /* * Debug Settings @@ -200,7 +204,8 @@ "nc=" \ "set ncip ${serverip};" \ "set stdin nc;" \ - "set stdout nc" \ + "set stdout nc;" \ + "set stderr nc" \ "\0" # else # define NETCONSOLE_ENV @@ -273,6 +278,11 @@ #endif /* + * Flash Settings + */ +#define CONFIG_FLASH_SHOW_PROGRESS 45 + +/* * SPI Settings */ #ifdef CONFIG_SPI_FLASH_ALL diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 04bca6c..9649e18 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -55,7 +55,7 @@ #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) @@ -65,6 +65,9 @@ #ifndef __ADSPBF534__ #define ADI_CMDS_NETWORK 1 #define CONFIG_BFIN_MAC +#define CONFIG_SMC911X 1 +#define CONFIG_SMC911X_BASE 0x20308000 +#define CONFIG_SMC911X_16_BIT #define CONFIG_NETCONSOLE 1 #define CONFIG_NET_MULTI 1 #endif @@ -86,6 +89,13 @@ /* + * SPI Settings + */ +#define CONFIG_BFIN_SPI +#define CONFIG_ENV_SPI_MAX_HZ 30000000 + + +/* * Env Storage Settings */ #define CONFIG_ENV_IS_IN_FLASH 1 @@ -118,6 +128,14 @@ /* + * SPI_MMC Settings + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC_SPI + + +/* * Misc Settings */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index af2fe89..84846ef 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -54,7 +54,7 @@ #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) @@ -63,11 +63,11 @@ */ #ifndef __ADSPBF534__ #define ADI_CMDS_NETWORK 1 -#define CONFIG_NET_MULTI -/* The next 3 lines are for use with SMSC on EXT-BF5xx-USB-ETH2 */ -#define CONFIG_SMC911X 1 -#define CONFIG_SMC911X_BASE 0x24000000 +#define CONFIG_SMC911X 1 +#define CONFIG_SMC911X_BASE 0x20308000 #define CONFIG_SMC911X_16_BIT +#define CONFIG_NETCONSOLE 1 +#define CONFIG_NET_MULTI 1 #endif #define CONFIG_HOSTNAME cm-bf537u /* Uncomment next line to use fixed MAC address */ @@ -87,6 +87,13 @@ /* + * SPI Settings + */ +#define CONFIG_BFIN_SPI +#define CONFIG_ENV_SPI_MAX_HZ 30000000 + + +/* * Env Storage Settings */ #define CONFIG_ENV_IS_IN_FLASH 1 @@ -119,6 +126,13 @@ /* + * SPI_MMC Settings + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC_SPI + +/* * Misc Settings */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index 9a6100e..2375fc5 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -55,17 +55,19 @@ #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* * Network Settings */ -/* TCM-BF537E has no PHY on it, but EXT-BF5xx-USB/Ethernet board has */ #ifndef __ADSPBF534__ #define ADI_CMDS_NETWORK 1 #define CONFIG_BFIN_MAC +#define CONFIG_SMC911X 1 +#define CONFIG_SMC911X_BASE 0x20308000 +#define CONFIG_SMC911X_16_BIT #define CONFIG_NETCONSOLE 1 #define CONFIG_NET_MULTI 1 #endif @@ -87,6 +89,13 @@ /* + * SPI Settings + */ +#define CONFIG_BFIN_SPI +#define CONFIG_ENV_SPI_MAX_HZ 30000000 + + +/* * Env Storage Settings */ #define CONFIG_ENV_IS_IN_FLASH 1 @@ -119,6 +128,13 @@ /* + * SPI_MMC Settings + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC_SPI + +/* * Misc Settings */ #define CONFIG_BAUDRATE 115200 diff --git a/include/serial.h b/include/serial.h index 08d106a..ff1ce99 100644 --- a/include/serial.h +++ b/include/serial.h @@ -74,6 +74,15 @@ extern struct serial_device serial_ffuart_device; extern struct serial_device serial_btuart_device; extern struct serial_device serial_stuart_device; +#if defined(CONFIG_SYS_BFIN_UART) +extern void serial_register_bfin_uart(void); +extern struct serial_device bfin_serial0_device; +extern struct serial_device bfin_serial1_device; +extern struct serial_device bfin_serial2_device; +extern struct serial_device bfin_serial3_device; +#endif + +extern void serial_register(struct serial_device *); extern void serial_initialize(void); extern void serial_stdio_init(void); extern int serial_assign(char * name); |