summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/keystone/Kconfig3
-rw-r--r--arch/arm/cpu/armv7/keystone/Makefile5
-rw-r--r--arch/arm/cpu/armv7/keystone/clock-k2l.c138
-rw-r--r--arch/arm/cpu/armv7/keystone/clock.c17
-rw-r--r--arch/arm/cpu/armv7/keystone/cmd_clock.c24
-rw-r--r--arch/arm/cpu/armv7/keystone/cmd_ddr3.c248
-rw-r--r--arch/arm/cpu/armv7/keystone/ddr3.c244
-rw-r--r--arch/arm/cpu/armv7/keystone/init.c63
-rw-r--r--arch/arm/cpu/armv7/keystone/msmc.c26
-rw-r--r--arch/arm/cpu/armv7/keystone/spl.c53
-rw-r--r--arch/arm/cpu/armv7/mx6/soc.c1
-rw-r--r--arch/arm/cpu/armv7/omap3/Kconfig2
-rw-r--r--arch/arm/cpu/armv7/socfpga/misc.c2
-rw-r--r--arch/arm/cpu/armv7/socfpga/u-boot-spl.lds9
-rw-r--r--arch/arm/imx-common/video.c3
-rw-r--r--arch/arm/include/asm/arch-am33xx/mux.h2
-rw-r--r--arch/arm/include/asm/arch-keystone/clock-k2e.h43
-rw-r--r--arch/arm/include/asm/arch-keystone/clock-k2hk.h47
-rw-r--r--arch/arm/include/asm/arch-keystone/clock-k2l.h95
-rw-r--r--arch/arm/include/asm/arch-keystone/clock.h13
-rw-r--r--arch/arm/include/asm/arch-keystone/ddr3.h6
-rw-r--r--arch/arm/include/asm/arch-keystone/emac_defs.h237
-rw-r--r--arch/arm/include/asm/arch-keystone/hardware-k2e.h23
-rw-r--r--arch/arm/include/asm/arch-keystone/hardware-k2hk.h25
-rw-r--r--arch/arm/include/asm/arch-keystone/hardware-k2l.h101
-rw-r--r--arch/arm/include/asm/arch-keystone/hardware.h98
-rw-r--r--arch/arm/include/asm/arch-keystone/msmc.h28
-rw-r--r--arch/arm/include/asm/arch-keystone/spl.h12
-rw-r--r--arch/arm/include/asm/arch-keystone/xhci-keystone.h21
-rw-r--r--arch/arm/include/asm/arch-omap3/mux.h4
-rw-r--r--arch/arm/include/asm/arch-socfpga/spl.h15
-rw-r--r--arch/arm/include/asm/imx-common/spi.h17
-rw-r--r--arch/arm/include/asm/imx-common/video.h5
-rw-r--r--arch/arm/include/asm/spl.h2
-rw-r--r--arch/arm/include/asm/ti-common/keystone_nav.h (renamed from arch/arm/include/asm/arch-keystone/keystone_nav.h)16
-rw-r--r--arch/arm/include/asm/ti-common/keystone_net.h249
-rw-r--r--arch/arm/include/asm/ti-common/keystone_serdes.h55
-rw-r--r--arch/arm/include/asm/ti-common/ti-edma3.h121
-rw-r--r--arch/arm/lib/bootm.c5
-rw-r--r--board/8dtech/eco5pk/eco5pk.h2
-rw-r--r--board/bachmann/ot1200/Kconfig5
-rw-r--r--board/bachmann/ot1200/ot1200.c10
-rw-r--r--board/boundary/nitrogen6x/nitrogen6x.c1
-rw-r--r--board/compulab/cm_fx6/common.c1
-rw-r--r--board/compulab/cm_t35/cm_t35.c19
-rw-r--r--board/embest/mx6boards/mx6boards.c1
-rw-r--r--board/freescale/mx6qsabreauto/mx6qsabreauto.c61
-rw-r--r--board/freescale/mx6slevk/mx6slevk.c1
-rw-r--r--board/gateworks/gw_ventana/gw_ventana.c1
-rw-r--r--board/genesi/mx51_efikamx/efikamx.c1
-rw-r--r--board/htkw/mcx/mcx.h2
-rw-r--r--board/logicpd/am3517evm/am3517evm.h2
-rw-r--r--board/logicpd/omap3som/omap3logic.c2
-rw-r--r--board/overo/overo.c137
-rw-r--r--board/overo/overo.h150
-rw-r--r--board/pandora/pandora.h2
-rw-r--r--board/technexion/tao3530/tao3530.h2
-rw-r--r--board/technexion/twister/twister.h2
-rw-r--r--board/teejet/mt_ventoux/mt_ventoux.h2
-rw-r--r--board/ti/am335x/mux.c4
-rw-r--r--board/ti/am3517crane/am3517crane.h2
-rw-r--r--board/ti/evm/evm.h2
-rw-r--r--board/ti/ks2_evm/Kconfig16
-rw-r--r--board/ti/ks2_evm/MAINTAINERS2
-rw-r--r--board/ti/ks2_evm/Makefile2
-rw-r--r--board/ti/ks2_evm/board.c34
-rw-r--r--board/ti/ks2_evm/board.h3
-rw-r--r--board/ti/ks2_evm/board_k2e.c79
-rw-r--r--board/ti/ks2_evm/board_k2hk.c14
-rw-r--r--board/ti/ks2_evm/board_k2l.c72
-rw-r--r--board/ti/ks2_evm/ddr3_cfg.c36
-rw-r--r--board/ti/ks2_evm/ddr3_cfg.h3
-rw-r--r--board/ti/ks2_evm/ddr3_k2hk.c16
-rw-r--r--board/ti/ks2_evm/ddr3_k2l.c38
-rw-r--r--board/ti/sdp3430/sdp.h2
-rw-r--r--board/ttcontrol/vision2/vision2.c1
-rw-r--r--common/Makefile1
-rw-r--r--configs/k2l_evm_defconfig4
-rw-r--r--drivers/Makefile2
-rw-r--r--drivers/dma/Makefile2
-rw-r--r--drivers/dma/keystone_nav.c (renamed from arch/arm/cpu/armv7/keystone/keystone_nav.c)196
-rw-r--r--drivers/dma/keystone_nav_cfg.c27
-rw-r--r--drivers/dma/ti-edma3.c384
-rw-r--r--drivers/net/keystone_net.c416
-rw-r--r--drivers/net/phy/phy.c2
-rw-r--r--drivers/soc/Makefile5
-rw-r--r--drivers/soc/keystone/Makefile1
-rw-r--r--drivers/soc/keystone/keystone_serdes.c210
-rw-r--r--drivers/spi/mxc_spi.c1
-rw-r--r--drivers/usb/host/Makefile1
-rw-r--r--drivers/usb/host/xhci-keystone.c329
-rw-r--r--include/configs/am335x_evm.h10
-rw-r--r--include/configs/am43xx_evm.h11
-rw-r--r--include/configs/k2e_evm.h11
-rw-r--r--include/configs/k2hk_evm.h7
-rw-r--r--include/configs/k2l_evm.h37
-rw-r--r--include/configs/ks2_evm.h59
-rw-r--r--include/configs/mx6sabre_common.h17
-rw-r--r--include/configs/mx6sabresd.h17
-rw-r--r--include/configs/omap3_overo.h13
-rw-r--r--include/configs/ot1200.h2
-rw-r--r--include/configs/socfpga_common.h34
-rw-r--r--include/configs/socfpga_cyclone5.h2
-rw-r--r--include/linux/usb/dwc3.h8
-rw-r--r--tools/socfpgaimage.c16
105 files changed, 3628 insertions, 1005 deletions
diff --git a/arch/arm/cpu/armv7/keystone/Kconfig b/arch/arm/cpu/armv7/keystone/Kconfig
index 8249b5e..393885f 100644
--- a/arch/arm/cpu/armv7/keystone/Kconfig
+++ b/arch/arm/cpu/armv7/keystone/Kconfig
@@ -9,6 +9,9 @@ config TARGET_K2HK_EVM
config TARGET_K2E_EVM
bool "TI Keystone 2 Edison EVM"
+config TARGET_K2L_EVM
+ bool "TI Keystone 2 Lamar EVM"
+
endchoice
config SYS_CPU
diff --git a/arch/arm/cpu/armv7/keystone/Makefile b/arch/arm/cpu/armv7/keystone/Makefile
index f8519c0..ed030db 100644
--- a/arch/arm/cpu/armv7/keystone/Makefile
+++ b/arch/arm/cpu/armv7/keystone/Makefile
@@ -10,10 +10,9 @@ obj-y += psc.o
obj-y += clock.o
obj-$(CONFIG_SOC_K2HK) += clock-k2hk.o
obj-$(CONFIG_SOC_K2E) += clock-k2e.o
+obj-$(CONFIG_SOC_K2L) += clock-k2l.o
obj-y += cmd_clock.o
obj-y += cmd_mon.o
-obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_nav.o
obj-y += msmc.o
-obj-$(CONFIG_SPL_BUILD) += spl.o
-obj-y += ddr3.o
+obj-y += ddr3.o cmd_ddr3.o
obj-y += keystone.o
diff --git a/arch/arm/cpu/armv7/keystone/clock-k2l.c b/arch/arm/cpu/armv7/keystone/clock-k2l.c
new file mode 100644
index 0000000..1c5e4d5
--- /dev/null
+++ b/arch/arm/cpu/armv7/keystone/clock-k2l.c
@@ -0,0 +1,138 @@
+/*
+ * Keystone2: get clk rate for K2L
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clock_defs.h>
+
+const struct keystone_pll_regs keystone_pll_regs[] = {
+ [CORE_PLL] = {KS2_MAINPLLCTL0, KS2_MAINPLLCTL1},
+ [PASS_PLL] = {KS2_PASSPLLCTL0, KS2_PASSPLLCTL1},
+ [TETRIS_PLL] = {KS2_ARMPLLCTL0, KS2_ARMPLLCTL1},
+ [DDR3_PLL] = {KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1},
+};
+
+int dev_speeds[] = {
+ SPD800,
+ SPD1000,
+ SPD1200,
+ SPD800,
+ SPD800,
+ SPD800,
+ SPD800,
+ SPD800,
+ SPD1200,
+ SPD1000,
+ SPD800,
+ SPD800,
+ SPD800,
+};
+
+int arm_speeds[] = {
+ SPD800,
+ SPD1000,
+ SPD1200,
+ SPD1350,
+ SPD1400,
+ SPD800,
+ SPD1400,
+ SPD1350,
+ SPD1200,
+ SPD1000,
+ SPD800,
+ SPD800,
+ SPD800,
+};
+
+/**
+ * pll_freq_get - get pll frequency
+ * Fout = Fref * NF(mult) / NR(prediv) / OD
+ * @pll: pll identifier
+ */
+static unsigned long pll_freq_get(int pll)
+{
+ unsigned long mult = 1, prediv = 1, output_div = 2;
+ unsigned long ret;
+ u32 tmp, reg;
+
+ if (pll == CORE_PLL) {
+ ret = external_clk[sys_clk];
+ if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) {
+ /* PLL mode */
+ tmp = __raw_readl(KS2_MAINPLLCTL0);
+ prediv = (tmp & PLL_DIV_MASK) + 1;
+ mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) |
+ (pllctl_reg_read(pll, mult) &
+ PLLM_MULT_LO_MASK)) + 1;
+ output_div = ((pllctl_reg_read(pll, secctl) >>
+ PLL_CLKOD_SHIFT) & PLL_CLKOD_MASK) + 1;
+
+ ret = ret / prediv / output_div * mult;
+ }
+ } else {
+ switch (pll) {
+ case PASS_PLL:
+ ret = external_clk[pa_clk];
+ reg = KS2_PASSPLLCTL0;
+ break;
+ case TETRIS_PLL:
+ ret = external_clk[tetris_clk];
+ reg = KS2_ARMPLLCTL0;
+ break;
+ case DDR3_PLL:
+ ret = external_clk[ddr3_clk];
+ reg = KS2_DDR3APLLCTL0;
+ break;
+ default:
+ return 0;
+ }
+
+ tmp = __raw_readl(reg);
+ if (!(tmp & PLLCTL_BYPASS)) {
+ /* Bypass disabled */
+ prediv = (tmp & PLL_DIV_MASK) + 1;
+ mult = ((tmp >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1;
+ output_div = ((tmp >> PLL_CLKOD_SHIFT) &
+ PLL_CLKOD_MASK) + 1;
+ ret = ((ret / prediv) * mult) / output_div;
+ }
+ }
+
+ return ret;
+}
+
+unsigned long clk_get_rate(unsigned int clk)
+{
+ switch (clk) {
+ case core_pll_clk: return pll_freq_get(CORE_PLL);
+ case pass_pll_clk: return pll_freq_get(PASS_PLL);
+ case tetris_pll_clk: return pll_freq_get(TETRIS_PLL);
+ case ddr3_pll_clk: return pll_freq_get(DDR3_PLL);
+ case sys_clk0_1_clk:
+ case sys_clk0_clk: return pll_freq_get(CORE_PLL) / pll0div_read(1);
+ case sys_clk1_clk: return pll_freq_get(CORE_PLL) / pll0div_read(2);
+ case sys_clk2_clk: return pll_freq_get(CORE_PLL) / pll0div_read(3);
+ case sys_clk3_clk: return pll_freq_get(CORE_PLL) / pll0div_read(4);
+ case sys_clk0_2_clk: return clk_get_rate(sys_clk0_clk) / 2;
+ case sys_clk0_3_clk: return clk_get_rate(sys_clk0_clk) / 3;
+ case sys_clk0_4_clk: return clk_get_rate(sys_clk0_clk) / 4;
+ case sys_clk0_6_clk: return clk_get_rate(sys_clk0_clk) / 6;
+ case sys_clk0_8_clk: return clk_get_rate(sys_clk0_clk) / 8;
+ case sys_clk0_12_clk: return clk_get_rate(sys_clk0_clk) / 12;
+ case sys_clk0_24_clk: return clk_get_rate(sys_clk0_clk) / 24;
+ case sys_clk1_3_clk: return clk_get_rate(sys_clk1_clk) / 3;
+ case sys_clk1_4_clk: return clk_get_rate(sys_clk1_clk) / 4;
+ case sys_clk1_6_clk: return clk_get_rate(sys_clk1_clk) / 6;
+ case sys_clk1_12_clk: return clk_get_rate(sys_clk1_clk) / 12;
+ default:
+ break;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c
index 47fc893..d13fbc1 100644
--- a/arch/arm/cpu/armv7/keystone/clock.c
+++ b/arch/arm/cpu/armv7/keystone/clock.c
@@ -185,10 +185,6 @@ void init_pll(const struct pll_init_data *data)
tmp &= ~(PLL_BWADJ_HI_MASK);
tmp |= ((bwadj >> 8) & PLL_BWADJ_HI_MASK);
- /* set PLL Select (bit 13) for PASS PLL */
- if (data->pll == PASS_PLL)
- tmp |= PLLCTL_PAPLL;
-
__raw_writel(tmp, keystone_pll_regs[data->pll].reg1);
/* Reset bit: bit 14 for both DDR3 & PASS PLL */
@@ -261,3 +257,16 @@ inline int get_max_arm_speed(void)
return get_max_speed((read_efuse_bootrom() >> 16) & 0xffff, arm_speeds);
}
#endif
+
+void pass_pll_pa_clk_enable(void)
+{
+ u32 reg;
+
+ reg = readl(keystone_pll_regs[PASS_PLL].reg1);
+
+ reg |= PLLCTL_PAPLL;
+ writel(reg, keystone_pll_regs[PASS_PLL].reg1);
+
+ /* wait till clock is enabled */
+ sdelay(15000);
+}
diff --git a/arch/arm/cpu/armv7/keystone/cmd_clock.c b/arch/arm/cpu/armv7/keystone/cmd_clock.c
index d97c95b..af1b701 100644
--- a/arch/arm/cpu/armv7/keystone/cmd_clock.c
+++ b/arch/arm/cpu/armv7/keystone/cmd_clock.c
@@ -58,20 +58,11 @@ pll_cmd_usage:
return cmd_usage(cmdtp);
}
-#ifdef CONFIG_SOC_K2HK
-U_BOOT_CMD(
- pllset, 5, 0, do_pll_cmd,
- "set pll multiplier and pre divider",
- "<pa|arm|ddr3a|ddr3b> <mult> <div> <OD>\n"
-);
-#endif
-#ifdef CONFIG_SOC_K2E
U_BOOT_CMD(
pllset, 5, 0, do_pll_cmd,
"set pll multiplier and pre divider",
- "<pa|ddr3> <mult> <div> <OD>\n"
+ PLLSET_CMD_LIST " <mult> <div> <OD>\n"
);
-#endif
int do_getclk_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
@@ -95,12 +86,8 @@ U_BOOT_CMD(
getclk, 2, 0, do_getclk_cmd,
"get clock rate",
"<clk index>\n"
-#ifdef CONFIG_SOC_K2HK
- "See the 'enum clk_e' in the clock-k2hk.h for clk indexes\n"
-#endif
-#ifdef CONFIG_SOC_K2E
- "See the 'enum clk_e' in the clock-k2e.h for clk indexes\n"
-#endif
+ "The indexes for clocks:\n"
+ CLOCK_INDEXES_LIST
);
int do_psc_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
@@ -141,5 +128,8 @@ U_BOOT_CMD(
psc, 3, 0, do_psc_cmd,
"<enable/disable psc module os disable domain>",
"<mod/domain index> <en|di|domain>\n"
- "See the hardware.h for Power and Sleep Controller (PSC) Domains\n"
+ "Intended to control Power and Sleep Controller (PSC) domains and\n"
+ "modules. The module or domain index exectly corresponds to ones\n"
+ "listed in official TRM. For instance, to enable MSMC RAM clock\n"
+ "domain use command: psc 14 en.\n"
);
diff --git a/arch/arm/cpu/armv7/keystone/cmd_ddr3.c b/arch/arm/cpu/armv7/keystone/cmd_ddr3.c
new file mode 100644
index 0000000..ea78ad8
--- /dev/null
+++ b/arch/arm/cpu/armv7/keystone/cmd_ddr3.c
@@ -0,0 +1,248 @@
+/*
+ * Keystone2: DDR3 test commands
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/ddr3.h>
+#include <common.h>
+#include <command.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DDR_MIN_ADDR CONFIG_SYS_SDRAM_BASE
+
+#define DDR_REMAP_ADDR 0x80000000
+#define ECC_START_ADDR1 ((DDR_MIN_ADDR - DDR_REMAP_ADDR) >> 17)
+
+#define ECC_END_ADDR1 (((gd->start_addr_sp - DDR_REMAP_ADDR - \
+ CONFIG_STACKSIZE) >> 17) - 2)
+
+#define DDR_TEST_BURST_SIZE 1024
+
+static int ddr_memory_test(u32 start_address, u32 end_address, int quick)
+{
+ u32 index_start, value, index;
+
+ index_start = start_address;
+
+ while (1) {
+ /* Write a pattern */
+ for (index = index_start;
+ index < index_start + DDR_TEST_BURST_SIZE;
+ index += 4)
+ __raw_writel(index, index);
+
+ /* Read and check the pattern */
+ for (index = index_start;
+ index < index_start + DDR_TEST_BURST_SIZE;
+ index += 4) {
+ value = __raw_readl(index);
+ if (value != index) {
+ printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
+ index, value, __raw_readl(index));
+
+ return -1;
+ }
+ }
+
+ index_start += DDR_TEST_BURST_SIZE;
+ if (index_start >= end_address)
+ break;
+
+ if (quick)
+ continue;
+
+ /* Write a pattern for complementary values */
+ for (index = index_start;
+ index < index_start + DDR_TEST_BURST_SIZE;
+ index += 4)
+ __raw_writel((u32)~index, index);
+
+ /* Read and check the pattern */
+ for (index = index_start;
+ index < index_start + DDR_TEST_BURST_SIZE;
+ index += 4) {
+ value = __raw_readl(index);
+ if (value != ~index) {
+ printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
+ index, value, __raw_readl(index));
+
+ return -1;
+ }
+ }
+
+ index_start += DDR_TEST_BURST_SIZE;
+ if (index_start >= end_address)
+ break;
+
+ /* Write a pattern */
+ for (index = index_start;
+ index < index_start + DDR_TEST_BURST_SIZE;
+ index += 2)
+ __raw_writew((u16)index, index);
+
+ /* Read and check the pattern */
+ for (index = index_start;
+ index < index_start + DDR_TEST_BURST_SIZE;
+ index += 2) {
+ value = __raw_readw(index);
+ if (value != (u16)index) {
+ printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
+ index, value, __raw_readw(index));
+
+ return -1;
+ }
+ }
+
+ index_start += DDR_TEST_BURST_SIZE;
+ if (index_start >= end_address)
+ break;
+
+ /* Write a pattern */
+ for (index = index_start;
+ index < index_start + DDR_TEST_BURST_SIZE;
+ index += 1)
+ __raw_writeb((u8)index, index);
+
+ /* Read and check the pattern */
+ for (index = index_start;
+ index < index_start + DDR_TEST_BURST_SIZE;
+ index += 1) {
+ value = __raw_readb(index);
+ if (value != (u8)index) {
+ printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
+ index, value, __raw_readb(index));
+
+ return -1;
+ }
+ }
+
+ index_start += DDR_TEST_BURST_SIZE;
+ if (index_start >= end_address)
+ break;
+ }
+
+ puts("ddr memory test PASSED!\n");
+ return 0;
+}
+
+static int ddr_memory_compare(u32 address1, u32 address2, u32 size)
+{
+ u32 index, value, index2, value2;
+
+ for (index = address1, index2 = address2;
+ index < address1 + size;
+ index += 4, index2 += 4) {
+ value = __raw_readl(index);
+ value2 = __raw_readl(index2);
+
+ if (value != value2) {
+ printf("ddr_memory_test: Compare failed at address = 0x%x value = 0x%x, address2 = 0x%x value2 = 0x%x\n",
+ index, value, index2, value2);
+
+ return -1;
+ }
+ }
+
+ puts("ddr memory compare PASSED!\n");
+ return 0;
+}
+
+static int ddr_memory_ecc_err(u32 base, u32 address, u32 ecc_err)
+{
+ u32 value1, value2, value3;
+
+ puts("Disabling DDR ECC ...\n");
+ ddr3_disable_ecc(base);
+
+ value1 = __raw_readl(address);
+ value2 = value1 ^ ecc_err;
+ __raw_writel(value2, address);
+
+ value3 = __raw_readl(address);
+ printf("ECC err test, addr 0x%x, read data 0x%x, wrote data 0x%x, err pattern: 0x%x, read after write data 0x%x\n",
+ address, value1, value2, ecc_err, value3);
+
+ __raw_writel(ECC_START_ADDR1 | (ECC_END_ADDR1 << 16),
+ base + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET);
+
+ puts("Enabling DDR ECC ...\n");
+ ddr3_enable_ecc(base, 1);
+
+ value1 = __raw_readl(address);
+ printf("ECC err test, addr 0x%x, read data 0x%x\n", address, value1);
+
+ ddr3_check_ecc_int(base);
+ return 0;
+}
+
+static int do_ddr_test(cmd_tbl_t *cmdtp,
+ int flag, int argc, char * const argv[])
+{
+ u32 start_addr, end_addr, size, ecc_err;
+
+ if ((argc == 4) && (strncmp(argv[1], "ecc_err", 8) == 0)) {
+ if (!ddr3_ecc_support_rmw(KS2_DDR3A_EMIF_CTRL_BASE)) {
+ puts("ECC RMW isn't supported for this SOC\n");
+ return 1;
+ }
+
+ start_addr = simple_strtoul(argv[2], NULL, 16);
+ ecc_err = simple_strtoul(argv[3], NULL, 16);
+
+ if ((start_addr < CONFIG_SYS_SDRAM_BASE) ||
+ (start_addr > (CONFIG_SYS_SDRAM_BASE +
+ CONFIG_MAX_RAM_BANK_SIZE - 1))) {
+ puts("Invalid address!\n");
+ return cmd_usage(cmdtp);
+ }
+
+ ddr_memory_ecc_err(KS2_DDR3A_EMIF_CTRL_BASE,
+ start_addr, ecc_err);
+ return 0;
+ }
+
+ if (!(((argc == 4) && (strncmp(argv[1], "test", 5) == 0)) ||
+ ((argc == 5) && (strncmp(argv[1], "compare", 8) == 0))))
+ return cmd_usage(cmdtp);
+
+ start_addr = simple_strtoul(argv[2], NULL, 16);
+ end_addr = simple_strtoul(argv[3], NULL, 16);
+
+ if ((start_addr < CONFIG_SYS_SDRAM_BASE) ||
+ (start_addr > (CONFIG_SYS_SDRAM_BASE +
+ CONFIG_MAX_RAM_BANK_SIZE - 1)) ||
+ (end_addr < CONFIG_SYS_SDRAM_BASE) ||
+ (end_addr > (CONFIG_SYS_SDRAM_BASE +
+ CONFIG_MAX_RAM_BANK_SIZE - 1)) || (start_addr >= end_addr)) {
+ puts("Invalid start or end address!\n");
+ return cmd_usage(cmdtp);
+ }
+
+ puts("Please wait ...\n");
+ if (argc == 5) {
+ size = simple_strtoul(argv[4], NULL, 16);
+ ddr_memory_compare(start_addr, end_addr, size);
+ } else {
+ ddr_memory_test(start_addr, end_addr, 0);
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(ddr, 5, 1, do_ddr_test,
+ "DDR3 test",
+ "test <start_addr in hex> <end_addr in hex> - test DDR from start\n"
+ " address to end address\n"
+ "ddr compare <start_addr in hex> <end_addr in hex> <size in hex> -\n"
+ " compare DDR data of (size) bytes from start address to end\n"
+ " address\n"
+ "ddr ecc_err <addr in hex> <bit_err in hex> - generate bit errors\n"
+ " in DDR data at <addr>, the command will read a 32-bit data\n"
+ " from <addr>, and write (data ^ bit_err) back to <addr>\n"
+);
diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/cpu/armv7/keystone/ddr3.c
index 2eabec1..923906a 100644
--- a/arch/arm/cpu/armv7/keystone/ddr3.c
+++ b/arch/arm/cpu/armv7/keystone/ddr3.c
@@ -9,9 +9,19 @@
#include <asm/io.h>
#include <common.h>
+#include <asm/arch/msmc.h>
#include <asm/arch/ddr3.h>
#include <asm/arch/psc_defs.h>
+#include <asm/ti-common/ti-edma3.h>
+
+#define DDR3_EDMA_BLK_SIZE_SHIFT 10
+#define DDR3_EDMA_BLK_SIZE (1 << DDR3_EDMA_BLK_SIZE_SHIFT)
+#define DDR3_EDMA_BCNT 0x8000
+#define DDR3_EDMA_CCNT 1
+#define DDR3_EDMA_XF_SIZE (DDR3_EDMA_BLK_SIZE * DDR3_EDMA_BCNT)
+#define DDR3_EDMA_SLOT_NUM 1
+
void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg)
{
unsigned int tmp;
@@ -70,6 +80,240 @@ void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg)
__raw_writel(emif_cfg->sdrfc, base + KS2_DDR3_SDRFC_OFFSET);
}
+int ddr3_ecc_support_rmw(u32 base)
+{
+ u32 value = __raw_readl(base + KS2_DDR3_MIDR_OFFSET);
+
+ /* Check the DDR3 controller ID reg if the controllers
+ supports ECC RMW or not */
+ if (value == 0x40461C02)
+ return 1;
+
+ return 0;
+}
+
+static void ddr3_ecc_config(u32 base, u32 value)
+{
+ u32 data;
+
+ __raw_writel(value, base + KS2_DDR3_ECC_CTRL_OFFSET);
+ udelay(100000); /* delay required to synchronize across clock domains */
+
+ if (value & KS2_DDR3_ECC_EN) {
+ /* Clear the 1-bit error count */
+ data = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET);
+ __raw_writel(data, base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET);
+
+ /* enable the ECC interrupt */
+ __raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS |
+ KS2_DDR3_WR_ECC_ERR_SYS,
+ base + KS2_DDR3_ECC_INT_ENABLE_SET_SYS_OFFSET);
+
+ /* Clear the ECC error interrupt status */
+ __raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS |
+ KS2_DDR3_WR_ECC_ERR_SYS,
+ base + KS2_DDR3_ECC_INT_STATUS_OFFSET);
+ }
+}
+
+static void ddr3_reset_data(u32 base, u32 ddr3_size)
+{
+ u32 mpax[2];
+ u32 seg_num;
+ u32 seg, blks, dst, edma_blks;
+ struct edma3_slot_config slot;
+ struct edma3_channel_config edma_channel;
+ u32 edma_src[DDR3_EDMA_BLK_SIZE/4] __aligned(16) = {0, };
+
+ /* Setup an edma to copy the 1k block to the entire DDR */
+ puts("\nClear entire DDR3 memory to enable ECC\n");
+
+ /* save the SES MPAX regs */
+ msmc_get_ses_mpax(8, 0, mpax);
+
+ /* setup edma slot 1 configuration */
+ slot.opt = EDMA3_SLOPT_TRANS_COMP_INT_ENB |
+ EDMA3_SLOPT_COMP_CODE(0) |
+ EDMA3_SLOPT_STATIC | EDMA3_SLOPT_AB_SYNC;
+ slot.bcnt = DDR3_EDMA_BCNT;
+ slot.acnt = DDR3_EDMA_BLK_SIZE;
+ slot.ccnt = DDR3_EDMA_CCNT;
+ slot.src_bidx = 0;
+ slot.dst_bidx = DDR3_EDMA_BLK_SIZE;
+ slot.src_cidx = 0;
+ slot.dst_cidx = 0;
+ slot.link = EDMA3_PARSET_NULL_LINK;
+ slot.bcntrld = 0;
+ edma3_slot_configure(KS2_EDMA0_BASE, DDR3_EDMA_SLOT_NUM, &slot);
+
+ /* configure quik edma channel */
+ edma_channel.slot = DDR3_EDMA_SLOT_NUM;
+ edma_channel.chnum = 0;
+ edma_channel.complete_code = 0;
+ /* event trigger after dst update */
+ edma_channel.trigger_slot_word = EDMA3_TWORD(dst);
+ qedma3_start(KS2_EDMA0_BASE, &edma_channel);
+
+ /* DDR3 size in segments (4KB seg size) */
+ seg_num = ddr3_size << (30 - KS2_MSMC_SEG_SIZE_SHIFT);
+
+ for (seg = 0; seg < seg_num; seg += KS2_MSMC_MAP_SEG_NUM) {
+ /* map 2GB 36-bit DDR address to 32-bit DDR address in EMIF
+ access slave interface so that edma driver can access */
+ msmc_map_ses_segment(8, 0, base >> KS2_MSMC_SEG_SIZE_SHIFT,
+ KS2_MSMC_DST_SEG_BASE + seg, MPAX_SEG_2G);
+
+ if ((seg_num - seg) > KS2_MSMC_MAP_SEG_NUM)
+ edma_blks = KS2_MSMC_MAP_SEG_NUM <<
+ (KS2_MSMC_SEG_SIZE_SHIFT
+ - DDR3_EDMA_BLK_SIZE_SHIFT);
+ else
+ edma_blks = (seg_num - seg) << (KS2_MSMC_SEG_SIZE_SHIFT
+ - DDR3_EDMA_BLK_SIZE_SHIFT);
+
+ /* Use edma driver to scrub 2GB DDR memory */
+ for (dst = base, blks = 0; blks < edma_blks;
+ blks += DDR3_EDMA_BCNT, dst += DDR3_EDMA_XF_SIZE) {
+ edma3_set_src_addr(KS2_EDMA0_BASE,
+ edma_channel.slot, (u32)edma_src);
+ edma3_set_dest_addr(KS2_EDMA0_BASE,
+ edma_channel.slot, (u32)dst);
+
+ while (edma3_check_for_transfer(KS2_EDMA0_BASE,
+ &edma_channel))
+ udelay(10);
+ }
+ }
+
+ qedma3_stop(KS2_EDMA0_BASE, &edma_channel);
+
+ /* restore the SES MPAX regs */
+ msmc_set_ses_mpax(8, 0, mpax);
+}
+
+static void ddr3_ecc_init_range(u32 base)
+{
+ u32 ecc_val = KS2_DDR3_ECC_EN;
+ u32 rmw = ddr3_ecc_support_rmw(base);
+
+ if (rmw)
+ ecc_val |= KS2_DDR3_ECC_RMW_EN;
+
+ __raw_writel(0, base + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET);
+
+ ddr3_ecc_config(base, ecc_val);
+}
+
+void ddr3_enable_ecc(u32 base, int test)
+{
+ u32 ecc_val = KS2_DDR3_ECC_ENABLE;
+ u32 rmw = ddr3_ecc_support_rmw(base);
+
+ if (test)
+ ecc_val |= KS2_DDR3_ECC_ADDR_RNG_1_EN;
+
+ if (!rmw) {
+ if (!test)
+ /* by default, disable ecc when rmw = 0 and no
+ ecc test */
+ ecc_val = 0;
+ } else {
+ ecc_val |= KS2_DDR3_ECC_RMW_EN;
+ }
+
+ ddr3_ecc_config(base, ecc_val);
+}
+
+void ddr3_disable_ecc(u32 base)
+{
+ ddr3_ecc_config(base, 0);
+}
+
+#if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L)
+static void cic_init(u32 base)
+{
+ /* Disable CIC global interrupts */
+ __raw_writel(0, base + KS2_CIC_GLOBAL_ENABLE);
+
+ /* Set to normal mode, no nesting, no priority hold */
+ __raw_writel(0, base + KS2_CIC_CTRL);
+ __raw_writel(0, base + KS2_CIC_HOST_CTRL);
+
+ /* Enable CIC global interrupts */
+ __raw_writel(1, base + KS2_CIC_GLOBAL_ENABLE);
+}
+
+static void cic_map_cic_to_gic(u32 base, u32 chan_num, u32 irq_num)
+{
+ /* Map the system interrupt to a CIC channel */
+ __raw_writeb(chan_num, base + KS2_CIC_CHAN_MAP(0) + irq_num);
+
+ /* Enable CIC system interrupt */
+ __raw_writel(irq_num, base + KS2_CIC_SYS_ENABLE_IDX_SET);
+
+ /* Enable CIC Host interrupt */
+ __raw_writel(chan_num, base + KS2_CIC_HOST_ENABLE_IDX_SET);
+}
+
+static void ddr3_map_ecc_cic2_irq(u32 base)
+{
+ cic_init(base);
+ cic_map_cic_to_gic(base, KS2_CIC2_DDR3_ECC_CHAN_NUM,
+ KS2_CIC2_DDR3_ECC_IRQ_NUM);
+}
+#endif
+
+void ddr3_init_ecc(u32 base)
+{
+ u32 ddr3_size;
+
+ if (!ddr3_ecc_support_rmw(base)) {
+ ddr3_disable_ecc(base);
+ return;
+ }
+
+ ddr3_ecc_init_range(base);
+ ddr3_size = ddr3_get_size();
+ ddr3_reset_data(CONFIG_SYS_SDRAM_BASE, ddr3_size);
+
+ /* mapping DDR3 ECC system interrupt from CIC2 to GIC */
+#if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L)
+ ddr3_map_ecc_cic2_irq(KS2_CIC2_BASE);
+#endif
+ ddr3_enable_ecc(base, 0);
+}
+
+void ddr3_check_ecc_int(u32 base)
+{
+ char *env;
+ int ecc_test = 0;
+ u32 value = __raw_readl(base + KS2_DDR3_ECC_INT_STATUS_OFFSET);
+
+ env = getenv("ecc_test");
+ if (env)
+ ecc_test = simple_strtol(env, NULL, 0);
+
+ if (value & KS2_DDR3_WR_ECC_ERR_SYS)
+ puts("DDR3 ECC write error interrupted\n");
+
+ if (value & KS2_DDR3_2B_ECC_ERR_SYS) {
+ puts("DDR3 ECC 2-bit error interrupted\n");
+
+ if (!ecc_test) {
+ puts("Reseting the device ...\n");
+ reset_cpu(0);
+ }
+ }
+
+ value = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET);
+ if (value) {
+ printf("1-bit ECC err count: 0x%x\n", value);
+ value = __raw_readl(base +
+ KS2_DDR3_ONE_BIT_ECC_ERR_ADDR_LOG_OFFSET);
+ printf("1-bit ECC err address log: 0x%x\n", value);
+ }
+}
+
void ddr3_reset_ddrphy(void)
{
u32 tmp;
diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c
index a8f8aee..c2b9478 100644
--- a/arch/arm/cpu/armv7/keystone/init.c
+++ b/arch/arm/cpu/armv7/keystone/init.c
@@ -13,6 +13,7 @@
#include <asm/arch/msmc.h>
#include <asm/arch/clock.h>
#include <asm/arch/hardware.h>
+#include <asm/arch/psc_defs.h>
void chip_configuration_unlock(void)
{
@@ -20,17 +21,67 @@ void chip_configuration_unlock(void)
__raw_writel(KS2_KICK1_MAGIC, KS2_KICK1);
}
+#ifdef CONFIG_SOC_K2L
+void osr_init(void)
+{
+ u32 i;
+ u32 j;
+ u32 val;
+ u32 base = KS2_OSR_CFG_BASE;
+ u32 ecc_ctrl[KS2_OSR_NUM_RAM_BANKS];
+
+ /* Enable the OSR clock domain */
+ psc_enable_module(KS2_LPSC_OSR);
+
+ /* Disable OSR ECC check for all the ram banks */
+ for (i = 0; i < KS2_OSR_NUM_RAM_BANKS; i++) {
+ val = i | KS2_OSR_ECC_VEC_TRIG_RD |
+ (KS2_OSR_ECC_CTRL << KS2_OSR_ECC_VEC_RD_ADDR_SH);
+
+ writel(val , base + KS2_OSR_ECC_VEC);
+
+ /**
+ * wait till read is done.
+ * Print should be added after earlyprintk support is added.
+ */
+ for (j = 0; j < 10000; j++) {
+ val = readl(base + KS2_OSR_ECC_VEC);
+ if (val & KS2_OSR_ECC_VEC_RD_DONE)
+ break;
+ }
+
+ ecc_ctrl[i] = readl(base + KS2_OSR_ECC_CTRL) ^
+ KS2_OSR_ECC_CTRL_CHK;
+
+ writel(ecc_ctrl[i], KS2_MSMC_DATA_BASE + i * 4);
+ writel(ecc_ctrl[i], base + KS2_OSR_ECC_CTRL);
+ }
+
+ /* Reset OSR memory to all zeros */
+ for (i = 0; i < KS2_OSR_SIZE; i += 4)
+ writel(0, KS2_OSR_DATA_BASE + i);
+
+ /* Enable OSR ECC check for all the ram banks */
+ for (i = 0; i < KS2_OSR_NUM_RAM_BANKS; i++)
+ writel(ecc_ctrl[i] |
+ KS2_OSR_ECC_CTRL_CHK, base + KS2_OSR_ECC_CTRL);
+}
+#endif
+
int arch_cpu_init(void)
{
chip_configuration_unlock();
icache_enable();
- msmc_share_all_segments(8); /* TETRIS */
- msmc_share_all_segments(9); /* NETCP */
- msmc_share_all_segments(10); /* QM PDSP */
- msmc_share_all_segments(11); /* PCIE 0 */
-#ifdef CONFIG_SOC_K2E
- msmc_share_all_segments(13); /* PCIE 1 */
+ msmc_share_all_segments(KS2_MSMC_SEGMENT_TETRIS);
+ msmc_share_all_segments(KS2_MSMC_SEGMENT_NETCP);
+ msmc_share_all_segments(KS2_MSMC_SEGMENT_QM_PDSP);
+ msmc_share_all_segments(KS2_MSMC_SEGMENT_PCIE0);
+#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L)
+ msmc_share_all_segments(KS2_MSMC_SEGMENT_PCIE1);
+#endif
+#ifdef CONFIG_SOC_K2L
+ osr_init();
#endif
/*
diff --git a/arch/arm/cpu/armv7/keystone/msmc.c b/arch/arm/cpu/armv7/keystone/msmc.c
index 7d8e597..7899141 100644
--- a/arch/arm/cpu/armv7/keystone/msmc.c
+++ b/arch/arm/cpu/armv7/keystone/msmc.c
@@ -66,3 +66,29 @@ void msmc_share_all_segments(int priv_id)
msmc->ses[priv_id][j].mpaxh &= 0xffffff7ful;
}
}
+
+void msmc_map_ses_segment(int priv_id, int ses_pair,
+ u32 src_pfn, u32 dst_pfn, enum mpax_seg_size size)
+{
+ struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE;
+
+ msmc->ses[priv_id][ses_pair].mpaxh = src_pfn << 12 |
+ (size & 0x1f) | 0x80;
+ msmc->ses[priv_id][ses_pair].mpaxl = dst_pfn << 8 | 0x3f;
+}
+
+void msmc_get_ses_mpax(int priv_id, int ses_pair, u32 *mpax)
+{
+ struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE;
+
+ *mpax++ = msmc->ses[priv_id][ses_pair].mpaxl;
+ *mpax = msmc->ses[priv_id][ses_pair].mpaxh;
+}
+
+void msmc_set_ses_mpax(int priv_id, int ses_pair, u32 *mpax)
+{
+ struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE;
+
+ msmc->ses[priv_id][ses_pair].mpaxl = *mpax++;
+ msmc->ses[priv_id][ses_pair].mpaxh = *mpax;
+}
diff --git a/arch/arm/cpu/armv7/keystone/spl.c b/arch/arm/cpu/armv7/keystone/spl.c
deleted file mode 100644
index d4b0e9b..0000000
--- a/arch/arm/cpu/armv7/keystone/spl.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * common spl init code
- *
- * (C) Copyright 2012-2014
- * Texas Instruments Incorporated, <www.ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <config.h>
-#include <ns16550.h>
-#include <malloc.h>
-#include <spl.h>
-#include <spi_flash.h>
-
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_K2HK_EVM
-static struct pll_init_data spl_pll_config[] = {
- CORE_PLL_799,
- TETRIS_PLL_500,
-};
-#endif
-
-#ifdef CONFIG_K2E_EVM
-static struct pll_init_data spl_pll_config[] = {
- CORE_PLL_800,
-};
-#endif
-
-void spl_init_keystone_plls(void)
-{
- init_plls(ARRAY_SIZE(spl_pll_config), spl_pll_config);
-}
-
-void spl_board_init(void)
-{
- spl_init_keystone_plls();
- preloader_console_init();
-}
-
-u32 spl_boot_device(void)
-{
-#if defined(CONFIG_SPL_SPI_LOAD)
- return BOOT_DEVICE_SPI;
-#else
- puts("Unknown boot device\n");
- hang();
-#endif
-}
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index a202b03..dd5aaa2 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -21,6 +21,7 @@
#include <stdbool.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/crm_regs.h>
+#include <asm/bootm.h>
enum ldo_reg {
LDO_ARM,
diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig
index 6fae1e5..4a48f84 100644
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -16,7 +16,7 @@ config TARGET_OMAP3_BEAGLE
bool "TI OMAP3 BeagleBoard"
config TARGET_CM_T35
- bool "CompuLab CM-T35"
+ bool "CompuLab CM-T3530 and CM-T3730 boards"
config TARGET_DEVKIT8000
bool "TimLL OMAP3 Devkit8000"
diff --git a/arch/arm/cpu/armv7/socfpga/misc.c b/arch/arm/cpu/armv7/socfpga/misc.c
index 0eab264..8c3e5f7 100644
--- a/arch/arm/cpu/armv7/socfpga/misc.c
+++ b/arch/arm/cpu/armv7/socfpga/misc.c
@@ -176,7 +176,7 @@ static void socfpga_nic301_slave_ns(void)
static uint32_t iswgrp_handoff[8];
-int misc_init_r(void)
+int arch_early_init_r(void)
{
int i;
for (i = 0; i < 8; i++) /* Cache initial SW setting regs */
diff --git a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
index db9bdad..569fa41 100644
--- a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
@@ -42,13 +42,4 @@ SECTIONS
. = ALIGN(4);
__bss_end = .;
} >.sdram
-
- . = ALIGN(8);
- __malloc_start = .;
- . = . + CONFIG_SPL_MALLOC_SIZE;
- __malloc_end = .;
-
- . = . + CONFIG_SPL_STACK_SIZE;
- . = ALIGN(8);
- __stack_start = .;
}
diff --git a/arch/arm/imx-common/video.c b/arch/arm/imx-common/video.c
index 0121cd7..8651b80 100644
--- a/arch/arm/imx-common/video.c
+++ b/arch/arm/imx-common/video.c
@@ -6,9 +6,6 @@
#include <asm/errno.h>
#include <asm/imx-common/video.h>
-extern struct display_info_t const displays[];
-extern size_t display_count;
-
int board_video_skip(void)
{
int i;
diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h
index 3249437..d8bf872 100644
--- a/arch/arm/include/asm/arch-am33xx/mux.h
+++ b/arch/arm/include/asm/arch-am33xx/mux.h
@@ -36,7 +36,7 @@ struct module_pin_mux {
/* Pad control register offset */
#define PAD_CTRL_BASE 0x800
-#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \
+#define OFFSET(x) (unsigned int) (&((struct pad_signals *)\
(PAD_CTRL_BASE))->x)
/*
diff --git a/arch/arm/include/asm/arch-keystone/clock-k2e.h b/arch/arm/include/asm/arch-keystone/clock-k2e.h
index df33a78..d013b83 100644
--- a/arch/arm/include/asm/arch-keystone/clock-k2e.h
+++ b/arch/arm/include/asm/arch-keystone/clock-k2e.h
@@ -25,27 +25,28 @@ enum ext_clk_e {
extern unsigned int external_clk[ext_clk_count];
-enum clk_e {
- core_pll_clk,
- pass_pll_clk,
- ddr3_pll_clk,
- sys_clk0_clk,
- sys_clk0_1_clk,
- sys_clk0_2_clk,
- sys_clk0_3_clk,
- sys_clk0_4_clk,
- sys_clk0_6_clk,
- sys_clk0_8_clk,
- sys_clk0_12_clk,
- sys_clk0_24_clk,
- sys_clk1_clk,
- sys_clk1_3_clk,
- sys_clk1_4_clk,
- sys_clk1_6_clk,
- sys_clk1_12_clk,
- sys_clk2_clk,
- sys_clk3_clk
-};
+#define CLK_LIST(CLK)\
+ CLK(0, core_pll_clk)\
+ CLK(1, pass_pll_clk)\
+ CLK(2, ddr3_pll_clk)\
+ CLK(3, sys_clk0_clk)\
+ CLK(4, sys_clk0_1_clk)\
+ CLK(5, sys_clk0_2_clk)\
+ CLK(6, sys_clk0_3_clk)\
+ CLK(7, sys_clk0_4_clk)\
+ CLK(8, sys_clk0_6_clk)\
+ CLK(9, sys_clk0_8_clk)\
+ CLK(10, sys_clk0_12_clk)\
+ CLK(11, sys_clk0_24_clk)\
+ CLK(12, sys_clk1_clk)\
+ CLK(13, sys_clk1_3_clk)\
+ CLK(14, sys_clk1_4_clk)\
+ CLK(15, sys_clk1_6_clk)\
+ CLK(16, sys_clk1_12_clk)\
+ CLK(17, sys_clk2_clk)\
+ CLK(18, sys_clk3_clk)
+
+#define PLLSET_CMD_LIST "<pa|ddr3>"
#define KS2_CLK1_6 sys_clk0_6_clk
diff --git a/arch/arm/include/asm/arch-keystone/clock-k2hk.h b/arch/arm/include/asm/arch-keystone/clock-k2hk.h
index bdb869b..f28d5f0 100644
--- a/arch/arm/include/asm/arch-keystone/clock-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/clock-k2hk.h
@@ -28,29 +28,30 @@ enum ext_clk_e {
extern unsigned int external_clk[ext_clk_count];
-enum clk_e {
- core_pll_clk,
- pass_pll_clk,
- tetris_pll_clk,
- ddr3a_pll_clk,
- ddr3b_pll_clk,
- sys_clk0_clk,
- sys_clk0_1_clk,
- sys_clk0_2_clk,
- sys_clk0_3_clk,
- sys_clk0_4_clk,
- sys_clk0_6_clk,
- sys_clk0_8_clk,
- sys_clk0_12_clk,
- sys_clk0_24_clk,
- sys_clk1_clk,
- sys_clk1_3_clk,
- sys_clk1_4_clk,
- sys_clk1_6_clk,
- sys_clk1_12_clk,
- sys_clk2_clk,
- sys_clk3_clk
-};
+#define CLK_LIST(CLK)\
+ CLK(0, core_pll_clk)\
+ CLK(1, pass_pll_clk)\
+ CLK(2, tetris_pll_clk)\
+ CLK(3, ddr3a_pll_clk)\
+ CLK(4, ddr3b_pll_clk)\
+ CLK(5, sys_clk0_clk)\
+ CLK(6, sys_clk0_1_clk)\
+ CLK(7, sys_clk0_2_clk)\
+ CLK(8, sys_clk0_3_clk)\
+ CLK(9, sys_clk0_4_clk)\
+ CLK(10, sys_clk0_6_clk)\
+ CLK(11, sys_clk0_8_clk)\
+ CLK(12, sys_clk0_12_clk)\
+ CLK(13, sys_clk0_24_clk)\
+ CLK(14, sys_clk1_clk)\
+ CLK(15, sys_clk1_3_clk)\
+ CLK(16, sys_clk1_4_clk)\
+ CLK(17, sys_clk1_6_clk)\
+ CLK(18, sys_clk1_12_clk)\
+ CLK(19, sys_clk2_clk)\
+ CLK(20, sys_clk3_clk)
+
+#define PLLSET_CMD_LIST "<pa|arm|ddr3a|ddr3b>"
#define KS2_CLK1_6 sys_clk0_6_clk
diff --git a/arch/arm/include/asm/arch-keystone/clock-k2l.h b/arch/arm/include/asm/arch-keystone/clock-k2l.h
new file mode 100644
index 0000000..bb9a5c4
--- /dev/null
+++ b/arch/arm/include/asm/arch-keystone/clock-k2l.h
@@ -0,0 +1,95 @@
+/*
+ * K2L: Clock management APIs
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_CLOCK_K2L_H
+#define __ASM_ARCH_CLOCK_K2L_H
+
+enum ext_clk_e {
+ sys_clk,
+ alt_core_clk,
+ pa_clk,
+ tetris_clk,
+ ddr3_clk,
+ pcie_clk,
+ sgmii_clk,
+ usb_clk,
+ rp1_clk,
+ ext_clk_count /* number of external clocks */
+};
+
+extern unsigned int external_clk[ext_clk_count];
+
+#define CLK_LIST(CLK)\
+ CLK(0, core_pll_clk)\
+ CLK(1, pass_pll_clk)\
+ CLK(2, tetris_pll_clk)\
+ CLK(3, ddr3_pll_clk)\
+ CLK(4, sys_clk0_clk)\
+ CLK(5, sys_clk0_1_clk)\
+ CLK(6, sys_clk0_2_clk)\
+ CLK(7, sys_clk0_3_clk)\
+ CLK(8, sys_clk0_4_clk)\
+ CLK(9, sys_clk0_6_clk)\
+ CLK(10, sys_clk0_8_clk)\
+ CLK(11, sys_clk0_12_clk)\
+ CLK(12, sys_clk0_24_clk)\
+ CLK(13, sys_clk1_clk)\
+ CLK(14, sys_clk1_3_clk)\
+ CLK(15, sys_clk1_4_clk)\
+ CLK(16, sys_clk1_6_clk)\
+ CLK(17, sys_clk1_12_clk)\
+ CLK(18, sys_clk2_clk)\
+ CLK(19, sys_clk3_clk)\
+
+#define PLLSET_CMD_LIST "<pa|arm|ddr3>"
+
+#define KS2_CLK1_6 sys_clk0_6_clk
+
+/* PLL identifiers */
+enum pll_type_e {
+ CORE_PLL,
+ PASS_PLL,
+ TETRIS_PLL,
+ DDR3_PLL,
+};
+
+enum {
+ SPD800,
+ SPD1000,
+ SPD1200,
+ SPD1350,
+ SPD1400,
+ SPD_RSV
+};
+
+#define CORE_PLL_799 {CORE_PLL, 13, 1, 2}
+#define CORE_PLL_983 {CORE_PLL, 16, 1, 2}
+#define CORE_PLL_1000 {CORE_PLL, 114, 7, 2}
+#define CORE_PLL_1167 {CORE_PLL, 19, 1, 2}
+#define CORE_PLL_1198 {CORE_PLL, 39, 2, 2}
+#define CORE_PLL_1228 {CORE_PLL, 20, 1, 2}
+#define PASS_PLL_1228 {PASS_PLL, 20, 1, 2}
+#define PASS_PLL_983 {PASS_PLL, 16, 1, 2}
+#define PASS_PLL_1050 {PASS_PLL, 205, 12, 2}
+#define TETRIS_PLL_491 {TETRIS_PLL, 8, 1, 2}
+#define TETRIS_PLL_737 {TETRIS_PLL, 12, 1, 2}
+#define TETRIS_PLL_799 {TETRIS_PLL, 13, 1, 2}
+#define TETRIS_PLL_983 {TETRIS_PLL, 16, 1, 2}
+#define TETRIS_PLL_1000 {TETRIS_PLL, 114, 7, 2}
+#define TETRIS_PLL_1167 {TETRIS_PLL, 19, 1, 2}
+#define TETRIS_PLL_1198 {TETRIS_PLL, 39, 2, 2}
+#define TETRIS_PLL_1228 {TETRIS_PLL, 20, 1, 2}
+#define TETRIS_PLL_1352 {TETRIS_PLL, 22, 1, 2}
+#define TETRIS_PLL_1401 {TETRIS_PLL, 114, 5, 2}
+#define DDR3_PLL_200 {DDR3_PLL, 4, 1, 2}
+#define DDR3_PLL_400 {DDR3_PLL, 16, 1, 4}
+#define DDR3_PLL_800 {DDR3_PLL, 16, 1, 2}
+#define DDR3_PLL_333 {DDR3_PLL, 20, 1, 6}
+
+#endif
diff --git a/arch/arm/include/asm/arch-keystone/clock.h b/arch/arm/include/asm/arch-keystone/clock.h
index dae000e..9f6cfb2 100644
--- a/arch/arm/include/asm/arch-keystone/clock.h
+++ b/arch/arm/include/asm/arch-keystone/clock.h
@@ -20,10 +20,22 @@
#include <asm/arch/clock-k2e.h>
#endif
+#ifdef CONFIG_SOC_K2L
+#include <asm/arch/clock-k2l.h>
+#endif
+
#define MAIN_PLL CORE_PLL
#include <asm/types.h>
+#define GENERATE_ENUM(NUM, ENUM) ENUM = NUM,
+#define GENERATE_INDX_STR(NUM, STRING) #NUM"\t- "#STRING"\n"
+#define CLOCK_INDEXES_LIST CLK_LIST(GENERATE_INDX_STR)
+
+enum clk_e {
+ CLK_LIST(GENERATE_ENUM)
+};
+
struct keystone_pll_regs {
u32 reg0;
u32 reg1;
@@ -46,6 +58,7 @@ void init_pll(const struct pll_init_data *data);
unsigned long clk_get_rate(unsigned int clk);
unsigned long clk_round_rate(unsigned int clk, unsigned long hz);
int clk_set_rate(unsigned int clk, unsigned long hz);
+void pass_pll_pa_clk_enable(void);
int get_max_dev_speed(void);
int get_max_arm_speed(void);
diff --git a/arch/arm/include/asm/arch-keystone/ddr3.h b/arch/arm/include/asm/arch-keystone/ddr3.h
index 6bf35d3..b044d6f 100644
--- a/arch/arm/include/asm/arch-keystone/ddr3.h
+++ b/arch/arm/include/asm/arch-keystone/ddr3.h
@@ -49,8 +49,14 @@ struct ddr3_emif_config {
};
void ddr3_init(void);
+int ddr3_get_size(void);
void ddr3_reset_ddrphy(void);
+void ddr3_init_ecc(u32 base);
+void ddr3_disable_ecc(u32 base);
+void ddr3_check_ecc_int(u32 base);
+int ddr3_ecc_support_rmw(u32 base);
void ddr3_err_reset_workaround(void);
+void ddr3_enable_ecc(u32 base, int test);
void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg);
void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg);
diff --git a/arch/arm/include/asm/arch-keystone/emac_defs.h b/arch/arm/include/asm/arch-keystone/emac_defs.h
deleted file mode 100644
index 9cd8925..0000000
--- a/arch/arm/include/asm/arch-keystone/emac_defs.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * emac definitions for keystone2 devices
- *
- * (C) Copyright 2012-2014
- * Texas Instruments Incorporated, <www.ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _EMAC_DEFS_H_
-#define _EMAC_DEFS_H_
-
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-
-#define EMAC_EMACSL_BASE_ADDR (KS2_PASS_BASE + 0x00090900)
-#define EMAC_MDIO_BASE_ADDR (KS2_PASS_BASE + 0x00090300)
-#define EMAC_SGMII_BASE_ADDR (KS2_PASS_BASE + 0x00090100)
-
-#define KEYSTONE2_EMAC_GIG_ENABLE
-
-#define MAC_ID_BASE_ADDR (KS2_DEVICE_STATE_CTRL_BASE + 0x110)
-
-#ifdef CONFIG_SOC_K2HK
-/* MDIO module input frequency */
-#define EMAC_MDIO_BUS_FREQ (clk_get_rate(pass_pll_clk))
-/* MDIO clock output frequency */
-#define EMAC_MDIO_CLOCK_FREQ 1000000 /* 1.0 MHz */
-#endif
-
-/* MII Status Register */
-#define MII_STATUS_REG 1
-#define MII_STATUS_LINK_MASK (0x4)
-
-/* Marvell 88E1111 PHY ID */
-#define PHY_MARVELL_88E1111 (0x01410cc0)
-
-#define MDIO_CONTROL_IDLE (0x80000000)
-#define MDIO_CONTROL_ENABLE (0x40000000)
-#define MDIO_CONTROL_FAULT_ENABLE (0x40000)
-#define MDIO_CONTROL_FAULT (0x80000)
-#define MDIO_USERACCESS0_GO (0x80000000)
-#define MDIO_USERACCESS0_WRITE_READ (0x0)
-#define MDIO_USERACCESS0_WRITE_WRITE (0x40000000)
-#define MDIO_USERACCESS0_ACK (0x20000000)
-
-#define EMAC_MACCONTROL_MIIEN_ENABLE (0x20)
-#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE (0x1)
-#define EMAC_MACCONTROL_GIGABIT_ENABLE (1 << 7)
-#define EMAC_MACCONTROL_GIGFORCE (1 << 17)
-#define EMAC_MACCONTROL_RMIISPEED_100 (1 << 15)
-
-#define EMAC_MIN_ETHERNET_PKT_SIZE 60
-
-struct mac_sl_cfg {
- u_int32_t max_rx_len; /* Maximum receive packet length. */
- u_int32_t ctl; /* Control bitfield */
-};
-
-/*
- * Definition: Control bitfields used in the ctl field of hwGmacSlCfg_t
- */
-#define GMACSL_RX_ENABLE_RCV_CONTROL_FRAMES (1 << 24)
-#define GMACSL_RX_ENABLE_RCV_SHORT_FRAMES (1 << 23)
-#define GMACSL_RX_ENABLE_RCV_ERROR_FRAMES (1 << 22)
-#define GMACSL_RX_ENABLE_EXT_CTL (1 << 18)
-#define GMACSL_RX_ENABLE_GIG_FORCE (1 << 17)
-#define GMACSL_RX_ENABLE_IFCTL_B (1 << 16)
-#define GMACSL_RX_ENABLE_IFCTL_A (1 << 15)
-#define GMACSL_RX_ENABLE_CMD_IDLE (1 << 11)
-#define GMACSL_TX_ENABLE_SHORT_GAP (1 << 10)
-#define GMACSL_ENABLE_GIG_MODE (1 << 7)
-#define GMACSL_TX_ENABLE_PACE (1 << 6)
-#define GMACSL_ENABLE (1 << 5)
-#define GMACSL_TX_ENABLE_FLOW_CTL (1 << 4)
-#define GMACSL_RX_ENABLE_FLOW_CTL (1 << 3)
-#define GMACSL_ENABLE_LOOPBACK (1 << 1)
-#define GMACSL_ENABLE_FULL_DUPLEX (1 << 0)
-
-/*
- * DEFINTITION: function return values
- */
-#define GMACSL_RET_OK 0
-#define GMACSL_RET_INVALID_PORT -1
-#define GMACSL_RET_WARN_RESET_INCOMPLETE -2
-#define GMACSL_RET_WARN_MAXLEN_TOO_BIG -3
-#define GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE -4
-
-/* Register offsets */
-#define CPGMACSL_REG_ID 0x00
-#define CPGMACSL_REG_CTL 0x04
-#define CPGMACSL_REG_STATUS 0x08
-#define CPGMACSL_REG_RESET 0x0c
-#define CPGMACSL_REG_MAXLEN 0x10
-#define CPGMACSL_REG_BOFF 0x14
-#define CPGMACSL_REG_RX_PAUSE 0x18
-#define CPGMACSL_REG_TX_PAURSE 0x1c
-#define CPGMACSL_REG_EM_CTL 0x20
-#define CPGMACSL_REG_PRI 0x24
-
-/* Soft reset register values */
-#define CPGMAC_REG_RESET_VAL_RESET_MASK (1 << 0)
-#define CPGMAC_REG_RESET_VAL_RESET (1 << 0)
-
-/* Maxlen register values */
-#define CPGMAC_REG_MAXLEN_LEN 0x3fff
-
-/* Control bitfields */
-#define CPSW_CTL_P2_PASS_PRI_TAGGED (1 << 5)
-#define CPSW_CTL_P1_PASS_PRI_TAGGED (1 << 4)
-#define CPSW_CTL_P0_PASS_PRI_TAGGED (1 << 3)
-#define CPSW_CTL_P0_ENABLE (1 << 2)
-#define CPSW_CTL_VLAN_AWARE (1 << 1)
-#define CPSW_CTL_FIFO_LOOPBACK (1 << 0)
-
-#define DEVICE_CPSW_NUM_PORTS 5 /* 5 switch ports */
-#define DEVICE_CPSW_BASE (0x02090800)
-#define target_get_switch_ctl() CPSW_CTL_P0_ENABLE /* Enable port 0 */
-#define SWITCH_MAX_PKT_SIZE 9000
-
-/* Register offsets */
-#define CPSW_REG_CTL 0x004
-#define CPSW_REG_STAT_PORT_EN 0x00c
-#define CPSW_REG_MAXLEN 0x040
-#define CPSW_REG_ALE_CONTROL 0x608
-#define CPSW_REG_ALE_PORTCTL(x) (0x640 + (x)*4)
-
-/* Register values */
-#define CPSW_REG_VAL_STAT_ENABLE_ALL 0xf
-#define CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE ((u_int32_t)0xc0000000)
-#define CPSW_REG_VAL_ALE_CTL_BYPASS ((u_int32_t)0x00000010)
-#define CPSW_REG_VAL_PORTCTL_FORWARD_MODE 0x3
-
-#define SGMII_REG_STATUS_LOCK BIT(4)
-#define SGMII_REG_STATUS_LINK BIT(0)
-#define SGMII_REG_STATUS_AUTONEG BIT(2)
-#define SGMII_REG_CONTROL_AUTONEG BIT(0)
-#define SGMII_REG_CONTROL_MASTER BIT(5)
-#define SGMII_REG_MR_ADV_ENABLE BIT(0)
-#define SGMII_REG_MR_ADV_LINK BIT(15)
-#define SGMII_REG_MR_ADV_FULL_DUPLEX BIT(12)
-#define SGMII_REG_MR_ADV_GIG_MODE BIT(11)
-
-#define SGMII_LINK_MAC_MAC_AUTONEG 0
-#define SGMII_LINK_MAC_PHY 1
-#define SGMII_LINK_MAC_MAC_FORCED 2
-#define SGMII_LINK_MAC_FIBER 3
-#define SGMII_LINK_MAC_PHY_FORCED 4
-
-#define TARGET_SGMII_BASE KS2_PASS_BASE + 0x00090100
-#define TARGET_SGMII_BASE_ADDRESSES {KS2_PASS_BASE + 0x00090100, \
- KS2_PASS_BASE + 0x00090200, \
- KS2_PASS_BASE + 0x00090400, \
- KS2_PASS_BASE + 0x00090500}
-
-#define SGMII_OFFSET(x) ((x <= 1) ? (x * 0x100) : ((x * 0x100) + 0x100))
-
-/*
- * SGMII registers
- */
-#define SGMII_IDVER_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x000)
-#define SGMII_SRESET_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x004)
-#define SGMII_CTL_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x010)
-#define SGMII_STATUS_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x014)
-#define SGMII_MRADV_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x018)
-#define SGMII_LPADV_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x020)
-#define SGMII_TXCFG_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x030)
-#define SGMII_RXCFG_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x034)
-#define SGMII_AUXCFG_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x038)
-
-#define DEVICE_EMACSL_BASE(x) (KS2_PASS_BASE + 0x00090900 + (x) * 0x040)
-#define DEVICE_N_GMACSL_PORTS 4
-#define DEVICE_EMACSL_RESET_POLL_COUNT 100
-
-#define DEVICE_PSTREAM_CFG_REG_ADDR (KS2_PASS_BASE + 0x604)
-
-#ifdef CONFIG_SOC_K2HK
-#define DEVICE_PSTREAM_CFG_REG_VAL_ROUTE_CPPI 0x06060606
-#endif
-
-#define hw_config_streaming_switch() \
- writel(DEVICE_PSTREAM_CFG_REG_VAL_ROUTE_CPPI,\
- DEVICE_PSTREAM_CFG_REG_ADDR);
-
-/* EMAC MDIO Registers Structure */
-struct mdio_regs {
- dv_reg version;
- dv_reg control;
- dv_reg alive;
- dv_reg link;
- dv_reg linkintraw;
- dv_reg linkintmasked;
- u_int8_t rsvd0[8];
- dv_reg userintraw;
- dv_reg userintmasked;
- dv_reg userintmaskset;
- dv_reg userintmaskclear;
- u_int8_t rsvd1[80];
- dv_reg useraccess0;
- dv_reg userphysel0;
- dv_reg useraccess1;
- dv_reg userphysel1;
-};
-
-/* Ethernet MAC Registers Structure */
-struct emac_regs {
- dv_reg idver;
- dv_reg maccontrol;
- dv_reg macstatus;
- dv_reg soft_reset;
- dv_reg rx_maxlen;
- u32 rsvd0;
- dv_reg rx_pause;
- dv_reg tx_pause;
- dv_reg emcontrol;
- dv_reg pri_map;
- u32 rsvd1[6];
-};
-
-#define SGMII_ACCESS(port, reg) \
- *((volatile unsigned int *)(sgmiis[port] + reg))
-
-struct eth_priv_t {
- char int_name[32];
- int rx_flow;
- int phy_addr;
- int slave_port;
- int sgmii_link_type;
-};
-
-extern struct eth_priv_t eth_priv_cfg[];
-
-int keystone2_emac_initialize(struct eth_priv_t *eth_priv);
-void sgmii_serdes_setup_156p25mhz(void);
-void sgmii_serdes_shutdown(void);
-
-#endif /* _EMAC_DEFS_H_ */
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2e.h b/arch/arm/include/asm/arch-keystone/hardware-k2e.h
index 62172a4..9512756 100644
--- a/arch/arm/include/asm/arch-keystone/hardware-k2e.h
+++ b/arch/arm/include/asm/arch-keystone/hardware-k2e.h
@@ -34,11 +34,34 @@
#define KS2_LPSC_PCIE_1 27
#define KS2_LPSC_XGE 50
+/* MSMC */
+#define KS2_MSMC_SEGMENT_PCIE1 13
+
/* Chip Interrupt Controller */
#define KS2_CIC2_DDR3_ECC_IRQ_NUM -1 /* not defined in K2E */
#define KS2_CIC2_DDR3_ECC_CHAN_NUM -1 /* not defined in K2E */
+/* SGMII SerDes */
+#define KS2_SGMII_SERDES2_BASE 0x02324000
+#define KS2_LANES_PER_SGMII_SERDES 4
+
/* Number of DSP cores */
#define KS2_NUM_DSPS 1
+/* NETCP pktdma */
+#define KS2_NETCP_PDMA_CTRL_BASE 0x24186000
+#define KS2_NETCP_PDMA_TX_BASE 0x24187000
+#define KS2_NETCP_PDMA_TX_CH_NUM 21
+#define KS2_NETCP_PDMA_RX_BASE 0x24188000
+#define KS2_NETCP_PDMA_RX_CH_NUM 91
+#define KS2_NETCP_PDMA_SCHED_BASE 0x24186100
+#define KS2_NETCP_PDMA_RX_FLOW_BASE 0x24189000
+#define KS2_NETCP_PDMA_RX_FLOW_NUM 96
+#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001
+#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002
+#define KS2_NETCP_PDMA_TX_SND_QUEUE 896
+
+/* NETCP */
+#define KS2_NETCP_BASE 0x24000000
+
#endif
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
index eb132f7..5a9ea4f 100644
--- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
@@ -10,8 +10,6 @@
#ifndef __ASM_ARCH_HARDWARE_K2HK_H
#define __ASM_ARCH_HARDWARE_K2HK_H
-#define KS2_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c)
-
#define KS2_ARM_PLL_EN BIT(13)
/* PA SS Registers */
@@ -81,7 +79,30 @@
#define KS2_DDR3B_EMIF_DATA_BASE 0x60000000
#define KS2_DDR3B_DDRPHYC 0x02328000
+#define KS2_CIC2_DDR3_ECC_IRQ_NUM 0x0D3 /* DDR3 ECC system irq number */
+#define KS2_CIC2_DDR3_ECC_CHAN_NUM 0x01D /* DDR3 ECC int mapped to CIC2
+ channel 29 */
+
+/* SGMII SerDes */
+#define KS2_LANES_PER_SGMII_SERDES 4
+
/* Number of DSP cores */
#define KS2_NUM_DSPS 8
+/* NETCP pktdma */
+#define KS2_NETCP_PDMA_CTRL_BASE 0x02004000
+#define KS2_NETCP_PDMA_TX_BASE 0x02004400
+#define KS2_NETCP_PDMA_TX_CH_NUM 9
+#define KS2_NETCP_PDMA_RX_BASE 0x02004800
+#define KS2_NETCP_PDMA_RX_CH_NUM 26
+#define KS2_NETCP_PDMA_SCHED_BASE 0x02004c00
+#define KS2_NETCP_PDMA_RX_FLOW_BASE 0x02005000
+#define KS2_NETCP_PDMA_RX_FLOW_NUM 32
+#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001
+#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002
+#define KS2_NETCP_PDMA_TX_SND_QUEUE 648
+
+/* NETCP */
+#define KS2_NETCP_BASE 0x02000000
+
#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2l.h b/arch/arm/include/asm/arch-keystone/hardware-k2l.h
new file mode 100644
index 0000000..05532ad
--- /dev/null
+++ b/arch/arm/include/asm/arch-keystone/hardware-k2l.h
@@ -0,0 +1,101 @@
+/*
+ * K2L: SoC definitions
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_K2L_H
+#define __ASM_ARCH_HARDWARE_K2L_H
+
+#define KS2_ARM_PLL_EN BIT(13)
+
+/* PA SS Registers */
+#define KS2_PASS_BASE 0x26000000
+
+/* Power and Sleep Controller (PSC) Domains */
+#define KS2_LPSC_MOD 0
+#define KS2_LPSC_DFE_IQN_SYS 1
+#define KS2_LPSC_USB 2
+#define KS2_LPSC_EMIF25_SPI 3
+#define KS2_LPSC_TSIP 4
+#define KS2_LPSC_DEBUGSS_TRC 5
+#define KS2_LPSC_TETB_TRC 6
+#define KS2_LPSC_PKTPROC 7
+#define KS2_LPSC_PA KS2_LPSC_PKTPROC
+#define KS2_LPSC_SGMII 8
+#define KS2_LPSC_CPGMAC KS2_LPSC_SGMII
+#define KS2_LPSC_CRYPTO 9
+#define KS2_LPSC_PCIE0 10
+#define KS2_LPSC_PCIE1 11
+#define KS2_LPSC_JESD_MISC 12
+#define KS2_LPSC_CHIP_SRSS 13
+#define KS2_LPSC_MSMC 14
+#define KS2_LPSC_GEM_1 16
+#define KS2_LPSC_GEM_2 17
+#define KS2_LPSC_GEM_3 18
+#define KS2_LPSC_EMIF4F_DDR3 23
+#define KS2_LPSC_TAC 25
+#define KS2_LPSC_RAC 26
+#define KS2_LPSC_DDUC4X_CFR2X_BB 27
+#define KS2_LPSC_FFTC_A 28
+#define KS2_LPSC_OSR 34
+#define KS2_LPSC_TCP3D_0 35
+#define KS2_LPSC_TCP3D_1 37
+#define KS2_LPSC_VCP2X4_A 39
+#define KS2_LPSC_VCP2X4_B 40
+#define KS2_LPSC_VCP2X4_C 41
+#define KS2_LPSC_VCP2X4_D 42
+#define KS2_LPSC_BCP 47
+#define KS2_LPSC_DPD4X 48
+#define KS2_LPSC_FFTC_B 49
+#define KS2_LPSC_IQN_AIL 50
+
+/* MSMC */
+#define KS2_MSMC_SEGMENT_PCIE1 14
+
+/* Chip Interrupt Controller */
+#define KS2_CIC2_DDR3_ECC_IRQ_NUM 0x0D3
+#define KS2_CIC2_DDR3_ECC_CHAN_NUM 0x01D
+
+/* OSR */
+#define KS2_OSR_DATA_BASE 0x70000000 /* OSR data base */
+#define KS2_OSR_CFG_BASE 0x02348c00 /* OSR config base */
+#define KS2_OSR_ECC_VEC 0x08 /* ECC Vector reg */
+#define KS2_OSR_ECC_CTRL 0x14 /* ECC control reg */
+
+/* OSR ECC Vector register */
+#define KS2_OSR_ECC_VEC_TRIG_RD BIT(15) /* trigger a read op */
+#define KS2_OSR_ECC_VEC_RD_DONE BIT(24) /* read complete */
+
+#define KS2_OSR_ECC_VEC_RAM_ID_SH 0 /* RAM ID shift */
+#define KS2_OSR_ECC_VEC_RD_ADDR_SH 16 /* read address shift */
+
+/* OSR ECC control register */
+#define KS2_OSR_ECC_CTRL_EN BIT(0) /* ECC enable bit */
+#define KS2_OSR_ECC_CTRL_CHK BIT(1) /* ECC check bit */
+#define KS2_OSR_ECC_CTRL_RMW BIT(2) /* ECC check bit */
+
+/* Number of OSR RAM banks */
+#define KS2_OSR_NUM_RAM_BANKS 4
+
+/* OSR memory size */
+#define KS2_OSR_SIZE 0x100000
+
+/* Number of DSP cores */
+#define KS2_NUM_DSPS 4
+
+/* NETCP pktdma */
+#define KS2_NETCP_PDMA_CTRL_BASE 0x26186000
+#define KS2_NETCP_PDMA_TX_BASE 0x26187000
+#define KS2_NETCP_PDMA_TX_CH_NUM 21
+#define KS2_NETCP_PDMA_RX_BASE 0x26188000
+#define KS2_NETCP_PDMA_RX_CH_NUM 91
+#define KS2_NETCP_PDMA_SCHED_BASE 0x26186100
+#define KS2_NETCP_PDMA_RX_FLOW_BASE 0x26189000
+#define KS2_NETCP_PDMA_RX_FLOW_NUM 96
+#define KS2_NETCP_PDMA_TX_SND_QUEUE 896
+
+#endif /* __ASM_ARCH_HARDWARE_K2L_H */
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
index 76e6441..c6a54d8 100644
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -87,6 +87,52 @@ typedef volatile unsigned int *dv_reg_p;
#define KS2_DDR3_PLLCTRL_PHY_RESET 0x80000000
+/* DDR3 ECC */
+#define KS2_DDR3_ECC_INT_STATUS_OFFSET 0x0AC
+#define KS2_DDR3_ECC_INT_ENABLE_SET_SYS_OFFSET 0x0B4
+#define KS2_DDR3_ECC_CTRL_OFFSET 0x110
+#define KS2_DDR3_ECC_ADDR_RANGE1_OFFSET 0x114
+#define KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET 0x130
+#define KS2_DDR3_ONE_BIT_ECC_ERR_ADDR_LOG_OFFSET 0x13C
+
+/* DDR3 ECC Interrupt Status register */
+#define KS2_DDR3_1B_ECC_ERR_SYS BIT(5)
+#define KS2_DDR3_2B_ECC_ERR_SYS BIT(4)
+#define KS2_DDR3_WR_ECC_ERR_SYS BIT(3)
+
+/* DDR3 ECC Control register */
+#define KS2_DDR3_ECC_EN BIT(31)
+#define KS2_DDR3_ECC_ADDR_RNG_PROT BIT(30)
+#define KS2_DDR3_ECC_VERIFY_EN BIT(29)
+#define KS2_DDR3_ECC_RMW_EN BIT(28)
+#define KS2_DDR3_ECC_ADDR_RNG_1_EN BIT(0)
+
+#define KS2_DDR3_ECC_ENABLE (KS2_DDR3_ECC_EN | \
+ KS2_DDR3_ECC_ADDR_RNG_PROT | \
+ KS2_DDR3_ECC_VERIFY_EN)
+
+/* EDMA */
+#define KS2_EDMA0_BASE 0x02700000
+
+/* EDMA3 register offsets */
+#define KS2_EDMA_QCHMAP0 0x0200
+#define KS2_EDMA_IPR 0x1068
+#define KS2_EDMA_ICR 0x1070
+#define KS2_EDMA_QEECR 0x1088
+#define KS2_EDMA_QEESR 0x108c
+#define KS2_EDMA_PARAM_1(x) (0x4020 + (4 * x))
+
+/* Chip Interrupt Controller */
+#define KS2_CIC2_BASE 0x02608000
+
+/* Chip Interrupt Controller register offsets */
+#define KS2_CIC_CTRL 0x04
+#define KS2_CIC_HOST_CTRL 0x0C
+#define KS2_CIC_GLOBAL_ENABLE 0x10
+#define KS2_CIC_SYS_ENABLE_IDX_SET 0x28
+#define KS2_CIC_HOST_ENABLE_IDX_SET 0x34
+#define KS2_CIC_CHAN_MAP(n) (0x0400 + (n << 2))
+
#define KS2_UART0_BASE 0x02530c00
#define KS2_UART1_BASE 0x02531000
@@ -140,19 +186,51 @@ typedef volatile unsigned int *dv_reg_p;
/* Flag from ks2_debug options to check if DSPs need to stay ON */
#define DBG_LEAVE_DSPS_ON 0x1
+/* MSMC control */
+#define KS2_MSMC_CTRL_BASE 0x0bc00000
+#define KS2_MSMC_DATA_BASE 0x0c000000
+#define KS2_MSMC_SEGMENT_TETRIS 8
+#define KS2_MSMC_SEGMENT_NETCP 9
+#define KS2_MSMC_SEGMENT_QM_PDSP 10
+#define KS2_MSMC_SEGMENT_PCIE0 11
+
+/* MSMC segment size shift bits */
+#define KS2_MSMC_SEG_SIZE_SHIFT 12
+#define KS2_MSMC_MAP_SEG_NUM (2 << (30 - KS2_MSMC_SEG_SIZE_SHIFT))
+#define KS2_MSMC_DST_SEG_BASE (CONFIG_SYS_LPAE_SDRAM_BASE >> \
+ KS2_MSMC_SEG_SIZE_SHIFT)
+
/* Device speed */
#define KS2_REV1_DEVSPEED (KS2_DEVICE_STATE_CTRL_BASE + 0xc98)
#define KS2_EFUSE_BOOTROM (KS2_DEVICE_STATE_CTRL_BASE + 0xc90)
+#define KS2_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c)
/* Queue manager */
-#define KS2_QM_MANAGER_BASE 0x02a02000
+#define KS2_QM_BASE_ADDRESS 0x23a80000
+#define KS2_QM_CONF_BASE 0x02a02000
#define KS2_QM_DESC_SETUP_BASE 0x02a03000
-#define KS2_QM_MANAGER_QUEUES_BASEi 0x02a80000
+#define KS2_QM_STATUS_RAM_BASE 0x02a06000
+#define KS2_QM_INTD_CONF_BASE 0x02a0c000
+#define KS2_QM_PDSP1_CMD_BASE 0x02a20000
+#define KS2_QM_PDSP1_CTRL_BASE 0x02a0f000
+#define KS2_QM_PDSP1_IRAM_BASE 0x02a10000
+#define KS2_QM_MANAGER_QUEUES_BASE 0x02a80000
#define KS2_QM_MANAGER_Q_PROXY_BASE 0x02ac0000
#define KS2_QM_QUEUE_STATUS_BASE 0x02a40000
+#define KS2_QM_LINK_RAM_BASE 0x00100000
+#define KS2_QM_REGION_NUM 64
+#define KS2_QM_QPOOL_NUM 4000
-/* MSMC control */
-#define KS2_MSMC_CTRL_BASE 0x0bc00000
+/* USB */
+#define KS2_USB_SS_BASE 0x02680000
+#define KS2_USB_HOST_XHCI_BASE (KS2_USB_SS_BASE + 0x10000)
+#define KS2_DEV_USB_PHY_BASE 0x02620738
+#define KS2_USB_PHY_CFG_BASE 0x02630000
+
+#define KS2_MAC_ID_BASE_ADDR (KS2_DEVICE_STATE_CTRL_BASE + 0x110)
+
+/* SGMII SerDes */
+#define KS2_SGMII_SERDES_BASE 0x0232a000
#ifdef CONFIG_SOC_K2HK
#include <asm/arch/hardware-k2hk.h>
@@ -162,6 +240,10 @@ typedef volatile unsigned int *dv_reg_p;
#include <asm/arch/hardware-k2e.h>
#endif
+#ifdef CONFIG_SOC_K2L
+#include <asm/arch/hardware-k2l.h>
+#endif
+
#ifndef __ASSEMBLY__
static inline int cpu_is_k2hk(void)
{
@@ -179,6 +261,14 @@ static inline int cpu_is_k2e(void)
return (part_no == 0xb9a6) ? 1 : 0;
}
+static inline int cpu_is_k2l(void)
+{
+ unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG);
+ unsigned int part_no = (jtag_id >> 12) & 0xffff;
+
+ return (part_no == 0xb9a7) ? 1 : 0;
+}
+
static inline int cpu_revision(void)
{
unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG);
diff --git a/arch/arm/include/asm/arch-keystone/msmc.h b/arch/arm/include/asm/arch-keystone/msmc.h
index c320db5..083f5ba 100644
--- a/arch/arm/include/asm/arch-keystone/msmc.h
+++ b/arch/arm/include/asm/arch-keystone/msmc.h
@@ -12,6 +12,34 @@
#include <asm/arch/hardware.h>
+enum mpax_seg_size {
+ MPAX_SEG_4K = 0x0b,
+ MPAX_SEG_8K,
+ MPAX_SEG_16K,
+ MPAX_SEG_32K,
+ MPAX_SEG_64K,
+ MPAX_SEG_128K,
+ MPAX_SEG_256K,
+ MPAX_SEG_512K,
+ MPAX_SEG_1M,
+ MPAX_SEG_2M,
+ MPAX_SEG_4M,
+ MPAX_SEG_8M,
+ MPAX_SEG_16M,
+ MPAX_SEG_32M,
+ MPAX_SEG_64M,
+ MPAX_SEG_128M,
+ MPAX_SEG_256M,
+ MPAX_SEG_512M,
+ MPAX_SEG_1G,
+ MPAX_SEG_2G,
+ MPAX_SEG_4G
+};
+
void msmc_share_all_segments(int priv_id);
+void msmc_get_ses_mpax(int priv_id, int ses_pair, u32 *mpax);
+void msmc_set_ses_mpax(int priv_id, int ses_pair, u32 *mpax);
+void msmc_map_ses_segment(int priv_id, int ses_pair,
+ u32 src_pfn, u32 dst_pfn, enum mpax_seg_size size);
#endif
diff --git a/arch/arm/include/asm/arch-keystone/spl.h b/arch/arm/include/asm/arch-keystone/spl.h
deleted file mode 100644
index a7102d5..0000000
--- a/arch/arm/include/asm/arch-keystone/spl.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * (C) Copyright 2012-2014
- * Texas Instruments, <www.ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef _ASM_ARCH_SPL_H_
-#define _ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_SPI 2
-
-#endif
diff --git a/arch/arm/include/asm/arch-keystone/xhci-keystone.h b/arch/arm/include/asm/arch-keystone/xhci-keystone.h
new file mode 100644
index 0000000..3aab4e0
--- /dev/null
+++ b/arch/arm/include/asm/arch-keystone/xhci-keystone.h
@@ -0,0 +1,21 @@
+/*
+ * USB 3.0 DRD Controller
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define USB3_PHY_REF_SSP_EN BIT(29)
+#define USB3_PHY_OTG_VBUSVLDECTSEL BIT(16)
+
+/* KEYSTONE2 XHCI PHY register structure */
+struct keystone_xhci_phy {
+ unsigned int phy_utmi; /* ctl0 */
+ unsigned int phy_pipe; /* ctl1 */
+ unsigned int phy_param_ctrl_1; /* ctl2 */
+ unsigned int phy_param_ctrl_2; /* ctl3 */
+ unsigned int phy_clock; /* ctl4 */
+ unsigned int phy_pll; /* ctl5 */
+};
diff --git a/arch/arm/include/asm/arch-omap3/mux.h b/arch/arm/include/asm/arch-omap3/mux.h
index 2f83206..eba4a5c 100644
--- a/arch/arm/include/asm/arch-omap3/mux.h
+++ b/arch/arm/include/asm/arch-omap3/mux.h
@@ -281,7 +281,7 @@
#define CONTROL_PADCONF_SYS_OFF_MODE 0x0A18
#define CONTROL_PADCONF_SYS_CLKOUT1 0x0A1A
#define CONTROL_PADCONF_SYS_CLKOUT2 0x01E2
-#define CONTROL_PADCONF_JTAG_nTRST 0x0A1C
+#define CONTROL_PADCONF_JTAG_NTRST 0x0A1C
#define CONTROL_PADCONF_JTAG_TCK 0x0A1E
#define CONTROL_PADCONF_JTAG_TMS 0x0A20
#define CONTROL_PADCONF_JTAG_TDI 0x0A22
@@ -443,7 +443,7 @@
#define OMAP34XX_CTRL_WKUP_CTRL (OMAP34XX_CTRL_BASE + 0x0A5C)
#define OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ (1<<6)
-#define MUX_VAL(OFFSET,VALUE)\
+#define MUX_VAL(OFFSET, VALUE)\
writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET));
#define CP(x) (CONTROL_PADCONF_##x)
diff --git a/arch/arm/include/asm/arch-socfpga/spl.h b/arch/arm/include/asm/arch-socfpga/spl.h
deleted file mode 100644
index 7e310d5..0000000
--- a/arch/arm/include/asm/arch-socfpga/spl.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2012 Pavel Machek <pavel@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _SOCFPGA_SPL_H_
-#define _SOCFPGA_SPL_H_
-
-/* Symbols from linker script */
-extern char __malloc_start, __malloc_end, __stack_start;
-
-#define BOOT_DEVICE_RAM 1
-
-#endif
diff --git a/arch/arm/include/asm/imx-common/spi.h b/arch/arm/include/asm/imx-common/spi.h
new file mode 100644
index 0000000..1d4473a
--- /dev/null
+++ b/arch/arm/include/asm/imx-common/spi.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MXC_SPI_H_
+#define __MXC_SPI_H_
+
+/*
+ * Board-level chip-select callback
+ * Should return GPIO # to be used for chip-select
+ */
+
+int board_spi_cs_gpio(unsigned bus, unsigned cs);
+
+#endif
diff --git a/arch/arm/include/asm/imx-common/video.h b/arch/arm/include/asm/imx-common/video.h
index 2d94850..1a907d4 100644
--- a/arch/arm/include/asm/imx-common/video.h
+++ b/arch/arm/include/asm/imx-common/video.h
@@ -21,4 +21,9 @@ struct display_info_t {
extern int detect_hdmi(struct display_info_t const *dev);
#endif
+#ifdef CONFIG_IMX_VIDEO_SKIP
+extern struct display_info_t const displays[];
+extern size_t display_count;
+#endif
+
#endif
diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h
index e5daf89..8acd7cd 100644
--- a/arch/arm/include/asm/spl.h
+++ b/arch/arm/include/asm/spl.h
@@ -7,7 +7,7 @@
#ifndef _ASM_SPL_H_
#define _ASM_SPL_H_
-#if defined(CONFIG_OMAP) || defined(CONFIG_SOCFPGA) \
+#if defined(CONFIG_OMAP) \
|| defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) \
|| defined(CONFIG_EXYNOS4210)
/* Platform-specific defines */
diff --git a/arch/arm/include/asm/arch-keystone/keystone_nav.h b/arch/arm/include/asm/ti-common/keystone_nav.h
index ab81eaf..696d8c6 100644
--- a/arch/arm/include/asm/arch-keystone/keystone_nav.h
+++ b/arch/arm/include/asm/ti-common/keystone_nav.h
@@ -13,10 +13,6 @@
#include <asm/arch/hardware.h>
#include <asm/io.h>
-enum soc_type_t {
- k2hk
-};
-
#define QM_OK 0
#define QM_ERR -1
#define QM_DESC_TYPE_HOST 0
@@ -173,6 +169,8 @@ struct pktdma_cfg {
u32 rx_flow; /* flow that is used for RX */
};
+extern struct pktdma_cfg netcp_pktdma;
+
/*
* packet dma user allocates memory for rx buffers
* and describe it in the following structure
@@ -184,10 +182,10 @@ struct rx_buff_desc {
u32 rx_flow;
};
-int netcp_close(void);
-int netcp_init(struct rx_buff_desc *rx_buffers);
-int netcp_send(u32 *pkt, int num_bytes, u32 swinfo2);
-void *netcp_recv(u32 **pkt, int *num_bytes);
-void netcp_release_rxhd(void *hd);
+int ksnav_close(struct pktdma_cfg *pktdma);
+int ksnav_init(struct pktdma_cfg *pktdma, struct rx_buff_desc *rx_buffers);
+int ksnav_send(struct pktdma_cfg *pktdma, u32 *pkt, int num_bytes, u32 swinfo2);
+void *ksnav_recv(struct pktdma_cfg *pktdma, u32 **pkt, int *num_bytes);
+void ksnav_release_rxhd(struct pktdma_cfg *pktdma, void *hd);
#endif /* _KEYSTONE_NAV_H_ */
diff --git a/arch/arm/include/asm/ti-common/keystone_net.h b/arch/arm/include/asm/ti-common/keystone_net.h
new file mode 100644
index 0000000..011c03c
--- /dev/null
+++ b/arch/arm/include/asm/ti-common/keystone_net.h
@@ -0,0 +1,249 @@
+/*
+ * emac definitions for keystone2 devices
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _KEYSTONE_NET_H_
+#define _KEYSTONE_NET_H_
+
+#include <asm/io.h>
+
+/* EMAC */
+#ifdef CONFIG_KSNET_NETCP_V1_0
+
+#define GBETH_BASE (CONFIG_KSNET_NETCP_BASE + 0x00090000)
+#define EMAC_EMACSL_BASE_ADDR (GBETH_BASE + 0x900)
+#define EMAC_MDIO_BASE_ADDR (GBETH_BASE + 0x300)
+#define EMAC_SGMII_BASE_ADDR (GBETH_BASE + 0x100)
+#define DEVICE_EMACSL_BASE(x) (EMAC_EMACSL_BASE_ADDR + (x) * 0x040)
+
+/* Register offsets */
+#define CPGMACSL_REG_CTL 0x04
+#define CPGMACSL_REG_STATUS 0x08
+#define CPGMACSL_REG_RESET 0x0c
+#define CPGMACSL_REG_MAXLEN 0x10
+
+#elif defined CONFIG_KSNET_NETCP_V1_5
+
+#define GBETH_BASE (CONFIG_KSNET_NETCP_BASE + 0x00200000)
+#define CPGMACSL_REG_RX_PRI_MAP 0x020
+#define EMAC_EMACSL_BASE_ADDR (GBETH_BASE + 0x22000)
+#define EMAC_MDIO_BASE_ADDR (GBETH_BASE + 0x00f00)
+#define EMAC_SGMII_BASE_ADDR (GBETH_BASE + 0x00100)
+#define DEVICE_EMACSL_BASE(x) (EMAC_EMACSL_BASE_ADDR + (x) * 0x1000)
+
+/* Register offsets */
+#define CPGMACSL_REG_CTL 0x330
+#define CPGMACSL_REG_STATUS 0x334
+#define CPGMACSL_REG_RESET 0x338
+#define CPGMACSL_REG_MAXLEN 0x024
+
+#endif
+
+#define KEYSTONE2_EMAC_GIG_ENABLE
+
+#define MAC_ID_BASE_ADDR CONFIG_KSNET_MAC_ID_BASE
+
+/* MDIO module input frequency */
+#define EMAC_MDIO_BUS_FREQ (clk_get_rate(pass_pll_clk))
+/* MDIO clock output frequency */
+#define EMAC_MDIO_CLOCK_FREQ 2500000 /* 2.5 MHz */
+
+/* MII Status Register */
+#define MII_STATUS_REG 1
+#define MII_STATUS_LINK_MASK 0x4
+
+#define MDIO_CONTROL_IDLE 0x80000000
+#define MDIO_CONTROL_ENABLE 0x40000000
+#define MDIO_CONTROL_FAULT_ENABLE 0x40000
+#define MDIO_CONTROL_FAULT 0x80000
+#define MDIO_USERACCESS0_GO 0x80000000
+#define MDIO_USERACCESS0_WRITE_READ 0x0
+#define MDIO_USERACCESS0_WRITE_WRITE 0x40000000
+#define MDIO_USERACCESS0_ACK 0x20000000
+
+#define EMAC_MACCONTROL_MIIEN_ENABLE 0x20
+#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE 0x1
+#define EMAC_MACCONTROL_GIGABIT_ENABLE BIT(7)
+#define EMAC_MACCONTROL_GIGFORCE BIT(17)
+#define EMAC_MACCONTROL_RMIISPEED_100 BIT(15)
+
+#define EMAC_MIN_ETHERNET_PKT_SIZE 60
+
+struct mac_sl_cfg {
+ u_int32_t max_rx_len; /* Maximum receive packet length. */
+ u_int32_t ctl; /* Control bitfield */
+};
+
+/**
+ * Definition: Control bitfields used in the ctl field of mac_sl_cfg
+ */
+#define GMACSL_RX_ENABLE_RCV_CONTROL_FRAMES BIT(24)
+#define GMACSL_RX_ENABLE_RCV_SHORT_FRAMES BIT(23)
+#define GMACSL_RX_ENABLE_RCV_ERROR_FRAMES BIT(22)
+#define GMACSL_RX_ENABLE_EXT_CTL BIT(18)
+#define GMACSL_RX_ENABLE_GIG_FORCE BIT(17)
+#define GMACSL_RX_ENABLE_IFCTL_B BIT(16)
+#define GMACSL_RX_ENABLE_IFCTL_A BIT(15)
+#define GMACSL_RX_ENABLE_CMD_IDLE BIT(11)
+#define GMACSL_TX_ENABLE_SHORT_GAP BIT(10)
+#define GMACSL_ENABLE_GIG_MODE BIT(7)
+#define GMACSL_TX_ENABLE_PACE BIT(6)
+#define GMACSL_ENABLE BIT(5)
+#define GMACSL_TX_ENABLE_FLOW_CTL BIT(4)
+#define GMACSL_RX_ENABLE_FLOW_CTL BIT(3)
+#define GMACSL_ENABLE_LOOPBACK BIT(1)
+#define GMACSL_ENABLE_FULL_DUPLEX BIT(0)
+
+/* EMAC SL function return values */
+#define GMACSL_RET_OK 0
+#define GMACSL_RET_INVALID_PORT -1
+#define GMACSL_RET_WARN_RESET_INCOMPLETE -2
+#define GMACSL_RET_WARN_MAXLEN_TOO_BIG -3
+#define GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE -4
+
+/* EMAC SL register definitions */
+#define DEVICE_EMACSL_RESET_POLL_COUNT 100
+
+/* Soft reset register values */
+#define CPGMAC_REG_RESET_VAL_RESET_MASK BIT(0)
+#define CPGMAC_REG_RESET_VAL_RESET BIT(0)
+#define CPGMAC_REG_MAXLEN_LEN 0x3fff
+
+/* CPSW */
+/* Control bitfields */
+#define CPSW_CTL_P2_PASS_PRI_TAGGED BIT(5)
+#define CPSW_CTL_P1_PASS_PRI_TAGGED BIT(4)
+#define CPSW_CTL_P0_PASS_PRI_TAGGED BIT(3)
+#define CPSW_CTL_P0_ENABLE BIT(2)
+#define CPSW_CTL_VLAN_AWARE BIT(1)
+#define CPSW_CTL_FIFO_LOOPBACK BIT(0)
+
+#define DEVICE_CPSW_NUM_PORTS CONFIG_KSNET_CPSW_NUM_PORTS
+#define DEVICE_N_GMACSL_PORTS (DEVICE_CPSW_NUM_PORTS - 1)
+
+#ifdef CONFIG_KSNET_NETCP_V1_0
+
+#define DEVICE_CPSW_BASE (GBETH_BASE + 0x800)
+#define CPSW_REG_CTL 0x004
+#define CPSW_REG_STAT_PORT_EN 0x00c
+#define CPSW_REG_MAXLEN 0x040
+#define CPSW_REG_ALE_CONTROL 0x608
+#define CPSW_REG_ALE_PORTCTL(x) (0x640 + (x) * 4)
+#define CPSW_REG_VAL_STAT_ENABLE_ALL 0xf
+
+#elif defined CONFIG_KSNET_NETCP_V1_5
+
+#define DEVICE_CPSW_BASE (GBETH_BASE + 0x20000)
+#define CPSW_REG_CTL 0x00004
+#define CPSW_REG_STAT_PORT_EN 0x00014
+#define CPSW_REG_MAXLEN 0x01024
+#define CPSW_REG_ALE_CONTROL 0x1e008
+#define CPSW_REG_ALE_PORTCTL(x) (0x1e040 + (x) * 4)
+#define CPSW_REG_VAL_STAT_ENABLE_ALL 0x1ff
+
+#endif
+
+#define CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE ((u_int32_t)0xc0000000)
+#define CPSW_REG_VAL_ALE_CTL_BYPASS ((u_int32_t)0x00000010)
+#define CPSW_REG_VAL_PORTCTL_FORWARD_MODE 0x3
+
+#define target_get_switch_ctl() CPSW_CTL_P0_ENABLE
+#define SWITCH_MAX_PKT_SIZE 9000
+
+/* SGMII */
+#define SGMII_REG_STATUS_LOCK BIT(4)
+#define SGMII_REG_STATUS_LINK BIT(0)
+#define SGMII_REG_STATUS_AUTONEG BIT(2)
+#define SGMII_REG_CONTROL_AUTONEG BIT(0)
+#define SGMII_REG_CONTROL_MASTER BIT(5)
+#define SGMII_REG_MR_ADV_ENABLE BIT(0)
+#define SGMII_REG_MR_ADV_LINK BIT(15)
+#define SGMII_REG_MR_ADV_FULL_DUPLEX BIT(12)
+#define SGMII_REG_MR_ADV_GIG_MODE BIT(11)
+
+#define SGMII_LINK_MAC_MAC_AUTONEG 0
+#define SGMII_LINK_MAC_PHY 1
+#define SGMII_LINK_MAC_MAC_FORCED 2
+#define SGMII_LINK_MAC_FIBER 3
+#define SGMII_LINK_MAC_PHY_FORCED 4
+
+#ifdef CONFIG_KSNET_NETCP_V1_0
+#define SGMII_OFFSET(x) ((x <= 1) ? (x * 0x100) : ((x * 0x100) + 0x100))
+#elif defined CONFIG_KSNET_NETCP_V1_5
+#define SGMII_OFFSET(x) ((x) * 0x100)
+#endif
+
+#define SGMII_IDVER_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x000)
+#define SGMII_SRESET_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x004)
+#define SGMII_CTL_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x010)
+#define SGMII_STATUS_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x014)
+#define SGMII_MRADV_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x018)
+#define SGMII_LPADV_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x020)
+#define SGMII_TXCFG_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x030)
+#define SGMII_RXCFG_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x034)
+#define SGMII_AUXCFG_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x038)
+
+/* PSS */
+#ifdef CONFIG_KSNET_NETCP_V1_0
+
+#define DEVICE_PSTREAM_CFG_REG_ADDR (CONFIG_KSNET_NETCP_BASE + 0x604)
+#define DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI 0x06060606
+#define hw_config_streaming_switch()\
+ writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI, DEVICE_PSTREAM_CFG_REG_ADDR);
+
+#elif defined CONFIG_KSNET_NETCP_V1_5
+
+#define DEVICE_PSTREAM_CFG_REG_ADDR (CONFIG_KSNET_NETCP_BASE + 0x500)
+#define DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI 0x0
+
+#define hw_config_streaming_switch()\
+ writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\
+ DEVICE_PSTREAM_CFG_REG_ADDR);\
+ writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\
+ DEVICE_PSTREAM_CFG_REG_ADDR+4);\
+ writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\
+ DEVICE_PSTREAM_CFG_REG_ADDR+8);\
+ writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\
+ DEVICE_PSTREAM_CFG_REG_ADDR+12);
+
+#endif
+
+/* EMAC MDIO Registers Structure */
+struct mdio_regs {
+ u32 version;
+ u32 control;
+ u32 alive;
+ u32 link;
+ u32 linkintraw;
+ u32 linkintmasked;
+ u32 rsvd0[2];
+ u32 userintraw;
+ u32 userintmasked;
+ u32 userintmaskset;
+ u32 userintmaskclear;
+ u32 rsvd1[20];
+ u32 useraccess0;
+ u32 userphysel0;
+ u32 useraccess1;
+ u32 userphysel1;
+};
+
+struct eth_priv_t {
+ char int_name[32];
+ int rx_flow;
+ int phy_addr;
+ int slave_port;
+ int sgmii_link_type;
+ struct phy_device *phy_dev;
+};
+
+int keystone2_emac_initialize(struct eth_priv_t *eth_priv);
+void sgmii_serdes_setup_156p25mhz(void);
+void sgmii_serdes_shutdown(void);
+
+#endif /* _KEYSTONE_NET_H_ */
diff --git a/arch/arm/include/asm/ti-common/keystone_serdes.h b/arch/arm/include/asm/ti-common/keystone_serdes.h
new file mode 100644
index 0000000..2e92411
--- /dev/null
+++ b/arch/arm/include/asm/ti-common/keystone_serdes.h
@@ -0,0 +1,55 @@
+/*
+ * Texas Instruments Keystone SerDes driver
+ *
+ * (C) Copyright 2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __TI_KEYSTONE_SERDES_H__
+#define __TI_KEYSTONE_SERDES_H__
+
+/* SERDES Reference clock */
+enum ks2_serdes_clock {
+ SERDES_CLOCK_100M, /* 100 MHz */
+ SERDES_CLOCK_122P88M, /* 122.88 MHz */
+ SERDES_CLOCK_125M, /* 125 MHz */
+ SERDES_CLOCK_156P25M, /* 156.25 MHz */
+ SERDES_CLOCK_312P5M, /* 312.5 MHz */
+};
+
+/* SERDES Lane Baud Rate */
+enum ks2_serdes_rate {
+ SERDES_RATE_4P9152G, /* 4.9152 GBaud */
+ SERDES_RATE_5G, /* 5 GBaud */
+ SERDES_RATE_6P144G, /* 6.144 GBaud */
+ SERDES_RATE_6P25G, /* 6.25 GBaud */
+ SERDES_RATE_10p3125g, /* 10.3215 GBaud */
+ SERDES_RATE_12p5g, /* 12.5 GBaud */
+};
+
+/* SERDES Lane Rate Mode */
+enum ks2_serdes_rate_mode {
+ SERDES_FULL_RATE,
+ SERDES_HALF_RATE,
+ SERDES_QUARTER_RATE,
+};
+
+/* SERDES PHY TYPE */
+enum ks2_serdes_interface {
+ SERDES_PHY_SGMII,
+ SERDES_PHY_PCSR, /* XGE SERDES */
+};
+
+struct ks2_serdes {
+ enum ks2_serdes_clock clk;
+ enum ks2_serdes_rate rate;
+ enum ks2_serdes_rate_mode rate_mode;
+ enum ks2_serdes_interface intf;
+ u32 loopback;
+};
+
+int ks2_serdes_init(u32 base, struct ks2_serdes *serdes, u32 num_lanes);
+
+#endif /* __TI_KEYSTONE_SERDES_H__ */
diff --git a/arch/arm/include/asm/ti-common/ti-edma3.h b/arch/arm/include/asm/ti-common/ti-edma3.h
new file mode 100644
index 0000000..5adc1da
--- /dev/null
+++ b/arch/arm/include/asm/ti-common/ti-edma3.h
@@ -0,0 +1,121 @@
+/*
+ * Enhanced Direct Memory Access (EDMA3) Controller
+ *
+ * (C) Copyright 2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _EDMA3_H_
+#define _EDMA3_H_
+
+#include <linux/stddef.h>
+
+#define EDMA3_PARSET_NULL_LINK 0xffff
+
+/*
+ * All parameter RAM set options
+ * opt field in edma3_param_set_config structure
+ */
+#define EDMA3_SLOPT_PRIV_LEVEL BIT(31)
+#define EDMA3_SLOPT_PRIV_ID(id) ((0xf & (id)) << 24)
+#define EDMA3_SLOPT_INTERM_COMP_CHAIN_ENB BIT(23)
+#define EDMA3_SLOPT_TRANS_COMP_CHAIN_ENB BIT(22)
+#define EDMA3_SLOPT_INTERM_COMP_INT_ENB BIT(21)
+#define EDMA3_SLOPT_TRANS_COMP_INT_ENB BIT(20)
+#define EDMA3_SLOPT_COMP_CODE(code) ((0x3f & (code)) << 12)
+#define EDMA3_SLOPT_FIFO_WIDTH_8 0
+#define EDMA3_SLOPT_FIFO_WIDTH_16 (1 << 8)
+#define EDMA3_SLOPT_FIFO_WIDTH_32 (2 << 8)
+#define EDMA3_SLOPT_FIFO_WIDTH_64 (3 << 8)
+#define EDMA3_SLOPT_FIFO_WIDTH_128 (4 << 8)
+#define EDMA3_SLOPT_FIFO_WIDTH_256 (5 << 8)
+#define EDMA3_SLOPT_FIFO_WIDTH_SET(w) ((w & 0x7) << 8)
+#define EDMA3_SLOPT_STATIC BIT(3)
+#define EDMA3_SLOPT_AB_SYNC BIT(2)
+#define EDMA3_SLOPT_DST_ADDR_CONST_MODE BIT(1)
+#define EDMA3_SLOPT_SRC_ADDR_CONST_MODE BIT(0)
+
+enum edma3_address_mode {
+ INCR = 0,
+ FIFO = 1
+};
+
+enum edma3_fifo_width {
+ W8BIT = 0,
+ W16BIT = 1,
+ W32BIT = 2,
+ W64BIT = 3,
+ W128BIT = 4,
+ W256BIT = 5
+};
+
+enum edma3_sync_dimension {
+ ASYNC = 0,
+ ABSYNC = 1
+};
+
+/* PaRAM slots are laid out like this */
+struct edma3_slot_layout {
+ u32 opt;
+ u32 src;
+ u32 a_b_cnt;
+ u32 dst;
+ u32 src_dst_bidx;
+ u32 link_bcntrld;
+ u32 src_dst_cidx;
+ u32 ccnt;
+} __packed;
+
+/*
+ * Use this to assign trigger word number of edma3_slot_layout struct.
+ * trigger_word_name - is the exact name from edma3_slot_layout.
+ */
+#define EDMA3_TWORD(trigger_word_name)\
+ (offsetof(struct edma3_slot_layout, trigger_word_name) / 4)
+
+struct edma3_slot_config {
+ u32 opt;
+ u32 src;
+ u32 dst;
+ int bcnt;
+ int acnt;
+ int ccnt;
+ int src_bidx;
+ int dst_bidx;
+ int src_cidx;
+ int dst_cidx;
+ int bcntrld;
+ int link;
+};
+
+struct edma3_channel_config {
+ int slot;
+ int chnum;
+ int complete_code; /* indicate pending complete interrupt */
+ int trigger_slot_word; /* only used for qedma */
+};
+
+void qedma3_start(u32 base, struct edma3_channel_config *cfg);
+void qedma3_stop(u32 base, struct edma3_channel_config *cfg);
+void edma3_slot_configure(u32 base, int slot, struct edma3_slot_config *cfg);
+int edma3_check_for_transfer(u32 base, struct edma3_channel_config *cfg);
+void edma3_write_slot(u32 base, int slot, struct edma3_slot_layout *param);
+void edma3_read_slot(u32 base, int slot, struct edma3_slot_layout *param);
+
+void edma3_set_dest(u32 base, int slot, u32 dst, enum edma3_address_mode mode,
+ enum edma3_fifo_width width);
+void edma3_set_dest_index(u32 base, unsigned slot, int bidx, int cidx);
+void edma3_set_dest_addr(u32 base, int slot, u32 dst);
+
+void edma3_set_src(u32 base, int slot, u32 src, enum edma3_address_mode mode,
+ enum edma3_fifo_width width);
+void edma3_set_src_index(u32 base, unsigned slot, int bidx, int cidx);
+void edma3_set_src_addr(u32 base, int slot, u32 src);
+
+void edma3_set_transfer_params(u32 base, int slot, int acnt,
+ int bcnt, int ccnt, u16 bcnt_rld,
+ enum edma3_sync_dimension sync_mode);
+
+#endif
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 0d19c8a..cdb1975 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -23,6 +23,8 @@
#include <asm/bootm.h>
#include <asm/secure.h>
#include <linux/compiler.h>
+#include <bootm.h>
+#include <vxworks.h>
#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
#include <asm/armv7.h>
@@ -300,7 +302,8 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)
* DIFFERENCE: Instead of calling prep and go at the end
* they are called if subcommand is equal 0.
*/
-int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+int do_bootm_linux(int flag, int argc, char * const argv[],
+ bootm_headers_t *images)
{
/* No need for those on ARM */
if (flag & BOOTM_STATE_OS_BD_T || flag & BOOTM_STATE_OS_CMDLINE)
diff --git a/board/8dtech/eco5pk/eco5pk.h b/board/8dtech/eco5pk/eco5pk.h
index a794764..acf2b80 100644
--- a/board/8dtech/eco5pk/eco5pk.h
+++ b/board/8dtech/eco5pk/eco5pk.h
@@ -332,7 +332,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
/* JTAG */\
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \
diff --git a/board/bachmann/ot1200/Kconfig b/board/bachmann/ot1200/Kconfig
index 55a825d..6cf2573 100644
--- a/board/bachmann/ot1200/Kconfig
+++ b/board/bachmann/ot1200/Kconfig
@@ -1,23 +1,18 @@
if TARGET_OT1200
config SYS_CPU
- string
default "armv7"
config SYS_BOARD
- string
default "ot1200"
config SYS_VENDOR
- string
default "bachmann"
config SYS_SOC
- string
default "mx6"
config SYS_CONFIG_NAME
- string
default "ot1200"
endif
diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c
index 0d5ede5..acf95cb 100644
--- a/board/bachmann/ot1200/ot1200.c
+++ b/board/bachmann/ot1200/ot1200.c
@@ -12,6 +12,7 @@
#include <malloc.h>
#include <asm/arch/mx6-pins.h>
#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/sata.h>
#include <asm/imx-common/mxc_i2c.h>
#include <asm/imx-common/boot_mode.h>
#include <asm/arch/crm_regs.h>
@@ -98,6 +99,11 @@ static void setup_iomux_spi(void)
imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
}
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return (bus == 2 && cs == 0) ? (IMX_GPIO_NR(1, 3)) : -1;
+}
+
int board_early_init_f(void)
{
setup_iomux_uart();
@@ -225,6 +231,10 @@ int board_init(void)
/* enable ecspi3 clocks */
enable_cspi_clock(1, 2);
+#ifdef CONFIG_CMD_SATA
+ setup_sata();
+#endif
+
return 0;
}
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 951b820..fcd4d82 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -18,6 +18,7 @@
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/mxc_i2c.h>
#include <asm/imx-common/sata.h>
+#include <asm/imx-common/spi.h>
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/video.h>
#include <mmc.h>
diff --git a/board/compulab/cm_fx6/common.c b/board/compulab/cm_fx6/common.c
index 1f39679..59c9d1a 100644
--- a/board/compulab/cm_fx6/common.c
+++ b/board/compulab/cm_fx6/common.c
@@ -11,6 +11,7 @@
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
+#include <asm/imx-common/spi.h>
#include <fsl_esdhc.h>
#include "common.h"
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index 0944903..d0b0930 100644
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -53,16 +53,6 @@ static u32 gpmc_net_config[GPMC_MAX_REG] = {
0
};
-static u32 gpmc_nand_config[GPMC_MAX_REG] = {
- M_NAND_GPMC_CONFIG1,
- M_NAND_GPMC_CONFIG2,
- M_NAND_GPMC_CONFIG3,
- M_NAND_GPMC_CONFIG4,
- M_NAND_GPMC_CONFIG5,
- M_NAND_GPMC_CONFIG6,
- 0,
-};
-
#ifdef CONFIG_LCD
#ifdef CONFIG_CMD_NAND
static int splash_load_from_nand(u32 bmp_load_addr)
@@ -148,9 +138,6 @@ int board_init(void)
{
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
- enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[0],
- CONFIG_SYS_NAND_BASE, GPMC_SIZE_16M);
-
/* board id for Linux */
if (get_cpu_family() == CPU_OMAP34XX)
gd->bd->bi_arch_number = MACH_TYPE_CM_T35;
@@ -381,7 +368,7 @@ static void cm_t3x_set_common_muxconf(void)
MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)); /*OFF_MODE*/
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)); /*CLKOUT1*/
MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4)); /*green LED*/
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)); /*JTAG_nTRST*/
+ MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)); /*JTAG_NTRST*/
MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)); /*JTAG_TCK*/
MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)); /*JTAG_TMS*/
MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)); /*JTAG_TDI*/
@@ -457,6 +444,8 @@ void set_muxconf_regs(void)
}
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+#define SB_T35_WP_GPIO 59
+
int board_mmc_getcd(struct mmc *mmc)
{
u8 val;
@@ -469,7 +458,7 @@ int board_mmc_getcd(struct mmc *mmc)
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0, 0, 0, -1, 59);
+ return omap_mmc_init(0, 0, 0, -1, SB_T35_WP_GPIO);
}
#endif
diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c
index a725f15..02fb3fa 100644
--- a/board/embest/mx6boards/mx6boards.c
+++ b/board/embest/mx6boards/mx6boards.c
@@ -23,6 +23,7 @@
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/mxc_i2c.h>
+#include <asm/imx-common/spi.h>
#include <asm/imx-common/video.h>
#include <i2c.h>
#include <mmc.h>
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index 1cb7561..0dc0160 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -17,12 +17,16 @@
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/mxc_i2c.h>
#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/spi.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/arch/sys_proto.h>
#include <i2c.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/imx-common/video.h>
+#include <asm/arch/crm_regs.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -234,10 +238,65 @@ u32 get_board_rev(void)
return (get_cpu_rev() & ~(0xF << 8)) | rev;
}
+#if defined(CONFIG_VIDEO_IPUV3)
+static void do_enable_hdmi(struct display_info_t const *dev)
+{
+ imx_enable_hdmi_phy();
+}
+
+struct display_info_t const displays[] = {{
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = detect_hdmi,
+ .enable = do_enable_hdmi,
+ .mode = {
+ .name = "HDMI",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED,
+} } };
+size_t display_count = ARRAY_SIZE(displays);
+
+static void setup_display(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ int reg;
+
+ enable_ipu_clock();
+ imx_setup_hdmi();
+
+ reg = readl(&mxc_ccm->chsccdr);
+ reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+ << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->chsccdr);
+}
+#endif /* CONFIG_VIDEO_IPUV3 */
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+ return 1;
+}
+
int board_early_init_f(void)
{
setup_iomux_uart();
-
+#ifdef CONFIG_VIDEO_IPUV3
+ setup_display();
+#endif
return 0;
}
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index a0832f4..a500133 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -13,6 +13,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/spi.h>
#include <asm/io.h>
#include <linux/sizes.h>
#include <common.h>
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 1038d9d..df491a8 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -20,6 +20,7 @@
#include <asm/imx-common/mxc_i2c.h>
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/sata.h>
+#include <asm/imx-common/spi.h>
#include <asm/imx-common/video.h>
#include <jffs2/load_kernel.h>
#include <hwconfig.h>
diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
index 137e4ed..6ba55cd 100644
--- a/board/genesi/mx51_efikamx/efikamx.c
+++ b/board/genesi/mx51_efikamx/efikamx.c
@@ -14,6 +14,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
+#include <asm/imx-common/spi.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h
index 17c122c..d6c5df2 100644
--- a/board/htkw/mcx/mcx.h
+++ b/board/htkw/mcx/mcx.h
@@ -339,7 +339,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M4))\
MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4))\
/* JTAG */\
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(JTAG_NTRST), (IEN | PTU | EN | M4)) \
MUX_VAL(CP(JTAG_TCK), (IEN | PTU | EN | M4)) \
MUX_VAL(CP(JTAG_TMS), (IEN | PTU | EN | M4)) \
MUX_VAL(CP(JTAG_TDI), (IEN | PTU | EN | M4)) \
diff --git a/board/logicpd/am3517evm/am3517evm.h b/board/logicpd/am3517evm/am3517evm.h
index d407d66..a6a55ee 100644
--- a/board/logicpd/am3517evm/am3517evm.h
+++ b/board/logicpd/am3517evm/am3517evm.h
@@ -333,7 +333,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
/* JTAG */\
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 075fe94..1fd9f2c 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -230,6 +230,6 @@ void set_muxconf_regs(void)
MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0));
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0));
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0));
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0));
MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0));
}
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 7506820..dfb8602 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -27,12 +27,19 @@
#include <asm/mach-types.h>
#include "overo.h"
+#ifdef CONFIG_USB_EHCI
+#include <usb.h>
+#include <asm/ehci-omap.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
#define TWL4030_I2C_BUS 0
#define EXPANSION_EEPROM_I2C_BUS 2
#define EXPANSION_EEPROM_I2C_ADDRESS 0x51
+#define GUMSTIX_EMPTY_EEPROM 0x0
+
#define GUMSTIX_SUMMIT 0x01000200
#define GUMSTIX_TOBI 0x02000200
#define GUMSTIX_TOBI_DUO 0x03000200
@@ -58,22 +65,7 @@ static struct {
char fab_revision[8];
char env_var[16];
char env_setting[64];
-} expansion_config;
-
-#if defined(CONFIG_CMD_NET)
-static void setup_net_chip(void);
-#endif
-
-/* GPMC definitions for LAN9221 chips on Tobi expansion boards */
-static const u32 gpmc_lan_config[] = {
- NET_LAN9221_GPMC_CONFIG1,
- NET_LAN9221_GPMC_CONFIG2,
- NET_LAN9221_GPMC_CONFIG3,
- NET_LAN9221_GPMC_CONFIG4,
- NET_LAN9221_GPMC_CONFIG5,
- NET_LAN9221_GPMC_CONFIG6,
- /*CONFIG7- computed as params */
-};
+} expansion_config = {0x0};
static const struct ns16550_platdata overo_serial = {
OMAP34XX_UART3,
@@ -226,6 +218,9 @@ int get_sdio2_config(void)
*/
unsigned int get_expansion_id(void)
{
+ if (expansion_config.device_vendor != 0x0)
+ return expansion_config.device_vendor;
+
i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
/* return GUMSTIX_NO_EEPROM if eeprom doesn't respond */
@@ -254,10 +249,6 @@ int misc_init_r(void)
twl4030_power_init();
twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
-#if defined(CONFIG_CMD_NET)
- setup_net_chip();
-#endif
-
printf("Board revision: %d\n", get_board_revision());
switch (get_sdio2_config()) {
@@ -279,6 +270,7 @@ int misc_init_r(void)
printf("Recognized Summit expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ MUX_GUMSTIX();
setenv("defaultdisplay", "dvi");
setenv("expansionname", "summit");
break;
@@ -286,6 +278,7 @@ int misc_init_r(void)
printf("Recognized Tobi expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ MUX_GUMSTIX();
setenv("defaultdisplay", "dvi");
setenv("expansionname", "tobi");
break;
@@ -293,20 +286,20 @@ int misc_init_r(void)
printf("Recognized Tobi Duo expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
- /* second lan chip */
- enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4],
- 0x2B000000, GPMC_SIZE_16M);
+ MUX_GUMSTIX();
break;
case GUMSTIX_PALO35:
printf("Recognized Palo35 expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ MUX_GUMSTIX();
setenv("defaultdisplay", "lcd35");
break;
case GUMSTIX_PALO43:
printf("Recognized Palo43 expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ MUX_GUMSTIX();
setenv("defaultdisplay", "lcd43");
setenv("expansionname", "palo43");
break;
@@ -314,6 +307,7 @@ int misc_init_r(void)
printf("Recognized Chestnut43 expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ MUX_GUMSTIX();
setenv("defaultdisplay", "lcd43");
setenv("expansionname", "chestnut43");
break;
@@ -321,11 +315,13 @@ int misc_init_r(void)
printf("Recognized Pinto expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ MUX_GUMSTIX();
break;
case GUMSTIX_GALLOP43:
printf("Recognized Gallop43 expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ MUX_GUMSTIX();
setenv("defaultdisplay", "lcd43");
setenv("expansionname", "gallop43");
break;
@@ -333,6 +329,7 @@ int misc_init_r(void)
printf("Recognized Alto35 expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ MUX_GUMSTIX();
MUX_ALTO35();
setenv("defaultdisplay", "lcd35");
setenv("expansionname", "alto35");
@@ -341,21 +338,25 @@ int misc_init_r(void)
printf("Recognized Stagecoach expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ MUX_GUMSTIX();
break;
case GUMSTIX_THUMBO:
printf("Recognized Thumbo expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ MUX_GUMSTIX();
break;
case GUMSTIX_TURTLECORE:
printf("Recognized Turtlecore expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ MUX_GUMSTIX();
break;
case GUMSTIX_ARBOR43C:
printf("Recognized Arbor43C expansion board (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ MUX_GUMSTIX();
MUX_ARBOR43C();
setenv("defaultdisplay", "lcd43");
break;
@@ -363,16 +364,17 @@ int misc_init_r(void)
printf("Recognized Ettus Research USRP-E (rev %d %s)\n",
expansion_config.revision,
expansion_config.fab_revision);
+ MUX_GUMSTIX();
MUX_USRP_E();
setenv("defaultdisplay", "dvi");
break;
case GUMSTIX_NO_EEPROM:
- puts("No EEPROM on expansion board\n");
+ case GUMSTIX_EMPTY_EEPROM:
+ puts("No or empty EEPROM on expansion board\n");
+ MUX_GUMSTIX();
setenv("expansionname", "tobi");
break;
default:
- if (expansion_id == 0x0)
- setenv("expansionname", "tobi");
printf("Unrecognized expansion board 0x%08x\n", expansion_id);
break;
}
@@ -401,7 +403,18 @@ void set_muxconf_regs(void)
MUX_OVERO();
}
-#if defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET) && !defined(CONFIG_SPL_BUILD)
+/* GPMC definitions for LAN9221 chips on Tobi expansion boards */
+static const u32 gpmc_lan_config[] = {
+ NET_LAN9221_GPMC_CONFIG1,
+ NET_LAN9221_GPMC_CONFIG2,
+ NET_LAN9221_GPMC_CONFIG3,
+ NET_LAN9221_GPMC_CONFIG4,
+ NET_LAN9221_GPMC_CONFIG5,
+ NET_LAN9221_GPMC_CONFIG6,
+ /*CONFIG7- computed as params */
+};
+
/*
* Routine: setup_net_chip
* Description: Setting up the configuration GPMC registers specific to the
@@ -411,10 +424,6 @@ static void setup_net_chip(void)
{
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
- /* first lan chip */
- enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
- GPMC_SIZE_16M);
-
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
@@ -422,7 +431,14 @@ static void setup_net_chip(void)
/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
&ctrl_base->gpmc_nadv_ale);
+}
+/*
+ * Routine: reset_net_chip
+ * Description: Reset the Ethernet hardware.
+ */
+static void reset_net_chip(void)
+{
/* Make GPIO 64 as output pin and send a magic pulse through it */
if (!gpio_request(64, "")) {
gpio_direction_output(64, 0);
@@ -433,16 +449,42 @@ static void setup_net_chip(void)
gpio_set_value(64, 1);
}
}
-#endif
int board_eth_init(bd_t *bis)
{
+ unsigned int expansion_id;
int rc = 0;
+
#ifdef CONFIG_SMC911X
- rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+ expansion_id = get_expansion_id();
+ switch (expansion_id) {
+ case GUMSTIX_TOBI_DUO:
+ /* second lan chip */
+ enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4],
+ 0x2B000000, GPMC_SIZE_16M);
+ /* no break */
+ case GUMSTIX_TOBI:
+ case GUMSTIX_CHESTNUT43:
+ case GUMSTIX_STAGECOACH:
+ case GUMSTIX_NO_EEPROM:
+ case GUMSTIX_EMPTY_EEPROM:
+ /* first lan chip */
+ enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5],
+ 0x2C000000, GPMC_SIZE_16M);
+
+ setup_net_chip();
+ reset_net_chip();
+
+ rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+ break;
+ default:
+ break;
+ }
#endif
+
return rc;
}
+#endif
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
@@ -450,3 +492,32 @@ int board_mmc_init(bd_t *bis)
return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
+
+#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
+static struct omap_usbhs_board_data usbhs_bdata = {
+ .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+ .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
+};
+
+#define GUMSTIX_GPIO_USBH_CPEN 168
+int ehci_hcd_init(int index, enum usb_init_type init,
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+ /* Enable USB power */
+ if (!gpio_request(GUMSTIX_GPIO_USBH_CPEN, "usbh_cpen"))
+ gpio_direction_output(GUMSTIX_GPIO_USBH_CPEN, 1);
+
+ return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
+}
+
+int ehci_hcd_stop(void)
+{
+ /* Disable USB power */
+ gpio_set_value(GUMSTIX_GPIO_USBH_CPEN, 0);
+ gpio_free(GUMSTIX_GPIO_USBH_CPEN);
+
+ return omap_ehci_hcd_stop();
+}
+
+#endif /* CONFIG_USB_EHCI */
diff --git a/board/overo/overo.h b/board/overo/overo.h
index 57725d8..d0edf86 100644
--- a/board/overo/overo.h
+++ b/board/overo/overo.h
@@ -101,13 +101,9 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\
MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\
MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\
- MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\
MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\
MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M4)) /*GPIO_54*/\
/* - MMC1_WP*/\
- MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\
- MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\
- MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) /*GPMC_nCS6*/\
MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M0)) /*GPMC_nCS7*/\
MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nCS3*/\
MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M0)) /*GPMC_CLK*/\
@@ -117,45 +113,11 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\
MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\
MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\
- /* - SMSC911X_NRES*/\
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | DIS | M4)) /*GPIO_65*/\
- /*DSS*/\
- MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
- MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
- MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
- MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
- MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
- MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
- MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
- MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
- MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
- MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
- MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
- MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
- MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
- MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
- MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
- MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
- MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
- MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
- MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
- MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
- MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
- MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
- MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
- MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
- MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
- MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
- MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
- MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
/*CAMERA*/\
MUX_VAL(CP(CAM_HS), (IEN | PTU | DIS | M0)) /*CAM_HS */\
MUX_VAL(CP(CAM_VS), (IEN | PTU | DIS | M0)) /*CAM_VS */\
MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\
MUX_VAL(CP(CAM_PCLK), (IEN | PTU | DIS | M0)) /*CAM_PCLK*/\
- MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*CAM_FLD*/\
MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\
MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\
MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\
@@ -168,13 +130,8 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\
MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\
MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\
- MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
- MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M0)) /*CAM_WEN*/\
- MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
MUX_VAL(CP(CSI2_DX0), (IEN | PTD | EN | M4)) /*GPIO_112*/\
MUX_VAL(CP(CSI2_DY0), (IEN | PTD | EN | M4)) /*GPIO_113*/\
- MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) /*GPIO_114*/\
- /* - PEN_DOWN*/\
MUX_VAL(CP(CSI2_DY1), (IEN | PTD | EN | M4)) /*GPIO_115*/\
/*Audio Interface */\
MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\
@@ -208,14 +165,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\
MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1)) /*UART2_RX*/\
- MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4)) /*GPIO_144 - LCD_EN*/\
- MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4)) /*GPIO_145*/\
- MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4)) /*GPIO_146*/\
- MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/\
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
MUX_VAL(CP(UART1_RTS), (IEN | PTU | DIS | M4)) /*GPIO_149*/ \
- MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M4)) /*GPIO_150-MMC3_WP*/\
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\
MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M0)) /*McBSP4_CLKX*/\
MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M0)) /*McBSP4_DR*/\
MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M0)) /*McBSP4_DX*/\
@@ -228,7 +178,6 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) /*McBSP1_FSX*/\
MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) /*McBSP1_CLKX*/\
/*Serial Interface*/\
- MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX*/\
MUX_VAL(CP(UART3_RTS_SD), (IEN | PTU | EN | M4)) /*GPIO_164 W2W_*/\
/* BT_NRESET*/\
MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTU | EN | M0)) /*UART3_RX_IRRX*/\
@@ -255,14 +204,6 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\
MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\
MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\
- MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*HDQ_SIO*/\
- MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) /*McSPI1_CLK*/\
- MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) /*McSPI1_SIMO */\
- MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOMI */\
- MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\
- MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\
- MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176 */\
- /* - LAN_INTR */\
MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA2*/\
MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA7*/\
MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA4*/\
@@ -281,21 +222,9 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\
MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\
MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
- MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4)) /*GPIO_10*/\
- MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\
- MUX_VAL(CP(ETK_CLK_ES2), (IEN | PTU | EN | M2)) /*MMC3_CLK*/\
- MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\
- MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M4)) /*GPIO_14*/\
MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M4)) /*GPIO_15 - X_GATE*/\
MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | EN | M4)) /*GPIO_16*/\
/* - W2W_NRESET*/\
- MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT3*/\
- MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT0*/\
- MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT1*/\
- MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT2*/\
- MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M4)) /*GPIO_21*/\
- MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | EN | M4)) /*GPIO_22*/\
- MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | EN | M4)) /*GPIO_23*/\
MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\
MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\
MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_DIR*/\
@@ -369,6 +298,85 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/
+#define MUX_GUMSTIX() \
+ /*GPMC*/\
+ MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\
+ MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\
+ MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) /*GPMC_nCS6*/\
+ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4)) /*GPIO_63*/\
+ /* - CAM_IRQ*/\
+ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\
+ /* - SMSC911X_NRES*/\
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | DIS | M4)) /*GPIO_65*/\
+ /*DSS*/\
+ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
+ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
+ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
+ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
+ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
+ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
+ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
+ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
+ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
+ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
+ /*CAMERA*/\
+ MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*CAM_FLD*/\
+ MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
+ MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M0)) /*CAM_WEN*/\
+ MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
+ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) /*GPIO_114*/\
+ /* - PEN_DOWN*/\
+ /*Bluetooth*/\
+ MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4)) /*GPIO_144 - LCD_EN*/\
+ MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4)) /*GPIO_145*/\
+ MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4)) /*GPIO_146*/\
+ MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/\
+ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
+ MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M4)) /*GPIO_150-MMC3_WP*/\
+ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\
+ /*Serial Interface*/\
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX*/\
+ MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*HDQ_SIO*/\
+ MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) /*McSPI1_CLK*/\
+ MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) /*McSPI1_SIMO */\
+ MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOMI */\
+ MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\
+ MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\
+ MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176 */\
+ /* - LAN_INTR */\
+ /*Control and debug */\
+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4)) /*GPIO_10*/\
+ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\
+ MUX_VAL(CP(ETK_CLK_ES2), (IEN | PTU | EN | M2)) /*MMC3_CLK*/\
+ MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\
+ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M4)) /*GPIO_14*/\
+ MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT3*/\
+ MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT0*/\
+ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT1*/\
+ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT2*/\
+ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M4)) /*GPIO_21*/\
+ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | EN | M4)) /*GPIO_22*/\
+ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | EN | M4)) /*GPIO_23*/\
+
#define MUX_OVERO_SDIO2_DIRECT() \
MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
diff --git a/board/pandora/pandora.h b/board/pandora/pandora.h
index cbf4186..268b929 100644
--- a/board/pandora/pandora.h
+++ b/board/pandora/pandora.h
@@ -310,7 +310,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8*/\
MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
/*JTAG*/\
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\
+ MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)) /*JTAG_NTRST*/\
MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\
MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\
MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\
diff --git a/board/technexion/tao3530/tao3530.h b/board/technexion/tao3530/tao3530.h
index daff109..4a94399 100644
--- a/board/technexion/tao3530/tao3530.h
+++ b/board/technexion/tao3530/tao3530.h
@@ -275,7 +275,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \
diff --git a/board/technexion/twister/twister.h b/board/technexion/twister/twister.h
index 62fbfdf..e286bd4 100644
--- a/board/technexion/twister/twister.h
+++ b/board/technexion/twister/twister.h
@@ -337,7 +337,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
/* JTAG */\
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \
diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h
index aba71a8..bc85ad4 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.h
+++ b/board/teejet/mt_ventoux/mt_ventoux.h
@@ -339,7 +339,7 @@ const omap3_sysinfo sysinfo = {
/* gpio_10 */\
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
/* JTAG */\
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index f4bb9f8..680f656 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -359,9 +359,9 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header)
configure_module_pin_mux(i2c1_pin_mux);
configure_module_pin_mux(mii1_pin_mux);
configure_module_pin_mux(mmc0_pin_mux);
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_NAND) && defined(CONFIG_EMMC_BOOT)
configure_module_pin_mux(nand_pin_mux);
-#elif defined(CONFIG_NOR)
+#elif defined(CONFIG_NOR) && defined(CONFIG_EMMC_BOOT)
configure_module_pin_mux(bone_norcape_pin_mux);
#else
configure_module_pin_mux(mmc1_pin_mux);
diff --git a/board/ti/am3517crane/am3517crane.h b/board/ti/am3517crane/am3517crane.h
index e131c8f..6289ca7 100644
--- a/board/ti/am3517crane/am3517crane.h
+++ b/board/ti/am3517crane/am3517crane.h
@@ -284,7 +284,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M4))/*GPIO_10 TP*/\
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0))\
/*JTAG*/\
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0))\
+ MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0))\
MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0))\
MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0))\
MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0))\
diff --git a/board/ti/evm/evm.h b/board/ti/evm/evm.h
index f50193d..91e9b88 100644
--- a/board/ti/evm/evm.h
+++ b/board/ti/evm/evm.h
@@ -300,7 +300,7 @@ static void reset_net_chip(void);
MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) /*SYS_CLKOUT2*/\
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\
+ MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)) /*JTAG_NTRST*/\
MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\
MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\
MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\
diff --git a/board/ti/ks2_evm/Kconfig b/board/ti/ks2_evm/Kconfig
index 9c1e103..96c5f22 100644
--- a/board/ti/ks2_evm/Kconfig
+++ b/board/ti/ks2_evm/Kconfig
@@ -23,3 +23,19 @@ config SYS_CONFIG_NAME
default "k2hk_evm"
endif
+
+if TARGET_K2L_EVM
+
+config SYS_BOARD
+ string
+ default "ks2_evm"
+
+config SYS_VENDOR
+ string
+ default "ti"
+
+config SYS_CONFIG_NAME
+ string
+ default "k2l_evm"
+
+endif
diff --git a/board/ti/ks2_evm/MAINTAINERS b/board/ti/ks2_evm/MAINTAINERS
index 595a80a..87c36c9 100644
--- a/board/ti/ks2_evm/MAINTAINERS
+++ b/board/ti/ks2_evm/MAINTAINERS
@@ -6,3 +6,5 @@ F: include/configs/k2hk_evm.h
F: configs/k2hk_evm_defconfig
F: include/configs/k2e_evm.h
F: configs/k2e_evm_defconfig
+F: include/configs/k2l_evm.h
+F: configs/k2l_evm_defconfig
diff --git a/board/ti/ks2_evm/Makefile b/board/ti/ks2_evm/Makefile
index 00f1164..071dbee 100644
--- a/board/ti/ks2_evm/Makefile
+++ b/board/ti/ks2_evm/Makefile
@@ -11,3 +11,5 @@ obj-$(CONFIG_K2HK_EVM) += board_k2hk.o
obj-$(CONFIG_K2HK_EVM) += ddr3_k2hk.o
obj-$(CONFIG_K2E_EVM) += board_k2e.o
obj-$(CONFIG_K2E_EVM) += ddr3_k2e.o
+obj-$(CONFIG_K2L_EVM) += board_k2l.o
+obj-$(CONFIG_K2L_EVM) += ddr3_k2l.o
diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c
index dfe7be6..4029493 100644
--- a/board/ti/ks2_evm/board.c
+++ b/board/ti/ks2_evm/board.c
@@ -9,11 +9,13 @@
#include "board.h"
#include <common.h>
+#include <spl.h>
#include <exports.h>
#include <fdt_support.h>
#include <asm/arch/ddr3.h>
-#include <asm/arch/emac_defs.h>
+#include <asm/arch/psc_defs.h>
#include <asm/ti-common/ti-aemif.h>
+#include <asm/ti-common/keystone_net.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -38,6 +40,7 @@ int dram_init(void)
gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
CONFIG_MAX_RAM_BANK_SIZE);
aemif_init(ARRAY_SIZE(aemif_configs), aemif_configs);
+ ddr3_init_ecc(KS2_DDR3A_EMIF_CTRL_BASE);
return 0;
}
@@ -68,6 +71,15 @@ int board_eth_init(bd_t *bis)
int port_num;
char link_type_name[32];
+ /* By default, select PA PLL clock as PA clock source */
+ if (psc_enable_module(KS2_LPSC_PA))
+ return -1;
+ if (psc_enable_module(KS2_LPSC_CPGMAC))
+ return -1;
+ if (psc_enable_module(KS2_LPSC_CRYPTO))
+ return -1;
+ pass_pll_pa_clk_enable();
+
port_num = get_num_eth_ports();
for (j = 0; j < port_num; j++) {
@@ -83,6 +95,24 @@ int board_eth_init(bd_t *bis)
}
#endif
+#ifdef CONFIG_SPL_BUILD
+void spl_board_init(void)
+{
+ spl_init_keystone_plls();
+ preloader_console_init();
+}
+
+u32 spl_boot_device(void)
+{
+#if defined(CONFIG_SPL_SPI_LOAD)
+ return BOOT_DEVICE_SPI;
+#else
+ puts("Unknown boot device\n");
+ hang();
+#endif
+}
+#endif
+
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
@@ -225,5 +255,7 @@ void ft_board_setup_ex(void *blob, bd_t *bd)
reserve_start += 2;
}
}
+
+ ddr3_check_ecc_int(KS2_DDR3A_EMIF_CTRL_BASE);
}
#endif
diff --git a/board/ti/ks2_evm/board.h b/board/ti/ks2_evm/board.h
index d91ef73..2bbd792 100644
--- a/board/ti/ks2_evm/board.h
+++ b/board/ti/ks2_evm/board.h
@@ -10,10 +10,11 @@
#ifndef _KS2_BOARD
#define _KS2_BOARD
-#include <asm/arch/emac_defs.h>
+#include <asm/ti-common/keystone_net.h>
extern struct eth_priv_t eth_priv_cfg[];
int get_num_eth_ports(void);
+void spl_init_keystone_plls(void);
#endif
diff --git a/board/ti/ks2_evm/board_k2e.c b/board/ti/ks2_evm/board_k2e.c
index 5472a43..43dfc48 100644
--- a/board/ti/ks2_evm/board_k2e.c
+++ b/board/ti/ks2_evm/board_k2e.c
@@ -10,6 +10,7 @@
#include <common.h>
#include <asm/arch/ddr3.h>
#include <asm/arch/hardware.h>
+#include <asm/ti-common/keystone_net.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -35,10 +36,75 @@ static struct pll_init_data core_pll_config[] = {
CORE_PLL_1500,
};
-
static struct pll_init_data pa_pll_config =
PASS_PLL_1000;
+#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
+struct eth_priv_t eth_priv_cfg[] = {
+ {
+ .int_name = "K2E_EMAC0",
+ .rx_flow = 0,
+ .phy_addr = 0,
+ .slave_port = 1,
+ .sgmii_link_type = SGMII_LINK_MAC_PHY,
+ },
+ {
+ .int_name = "K2E_EMAC1",
+ .rx_flow = 8,
+ .phy_addr = 1,
+ .slave_port = 2,
+ .sgmii_link_type = SGMII_LINK_MAC_PHY,
+ },
+ {
+ .int_name = "K2E_EMAC2",
+ .rx_flow = 16,
+ .phy_addr = 2,
+ .slave_port = 3,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+ {
+ .int_name = "K2E_EMAC3",
+ .rx_flow = 24,
+ .phy_addr = 3,
+ .slave_port = 4,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+ {
+ .int_name = "K2E_EMAC4",
+ .rx_flow = 32,
+ .phy_addr = 4,
+ .slave_port = 5,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+ {
+ .int_name = "K2E_EMAC5",
+ .rx_flow = 40,
+ .phy_addr = 5,
+ .slave_port = 6,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+ {
+ .int_name = "K2E_EMAC6",
+ .rx_flow = 48,
+ .phy_addr = 6,
+ .slave_port = 7,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+ {
+ .int_name = "K2E_EMAC7",
+ .rx_flow = 56,
+ .phy_addr = 7,
+ .slave_port = 8,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+};
+
+int get_num_eth_ports(void)
+{
+ return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t);
+}
+#endif
+
#if defined(CONFIG_BOARD_EARLY_INIT_F)
int board_early_init_f(void)
{
@@ -52,3 +118,14 @@ int board_early_init_f(void)
return 0;
}
#endif
+
+#ifdef CONFIG_SPL_BUILD
+static struct pll_init_data spl_pll_config[] = {
+ CORE_PLL_800,
+};
+
+void spl_init_keystone_plls(void)
+{
+ init_plls(ARRAY_SIZE(spl_pll_config), spl_pll_config);
+}
+#endif
diff --git a/board/ti/ks2_evm/board_k2hk.c b/board/ti/ks2_evm/board_k2hk.c
index 6fb3d21..ed181f4 100644
--- a/board/ti/ks2_evm/board_k2hk.c
+++ b/board/ti/ks2_evm/board_k2hk.c
@@ -10,7 +10,7 @@
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/arch/hardware.h>
-#include <asm/arch/emac_defs.h>
+#include <asm/ti-common/keystone_net.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -100,3 +100,15 @@ int board_early_init_f(void)
return 0;
}
#endif
+
+#ifdef CONFIG_SPL_BUILD
+static struct pll_init_data spl_pll_config[] = {
+ CORE_PLL_799,
+ TETRIS_PLL_500,
+};
+
+void spl_init_keystone_plls(void)
+{
+ init_plls(ARRAY_SIZE(spl_pll_config), spl_pll_config);
+}
+#endif
diff --git a/board/ti/ks2_evm/board_k2l.c b/board/ti/ks2_evm/board_k2l.c
new file mode 100644
index 0000000..559d20c
--- /dev/null
+++ b/board/ti/ks2_evm/board_k2l.c
@@ -0,0 +1,72 @@
+/*
+ * K2L EVM : Board initialization
+ *
+ * (C) Copyright 2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/ddr3.h>
+#include <asm/arch/hardware.h>
+#include <asm/ti-common/ti-aemif.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int external_clk[ext_clk_count] = {
+ [sys_clk] = 122880000,
+ [alt_core_clk] = 100000000,
+ [pa_clk] = 122880000,
+ [tetris_clk] = 122880000,
+ [ddr3_clk] = 100000000,
+ [pcie_clk] = 100000000,
+ [sgmii_clk] = 156250000,
+ [usb_clk] = 100000000,
+};
+
+static struct pll_init_data core_pll_config[] = {
+ CORE_PLL_799,
+ CORE_PLL_1000,
+ CORE_PLL_1198,
+};
+
+static struct pll_init_data tetris_pll_config[] = {
+ TETRIS_PLL_799,
+ TETRIS_PLL_1000,
+ TETRIS_PLL_1198,
+ TETRIS_PLL_1352,
+ TETRIS_PLL_1401,
+};
+
+static struct pll_init_data pa_pll_config =
+ PASS_PLL_983;
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+ int speed;
+
+ speed = get_max_dev_speed();
+ init_pll(&core_pll_config[speed]);
+
+ init_pll(&pa_pll_config);
+
+ speed = get_max_arm_speed();
+ init_pll(&tetris_pll_config[speed]);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+static struct pll_init_data spl_pll_config[] = {
+ CORE_PLL_799,
+ TETRIS_PLL_491,
+};
+
+void spl_init_keystone_plls(void)
+{
+ init_plls(ARRAY_SIZE(spl_pll_config), spl_pll_config);
+}
+#endif
diff --git a/board/ti/ks2_evm/ddr3_cfg.c b/board/ti/ks2_evm/ddr3_cfg.c
index f7da9f2..ab44676 100644
--- a/board/ti/ks2_evm/ddr3_cfg.c
+++ b/board/ti/ks2_evm/ddr3_cfg.c
@@ -133,6 +133,42 @@ struct ddr3_emif_config ddr3_1600_4g = {
};
#endif
+struct ddr3_phy_config ddr3phy_1600_2g = {
+ .pllcr = 0x0001C000ul,
+ .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
+ .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
+ .ptr0 = 0x42C21590ul,
+ .ptr1 = 0xD05612C0ul,
+ .ptr2 = 0, /* not set in gel */
+ .ptr3 = 0x0D861A80ul,
+ .ptr4 = 0x0C827100ul,
+ .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
+ .dcr_val = ((1 << 10)),
+ .dtpr0 = 0x9D5CBB66ul,
+ .dtpr1 = 0x12868300ul,
+ .dtpr2 = 0x5002D200ul,
+ .mr0 = 0x00001C70ul,
+ .mr1 = 0x00000006ul,
+ .mr2 = 0x00000018ul,
+ .dtcr = 0x710035C7ul,
+ .pgcr2 = 0x00F07A12ul,
+ .zq0cr1 = 0x0001005Dul,
+ .zq1cr1 = 0x0001005Bul,
+ .zq2cr1 = 0x0001005Bul,
+ .pir_v1 = 0x00000033ul,
+ .pir_v2 = 0x0000FF81ul,
+};
+
+struct ddr3_emif_config ddr3_1600_2g = {
+ .sdcfg = 0x6200CE62ul,
+ .sdtim1 = 0x166C9855ul,
+ .sdtim2 = 0x00001D4Aul,
+ .sdtim3 = 0x435DFF53ul,
+ .sdtim4 = 0x543F0CFFul,
+ .zqcfg = 0x70073200ul,
+ .sdrfc = 0x00001869ul,
+};
+
int ddr3_get_dimm_params(char *dimm_name)
{
int ret;
diff --git a/board/ti/ks2_evm/ddr3_cfg.h b/board/ti/ks2_evm/ddr3_cfg.h
index 15fcf52..5bd786c 100644
--- a/board/ti/ks2_evm/ddr3_cfg.h
+++ b/board/ti/ks2_evm/ddr3_cfg.h
@@ -19,6 +19,9 @@ extern struct ddr3_emif_config ddr3_1333_2g;
extern struct ddr3_phy_config ddr3phy_1600_4g;
extern struct ddr3_emif_config ddr3_1600_4g;
+extern struct ddr3_phy_config ddr3phy_1600_2g;
+extern struct ddr3_emif_config ddr3_1600_2g;
+
int ddr3_get_dimm_params(char *dimm_name);
#endif /* __DDR3_CFG_H */
diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c
index 6070a99..a1c3d05 100644
--- a/board/ti/ks2_evm/ddr3_k2hk.c
+++ b/board/ti/ks2_evm/ddr3_k2hk.c
@@ -12,6 +12,8 @@
#include <asm/arch/ddr3.h>
#include <asm/arch/hardware.h>
+static int ddr3_size;
+
struct pll_init_data ddr3a_333 = DDR3_PLL_333(A);
struct pll_init_data ddr3a_400 = DDR3_PLL_400(A);
@@ -44,12 +46,14 @@ void ddr3_init(void)
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1600_8g);
printf("DRAM: Capacity 8 GiB (includes reported below)\n");
+ ddr3_size = 8;
} else {
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g);
ddr3_1600_8g.sdcfg |= 0x1000;
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1600_8g);
printf("DRAM: Capacity 4 GiB (includes reported below)\n");
+ ddr3_size = 4;
}
} else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) {
init_pll(&ddr3a_333);
@@ -70,11 +74,15 @@ void ddr3_init(void)
}
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1333_2g);
+ ddr3_size = 2;
+ printf("DRAM: 2 GiB");
} else {
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_2g);
ddr3_1333_2g.sdcfg |= 0x1000;
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1333_2g);
+ ddr3_size = 1;
+ printf("DRAM: 1 GiB");
}
} else {
printf("Unknown SO-DIMM. Cannot configure DDR3\n");
@@ -86,3 +94,11 @@ void ddr3_init(void)
if (cpu_revision() <= 1)
ddr3_err_reset_workaround();
}
+
+/**
+ * ddr3_get_size - return ddr3 size in GiB
+ */
+int ddr3_get_size(void)
+{
+ return ddr3_size;
+}
diff --git a/board/ti/ks2_evm/ddr3_k2l.c b/board/ti/ks2_evm/ddr3_k2l.c
new file mode 100644
index 0000000..15a14f2
--- /dev/null
+++ b/board/ti/ks2_evm/ddr3_k2l.c
@@ -0,0 +1,38 @@
+/*
+ * Keystone2: DDR3 initialization
+ *
+ * (C) Copyright 2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include "ddr3_cfg.h"
+#include <asm/arch/ddr3.h>
+
+static int ddr3_size;
+static struct pll_init_data ddr3_400 = DDR3_PLL_400;
+
+void ddr3_init(void)
+{
+ init_pll(&ddr3_400);
+
+ /* No SO-DIMM, 2GB discreet DDR */
+ printf("DRAM: 2 GiB\n");
+ ddr3_size = 2;
+
+ /* Reset DDR3 PHY after PLL enabled */
+ ddr3_reset_ddrphy();
+
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_2g);
+ ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_2g);
+}
+
+/**
+ * ddr3_get_size - return ddr3 size in GiB
+ */
+int ddr3_get_size(void)
+{
+ return ddr3_size;
+}
diff --git a/board/ti/sdp3430/sdp.h b/board/ti/sdp3430/sdp.h
index 2acb302..0e63189 100644
--- a/board/ti/sdp3430/sdp.h
+++ b/board/ti/sdp3430/sdp.h
@@ -265,7 +265,7 @@
MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0))\
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0))\
MUX_VAL(CP(SYS_CLKOUT2), (OFF_IN_PD | IEN | PTU | EN | M4))/*GPIO_186*/\
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0))\
+ MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0))\
MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0))\
MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0))\
MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0))\
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index b5249e7..247991d 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -15,6 +15,7 @@
#include <asm/arch/iomux-mx51.h>
#include <asm/gpio.h>
#include <asm/arch/sys_proto.h>
+#include <asm/imx-common/spi.h>
#include <i2c.h>
#include <mmc.h>
#include <power/pmic.h>
diff --git a/common/Makefile b/common/Makefile
index c84b3bc..6cc4de8 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -233,6 +233,7 @@ obj-$(CONFIG_SPL_ENV_SUPPORT) += env_flags.o
obj-$(CONFIG_SPL_ENV_SUPPORT) += env_callback.o
obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
obj-$(CONFIG_ENV_IS_IN_MMC) += env_mmc.o
+obj-$(CONFIG_ENV_IS_IN_FAT) += env_fat.o
obj-$(CONFIG_ENV_IS_IN_NAND) += env_nand.o
obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig
new file mode 100644
index 0000000..45399ce
--- /dev/null
+++ b/configs/k2l_evm_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SPL=y
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_KEYSTONE=y
++S:CONFIG_TARGET_K2L_EVM=y
diff --git a/drivers/Makefile b/drivers/Makefile
index d8361d9..33227c8 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -19,3 +19,5 @@ obj-$(CONFIG_QE) += qe/
obj-y += memory/
obj-y += pwm/
obj-y += input/
+# SOC specific infrastructure drivers.
+obj-y += soc/
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index a79c391..4c8fcc2 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -8,3 +8,5 @@
obj-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o
obj-$(CONFIG_APBH_DMA) += apbh_dma.o
obj-$(CONFIG_FSL_DMA) += fsl_dma.o
+obj-$(CONFIG_TI_KSNAV) += keystone_nav.o keystone_nav_cfg.o
+obj-$(CONFIG_TI_EDMA3) += ti-edma3.o
diff --git a/arch/arm/cpu/armv7/keystone/keystone_nav.c b/drivers/dma/keystone_nav.c
index 39d6f99..77707c2 100644
--- a/arch/arm/cpu/armv7/keystone/keystone_nav.c
+++ b/drivers/dma/keystone_nav.c
@@ -8,28 +8,23 @@
*/
#include <common.h>
#include <asm/io.h>
-#include <asm/arch/keystone_nav.h>
-
-static int soc_type =
-#ifdef CONFIG_SOC_K2HK
- k2hk;
-#endif
-
-struct qm_config k2hk_qm_memmap = {
- .stat_cfg = 0x02a40000,
- .queue = (struct qm_reg_queue *)0x02a80000,
- .mngr_vbusm = 0x23a80000,
- .i_lram = 0x00100000,
- .proxy = (struct qm_reg_queue *)0x02ac0000,
- .status_ram = 0x02a06000,
- .mngr_cfg = (struct qm_cfg_reg *)0x02a02000,
- .intd_cfg = 0x02a0c000,
- .desc_mem = (struct descr_mem_setup_reg *)0x02a03000,
- .region_num = 64,
- .pdsp_cmd = 0x02a20000,
- .pdsp_ctl = 0x02a0f000,
- .pdsp_iram = 0x02a10000,
- .qpool_num = 4000,
+#include <asm/ti-common/keystone_nav.h>
+
+struct qm_config qm_memmap = {
+ .stat_cfg = CONFIG_KSNAV_QM_QUEUE_STATUS_BASE,
+ .queue = (void *)CONFIG_KSNAV_QM_MANAGER_QUEUES_BASE,
+ .mngr_vbusm = CONFIG_KSNAV_QM_BASE_ADDRESS,
+ .i_lram = CONFIG_KSNAV_QM_LINK_RAM_BASE,
+ .proxy = (void *)CONFIG_KSNAV_QM_MANAGER_Q_PROXY_BASE,
+ .status_ram = CONFIG_KSNAV_QM_STATUS_RAM_BASE,
+ .mngr_cfg = (void *)CONFIG_KSNAV_QM_CONF_BASE,
+ .intd_cfg = CONFIG_KSNAV_QM_INTD_CONF_BASE,
+ .desc_mem = (void *)CONFIG_KSNAV_QM_DESC_SETUP_BASE,
+ .region_num = CONFIG_KSNAV_QM_REGION_NUM,
+ .pdsp_cmd = CONFIG_KSNAV_QM_PDSP1_CMD_BASE,
+ .pdsp_ctl = CONFIG_KSNAV_QM_PDSP1_CTRL_BASE,
+ .pdsp_iram = CONFIG_KSNAV_QM_PDSP1_IRAM_BASE,
+ .qpool_num = CONFIG_KSNAV_QM_QPOOL_NUM,
};
/*
@@ -52,12 +47,9 @@ inline int num_of_desc_to_reg(int num_descr)
return 15;
}
-static int _qm_init(struct qm_config *cfg)
+int _qm_init(struct qm_config *cfg)
{
- u32 j;
-
- if (cfg == NULL)
- return QM_ERR;
+ u32 j;
qm_cfg = cfg;
@@ -82,12 +74,7 @@ static int _qm_init(struct qm_config *cfg)
int qm_init(void)
{
- switch (soc_type) {
- case k2hk:
- return _qm_init(&k2hk_qm_memmap);
- }
-
- return QM_ERR;
+ return _qm_init(&qm_memmap);
}
void qm_close(void)
@@ -166,39 +153,23 @@ void queue_close(u32 qnum)
;
}
-/*
+/**
* DMA API
*/
-struct pktdma_cfg k2hk_netcp_pktdma = {
- .global = (struct global_ctl_regs *)0x02004000,
- .tx_ch = (struct tx_chan_regs *)0x02004400,
- .tx_ch_num = 9,
- .rx_ch = (struct rx_chan_regs *)0x02004800,
- .rx_ch_num = 26,
- .tx_sched = (u32 *)0x02004c00,
- .rx_flows = (struct rx_flow_regs *)0x02005000,
- .rx_flow_num = 32,
- .rx_free_q = 4001,
- .rx_rcv_q = 4002,
- .tx_snd_q = 648,
-};
-
-struct pktdma_cfg *netcp;
-
-static int netcp_rx_disable(void)
+static int ksnav_rx_disable(struct pktdma_cfg *pktdma)
{
u32 j, v, k;
- for (j = 0; j < netcp->rx_ch_num; j++) {
- v = readl(&netcp->rx_ch[j].cfg_a);
+ for (j = 0; j < pktdma->rx_ch_num; j++) {
+ v = readl(&pktdma->rx_ch[j].cfg_a);
if (!(v & CPDMA_CHAN_A_ENABLE))
continue;
- writel(v | CPDMA_CHAN_A_TDOWN, &netcp->rx_ch[j].cfg_a);
+ writel(v | CPDMA_CHAN_A_TDOWN, &pktdma->rx_ch[j].cfg_a);
for (k = 0; k < TDOWN_TIMEOUT_COUNT; k++) {
udelay(100);
- v = readl(&netcp->rx_ch[j].cfg_a);
+ v = readl(&pktdma->rx_ch[j].cfg_a);
if (!(v & CPDMA_CHAN_A_ENABLE))
continue;
}
@@ -206,33 +177,33 @@ static int netcp_rx_disable(void)
}
/* Clear all of the flow registers */
- for (j = 0; j < netcp->rx_flow_num; j++) {
- writel(0, &netcp->rx_flows[j].control);
- writel(0, &netcp->rx_flows[j].tags);
- writel(0, &netcp->rx_flows[j].tag_sel);
- writel(0, &netcp->rx_flows[j].fdq_sel[0]);
- writel(0, &netcp->rx_flows[j].fdq_sel[1]);
- writel(0, &netcp->rx_flows[j].thresh[0]);
- writel(0, &netcp->rx_flows[j].thresh[1]);
- writel(0, &netcp->rx_flows[j].thresh[2]);
+ for (j = 0; j < pktdma->rx_flow_num; j++) {
+ writel(0, &pktdma->rx_flows[j].control);
+ writel(0, &pktdma->rx_flows[j].tags);
+ writel(0, &pktdma->rx_flows[j].tag_sel);
+ writel(0, &pktdma->rx_flows[j].fdq_sel[0]);
+ writel(0, &pktdma->rx_flows[j].fdq_sel[1]);
+ writel(0, &pktdma->rx_flows[j].thresh[0]);
+ writel(0, &pktdma->rx_flows[j].thresh[1]);
+ writel(0, &pktdma->rx_flows[j].thresh[2]);
}
return QM_OK;
}
-static int netcp_tx_disable(void)
+static int ksnav_tx_disable(struct pktdma_cfg *pktdma)
{
u32 j, v, k;
- for (j = 0; j < netcp->tx_ch_num; j++) {
- v = readl(&netcp->tx_ch[j].cfg_a);
+ for (j = 0; j < pktdma->tx_ch_num; j++) {
+ v = readl(&pktdma->tx_ch[j].cfg_a);
if (!(v & CPDMA_CHAN_A_ENABLE))
continue;
- writel(v | CPDMA_CHAN_A_TDOWN, &netcp->tx_ch[j].cfg_a);
+ writel(v | CPDMA_CHAN_A_TDOWN, &pktdma->tx_ch[j].cfg_a);
for (k = 0; k < TDOWN_TIMEOUT_COUNT; k++) {
udelay(100);
- v = readl(&netcp->tx_ch[j].cfg_a);
+ v = readl(&pktdma->tx_ch[j].cfg_a);
if (!(v & CPDMA_CHAN_A_ENABLE))
continue;
}
@@ -242,19 +213,17 @@ static int netcp_tx_disable(void)
return QM_OK;
}
-static int _netcp_init(struct pktdma_cfg *netcp_cfg,
- struct rx_buff_desc *rx_buffers)
+int ksnav_init(struct pktdma_cfg *pktdma, struct rx_buff_desc *rx_buffers)
{
u32 j, v;
struct qm_host_desc *hd;
u8 *rx_ptr;
- if (netcp_cfg == NULL || rx_buffers == NULL ||
+ if (pktdma == NULL || rx_buffers == NULL ||
rx_buffers->buff_ptr == NULL || qm_cfg == NULL)
return QM_ERR;
- netcp = netcp_cfg;
- netcp->rx_flow = rx_buffers->rx_flow;
+ pktdma->rx_flow = rx_buffers->rx_flow;
/* init rx queue */
rx_ptr = rx_buffers->buff_ptr;
@@ -264,77 +233,64 @@ static int _netcp_init(struct pktdma_cfg *netcp_cfg,
if (hd == NULL)
return QM_ERR;
- qm_buff_push(hd, netcp->rx_free_q,
+ qm_buff_push(hd, pktdma->rx_free_q,
rx_ptr, rx_buffers->buff_len);
rx_ptr += rx_buffers->buff_len;
}
- netcp_rx_disable();
+ ksnav_rx_disable(pktdma);
/* configure rx channels */
- v = CPDMA_REG_VAL_MAKE_RX_FLOW_A(1, 1, 0, 0, 0, 0, 0, netcp->rx_rcv_q);
- writel(v, &netcp->rx_flows[netcp->rx_flow].control);
- writel(0, &netcp->rx_flows[netcp->rx_flow].tags);
- writel(0, &netcp->rx_flows[netcp->rx_flow].tag_sel);
+ v = CPDMA_REG_VAL_MAKE_RX_FLOW_A(1, 1, 0, 0, 0, 0, 0, pktdma->rx_rcv_q);
+ writel(v, &pktdma->rx_flows[pktdma->rx_flow].control);
+ writel(0, &pktdma->rx_flows[pktdma->rx_flow].tags);
+ writel(0, &pktdma->rx_flows[pktdma->rx_flow].tag_sel);
- v = CPDMA_REG_VAL_MAKE_RX_FLOW_D(0, netcp->rx_free_q, 0,
- netcp->rx_free_q);
+ v = CPDMA_REG_VAL_MAKE_RX_FLOW_D(0, pktdma->rx_free_q, 0,
+ pktdma->rx_free_q);
- writel(v, &netcp->rx_flows[netcp->rx_flow].fdq_sel[0]);
- writel(v, &netcp->rx_flows[netcp->rx_flow].fdq_sel[1]);
- writel(0, &netcp->rx_flows[netcp->rx_flow].thresh[0]);
- writel(0, &netcp->rx_flows[netcp->rx_flow].thresh[1]);
- writel(0, &netcp->rx_flows[netcp->rx_flow].thresh[2]);
+ writel(v, &pktdma->rx_flows[pktdma->rx_flow].fdq_sel[0]);
+ writel(v, &pktdma->rx_flows[pktdma->rx_flow].fdq_sel[1]);
+ writel(0, &pktdma->rx_flows[pktdma->rx_flow].thresh[0]);
+ writel(0, &pktdma->rx_flows[pktdma->rx_flow].thresh[1]);
+ writel(0, &pktdma->rx_flows[pktdma->rx_flow].thresh[2]);
- for (j = 0; j < netcp->rx_ch_num; j++)
- writel(CPDMA_CHAN_A_ENABLE, &netcp->rx_ch[j].cfg_a);
+ for (j = 0; j < pktdma->rx_ch_num; j++)
+ writel(CPDMA_CHAN_A_ENABLE, &pktdma->rx_ch[j].cfg_a);
/* configure tx channels */
/* Disable loopback in the tx direction */
- writel(0, &netcp->global->emulation_control);
+ writel(0, &pktdma->global->emulation_control);
-/* TODO: make it dependend on a soc type variable */
-#ifdef CONFIG_SOC_K2HK
/* Set QM base address, only for K2x devices */
- writel(0x23a80000, &netcp->global->qm_base_addr[0]);
-#endif
+ writel(CONFIG_KSNAV_QM_BASE_ADDRESS, &pktdma->global->qm_base_addr[0]);
/* Enable all channels. The current state isn't important */
- for (j = 0; j < netcp->tx_ch_num; j++) {
- writel(0, &netcp->tx_ch[j].cfg_b);
- writel(CPDMA_CHAN_A_ENABLE, &netcp->tx_ch[j].cfg_a);
+ for (j = 0; j < pktdma->tx_ch_num; j++) {
+ writel(0, &pktdma->tx_ch[j].cfg_b);
+ writel(CPDMA_CHAN_A_ENABLE, &pktdma->tx_ch[j].cfg_a);
}
return QM_OK;
}
-int netcp_init(struct rx_buff_desc *rx_buffers)
-{
- switch (soc_type) {
- case k2hk:
- _netcp_init(&k2hk_netcp_pktdma, rx_buffers);
- return QM_OK;
- }
- return QM_ERR;
-}
-
-int netcp_close(void)
+int ksnav_close(struct pktdma_cfg *pktdma)
{
- if (!netcp)
+ if (!pktdma)
return QM_ERR;
- netcp_tx_disable();
- netcp_rx_disable();
+ ksnav_tx_disable(pktdma);
+ ksnav_rx_disable(pktdma);
- queue_close(netcp->rx_free_q);
- queue_close(netcp->rx_rcv_q);
- queue_close(netcp->tx_snd_q);
+ queue_close(pktdma->rx_free_q);
+ queue_close(pktdma->rx_rcv_q);
+ queue_close(pktdma->tx_snd_q);
return QM_OK;
}
-int netcp_send(u32 *pkt, int num_bytes, u32 swinfo2)
+int ksnav_send(struct pktdma_cfg *pktdma, u32 *pkt, int num_bytes, u32 swinfo2)
{
struct qm_host_desc *hd;
@@ -346,16 +302,16 @@ int netcp_send(u32 *pkt, int num_bytes, u32 swinfo2)
hd->swinfo[2] = swinfo2;
hd->packet_info = qm_cfg->qpool_num;
- qm_buff_push(hd, netcp->tx_snd_q, pkt, num_bytes);
+ qm_buff_push(hd, pktdma->tx_snd_q, pkt, num_bytes);
return QM_OK;
}
-void *netcp_recv(u32 **pkt, int *num_bytes)
+void *ksnav_recv(struct pktdma_cfg *pktdma, u32 **pkt, int *num_bytes)
{
struct qm_host_desc *hd;
- hd = qm_pop(netcp->rx_rcv_q);
+ hd = qm_pop(pktdma->rx_rcv_q);
if (!hd)
return NULL;
@@ -365,12 +321,12 @@ void *netcp_recv(u32 **pkt, int *num_bytes)
return hd;
}
-void netcp_release_rxhd(void *hd)
+void ksnav_release_rxhd(struct pktdma_cfg *pktdma, void *hd)
{
struct qm_host_desc *_hd = (struct qm_host_desc *)hd;
_hd->buff_len = _hd->orig_buff_len;
_hd->buff_ptr = _hd->orig_buff_ptr;
- qm_push(_hd, netcp->rx_free_q);
+ qm_push(_hd, pktdma->rx_free_q);
}
diff --git a/drivers/dma/keystone_nav_cfg.c b/drivers/dma/keystone_nav_cfg.c
new file mode 100644
index 0000000..bdd30a0
--- /dev/null
+++ b/drivers/dma/keystone_nav_cfg.c
@@ -0,0 +1,27 @@
+/*
+ * Multicore Navigator driver for TI Keystone 2 devices.
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/ti-common/keystone_nav.h>
+
+#ifdef CONFIG_KSNAV_PKTDMA_NETCP
+/* NETCP Pktdma */
+struct pktdma_cfg netcp_pktdma = {
+ .global = (void *)CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE,
+ .tx_ch = (void *)CONFIG_KSNAV_NETCP_PDMA_TX_BASE,
+ .tx_ch_num = CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM,
+ .rx_ch = (void *)CONFIG_KSNAV_NETCP_PDMA_RX_BASE,
+ .rx_ch_num = CONFIG_KSNAV_NETCP_PDMA_RX_CH_NUM,
+ .tx_sched = (u32 *)CONFIG_KSNAV_NETCP_PDMA_SCHED_BASE,
+ .rx_flows = (void *)CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_BASE,
+ .rx_flow_num = CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_NUM,
+ .rx_free_q = CONFIG_KSNAV_NETCP_PDMA_RX_FREE_QUEUE,
+ .rx_rcv_q = CONFIG_KSNAV_NETCP_PDMA_RX_RCV_QUEUE,
+ .tx_snd_q = CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE,
+};
+#endif
diff --git a/drivers/dma/ti-edma3.c b/drivers/dma/ti-edma3.c
new file mode 100644
index 0000000..8184ded
--- /dev/null
+++ b/drivers/dma/ti-edma3.c
@@ -0,0 +1,384 @@
+/*
+ * Enhanced Direct Memory Access (EDMA3) Controller
+ *
+ * (C) Copyright 2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <asm/ti-common/ti-edma3.h>
+
+#define EDMA3_SL_BASE(slot) (0x4000 + ((slot) << 5))
+#define EDMA3_SL_MAX_NUM 512
+#define EDMA3_SLOPT_FIFO_WIDTH_MASK (0x7 << 8)
+
+#define EDMA3_QCHMAP(ch) 0x0200 + ((ch) << 2)
+#define EDMA3_CHMAP_PARSET_MASK 0x1ff
+#define EDMA3_CHMAP_PARSET_SHIFT 0x5
+#define EDMA3_CHMAP_TRIGWORD_SHIFT 0x2
+
+#define EDMA3_QEMCR 0x314
+#define EDMA3_IPR 0x1068
+#define EDMA3_IPRH 0x106c
+#define EDMA3_ICR 0x1070
+#define EDMA3_ICRH 0x1074
+#define EDMA3_QEECR 0x1088
+#define EDMA3_QEESR 0x108c
+#define EDMA3_QSECR 0x1094
+
+/**
+ * qedma3_start - start qdma on a channel
+ * @base: base address of edma
+ * @cfg: pinter to struct edma3_channel_config where you can set
+ * the slot number to associate with, the chnum, which corresponds
+ * your quick channel number 0-7, complete code - transfer complete code
+ * and trigger slot word - which has to correspond to the word number in
+ * edma3_slot_layout struct for generating event.
+ *
+ */
+void qedma3_start(u32 base, struct edma3_channel_config *cfg)
+{
+ u32 qchmap;
+
+ /* Clear the pending int bit */
+ if (cfg->complete_code < 32)
+ __raw_writel(1 << cfg->complete_code, base + EDMA3_ICR);
+ else
+ __raw_writel(1 << cfg->complete_code, base + EDMA3_ICRH);
+
+ /* Map parameter set and trigger word 7 to quick channel */
+ qchmap = ((EDMA3_CHMAP_PARSET_MASK & cfg->slot)
+ << EDMA3_CHMAP_PARSET_SHIFT) |
+ (cfg->trigger_slot_word << EDMA3_CHMAP_TRIGWORD_SHIFT);
+
+ __raw_writel(qchmap, base + EDMA3_QCHMAP(cfg->chnum));
+
+ /* Clear missed event if set*/
+ __raw_writel(1 << cfg->chnum, base + EDMA3_QSECR);
+ __raw_writel(1 << cfg->chnum, base + EDMA3_QEMCR);
+
+ /* Enable qdma channel event */
+ __raw_writel(1 << cfg->chnum, base + EDMA3_QEESR);
+}
+
+/**
+ * edma3_set_dest - set initial DMA destination address in parameter RAM slot
+ * @base: base address of edma
+ * @slot: parameter RAM slot being configured
+ * @dst: physical address of destination (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @width: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the destination address is modified during the DMA transfer
+ * according to edma3_set_dest_index().
+ */
+void edma3_set_dest(u32 base, int slot, u32 dst, enum edma3_address_mode mode,
+ enum edma3_fifo_width width)
+{
+ u32 opt;
+ struct edma3_slot_layout *rg;
+
+ rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
+
+ opt = __raw_readl(&rg->opt);
+ if (mode == FIFO)
+ opt = (opt & EDMA3_SLOPT_FIFO_WIDTH_MASK) |
+ (EDMA3_SLOPT_DST_ADDR_CONST_MODE |
+ EDMA3_SLOPT_FIFO_WIDTH_SET(width));
+ else
+ opt &= ~EDMA3_SLOPT_DST_ADDR_CONST_MODE;
+
+ __raw_writel(opt, &rg->opt);
+ __raw_writel(dst, &rg->dst);
+}
+
+/**
+ * edma3_set_dest_index - configure DMA destination address indexing
+ * @base: base address of edma
+ * @slot: parameter RAM slot being configured
+ * @bidx: byte offset between destination arrays in a frame
+ * @cidx: byte offset between destination frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma3_set_dest_index(u32 base, unsigned slot, int bidx, int cidx)
+{
+ u32 src_dst_bidx;
+ u32 src_dst_cidx;
+ struct edma3_slot_layout *rg;
+
+ rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
+
+ src_dst_bidx = __raw_readl(&rg->src_dst_bidx);
+ src_dst_cidx = __raw_readl(&rg->src_dst_cidx);
+
+ __raw_writel((src_dst_bidx & 0x0000ffff) | (bidx << 16),
+ &rg->src_dst_bidx);
+ __raw_writel((src_dst_cidx & 0x0000ffff) | (cidx << 16),
+ &rg->src_dst_cidx);
+}
+
+/**
+ * edma3_set_dest_addr - set destination address for slot only
+ */
+void edma3_set_dest_addr(u32 base, int slot, u32 dst)
+{
+ struct edma3_slot_layout *rg;
+
+ rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
+ __raw_writel(dst, &rg->dst);
+}
+
+/**
+ * edma3_set_src - set initial DMA source address in parameter RAM slot
+ * @base: base address of edma
+ * @slot: parameter RAM slot being configured
+ * @src_port: physical address of source (memory, controller FIFO, etc)
+ * @mode: INCR, except in very rare cases
+ * @width: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the source address is modified during the DMA transfer
+ * according to edma3_set_src_index().
+ */
+void edma3_set_src(u32 base, int slot, u32 src, enum edma3_address_mode mode,
+ enum edma3_fifo_width width)
+{
+ u32 opt;
+ struct edma3_slot_layout *rg;
+
+ rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
+
+ opt = __raw_readl(&rg->opt);
+ if (mode == FIFO)
+ opt = (opt & EDMA3_SLOPT_FIFO_WIDTH_MASK) |
+ (EDMA3_SLOPT_DST_ADDR_CONST_MODE |
+ EDMA3_SLOPT_FIFO_WIDTH_SET(width));
+ else
+ opt &= ~EDMA3_SLOPT_DST_ADDR_CONST_MODE;
+
+ __raw_writel(opt, &rg->opt);
+ __raw_writel(src, &rg->src);
+}
+
+/**
+ * edma3_set_src_index - configure DMA source address indexing
+ * @base: base address of edma
+ * @slot: parameter RAM slot being configured
+ * @bidx: byte offset between source arrays in a frame
+ * @cidx: byte offset between source frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma3_set_src_index(u32 base, unsigned slot, int bidx, int cidx)
+{
+ u32 src_dst_bidx;
+ u32 src_dst_cidx;
+ struct edma3_slot_layout *rg;
+
+ rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
+
+ src_dst_bidx = __raw_readl(&rg->src_dst_bidx);
+ src_dst_cidx = __raw_readl(&rg->src_dst_cidx);
+
+ __raw_writel((src_dst_bidx & 0xffff0000) | bidx,
+ &rg->src_dst_bidx);
+ __raw_writel((src_dst_cidx & 0xffff0000) | cidx,
+ &rg->src_dst_cidx);
+}
+
+/**
+ * edma3_set_src_addr - set source address for slot only
+ */
+void edma3_set_src_addr(u32 base, int slot, u32 src)
+{
+ struct edma3_slot_layout *rg;
+
+ rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
+ __raw_writel(src, &rg->src);
+}
+
+/**
+ * edma3_set_transfer_params - configure DMA transfer parameters
+ * @base: base address of edma
+ * @slot: parameter RAM slot being configured
+ * @acnt: how many bytes per array (at least one)
+ * @bcnt: how many arrays per frame (at least one)
+ * @ccnt: how many frames per block (at least one)
+ * @bcnt_rld: used only for A-Synchronized transfers; this specifies
+ * the value to reload into bcnt when it decrements to zero
+ * @sync_mode: ASYNC or ABSYNC
+ *
+ * See the EDMA3 documentation to understand how to configure and link
+ * transfers using the fields in PaRAM slots. If you are not doing it
+ * all at once with edma3_write_slot(), you will use this routine
+ * plus two calls each for source and destination, setting the initial
+ * address and saying how to index that address.
+ *
+ * An example of an A-Synchronized transfer is a serial link using a
+ * single word shift register. In that case, @acnt would be equal to
+ * that word size; the serial controller issues a DMA synchronization
+ * event to transfer each word, and memory access by the DMA transfer
+ * controller will be word-at-a-time.
+ *
+ * An example of an AB-Synchronized transfer is a device using a FIFO.
+ * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
+ * The controller with the FIFO issues DMA synchronization events when
+ * the FIFO threshold is reached, and the DMA transfer controller will
+ * transfer one frame to (or from) the FIFO. It will probably use
+ * efficient burst modes to access memory.
+ */
+void edma3_set_transfer_params(u32 base, int slot, int acnt,
+ int bcnt, int ccnt, u16 bcnt_rld,
+ enum edma3_sync_dimension sync_mode)
+{
+ u32 opt;
+ u32 link_bcntrld;
+ struct edma3_slot_layout *rg;
+
+ rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
+
+ link_bcntrld = __raw_readl(&rg->link_bcntrld);
+
+ __raw_writel((bcnt_rld << 16) | (0x0000ffff & link_bcntrld),
+ &rg->link_bcntrld);
+
+ opt = __raw_readl(&rg->opt);
+ if (sync_mode == ASYNC)
+ __raw_writel(opt & ~EDMA3_SLOPT_AB_SYNC, &rg->opt);
+ else
+ __raw_writel(opt | EDMA3_SLOPT_AB_SYNC, &rg->opt);
+
+ /* Set the acount, bcount, ccount registers */
+ __raw_writel((bcnt << 16) | (acnt & 0xffff), &rg->a_b_cnt);
+ __raw_writel(0xffff & ccnt, &rg->ccnt);
+}
+
+/**
+ * edma3_write_slot - write parameter RAM data for slot
+ * @base: base address of edma
+ * @slot: number of parameter RAM slot being modified
+ * @param: data to be written into parameter RAM slot
+ *
+ * Use this to assign all parameters of a transfer at once. This
+ * allows more efficient setup of transfers than issuing multiple
+ * calls to set up those parameters in small pieces, and provides
+ * complete control over all transfer options.
+ */
+void edma3_write_slot(u32 base, int slot, struct edma3_slot_layout *param)
+{
+ int i;
+ u32 *p = (u32 *)param;
+ u32 *addr = (u32 *)(base + EDMA3_SL_BASE(slot));
+
+ for (i = 0; i < sizeof(struct edma3_slot_layout)/4; i += 4)
+ __raw_writel(*p++, addr++);
+}
+
+/**
+ * edma3_read_slot - read parameter RAM data from slot
+ * @base: base address of edma
+ * @slot: number of parameter RAM slot being copied
+ * @param: where to store copy of parameter RAM data
+ *
+ * Use this to read data from a parameter RAM slot, perhaps to
+ * save them as a template for later reuse.
+ */
+void edma3_read_slot(u32 base, int slot, struct edma3_slot_layout *param)
+{
+ int i;
+ u32 *p = (u32 *)param;
+ u32 *addr = (u32 *)(base + EDMA3_SL_BASE(slot));
+
+ for (i = 0; i < sizeof(struct edma3_slot_layout)/4; i += 4)
+ *p++ = __raw_readl(addr++);
+}
+
+void edma3_slot_configure(u32 base, int slot, struct edma3_slot_config *cfg)
+{
+ struct edma3_slot_layout *rg;
+
+ rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
+
+ __raw_writel(cfg->opt, &rg->opt);
+ __raw_writel(cfg->src, &rg->src);
+ __raw_writel((cfg->bcnt << 16) | (cfg->acnt & 0xffff), &rg->a_b_cnt);
+ __raw_writel(cfg->dst, &rg->dst);
+ __raw_writel((cfg->dst_bidx << 16) |
+ (cfg->src_bidx & 0xffff), &rg->src_dst_bidx);
+ __raw_writel((cfg->bcntrld << 16) |
+ (cfg->link & 0xffff), &rg->link_bcntrld);
+ __raw_writel((cfg->dst_cidx << 16) |
+ (cfg->src_cidx & 0xffff), &rg->src_dst_cidx);
+ __raw_writel(0xffff & cfg->ccnt, &rg->ccnt);
+}
+
+/**
+ * edma3_check_for_transfer - check if transfer coplete by checking
+ * interrupt pending bit. Clear interrupt pending bit if complete.
+ * @base: base address of edma
+ * @cfg: pinter to struct edma3_channel_config which was passed
+ * to qedma3_start when you started qdma channel
+ *
+ * Return 0 if complete, 1 if not.
+ */
+int edma3_check_for_transfer(u32 base, struct edma3_channel_config *cfg)
+{
+ u32 inum;
+ u32 ipr_base;
+ u32 icr_base;
+
+ if (cfg->complete_code < 32) {
+ ipr_base = base + EDMA3_IPR;
+ icr_base = base + EDMA3_ICR;
+ inum = 1 << cfg->complete_code;
+ } else {
+ ipr_base = base + EDMA3_IPRH;
+ icr_base = base + EDMA3_ICRH;
+ inum = 1 << (cfg->complete_code - 32);
+ }
+
+ /* check complete interrupt */
+ if (!(__raw_readl(ipr_base) & inum))
+ return 1;
+
+ /* clean up the pending int bit */
+ __raw_writel(inum, icr_base);
+
+ return 0;
+}
+
+/**
+ * qedma3_stop - stops dma on the channel passed
+ * @base: base address of edma
+ * @cfg: pinter to struct edma3_channel_config which was passed
+ * to qedma3_start when you started qdma channel
+ */
+void qedma3_stop(u32 base, struct edma3_channel_config *cfg)
+{
+ /* Disable qdma channel event */
+ __raw_writel(1 << cfg->chnum, base + EDMA3_QEECR);
+
+ /* clean up the interrupt indication */
+ if (cfg->complete_code < 32)
+ __raw_writel(1 << cfg->complete_code, base + EDMA3_ICR);
+ else
+ __raw_writel(1 << cfg->complete_code, base + EDMA3_ICRH);
+
+ /* Clear missed event if set*/
+ __raw_writel(1 << cfg->chnum, base + EDMA3_QSECR);
+ __raw_writel(1 << cfg->chnum, base + EDMA3_QEMCR);
+
+ /* Clear the channel map */
+ __raw_writel(0, base + EDMA3_QCHMAP(cfg->chnum));
+}
diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c
index d22b722..c8681d0 100644
--- a/drivers/net/keystone_net.c
+++ b/drivers/net/keystone_net.c
@@ -10,15 +10,16 @@
#include <command.h>
#include <net.h>
+#include <phy.h>
+#include <errno.h>
#include <miiphy.h>
#include <malloc.h>
-#include <asm/arch/emac_defs.h>
-#include <asm/arch/psc_defs.h>
-#include <asm/arch/keystone_nav.h>
-
-unsigned int emac_dbg;
+#include <asm/ti-common/keystone_nav.h>
+#include <asm/ti-common/keystone_net.h>
+#include <asm/ti-common/keystone_serdes.h>
unsigned int emac_open;
+static struct mii_dev *mdio_bus;
static unsigned int sys_has_mdio = 1;
#ifdef KEYSTONE2_EMAC_GIG_ENABLE
@@ -30,6 +31,7 @@ static unsigned int sys_has_mdio = 1;
#define RX_BUFF_NUMS 24
#define RX_BUFF_LEN 1520
#define MAX_SIZE_STREAM_BUFFER RX_BUFF_LEN
+#define SGMII_ANEG_TIMEOUT 4000
static u8 rx_buffs[RX_BUFF_NUMS * RX_BUFF_LEN] __aligned(16);
@@ -40,15 +42,7 @@ struct rx_buff_desc net_rx_buffs = {
.rx_flow = 22,
};
-static void keystone2_eth_mdio_enable(void);
-
-static int gen_get_link_speed(int phy_addr);
-
-/* EMAC Addresses */
-static volatile struct emac_regs *adap_emac =
- (struct emac_regs *)EMAC_EMACSL_BASE_ADDR;
-static volatile struct mdio_regs *adap_mdio =
- (struct mdio_regs *)EMAC_MDIO_BASE_ADDR;
+static void keystone2_net_serdes_setup(void);
int keystone2_eth_read_mac_addr(struct eth_device *dev)
{
@@ -74,64 +68,67 @@ int keystone2_eth_read_mac_addr(struct eth_device *dev)
return 0;
}
-static void keystone2_eth_mdio_enable(void)
+/* MDIO */
+
+static int keystone2_mdio_reset(struct mii_dev *bus)
{
- u_int32_t clkdiv;
+ u_int32_t clkdiv;
+ struct mdio_regs *adap_mdio = bus->priv;
clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
- writel((clkdiv & 0xffff) |
- MDIO_CONTROL_ENABLE |
- MDIO_CONTROL_FAULT |
- MDIO_CONTROL_FAULT_ENABLE,
+ writel((clkdiv & 0xffff) | MDIO_CONTROL_ENABLE |
+ MDIO_CONTROL_FAULT | MDIO_CONTROL_FAULT_ENABLE,
&adap_mdio->control);
while (readl(&adap_mdio->control) & MDIO_CONTROL_IDLE)
;
+
+ return 0;
}
-/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */
-int keystone2_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
+/**
+ * keystone2_mdio_read - read a PHY register via MDIO interface.
+ * Blocks until operation is complete.
+ */
+static int keystone2_mdio_read(struct mii_dev *bus,
+ int addr, int devad, int reg)
{
- int tmp;
+ int tmp;
+ struct mdio_regs *adap_mdio = bus->priv;
while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
;
- writel(MDIO_USERACCESS0_GO |
- MDIO_USERACCESS0_WRITE_READ |
- ((reg_num & 0x1f) << 21) |
- ((phy_addr & 0x1f) << 16),
+ writel(MDIO_USERACCESS0_GO | MDIO_USERACCESS0_WRITE_READ |
+ ((reg & 0x1f) << 21) | ((addr & 0x1f) << 16),
&adap_mdio->useraccess0);
/* Wait for command to complete */
while ((tmp = readl(&adap_mdio->useraccess0)) & MDIO_USERACCESS0_GO)
;
- if (tmp & MDIO_USERACCESS0_ACK) {
- *data = tmp & 0xffff;
- return 0;
- }
+ if (tmp & MDIO_USERACCESS0_ACK)
+ return tmp & 0xffff;
- *data = -1;
return -1;
}
-/*
- * Write to a PHY register via MDIO inteface.
+/**
+ * keystone2_mdio_write - write to a PHY register via MDIO interface.
* Blocks until operation is complete.
*/
-int keystone2_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
+static int keystone2_mdio_write(struct mii_dev *bus,
+ int addr, int devad, int reg, u16 val)
{
+ struct mdio_regs *adap_mdio = bus->priv;
+
while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
;
- writel(MDIO_USERACCESS0_GO |
- MDIO_USERACCESS0_WRITE_WRITE |
- ((reg_num & 0x1f) << 21) |
- ((phy_addr & 0x1f) << 16) |
- (data & 0xffff),
- &adap_mdio->useraccess0);
+ writel(MDIO_USERACCESS0_GO | MDIO_USERACCESS0_WRITE_WRITE |
+ ((reg & 0x1f) << 21) | ((addr & 0x1f) << 16) |
+ (val & 0xffff), &adap_mdio->useraccess0);
/* Wait for command to complete */
while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO)
@@ -140,19 +137,6 @@ int keystone2_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
return 0;
}
-/* PHY functions for a generic PHY */
-static int gen_get_link_speed(int phy_addr)
-{
- u_int16_t tmp;
-
- if ((!keystone2_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp)) &&
- (tmp & 0x04)) {
- return 0;
- }
-
- return -1;
-}
-
static void __attribute__((unused))
keystone2_eth_gigabit_enable(struct eth_device *dev)
{
@@ -160,8 +144,10 @@ static void __attribute__((unused))
struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
if (sys_has_mdio) {
- if (keystone2_eth_phy_read(eth_priv->phy_addr, 0, &data) ||
- !(data & (1 << 6))) /* speed selection MSB */
+ data = keystone2_mdio_read(mdio_bus, eth_priv->phy_addr,
+ MDIO_DEVAD_NONE, 0);
+ /* speed selection MSB */
+ if (!(data & (1 << 6)))
return;
}
@@ -169,10 +155,10 @@ static void __attribute__((unused))
* Check if link detected is giga-bit
* If Gigabit mode detected, enable gigbit in MAC
*/
- writel(readl(&(adap_emac[eth_priv->slave_port - 1].maccontrol)) |
+ writel(readl(DEVICE_EMACSL_BASE(eth_priv->slave_port - 1) +
+ CPGMACSL_REG_CTL) |
EMAC_MACCONTROL_GIGFORCE | EMAC_MACCONTROL_GIGABIT_ENABLE,
- &(adap_emac[eth_priv->slave_port - 1].maccontrol))
- ;
+ DEVICE_EMACSL_BASE(eth_priv->slave_port - 1) + CPGMACSL_REG_CTL);
}
int keystone_sgmii_link_status(int port)
@@ -181,38 +167,11 @@ int keystone_sgmii_link_status(int port)
status = __raw_readl(SGMII_STATUS_REG(port));
- return status & SGMII_REG_STATUS_LINK;
+ return (status & SGMII_REG_STATUS_LOCK) &&
+ (status & SGMII_REG_STATUS_LINK);
}
-
-int keystone_get_link_status(struct eth_device *dev)
-{
- struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
- int sgmii_link;
- int link_state = 0;
-#if CONFIG_GET_LINK_STATUS_ATTEMPTS > 1
- int j;
-
- for (j = 0; (j < CONFIG_GET_LINK_STATUS_ATTEMPTS) && (link_state == 0);
- j++) {
-#endif
- sgmii_link =
- keystone_sgmii_link_status(eth_priv->slave_port - 1);
-
- if (sgmii_link) {
- link_state = 1;
-
- if (eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY)
- if (gen_get_link_speed(eth_priv->phy_addr))
- link_state = 0;
- }
-#if CONFIG_GET_LINK_STATUS_ATTEMPTS > 1
- }
-#endif
- return link_state;
-}
-
-int keystone_sgmii_config(int port, int interface)
+int keystone_sgmii_config(struct phy_device *phy_dev, int port, int interface)
{
unsigned int i, status, mask;
unsigned int mr_adv_ability, control;
@@ -273,11 +232,35 @@ int keystone_sgmii_config(int port, int interface)
if (control & SGMII_REG_CONTROL_AUTONEG)
mask |= SGMII_REG_STATUS_AUTONEG;
- for (i = 0; i < 1000; i++) {
+ status = __raw_readl(SGMII_STATUS_REG(port));
+ if ((status & mask) == mask)
+ return 0;
+
+ printf("\n%s Waiting for SGMII auto negotiation to complete",
+ phy_dev->dev->name);
+ while ((status & mask) != mask) {
+ /*
+ * Timeout reached ?
+ */
+ if (i > SGMII_ANEG_TIMEOUT) {
+ puts(" TIMEOUT !\n");
+ phy_dev->link = 0;
+ return 0;
+ }
+
+ if (ctrlc()) {
+ puts("user interrupt!\n");
+ phy_dev->link = 0;
+ return -EINTR;
+ }
+
+ if ((i++ % 500) == 0)
+ printf(".");
+
+ udelay(1000); /* 1 ms */
status = __raw_readl(SGMII_STATUS_REG(port));
- if ((status & mask) == mask)
- break;
}
+ puts(" done\n");
return 0;
}
@@ -332,6 +315,11 @@ int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg)
writel(cfg->max_rx_len, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN);
writel(cfg->ctl, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL);
+#ifdef CONFIG_K2E_EVM
+ /* Map RX packet flow priority to 0 */
+ writel(0, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RX_PRI_MAP);
+#endif
+
return ret;
}
@@ -393,15 +381,15 @@ int32_t cpmac_drv_send(u32 *buffer, int num_bytes, int slave_port_num)
if (num_bytes < EMAC_MIN_ETHERNET_PKT_SIZE)
num_bytes = EMAC_MIN_ETHERNET_PKT_SIZE;
- return netcp_send(buffer, num_bytes, (slave_port_num) << 16);
+ return ksnav_send(&netcp_pktdma, buffer,
+ num_bytes, (slave_port_num) << 16);
}
/* Eth device open */
static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
{
- u_int32_t clkdiv;
- int link;
struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
+ struct phy_device *phy_dev = eth_priv->phy_dev;
debug("+ emac_open\n");
@@ -410,15 +398,9 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
sys_has_mdio =
(eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY) ? 1 : 0;
- psc_enable_module(KS2_LPSC_PA);
- psc_enable_module(KS2_LPSC_CPGMAC);
-
- sgmii_serdes_setup_156p25mhz();
-
- if (sys_has_mdio)
- keystone2_eth_mdio_enable();
+ keystone2_net_serdes_setup();
- keystone_sgmii_config(eth_priv->slave_port - 1,
+ keystone_sgmii_config(phy_dev, eth_priv->slave_port - 1,
eth_priv->sgmii_link_type);
udelay(10000);
@@ -431,7 +413,7 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
printf("ERROR: qm_init()\n");
return -1;
}
- if (netcp_init(&net_rx_buffs)) {
+ if (ksnav_init(&netcp_pktdma, &net_rx_buffs)) {
qm_close();
printf("ERROR: netcp_init()\n");
return -1;
@@ -445,18 +427,11 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
hw_config_streaming_switch();
if (sys_has_mdio) {
- /* Init MDIO & get link state */
- clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
- writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE |
- MDIO_CONTROL_FAULT, &adap_mdio->control)
- ;
-
- /* We need to wait for MDIO to start */
- udelay(1000);
-
- link = keystone_get_link_status(dev);
- if (link == 0) {
- netcp_close();
+ keystone2_mdio_reset(mdio_bus);
+
+ phy_startup(phy_dev);
+ if (phy_dev->link == 0) {
+ ksnav_close(&netcp_pktdma);
qm_close();
return -1;
}
@@ -476,6 +451,9 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis)
/* Eth device close */
void keystone2_eth_close(struct eth_device *dev)
{
+ struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
+ struct phy_device *phy_dev = eth_priv->phy_dev;
+
debug("+ emac_close\n");
if (!emac_open)
@@ -483,16 +461,15 @@ void keystone2_eth_close(struct eth_device *dev)
ethss_stop();
- netcp_close();
+ ksnav_close(&netcp_pktdma);
qm_close();
+ phy_shutdown(phy_dev);
emac_open = 0;
debug("- emac_close\n");
}
-static int tx_send_loop;
-
/*
* This function sends a single packet on the network and returns
* positive number (number of bytes transmitted) or negative for error
@@ -502,22 +479,15 @@ static int keystone2_eth_send_packet(struct eth_device *dev,
{
int ret_status = -1;
struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv;
+ struct phy_device *phy_dev = eth_priv->phy_dev;
- tx_send_loop = 0;
-
- if (keystone_get_link_status(dev) == 0)
+ genphy_update_link(phy_dev);
+ if (phy_dev->link == 0)
return -1;
- emac_gigabit_enable(dev);
-
if (cpmac_drv_send((u32 *)packet, length, eth_priv->slave_port) != 0)
return ret_status;
- if (keystone_get_link_status(dev) == 0)
- return -1;
-
- emac_gigabit_enable(dev);
-
return length;
}
@@ -530,13 +500,13 @@ static int keystone2_eth_rcv_packet(struct eth_device *dev)
int pkt_size;
u32 *pkt;
- hd = netcp_recv(&pkt, &pkt_size);
+ hd = ksnav_recv(&netcp_pktdma, &pkt, &pkt_size);
if (hd == NULL)
return 0;
NetReceive((uchar *)pkt, pkt_size);
- netcp_release_rxhd(hd);
+ ksnav_release_rxhd(&netcp_pktdma, hd);
return pkt_size;
}
@@ -546,7 +516,9 @@ static int keystone2_eth_rcv_packet(struct eth_device *dev)
*/
int keystone2_emac_initialize(struct eth_priv_t *eth_priv)
{
+ int res;
struct eth_device *dev;
+ struct phy_device *phy_dev;
dev = malloc(sizeof(struct eth_device));
if (dev == NULL)
@@ -567,145 +539,55 @@ int keystone2_emac_initialize(struct eth_priv_t *eth_priv)
eth_register(dev);
- return 0;
-}
-
-void sgmii_serdes_setup_156p25mhz(void)
-{
- unsigned int cnt;
-
- /*
- * configure Serializer/Deserializer (SerDes) hardware. SerDes IP
- * hardware vendor published only register addresses and their values
- * to be used for configuring SerDes. So had to use hardcoded values
- * below.
- */
- clrsetbits_le32(0x0232a000, 0xffff0000, 0x00800000);
- clrsetbits_le32(0x0232a014, 0x0000ffff, 0x00008282);
- clrsetbits_le32(0x0232a060, 0x00ffffff, 0x00142438);
- clrsetbits_le32(0x0232a064, 0x00ffff00, 0x00c3c700);
- clrsetbits_le32(0x0232a078, 0x0000ff00, 0x0000c000);
-
- clrsetbits_le32(0x0232a204, 0xff0000ff, 0x38000080);
- clrsetbits_le32(0x0232a208, 0x000000ff, 0x00000000);
- clrsetbits_le32(0x0232a20c, 0xff000000, 0x02000000);
- clrsetbits_le32(0x0232a210, 0xff000000, 0x1b000000);
- clrsetbits_le32(0x0232a214, 0x0000ffff, 0x00006fb8);
- clrsetbits_le32(0x0232a218, 0xffff00ff, 0x758000e4);
- clrsetbits_le32(0x0232a2ac, 0x0000ff00, 0x00004400);
- clrsetbits_le32(0x0232a22c, 0x00ffff00, 0x00200800);
- clrsetbits_le32(0x0232a280, 0x00ff00ff, 0x00820082);
- clrsetbits_le32(0x0232a284, 0xffffffff, 0x1d0f0385);
-
- clrsetbits_le32(0x0232a404, 0xff0000ff, 0x38000080);
- clrsetbits_le32(0x0232a408, 0x000000ff, 0x00000000);
- clrsetbits_le32(0x0232a40c, 0xff000000, 0x02000000);
- clrsetbits_le32(0x0232a410, 0xff000000, 0x1b000000);
- clrsetbits_le32(0x0232a414, 0x0000ffff, 0x00006fb8);
- clrsetbits_le32(0x0232a418, 0xffff00ff, 0x758000e4);
- clrsetbits_le32(0x0232a4ac, 0x0000ff00, 0x00004400);
- clrsetbits_le32(0x0232a42c, 0x00ffff00, 0x00200800);
- clrsetbits_le32(0x0232a480, 0x00ff00ff, 0x00820082);
- clrsetbits_le32(0x0232a484, 0xffffffff, 0x1d0f0385);
-
- clrsetbits_le32(0x0232a604, 0xff0000ff, 0x38000080);
- clrsetbits_le32(0x0232a608, 0x000000ff, 0x00000000);
- clrsetbits_le32(0x0232a60c, 0xff000000, 0x02000000);
- clrsetbits_le32(0x0232a610, 0xff000000, 0x1b000000);
- clrsetbits_le32(0x0232a614, 0x0000ffff, 0x00006fb8);
- clrsetbits_le32(0x0232a618, 0xffff00ff, 0x758000e4);
- clrsetbits_le32(0x0232a6ac, 0x0000ff00, 0x00004400);
- clrsetbits_le32(0x0232a62c, 0x00ffff00, 0x00200800);
- clrsetbits_le32(0x0232a680, 0x00ff00ff, 0x00820082);
- clrsetbits_le32(0x0232a684, 0xffffffff, 0x1d0f0385);
-
- clrsetbits_le32(0x0232a804, 0xff0000ff, 0x38000080);
- clrsetbits_le32(0x0232a808, 0x000000ff, 0x00000000);
- clrsetbits_le32(0x0232a80c, 0xff000000, 0x02000000);
- clrsetbits_le32(0x0232a810, 0xff000000, 0x1b000000);
- clrsetbits_le32(0x0232a814, 0x0000ffff, 0x00006fb8);
- clrsetbits_le32(0x0232a818, 0xffff00ff, 0x758000e4);
- clrsetbits_le32(0x0232a8ac, 0x0000ff00, 0x00004400);
- clrsetbits_le32(0x0232a82c, 0x00ffff00, 0x00200800);
- clrsetbits_le32(0x0232a880, 0x00ff00ff, 0x00820082);
- clrsetbits_le32(0x0232a884, 0xffffffff, 0x1d0f0385);
-
- clrsetbits_le32(0x0232aa00, 0x0000ff00, 0x00000800);
- clrsetbits_le32(0x0232aa08, 0xffff0000, 0x38a20000);
- clrsetbits_le32(0x0232aa30, 0x00ffff00, 0x008a8a00);
- clrsetbits_le32(0x0232aa84, 0x0000ff00, 0x00000600);
- clrsetbits_le32(0x0232aa94, 0xff000000, 0x10000000);
- clrsetbits_le32(0x0232aaa0, 0xff000000, 0x81000000);
- clrsetbits_le32(0x0232aabc, 0xff000000, 0xff000000);
- clrsetbits_le32(0x0232aac0, 0x000000ff, 0x0000008b);
- clrsetbits_le32(0x0232ab08, 0xffff0000, 0x583f0000);
- clrsetbits_le32(0x0232ab0c, 0x000000ff, 0x0000004e);
- clrsetbits_le32(0x0232a000, 0x000000ff, 0x00000003);
- clrsetbits_le32(0x0232aa00, 0x000000ff, 0x0000005f);
-
- clrsetbits_le32(0x0232aa48, 0x00ffff00, 0x00fd8c00);
- clrsetbits_le32(0x0232aa54, 0x00ffffff, 0x002fec72);
- clrsetbits_le32(0x0232aa58, 0xffffff00, 0x00f92100);
- clrsetbits_le32(0x0232aa5c, 0xffffffff, 0x00040060);
- clrsetbits_le32(0x0232aa60, 0xffffffff, 0x00008000);
- clrsetbits_le32(0x0232aa64, 0xffffffff, 0x0c581220);
- clrsetbits_le32(0x0232aa68, 0xffffffff, 0xe13b0602);
- clrsetbits_le32(0x0232aa6c, 0xffffffff, 0xb8074cc1);
- clrsetbits_le32(0x0232aa70, 0xffffffff, 0x3f02e989);
- clrsetbits_le32(0x0232aa74, 0x000000ff, 0x00000001);
- clrsetbits_le32(0x0232ab20, 0x00ff0000, 0x00370000);
- clrsetbits_le32(0x0232ab1c, 0xff000000, 0x37000000);
- clrsetbits_le32(0x0232ab20, 0x000000ff, 0x0000005d);
-
- /*Bring SerDes out of Reset if SerDes is Shutdown & is in Reset Mode*/
- clrbits_le32(0x0232a010, 1 << 28);
-
- /* Enable TX and RX via the LANExCTL_STS 0x0000 + x*4 */
- clrbits_le32(0x0232a228, 1 << 29);
- writel(0xF800F8C0, 0x0232bfe0);
- clrbits_le32(0x0232a428, 1 << 29);
- writel(0xF800F8C0, 0x0232bfe4);
- clrbits_le32(0x0232a628, 1 << 29);
- writel(0xF800F8C0, 0x0232bfe8);
- clrbits_le32(0x0232a828, 1 << 29);
- writel(0xF800F8C0, 0x0232bfec);
-
- /*Enable pll via the pll_ctrl 0x0014*/
- writel(0xe0000000, 0x0232bff4)
- ;
-
- /*Waiting for SGMII Serdes PLL lock.*/
- for (cnt = 10000; cnt > 0 && ((readl(0x02090114) & 0x10) == 0); cnt--)
- ;
-
- for (cnt = 10000; cnt > 0 && ((readl(0x02090214) & 0x10) == 0); cnt--)
- ;
-
- for (cnt = 10000; cnt > 0 && ((readl(0x02090414) & 0x10) == 0); cnt--)
- ;
+ /* Register MDIO bus if it's not registered yet */
+ if (!mdio_bus) {
+ mdio_bus = mdio_alloc();
+ mdio_bus->read = keystone2_mdio_read;
+ mdio_bus->write = keystone2_mdio_write;
+ mdio_bus->reset = keystone2_mdio_reset;
+ mdio_bus->priv = (void *)EMAC_MDIO_BASE_ADDR;
+ sprintf(mdio_bus->name, "ethernet-mdio");
+
+ res = mdio_register(mdio_bus);
+ if (res)
+ return res;
+ }
- for (cnt = 10000; cnt > 0 && ((readl(0x02090514) & 0x10) == 0); cnt--)
- ;
+ /* Create phy device and bind it with driver */
+#ifdef CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
+ phy_dev = phy_connect(mdio_bus, eth_priv->phy_addr,
+ dev, PHY_INTERFACE_MODE_SGMII);
+ phy_config(phy_dev);
+#else
+ phy_dev = phy_find_by_mask(mdio_bus, 1 << eth_priv->phy_addr,
+ PHY_INTERFACE_MODE_SGMII);
+ phy_dev->dev = dev;
+#endif
+ eth_priv->phy_dev = phy_dev;
- udelay(45000);
+ return 0;
}
-void sgmii_serdes_shutdown(void)
+struct ks2_serdes ks2_serdes_sgmii_156p25mhz = {
+ .clk = SERDES_CLOCK_156P25M,
+ .rate = SERDES_RATE_5G,
+ .rate_mode = SERDES_QUARTER_RATE,
+ .intf = SERDES_PHY_SGMII,
+ .loopback = 0,
+};
+
+static void keystone2_net_serdes_setup(void)
{
- /*
- * shutdown SerDes hardware. SerDes hardware vendor published only
- * register addresses and their values. So had to use hardcoded
- * values below.
- */
- clrbits_le32(0x0232bfe0, 3 << 29 | 3 << 13);
- setbits_le32(0x02320228, 1 << 29);
- clrbits_le32(0x0232bfe4, 3 << 29 | 3 << 13);
- setbits_le32(0x02320428, 1 << 29);
- clrbits_le32(0x0232bfe8, 3 << 29 | 3 << 13);
- setbits_le32(0x02320628, 1 << 29);
- clrbits_le32(0x0232bfec, 3 << 29 | 3 << 13);
- setbits_le32(0x02320828, 1 << 29);
-
- clrbits_le32(0x02320034, 3 << 29);
- setbits_le32(0x02320010, 1 << 28);
+ ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII_BASE,
+ &ks2_serdes_sgmii_156p25mhz,
+ CONFIG_KSNET_SERDES_LANES_PER_SGMII);
+
+#ifdef CONFIG_SOC_K2E
+ ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII2_BASE,
+ &ks2_serdes_sgmii_156p25mhz,
+ CONFIG_KSNET_SERDES_LANES_PER_SGMII);
+#endif
+
+ /* wait till setup */
+ udelay(5000);
}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index f1ace3c..467c972 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -648,7 +648,7 @@ static struct phy_device *get_phy_device_by_mask(struct mii_dev *bus,
if (phydev)
return phydev;
}
- printf("Phy not found\n");
+ printf("Phy %d not found\n", ffs(phy_mask) - 1);
return phy_device_create(bus, ffs(phy_mask) - 1, 0xffffffff, interface);
}
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
new file mode 100644
index 0000000..3d4baa5
--- /dev/null
+++ b/drivers/soc/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the U-boot SOC specific device drivers.
+#
+
+obj-$(CONFIG_ARCH_KEYSTONE) += keystone/
diff --git a/drivers/soc/keystone/Makefile b/drivers/soc/keystone/Makefile
new file mode 100644
index 0000000..c000eca
--- /dev/null
+++ b/drivers/soc/keystone/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_TI_KEYSTONE_SERDES) += keystone_serdes.o
diff --git a/drivers/soc/keystone/keystone_serdes.c b/drivers/soc/keystone/keystone_serdes.c
new file mode 100644
index 0000000..dd5eac9
--- /dev/null
+++ b/drivers/soc/keystone/keystone_serdes.c
@@ -0,0 +1,210 @@
+/*
+ * TI serdes driver for keystone2.
+ *
+ * (C) Copyright 2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <errno.h>
+#include <common.h>
+#include <asm/ti-common/keystone_serdes.h>
+
+#define SERDES_CMU_REGS(x) (0x0000 + (0x0c00 * (x)))
+#define SERDES_LANE_REGS(x) (0x0200 + (0x200 * (x)))
+#define SERDES_COMLANE_REGS 0x0a00
+#define SERDES_WIZ_REGS 0x1fc0
+
+#define SERDES_CMU_REG_000(x) (SERDES_CMU_REGS(x) + 0x000)
+#define SERDES_CMU_REG_010(x) (SERDES_CMU_REGS(x) + 0x010)
+#define SERDES_COMLANE_REG_000 (SERDES_COMLANE_REGS + 0x000)
+#define SERDES_LANE_REG_000(x) (SERDES_LANE_REGS(x) + 0x000)
+#define SERDES_LANE_REG_028(x) (SERDES_LANE_REGS(x) + 0x028)
+#define SERDES_LANE_CTL_STATUS_REG(x) (SERDES_WIZ_REGS + 0x0020 + (4 * (x)))
+#define SERDES_PLL_CTL_REG (SERDES_WIZ_REGS + 0x0034)
+
+#define SERDES_RESET BIT(28)
+#define SERDES_LANE_RESET BIT(29)
+#define SERDES_LANE_LOOPBACK BIT(30)
+#define SERDES_LANE_EN_VAL(x, y, z) (x[y] | (z << 26) | (z << 10))
+
+#define SERDES_CMU_CFG_NUM 5
+#define SERDES_COMLANE_CFG_NUM 10
+#define SERDES_LANE_CFG_NUM 10
+
+struct serdes_cfg {
+ u32 ofs;
+ u32 val;
+ u32 mask;
+};
+
+struct cfg_entry {
+ enum ks2_serdes_clock clk;
+ enum ks2_serdes_rate rate;
+ struct serdes_cfg cmu[SERDES_CMU_CFG_NUM];
+ struct serdes_cfg comlane[SERDES_COMLANE_CFG_NUM];
+ struct serdes_cfg lane[SERDES_LANE_CFG_NUM];
+};
+
+/* SERDES PHY lane enable configuration value, indexed by PHY interface */
+static u32 serdes_cfg_lane_enable[] = {
+ 0xf000f0c0, /* SGMII */
+ 0xf0e9f038, /* PCSR */
+};
+
+/* SERDES PHY PLL enable configuration value, indexed by PHY interface */
+static u32 serdes_cfg_pll_enable[] = {
+ 0xe0000000, /* SGMII */
+ 0xee000000, /* PCSR */
+};
+
+/**
+ * Array to hold all possible serdes configurations.
+ * Combination for 5 clock settings and 6 baud rates.
+ */
+static struct cfg_entry cfgs[] = {
+ {
+ .clk = SERDES_CLOCK_156P25M,
+ .rate = SERDES_RATE_5G,
+ .cmu = {
+ {0x0000, 0x00800000, 0xffff0000},
+ {0x0014, 0x00008282, 0x0000ffff},
+ {0x0060, 0x00142438, 0x00ffffff},
+ {0x0064, 0x00c3c700, 0x00ffff00},
+ {0x0078, 0x0000c000, 0x0000ff00}
+ },
+ .comlane = {
+ {0x0a00, 0x00000800, 0x0000ff00},
+ {0x0a08, 0x38a20000, 0xffff0000},
+ {0x0a30, 0x008a8a00, 0x00ffff00},
+ {0x0a84, 0x00000600, 0x0000ff00},
+ {0x0a94, 0x10000000, 0xff000000},
+ {0x0aa0, 0x81000000, 0xff000000},
+ {0x0abc, 0xff000000, 0xff000000},
+ {0x0ac0, 0x0000008b, 0x000000ff},
+ {0x0b08, 0x583f0000, 0xffff0000},
+ {0x0b0c, 0x0000004e, 0x000000ff}
+ },
+ .lane = {
+ {0x0004, 0x38000080, 0xff0000ff},
+ {0x0008, 0x00000000, 0x000000ff},
+ {0x000c, 0x02000000, 0xff000000},
+ {0x0010, 0x1b000000, 0xff000000},
+ {0x0014, 0x00006fb8, 0x0000ffff},
+ {0x0018, 0x758000e4, 0xffff00ff},
+ {0x00ac, 0x00004400, 0x0000ff00},
+ {0x002c, 0x00100800, 0x00ffff00},
+ {0x0080, 0x00820082, 0x00ff00ff},
+ {0x0084, 0x1d0f0385, 0xffffffff}
+ },
+ },
+};
+
+static inline void ks2_serdes_rmw(u32 addr, u32 value, u32 mask)
+{
+ writel(((readl(addr) & (~mask)) | (value & mask)), addr);
+}
+
+static void ks2_serdes_cfg_setup(u32 base, struct serdes_cfg *cfg, u32 size)
+{
+ u32 i;
+
+ for (i = 0; i < size; i++)
+ ks2_serdes_rmw(base + cfg[i].ofs, cfg[i].val, cfg[i].mask);
+}
+
+static void ks2_serdes_lane_config(u32 base, struct serdes_cfg *cfg_lane,
+ u32 size, u32 lane)
+{
+ u32 i;
+
+ for (i = 0; i < size; i++)
+ ks2_serdes_rmw(base + cfg_lane[i].ofs + SERDES_LANE_REGS(lane),
+ cfg_lane[i].val, cfg_lane[i].mask);
+}
+
+static int ks2_serdes_init_cfg(u32 base, struct cfg_entry *cfg, u32 num_lanes)
+{
+ u32 i;
+
+ ks2_serdes_cfg_setup(base, cfg->cmu, SERDES_CMU_CFG_NUM);
+ ks2_serdes_cfg_setup(base, cfg->comlane, SERDES_COMLANE_CFG_NUM);
+
+ for (i = 0; i < num_lanes; i++)
+ ks2_serdes_lane_config(base, cfg->lane, SERDES_LANE_CFG_NUM, i);
+
+ return 0;
+}
+
+static void ks2_serdes_cmu_comlane_enable(u32 base, struct ks2_serdes *serdes)
+{
+ /* Bring SerDes out of Reset */
+ ks2_serdes_rmw(base + SERDES_CMU_REG_010(0), 0x0, SERDES_RESET);
+ if (serdes->intf == SERDES_PHY_PCSR)
+ ks2_serdes_rmw(base + SERDES_CMU_REG_010(1), 0x0, SERDES_RESET);
+
+ /* Enable CMU and COMLANE */
+ ks2_serdes_rmw(base + SERDES_CMU_REG_000(0), 0x03, 0x000000ff);
+ if (serdes->intf == SERDES_PHY_PCSR)
+ ks2_serdes_rmw(base + SERDES_CMU_REG_000(1), 0x03, 0x000000ff);
+
+ ks2_serdes_rmw(base + SERDES_COMLANE_REG_000, 0x5f, 0x000000ff);
+}
+
+static void ks2_serdes_pll_enable(u32 base, struct ks2_serdes *serdes)
+{
+ writel(serdes_cfg_pll_enable[serdes->intf],
+ base + SERDES_PLL_CTL_REG);
+}
+
+static void ks2_serdes_lane_reset(u32 base, u32 reset, u32 lane)
+{
+ if (reset)
+ ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane),
+ 0x1, SERDES_LANE_RESET);
+ else
+ ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane),
+ 0x0, SERDES_LANE_RESET);
+}
+
+static void ks2_serdes_lane_enable(u32 base,
+ struct ks2_serdes *serdes, u32 lane)
+{
+ /* Bring lane out of reset */
+ ks2_serdes_lane_reset(base, 0, lane);
+
+ writel(SERDES_LANE_EN_VAL(serdes_cfg_lane_enable, serdes->intf,
+ serdes->rate_mode),
+ base + SERDES_LANE_CTL_STATUS_REG(lane));
+
+ /* Set NES bit if Loopback Enabled */
+ if (serdes->loopback)
+ ks2_serdes_rmw(base + SERDES_LANE_REG_000(lane),
+ 0x1, SERDES_LANE_LOOPBACK);
+}
+
+int ks2_serdes_init(u32 base, struct ks2_serdes *serdes, u32 num_lanes)
+{
+ int i;
+ int ret = 0;
+
+ for (i = 0; i < ARRAY_SIZE(cfgs); i++)
+ if (serdes->clk == cfgs[i].clk && serdes->rate == cfgs[i].rate)
+ break;
+
+ if (i >= ARRAY_SIZE(cfgs)) {
+ puts("Cannot find keystone SerDes configuration");
+ return -EINVAL;
+ }
+
+ ks2_serdes_init_cfg(base, &cfgs[i], num_lanes);
+
+ ks2_serdes_cmu_comlane_enable(base, serdes);
+ for (i = 0; i < num_lanes; i++)
+ ks2_serdes_lane_enable(base, serdes, i);
+
+ ks2_serdes_pll_enable(base, serdes);
+
+ return ret;
+}
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index 026f680..be10269 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -12,6 +12,7 @@
#include <asm/gpio.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
+#include <asm/imx-common/spi.h>
#ifdef CONFIG_MX27
/* i.MX27 has a completely wrong register layout and register definitions in the
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index c9d2ed5..1c35929 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
# xhci
obj-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o
+obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o
obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
diff --git a/drivers/usb/host/xhci-keystone.c b/drivers/usb/host/xhci-keystone.c
new file mode 100644
index 0000000..05d338f
--- /dev/null
+++ b/drivers/usb/host/xhci-keystone.c
@@ -0,0 +1,329 @@
+/*
+ * USB 3.0 DRD Controller
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <usb.h>
+#include <asm/arch/psc_defs.h>
+#include <asm/io.h>
+#include <linux/usb/dwc3.h>
+#include <asm/arch/xhci-keystone.h>
+#include <asm-generic/errno.h>
+#include <linux/list.h>
+#include "xhci.h"
+
+struct kdwc3_irq_regs {
+ u32 revision; /* 0x000 */
+ u32 rsvd0[3];
+ u32 sysconfig; /* 0x010 */
+ u32 rsvd1[1];
+ u32 irq_eoi;
+ u32 rsvd2[1];
+ struct {
+ u32 raw_status;
+ u32 status;
+ u32 enable_set;
+ u32 enable_clr;
+ } irqs[16];
+};
+
+struct keystone_xhci {
+ struct xhci_hccr *hcd;
+ struct dwc3 *dwc3_reg;
+ struct xhci_hcor *hcor;
+ struct kdwc3_irq_regs *usbss;
+ struct keystone_xhci_phy *phy;
+};
+
+struct keystone_xhci keystone;
+
+static void keystone_xhci_phy_set(struct keystone_xhci_phy *phy)
+{
+ u32 val;
+
+ /*
+ * VBUSVLDEXTSEL has a default value of 1 in BootCfg but shouldn't.
+ * It should always be cleared because our USB PHY has an onchip VBUS
+ * analog comparator.
+ */
+ val = readl(&phy->phy_clock);
+ /* quit selecting the vbusvldextsel by default! */
+ val &= ~USB3_PHY_OTG_VBUSVLDECTSEL;
+ writel(val, &phy->phy_clock);
+}
+
+static void keystone_xhci_phy_unset(struct keystone_xhci_phy *phy)
+{
+ u32 val;
+
+ /* Disable the PHY REFCLK clock gate */
+ val = readl(&phy->phy_clock);
+ val &= ~USB3_PHY_REF_SSP_EN;
+ writel(val, &phy->phy_clock);
+}
+
+static void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
+{
+ clrsetbits_le32(&dwc3_reg->g_ctl,
+ DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG),
+ DWC3_GCTL_PRTCAPDIR(mode));
+}
+
+static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg)
+{
+ /* Before Resetting PHY, put Core in Reset */
+ setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET);
+
+ /* Assert USB3 PHY reset */
+ setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
+
+ /* Assert USB2 PHY reset */
+ setbits_le32(&dwc3_reg->g_usb2phycfg[0], DWC3_GUSB2PHYCFG_PHYSOFTRST);
+
+ mdelay(100);
+
+ /* Clear USB3 PHY reset */
+ clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
+
+ /* Clear USB2 PHY reset */
+ clrbits_le32(&dwc3_reg->g_usb2phycfg[0], DWC3_GUSB2PHYCFG_PHYSOFTRST);
+
+ /* After PHYs are stable we can take Core out of reset state */
+ clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET);
+}
+
+static int dwc3_core_init(struct dwc3 *dwc3_reg)
+{
+ u32 revision, val;
+ unsigned long t_rst;
+ unsigned int dwc3_hwparams1;
+
+ revision = readl(&dwc3_reg->g_snpsid);
+ /* This should read as U3 followed by revision number */
+ if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) {
+ puts("this is not a DesignWare USB3 DRD Core\n");
+ return -EINVAL;
+ }
+
+ /* issue device SoftReset too */
+ writel(DWC3_DCTL_CSFTRST, &dwc3_reg->d_ctl);
+
+ t_rst = get_timer(0);
+ do {
+ val = readl(&dwc3_reg->d_ctl);
+ if (!(val & DWC3_DCTL_CSFTRST))
+ break;
+ WATCHDOG_RESET();
+ } while (get_timer(t_rst) < 500);
+
+ if (val & DWC3_DCTL_CSFTRST) {
+ debug("Reset timed out\n");
+ return -2;
+ }
+
+ dwc3_core_soft_reset(dwc3_reg);
+
+ dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1);
+
+ val = readl(&dwc3_reg->g_ctl);
+ val &= ~DWC3_GCTL_SCALEDOWN_MASK;
+ val &= ~DWC3_GCTL_DISSCRAMBLE;
+ switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) {
+ case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
+ val &= ~DWC3_GCTL_DSBLCLKGTNG;
+ break;
+ default:
+ printf("No power optimization available\n");
+ }
+
+ /*
+ * WORKAROUND: DWC3 revisions <1.90a have a bug
+ * where the device can fail to connect at SuperSpeed
+ * and falls back to high-speed mode which causes
+ * the device to enter a Connect/Disconnect loop
+ */
+ if ((revision & DWC3_REVISION_MASK) < 0x190a)
+ val |= DWC3_GCTL_U2RSTECN;
+
+ writel(val, &dwc3_reg->g_ctl);
+
+ return 0;
+}
+
+static int keystone_xhci_core_init(struct dwc3 *dwc3_reg)
+{
+ int ret;
+
+ ret = dwc3_core_init(dwc3_reg);
+ if (ret) {
+ debug("failed to initialize core\n");
+ return -EINVAL;
+ }
+
+ /* We are hard-coding DWC3 core to Host Mode */
+ dwc3_set_mode(dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
+
+ return 0;
+}
+
+int xhci_hcd_init(int index,
+ struct xhci_hccr **ret_hccr, struct xhci_hcor **ret_hcor)
+{
+ u32 val;
+ int ret;
+ struct xhci_hccr *hcd;
+ struct xhci_hcor *hcor;
+ struct kdwc3_irq_regs *usbss;
+ struct keystone_xhci_phy *phy;
+
+ usbss = (struct kdwc3_irq_regs *)CONFIG_USB_SS_BASE;
+ phy = (struct keystone_xhci_phy *)CONFIG_DEV_USB_PHY_BASE;
+
+ /* Enable the PHY REFCLK clock gate with phy_ref_ssp_en = 1 */
+ val = readl(&(phy->phy_clock));
+ val |= USB3_PHY_REF_SSP_EN;
+ writel(val, &phy->phy_clock);
+
+ mdelay(100);
+
+ /* Release USB from reset */
+ ret = psc_enable_module(KS2_LPSC_USB);
+ if (ret) {
+ puts("Cannot enable USB module");
+ return -1;
+ }
+
+ mdelay(100);
+
+ /* Initialize usb phy */
+ keystone_xhci_phy_set(phy);
+
+ /* soft reset usbss */
+ writel(1, &usbss->sysconfig);
+ while (readl(&usbss->sysconfig) & 1)
+ ;
+
+ val = readl(&usbss->revision);
+ debug("usbss revision %x\n", val);
+
+ /* Initialize usb core */
+ hcd = (struct xhci_hccr *)CONFIG_USB_HOST_XHCI_BASE;
+ keystone.dwc3_reg = (struct dwc3 *)(CONFIG_USB_HOST_XHCI_BASE +
+ DWC3_REG_OFFSET);
+
+ keystone_xhci_core_init(keystone.dwc3_reg);
+
+ /* set register addresses */
+ hcor = (struct xhci_hcor *)((uint32_t)hcd +
+ HC_LENGTH(readl(&hcd->cr_capbase)));
+
+ debug("Keystone2-xhci: init hccr %08x and hcor %08x hc_length %d\n",
+ (u32)hcd, (u32)hcor,
+ (u32)HC_LENGTH(xhci_readl(&hcd->cr_capbase)));
+
+ keystone.usbss = usbss;
+ keystone.phy = phy;
+ keystone.hcd = hcd;
+ keystone.hcor = hcor;
+
+ *ret_hccr = hcd;
+ *ret_hcor = hcor;
+
+ return 0;
+}
+
+static int keystone_xhci_phy_suspend(void)
+{
+ int loop_cnt = 0;
+ struct xhci_hcor *hcor;
+ uint32_t *portsc_1 = NULL;
+ uint32_t *portsc_2 = NULL;
+ u32 val, usb2_pls, usb3_pls, event_q;
+ struct dwc3 *dwc3_reg = keystone.dwc3_reg;
+
+ /* set register addresses */
+ hcor = keystone.hcor;
+
+ /* Bypass Scrambling and Set Shorter Training sequence for simulation */
+ val = DWC3_GCTL_PWRDNSCALE(0x4b0) | DWC3_GCTL_PRTCAPDIR(0x2);
+ writel(val, &dwc3_reg->g_ctl);
+
+ /* GUSB2PHYCFG */
+ val = readl(&dwc3_reg->g_usb2phycfg[0]);
+
+ /* assert bit 6 (SusPhy) */
+ val |= DWC3_GUSB2PHYCFG_SUSPHY;
+ writel(val, &dwc3_reg->g_usb2phycfg[0]);
+
+ /* GUSB3PIPECTL */
+ val = readl(&dwc3_reg->g_usb3pipectl[0]);
+
+ /*
+ * assert bit 29 to allow PHY to go to suspend when idle
+ * and cause the USB3 SS PHY to enter suspend mode
+ */
+ val |= (BIT(29) | DWC3_GUSB3PIPECTL_SUSPHY);
+ writel(val, &dwc3_reg->g_usb3pipectl[0]);
+
+ /*
+ * Steps necessary to allow controller to suspend even when
+ * VBUS is HIGH:
+ * - Init DCFG[2:0] (DevSpd) to: 1=FS
+ * - Init GEVNTADR0 to point to an eventQ
+ * - Init GEVNTSIZ0 to 0x0100 to specify the size of the eventQ
+ * - Init DCTL::Run_nStop = 1
+ */
+ writel(0x00020001, &dwc3_reg->d_cfg);
+ /* TODO: local2global( (Uint32) eventQ )? */
+ writel((u32)&event_q, &dwc3_reg->g_evnt_buf[0].g_evntadrlo);
+ writel(0, &dwc3_reg->g_evnt_buf[0].g_evntadrhi);
+ writel(0x4, &dwc3_reg->g_evnt_buf[0].g_evntsiz);
+ /* Run */
+ writel(DWC3_DCTL_RUN_STOP, &dwc3_reg->d_ctl);
+
+ mdelay(100);
+
+ /* Wait for USB2 & USB3 PORTSC::PortLinkState to indicate suspend */
+ portsc_1 = (uint32_t *)(&hcor->portregs[0].or_portsc);
+ portsc_2 = (uint32_t *)(&hcor->portregs[1].or_portsc);
+ usb2_pls = 0;
+ usb3_pls = 0;
+ do {
+ ++loop_cnt;
+ usb2_pls = (readl(portsc_1) & PORT_PLS_MASK) >> 5;
+ usb3_pls = (readl(portsc_2) & PORT_PLS_MASK) >> 5;
+ } while (((usb2_pls != 0x4) || (usb3_pls != 0x4)) && loop_cnt < 1000);
+
+ if (usb2_pls != 0x4 || usb3_pls != 0x4) {
+ debug("USB suspend failed - PLS USB2=%02x, USB3=%02x\n",
+ usb2_pls, usb3_pls);
+ return -1;
+ }
+
+ debug("USB2 and USB3 PLS - Disabled, loop_cnt=%d\n", loop_cnt);
+ return 0;
+}
+
+void xhci_hcd_stop(int index)
+{
+ /* Disable USB */
+ if (keystone_xhci_phy_suspend())
+ return;
+
+ if (psc_disable_module(KS2_LPSC_USB)) {
+ debug("PSC disable module USB failed!\n");
+ return;
+ }
+
+ /* Disable PHY */
+ keystone_xhci_phy_unset(keystone.phy);
+
+/* memset(&keystone, 0, sizeof(struct keystone_xhci)); */
+ debug("xhci_hcd_stop OK.\n");
+}
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 476430d..1ec783d 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -352,10 +352,10 @@
"boot part 0 1;" \
"rootfs part 0 2;" \
"MLO fat 0 1;" \
- "MLO.raw mmc 0x100 0x100;" \
- "u-boot.img.raw mmc 0x300 0x400;" \
- "spl-os-args.raw mmc 0x80 0x80;" \
- "spl-os-image.raw mmc 0x900 0x2000;" \
+ "MLO.raw raw 0x100 0x100;" \
+ "u-boot.img.raw raw 0x300 0x400;" \
+ "spl-os-args.raw raw 0x80 0x80;" \
+ "spl-os-image.raw raw 0x900 0x2000;" \
"spl-os-args fat 0 1;" \
"spl-os-image fat 0 1;" \
"u-boot.img fat 0 1;" \
@@ -382,7 +382,7 @@
"fdt ram 0x80F80000 0x80000;" \
"ramdisk ram 0x81000000 0x4000000\0"
#define DFUARGS \
- "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
+ "dfu_alt_info_emmc=rawemmc raw 0 3751936\0" \
DFU_ALT_INFO_MMC \
DFU_ALT_INFO_RAM \
DFU_ALT_INFO_NAND
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 0707827..4472c3e 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -11,6 +11,9 @@
#define CONFIG_AM43XX
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_SAVEENV
+
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_SYS_CACHELINE_SIZE 32
@@ -82,7 +85,11 @@
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE "mmc"
+#define FAT_ENV_DEVICE_AND_PART "0:1"
+#define FAT_ENV_FILE "uboot.env"
+#define CONFIG_FAT_WRITE
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
@@ -103,7 +110,7 @@
#ifdef CONFIG_QSPI_BOOT
#define CONFIG_SYS_TEXT_BASE 0x30000000
-#undef CONFIG_ENV_IS_NOWHERE
+#undef CONFIG_ENV_IS_IN_FAT
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h
index 3502d10..7c8065a 100644
--- a/include/configs/k2e_evm.h
+++ b/include/configs/k2e_evm.h
@@ -34,4 +34,15 @@
/* NAND Configuration */
#define CONFIG_SYS_NAND_PAGE_2K
+/* Network */
+#define CONFIG_DRIVER_TI_KEYSTONE_NET
+#define CONFIG_TI_KSNAV
+#define CONFIG_KSNAV_PKTDMA_NETCP
+#define CONFIG_KSNET_NETCP_V1_5
+#define CONFIG_KSNET_CPSW_NUM_PORTS 9
+#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
+
+/* SerDes */
+#define CONFIG_TI_KEYSTONE_SERDES
+
#endif /* __CONFIG_K2E_EVM_H */
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index 8aa616d..034cbfd 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -36,5 +36,12 @@
/* Network */
#define CONFIG_DRIVER_TI_KEYSTONE_NET
+#define CONFIG_TI_KSNAV
+#define CONFIG_KSNAV_PKTDMA_NETCP
+#define CONFIG_KSNET_NETCP_V1_0
+#define CONFIG_KSNET_CPSW_NUM_PORTS 5
+
+/* SerDes */
+#define CONFIG_TI_KEYSTONE_SERDES
#endif /* __CONFIG_K2HK_EVM_H */
diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h
new file mode 100644
index 0000000..0e1f725
--- /dev/null
+++ b/include/configs/k2l_evm.h
@@ -0,0 +1,37 @@
+/*
+ * Configuration header file for TI's k2l-evm
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_K2L_EVM_H
+#define __CONFIG_K2L_EVM_H
+
+/* Platform type */
+#define CONFIG_SOC_K2L
+#define CONFIG_K2L_EVM
+
+/* U-Boot general configuration */
+#define CONFIG_SYS_PROMPT "K2L EVM # "
+
+#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\
+ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,4096\0"
+
+#define KS2_FDT_NAME "name_fdt=k2l-evm.dtb\0"
+#define KS2_ADDR_MON "addr_mon=0x0c140000\0"
+#define KS2_NAME_MON "name_mon=skern-k2l-evm.bin\0"
+#define NAME_UBOOT "name_uboot=u-boot-spi-k2l-evm.gph\0"
+#define NAME_UBI "name_ubi=k2l-evm-ubifs.ubi\0"
+
+#include <configs/ks2_evm.h>
+
+/* SPL SPI Loader Configuration */
+#define CONFIG_SPL_TEXT_BASE 0x0c100000
+
+/* NAND Configuration */
+#define CONFIG_SYS_NAND_PAGE_4K
+
+#endif /* __CONFIG_K2L_EVM_H */
diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h
index 137d9b0..b0c91d8 100644
--- a/include/configs/ks2_evm.h
+++ b/include/configs/ks2_evm.h
@@ -91,6 +91,8 @@
#define CONFIG_SYS_SPI2_NUM_CS 4
/* Network Configuration */
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MARVELL
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS
@@ -98,11 +100,46 @@
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_NET_RETRY_COUNT 32
#define CONFIG_NET_MULTI
-#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5
#define CONFIG_SYS_SGMII_REFCLK_MHZ 312
#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250
#define CONFIG_SYS_SGMII_RATESCALE 2
+/* Keyston Navigator Configuration */
+#define CONFIG_KSNAV_QM_BASE_ADDRESS KS2_QM_BASE_ADDRESS
+#define CONFIG_KSNAV_QM_CONF_BASE KS2_QM_CONF_BASE
+#define CONFIG_KSNAV_QM_DESC_SETUP_BASE KS2_QM_DESC_SETUP_BASE
+#define CONFIG_KSNAV_QM_STATUS_RAM_BASE KS2_QM_STATUS_RAM_BASE
+#define CONFIG_KSNAV_QM_INTD_CONF_BASE KS2_QM_INTD_CONF_BASE
+#define CONFIG_KSNAV_QM_PDSP1_CMD_BASE KS2_QM_PDSP1_CMD_BASE
+#define CONFIG_KSNAV_QM_PDSP1_CTRL_BASE KS2_QM_PDSP1_CTRL_BASE
+#define CONFIG_KSNAV_QM_PDSP1_IRAM_BASE KS2_QM_PDSP1_IRAM_BASE
+#define CONFIG_KSNAV_QM_MANAGER_QUEUES_BASE KS2_QM_MANAGER_QUEUES_BASE
+#define CONFIG_KSNAV_QM_MANAGER_Q_PROXY_BASE KS2_QM_MANAGER_Q_PROXY_BASE
+#define CONFIG_KSNAV_QM_QUEUE_STATUS_BASE KS2_QM_QUEUE_STATUS_BASE
+#define CONFIG_KSNAV_QM_LINK_RAM_BASE KS2_QM_LINK_RAM_BASE
+#define CONFIG_KSNAV_QM_REGION_NUM KS2_QM_REGION_NUM
+#define CONFIG_KSNAV_QM_QPOOL_NUM KS2_QM_QPOOL_NUM
+
+/* NETCP pktdma */
+#define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE KS2_NETCP_PDMA_CTRL_BASE
+#define CONFIG_KSNAV_NETCP_PDMA_TX_BASE KS2_NETCP_PDMA_TX_BASE
+#define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM KS2_NETCP_PDMA_TX_CH_NUM
+#define CONFIG_KSNAV_NETCP_PDMA_RX_BASE KS2_NETCP_PDMA_RX_BASE
+#define CONFIG_KSNAV_NETCP_PDMA_RX_CH_NUM KS2_NETCP_PDMA_RX_CH_NUM
+#define CONFIG_KSNAV_NETCP_PDMA_SCHED_BASE KS2_NETCP_PDMA_SCHED_BASE
+#define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_BASE KS2_NETCP_PDMA_RX_FLOW_BASE
+#define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_NUM KS2_NETCP_PDMA_RX_FLOW_NUM
+#define CONFIG_KSNAV_NETCP_PDMA_RX_FREE_QUEUE KS2_NETCP_PDMA_RX_FREE_QUEUE
+#define CONFIG_KSNAV_NETCP_PDMA_RX_RCV_QUEUE KS2_NETCP_PDMA_RX_RCV_QUEUE
+#define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE KS2_NETCP_PDMA_TX_SND_QUEUE
+
+/* Keystone net */
+#define CONFIG_KSNET_MAC_ID_BASE KS2_MAC_ID_BASE_ADDR
+#define CONFIG_KSNET_NETCP_BASE KS2_NETCP_BASE
+#define CONFIG_KSNET_SERDES_SGMII_BASE KS2_SGMII_SERDES_BASE
+#define CONFIG_KSNET_SERDES_SGMII2_BASE KS2_SGMII_SERDES2_BASE
+#define CONFIG_KSNET_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES
+
/* AEMIF */
#define CONFIG_TI_AEMIF
#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE
@@ -153,6 +190,20 @@
"1024k(bootloader)ro,512k(params)ro," \
"-(ubifs)"
+/* USB Configuration */
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_KEYSTONE
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_FS_FAT
+#define CONFIG_SYS_CACHELINE_SIZE 64
+#define CONFIG_USB_SS_BASE KS2_USB_SS_BASE
+#define CONFIG_USB_HOST_XHCI_BASE KS2_USB_HOST_XHCI_BASE
+#define CONFIG_DEV_USB_PHY_BASE KS2_DEV_USB_PHY_BASE
+#define CONFIG_USB_PHY_CFG_BASE KS2_USB_PHY_CFG_BASE
+
/* U-Boot command configuration */
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
@@ -166,9 +217,11 @@
#define CONFIG_CMD_UBIFS
#define CONFIG_CMD_SF
#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_USB
/* U-Boot general configuration */
#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_MISC_INIT_R
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_PBSIZE 2048
#define CONFIG_SYS_MAXARGS 16
@@ -265,8 +318,4 @@
#include <asm/arch/clock.h>
#define CONFIG_SYS_HZ_CLOCK clk_get_rate(KS2_CLK1_6)
-/* Maximum memory size for relocated U-boot at the end of the DDR3 memory
- which is NOT applicable for DDR ECC test */
-#define CONFIG_MAX_UBOOT_MEM_SIZE (4 << 20) /* 4 MiB */
-
#endif /* __CONFIG_KS2_EVM_H */
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 2d93d6c..c81e9e9 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -260,4 +260,21 @@
#define CONFIG_CMD_CACHE
#endif
+/* Framebuffer */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+
#endif /* __MX6QSABRE_COMMON_CONFIG_H */
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index e666ebb..938030d 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -32,23 +32,6 @@
#define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */
#endif
-/* Framebuffer */
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_IPUV3
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IPUV3_CLK 260000000
-#define CONFIG_IMX_HDMI
-#define CONFIG_IMX_VIDEO_SKIP
-
#define CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index b17e495..c58636a 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -35,6 +35,13 @@
/* TWL4030 LED */
#define CONFIG_TWL4030_LED
+/* USB EHCI */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+
/* Initialize GPIOs by default */
#define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 is in GPIO Bank 2 */
#define CONFIG_OMAP3_GPIO_3 /* GPIO64..95 is in GPIO Bank 3 */
@@ -44,6 +51,7 @@
/* commands to include */
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_USB
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
#undef CONFIG_CMD_IMI /* iminfo */
#undef CONFIG_CMD_NFS /* NFS support */
@@ -131,8 +139,9 @@
"bootz ${loadaddr} - ${fdtaddr}\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
- "nand read ${loadaddr} linux; " \
- "bootm ${loadaddr}\0" \
+ "if nand read ${loadaddr} linux; then " \
+ "bootm ${loadaddr};" \
+ "fi;\0" \
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev}; if mmc rescan; then " \
diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index 071880f..d7696bd 100644
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -47,7 +47,7 @@
#define CONFIG_SPI_FLASH_SST
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS 2
-#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(1, 3)<<8))
+#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 25000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 49504dc..83a1bcd 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -22,7 +22,7 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MISC_INIT_R
+#define CONFIG_ARCH_EARLY_INIT_R
#define CONFIG_SYS_NO_FLASH
#define CONFIG_CLOCKS
@@ -157,6 +157,21 @@
#define CONFIG_BAUDRATE 115200
/*
+ * USB
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_DWC2
+#define CONFIG_USB_STORAGE
+/*
+ * NOTE: User must define either of the following to select which
+ * of the two USB controllers available on SoCFPGA to use.
+ * The DWC2 driver doesn't support multiple USB controllers.
+ * #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB0_ADDRESS
+ * #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS
+ */
+#endif
+
+/*
* U-Boot environment
*/
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
@@ -167,16 +182,21 @@
/*
* SPL
+ *
+ * SRAM Memory layout:
+ *
+ * 0xFFFF_0000 ...... Start of SRAM
+ * 0xFFFF_xxxx ...... Top of stack (grows down)
+ * 0xFFFF_yyyy ...... Malloc area
+ * 0xFFFF_zzzz ...... Global Data
+ * 0xFFFF_FF00 ...... End of SRAM
*/
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_RAM_DEVICE
-#define CONFIG_SPL_TEXT_BASE 0xFFFF0000
-#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
-#define CONFIG_SPL_STACK_SIZE (4 * 1024)
-#define CONFIG_SPL_MALLOC_SIZE (5 * 1024) /* FIXME */
-#define CONFIG_SYS_SPL_MALLOC_START ((unsigned long) (&__malloc_start))
-#define CONFIG_SYS_SPL_MALLOC_SIZE (&__malloc_end - &__malloc_start)
+#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
+#define CONFIG_SYS_SPL_MALLOC_START CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SYS_SPL_MALLOC_SIZE (5 * 1024)
#define CHUNKSZ_CRC32 (1 * 1024) /* FIXME: ewww */
#define CONFIG_CRC32_VERIFY
diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
index 60d7e20..942738c 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -55,10 +55,8 @@
#if defined(CONFIG_CMD_NET)
#define CONFIG_EMAC_BASE SOCFPGA_EMAC1_ADDRESS
#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII
-#define CONFIG_EPHY0_PHY_ADDR 0
/* PHY */
-#define CONFIG_EPHY1_PHY_ADDR 4
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
#define CONFIG_KSZ9021_CLK_SKEW_ENV "micrel-ksz9021-clk-skew"
diff --git a/include/linux/usb/dwc3.h b/include/linux/usb/dwc3.h
index 97d179a..7edc760 100644
--- a/include/linux/usb/dwc3.h
+++ b/include/linux/usb/dwc3.h
@@ -41,7 +41,8 @@
#define DWC3_REG_OFFSET 0xC100
struct g_event_buffer {
- u64 g_evntadr;
+ u32 g_evntadrlo;
+ u32 g_evntadrhi;
u32 g_evntsiz;
u32 g_evntcount;
};
@@ -185,4 +186,9 @@ struct dwc3 { /* offset: 0xC100 */
#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff)
#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000)
+/* Device Control Register */
+#define DWC3_DCTL_RUN_STOP (1 << 31)
+#define DWC3_DCTL_CSFTRST (1 << 30)
+#define DWC3_DCTL_LSFTRST (1 << 29)
+
#endif /* __DWC3_H_ */
diff --git a/tools/socfpgaimage.c b/tools/socfpgaimage.c
index 396d8a5..917873e 100644
--- a/tools/socfpgaimage.c
+++ b/tools/socfpgaimage.c
@@ -74,12 +74,12 @@ static uint16_t hdr_checksum(struct socfpga_header *header)
static void build_header(uint8_t *buf, uint8_t version, uint8_t flags,
uint16_t length_bytes)
{
- header.validation = htole32(VALIDATION_WORD);
+ header.validation = cpu_to_le32(VALIDATION_WORD);
header.version = version;
header.flags = flags;
- header.length_u32 = htole16(length_bytes/4);
+ header.length_u32 = cpu_to_le16(length_bytes/4);
header.zero = 0;
- header.checksum = htole16(hdr_checksum(&header));
+ header.checksum = cpu_to_le16(hdr_checksum(&header));
memcpy(buf, &header, sizeof(header));
}
@@ -92,12 +92,12 @@ static int verify_header(const uint8_t *buf)
{
memcpy(&header, buf, sizeof(header));
- if (le32toh(header.validation) != VALIDATION_WORD)
+ if (le32_to_cpu(header.validation) != VALIDATION_WORD)
return -1;
- if (le16toh(header.checksum) != hdr_checksum(&header))
+ if (le16_to_cpu(header.checksum) != hdr_checksum(&header))
return -1;
- return le16toh(header.length_u32) * 4;
+ return le16_to_cpu(header.length_u32) * 4;
}
/* Sign the buffer and return the signed buffer size */
@@ -116,7 +116,7 @@ static int sign_buffer(uint8_t *buf,
/* Calculate and apply the CRC */
calc_crc = ~pbl_crc32(0, (char *)buf, len);
- *((uint32_t *)(buf + len)) = htole32(calc_crc);
+ *((uint32_t *)(buf + len)) = cpu_to_le32(calc_crc);
if (!pad_64k)
return len + 4;
@@ -150,7 +150,7 @@ static int verify_buffer(const uint8_t *buf)
calc_crc = ~pbl_crc32(0, (const char *)buf, len);
- buf_crc = le32toh(*((uint32_t *)(buf + len)));
+ buf_crc = le32_to_cpu(*((uint32_t *)(buf + len)));
if (buf_crc != calc_crc) {
fprintf(stderr, "CRC32 does not match (%08x != %08x)\n",