diff options
| -rw-r--r-- | arch/arm/Kconfig | 5 | ||||
| -rw-r--r-- | board/hale/tt01/Kconfig | 15 | ||||
| -rw-r--r-- | board/hale/tt01/MAINTAINERS | 6 | ||||
| -rw-r--r-- | board/hale/tt01/Makefile | 10 | ||||
| -rw-r--r-- | board/hale/tt01/lowlevel_init.S | 16 | ||||
| -rw-r--r-- | board/hale/tt01/tt01.c | 243 | ||||
| -rw-r--r-- | configs/tt01_defconfig | 4 | ||||
| -rw-r--r-- | include/configs/tt01.h | 266 |
8 files changed, 0 insertions, 565 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ad3f554..4b684eb 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -244,10 +244,6 @@ config TARGET_MX31PDK select CPU_ARM1136 select SUPPORT_SPL -config TARGET_TT01 - bool "Support tt01" - select CPU_ARM1136 - config TARGET_WOODBURN bool "Support woodburn" select CPU_ARM1136 @@ -764,7 +760,6 @@ source "board/freescale/mx53smd/Kconfig" source "board/freescale/vf610twr/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" -source "board/hale/tt01/Kconfig" source "board/hisilicon/hikey/Kconfig" source "board/imx31_phycore/Kconfig" source "board/isee/igep0033/Kconfig" diff --git a/board/hale/tt01/Kconfig b/board/hale/tt01/Kconfig deleted file mode 100644 index af9828a..0000000 --- a/board/hale/tt01/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_TT01 - -config SYS_BOARD - default "tt01" - -config SYS_VENDOR - default "hale" - -config SYS_SOC - default "mx31" - -config SYS_CONFIG_NAME - default "tt01" - -endif diff --git a/board/hale/tt01/MAINTAINERS b/board/hale/tt01/MAINTAINERS deleted file mode 100644 index 2f582be..0000000 --- a/board/hale/tt01/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -TT01 BOARD -M: Helmut Raiger <helmut.raiger@hale.at> -S: Maintained -F: board/hale/tt01/ -F: include/configs/tt01.h -F: configs/tt01_defconfig diff --git a/board/hale/tt01/Makefile b/board/hale/tt01/Makefile deleted file mode 100644 index e06a040..0000000 --- a/board/hale/tt01/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2009 HALE electronic <helmut.raiger@hale.at> -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := tt01.o -obj-y += lowlevel_init.o diff --git a/board/hale/tt01/lowlevel_init.S b/board/hale/tt01/lowlevel_init.S deleted file mode 100644 index 54132a1..0000000 --- a/board/hale/tt01/lowlevel_init.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com> - * (C) Copyright 2011 Helmut Raiger <helmut.raiger@hale.at> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <config.h> -#include <asm/arch/imx-regs.h> -#include <asm/macro.h> - -.globl lowlevel_init -lowlevel_init: - /* Also setup the Peripheral Port Remap register inside the core */ - ldr r0, =ARM_PPMRR /* start from AIPS 2GB region */ - mcr p15, 0, r0, c15, c2, 4 - mov pc, lr diff --git a/board/hale/tt01/tt01.c b/board/hale/tt01/tt01.c deleted file mode 100644 index 011aed0..0000000 --- a/board/hale/tt01/tt01.c +++ /dev/null @@ -1,243 +0,0 @@ -/* - * (C) Copyright 2011 HALE electronic <helmut.raiger@hale.at> - * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com> - * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <command.h> -#include <power/pmic.h> -#include <fsl_pmic.h> -#include <mc13783.h> -#include <asm/arch/clock.h> -#include <asm/arch/sys_proto.h> -#include <asm/io.h> -#include <errno.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define BOARD_STRING "Board: HALE TT-01" - -/* Clock configuration */ -#define CCM_CCMR_SETUP 0x074B0BF5 - -static void board_setup_clocks(void) -{ - struct clock_control_regs *ccm = (struct clock_control_regs *) CCM_BASE; - volatile int wait = 0x10000; - - writel(CCM_CCMR_SETUP, &ccm->ccmr); - while (wait--) - ; - - writel(CCM_CCMR_SETUP | CCMR_MPE, &ccm->ccmr); - writel((CCM_CCMR_SETUP | CCMR_MPE) & ~CCMR_MDS, &ccm->ccmr); - - /* Set up clock to 532MHz */ - writel(PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | PDR0_PER_PODF(7) | - PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | - PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | - PDR0_MCU_PODF(0), &ccm->pdr0); - writel(PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | PLL_MFN(12), - &ccm->mpctl); - writel(PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1), - &ccm->spctl); -} - -/* DRAM configuration */ - -#define ESDMISC_MDDR_SETUP 0x00000004 -#define ESDMISC_MDDR_RESET_DL 0x0000000c -/* - * decoding magic 0x6ac73a = 0b 0110 1010 1100 0111 0011 1010 below: - * tXP = 11, tWTR = 0, tRP = 10, tMRD = 10 - * tWR = 1, tRAS = 100, tRRD = 01, tCAS = 11 - * tRCD = 011, tRC = 010 - * note: all but tWTR (1), tRC (111) are reset defaults, - * the same values work in the jtag configuration - * - * Bluetechnix setup has 0x75e73a (for 128MB) = - * 0b 0111 0101 1110 0111 0011 1010 - * tXP = 11, tWTR = 1, tRP = 01, tMRD = 01 - * tWR = 1, tRAS = 110, tRRD = 01, tCAS = 11 - * tRCD = 011, tRC = 010 - */ -#define ESDCFG0_MDDR_SETUP 0x006ac73a -#define ESDCTL_ROW_COL (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2)) -#define ESDCTL_SETTINGS (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \ - ESDCTL_DSIZ(2) | ESDCTL_BL(1)) -#define ESDCTL_PRECHARGE (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE) -#define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH) -#define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG) -#define ESDCTL_RW ESDCTL_SETTINGS - -static void board_setup_sdram(void) -{ - u32 *pad; - struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR; - - /* - * setup pad control for the controller pins - * no loopback, no pull, no keeper, no open drain, - * standard input, standard drive, slow slew rate - */ - for (pad = (u32 *) IOMUXC_SW_PAD_CTL_SDCKE1_SDCLK_SDCLK_B; - pad <= (u32 *) IOMUXC_SW_PAD_CTL_VPG0_VPG1_A0; pad++) - *pad = 0; - - /* set up MX31 DDR Memory Controller */ - writel(ESDMISC_MDDR_SETUP, &esdc->misc); - writel(ESDCFG0_MDDR_SETUP, &esdc->cfg0); - - /* perform DDR init sequence for CSD0 */ - writel(ESDCTL_PRECHARGE, &esdc->ctl0); - writel(0x12344321, CSD0_BASE+0x0f00); - writel(ESDCTL_AUTOREFRESH, &esdc->ctl0); - writel(0x12344321, CSD0_BASE); - writel(0x12344321, CSD0_BASE); - writel(ESDCTL_LOADMODEREG, &esdc->ctl0); - writeb(0xda, CSD0_BASE+0x33); - writeb(0xff, CSD0_BASE+0x1000000); - writel(ESDCTL_RW, &esdc->ctl0); - writel(0xDEADBEEF, CSD0_BASE); - writel(ESDMISC_MDDR_RESET_DL, &esdc->misc); -} - -static void tt01_spi3_hw_init(void) -{ - /* CSPI3 */ - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_MISO, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_MOSI, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_SCLK, MUX_CTL_FUNC)); - /* CSPI3, SS0 = Atlas */ - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI2_SS0, MUX_CTL_ALT1)); - - /* start CSPI3 clock (3 = always on except if PLL off) */ - setbits_le32(CCM_CGR0, 3 << 16); -} - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -int board_early_init_f(void) -{ - /* CS4: FPGA incl. network controller */ - struct mxc_weimcs cs4 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 28, 1, 7, 6), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0) - }; - - /* this seems essential, won't start without, but why? */ - writel(IPU_CONF_DI_EN, (u32 *) IPU_CONF); - - board_setup_clocks(); - board_setup_sdram(); - mxc_setup_weimcs(4, &cs4); - - /* Setup UART2 and SPI3 pins */ - mx31_uart2_hw_init(); - tt01_spi3_hw_init(); - - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - return 0; -} - -int board_late_init(void) -{ -#ifdef CONFIG_HW_WATCHDOG - hw_watchdog_init(); -#endif - - return 0; -} - -int checkboard(void) -{ - puts(BOARD_STRING "\n"); - return 0; -} - -#ifdef CONFIG_MXC_MMC -int board_mmc_init(bd_t *bis) -{ - u32 val; - struct pmic *p; - int ret; - - /* - * this is the first driver to use the pmic, so call - * pmic_init() here. board_late_init() is too late for - * the MMC driver. - */ - - ret = pmic_init(I2C_PMIC); - if (ret) - return ret; - - p = pmic_get("FSL_PMIC"); - if (!p) - return -ENODEV; - - /* configure pins for SDHC1 only */ - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CLK, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CMD, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA0, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA1, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA2, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA3, MUX_CTL_FUNC)); - - /* turn on power V_MMC1 */ - if (pmic_reg_read(p, REG_MODE_1, &val) < 0) - pmic_reg_write(p, REG_MODE_1, val | VMMC1EN); - - return mxc_mmc_init(bis); -} -#endif - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC911X - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); -#endif - return rc; -} - -#ifdef CONFIG_CONSOLE_EXTRA_INFO -void video_get_info_str(int line_number, char *info) -{ - u32 srev = get_cpu_rev(); - - switch (line_number) { - case 2: - sprintf(info, " CPU : Freescale i.MX31 rev %d.%d%s at %d MHz", - (srev & 0xF0) >> 4, (srev & 0x0F), - ((srev & 0x8000) ? " unknown" : ""), - mxc_get_clock(MXC_ARM_CLK) / 1000000); - break; - case 3: - strcpy(info, " " BOARD_STRING); - break; - default: - info[0] = 0; - } -} -#endif diff --git a/configs/tt01_defconfig b/configs/tt01_defconfig deleted file mode 100644 index 08f9f7b..0000000 --- a/configs/tt01_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_TT01=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="TT01> " diff --git a/include/configs/tt01.h b/include/configs/tt01.h deleted file mode 100644 index ca1e2e2..0000000 --- a/include/configs/tt01.h +++ /dev/null @@ -1,266 +0,0 @@ -/* - * (C) Copyright 2011 HALE electronic <helmut.raiger@hale.at> - * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com> - * - * Configuration settings for the HALE TT-01 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/imx-regs.h> - -/* High Level Configuration Options */ -#define CONFIG_MX31 - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_MACH_TYPE 3726 /* not yet in mach-types.h */ -#define CONFIG_SYS_TEXT_BASE 0xA0000000 - - -/* - * Physical Memory Map: - * CS settings are defined by i.MX31: - * - CSD0 and CDS1 are 256MB each, starting at 0x80000000 and 0x9000000 - * - CS0 and CS1 are 128MB each, at A0000000 and A8000000 - * - CS2 to CS5 are 32MB each, at B0.., B2.., B4.., B6.. - * - * HALE set-up of the bluetechnix board for now is: - * - 128MB DDR (2x64MB, 2x16bit), connected to 32bit DDR ram interface - * - NOR-Flash (Spansion 32MB MCP, Flash+16MB PSRAM), 16bit interface at CS0 - * - S71WS256ND0BFWYM (and CS1 for 64MB S71WS512ND0 without PSRAM) - * the flash chip is a mirrorbit S29WS256N ! - * - the PSRAM is hooked to CS5 (0xB6000000) - * - Intel Strata Flash PF48F2000P0ZB00, 16bit interface at (CS0 or) CS1 - * - 64Mbit = 8MByte (will go away in the production set-up) - * - NAND-Flash NAND01GR3B2BZA6 at NAND-FC: - * 1Gbit=128MB, 2048+64 bytes/page, 64pages x 1024 blocks - * - Ethernet controller SMC9118 at CS4 via FPGA, 16bit interface - * - * u-boot will support the 32MB nor flash and the 128MB NAND flash, the PSRAM - * is not used right now. We should be able to reduce the SOM to NAND flash - * only and boot from there. - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD0_BASE -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) - -/* default load address, 1MB up the road */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1+0x100000) - -/* Size of malloc() pool, make sure possible frame buffer fits */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 10*1024*1024) - -/* memtest works on all but the last 1MB (u-boot) and malloc area */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END \ - (PHYS_SDRAM_1+(PHYS_SDRAM_1_SIZE-CONFIG_SYS_MALLOC_LEN-0x100000)) - -/* CFI FLASH driver setup */ -#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/cfi_flash.c */ -#define CONFIG_FLASH_SPANSION_S29WS_N -/* - * TODO: Bluetechnix (the supplier of the SOM) did define these values - * in their original version of u-boot (1.2 or so). This should be - * reviewed. - * - * #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE - * #define CONFIG_SYS_FLASH_PROTECTION - */ -#define CONFIG_SYS_FLASH_BASE CS0_BASE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (254+8) /* max number of sectors per chip */ - -/* - * FLASH and environment organization, only the Spansion chip is supported: - * - it has 254 * 128kB + 8 * 32kB blocks - * - this setup uses 4*32k+3*128k as monitor space = 0xA000 0000 to 0xA00F FFFF - * and 2 sectors with 128k as environment = - * A010 0000 to 0xA011 FFFF and 0xA012 0000 to 0xA013 FFFF - * - this could be less, but this is only for developer versions of the board - * and no-one is going to use the NOR flash anyway. - * - * Monitor is at the beginning of the NOR-Flash, 1MB reserved. Again this is - * way to large, but it avoids ENV overwrite (when updating u-boot) in case - * size breaks the next boundary (as it has with 128k). - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (1024 * 1024) - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (128 * 1024) - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - -/* Hardware drivers */ - -/* - * on TT-01 UART1 pins are used by Audio, so we use UART2 - * TT-01 implements a hardware that turns off components depending on - * the power level. In PL=1 the RS232 transceiver is usually off, - * make sure that the transceiver is enabled during PL=1 for testing! - */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART2_BASE - -#define CONFIG_MXC_SPI -#define CONFIG_MXC_GPIO - -/* MC13783 connected to CSPI3 and SS0 */ -#define CONFIG_POWER -#define CONFIG_POWER_SPI -#define CONFIG_POWER_FSL - -#define CONFIG_FSL_PMIC_BUS 2 -#define CONFIG_FSL_PMIC_CS 0 -#define CONFIG_FSL_PMIC_CLK 1000000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_FSL_PMIC_BITLEN 32 - -#define CONFIG_RTC_MC13XXX - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -/* console is UART2 on TT-01 */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* ethernet setup for the onboard smc9118 */ -#define CONFIG_MII -#define CONFIG_SMC911X -/* 16 bit, onboard ethernet, decoded via MACH-MX0 FPGA at 0x84200000 */ -#define CONFIG_SMC911X_BASE (CS4_BASE+0x200000) -#define CONFIG_SMC911X_16_BIT - -/* mmc driver */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_MXC_MMC -#define CONFIG_MXC_MCI_REGS_BASE SDHC1_BASE_ADDR - -/* video support */ -#define CONFIG_VIDEO -#define CONFIG_VIDEO_MX3 -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_LOGO -/* splash image won't work with NAND boot, use preboot script */ -#define CONFIG_VIDEO_SW_CURSOR -#define CONFIG_CONSOLE_EXTRA_INFO /* display additional board info */ -#define CONFIG_VGA_AS_SINGLE_DEVICE /* display is an output only device */ - -/* allow stdin, stdout and stderr variables to redirect output */ -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SILENT_CONSOLE /* UARTs used externally (release) */ -#define CONFIG_SYS_DEVICE_NULLDEV /* allow console to be turned off */ -#define CONFIG_PREBOOT - -/* allow decompressing max. 4MB */ -#define CONFIG_VIDEO_BMP_GZIP -/* this is not only used by cfb_console.c for the logo, but also in cmd_bmp.c */ -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (4*1024*1024) - -/* - * Command definition - */ -#define CONFIG_CMD_DATE -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NAND -/* - * #define CONFIG_CMD_NAND_LOCK_UNLOCK the NAND01... chip does not support - * the NAND_CMD_LOCK_STATUS command, however the NFC of i.MX31 supports - * a software locking scheme. - */ -#define CONFIG_CMD_BMP - -#define CONFIG_BOOTDELAY 3 - -/* - * currently a default setting for booting via script is implemented - * set user to login name and serverip to tftp host, define your - * boot behaviour in bootscript.loginname - * - * TT-01 board specific TFT setup (used by drivers/video/mx3fb.c) - * - * This set-up is for the L5F30947T04 by Epson, which is - * 800x480, 33MHz pixel clock, 60Hz vsync, 31.6kHz hsync - * sync must be set to: DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ -"videomode=epson\0" \ -"epson=video=ctfb:x:800,y:480,depth:16,mode:0,pclk:30076," \ - "le:215,ri:1,up:32,lo:13,hs:7,vs:10,sync:100663296,vmode:0\0" \ -"bootcmd=dhcp bootscript.${user}; source\0" - -#define CONFIG_BOOTP_SERVERIP /* tftp serverip not overruled by dhcp server */ -#define CONFIG_BOOTP_SEND_HOSTNAME /* if env-var 'hostname' is set, send it */ - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_HUSH_PARSER - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT)+16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_CMDLINE_EDITING - -/* MMC boot support */ -#define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - -#define CONFIG_NAND_MXC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* - * actually this is nothing someone wants to configure! - * CONFIG_SYS_NAND_BASE despite being passed to board_nand_init() - * is not used by the driver. - */ -#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR -#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR -#define CONFIG_MXC_NAND_HWECC - -/* the current u-boot driver does not use the nand flash setup! */ -#define CONFIG_SYS_NAND_LARGEPAGE -/* - * it's not 16 bit: - * #define CONFIG_SYS_NAND_BUSWIDTH_16BIT - * the current u-boot mxc_nand.c tries to auto-detect, but this only - * reads the boot settings during reset (which might be wrong) - */ - -#endif /* __CONFIG_H */ |