summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CREDITS5
-rw-r--r--MAINTAINERS5
-rwxr-xr-xMAKEALL3
-rw-r--r--Makefile31
-rw-r--r--board/astro/mcf5373l/Makefile44
-rw-r--r--board/astro/mcf5373l/astro.h44
-rw-r--r--board/astro/mcf5373l/config.mk27
-rw-r--r--board/astro/mcf5373l/fpga.c425
-rw-r--r--board/astro/mcf5373l/mcf5373l.c211
-rw-r--r--board/astro/mcf5373l/u-boot.lds142
-rw-r--r--board/bc3450/bc3450.c56
-rw-r--r--board/bc3450/mt48lc16m16a2-75.h13
-rw-r--r--board/canmb/canmb.c52
-rw-r--r--board/canmb/mt48lc16m32s2-75.h13
-rw-r--r--board/davinci/da830evm/da830evm.c2
-rw-r--r--board/esd/cpci5200/mt46v16m16-75.h5
-rw-r--r--board/esd/mecp5200/mt46v16m16-75.h5
-rw-r--r--board/esd/pf5200/mt46v16m16-75.h5
-rw-r--r--board/freescale/m5271evb/m5271evb.c12
-rw-r--r--board/freescale/m54455evb/m54455evb.c4
-rw-r--r--board/icecube/icecube.c60
-rw-r--r--board/icecube/mt46v16m16-75.h5
-rw-r--r--board/icecube/mt46v32m16.h5
-rw-r--r--board/icecube/mt48lc16m16a2-75.h13
-rw-r--r--board/jupiter/jupiter.c6
-rw-r--r--board/mcc200/mt46v16m16-75.h5
-rw-r--r--board/mcc200/mt48lc16m16a2-75.h13
-rw-r--r--board/mcc200/mt48lc16m32s2-75.h13
-rw-r--r--board/munices/mt48lc16m16a2-75.h13
-rw-r--r--board/pm520/mt46v16m16-75.h5
-rw-r--r--board/pm520/mt48lc16m16a2-75.h13
-rw-r--r--board/pm520/pm520.c60
-rw-r--r--board/total5200/mt48lc16m16a2-75.h13
-rw-r--r--board/total5200/mt48lc32m16a2-75.h5
-rw-r--r--board/total5200/sdram.c52
-rw-r--r--board/total5200/sdram.h5
-rw-r--r--board/total5200/total5200.c27
-rw-r--r--board/tqc/tqm5200/mt48lc16m16a2-75.h13
-rw-r--r--common/cmd_bdinfo.c4
-rw-r--r--common/cmd_bootm.c2
-rw-r--r--common/cmd_i2c.c158
-rw-r--r--common/cmd_mtdparts.c2
-rw-r--r--common/cmd_nand.c10
-rw-r--r--common/cmd_setexpr.c34
-rw-r--r--common/fdt_support.c219
-rw-r--r--common/main.c6
-rw-r--r--cpu/mcf5227x/cpu_init.c16
-rw-r--r--cpu/mcf5227x/start.S100
-rw-r--r--cpu/mcf523x/cpu_init.c26
-rw-r--r--cpu/mcf523x/start.S75
-rw-r--r--cpu/mcf52x2/cpu_init.c86
-rw-r--r--cpu/mcf52x2/start.S176
-rw-r--r--cpu/mcf532x/config.mk12
-rw-r--r--cpu/mcf532x/cpu_init.c39
-rw-r--r--cpu/mcf532x/speed.c2
-rw-r--r--cpu/mcf532x/start.S72
-rw-r--r--cpu/mcf5445x/cpu_init.c45
-rw-r--r--cpu/mcf5445x/start.S123
-rw-r--r--cpu/mcf547x_8x/cpu_init.c4
-rw-r--r--cpu/mcf547x_8x/start.S83
-rw-r--r--cpu/mpc5xxx/Makefile2
-rw-r--r--cpu/mpc5xxx/cpu.c7
-rw-r--r--cpu/mpc5xxx/cpu_init.c35
-rw-r--r--cpu/mpc5xxx/firmware_sc_task.impl.S364
-rw-r--r--cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S4
-rw-r--r--cpu/mpc5xxx/pci_mpc5200.c4
-rw-r--r--cpu/mpc5xxx/serial.c17
-rw-r--r--cpu/mpc5xxx/start.S8
-rw-r--r--cpu/mpc5xxx/usb_ohci.c7
-rw-r--r--cpu/mpc5xxx/usb_ohci.h5
-rw-r--r--drivers/fpga/spartan3.c54
-rw-r--r--drivers/input/ps2ser.c11
-rw-r--r--drivers/mtd/cfi_flash.c93
-rw-r--r--drivers/mtd/nand/atmel_nand.c265
-rw-r--r--drivers/mtd/nand/atmel_nand_ecc.h36
-rw-r--r--drivers/mtd/nand/davinci_nand.c128
-rw-r--r--drivers/net/mpc5xxx_fec.c10
-rw-r--r--drivers/serial/mcfuart.c4
-rw-r--r--include/asm-arm/arch-davinci/emif_defs.h77
-rw-r--r--include/asm-m68k/cache.h210
-rw-r--r--include/asm-m68k/immap_5253.h1
-rw-r--r--include/asm-m68k/m520x.h89
-rw-r--r--include/asm-m68k/m5227x.h108
-rw-r--r--include/asm-m68k/m5235.h4
-rw-r--r--include/asm-m68k/m5301x.h112
-rw-r--r--include/asm-m68k/m5445x.h56
-rw-r--r--include/configs/BC3450.h9
-rw-r--r--include/configs/EB+MCF-EV123.h12
-rw-r--r--include/configs/IceCube.h13
-rw-r--r--include/configs/M5208EVBE.h15
-rw-r--r--include/configs/M52277EVB.h13
-rw-r--r--include/configs/M5235EVB.h12
-rw-r--r--include/configs/M5249EVB.h15
-rw-r--r--include/configs/M5253DEMO.h26
-rw-r--r--include/configs/M5253EVBE.h15
-rw-r--r--include/configs/M5271EVB.h14
-rw-r--r--include/configs/M5272C3.h14
-rw-r--r--include/configs/M5275EVB.h36
-rw-r--r--include/configs/M5282EVB.h13
-rw-r--r--include/configs/M53017EVB.h17
-rw-r--r--include/configs/M5329EVB.h11
-rw-r--r--include/configs/M5373EVB.h11
-rw-r--r--include/configs/M54451EVB.h15
-rw-r--r--include/configs/M54455EVB.h17
-rw-r--r--include/configs/M5475EVB.h16
-rw-r--r--include/configs/M5485EVB.h16
-rw-r--r--include/configs/PM520.h11
-rw-r--r--include/configs/TASREG.h11
-rw-r--r--include/configs/TB5200.h5
-rw-r--r--include/configs/TQM5200.h5
-rw-r--r--include/configs/Total5200.h23
-rw-r--r--include/configs/aev.h5
-rw-r--r--include/configs/astro_mcf5373l.h400
-rw-r--r--include/configs/cobra5272.h13
-rw-r--r--include/configs/cpci5200.h11
-rw-r--r--include/configs/hmi1001.h5
-rw-r--r--include/configs/idmr.h13
-rw-r--r--include/configs/inka4x0.h5
-rw-r--r--include/configs/ipek01.h5
-rw-r--r--include/configs/manroland/mpc5200-common.h5
-rw-r--r--include/configs/mecp5200.h14
-rw-r--r--include/configs/o2dnt.h7
-rw-r--r--include/configs/pf5200.h11
-rw-r--r--include/configs/smmaco4.h5
-rw-r--r--include/configs/spieval.h5
-rw-r--r--include/configs/v38b.h2
-rw-r--r--include/fdt_support.h2
-rw-r--r--include/jffs2/load_kernel.h1
-rw-r--r--include/mpc5xxx.h69
-rw-r--r--include/mtd_node.h11
-rw-r--r--include/post.h5
-rw-r--r--include/spartan3.h1
-rw-r--r--include/xilinx.h1
-rw-r--r--lib_m68k/cache.c123
-rw-r--r--post/post.c17
135 files changed, 3296 insertions, 2240 deletions
diff --git a/CREDITS b/CREDITS
index 2471029..043ba6e 100644
--- a/CREDITS
+++ b/CREDITS
@@ -511,6 +511,11 @@ N: Martin Winistoerfer
E: martinwinistoerfer@gmx.ch
D: Port to MPC555/556 microcontrollers and support for cmi board
+N: David Wu
+E: support@arcturusnetworks.com
+D: Mercury Security EP2500
+W: http://www.arcturusnetworks.com
+
N: Ming-Len Wu
E: minglen_wu@techware.com.tw
D: Motorola MX1ADS board support
diff --git a/MAINTAINERS b/MAINTAINERS
index 80057ce..bb03f17 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -80,7 +80,6 @@ Torsten Demke <torsten.demke@fci.com>
Wolfgang Denk <wd@denx.de>
- IceCube_5100 MGT5100
IceCube_5200 MPC5200
ARIA MPC5121e
@@ -890,6 +889,10 @@ TsiChung Liew <Tsi-Chung.Liew@freescale.com>
M5475EVB mcf547x_8x
M5485EVB mcf547x_8x
+Wolfgang Wegner <w.wegner@astro-kom.de>
+
+ astro_mcf5373l MCF5373L
+
#########################################################################
# AVR32 Systems: #
# #
diff --git a/MAKEALL b/MAKEALL
index 5c303f9..a88c31e 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -61,7 +61,6 @@ LIST_5xxx=" \
EVAL5200 \
fo300 \
galaxy5200 \
- icecube_5100 \
icecube_5200 \
inka4x0 \
ipek01 \
@@ -76,7 +75,6 @@ LIST_5xxx=" \
pf5200 \
PM520 \
TB5200 \
- Total5100 \
Total5200 \
Total5200_Rev2 \
TQM5200 \
@@ -840,6 +838,7 @@ LIST_microblaze=" \
#########################################################################
LIST_coldfire=" \
+ astro_mcf5373l \
cobra5272 \
EB+MCF-EV123 \
EB+MCF-EV123_internal \
diff --git a/Makefile b/Makefile
index 67e62d7..c0e73de 100644
--- a/Makefile
+++ b/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2009
+# (C) Copyright 2000-2010
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -548,8 +548,7 @@ icecube_5200_LOWBOOT_config \
icecube_5200_LOWBOOT08_config \
icecube_5200_DDR_config \
icecube_5200_DDR_LOWBOOT_config \
-icecube_5200_DDR_LOWBOOT08_config \
-icecube_5100_config: unconfig
+icecube_5200_DDR_LOWBOOT08_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
@@ -568,14 +567,6 @@ icecube_5100_config: unconfig
{ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
$(XECHO) "... DDR memory revision" ; \
}
- @[ -z "$(findstring 5200,$@)" ] || \
- { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
- $(XECHO) "... with MPC5200 processor" ; \
- }
- @[ -z "$(findstring 5100,$@)" ] || \
- { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
- $(XECHO) "... with MGT5100 processor" ; \
- }
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
jupiter_config: unconfig
@@ -594,7 +585,6 @@ lite5200b_LOWBOOT_config: unconfig
@mkdir -p $(obj)board/icecube
@ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
@ $(XECHO) "... DDR memory revision"
- @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h
@ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h
@[ -z "$(findstring _PM_,$@)" ] || \
{ echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \
@@ -604,7 +594,6 @@ lite5200b_LOWBOOT_config: unconfig
{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
$(XECHO) "... with LOWBOOT configuration" ; \
}
- @ $(XECHO) "... with MPC5200B processor"
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
mcc200_config \
@@ -728,21 +717,12 @@ TOP5200_config: unconfig
@ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
-Total5100_config \
Total5200_config \
Total5200_lowboot_config \
Total5200_Rev2_config \
Total5200_Rev2_lowboot_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/total5200
- @[ -z "$(findstring 5100,$@)" ] || \
- { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
- $(XECHO) "... with MGT5100 processor" ; \
- }
- @[ -z "$(findstring 5200,$@)" ] || \
- { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
- $(XECHO) "... with MPC5200 processor" ; \
- }
@[ -n "$(findstring Rev,$@)" ] || \
{ echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
$(XECHO) "... revision 1 board" ; \
@@ -1993,6 +1973,10 @@ ZPC1900_config: unconfig
## Coldfire
#########################################################################
+astro_mcf5373l_config \
+astro_mcf5373l_RAM_config : unconfig
+ @$(MKCONFIG) -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro
+
M5208EVBE_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
@@ -2061,6 +2045,9 @@ EB+MCF-EV123_internal_config : unconfig
@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+EP2500_config: unconfig
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 ep2500 Mercury
+
idmr_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
diff --git a/board/astro/mcf5373l/Makefile b/board/astro/mcf5373l/Makefile
new file mode 100644
index 0000000..c7a1d05
--- /dev/null
+++ b/board/astro/mcf5373l/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o fpga.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/astro/mcf5373l/astro.h b/board/astro/mcf5373l/astro.h
new file mode 100644
index 0000000..b55a6f7
--- /dev/null
+++ b/board/astro/mcf5373l/astro.h
@@ -0,0 +1,44 @@
+#ifndef __ASTRO_H__
+#define __ASTRO_H__
+
+/* in mcf5373l.c */
+int rs_serial_init(int port, int baud);
+void astro_put_char(char ch);
+int astro_is_char(void);
+int astro_get_char(void);
+
+/* in fpga.c */
+int astro5373l_altera_load(void);
+int astro5373l_xilinx_load(void);
+
+/* data structures used for communication (update.c) */
+typedef struct card_id {
+ char card_type;
+ char hardware_version;
+ char software_version;
+ char software_subversion; /* " ","a".."z" */
+ char fpga_version_altera;
+ char fpga_version_xilinx;
+} card_id_t;
+
+typedef struct {
+ unsigned char mode;
+ unsigned char deviation;
+ unsigned short freq;
+} __attribute__ ((packed)) output_params_t;
+
+typedef struct {
+ unsigned short satfreq;
+ unsigned char satdatallg;
+ unsigned short symbolrate;
+ unsigned char viterbirate;
+ unsigned char symbolrate_l;
+ output_params_t output_params;
+ unsigned char reserve;
+ unsigned char card_error;
+ unsigned short dummy_ts_id;
+ unsigned char dummy_pat_ver;
+ unsigned char dummy_sdt_ver;
+} __attribute__ ((packed)) parameters_t;
+
+#endif /* __ASTRO_H__ */
diff --git a/board/astro/mcf5373l/config.mk b/board/astro/mcf5373l/config.mk
new file mode 100644
index 0000000..6316a30
--- /dev/null
+++ b/board/astro/mcf5373l/config.mk
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = $(CONFIG_TEXT_BASE)
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/astro/mcf5373l/fpga.c b/board/astro/mcf5373l/fpga.c
new file mode 100644
index 0000000..467461b
--- /dev/null
+++ b/board/astro/mcf5373l/fpga.c
@@ -0,0 +1,425 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Wegner, ASTRO Strobel Kommunikationssysteme GmbH,
+ * w.wegner@astro-kom.de
+ *
+ * based on the files by
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de
+ * and
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ * Keith Outwater, keith_outwater@mvis.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* Altera/Xilinx FPGA configuration support for the ASTRO "URMEL" board */
+
+#include <common.h>
+#include <watchdog.h>
+#include <altera.h>
+#include <ACEX1K.h>
+#include <spartan3.h>
+#include <command.h>
+#include <asm/immap_5329.h>
+#include <asm/io.h>
+#include "fpga.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int altera_pre_fn(int cookie)
+{
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+ unsigned char tmp_char;
+ unsigned short tmp_short;
+
+ /* first, set the required pins to GPIO function */
+ /* PAR_T0IN -> GPIO */
+ tmp_char = readb(&gpiop->par_timer);
+ tmp_char &= 0xfc;
+ writeb(tmp_char, &gpiop->par_timer);
+ /* all QSPI pins -> GPIO */
+ writew(0x0000, &gpiop->par_qspi);
+ /* U0RTS, U0CTS -> GPIO */
+ tmp_short = __raw_readw(&gpiop->par_uart);
+ tmp_short &= 0xfff3;
+ __raw_writew(tmp_short, &gpiop->par_uart);
+ /* all PWM pins -> GPIO */
+ writeb(0x00, &gpiop->par_pwm);
+ /* next, set data direction registers */
+ writeb(0x01, &gpiop->pddr_timer);
+ writeb(0x25, &gpiop->pddr_qspi);
+ writeb(0x0c, &gpiop->pddr_uart);
+ writeb(0x04, &gpiop->pddr_pwm);
+
+ /* ensure other SPI peripherals are deselected */
+ writeb(0x08, &gpiop->ppd_uart);
+ writeb(0x38, &gpiop->ppd_qspi);
+
+ /* CONFIG = 0 STATUS = 0 -> FPGA in reset state */
+ writeb(0xFB, &gpiop->pclrr_uart);
+ /* enable Altera configuration by clearing QSPI_CS2 and DT0IN */
+ writeb(0xFE, &gpiop->pclrr_timer);
+ writeb(0xDF, &gpiop->pclrr_qspi);
+ return FPGA_SUCCESS;
+}
+
+/* Set the state of CONFIG Pin */
+int altera_config_fn(int assert_config, int flush, int cookie)
+{
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+
+ if (assert_config)
+ writeb(0x04, &gpiop->ppd_uart);
+ else
+ writeb(0xFB, &gpiop->pclrr_uart);
+ return FPGA_SUCCESS;
+}
+
+/* Returns the state of STATUS Pin */
+int altera_status_fn(int cookie)
+{
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+
+ if (readb(&gpiop->ppd_pwm) & 0x08)
+ return FPGA_FAIL;
+ return FPGA_SUCCESS;
+}
+
+/* Returns the state of CONF_DONE Pin */
+int altera_done_fn(int cookie)
+{
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+
+ if (readb(&gpiop->ppd_pwm) & 0x20)
+ return FPGA_FAIL;
+ return FPGA_SUCCESS;
+}
+
+/*
+ * writes the complete buffer to the FPGA
+ * writing the complete buffer in one function is much faster,
+ * then calling it for every bit
+ */
+int altera_write_fn(void *buf, size_t len, int flush, int cookie)
+{
+ size_t bytecount = 0;
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+ unsigned char *data = (unsigned char *)buf;
+ unsigned char val = 0;
+ int i;
+ int len_40 = len / 40;
+
+ while (bytecount < len) {
+ val = data[bytecount++];
+ i = 8;
+ do {
+ writeb(0xFB, &gpiop->pclrr_qspi);
+ if (val & 0x01)
+ writeb(0x01, &gpiop->ppd_qspi);
+ else
+ writeb(0xFE, &gpiop->pclrr_qspi);
+ writeb(0x04, &gpiop->ppd_qspi);
+ val >>= 1;
+ i--;
+ } while (i > 0);
+
+ if (bytecount % len_40 == 0) {
+#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+ WATCHDOG_RESET();
+#endif
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
+ putc('.'); /* let them know we are alive */
+#endif
+#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
+ if (ctrlc())
+ return FPGA_FAIL;
+#endif
+ }
+ }
+ return FPGA_SUCCESS;
+}
+
+/* called, when programming is aborted */
+int altera_abort_fn(int cookie)
+{
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+
+ writeb(0x20, &gpiop->ppd_qspi);
+ writeb(0x08, &gpiop->ppd_uart);
+ return FPGA_SUCCESS;
+}
+
+/* called, when programming was succesful */
+int altera_post_fn(int cookie)
+{
+ return altera_abort_fn(cookie);
+}
+
+/*
+ * Note that these are pointers to code that is in Flash. They will be
+ * relocated at runtime.
+ * FIXME: relocation not yet working for coldfire, see below!
+ */
+Altera_CYC2_Passive_Serial_fns altera_fns = {
+ altera_pre_fn,
+ altera_config_fn,
+ altera_status_fn,
+ altera_done_fn,
+ altera_write_fn,
+ altera_abort_fn,
+ altera_post_fn
+};
+
+Altera_desc altera_fpga[CONFIG_FPGA_COUNT] = {
+ {Altera_CYC2,
+ passive_serial,
+ 85903,
+ (void *)&altera_fns,
+ NULL,
+ 0}
+};
+
+/* Initialize the fpga. Return 1 on success, 0 on failure. */
+int astro5373l_altera_load(void)
+{
+ int i;
+
+ for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
+ /*
+ * I did not yet manage to get relocation work properly,
+ * so set stuff here instead of static initialisation:
+ */
+ altera_fns.pre = altera_pre_fn;
+ altera_fns.config = altera_config_fn;
+ altera_fns.status = altera_status_fn;
+ altera_fns.done = altera_done_fn;
+ altera_fns.write = altera_write_fn;
+ altera_fns.abort = altera_abort_fn;
+ altera_fns.post = altera_post_fn;
+ altera_fpga[i].iface_fns = (void *)&altera_fns;
+ fpga_add(fpga_altera, &altera_fpga[i]);
+ }
+ return 1;
+}
+
+/* Set the FPGA's PROG_B line to the specified level */
+int xilinx_pgm_fn(int assert, int flush, int cookie)
+{
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+
+ if (assert)
+ writeb(0xFB, &gpiop->pclrr_uart);
+ else
+ writeb(0x04, &gpiop->ppd_uart);
+ return assert;
+}
+
+/*
+ * Test the state of the active-low FPGA INIT line. Return 1 on INIT
+ * asserted (low).
+ */
+int xilinx_init_fn(int cookie)
+{
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+
+ return (readb(&gpiop->ppd_pwm) & 0x08) == 0;
+}
+
+/* Test the state of the active-high FPGA DONE pin */
+int xilinx_done_fn(int cookie)
+{
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+
+ return (readb(&gpiop->ppd_pwm) & 0x20) >> 5;
+}
+
+/* Abort an FPGA operation */
+int xilinx_abort_fn(int cookie)
+{
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+ /* ensure all SPI peripherals and FPGAs are deselected */
+ writeb(0x08, &gpiop->ppd_uart);
+ writeb(0x01, &gpiop->ppd_timer);
+ writeb(0x38, &gpiop->ppd_qspi);
+ return FPGA_FAIL;
+}
+
+/*
+ * FPGA pre-configuration function. Just make sure that
+ * FPGA reset is asserted to keep the FPGA from starting up after
+ * configuration.
+ */
+int xilinx_pre_config_fn(int cookie)
+{
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+ unsigned char tmp_char;
+ unsigned short tmp_short;
+
+ /* first, set the required pins to GPIO function */
+ /* PAR_T0IN -> GPIO */
+ tmp_char = readb(&gpiop->par_timer);
+ tmp_char &= 0xfc;
+ writeb(tmp_char, &gpiop->par_timer);
+ /* all QSPI pins -> GPIO */
+ writew(0x0000, &gpiop->par_qspi);
+ /* U0RTS, U0CTS -> GPIO */
+ tmp_short = __raw_readw(&gpiop->par_uart);
+ tmp_short &= 0xfff3;
+ __raw_writew(tmp_short, &gpiop->par_uart);
+ /* all PWM pins -> GPIO */
+ writeb(0x00, &gpiop->par_pwm);
+ /* next, set data direction registers */
+ writeb(0x01, &gpiop->pddr_timer);
+ writeb(0x25, &gpiop->pddr_qspi);
+ writeb(0x0c, &gpiop->pddr_uart);
+ writeb(0x04, &gpiop->pddr_pwm);
+
+ /* ensure other SPI peripherals are deselected */
+ writeb(0x08, &gpiop->ppd_uart);
+ writeb(0x38, &gpiop->ppd_qspi);
+ writeb(0x01, &gpiop->ppd_timer);
+
+ /* CONFIG = 0, STATUS = 0 -> FPGA in reset state */
+ writeb(0xFB, &gpiop->pclrr_uart);
+ /* enable Xilinx configuration by clearing QSPI_CS2 and U0CTS */
+ writeb(0xF7, &gpiop->pclrr_uart);
+ writeb(0xDF, &gpiop->pclrr_qspi);
+ return 0;
+}
+
+/*
+ * FPGA post configuration function. Should perform a test if FPGA is running.
+ */
+int xilinx_post_config_fn(int cookie)
+{
+ int rc = 0;
+
+ /*
+ * no test yet
+ */
+ return rc;
+}
+
+int xilinx_clk_fn(int assert_clk, int flush, int cookie)
+{
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+
+ if (assert_clk)
+ writeb(0x04, &gpiop->ppd_qspi);
+ else
+ writeb(0xFB, &gpiop->pclrr_qspi);
+ return assert_clk;
+}
+
+int xilinx_wr_fn(int assert_write, int flush, int cookie)
+{
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+
+ if (assert_write)
+ writeb(0x01, &gpiop->ppd_qspi);
+ else
+ writeb(0xFE, &gpiop->pclrr_qspi);
+ return assert_write;
+}
+
+int xilinx_fastwr_fn(void *buf, size_t len, int flush, int cookie)
+{
+ size_t bytecount = 0;
+ gpio_t *gpiop = (gpio_t *)MMAP_GPIO;
+ unsigned char *data = (unsigned char *)buf;
+ unsigned char val = 0;
+ int i;
+ int len_40 = len / 40;
+
+ for (bytecount = 0; bytecount < len; bytecount++) {
+ val = *(data++);
+ for (i = 8; i > 0; i--) {
+ writeb(0xFB, &gpiop->pclrr_qspi);
+ if (val & 0x80)
+ writeb(0x01, &gpiop->ppd_qspi);
+ else
+ writeb(0xFE, &gpiop->pclrr_qspi);
+ writeb(0x04, &gpiop->ppd_qspi);
+ val <<= 1;
+ }
+ if (bytecount % len_40 == 0) {
+#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
+ WATCHDOG_RESET();
+#endif
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
+ putc('.'); /* let them know we are alive */
+#endif
+#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
+ if (ctrlc())
+ return FPGA_FAIL;
+#endif
+ }
+ }
+ return FPGA_SUCCESS;
+}
+
+/*
+ * Note that these are pointers to code that is in Flash. They will be
+ * relocated at runtime.
+ * FIXME: relocation not yet working for coldfire, see below!
+ */
+Xilinx_Spartan3_Slave_Serial_fns xilinx_fns = {
+ xilinx_pre_config_fn,
+ xilinx_pgm_fn,
+ xilinx_clk_fn,
+ xilinx_init_fn,
+ xilinx_done_fn,
+ xilinx_wr_fn,
+ 0,
+ xilinx_fastwr_fn
+};
+
+Xilinx_desc xilinx_fpga[CONFIG_FPGA_COUNT] = {
+ {Xilinx_Spartan3,
+ slave_serial,
+ XILINX_XC3S4000_SIZE,
+ (void *)&xilinx_fns,
+ 0}
+};
+
+/* Initialize the fpga. Return 1 on success, 0 on failure. */
+int astro5373l_xilinx_load(void)
+{
+ int i;
+
+ fpga_init();
+
+ for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
+ /*
+ * I did not yet manage to get relocation work properly,
+ * so set stuff here instead of static initialisation:
+ */
+ xilinx_fns.pre = xilinx_pre_config_fn;
+ xilinx_fns.pgm = xilinx_pgm_fn;
+ xilinx_fns.clk = xilinx_clk_fn;
+ xilinx_fns.init = xilinx_init_fn;
+ xilinx_fns.done = xilinx_done_fn;
+ xilinx_fns.wr = xilinx_wr_fn;
+ xilinx_fns.bwr = xilinx_fastwr_fn;
+ xilinx_fpga[i].iface_fns = (void *)&xilinx_fns;
+ fpga_add(fpga_xilinx, &xilinx_fpga[i]);
+ }
+ return 1;
+}
diff --git a/board/astro/mcf5373l/mcf5373l.c b/board/astro/mcf5373l/mcf5373l.c
new file mode 100644
index 0000000..3c09a21
--- /dev/null
+++ b/board/astro/mcf5373l/mcf5373l.c
@@ -0,0 +1,211 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * modified by Wolfgang Wegner <w.wegner@astro-kom.de> for ASTRO 5373l
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/m5329.h>
+#include <asm/immap_5329.h>
+#include <asm/io.h>
+
+/* needed for astro bus: */
+#include <asm/uart.h>
+#include "astro.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+extern void uart_port_conf(void);
+
+int checkboard(void)
+{
+ puts("Board: ");
+ puts("ASTRO MCF5373L (Urmel) Board\n");
+ return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+ sdram_t *sdp = (sdram_t *)(MMAP_SDRAM);
+
+ /*
+ * GPIO configuration for bus should be set correctly from reset,
+ * so we do not care! First, set up address space: at this point,
+ * we should be running from internal SRAM;
+ * so use CONFIG_SYS_SDRAM_BASE as the base address for SDRAM,
+ * and do not care where it is
+ */
+ __raw_writel((CONFIG_SYS_SDRAM_BASE & 0xFFF00000) | 0x00000018,
+ &sdp->cs0);
+ __raw_writel((CONFIG_SYS_SDRAM_BASE & 0xFFF00000) | 0x00000000,
+ &sdp->cs1);
+ /*
+ * I am not sure from the data sheet, but it seems burst length
+ * has to be 8 for the 16 bit data bus we use;
+ * so these values are for BL = 8
+ */
+ __raw_writel(0x33211530, &sdp->cfg1);
+ __raw_writel(0x56570000, &sdp->cfg2);
+ /* send PrechargeALL, REF and IREF remain cleared! */
+ __raw_writel(0xE1462C02, &sdp->ctrl);
+ udelay(1);
+ /* refresh SDRAM twice */
+ __raw_writel(0xE1462C04, &sdp->ctrl);
+ udelay(1);
+ __raw_writel(0xE1462C04, &sdp->ctrl);
+ /* init MR */
+ __raw_writel(0x008D0000, &sdp->mode);
+ /* initialize EMR */
+ __raw_writel(0x80010000, &sdp->mode);
+ /* wait until DLL is locked */
+ udelay(1);
+ /*
+ * enable automatic refresh, lock mode register,
+ * clear iref and ipall
+ */
+ __raw_writel(0x71462C00, &sdp->ctrl);
+ /* Dummy write to start SDRAM */
+ writel(0, CONFIG_SYS_SDRAM_BASE);
+#endif
+
+ /*
+ * for get_ram_size() to work, both CS areas have to be
+ * configured, i.e. CS1 has to be explicitely disabled, else
+ * probing for memory will cause the SDRAM bus to hang!
+ * (Do not rely on the SDCS register(s) being set to 0x00000000
+ * during reset as stated in the data sheet.)
+ */
+ return get_ram_size((unsigned long *)CONFIG_SYS_SDRAM_BASE,
+ 0x80000000 - CONFIG_SYS_SDRAM_BASE);
+}
+
+#define UART_BASE MMAP_UART0
+int rs_serial_init(int port, int baud)
+{
+ uart_t *uart;
+ u32 counter;
+
+ switch (port) {
+ case 0:
+ uart = (uart_t *)(MMAP_UART0);
+ break;
+ case 1:
+ uart = (uart_t *)(MMAP_UART1);
+ break;
+ case 2:
+ uart = (uart_t *)(MMAP_UART2);
+ break;
+ default:
+ uart = (uart_t *)(MMAP_UART0);
+ }
+
+ uart_port_conf();
+
+ /* write to SICR: SIM2 = uart mode,dcd does not affect rx */
+ writeb(UART_UCR_RESET_RX, &uart->ucr);
+ writeb(UART_UCR_RESET_TX, &uart->ucr);
+ writeb(UART_UCR_RESET_ERROR, &uart->ucr);
+ writeb(UART_UCR_RESET_MR, &uart->ucr);
+ __asm__ ("nop");
+
+ writeb(0, &uart->uimr);
+
+ /* write to CSR: RX/TX baud rate from timers */
+ writeb(UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK, &uart->ucsr);
+
+ writeb(UART_UMR_BC_8 | UART_UMR_PM_NONE, &uart->umr);
+ writeb(UART_UMR_SB_STOP_BITS_1, &uart->umr);
+
+ /* Setting up BaudRate */
+ counter = (u32) (gd->bus_clk / (baud));
+ counter >>= 5;
+
+ /* write to CTUR: divide counter upper byte */
+ writeb((u8) ((counter & 0xff00) >> 8), &uart->ubg1);
+ /* write to CTLR: divide counter lower byte */
+ writeb((u8) (counter & 0x00ff), &uart->ubg2);
+
+ writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr);
+
+ return 0;
+}
+
+void astro_put_char(char ch)
+{
+ uart_t *uart;
+ unsigned long timer;
+
+ uart = (uart_t *)(MMAP_UART0);
+ /*
+ * Wait for last character to go. Timeout of 6ms should
+ * be enough for our lowest baud rate of 2400.
+ */
+ timer = get_timer(0);
+ while (get_timer(timer) < 6) {
+ if (readb(&uart->usr) & UART_USR_TXRDY)
+ break;
+ }
+ writeb(ch, &uart->utb);
+
+ return;
+}
+
+int astro_is_char(void)
+{
+ uart_t *uart;
+
+ uart = (uart_t *)(MMAP_UART0);
+ return readb(&uart->usr) & UART_USR_RXRDY;
+}
+
+int astro_get_char(void)
+{
+ uart_t *uart;
+
+ uart = (uart_t *)(MMAP_UART0);
+ while (!(readb(&uart->usr) & UART_USR_RXRDY)) ;
+ return readb(&uart->urb);
+}
+
+int misc_init_r(void)
+{
+ int retval = 0;
+
+ puts("Configure Xilinx FPGA...");
+ retval = astro5373l_xilinx_load();
+ if (!retval) {
+ puts("failed!\n");
+ return retval;
+ }
+ puts("done\n");
+
+ puts("Configure Altera FPGA...");
+ retval = astro5373l_altera_load();
+ if (!retval) {
+ puts("failed!\n");
+ return retval;
+ }
+ puts("done\n");
+
+ return retval;
+}
diff --git a/board/astro/mcf5373l/u-boot.lds b/board/astro/mcf5373l/u-boot.lds
new file mode 100644
index 0000000..a9a4e0a
--- /dev/null
+++ b/board/astro/mcf5373l/u-boot.lds
@@ -0,0 +1,142 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mcf532x/start.o (.text)
+ lib_m68k/traps.o (.text)
+ lib_m68k/interrupts.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/zlib.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/env_embedded.o (.text)
+
+ *(.text)
+/* *(.fixup)*/
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+
+ .reloc :
+ {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ _sbss = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .;
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c
index 6fb0096..3117b5f 100644
--- a/board/bc3450/bc3450.c
+++ b/board/bc3450/bc3450.c
@@ -104,7 +104,6 @@ static void sdram_start (int hi_addr)
* is something else than 0x00000000.
*/
-#if defined(CONFIG_MPC5200)
phys_size_t initdram (int board_type)
{
ulong dramsize = 0;
@@ -204,57 +203,6 @@ phys_size_t initdram (int board_type)
return dramsize;
}
-#elif defined(CONFIG_MGT5100)
-
-phys_size_t initdram (int board_type)
-{
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup and enable SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
- *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff; /* 2G */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
- /* address select register */
- *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
- __asm__ volatile ("sync");
-
- /* find RAM size */
- sdram_start(0);
- test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- sdram_start(1);
- test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* set SDRAM end address according to size */
- *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* Retrieve amount of SDRAM available */
- dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
int checkboard (void)
{
#if defined (CONFIG_TQM5200)
@@ -276,10 +224,6 @@ void flash_preinit(void)
* Note that CS_BOOT cannot be cleared when
* executing in flash.
*/
-#if defined(CONFIG_MGT5100)
- *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-#endif
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
diff --git a/board/bc3450/mt48lc16m16a2-75.h b/board/bc3450/mt48lc16m16a2-75.h
index 3f1e169..48b4321 100644
--- a/board/bc3450/mt48lc16m16a2-75.h
+++ b/board/bc3450/mt48lc16m16a2-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
/* #define SDRAM_MODE 0x008D0000 */ /* CAS latency 2 */
@@ -33,15 +32,3 @@
/*#define SDRAM_CONFIG1 0xD7322800 */ /* SDRAM controller bug workaround */
#define SDRAM_CONFIG2 0x8AD70000
/*#define SDRAM_CONFIG2 0xDDD70000 */ /* SDRAM controller bug workaround */
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/canmb/canmb.c b/board/canmb/canmb.c
index dce07bf..6ddc858 100644
--- a/board/canmb/canmb.c
+++ b/board/canmb/canmb.c
@@ -81,7 +81,6 @@ static void sdram_start (int hi_addr)
* is something else than 0x00000000.
*/
-#if defined(CONFIG_MPC5200)
phys_size_t initdram (int board_type)
{
ulong dramsize = 0;
@@ -183,57 +182,6 @@ phys_size_t initdram (int board_type)
return dramsize + dramsize2;
}
-#elif defined(CONFIG_MGT5100)
-
-phys_size_t initdram (int board_type)
-{
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup and enable SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
- *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
- /* address select register */
- *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
- __asm__ volatile ("sync");
-
- /* find RAM size */
- sdram_start(0);
- test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- sdram_start(1);
- test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* set SDRAM end address according to size */
- *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* Retrieve amount of SDRAM available */
- dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
int checkboard (void)
{
puts ("Board: CANMB\n");
diff --git a/board/canmb/mt48lc16m32s2-75.h b/board/canmb/mt48lc16m32s2-75.h
index ffdf039..1547725 100644
--- a/board/canmb/mt48lc16m32s2-75.h
+++ b/board/canmb/mt48lc16m32s2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/davinci/da830evm/da830evm.c b/board/davinci/da830evm/da830evm.c
index ed668af..6385443 100644
--- a/board/davinci/da830evm/da830evm.c
+++ b/board/davinci/da830evm/da830evm.c
@@ -150,7 +150,7 @@ int board_init(void)
DAVINCI_ABCR_RHOLD(0) |
DAVINCI_ABCR_TA(2) |
DAVINCI_ABCR_ASIZE_8BIT),
- &davinci_emif_regs->AB2CR);
+ &davinci_emif_regs->ab2cr);
#endif
/* arch number of the board */
diff --git a/board/esd/cpci5200/mt46v16m16-75.h b/board/esd/cpci5200/mt46v16m16-75.h
index 22d0a55..cf63806 100644
--- a/board/esd/cpci5200/mt46v16m16-75.h
+++ b/board/esd/cpci5200/mt46v16m16-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/esd/mecp5200/mt46v16m16-75.h b/board/esd/mecp5200/mt46v16m16-75.h
index 22d0a55..cf63806 100644
--- a/board/esd/mecp5200/mt46v16m16-75.h
+++ b/board/esd/mecp5200/mt46v16m16-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/esd/pf5200/mt46v16m16-75.h b/board/esd/pf5200/mt46v16m16-75.h
index 22d0a55..cf63806 100644
--- a/board/esd/pf5200/mt46v16m16-75.h
+++ b/board/esd/pf5200/mt46v16m16-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/freescale/m5271evb/m5271evb.c b/board/freescale/m5271evb/m5271evb.c
index 5505cc4..446f102 100644
--- a/board/freescale/m5271evb/m5271evb.c
+++ b/board/freescale/m5271evb/m5271evb.c
@@ -47,6 +47,7 @@ phys_size_t initdram (int board_type) {
MCF_GPIO_SDRAM_SDWE | MCF_GPIO_SDRAM_SCAS |
MCF_GPIO_SDRAM_SRAS | MCF_GPIO_SDRAM_SCKE |
MCF_GPIO_SDRAM_SDCS_11);
+ asm(" nop");
/*
* Check to see if the SDRAM has already been initialized
@@ -55,8 +56,9 @@ phys_size_t initdram (int board_type) {
if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE)) {
/* Initialize DRAM Control Register: DCR */
mbar_writeShort(MCF_SDRAMC_DCR,
- MCF_SDRAMC_DCR_RTIM(0x01)
- | MCF_SDRAMC_DCR_RC(0x30));
+ MCF_SDRAMC_DCR_RTIM(2)
+ | MCF_SDRAMC_DCR_RC(0x2E));
+ asm(" nop");
/*
* Initialize DACR0
@@ -70,15 +72,18 @@ phys_size_t initdram (int board_type) {
| MCF_SDRAMC_DACRn_CASL(1)
| MCF_SDRAMC_DACRn_CBM(3)
| MCF_SDRAMC_DACRn_PS(0));
+ asm(" nop");
/* Initialize DMR0 */
mbar_writeLong(MCF_SDRAMC_DMR0,
MCF_SDRAMC_DMRn_BAM_16M
| MCF_SDRAMC_DMRn_V);
+ asm(" nop");
/* Set IP bit in DACR */
mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
| MCF_SDRAMC_DACRn_IP);
+ asm(" nop");
/* Wait at least 20ns to allow banks to precharge */
for (i = 0; i < 5; i++)
@@ -86,6 +91,7 @@ phys_size_t initdram (int board_type) {
/* Write to this block to initiate precharge */
*(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5;
+ asm(" nop");
/* Set RE bit in DACR */
mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
@@ -98,6 +104,7 @@ phys_size_t initdram (int board_type) {
/* Finish the configuration by issuing the MRS */
mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
| MCF_SDRAMC_DACRn_MRS);
+ asm(" nop");
/*
* Write to the SDRAM Mode Register A0-A11 = 0x400
@@ -109,6 +116,7 @@ phys_size_t initdram (int board_type) {
* Burst Length = 1
*/
*(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xa5a5a5a5;
+ asm(" nop");
}
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c
index 293b5b0..2a84514 100644
--- a/board/freescale/m54455evb/m54455evb.c
+++ b/board/freescale/m54455evb/m54455evb.c
@@ -107,7 +107,7 @@ int ide_preinit(void)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
- gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_MASK) | 0x10;
+ gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_UNMASK) | 0x10;
gpio->par_feci2c |=
(gpio->par_feci2c & 0xF0FF) | (GPIO_PAR_FECI2C_MDC1_ATA_DIOR |
GPIO_PAR_FECI2C_MDIO1_ATA_DIOW);
@@ -185,7 +185,7 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
info->flash_id = 0x01000000;
info->portwidth = 1;
info->chipwidth = 1;
- info->buffer_size = 32;
+ info->buffer_size = 1;
info->erase_blk_tout = 16384;
info->write_tout = 2;
info->buffer_write_tout = 5;
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index 7524461..47b2195 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -134,7 +134,6 @@ static void sdram_start (int hi_addr)
* is something else than 0x00000000.
*/
-#if defined(CONFIG_MPC5200)
phys_size_t initdram (int board_type)
{
ulong dramsize = 0;
@@ -258,65 +257,12 @@ phys_size_t initdram (int board_type)
return dramsize + dramsize2;
}
-#elif defined(CONFIG_MGT5100)
-
-phys_size_t initdram (int board_type)
-{
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup and enable SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
- *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
- /* address select register */
- *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
- __asm__ volatile ("sync");
-
- /* find RAM size */
- sdram_start(0);
- test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- sdram_start(1);
- test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* set SDRAM end address according to size */
- *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* Retrieve amount of SDRAM available */
- dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
int checkboard (void)
{
#if defined (CONFIG_LITE5200B)
puts ("Board: Freescale Lite5200B\n");
-#elif defined(CONFIG_MPC5200)
+#else
puts ("Board: Motorola MPC5200 (IceCube)\n");
-#elif defined(CONFIG_MGT5100)
- puts ("Board: Motorola MGT5100 (IceCube)\n");
#endif
return 0;
}
@@ -329,10 +275,6 @@ void flash_preinit(void)
* Note that CS_BOOT cannot be cleared when
* executing in flash.
*/
-#if defined(CONFIG_MGT5100)
- *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-#endif
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
diff --git a/board/icecube/mt46v16m16-75.h b/board/icecube/mt46v16m16-75.h
index 4c0f9a7..eb85740 100644
--- a/board/icecube/mt46v16m16-75.h
+++ b/board/icecube/mt46v16m16-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/icecube/mt46v32m16.h b/board/icecube/mt46v32m16.h
index de2b48b..519bf6d 100644
--- a/board/icecube/mt46v32m16.h
+++ b/board/icecube/mt46v32m16.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/icecube/mt48lc16m16a2-75.h b/board/icecube/mt48lc16m16a2-75.h
index ffdf039..1547725 100644
--- a/board/icecube/mt48lc16m16a2-75.h
+++ b/board/icecube/mt48lc16m16a2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c
index 6e752c6..967aabd 100644
--- a/board/jupiter/jupiter.c
+++ b/board/jupiter/jupiter.c
@@ -227,10 +227,6 @@ void flash_preinit(void)
* Note that CS_BOOT cannot be cleared when
* executing in flash.
*/
-#if defined(CONFIG_MGT5100)
- *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-#endif
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
@@ -248,10 +244,8 @@ void flash_afterinit(ulong size)
*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
}
-#if defined(CONFIG_MPC5200)
*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
*(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-#endif
}
int update_flash_size (int flash_size)
diff --git a/board/mcc200/mt46v16m16-75.h b/board/mcc200/mt46v16m16-75.h
index f650faa..423febe 100644
--- a/board/mcc200/mt46v16m16-75.h
+++ b/board/mcc200/mt46v16m16-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/mcc200/mt48lc16m16a2-75.h b/board/mcc200/mt48lc16m16a2-75.h
index ffdf039..1547725 100644
--- a/board/mcc200/mt48lc16m16a2-75.h
+++ b/board/mcc200/mt48lc16m16a2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/mcc200/mt48lc16m32s2-75.h b/board/mcc200/mt48lc16m32s2-75.h
index ffdf039..1547725 100644
--- a/board/mcc200/mt48lc16m32s2-75.h
+++ b/board/mcc200/mt48lc16m32s2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/munices/mt48lc16m16a2-75.h b/board/munices/mt48lc16m16a2-75.h
index ffdf039..1547725 100644
--- a/board/munices/mt48lc16m16a2-75.h
+++ b/board/munices/mt48lc16m16a2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/pm520/mt46v16m16-75.h b/board/pm520/mt46v16m16-75.h
index f650faa..423febe 100644
--- a/board/pm520/mt46v16m16-75.h
+++ b/board/pm520/mt46v16m16-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
@@ -31,7 +30,3 @@
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
diff --git a/board/pm520/mt48lc16m16a2-75.h b/board/pm520/mt48lc16m16a2-75.h
index ffdf039..1547725 100644
--- a/board/pm520/mt48lc16m16a2-75.h
+++ b/board/pm520/mt48lc16m16a2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c
index 9da1041..d691434 100644
--- a/board/pm520/pm520.c
+++ b/board/pm520/pm520.c
@@ -84,7 +84,6 @@ static void sdram_start (int hi_addr)
* is something else than 0x00000000.
*/
-#if defined(CONFIG_MPC5200)
phys_size_t initdram (int board_type)
{
ulong dramsize = 0;
@@ -186,64 +185,9 @@ phys_size_t initdram (int board_type)
return dramsize + dramsize2;
}
-#elif defined(CONFIG_MGT5100)
-
-phys_size_t initdram (int board_type)
-{
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup and enable SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
- *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
- /* address select register */
- *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
- __asm__ volatile ("sync");
-
- /* find RAM size */
- sdram_start(0);
- test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- sdram_start(1);
- test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* set SDRAM end address according to size */
- *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* Retrieve amount of SDRAM available */
- dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
int checkboard (void)
{
-#if defined(CONFIG_MPC5200)
puts ("Board: MicroSys PM520 \n");
-#elif defined(CONFIG_MGT5100)
- puts ("Board: MicroSys PM510 \n");
-#endif
return 0;
}
@@ -255,10 +199,6 @@ void flash_preinit(void)
* Note that CS_BOOT cannot be cleared when
* executing in flash.
*/
-#if defined(CONFIG_MGT5100)
- *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-#endif
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
diff --git a/board/total5200/mt48lc16m16a2-75.h b/board/total5200/mt48lc16m16a2-75.h
index 5b0923e..ae237c6 100644
--- a/board/total5200/mt48lc16m16a2-75.h
+++ b/board/total5200/mt48lc16m16a2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/total5200/mt48lc32m16a2-75.h b/board/total5200/mt48lc32m16a2-75.h
index 4b5ac80..cb4b43d 100644
--- a/board/total5200/mt48lc32m16a2-75.h
+++ b/board/total5200/mt48lc32m16a2-75.h
@@ -28,13 +28,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x514F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#else
-#error CONFIG_MPC5200 is not defined
-#endif
diff --git a/board/total5200/sdram.c b/board/total5200/sdram.c
index dc4c6f1..d883eb6 100644
--- a/board/total5200/sdram.c
+++ b/board/total5200/sdram.c
@@ -76,7 +76,6 @@ static void mpc5xxx_sdram_start (sdram_conf_t *sdram_conf, int hi_addr)
* is something else than 0x00000000.
*/
-#if defined(CONFIG_MPC5200)
long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
{
ulong dramsize = 0;
@@ -174,54 +173,3 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
return dramsize + dramsize2;
}
-
-#elif defined(CONFIG_MGT5100)
-
-long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
-{
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup and enable SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
- *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = sdram_conf->config1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = sdram_conf->config2;
-
- /* address select register */
- *(vu_long *)MPC5XXX_SDRAM_XLBSEL = sdram_conf->addrsel;
- __asm__ volatile ("sync");
-
- /* find RAM size */
- mpc5xxx_sdram_start(sdram_conf, 0);
- test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- mpc5xxx_sdram_start(sdram_conf, 1);
- test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- mpc5xxx_sdram_start(sdram_conf, 0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* set SDRAM end address according to size */
- *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* Retrieve amount of SDRAM available */
- dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/total5200/sdram.h b/board/total5200/sdram.h
index bc21e1d..396a190 100644
--- a/board/total5200/sdram.h
+++ b/board/total5200/sdram.h
@@ -28,12 +28,7 @@ typedef struct {
ulong control;
ulong config1;
ulong config2;
-#if defined(CONFIG_MPC5200)
ulong tapdelay;
-#endif
-#if defined(CONFIG_MGT5100)
- ulong addrsel;
-#endif
} sdram_conf_t;
long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf);
diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c
index c524d63..61b5b80 100644
--- a/board/total5200/total5200.c
+++ b/board/total5200/total5200.c
@@ -47,26 +47,17 @@ phys_size_t initdram (int board_type)
sdram_conf.control = SDRAM_CONTROL;
sdram_conf.config1 = SDRAM_CONFIG1;
sdram_conf.config2 = SDRAM_CONFIG2;
-#if defined(CONFIG_MPC5200)
sdram_conf.tapdelay = 0;
-#endif
-#if defined(CONFIG_MGT5100)
- sdram_conf.addrsel = SDRAM_ADDRSEL;
-#endif
return mpc5xxx_sdram_init (&sdram_conf);
}
int checkboard (void)
{
-#if defined(CONFIG_MPC5200)
#if CONFIG_TOTAL5200_REV==2
puts ("Board: Total5200 Rev.2 ");
#else
puts ("Board: Total5200 ");
#endif
-#elif defined(CONFIG_MGT5100)
- puts ("Board: Total5100 ");
-#endif
/*
* Retrieve FPGA Revision.
@@ -85,20 +76,6 @@ int checkboard (void)
return 0;
}
-#if defined(CONFIG_MGT5100)
-int board_early_init_r(void)
-{
- /*
- * Now, when we are in RAM, enable CS0
- * because CS_BOOT cannot be written.
- */
- *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-
- return 0;
-}
-#endif
-
#ifdef CONFIG_PCI
static struct pci_controller hose;
@@ -266,9 +243,7 @@ static const S1D_REGS init_regs [] =
void video_get_info_str (int line_number, char *info)
{
if (line_number == 1) {
-#ifdef CONFIG_MGT5100
- strcpy (info, " Total5100");
-#elif CONFIG_TOTAL5200_REV==1
+#if CONFIG_TOTAL5200_REV==1
strcpy (info, " Total5200");
#elif CONFIG_TOTAL5200_REV==2
strcpy (info, " Total5200 Rev.2");
diff --git a/board/tqc/tqm5200/mt48lc16m16a2-75.h b/board/tqc/tqm5200/mt48lc16m16a2-75.h
index 3f1e169..48b4321 100644
--- a/board/tqc/tqm5200/mt48lc16m16a2-75.h
+++ b/board/tqc/tqm5200/mt48lc16m16a2-75.h
@@ -23,7 +23,6 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
/* #define SDRAM_MODE 0x008D0000 */ /* CAS latency 2 */
@@ -33,15 +32,3 @@
/*#define SDRAM_CONFIG1 0xD7322800 */ /* SDRAM controller bug workaround */
#define SDRAM_CONFIG2 0x8AD70000
/*#define SDRAM_CONFIG2 0xDDD70000 */ /* SDRAM controller bug workaround */
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index f8400bc..d22eb66 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR;
static void print_num(const char *, ulong);
-#if !defined(CONFIG_ARM) || defined(CONFIG_CMD_NET)
+#if !(defined(CONFIG_ARM) || defined(CONFIG_M68K)) || defined(CONFIG_CMD_NET)
static void print_eth(int idx);
#endif
@@ -350,7 +350,7 @@ static void print_num(const char *name, ulong value)
printf ("%-12s= 0x%08lX\n", name, value);
}
-#if !defined(CONFIG_ARM) || defined(CONFIG_CMD_NET)
+#if !(defined(CONFIG_ARM) || defined(CONFIG_M68K)) || defined(CONFIG_CMD_NET)
static void print_eth(int idx)
{
char name[10], *val;
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 23ab0c4..827d542 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -462,7 +462,7 @@ static int bootm_start_standalone(ulong iflag, int argc, char *argv[])
/* we overload the cmd field with our state machine info instead of a
* function pointer */
-cmd_tbl_t cmd_bootm_sub[] = {
+static cmd_tbl_t cmd_bootm_sub[] = {
U_BOOT_CMD_MKENT(start, 0, 1, (void *)BOOTM_STATE_START, "", ""),
U_BOOT_CMD_MKENT(loados, 0, 1, (void *)BOOTM_STATE_LOADOS, "", ""),
#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 62cbd33..ee9577c 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -154,6 +154,63 @@ int i2c_set_bus_speed(unsigned int)
*/
#define DISP_LINE_LEN 16
+/*
+ * Syntax:
+ * i2c read {i2c_chip} {devaddr}{.0, .1, .2} {len} {memaddr}
+ */
+
+int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ u_char chip;
+ uint devaddr, alen, length;
+ u_char *memaddr;
+ int j;
+
+ if (argc != 5) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ /*
+ * I2C chip address
+ */
+ chip = simple_strtoul(argv[1], NULL, 16);
+
+ /*
+ * I2C data address within the chip. This can be 1 or
+ * 2 bytes long. Some day it might be 3 bytes long :-).
+ */
+ devaddr = simple_strtoul(argv[2], NULL, 16);
+ alen = 1;
+ for (j = 0; j < 8; j++) {
+ if (argv[2][j] == '.') {
+ alen = argv[2][j+1] - '0';
+ if (alen > 3) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+ break;
+ } else if (argv[2][j] == '\0')
+ break;
+ }
+
+ /*
+ * Length is the number of objects, not number of bytes.
+ */
+ length = simple_strtoul(argv[3], NULL, 16);
+
+ /*
+ * memaddr is the address where to store things in memory
+ */
+ memaddr = (u_char *)simple_strtoul(argv[4], NULL, 16);
+
+ if (i2c_read(chip, devaddr, alen, memaddr, length) != 0) {
+ puts ("Error reading the chip.\n");
+ return 1;
+ }
+ return 0;
+}
+
int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
u_char chip;
@@ -193,7 +250,7 @@ int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
- if (alen > 4) {
+ if (alen > 3) {
cmd_usage(cmdtp);
return 1;
}
@@ -287,7 +344,7 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
- if (alen > 4) {
+ if (alen > 3) {
cmd_usage(cmdtp);
return 1;
}
@@ -361,7 +418,7 @@ int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
- if (alen > 4) {
+ if (alen > 3) {
cmd_usage(cmdtp);
return 1;
}
@@ -451,7 +508,7 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[])
for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
- if (alen > 4) {
+ if (alen > 3) {
cmd_usage(cmdtp);
return 1;
}
@@ -607,7 +664,7 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
for (j = 0; j < 8; j++) {
if (argv[2][j] == '.') {
alen = argv[2][j+1] - '0';
- if (alen > 4) {
+ if (alen > 3) {
cmd_usage(cmdtp);
return 1;
}
@@ -1242,46 +1299,60 @@ int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return ret;
}
-int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+int do_i2c_mm(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- /* Strip off leading 'i2c' command argument */
- argc--;
- argv++;
+ return mod_i2c_mem (cmdtp, 1, flag, argc, argv);
+}
+
+int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ return mod_i2c_mem (cmdtp, 0, flag, argc, argv);
+}
+
+int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ return 0;
+}
+static cmd_tbl_t cmd_i2c_sub[] = {
#if defined(CONFIG_I2C_MUX)
- if (!strncmp(argv[0], "bu", 2))
- return do_i2c_add_bus(cmdtp, flag, argc, argv);
+ U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_add_bus, "", ""),
#endif /* CONFIG_I2C_MUX */
- if (!strncmp(argv[0], "sp", 2))
- return do_i2c_bus_speed(cmdtp, flag, argc, argv);
+ U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
#if defined(CONFIG_I2C_MULTI_BUS)
- if (!strncmp(argv[0], "de", 2))
- return do_i2c_bus_num(cmdtp, flag, argc, argv);
+ U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
#endif /* CONFIG_I2C_MULTI_BUS */
- if (!strncmp(argv[0], "md", 2))
- return do_i2c_md(cmdtp, flag, argc, argv);
- if (!strncmp(argv[0], "mm", 2))
- return mod_i2c_mem (cmdtp, 1, flag, argc, argv);
- if (!strncmp(argv[0], "mw", 2))
- return do_i2c_mw(cmdtp, flag, argc, argv);
- if (!strncmp(argv[0], "nm", 2))
- return mod_i2c_mem (cmdtp, 0, flag, argc, argv);
- if (!strncmp(argv[0], "cr", 2))
- return do_i2c_crc(cmdtp, flag, argc, argv);
- if (!strncmp(argv[0], "pr", 2))
- return do_i2c_probe(cmdtp, flag, argc, argv);
- if (!strncmp(argv[0], "re", 2)) {
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- return 0;
- }
- if (!strncmp(argv[0], "lo", 2))
- return do_i2c_loop(cmdtp, flag, argc, argv);
+ U_BOOT_CMD_MKENT(loop, 3, 1, do_i2c_loop, "", ""),
+ U_BOOT_CMD_MKENT(md, 3, 1, do_i2c_md, "", ""),
+ U_BOOT_CMD_MKENT(mm, 2, 1, do_i2c_mm, "", ""),
+ U_BOOT_CMD_MKENT(mw, 3, 1, do_i2c_mw, "", ""),
+ U_BOOT_CMD_MKENT(nm, 2, 1, do_i2c_nm, "", ""),
+ U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""),
+ U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""),
+ U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""),
#if defined(CONFIG_CMD_SDRAM)
- if (!strncmp(argv[0], "sd", 2))
- return do_sdram(cmdtp, flag, argc, argv);
+ U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""),
#endif
- cmd_usage(cmdtp);
- return 0;
+ U_BOOT_CMD_MKENT(speed, 1, 1, do_i2c_bus_speed, "", ""),
+};
+
+int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ cmd_tbl_t *c;
+
+ /* Strip off leading 'i2c' command argument */
+ argc--;
+ argv++;
+
+ c = find_cmd_tbl(argv[0], &cmd_i2c_sub[0], ARRAY_SIZE(cmd_i2c_sub));
+
+ if (c) {
+ return c->cmd(cmdtp, flag, argc, argv);
+ } else {
+ cmd_usage(cmdtp);
+ return 1;
+ }
}
/***************************************************/
@@ -1289,29 +1360,28 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
i2c, 6, 1, do_i2c,
"I2C sub-system",
- "speed [speed] - show or set I2C bus speed\n"
#if defined(CONFIG_I2C_MUX)
- "i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\n"
+ "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c "
#endif /* CONFIG_I2C_MUX */
+ "crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
#if defined(CONFIG_I2C_MULTI_BUS)
"i2c dev [dev] - show or set current I2C bus\n"
#endif /* CONFIG_I2C_MULTI_BUS */
+ "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
"i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
"i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
- "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
"i2c probe - show devices on the I2C bus\n"
+ "i2c read chip address[.0, .1, .2] length memaddress - read to memory \n"
"i2c reset - re-init the I2C Controller\n"
- "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device"
#if defined(CONFIG_CMD_SDRAM)
- "\n"
- "i2c sdram chip - print SDRAM configuration information"
+ "i2c sdram chip - print SDRAM configuration information\n"
#endif
+ "i2c speed [speed] - show or set I2C bus speed"
);
#if defined(CONFIG_I2C_MUX)
-
int i2c_mux_add_device(I2C_MUX_DEVICE *dev)
{
I2C_MUX_DEVICE *devtmp = i2c_mux_devices;
diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c
index 20fed2a..0b5f747 100644
--- a/common/cmd_mtdparts.c
+++ b/common/cmd_mtdparts.c
@@ -776,7 +776,7 @@ static int device_del(struct mtd_device *dev)
* @param num device number
* @return NULL if requested device does not exist
*/
-static struct mtd_device* device_find(u8 type, u8 num)
+struct mtd_device *device_find(u8 type, u8 num)
{
struct list_head *entry;
struct mtd_device *dev_tmp;
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 075a8af..9b0c930 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -327,8 +327,14 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
"are sure of what you are doing!\n"
"\nReally scrub this NAND flash? <y/N>\n");
- if (getc() == 'y' && getc() == '\r') {
- opts.scrub = 1;
+ if (getc() == 'y') {
+ puts("y");
+ if (getc() == '\r')
+ opts.scrub = 1;
+ else {
+ puts("scrub aborted\n");
+ return -1;
+ }
} else {
puts("scrub aborted\n");
return -1;
diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c
index f8b5d4d..2d37197 100644
--- a/common/cmd_setexpr.c
+++ b/common/cmd_setexpr.c
@@ -28,10 +28,33 @@
#include <config.h>
#include <command.h>
+static ulong get_arg(char *s, int w)
+{
+ ulong *p;
+
+ /*
+ * if the parameter starts with a '*' then assume
+ * it is a pointer to the value we want
+ */
+
+ if (s[0] == '*') {
+ p = (ulong *)simple_strtoul(&s[1], NULL, 16);
+ switch (w) {
+ case 1: return((ulong)(*(uchar *)p));
+ case 2: return((ulong)(*(ushort *)p));
+ case 4:
+ default: return(*p);
+ }
+ } else {
+ return simple_strtoul(s, NULL, 16);
+ }
+}
+
int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
ulong a, b;
char buf[16];
+ int w;
/* Validate arguments */
if ((argc != 5) || (strlen(argv[3]) != 1)) {
@@ -39,8 +62,10 @@ int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 1;
}
- a = simple_strtoul(argv[2], NULL, 16);
- b = simple_strtoul(argv[4], NULL, 16);
+ w = cmd_get_data_size(argv[0], 4);
+
+ a = get_arg(argv[2], w);
+ b = get_arg(argv[4], w);
switch (argv[3][0]) {
case '|': sprintf(buf, "%lx", (a | b)); break;
@@ -64,7 +89,8 @@ int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
setexpr, 5, 0, do_setexpr,
"set environment variable as the result of eval expression",
- "name value1 <op> value2\n"
+ "[.b, .w, .l] name value1 <op> value2\n"
" - set environment variable 'name' to the result of the evaluated\n"
- " express specified by <op>. <op> can be &, |, ^, +, -, *, /, %"
+ " express specified by <op>. <op> can be &, |, ^, +, -, *, /, %\n"
+ " size argument is only meaningful if value1 and/or value2 are memory addresses"
);
diff --git a/common/fdt_support.c b/common/fdt_support.c
index f89a3ee..b7d4fe5 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -757,3 +757,222 @@ int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size)
return -1;
}
#endif
+
+#ifdef CONFIG_FDT_FIXUP_PARTITIONS
+#include <jffs2/load_kernel.h>
+#include <mtd_node.h>
+
+struct reg_cell {
+ unsigned int r0;
+ unsigned int r1;
+};
+
+int fdt_del_subnodes(const void *blob, int parent_offset)
+{
+ int off, ndepth;
+ int ret;
+
+ for (ndepth = 0, off = fdt_next_node(blob, parent_offset, &ndepth);
+ (off >= 0) && (ndepth > 0);
+ off = fdt_next_node(blob, off, &ndepth)) {
+ if (ndepth == 1) {
+ debug("delete %s: offset: %x\n",
+ fdt_get_name(blob, off, 0), off);
+ ret = fdt_del_node((void *)blob, off);
+ if (ret < 0) {
+ printf("Can't delete node: %s\n",
+ fdt_strerror(ret));
+ return ret;
+ } else {
+ ndepth = 0;
+ off = parent_offset;
+ }
+ }
+ }
+ return 0;
+}
+
+int fdt_increase_size(void *fdt, int add_len)
+{
+ int newlen;
+
+ newlen = fdt_totalsize(fdt) + add_len;
+
+ /* Open in place with a new len */
+ return fdt_open_into(fdt, fdt, newlen);
+}
+
+int fdt_del_partitions(void *blob, int parent_offset)
+{
+ const void *prop;
+ int ndepth = 0;
+ int off;
+ int ret;
+
+ off = fdt_next_node(blob, parent_offset, &ndepth);
+ if (off > 0 && ndepth == 1) {
+ prop = fdt_getprop(blob, off, "label", NULL);
+ if (prop == NULL) {
+ /*
+ * Could not find label property, nand {}; node?
+ * Check subnode, delete partitions there if any.
+ */
+ return fdt_del_partitions(blob, off);
+ } else {
+ ret = fdt_del_subnodes(blob, parent_offset);
+ if (ret < 0) {
+ printf("Can't remove subnodes: %s\n",
+ fdt_strerror(ret));
+ return ret;
+ }
+ }
+ }
+ return 0;
+}
+
+int fdt_node_set_part_info(void *blob, int parent_offset,
+ struct mtd_device *dev)
+{
+ struct list_head *pentry;
+ struct part_info *part;
+ struct reg_cell cell;
+ int off, ndepth = 0;
+ int part_num, ret;
+ char buf[64];
+
+ ret = fdt_del_partitions(blob, parent_offset);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Check if it is nand {}; subnode, adjust
+ * the offset in this case
+ */
+ off = fdt_next_node(blob, parent_offset, &ndepth);
+ if (off > 0 && ndepth == 1)
+ parent_offset = off;
+
+ part_num = 0;
+ list_for_each_prev(pentry, &dev->parts) {
+ int newoff;
+
+ part = list_entry(pentry, struct part_info, link);
+
+ debug("%2d: %-20s0x%08x\t0x%08x\t%d\n",
+ part_num, part->name, part->size,
+ part->offset, part->mask_flags);
+
+ sprintf(buf, "partition@%x", part->offset);
+add_sub:
+ ret = fdt_add_subnode(blob, parent_offset, buf);
+ if (ret == -FDT_ERR_NOSPACE) {
+ ret = fdt_increase_size(blob, 512);
+ if (!ret)
+ goto add_sub;
+ else
+ goto err_size;
+ } else if (ret < 0) {
+ printf("Can't add partition node: %s\n",
+ fdt_strerror(ret));
+ return ret;
+ }
+ newoff = ret;
+
+ /* Check MTD_WRITEABLE_CMD flag */
+ if (part->mask_flags & 1) {
+add_ro:
+ ret = fdt_setprop(blob, newoff, "read_only", NULL, 0);
+ if (ret == -FDT_ERR_NOSPACE) {
+ ret = fdt_increase_size(blob, 512);
+ if (!ret)
+ goto add_ro;
+ else
+ goto err_size;
+ } else if (ret < 0)
+ goto err_prop;
+ }
+
+ cell.r0 = cpu_to_fdt32(part->offset);
+ cell.r1 = cpu_to_fdt32(part->size);
+add_reg:
+ ret = fdt_setprop(blob, newoff, "reg", &cell, sizeof(cell));
+ if (ret == -FDT_ERR_NOSPACE) {
+ ret = fdt_increase_size(blob, 512);
+ if (!ret)
+ goto add_reg;
+ else
+ goto err_size;
+ } else if (ret < 0)
+ goto err_prop;
+
+add_label:
+ ret = fdt_setprop_string(blob, newoff, "label", part->name);
+ if (ret == -FDT_ERR_NOSPACE) {
+ ret = fdt_increase_size(blob, 512);
+ if (!ret)
+ goto add_label;
+ else
+ goto err_size;
+ } else if (ret < 0)
+ goto err_prop;
+
+ part_num++;
+ }
+ return 0;
+err_size:
+ printf("Can't increase blob size: %s\n", fdt_strerror(ret));
+ return ret;
+err_prop:
+ printf("Can't add property: %s\n", fdt_strerror(ret));
+ return ret;
+}
+
+/*
+ * Update partitions in nor/nand nodes using info from
+ * mtdparts environment variable. The nodes to update are
+ * specified by node_info structure which contains mtd device
+ * type and compatible string: E. g. the board code in
+ * ft_board_setup() could use:
+ *
+ * struct node_info nodes[] = {
+ * { "fsl,mpc5121-nfc", MTD_DEV_TYPE_NAND, },
+ * { "cfi-flash", MTD_DEV_TYPE_NOR, },
+ * };
+ *
+ * fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+ */
+void fdt_fixup_mtdparts(void *blob, void *node_info, int node_info_size)
+{
+ struct node_info *ni = node_info;
+ struct mtd_device *dev;
+ char *parts;
+ int i, idx;
+ int noff;
+
+ parts = getenv("mtdparts");
+ if (!parts)
+ return;
+
+ if (mtdparts_init() != 0)
+ return;
+
+ for (i = 0; i < node_info_size; i++) {
+ idx = 0;
+ noff = fdt_node_offset_by_compatible(blob, -1, ni[i].compat);
+ while (noff != -FDT_ERR_NOTFOUND) {
+ debug("%s: %s, mtd dev type %d\n",
+ fdt_get_name(blob, noff, 0),
+ ni[i].compat, ni[i].type);
+ dev = device_find(ni[i].type, idx++);
+ if (dev) {
+ if (fdt_node_set_part_info(blob, noff, dev))
+ return; /* return on error */
+ }
+
+ /* Jump to next flash node */
+ noff = fdt_node_offset_by_compatible(blob, noff,
+ ni[i].compat);
+ }
+ }
+}
+#endif
diff --git a/common/main.c b/common/main.c
index c860b0b..3949a5b 100644
--- a/common/main.c
+++ b/common/main.c
@@ -68,7 +68,7 @@ static int abortboot(int);
#undef DEBUG_PARSER
-char console_buffer[CONFIG_SYS_CBSIZE]; /* console I/O buffer */
+char console_buffer[CONFIG_SYS_CBSIZE + 1]; /* console I/O buffer */
static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen);
static char erase_seq[] = "\b \b"; /* erase sequence */
@@ -526,7 +526,7 @@ void reset_cmd_timeout(void)
#define CTL_CH(c) ((c) - 'a' + 1)
-#define MAX_CMDBUF_SIZE 256
+#define MAX_CMDBUF_SIZE CONFIG_SYS_CBSIZE
#define CTL_BACKSPACE ('\b')
#define DEL ((char)255)
@@ -546,7 +546,7 @@ static int hist_cur = -1;
unsigned hist_num = 0;
char* hist_list[HIST_MAX];
-char hist_lines[HIST_MAX][HIST_SIZE];
+char hist_lines[HIST_MAX][HIST_SIZE + 1]; /* Save room for NULL */
#define add_idx_minus_one() ((hist_add_idx == 0) ? hist_max : hist_add_idx-1)
diff --git a/cpu/mcf5227x/cpu_init.c b/cpu/mcf5227x/cpu_init.c
index e160ee1..beb78f5 100644
--- a/cpu/mcf5227x/cpu_init.c
+++ b/cpu/mcf5227x/cpu_init.c
@@ -125,27 +125,27 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
+ switch (port) {
case 0:
gpio->par_uart &=
- (GPIO_PAR_UART_U0TXD_MASK & GPIO_PAR_UART_U0RXD_MASK);
+ (GPIO_PAR_UART_U0TXD_UNMASK & GPIO_PAR_UART_U0RXD_UNMASK);
gpio->par_uart |=
(GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
break;
case 1:
gpio->par_uart &=
- (GPIO_PAR_UART_U1TXD_MASK & GPIO_PAR_UART_U1RXD_MASK);
+ (GPIO_PAR_UART_U1TXD_UNMASK & GPIO_PAR_UART_U1RXD_UNMASK);
gpio->par_uart |=
(GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
break;
case 2:
gpio->par_dspi &=
- (GPIO_PAR_DSPI_SIN_MASK & GPIO_PAR_DSPI_SOUT_MASK);
+ (GPIO_PAR_DSPI_SIN_UNMASK & GPIO_PAR_DSPI_SOUT_UNMASK);
gpio->par_dspi =
(GPIO_PAR_DSPI_SIN_U2RXD | GPIO_PAR_DSPI_SOUT_U2TXD);
break;
@@ -175,11 +175,11 @@ int cfspi_claim_bus(uint bus, uint cs)
switch (cs) {
case 0:
- gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_MASK;
+ gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_UNMASK;
gpio->par_dspi |= GPIO_PAR_DSPI_PCS0_PCS0;
break;
case 2:
- gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK;
+ gpio->par_timer &= GPIO_PAR_TIMER_T2IN_UNMASK;
gpio->par_timer |= GPIO_PAR_TIMER_T2IN_DSPIPCS2;
break;
}
@@ -199,7 +199,7 @@ void cfspi_release_bus(uint bus, uint cs)
gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_PCS0;
break;
case 2:
- gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK;
+ gpio->par_timer &= GPIO_PAR_TIMER_T2IN_UNMASK;
break;
}
}
diff --git a/cpu/mcf5227x/start.S b/cpu/mcf5227x/start.S
index 0c9c89c..30428f1 100644
--- a/cpu/mcf5227x/start.S
+++ b/cpu/mcf5227x/start.S
@@ -24,16 +24,12 @@
#include <config.h>
#include <timestamp.h>
#include "version.h"
+#include <asm/cache.h>
#ifndef CONFIG_IDENT_STRING
#define CONFIG_IDENT_STRING ""
#endif
-/* last three long word reserved for cache status */
-#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4)
-#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8)
-#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12)
-
#define _START _start
#define _FAULT _fault
@@ -378,21 +374,19 @@ _start:
movec %d0, %RAMBAR1
#endif
+ /* invalidate and disable cache */
+ move.l #CF_CACR_CINV, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ move.l #0, %d0
+ movec %d0, %ACR0
+ movec %d0, %ACR1
+
/* initialize general use internal ram */
move.l #0, %d0
move.l #(ICACHE_STATUS), %a1 /* icache */
move.l #(DCACHE_STATUS), %a2 /* icache */
- move.l #(CACR_STATUS), %a3 /* CACR */
move.l %d0, (%a1)
move.l %d0, (%a2)
- move.l %d0, (%a3)
-
- /* invalidate and disable cache */
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #0, %d0
- movec %d0, %ACR0
- movec %d0, %ACR1
/* set stackpointer to end of internal ram to get some stackspace for
the first c-code */
@@ -510,84 +504,6 @@ _int_handler:
RESTORE_ALL
/*------------------------------------------------------------------------------*/
-/* cache functions */
- .globl icache_enable
-icache_enable:
- move.l #0x01200000, %d0 /* Invalid cache */
- movec %d0, %CACR
-
- move.l #(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0
- movec %d0, %ACR0
-
- move.l #0x81600610, %d0 /* Enable cache */
- movec %d0, %CACR
-
- move.l #(ICACHE_STATUS), %a1
- moveq #1, %d0
- move.l %d0, (%a1)
- rts
-
- .globl icache_disable
-icache_disable:
- move.l #0x01F00000, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Invalidate icache */
- clr.l %d0
- movec %d0, %ACR0
- movec %d0, %ACR1
-
- move.l #(ICACHE_STATUS), %a1
- moveq #0, %d0
- move.l %d0, (%a1)
- rts
-
- .globl icache_status
-icache_status:
- move.l #(ICACHE_STATUS), %a1
- move.l (%a1), %d0
- rts
-
- .globl icache_invalid
-icache_invalid:
- move.l #0x80600610, %d0 /* Invalidate icache */
- movec %d0, %CACR /* Enable and invalidate cache */
- rts
-
- .globl dcache_enable
-dcache_enable:
- move.l #0x01200000, %d0 /* Invalid cache */
- movec %d0, %CACR
-
- move.l #0x81300610, %d0
- movec %d0, %CACR
-
- move.l #(DCACHE_STATUS), %a1
- moveq #1, %d0
- move.l %d0, (%a1)
- rts
-
- .globl dcache_disable
-dcache_disable:
- move.l #0x81600610, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Invalidate icache */
-
- move.l #(DCACHE_STATUS), %a1
- moveq #0, %d0
- move.l %d0, (%a1)
- rts
-
- .globl dcache_invalid
-dcache_invalid:
- move.l #0x81100610, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable and invalidate cache */
- rts
-
- .globl dcache_status
-dcache_status:
- move.l #(DCACHE_STATUS), %a1
- move.l (%a1), %d0
- rts
-
-/*------------------------------------------------------------------------------*/
.globl version_string
version_string:
diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c
index 3c04fd4..0f299f0 100644
--- a/cpu/mcf523x/cpu_init.c
+++ b/cpu/mcf523x/cpu_init.c
@@ -130,21 +130,32 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
+ switch (port) {
case 0:
- gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD);
+ gpio->par_uart &= ~(GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD);
+ gpio->par_uart |= (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD);
break;
case 1:
- gpio->par_uart =
- (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD);
+ gpio->par_uart &=
+ ~(GPIO_PAR_UART_U1RXD_MASK | GPIO_PAR_UART_U1TXD_MASK);
+ gpio->par_uart |=
+ (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD);
break;
case 2:
- gpio->par_timer = (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD);
+#ifdef CONFIG_SYS_UART2_PRI_GPIO
+ gpio->par_uart &= ~(GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD);
+ gpio->par_uart |= (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD);
+#elif defined(CONFIG_SYS_UART2_ALT1_GPIO)
+ gpio->feci2c &=
+ ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK);
+ gpio->feci2c |=
+ (GPIO_PAR_FECI2C_EMDC_U2TXD | GPIO_PAR_FECI2C_EMDIO_U2RXD);
+#endif
break;
}
}
@@ -156,7 +167,8 @@ int fecpin_setclear(struct eth_device *dev, int setclear)
if (setclear) {
gpio->par_feci2c |=
- (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO);
+ (GPIO_PAR_FECI2C_EMDC_FECEMDC |
+ GPIO_PAR_FECI2C_EMDIO_FECEMDIO);
} else {
gpio->par_feci2c &=
~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK);
diff --git a/cpu/mcf523x/start.S b/cpu/mcf523x/start.S
index d44da37..20b50e7 100644
--- a/cpu/mcf523x/start.S
+++ b/cpu/mcf523x/start.S
@@ -24,6 +24,7 @@
#include <config.h>
#include <timestamp.h>
#include "version.h"
+#include <asm/cache.h>
#ifndef CONFIG_IDENT_STRING
#define CONFIG_IDENT_STRING ""
@@ -135,7 +136,7 @@ _start:
movec %d0, %RAMBAR1
/* invalidate and disable cache */
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
+ move.l #CF_CACR_CINV, %d0 /* Invalidate cache cmd */
movec %d0, %CACR /* Invalidate cache */
nop
move.l #0, %d0
@@ -144,8 +145,8 @@ _start:
/* initialize general use internal ram */
move.l #0, %d0
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a2
+ move.l #(ICACHE_STATUS), %a1 /* icache */
+ move.l #(DCACHE_STATUS), %a2 /* icache */
move.l %d0, (%a1)
move.l %d0, (%a2)
@@ -265,74 +266,6 @@ _int_handler:
RESTORE_ALL
/*------------------------------------------------------------------------------*/
-/* cache functions */
- .globl icache_enable
-icache_enable:
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- nop
- move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */
- movec %d0, %ACR0 /* Enable cache */
- move.l #(CONFIG_SYS_FLASH_BASE + 0xc000), %d0 /* Setup cache mask */
- movec %d0, %ACR1 /* Enable cache */
-
- move.l #0x80400100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- nop
-
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
- moveq #1, %d0
- move.l %d0, (%a1)
- rts
-
- .globl icache_disable
-icache_disable:
- move.l #0x00000100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Disable cache */
- clr.l %d0 /* Setup cache mask */
- movec %d0, %ACR0
- movec %d0, %ACR1
-
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
- moveq #0, %d0
- move.l %d0, (%a1)
- rts
-
- .globl icache_status
-icache_status:
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
- move.l (%a1), %d0
- rts
-
- .globl icache_invalid
-icache_invalid:
- move.l #0x80600100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- nop
- rts
-
- .globl dcache_enable
-dcache_enable:
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1
- moveq #1, %d0
- move.l %d0, (%a1)
- rts
-
- /* No dcache, just a dummy function */
- .globl dcache_disable
-dcache_disable:
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1
- moveq #0, %d0
- move.l %d0, (%a1)
- rts
-
- .globl dcache_status
-dcache_status:
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1
- move.l (%a1), %d0
- rts
-
-/*------------------------------------------------------------------------------*/
.globl version_string
version_string:
diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c
index 7cea655..170bbfc 100644
--- a/cpu/mcf52x2/cpu_init.c
+++ b/cpu/mcf52x2/cpu_init.c
@@ -5,6 +5,8 @@
* MCF5282 additionals
* (C) Copyright 2005
* BuS Elektronik GmbH & Co. KG <esw@bus-elektronik.de>
+ * (c) Copyright 2010
+ * Arcturus Networks Inc. <www.arcturusnetworks.com>
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
@@ -133,36 +135,36 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
+ switch (port) {
case 0:
- gpio->par_uart &= GPIO_PAR_UART0_MASK;
+ gpio->par_uart &= GPIO_PAR_UART0_UNMASK;
gpio->par_uart |= (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD);
break;
case 1:
- gpio->par_uart &= GPIO_PAR_UART0_MASK;
+ gpio->par_uart &= GPIO_PAR_UART0_UNMASK;
gpio->par_uart |= (GPIO_PAR_UART_U1TXD | GPIO_PAR_UART_U1RXD);
break;
case 2:
#ifdef CONFIG_SYS_UART2_PRI_GPIO
gpio->par_timer &=
- (GPIO_PAR_TMR_TIN0_MASK | GPIO_PAR_TMR_TIN1_MASK);
+ (GPIO_PAR_TMR_TIN0_UNMASK | GPIO_PAR_TMR_TIN1_UNMASK);
gpio->par_timer |=
(GPIO_PAR_TMR_TIN0_U2TXD | GPIO_PAR_TMR_TIN1_U2RXD);
#endif
#ifdef CONFIG_SYS_UART2_ALT1_GPIO
gpio->par_feci2c &=
- (GPIO_PAR_FECI2C_MDC_MASK | GPIO_PAR_FECI2C_MDIO_MASK);
+ (GPIO_PAR_FECI2C_MDC_UNMASK | GPIO_PAR_FECI2C_MDIO_UNMASK);
gpio->par_feci2c |=
(GPIO_PAR_FECI2C_MDC_U2TXD | GPIO_PAR_FECI2C_MDIO_U2RXD);
#endif
#ifdef CONFIG_SYS_UART2_ALT1_GPIO
gpio->par_feci2c &=
- (GPIO_PAR_FECI2C_SDA_MASK | GPIO_PAR_FECI2C_SCL_MASK);
+ (GPIO_PAR_FECI2C_SDA_UNMASK | GPIO_PAR_FECI2C_SCL_UNMASK);
gpio->par_feci2c |=
(GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD);
#endif
@@ -182,8 +184,8 @@ int fecpin_setclear(struct eth_device *dev, int setclear)
GPIO_PAR_FECI2C_MDC_MDC | GPIO_PAR_FECI2C_MDIO_MDIO;
} else {
gpio->par_fec &=
- (GPIO_PAR_FEC_7W_MASK & GPIO_PAR_FEC_MII_MASK);
- gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII_MASK;
+ (GPIO_PAR_FEC_7W_UNMASK & GPIO_PAR_FEC_MII_UNMASK);
+ gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII_UNMASK;
}
return 0;
}
@@ -245,15 +247,19 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
+ volatile u32 *par = (u32 *) MMAP_PAR;
+
/* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
- case 0:
- break;
+ switch (port) {
case 1:
+ *par &= 0xFFE7FFFF;
+ *par |= 0x00180000;
break;
case 2:
+ *par &= 0xFFFFFFFC;
+ *par &= 0x00000003;
break;
}
}
@@ -289,21 +295,26 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
+ u16 temp;
+
/* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
+ switch (port) {
case 0:
- mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD |
- MCF_GPIO_PAR_UART_U0RXD);
+ temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xFFF3;
+ temp |= (MCF_GPIO_PAR_UART_U0TXD | MCF_GPIO_PAR_UART_U0RXD);
+ mbar_writeShort(MCF_GPIO_PAR_UART, temp);
break;
case 1:
- mbar_writeShort(MCF_GPIO_PAR_UART,
- MCF_GPIO_PAR_UART_U1RXD_UART1 |
- MCF_GPIO_PAR_UART_U1TXD_UART1);
+ temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xF0FF;
+ temp |= (MCF_GPIO_PAR_UART_U1RXD_UART1 | MCF_GPIO_PAR_UART_U1TXD_UART1);
+ mbar_writeShort(MCF_GPIO_PAR_UART, temp);
break;
case 2:
- mbar_writeShort(MCF_GPIO_PAR_UART, 0x3000);
+ temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xCFFF;
+ temp |= (0x3000);
+ mbar_writeShort(MCF_GPIO_PAR_UART, temp);
break;
}
}
@@ -407,12 +418,12 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
+ switch (port) {
case 0:
gpio->gpio_pbcnt &= ~(GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK);
gpio->gpio_pbcnt |= (GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD);
@@ -485,19 +496,22 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
+ switch (port) {
case 0:
+ gpio->par_uart &= ~UART0_ENABLE_MASK;
gpio->par_uart |= UART0_ENABLE_MASK;
break;
case 1:
+ gpio->par_uart &= ~UART1_ENABLE_MASK;
gpio->par_uart |= UART1_ENABLE_MASK;
break;
case 2:
+ gpio->par_uart &= ~UART2_ENABLE_MASK;
gpio->par_uart |= UART2_ENABLE_MASK;
break;
}
@@ -582,6 +596,12 @@ void cpu_init_f(void)
#ifdef CONFIG_SYS_PTCPAR
MCFGPIO_PTCPAR = CONFIG_SYS_PTCPAR;
#endif
+#if defined(CONFIG_SYS_PORTTC)
+ MCFGPIO_PORTTC = CONFIG_SYS_PORTTC;
+#endif
+#if defined(CONFIG_SYS_DDRTC)
+ MCFGPIO_DDRTC = CONFIG_SYS_DDRTC;
+#endif
#ifdef CONFIG_SYS_PTDPAR
MCFGPIO_PTDPAR = CONFIG_SYS_PTDPAR;
#endif
@@ -589,6 +609,9 @@ void cpu_init_f(void)
MCFGPIO_PUAPAR = CONFIG_SYS_PUAPAR;
#endif
+#if defined(CONFIG_SYS_DDRD)
+ MCFGPIO_DDRD = CONFIG_SYS_DDRD;
+#endif
#ifdef CONFIG_SYS_DDRUA
MCFGPIO_DDRUA = CONFIG_SYS_DDRUA;
#endif
@@ -610,10 +633,10 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
/* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
+ switch (port) {
case 0:
MCFGPIO_PUAPAR &= 0xFc;
MCFGPIO_PUAPAR |= 0x03;
@@ -718,14 +741,7 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
- /* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
- case 0:
- break;
- case 1:
- break;
- }
}
#endif /* #if defined(CONFIG_M5249) */
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index 0dd4de5..9ef206a 100644
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -24,12 +24,12 @@
#include <config.h>
#include <timestamp.h>
#include "version.h"
+#include <asm/cache.h>
#ifndef CONFIG_IDENT_STRING
#define CONFIG_IDENT_STRING ""
#endif
-
#define _START _start
#define _FAULT _fault
@@ -201,6 +201,13 @@ _after_flashbar_copy:
movec %d0, %RAMBAR1
#endif
+ /* initialize general use internal ram */
+ move.l #0, %d0
+ move.l #(ICACHE_STATUS), %a1 /* icache */
+ move.l #(DCACHE_STATUS), %a2 /* icache */
+ move.l %d0, (%a1)
+ move.l %d0, (%a2)
+
/* set stackpointer to end of internal ram to get some stackspace for the first c-code */
move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
clr.l %sp@-
@@ -283,23 +290,6 @@ clear_bss:
cmp.l %a2, %a1
bne 7b
-#if defined(CONFIG_M5281) || defined(CONFIG_M5282)
- /* patch the 3 accesspoints to 3 ichache_state */
- /* quick and dirty */
-
- move.l %a0,%d1
- add.l #(icache_state - CONFIG_SYS_MONITOR_BASE),%d1
- move.l %a0,%a1
- add.l #(icache_state_access_1+2 - CONFIG_SYS_MONITOR_BASE),%a1
- move.l %d1,(%a1)
- move.l %a0,%a1
- add.l #(icache_state_access_2+2 - CONFIG_SYS_MONITOR_BASE),%a1
- move.l %d1,(%a1)
- move.l %a0,%a1
- add.l #(icache_state_access_3+2 - CONFIG_SYS_MONITOR_BASE),%a1
- move.l %d1,(%a1)
-#endif
-
/* calculate relative jump to board_init_r in ram */
move.l %a0, %a1
add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
@@ -336,156 +326,6 @@ _int_handler:
RESTORE_ALL
/*------------------------------------------------------------------------------*/
-/* cache functions */
-#ifdef CONFIG_M5208
- .globl icache_enable
-icache_enable:
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #(CONFIG_SYS_SDRAM_BASE + 0xC000), %d0 /* Setup cache mask */
- movec %d0, %ACR0 /* Enable cache */
-
- move.l #0x80000200, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- nop
-
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
- moveq #1, %d0
- move.l %d0, (%a1)
- rts
-#endif
-
-#ifdef CONFIG_M5271
- .globl icache_enable
-icache_enable:
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */
- movec %d0, %ACR0 /* Enable cache */
-
- move.l #0x80000200, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- nop
-
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
- moveq #1, %d0
- move.l %d0, (%a1)
- rts
-#endif
-
-#ifdef CONFIG_M5272
- .globl icache_enable
-icache_enable:
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #0x0000c000, %d0 /* Setup cache mask */
- movec %d0, %ACR0 /* Enable cache */
- move.l #0xff00c000, %d0 /* Setup cache mask */
- movec %d0, %ACR1 /* Enable cache */
- move.l #0x80000100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- moveq #1, %d0
- move.l %d0, icache_state
- rts
-#endif
-
-#if defined(CONFIG_M5275)
-/*
- * Instruction cache only
- */
- .globl icache_enable
-icache_enable:
- move.l #0x01400000, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #0x0000c000, %d0 /* Setup SDRAM caching */
- movec %d0, %ACR0 /* Enable cache */
- move.l #0x00000000, %d0 /* No other caching */
- movec %d0, %ACR1 /* Enable cache */
- move.l #0x80400100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- moveq #1, %d0
- move.l %d0, icache_state
- rts
-#endif
-
-#ifdef CONFIG_M5282
- .globl icache_enable
-icache_enable:
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #0x0000c000, %d0 /* Setup cache mask */
- movec %d0, %ACR0 /* Enable cache */
- move.l #0xff00c000, %d0 /* Setup cache mask */
- movec %d0, %ACR1 /* Enable cache */
- move.l #0x80400100, %d0 /* Setup cache mask, data cache disabel*/
- movec %d0, %CACR /* Enable cache */
- moveq #1, %d0
-icache_state_access_1:
- move.l %d0, icache_state
- rts
-#endif
-
-#if defined(CONFIG_M5249) || defined(CONFIG_M5253)
- .globl icache_enable
-icache_enable:
- /*
- * Note: The 5249 Documentation doesn't give a bit position for CINV!
- * From the 5272 and the 5307 documentation, I have deduced that it is
- * probably CACR[24]. Should someone say something to Motorola?
- * ~Jeremy
- */
- move.l #0x01000000, %d0 /* Invalidate whole cache */
- move.c %d0,%CACR
- move.l #0xff00c000, %d0 /* Set FLASH cachable: always match (SM=0b10) */
- move.c %d0, %ACR0
- move.l #0x0000c000, %d0 /* Set SDRAM cachable: always match (SM=0b10) */
- move.c %d0, %ACR1
- move.l #0x90000200, %d0 /* Set cache enable cmd */
- move.c %d0,%CACR
- moveq #1, %d0
- move.l %d0, icache_state
- rts
-#endif
-
- .globl icache_disable
-icache_disable:
- move.l #0x00000100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- clr.l %d0 /* Setup cache mask */
- movec %d0, %ACR0 /* Enable cache */
- movec %d0, %ACR1 /* Enable cache */
- moveq #0, %d0
-icache_state_access_2:
- move.l %d0, icache_state
- rts
-
- .globl icache_status
-icache_status:
-icache_state_access_3:
- move.l #(icache_state), %a0
- move.l (%a0), %d0
- rts
-
- .data
-icache_state:
- .long 0 /* cache is diabled on inirialization */
-
- .globl dcache_enable
-dcache_enable:
- /* dummy function */
- rts
-
- .globl dcache_disable
-dcache_disable:
- /* dummy function */
- rts
-
- .globl dcache_status
-dcache_status:
- /* dummy function */
- rts
-
-/*------------------------------------------------------------------------------*/
.globl version_string
version_string:
diff --git a/cpu/mcf532x/config.mk b/cpu/mcf532x/config.mk
index 0cb90ac..b783444 100644
--- a/cpu/mcf532x/config.mk
+++ b/cpu/mcf532x/config.mk
@@ -24,8 +24,20 @@
#
PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+
+cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is5301x:=$(shell grep CONFIG_MCF5301x $(TOPDIR)/include/$(cfg))
+is532x:=$(shell grep CONFIG_MCF532x $(TOPDIR)/include/$(cfg))
+
ifneq ($(findstring 4.1,$(shell $(CC) --version)),4.1)
+
+ifneq (,$(findstring CONFIG_MCF5301x,$(is5301x)))
+PLATFORM_CPPFLAGS += -mcpu=53015 -fPIC
+endif
+ifneq (,$(findstring CONFIG_MCF532x,$(is532x)))
PLATFORM_CPPFLAGS += -mcpu=5329 -fPIC
+endif
+
else
PLATFORM_CPPFLAGS += -m5307 -fPIC
endif
diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c
index 4f1695c..6f551b6 100644
--- a/cpu/mcf532x/cpu_init.c
+++ b/cpu/mcf532x/cpu_init.c
@@ -133,24 +133,26 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
+ switch (port) {
case 0:
- gpio->par_uart = (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD);
+ gpio->par_uart &= ~(GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD);
+ gpio->par_uart |= (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD);
break;
case 1:
#ifdef CONFIG_SYS_UART1_ALT1_GPIO
gpio->par_simp1h &=
- ~(GPIO_PAR_SIMP1H_DATA1_MASK | GPIO_PAR_SIMP1H_VEN1_MASK);
+ ~(GPIO_PAR_SIMP1H_DATA1_UNMASK |
+ GPIO_PAR_SIMP1H_VEN1_UNMASK);
gpio->par_simp1h |=
(GPIO_PAR_SIMP1H_DATA1_U1TXD | GPIO_PAR_SIMP1H_VEN1_U1RXD);
#elif defined(CONFIG_SYS_UART1_ALT2_GPIO)
gpio->par_ssih &=
- ~(GPIO_PAR_SSIH_RXD_MASK | GPIO_PAR_SSIH_TXD_MASK);
+ ~(GPIO_PAR_SSIH_RXD_UNMASK | GPIO_PAR_SSIH_TXD_UNMASK);
gpio->par_ssih |=
(GPIO_PAR_SSIH_RXD_U1RXD | GPIO_PAR_SSIH_TXD_U1TXD);
#endif
@@ -160,12 +162,12 @@ void uart_port_conf(void)
gpio->par_uart |= (GPIO_PAR_UART_U2TXD | GPIO_PAR_UART_U2RXD);
#elif defined(CONFIG_SYS_UART2_ALT1_GPIO)
gpio->par_dspih &=
- ~(GPIO_PAR_DSPIH_SIN_MASK | GPIO_PAR_DSPIH_SOUT_MASK);
+ ~(GPIO_PAR_DSPIH_SIN_UNMASK | GPIO_PAR_DSPIH_SOUT_UNMASK);
gpio->par_dspih |=
(GPIO_PAR_DSPIH_SIN_U2RXD | GPIO_PAR_DSPIH_SOUT_U2TXD);
#elif defined(CONFIG_SYS_UART2_ALT2_GPIO)
gpio->par_feci2c &=
- ~(GPIO_PAR_FECI2C_SDA_MASK | GPIO_PAR_FECI2C_SCL_MASK);
+ ~(GPIO_PAR_FECI2C_SDA_UNMASK | GPIO_PAR_FECI2C_SCL_UNMASK);
gpio->par_feci2c |=
(GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD);
#endif
@@ -195,11 +197,11 @@ int fecpin_setclear(struct eth_device *dev, int setclear)
if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
gpio->par_fec &=
~(GPIO_PAR_FEC0_7W_FEC | GPIO_PAR_FEC0_RMII_FEC);
- gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII0_MASK;
+ gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII0_UNMASK;
} else {
gpio->par_fec &=
~(GPIO_PAR_FEC1_7W_FEC | GPIO_PAR_FEC1_RMII_FEC);
- gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII1_MASK;
+ gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII1_UNMASK;
}
}
return 0;
@@ -297,22 +299,33 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
+ switch (port) {
case 0:
- gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
+ gpio->par_uart &= ~(GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
+ gpio->par_uart |= (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
break;
case 1:
- gpio->par_uart =
+ gpio->par_uart &=
+ ~(GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3));
+ gpio->par_uart |=
(GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3));
break;
case 2:
+#ifdef CONFIG_SYS_UART2_ALT1_GPIO
gpio->par_timer &= 0x0F;
gpio->par_timer |= (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2);
+#elif defined(CONFIG_SYS_UART2_ALT2_GPIO)
+ gpio->par_feci2c &= 0xFF00;
+ gpio->par_feci2c |= (GPIO_PAR_FECI2C_SCL_UTXD2 | GPIO_PAR_FECI2C_SDA_URXD2);
+#elif defined(CONFIG_SYS_UART2_ALT3_GPIO)
+ gpio->par_ssi &= 0xF0FF;
+ gpio->par_ssi |= (GPIO_PAR_SSI_RXD(2) | GPIO_PAR_SSI_TXD(2));
+#endif
break;
}
}
diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c
index 67f08c7..5a29e25 100644
--- a/cpu/mcf532x/speed.c
+++ b/cpu/mcf532x/speed.c
@@ -229,7 +229,7 @@ int clock_pll(int fsys, int flags)
PLL_PDR_OUTDIV3((BUSDIV / 2) - 1) |
PLL_PDR_OUTDIV4(USBDIV - 1);
- pll->pcr &= PLL_PCR_FBDIV_MASK;
+ pll->pcr &= PLL_PCR_FBDIV_UNMASK;
pll->pcr |= PLL_PCR_FBDIV(mfd - 1);
#endif
#ifdef CONFIG_MCF532x
diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S
index 5b134aa..a80b0a9 100644
--- a/cpu/mcf532x/start.S
+++ b/cpu/mcf532x/start.S
@@ -27,6 +27,7 @@
#include <config.h>
#include <timestamp.h>
#include "version.h"
+#include <asm/cache.h>
#ifndef CONFIG_IDENT_STRING
#define CONFIG_IDENT_STRING ""
@@ -142,7 +143,7 @@ _start:
movec %d0, %RAMBAR1
/* invalidate and disable cache */
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
+ move.l #CF_CACR_CINVA, %d0 /* Invalidate cache cmd */
movec %d0, %CACR /* Invalidate cache */
move.l #0, %d0
movec %d0, %ACR0
@@ -158,8 +159,8 @@ _start:
/* initialize general use internal ram */
move.l #0, %d0
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a2
+ move.l #(ICACHE_STATUS), %a1 /* icache */
+ move.l #(DCACHE_STATUS), %a2 /* icache */
move.l %d0, (%a1)
move.l %d0, (%a2)
@@ -279,71 +280,6 @@ _int_handler:
RESTORE_ALL
/*------------------------------------------------------------------------------*/
-/* cache functions */
- .globl icache_enable
-icache_enable:
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000 + ((CONFIG_SYS_SDRAM_SIZE & 0x1fe0) << 11)), %d0
- movec %d0, %ACR0 /* Enable cache */
-
- move.l #0x80000200, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- nop
-
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
- moveq #1, %d0
- move.l %d0, (%a1)
- rts
-
- .globl icache_disable
-icache_disable:
- move.l #0x01000000, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Disable cache */
- clr.l %d0 /* Setup cache mask */
- movec %d0, %ACR0
- movec %d0, %ACR1
-
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
- moveq #0, %d0
- move.l %d0, (%a1)
- rts
-
- .globl icache_status
-icache_status:
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
- move.l (%a1), %d0
- rts
-
- .globl icache_invalid
-icache_invalid:
- move.l #0x81000200, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- rts
-
- .globl dcache_enable
-dcache_enable:
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1
- moveq #1, %d0
- move.l %d0, (%a1)
- rts
-
- /* No dcache, just a dummy function */
- .globl dcache_disable
-dcache_disable:
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1
- moveq #0, %d0
- move.l %d0, (%a1)
- rts
-
- .globl dcache_status
-dcache_status:
- move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1
- move.l (%a1), %d0
- rts
-
-/*------------------------------------------------------------------------------*/
-
.globl version_string
version_string:
.ascii U_BOOT_VERSION
diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c
index 48b37df..8d51d35 100644
--- a/cpu/mcf5445x/cpu_init.c
+++ b/cpu/mcf5445x/cpu_init.c
@@ -28,6 +28,7 @@
#include <common.h>
#include <watchdog.h>
#include <asm/immap.h>
+#include <asm/processor.h>
#include <asm/rtc.h>
#if defined(CONFIG_CMD_NET)
@@ -105,6 +106,14 @@ void cpu_init_f(void)
fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
#endif
+ /*
+ * now the flash base address is no longer at 0 (Newer ColdFire family
+ * boot at address 0 instead of 0xFFnn_nnnn). The vector table must
+ * also move to the new location.
+ */
+ if (CONFIG_SYS_CS0_BASE != 0)
+ setvbr(CONFIG_SYS_CS0_BASE);
+
#ifdef CONFIG_FSL_I2C
gpio->par_feci2c = GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA;
#endif
@@ -128,19 +137,43 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
+ switch (port) {
case 0:
- gpio->par_uart =
+ gpio->par_uart &=
+ ~(GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
+ gpio->par_uart |=
(GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
break;
case 1:
- gpio->par_uart =
+#ifdef CONFIG_SYS_UART1_PRI_GPIO
+ gpio->par_uart &=
+ ~(GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
+ gpio->par_uart |=
(GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
+#elif defined(CONFIG_SYS_UART1_ALT1_GPIO)
+ gpio->par_ssi &=
+ (GPIO_PAR_SSI_SRXD_UNMASK | GPIO_PAR_SSI_STXD_UNMASK);
+ gpio->par_ssi |=
+ (GPIO_PAR_SSI_SRXD_U1RXD | GPIO_PAR_SSI_STXD_U1TXD);
+#endif
+ break;
+ case 2:
+#if defined(CONFIG_SYS_UART2_ALT1_GPIO)
+ gpio->par_timer &=
+ (GPIO_PAR_TIMER_T3IN_UNMASK | GPIO_PAR_TIMER_T2IN_UNMASK);
+ gpio->par_timer |=
+ (GPIO_PAR_TIMER_T3IN_U2RXD | GPIO_PAR_TIMER_T2IN_U2TXD);
+#elif defined(CONFIG_SYS_UART2_ALT2_GPIO)
+ gpio->par_timer &=
+ (GPIO_PAR_FECI2C_SCL_UNMASK | GPIO_PAR_FECI2C_SDA_UNMASK);
+ gpio->par_timer |=
+ (GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD);
+#endif
break;
}
}
@@ -164,9 +197,9 @@ int fecpin_setclear(struct eth_device *dev, int setclear)
~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
- gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
+ gpio->par_fec &= GPIO_PAR_FEC_FEC0_UNMASK;
else
- gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
+ gpio->par_fec &= GPIO_PAR_FEC_FEC1_UNMASK;
}
return 0;
}
diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S
index d2d4439..738e4a7 100644
--- a/cpu/mcf5445x/start.S
+++ b/cpu/mcf5445x/start.S
@@ -24,16 +24,12 @@
#include <config.h>
#include <timestamp.h>
#include "version.h"
+#include <asm/cache.h>
#ifndef CONFIG_IDENT_STRING
#define CONFIG_IDENT_STRING ""
#endif
-/* last three long word reserved for cache status */
-#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12)
-#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8)
-#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4)
-
#define _START _start
#define _FAULT _fault
@@ -160,15 +156,13 @@ asm_dram_init:
/* initialize general use internal ram */
move.l #0, %d0
- move.l #(CACR_STATUS), %a1 /* CACR */
- move.l #(ICACHE_STATUS), %a2 /* icache */
- move.l #(DCACHE_STATUS), %a3 /* dcache */
+ move.l #(ICACHE_STATUS), %a1 /* icache */
+ move.l #(DCACHE_STATUS), %a2 /* dcache */
move.l %d0, (%a1)
move.l %d0, (%a2)
- move.l %d0, (%a3)
/* invalidate and disable cache */
- move.l #0x01004100, %d0 /* Invalidate cache cmd */
+ move.l #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0
movec %d0, %CACR /* Invalidate cache */
move.l #0, %d0
movec %d0, %ACR0
@@ -411,15 +405,13 @@ _start:
/* initialize general use internal ram */
move.l #0, %d0
- move.l #(CACR_STATUS), %a1 /* CACR */
- move.l #(ICACHE_STATUS), %a2 /* icache */
- move.l #(DCACHE_STATUS), %a3 /* dcache */
+ move.l #(ICACHE_STATUS), %a1 /* icache */
+ move.l #(DCACHE_STATUS), %a2 /* dcache */
move.l %d0, (%a1)
move.l %d0, (%a2)
- move.l %d0, (%a3)
/* invalidate and disable cache */
- move.l #0x01004100, %d0 /* Invalidate cache cmd */
+ move.l #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0
movec %d0, %CACR /* Invalidate cache */
move.l #0, %d0
movec %d0, %ACR0
@@ -544,107 +536,6 @@ _int_handler:
RESTORE_ALL
/*------------------------------------------------------------------------------*/
-/* cache functions */
- .globl icache_enable
-icache_enable:
- move.l #(CACR_STATUS), %a1 /* read CACR Status */
- move.l (%a1), %d1
-
- move.l #0x00040100, %d0 /* Invalidate icache */
- movec %d0, %CACR
-
- move.l #(CONFIG_SYS_SDRAM_BASE + 0xC000), %d0 /* Setup icache */
- movec %d0, %ACR2
-
- move.l #0x04088020, %d0 /* Enable bcache and icache */
- movec %d0, %CACR
-
- move.l #(ICACHE_STATUS), %a1
- moveq #1, %d0
- move.l %d0, (%a1)
- rts
-
- .globl icache_disable
-icache_disable:
- move.l #(CACR_STATUS), %a1 /* read CACR Status */
- move.l (%a1), %d0
-
- move.l #0xFFF77BFF, %d0
- or.l #0x00040100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Invalidate icache */
- clr.l %d0
- movec %d0, %ACR2
- movec %d0, %ACR3
-
- move.l #(ICACHE_STATUS), %a1
- moveq #0, %d0
- move.l %d0, (%a1)
- rts
-
- .globl icache_status
-icache_status:
- move.l #(ICACHE_STATUS), %a1
- move.l (%a1), %d0
- rts
-
- .globl icache_invalid
-icache_invalid:
- move.l #(CACR_STATUS), %a1 /* read CACR Status */
- move.l (%a1), %d0
-
- move.l #0x00040100, %d0 /* Invalidate icache */
- movec %d0, %CACR /* Enable and invalidate cache */
- rts
-
- .globl dcache_enable
-dcache_enable:
- move.l #(CACR_STATUS), %a1 /* read CACR Status */
- move.l (%a1), %d1
-
- move.l #0x01040100, %d0
- movec %d0, %CACR /* Invalidate dcache */
-
- move.l #0x80088020, %d0 /* Enable bcache and icache */
- movec %d0, %CACR
-
- move.l #(DCACHE_STATUS), %a1
- moveq #1, %d0
- move.l %d0, (%a1)
- rts
-
- .globl dcache_disable
-dcache_disable:
- move.l #(CACR_STATUS), %a1 /* read CACR Status */
- move.l (%a1), %d0
-
- and.l #0x7FFFFFFF, %d0
- or.l #0x01000000, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Disable dcache */
- clr.l %d0
- movec %d0, %ACR0
- movec %d0, %ACR1
-
- move.l #(DCACHE_STATUS), %a1
- moveq #0, %d0
- move.l %d0, (%a1)
- rts
-
- .globl dcache_invalid
-dcache_invalid:
- move.l #(CACR_STATUS), %a1 /* read CACR Status */
- move.l (%a1), %d0
-
- move.l #0x81088020, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable and invalidate cache */
- rts
-
- .globl dcache_status
-dcache_status:
- move.l #(DCACHE_STATUS), %a1
- move.l (%a1), %d0
- rts
-
-/*------------------------------------------------------------------------------*/
.globl version_string
version_string:
diff --git a/cpu/mcf547x_8x/cpu_init.c b/cpu/mcf547x_8x/cpu_init.c
index 96a3132..60c9126 100644
--- a/cpu/mcf547x_8x/cpu_init.c
+++ b/cpu/mcf547x_8x/cpu_init.c
@@ -113,13 +113,13 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
volatile u8 *pscsicr = (u8 *) (CONFIG_SYS_UART_BASE + 0x40);
/* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
+ switch (port) {
case 0:
gpio->par_psc0 = (GPIO_PAR_PSC0_TXD0 | GPIO_PAR_PSC0_RXD0);
break;
diff --git a/cpu/mcf547x_8x/start.S b/cpu/mcf547x_8x/start.S
index 94ef14b..8411862 100644
--- a/cpu/mcf547x_8x/start.S
+++ b/cpu/mcf547x_8x/start.S
@@ -24,16 +24,12 @@
#include <config.h>
#include <timestamp.h>
#include "version.h"
+#include <asm/cache.h>
#ifndef CONFIG_IDENT_STRING
#define CONFIG_IDENT_STRING ""
#endif
-/* last three long word reserved for cache status */
-#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4)
-#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8)
-#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12)
-
#define _START _start
#define _FAULT _fault
@@ -158,10 +154,8 @@ _start:
move.l #0, %d0
move.l #(ICACHE_STATUS), %a1 /* icache */
move.l #(DCACHE_STATUS), %a2 /* icache */
- move.l #(CACR_STATUS), %a3 /* CACR */
move.l %d0, (%a1)
move.l %d0, (%a2)
- move.l %d0, (%a3)
/* set stackpointer to end of internal ram to get some stackspace for the
first c-code */
@@ -279,81 +273,6 @@ _int_handler:
RESTORE_ALL
/*------------------------------------------------------------------------------*/
-/* cache functions */
- .globl icache_enable
-icache_enable:
- move.l #(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0
- movec %d0, %ACR2 /* Enable cache */
-
- move.l #0x020C8100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- nop
-
- move.l #(ICACHE_STATUS), %a1
- moveq #1, %d0
- move.l %d0, (%a1)
- rts
-
- .globl icache_disable
-icache_disable:
- move.l #0x000C8100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Disable cache */
- clr.l %d0 /* Setup cache mask */
- movec %d0, %ACR2
- movec %d0, %ACR3
-
- move.l #(ICACHE_STATUS), %a1
- moveq #0, %d0
- move.l %d0, (%a1)
- rts
-
- .globl icache_invalid
-icache_invalid:
- move.l #0x000C8100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- rts
-
- .globl icache_status
-icache_status:
- move.l #(ICACHE_STATUS), %a1
- move.l (%a1), %d0
- rts
-
- .globl dcache_enable
-dcache_enable:
- bsr icache_disable
-
- move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0
- movec %d0, %ACR0 /* Enable cache */
-
- move.l #0xA30C8100, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
-
- move.l #(DCACHE_STATUS), %a1
- moveq #1, %d0
- move.l %d0, (%a1)
- rts
-
- .globl dcache_disable
-dcache_disable:
- move.l #0xA30C8100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Disable cache */
- clr.l %d0 /* Setup cache mask */
- movec %d0, %ACR0
- movec %d0, %ACR1
-
- move.l #(DCACHE_STATUS), %a1
- moveq #0, %d0
- move.l %d0, (%a1)
- rts
-
- .globl dcache_status
-dcache_status:
- move.l #(DCACHE_STATUS), %a1
- move.l (%a1), %d0
- rts
-
-/*------------------------------------------------------------------------------*/
.globl version_string
version_string:
diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile
index 06fdbcf..0ee0611 100644
--- a/cpu/mpc5xxx/Makefile
+++ b/cpu/mpc5xxx/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
START = start.o
-SOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o
+SOBJS = io.o firmware_sc_task_bestcomm.impl.o
COBJS = i2c.o traps.o cpu.o cpu_init.o ide.o interrupts.o \
loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index edfb828..b20234d 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -50,16 +50,10 @@ int checkcpu (void)
{
ulong clock = gd->cpu_clk;
char buf[32];
-#ifndef CONFIG_MGT5100
uint svr, pvr;
-#endif
puts ("CPU: ");
-#ifdef CONFIG_MGT5100
- puts (CPU_ID_STR);
- printf (" (JTAG ID %08lx)", *(vu_long *)MPC5XXX_CDM_JTAGID);
-#else
svr = get_svr();
pvr = get_pvr();
@@ -77,7 +71,6 @@ int checkcpu (void)
printf (" v%d.%d, Core v%d.%d", SVR_MJREV (svr), SVR_MNREV (svr),
PVR_MAJ(pvr), PVR_MIN(pvr));
-#endif
printf (" at %s MHz\n", strmhz (buf, clock));
return 0;
}
diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
index 560c9b3..9daf375 100644
--- a/cpu/mpc5xxx/cpu_init.c
+++ b/cpu/mpc5xxx/cpu_init.c
@@ -53,10 +53,6 @@ void cpu_init_f (void)
(struct mpc5xxx_gpt *) MPC5XXX_GPT;
#endif /* CONFIG_WATCHDOG */
unsigned long addecr = (1 << 25); /* Boot_CS */
-
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_MGT5100)
- addecr |= (1 << 22); /* SDRAM enable */
-#endif
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
@@ -136,7 +132,6 @@ void cpu_init_f (void)
out_be32(&lpb->cs5_cfg, CONFIG_SYS_CS5_CFG);
#endif
-#if defined(CONFIG_MPC5200)
addecr |= 1;
#if defined(CONFIG_SYS_CS6_START) && defined(CONFIG_SYS_CS6_SIZE)
out_be32(&mm->cs6_start, START_REG(CONFIG_SYS_CS6_START));
@@ -164,14 +159,9 @@ void cpu_init_f (void)
#if defined(CONFIG_SYS_CS_DEADCYCLE)
out_be32(&lpb->cs_deadcycle, CONFIG_SYS_CS_DEADCYCLE);
#endif
-#endif /* CONFIG_MPC5200 */
/* Enable chip selects */
-#if defined(CONFIG_MGT5100)
- out_be32(&mm->addecr, addecr);
-#elif defined(CONFIG_MPC5200)
out_be32(&mm->ipbi_ws_ctrl, addecr);
-#endif
out_be32(&lpb->cs_ctrl, (1 << 24));
/* Setup pin multiplexing */
@@ -179,7 +169,6 @@ void cpu_init_f (void)
out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG);
#endif
-#if defined(CONFIG_MPC5200)
/* enable timebase */
setbits_be32(&xlb->config, (1 << 13));
@@ -187,33 +176,29 @@ void cpu_init_f (void)
setbits_be32(&xlb->config, (1 << 15));
out_be32(&xlb->snoop_window, CONFIG_SYS_SDRAM_BASE | 0x1d);
-# if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
+#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
/* Motorola reports IPB should better run at 133 MHz. */
-# if defined(CONFIG_MGT5100)
- setbits_be32(&mm->addecr, 1);
-# elif defined(CONFIG_MPC5200)
setbits_be32(&mm->ipbi_ws_ctrl, 1);
-# endif
/* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */
addecr = in_be32(&cdm->cfg);
addecr &= ~0x103;
-# if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2)
+# if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2)
/* pci_clk_sel = 0x01 -> IPB_CLK/2 */
addecr |= 0x01;
-# else
+# else
/* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */
addecr |= 0x02;
-# endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */
+# endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */
out_be32(&cdm->cfg, addecr);
-# endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
+#endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
/* Configure the XLB Arbiter */
out_be32(&xlb->master_pri_enable, 0xff);
out_be32(&xlb->master_priority, 0x11111111);
-# if defined(CONFIG_SYS_XLB_PIPELINING)
+#if defined(CONFIG_SYS_XLB_PIPELINING)
/* Enable piplining */
clrbits_be32(&xlb->config, (1 << 31));
-# endif
+#endif
#if defined(CONFIG_WATCHDOG)
/* Charge the watchdog timer - prescaler = 64k, count = 64k*/
@@ -222,8 +207,6 @@ void cpu_init_f (void)
reset_5xxx_watchdog();
#endif /* CONFIG_WATCHDOG */
-
-#endif /* CONFIG_MPC5200 */
}
/*
@@ -235,11 +218,7 @@ int cpu_init_r (void)
(struct mpc5xxx_intr *) MPC5XXX_ICTL;
/* mask all interrupts */
-#if defined(CONFIG_MGT5100)
- out_be32(&intr->per_mask, 0xfffffc00);
-#elif defined(CONFIG_MPC5200)
out_be32(&intr->per_mask, 0xffffff00);
-#endif
setbits_be32(&intr->main_mask, 0x0001ffff);
clrbits_be32(&intr->ctrl, 0x00000f00);
/* route critical ints to normal ints */
diff --git a/cpu/mpc5xxx/firmware_sc_task.impl.S b/cpu/mpc5xxx/firmware_sc_task.impl.S
deleted file mode 100644
index b668ee5..0000000
--- a/cpu/mpc5xxx/firmware_sc_task.impl.S
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * Copyright (C) 2001, Software Center, Motorola China.
- *
- * This file contains microcode for the FEC controller of the MGT5100 CPU.
- */
-
-#include <config.h>
-
-#if defined(CONFIG_MGT5100)
-
-/* sas/sccg, gas target */
-.section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */
-.section smartdmaTaskTable,"aw",@progbits /* Task tables */
-.globl taskTable
-taskTable:
-.globl scEthernetRecv_Entry
-scEthernetRecv_Entry: /* Task 0 */
-.long scEthernetRecv_TDT - taskTable /* Task 0 Descriptor Table */
-.long scEthernetRecv_TDT - taskTable + 0x000000a4
-.long scEthernetRecv_VarTab - taskTable /* Task 0 Variable Table */
-.long scEthernetRecv_FDT - taskTable + 0x03 /* Task 0 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetRecv_CSave - taskTable /* Task 0 context save space */
-.long 0xf0000000
-.globl scEthernetXmit_Entry
-scEthernetXmit_Entry: /* Task 1 */
-.long scEthernetXmit_TDT - taskTable /* Task 1 Descriptor Table */
-.long scEthernetXmit_TDT - taskTable + 0x000000d0
-.long scEthernetXmit_VarTab - taskTable /* Task 1 Variable Table */
-.long scEthernetXmit_FDT - taskTable + 0x03 /* Task 1 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetXmit_CSave - taskTable /* Task 1 context save space */
-.long 0xf0000000
-
-
-.globl scEthernetRecv_TDT
-scEthernetRecv_TDT: /* Task 0 Descriptor Table */
-.long 0xc4c50000 /* 0000: LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */
-.long 0x84c5e000 /* 0004: LCD: idx1 = var9 + var11; ; idx1 += inc0 */
-.long 0x10001f08 /* 0008: DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000380 /* 000C: DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f88 /* 0010: DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x010c504c /* 0020: DRD2B1: var4 = EU1(); EU1(var1,var12) */
-.long 0x82180349 /* 0024: LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */
-.long 0x81c68004 /* 0028: LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x70000000 /* 002C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018c504e /* 0030: DRD2B1: var6 = EU1(); EU1(var1,var14) */
-.long 0x70000000 /* 0034: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x020c504f /* 0038: DRD2B1: var8 = EU1(); EU1(var1,var15) */
-.long 0x00000b88 /* 003C: DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x8000d184 /* 0040: LCDEXT: idx1 = 0xf0003184; ; */
-.long 0xc6990452 /* 0044: LCDEXT: idx2 = var13; idx2 < var17; idx2 += inc2 */
-.long 0x81486010 /* 0048: LCD: idx3 = var2 + var16; ; idx3 += inc2 */
-.long 0x006acf88 /* 004C: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */
-.long 0x8000d184 /* 0050: LCDEXT: idx1 = 0xf0003184; ; */
-.long 0x86810492 /* 0054: LCD: idx2 = var13, idx3 = var2; idx2 < var18; idx2 += inc2, idx3 += inc2 */
-.long 0x006acf88 /* 0058: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */
-.long 0x8000d184 /* 005C: LCDEXT: idx1 = 0xf0003184; ; */
-.long 0x868184d2 /* 0060: LCD: idx2 = var13, idx3 = var3; idx2 < var19; idx2 += inc2, idx3 += inc2 */
-.long 0x000acf88 /* 0064: DRD1A: *idx3 = *idx1; FN=0 init=0 WS=1 RS=1 */
-.long 0xc318839b /* 0068: LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc3 */
-.long 0x80190000 /* 006C: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008468 /* 0070: DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4038358 /* 0074: LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc3, idx2 += inc0 */
-.long 0x81c50000 /* 0078: LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */
-.long 0x1000cb18 /* 007C: DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 0080: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc4188364 /* 0084: LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc4 */
-.long 0x83990000 /* 0088: LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */
-.long 0x10000c00 /* 008C: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x0000c800 /* 0090: DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 0094: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 0098: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 009C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080c504c /* 00A0: DRD2B1: idx0 = EU1(); EU1(var1,var12) */
-.long 0x000001f8 /* 00A4(:0): NOP */
-
-
-.globl scEthernetXmit_TDT
-scEthernetXmit_TDT: /* Task 1 Descriptor Table */
-.long 0x80014800 /* 0000: LCDEXT: idx0 = 0xf0004800; ; */
-.long 0x85c60004 /* 0004: LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x10002308 /* 0008: DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000f88 /* 000C: DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000380 /* 0010: DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x024c504d /* 0020: DRD2B1: var9 = EU1(); EU1(var1,var13) */
-.long 0x84980309 /* 0024: LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */
-.long 0xc0004003 /* 0028: LCDEXT: idx1 = 0x00000003; ; */
-.long 0x81c60004 /* 002C: LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
-.long 0x70000000 /* 0030: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x010c504e /* 0034: DRD2B1: var4 = EU1(); EU1(var1,var14) */
-.long 0x70000000 /* 0038: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x014c504f /* 003C: DRD2B1: var5 = EU1(); EU1(var1,var15) */
-.long 0x70000000 /* 0040: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x028c5050 /* 0044: DRD2B1: var10 = EU1(); EU1(var1,var16) */
-.long 0x70000000 /* 0048: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018c5051 /* 004C: DRD2B1: var6 = EU1(); EU1(var1,var17) */
-.long 0x10000b90 /* 0050: DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 0054: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x01cc50a1 /* 0058: DRD2B1: var7 = EU1(); EU1(var2,idx1) */
-.long 0xc2988312 /* 005C: LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */
-.long 0x83490000 /* 0060: LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */
-.long 0x00001b10 /* 0064: DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */
-.long 0x8000d1a4 /* 0068: LCDEXT: idx1 = 0xf00031a4; ; */
-.long 0x8301031c /* 006C: LCD: idx2 = var6, idx3 = var2; idx2 > var12; idx2 += inc3, idx3 += inc4 */
-.long 0x008ac798 /* 0070: DRD1A: *idx1 = *idx3; FN=0 init=4 WS=1 RS=1 */
-.long 0x8000d1a4 /* 0074: LCDEXT: idx1 = 0xf00031a4; ; */
-.long 0xc1430000 /* 0078: LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */
-.long 0x82998312 /* 007C: LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */
-.long 0x088ac790 /* 0080: DRD1A: *idx1 = *idx2; FN=0 TFD init=4 WS=1 RS=1 */
-.long 0x81988000 /* 0084: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x60000100 /* 0088: DRD2A: EU0=0 EU1=1 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x0c4c5c4d /* 008C: DRD2B1: *idx1 = EU1(); EU1(*idx1,var13) */
-.long 0xc21883ad /* 0090: LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */
-.long 0x80190000 /* 0094: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008460 /* 0098: DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4052305 /* 009C: LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */
-.long 0x81c98000 /* 00A0: LCD: idx3 = var3 + var19; idx3 once var0; idx3 += inc0 */
-.long 0x1000c718 /* 00A4: DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 00A8: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc4188000 /* 00AC: LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */
-.long 0x85190312 /* 00B0: LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */
-.long 0x10000c00 /* 00B4: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x1000c400 /* 00B8: DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00008860 /* 00BC: DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 00C0: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 00C4: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 00C8: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080c504d /* 00CC: DRD2B1: idx0 = EU1(); EU1(var1,var13) */
-.long 0x000001f8 /* 00D0(:0): NOP */
-
-.align 8
-
-.globl scEthernetRecv_VarTab
-scEthernetRecv_VarTab: /* Task 0 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long 0xf0004800 /* var[9] */
-.long 0x00000008 /* var[10] */
-.long 0x0000000c /* var[11] */
-.long 0x80000000 /* var[12] */
-.long 0x00000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x20000000 /* var[15] */
-.long 0x000005e4 /* var[16] */
-.long 0x0000000e /* var[17] */
-.long 0x000005e0 /* var[18] */
-.long 0x00000004 /* var[19] */
-.long 0x00000000 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x20000001 /* inc[2] */
-.long 0x80000000 /* inc[3] */
-.long 0x40000000 /* inc[4] */
-.long 0x00000000 /* inc[5] */
-.long 0x00000000 /* inc[6] */
-.long 0x00000000 /* inc[7] */
-
-.align 8
-
-.globl scEthernetXmit_VarTab
-scEthernetXmit_VarTab: /* Task 1 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long 0x00000000 /* var[9] */
-.long 0x00000000 /* var[10] */
-.long 0xf0004800 /* var[11] */
-.long 0x00000000 /* var[12] */
-.long 0x80000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x08000000 /* var[15] */
-.long 0x20000000 /* var[16] */
-.long 0x0000ffff /* var[17] */
-.long 0xffffffff /* var[18] */
-.long 0x00000008 /* var[19] */
-.long 0x00000000 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x40000000 /* inc[2] */
-.long 0x4000ffff /* inc[3] */
-.long 0xe0000001 /* inc[4] */
-.long 0x80000000 /* inc[5] */
-.long 0x00000000 /* inc[6] */
-.long 0x00000000 /* inc[7] */
-
-.align 8
-
-.globl scEthernetRecv_FDT
-scEthernetRecv_FDT: /* Task 0 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x05800000 /* and(), EU# 1 */
-.long 0x05400000 /* andn(), EU# 1 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-.align 8
-
-.globl scEthernetXmit_FDT
-scEthernetXmit_FDT: /* Task 1 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x05800000 /* and(), EU# 1 */
-.long 0x05400000 /* andn(), EU# 1 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-
-.align 8
-.globl scEthernetRecv_CSave
-scEthernetRecv_CSave: /* Task 0 context save space */
-.space 256, 0x0
-
-
-.align 8
-.globl scEthernetXmit_CSave
-scEthernetXmit_CSave: /* Task 1 context save space */
-.space 256, 0x0
-
-#endif /* CONFIG_MGT5100 */
diff --git a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S b/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
index d140c7e..00c2312 100644
--- a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
+++ b/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
@@ -6,8 +6,6 @@
#include <config.h>
-#if defined(CONFIG_MPC5200)
-
/* sas/sccg, gas target */
.section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */
.section smartdmaTaskTable,"aw",@progbits /* Task tables */
@@ -359,5 +357,3 @@ scEthernetRecv_CSave: /* Task 0 context save space */
.globl scEthernetXmit_CSave
scEthernetXmit_CSave: /* Task 1 context save space */
.space 128, 0x0
-
-#endif /* CONFIG_MPC5200 */
diff --git a/cpu/mpc5xxx/pci_mpc5200.c b/cpu/mpc5xxx/pci_mpc5200.c
index 225738a..8268f8a 100644
--- a/cpu/mpc5xxx/pci_mpc5200.c
+++ b/cpu/mpc5xxx/pci_mpc5200.c
@@ -23,7 +23,7 @@
#include <common.h>
-#if defined(CONFIG_PCI) && defined(CONFIG_MPC5200)
+#if defined(CONFIG_PCI)
#include <asm/processor.h>
#include <asm/io.h>
@@ -184,4 +184,4 @@ void pci_mpc5xxx_init (struct pci_controller *hose)
hose->last_busno = pci_hose_scan(hose);
}
-#endif /* CONFIG_PCI && CONFIG_MPC5200 */
+#endif /* CONFIG_PCI */
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c
index a8a384a..6675988 100644
--- a/cpu/mpc5xxx/serial.c
+++ b/cpu/mpc5xxx/serial.c
@@ -50,8 +50,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define PSC_BASE MPC5XXX_PSC2
#elif CONFIG_PSC_CONSOLE == 3
#define PSC_BASE MPC5XXX_PSC3
-#elif defined(CONFIG_MGT5100)
-#error CONFIG_PSC_CONSOLE must be in 1, 2 or 3
#elif CONFIG_PSC_CONSOLE == 4
#define PSC_BASE MPC5XXX_PSC4
#elif CONFIG_PSC_CONSOLE == 5
@@ -73,8 +71,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define PSC_BASE2 MPC5XXX_PSC2
#elif CONFIG_PSC_CONSOLE2 == 3
#define PSC_BASE2 MPC5XXX_PSC3
-#elif defined(CONFIG_MGT5100)
-#error CONFIG_PSC_CONSOLE2 must be in 1, 2 or 3
#elif CONFIG_PSC_CONSOLE2 == 4
#define PSC_BASE2 MPC5XXX_PSC4
#elif CONFIG_PSC_CONSOLE2 == 5
@@ -104,23 +100,14 @@ int serial_init (void)
psc->command = PSC_SEL_MODE_REG_1;
/* select clock sources */
-#if defined(CONFIG_MGT5100)
- psc->psc_clock_select = 0xdd00;
- baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32;
-#elif defined(CONFIG_MPC5200)
psc->psc_clock_select = 0;
baseclk = (gd->ipb_clk + 16) / 32;
-#endif
/* switch to UART mode */
psc->sicr = 0;
/* configure parity, bit length and so on */
-#if defined(CONFIG_MGT5100)
- psc->mode = PSC_MODE_ERR | PSC_MODE_8_BITS | PSC_MODE_PARNONE;
-#elif defined(CONFIG_MPC5200)
psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE;
-#endif
psc->mode = PSC_MODE_ONE_STOP;
/* set up UART divisor */
@@ -246,11 +233,7 @@ void serial_setbrg(void)
#endif
unsigned long baseclk, div;
-#if defined(CONFIG_MGT5100)
- baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32;
-#elif defined(CONFIG_MPC5200)
baseclk = (gd->ipb_clk + 16) / 32;
-#endif
/* set up UART divisor */
div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S
index d499da5..ba49944 100644
--- a/cpu/mpc5xxx/start.S
+++ b/cpu/mpc5xxx/start.S
@@ -111,9 +111,6 @@ boot_warm:
# if defined(CONFIG_SYS_RAMBOOT)
# error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT
# endif /* CONFIG_SYS_RAMBOOT */
-# if defined(CONFIG_MGT5100)
-# error CONFIG_SYS_LOWBOOT is incompatible with MGT5100
-# endif /* CONFIG_MGT5100 */
lis r4, CONFIG_SYS_DEFAULT_MBAR@h
lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
@@ -145,14 +142,9 @@ lowboot_reentry:
#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
lis r3, CONFIG_SYS_MBAR@h
ori r3, r3, CONFIG_SYS_MBAR@l
-#if defined(CONFIG_MPC5200)
/* MBAR is mirrored into the MBAR SPR */
mtspr MBAR,r3
rlwinm r3, r3, 16, 16, 31
-#endif
-#if defined(CONFIG_MGT5100)
- rlwinm r3, r3, 17, 15, 31
-#endif
lis r4, CONFIG_SYS_DEFAULT_MBAR@h
stw r3, 0(r4)
#endif /* CONFIG_SYS_DEFAULT_MBAR */
diff --git a/cpu/mpc5xxx/usb_ohci.c b/cpu/mpc5xxx/usb_ohci.c
index 66a4af8..7976e4d 100644
--- a/cpu/mpc5xxx/usb_ohci.c
+++ b/cpu/mpc5xxx/usb_ohci.c
@@ -76,13 +76,8 @@
#define m16_swap(x) swap_16(x)
#define m32_swap(x) swap_32(x)
-#ifdef CONFIG_MPC5200
#define ohci_cpu_to_le16(x) (x)
#define ohci_cpu_to_le32(x) (x)
-#else
-#define ohci_cpu_to_le16(x) swap_16(x)
-#define ohci_cpu_to_le32(x) swap_32(x)
-#endif
/* global ohci_t */
static ohci_t gohci;
@@ -803,9 +798,7 @@ static td_t * dl_reverse_done_list (ohci_t *ohci)
} else
td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
}
-#ifdef CONFIG_MPC5200
td_list->hwNextTD = 0;
-#endif
}
td_list->next_dl_td = td_rev;
diff --git a/cpu/mpc5xxx/usb_ohci.h b/cpu/mpc5xxx/usb_ohci.h
index 6eedbdd..629b529 100644
--- a/cpu/mpc5xxx/usb_ohci.h
+++ b/cpu/mpc5xxx/usb_ohci.h
@@ -127,13 +127,8 @@ typedef struct td td_t;
#define NUM_INTS 32 /* part of the OHCI standard */
struct ohci_hcca {
__u32 int_table[NUM_INTS]; /* Interrupt ED table */
-#if defined(CONFIG_MPC5200)
__u16 pad1; /* set to 0 on each frame_no change */
__u16 frame_no; /* current frame number */
-#else
- __u16 frame_no; /* current frame number */
- __u16 pad1; /* set to 0 on each frame_no change */
-#endif
__u32 done_head; /* info returned for an interrupt */
u8 reserved_for_hc[116];
} __attribute__((aligned(256)));
diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c
index 0fe3041..7a89b56 100644
--- a/drivers/fpga/spartan3.c
+++ b/drivers/fpga/spartan3.c
@@ -385,34 +385,38 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
} while ((*fn->init) (cookie));
/* Load the data */
- while (bytecount < bsize) {
-
- /* Xilinx detects an error if INIT goes low (active)
- while DONE is low (inactive) */
- if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) {
- puts ("** CRC error during FPGA load.\n");
- return (FPGA_FAIL);
- }
- val = data [bytecount ++];
- i = 8;
- do {
- /* Deassert the clock */
- (*fn->clk) (FALSE, TRUE, cookie);
- CONFIG_FPGA_DELAY ();
- /* Write data */
- (*fn->wr) ((val & 0x80), TRUE, cookie);
- CONFIG_FPGA_DELAY ();
- /* Assert the clock */
- (*fn->clk) (TRUE, TRUE, cookie);
- CONFIG_FPGA_DELAY ();
- val <<= 1;
- i --;
- } while (i > 0);
+ if(*fn->bwr)
+ (*fn->bwr) (data, bsize, TRUE, cookie);
+ else {
+ while (bytecount < bsize) {
+
+ /* Xilinx detects an error if INIT goes low (active)
+ while DONE is low (inactive) */
+ if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) {
+ puts ("** CRC error during FPGA load.\n");
+ return (FPGA_FAIL);
+ }
+ val = data [bytecount ++];
+ i = 8;
+ do {
+ /* Deassert the clock */
+ (*fn->clk) (FALSE, TRUE, cookie);
+ CONFIG_FPGA_DELAY ();
+ /* Write data */
+ (*fn->wr) ((val & 0x80), TRUE, cookie);
+ CONFIG_FPGA_DELAY ();
+ /* Assert the clock */
+ (*fn->clk) (TRUE, TRUE, cookie);
+ CONFIG_FPGA_DELAY ();
+ val <<= 1;
+ i --;
+ } while (i > 0);
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
- if (bytecount % (bsize / 40) == 0)
- putc ('.'); /* let them know we are alive */
+ if (bytecount % (bsize / 40) == 0)
+ putc ('.'); /* let them know we are alive */
#endif
+ }
}
CONFIG_FPGA_DELAY ();
diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c
index 1b20a76..8d0b6d6 100644
--- a/drivers/input/ps2ser.c
+++ b/drivers/input/ps2ser.c
@@ -36,8 +36,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define PSC_BASE MPC5XXX_PSC2
#elif CONFIG_PS2SERIAL == 3
#define PSC_BASE MPC5XXX_PSC3
-#elif defined(CONFIG_MGT5100)
-#error CONFIG_PS2SERIAL must be in 1, 2 or 3
#elif CONFIG_PS2SERIAL == 4
#define PSC_BASE MPC5XXX_PSC4
#elif CONFIG_PS2SERIAL == 5
@@ -87,23 +85,14 @@ int ps2ser_init(void)
psc->command = PSC_SEL_MODE_REG_1;
/* select clock sources */
-#if defined(CONFIG_MGT5100)
- psc->psc_clock_select = 0xdd00;
- baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32;
-#elif defined(CONFIG_MPC5200)
psc->psc_clock_select = 0;
baseclk = (gd->ipb_clk + 16) / 32;
-#endif
/* switch to UART mode */
psc->sicr = 0;
/* configure parity, bit length and so on */
-#if defined(CONFIG_MGT5100)
- psc->mode = PSC_MODE_ERR | PSC_MODE_8_BITS | PSC_MODE_PARNONE;
-#elif defined(CONFIG_MPC5200)
psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE;
-#endif
psc->mode = PSC_MODE_ONE_STOP;
/* set up UART divisor */
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index cd1a86e..d0240f5 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -605,6 +605,63 @@ static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
return retcode;
}
+static int use_flash_status_poll(flash_info_t *info)
+{
+#ifdef CONFIG_SYS_CFI_FLASH_STATUS_POLL
+ if (info->vendor == CFI_CMDSET_AMD_EXTENDED ||
+ info->vendor == CFI_CMDSET_AMD_STANDARD)
+ return 1;
+#endif
+ return 0;
+}
+
+static int flash_status_poll(flash_info_t *info, void *src, void *dst,
+ ulong tout, char *prompt)
+{
+#ifdef CONFIG_SYS_CFI_FLASH_STATUS_POLL
+ ulong start;
+ int ready;
+
+#if CONFIG_SYS_HZ != 1000
+ if ((ulong)CONFIG_SYS_HZ > 100000)
+ tout *= (ulong)CONFIG_SYS_HZ / 1000; /* for a big HZ, avoid overflow */
+ else
+ tout = DIV_ROUND_UP(tout * (ulong)CONFIG_SYS_HZ, 1000);
+#endif
+
+ /* Wait for command completion */
+ start = get_timer(0);
+ while (1) {
+ switch (info->portwidth) {
+ case FLASH_CFI_8BIT:
+ ready = flash_read8(dst) == flash_read8(src);
+ break;
+ case FLASH_CFI_16BIT:
+ ready = flash_read16(dst) == flash_read16(src);
+ break;
+ case FLASH_CFI_32BIT:
+ ready = flash_read32(dst) == flash_read32(src);
+ break;
+ case FLASH_CFI_64BIT:
+ ready = flash_read64(dst) == flash_read64(src);
+ break;
+ default:
+ ready = 0;
+ break;
+ }
+ if (ready)
+ break;
+ if (get_timer(start) > tout) {
+ printf("Flash %s timeout at address %lx data %lx\n",
+ prompt, (ulong)dst, (ulong)flash_read8(dst));
+ return ERR_TIMOUT;
+ }
+ udelay(1); /* also triggers watchdog */
+ }
+#endif /* CONFIG_SYS_CFI_FLASH_STATUS_POLL */
+ return ERR_OK;
+}
+
/*-----------------------------------------------------------------------
*/
static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
@@ -752,7 +809,12 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
if (!sect_found)
sect = find_sector (info, dest);
- return flash_full_status_check (info, sect, info->write_tout, "write");
+ if (use_flash_status_poll(info))
+ return flash_status_poll(info, &cword, dstaddr,
+ info->write_tout, "write");
+ else
+ return flash_full_status_check(info, sect,
+ info->write_tout, "write");
}
#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
@@ -914,9 +976,15 @@ static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
}
flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_BUFFER_CONFIRM);
- retcode = flash_full_status_check (info, sector,
- info->buffer_write_tout,
- "buffer write");
+ if (use_flash_status_poll(info))
+ retcode = flash_status_poll(info, src - (1 << shift),
+ dst - (1 << shift),
+ info->buffer_write_tout,
+ "buffer write");
+ else
+ retcode = flash_full_status_check(info, sector,
+ info->buffer_write_tout,
+ "buffer write");
break;
default:
@@ -938,6 +1006,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
int rcode = 0;
int prot;
flash_sect_t sect;
+ int st;
if (info->flash_id != FLASH_MAN_CFI) {
puts ("Can't erase unknown flash type - aborted\n");
@@ -1001,10 +1070,20 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
break;
}
- if (flash_full_status_check
- (info, sect, info->erase_blk_tout, "erase")) {
+ if (use_flash_status_poll(info)) {
+ cfiword_t cword = (cfiword_t)0xffffffffffffffffULL;
+ void *dest;
+ dest = flash_map(info, sect, 0);
+ st = flash_status_poll(info, &cword, dest,
+ info->erase_blk_tout, "erase");
+ flash_unmap(info, sect, 0, dest);
+ } else
+ st = flash_full_status_check(info, sect,
+ info->erase_blk_tout,
+ "erase");
+ if (st)
rcode = 1;
- } else if (flash_verbose)
+ else if (flash_verbose)
putc ('.');
}
}
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 40002be..d5eb54a 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -31,6 +31,209 @@
#include <nand.h>
+#ifdef CONFIG_ATMEL_NAND_HWECC
+
+/* Register access macros */
+#define ecc_readl(add, reg) \
+ readl(AT91_BASE_SYS + add + ATMEL_ECC_##reg)
+#define ecc_writel(add, reg, value) \
+ writel((value), AT91_BASE_SYS + add + ATMEL_ECC_##reg)
+
+#include "atmel_nand_ecc.h" /* Hardware ECC registers */
+
+/* oob layout for large page size
+ * bad block info is on bytes 0 and 1
+ * the bytes have to be consecutives to avoid
+ * several NAND_CMD_RNDOUT during read
+ */
+static struct nand_ecclayout atmel_oobinfo_large = {
+ .eccbytes = 4,
+ .eccpos = {60, 61, 62, 63},
+ .oobfree = {
+ {2, 58}
+ },
+};
+
+/* oob layout for small page size
+ * bad block info is on bytes 4 and 5
+ * the bytes have to be consecutives to avoid
+ * several NAND_CMD_RNDOUT during read
+ */
+static struct nand_ecclayout atmel_oobinfo_small = {
+ .eccbytes = 4,
+ .eccpos = {0, 1, 2, 3},
+ .oobfree = {
+ {6, 10}
+ },
+};
+
+/*
+ * Calculate HW ECC
+ *
+ * function called after a write
+ *
+ * mtd: MTD block structure
+ * dat: raw data (unused)
+ * ecc_code: buffer for ECC
+ */
+static int atmel_nand_calculate(struct mtd_info *mtd,
+ const u_char *dat, unsigned char *ecc_code)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ unsigned int ecc_value;
+
+ /* get the first 2 ECC bytes */
+ ecc_value = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR);
+
+ ecc_code[0] = ecc_value & 0xFF;
+ ecc_code[1] = (ecc_value >> 8) & 0xFF;
+
+ /* get the last 2 ECC bytes */
+ ecc_value = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, NPR) & ATMEL_ECC_NPARITY;
+
+ ecc_code[2] = ecc_value & 0xFF;
+ ecc_code[3] = (ecc_value >> 8) & 0xFF;
+
+ return 0;
+}
+
+/*
+ * HW ECC read page function
+ *
+ * mtd: mtd info structure
+ * chip: nand chip info structure
+ * buf: buffer to store read data
+ */
+static int atmel_nand_read_page(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf, int page)
+{
+ int eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint8_t *p = buf;
+ uint8_t *oob = chip->oob_poi;
+ uint8_t *ecc_pos;
+ int stat;
+
+ /* read the page */
+ chip->read_buf(mtd, p, eccsize);
+
+ /* move to ECC position if needed */
+ if (eccpos[0] != 0) {
+ /* This only works on large pages
+ * because the ECC controller waits for
+ * NAND_CMD_RNDOUTSTART after the
+ * NAND_CMD_RNDOUT.
+ * anyway, for small pages, the eccpos[0] == 0
+ */
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+ mtd->writesize + eccpos[0], -1);
+ }
+
+ /* the ECC controller needs to read the ECC just after the data */
+ ecc_pos = oob + eccpos[0];
+ chip->read_buf(mtd, ecc_pos, eccbytes);
+
+ /* check if there's an error */
+ stat = chip->ecc.correct(mtd, p, oob, NULL);
+
+ if (stat < 0)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+
+ /* get back to oob start (end of page) */
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+
+ /* read the oob */
+ chip->read_buf(mtd, oob, mtd->oobsize);
+
+ return 0;
+}
+
+/*
+ * HW ECC Correction
+ *
+ * function called after a read
+ *
+ * mtd: MTD block structure
+ * dat: raw data read from the chip
+ * read_ecc: ECC from the chip (unused)
+ * isnull: unused
+ *
+ * Detect and correct a 1 bit error for a page
+ */
+static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *isnull)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ unsigned int ecc_status, ecc_parity, ecc_mode;
+ unsigned int ecc_word, ecc_bit;
+
+ /* get the status from the Status Register */
+ ecc_status = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, SR);
+
+ /* if there's no error */
+ if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
+ return 0;
+
+ /* get error bit offset (4 bits) */
+ ecc_bit = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR) & ATMEL_ECC_BITADDR;
+ /* get word address (12 bits) */
+ ecc_word = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR) & ATMEL_ECC_WORDADDR;
+ ecc_word >>= 4;
+
+ /* if there are multiple errors */
+ if (ecc_status & ATMEL_ECC_MULERR) {
+ /* check if it is a freshly erased block
+ * (filled with 0xff) */
+ if ((ecc_bit == ATMEL_ECC_BITADDR)
+ && (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
+ /* the block has just been erased, return OK */
+ return 0;
+ }
+ /* it doesn't seems to be a freshly
+ * erased block.
+ * We can't correct so many errors */
+ printk(KERN_WARNING "atmel_nand : multiple errors detected."
+ " Unable to correct.\n");
+ return -EIO;
+ }
+
+ /* if there's a single bit error : we can correct it */
+ if (ecc_status & ATMEL_ECC_ECCERR) {
+ /* there's nothing much to do here.
+ * the bit error is on the ECC itself.
+ */
+ printk(KERN_WARNING "atmel_nand : one bit error on ECC code."
+ " Nothing to correct\n");
+ return 0;
+ }
+
+ printk(KERN_WARNING "atmel_nand : one bit error on data."
+ " (word offset in the page :"
+ " 0x%x bit offset : 0x%x)\n",
+ ecc_word, ecc_bit);
+ /* correct the error */
+ if (nand_chip->options & NAND_BUSWIDTH_16) {
+ /* 16 bits words */
+ ((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
+ } else {
+ /* 8 bits words */
+ dat[ecc_word] ^= (1 << ecc_bit);
+ }
+ printk(KERN_WARNING "atmel_nand : error corrected\n");
+ return 1;
+}
+
+/*
+ * Enable HW ECC : unused on most chips
+ */
+static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
+{
+}
+#endif
+
static void at91_nand_hwcontrol(struct mtd_info *mtd,
int cmd, unsigned int ctrl)
{
@@ -64,6 +267,11 @@ static int at91_nand_ready(struct mtd_info *mtd)
int board_nand_init(struct nand_chip *nand)
{
+#ifdef CONFIG_ATMEL_NAND_HWECC
+ static int chip_nr = 0;
+ struct mtd_info *mtd;
+#endif
+
nand->ecc.mode = NAND_ECC_SOFT;
#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
@@ -74,5 +282,62 @@ int board_nand_init(struct nand_chip *nand)
#endif
nand->chip_delay = 20;
+#ifdef CONFIG_ATMEL_NAND_HWECC
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.calculate = atmel_nand_calculate;
+ nand->ecc.correct = atmel_nand_correct;
+ nand->ecc.hwctl = atmel_nand_hwctl;
+ nand->ecc.read_page = atmel_nand_read_page;
+ nand->ecc.bytes = 4;
+#endif
+
+#ifdef CONFIG_ATMEL_NAND_HWECC
+ mtd = &nand_info[chip_nr++];
+ mtd->priv = nand;
+
+ /* Detect NAND chips */
+ if (nand_scan_ident(mtd, 1)) {
+ printk(KERN_WARNING "NAND Flash not found !\n");
+ return -ENXIO;
+ }
+
+ if (nand->ecc.mode == NAND_ECC_HW) {
+ /* ECC is calculated for the whole page (1 step) */
+ nand->ecc.size = mtd->writesize;
+
+ /* set ECC page size and oob layout */
+ switch (mtd->writesize) {
+ case 512:
+ nand->ecc.layout = &atmel_oobinfo_small;
+ ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_528);
+ break;
+ case 1024:
+ nand->ecc.layout = &atmel_oobinfo_large;
+ ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_1056);
+ break;
+ case 2048:
+ nand->ecc.layout = &atmel_oobinfo_large;
+ ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_2112);
+ break;
+ case 4096:
+ nand->ecc.layout = &atmel_oobinfo_large;
+ ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_4224);
+ break;
+ default:
+ /* page size not handled by HW ECC */
+ /* switching back to soft ECC */
+ nand->ecc.mode = NAND_ECC_SOFT;
+ nand->ecc.calculate = NULL;
+ nand->ecc.correct = NULL;
+ nand->ecc.hwctl = NULL;
+ nand->ecc.read_page = NULL;
+ nand->ecc.postpad = 0;
+ nand->ecc.prepad = 0;
+ nand->ecc.bytes = 0;
+ break;
+ }
+ }
+#endif
+
return 0;
}
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
new file mode 100644
index 0000000..1ee7f99
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -0,0 +1,36 @@
+/*
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ATMEL_NAND_ECC_H
+#define ATMEL_NAND_ECC_H
+
+#define ATMEL_ECC_CR 0x00 /* Control register */
+#define ATMEL_ECC_RST (1 << 0) /* Reset parity */
+
+#define ATMEL_ECC_MR 0x04 /* Mode register */
+#define ATMEL_ECC_PAGESIZE (3 << 0) /* Page Size */
+#define ATMEL_ECC_PAGESIZE_528 (0)
+#define ATMEL_ECC_PAGESIZE_1056 (1)
+#define ATMEL_ECC_PAGESIZE_2112 (2)
+#define ATMEL_ECC_PAGESIZE_4224 (3)
+
+#define ATMEL_ECC_SR 0x08 /* Status register */
+#define ATMEL_ECC_RECERR (1 << 0) /* Recoverable Error */
+#define ATMEL_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
+#define ATMEL_ECC_MULERR (1 << 2) /* Multiple Errors */
+
+#define ATMEL_ECC_PR 0x0c /* Parity register */
+#define ATMEL_ECC_BITADDR (0xf << 0) /* Bit Error Address */
+#define ATMEL_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
+
+#define ATMEL_ECC_NPR 0x10 /* NParity register */
+#define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */
+
+#endif
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index bfc2acf..4ca738e 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -57,8 +57,6 @@
#define ECC_STATE_ERR_CORR_COMP_P 0x2
#define ECC_STATE_ERR_CORR_COMP_N 0x3
-static emif_registers *const emif_regs = (void *) DAVINCI_ASYNC_EMIF_CNTRL_BASE;
-
/*
* Exploit the little endianness of the ARM to do multi-byte transfers
* per device read. This can perform over twice as quickly as individual
@@ -93,7 +91,7 @@ static void nand_davinci_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
/* copy aligned data */
while (len >= 4) {
- *(u32 *)buf = readl(nand);
+ *(u32 *)buf = __raw_readl(nand);
buf += 4;
len -= 4;
}
@@ -138,7 +136,7 @@ static void nand_davinci_write_buf(struct mtd_info *mtd, const uint8_t *buf,
/* copy aligned data */
while (len >= 4) {
- writel(*(u32 *)buf, nand);
+ __raw_writel(*(u32 *)buf, nand);
buf += 4;
len -= 4;
}
@@ -156,7 +154,8 @@ static void nand_davinci_write_buf(struct mtd_info *mtd, const uint8_t *buf,
}
}
-static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
u_int32_t IO_ADDR_W = (u_int32_t)this->IO_ADDR_W;
@@ -164,9 +163,9 @@ static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int c
if (ctrl & NAND_CTRL_CHANGE) {
IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
- if ( ctrl & NAND_CLE )
+ if (ctrl & NAND_CLE)
IO_ADDR_W |= MASK_CLE;
- if ( ctrl & NAND_ALE )
+ if (ctrl & NAND_ALE)
IO_ADDR_W |= MASK_ALE;
this->IO_ADDR_W = (void __iomem *) IO_ADDR_W;
}
@@ -181,24 +180,26 @@ static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
{
u_int32_t val;
- (void)readl(&(emif_regs->NANDFECC[CONFIG_SYS_NAND_CS - 2]));
+ (void)__raw_readl(&(davinci_emif_regs->nandfecc[
+ CONFIG_SYS_NAND_CS - 2]));
- val = readl(&emif_regs->NANDFCR);
+ val = __raw_readl(&davinci_emif_regs->nandfcr);
val |= DAVINCI_NANDFCR_NAND_ENABLE(CONFIG_SYS_NAND_CS);
val |= DAVINCI_NANDFCR_1BIT_ECC_START(CONFIG_SYS_NAND_CS);
- writel(val, &emif_regs->NANDFCR);
+ __raw_writel(val, &davinci_emif_regs->nandfcr);
}
static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region)
{
u_int32_t ecc = 0;
- ecc = readl(&(emif_regs->NANDFECC[region - 1]));
+ ecc = __raw_readl(&(davinci_emif_regs->nandfecc[region - 1]));
- return(ecc);
+ return ecc;
}
-static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
{
u_int32_t tmp;
const int region = 1;
@@ -232,7 +233,8 @@ static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
return 0;
}
-static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
{
struct nand_chip *this = mtd->priv;
u_int32_t ecc_nand = read_ecc[0] | (read_ecc[1] << 8) |
@@ -268,7 +270,7 @@ static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *
return -1;
}
}
- return(0);
+ return 0;
}
#endif /* CONFIG_SYS_NAND_HW_ECC */
@@ -315,15 +317,15 @@ static void nand_davinci_4bit_enable_hwecc(struct mtd_info *mtd, int mode)
* Start a new ECC calculation for reading or writing 512 bytes
* of data.
*/
- val = readl(&emif_regs->NANDFCR);
+ val = __raw_readl(&davinci_emif_regs->nandfcr);
val &= ~DAVINCI_NANDFCR_4BIT_ECC_SEL_MASK;
val |= DAVINCI_NANDFCR_NAND_ENABLE(CONFIG_SYS_NAND_CS);
val |= DAVINCI_NANDFCR_4BIT_ECC_SEL(CONFIG_SYS_NAND_CS);
val |= DAVINCI_NANDFCR_4BIT_ECC_START;
- writel(val, &emif_regs->NANDFCR);
+ __raw_writel(val, &davinci_emif_regs->nandfcr);
break;
case NAND_ECC_READSYN:
- val = emif_regs->NAND4BITECC1;
+ val = __raw_readl(&davinci_emif_regs->nand4bitecc[0]);
break;
default:
break;
@@ -332,10 +334,12 @@ static void nand_davinci_4bit_enable_hwecc(struct mtd_info *mtd, int mode)
static u32 nand_davinci_4bit_readecc(struct mtd_info *mtd, unsigned int ecc[4])
{
- ecc[0] = emif_regs->NAND4BITECC1 & NAND_4BITECC_MASK;
- ecc[1] = emif_regs->NAND4BITECC2 & NAND_4BITECC_MASK;
- ecc[2] = emif_regs->NAND4BITECC3 & NAND_4BITECC_MASK;
- ecc[3] = emif_regs->NAND4BITECC4 & NAND_4BITECC_MASK;
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ ecc[i] = __raw_readl(&davinci_emif_regs->nand4bitecc[i]) &
+ NAND_4BITECC_MASK;
+ }
return 0;
}
@@ -418,32 +422,36 @@ static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat,
*/
/*Take 2 bits from 8th byte and 8 bits from 9th byte */
- writel(((ecc16[4]) >> 6) & 0x3FF, &emif_regs->NAND4BITECCLOAD);
+ __raw_writel(((ecc16[4]) >> 6) & 0x3FF,
+ &davinci_emif_regs->nand4biteccload);
/* Take 4 bits from 7th byte and 6 bits from 8th byte */
- writel((((ecc16[3]) >> 12) & 0xF) | ((((ecc16[4])) << 4) & 0x3F0),
- &emif_regs->NAND4BITECCLOAD);
+ __raw_writel((((ecc16[3]) >> 12) & 0xF) | ((((ecc16[4])) << 4) & 0x3F0),
+ &davinci_emif_regs->nand4biteccload);
/* Take 6 bits from 6th byte and 4 bits from 7th byte */
- writel((ecc16[3] >> 2) & 0x3FF, &emif_regs->NAND4BITECCLOAD);
+ __raw_writel((ecc16[3] >> 2) & 0x3FF,
+ &davinci_emif_regs->nand4biteccload);
/* Take 8 bits from 5th byte and 2 bits from 6th byte */
- writel(((ecc16[2]) >> 8) | ((((ecc16[3])) << 8) & 0x300),
- &emif_regs->NAND4BITECCLOAD);
+ __raw_writel(((ecc16[2]) >> 8) | ((((ecc16[3])) << 8) & 0x300),
+ &davinci_emif_regs->nand4biteccload);
/*Take 2 bits from 3rd byte and 8 bits from 4th byte */
- writel((((ecc16[1]) >> 14) & 0x3) | ((((ecc16[2])) << 2) & 0x3FC),
- &emif_regs->NAND4BITECCLOAD);
+ __raw_writel((((ecc16[1]) >> 14) & 0x3) | ((((ecc16[2])) << 2) & 0x3FC),
+ &davinci_emif_regs->nand4biteccload);
/* Take 4 bits form 2nd bytes and 6 bits from 3rd bytes */
- writel(((ecc16[1]) >> 4) & 0x3FF, &emif_regs->NAND4BITECCLOAD);
+ __raw_writel(((ecc16[1]) >> 4) & 0x3FF,
+ &davinci_emif_regs->nand4biteccload);
/* Take 6 bits from 1st byte and 4 bits from 2nd byte */
- writel((((ecc16[0]) >> 10) & 0x3F) | (((ecc16[1]) << 6) & 0x3C0),
- &emif_regs->NAND4BITECCLOAD);
+ __raw_writel((((ecc16[0]) >> 10) & 0x3F) | (((ecc16[1]) << 6) & 0x3C0),
+ &davinci_emif_regs->nand4biteccload);
/* Take 10 bits from 0th and 1st bytes */
- writel((ecc16[0]) & 0x3FF, &emif_regs->NAND4BITECCLOAD);
+ __raw_writel((ecc16[0]) & 0x3FF,
+ &davinci_emif_regs->nand4biteccload);
/*
* Perform a dummy read to the EMIF Revision Code and Status register.
@@ -451,7 +459,7 @@ static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat,
* writing the ECC values in previous step.
*/
- val = emif_regs->NANDFSR;
+ val = __raw_readl(&davinci_emif_regs->nandfsr);
/*
* Read the syndrome from the NAND Flash 4-Bit ECC 1-4 registers.
@@ -467,13 +475,13 @@ static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat,
* Clear any previous address calculation by doing a dummy read of an
* error address register.
*/
- val = emif_regs->NANDERRADD1;
+ val = __raw_readl(&davinci_emif_regs->nanderradd1);
/*
* Set the addr_calc_st bit(bit no 13) in the NAND Flash Control
* register to 1.
*/
- emif_regs->NANDFCR |= 1 << 13;
+ __raw_writel(1 << 13, &davinci_emif_regs->nandfcr);
/*
* Wait for the corr_state field (bits 8 to 11)in the
@@ -481,12 +489,12 @@ static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat,
*/
i = NAND_TIMEOUT;
do {
- val = emif_regs->NANDFSR;
+ val = __raw_readl(&davinci_emif_regs->nandfsr);
val &= 0xc00;
i--;
} while ((i > 0) && val);
- iserror = emif_regs->NANDFSR;
+ iserror = __raw_readl(&davinci_emif_regs->nandfsr);
iserror &= EMIF_NANDFSR_ECC_STATE_MASK;
iserror = iserror >> 8;
@@ -501,32 +509,33 @@ static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat,
*/
if (iserror == ECC_STATE_NO_ERR) {
- val = emif_regs->NANDERRVAL1;
+ val = __raw_readl(&davinci_emif_regs->nanderrval1);
return 0;
} else if (iserror == ECC_STATE_TOO_MANY_ERRS) {
- val = emif_regs->NANDERRVAL1;
+ val = __raw_readl(&davinci_emif_regs->nanderrval1);
return -1;
}
- numerrors = ((emif_regs->NANDFSR >> 16) & 0x3) + 1;
+ numerrors = ((__raw_readl(&davinci_emif_regs->nandfsr) >> 16)
+ & 0x3) + 1;
/* Read the error address, error value and correct */
for (i = 0; i < numerrors; i++) {
if (i > 1) {
erroraddress =
- ((emif_regs->NANDERRADD2 >>
+ ((__raw_readl(&davinci_emif_regs->nanderradd2) >>
(16 * (i & 1))) & 0x3FF);
erroraddress = ((512 + 7) - erroraddress);
errorvalue =
- ((emif_regs->NANDERRVAL2 >>
+ ((__raw_readl(&davinci_emif_regs->nanderrval2) >>
(16 * (i & 1))) & 0xFF);
} else {
erroraddress =
- ((emif_regs->NANDERRADD1 >>
+ ((__raw_readl(&davinci_emif_regs->nanderradd1) >>
(16 * (i & 1))) & 0x3FF);
erroraddress = ((512 + 7) - erroraddress);
errorvalue =
- ((emif_regs->NANDERRVAL1 >>
+ ((__raw_readl(&davinci_emif_regs->nanderrval1) >>
(16 * (i & 1))) & 0xFF);
}
/* xor the corrupt data with error value */
@@ -540,7 +549,7 @@ static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat,
static int nand_davinci_dev_ready(struct mtd_info *mtd)
{
- return emif_regs->NANDFSR & 0x1;
+ return __raw_readl(&davinci_emif_regs->nandfsr) & 0x1;
}
static void nand_flash_init(void)
@@ -561,21 +570,22 @@ static void nand_flash_init(void)
* *
*------------------------------------------------------------------*/
acfg1 = 0
- | (0 << 31 ) /* selectStrobe */
- | (0 << 30 ) /* extWait */
- | (1 << 26 ) /* writeSetup 10 ns */
- | (3 << 20 ) /* writeStrobe 40 ns */
- | (1 << 17 ) /* writeHold 10 ns */
- | (1 << 13 ) /* readSetup 10 ns */
- | (5 << 7 ) /* readStrobe 60 ns */
- | (1 << 4 ) /* readHold 10 ns */
- | (3 << 2 ) /* turnAround ?? ns */
- | (0 << 0 ) /* asyncSize 8-bit bus */
+ | (0 << 31) /* selectStrobe */
+ | (0 << 30) /* extWait */
+ | (1 << 26) /* writeSetup 10 ns */
+ | (3 << 20) /* writeStrobe 40 ns */
+ | (1 << 17) /* writeHold 10 ns */
+ | (1 << 13) /* readSetup 10 ns */
+ | (5 << 7) /* readStrobe 60 ns */
+ | (1 << 4) /* readHold 10 ns */
+ | (3 << 2) /* turnAround ?? ns */
+ | (0 << 0) /* asyncSize 8-bit bus */
;
- emif_regs->AB1CR = acfg1; /* CS2 */
+ __raw_writel(acfg1, &davinci_emif_regs->ab1cr); /* CS2 */
- emif_regs->NANDFCR = 0x00000101; /* NAND flash on CS2 */
+ /* NAND flash on CS2 */
+ __raw_writel(0x00000101, &davinci_emif_regs->nandfcr);
#endif
}
diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c
index 1876b76..c2b1bbd 100644
--- a/drivers/net/mpc5xxx_fec.c
+++ b/drivers/net/mpc5xxx_fec.c
@@ -336,13 +336,11 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
*/
fec->eth->xmit_fsm = 0x03000000;
-#if defined(CONFIG_MPC5200)
/*
- * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't
+ * Turn off COMM bus prefetch in the MPC5200 BestComm. It doesn't
* work w/ the current receive task.
*/
sdma->PtdCntrl |= 0x00000001;
-#endif
/*
* Set priority of different initiators
@@ -579,9 +577,7 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
/********************************************************************/
static void mpc5xxx_fec_halt(struct eth_device *dev)
{
-#if defined(CONFIG_MPC5200)
struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA;
-#endif
mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
int counter = 0xffff;
@@ -611,13 +607,11 @@ static void mpc5xxx_fec_halt(struct eth_device *dev)
SDMA_TASK_DISABLE (FEC_XMIT_TASK_NO);
SDMA_TASK_DISABLE (FEC_RECV_TASK_NO);
-#if defined(CONFIG_MPC5200)
/*
- * Turn on COMM bus prefetch in the MGT5200 BestComm after we're
+ * Turn on COMM bus prefetch in the MPC5200 BestComm after we're
* done. It doesn't work w/ the current receive task.
*/
sdma->PtdCntrl &= ~0x00000001;
-#endif
/*
* Disable the Ethernet Controller
diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c
index 0b53140..d93b24b 100644
--- a/drivers/serial/mcfuart.c
+++ b/drivers/serial/mcfuart.c
@@ -34,7 +34,7 @@
DECLARE_GLOBAL_DATA_PTR;
-extern void uart_port_conf(void);
+extern void uart_port_conf(int port);
int serial_init(void)
{
@@ -43,7 +43,7 @@ int serial_init(void)
uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
- uart_port_conf();
+ uart_port_conf(CONFIG_SYS_UART_PORT);
/* write to SICR: SIM2 = uart mode,dcd does not affect rx */
uart->ucr = UART_UCR_RESET_RX;
diff --git a/include/asm-arm/arch-davinci/emif_defs.h b/include/asm-arm/arch-davinci/emif_defs.h
index aa57703..b48ec17 100644
--- a/include/asm-arm/arch-davinci/emif_defs.h
+++ b/include/asm-arm/arch-davinci/emif_defs.h
@@ -24,47 +24,42 @@
#include <asm/arch/hardware.h>
-typedef struct davinci_emif_regs {
- dv_reg ERCSR;
- dv_reg AWCCR;
- dv_reg SDBCR;
- dv_reg SDRCR;
- dv_reg AB1CR;
- dv_reg AB2CR;
- dv_reg AB3CR;
- dv_reg AB4CR;
- dv_reg SDTIMR;
- dv_reg DDRSR;
- dv_reg DDRPHYCR;
- dv_reg DDRPHYSR;
- dv_reg TOTAR;
- dv_reg TOTACTR;
- dv_reg DDRPHYID_REV;
- dv_reg SDSRETR;
- dv_reg EIRR;
- dv_reg EIMR;
- dv_reg EIMSR;
- dv_reg EIMCR;
- dv_reg IOCTRLR;
- dv_reg IOSTATR;
- u_int8_t RSVD0[8];
- dv_reg NANDFCR;
- dv_reg NANDFSR;
- u_int8_t RSVD1[8];
- dv_reg NANDFECC[4];
- u_int8_t RSVD2[60];
- dv_reg NAND4BITECCLOAD;
- dv_reg NAND4BITECC1;
- dv_reg NAND4BITECC2;
- dv_reg NAND4BITECC3;
- dv_reg NAND4BITECC4;
- dv_reg NANDERRADD1;
- dv_reg NANDERRADD2;
- dv_reg NANDERRVAL1;
- dv_reg NANDERRVAL2;
-} emif_registers;
-
-typedef emif_registers *emifregs;
+struct davinci_emif_regs {
+ u_int32_t ercsr;
+ u_int32_t awccr;
+ u_int32_t sdbcr;
+ u_int32_t sdrcr;
+ u_int32_t ab1cr;
+ u_int32_t ab2cr;
+ u_int32_t ab3cr;
+ u_int32_t ab4cr;
+ u_int32_t sdtimr;
+ u_int32_t ddrsr;
+ u_int32_t ddrphycr;
+ u_int32_t ddrphysr;
+ u_int32_t totar;
+ u_int32_t totactr;
+ u_int32_t ddrphyid_rev;
+ u_int32_t sdsretr;
+ u_int32_t eirr;
+ u_int32_t eimr;
+ u_int32_t eimsr;
+ u_int32_t eimcr;
+ u_int32_t ioctrlr;
+ u_int32_t iostatr;
+ u_int8_t rsvd0[8];
+ u_int32_t nandfcr;
+ u_int32_t nandfsr;
+ u_int8_t rsvd1[8];
+ u_int32_t nandfecc[4];
+ u_int8_t rsvd2[60];
+ u_int32_t nand4biteccload;
+ u_int32_t nand4bitecc[4];
+ u_int32_t nanderradd1;
+ u_int32_t nanderradd2;
+ u_int32_t nanderrval1;
+ u_int32_t nanderrval2;
+};
#define davinci_emif_regs \
((struct davinci_emif_regs *)DAVINCI_ASYNC_EMIF_CNTRL_BASE)
diff --git a/include/asm-m68k/cache.h b/include/asm-m68k/cache.h
new file mode 100644
index 0000000..7c84e48
--- /dev/null
+++ b/include/asm-m68k/cache.h
@@ -0,0 +1,210 @@
+/*
+ * ColdFire cache
+ *
+ * Copyright (C) 2004-2010 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CACHE_H
+#define __CACHE_H
+
+#if defined(CONFIG_MCF520x) || defined(CONFIG_MCF523x) || \
+ defined(CONFIG_MCF52x2) || defined(CONFIG_MCF5227x)
+#define CONFIG_CF_V2
+#endif
+
+#if defined(CONFIG_MCF532x) || defined(CONFIG_MCF5301x)
+#define CONFIG_CF_V3
+#endif
+
+#if defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x)
+#define CONFIG_CF_V4
+#if defined(CONFIG_MCF5441x)
+#define CONFIG_CF_V4E /* Four Extra ACRn */
+#endif
+#endif
+
+/* ***** CACR ***** */
+/* V2 Core */
+#ifdef CONFIG_CF_V2
+
+#define CF_CACR_CENB (1 << 31)
+#define CF_CACR_CPD (1 << 28)
+#define CF_CACR_CFRZ (1 << 27)
+#define CF_CACR_CEIB (1 << 10)
+#define CF_CACR_DCM (1 << 9)
+#define CF_CACR_DBWE (1 << 8)
+
+#if defined(CONFIG_MCF5249) || defined(CONFIG_MCF5253)
+#define CF_CACR_DWP (1 << 6)
+#else
+#define CF_CACR_CINV (1 << 24)
+#define CF_CACR_DISI (1 << 23)
+#define CF_CACR_DISD (1 << 22)
+#define CF_CACR_INVI (1 << 21)
+#define CF_CACR_INVD (1 << 20)
+#define CF_CACR_DWP (1 << 5)
+#define CF_CACR_EUSP (1 << 4)
+#endif /* CONFIG_MCF5249 || CONFIG_MCF5253 */
+
+#endif /* CONFIG_CF_V2 */
+
+/* V3 Core */
+#ifdef CONFIG_CF_V3
+
+#define CF_CACR_EC (1 << 31)
+#define CF_CACR_ESB (1 << 29)
+#define CF_CACR_DPI (1 << 28)
+#define CF_CACR_HLCK (1 << 27)
+#define CF_CACR_CINVA (1 << 24)
+#define CF_CACR_DNFB (1 << 10)
+#define CF_CACR_DCM_UNMASK 0xFFFFFCFF
+#define CF_CACR_DCM_WT (0 << 8)
+#define CF_CACR_DCM_CB (1 << 8)
+#define CF_CACR_DCM_P (2 << 8)
+#define CF_CACR_DCM_IP (3 << 8)
+#define CF_CACR_DW (1 << 5)
+#define CF_CACR_EUSP (1 << 4)
+
+#endif /* CONFIG_CF_V3 */
+
+/* V4 Core */
+#ifdef CONFIG_CF_V4
+
+#define CF_CACR_DEC (1 << 31)
+#define CF_CACR_DW (1 << 30)
+#define CF_CACR_DESB (1 << 29)
+#define CF_CACR_DDPI (1 << 28)
+#define CF_CACR_DHLCK (1 << 27)
+#define CF_CACR_DDCM_UNMASK (0xF9FFFFFF)
+#define CF_CACR_DDCM_WT (0 << 25)
+#define CF_CACR_DDCM_CB (1 << 25)
+#define CF_CACR_DDCM_P (2 << 25)
+#define CF_CACR_DDCM_IP (3 << 25)
+#define CF_CACR_DCINVA (1 << 24)
+
+#define CF_CACR_DDSP (1 << 23)
+#define CF_CACR_BEC (1 << 19)
+#define CF_CACR_BCINVA (1 << 18)
+#define CF_CACR_IEC (1 << 15)
+#define CF_CACR_DNFB (1 << 13)
+#define CF_CACR_IDPI (1 << 12)
+#define CF_CACR_IHLCK (1 << 11)
+#define CF_CACR_IDCM (1 << 10)
+#define CF_CACR_ICINVA (1 << 8)
+#define CF_CACR_IDSP (1 << 7)
+#define CF_CACR_EUSP (1 << 5)
+
+#ifdef CONFIG_MCF5445x
+#define CF_CACR_IVO (1 << 20)
+#define CF_CACR_SPA (1 << 14)
+#else
+#define CF_CACR_DF (1 << 4)
+#endif
+
+#endif /* CONFIG_CF_V4 */
+
+/* ***** ACR ***** */
+#define CF_ACR_ADR_UNMASK (0x00FFFFFF)
+#define CF_ACR_ADR(x) ((x & 0xFF) << 24)
+#define CF_ACR_ADRMSK_UNMASK (0xFF00FFFF)
+#define CF_ACR_ADRMSK(x) ((x & 0xFF) << 16)
+#define CF_ACR_EN (1 << 15)
+#define CF_ACR_SM_UNMASK (0xFFFF9FFF)
+#define CF_ACR_SM_UM (0 << 13)
+#define CF_ACR_SM_SM (1 << 13)
+#define CF_ACR_SM_ALL (3 << 13)
+#define CF_ACR_WP (1 << 2)
+
+/* V2 Core */
+#ifdef CONFIG_CF_V2
+#define CF_ACR_CM (1 << 6)
+#define CF_ACR_BWE (1 << 5)
+#else
+/* V3 & V4 */
+#define CF_ACR_CM_UNMASK (0xFFFFFF9F)
+#define CF_ACR_CM_WT (0 << 5)
+#define CF_ACR_CM_CB (1 << 5)
+#define CF_ACR_CM_P (2 << 5)
+#define CF_ACR_CM_IP (3 << 5)
+#endif /* CONFIG_CF_V2 */
+
+/* V4 Core */
+#ifdef CONFIG_CF_V4
+#define CF_ACR_AMM (1 << 10)
+#define CF_ACR_SP (1 << 3)
+#endif /* CONFIG_CF_V4 */
+
+
+#ifndef CONFIG_SYS_CACHE_ICACR
+#define CONFIG_SYS_CACHE_ICACR 0
+#endif
+
+#ifndef CONFIG_SYS_CACHE_DCACR
+#ifdef CONFIG_SYS_CACHE_ICACR
+#define CONFIG_SYS_CACHE_DCACR CONFIG_SYS_CACHE_ICACR
+#else
+#define CONFIG_SYS_CACHE_DCACR 0
+#endif
+#endif
+
+#ifndef CONFIG_SYS_CACHE_ACR0
+#define CONFIG_SYS_CACHE_ACR0 0
+#endif
+
+#ifndef CONFIG_SYS_CACHE_ACR1
+#define CONFIG_SYS_CACHE_ACR1 0
+#endif
+
+#ifndef CONFIG_SYS_CACHE_ACR2
+#define CONFIG_SYS_CACHE_ACR2 0
+#endif
+
+#ifndef CONFIG_SYS_CACHE_ACR3
+#define CONFIG_SYS_CACHE_ACR3 0
+#endif
+
+#ifndef CONFIG_SYS_CACHE_ACR4
+#define CONFIG_SYS_CACHE_ACR4 0
+#endif
+
+#ifndef CONFIG_SYS_CACHE_ACR5
+#define CONFIG_SYS_CACHE_ACR5 0
+#endif
+
+#ifndef CONFIG_SYS_CACHE_ACR6
+#define CONFIG_SYS_CACHE_ACR6 0
+#endif
+
+#ifndef CONFIG_SYS_CACHE_ACR7
+#define CONFIG_SYS_CACHE_ACR7 0
+#endif
+
+#define CF_ADDRMASK(x) (((x > 0x10) ? ((x >> 4) - 1) : (x)) << 16)
+
+#ifndef __ASSEMBLY__ /* put C only stuff in this section */
+
+void icache_invalid(void);
+void dcache_invalid(void);
+
+#endif
+
+#endif /* __CACHE_H */
diff --git a/include/asm-m68k/immap_5253.h b/include/asm-m68k/immap_5253.h
index b5a4cb5..28cd107 100644
--- a/include/asm-m68k/immap_5253.h
+++ b/include/asm-m68k/immap_5253.h
@@ -37,6 +37,7 @@
#define MMAP_CAN0 (CONFIG_SYS_MBAR + 0x00010000)
#define MMAP_CAN1 (CONFIG_SYS_MBAR + 0x00011000)
+#define MMAP_PAR (CONFIG_SYS_MBAR2 + 0x0000019C)
#define MMAP_I2C1 (CONFIG_SYS_MBAR2 + 0x00000440)
#define MMAP_UART2 (CONFIG_SYS_MBAR2 + 0x00000C00)
diff --git a/include/asm-m68k/m520x.h b/include/asm-m68k/m520x.h
index 267bfd9..71f147e 100644
--- a/include/asm-m68k/m520x.h
+++ b/include/asm-m68k/m520x.h
@@ -70,7 +70,6 @@
#define PACR_TP 1
#define SCM_BMT_BME (0x00000008)
-#define SCM_BMT_BMT_MASK (0x07)
#define SCM_BMT_BMT(x) ((x) & 0x07)
#define SCM_BMT_BMT1024 (0x0000)
#define SCM_BMT_BMT512 (0x0001)
@@ -179,7 +178,7 @@
#define CCM_CCR_PLL_MODE (0x0002)
#define CCM_CCR_RESERVED (0x0001)
-#define CCM_CIR_PIN(x) (((x) & 0x03FF) << 6)
+#define CCM_CIR_PIN(x) (((x) & 0xFFC0) >> 6)
#define CCM_CIR_PRN(x) ((x) & 0x003F)
/* *** General Purpose I/O (GPIO) *** */
@@ -196,7 +195,7 @@
#define GPIO_PAR_FBCTL_OE (0x10)
#define GPIO_PAR_FBCTL_TA (0x08)
#define GPIO_PAR_FBCTL_RWB (0x04)
-#define GPIO_PAR_FBCTL_TS_MASK (0xFC)
+#define GPIO_PAR_FBCTL_TS_UNMASK (0xFC)
#define GPIO_PAR_FBCTL_TS_TS (0x03)
#define GPIO_PAR_FBCTL_TS_DMA (0x02)
@@ -207,39 +206,39 @@
#define GPIO_PAR_CS3 (0x08)
#define GPIO_PAR_CS2 (0x04)
-#define GPIO_PAR_CS1_MASK (0xFC)
+#define GPIO_PAR_CS1_UNMASK (0xFC)
#define GPIO_PAR_CS1_CS1 (0x03)
#define GPIO_PAR_CS1_SDCS1 (0x02)
-#define GPIO_PAR_FECI2C_RMII_MASK (0x0F)
-#define GPIO_PAR_FECI2C_MDC_MASK (0x3F)
+#define GPIO_PAR_FECI2C_RMII_UNMASK (0x0F)
+#define GPIO_PAR_FECI2C_MDC_UNMASK (0x3F)
#define GPIO_PAR_FECI2C_MDC_MDC (0xC0)
#define GPIO_PAR_FECI2C_MDC_SCL (0x80)
#define GPIO_PAR_FECI2C_MDC_U2TXD (0x40)
-#define GPIO_PAR_FECI2C_MDIO_MASK (0xCF)
+#define GPIO_PAR_FECI2C_MDIO_UNMASK (0xCF)
#define GPIO_PAR_FECI2C_MDIO_MDIO (0x30)
#define GPIO_PAR_FECI2C_MDIO_SDA (0x20)
#define GPIO_PAR_FECI2C_MDIO_U2RXD (0x10)
-#define GPIO_PAR_FECI2C_I2C_MASK (0xF0)
-#define GPIO_PAR_FECI2C_SCL_MASK (0xF3)
+#define GPIO_PAR_FECI2C_I2C_UNMASK (0xF0)
+#define GPIO_PAR_FECI2C_SCL_UNMASK (0xF3)
#define GPIO_PAR_FECI2C_SCL_SCL (0x0C)
#define GPIO_PAR_FECI2C_SCL_U2RXD (0x04)
-#define GPIO_PAR_FECI2C_SDA_MASK (0xFC)
+#define GPIO_PAR_FECI2C_SDA_UNMASK (0xFC)
#define GPIO_PAR_FECI2C_SDA_SDA (0x03)
#define GPIO_PAR_FECI2C_SDA_U2TXD (0x01)
-#define GPIO_PAR_QSPI_PCS2_MASK (0x3F)
+#define GPIO_PAR_QSPI_PCS2_UNMASK (0x3F)
#define GPIO_PAR_QSPI_PCS2_PCS2 (0xC0)
#define GPIO_PAR_QSPI_PCS2_DACK0 (0x80)
#define GPIO_PAR_QSPI_PCS2_U2RTS (0x40)
-#define GPIO_PAR_QSPI_DIN_MASK (0xCF)
+#define GPIO_PAR_QSPI_DIN_UNMASK (0xCF)
#define GPIO_PAR_QSPI_DIN_DIN (0x30)
#define GPIO_PAR_QSPI_DIN_DREQ0 (0x20)
#define GPIO_PAR_QSPI_DIN_U2CTS (0x10)
-#define GPIO_PAR_QSPI_DOUT_MASK (0xF3)
+#define GPIO_PAR_QSPI_DOUT_UNMASK (0xF3)
#define GPIO_PAR_QSPI_DOUT_DOUT (0x0C)
#define GPIO_PAR_QSPI_DOUT_SDA (0x08)
-#define GPIO_PAR_QSPI_SCK_MASK (0xFC)
+#define GPIO_PAR_QSPI_SCK_UNMASK (0xFC)
#define GPIO_PAR_QSPI_SCK_SCK (0x03)
#define GPIO_PAR_QSPI_SCK_SCL (0x02)
@@ -247,50 +246,50 @@
#define GPIO_PAR_TMR_TIN2(x) (((x) & 0x03) << 4)
#define GPIO_PAR_TMR_TIN1(x) (((x) & 0x03) << 2)
#define GPIO_PAR_TMR_TIN0(x) ((x) & 0x03)
-#define GPIO_PAR_TMR_TIN3_MASK (0x3F)
+#define GPIO_PAR_TMR_TIN3_UNMASK (0x3F)
#define GPIO_PAR_TMR_TIN3_TIN3 (0xC0)
#define GPIO_PAR_TMR_TIN3_TOUT3 (0x80)
#define GPIO_PAR_TMR_TIN3_U2CTS (0x40)
-#define GPIO_PAR_TMR_TIN2_MASK (0xCF)
+#define GPIO_PAR_TMR_TIN2_UNMASK (0xCF)
#define GPIO_PAR_TMR_TIN2_TIN2 (0x30)
#define GPIO_PAR_TMR_TIN2_TOUT2 (0x20)
#define GPIO_PAR_TMR_TIN2_U2RTS (0x10)
-#define GPIO_PAR_TMR_TIN1_MASK (0xF3)
+#define GPIO_PAR_TMR_TIN1_UNMASK (0xF3)
#define GPIO_PAR_TMR_TIN1_TIN1 (0x0C)
#define GPIO_PAR_TMR_TIN1_TOUT1 (0x08)
#define GPIO_PAR_TMR_TIN1_U2RXD (0x04)
-#define GPIO_PAR_TMR_TIN0_MASK (0xFC)
+#define GPIO_PAR_TMR_TIN0_UNMASK (0xFC)
#define GPIO_PAR_TMR_TIN0_TIN0 (0x03)
#define GPIO_PAR_TMR_TIN0_TOUT0 (0x02)
#define GPIO_PAR_TMR_TIN0_U2TXD (0x01)
-#define GPIO_PAR_UART1_MASK (0xF03F)
-#define GPIO_PAR_UART0_MASK (0xFFC0)
-#define GPIO_PAR_UART_U1CTS_MASK (0xF3FF)
+#define GPIO_PAR_UART1_UNMASK (0xF03F)
+#define GPIO_PAR_UART0_UNMASK (0xFFC0)
+#define GPIO_PAR_UART_U1CTS_UNMASK (0xF3FF)
#define GPIO_PAR_UART_U1CTS_U1CTS (0x0C00)
#define GPIO_PAR_UART_U1CTS_TIN1 (0x0800)
#define GPIO_PAR_UART_U1CTS_PCS1 (0x0400)
-#define GPIO_PAR_UART_U1RTS_MASK (0xFCFF)
+#define GPIO_PAR_UART_U1RTS_UNMASK (0xFCFF)
#define GPIO_PAR_UART_U1RTS_U1RTS (0x0300)
#define GPIO_PAR_UART_U1RTS_TOUT1 (0x0200)
#define GPIO_PAR_UART_U1RTS_PCS1 (0x0100)
#define GPIO_PAR_UART_U1TXD (0x0080)
#define GPIO_PAR_UART_U1RXD (0x0040)
-#define GPIO_PAR_UART_U0CTS_MASK (0xFFCF)
+#define GPIO_PAR_UART_U0CTS_UNMASK (0xFFCF)
#define GPIO_PAR_UART_U0CTS_U0CTS (0x0030)
#define GPIO_PAR_UART_U0CTS_TIN0 (0x0020)
#define GPIO_PAR_UART_U0CTS_PCS0 (0x0010)
-#define GPIO_PAR_UART_U0RTS_MASK (0xFFF3)
+#define GPIO_PAR_UART_U0RTS_UNMASK (0xFFF3)
#define GPIO_PAR_UART_U0RTS_U0RTS (0x000C)
#define GPIO_PAR_UART_U0RTS_TOUT0 (0x0008)
#define GPIO_PAR_UART_U0RTS_PCS0 (0x0004)
#define GPIO_PAR_UART_U0TXD (0x0002)
#define GPIO_PAR_UART_U0RXD (0x0001)
-#define GPIO_PAR_FEC_7W_MASK (0xF3)
+#define GPIO_PAR_FEC_7W_UNMASK (0xF3)
#define GPIO_PAR_FEC_7W_FEC (0x0C)
#define GPIO_PAR_FEC_7W_U1RTS (0x04)
-#define GPIO_PAR_FEC_MII_MASK (0xFC)
+#define GPIO_PAR_FEC_MII_UNMASK (0xFC)
#define GPIO_PAR_FEC_MII_FEC (0x03)
#define GPIO_PAR_FEC_MII_UnCTS (0x01)
@@ -300,17 +299,17 @@
#define GPIO_MSCR_FB_DUP(x) (((x) & 0x03) << 4)
#define GPIO_MSCR_FB_DLO(x) (((x) & 0x03) << 2)
#define GPIO_MSCR_FB_ADRCTL(x) ((x) & 0x03)
-#define GPIO_MSCR_FB_FBCLK_MASK (0x3F)
-#define GPIO_MSCR_FB_DUP_MASK (0xCF)
-#define GPIO_MSCR_FB_DLO_MASK (0xF3)
-#define GPIO_MSCR_FB_ADRCTL_MASK (0xFC)
+#define GPIO_MSCR_FB_FBCLK_UNMASK (0x3F)
+#define GPIO_MSCR_FB_DUP_UNMASK (0xCF)
+#define GPIO_MSCR_FB_DLO_UNMASK (0xF3)
+#define GPIO_MSCR_FB_ADRCTL_UNMASK (0xFC)
#define GPIO_MSCR_SDR_SDCLKB(x) (((x) & 0x03) << 4)
#define GPIO_MSCR_SDR_SDCLK(x) (((x) & 0x03) << 2)
#define GPIO_MSCR_SDR_SDRAM(x) ((x) & 0x03)
-#define GPIO_MSCR_SDR_SDCLKB_MASK (0xCF)
-#define GPIO_MSCR_SDR_SDCLK_MASK (0xF3)
-#define GPIO_MSCR_SDR_SDRAM_MASK (0xFC)
+#define GPIO_MSCR_SDR_SDCLKB_UNMASK (0xCF)
+#define GPIO_MSCR_SDR_SDCLK_UNMASK (0xF3)
+#define GPIO_MSCR_SDR_SDRAM_UNMASK (0xFC)
#define MSCR_25VDDR (0x03)
#define MSCR_18VDDR_FULL (0x02)
@@ -318,27 +317,27 @@
#define MSCR_18VDDR_HALF (0x00)
#define GPIO_DSCR_I2C(x) ((x) & 0x03)
-#define GPIO_DSCR_I2C_MASK (0xFC)
+#define GPIO_DSCR_I2C_UNMASK (0xFC)
#define GPIO_DSCR_MISC_DBG(x) (((x) & 0x03) << 4)
-#define GPIO_DSCR_MISC_DBG_MASK (0xCF)
+#define GPIO_DSCR_MISC_DBG_UNMASK (0xCF)
#define GPIO_DSCR_MISC_RSTOUT(x) (((x) & 0x03) << 2)
-#define GPIO_DSCR_MISC_RSTOUT_MASK (0xF3)
+#define GPIO_DSCR_MISC_RSTOUT_UNMASK (0xF3)
#define GPIO_DSCR_MISC_TIMER(x) ((x) & 0x03)
-#define GPIO_DSCR_MISC_TIMER_MASK (0xFC)
+#define GPIO_DSCR_MISC_TIMER_UNMASK (0xFC)
#define GPIO_DSCR_FEC(x) ((x) & 0x03)
-#define GPIO_DSCR_FEC_MASK (0xFC)
+#define GPIO_DSCR_FEC_UNMASK (0xFC)
#define GPIO_DSCR_UART_UART1(x) (((x) & 0x03) << 4)
-#define GPIO_DSCR_UART_UART1_MASK (0xCF)
+#define GPIO_DSCR_UART_UART1_UNMASK (0xCF)
#define GPIO_DSCR_UART_UART0(x) (((x) & 0x03) << 2)
-#define GPIO_DSCR_UART_UART0_MASK (0xF3)
+#define GPIO_DSCR_UART_UART0_UNMASK (0xF3)
#define GPIO_DSCR_UART_IRQ(x) ((x) & 0x03)
-#define GPIO_DSCR_UART_IRQ_MASK (0xFC)
+#define GPIO_DSCR_UART_IRQ_UNMASK (0xFC)
#define GPIO_DSCR_QSPI(x) ((x) & 0x03)
-#define GPIO_DSCR_QSPI_MASK (0xFC)
+#define GPIO_DSCR_QSPI_UNMASK (0xFC)
#define DSCR_50PF (0x03)
#define DSCR_30PF (0x02)
@@ -347,12 +346,12 @@
/* *** Phase Locked Loop (PLL) *** */
#define PLL_PODR_CPUDIV(x) (((x) & 0x0F) << 4)
-#define PLL_PODR_CPUDIV_MASK (0x0F)
+#define PLL_PODR_CPUDIV_UNMASK (0x0F)
#define PLL_PODR_BUSDIV(x) ((x) & 0x0F)
-#define PLL_PODR_BUSDIV_MASK (0xF0)
+#define PLL_PODR_BUSDIV_UNMASK (0xF0)
#define PLL_PCR_DITHEN (0x80)
#define PLL_PCR_DITHDEV(x) ((x) & 0x07)
-#define PLL_PCR_DITHDEV_MASK (0xF8)
+#define PLL_PCR_DITHDEV_UNMASK (0xF8)
#endif /* __M520X__ */
diff --git a/include/asm-m68k/m5227x.h b/include/asm-m68k/m5227x.h
index 824d333..c77d5dd 100644
--- a/include/asm-m68k/m5227x.h
+++ b/include/asm-m68k/m5227x.h
@@ -117,36 +117,34 @@
/* Bit definitions and macros for CCR */
#define CCM_CCR_DRAMSEL (0x0100)
-#define CCM_CCR_CSC_MASK (0xFF3F)
+#define CCM_CCR_CSC_UNMASK (0xFF3F)
#define CCM_CCR_CSC_FBCS5_CS4 (0x00C0)
#define CCM_CCR_CSC_FBCS5_A22 (0x0080)
#define CCM_CCR_CSC_FB_A23_A22 (0x0040)
#define CCM_CCR_LIMP (0x0020)
#define CCM_CCR_LOAD (0x0010)
-#define CCM_CCR_BOOTPS_MASK (0xFFF3)
+#define CCM_CCR_BOOTPS_UNMASK (0xFFF3)
#define CCM_CCR_BOOTPS_PS16 (0x0008)
#define CCM_CCR_BOOTPS_PS8 (0x0004)
#define CCM_CCR_BOOTPS_PS32 (0x0000)
#define CCM_CCR_OSCMODE_OSCBYPASS (0x0002)
/* Bit definitions and macros for RCON */
-#define CCM_RCON_CSC_MASK (0xFF3F)
+#define CCM_RCON_CSC_UNMASK (0xFF3F)
#define CCM_RCON_CSC_FBCS5_CS4 (0x00C0)
#define CCM_RCON_CSC_FBCS5_A22 (0x0080)
#define CCM_RCON_CSC_FB_A23_A22 (0x0040)
#define CCM_RCON_LIMP (0x0020)
#define CCM_RCON_LOAD (0x0010)
-#define CCM_RCON_BOOTPS_MASK (0xFFF3)
+#define CCM_RCON_BOOTPS_UNMASK (0xFFF3)
#define CCM_RCON_BOOTPS_PS16 (0x0008)
#define CCM_RCON_BOOTPS_PS8 (0x0004)
#define CCM_RCON_BOOTPS_PS32 (0x0000)
#define CCM_RCON_OSCMODE_OSCBYPASS (0x0002)
/* Bit definitions and macros for CIR */
-#define CCM_CIR_PRN(x) (((x)&0x003F)) /* Part revision number */
-#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) /* Part identification number */
-#define CCM_CIR_PIN_MASK (0xFFC0)
-#define CCM_CIR_PRN_MASK (0x003F)
+#define CCM_CIR_PIN(x) (((x) & 0xFFC0) >> 6)
+#define CCM_CIR_PRN(x) ((x) & 0x003F)
#define CCM_CIR_PIN_MCF52277 (0x0000)
/* Bit definitions and macros for MISCCR */
@@ -195,7 +193,7 @@
* General Purpose I/O Module (GPIO)
*********************************************************************/
/* Bit definitions and macros for PAR_BE */
-#define GPIO_PAR_BE_MASK (0x0F)
+#define GPIO_PAR_BE_UNMASK (0x0F)
#define GPIO_PAR_BE_BE3_BE3 (0x08)
#define GPIO_PAR_BE_BE3_GPIO (0x00)
#define GPIO_PAR_BE_BE2_BE2 (0x04)
@@ -217,111 +215,111 @@
#define GPIO_PAR_FBCTL_OE (0x80)
#define GPIO_PAR_FBCTL_TA (0x40)
#define GPIO_PAR_FBCTL_RW (0x20)
-#define GPIO_PAR_FBCTL_TS_MASK (0xE7)
+#define GPIO_PAR_FBCTL_TS_UNMASK (0xE7)
#define GPIO_PAR_FBCTL_TS_FBTS (0x18)
#define GPIO_PAR_FBCTL_TS_DMAACK (0x10)
#define GPIO_PAR_FBCTL_TS_GPIO (0x00)
/* Bit definitions and macros for PAR_FECI2C */
-#define GPIO_PAR_I2C_SCL_MASK (0xF3)
+#define GPIO_PAR_I2C_SCL_UNMASK (0xF3)
#define GPIO_PAR_I2C_SCL_SCL (0x0C)
#define GPIO_PAR_I2C_SCL_CANTXD (0x08)
#define GPIO_PAR_I2C_SCL_U2TXD (0x04)
#define GPIO_PAR_I2C_SCL_GPIO (0x00)
-#define GPIO_PAR_I2C_SDA_MASK (0xFC)
+#define GPIO_PAR_I2C_SDA_UNMASK (0xFC)
#define GPIO_PAR_I2C_SDA_SDA (0x03)
#define GPIO_PAR_I2C_SDA_CANRXD (0x02)
#define GPIO_PAR_I2C_SDA_U2RXD (0x01)
#define GPIO_PAR_I2C_SDA_GPIO (0x00)
/* Bit definitions and macros for PAR_UART */
-#define GPIO_PAR_UART_U1CTS_MASK (0x3FFF)
+#define GPIO_PAR_UART_U1CTS_UNMASK (0x3FFF)
#define GPIO_PAR_UART_U1CTS_U1CTS (0xC000)
#define GPIO_PAR_UART_U1CTS_SSIBCLK (0x8000)
#define GPIO_PAR_UART_U1CTS_LCDCLS (0x4000)
#define GPIO_PAR_UART_U1CTS_GPIO (0x0000)
-#define GPIO_PAR_UART_U1RTS_MASK (0xCFFF)
+#define GPIO_PAR_UART_U1RTS_UNMASK (0xCFFF)
#define GPIO_PAR_UART_U1RTS_U1RTS (0x3000)
#define GPIO_PAR_UART_U1RTS_SSIFS (0x2000)
#define GPIO_PAR_UART_U1RTS_LCDPS (0x1000)
#define GPIO_PAR_UART_U1RTS_GPIO (0x0000)
-#define GPIO_PAR_UART_U1RXD_MASK (0xF3FF)
+#define GPIO_PAR_UART_U1RXD_UNMASK (0xF3FF)
#define GPIO_PAR_UART_U1RXD_U1RXD (0x0C00)
#define GPIO_PAR_UART_U1RXD_SSIRXD (0x0800)
#define GPIO_PAR_UART_U1RXD_GPIO (0x0000)
-#define GPIO_PAR_UART_U1TXD_MASK (0xFCFF)
+#define GPIO_PAR_UART_U1TXD_UNMASK (0xFCFF)
#define GPIO_PAR_UART_U1TXD_U1TXD (0x0300)
#define GPIO_PAR_UART_U1TXD_SSITXD (0x0200)
#define GPIO_PAR_UART_U1TXD_GPIO (0x0000)
-#define GPIO_PAR_UART_U0CTS_MASK (0xFF3F)
+#define GPIO_PAR_UART_U0CTS_UNMASK (0xFF3F)
#define GPIO_PAR_UART_U0CTS_U0CTS (0x00C0)
#define GPIO_PAR_UART_U0CTS_T1OUT (0x0080)
#define GPIO_PAR_UART_U0CTS_USBVBUSEN (0x0040)
#define GPIO_PAR_UART_U0CTS_GPIO (0x0000)
-#define GPIO_PAR_UART_U0RTS_MASK (0xFFCF)
+#define GPIO_PAR_UART_U0RTS_UNMASK (0xFFCF)
#define GPIO_PAR_UART_U0RTS_U0RTS (0x0030)
#define GPIO_PAR_UART_U0RTS_T1IN (0x0020)
#define GPIO_PAR_UART_U0RTS_USBVBUSOC (0x0010)
#define GPIO_PAR_UART_U0RTS_GPIO (0x0000)
-#define GPIO_PAR_UART_U0RXD_MASK (0xFFF3)
+#define GPIO_PAR_UART_U0RXD_UNMASK (0xFFF3)
#define GPIO_PAR_UART_U0RXD_U0RXD (0x000C)
#define GPIO_PAR_UART_U0RXD_CANRX (0x0008)
#define GPIO_PAR_UART_U0RXD_GPIO (0x0000)
-#define GPIO_PAR_UART_U0TXD_MASK (0xFFFC)
+#define GPIO_PAR_UART_U0TXD_UNMASK (0xFFFC)
#define GPIO_PAR_UART_U0TXD_U0TXD (0x0003)
#define GPIO_PAR_UART_U0TXD_CANTX (0x0002)
#define GPIO_PAR_UART_U0TXD_GPIO (0x0000)
/* Bit definitions and macros for PAR_DSPI */
-#define GPIO_PAR_DSPI_PCS0_MASK (0x3F)
+#define GPIO_PAR_DSPI_PCS0_UNMASK (0x3F)
#define GPIO_PAR_DSPI_PCS0_PCS0 (0xC0)
#define GPIO_PAR_DSPI_PCS0_U2RTS (0x80)
#define GPIO_PAR_DSPI_PCS0_GPIO (0x00)
-#define GPIO_PAR_DSPI_SIN_MASK (0xCF)
+#define GPIO_PAR_DSPI_SIN_UNMASK (0xCF)
#define GPIO_PAR_DSPI_SIN_SIN (0x30)
#define GPIO_PAR_DSPI_SIN_U2RXD (0x20)
#define GPIO_PAR_DSPI_SIN_GPIO (0x00)
-#define GPIO_PAR_DSPI_SOUT_MASK (0xF3)
+#define GPIO_PAR_DSPI_SOUT_UNMASK (0xF3)
#define GPIO_PAR_DSPI_SOUT_SOUT (0x0C)
#define GPIO_PAR_DSPI_SOUT_U2TXD (0x08)
#define GPIO_PAR_DSPI_SOUT_GPIO (0x00)
-#define GPIO_PAR_DSPI_SCK_MASK (0xFC)
+#define GPIO_PAR_DSPI_SCK_UNMASK (0xFC)
#define GPIO_PAR_DSPI_SCK_SCK (0x03)
#define GPIO_PAR_DSPI_SCK_U2CTS (0x02)
#define GPIO_PAR_DSPI_SCK_GPIO (0x00)
/* Bit definitions and macros for PAR_TIMER */
-#define GPIO_PAR_TIMER_T3IN_MASK (0x3F)
+#define GPIO_PAR_TIMER_T3IN_UNMASK (0x3F)
#define GPIO_PAR_TIMER_T3IN_T3IN (0xC0)
#define GPIO_PAR_TIMER_T3IN_T3OUT (0x80)
#define GPIO_PAR_TIMER_T3IN_SSIMCLK (0x40)
#define GPIO_PAR_TIMER_T3IN_GPIO (0x00)
-#define GPIO_PAR_TIMER_T2IN_MASK (0xCF)
+#define GPIO_PAR_TIMER_T2IN_UNMASK (0xCF)
#define GPIO_PAR_TIMER_T2IN_T2IN (0x30)
#define GPIO_PAR_TIMER_T2IN_T2OUT (0x20)
#define GPIO_PAR_TIMER_T2IN_DSPIPCS2 (0x10)
#define GPIO_PAR_TIMER_T2IN_GPIO (0x00)
-#define GPIO_PAR_TIMER_T1IN_MASK (0xF3)
+#define GPIO_PAR_TIMER_T1IN_UNMASK (0xF3)
#define GPIO_PAR_TIMER_T1IN_T1IN (0x0C)
#define GPIO_PAR_TIMER_T1IN_T1OUT (0x08)
#define GPIO_PAR_TIMER_T1IN_LCDCONTRAST (0x04)
#define GPIO_PAR_TIMER_T1IN_GPIO (0x00)
-#define GPIO_PAR_TIMER_T0IN_MASK (0xFC)
+#define GPIO_PAR_TIMER_T0IN_UNMASK (0xFC)
#define GPIO_PAR_TIMER_T0IN_T0IN (0x03)
#define GPIO_PAR_TIMER_T0IN_T0OUT (0x02)
#define GPIO_PAR_TIMER_T0IN_LCDREV (0x01)
#define GPIO_PAR_TIMER_T0IN_GPIO (0x00)
/* Bit definitions and macros for GPIO_PAR_LCDCTL */
-#define GPIO_PAR_LCDCTL_ACDOE_MASK (0xE7)
+#define GPIO_PAR_LCDCTL_ACDOE_UNMASK (0xE7)
#define GPIO_PAR_LCDCTL_ACDOE_ACDOE (0x18)
#define GPIO_PAR_LCDCTL_ACDOE_SPLSPR (0x10)
#define GPIO_PAR_LCDCTL_ACDOE_GPIO (0x00)
@@ -330,141 +328,141 @@
#define GPIO_PAR_LCDCTL_LSCLK (0x01)
/* Bit definitions and macros for PAR_IRQ */
-#define GPIO_PAR_IRQ_IRQ4_MASK (0xF3)
+#define GPIO_PAR_IRQ_IRQ4_UNMASK (0xF3)
#define GPIO_PAR_IRQ_IRQ4_SSIINPCLK (0x0C)
#define GPIO_PAR_IRQ_IRQ4_DMAREQ0 (0x08)
#define GPIO_PAR_IRQ_IRQ4_GPIO (0x00)
-#define GPIO_PAR_IRQ_IRQ1_MASK (0xFC)
+#define GPIO_PAR_IRQ_IRQ1_UNMASK (0xFC)
#define GPIO_PAR_IRQ_IRQ1_PCIINT (0x03)
#define GPIO_PAR_IRQ_IRQ1_USBCLKIN (0x02)
#define GPIO_PAR_IRQ_IRQ1_SSICLKIN (0x01)
#define GPIO_PAR_IRQ_IRQ1_GPIO (0x00)
/* Bit definitions and macros for GPIO_PAR_LCDH */
-#define GPIO_PAR_LCDH_LD17_MASK (0xFFFFF3FF)
+#define GPIO_PAR_LCDH_LD17_UNMASK (0xFFFFF3FF)
#define GPIO_PAR_LCDH_LD17_LD17 (0x00000C00)
#define GPIO_PAR_LCDH_LD17_LD11 (0x00000800)
#define GPIO_PAR_LCDH_LD17_GPIO (0x00000000)
-#define GPIO_PAR_LCDH_LD16_MASK (0xFFFFFCFF)
+#define GPIO_PAR_LCDH_LD16_UNMASK (0xFFFFFCFF)
#define GPIO_PAR_LCDH_LD16_LD16 (0x00000300)
#define GPIO_PAR_LCDH_LD16_LD10 (0x00000200)
#define GPIO_PAR_LCDH_LD16_GPIO (0x00000000)
-#define GPIO_PAR_LCDH_LD15_MASK (0xFFFFFF3F)
+#define GPIO_PAR_LCDH_LD15_UNMASK (0xFFFFFF3F)
#define GPIO_PAR_LCDH_LD15_LD15 (0x000000C0)
#define GPIO_PAR_LCDH_LD15_LD9 (0x00000080)
#define GPIO_PAR_LCDH_LD15_GPIO (0x00000000)
-#define GPIO_PAR_LCDH_LD14_MASK (0xFFFFFFCF)
+#define GPIO_PAR_LCDH_LD14_UNMASK (0xFFFFFFCF)
#define GPIO_PAR_LCDH_LD14_LD14 (0x00000030)
#define GPIO_PAR_LCDH_LD14_LD8 (0x00000020)
#define GPIO_PAR_LCDH_LD14_GPIO (0x00000000)
-#define GPIO_PAR_LCDH_LD13_MASK (0xFFFFFFF3)
+#define GPIO_PAR_LCDH_LD13_UNMASK (0xFFFFFFF3)
#define GPIO_PAR_LCDH_LD13_LD13 (0x0000000C)
#define GPIO_PAR_LCDH_LD13_CANTX (0x00000008)
#define GPIO_PAR_LCDH_LD13_GPIO (0x00000000)
-#define GPIO_PAR_LCDH_LD12_MASK (0xFFFFFFFC)
+#define GPIO_PAR_LCDH_LD12_UNMASK (0xFFFFFFFC)
#define GPIO_PAR_LCDH_LD12_LD12 (0x00000003)
#define GPIO_PAR_LCDH_LD12_CANRX (0x00000002)
#define GPIO_PAR_LCDH_LD12_GPIO (0x00000000)
/* Bit definitions and macros for GPIO_PAR_LCDL */
-#define GPIO_PAR_LCDL_LD11_MASK (0x3FFFFFFF)
+#define GPIO_PAR_LCDL_LD11_UNMASK (0x3FFFFFFF)
#define GPIO_PAR_LCDL_LD11_LD11 (0xC0000000)
#define GPIO_PAR_LCDL_LD11_LD7 (0x80000000)
#define GPIO_PAR_LCDL_LD11_GPIO (0x00000000)
-#define GPIO_PAR_LCDL_LD10_MASK (0xCFFFFFFF)
+#define GPIO_PAR_LCDL_LD10_UNMASK (0xCFFFFFFF)
#define GPIO_PAR_LCDL_LD10_LD10 (0x30000000)
#define GPIO_PAR_LCDL_LD10_LD6 (0x20000000)
#define GPIO_PAR_LCDL_LD10_GPIO (0x00000000)
-#define GPIO_PAR_LCDL_LD9_MASK (0xF3FFFFFF)
+#define GPIO_PAR_LCDL_LD9_UNMASK (0xF3FFFFFF)
#define GPIO_PAR_LCDL_LD9_LD9 (0x0C000000)
#define GPIO_PAR_LCDL_LD9_LD5 (0x08000000)
#define GPIO_PAR_LCDL_LD9_GPIO (0x00000000)
-#define GPIO_PAR_LCDL_LD8_MASK (0xFCFFFFFF)
+#define GPIO_PAR_LCDL_LD8_UNMASK (0xFCFFFFFF)
#define GPIO_PAR_LCDL_LD8_LD8 (0x03000000)
#define GPIO_PAR_LCDL_LD8_LD4 (0x02000000)
#define GPIO_PAR_LCDL_LD8_GPIO (0x00000000)
-#define GPIO_PAR_LCDL_LD7_MASK (0xFF3FFFFF)
+#define GPIO_PAR_LCDL_LD7_UNMASK (0xFF3FFFFF)
#define GPIO_PAR_LCDL_LD7_LD7 (0x00C00000)
#define GPIO_PAR_LCDL_LD7_PWM7 (0x00800000)
#define GPIO_PAR_LCDL_LD7_GPIO (0x00000000)
-#define GPIO_PAR_LCDL_LD6_MASK (0xFFCFFFFF)
+#define GPIO_PAR_LCDL_LD6_UNMASK (0xFFCFFFFF)
#define GPIO_PAR_LCDL_LD6_LD6 (0x00300000)
#define GPIO_PAR_LCDL_LD6_PWM5 (0x00200000)
#define GPIO_PAR_LCDL_LD6_GPIO (0x00000000)
-#define GPIO_PAR_LCDL_LD5_MASK (0xFFF3FFFF)
+#define GPIO_PAR_LCDL_LD5_UNMASK (0xFFF3FFFF)
#define GPIO_PAR_LCDL_LD5_LD5 (0x000C0000)
#define GPIO_PAR_LCDL_LD5_LD3 (0x00080000)
#define GPIO_PAR_LCDL_LD5_GPIO (0x00000000)
-#define GPIO_PAR_LCDL_LD4_MASK (0xFFFCFFFF)
+#define GPIO_PAR_LCDL_LD4_UNMASK (0xFFFCFFFF)
#define GPIO_PAR_LCDL_LD4_LD4 (0x00030000)
#define GPIO_PAR_LCDL_LD4_LD2 (0x00020000)
#define GPIO_PAR_LCDL_LD4_GPIO (0x00000000)
-#define GPIO_PAR_LCDL_LD3_MASK (0xFFFF3FFF)
+#define GPIO_PAR_LCDL_LD3_UNMASK (0xFFFF3FFF)
#define GPIO_PAR_LCDL_LD3_LD3 (0x0000C000)
#define GPIO_PAR_LCDL_LD3_LD1 (0x00008000)
#define GPIO_PAR_LCDL_LD3_GPIO (0x00000000)
-#define GPIO_PAR_LCDL_LD2_MASK (0xFFFFCFFF)
+#define GPIO_PAR_LCDL_LD2_UNMASK (0xFFFFCFFF)
#define GPIO_PAR_LCDL_LD2_LD2 (0x00003000)
#define GPIO_PAR_LCDL_LD2_LD0 (0x00002000)
#define GPIO_PAR_LCDL_LD2_GPIO (0x00000000)
-#define GPIO_PAR_LCDL_LD1_MASK (0xFFFFF3FF)
+#define GPIO_PAR_LCDL_LD1_UNMASK (0xFFFFF3FF)
#define GPIO_PAR_LCDL_LD1_LD1 (0x00000C00)
#define GPIO_PAR_LCDL_LD1_PWM3 (0x00000800)
#define GPIO_PAR_LCDL_LD1_GPIO (0x00000000)
-#define GPIO_PAR_LCDL_LD0_MASK (0xFFFFFCFF)
+#define GPIO_PAR_LCDL_LD0_UNMASK (0xFFFFFCFF)
#define GPIO_PAR_LCDL_LD0_LD0 (0x00000300)
#define GPIO_PAR_LCDL_LD0_PWM1 (0x00000200)
#define GPIO_PAR_LCDL_LD0_GPIO (0x00000000)
/* Bit definitions and macros for MSCR_FB */
-#define GPIO_MSCR_FB_DUPPER_MASK (0xCF)
+#define GPIO_MSCR_FB_DUPPER_UNMASK (0xCF)
#define GPIO_MSCR_FB_DUPPER_25V_33V (0x30)
#define GPIO_MSCR_FB_DUPPER_FULL_18V (0x20)
#define GPIO_MSCR_FB_DUPPER_OD (0x10)
#define GPIO_MSCR_FB_DUPPER_HALF_18V (0x00)
-#define GPIO_MSCR_FB_DLOWER_MASK (0xF3)
+#define GPIO_MSCR_FB_DLOWER_UNMASK (0xF3)
#define GPIO_MSCR_FB_DLOWER_25V_33V (0x0C)
#define GPIO_MSCR_FB_DLOWER_FULL_18V (0x08)
#define GPIO_MSCR_FB_DLOWER_OD (0x04)
#define GPIO_MSCR_FB_DLOWER_HALF_18V (0x00)
-#define GPIO_MSCR_FB_ADDRCTL_MASK (0xFC)
+#define GPIO_MSCR_FB_ADDRCTL_UNMASK (0xFC)
#define GPIO_MSCR_FB_ADDRCTL_25V_33V (0x03)
#define GPIO_MSCR_FB_ADDRCTL_FULL_18V (0x02)
#define GPIO_MSCR_FB_ADDRCTL_OD (0x01)
#define GPIO_MSCR_FB_ADDRCTL_HALF_18V (0x00)
/* Bit definitions and macros for MSCR_SDRAM */
-#define GPIO_MSCR_SDRAM_SDCLKB_MASK (0xCF)
+#define GPIO_MSCR_SDRAM_SDCLKB_UNMASK (0xCF)
#define GPIO_MSCR_SDRAM_SDCLKB_25V_33V (0x30)
#define GPIO_MSCR_SDRAM_SDCLKB_FULL_18V (0x20)
#define GPIO_MSCR_SDRAM_SDCLKB_OD (0x10)
#define GPIO_MSCR_SDRAM_SDCLKB_HALF_18V (0x00)
-#define GPIO_MSCR_SDRAM_SDCLK_MASK (0xF3)
+#define GPIO_MSCR_SDRAM_SDCLK_UNMASK (0xF3)
#define GPIO_MSCR_SDRAM_SDCLK_25V_33V (0x0C)
#define GPIO_MSCR_SDRAM_SDCLK_FULL_18V (0x08)
#define GPIO_MSCR_SDRAM_SDCLK_OPD (0x04)
#define GPIO_MSCR_SDRAM_SDCLK_HALF_18V (0x00)
-#define GPIO_MSCR_SDRAM_SDCTL_MASK (0xFC)
+#define GPIO_MSCR_SDRAM_SDCTL_UNMASK (0xFC)
#define GPIO_MSCR_SDRAM_SDCTL_25V_33V (0x03)
#define GPIO_MSCR_SDRAM_SDCTL_FULL_18V (0x02)
#define GPIO_MSCR_SDRAM_SDCTL_OPD (0x01)
diff --git a/include/asm-m68k/m5235.h b/include/asm-m68k/m5235.h
index 22987ac..71a40d3 100644
--- a/include/asm-m68k/m5235.h
+++ b/include/asm-m68k/m5235.h
@@ -557,8 +557,8 @@
#define CCM_RCON_MODE (0x0001)
/* Bit definitions and macros for CCM_CIR */
-#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6)
-#define CCM_CIR_PRN(x) ((x)&0x003F)
+#define CCM_CIR_PIN(x) (((x) & 0xFFC0) >> 6)
+#define CCM_CIR_PRN(x) ((x) & 0x003F)
/*********************************************************************
* PLL Clock Module
diff --git a/include/asm-m68k/m5301x.h b/include/asm-m68k/m5301x.h
index 80cefc4..0920a0d 100644
--- a/include/asm-m68k/m5301x.h
+++ b/include/asm-m68k/m5301x.h
@@ -254,7 +254,7 @@
#define CCM_MISCCR_PLL_LOCK (0x2000)
#define CCM_MISCCR_LIMP (0x1000)
#define CCM_MISCCR_BME (0x8000)
-#define CCM_MISCCR_BMT_MASK (0xF8FF)
+#define CCM_MISCCR_BMT_UNMASK (0xF8FF)
#define CCM_MISCCR_BMT(x) (((x) & 0x0007) << 8)
#define CCM_MISCCR_BMT_512 (0x0700)
#define CCM_MISCCR_BMT_1024 (0x0600)
@@ -330,32 +330,32 @@
#define GPIO_PAR_CS5 (0x40)
#define GPIO_PAR_CS4 (0x10)
-#define GPIO_PAR_CS1_MASK (0xF3)
+#define GPIO_PAR_CS1_UNMASK (0xF3)
#define GPIO_PAR_CS1_CS1 (0x0C)
#define GPIO_PAR_CS1_SDCS1 (0x08)
-#define GPIO_PAR_CS0_MASK (0xFC)
+#define GPIO_PAR_CS0_UNMASK (0xFC)
#define GPIO_PAR_CS0_CS0 (0x03)
#define GPIO_PAR_CS0_CS4 (0x02)
-#define GPIO_PAR_DSPIH_SIN_MASK (0x3F)
+#define GPIO_PAR_DSPIH_SIN_UNMASK (0x3F)
#define GPIO_PAR_DSPIH_SIN (0xC0)
#define GPIO_PAR_DSPIH_SIN_U2RXD (0x80)
-#define GPIO_PAR_DSPIH_SOUT_MASK (0xCF)
+#define GPIO_PAR_DSPIH_SOUT_UNMASK (0xCF)
#define GPIO_PAR_DSPIH_SOUT (0x30)
#define GPIO_PAR_DSPIH_SOUT_U2TXD (0x20)
-#define GPIO_PAR_DSPIH_SCK_MASK (0xF3)
+#define GPIO_PAR_DSPIH_SCK_UNMASK (0xF3)
#define GPIO_PAR_DSPIH_SCK (0x0C)
#define GPIO_PAR_DSPIH_SCK_U2CTS (0x08)
-#define GPIO_PAR_DSPIH_PCS0_MASK (0xFC)
+#define GPIO_PAR_DSPIH_PCS0_UNMASK (0xFC)
#define GPIO_PAR_DSPIH_PCS0 (0x03)
#define GPIO_PAR_DSPIH_PCS0_U2RTS (0x02)
-#define GPIO_PAR_DSPIL_PCS1_MASK (0x3F)
+#define GPIO_PAR_DSPIL_PCS1_UNMASK (0x3F)
#define GPIO_PAR_DSPIL_PCS1 (0xC0)
-#define GPIO_PAR_DSPIL_PCS2_MASK (0xCF)
+#define GPIO_PAR_DSPIL_PCS2_UNMASK (0xCF)
#define GPIO_PAR_DSPIL_PCS2 (0x30)
#define GPIO_PAR_DSPIL_PCS2_USBH_OC (0x20)
-#define GPIO_PAR_DSPIL_PCS3_MASK (0xF3)
+#define GPIO_PAR_DSPIL_PCS3_UNMASK (0xF3)
#define GPIO_PAR_DSPIL_PCS3 (0x0C)
#define GPIO_PAR_DSPIL_PCS3_USBH_EN (0x08)
@@ -365,30 +365,30 @@
#define GPIO_PAR_FEC0_RMII_FEC (0x01)
/* GPIO_PAR_FECI2C */
-#define GPIO_PAR_FECI2C_RMII0_MASK (0x3F)
+#define GPIO_PAR_FECI2C_RMII0_UNMASK (0x3F)
#define GPIO_PAR_FECI2C_MDC0 (0x80)
#define GPIO_PAR_FECI2C_MDIO0 (0x40)
-#define GPIO_PAR_FECI2C_RMII1_MASK (0xCF)
+#define GPIO_PAR_FECI2C_RMII1_UNMASK (0xCF)
#define GPIO_PAR_FECI2C_MDC1 (0x20)
#define GPIO_PAR_FECI2C_MDIO1 (0x10)
-#define GPIO_PAR_FECI2C_SDA_MASK (0xF3)
+#define GPIO_PAR_FECI2C_SDA_UNMASK (0xF3)
#define GPIO_PAR_FECI2C_SDA(x) (((x) & 0x03) << 2)
#define GPIO_PAR_FECI2C_SDA_SDA (0x0C)
#define GPIO_PAR_FECI2C_SDA_U2TXD (0x08)
#define GPIO_PAR_FECI2C_SDA_MDIO1 (0x04)
-#define GPIO_PAR_FECI2C_SCL_MASK (0xFC)
+#define GPIO_PAR_FECI2C_SCL_UNMASK (0xFC)
#define GPIO_PAR_FECI2C_SCL(x) ((x) & 0x03)
#define GPIO_PAR_FECI2C_SCL_SCL (0x03)
#define GPIO_PAR_FECI2C_SCL_U2RXD (0x02)
#define GPIO_PAR_FECI2C_SCL_MDC1 (0x01)
-#define GPIO_PAR_IRQ0H_IRQ07_MASK (0x3F)
-#define GPIO_PAR_IRQ0H_IRQ06_MASK (0xCF)
+#define GPIO_PAR_IRQ0H_IRQ07_UNMASK (0x3F)
+#define GPIO_PAR_IRQ0H_IRQ06_UNMASK (0xCF)
#define GPIO_PAR_IRQ0H_IRQ06_USBCLKIN (0x10)
-#define GPIO_PAR_IRQ0H_IRQ04_MASK (0xFC)
+#define GPIO_PAR_IRQ0H_IRQ04_UNMASK (0xFC)
#define GPIO_PAR_IRQ0H_IRQ04_DREQ0 (0x02)
-#define GPIO_PAR_IRQ0L_IRQ01_MASK (0xF3)
+#define GPIO_PAR_IRQ0L_IRQ01_UNMASK (0xF3)
#define GPIO_PAR_IRQ0L_IRQ01_DREQ1 (0x08)
#define GPIO_PAR_IRQ1H_IRQ17_DDATA3 (0x40)
@@ -401,24 +401,24 @@
#define GPIO_PAR_IRQ1L_IRQ11_PST1 (0x04)
#define GPIO_PAR_IRQ1L_IRQ10_PST0 (0x01)
-#define GPIO_PAR_SIMP1H_DATA1_MASK (0x3F)
+#define GPIO_PAR_SIMP1H_DATA1_UNMASK (0x3F)
#define GPIO_PAR_SIMP1H_DATA1_SIMDATA1 (0xC0)
#define GPIO_PAR_SIMP1H_DATA1_SSITXD (0x80)
#define GPIO_PAR_SIMP1H_DATA1_U1TXD (0x40)
-#define GPIO_PAR_SIMP1H_VEN1_MASK (0xCF)
+#define GPIO_PAR_SIMP1H_VEN1_UNMASK (0xCF)
#define GPIO_PAR_SIMP1H_VEN1_SIMVEN1 (0x30)
#define GPIO_PAR_SIMP1H_VEN1_SSIRXD (0x20)
#define GPIO_PAR_SIMP1H_VEN1_U1RXD (0x10)
-#define GPIO_PAR_SIMP1H_RST1_MASK (0xF3)
+#define GPIO_PAR_SIMP1H_RST1_UNMASK (0xF3)
#define GPIO_PAR_SIMP1H_RST1_SIMRST1 (0x0C)
#define GPIO_PAR_SIMP1H_RST1_SSIFS (0x08)
#define GPIO_PAR_SIMP1H_RST1_U1RTS (0x04)
-#define GPIO_PAR_SIMP1H_PD1_MASK (0xFC)
+#define GPIO_PAR_SIMP1H_PD1_UNMASK (0xFC)
#define GPIO_PAR_SIMP1H_PD1_SIMPD1 (0x03)
#define GPIO_PAR_SIMP1H_PD1_SSIBCLK (0x02)
#define GPIO_PAR_SIMP1H_PD1_U1CTS (0x01)
-#define GPIO_PAR_SIMP1L_CLK_MASK (0x3F)
+#define GPIO_PAR_SIMP1L_CLK_UNMASK (0x3F)
#define GPIO_PAR_SIMP1L_CLK_CLK1 (0xC0)
#define GPIO_PAR_SIMP1L_CLK_SSIMCLK (0x80)
@@ -432,19 +432,19 @@
#define GPIO_PAR_TIN2(x) (((x) & 0x03) << 4)
#define GPIO_PAR_TIN1(x) (((x) & 0x03) << 2)
#define GPIO_PAR_TIN0(x) ((x) & 0x03)
-#define GPIO_PAR_TIN3_MASK (0x3F)
+#define GPIO_PAR_TIN3_UNMASK (0x3F)
#define GPIO_PAR_TIN3_TIN3 (0xC0)
#define GPIO_PAR_TIN3_TOUT3 (0x80)
#define GPIO_PAR_TIN3_IRQ03 (0x40)
-#define GPIO_PAR_TIN2_MASK (0xCF)
+#define GPIO_PAR_TIN2_UNMASK (0xCF)
#define GPIO_PAR_TIN2_TIN2 (0x30)
#define GPIO_PAR_TIN2_TOUT2 (0x20)
#define GPIO_PAR_TIN2_IRQ02 (0x10)
-#define GPIO_PAR_TIN1_MASK (0xF3)
+#define GPIO_PAR_TIN1_UNMASK (0xF3)
#define GPIO_PAR_TIN1_TIN1 (0x0C)
#define GPIO_PAR_TIN1_TOUT1 (0x08)
#define GPIO_PAR_TIN1_DACK1 (0x04)
-#define GPIO_PAR_TIN0_MASK (0xFC)
+#define GPIO_PAR_TIN0_UNMASK (0xFC)
#define GPIO_PAR_TIN0_TIN0 (0x03)
#define GPIO_PAR_TIN0_TOUT0 (0x02)
#define GPIO_PAR_TIN0_CODEC_ALTCLK (0x01)
@@ -455,10 +455,10 @@
#define GPIO_PAR_UART_U0RXD (0x10)
#define GPIO_PAR_UART_RTS0(x) (((x) & 0x03) << 2)
#define GPIO_PAR_UART_CTS0(x) ((x) & 0x03)
-#define GPIO_PAR_UART_RTS0_MASK (0xF3)
+#define GPIO_PAR_UART_RTS0_UNMASK (0xF3)
#define GPIO_PAR_UART_RTS0_U0RTS (0x0C)
#define GPIO_PAR_UART_RTS0_USBO_VBOC (0x08)
-#define GPIO_PAR_UART_CTS0_MASK (0xFC)
+#define GPIO_PAR_UART_CTS0_UNMASK (0xFC)
#define GPIO_PAR_UART_CTS0_U0CTS (0x03)
#define GPIO_PAR_UART_CTS0_USB0_VBEN (0x02)
#define GPIO_PAR_UART_CTS0_USB_PULLUP (0x01)
@@ -476,20 +476,20 @@
#define GPIO_PAR_SSIH_TXD(x) (((x) & 0x03) << 4)
#define GPIO_PAR_SSIH_FS(x) (((x) & 0x03) << 2)
#define GPIO_PAR_SSIH_MCLK(x) ((x) & 0x03)
-#define GPIO_PAR_SSIH_RXD_MASK (0x3F)
+#define GPIO_PAR_SSIH_RXD_UNMASK (0x3F)
#define GPIO_PAR_SSIH_RXD_SSIRXD (0xC0)
#define GPIO_PAR_SSIH_RXD_U1RXD (0x40)
-#define GPIO_PAR_SSIH_TXD_MASK (0xCF)
+#define GPIO_PAR_SSIH_TXD_UNMASK (0xCF)
#define GPIO_PAR_SSIH_TXD_SSIRXD (0x30)
#define GPIO_PAR_SSIH_TXD_U1TXD (0x10)
-#define GPIO_PAR_SSIH_FS_MASK (0xF3)
+#define GPIO_PAR_SSIH_FS_UNMASK (0xF3)
#define GPIO_PAR_SSIH_FS_SSIFS (0x0C)
#define GPIO_PAR_SSIH_FS_U1RTS (0x04)
-#define GPIO_PAR_SSIH_MCLK_MASK (0xFC)
+#define GPIO_PAR_SSIH_MCLK_UNMASK (0xFC)
#define GPIO_PAR_SSIH_MCLK_SSIMCLK (0x03)
#define GPIO_PAR_SSIH_MCLK_SSICLKIN (0x01)
-#define GPIO_PAR_SSIL_MASK (0x3F)
+#define GPIO_PAR_SSIL_UNMASK (0x3F)
#define GPIO_PAR_SSIL_BCLK (0xC0)
#define GPIO_PAR_SSIL_U1CTS (0x40)
@@ -497,40 +497,40 @@
#define GPIO_MSCR_MSCR2(x) (((x) & 0x07) << 5)
#define GPIO_MSCR_MSCR3(x) (((x) & 0x07) << 5)
#define GPIO_MSCR_MSCR4(x) (((x) & 0x07) << 5)
-#define GPIO_MSCR_MSCRn_MASK (0x1F)
+#define GPIO_MSCR_MSCRn_UNMASK (0x1F)
#define GPIO_MSCR_MSCRn_SDR (0xE0)
#define GPIO_MSCR_MSCRn_25VDDR (0x60)
#define GPIO_MSCR_MSCRn_18VDDR_FULL (0x20)
#define GPIO_MSCR_MSCRn_18VDDR_HALF (0x00)
#define GPIO_MSCR_MSCR5(x) (((x) & 0x07) << 2)
-#define GPIO_MSCR_MSCR5_MASK (0xE3)
+#define GPIO_MSCR_MSCR5_UNMASK (0xE3)
#define GPIO_MSCR_MSCR5_SDR (0x1C)
#define GPIO_MSCR_MSCR5_25VDDR (0x0C)
#define GPIO_MSCR_MSCR5_18VDDR_FULL (0x04)
#define GPIO_MSCR_MSCR5_18VDDR_HALF (0x00)
-#define GPIO_SRCR_DSPI_MASK (0xFC)
+#define GPIO_SRCR_DSPI_UNMASK (0xFC)
#define GPIO_SRCR_DSPI(x) ((x) & 0x03)
-#define GPIO_SRCR_I2C_MASK (0xFC)
+#define GPIO_SRCR_I2C_UNMASK (0xFC)
#define GPIO_SRCR_I2C(x) ((x) & 0x03)
-#define GPIO_SRCR_IRQ_IRQ0_MASK (0xF3)
+#define GPIO_SRCR_IRQ_IRQ0_UNMASK (0xF3)
#define GPIO_SRCR_IRQ_IRQ0(x) (((x) & 0x03) << 2)
-#define GPIO_SRCR_IRQ_IRQ1DBG_MASK (0xFC)
+#define GPIO_SRCR_IRQ_IRQ1DBG_UNMASK (0xFC)
#define GPIO_SRCR_IRQ_IRQ1DBG(x) ((x) & 0x03)
-#define GPIO_SRCR_SIM_SIMP0_MASK (0xF3)
+#define GPIO_SRCR_SIM_SIMP0_UNMASK (0xF3)
#define GPIO_SRCR_SIM_SIMP0(x) (((x) & 0x03) << 2)
-#define GPIO_SRCR_SIM_SIMP1_MASK (0xFC)
+#define GPIO_SRCR_SIM_SIMP1_UNMASK (0xFC)
#define GPIO_SRCR_SIM_SIMP1(x) ((x) & 0x03)
-#define GPIO_SRCR_TIMER_MASK (0xFC)
+#define GPIO_SRCR_TIMER_UNMASK (0xFC)
#define GPIO_SRCR_TIMER(x) ((x) & 0x03)
-#define GPIO_SRCR_UART2_MASK (0xF3)
+#define GPIO_SRCR_UART2_UNMASK (0xF3)
#define GPIO_SRCR_UART2(x) (((x) & 0x03) << 2)
-#define GPIO_SRCR_UART0_MASK (0xFC)
+#define GPIO_SRCR_UART0_UNMASK (0xFC)
#define GPIO_SRCR_UART0(x) ((x) & 0x03)
-#define GPIO_SRCR_SDHC_MASK (0xFC)
+#define GPIO_SRCR_SDHC_UNMASK (0xFC)
#define GPIO_SRCR_SDHC(x) ((x) & 0x03)
-#define GPIO_SRCR_SSI_MASK (0xFC)
+#define GPIO_SRCR_SSI_UNMASK (0xFC)
#define GPIO_SRCR_SSI(x) ((x) & 0x03)
#define SRCR_HIGHEST (0x03)
@@ -538,11 +538,11 @@
#define SRCR_LOW (0x01)
#define SRCR_LOWEST (0x00)
-#define GPIO_DSCR_FEC_RMIICLK_MASK (0xCF)
+#define GPIO_DSCR_FEC_RMIICLK_UNMASK (0xCF)
#define GPIO_DSCR_FEC_RMIICLK(x) (((x) & 0x03) << 4)
-#define GPIO_DSCR_FEC_RMII0_MASK (0xF3)
+#define GPIO_DSCR_FEC_RMII0_UNMASK (0xF3)
#define GPIO_DSCR_FEC_RMII0(x) (((x) & 0x03) << 2)
-#define GPIO_DSCR_FEC_RMII1_MASK (0xFC)
+#define GPIO_DSCR_FEC_RMII1_UNMASK (0xFC)
#define GPIO_DSCR_FEC_RMII1(x) ((x) & 0x03)
#define DSCR_50PF (0x03)
@@ -572,18 +572,18 @@
#define PLL_PCR_LOL_IRQ (0x00004000)
#define PLL_PCR_LOL_RE (0x00002000)
#define PLL_PCR_LOL_EN (0x00001000)
-#define PLL_PCR_REFDIV_MASK (0xFFFFF8FF)
+#define PLL_PCR_REFDIV_UNMASK (0xFFFFF8FF)
#define PLL_PCR_REFDIV(x) (((x) & 0x07) << 8)
-#define PLL_PCR_FBDIV_MASK (0xFFFFFFC0)
+#define PLL_PCR_FBDIV_UNMASK (0xFFFFFFC0)
#define PLL_PCR_FBDIV(x) ((x) & 0x3F)
-#define PLL_PDR_OUTDIV4_MASK (0x0FFF)
+#define PLL_PDR_OUTDIV4_UNMASK (0x0FFF)
#define PLL_PDR_OUTDIV4(x) (((x) & 0x0000000F) << 12)
-#define PLL_PDR_OUTDIV3_MASK (0xF0FF)
+#define PLL_PDR_OUTDIV3_UNMASK (0xF0FF)
#define PLL_PDR_OUTDIV3(x) (((x) & 0x0000000F) << 8)
-#define PLL_PDR_OUTDIV2_MASK (0xFF0F)
+#define PLL_PDR_OUTDIV2_UNMASK (0xFF0F)
#define PLL_PDR_OUTDIV2(x) (((x) & 0x0000000F) << 4)
-#define PLL_PDR_OUTDIV1_MASK (0xFFF0)
+#define PLL_PDR_OUTDIV1_UNMASK (0xFFF0)
#define PLL_PDR_OUTDIV1(x) ((x) & 0x0000000F)
#define PLL_PDR_USB(x) PLL_PDR_OUTDIV4(x)
#define PLL_PDR_SDRAM(x) PLL_PDR_OUTDIV3(x)
diff --git a/include/asm-m68k/m5445x.h b/include/asm-m68k/m5445x.h
index 5966621..dfddde6 100644
--- a/include/asm-m68k/m5445x.h
+++ b/include/asm-m68k/m5445x.h
@@ -286,13 +286,13 @@
/* Bit definitions and macros for PAR_FEC */
#define GPIO_PAR_FEC_FEC0(x) (((x)&0x07))
#define GPIO_PAR_FEC_FEC1(x) (((x)&0x07)<<4)
-#define GPIO_PAR_FEC_FEC1_MASK (0x8F)
+#define GPIO_PAR_FEC_FEC1_UNMASK (0x8F)
#define GPIO_PAR_FEC_FEC1_MII (0x70)
#define GPIO_PAR_FEC_FEC1_RMII_GPIO (0x30)
#define GPIO_PAR_FEC_FEC1_RMII_ATA (0x20)
#define GPIO_PAR_FEC_FEC1_ATA (0x10)
#define GPIO_PAR_FEC_FEC1_GPIO (0x00)
-#define GPIO_PAR_FEC_FEC0_MASK (0xF8)
+#define GPIO_PAR_FEC_FEC0_UNMASK (0xF8)
#define GPIO_PAR_FEC_FEC0_MII (0x07)
#define GPIO_PAR_FEC_FEC0_RMII_GPIO (0x03)
#define GPIO_PAR_FEC_FEC0_RMII_ULPI (0x02)
@@ -304,15 +304,15 @@
#define GPIO_PAR_DMA_DACK0(x) (((x)&0x03)<<2)
#define GPIO_PAR_DMA_DREQ1(x) (((x)&0x03)<<4)
#define GPIO_PAR_DMA_DACK1(x) (((x)&0x03)<<6)
-#define GPIO_PAR_DMA_DACK1_MASK (0x3F)
+#define GPIO_PAR_DMA_DACK1_UNMASK (0x3F)
#define GPIO_PAR_DMA_DACK1_DACK1 (0xC0)
#define GPIO_PAR_DMA_DACK1_ULPI_DIR (0x40)
#define GPIO_PAR_DMA_DACK1_GPIO (0x00)
-#define GPIO_PAR_DMA_DREQ1_MASK (0xCF)
+#define GPIO_PAR_DMA_DREQ1_UNMASK (0xCF)
#define GPIO_PAR_DMA_DREQ1_DREQ1 (0x30)
#define GPIO_PAR_DMA_DREQ1_USB_CLKIN (0x10)
#define GPIO_PAR_DMA_DREQ1_GPIO (0x00)
-#define GPIO_PAR_DMA_DACK0_MASK (0xF3)
+#define GPIO_PAR_DMA_DACK0_UNMASK (0xF3)
#define GPIO_PAR_DMA_DACK0_DACK1 (0x0C)
#define GPIO_PAR_DMA_DACK0_ULPI_DIR (0x04)
#define GPIO_PAR_DMA_DACK0_GPIO (0x00)
@@ -330,7 +330,7 @@
#define GPIO_PAR_FBCTL_TA_GPIO (0x00)
#define GPIO_PAR_FBCTL_RW_RW (0x20)
#define GPIO_PAR_FBCTL_RW_GPIO (0x00)
-#define GPIO_PAR_FBCTL_TS_MASK (0xE7)
+#define GPIO_PAR_FBCTL_TS_UNMASK (0xE7)
#define GPIO_PAR_FBCTL_TS_TS (0x18)
#define GPIO_PAR_FBCTL_TS_ALE (0x10)
#define GPIO_PAR_FBCTL_TS_TBST (0x08)
@@ -364,11 +364,11 @@
#define GPIO_PAR_BE_BS1 (0x04)
#define GPIO_PAR_BE_BS2(x) (((x)&0x03)<<4)
#define GPIO_PAR_BE_BS3(x) (((x)&0x03)<<6)
-#define GPIO_PAR_BE_BE3_MASK (0x3F)
+#define GPIO_PAR_BE_BE3_UNMASK (0x3F)
#define GPIO_PAR_BE_BE3_BE3 (0xC0)
#define GPIO_PAR_BE_BE3_TSIZ1 (0x80)
#define GPIO_PAR_BE_BE3_GPIO (0x00)
-#define GPIO_PAR_BE_BE2_MASK (0xCF)
+#define GPIO_PAR_BE_BE2_UNMASK (0xCF)
#define GPIO_PAR_BE_BE2_BE2 (0x30)
#define GPIO_PAR_BE_BE2_TSIZ0 (0x20)
#define GPIO_PAR_BE_BE2_GPIO (0x00)
@@ -393,22 +393,22 @@
#define GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2)
#define GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4)
#define GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6)
-#define GPIO_PAR_TIMER_T3IN_MASK (0x3F)
+#define GPIO_PAR_TIMER_T3IN_UNMASK (0x3F)
#define GPIO_PAR_TIMER_T3IN_T3IN (0xC0)
#define GPIO_PAR_TIMER_T3IN_T3OUT (0x80)
#define GPIO_PAR_TIMER_T3IN_U2RXD (0x40)
#define GPIO_PAR_TIMER_T3IN_GPIO (0x00)
-#define GPIO_PAR_TIMER_T2IN_MASK (0xCF)
+#define GPIO_PAR_TIMER_T2IN_UNMASK (0xCF)
#define GPIO_PAR_TIMER_T2IN_T2IN (0x30)
#define GPIO_PAR_TIMER_T2IN_T2OUT (0x20)
#define GPIO_PAR_TIMER_T2IN_U2TXD (0x10)
#define GPIO_PAR_TIMER_T2IN_GPIO (0x00)
-#define GPIO_PAR_TIMER_T1IN_MASK (0xF3)
+#define GPIO_PAR_TIMER_T1IN_UNMASK (0xF3)
#define GPIO_PAR_TIMER_T1IN_T1IN (0x0C)
#define GPIO_PAR_TIMER_T1IN_T1OUT (0x08)
#define GPIO_PAR_TIMER_T1IN_U2CTS (0x04)
#define GPIO_PAR_TIMER_T1IN_GPIO (0x00)
-#define GPIO_PAR_TIMER_T0IN_MASK (0xFC)
+#define GPIO_PAR_TIMER_T0IN_UNMASK (0xFC)
#define GPIO_PAR_TIMER_T0IN_T0IN (0x03)
#define GPIO_PAR_TIMER_T0IN_T0OUT (0x02)
#define GPIO_PAR_TIMER_T0IN_U2RTS (0x01)
@@ -417,12 +417,12 @@
/* Bit definitions and macros for PAR_USB */
#define GPIO_PAR_USB_VBUSOC(x) (((x)&0x03))
#define GPIO_PAR_USB_VBUSEN(x) (((x)&0x03)<<2)
-#define GPIO_PAR_USB_VBUSEN_MASK (0xF3)
+#define GPIO_PAR_USB_VBUSEN_UNMASK (0xF3)
#define GPIO_PAR_USB_VBUSEN_VBUSEN (0x0C)
#define GPIO_PAR_USB_VBUSEN_USBPULLUP (0x08)
#define GPIO_PAR_USB_VBUSEN_ULPI_NXT (0x04)
#define GPIO_PAR_USB_VBUSEN_GPIO (0x00)
-#define GPIO_PAR_USB_VBUSOC_MASK (0xFC)
+#define GPIO_PAR_USB_VBUSOC_UNMASK (0xFC)
#define GPIO_PAR_USB_VBUSOC_VBUSOC (0x03)
#define GPIO_PAR_USB_VBUSOC_ULPI_STP (0x01)
#define GPIO_PAR_USB_VBUSOC_GPIO (0x00)
@@ -460,11 +460,11 @@
#define GPIO_PAR_FECI2C_MDC0 (0x0040)
#define GPIO_PAR_FECI2C_MDIO1(x) (((x)&0x0003)<<8)
#define GPIO_PAR_FECI2C_MDC1(x) (((x)&0x0003)<<10)
-#define GPIO_PAR_FECI2C_MDC1_MASK (0xF3FF)
+#define GPIO_PAR_FECI2C_MDC1_UNMASK (0xF3FF)
#define GPIO_PAR_FECI2C_MDC1_MDC1 (0x0C00)
#define GPIO_PAR_FECI2C_MDC1_ATA_DIOR (0x0800)
#define GPIO_PAR_FECI2C_MDC1_GPIO (0x0000)
-#define GPIO_PAR_FECI2C_MDIO1_MASK (0xFCFF)
+#define GPIO_PAR_FECI2C_MDIO1_UNMASK (0xFCFF)
#define GPIO_PAR_FECI2C_MDIO1_MDIO1 (0x0300)
#define GPIO_PAR_FECI2C_MDIO1_ATA_DIOW (0x0200)
#define GPIO_PAR_FECI2C_MDIO1_GPIO (0x0000)
@@ -472,11 +472,11 @@
#define GPIO_PAR_FECI2C_MDC0_GPIO (0x0000)
#define GPIO_PAR_FECI2C_MDIO0_MDIO0 (0x0010)
#define GPIO_PAR_FECI2C_MDIO0_GPIO (0x0000)
-#define GPIO_PAR_FECI2C_SCL_MASK (0xFFF3)
+#define GPIO_PAR_FECI2C_SCL_UNMASK (0xFFF3)
#define GPIO_PAR_FECI2C_SCL_SCL (0x000C)
#define GPIO_PAR_FECI2C_SCL_U2TXD (0x0004)
#define GPIO_PAR_FECI2C_SCL_GPIO (0x0000)
-#define GPIO_PAR_FECI2C_SDA_MASK (0xFFFC)
+#define GPIO_PAR_FECI2C_SDA_UNMASK (0xFFFC)
#define GPIO_PAR_FECI2C_SDA_SDA (0x0003)
#define GPIO_PAR_FECI2C_SDA_U2RXD (0x0001)
#define GPIO_PAR_FECI2C_SDA_GPIO (0x0000)
@@ -487,19 +487,19 @@
#define GPIO_PAR_SSI_SRXD(x) (((x)&0x0003)<<4)
#define GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<6)
#define GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<8)
-#define GPIO_PAR_SSI_BCLK_MASK (0xFCFF)
+#define GPIO_PAR_SSI_BCLK_UNMASK (0xFCFF)
#define GPIO_PAR_SSI_BCLK_BCLK (0x0300)
#define GPIO_PAR_SSI_BCLK_U1CTS (0x0200)
#define GPIO_PAR_SSI_BCLK_GPIO (0x0000)
-#define GPIO_PAR_SSI_FS_MASK (0xFF3F)
+#define GPIO_PAR_SSI_FS_UNMASK (0xFF3F)
#define GPIO_PAR_SSI_FS_FS (0x00C0)
#define GPIO_PAR_SSI_FS_U1RTS (0x0080)
#define GPIO_PAR_SSI_FS_GPIO (0x0000)
-#define GPIO_PAR_SSI_SRXD_MASK (0xFFCF)
+#define GPIO_PAR_SSI_SRXD_UNMASK (0xFFCF)
#define GPIO_PAR_SSI_SRXD_SRXD (0x0030)
#define GPIO_PAR_SSI_SRXD_U1RXD (0x0020)
#define GPIO_PAR_SSI_SRXD_GPIO (0x0000)
-#define GPIO_PAR_SSI_STXD_MASK (0xFFF3)
+#define GPIO_PAR_SSI_STXD_UNMASK (0xFFF3)
#define GPIO_PAR_SSI_STXD_STXD (0x000C)
#define GPIO_PAR_SSI_STXD_U1TXD (0x0008)
#define GPIO_PAR_SSI_STXD_GPIO (0x0000)
@@ -552,7 +552,7 @@
#define GPIO_PAR_PCI_GNT1 (0x0400)
#define GPIO_PAR_PCI_GNT2 (0x1000)
#define GPIO_PAR_PCI_GNT3(x) (((x)&0x0003)<<14)
-#define GPIO_PAR_PCI_GNT3_MASK (0x3FFF)
+#define GPIO_PAR_PCI_GNT3_UNMASK (0x3FFF)
#define GPIO_PAR_PCI_GNT3_GNT3 (0xC000)
#define GPIO_PAR_PCI_GNT3_ATA_DMACK (0x8000)
#define GPIO_PAR_PCI_GNT3_GPIO (0x0000)
@@ -562,7 +562,7 @@
#define GPIO_PAR_PCI_GNT1_GPIO (0x0000)
#define GPIO_PAR_PCI_GNT0_GNT0 (0x0100)
#define GPIO_PAR_PCI_GNT0_GPIO (0x0000)
-#define GPIO_PAR_PCI_REQ3_MASK (0xFF3F)
+#define GPIO_PAR_PCI_REQ3_UNMASK (0xFF3F)
#define GPIO_PAR_PCI_REQ3_REQ3 (0x00C0)
#define GPIO_PAR_PCI_REQ3_ATA_INTRQ (0x0080)
#define GPIO_PAR_PCI_REQ3_GPIO (0x0000)
@@ -578,22 +578,22 @@
#define GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2)
#define GPIO_MSCR_SDRAM_SDDQS(x) (((x)&0x03)<<4)
#define GPIO_MSCR_SDRAM_SDDATA(x) (((x)&0x03)<<6)
-#define GPIO_MSCR_SDRAM_SDDATA_MASK (0x3F)
+#define GPIO_MSCR_SDRAM_SDDATA_UNMASK (0x3F)
#define GPIO_MSCR_SDRAM_SDDATA_DDR1 (0xC0)
#define GPIO_MSCR_SDRAM_SDDATA_DDR2 (0x80)
#define GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR (0x40)
#define GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR (0x00)
-#define GPIO_MSCR_SDRAM_SDDQS_MASK (0xCF)
+#define GPIO_MSCR_SDRAM_SDDQS_UNMASK (0xCF)
#define GPIO_MSCR_SDRAM_SDDQS_DDR1 (0x30)
#define GPIO_MSCR_SDRAM_SDDQS_DDR2 (0x20)
#define GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR (0x10)
#define GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR (0x00)
-#define GPIO_MSCR_SDRAM_SDCLK_MASK (0xF3)
+#define GPIO_MSCR_SDRAM_SDCLK_UNMASK (0xF3)
#define GPIO_MSCR_SDRAM_SDCLK_DDR1 (0x0C)
#define GPIO_MSCR_SDRAM_SDCLK_DDR2 (0x08)
#define GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR (0x04)
#define GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR (0x00)
-#define GPIO_MSCR_SDRAM_SDCTL_MASK (0xFC)
+#define GPIO_MSCR_SDRAM_SDCTL_UNMASK (0xFC)
#define GPIO_MSCR_SDRAM_SDCTL_DDR1 (0x03)
#define GPIO_MSCR_SDRAM_SDCTL_DDR2 (0x02)
#define GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR (0x01)
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 8c5a742..44befe9 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -471,13 +471,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
-# define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
-# define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-# define CONFIG_SYS_HID0_INIT 0
-# define CONFIG_SYS_HID0_FINAL 0
-#endif
+#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL HID0_ICE
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index a0b27a8..880cb4e 100644
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -208,6 +208,18 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \
+ CF_CACR_CEIB | CF_CACR_DBWE | \
+ CF_CACR_EUSP)
+
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 5ef0b77..5d3a744 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -30,6 +30,7 @@
*/
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */
#define CONFIG_ICECUBE 1 /* ... on IceCube board */
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
@@ -47,7 +48,6 @@
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
@@ -77,10 +77,6 @@
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
-#else
-#define CONFIG_MII 1
-#endif
-
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -169,7 +165,6 @@
#define CONFIG_BOOTCOMMAND "run flash_self"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
@@ -178,7 +173,6 @@
#else
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
#endif
-#endif /* CONFIG_MPC5200 */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
@@ -338,13 +332,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#if defined(CONFIG_LITE5200B)
#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h
index 32123d2..e6632ac 100644
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -158,7 +158,7 @@
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */
#define CONFIG_SYS_SDRAM_CFG1 0x43711630
#define CONFIG_SYS_SDRAM_CFG2 0x56670000
#define CONFIG_SYS_SDRAM_CTRL 0xE1002000
@@ -207,6 +207,19 @@
/* Cache Configuration */
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \
+ CF_CACR_DISD | CF_CACR_INVI | \
+ CF_CACR_CEIB | CF_CACR_DCM | \
+ CF_CACR_EUSP)
+
/* Chipselect bank definitions */
/*
* CS0 - NOR Flash
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index 1801d9d..6c6b5d6 100644
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -302,6 +302,19 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \
+ CF_CACR_DISD | CF_CACR_INVI | \
+ CF_CACR_CEIB | CF_CACR_DCM | \
+ CF_CACR_EUSP)
+
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index 2b816ce..5c0dc84 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -237,6 +237,18 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \
+ CF_CACR_CEIB | CF_CACR_DCM | \
+ CF_CACR_EUSP)
+
/*-----------------------------------------------------------------------
* Chipselect bank definitions
*/
diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h
index e3830e5..33ac285 100644
--- a/include/configs/M5249EVB.h
+++ b/include/configs/M5249EVB.h
@@ -60,6 +60,7 @@
* Command line configuration.
*/
#include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
#undef CONFIG_CMD_NET
#define CONFIG_SYS_PROMPT "=> "
@@ -165,6 +166,20 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \
+ CF_ADDRMASK(2) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \
+ CF_CACR_DBWE)
+
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index 5e86e4c..b5af493 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -57,6 +57,7 @@
*/
#include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
#define CONFIG_CMD_LOADB
#define CONFIG_CMD_LOADS
#define CONFIG_CMD_EXT2
@@ -95,11 +96,6 @@
# define DM9000_DATA (CONFIG_DM9000_BASE + 4)
# undef CONFIG_DM9000_DEBUG
-# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
-# define CONFIG_IPADDR 10.82.121.249
-# define CONFIG_NETMASK 255.255.252.0
-# define CONFIG_SERVERIP 10.82.120.80
-# define CONFIG_GATEWAYIP 10.82.123.254
# define CONFIG_OVERWRITE_ETHADDR_ONCE
# define CONFIG_EXTRA_ENV_SETTINGS \
@@ -109,9 +105,9 @@
"u-boot=u-boot.bin\0" \
"load=tftp ${loadaddr) ${u-boot}\0" \
"upd=run load; run prog\0" \
- "prog=prot off 0 2ffff;" \
- "era 0 2ffff;" \
- "cp.b ${loadaddr} 0 ${filesize};" \
+ "prog=prot off 0xff800000 0xff82ffff;" \
+ "era 0xff800000 0xff82ffff;" \
+ "cp.b ${loadaddr} 0xff800000 ${filesize};" \
"save\0" \
""
#endif
@@ -231,6 +227,20 @@
/* Cache Configuration */
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \
+ CF_ADDRMASK(8) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \
+ CF_CACR_DBWE)
+
/* Port configuration */
#define CONFIG_SYS_FECI2C 0xF0
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h
index df6970c..206d115 100644
--- a/include/configs/M5253EVBE.h
+++ b/include/configs/M5253EVBE.h
@@ -64,6 +64,7 @@
* Command line configuration.
*/
#include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
#undef CONFIG_CMD_NET
#define CONFIG_CMD_LOADB
#define CONFIG_CMD_LOADS
@@ -179,6 +180,20 @@
/* Cache Configuration */
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \
+ CF_ADDRMASK(2) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \
+ CF_CACR_DBWE)
+
/* Port configuration */
#define CONFIG_SYS_FECI2C 0xF0
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index 50b3ab2..798949c 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -72,6 +72,7 @@
*/
#include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
#define CONFIG_CMD_PING
#define CONFIG_CMD_NET
#define CONFIG_CMD_MII
@@ -229,6 +230,19 @@
/* Cache Configuration */
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \
+ CF_CACR_DISD | CF_CACR_INVI | \
+ CF_CACR_CEIB | CF_CACR_DCM | \
+ CF_CACR_EUSP)
+
/* Chip Select 0 : Boot Flash */
#define CONFIG_SYS_CS0_BASE 0xFFE00000
#define CONFIG_SYS_CS0_MASK 0x001F0001
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index f824158..f704bb3 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -74,6 +74,7 @@
*/
#include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
@@ -211,6 +212,19 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \
+ CF_CACR_DISD | CF_CACR_INVI | \
+ CF_CACR_CEIB | CF_CACR_DCM | \
+ CF_CACR_EUSP)
+
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index b380159..981670a 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -72,6 +72,7 @@
/* Available command configuration */
#include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
#define CONFIG_CMD_PING
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
@@ -121,11 +122,6 @@
#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0)
#define CONFIG_SYS_I2C_PINMUX_SET (0x000F)
-#ifdef CONFIG_MCFFEC
-#define CONFIG_ETHADDR 00:06:3b:01:41:55
-#define CONFIG_ETH1ADDR 00:0e:0c:bc:e5:60
-#endif
-
#define CONFIG_SYS_PROMPT "-> "
#define CONFIG_SYS_LONGHELP /* undef to save memory */
@@ -145,6 +141,23 @@
#define CONFIG_SYS_MEMTEST_START 0x400
#define CONFIG_SYS_MEMTEST_END 0x380000
+#ifdef CONFIG_MCFFEC
+# define CONFIG_NET_RETRY_COUNT 5
+# define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif /* FEC_ENET */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "loadaddr=10000\0" \
+ "uboot=u-boot.bin\0" \
+ "load=tftp ${loadaddr} ${uboot}\0" \
+ "upd=run load; run prog\0" \
+ "prog=prot off ffe00000 ffe3ffff;" \
+ "era ffe00000 ffe3ffff;" \
+ "cp.b ${loadaddr} ffe00000 ${filesize};"\
+ "save\0" \
+ ""
+
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CLK 150000000
@@ -208,6 +221,19 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \
+ CF_CACR_DISD | CF_CACR_INVI | \
+ CF_CACR_CEIB | CF_CACR_DCM | \
+ CF_CACR_EUSP)
+
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index 15590cf..6e0aa14 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -64,6 +64,7 @@
* Command line configuration.
*/
#include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_MII
@@ -209,6 +210,18 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \
+ CF_CACR_CEIB | CF_CACR_DBWE | \
+ CF_CACR_EUSP)
+
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
index 30855bd..d983a8f 100644
--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -69,6 +69,8 @@
# define CONFIG_MII_INIT 1
# define CONFIG_SYS_DISCOVER_PHY
# define CONFIG_SYS_RX_ETH_BUFFER 8
+# define CONFIG_SYS_TX_ETH_BUFFER 8
+# define CONFIG_SYS_FEC_BUF_USE_SRAM
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# define CONFIG_HAS_ETH1
@@ -166,7 +168,7 @@
*/
#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
#define CONFIG_SYS_INIT_RAM_END 0x20000 /* End of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_CTRL 0x21
+#define CONFIG_SYS_INIT_RAM_CTRL 0x221
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
@@ -180,7 +182,7 @@
#define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */
#define CONFIG_SYS_SDRAM_CFG1 0x43711630
#define CONFIG_SYS_SDRAM_CFG2 0x56670000
-#define CONFIG_SYS_SDRAM_CTRL 0xE1002000
+#define CONFIG_SYS_SDRAM_CTRL 0xE1092000
#define CONFIG_SYS_SDRAM_EMOD 0x80010000
#define CONFIG_SYS_SDRAM_MODE 0x00CD0000
@@ -231,6 +233,17 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \
+ CF_CACR_DCM_P)
+
/*-----------------------------------------------------------------------
* Chipselect bank definitions
*/
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index 8180c05..159b178 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -237,6 +237,17 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \
+ CF_CACR_DCM_P)
+
/*-----------------------------------------------------------------------
* Chipselect bank definitions
*/
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index 8652a80..af1988c 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -237,6 +237,17 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \
+ CF_CACR_DCM_P)
+
/*-----------------------------------------------------------------------
* Chipselect bank definitions
*/
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
index a5acfd2..a80d330 100644
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -309,6 +309,21 @@
/* Cache Configuration */
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA)
+#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA)
+#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \
+ CF_CACR_ICINVA | CF_CACR_EUSP)
+#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \
+ CF_CACR_DEC | CF_CACR_DDCM_P | \
+ CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
+
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 7737284..5b4bba8 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -279,7 +279,7 @@
* Definitions for initial stack pointer and data area (in DPRAM)
*/
#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
-#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */
#define CONFIG_SYS_INIT_RAM_CTRL 0x221
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32)
@@ -408,6 +408,21 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA)
+#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA)
+#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \
+ CF_CACR_ICINVA | CF_CACR_EUSP)
+#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \
+ CF_CACR_DEC | CF_CACR_DDCM_P | \
+ CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
+
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
index 4534002..d007766 100644
--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -286,6 +286,22 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \
+ CF_CACR_IDCM)
+#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA)
+#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \
+ CF_CACR_IEC | CF_CACR_ICINVA)
+#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \
+ CF_CACR_DEC | CF_CACR_DDCM_P | \
+ CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
+
/*-----------------------------------------------------------------------
* Chipselect bank definitions
*/
diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h
index 971cb67..f23b8b0 100644
--- a/include/configs/M5485EVB.h
+++ b/include/configs/M5485EVB.h
@@ -272,6 +272,22 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \
+ CF_CACR_IDCM)
+#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA)
+#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \
+ CF_CACR_IEC | CF_CACR_ICINVA)
+#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \
+ CF_CACR_DEC | CF_CACR_DDCM_P | \
+ CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
+
/*-----------------------------------------------------------------------
* Chipselect bank definitions
*/
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index f9687d2..22de207 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -50,7 +50,6 @@
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
@@ -75,7 +74,6 @@
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#undef CONFIG_NS8382X
-#endif
/* Partitions */
#define CONFIG_DOS_PARTITION
@@ -111,9 +109,7 @@
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_USB
-#if defined(CONFIG_MPC5200)
#define CONFIG_CMD_PCI
-#endif
/*
@@ -147,12 +143,10 @@
#define CONFIG_BOOTCOMMAND "run flash_self"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#endif
/*
* I2C configuration
*/
@@ -301,13 +295,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#if defined(CONFIG_BOOT_ROM)
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_BOOTROM_BASE
diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index 25f3a26..b69f015 100644
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -252,6 +252,17 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM)
+#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \
+ CF_CACR_DBWE)
+
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 3438aba..6da18eb 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -430,13 +430,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 2154c78..107bff1 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -633,13 +633,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 1daa574..7510ab1 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -41,6 +41,7 @@
*/
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */
#define CONFIG_TOTAL5200 1 /* ... on Total5200 board */
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
@@ -73,7 +74,6 @@
#define CONFIG_SPLASH_SCREEN
-#ifdef CONFIG_MPC5200 /* MGT5100 PCI is not supported yet. */
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
@@ -98,12 +98,6 @@
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
-#else /* MGT5100 */
-
-#define CONFIG_MII 1
-
-#endif
-
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -127,9 +121,7 @@
*/
#include <config_cmd_default.h>
-#if defined(CONFIG_MPC5200)
- #define CONFIG_CMD_PCI
-#endif
+#define CONFIG_CMD_PCI
#define CONFIG_CMD_BMP
#define CONFIG_CMD_EEPROM
@@ -176,12 +168,10 @@
#define CONFIG_BOOTCOMMAND "run flash_self"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#endif
/*
* I2C configuration
@@ -326,17 +316,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
-
-#if defined (CONFIG_MGT5100)
-# define CONFIG_BOARD_EARLY_INIT_R /* switch from CS_BOOT to CS0 */
-#endif
#if CONFIG_TOTAL5200_REV==1
# define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/aev.h b/include/configs/aev.h
index 2b4826d..98958a6 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -362,13 +362,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
new file mode 100644
index 0000000..7c8281c
--- /dev/null
+++ b/include/configs/astro_mcf5373l.h
@@ -0,0 +1,400 @@
+/*
+ * Configuration settings for the Sentec Cobra Board.
+ *
+ * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * configuration for ASTRO "Urmel" board.
+ * Originating from Cobra5272 configuration, messed up by
+ * Wolfgang Wegner <w.wegner@astro-kom.de>
+ * Please do not bother the original author with bug reports
+ * concerning this file.
+ */
+
+#ifndef _CONFIG_ASTRO_MCF5373L_H
+#define _CONFIG_ASTRO_MCF5373L_H
+
+/*
+ * set the card type to actually compile for; either of
+ * the possibilities listed below has to be used!
+ */
+#define CONFIG_ASTRO_V532 1
+
+#if CONFIG_ASTRO_V532
+#define ASTRO_ID 0xF8
+#elif CONFIG_ASTRO_V512
+#define ASTRO_ID 0xFA
+#elif CONFIG_ASTRO_TWIN7S2
+#define ASTRO_ID 0xF9
+#elif CONFIG_ASTRO_V912
+#define ASTRO_ID 0xFC
+#elif CONFIG_ASTRO_COFDMDUOS2
+#define ASTRO_ID 0xFB
+#else
+#error No card type defined!
+#endif
+
+/*
+ * Define processor
+ * possible values for Urmel board: only Coldfire M5373 processor supported
+ * (please do not change)
+ */
+
+/* it seems not clear yet which processor defines we should use */
+#define CONFIG_MCF537x /* define processor family */
+#define CONFIG_MCF532x /* define processor family */
+#define CONFIG_M5373 /* define processor type */
+#define CONFIG_ASTRO5373L /* define board type */
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+/*
+ * CONFIG_MK_RAM defines if u-boot is loaded via BDM (or started from
+ * a different bootloader that has already performed RAM setup) or
+ * started directly from flash, which is the regular case for production
+ * boards.
+ */
+#ifdef CONFIG_MK_RAM
+#define CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_TEXT_BASE 0x40020000
+#define ENABLE_JFFS 0
+#else
+#define CONFIG_TEXT_BASE 0x00000000
+#define ENABLE_JFFS 1
+#endif
+
+/* Define which commmands should be available at u-boot command prompt */
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_XIMG
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#if ENABLE_JFFS
+#define CONFIG_CMD_JFFS2
+#endif
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_FPGA
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+#define CONFIG_MCFRTC
+#undef RTC_DEBUG
+
+/* Timer */
+#define CONFIG_MCFTMR
+#undef CONFIG_MCFPIT
+
+/* I2C */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C /* I2C with hw support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SPEED 80000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x58000
+#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
+
+/*
+ * Defines processor clock - important for correct timings concerning serial
+ * interface etc.
+ * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
+ */
+
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_CLK 80000000
+#define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 3)
+#define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */
+
+#define CONFIG_SYS_CORE_SRAM_SIZE 0x8000
+#define CONFIG_SYS_CORE_SRAM 0x80000000
+
+#define CONFIG_SYS_UNIFY_CACHE
+
+/*
+ * Define baudrate for UART1 (console output, tftp, ...)
+ * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud
+ * CONFIG_SYS_BAUDRATE_TABLE defines values that can be selected
+ * in u-boot command interface
+ */
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+
+#define CONFIG_MCFUART
+#define CONFIG_SYS_UART_PORT (2)
+#define CONFIG_SYS_UART2_ALT3_GPIO
+
+/*
+ * Watchdog configuration; Watchdog is disabled for running from RAM
+ * and set to highest possible value else. Beware there is no check
+ * in the watchdog code to validate the timeout value set here!
+ */
+
+#ifndef CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT 3355 /* timeout in milliseconds */
+#endif
+
+/*
+ * Configuration for environment
+ * Environment is located in the last sector of the flash
+ */
+
+#ifndef CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_ENV_OFFSET 0x1FF8000
+#define CONFIG_ENV_SECT_SIZE 0x8000
+#define CONFIG_ENV_IS_IN_FLASH 1
+#else
+/*
+ * environment in RAM - This is used to use a single PC-based application
+ * to load an image, load U-Boot, load an environment and then start U-Boot
+ * to execute the commands from the environment. Feedback is done via setting
+ * and reading memory locations.
+ */
+#define CONFIG_ENV_ADDR 0x40060000
+#define CONFIG_ENV_SECT_SIZE 0x8000
+#define CONFIG_ENV_IS_IN_FLASH 1
+#endif
+
+/* here we put our FPGA configuration... */
+#define CONFIG_MISC_INIT_R 1
+
+/* Define user parameters that have to be customized most likely */
+
+/* AUTOBOOT settings - booting images automatically by u-boot after power on */
+
+/*
+ * used for autoboot, delay in seconds u-boot will wait before starting
+ * defined (auto-)boot command, setting to -1 disables delay, setting to
+ * 0 will too prevent access to u-boot command interface: u-boot then has
+ * to be reflashed
+ * beware - watchdog is not serviced during autoboot delay time!
+ */
+#ifdef CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_BOOTDELAY 1
+#else
+#define CONFIG_BOOTDELAY 1
+#endif
+
+/*
+ * The following settings will be contained in the environment block ; if you
+ * want to use a neutral environment all those settings can be manually set in
+ * u-boot: 'set' command
+ */
+
+#define _QUOTEME(x) #x
+#define QUOTEME(x) _QUOTEME(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loaderversion=11\0" \
+ "card_id="QUOTEME(ASTRO_ID)"\0" \
+ "alterafile=0\0" \
+ "xilinxfile=0\0" \
+ "xilinxload=imxtract 0x540000 $xilinxfile 0x41000000&&"\
+ "fpga load 0 0x41000000 $filesize\0" \
+ "alteraload=imxtract 0x6c0000 $alterafile 0x41000000&&"\
+ "fpga load 1 0x41000000 $filesize\0" \
+ "env_default=1\0" \
+ "env_check=if test $env_default -eq 1;"\
+ " then setenv env_default 0;saveenv;fi\0"
+
+/*
+ * "update" is a non-standard command that has to be supplied
+ * by external update.c; This is not included in mainline because
+ * it needs non-blocking CFI routines.
+ */
+#ifdef CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_BOOTCOMMAND "" /* no autoboot in this case */
+#else
+#if CONFIG_ASTRO_V532
+#define CONFIG_BOOTCOMMAND "protect off 0x80000 0x1ffffff;run env_check;"\
+ "run xilinxload&&run alteraload&&bootm 0x80000;"\
+ "update;reset"
+#else
+#define CONFIG_BOOTCOMMAND "protect off 0x80000 0x1ffffff;run env_check;"\
+ "run xilinxload&&bootm 0x80000;update;reset"
+#endif
+#endif
+
+/* default bootargs that are considered during boot */
+#define CONFIG_BOOTARGS " console=ttyS2,115200 rootfstype=romfs"\
+ " loaderversion=$loaderversion"
+
+#define CONFIG_SYS_PROMPT "URMEL > "
+
+/* default RAM address for user programs */
+#define CONFIG_SYS_LOAD_ADDR 0x20000
+
+#define CONFIG_SYS_LONGHELP
+
+#if (CONFIG_COMMANDS & CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE 1024
+#else
+#define CONFIG_SYS_CBSIZE 256
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_FPGA_COUNT 1
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN3
+#define CONFIG_FPGA_ALTERA
+#define CONFIG_FPGA_CYCLON2
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_WAIT 1000
+
+/* End of user parameters to be customized */
+
+/* Defines memory range for test */
+
+#define CONFIG_SYS_MEMTEST_START 0x40020000
+#define CONFIG_SYS_MEMTEST_END 0x41ffffff
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/* Base register address */
+
+#define CONFIG_SYS_MBAR 0xFC000000 /* Register Base Addrs */
+
+/* System Conf. Reg. & System Protection Reg. */
+
+#define CONFIG_SYS_SCR 0x0003;
+#define CONFIG_SYS_SPR 0xffff;
+
+/*
+ * Definitions for initial stack pointer and data area (in internal SRAM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
+#define CONFIG_SYS_INIT_RAM_END 0x8000
+#define CONFIG_SYS_INIT_RAM_CTRL 0x221
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
+ CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * for MCF5373, the allowable range is 0x40000000 to 0x7FF00000
+ */
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+
+/*
+ * Chipselect bank definitions
+ *
+ * CS0 - Flash 32MB (first 16MB)
+ * CS1 - Flash 32MB (second half)
+ * CS2 - FPGA
+ * CS3 - FPGA
+ * CS4 - unused
+ * CS5 - unused
+ */
+#define CONFIG_SYS_CS0_BASE 0
+#define CONFIG_SYS_CS0_MASK 0x00ff0001
+#define CONFIG_SYS_CS0_CTRL 0x00001fc0
+
+#define CONFIG_SYS_CS1_BASE 0x01000000
+#define CONFIG_SYS_CS1_MASK 0x00ff0001
+#define CONFIG_SYS_CS1_CTRL 0x00001fc0
+
+#define CONFIG_SYS_CS2_BASE 0x20000000
+#define CONFIG_SYS_CS2_MASK 0x00ff0001
+#define CONFIG_SYS_CS2_CTRL 0x0000fec0
+
+#define CONFIG_SYS_CS3_BASE 0x21000000
+#define CONFIG_SYS_CS3_MASK 0x00ff0001
+#define CONFIG_SYS_CS3_CTRL 0x0000fec0
+
+#define CONFIG_SYS_FLASH_BASE 0x00000000
+
+#ifdef CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_SYS_MONITOR_BASE CONFIG_TEXT_BASE
+#else
+/* This is mainly used during relocation in start.S */
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
+#endif
+/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN (256 << 10)
+
+#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024)
+/* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN (128 << 10)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \
+ (CONFIG_SYS_SDRAM_SIZE << 20))
+
+/* FLASH organization */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 259
+#define CONFIG_SYS_FLASH_ERASE_TOUT 1000
+
+#define CONFIG_SYS_FLASH_CFI 1
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_SIZE 0x2000000
+#define CONFIG_SYS_FLASH_PROTECTION 1
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+#define CONFIG_SYS_FLASH_CFI_NONBLOCK 1
+
+#if ENABLE_JFFS
+/* JFFS Partition offset set */
+#define CONFIG_SYS_JFFS2_FIRST_BANK 0
+#define CONFIG_SYS_JFFS2_NUM_BANKS 1
+/* 512k reserved for u-boot */
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0x40
+#endif
+
+/* Cache Configuration */
+#define CONFIG_SYS_CACHELINE_SIZE 16
+
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \
+ CF_CACR_DCM_P)
+
+#endif /* _CONFIG_ASTRO_MCF5373L_H */
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index 1c3ea23..330e3ac 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -331,6 +331,19 @@ from which user programs will be started */
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \
+ CF_CACR_DISD | CF_CACR_INVI | \
+ CF_CACR_CEIB | CF_CACR_DCM | \
+ CF_CACR_EUSP)
+
/*-----------------------------------------------------------------------
* Memory bank definitions
*
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index 52df16a..f7290d6 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -59,7 +59,6 @@
#define CONFIG_BAUDRATE 9600 /* ... at 115200 bps */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
@@ -90,8 +89,6 @@
#define CONFIG_NS8382X 1
#endif
-#endif
-
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -169,8 +166,6 @@
#define CONFIG_BOOTCOMMAND "run flash_vxworks0"
-#if defined(CONFIG_MPC5200)
-
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
#define CONFIG_SYS_NVRAM_BASE_ADDR 0xfd010000
#define CONFIG_SYS_NVRAM_SIZE 32*1024
@@ -179,7 +174,6 @@
* IPB Bus clocking configuration.
*/
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#endif
/*
* I2C configuration
*/
@@ -303,13 +297,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index a81527e..f9cdcbc 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -261,13 +261,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/idmr.h b/include/configs/idmr.h
index 841affb..61e3bad 100644
--- a/include/configs/idmr.h
+++ b/include/configs/idmr.h
@@ -224,6 +224,19 @@
/* Cache Configuration */
#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_END - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI)
+#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \
+ CF_CACR_DISD | CF_CACR_INVI | \
+ CF_CACR_CEIB | CF_CACR_DCM | \
+ CF_CACR_EUSP)
+
/* Port configuration */
#define CONFIG_SYS_FECI2C 0xF0
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 14f7826..c5b1565 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -366,13 +366,8 @@ static inline void tws_data_config_output(unsigned output)
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index d0cb1e1..6903b36 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -324,13 +324,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h
index b29ef9b..d25e093 100644
--- a/include/configs/manroland/mpc5200-common.h
+++ b/include/configs/manroland/mpc5200-common.h
@@ -170,13 +170,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 4a93b58..73405ea 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -63,9 +63,6 @@
#endif
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
-
#define CONFIG_MII
#if 0 /* test-only !!! */
#define CONFIG_NET_MULTI 1
@@ -74,10 +71,6 @@
#define CONFIG_NS8382X 1
#endif
-#else /* MPC5100 */
-
-#endif
-
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -152,12 +145,10 @@
#define CONFIG_BOOTCOMMAND "run flash_vxworks0"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
#undef CONFIG_SYS_IPBSPEED_133 /* define for 133MHz speed */
-#endif
/*
* I2C configuration
*/
@@ -288,13 +279,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 18e7cc2..bdc0f79 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -138,7 +138,6 @@
#define CONFIG_BOOTCOMMAND "run flash_self"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
@@ -154,7 +153,6 @@
*/
#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
#endif
-#endif
/*
* I2C configuration
@@ -276,13 +274,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 8ca55d7..80a0bc6 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -61,7 +61,6 @@
#endif
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
/*
* PCI Mapping:
* 0x40000000 - 0x4fffffff - PCI Memory
@@ -87,7 +86,6 @@
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
#endif
-#endif
/* Partitions */
#define CONFIG_MAC_PARTITION
@@ -121,9 +119,7 @@
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
-#ifdef CONFIG_MPC5200
#define CONFIG_CMD_PCI
-#endif
#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
@@ -166,12 +162,10 @@
#define CONFIG_BOOTCOMMAND "run flash_vxworks0"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#endif
/*
* I2C configuration
*/
@@ -289,13 +283,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 5a2ef3a..060026b 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -358,13 +358,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 27dda25..d377e19 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -438,13 +438,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
#define CONFIG_SYS_HID0_FINAL HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-#endif
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 92bcdb3..d462ed0 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -170,12 +170,10 @@
#define CONFIG_BOOTCOMMAND "run net_nfs"
-#if defined(CONFIG_MPC5200)
/*
* IPB Bus clocking configuration.
*/
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-#endif
/*
* I2C configuration
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 0a9dd0d..a3d5f8c 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -81,5 +81,7 @@ int fdt_resize(void *blob);
int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size);
+void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
+
#endif /* ifdef CONFIG_OF_LIBFDT */
#endif /* ifndef __FDT_SUPPORT_H */
diff --git a/include/jffs2/load_kernel.h b/include/jffs2/load_kernel.h
index 8b2720e..906eb3d 100644
--- a/include/jffs2/load_kernel.h
+++ b/include/jffs2/load_kernel.h
@@ -78,5 +78,6 @@ struct mtdids {
extern int mtdparts_init(void);
extern int find_dev_and_part(const char *id, struct mtd_device **dev,
u8 *part_num, struct part_info **part);
+extern struct mtd_device *device_find(u8 type, u8 num);
#endif /* load_kernel_h */
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index 4dcf90c..2d343c7 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -1,7 +1,7 @@
/*
* include/asm-ppc/mpc5xxx.h
*
- * Prototypes, etc. for the Motorola MGT5xxx/MPC5xxx
+ * Prototypes, etc. for the Motorola MPC5xxx
* embedded cpu chips
*
* 2003 (c) MontaVista, Software, Inc.
@@ -33,24 +33,15 @@
#include <asm/types.h>
/* Processor name */
-#if defined(CONFIG_MPC5200)
#define CPU_ID_STR "MPC5200"
-#elif defined(CONFIG_MGT5100)
-#define CPU_ID_STR "MGT5100"
-#endif
/* Exception offsets (PowerPC standard) */
#define EXC_OFF_SYS_RESET 0x0100
#define _START_OFFSET EXC_OFF_SYS_RESET
/* useful macros for manipulating CSx_START/STOP */
-#if defined(CONFIG_MGT5100)
-#define START_REG(start) ((start) >> 15)
-#define STOP_REG(start, size) (((start) + (size) - 1) >> 15)
-#elif defined(CONFIG_MPC5200)
#define START_REG(start) ((start) >> 16)
#define STOP_REG(start, size) (((start) + (size) - 1) >> 16)
-#endif
/* Internal memory map */
@@ -70,21 +61,12 @@
#define MPC5XXX_BOOTCS_STOP (CONFIG_SYS_MBAR + 0x0050)
#define MPC5XXX_ADDECR (CONFIG_SYS_MBAR + 0x0054)
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_SDRAM_START (CONFIG_SYS_MBAR + 0x0034)
-#define MPC5XXX_SDRAM_STOP (CONFIG_SYS_MBAR + 0x0038)
-#define MPC5XXX_PCI1_START (CONFIG_SYS_MBAR + 0x003c)
-#define MPC5XXX_PCI1_STOP (CONFIG_SYS_MBAR + 0x0040)
-#define MPC5XXX_PCI2_START (CONFIG_SYS_MBAR + 0x0044)
-#define MPC5XXX_PCI2_STOP (CONFIG_SYS_MBAR + 0x0048)
-#elif defined(CONFIG_MPC5200)
#define MPC5XXX_CS6_START (CONFIG_SYS_MBAR + 0x0058)
#define MPC5XXX_CS6_STOP (CONFIG_SYS_MBAR + 0x005c)
#define MPC5XXX_CS7_START (CONFIG_SYS_MBAR + 0x0060)
#define MPC5XXX_CS7_STOP (CONFIG_SYS_MBAR + 0x0064)
#define MPC5XXX_SDRAM_CS0CFG (CONFIG_SYS_MBAR + 0x0034)
#define MPC5XXX_SDRAM_CS1CFG (CONFIG_SYS_MBAR + 0x0038)
-#endif
#define MPC5XXX_SDRAM (CONFIG_SYS_MBAR + 0x0100)
#define MPC5XXX_CDM (CONFIG_SYS_MBAR + 0x0200)
@@ -99,18 +81,12 @@
#define MPC5XXX_SDMA (CONFIG_SYS_MBAR + 0x1200)
#define MPC5XXX_XLBARB (CONFIG_SYS_MBAR + 0x1f00)
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_PSC1 (CONFIG_SYS_MBAR + 0x2000)
-#define MPC5XXX_PSC2 (CONFIG_SYS_MBAR + 0x2400)
-#define MPC5XXX_PSC3 (CONFIG_SYS_MBAR + 0x2800)
-#elif defined(CONFIG_MPC5200)
#define MPC5XXX_PSC1 (CONFIG_SYS_MBAR + 0x2000)
#define MPC5XXX_PSC2 (CONFIG_SYS_MBAR + 0x2200)
#define MPC5XXX_PSC3 (CONFIG_SYS_MBAR + 0x2400)
#define MPC5XXX_PSC4 (CONFIG_SYS_MBAR + 0x2600)
#define MPC5XXX_PSC5 (CONFIG_SYS_MBAR + 0x2800)
#define MPC5XXX_PSC6 (CONFIG_SYS_MBAR + 0x2c00)
-#endif
#define MPC5XXX_FEC (CONFIG_SYS_MBAR + 0x3000)
#define MPC5XXX_ATA (CONFIG_SYS_MBAR + 0x3A00)
@@ -118,22 +94,14 @@
#define MPC5XXX_I2C1 (CONFIG_SYS_MBAR + 0x3D00)
#define MPC5XXX_I2C2 (CONFIG_SYS_MBAR + 0x3D40)
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_SRAM (CONFIG_SYS_MBAR + 0x4000)
-#define MPC5XXX_SRAM_SIZE (8*1024)
-#elif defined(CONFIG_MPC5200)
#define MPC5XXX_SRAM (CONFIG_SYS_MBAR + 0x8000)
#define MPC5XXX_SRAM_SIZE (16*1024)
-#endif
/* SDRAM Controller */
#define MPC5XXX_SDRAM_MODE (MPC5XXX_SDRAM + 0x0000)
#define MPC5XXX_SDRAM_CTRL (MPC5XXX_SDRAM + 0x0004)
#define MPC5XXX_SDRAM_CONFIG1 (MPC5XXX_SDRAM + 0x0008)
#define MPC5XXX_SDRAM_CONFIG2 (MPC5XXX_SDRAM + 0x000c)
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_SDRAM_XLBSEL (MPC5XXX_SDRAM + 0x0010)
-#endif
#define MPC5XXX_SDRAM_SDELAY (MPC5XXX_SDRAM + 0x0090)
/* Clock Distribution Module */
@@ -155,19 +123,15 @@
#define MPC5XXX_BOOTCS_CFG MPC5XXX_CS0_CFG
#define MPC5XXX_CS_CTRL (MPC5XXX_LPB + 0x0018)
#define MPC5XXX_CS_STATUS (MPC5XXX_LPB + 0x001c)
-#if defined(CONFIG_MPC5200)
#define MPC5XXX_CS6_CFG (MPC5XXX_LPB + 0x0020)
#define MPC5XXX_CS7_CFG (MPC5XXX_LPB + 0x0024)
#define MPC5XXX_CS_BURST (MPC5XXX_LPB + 0x0028)
#define MPC5XXX_CS_DEADCYCLE (MPC5XXX_LPB + 0x002c)
-#endif
-#if defined(CONFIG_MPC5200)
/* XLB Arbiter registers */
#define MPC5XXX_XLBARB_CFG (MPC5XXX_XLBARB + 0x40)
#define MPC5XXX_XLBARB_MPRIEN (MPC5XXX_XLBARB + 0x64)
#define MPC5XXX_XLBARB_MPRIVAL (MPC5XXX_XLBARB + 0x68)
-#endif
/* GPIO registers */
#define MPC5XXX_GPS_PORT_CONFIG (MPC5XXX_GPIO + 0x0000)
@@ -242,14 +206,6 @@
#define MPC5XXX_PCI_CFG (MPC5XXX_PCI + 0x0c)
#define MPC5XXX_PCI_BAR0 (MPC5XXX_PCI + 0x10)
#define MPC5XXX_PCI_BAR1 (MPC5XXX_PCI + 0x14)
-#if defined(CONFIG_MGT5100)
-#define MPC5XXX_PCI_CTRL (MPC5XXX_PCI + 0x68)
-#define MPC5XXX_PCI_VALMSKR (MPC5XXX_PCI + 0x6c)
-#define MPC5XXX_PCI_VALMSKW (MPC5XXX_PCI + 0x70)
-#define MPC5XXX_PCI_SUBW1 (MPC5XXX_PCI + 0x74)
-#define MPC5XXX_PCI_SUBW2 (MPC5XXX_PCI + 0x78)
-#define MPC5XXX_PCI_WINCOMMAND (MPC5XXX_PCI + 0x7c)
-#elif defined(CONFIG_MPC5200)
#define MPC5XXX_PCI_GSCR (MPC5XXX_PCI + 0x60)
#define MPC5XXX_PCI_TBATR0 (MPC5XXX_PCI + 0x64)
#define MPC5XXX_PCI_TBATR1 (MPC5XXX_PCI + 0x68)
@@ -262,7 +218,6 @@
#define MPC5XXX_PCI_ISR (MPC5XXX_PCI + 0x88)
#define MPC5XXX_PCI_ARB (MPC5XXX_PCI + 0x8c)
#define MPC5XXX_PCI_CAR (MPC5XXX_PCI + 0xf8)
-#endif
/* Interrupt Controller registers */
#define MPC5XXX_ICTL_PER_MASK (MPC5XXX_ICTL + 0x0000)
@@ -495,31 +450,16 @@ struct mpc5xxx_mmap_ctl {
volatile u32 cs4_stop;
volatile u32 cs5_start; /* 0x002c */
volatile u32 cs5_stop;
-#if defined(CONFIG_MGT5100)
- volatile u32 sdram_start; /* 0x0034 */
- volatile u32 sdram_stop; /* 0x0038 */
- volatile u32 pci1_start; /* 0x003c */
- volatile u32 pci1_stop; /* 0x0040 */
- volatile u32 pci2_start; /* 0x0044 */
- volatile u32 pci2_stop; /* 0x0048 */
-#elif defined(CONFIG_MPC5200)
volatile u32 sdram0; /* 0x0034 */
volatile u32 sdram1; /* 0x0038 */
volatile u32 dummy1[4]; /* 0x003c */
-#endif
volatile u32 boot_start; /* 0x004c */
volatile u32 boot_stop;
-#if defined(CONFIG_MGT5100)
- volatile u32 addecr; /* 0x0054 */
-#elif defined(CONFIG_MPC5200)
volatile u32 ipbi_ws_ctrl; /* 0x0054 */
-#endif
-#if defined(CONFIG_MPC5200)
volatile u32 cs6_start; /* 0x0058 */
volatile u32 cs6_stop;
volatile u32 cs7_start; /* 0x0060 */
volatile u32 cs7_stop;
-#endif
};
/* Clock distribution module */
@@ -546,12 +486,7 @@ struct mpc5xxx_sdram {
volatile u32 ctrl;
volatile u32 config1;
volatile u32 config2;
-#if defined(CONFIG_MGT5100)
- volatile u32 xlbsel;
- volatile u32 dummy[31];
-#else
volatile u32 dummy[32];
-#endif
volatile u32 sdelay;
};
@@ -564,12 +499,10 @@ struct mpc5xxx_lpb {
volatile u32 cs5_cfg;
volatile u32 cs_ctrl;
volatile u32 cs_status;
-#if defined(CONFIG_MPC5200)
volatile u32 cs6_cfg;
volatile u32 cs7_cfg;
volatile u32 cs_burst;
volatile u32 cs_deadcycle;
-#endif
};
diff --git a/include/mtd_node.h b/include/mtd_node.h
new file mode 100644
index 0000000..5aae085
--- /dev/null
+++ b/include/mtd_node.h
@@ -0,0 +1,11 @@
+#ifndef _NODE_INFO
+#define _NODE_INFO
+
+/*
+ * Info we use to search for a flash node in DTB.
+ */
+struct node_info {
+ const char *compat; /* compatible string */
+ int type; /* mtd flash type */
+};
+#endif
diff --git a/include/post.h b/include/post.h
index 9fcd3ce..ff83bce 100644
--- a/include/post.h
+++ b/include/post.h
@@ -53,6 +53,11 @@
#define POST_FAIL_SAVE 0x80
+#define POST_BEFORE 1
+#define POST_AFTER 0
+#define POST_PASSED 1
+#define POST_FAILED 0
+
#ifndef __ASSEMBLY__
struct post_test {
diff --git a/include/spartan3.h b/include/spartan3.h
index 30b1c2d..d5a589d 100644
--- a/include/spartan3.h
+++ b/include/spartan3.h
@@ -57,6 +57,7 @@ typedef struct {
Xilinx_done_fn done;
Xilinx_wr_fn wr;
Xilinx_post_fn post;
+ Xilinx_bwr_fn bwr; /* block write function */
} Xilinx_Spartan3_Slave_Serial_fns;
/* Device Image Sizes
diff --git a/include/xilinx.h b/include/xilinx.h
index d0799bc..2cb2e5b 100644
--- a/include/xilinx.h
+++ b/include/xilinx.h
@@ -100,5 +100,6 @@ typedef int (*Xilinx_busy_fn)( int cookie );
typedef int (*Xilinx_abort_fn)( int cookie );
typedef int (*Xilinx_pre_fn)( int cookie );
typedef int (*Xilinx_post_fn)( int cookie );
+typedef int (*Xilinx_bwr_fn)( void *buf, size_t len, int flush, int cookie );
#endif /* _XILINX_H_ */
diff --git a/lib_m68k/cache.c b/lib_m68k/cache.c
index 84fb6c2..ed88178 100644
--- a/lib_m68k/cache.c
+++ b/lib_m68k/cache.c
@@ -22,8 +22,129 @@
*/
#include <common.h>
+#include <asm/immap.h>
+#include <asm/cache.h>
-void flush_cache (ulong start_addr, ulong size)
+volatile int *cf_icache_status = (int *)ICACHE_STATUS;
+volatile int *cf_dcache_status = (int *)DCACHE_STATUS;
+
+void flush_cache(ulong start_addr, ulong size)
{
/* Must be implemented for all M68k processors with copy-back data cache */
}
+
+int icache_status(void)
+{
+ return *cf_icache_status;
+}
+
+int dcache_status(void)
+{
+ return *cf_dcache_status;
+}
+
+void icache_enable(void)
+{
+ icache_invalid();
+
+ *cf_icache_status = 1;
+
+#ifdef CONFIG_CF_V4
+ __asm__ __volatile__("movec %0, %%acr2"::"r"(CONFIG_SYS_CACHE_ACR2));
+ __asm__ __volatile__("movec %0, %%acr3"::"r"(CONFIG_SYS_CACHE_ACR3));
+#elif defined(CONFIG_CF_V4e)
+ __asm__ __volatile__("movec %0, %%acr6"::"r"(CONFIG_SYS_CACHE_ACR6));
+ __asm__ __volatile__("movec %0, %%acr7"::"r"(CONFIG_SYS_CACHE_ACR7));
+#else
+ __asm__ __volatile__("movec %0, %%acr0"::"r"(CONFIG_SYS_CACHE_ACR0));
+ __asm__ __volatile__("movec %0, %%acr1"::"r"(CONFIG_SYS_CACHE_ACR1));
+#endif
+
+ __asm__ __volatile__("movec %0, %%cacr"::"r"(CONFIG_SYS_CACHE_ICACR));
+}
+
+void icache_disable(void)
+{
+ u32 temp = 0;
+
+ *cf_icache_status = 0;
+ icache_invalid();
+
+#ifdef CONFIG_CF_V4
+ __asm__ __volatile__("movec %0, %%acr2"::"r"(temp));
+ __asm__ __volatile__("movec %0, %%acr3"::"r"(temp));
+#elif defined(CONFIG_CF_V4e)
+ __asm__ __volatile__("movec %0, %%acr6"::"r"(temp));
+ __asm__ __volatile__("movec %0, %%acr7"::"r"(temp));
+#else
+ __asm__ __volatile__("movec %0, %%acr0"::"r"(temp));
+ __asm__ __volatile__("movec %0, %%acr1"::"r"(temp));
+
+#endif
+}
+
+void icache_invalid(void)
+{
+ u32 temp;
+
+ temp = CONFIG_SYS_ICACHE_INV;
+ if (*cf_icache_status)
+ temp |= CONFIG_SYS_CACHE_ICACR;
+
+ __asm__ __volatile__("movec %0, %%cacr"::"r"(temp));
+}
+
+/*
+ * data cache only for ColdFire V4 such as MCF547x_8x, MCF5445x
+ * the dcache will be dummy in ColdFire V2 and V3
+ */
+void dcache_enable(void)
+{
+ dcache_invalid();
+ *cf_dcache_status = 1;
+
+#ifdef CONFIG_CF_V4
+ __asm__ __volatile__("movec %0, %%acr0"::"r"(CONFIG_SYS_CACHE_ACR0));
+ __asm__ __volatile__("movec %0, %%acr1"::"r"(CONFIG_SYS_CACHE_ACR1));
+#elif defined(CONFIG_CF_V4e)
+ __asm__ __volatile__("movec %0, %%acr4"::"r"(CONFIG_SYS_CACHE_ACR4));
+ __asm__ __volatile__("movec %0, %%acr5"::"r"(CONFIG_SYS_CACHE_ACR5));
+
+#endif
+
+ __asm__ __volatile__("movec %0, %%cacr"::"r"(CONFIG_SYS_CACHE_DCACR));
+}
+
+void dcache_disable(void)
+{
+ u32 temp = 0;
+
+ *cf_dcache_status = 0;
+ dcache_invalid();
+
+ __asm__ __volatile__("movec %0, %%cacr"::"r"(temp));
+
+#ifdef CONFIG_CF_V4
+ __asm__ __volatile__("movec %0, %%acr0"::"r"(temp));
+ __asm__ __volatile__("movec %0, %%acr1"::"r"(temp));
+#elif defined(CONFIG_CF_V4e)
+ __asm__ __volatile__("movec %0, %%acr4"::"r"(temp));
+ __asm__ __volatile__("movec %0, %%acr5"::"r"(temp));
+
+#endif
+}
+
+void dcache_invalid(void)
+{
+#ifdef CONFIG_CF_V4
+ u32 temp;
+
+ temp = CONFIG_SYS_DCACHE_INV;
+ if (*cf_dcache_status)
+ temp |= CONFIG_SYS_CACHE_DCACR;
+ if (*cf_icache_status)
+ temp |= CONFIG_SYS_CACHE_ICACR;
+
+ __asm__ __volatile__("movec %0, %%cacr"::"r"(temp));
+#endif
+}
diff --git a/post/post.c b/post/post.c
index b29eb87..00e8353 100644
--- a/post/post.c
+++ b/post/post.c
@@ -231,6 +231,12 @@ static void post_get_flags (int *test_flags)
}
}
+void __show_post_progress (unsigned int test_num, int before, int result)
+{
+}
+void show_post_progress (unsigned int, int, int)
+ __attribute__((weak, alias("__show_post_progress")));
+
static int post_run_single (struct post_test *test,
int test_flags, int flags, unsigned int i)
{
@@ -248,13 +254,18 @@ static int post_run_single (struct post_test *test,
if (test_flags & POST_PREREL)
post_log_mark_start ( test->testid );
else
- post_log ("POST %s ", test->cmd);
+ post_log ("POST %s ", test->cmd);
}
+ show_post_progress(i, POST_BEFORE, POST_FAILED);
+
if (test_flags & POST_PREREL) {
- if ((*test->test) (flags) == 0)
+ if ((*test->test) (flags) == 0) {
post_log_mark_succ ( test->testid );
+ show_post_progress(i, POST_AFTER, POST_PASSED);
+ }
else {
+ show_post_progress(i, POST_AFTER, POST_FAILED);
if (test_flags & POST_CRITICAL)
gd->flags |= GD_FLG_POSTFAIL;
if (test_flags & POST_STOP)
@@ -264,6 +275,7 @@ static int post_run_single (struct post_test *test,
if ((*test->test) (flags) != 0) {
post_log ("FAILED\n");
show_boot_progress (-32);
+ show_post_progress(i, POST_AFTER, POST_FAILED);
if (test_flags & POST_CRITICAL)
gd->flags |= GD_FLG_POSTFAIL;
if (test_flags & POST_STOP)
@@ -271,6 +283,7 @@ static int post_run_single (struct post_test *test,
}
else
post_log ("PASSED\n");
+ show_post_progress(i, POST_AFTER, POST_PASSED);
}
if ((test_flags & POST_REBOOT) && !(flags & POST_MANUAL)) {