diff options
| -rw-r--r-- | README | 5 | ||||
| -rw-r--r-- | drivers/mtd/nand/nand_spl_simple.c | 43 |
2 files changed, 47 insertions, 1 deletions
@@ -3257,6 +3257,11 @@ Low Level (hardware related) configuration options: that is executed before the actual U-Boot. E.g. when compiling a NAND SPL. +- CONFIG_SYS_NAND_HW_ECC_OOBFIRST + define this, if you want to read first the oob data + and then the data. This is used for example on + davinci plattforms. + - CONFIG_USE_ARCH_MEMCPY CONFIG_USE_ARCH_MEMSET If these options are used a optimized version of memcpy/memset will diff --git a/drivers/mtd/nand/nand_spl_simple.c b/drivers/mtd/nand/nand_spl_simple.c index 71491d4..e5003e6 100644 --- a/drivers/mtd/nand/nand_spl_simple.c +++ b/drivers/mtd/nand/nand_spl_simple.c @@ -140,6 +140,47 @@ static int nand_is_bad_block(int block) return 0; } +#if defined(CONFIG_SYS_NAND_HW_ECC_OOBFIRST) +static int nand_read_page(int block, int page, uchar *dst) +{ + struct nand_chip *this = mtd.priv; + u_char *ecc_calc; + u_char *ecc_code; + u_char *oob_data; + int i; + int eccsize = CONFIG_SYS_NAND_ECCSIZE; + int eccbytes = CONFIG_SYS_NAND_ECCBYTES; + int eccsteps = CONFIG_SYS_NAND_ECCSTEPS; + uint8_t *p = dst; + int stat; + + /* + * No malloc available for now, just use some temporary locations + * in SDRAM + */ + ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000); + ecc_code = ecc_calc + 0x100; + oob_data = ecc_calc + 0x200; + + nand_command(block, page, 0, NAND_CMD_READOOB); + this->read_buf(&mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE); + nand_command(block, page, 0, NAND_CMD_READ0); + + /* Pick the ECC bytes out of the oob data */ + for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++) + ecc_code[i] = oob_data[nand_ecc_pos[i]]; + + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + this->ecc.hwctl(&mtd, NAND_ECC_READ); + this->read_buf(&mtd, p, eccsize); + this->ecc.calculate(&mtd, p, &ecc_calc[i]); + stat = this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]); + } + + return 0; +} +#else static int nand_read_page(int block, int page, void *dst) { struct nand_chip *this = mtd.priv; @@ -186,6 +227,7 @@ static int nand_read_page(int block, int page, void *dst) return 0; } +#endif int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst) { @@ -230,7 +272,6 @@ void nand_init(void) mtd.priv = &nand_chip; nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE; - nand_chip.options = 0; board_nand_init(&nand_chip); if (nand_chip.select_chip) |