diff options
| -rw-r--r-- | drivers/serial/serial_pl01x.c | 93 |
1 files changed, 38 insertions, 55 deletions
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index c645cef..c0ae947 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -29,25 +29,23 @@ #include <common.h> #include <watchdog.h> - +#include <asm/io.h> #include "serial_pl01x.h" -#define IO_WRITE(addr, val) (*(volatile unsigned int *)(addr) = (val)) -#define IO_READ(addr) (*(volatile unsigned int *)(addr)) - /* * Integrator AP has two UARTs, we use the first one, at 38400-8-N-1 * Integrator CP has two UARTs, use the first one, at 38400-8-N-1 * Versatile PB has four UARTs. */ #define CONSOLE_PORT CONFIG_CONS_INDEX -#define baudRate CONFIG_BAUDRATE static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS; #define NUM_PORTS (sizeof(port)/sizeof(port[0])) static void pl01x_putc (int portnum, char c); static int pl01x_getc (int portnum); static int pl01x_tstc (int portnum); +unsigned int baudrate = CONFIG_BAUDRATE; +DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_PL010_SERIAL @@ -55,16 +53,11 @@ int serial_init (void) { unsigned int divisor; - /* - ** First, disable everything. - */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, 0x0); + /* First, disable everything */ + writel(0x0, port[CONSOLE_PORT] + UART_PL010_CR); - /* - ** Set baud rate - ** - */ - switch (baudRate) { + /* Set baud rate */ + switch (baudrate) { case 9600: divisor = UART_PL010_BAUD_9600; break; @@ -89,20 +82,15 @@ int serial_init (void) divisor = UART_PL010_BAUD_38400; } - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRM, - ((divisor & 0xf00) >> 8)); - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff)); + writel(((divisor & 0xf00) >> 8), port[CONSOLE_PORT] + UART_PL010_LCRM); + writel((divisor & 0xff), port[CONSOLE_PORT] + UART_PL010_LCRL); - /* - ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. - */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRH, - (UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN)); + /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */ + writel((UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN), + port[CONSOLE_PORT] + UART_PL010_LCRH); - /* - ** Finally, enable the UART - */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN)); + /* Finally, enable the UART */ + writel((UART_PL010_CR_UARTEN), port[CONSOLE_PORT] + UART_PL010_CR); return 0; } @@ -118,38 +106,31 @@ int serial_init (void) unsigned int remainder; unsigned int fraction; - /* - ** First, disable everything. - */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, 0x0); + /* First, disable everything */ + writel(0x0, port[CONSOLE_PORT] + UART_PL011_CR); /* - ** Set baud rate - ** - ** IBRD = UART_CLK / (16 * BAUD_RATE) - ** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE)) + * Set baud rate + * + * IBRD = UART_CLK / (16 * BAUD_RATE) + * FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE)) */ - temp = 16 * baudRate; + temp = 16 * baudrate; divider = CONFIG_PL011_CLOCK / temp; remainder = CONFIG_PL011_CLOCK % temp; - temp = (8 * remainder) / baudRate; + temp = (8 * remainder) / baudrate; fraction = (temp >> 1) + (temp & 1); - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_IBRD, divider); - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_FBRD, fraction); + writel(divider, port[CONSOLE_PORT] + UART_PL011_IBRD); + writel(fraction, port[CONSOLE_PORT] + UART_PL011_FBRD); - /* - ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. - */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_LCRH, - (UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN)); + /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */ + writel((UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN), + port[CONSOLE_PORT] + UART_PL011_LCRH); - /* - ** Finally, enable the UART - */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, - (UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | - UART_PL011_CR_RXE)); + /* Finally, enable the UART */ + writel((UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE), + port[CONSOLE_PORT] + UART_PL011_CR); return 0; } @@ -183,16 +164,18 @@ int serial_tstc (void) void serial_setbrg (void) { + baudrate = gd->baudrate; + serial_init(); } static void pl01x_putc (int portnum, char c) { /* Wait until there is space in the FIFO */ - while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF) + while (readl(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF) WATCHDOG_RESET(); /* Send the character */ - IO_WRITE (port[portnum] + UART_PL01x_DR, c); + writel(c, port[portnum] + UART_PL01x_DR); } static int pl01x_getc (int portnum) @@ -200,15 +183,15 @@ static int pl01x_getc (int portnum) unsigned int data; /* Wait until there is data in the FIFO */ - while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE) + while (readl(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE) WATCHDOG_RESET(); - data = IO_READ (port[portnum] + UART_PL01x_DR); + data = readl(port[portnum] + UART_PL01x_DR); /* Check for an error flag */ if (data & 0xFFFFFF00) { /* Clear the error */ - IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF); + writel(0xFFFFFFFF, port[portnum] + UART_PL01x_ECR); return -1; } @@ -218,6 +201,6 @@ static int pl01x_getc (int portnum) static int pl01x_tstc (int portnum) { WATCHDOG_RESET(); - return !(IO_READ (port[portnum] + UART_PL01x_FR) & + return !(readl(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE); } |