diff options
| -rw-r--r-- | Makefile | 1 | ||||
| -rw-r--r-- | drivers/usb/ulpi/Makefile | 44 | ||||
| -rw-r--r-- | drivers/usb/ulpi/ulpi-viewport.c | 118 | ||||
| -rw-r--r-- | drivers/usb/ulpi/ulpi.c | 227 | ||||
| -rw-r--r-- | include/usb/ulpi.h | 298 |
5 files changed, 688 insertions, 0 deletions
@@ -286,6 +286,7 @@ LIBS += drivers/usb/gadget/libusb_gadget.o LIBS += drivers/usb/host/libusb_host.o LIBS += drivers/usb/musb/libusb_musb.o LIBS += drivers/usb/phy/libusb_phy.o +LIBS += drivers/usb/ulpi/libusb_ulpi.o LIBS += drivers/video/libvideo.o LIBS += drivers/watchdog/libwatchdog.o LIBS += common/libcommon.o diff --git a/drivers/usb/ulpi/Makefile b/drivers/usb/ulpi/Makefile new file mode 100644 index 0000000..d43b229 --- /dev/null +++ b/drivers/usb/ulpi/Makefile @@ -0,0 +1,44 @@ +# +# Copyright (C) 2011 Jana Rapava <fermata7@gmail.com> +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc. +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libusb_ulpi.o + +COBJS-$(CONFIG_USB_ULPI) += ulpi.o +COBJS-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi-viewport.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/usb/ulpi/ulpi-viewport.c b/drivers/usb/ulpi/ulpi-viewport.c new file mode 100644 index 0000000..fa2e004 --- /dev/null +++ b/drivers/usb/ulpi/ulpi-viewport.c @@ -0,0 +1,118 @@ +/* + * Copyright (C) 2011 Jana Rapava <fermata7@gmail.com> + * Copyright (C) 2011 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Jana Rapava <fermata7@gmail.com> + * Igor Grinberg <grinberg@compulab.co.il> + * + * Based on: + * linux/drivers/usb/otg/ulpi_viewport.c + * + * Original Copyright follow: + * Copyright (C) 2011 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <common.h> +#include <asm/io.h> +#include <usb/ulpi.h> + +/* ULPI viewport control bits */ +#define ULPI_SS (1 << 27) +#define ULPI_RWCTRL (1 << 29) +#define ULPI_RWRUN (1 << 30) +#define ULPI_WU (1 << 31) + +/* + * Wait for the ULPI request to complete + * + * @ulpi_viewport - the address of the viewport + * @mask - expected value to wait for + * + * returns 0 on mask match, ULPI_ERROR on time out. + */ +static int ulpi_wait(u32 ulpi_viewport, u32 mask) +{ + int timeout = CONFIG_USB_ULPI_TIMEOUT; + + /* Wait for the bits in mask to become zero. */ + while (--timeout) { + if ((readl(ulpi_viewport) & mask) == 0) + return 0; + + udelay(1); + } + + return ULPI_ERROR; +} + +/* + * Wake the ULPI PHY up for communication + * + * returns 0 on success. + */ +static int ulpi_wakeup(u32 ulpi_viewport) +{ + int err; + + if (readl(ulpi_viewport) & ULPI_SS) + return 0; /* already awake */ + + writel(ULPI_WU, ulpi_viewport); + + err = ulpi_wait(ulpi_viewport, ULPI_WU); + if (err) + printf("ULPI wakeup timed out\n"); + + return err; +} + +/* + * Issue a ULPI read/write request + * + * @value - the ULPI request + */ +static int ulpi_request(u32 ulpi_viewport, u32 value) +{ + int err; + + err = ulpi_wakeup(ulpi_viewport); + if (err) + return err; + + writel(value, ulpi_viewport); + + err = ulpi_wait(ulpi_viewport, ULPI_RWRUN); + if (err) + printf("ULPI request timed out\n"); + + return err; +} + +u32 ulpi_write(u32 ulpi_viewport, u8 *reg, u32 value) +{ + u32 val = ULPI_RWRUN | ULPI_RWCTRL | ((u32)reg << 16) | (value & 0xff); + + return ulpi_request(ulpi_viewport, val); +} + +u32 ulpi_read(u32 ulpi_viewport, u8 *reg) +{ + u32 err; + u32 val = ULPI_RWRUN | ((u32)reg << 16); + + err = ulpi_request(ulpi_viewport, val); + if (err) + return err; + + return (readl(ulpi_viewport) >> 8) & 0xff; +} diff --git a/drivers/usb/ulpi/ulpi.c b/drivers/usb/ulpi/ulpi.c new file mode 100644 index 0000000..805e29d --- /dev/null +++ b/drivers/usb/ulpi/ulpi.c @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2011 Jana Rapava <fermata7@gmail.com> + * Copyright (C) 2011 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Jana Rapava <fermata7@gmail.com> + * Igor Grinberg <grinberg@compulab.co.il> + * + * Based on: + * linux/drivers/usb/otg/ulpi.c + * Generic ULPI USB transceiver support + * + * Original Copyright follow: + * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> + * + * Based on sources from + * + * Sascha Hauer <s.hauer@pengutronix.de> + * Freescale Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <exports.h> +#include <usb/ulpi.h> + +#define ULPI_ID_REGS_COUNT 4 +#define ULPI_TEST_VALUE 0x55 /* 0x55 == 0b01010101 */ + +static struct ulpi_regs *ulpi = (struct ulpi_regs *)0; + +static int ulpi_integrity_check(u32 ulpi_viewport) +{ + u32 err, val, tval = ULPI_TEST_VALUE; + int i; + + /* Use the 'special' test value to check all bits */ + for (i = 0; i < 2; i++, tval <<= 1) { + err = ulpi_write(ulpi_viewport, &ulpi->scratch, tval); + if (err) + return err; + + val = ulpi_read(ulpi_viewport, &ulpi->scratch); + if (val != tval) { + printf("ULPI integrity check failed\n"); + return val; + } + } + + return 0; +} + +int ulpi_init(u32 ulpi_viewport) +{ + u32 val, id = 0; + u8 *reg = &ulpi->product_id_high; + int i; + + /* Assemble ID from four ULPI ID registers (8 bits each). */ + for (i = 0; i < ULPI_ID_REGS_COUNT; i++) { + val = ulpi_read(ulpi_viewport, reg - i); + if (val == ULPI_ERROR) + return val; + + id = (id << 8) | val; + } + + /* Split ID into vendor and product ID. */ + debug("ULPI transceiver ID 0x%04x:0x%04x\n", id >> 16, id & 0xffff); + + return ulpi_integrity_check(ulpi_viewport); +} + +int ulpi_select_transceiver(u32 ulpi_viewport, u8 speed) +{ + u8 tspeed = ULPI_FC_FULL_SPEED; + u32 val; + + switch (speed) { + case ULPI_FC_HIGH_SPEED: + case ULPI_FC_FULL_SPEED: + case ULPI_FC_LOW_SPEED: + case ULPI_FC_FS4LS: + tspeed = speed; + break; + default: + printf("ULPI: %s: wrong transceiver speed specified, " + "falling back to full speed\n", __func__); + } + + val = ulpi_read(ulpi_viewport, &ulpi->function_ctrl); + if (val == ULPI_ERROR) + return val; + + /* clear the previous speed setting */ + val = (val & ~ULPI_FC_XCVRSEL_MASK) | tspeed; + + return ulpi_write(ulpi_viewport, &ulpi->function_ctrl, val); +} + +int ulpi_set_vbus(u32 ulpi_viewport, int on, int ext_power, int ext_ind) +{ + u32 flags = ULPI_OTG_DRVVBUS; + u8 *reg = on ? &ulpi->otg_ctrl_set : &ulpi->otg_ctrl_clear; + + if (ext_power) + flags |= ULPI_OTG_DRVVBUS_EXT; + if (ext_ind) + flags |= ULPI_OTG_EXTVBUSIND; + + return ulpi_write(ulpi_viewport, reg, flags); +} + +int ulpi_set_pd(u32 ulpi_viewport, int enable) +{ + u32 val = ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN; + u8 *reg = enable ? &ulpi->otg_ctrl_set : &ulpi->otg_ctrl_clear; + + return ulpi_write(ulpi_viewport, reg, val); +} + +int ulpi_opmode_sel(u32 ulpi_viewport, u8 opmode) +{ + u8 topmode = ULPI_FC_OPMODE_NORMAL; + u32 val; + + switch (opmode) { + case ULPI_FC_OPMODE_NORMAL: + case ULPI_FC_OPMODE_NONDRIVING: + case ULPI_FC_OPMODE_DISABLE_NRZI: + case ULPI_FC_OPMODE_NOSYNC_NOEOP: + topmode = opmode; + break; + default: + printf("ULPI: %s: wrong OpMode specified, " + "falling back to OpMode Normal\n", __func__); + } + + val = ulpi_read(ulpi_viewport, &ulpi->function_ctrl); + if (val == ULPI_ERROR) + return val; + + /* clear the previous opmode setting */ + val = (val & ~ULPI_FC_OPMODE_MASK) | topmode; + + return ulpi_write(ulpi_viewport, &ulpi->function_ctrl, val); +} + +int ulpi_serial_mode_enable(u32 ulpi_viewport, u8 smode) +{ + switch (smode) { + case ULPI_IFACE_6_PIN_SERIAL_MODE: + case ULPI_IFACE_3_PIN_SERIAL_MODE: + break; + default: + printf("ULPI: %s: unrecognized Serial Mode specified\n", + __func__); + return ULPI_ERROR; + } + + return ulpi_write(ulpi_viewport, &ulpi->iface_ctrl_set, smode); +} + +int ulpi_suspend(u32 ulpi_viewport) +{ + u32 err; + + err = ulpi_write(ulpi_viewport, &ulpi->function_ctrl_clear, + ULPI_FC_SUSPENDM); + if (err) + printf("ULPI: %s: failed writing the suspend bit\n", __func__); + + return err; +} + +/* + * Wait for ULPI PHY reset to complete. + * Actual wait for reset must be done in a view port specific way, + * because it involves checking the DIR line. + */ +static int __ulpi_reset_wait(u32 ulpi_viewport) +{ + u32 val; + int timeout = CONFIG_USB_ULPI_TIMEOUT; + + /* Wait for the RESET bit to become zero */ + while (--timeout) { + /* + * This function is generic and suppose to work + * with any viewport, so we cheat here and don't check + * for the error of ulpi_read(), if there is one, then + * there will be a timeout. + */ + val = ulpi_read(ulpi_viewport, &ulpi->function_ctrl); + if (!(val & ULPI_FC_RESET)) + return 0; + + udelay(1); + } + + printf("ULPI: %s: reset timed out\n", __func__); + + return ULPI_ERROR; +} +int ulpi_reset_wait(u32) __attribute__((weak, alias("__ulpi_reset_wait"))); + +int ulpi_reset(u32 ulpi_viewport) +{ + u32 err; + + err = ulpi_write(ulpi_viewport, + &ulpi->function_ctrl_set, ULPI_FC_RESET); + if (err) { + printf("ULPI: %s: failed writing reset bit\n", __func__); + return err; + } + + return ulpi_reset_wait(ulpi_viewport); +} diff --git a/include/usb/ulpi.h b/include/usb/ulpi.h new file mode 100644 index 0000000..d871290 --- /dev/null +++ b/include/usb/ulpi.h @@ -0,0 +1,298 @@ +/* + * Generic ULPI interface. + * + * Copyright (C) 2011 Jana Rapava <fermata7@gmail.com> + * Copyright (C) 2011 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Jana Rapava <fermata7@gmail.com> + * Igor Grinberg <grinberg@compulab.co.il> + * + * Register offsets taken from: + * linux/include/linux/usb/ulpi.h + * + * Original Copyrights follow: + * Copyright (C) 2010 Nokia Corporation + * + * This software is distributed under the terms of the GNU General + * Public License ("GPL") as published by the Free Software Foundation, + * version 2 of that License. + */ + +#ifndef __USB_ULPI_H__ +#define __USB_ULPI_H__ + +#define ULPI_ERROR (1 << 8) /* overflow from any register value */ + +#ifndef CONFIG_USB_ULPI_TIMEOUT +#define CONFIG_USB_ULPI_TIMEOUT 1000 /* timeout in us */ +#endif + +/* + * Initialize the ULPI transciever and check the interface integrity. + * @ulpi_viewport - the address of the ULPI viewport register. + * + * returns 0 on success, ULPI_ERROR on failure. + */ +int ulpi_init(u32 ulpi_viewport); + +/* + * Select transceiver speed. + * @speed - ULPI_FC_HIGH_SPEED, ULPI_FC_FULL_SPEED (default), + * ULPI_FC_LOW_SPEED, ULPI_FC_FS4LS + * returns 0 on success, ULPI_ERROR on failure. + */ +int ulpi_select_transceiver(u32 ulpi_viewport, u8 speed); + +/* + * Enable/disable VBUS. + * @ext_power - external VBUS supply is used (default is false) + * @ext_indicator - external VBUS over-current indicator is used + * + * returns 0 on success, ULPI_ERROR on failure. + */ +int ulpi_enable_vbus(u32 ulpi_viewport, int on, int ext_power, int ext_ind); + +/* + * Enable/disable pull-down resistors on D+ and D- USB lines. + * + * returns 0 on success, ULPI_ERROR on failure. + */ +int ulpi_set_pd(u32 ulpi_viewport, int enable); + +/* + * Select OpMode. + * @opmode - ULPI_FC_OPMODE_NORMAL (default), ULPI_FC_OPMODE_NONDRIVING, + * ULPI_FC_OPMODE_DISABLE_NRZI, ULPI_FC_OPMODE_NOSYNC_NOEOP + * + * returns 0 on success, ULPI_ERROR on failure. + */ +int ulpi_opmode_sel(u32 ulpi_viewport, u8 opmode); + +/* + * Switch to Serial Mode. + * @smode - ULPI_IFACE_6_PIN_SERIAL_MODE or ULPI_IFACE_3_PIN_SERIAL_MODE + * + * returns 0 on success, ULPI_ERROR on failure. + * + * Notes: + * Switches immediately to Serial Mode. + * To return from Serial Mode, STP line needs to be asserted. + */ +int ulpi_serial_mode_enable(u32 ulpi_viewport, u8 smode); + +/* + * Put PHY into low power mode. + * + * returns 0 on success, ULPI_ERROR on failure. + * + * Notes: + * STP line must be driven low to keep the PHY in suspend. + * To resume the PHY, STP line needs to be asserted. + */ +int ulpi_suspend(u32 ulpi_viewport); + +/* + * Reset the transceiver. ULPI interface and registers are not affected. + * + * returns 0 on success, ULPI_ERROR on failure. + */ +int ulpi_reset(u32 ulpi_viewport); + + +/* ULPI access methods below must be implemented for each ULPI viewport. */ + +/* + * Write to the ULPI PHY register via the viewport. + * @reg - the ULPI register (one of the fields in struct ulpi_regs). + * @value - the value - only 8 lower bits are used, others ignored. + * + * returns 0 on success, ULPI_ERROR on failure. + */ +u32 ulpi_write(u32 ulpi_viewport, u8 *reg, u32 value); + +/* + * Read the ULPI PHY register content via the viewport. + * @reg - the ULPI register (one of the fields in struct ulpi_regs). + * + * returns register content on success, ULPI_ERROR on failure. + */ +u32 ulpi_read(u32 ulpi_viewport, u8 *reg); + +/* + * Wait for the reset to complete. + * The Link must not attempt to access the PHY until the reset has + * completed and DIR line is de-asserted. + */ +int ulpi_reset_wait(u32 ulpi_viewport); + +/* Access Extended Register Set (indicator) */ +#define ACCESS_EXT_REGS_OFFSET 0x2f /* read-write */ +/* Vendor-specific */ +#define VENDOR_SPEC_OFFSET 0x30 + +/* + * Extended Register Set + * + * Addresses 0x00-0x3F map directly to Immediate Register Set. + * Addresses 0x40-0x7F are reserved. + * Addresses 0x80-0xff are vendor-specific. + */ +#define EXT_VENDOR_SPEC_OFFSET 0x80 + +/* ULPI registers, bits and offsets definitions */ +struct ulpi_regs { + /* Vendor ID and Product ID: 0x00 - 0x03 Read-only */ + u8 vendor_id_low; + u8 vendor_id_high; + u8 product_id_low; + u8 product_id_high; + /* Function Control: 0x04 - 0x06 Read */ + u8 function_ctrl; /* 0x04 Write */ + u8 function_ctrl_set; /* 0x05 Set */ + u8 function_ctrl_clear; /* 0x06 Clear */ + /* Interface Control: 0x07 - 0x09 Read */ + u8 iface_ctrl; /* 0x07 Write */ + u8 iface_ctrl_set; /* 0x08 Set */ + u8 iface_ctrl_clear; /* 0x09 Clear */ + /* OTG Control: 0x0A - 0x0C Read */ + u8 otg_ctrl; /* 0x0A Write */ + u8 otg_ctrl_set; /* 0x0B Set */ + u8 otg_ctrl_clear; /* 0x0C Clear */ + /* USB Interrupt Enable Rising: 0x0D - 0x0F Read */ + u8 usb_ie_rising; /* 0x0D Write */ + u8 usb_ie_rising_set; /* 0x0E Set */ + u8 usb_ie_rising_clear; /* 0x0F Clear */ + /* USB Interrupt Enable Falling: 0x10 - 0x12 Read */ + u8 usb_ie_falling; /* 0x10 Write */ + u8 usb_ie_falling_set; /* 0x11 Set */ + u8 usb_ie_falling_clear; /* 0x12 Clear */ + /* USB Interrupt Status: 0x13 Read-only */ + u8 usb_int_status; + /* USB Interrupt Latch: 0x14 Read-only with auto-clear */ + u8 usb_int_latch; + /* Debug: 0x15 Read-only */ + u8 debug; + /* Scratch Register: 0x16 - 0x18 Read */ + u8 scratch; /* 0x16 Write */ + u8 scratch_set; /* 0x17 Set */ + u8 scratch_clear; /* 0x18 Clear */ + /* + * Optional Carkit registers: + * Carkit Control: 0x19 - 0x1B Read + */ + u8 carkit_ctrl; /* 0x19 Write */ + u8 carkit_ctrl_set; /* 0x1A Set */ + u8 carkit_ctrl_clear; /* 0x1B Clear */ + /* Carkit Interrupt Delay: 0x1C Read, Write */ + u8 carkit_int_delay; + /* Carkit Interrupt Enable: 0x1D - 0x1F Read */ + u8 carkit_ie; /* 0x1D Write */ + u8 carkit_ie_set; /* 0x1E Set */ + u8 carkit_ie_clear; /* 0x1F Clear */ + /* Carkit Interrupt Status: 0x20 Read-only */ + u8 carkit_int_status; + /* Carkit Interrupt Latch: 0x21 Read-only with auto-clear */ + u8 carkit_int_latch; + /* Carkit Pulse Control: 0x22 - 0x24 Read */ + u8 carkit_pulse_ctrl; /* 0x22 Write */ + u8 carkit_pulse_ctrl_set; /* 0x23 Set */ + u8 carkit_pulse_ctrl_clear; /* 0x24 Clear */ + /* + * Other optional registers: + * Transmit Positive Width: 0x25 Read, Write + */ + u8 transmit_pos_width; + /* Transmit Negative Width: 0x26 Read, Write */ + u8 transmit_neg_width; + /* Receive Polarity Recovery: 0x27 Read, Write */ + u8 recv_pol_recovery; + /* + * Addresses 0x28 - 0x2E are reserved, so we use offsets + * for immediate registers with higher addresses + */ +}; + +/* + * Register Bits + */ + +/* Function Control */ +#define ULPI_FC_XCVRSEL_MASK (3 << 0) +#define ULPI_FC_HIGH_SPEED (0 << 0) +#define ULPI_FC_FULL_SPEED (1 << 0) +#define ULPI_FC_LOW_SPEED (2 << 0) +#define ULPI_FC_FS4LS (3 << 0) +#define ULPI_FC_TERMSELECT (1 << 2) +#define ULPI_FC_OPMODE_MASK (3 << 3) +#define ULPI_FC_OPMODE_NORMAL (0 << 3) +#define ULPI_FC_OPMODE_NONDRIVING (1 << 3) +#define ULPI_FC_OPMODE_DISABLE_NRZI (2 << 3) +#define ULPI_FC_OPMODE_NOSYNC_NOEOP (3 << 3) +#define ULPI_FC_RESET (1 << 5) +#define ULPI_FC_SUSPENDM (1 << 6) + +/* Interface Control */ +#define ULPI_IFACE_6_PIN_SERIAL_MODE (1 << 0) +#define ULPI_IFACE_3_PIN_SERIAL_MODE (1 << 1) +#define ULPI_IFACE_CARKITMODE (1 << 2) +#define ULPI_IFACE_CLOCKSUSPENDM (1 << 3) +#define ULPI_IFACE_AUTORESUME (1 << 4) +#define ULPI_IFACE_EXTVBUS_COMPLEMENT (1 << 5) +#define ULPI_IFACE_PASSTHRU (1 << 6) +#define ULPI_IFACE_PROTECT_IFC_DISABLE (1 << 7) + +/* OTG Control */ +#define ULPI_OTG_ID_PULLUP (1 << 0) +#define ULPI_OTG_DP_PULLDOWN (1 << 1) +#define ULPI_OTG_DM_PULLDOWN (1 << 2) +#define ULPI_OTG_DISCHRGVBUS (1 << 3) +#define ULPI_OTG_CHRGVBUS (1 << 4) +#define ULPI_OTG_DRVVBUS (1 << 5) +#define ULPI_OTG_DRVVBUS_EXT (1 << 6) +#define ULPI_OTG_EXTVBUSIND (1 << 7) + +/* + * USB Interrupt Enable Rising, + * USB Interrupt Enable Falling, + * USB Interrupt Status and + * USB Interrupt Latch + */ +#define ULPI_INT_HOST_DISCONNECT (1 << 0) +#define ULPI_INT_VBUS_VALID (1 << 1) +#define ULPI_INT_SESS_VALID (1 << 2) +#define ULPI_INT_SESS_END (1 << 3) +#define ULPI_INT_IDGRD (1 << 4) + +/* Debug */ +#define ULPI_DEBUG_LINESTATE0 (1 << 0) +#define ULPI_DEBUG_LINESTATE1 (1 << 1) + +/* Carkit Control */ +#define ULPI_CARKIT_CTRL_CARKITPWR (1 << 0) +#define ULPI_CARKIT_CTRL_IDGNDDRV (1 << 1) +#define ULPI_CARKIT_CTRL_TXDEN (1 << 2) +#define ULPI_CARKIT_CTRL_RXDEN (1 << 3) +#define ULPI_CARKIT_CTRL_SPKLEFTEN (1 << 4) +#define ULPI_CARKIT_CTRL_SPKRIGHTEN (1 << 5) +#define ULPI_CARKIT_CTRL_MICEN (1 << 6) + +/* Carkit Interrupt Enable */ +#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE (1 << 0) +#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL (1 << 1) +#define ULPI_CARKIT_INT_EN_CARINTDET (1 << 2) +#define ULPI_CARKIT_INT_EN_DP_RISE (1 << 3) +#define ULPI_CARKIT_INT_EN_DP_FALL (1 << 4) + +/* Carkit Interrupt Status and Latch */ +#define ULPI_CARKIT_INT_IDFLOAT (1 << 0) +#define ULPI_CARKIT_INT_CARINTDET (1 << 1) +#define ULPI_CARKIT_INT_DP (1 << 2) + +/* Carkit Pulse Control*/ +#define ULPI_CARKIT_PLS_CTRL_TXPLSEN (1 << 0) +#define ULPI_CARKIT_PLS_CTRL_RXPLSEN (1 << 1) +#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN (1 << 2) +#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN (1 << 3) + + +#endif /* __USB_ULPI_H__ */ |