diff options
31 files changed, 6839 insertions, 3 deletions
@@ -317,7 +317,7 @@ LIST_avr32="atstk1002" ######################################################################### LIST_blackfin=" \ - bf533-ezkit bf533-stamp bf537-stamp \ + bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit \ " #----------------------------------------------------------------------- @@ -182,7 +182,11 @@ OBJS += cpu/$(CPU)/flush.o cpu/$(CPU)/init_sdram.o endif ifeq ($(CPU),bf537) OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o -OBJS += cpu/$(CPU)/flush.o cpu/$(CPU)/init_sdram.o +OBJS += cpu/$(CPU)/flush.o cpu/$(CPU)/init_sdram.o +endif +ifeq ($(CPU),bf561) +OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o +OBJS += cpu/$(CPU)/flush.o cpu/$(CPU)/init_sdram.o endif OBJS := $(addprefix $(obj),$(OBJS)) @@ -2363,6 +2367,9 @@ bf533-stamp_config: unconfig bf537-stamp_config: unconfig @$(MKCONFIG) $(@:_config=) blackfin bf537 bf537-stamp +bf561-ezkit_config: unconfig + @$(MKCONFIG) $(@:_config=) blackfin bf561 bf561-ezkit + #======================================================================== # AVR32 #======================================================================== @@ -2399,7 +2406,7 @@ clean: rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds rm -f $(obj)board/bf533-ezkit/u-boot.lds $(obj)board/bf533-stamp/u-boot.lds - rm -f $(obj)board/bf537-stamp/u-boot.lds + rm -f $(obj)board/bf537-stamp/u-boot.lds $(obj)board/bf561-ezkit/u-boot.lds rm -f $(obj)include/bmp_logo.h rm -f $(obj)nand_spl/u-boot-spl $(obj)nand_spl/u-boot-spl.map diff --git a/board/bf561-ezkit/Makefile b/board/bf561-ezkit/Makefile new file mode 100644 index 0000000..a3c2e5b --- /dev/null +++ b/board/bf561-ezkit/Makefile @@ -0,0 +1,58 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005-2007 Analog Device Inc. +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +u-boot.lds: u-boot.lds.S + $(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp + mv -f $@.tmp $@ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c new file mode 100644 index 0000000..71281c0 --- /dev/null +++ b/board/bf561-ezkit/bf561-ezkit.c @@ -0,0 +1,73 @@ +/* + * U-boot - ezkit561.c + * + * Copyright (c) 2005 Bas Vermeulen <bas@buyways.nl> + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> + +int checkboard(void) +{ + printf("CPU: ADSP BF561\n"); + printf("Board: ADI BF561 EZ-Kit Lite board\n"); + printf(" Support: http://blackfin.uclinux.org/\n"); + return 0; +} + +long int initdram(int board_type) +{ + DECLARE_GLOBAL_DATA_PTR; +#ifdef DEBUG + int brate; + char *tmp = getenv("baudrate"); + brate = simple_strtoul(tmp, NULL, 16); + printf("Serial Port initialized with Baud rate = %x\n", brate); + printf("SDRAM attributes:\n"); + printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles" + "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n", + 3, 3, 6, 2, 3); + printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE); + printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20); +#endif + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_MAX_RAM_SIZE; + return CFG_MAX_RAM_SIZE; +} + +#if defined(CONFIG_MISC_INIT_R) +/* miscellaneous platform dependent initialisations */ +int misc_init_r(void) +{ + /* Keep PF12 low to be able to drive the USB-LAN Extender */ + *pFIO0_DIR = 0x0000; + *pFIO0_FLAG_C = 0x1000; /* Clear PF12 */ + sync(); + *pFIO0_POLAR = 0x0000; + sync(); + + return 0; +} +#endif diff --git a/board/bf561-ezkit/config.mk b/board/bf561-ezkit/config.mk new file mode 100644 index 0000000..a623c3d --- /dev/null +++ b/board/bf561-ezkit/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes +# 256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h +TEXT_BASE = 0x03FC0000 diff --git a/board/bf561-ezkit/u-boot.lds.S b/board/bf561-ezkit/u-boot.lds.S new file mode 100644 index 0000000..84df5fc --- /dev/null +++ b/board/bf561-ezkit/u-boot.lds.S @@ -0,0 +1,153 @@ +/* + * U-boot - u-boot.lds.S + * + * Copyright (c) 2005-2007 Analog Device Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +OUTPUT_ARCH(bfin) +OUTPUT_ARCH(bfin) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + . = CFG_MONITOR_BASE; + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector before the environment sector. If it throws */ + /* an error during compilation remove an object here to get */ + /* it linked after the configuration sector. */ + + cpu/bf561/start.o (.text) + cpu/bf561/start1.o (.text) + cpu/bf561/traps.o (.text) + cpu/bf561/interrupt.o (.text) + cpu/bf561/serial.o (.text) + common/dlmalloc.o (.text) +/* lib_blackfin/bf533_string.o (.text) */ +/* lib_generic/vsprintf.o (.text) */ + lib_generic/crc32.o (.text) + lib_generic/zlib.o (.text) + board/bf561-ezkit/bf561-ezkit.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + ___u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + ___u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/bf561/Makefile b/cpu/bf561/Makefile new file mode 100644 index 0000000..ee7842a --- /dev/null +++ b/cpu/bf561/Makefile @@ -0,0 +1,52 @@ +# U-boot - Makefile +# +# Copyright (c) 2005 blackfin.uclinux.org +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).a + +START = start.o start1.o interrupt.o cache.o flush.o init_sdram.o +COBJS = cpu.o traps.o ints.o serial.o interrupts.o video.o + +EXTRA = init_sdram_bootrom_initblock.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/bf561/cache.S b/cpu/bf561/cache.S new file mode 100644 index 0000000..5bda5bf --- /dev/null +++ b/cpu/bf561/cache.S @@ -0,0 +1,128 @@ +#define ASSEMBLY +#include <asm/linkage.h> +#include <config.h> +#include <asm/blackfin.h> + +.text +.align 2 +ENTRY(_blackfin_icache_flush_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; + 1: + IFLUSH[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + IFLUSH[P0]; + SSYNC; + RTS; + +ENTRY(_blackfin_dcache_flush_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + FLUSH[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + FLUSH[P0]; + SSYNC; + RTS; + +ENTRY(_icache_invalidate) +ENTRY(_invalidate_entire_icache) + [--SP] = (R7:5); + + P0.L = (IMEM_CONTROL & 0xFFFF); + P0.H = (IMEM_CONTROL >> 16); + R7 =[P0]; + + /* + * Clear the IMC bit , All valid bits in the instruction + * cache are set to the invalid state + */ + BITCLR(R7, IMC_P); + CLI R6; + /* SSYNC required before invalidating cache. */ + SSYNC; + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + /* Configures the instruction cache agian */ + R6 = (IMC | ENICPLB); + R7 = R7 | R6; + + CLI R6; + SSYNC; + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + (R7:5) =[SP++]; + RTS; + +/* + * Invalidate the Entire Data cache by + * clearing DMC[1:0] bits + */ +ENTRY(_invalidate_entire_dcache) +ENTRY(_dcache_invalidate) + [--SP] = (R7:6); + + P0.L = (DMEM_CONTROL & 0xFFFF); + P0.H = (DMEM_CONTROL >> 16); + R7 =[P0]; + + /* + * Clear the DMC[1:0] bits, All valid bits in the data + * cache are set to the invalid state + */ + BITCLR(R7, DMC0_P); + BITCLR(R7, DMC1_P); + CLI R6; + SSYNC; + .align 8; + [P0] = R7; + SSYNC; + STI R6; + /* Configures the data cache again */ + + R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + R7 = R7 | R6; + + CLI R6; + SSYNC; + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + (R7:6) =[SP++]; + RTS; + +ENTRY(_blackfin_dcache_invalidate_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + FLUSHINV[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + + /* + * If the data crosses a cache line, then we'll be pointing to + * the last cache line, but won't have flushed/invalidated it yet, so do + * one more. + */ + FLUSHINV[P0]; + SSYNC; + RTS; diff --git a/cpu/bf561/config.mk b/cpu/bf561/config.mk new file mode 100644 index 0000000..c49a0ba --- /dev/null +++ b/cpu/bf561/config.mk @@ -0,0 +1,27 @@ +# U-boot - config.mk +# +# Copyright (c) 2005 blackfin.uclinux.org +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -mcpu=bf561 -ffixed-P5 diff --git a/cpu/bf561/cpu.c b/cpu/bf561/cpu.c new file mode 100644 index 0000000..a7b53d8 --- /dev/null +++ b/cpu/bf561/cpu.c @@ -0,0 +1,220 @@ +/* + * U-boot - cpu.c CPU specific functions + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/blackfin.h> +#include <command.h> +#include <asm/entry.h> +#include <asm/cplb.h> +#include <asm/io.h> + +#define CACHE_ON 1 +#define CACHE_OFF 0 + +extern unsigned int icplb_table[page_descriptor_table_size][2]; +extern unsigned int dcplb_table[page_descriptor_table_size][2]; + +int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + __asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_ISRAM) + ); + + return 0; +} + +/* These functions are just used to satisfy the linker */ +int cpu_init(void) +{ + return 0; +} + +int cleanup_before_linux(void) +{ + return 0; +} + +void icache_enable(void) +{ + unsigned int *I0, *I1; + int i, j = 0; + + /* Before enable icache, disable it first */ + icache_disable(); + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + + /* make sure the locked ones go in first */ + for (i = 0; i < page_descriptor_table_size; i++) { + if (CPLB_LOCK & icplb_table[i][1]) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + icplb_table[i][0], icplb_table[i][1]); + *I0++ = icplb_table[i][0]; + *I1++ = icplb_table[i][1]; + j++; + } + } + + for (i = 0; i < page_descriptor_table_size; i++) { + if (!(CPLB_LOCK & icplb_table[i][1])) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + icplb_table[i][0], icplb_table[i][1]); + *I0++ = icplb_table[i][0]; + *I1++ = icplb_table[i][1]; + j++; + if (j == 16) { + break; + } + } + } + + /* Fill the rest with invalid entry */ + if (j <= 15) { + for (; j < 16; j++) { + debug("filling %i with 0", j); + *I1++ = 0x0; + } + + } + + cli(); + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; + sync(); + sti(); +} + +void icache_disable(void) +{ + cli(); + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); + sync(); + sti(); +} + +int icache_status(void) +{ + unsigned int value; + value = *(unsigned int *)IMEM_CONTROL; + + if (value & (IMC | ENICPLB)) + return CACHE_ON; + else + return CACHE_OFF; +} + +void dcache_enable(void) +{ + unsigned int *I0, *I1; + unsigned int temp; + int i, j = 0; + + /* Before enable dcache, disable it first */ + dcache_disable(); + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + + /* make sure the locked ones go in first */ + for (i = 0; i < page_descriptor_table_size; i++) { + if (CPLB_LOCK & dcplb_table[i][1]) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + *I0++ = dcplb_table[i][0]; + *I1++ = dcplb_table[i][1]; + j++; + } else { + debug("skip %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + } + } + + for (i = 0; i < page_descriptor_table_size; i++) { + if (!(CPLB_LOCK & dcplb_table[i][1])) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + *I0++ = dcplb_table[i][0]; + *I1++ = dcplb_table[i][1]; + j++; + if (j == 16) { + break; + } + } + } + + /* Fill the rest with invalid entry */ + if (j <= 15) { + for (; j < 16; j++) { + debug("filling %i with 0", j); + *I1++ = 0x0; + } + } + + cli(); + temp = *(unsigned int *)DMEM_CONTROL; + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL = + ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp; + sync(); + sti(); +} + +void dcache_disable(void) +{ + + unsigned int *I0, *I1; + int i; + + cli(); + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL &= + ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + sync(); + sti(); + + /* after disable dcache, clear it so we don't confuse the next application */ + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + + for (i = 0; i < 16; i++) { + *I0++ = 0x0; + *I1++ = 0x0; + } +} + +int dcache_status(void) +{ + unsigned int value; + value = *(unsigned int *)DMEM_CONTROL; + if (value & (ENDCPLB)) + return CACHE_ON; + else + return CACHE_OFF; +} diff --git a/cpu/bf561/cpu.h b/cpu/bf561/cpu.h new file mode 100644 index 0000000..821363e --- /dev/null +++ b/cpu/bf561/cpu.h @@ -0,0 +1,66 @@ +/* + * U-boot - cpu.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _CPU_H_ +#define _CPU_H_ + +#include <command.h> + +#define INTERNAL_IRQS (32) +#define NUM_IRQ_NODES 16 +#define DEF_INTERRUPT_FLAGS 1 +#define MAX_TIM_LOAD 0xFFFFFFFF + +void blackfin_irq_panic(int reason, struct pt_regs *reg); +extern void dump(struct pt_regs *regs); +void display_excp(void); +asmlinkage void evt_nmi(void); +asmlinkage void evt_exception(void); +asmlinkage void trap(void); +asmlinkage void evt_ivhw(void); +asmlinkage void evt_rst(void); +asmlinkage void evt_timer(void); +asmlinkage void evt_evt7(void); +asmlinkage void evt_evt8(void); +asmlinkage void evt_evt9(void); +asmlinkage void evt_evt10(void); +asmlinkage void evt_evt11(void); +asmlinkage void evt_evt12(void); +asmlinkage void evt_evt13(void); +asmlinkage void evt_soft_int1(void); +asmlinkage void evt_system_call(void); +void blackfin_irq_panic(int reason, struct pt_regs *regs); +void blackfin_free_irq(unsigned int irq, void *dev_id); +void call_isr(int irq, struct pt_regs *fp); +void blackfin_do_irq(int vec, struct pt_regs *fp); +void blackfin_init_IRQ(void); +void blackfin_enable_irq(unsigned int irq); +void blackfin_disable_irq(unsigned int irq); +extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); +int blackfin_request_irq(unsigned int irq, + void (*handler) (int, void *, struct pt_regs *), + unsigned long flags, const char *devname, + void *dev_id); +void timer_init(void); +#endif diff --git a/cpu/bf561/flush.S b/cpu/bf561/flush.S new file mode 100644 index 0000000..7e12c83 --- /dev/null +++ b/cpu/bf561/flush.S @@ -0,0 +1,402 @@ +/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. + * Copyright (C) 2004 LG SOft India. All Rights Reserved. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. + */ +#define ASSEMBLY + +#include <asm/linkage.h> +#include <asm/cplb.h> +#include <config.h> +#include <asm/blackfin.h> + +.text + +/* This is an external function being called by the user + * application through __flush_cache_all. Currently this function + * serves the purpose of flushing all the pending writes in + * in the instruction cache. + */ + +ENTRY(_flush_instruction_cache) + [--SP] = ( R7:6, P5:4 ); + LINK 12; + SP += -12; + P5.H = (ICPLB_ADDR0 >> 16); + P5.L = (ICPLB_ADDR0 & 0xFFFF); + P4.H = (ICPLB_DATA0 >> 16); + P4.L = (ICPLB_DATA0 & 0xFFFF); + R7 = CPLB_VALID | CPLB_L1_CHBL; + R6 = 16; +inext: R0 = [P5++]; + R1 = [P4++]; + [--SP] = RETS; + CALL _icplb_flush; /* R0 = page, R1 = data*/ + RETS = [SP++]; +iskip: R6 += -1; + CC = R6; + IF CC JUMP inext; + SSYNC; + SP += 12; + UNLINK; + ( R7:6, P5:4 ) = [SP++]; + RTS; + +/* This is an internal function to flush all pending + * writes in the cache associated with a particular ICPLB. + * + * R0 - page's start address + * R1 - CPLB's data field. + */ + +.align 2 +ENTRY(_icplb_flush) + [--SP] = ( R7:0, P5:0 ); + [--SP] = LC0; + [--SP] = LT0; + [--SP] = LB0; + [--SP] = LC1; + [--SP] = LT1; + [--SP] = LB1; + + /* If it's a 1K or 4K page, then it's quickest to + * just systematically flush all the addresses in + * the page, regardless of whether they're in the + * cache, or dirty. If it's a 1M or 4M page, there + * are too many addresses, and we have to search the + * cache for lines corresponding to the page. + */ + + CC = BITTST(R1, 17); /* 1MB or 4MB */ + IF !CC JUMP iflush_whole_page; + + /* We're only interested in the page's size, so extract + * this from the CPLB (bits 17:16), and scale to give an + * offset into the page_size and page_prefix tables. + */ + + R1 <<= 14; + R1 >>= 30; + R1 <<= 2; + + /* We can also determine the sub-bank used, because this is + * taken from bits 13:12 of the address. + */ + + R3 = ((12<<8)|2); /* Extraction pattern */ + nop; /*Anamoly 05000209*/ + R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ + R3.H = R4.L << 0 ; /* Save in extraction pattern for later deposit.*/ + + + /* So: + * R0 = Page start + * R1 = Page length (actually, offset into size/prefix tables) + * R3 = sub-bank deposit values + * + * The cache has 2 Ways, and 64 sets, so we iterate through + * the sets, accessing the tag for each Way, for our Bank and + * sub-bank, looking for dirty, valid tags that match our + * address prefix. + */ + + P5.L = (ITEST_COMMAND & 0xFFFF); + P5.H = (ITEST_COMMAND >> 16); + P4.L = (ITEST_DATA0 & 0xFFFF); + P4.H = (ITEST_DATA0 >> 16); + + P0.L = page_prefix_table; + P0.H = page_prefix_table; + P1 = R1; + R5 = 0; /* Set counter*/ + P0 = P1 + P0; + R4 = [P0]; /* This is the address prefix*/ + + /* We're reading (bit 1==0) the tag (bit 2==0), and we + * don't care about which double-word, since we're only + * fetching tags, so we only have to set Set, Bank, + * Sub-bank and Way. + */ + + P2 = 4; + LSETUP (ifs1, ife1) LC1 = P2; +ifs1: P0 = 32; /* iterate over all sets*/ + LSETUP (ifs0, ife0) LC0 = P0; +ifs0: R6 = R5 << 5; /* Combine set*/ + R6.H = R3.H << 0 ; /* and sub-bank*/ + [P5] = R6; /* Issue Command*/ + SSYNC; /* CSYNC will not work here :(*/ + R7 = [P4]; /* and read Tag.*/ + CC = BITTST(R7, 0); /* Check if valid*/ + IF !CC JUMP ifskip; /* and skip if not.*/ + + /* Compare against the page address. First, plant bits 13:12 + * into the tag, since those aren't part of the returned data. + */ + + R7 = DEPOSIT(R7, R3); /* set 13:12*/ + R1 = R7 & R4; /* Mask off lower bits*/ + CC = R1 == R0; /* Compare against page start.*/ + IF !CC JUMP ifskip; /* Skip it if it doesn't match.*/ + + /* Tag address matches against page, so this is an entry + * we must flush. + */ + + R7 >>= 10; /* Mask off the non-address bits*/ + R7 <<= 10; + P3 = R7; + IFLUSH [P3]; /* And flush the entry*/ +ifskip: +ife0: R5 += 1; /* Advance to next Set*/ +ife1: NOP; + +ifinished: + SSYNC; /* Ensure the data gets out to mem.*/ + + /*Finished. Restore context.*/ + LB1 = [SP++]; + LT1 = [SP++]; + LC1 = [SP++]; + LB0 = [SP++]; + LT0 = [SP++]; + LC0 = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +iflush_whole_page: + /* It's a 1K or 4K page, so quicker to just flush the + * entire page. + */ + + P1 = 32; /* For 1K pages*/ + P2 = P1 << 2; /* For 4K pages*/ + P0 = R0; /* Start of page*/ + CC = BITTST(R1, 16); /* Whether 1K or 4K*/ + IF CC P1 = P2; + P1 += -1; /* Unroll one iteration*/ + SSYNC; + IFLUSH [P0++]; /* because CSYNC can't end loops.*/ + LSETUP (isall, ieall) LC0 = P1; +isall:IFLUSH [P0++]; +ieall: NOP; + SSYNC; + JUMP ifinished; + +/* This is an external function being called by the user + * application through __flush_cache_all. Currently this function + * serves the purpose of flushing all the pending writes in + * in the data cache. + */ + +ENTRY(_flush_data_cache) + [--SP] = ( R7:6, P5:4 ); + LINK 12; + SP += -12; + P5.H = (DCPLB_ADDR0 >> 16); + P5.L = (DCPLB_ADDR0 & 0xFFFF); + P4.H = (DCPLB_DATA0 >> 16); + P4.L = (DCPLB_DATA0 & 0xFFFF); + R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z); + R6 = 16; +next: R0 = [P5++]; + R1 = [P4++]; + CC = BITTST(R1, 14); /* Is it write-through?*/ + IF CC JUMP skip; /* If so, ignore it.*/ + R2 = R1 & R7; /* Is it a dirty, cached page?*/ + CC = R2; + IF !CC JUMP skip; /* If not, ignore it.*/ + [--SP] = RETS; + CALL _dcplb_flush; /* R0 = page, R1 = data*/ + RETS = [SP++]; +skip: R6 += -1; + CC = R6; + IF CC JUMP next; + SSYNC; + SP += 12; + UNLINK; + ( R7:6, P5:4 ) = [SP++]; + RTS; + +/* This is an internal function to flush all pending + * writes in the cache associated with a particular DCPLB. + * + * R0 - page's start address + * R1 - CPLB's data field. + */ + +.align 2 +ENTRY(_dcplb_flush) + [--SP] = ( R7:0, P5:0 ); + [--SP] = LC0; + [--SP] = LT0; + [--SP] = LB0; + [--SP] = LC1; + [--SP] = LT1; + [--SP] = LB1; + + /* If it's a 1K or 4K page, then it's quickest to + * just systematically flush all the addresses in + * the page, regardless of whether they're in the + * cache, or dirty. If it's a 1M or 4M page, there + * are too many addresses, and we have to search the + * cache for lines corresponding to the page. + */ + + CC = BITTST(R1, 17); /* 1MB or 4MB */ + IF !CC JUMP dflush_whole_page; + + /* We're only interested in the page's size, so extract + * this from the CPLB (bits 17:16), and scale to give an + * offset into the page_size and page_prefix tables. + */ + + R1 <<= 14; + R1 >>= 30; + R1 <<= 2; + + /* The page could be mapped into Bank A or Bank B, depending + * on (a) whether both banks are configured as cache, and + * (b) on whether address bit A[x] is set. x is determined + * by DCBS in DMEM_CONTROL + */ + + R2 = 0; /* Default to Bank A (Bank B would be 1)*/ + + P0.L = (DMEM_CONTROL & 0xFFFF); + P0.H = (DMEM_CONTROL >> 16); + + R3 = [P0]; /* If Bank B is not enabled as cache*/ + CC = BITTST(R3, 2); /* then Bank A is our only option.*/ + IF CC JUMP bank_chosen; + + R4 = 1<<14; /* If DCBS==0, use A[14].*/ + R5 = R4 << 7; /* If DCBS==1, use A[23];*/ + CC = BITTST(R3, 4); + IF CC R4 = R5; /* R4 now has either bit 14 or bit 23 set.*/ + R5 = R0 & R4; /* Use it to test the Page address*/ + CC = R5; /* and if that bit is set, we use Bank B,*/ + R2 = CC; /* else we use Bank A.*/ + R2 <<= 23; /* The Bank selection's at posn 23.*/ + +bank_chosen: + + /* We can also determine the sub-bank used, because this is + * taken from bits 13:12 of the address. + */ + + R3 = ((12<<8)|2); /* Extraction pattern */ + nop; /*Anamoly 05000209*/ + R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ + /* Save in extraction pattern for later deposit.*/ + R3.H = R4.L << 0; + + /* So: + * R0 = Page start + * R1 = Page length (actually, offset into size/prefix tables) + * R2 = Bank select mask + * R3 = sub-bank deposit values + * + * The cache has 2 Ways, and 64 sets, so we iterate through + * the sets, accessing the tag for each Way, for our Bank and + * sub-bank, looking for dirty, valid tags that match our + * address prefix. + */ + + P5.L = (DTEST_COMMAND & 0xFFFF); + P5.H = (DTEST_COMMAND >> 16); + P4.L = (DTEST_DATA0 & 0xFFFF); + P4.H = (DTEST_DATA0 >> 16); + + P0.L = page_prefix_table; + P0.H = page_prefix_table; + P1 = R1; + R5 = 0; /* Set counter*/ + P0 = P1 + P0; + R4 = [P0]; /* This is the address prefix*/ + + + /* We're reading (bit 1==0) the tag (bit 2==0), and we + * don't care about which double-word, since we're only + * fetching tags, so we only have to set Set, Bank, + * Sub-bank and Way. + */ + + P2 = 2; + LSETUP (fs1, fe1) LC1 = P2; +fs1: P0 = 64; /* iterate over all sets*/ + LSETUP (fs0, fe0) LC0 = P0; +fs0: R6 = R5 << 5; /* Combine set*/ + R6.H = R3.H << 0 ; /* and sub-bank*/ + R6 = R6 | R2; /* and Bank. Leave Way==0 at first.*/ + BITSET(R6,14); + [P5] = R6; /* Issue Command*/ + SSYNC; + R7 = [P4]; /* and read Tag.*/ + CC = BITTST(R7, 0); /* Check if valid*/ + IF !CC JUMP fskip; /* and skip if not.*/ + CC = BITTST(R7, 1); /* Check if dirty*/ + IF !CC JUMP fskip; /* and skip if not.*/ + + /* Compare against the page address. First, plant bits 13:12 + * into the tag, since those aren't part of the returned data. + */ + + R7 = DEPOSIT(R7, R3); /* set 13:12*/ + R1 = R7 & R4; /* Mask off lower bits*/ + CC = R1 == R0; /* Compare against page start.*/ + IF !CC JUMP fskip; /* Skip it if it doesn't match.*/ + + /* Tag address matches against page, so this is an entry + * we must flush. + */ + + R7 >>= 10; /* Mask off the non-address bits*/ + R7 <<= 10; + P3 = R7; + SSYNC; + FLUSHINV [P3]; /* And flush the entry*/ +fskip: +fe0: R5 += 1; /* Advance to next Set*/ +fe1: BITSET(R2, 26); /* Go to next Way.*/ + +dfinished: + SSYNC; /* Ensure the data gets out to mem.*/ + + /*Finished. Restore context.*/ + LB1 = [SP++]; + LT1 = [SP++]; + LC1 = [SP++]; + LB0 = [SP++]; + LT0 = [SP++]; + LC0 = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +dflush_whole_page: + + /* It's a 1K or 4K page, so quicker to just flush the + * entire page. + */ + + P1 = 32; /* For 1K pages*/ + P2 = P1 << 2; /* For 4K pages*/ + P0 = R0; /* Start of page*/ + CC = BITTST(R1, 16); /* Whether 1K or 4K*/ + IF CC P1 = P2; + P1 += -1; /* Unroll one iteration*/ + SSYNC; + FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ + LSETUP (eall, eall) LC0 = P1; +eall: FLUSHINV [P0++]; + SSYNC; + JUMP dfinished; + +.align 4; +page_prefix_table: +.byte4 0xFFFFFC00; /* 1K */ +.byte4 0xFFFFF000; /* 4K */ +.byte4 0xFFF00000; /* 1M */ +.byte4 0xFFC00000; /* 4M */ +.page_prefix_table.end: diff --git a/cpu/bf561/init_sdram.S b/cpu/bf561/init_sdram.S new file mode 100644 index 0000000..d763f27 --- /dev/null +++ b/cpu/bf561/init_sdram.S @@ -0,0 +1,171 @@ +#define ASSEMBLY + +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mem_init.h> +.global init_sdram; + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +init_sdram: + [--SP] = ASTAT; + [--SP] = RETS; + [--SP] = (R7:0); + [--SP] = (P5:0); + + /* + * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable + */ + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + /* + * Put SDRAM in self-refresh, incase anything is running + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + /* + * Set PLL_CTL with the value that we calculate in R0 + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2? */ + r0 = r1 | r0; + r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +check_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump check_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + /* + * We now are running at speed, time to set the Async mem bank wait states + * This will speed up execution, since we are normally running from FLASH. + */ + + p2.h = (EBIU_AMBCTL1 >> 16); + p2.l = (EBIU_AMBCTL1 & 0xFFFF); + r0.h = (AMBCTL1VAL >> 16); + r0.l = (AMBCTL1VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMBCTL0 >> 16); + p2.l = (EBIU_AMBCTL0 & 0xFFFF); + r0.h = (AMBCTL0VAL >> 16); + r0.l = (AMBCTL0VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMGCTL >> 16); + p2.l = (EBIU_AMGCTL & 0xffff); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* + * Now, Initialize the SDRAM, + * start with the SDRAM Refresh Rate Control Register + */ + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Memory Bank Control Register - bank specific parameters + */ + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Global Control Register - global programmable parameters + * Disable self-refresh + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + + /* + * Check if SDRAM is already powered up, if it is, enable self-refresh + */ + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump skip; + NOP; + BITSET (R0, 23); +skip: + [P2] = R0; + SSYNC; + + /* Write in the new value in the register */ + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + [P2] = R0; + SSYNC; + nop; + + (P5:0) = [SP++]; + (R7:0) = [SP++]; + RETS = [SP++]; + ASTAT = [SP++]; + RTS; diff --git a/cpu/bf561/init_sdram_bootrom_initblock.S b/cpu/bf561/init_sdram_bootrom_initblock.S new file mode 100644 index 0000000..5e3c88a --- /dev/null +++ b/cpu/bf561/init_sdram_bootrom_initblock.S @@ -0,0 +1,185 @@ +#define ASSEMBLY + +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mem_init.h> +.global init_sdram; + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +init_sdram: + [--SP] = ASTAT; + [--SP] = RETS; + [--SP] = (R7:0); + [--SP] = (P5:0); + + + p0.h = hi(SICA_IWR0); + p0.l = lo(SICA_IWR0); + r0.l = 0x1; + w[p0] = r0.l; + SSYNC; + + p0.h = hi(SPI_BAUD); + p0.l = lo(SPI_BAUD); + r0.l = CONFIG_SPI_BAUD_INITBLOCK; + w[p0] = r0.l; + SSYNC; + + /* + * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable + */ + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + /* + * Put SDRAM in self-refresh, incase anything is running + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + /* + * Set PLL_CTL with the value that we calculate in R0 + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2? */ + r0 = r1 | r0; + r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +check_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump check_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + /* + * We now are running at speed, time to set the Async mem bank wait states + * This will speed up execution, since we are normally running from FLASH. + */ + + p2.h = (EBIU_AMBCTL1 >> 16); + p2.l = (EBIU_AMBCTL1 & 0xFFFF); + r0.h = (AMBCTL1VAL >> 16); + r0.l = (AMBCTL1VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMBCTL0 >> 16); + p2.l = (EBIU_AMBCTL0 & 0xFFFF); + r0.h = (AMBCTL0VAL >> 16); + r0.l = (AMBCTL0VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMGCTL >> 16); + p2.l = (EBIU_AMGCTL & 0xffff); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* + * Now, Initialize the SDRAM, + * start with the SDRAM Refresh Rate Control Register + */ + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Memory Bank Control Register - bank specific parameters + */ + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Global Control Register - global programmable parameters + * Disable self-refresh + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + + /* + * Check if SDRAM is already powered up, if it is, enable self-refresh + */ + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump skip; + NOP; + BITSET (R0, 23); +skip: + [P2] = R0; + SSYNC; + + /* Write in the new value in the register */ + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + [P2] = R0; + SSYNC; + nop; + + + (P5:0) = [SP++]; + (R7:0) = [SP++]; + RETS = [SP++]; + ASTAT = [SP++]; + RTS; diff --git a/cpu/bf561/interrupt.S b/cpu/bf561/interrupt.S new file mode 100644 index 0000000..f82fd9b --- /dev/null +++ b/cpu/bf561/interrupt.S @@ -0,0 +1,246 @@ +/* + * U-boot - interrupt.S Processing of interrupts and exception handling + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This file is based on interrupt.S + * + * Copyright (C) 2003 Metrowerks, Inc. <mwaddel@metrowerks.com> + * Copyright (C) 2002 Arcturus Networks Ltd. Ted Ma <mated@sympatico.ca> + * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, + * Kenneth Albanowski <kjahds@kjahds.com>, + * The Silver Hammer Group, Ltd. + * + * (c) 1995, Dionne & Associates + * (c) 1995, DKG Display Tech. + * + * This file is also based on exception.asm + * (C) Copyright 2001-2005 - Analog Devices, Inc. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define ASSEMBLY +#include <config.h> +#include <asm/blackfin.h> +#include <asm/hw_irq.h> +#include <asm/entry.h> +#include <asm/blackfin_defs.h> + +.global _blackfin_irq_panic; + +.text +.align 2 + +#ifndef CONFIG_KGDB +.global _evt_emulation +_evt_emulation: + SAVE_CONTEXT + r0 = IRQ_EMU; + r1 = seqstat; + sp += -12; + call _blackfin_irq_panic; + sp += 12; + rte; +#endif + +.global _evt_nmi +_evt_nmi: + SAVE_CONTEXT + r0 = IRQ_NMI; + r1 = RETN; + sp += -12; + call _blackfin_irq_panic; + sp += 12; + +_evt_nmi_exit: + rtn; + +.global _trap +_trap: + SAVE_ALL_SYS + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + sp += -12; + call _trap_c + sp += 12; + RESTORE_ALL_SYS + rtx; + +.global _evt_rst +_evt_rst: + SAVE_CONTEXT + r0 = IRQ_RST; + r1 = RETN; + sp += -12; + call _do_reset; + sp += 12; + +_evt_rst_exit: + rtn; + +irq_panic: + r0 = IRQ_EVX; + r1 = sp; + sp += -12; + call _blackfin_irq_panic; + sp += 12; + +.global _evt_ivhw +_evt_ivhw: + SAVE_CONTEXT + RAISE 14; + +_evt_ivhw_exit: + rti; + +.global _evt_timer +_evt_timer: + SAVE_CONTEXT + r0 = IRQ_CORETMR; + sp += -12; + /* Polling method used now. */ + /* call timer_int; */ + sp += 12; + RESTORE_CONTEXT + rti; + nop; + +.global _evt_evt7 +_evt_evt7: + SAVE_CONTEXT + r0 = 7; + sp += -12; + call _process_int; + sp += 12; + +evt_evt7_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt8 +_evt_evt8: + SAVE_CONTEXT + r0 = 8; + sp += -12; + call _process_int; + sp += 12; + +evt_evt8_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt9 +_evt_evt9: + SAVE_CONTEXT + r0 = 9; + sp += -12; + call _process_int; + sp += 12; + +evt_evt9_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt10 +_evt_evt10: + SAVE_CONTEXT + r0 = 10; + sp += -12; + call _process_int; + sp += 12; + +evt_evt10_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt11 +_evt_evt11: + SAVE_CONTEXT + r0 = 11; + sp += -12; + call _process_int; + sp += 12; + +evt_evt11_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt12 +_evt_evt12: + SAVE_CONTEXT + r0 = 12; + sp += -12; + call _process_int; + sp += 12; +evt_evt12_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt13 +_evt_evt13: + SAVE_CONTEXT + r0 = 13; + sp += -12; + call _process_int; + sp += 12; + +evt_evt13_exit: + RESTORE_CONTEXT + rti; + +.global _evt_system_call +_evt_system_call: + [--sp] = r0; + [--SP] = RETI; + r0 = [sp++]; + r0 += 2; + [--sp] = r0; + RETI = [SP++]; + r0 = [SP++]; + SAVE_CONTEXT + sp += -12; + call _exception_handle; + sp += 12; + RESTORE_CONTEXT + RTI; + +evt_system_call_exit: + rti; + +.global _evt_soft_int1 +_evt_soft_int1: + [--sp] = r0; + [--SP] = RETI; + r0 = [sp++]; + r0 += 2; + [--sp] = r0; + RETI = [SP++]; + r0 = [SP++]; + SAVE_CONTEXT + sp += -12; + call _exception_handle; + sp += 12; + RESTORE_CONTEXT + RTI; + +evt_soft_int1_exit: + rti; diff --git a/cpu/bf561/interrupts.c b/cpu/bf561/interrupts.c new file mode 100644 index 0000000..e314f60 --- /dev/null +++ b/cpu/bf561/interrupts.c @@ -0,0 +1,171 @@ +/* + * U-boot - interrupts.c Interrupt related routines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on interrupts.c + * Copyright 1996 Roman Zippel + * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> + * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> + * Copyright 2003 Metrowerks/Motorola + * Copyright 2003 Bas Vermeulen <bas@buyways.nl>, + * BuyWays B.V. (www.buyways.nl) + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <config.h> +#include <asm/blackfin.h> +#include "cpu.h" + +static ulong timestamp; +static ulong last_time; +static int int_flag; + +int irq_flags; /* needed by asm-blackfin/system.h */ + +/* Functions just to satisfy the linker */ + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On BF561 it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On BF561 it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + ulong tbclk; + + tbclk = CFG_HZ; + return tbclk; +} + +void enable_interrupts(void) +{ + restore_flags(int_flag); +} + +int disable_interrupts(void) +{ + save_and_cli(int_flag); + return 1; +} + +int interrupt_init(void) +{ + return (0); +} + +void udelay(unsigned long usec) +{ + unsigned long delay, start, stop; + unsigned long cclk; + cclk = (CONFIG_CCLK_HZ); + + while (usec > 1) { + /* + * how many clock ticks to delay? + * - request(in useconds) * clock_ticks(Hz) / useconds/second + */ + if (usec < 1000) { + delay = (usec * (cclk / 244)) >> 12; + usec = 0; + } else { + delay = (1000 * (cclk / 244)) >> 12; + usec -= 1000; + } + + asm volatile (" %0 = CYCLES;":"=r" (start)); + do { + asm volatile (" %0 = CYCLES; ":"=r" (stop)); + } while (stop - start < delay); + } + + return; +} + +void timer_init(void) +{ + *pTCNTL = 0x1; + *pTSCALE = 0x0; + *pTCOUNT = MAX_TIM_LOAD; + *pTPERIOD = MAX_TIM_LOAD; + *pTCNTL = 0x7; + asm("CSYNC;"); + + timestamp = 0; + last_time = 0; +} + +/* + * Any network command or flash + * command is started get_timer shall + * be called before TCOUNT gets reset, + * to implement the accurate timeouts. + * + * How ever milliconds doesn't return + * the number that has been elapsed from + * the last reset. + * + * As get_timer is used in the u-boot + * only for timeouts this should be + * sufficient + */ +ulong get_timer(ulong base) +{ + ulong milisec; + + /* Number of clocks elapsed */ + ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT)); + + /* + * Find if the TCOUNT is reset + * timestamp gives the number of times + * TCOUNT got reset + */ + if (clocks < last_time) + timestamp++; + last_time = clocks; + + /* Get the number of milliseconds */ + milisec = clocks / (CONFIG_CCLK_HZ / 1000); + + /* + * Find the number of millisonds + * that got elapsed before this TCOUNT + * cycle + */ + milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000)); + + return (milisec - base); +} diff --git a/cpu/bf561/ints.c b/cpu/bf561/ints.c new file mode 100644 index 0000000..328e5d8 --- /dev/null +++ b/cpu/bf561/ints.c @@ -0,0 +1,117 @@ +/* + * U-boot - ints.c Interrupt related routines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on ints.c + * + * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin + * drivers + * + * Copyright 1996 Roman Zippel + * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> + * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> + * Copyright 2003 Metrowerks/Motorola + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/stddef.h> +#include <asm/system.h> +#include <asm/irq.h> +#include <asm/traps.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/machdep.h> +#include <asm/setup.h> +#include <asm/blackfin.h> +#include "cpu.h" + +void blackfin_irq_panic(int reason, struct pt_regs *regs) +{ + printf("\n\nException: IRQ 0x%x entered\n", reason); + printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); + printf("stack frame=0x%x, ", (unsigned int)regs); + printf("bad PC=0x%04x\n", (unsigned int)regs->pc); + dump(regs); + printf("Unhandled IRQ or exceptions!\n"); + printf("Please reset the board \n"); +} + +void blackfin_init_IRQ(void) +{ + *(unsigned volatile long *)(SIC_IMASK) = SIC_UNMASK_ALL; + cli(); +#ifndef CONFIG_KGDB + *(unsigned volatile long *)(EVT_EMULATION_ADDR) = 0x0; +#endif + *(unsigned volatile long *)(EVT_NMI_ADDR) = + (unsigned volatile long)evt_nmi; + *(unsigned volatile long *)(EVT_EXCEPTION_ADDR) = + (unsigned volatile long)trap; + *(unsigned volatile long *)(EVT_HARDWARE_ERROR_ADDR) = + (unsigned volatile long)evt_ivhw; + *(unsigned volatile long *)(EVT_RESET_ADDR) = + (unsigned volatile long)evt_rst; + *(unsigned volatile long *)(EVT_TIMER_ADDR) = + (unsigned volatile long)evt_timer; + *(unsigned volatile long *)(EVT_IVG7_ADDR) = + (unsigned volatile long)evt_evt7; + *(unsigned volatile long *)(EVT_IVG8_ADDR) = + (unsigned volatile long)evt_evt8; + *(unsigned volatile long *)(EVT_IVG9_ADDR) = + (unsigned volatile long)evt_evt9; + *(unsigned volatile long *)(EVT_IVG10_ADDR) = + (unsigned volatile long)evt_evt10; + *(unsigned volatile long *)(EVT_IVG11_ADDR) = + (unsigned volatile long)evt_evt11; + *(unsigned volatile long *)(EVT_IVG12_ADDR) = + (unsigned volatile long)evt_evt12; + *(unsigned volatile long *)(EVT_IVG13_ADDR) = + (unsigned volatile long)evt_evt13; + *(unsigned volatile long *)(EVT_IVG14_ADDR) = + (unsigned volatile long)evt_system_call; + *(unsigned volatile long *)(EVT_IVG15_ADDR) = + (unsigned volatile long)evt_soft_int1; + *(volatile unsigned long *)ILAT = 0; + asm("csync;"); + sti(); + *(volatile unsigned long *)IMASK = 0xffbf; + asm("csync;"); +} + +void exception_handle(void) +{ +#if defined (CONFIG_PANIC_HANG) + display_excp(); +#else + udelay(100000); /* allow messages to go out */ + do_reset(NULL, 0, 0, NULL); +#endif +} + +void display_excp(void) +{ + printf("Exception!\n"); +} diff --git a/cpu/bf561/serial.c b/cpu/bf561/serial.c new file mode 100644 index 0000000..baec1d3 --- /dev/null +++ b/cpu/bf561/serial.c @@ -0,0 +1,196 @@ +/* + * U-boot - serial.c Serial driver for BF561 + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART. + * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, + * BuyWays B.V. (www.buyways.nl) + * + * Based heavily on blkfinserial.c + * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. + * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> + * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> + * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> + * + * Based on code from 68328 version serial driver imlpementation which was: + * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> + * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/segment.h> +#include <asm/bitops.h> +#include <asm/delay.h> +#include <asm/uaccess.h> +#include "serial.h" +#include <asm/io.h> + +unsigned long pll_div_fact; + +void calc_baud(void) +{ + unsigned char i; + int temp; + u_long sclk = get_sclk(); + + for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { + temp = sclk / (baud_table[i] * 8); + if ((temp & 0x1) == 1) { + temp++; + } + temp = temp / 2; + hw_baud_table[i].dl_high = (temp >> 8) & 0xFF; + hw_baud_table[i].dl_low = (temp) & 0xFF; + } +} + +void serial_setbrg(void) +{ + int i; + DECLARE_GLOBAL_DATA_PTR; + + calc_baud(); + + for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { + if (gd->baudrate == baud_table[i]) + break; + } + + /* Enable UART */ + *pUART_GCTL |= UART_GCTL_UCEN; + sync(); + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH; + sync(); + + *pUART_DLL = hw_baud_table[i].dl_low; + sync(); + *pUART_DLH = hw_baud_table[i].dl_high; + sync(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER; + sync(); + + /* + * Enable ERBFI and ELSI interrupts + * to poll SIC_ISR register + */ + *pUART_IER = UART_IER_ELSI | UART_IER_ERBFI | UART_IER_ETBEI; + sync(); + + /* Set LCR to Word Lengh 8-bit word select */ + *pUART_LCR = UART_LCR_WLS8; + sync(); + + return; +} + +int serial_init(void) +{ + serial_setbrg(); + return (0); +} + +void serial_putc(const char c) +{ + if ((*pUART_LSR) & UART_LSR_TEMT) { + if (c == '\n') + serial_putc('\r'); + + local_put_char(c); + } + + while (!((*pUART_LSR) & UART_LSR_TEMT)) + SYNC_ALL; + + return; +} + +int serial_tstc(void) +{ + if (*pUART_LSR & UART_LSR_DR) + return 1; + else + return 0; +} + +int serial_getc(void) +{ + unsigned short uart_lsr_val, uart_rbr_val; + unsigned long isr_val; + int ret; + + /* Poll for RX Interrupt */ + while (!((isr_val = + *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT)) ; + asm("csync;"); + + uart_lsr_val = *pUART_LSR; /* Clear status bit */ + uart_rbr_val = *pUART_RBR; /* getc() */ + + if (isr_val & IRQ_UART_ERROR_BIT) { + ret = -1; + } else { + ret = uart_rbr_val & 0xff; + } + + return ret; +} + +void serial_puts(const char *s) +{ + while (*s) { + serial_putc(*s++); + } +} + +static void local_put_char(char ch) +{ + int flags = 0; + unsigned long isr_val; + + save_and_cli(flags); + + /* Poll for TX Interruput */ + while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT)) ; + asm("csync;"); + + *pUART_THR = ch; /* putc() */ + + if (isr_val & IRQ_UART_ERROR_BIT) { + printf("?"); + } + + restore_flags(flags); + + return; +} diff --git a/cpu/bf561/serial.h b/cpu/bf561/serial.h new file mode 100644 index 0000000..98c1242 --- /dev/null +++ b/cpu/bf561/serial.h @@ -0,0 +1,77 @@ +/* + * U-boot - bf561_serial.h Serial Driver defines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. + * Copyright (C) 2003 Bas Vermeulen <bas@buyways.nl> + * BuyWays B.V. (www.buyways.nl) + * + * Based heavily on: + * blkfinserial.h: Definitions for the BlackFin DSP serial driver. + * + * Copyright (C) 2001 Tony Z. Kou tonyko@arcturusnetworks.com + * Copyright (C) 2001 Arcturus Networks Inc. <www.arcturusnetworks.com> + * + * Based on code from 68328serial.c which was: + * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> + * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _Bf561_SERIAL_H +#define _Bf561_SERIAL_H + +#include <linux/config.h> +#include <asm/blackfin.h> + +#define SYNC_ALL __asm__ __volatile__ ("ssync;\n") +#define ACCESS_LATCH *pUART_LCR |= UART_LCR_DLAB; +#define ACCESS_PORT_IER *pUART_LCR &= (~UART_LCR_DLAB); + +void serial_setbrg(void); +static void local_put_char(char ch); +void calc_baud(void); +void serial_setbrg(void); +int serial_init(void); +void serial_putc(const char c); +int serial_tstc(void); +int serial_getc(void); +void serial_puts(const char *s); +static void local_put_char(char ch); + +int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 }; + +struct { + unsigned char dl_high; + unsigned char dl_low; +} hw_baud_table[5]; + +#ifdef CONFIG_STAMP +extern unsigned long pll_div_fact; +#endif + +#endif diff --git a/cpu/bf561/start.S b/cpu/bf561/start.S new file mode 100644 index 0000000..9333648 --- /dev/null +++ b/cpu/bf561/start.S @@ -0,0 +1,311 @@ +/* + * U-boot - start.S Startup file of u-boot for BF533/BF561 + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on head.S + * Copyright (c) 2003 Metrowerks/Motorola + * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, + * Kenneth Albanowski <kjahds@kjahds.com>, + * The Silver Hammer Group, Ltd. + * (c) 1995, Dionne & Associates + * (c) 1995, DKG Display Tech. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Note: A change in this file subsequently requires a change in + * board/$(board_name)/config.mk for a valid u-boot.bin + */ + +#define ASSEMBLY + +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> + +.global _stext; +.global __bss_start; +.global start; +.global _start; +.global _rambase; +.global _ramstart; +.global _ramend; +.global edata; +.global _initialize; +.global _exit; +.global flashdataend; +.global init_sdram; + +.text +_start: +start: +_stext: + + R0 = 0x32; + SYSCFG = R0; + SSYNC; + + /* + * As per HW reference manual DAG registers, + * DATA and Address resgister shall be zero'd + * in initialization, after a reset state + */ + r1 = 0; /* Data registers zero'd */ + r2 = 0; + r3 = 0; + r4 = 0; + r5 = 0; + r6 = 0; + r7 = 0; + + p0 = 0; /* Address registers zero'd */ + p1 = 0; + p2 = 0; + p3 = 0; + p4 = 0; + p5 = 0; + + i0 = 0; /* DAG Registers zero'd */ + i1 = 0; + i2 = 0; + i3 = 0; + m0 = 0; + m1 = 0; + m3 = 0; + m3 = 0; + l0 = 0; + l1 = 0; + l2 = 0; + l3 = 0; + b0 = 0; + b1 = 0; + b2 = 0; + b3 = 0; + + /* + * Set loop counters to zero, to make sure that + * hw loops are disabled. + */ + r0 = 0; + lc0 = r0; + lc1 = r0; + + SSYNC; + + /* Check soft reset status */ + p0.h = SWRST >> 16; + p0.l = SWRST & 0xFFFF; + r0.l = w[p0]; + + cc = bittst(r0, 15); + if !cc jump no_soft_reset; + + /* Clear Soft reset */ + r0 = 0x0000; + w[p0] = r0; + ssync; + +no_soft_reset: + nop; + + /* Clear EVT registers */ + p0.h = (EVT_EMULATION_ADDR >> 16); + p0.l = (EVT_EMULATION_ADDR & 0xFFFF); + p0 += 8; + p1 = 14; + r1 = 0; + LSETUP(4,4) lc0 = p1; + [ p0 ++ ] = r1; + + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = 0x1; + w[p0] = r0.l; + SSYNC; + + sp.l = (0xffb01000 & 0xFFFF); + sp.h = (0xffb01000 >> 16); + + /* + * Check if the code is in SDRAM + * If the code is in SDRAM, skip SDRAM initializaiton + */ + call get_pc; + r3.l = 0x0; + r3.h = 0x2000; + cc = r0 < r3 (iu); + if cc jump sdram_initialized; + call init_sdram; + /* relocate into to RAM */ +sdram_initialized: + call get_pc; +offset: + r2.l = offset; + r2.h = offset; + r3.l = start; + r3.h = start; + r1 = r2 - r3; + + r0 = r0 - r1; + p1 = r0; + + p2.l = (CFG_MONITOR_BASE & 0xffff); + p2.h = (CFG_MONITOR_BASE >> 16); + + p3 = 0x04; + p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff); + p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16); +loop1: + r1 = [p1 ++ p3]; + [p2 ++ p3] = r1; + cc=p2==p4; + if !cc jump loop1; + /* + * configure STACK + */ + r0.h = (CONFIG_STACKBASE >> 16); + r0.l = (CONFIG_STACKBASE & 0xFFFF); + sp = r0; + fp = sp; + + /* + * This next section keeps the processor in supervisor mode + * during kernel boot. Switches to user mode at end of boot. + * See page 3-9 of Hardware Reference manual for documentation. + */ + + /* To keep ourselves in the supervisor mode */ + p0.l = (EVT_IVG15_ADDR & 0xFFFF); + p0.h = (EVT_IVG15_ADDR >> 16); + + p1.l = _real_start; + p1.h = _real_start; + [p0] = p1; + + p0.l = (IMASK & 0xFFFF); + p0.h = (IMASK >> 16); + r0.l = LO(IVG15_POS); + r0.h = HI(IVG15_POS); + [p0] = r0; + raise 15; + p0.l = WAIT_HERE; + p0.h = WAIT_HERE; + reti = p0; + rti; + +WAIT_HERE: + jump WAIT_HERE; + +.global _real_start; +_real_start: + [ -- sp ] = reti; + +#ifdef CONFIG_EZKIT561 + p0.l = (WDOG_CTL & 0xFFFF); + p0.h = (WDOG_CTL >> 16); + r0 = WATCHDOG_DISABLE(z); + w[p0] = r0; +#endif + + /* DMA reset code to Hi of L1 SRAM */ +copy: + P1.H = hi(SYSMMR_BASE); /* P1 Points to the beginning of SYSTEM MMR Space */ + P1.L = lo(SYSMMR_BASE); + + R0.H = reset_start; /* Source Address (high) */ + R0.L = reset_start; /* Source Address (low) */ + R1.H = reset_end; + R1.L = reset_end; + R2 = R1 - R0; /* Count */ + R1.H = hi(L1_ISRAM); /* Destination Address (high) */ + R1.L = lo(L1_ISRAM); /* Destination Address (low) */ + R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ + R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ + +DMA: + R6 = 0x1 (Z); + W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ + W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ + + [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ + W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ + /* Set Source DMAConfig = DMA Enable, + Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ + W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; + + [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ + W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ + /* Set Destination DMAConfig = DMA Enable, + Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ + W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; + +WAIT_DMA_DONE: + p0.h = hi(MDMA_D0_IRQ_STATUS); + p0.l = lo(MDMA_D0_IRQ_STATUS); + R0 = W[P0](Z); + CC = BITTST(R0, 0); + if ! CC jump WAIT_DMA_DONE + + R0 = 0x1; + W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ + + /* Initialize BSS Section with 0 s */ + p1.l = __bss_start; + p1.h = __bss_start; + p2.l = _end; + p2.h = _end; + r1 = p1; + r2 = p2; + r3 = r2 - r1; + r3 = r3 >> 2; + p3 = r3; + lsetup (_clear_bss, _clear_bss_end ) lc1 = p3; + CC = p2<=p1; + if CC jump _clear_bss_skip; + r0 = 0; +_clear_bss: +_clear_bss_end: + [p1++] = r0; +_clear_bss_skip: + + p0.l = _start1; + p0.h = _start1; + jump (p0); + +reset_start: + p0.h = WDOG_CNT >> 16; + p0.l = WDOG_CNT & 0xffff; + r0 = 0x0010; + w[p0] = r0; + p0.h = WDOG_CTL >> 16; + p0.l = WDOG_CTL & 0xffff; + r0 = 0x0000; + w[p0] = r0; +reset_wait: + jump reset_wait; + +reset_end: nop; + +_exit: + jump.s _exit; +get_pc: + r0 = rets; + rts; diff --git a/cpu/bf561/start1.S b/cpu/bf561/start1.S new file mode 100644 index 0000000..72cfafb --- /dev/null +++ b/cpu/bf561/start1.S @@ -0,0 +1,38 @@ +/* + * U-boot - start1.S Code running out of RAM after relocation + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define ASSEMBLY +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> + +.global start1; +.global _start1; + +.text +_start1: +start1: + sp += -12; + call _board_init_f; + sp += 12; diff --git a/cpu/bf561/traps.c b/cpu/bf561/traps.c new file mode 100644 index 0000000..f5ff3a8 --- /dev/null +++ b/cpu/bf561/traps.c @@ -0,0 +1,239 @@ +/* + * U-boot - traps.c Routines related to interrupts and exceptions + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * No original Copyright holder listed, + * Probabily original (C) Roman Zippel (assigned DJD, 1999) + * + * Copyright 2003 Metrowerks - for Blackfin + * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca> + * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/types.h> +#include <asm/errno.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/traps.h> +#include <asm/machdep.h> +#include "cpu.h" +#include <asm/arch/anomaly.h> +#include <asm/cplb.h> +#include <asm/io.h> + +void init_IRQ(void) +{ + blackfin_init_IRQ(); + return; +} + +void process_int(unsigned long vec, struct pt_regs *fp) +{ + printf("interrupt\n"); + return; +} + +extern unsigned int icplb_table[page_descriptor_table_size][2]; +extern unsigned int dcplb_table[page_descriptor_table_size][2]; + +unsigned long last_cplb_fault_retx; + +static unsigned int cplb_sizes[4] = + { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 }; + +void trap_c(struct pt_regs *regs) +{ + unsigned int addr; + unsigned long trapnr = (regs->seqstat) & SEQSTAT_EXCAUSE; + unsigned int i, j, size, *I0, *I1; + unsigned short data = 0; + + switch (trapnr) { + /* 0x26 - Data CPLB Miss */ + case VEC_CPLB_M: + +#ifdef ANOMALY_05000261 + /* + * Work around an anomaly: if we see a new DCPLB fault, return + * without doing anything. Then, if we get the same fault again, + * handle it. + */ + addr = last_cplb_fault_retx; + last_cplb_fault_retx = regs->retx; + printf("this time, curr = 0x%08x last = 0x%08x\n", addr, + last_cplb_fault_retx); + if (addr != last_cplb_fault_retx) + goto trap_c_return; +#endif + data = 1; + + case VEC_CPLB_I_M: + + if (data) + addr = *pDCPLB_FAULT_ADDR; + else + addr = *pICPLB_FAULT_ADDR; + + for (i = 0; i < page_descriptor_table_size; i++) { + if (data) { + size = cplb_sizes[dcplb_table[i][1] >> 16]; + j = dcplb_table[i][0]; + } else { + size = cplb_sizes[icplb_table[i][1] >> 16]; + j = icplb_table[i][0]; + } + if ((j <= addr) && ((j + size) > addr)) { + debug("found %i 0x%08x\n", i, j); + break; + } + } + if (i == page_descriptor_table_size) { + printf("something is really wrong\n"); + do_reset(NULL, 0, 0, NULL); + } + + /* Turn the cache off */ + if (data) { + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL &= + ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + sync(); + } else { + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); + sync(); + } + + if (data) { + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + } else { + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + } + + j = 0; + while (*I1 & CPLB_LOCK) { + debug("skipping %i %08p - %08x\n", j, I1, *I1); + *I0++; + *I1++; + j++; + } + + debug("remove %i 0x%08x 0x%08x\n", j, *I0, *I1); + + for (; j < 15; j++) { + debug("replace %i 0x%08x 0x%08x\n", j, I0, I0 + 1); + *I0++ = *(I0 + 1); + *I1++ = *(I1 + 1); + } + + if (data) { + *I0 = dcplb_table[i][0]; + *I1 = dcplb_table[i][1]; + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + } else { + *I0 = icplb_table[i][0]; + *I1 = icplb_table[i][1]; + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + } + + for (j = 0; j < 16; j++) { + debug("%i 0x%08x 0x%08x\n", j, *I0++, *I1++); + } + + /* Turn the cache back on */ + if (data) { + j = *(unsigned int *)DMEM_CONTROL; + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL = + ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j; + sync(); + } else { + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; + sync(); + } + + break; + default: + /* All traps come here */ + printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); + printf("stack frame=0x%x, ", (unsigned int)regs); + printf("bad PC=0x%04x\n", (unsigned int)regs->pc); + dump(regs); + printf("\n\n"); + + printf("Unhandled IRQ or exceptions!\n"); + printf("Please reset the board \n"); + do_reset(NULL, 0, 0, NULL); + } + +trap_c_return: + return; + +} + +void dump(struct pt_regs *fp) +{ + debug("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n", fp->rete, + fp->retn, fp->retx, fp->rets); + debug("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg); + debug("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp); + debug("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", fp->r0, + fp->r1, fp->r2, fp->r3); + debug("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", fp->r4, + fp->r5, fp->r6, fp->r7); + debug("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", fp->p0, + fp->p1, fp->p2, fp->p3); + debug("P4: %08lx P5: %08lx FP: %08lx\n", fp->p4, fp->p5, fp->fp); + debug("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", + fp->a0w, fp->a0x, fp->a1w, fp->a1x); + + debug("LB0: %08lx LT0: %08lx LC0: %08lx\n", fp->lb0, fp->lt0, + fp->lc0); + debug("LB1: %08lx LT1: %08lx LC1: %08lx\n", fp->lb1, fp->lt1, + fp->lc1); + debug("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", fp->b0, fp->l0, + fp->m0, fp->i0); + debug("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", fp->b1, fp->l1, + fp->m1, fp->i1); + debug("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", fp->b2, fp->l2, + fp->m2, fp->i2); + debug("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", fp->b3, fp->l3, + fp->m3, fp->i3); + + debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR); + debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR); + +} diff --git a/cpu/bf561/video.c b/cpu/bf561/video.c new file mode 100644 index 0000000..3ff0151 --- /dev/null +++ b/cpu/bf561/video.c @@ -0,0 +1,194 @@ +/* + * (C) Copyright 2000 + * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it + * (C) Copyright 2002 + * Wolfgang Denk, wd@denx.de + * (C) Copyright 2006 + * Aubrey Li, aubrey.li@analog.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <stdarg.h> +#include <common.h> +#include <config.h> +#include <asm/blackfin.h> +#include <i2c.h> +#include <linux/types.h> +#include <devices.h> + +#ifdef CONFIG_VIDEO +#define NTSC_FRAME_ADDR 0x06000000 +#include "video.h" + +/* NTSC OUTPUT SIZE 720 * 240 */ +#define VERTICAL 2 +#define HORIZONTAL 4 + +int is_vblank_line(const int line) +{ + /* + * This array contains a single bit for each line in + * an NTSC frame. + */ + if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528)) + return true; + + return false; +} + +int NTSC_framebuffer_init(char *base_address) +{ + const int NTSC_frames = 1; + const int NTSC_lines = 525; + char *dest = base_address; + int frame_num, line_num; + + for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) { + for (line_num = 1; line_num <= NTSC_lines; ++line_num) { + unsigned int code; + int offset = 0; + int i; + + if (is_vblank_line(line_num)) + offset++; + + if (line_num > 266 || line_num < 3) + offset += 2; + + /* Output EAV code */ + code = SystemCodeMap[offset].EAV; + write_dest_byte((char)(code >> 24) & 0xff); + write_dest_byte((char)(code >> 16) & 0xff); + write_dest_byte((char)(code >> 8) & 0xff); + write_dest_byte((char)(code) & 0xff); + + /* Output horizontal blanking */ + for (i = 0; i < 67 * 2; ++i) { + write_dest_byte(0x80); + write_dest_byte(0x10); + } + + /* Output SAV */ + code = SystemCodeMap[offset].SAV; + write_dest_byte((char)(code >> 24) & 0xff); + write_dest_byte((char)(code >> 16) & 0xff); + write_dest_byte((char)(code >> 8) & 0xff); + write_dest_byte((char)(code) & 0xff); + + /* Output empty horizontal data */ + for (i = 0; i < 360 * 2; ++i) { + write_dest_byte(0x80); + write_dest_byte(0x10); + } + } + } + + return dest - base_address; +} + +void fill_frame(char *Frame, int Value) +{ + int *OddPtr32; + int OddLine; + int *EvenPtr32; + int EvenLine; + int i; + int *data; + int m, n; + + /* fill odd and even frames */ + for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) { + OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276); + EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276); + for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) { + *OddPtr32 = Value; + *EvenPtr32 = Value; + } + } + + for (m = 0; m < VERTICAL; m++) { + data = (int *)u_boot_logo.data; + for (OddLine = (22 + m), EvenLine = (285 + m); + OddLine < (u_boot_logo.height * VERTICAL) + (22 + m); + OddLine += VERTICAL, EvenLine += VERTICAL) { + OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276); + EvenPtr32 = + (int *)((Frame + ((EvenLine) * 1716)) + 276); + for (i = 0; i < u_boot_logo.width / 2; i++) { + /* enlarge one pixel to m x n */ + for (n = 0; n < HORIZONTAL; n++) { + *OddPtr32++ = *data; + *EvenPtr32++ = *data; + } + data++; + } + } + } +} + +void video_putc(const char c) +{ +} + +void video_puts(const char *s) +{ +} + +static int video_init(void) +{ + char *NTSCFrame; + NTSCFrame = (char *)NTSC_FRAME_ADDR; + NTSC_framebuffer_init(NTSCFrame); + fill_frame(NTSCFrame, BLUE); + + *pPPI_CONTROL = 0x0082; + *pPPI_FRAME = 0x020D; + + *pDMA0_START_ADDR = NTSCFrame; + *pDMA0_X_COUNT = 0x035A; + *pDMA0_X_MODIFY = 0x0002; + *pDMA0_Y_COUNT = 0x020D; + *pDMA0_Y_MODIFY = 0x0002; + *pDMA0_CONFIG = 0x1015; + *pPPI_CONTROL = 0x0083; + return 0; +} + +int drv_video_init(void) +{ + int error, devices = 1; + + device_t videodev; + + video_init(); /* Video initialization */ + + memset(&videodev, 0, sizeof(videodev)); + + strcpy(videodev.name, "video"); + videodev.ext = DEV_EXT_VIDEO; /* Video extensions */ + videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */ + videodev.putc = video_putc; /* 'putc' function */ + videodev.puts = video_puts; /* 'puts' function */ + + error = device_register(&videodev); + + return (error == 0) ? devices : error; +} +#endif diff --git a/cpu/bf561/video.h b/cpu/bf561/video.h new file mode 100644 index 0000000..d237f6a --- /dev/null +++ b/cpu/bf561/video.h @@ -0,0 +1,25 @@ +#include <video_logo.h> +#define write_dest_byte(val) {*dest++=val;} +#define BLACK (0x01800180) /* black pixel pattern */ +#define BLUE (0x296E29F0) /* blue pixel pattern */ +#define RED (0x51F0515A) /* red pixel pattern */ +#define MAGENTA (0x6ADE6ACA) /* magenta pixel pattern */ +#define GREEN (0x91229136) /* green pixel pattern */ +#define CYAN (0xAA10AAA6) /* cyan pixel pattern */ +#define YELLOW (0xD292D210) /* yellow pixel pattern */ +#define WHITE (0xFE80FE80) /* white pixel pattern */ + +#define true 1 +#define false 0 + +typedef struct { + unsigned int SAV; + unsigned int EAV; +} SystemCodeType; + +const SystemCodeType SystemCodeMap[4] = { + {0xFF000080, 0xFF00009D}, + {0xFF0000AB, 0xFF0000B6}, + {0xFF0000C7, 0xFF0000DA}, + {0xFF0000EC, 0xFF0000F1} +}; diff --git a/include/asm-blackfin/arch-bf561/anomaly.h b/include/asm-blackfin/arch-bf561/anomaly.h new file mode 100644 index 0000000..467649b --- /dev/null +++ b/include/asm-blackfin/arch-bf561/anomaly.h @@ -0,0 +1,181 @@ +/* + * File: include/asm-blackfin/arch-bf561/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * This file shoule be up to date with: + * - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 or 0.4 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4)) +#error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4 +#endif + +/* Issues that are common to 0.5 and 0.3 silicon */ +#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not + updated at the same time. */ +#define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned + memory locations */ +#define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR + registers */ +#define ANOMALY_05000127 /* Signbits instruction not functional under certain + conditions */ +#define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits */ +#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz + and higher devices */ +#define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */ +#define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */ +#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not + functional */ +#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the + shadow of a conditional branch */ +#define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop + may cause bad instruction fetches */ +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + external SPORT TX and RX clocks */ +#define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */ +#define ANOMALY_05000269 /* High I/O activity causes output voltage of internal + voltage regulator (VDDint) to increase */ +#define ANOMALY_05000270 /* High I/O activity causes output voltage of internal + voltage regulator (VDDint) to decrease */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000274 /* Data cache write back to external synchronous memory + may be lost */ +#define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */ +#endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */ + +#if (defined(CONFIG_BF_REV_0_5)) +#define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT + mode with external clock */ +#define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to + using IMDMA */ +#endif + +#if (defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input) + Mode with 0 Frame Syncs */ +#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */ +#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through + cache data writes */ +#define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */ +#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */ +#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */ +#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an + accumulator saturation */ +#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General + Purpose TX or RX modes */ +#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration + registers */ +#define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with + External Frame Syncs */ +#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */ +#define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits + (not a meaningful mode) */ +#define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer + Placement in Memory */ +#define ANOMALY_05000189 /* False Protection Exception */ +#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs + when polarity setting is changed */ +#define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data + corruption */ +#define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding + memory read */ +#define ANOMALY_05000199 /* DMA current address shows wrong value during carry + fix */ +#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during + inactive channels in certain conditions */ +#define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG + situation */ +#define ANOMALY_05000204 /* Incorrect data read with write-through cache and + allocate cache lines on reads only mode */ +#define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA + stopping */ +#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ +#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain + instructions */ +#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ +#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable + state */ +#define ANOMALY_05000220 /* Data Corruption with Cached External Memory and + Non-Cached On-Chip L2 Memory */ +#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ +#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect + data */ +#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate + Differences in certain Conditions */ +#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ +#define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in + multichannel mode */ +#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to + hardware reset */ +#define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of + Control causes failures */ +#define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) mode in certain conditions */ +#define ANOMALY_05000251 /* Exception not generated for MMR accesses in + reserved region */ +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12 + of the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB + exception */ +#define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second + to last instruction in hardware loop */ +#define ANOMALY_05000276 /* Timing requirements change for External Frame + Sync PPI Modes with non-zero PPI_DELAY */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed + in a particular stage */ +#define ANOMALY_05000287 /* A read will receive incorrect data under certain + conditions */ +#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */ +#endif + +#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/arch-bf561/bf561_serial.h b/include/asm-blackfin/arch-bf561/bf561_serial.h new file mode 100644 index 0000000..0810228 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/bf561_serial.h @@ -0,0 +1,78 @@ +/* + * U-boot bf561_serial.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF561_SERIAL_H_ +#define _BF561_SERIAL_H_ + +#define BYTE_REF(addr) (*((volatile char*)addr)) +#define HALFWORD_REF(addr) (*((volatile short*)addr)) +#define WORD_REF(addr) (*((volatile long*)addr)) + +#define UART_THR_LO HALFWORD_REF(UART_THR) +#define UART_RBR_LO HALFWORD_REF(UART_RBR) +#define UART_DLL_LO HALFWORD_REF(UART_DLL) +#define UART_IER_LO HALFWORD_REF(UART_IER) +#define UART_IER_ERBFI 0x01 +#define UART_IER_ETBEI 0x02 +#define UART_IER_ELSI 0x04 +#define UART_IER_EDDSI 0x08 + +#define UART_DLH_LO HALFWORD_REF(UART_DLH) +#define UART_IIR_LO HALFWORD_REF(UART_IIR) +#define UART_IIR_NOINT 0x01 +#define UART_IIR_STATUS 0x06 +#define UART_IIR_LSR 0x06 +#define UART_IIR_RBR 0x04 +#define UART_IIR_THR 0x02 +#define UART_IIR_MSR 0x00 + +#define UART_LCR_LO HALFWORD_REF(UART_LCR) +#define UART_LCR_WLS5 0 +#define UART_LCR_WLS6 0x01 +#define UART_LCR_WLS7 0x02 +#define UART_LCR_WLS8 0x03 +#define UART_LCR_STB 0x04 +#define UART_LCR_PEN 0x08 +#define UART_LCR_EPS 0x10 +#define UART_LCR_SP 0x20 +#define UART_LCR_SB 0x40 +#define UART_LCR_DLAB 0x80 + +#define UART_MCR_LO HALFWORD_REF(UART_MCR) + +#define UART_LSR_LO HALFWORD_REF(UART_LSR) +#define UART_LSR_DR 0x01 +#define UART_LSR_OE 0x02 +#define UART_LSR_PE 0x04 +#define UART_LSR_FE 0x08 +#define UART_LSR_BI 0x10 +#define UART_LSR_THRE 0x20 +#define UART_LSR_TEMT 0x40 + +#define UART_MSR_LO HALFWORD_REF(UART_MSR) +#define UART_SCR_LO HALFWORD_REF(UART_SCR) +#define UART_GCTL_LO HALFWORD_REF(UART_GCTL) +#define UART_GCTL_UCEN 0x01 + +#endif diff --git a/include/asm-blackfin/arch-bf561/cdefBF561.h b/include/asm-blackfin/arch-bf561/cdefBF561.h new file mode 100644 index 0000000..f217ba7 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/cdefBF561.h @@ -0,0 +1,998 @@ +/* + * cdefBF561.h + * + * (c) Copyright 2001-2004 Analog Devices, Inc. All rights reserved. + * + */ + +/* C POINTERS TO SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 */ + +#ifndef _CDEF_BF561_H +#define _CDEF_BF561_H + +/* + * #if !defined(__ADSPBF561__) + * #warning cdefBF561.h should only be included for BF561 chip. + * #endif + */ + +/* include all Core registers and bit definitions */ +#include <asm/arch-bf561/defBF561.h> +#include <asm/arch-common/cdef_LPBlackfin.h> + +/* + * System MMR Register Map + */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define pPLL_CTL (volatile unsigned short *)PLL_CTL +#define pPLL_DIV (volatile unsigned short *)PLL_DIV +#define pVR_CTL (volatile unsigned short *)VR_CTL +#define pPLL_STAT (volatile unsigned short *)PLL_STAT +#define pPLL_LOCKCNT (volatile unsigned short *)PLL_LOCKCNT + +/* + * System Reset and Interrupt Controller registers for + * core A (0xFFC0 0100-0xFFC0 01FF) + */ +#define pSICA_SWRST (volatile unsigned short *)SICA_SWRST +#define pSICA_SYSCR (volatile unsigned short *)SICA_SYSCR +#define pSICA_RVECT (volatile unsigned short *)SICA_RVECT +#define pSICA_IMASK (volatile unsigned long *)SICA_IMASK +#define pSICA_IMASK0 (volatile unsigned long *)SICA_IMASK0 +#define pSICA_IMASK1 (volatile unsigned long *)SICA_IMASK1 +#define pSICA_IAR0 (volatile unsigned long *)SICA_IAR0 +#define pSICA_IAR1 (volatile unsigned long *)SICA_IAR1 +#define pSICA_IAR2 (volatile unsigned long *)SICA_IAR2 +#define pSICA_IAR3 (volatile unsigned long *)SICA_IAR3 +#define pSICA_IAR4 (volatile unsigned long *)SICA_IAR4 +#define pSICA_IAR5 (volatile unsigned long *)SICA_IAR5 +#define pSICA_IAR6 (volatile unsigned long *)SICA_IAR6 +#define pSICA_IAR7 (volatile unsigned long *)SICA_IAR7 +#define pSICA_ISR0 (volatile unsigned long *)SICA_ISR0 +#define pSICA_ISR1 (volatile unsigned long *)SICA_ISR1 +#define pSICA_IWR0 (volatile unsigned long *)SICA_IWR0 +#define pSICA_IWR1 (volatile unsigned long *)SICA_IWR1 + +/* + * System Reset and Interrupt Controller registers for + * Core B (0xFFC0 1100-0xFFC0 11FF) + */ +#define pSICB_SWRST (volatile unsigned short *)SICB_SWRST +#define pSICB_SYSCR (volatile unsigned short *)SICB_SYSCR +#define pSICB_RVECT (volatile unsigned short *)SICB_RVECT +#define pSICB_IMASK0 (volatile unsigned long *)SICB_IMASK0 +#define pSICB_IMASK1 (volatile unsigned long *)SICB_IMASK1 +#define pSICB_IAR0 (volatile unsigned long *)SICB_IAR0 +#define pSICB_IAR1 (volatile unsigned long *)SICB_IAR1 +#define pSICB_IAR2 (volatile unsigned long *)SICB_IAR2 +#define pSICB_IAR3 (volatile unsigned long *)SICB_IAR3 +#define pSICB_IAR4 (volatile unsigned long *)SICB_IAR4 +#define pSICB_IAR5 (volatile unsigned long *)SICB_IAR5 +#define pSICB_IAR6 (volatile unsigned long *)SICB_IAR6 +#define pSICB_IAR7 (volatile unsigned long *)SICB_IAR7 +#define pSICB_ISR0 (volatile unsigned long *)SICB_ISR0 +#define pSICB_ISR1 (volatile unsigned long *)SICB_ISR1 +#define pSICB_IWR0 (volatile unsigned long *)SICB_IWR0 +#define pSICB_IWR1 (volatile unsigned long *)SICB_IWR1 + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define pWDOGA_CTL (volatile unsigned short *)WDOGA_CTL +#define pWDOGA_CNT (volatile unsigned long *)WDOGA_CNT +#define pWDOGA_STAT (volatile unsigned long *)WDOGA_STAT + +/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */ +#define pWDOGB_CTL (volatile unsigned short *)WDOGB_CTL +#define pWDOGB_CNT (volatile unsigned long *)WDOGB_CNT +#define pWDOGB_STAT (volatile unsigned long *)WDOGB_STAT + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ +#define pUART_THR (volatile unsigned short *)UART_THR +#define pUART_RBR (volatile unsigned short *)UART_RBR +#define pUART_DLL (volatile unsigned short *)UART_DLL +#define pUART_IER (volatile unsigned short *)UART_IER +#define pUART_DLH (volatile unsigned short *)UART_DLH +#define pUART_IIR (volatile unsigned short *)UART_IIR +#define pUART_LCR (volatile unsigned short *)UART_LCR +#define pUART_MCR (volatile unsigned short *)UART_MCR +#define pUART_LSR (volatile unsigned short *)UART_LSR +#define pUART_MSR (volatile unsigned short *)UART_MSR +#define pUART_SCR (volatile unsigned short *)UART_SCR +#define pUART_GCTL (volatile unsigned short *)UART_GCTL + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define pSPI_CTL (volatile unsigned short *)SPI_CTL +#define pSPI_FLG (volatile unsigned short *)SPI_FLG +#define pSPI_STAT (volatile unsigned short *)SPI_STAT +#define pSPI_TDBR (volatile unsigned short *)SPI_TDBR +#define pSPI_RDBR (volatile unsigned short *)SPI_RDBR +#define pSPI_BAUD (volatile unsigned short *)SPI_BAUD +#define pSPI_SHADOW (volatile unsigned short *)SPI_SHADOW + +/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */ +#define pTIMER0_CONFIG (volatile unsigned short *)TIMER0_CONFIG +#define pTIMER0_COUNTER (volatile unsigned long *)TIMER0_COUNTER +#define pTIMER0_PERIOD (volatile unsigned long *)TIMER0_PERIOD +#define pTIMER0_WIDTH (volatile unsigned long *)TIMER0_WIDTH +#define pTIMER1_CONFIG (volatile unsigned short *)TIMER1_CONFIG +#define pTIMER1_COUNTER (volatile unsigned long *)TIMER1_COUNTER +#define pTIMER1_PERIOD (volatile unsigned long *)TIMER1_PERIOD +#define pTIMER1_WIDTH (volatile unsigned long *)TIMER1_WIDTH +#define pTIMER2_CONFIG (volatile unsigned short *)TIMER2_CONFIG +#define pTIMER2_COUNTER (volatile unsigned long *)TIMER2_COUNTER +#define pTIMER2_PERIOD (volatile unsigned long *)TIMER2_PERIOD +#define pTIMER2_WIDTH (volatile unsigned long *)TIMER2_WIDTH +#define pTIMER3_CONFIG (volatile unsigned short *)TIMER3_CONFIG +#define pTIMER3_COUNTER (volatile unsigned long *)TIMER3_COUNTER +#define pTIMER3_PERIOD (volatile unsigned long *)TIMER3_PERIOD +#define pTIMER3_WIDTH (volatile unsigned long *)TIMER3_WIDTH +#define pTIMER4_CONFIG (volatile unsigned short *)TIMER4_CONFIG +#define pTIMER4_COUNTER (volatile unsigned long *)TIMER4_COUNTER +#define pTIMER4_PERIOD (volatile unsigned long *)TIMER4_PERIOD +#define pTIMER4_WIDTH (volatile unsigned long *)TIMER4_WIDTH +#define pTIMER5_CONFIG (volatile unsigned short *)TIMER5_CONFIG +#define pTIMER5_COUNTER (volatile unsigned long *)TIMER5_COUNTER +#define pTIMER5_PERIOD (volatile unsigned long *)TIMER5_PERIOD +#define pTIMER5_WIDTH (volatile unsigned long *)TIMER5_WIDTH +#define pTIMER6_CONFIG (volatile unsigned short *)TIMER6_CONFIG +#define pTIMER6_COUNTER (volatile unsigned long *)TIMER6_COUNTER +#define pTIMER6_PERIOD (volatile unsigned long *)TIMER6_PERIOD +#define pTIMER6_WIDTH (volatile unsigned long *)TIMER6_WIDTH +#define pTIMER7_CONFIG (volatile unsigned short *)TIMER7_CONFIG +#define pTIMER7_COUNTER (volatile unsigned long *)TIMER7_COUNTER +#define pTIMER7_PERIOD (volatile unsigned long *)TIMER7_PERIOD +#define pTIMER7_WIDTH (volatile unsigned long *)TIMER7_WIDTH + +/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */ +#define pTMRS8_ENABLE (volatile unsigned short *)TMRS8_ENABLE +#define pTMRS8_DISABLE (volatile unsigned short *)TMRS8_DISABLE +#define pTMRS8_STATUS (volatile unsigned long *)TMRS8_STATUS +#define pTIMER8_CONFIG (volatile unsigned short *)TIMER8_CONFIG +#define pTIMER8_COUNTER (volatile unsigned long *)TIMER8_COUNTER +#define pTIMER8_PERIOD (volatile unsigned long *)TIMER8_PERIOD +#define pTIMER8_WIDTH (volatile unsigned long *)TIMER8_WIDTH +#define pTIMER9_CONFIG (volatile unsigned short *)TIMER9_CONFIG +#define pTIMER9_COUNTER (volatile unsigned long *)TIMER9_COUNTER +#define pTIMER9_PERIOD (volatile unsigned long *)TIMER9_PERIOD +#define pTIMER9_WIDTH (volatile unsigned long *)TIMER9_WIDTH +#define pTIMER10_CONFIG (volatile unsigned short *)TIMER10_CONFIG +#define pTIMER10_COUNTER (volatile unsigned long *)TIMER10_COUNTER +#define pTIMER10_PERIOD (volatile unsigned long *)TIMER10_PERIOD +#define pTIMER10_WIDTH (volatile unsigned long *)TIMER10_WIDTH +#define pTIMER11_CONFIG (volatile unsigned short *)TIMER11_CONFIG +#define pTIMER11_COUNTER (volatile unsigned long *)TIMER11_COUNTER +#define pTIMER11_PERIOD (volatile unsigned long *)TIMER11_PERIOD +#define pTIMER11_WIDTH (volatile unsigned long *)TIMER11_WIDTH +#define pTMRS4_ENABLE (volatile unsigned short *)TMRS4_ENABLE +#define pTMRS4_DISABLE (volatile unsigned short *)TMRS4_DISABLE +#define pTMRS4_STATUS (volatile unsigned long *)TMRS4_STATUS + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define pFIO0_FLAG_D (volatile unsigned short *)FIO0_FLAG_D +#define pFIO0_FLAG_C (volatile unsigned short *)FIO0_FLAG_C +#define pFIO0_FLAG_S (volatile unsigned short *)FIO0_FLAG_S +#define pFIO0_FLAG_T (volatile unsigned short *)FIO0_FLAG_T +#define pFIO0_MASKA_D (volatile unsigned short *)FIO0_MASKA_D +#define pFIO0_MASKA_C (volatile unsigned short *)FIO0_MASKA_C +#define pFIO0_MASKA_S (volatile unsigned short *)FIO0_MASKA_S +#define pFIO0_MASKA_T (volatile unsigned short *)FIO0_MASKA_T +#define pFIO0_MASKB_D (volatile unsigned short *)FIO0_MASKB_D +#define pFIO0_MASKB_C (volatile unsigned short *)FIO0_MASKB_C +#define pFIO0_MASKB_S (volatile unsigned short *)FIO0_MASKB_S +#define pFIO0_MASKB_T (volatile unsigned short *)FIO0_MASKB_T +#define pFIO0_DIR (volatile unsigned short *)FIO0_DIR +#define pFIO0_POLAR (volatile unsigned short *)FIO0_POLAR +#define pFIO0_EDGE (volatile unsigned short *)FIO0_EDGE +#define pFIO0_BOTH (volatile unsigned short *)FIO0_BOTH +#define pFIO0_INEN (volatile unsigned short *)FIO0_INEN + +/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */ +#define pFIO1_FLAG_D (volatile unsigned short *)FIO1_FLAG_D +#define pFIO1_FLAG_C (volatile unsigned short *)FIO1_FLAG_C +#define pFIO1_FLAG_S (volatile unsigned short *)FIO1_FLAG_S +#define pFIO1_FLAG_T (volatile unsigned short *)FIO1_FLAG_T +#define pFIO1_MASKA_D (volatile unsigned short *)FIO1_MASKA_D +#define pFIO1_MASKA_C (volatile unsigned short *)FIO1_MASKA_C +#define pFIO1_MASKA_S (volatile unsigned short *)FIO1_MASKA_S +#define pFIO1_MASKA_T (volatile unsigned short *)FIO1_MASKA_T +#define pFIO1_MASKB_D (volatile unsigned short *)FIO1_MASKB_D +#define pFIO1_MASKB_C (volatile unsigned short *)FIO1_MASKB_C +#define pFIO1_MASKB_S (volatile unsigned short *)FIO1_MASKB_S +#define pFIO1_MASKB_T (volatile unsigned short *)FIO1_MASKB_T +#define pFIO1_DIR (volatile unsigned short *)FIO1_DIR +#define pFIO1_POLAR (volatile unsigned short *)FIO1_POLAR +#define pFIO1_EDGE (volatile unsigned short *)FIO1_EDGE +#define pFIO1_BOTH (volatile unsigned short *)FIO1_BOTH +#define pFIO1_INEN (volatile unsigned short *)FIO1_INEN + +/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */ +#define pFIO2_FLAG_D (volatile unsigned short *)FIO2_FLAG_D +#define pFIO2_FLAG_C (volatile unsigned short *)FIO2_FLAG_C +#define pFIO2_FLAG_S (volatile unsigned short *)FIO2_FLAG_S +#define pFIO2_FLAG_T (volatile unsigned short *)FIO2_FLAG_T +#define pFIO2_MASKA_D (volatile unsigned short *)FIO2_MASKA_D +#define pFIO2_MASKA_C (volatile unsigned short *)FIO2_MASKA_C +#define pFIO2_MASKA_S (volatile unsigned short *)FIO2_MASKA_S +#define pFIO2_MASKA_T (volatile unsigned short *)FIO2_MASKA_T +#define pFIO2_MASKB_D (volatile unsigned short *)FIO2_MASKB_D +#define pFIO2_MASKB_C (volatile unsigned short *)FIO2_MASKB_C +#define pFIO2_MASKB_S (volatile unsigned short *)FIO2_MASKB_S +#define pFIO2_MASKB_T (volatile unsigned short *)FIO2_MASKB_T +#define pFIO2_DIR (volatile unsigned short *)FIO2_DIR +#define pFIO2_POLAR (volatile unsigned short *)FIO2_POLAR +#define pFIO2_EDGE (volatile unsigned short *)FIO2_EDGE +#define pFIO2_BOTH (volatile unsigned short *)FIO2_BOTH +#define pFIO2_INEN (volatile unsigned short *)FIO2_INEN + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define pSPORT0_TCR1 (volatile unsigned short *)SPORT0_TCR1 +#define pSPORT0_TCR2 (volatile unsigned short *)SPORT0_TCR2 +#define pSPORT0_TCLKDIV (volatile unsigned short *)SPORT0_TCLKDIV +#define pSPORT0_TFSDIV (volatile unsigned short *)SPORT0_TFSDIV +#define pSPORT0_TX (volatile unsigned long *)SPORT0_TX +#define pSPORT0_RX (volatile unsigned long *)SPORT0_RX +#define pSPORT0_TX32 ((volatile long *)SPORT0_TX) +#define pSPORT0_RX32 ((volatile long *)SPORT0_RX) +#define pSPORT0_TX16 ((volatile unsigned short *)SPORT0_TX) +#define pSPORT0_RX16 ((volatile unsigned short *)SPORT0_RX) +#define pSPORT0_RCR1 (volatile unsigned short *)SPORT0_RCR1 +#define pSPORT0_RCR2 (volatile unsigned short *)SPORT0_RCR2 +#define pSPORT0_RCLKDIV (volatile unsigned short *)SPORT0_RCLKDIV +#define pSPORT0_RFSDIV (volatile unsigned short *)SPORT0_RFSDIV +#define pSPORT0_STAT (volatile unsigned short *)SPORT0_STAT +#define pSPORT0_CHNL (volatile unsigned short *)SPORT0_CHNL +#define pSPORT0_MCMC1 (volatile unsigned short *)SPORT0_MCMC1 +#define pSPORT0_MCMC2 (volatile unsigned short *)SPORT0_MCMC2 +#define pSPORT0_MTCS0 (volatile unsigned long *)SPORT0_MTCS0 +#define pSPORT0_MTCS1 (volatile unsigned long *)SPORT0_MTCS1 +#define pSPORT0_MTCS2 (volatile unsigned long *)SPORT0_MTCS2 +#define pSPORT0_MTCS3 (volatile unsigned long *)SPORT0_MTCS3 +#define pSPORT0_MRCS0 (volatile unsigned long *)SPORT0_MRCS0 +#define pSPORT0_MRCS1 (volatile unsigned long *)SPORT0_MRCS1 +#define pSPORT0_MRCS2 (volatile unsigned long *)SPORT0_MRCS2 +#define pSPORT0_MRCS3 (volatile unsigned long *)SPORT0_MRCS3 + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define pSPORT1_TCR1 (volatile unsigned short *)SPORT1_TCR1 +#define pSPORT1_TCR2 (volatile unsigned short *)SPORT1_TCR2 +#define pSPORT1_TCLKDIV (volatile unsigned short *)SPORT1_TCLKDIV +#define pSPORT1_TFSDIV (volatile unsigned short *)SPORT1_TFSDIV +#define pSPORT1_TX (volatile unsigned long *)SPORT1_TX +#define pSPORT1_RX (volatile unsigned long *)SPORT1_RX +#define pSPORT1_TX32 ((volatile long *)SPORT1_TX) +#define pSPORT1_RX32 ((volatile long *)SPORT1_RX) +#define pSPORT1_TX16 ((volatile unsigned short *)SPORT1_TX) +#define pSPORT1_RX16 ((volatile unsigned short *)SPORT1_RX) +#define pSPORT1_RCR1 (volatile unsigned short *)SPORT1_RCR1 +#define pSPORT1_RCR2 (volatile unsigned short *)SPORT1_RCR2 +#define pSPORT1_RCLKDIV (volatile unsigned short *)SPORT1_RCLKDIV +#define pSPORT1_RFSDIV (volatile unsigned short *)SPORT1_RFSDIV +#define pSPORT1_STAT (volatile unsigned short *)SPORT1_STAT +#define pSPORT1_CHNL (volatile unsigned short *)SPORT1_CHNL +#define pSPORT1_MCMC1 (volatile unsigned short *)SPORT1_MCMC1 +#define pSPORT1_MCMC2 (volatile unsigned short *)SPORT1_MCMC2 +#define pSPORT1_MTCS0 (volatile unsigned long *)SPORT1_MTCS0 +#define pSPORT1_MTCS1 (volatile unsigned long *)SPORT1_MTCS1 +#define pSPORT1_MTCS2 (volatile unsigned long *)SPORT1_MTCS2 +#define pSPORT1_MTCS3 (volatile unsigned long *)SPORT1_MTCS3 +#define pSPORT1_MRCS0 (volatile unsigned long *)SPORT1_MRCS0 +#define pSPORT1_MRCS1 (volatile unsigned long *)SPORT1_MRCS1 +#define pSPORT1_MRCS2 (volatile unsigned long *)SPORT1_MRCS2 +#define pSPORT1_MRCS3 (volatile unsigned long *)SPORT1_MRCS3 + +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define pEBIU_AMGCTL (volatile unsigned short *)EBIU_AMGCTL +#define pEBIU_AMBCTL0 (volatile unsigned long *)EBIU_AMBCTL0 +#define pEBIU_AMBCTL1 (volatile unsigned long *)EBIU_AMBCTL1 + +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define pEBIU_SDGCTL (volatile unsigned long *)EBIU_SDGCTL +#define pEBIU_SDBCTL (volatile unsigned long *)EBIU_SDBCTL +#define pEBIU_SDRRC (volatile unsigned short *)EBIU_SDRRC +#define pEBIU_SDSTAT (volatile unsigned short *)EBIU_SDSTAT + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF)*/ +#define pPPI0_CONTROL (volatile unsigned short *)PPI0_CONTROL +#define pPPI0_STATUS (volatile unsigned short *)PPI0_STATUS +#define pPPI0_COUNT (volatile unsigned short *)PPI0_COUNT +#define pPPI0_DELAY (volatile unsigned short *)PPI0_DELAY +#define pPPI0_FRAME (volatile unsigned short *)PPI0_FRAME + +/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF)*/ +#define pPPI1_CONTROL (volatile unsigned short *)PPI1_CONTROL +#define pPPI1_STATUS (volatile unsigned short *)PPI1_STATUS +#define pPPI1_COUNT (volatile unsigned short *)PPI1_COUNT +#define pPPI1_DELAY (volatile unsigned short *)PPI1_DELAY +#define pPPI1_FRAME (volatile unsigned short *)PPI1_FRAME + +/*DMA Traffic controls*/ +#define pDMA_TCPER ((volatile unsigned short *)DMA_TCPER) +#define pDMA_TCCNT ((volatile unsigned short *)DMA_TCCNT) +#define pDMA_TC_PER ((volatile unsigned short *)DMA_TC_PER) +#define pDMA_TC_CNT ((volatile unsigned short *)DMA_TC_CNT) + +/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ +#define pDMA1_0_CONFIG (volatile unsigned short *)DMA1_0_CONFIG +#define pDMA1_0_NEXT_DESC_PTR (volatile void **)DMA1_0_NEXT_DESC_PTR +#define pDMA1_0_START_ADDR (volatile void **)DMA1_0_START_ADDR +#define pDMA1_0_X_COUNT (volatile unsigned short *)DMA1_0_X_COUNT +#define pDMA1_0_Y_COUNT (volatile unsigned short *)DMA1_0_Y_COUNT +#define pDMA1_0_X_MODIFY (volatile unsigned short *)DMA1_0_X_MODIFY +#define pDMA1_0_Y_MODIFY (volatile unsigned short *)DMA1_0_Y_MODIFY +#define pDMA1_0_CURR_DESC_PTR (volatile void **)DMA1_0_CURR_DESC_PTR +#define pDMA1_0_CURR_ADDR (volatile void **)DMA1_0_CURR_ADDR +#define pDMA1_0_CURR_X_COUNT (volatile unsigned short *)DMA1_0_CURR_X_COUNT +#define pDMA1_0_CURR_Y_COUNT (volatile unsigned short *)DMA1_0_CURR_Y_COUNT +#define pDMA1_0_IRQ_STATUS (volatile unsigned short *)DMA1_0_IRQ_STATUS +#define pDMA1_0_PERIPHERAL_MAP (volatile unsigned short *)DMA1_0_PERIPHERAL_MAP +#define pDMA1_1_CONFIG (volatile unsigned short *)DMA1_1_CONFIG +#define pDMA1_1_NEXT_DESC_PTR (volatile void **)DMA1_1_NEXT_DESC_PTR +#define pDMA1_1_START_ADDR (volatile void **)DMA1_1_START_ADDR +#define pDMA1_1_X_COUNT (volatile unsigned short *)DMA1_1_X_COUNT +#define pDMA1_1_Y_COUNT (volatile unsigned short *)DMA1_1_Y_COUNT +#define pDMA1_1_X_MODIFY (volatile unsigned short *)DMA1_1_X_MODIFY +#define pDMA1_1_Y_MODIFY (volatile unsigned short *)DMA1_1_Y_MODIFY +#define pDMA1_1_CURR_DESC_PTR (volatile void **)DMA1_1_CURR_DESC_PTR +#define pDMA1_1_CURR_ADDR (volatile void **)DMA1_1_CURR_ADDR +#define pDMA1_1_CURR_X_COUNT (volatile unsigned short *)DMA1_1_CURR_X_COUNT +#define pDMA1_1_CURR_Y_COUNT (volatile unsigned short *)DMA1_1_CURR_Y_COUNT +#define pDMA1_1_IRQ_STATUS (volatile unsigned short *)DMA1_1_IRQ_STATUS +#define pDMA1_1_PERIPHERAL_MAP (volatile unsigned short *)DMA1_1_PERIPHERAL_MAP +#define pDMA1_2_CONFIG (volatile unsigned short *)DMA1_2_CONFIG +#define pDMA1_2_NEXT_DESC_PTR (volatile void **)DMA1_2_NEXT_DESC_PTR +#define pDMA1_2_START_ADDR (volatile void **)DMA1_2_START_ADDR +#define pDMA1_2_X_COUNT (volatile unsigned short *)DMA1_2_X_COUNT +#define pDMA1_2_Y_COUNT (volatile unsigned short *)DMA1_2_Y_COUNT +#define pDMA1_2_X_MODIFY (volatile unsigned short *)DMA1_2_X_MODIFY +#define pDMA1_2_Y_MODIFY (volatile unsigned short *)DMA1_2_Y_MODIFY +#define pDMA1_2_CURR_DESC_PTR (volatile void **)DMA1_2_CURR_DESC_PTR +#define pDMA1_2_CURR_ADDR (volatile void **)DMA1_2_CURR_ADDR +#define pDMA1_2_CURR_X_COUNT (volatile unsigned short *)DMA1_2_CURR_X_COUNT +#define pDMA1_2_CURR_Y_COUNT (volatile unsigned short *)DMA1_2_CURR_Y_COUNT +#define pDMA1_2_IRQ_STATUS (volatile unsigned short *)DMA1_2_IRQ_STATUS +#define pDMA1_2_PERIPHERAL_MAP (volatile unsigned short *)DMA1_2_PERIPHERAL_MAP +#define pDMA1_3_CONFIG (volatile unsigned short *)DMA1_3_CONFIG +#define pDMA1_3_NEXT_DESC_PTR (volatile void **)DMA1_3_NEXT_DESC_PTR +#define pDMA1_3_START_ADDR (volatile void **)DMA1_3_START_ADDR +#define pDMA1_3_X_COUNT (volatile unsigned short *)DMA1_3_X_COUNT +#define pDMA1_3_Y_COUNT (volatile unsigned short *)DMA1_3_Y_COUNT +#define pDMA1_3_X_MODIFY (volatile unsigned short *)DMA1_3_X_MODIFY +#define pDMA1_3_Y_MODIFY (volatile unsigned short *)DMA1_3_Y_MODIFY +#define pDMA1_3_CURR_DESC_PTR (volatile void **)DMA1_3_CURR_DESC_PTR +#define pDMA1_3_CURR_ADDR (volatile void **)DMA1_3_CURR_ADDR +#define pDMA1_3_CURR_X_COUNT (volatile unsigned short *)DMA1_3_CURR_X_COUNT +#define pDMA1_3_CURR_Y_COUNT (volatile unsigned short *)DMA1_3_CURR_Y_COUNT +#define pDMA1_3_IRQ_STATUS (volatile unsigned short *)DMA1_3_IRQ_STATUS +#define pDMA1_3_PERIPHERAL_MAP (volatile unsigned short *)DMA1_3_PERIPHERAL_MAP +#define pDMA1_4_CONFIG (volatile unsigned short *)DMA1_4_CONFIG +#define pDMA1_4_NEXT_DESC_PTR (volatile void **)DMA1_4_NEXT_DESC_PTR +#define pDMA1_4_START_ADDR (volatile void **)DMA1_4_START_ADDR +#define pDMA1_4_X_COUNT (volatile unsigned short *)DMA1_4_X_COUNT +#define pDMA1_4_Y_COUNT (volatile unsigned short *)DMA1_4_Y_COUNT +#define pDMA1_4_X_MODIFY (volatile unsigned short *)DMA1_4_X_MODIFY +#define pDMA1_4_Y_MODIFY (volatile unsigned short *)DMA1_4_Y_MODIFY +#define pDMA1_4_CURR_DESC_PTR (volatile void **)DMA1_4_CURR_DESC_PTR +#define pDMA1_4_CURR_ADDR (volatile void **)DMA1_4_CURR_ADDR +#define pDMA1_4_CURR_X_COUNT (volatile unsigned short *)DMA1_4_CURR_X_COUNT +#define pDMA1_4_CURR_Y_COUNT (volatile unsigned short *)DMA1_4_CURR_Y_COUNT +#define pDMA1_4_IRQ_STATUS (volatile unsigned short *)DMA1_4_IRQ_STATUS +#define pDMA1_4_PERIPHERAL_MAP (volatile unsigned short *)DMA1_4_PERIPHERAL_MAP +#define pDMA1_5_CONFIG (volatile unsigned short *)DMA1_5_CONFIG +#define pDMA1_5_NEXT_DESC_PTR (volatile void **)DMA1_5_NEXT_DESC_PTR +#define pDMA1_5_START_ADDR (volatile void **)DMA1_5_START_ADDR +#define pDMA1_5_X_COUNT (volatile unsigned short *)DMA1_5_X_COUNT +#define pDMA1_5_Y_COUNT (volatile unsigned short *)DMA1_5_Y_COUNT +#define pDMA1_5_X_MODIFY (volatile unsigned short *)DMA1_5_X_MODIFY +#define pDMA1_5_Y_MODIFY (volatile unsigned short *)DMA1_5_Y_MODIFY +#define pDMA1_5_CURR_DESC_PTR (volatile void **)DMA1_5_CURR_DESC_PTR +#define pDMA1_5_CURR_ADDR (volatile void **)DMA1_5_CURR_ADDR +#define pDMA1_5_CURR_X_COUNT (volatile unsigned short *)DMA1_5_CURR_X_COUNT +#define pDMA1_5_CURR_Y_COUNT (volatile unsigned short *)DMA1_5_CURR_Y_COUNT +#define pDMA1_5_IRQ_STATUS (volatile unsigned short *)DMA1_5_IRQ_STATUS +#define pDMA1_5_PERIPHERAL_MAP (volatile unsigned short *)DMA1_5_PERIPHERAL_MAP +#define pDMA1_6_CONFIG (volatile unsigned short *)DMA1_6_CONFIG +#define pDMA1_6_NEXT_DESC_PTR (volatile void **)DMA1_6_NEXT_DESC_PTR +#define pDMA1_6_START_ADDR (volatile void **)DMA1_6_START_ADDR +#define pDMA1_6_X_COUNT (volatile unsigned short *)DMA1_6_X_COUNT +#define pDMA1_6_Y_COUNT (volatile unsigned short *)DMA1_6_Y_COUNT +#define pDMA1_6_X_MODIFY (volatile unsigned short *)DMA1_6_X_MODIFY +#define pDMA1_6_Y_MODIFY (volatile unsigned short *)DMA1_6_Y_MODIFY +#define pDMA1_6_CURR_DESC_PTR (volatile void **)DMA1_6_CURR_DESC_PTR +#define pDMA1_6_CURR_ADDR (volatile void **)DMA1_6_CURR_ADDR +#define pDMA1_6_CURR_X_COUNT (volatile unsigned short *)DMA1_6_CURR_X_COUNT +#define pDMA1_6_CURR_Y_COUNT (volatile unsigned short *)DMA1_6_CURR_Y_COUNT +#define pDMA1_6_IRQ_STATUS (volatile unsigned short *)DMA1_6_IRQ_STATUS +#define pDMA1_6_PERIPHERAL_MAP (volatile unsigned short *)DMA1_6_PERIPHERAL_MAP +#define pDMA1_7_CONFIG (volatile unsigned short *)DMA1_7_CONFIG +#define pDMA1_7_NEXT_DESC_PTR (volatile void **)DMA1_7_NEXT_DESC_PTR +#define pDMA1_7_START_ADDR (volatile void **)DMA1_7_START_ADDR +#define pDMA1_7_X_COUNT (volatile unsigned short *)DMA1_7_X_COUNT +#define pDMA1_7_Y_COUNT (volatile unsigned short *)DMA1_7_Y_COUNT +#define pDMA1_7_X_MODIFY (volatile unsigned short *)DMA1_7_X_MODIFY +#define pDMA1_7_Y_MODIFY (volatile unsigned short *)DMA1_7_Y_MODIFY +#define pDMA1_7_CURR_DESC_PTR (volatile void **)DMA1_7_CURR_DESC_PTR +#define pDMA1_7_CURR_ADDR (volatile void **)DMA1_7_CURR_ADDR +#define pDMA1_7_CURR_X_COUNT (volatile unsigned short *)DMA1_7_CURR_X_COUNT +#define pDMA1_7_CURR_Y_COUNT (volatile unsigned short *)DMA1_7_CURR_Y_COUNT +#define pDMA1_7_IRQ_STATUS (volatile unsigned short *)DMA1_7_IRQ_STATUS +#define pDMA1_7_PERIPHERAL_MAP (volatile unsigned short *)DMA1_7_PERIPHERAL_MAP +#define pDMA1_8_CONFIG (volatile unsigned short *)DMA1_8_CONFIG +#define pDMA1_8_NEXT_DESC_PTR (volatile void **)DMA1_8_NEXT_DESC_PTR +#define pDMA1_8_START_ADDR (volatile void **)DMA1_8_START_ADDR +#define pDMA1_8_X_COUNT (volatile unsigned short *)DMA1_8_X_COUNT +#define pDMA1_8_Y_COUNT (volatile unsigned short *)DMA1_8_Y_COUNT +#define pDMA1_8_X_MODIFY (volatile unsigned short *)DMA1_8_X_MODIFY +#define pDMA1_8_Y_MODIFY (volatile unsigned short *)DMA1_8_Y_MODIFY +#define pDMA1_8_CURR_DESC_PTR (volatile void **)DMA1_8_CURR_DESC_PTR +#define pDMA1_8_CURR_ADDR (volatile void **)DMA1_8_CURR_ADDR +#define pDMA1_8_CURR_X_COUNT (volatile unsigned short *)DMA1_8_CURR_X_COUNT +#define pDMA1_8_CURR_Y_COUNT (volatile unsigned short *)DMA1_8_CURR_Y_COUNT +#define pDMA1_8_IRQ_STATUS (volatile unsigned short *)DMA1_8_IRQ_STATUS +#define pDMA1_8_PERIPHERAL_MAP (volatile unsigned short *)DMA1_8_PERIPHERAL_MAP +#define pDMA1_9_CONFIG (volatile unsigned short *)DMA1_9_CONFIG +#define pDMA1_9_NEXT_DESC_PTR (volatile void **)DMA1_9_NEXT_DESC_PTR +#define pDMA1_9_START_ADDR (volatile void **)DMA1_9_START_ADDR +#define pDMA1_9_X_COUNT (volatile unsigned short *)DMA1_9_X_COUNT +#define pDMA1_9_Y_COUNT (volatile unsigned short *)DMA1_9_Y_COUNT +#define pDMA1_9_X_MODIFY (volatile unsigned short *)DMA1_9_X_MODIFY +#define pDMA1_9_Y_MODIFY (volatile unsigned short *)DMA1_9_Y_MODIFY +#define pDMA1_9_CURR_DESC_PTR (volatile void **)DMA1_9_CURR_DESC_PTR +#define pDMA1_9_CURR_ADDR (volatile void **)DMA1_9_CURR_ADDR +#define pDMA1_9_CURR_X_COUNT (volatile unsigned short *)DMA1_9_CURR_X_COUNT +#define pDMA1_9_CURR_Y_COUNT (volatile unsigned short *)DMA1_9_CURR_Y_COUNT +#define pDMA1_9_IRQ_STATUS (volatile unsigned short *)DMA1_9_IRQ_STATUS +#define pDMA1_9_PERIPHERAL_MAP (volatile unsigned short *)DMA1_9_PERIPHERAL_MAP +#define pDMA1_10_CONFIG (volatile unsigned short *)DMA1_10_CONFIG +#define pDMA1_10_NEXT_DESC_PTR (volatile void **)DMA1_10_NEXT_DESC_PTR +#define pDMA1_10_START_ADDR (volatile void **)DMA1_10_START_ADDR +#define pDMA1_10_X_COUNT (volatile unsigned short *)DMA1_10_X_COUNT +#define pDMA1_10_Y_COUNT (volatile unsigned short *)DMA1_10_Y_COUNT +#define pDMA1_10_X_MODIFY (volatile unsigned short *)DMA1_10_X_MODIFY +#define pDMA1_10_Y_MODIFY (volatile unsigned short *)DMA1_10_Y_MODIFY +#define pDMA1_10_CURR_DESC_PTR (volatile void **)DMA1_10_CURR_DESC_PTR +#define pDMA1_10_CURR_ADDR (volatile void **)DMA1_10_CURR_ADDR +#define pDMA1_10_CURR_X_COUNT (volatile unsigned short *)DMA1_10_CURR_X_COUNT +#define pDMA1_10_CURR_Y_COUNT (volatile unsigned short *)DMA1_10_CURR_Y_COUNT +#define pDMA1_10_IRQ_STATUS (volatile unsigned short *)DMA1_10_IRQ_STATUS +#define pDMA1_10_PERIPHERAL_MAP (volatile unsigned short *)DMA1_10_PERIPHERAL_MAP +#define pDMA1_11_CONFIG (volatile unsigned short *)DMA1_11_CONFIG +#define pDMA1_11_NEXT_DESC_PTR (volatile void **)DMA1_11_NEXT_DESC_PTR +#define pDMA1_11_START_ADDR (volatile void **)DMA1_11_START_ADDR +#define pDMA1_11_X_COUNT (volatile unsigned short *)DMA1_11_X_COUNT +#define pDMA1_11_Y_COUNT (volatile unsigned short *)DMA1_11_Y_COUNT +#define pDMA1_11_X_MODIFY (volatile signed short *)DMA1_11_X_MODIFY +#define pDMA1_11_Y_MODIFY (volatile signed short *)DMA1_11_Y_MODIFY +#define pDMA1_11_CURR_DESC_PTR (volatile void **)DMA1_11_CURR_DESC_PTR +#define pDMA1_11_CURR_ADDR (volatile void **)DMA1_11_CURR_ADDR +#define pDMA1_11_CURR_X_COUNT (volatile unsigned short *)DMA1_11_CURR_X_COUNT +#define pDMA1_11_CURR_Y_COUNT (volatile unsigned short *)DMA1_11_CURR_Y_COUNT +#define pDMA1_11_IRQ_STATUS (volatile unsigned short *)DMA1_11_IRQ_STATUS +#define pDMA1_11_PERIPHERAL_MAP (volatile unsigned short *)DMA1_11_PERIPHERAL_MAP + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF)*/ +#define pMDMA1_D0_CONFIG (volatile unsigned short *)MDMA1_D0_CONFIG +#define pMDMA1_D0_NEXT_DESC_PTR (volatile void **)MDMA1_D0_NEXT_DESC_PTR +#define pMDMA1_D0_START_ADDR (volatile void **)MDMA1_D0_START_ADDR +#define pMDMA1_D0_X_COUNT (volatile unsigned short *)MDMA1_D0_X_COUNT +#define pMDMA1_D0_Y_COUNT (volatile unsigned short *)MDMA1_D0_Y_COUNT +#define pMDMA1_D0_X_MODIFY (volatile signed short *)MDMA1_D0_X_MODIFY +#define pMDMA1_D0_Y_MODIFY (volatile signed short *)MDMA1_D0_Y_MODIFY +#define pMDMA1_D0_CURR_DESC_PTR (volatile void **)MDMA1_D0_CURR_DESC_PTR +#define pMDMA1_D0_CURR_ADDR (volatile void **)MDMA1_D0_CURR_ADDR +#define pMDMA1_D0_CURR_X_COUNT (volatile unsigned short *)MDMA1_D0_CURR_X_COUNT +#define pMDMA1_D0_CURR_Y_COUNT (volatile unsigned short *)MDMA1_D0_CURR_Y_COUNT +#define pMDMA1_D0_IRQ_STATUS (volatile unsigned short *)MDMA1_D0_IRQ_STATUS +#define pMDMA1_D0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D0_PERIPHERAL_MAP +#define pMDMA1_S0_CONFIG (volatile unsigned short *)MDMA1_S0_CONFIG +#define pMDMA1_S0_NEXT_DESC_PTR (volatile void **)MDMA1_S0_NEXT_DESC_PTR +#define pMDMA1_S0_START_ADDR (volatile void **)MDMA1_S0_START_ADDR +#define pMDMA1_S0_X_COUNT (volatile unsigned short *)MDMA1_S0_X_COUNT +#define pMDMA1_S0_Y_COUNT (volatile unsigned short *)MDMA1_S0_Y_COUNT +#define pMDMA1_S0_X_MODIFY (volatile signed short *)MDMA1_S0_X_MODIFY +#define pMDMA1_S0_Y_MODIFY (volatile signed short *)MDMA1_S0_Y_MODIFY +#define pMDMA1_S0_CURR_DESC_PTR (volatile void **)MDMA1_S0_CURR_DESC_PTR +#define pMDMA1_S0_CURR_ADDR (volatile void **)MDMA1_S0_CURR_ADDR +#define pMDMA1_S0_CURR_X_COUNT (volatile unsigned short *)MDMA1_S0_CURR_X_COUNT +#define pMDMA1_S0_CURR_Y_COUNT (volatile unsigned short *)MDMA1_S0_CURR_Y_COUNT +#define pMDMA1_S0_IRQ_STATUS (volatile unsigned short *)MDMA1_S0_IRQ_STATUS +#define pMDMA1_S0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S0_PERIPHERAL_MAP +#define pMDMA1_D1_CONFIG (volatile unsigned short *)MDMA1_D1_CONFIG +#define pMDMA1_D1_NEXT_DESC_PTR (volatile void **)MDMA1_D1_NEXT_DESC_PTR +#define pMDMA1_D1_START_ADDR (volatile void **)MDMA1_D1_START_ADDR +#define pMDMA1_D1_X_COUNT (volatile unsigned short *)MDMA1_D1_X_COUNT +#define pMDMA1_D1_Y_COUNT (volatile unsigned short *)MDMA1_D1_Y_COUNT +#define pMDMA1_D1_X_MODIFY (volatile signed short *)MDMA1_D1_X_MODIFY +#define pMDMA1_D1_Y_MODIFY (volatile signed short *)MDMA1_D1_Y_MODIFY +#define pMDMA1_D1_CURR_DESC_PTR (volatile void **)MDMA1_D1_CURR_DESC_PTR +#define pMDMA1_D1_CURR_ADDR (volatile void **)MDMA1_D1_CURR_ADDR +#define pMDMA1_D1_CURR_X_COUNT (volatile unsigned short *)MDMA1_D1_CURR_X_COUNT +#define pMDMA1_D1_CURR_Y_COUNT (volatile unsigned short *)MDMA1_D1_CURR_Y_COUNT +#define pMDMA1_D1_IRQ_STATUS (volatile unsigned short *)MDMA1_D1_IRQ_STATUS +#define pMDMA1_D1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D1_PERIPHERAL_MAP +#define pMDMA1_S1_CONFIG (volatile unsigned short *)MDMA1_S1_CONFIG +#define pMDMA1_S1_NEXT_DESC_PTR (volatile void **)MDMA1_S1_NEXT_DESC_PTR +#define pMDMA1_S1_START_ADDR (volatile void **)MDMA1_S1_START_ADDR +#define pMDMA1_S1_X_COUNT (volatile unsigned short *)MDMA1_S1_X_COUNT +#define pMDMA1_S1_Y_COUNT (volatile unsigned short *)MDMA1_S1_Y_COUNT +#define pMDMA1_S1_X_MODIFY (volatile signed short *)MDMA1_S1_X_MODIFY +#define pMDMA1_S1_Y_MODIFY (volatile signed short *)MDMA1_S1_Y_MODIFY +#define pMDMA1_S1_CURR_DESC_PTR (volatile void **)MDMA1_S1_CURR_DESC_PTR +#define pMDMA1_S1_CURR_ADDR (volatile void **)MDMA1_S1_CURR_ADDR +#define pMDMA1_S1_CURR_X_COUNT (volatile unsigned short *)MDMA1_S1_CURR_X_COUNT +#define pMDMA1_S1_CURR_Y_COUNT (volatile unsigned short *)MDMA1_S1_CURR_Y_COUNT +#define pMDMA1_S1_IRQ_STATUS (volatile unsigned short *)MDMA1_S1_IRQ_STATUS +#define pMDMA1_S1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S1_PERIPHERAL_MAP + +/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ +#define pDMA2_0_CONFIG (volatile unsigned short *)DMA2_0_CONFIG +#define pDMA2_0_NEXT_DESC_PTR (volatile void **)DMA2_0_NEXT_DESC_PTR +#define pDMA2_0_START_ADDR (volatile void **)DMA2_0_START_ADDR +#define pDMA2_0_X_COUNT (volatile unsigned short *)DMA2_0_X_COUNT +#define pDMA2_0_Y_COUNT (volatile unsigned short *)DMA2_0_Y_COUNT +#define pDMA2_0_X_MODIFY (volatile signed short *)DMA2_0_X_MODIFY +#define pDMA2_0_Y_MODIFY (volatile signed short *)DMA2_0_Y_MODIFY +#define pDMA2_0_CURR_DESC_PTR (volatile void **)DMA2_0_CURR_DESC_PTR +#define pDMA2_0_CURR_ADDR (volatile void **)DMA2_0_CURR_ADDR +#define pDMA2_0_CURR_X_COUNT (volatile unsigned short *)DMA2_0_CURR_X_COUNT +#define pDMA2_0_CURR_Y_COUNT (volatile unsigned short *)DMA2_0_CURR_Y_COUNT +#define pDMA2_0_IRQ_STATUS (volatile unsigned short *)DMA2_0_IRQ_STATUS +#define pDMA2_0_PERIPHERAL_MAP (volatile unsigned short *)DMA2_0_PERIPHERAL_MAP +#define pDMA2_1_CONFIG (volatile unsigned short *)DMA2_1_CONFIG +#define pDMA2_1_NEXT_DESC_PTR (volatile void **)DMA2_1_NEXT_DESC_PTR +#define pDMA2_1_START_ADDR (volatile void **)DMA2_1_START_ADDR +#define pDMA2_1_X_COUNT (volatile unsigned short *)DMA2_1_X_COUNT +#define pDMA2_1_Y_COUNT (volatile unsigned short *)DMA2_1_Y_COUNT +#define pDMA2_1_X_MODIFY (volatile signed short *)DMA2_1_X_MODIFY +#define pDMA2_1_Y_MODIFY (volatile signed short *)DMA2_1_Y_MODIFY +#define pDMA2_1_CURR_DESC_PTR (volatile void **)DMA2_1_CURR_DESC_PTR +#define pDMA2_1_CURR_ADDR (volatile void **)DMA2_1_CURR_ADDR +#define pDMA2_1_CURR_X_COUNT (volatile unsigned short *)DMA2_1_CURR_X_COUNT +#define pDMA2_1_CURR_Y_COUNT (volatile unsigned short *)DMA2_1_CURR_Y_COUNT +#define pDMA2_1_IRQ_STATUS (volatile unsigned short *)DMA2_1_IRQ_STATUS +#define pDMA2_1_PERIPHERAL_MAP (volatile unsigned short *)DMA2_1_PERIPHERAL_MAP +#define pDMA2_2_CONFIG (volatile unsigned short *)DMA2_2_CONFIG +#define pDMA2_2_NEXT_DESC_PTR (volatile void **)DMA2_2_NEXT_DESC_PTR +#define pDMA2_2_START_ADDR (volatile void **)DMA2_2_START_ADDR +#define pDMA2_2_X_COUNT (volatile unsigned short *)DMA2_2_X_COUNT +#define pDMA2_2_Y_COUNT (volatile unsigned short *)DMA2_2_Y_COUNT +#define pDMA2_2_X_MODIFY (volatile signed short *)DMA2_2_X_MODIFY +#define pDMA2_2_Y_MODIFY (volatile signed short *)DMA2_2_Y_MODIFY +#define pDMA2_2_CURR_DESC_PTR (volatile void **)DMA2_2_CURR_DESC_PTR +#define pDMA2_2_CURR_ADDR (volatile void **)DMA2_2_CURR_ADDR +#define pDMA2_2_CURR_X_COUNT (volatile unsigned short *)DMA2_2_CURR_X_COUNT +#define pDMA2_2_CURR_Y_COUNT (volatile unsigned short *)DMA2_2_CURR_Y_COUNT +#define pDMA2_2_IRQ_STATUS (volatile unsigned short *)DMA2_2_IRQ_STATUS +#define pDMA2_2_PERIPHERAL_MAP (volatile unsigned short *)DMA2_2_PERIPHERAL_MAP +#define pDMA2_3_CONFIG (volatile unsigned short *)DMA2_3_CONFIG +#define pDMA2_3_NEXT_DESC_PTR (volatile void **)DMA2_3_NEXT_DESC_PTR +#define pDMA2_3_START_ADDR (volatile void **)DMA2_3_START_ADDR +#define pDMA2_3_X_COUNT (volatile unsigned short *)DMA2_3_X_COUNT +#define pDMA2_3_Y_COUNT (volatile unsigned short *)DMA2_3_Y_COUNT +#define pDMA2_3_X_MODIFY (volatile signed short *)DMA2_3_X_MODIFY +#define pDMA2_3_Y_MODIFY (volatile signed short *)DMA2_3_Y_MODIFY +#define pDMA2_3_CURR_DESC_PTR (volatile void **)DMA2_3_CURR_DESC_PTR +#define pDMA2_3_CURR_ADDR (volatile void **)DMA2_3_CURR_ADDR +#define pDMA2_3_CURR_X_COUNT (volatile unsigned short *)DMA2_3_CURR_X_COUNT +#define pDMA2_3_CURR_Y_COUNT (volatile unsigned short *)DMA2_3_CURR_Y_COUNT +#define pDMA2_3_IRQ_STATUS (volatile unsigned short *)DMA2_3_IRQ_STATUS +#define pDMA2_3_PERIPHERAL_MAP (volatile unsigned short *)DMA2_3_PERIPHERAL_MAP +#define pDMA2_4_CONFIG (volatile unsigned short *)DMA2_4_CONFIG +#define pDMA2_4_NEXT_DESC_PTR (volatile void **)DMA2_4_NEXT_DESC_PTR +#define pDMA2_4_START_ADDR (volatile void **)DMA2_4_START_ADDR +#define pDMA2_4_X_COUNT (volatile unsigned short *)DMA2_4_X_COUNT +#define pDMA2_4_Y_COUNT (volatile unsigned short *)DMA2_4_Y_COUNT +#define pDMA2_4_X_MODIFY (volatile signed short *)DMA2_4_X_MODIFY +#define pDMA2_4_Y_MODIFY (volatile signed short *)DMA2_4_Y_MODIFY +#define pDMA2_4_CURR_DESC_PTR (volatile void **)DMA2_4_CURR_DESC_PTR +#define pDMA2_4_CURR_ADDR (volatile void **)DMA2_4_CURR_ADDR +#define pDMA2_4_CURR_X_COUNT (volatile unsigned short *)DMA2_4_CURR_X_COUNT +#define pDMA2_4_CURR_Y_COUNT (volatile unsigned short *)DMA2_4_CURR_Y_COUNT +#define pDMA2_4_IRQ_STATUS (volatile unsigned short *)DMA2_4_IRQ_STATUS +#define pDMA2_4_PERIPHERAL_MAP (volatile unsigned short *)DMA2_4_PERIPHERAL_MAP +#define pDMA2_5_CONFIG (volatile unsigned short *)DMA2_5_CONFIG +#define pDMA2_5_NEXT_DESC_PTR (volatile void **)DMA2_5_NEXT_DESC_PTR +#define pDMA2_5_START_ADDR (volatile void **)DMA2_5_START_ADDR +#define pDMA2_5_X_COUNT (volatile unsigned short *)DMA2_5_X_COUNT +#define pDMA2_5_Y_COUNT (volatile unsigned short *)DMA2_5_Y_COUNT +#define pDMA2_5_X_MODIFY (volatile signed short *)DMA2_5_X_MODIFY +#define pDMA2_5_Y_MODIFY (volatile signed short *)DMA2_5_Y_MODIFY +#define pDMA2_5_CURR_DESC_PTR (volatile void **)DMA2_5_CURR_DESC_PTR +#define pDMA2_5_CURR_ADDR (volatile void **)DMA2_5_CURR_ADDR +#define pDMA2_5_CURR_X_COUNT (volatile unsigned short *)DMA2_5_CURR_X_COUNT +#define pDMA2_5_CURR_Y_COUNT (volatile unsigned short *)DMA2_5_CURR_Y_COUNT +#define pDMA2_5_IRQ_STATUS (volatile unsigned short *)DMA2_5_IRQ_STATUS +#define pDMA2_5_PERIPHERAL_MAP (volatile unsigned short *)DMA2_5_PERIPHERAL_MAP +#define pDMA2_6_CONFIG (volatile unsigned short *)DMA2_6_CONFIG +#define pDMA2_6_NEXT_DESC_PTR (volatile void **)DMA2_6_NEXT_DESC_PTR +#define pDMA2_6_START_ADDR (volatile void **)DMA2_6_START_ADDR +#define pDMA2_6_X_COUNT (volatile unsigned short *)DMA2_6_X_COUNT +#define pDMA2_6_Y_COUNT (volatile unsigned short *)DMA2_6_Y_COUNT +#define pDMA2_6_X_MODIFY (volatile signed short *)DMA2_6_X_MODIFY +#define pDMA2_6_Y_MODIFY (volatile signed short *)DMA2_6_Y_MODIFY +#define pDMA2_6_CURR_DESC_PTR (volatile void **)DMA2_6_CURR_DESC_PTR +#define pDMA2_6_CURR_ADDR (volatile void **)DMA2_6_CURR_ADDR +#define pDMA2_6_CURR_X_COUNT (volatile unsigned short *)DMA2_6_CURR_X_COUNT +#define pDMA2_6_CURR_Y_COUNT (volatile unsigned short *)DMA2_6_CURR_Y_COUNT +#define pDMA2_6_IRQ_STATUS (volatile unsigned short *)DMA2_6_IRQ_STATUS +#define pDMA2_6_PERIPHERAL_MAP (volatile unsigned short *)DMA2_6_PERIPHERAL_MAP +#define pDMA2_7_CONFIG (volatile unsigned short *)DMA2_7_CONFIG +#define pDMA2_7_NEXT_DESC_PTR (volatile void **)DMA2_7_NEXT_DESC_PTR +#define pDMA2_7_START_ADDR (volatile void **)DMA2_7_START_ADDR +#define pDMA2_7_X_COUNT (volatile unsigned short *)DMA2_7_X_COUNT +#define pDMA2_7_Y_COUNT (volatile unsigned short *)DMA2_7_Y_COUNT +#define pDMA2_7_X_MODIFY (volatile signed short *)DMA2_7_X_MODIFY +#define pDMA2_7_Y_MODIFY (volatile signed short *)DMA2_7_Y_MODIFY +#define pDMA2_7_CURR_DESC_PTR (volatile void **)DMA2_7_CURR_DESC_PTR +#define pDMA2_7_CURR_ADDR (volatile void **)DMA2_7_CURR_ADDR +#define pDMA2_7_CURR_X_COUNT (volatile unsigned short *)DMA2_7_CURR_X_COUNT +#define pDMA2_7_CURR_Y_COUNT (volatile unsigned short *)DMA2_7_CURR_Y_COUNT +#define pDMA2_7_IRQ_STATUS (volatile unsigned short *)DMA2_7_IRQ_STATUS +#define pDMA2_7_PERIPHERAL_MAP (volatile unsigned short *)DMA2_7_PERIPHERAL_MAP +#define pDMA2_8_CONFIG (volatile unsigned short *)DMA2_8_CONFIG +#define pDMA2_8_NEXT_DESC_PTR (volatile void **)DMA2_8_NEXT_DESC_PTR +#define pDMA2_8_START_ADDR (volatile void **)DMA2_8_START_ADDR +#define pDMA2_8_X_COUNT (volatile unsigned short *)DMA2_8_X_COUNT +#define pDMA2_8_Y_COUNT (volatile unsigned short *)DMA2_8_Y_COUNT +#define pDMA2_8_X_MODIFY (volatile signed short *)DMA2_8_X_MODIFY +#define pDMA2_8_Y_MODIFY (volatile signed short *)DMA2_8_Y_MODIFY +#define pDMA2_8_CURR_DESC_PTR (volatile void **)DMA2_8_CURR_DESC_PTR +#define pDMA2_8_CURR_ADDR (volatile void **)DMA2_8_CURR_ADDR +#define pDMA2_8_CURR_X_COUNT (volatile unsigned short *)DMA2_8_CURR_X_COUNT +#define pDMA2_8_CURR_Y_COUNT (volatile unsigned short *)DMA2_8_CURR_Y_COUNT +#define pDMA2_8_IRQ_STATUS (volatile unsigned short *)DMA2_8_IRQ_STATUS +#define pDMA2_8_PERIPHERAL_MAP (volatile unsigned short *)DMA2_8_PERIPHERAL_MAP +#define pDMA2_9_CONFIG (volatile unsigned short *)DMA2_9_CONFIG +#define pDMA2_9_NEXT_DESC_PTR (volatile void **)DMA2_9_NEXT_DESC_PTR +#define pDMA2_9_START_ADDR (volatile void **)DMA2_9_START_ADDR +#define pDMA2_9_X_COUNT (volatile unsigned short *)DMA2_9_X_COUNT +#define pDMA2_9_Y_COUNT (volatile unsigned short *)DMA2_9_Y_COUNT +#define pDMA2_9_X_MODIFY (volatile signed short *)DMA2_9_X_MODIFY +#define pDMA2_9_Y_MODIFY (volatile signed short *)DMA2_9_Y_MODIFY +#define pDMA2_9_CURR_DESC_PTR (volatile void **)DMA2_9_CURR_DESC_PTR +#define pDMA2_9_CURR_ADDR (volatile void **)DMA2_9_CURR_ADDR +#define pDMA2_9_CURR_X_COUNT (volatile unsigned short *)DMA2_9_CURR_X_COUNT +#define pDMA2_9_CURR_Y_COUNT (volatile unsigned short *)DMA2_9_CURR_Y_COUNT +#define pDMA2_9_IRQ_STATUS (volatile unsigned short *)DMA2_9_IRQ_STATUS +#define pDMA2_9_PERIPHERAL_MAP (volatile unsigned short *)DMA2_9_PERIPHERAL_MAP +#define pDMA2_10_CONFIG (volatile unsigned short *)DMA2_10_CONFIG +#define pDMA2_10_NEXT_DESC_PTR (volatile void **)DMA2_10_NEXT_DESC_PTR +#define pDMA2_10_START_ADDR (volatile void **)DMA2_10_START_ADDR +#define pDMA2_10_X_COUNT (volatile unsigned short *)DMA2_10_X_COUNT +#define pDMA2_10_Y_COUNT (volatile unsigned short *)DMA2_10_Y_COUNT +#define pDMA2_10_X_MODIFY (volatile signed short *)DMA2_10_X_MODIFY +#define pDMA2_10_Y_MODIFY (volatile signed short *)DMA2_10_Y_MODIFY +#define pDMA2_10_CURR_DESC_PTR (volatile void **)DMA2_10_CURR_DESC_PTR +#define pDMA2_10_CURR_ADDR (volatile void **)DMA2_10_CURR_ADDR +#define pDMA2_10_CURR_X_COUNT (volatile unsigned short *)DMA2_10_CURR_X_COUNT +#define pDMA2_10_CURR_Y_COUNT (volatile unsigned short *)DMA2_10_CURR_Y_COUNT +#define pDMA2_10_IRQ_STATUS (volatile unsigned short *)DMA2_10_IRQ_STATUS +#define pDMA2_10_PERIPHERAL_MAP (volatile unsigned short *)DMA2_10_PERIPHERAL_MAP +#define pDMA2_11_CONFIG (volatile unsigned short *)DMA2_11_CONFIG +#define pDMA2_11_NEXT_DESC_PTR (volatile void **)DMA2_11_NEXT_DESC_PTR +#define pDMA2_11_START_ADDR (volatile void **)DMA2_11_START_ADDR +#define pDMA2_11_X_COUNT (volatile unsigned short *)DMA2_11_X_COUNT +#define pDMA2_11_Y_COUNT (volatile unsigned short *)DMA2_11_Y_COUNT +#define pDMA2_11_X_MODIFY (volatile signed short *)DMA2_11_X_MODIFY +#define pDMA2_11_Y_MODIFY (volatile signed short *)DMA2_11_Y_MODIFY +#define pDMA2_11_CURR_DESC_PTR (volatile void **)DMA2_11_CURR_DESC_PTR +#define pDMA2_11_CURR_ADDR (volatile void **)DMA2_11_CURR_ADDR +#define pDMA2_11_CURR_X_COUNT (volatile unsigned short *)DMA2_11_CURR_X_COUNT +#define pDMA2_11_CURR_Y_COUNT (volatile unsigned short *)DMA2_11_CURR_Y_COUNT +#define pDMA2_11_IRQ_STATUS (volatile unsigned short *)DMA2_11_IRQ_STATUS +#define pDMA2_11_PERIPHERAL_MAP (volatile unsigned short *)DMA2_11_PERIPHERAL_MAP + +/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */ +#define pMDMA2_D0_CONFIG (volatile unsigned short *)MDMA2_D0_CONFIG +#define pMDMA2_D0_NEXT_DESC_PTR (volatile void **)MDMA2_D0_NEXT_DESC_PTR +#define pMDMA2_D0_START_ADDR (volatile void **)MDMA2_D0_START_ADDR +#define pMDMA2_D0_X_COUNT (volatile unsigned short *)MDMA2_D0_X_COUNT +#define pMDMA2_D0_Y_COUNT (volatile unsigned short *)MDMA2_D0_Y_COUNT +#define pMDMA2_D0_X_MODIFY (volatile signed short *)MDMA2_D0_X_MODIFY +#define pMDMA2_D0_Y_MODIFY (volatile signed short *)MDMA2_D0_Y_MODIFY +#define pMDMA2_D0_CURR_DESC_PTR (volatile void **)MDMA2_D0_CURR_DESC_PTR +#define pMDMA2_D0_CURR_ADDR (volatile void **)MDMA2_D0_CURR_ADDR +#define pMDMA2_D0_CURR_X_COUNT (volatile unsigned short *)MDMA2_D0_CURR_X_COUNT +#define pMDMA2_D0_CURR_Y_COUNT (volatile unsigned short *)MDMA2_D0_CURR_Y_COUNT +#define pMDMA2_D0_IRQ_STATUS (volatile unsigned short *)MDMA2_D0_IRQ_STATUS +#define pMDMA2_D0_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_D0_PERIPHERAL_MAP +#define pMDMA2_S0_CONFIG (volatile unsigned short *)MDMA2_S0_CONFIG +#define pMDMA2_S0_NEXT_DESC_PTR (volatile void **)MDMA2_S0_NEXT_DESC_PTR +#define pMDMA2_S0_START_ADDR (volatile void **)MDMA2_S0_START_ADDR +#define pMDMA2_S0_X_COUNT (volatile unsigned short *)MDMA2_S0_X_COUNT +#define pMDMA2_S0_Y_COUNT (volatile unsigned short *)MDMA2_S0_Y_COUNT +#define pMDMA2_S0_X_MODIFY (volatile signed short *)MDMA2_S0_X_MODIFY +#define pMDMA2_S0_Y_MODIFY (volatile signed short *)MDMA2_S0_Y_MODIFY +#define pMDMA2_S0_CURR_DESC_PTR (volatile void **)MDMA2_S0_CURR_DESC_PTR +#define pMDMA2_S0_CURR_ADDR (volatile void **)MDMA2_S0_CURR_ADDR +#define pMDMA2_S0_CURR_X_COUNT (volatile unsigned short *)MDMA2_S0_CURR_X_COUNT +#define pMDMA2_S0_CURR_Y_COUNT (volatile unsigned short *)MDMA2_S0_CURR_Y_COUNT +#define pMDMA2_S0_IRQ_STATUS (volatile unsigned short *)MDMA2_S0_IRQ_STATUS +#define pMDMA2_S0_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_S0_PERIPHERAL_MAP +#define pMDMA2_D1_CONFIG (volatile unsigned short *)MDMA2_D1_CONFIG +#define pMDMA2_D1_NEXT_DESC_PTR (volatile void **)MDMA2_D1_NEXT_DESC_PTR +#define pMDMA2_D1_START_ADDR (volatile void **)MDMA2_D1_START_ADDR +#define pMDMA2_D1_X_COUNT (volatile unsigned short *)MDMA2_D1_X_COUNT +#define pMDMA2_D1_Y_COUNT (volatile unsigned short *)MDMA2_D1_Y_COUNT +#define pMDMA2_D1_X_MODIFY (volatile signed short *)MDMA2_D1_X_MODIFY +#define pMDMA2_D1_Y_MODIFY (volatile signed short *)MDMA2_D1_Y_MODIFY +#define pMDMA2_D1_CURR_DESC_PTR (volatile void **)MDMA2_D1_CURR_DESC_PTR +#define pMDMA2_D1_CURR_ADDR (volatile void **)MDMA2_D1_CURR_ADDR +#define pMDMA2_D1_CURR_X_COUNT (volatile unsigned short *)MDMA2_D1_CURR_X_COUNT +#define pMDMA2_D1_CURR_Y_COUNT (volatile unsigned short *)MDMA2_D1_CURR_Y_COUNT +#define pMDMA2_D1_IRQ_STATUS (volatile unsigned short *)MDMA2_D1_IRQ_STATUS +#define pMDMA2_D1_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_D1_PERIPHERAL_MAP +#define pMDMA2_S1_CONFIG (volatile unsigned short *)MDMA2_S1_CONFIG +#define pMDMA2_S1_NEXT_DESC_PTR (volatile void **)MDMA2_S1_NEXT_DESC_PTR +#define pMDMA2_S1_START_ADDR (volatile void **)MDMA2_S1_START_ADDR +#define pMDMA2_S1_X_COUNT (volatile unsigned short *)MDMA2_S1_X_COUNT +#define pMDMA2_S1_Y_COUNT (volatile unsigned short *)MDMA2_S1_Y_COUNT +#define pMDMA2_S1_X_MODIFY (volatile signed short *)MDMA2_S1_X_MODIFY +#define pMDMA2_S1_Y_MODIFY (volatile signed short *)MDMA2_S1_Y_MODIFY +#define pMDMA2_S1_CURR_DESC_PTR (volatile void **)MDMA2_S1_CURR_DESC_PTR +#define pMDMA2_S1_CURR_ADDR (volatile void **)MDMA2_S1_CURR_ADDR +#define pMDMA2_S1_CURR_X_COUNT (volatile unsigned short *)MDMA2_S1_CURR_X_COUNT +#define pMDMA2_S1_CURR_Y_COUNT (volatile unsigned short *)MDMA2_S1_CURR_Y_COUNT +#define pMDMA2_S1_IRQ_STATUS (volatile unsigned short *)MDMA2_S1_IRQ_STATUS +#define pMDMA2_S1_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_S1_PERIPHERAL_MAP + +/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */ +#define pIMDMA_D0_CONFIG (volatile unsigned short *)IMDMA_D0_CONFIG +#define pIMDMA_D0_NEXT_DESC_PTR (volatile void **)IMDMA_D0_NEXT_DESC_PTR +#define pIMDMA_D0_START_ADDR (volatile void **)IMDMA_D0_START_ADDR +#define pIMDMA_D0_X_COUNT (volatile unsigned short *)IMDMA_D0_X_COUNT +#define pIMDMA_D0_Y_COUNT (volatile unsigned short *)IMDMA_D0_Y_COUNT +#define pIMDMA_D0_X_MODIFY (volatile signed short *)IMDMA_D0_X_MODIFY +#define pIMDMA_D0_Y_MODIFY (volatile signed short *)IMDMA_D0_Y_MODIFY +#define pIMDMA_D0_CURR_DESC_PTR (volatile void **)IMDMA_D0_CURR_DESC_PTR +#define pIMDMA_D0_CURR_ADDR (volatile void **)IMDMA_D0_CURR_ADDR +#define pIMDMA_D0_CURR_X_COUNT (volatile unsigned short *)IMDMA_D0_CURR_X_COUNT +#define pIMDMA_D0_CURR_Y_COUNT (volatile unsigned short *)IMDMA_D0_CURR_Y_COUNT +#define pIMDMA_D0_IRQ_STATUS (volatile unsigned short *)IMDMA_D0_IRQ_STATUS +#define pIMDMA_S0_CONFIG (volatile unsigned short *)IMDMA_S0_CONFIG +#define pIMDMA_S0_NEXT_DESC_PTR (volatile void **)IMDMA_S0_NEXT_DESC_PTR +#define pIMDMA_S0_START_ADDR (volatile void **)IMDMA_S0_START_ADDR +#define pIMDMA_S0_X_COUNT (volatile unsigned short *)IMDMA_S0_X_COUNT +#define pIMDMA_S0_Y_COUNT (volatile unsigned short *)IMDMA_S0_Y_COUNT +#define pIMDMA_S0_X_MODIFY (volatile signed short *)IMDMA_S0_X_MODIFY +#define pIMDMA_S0_Y_MODIFY (volatile signed short *)IMDMA_S0_Y_MODIFY +#define pIMDMA_S0_CURR_DESC_PTR (volatile void **)IMDMA_S0_CURR_DESC_PTR +#define pIMDMA_S0_CURR_ADDR (volatile void **)IMDMA_S0_CURR_ADDR +#define pIMDMA_S0_CURR_X_COUNT (volatile unsigned short *)IMDMA_S0_CURR_X_COUNT +#define pIMDMA_S0_CURR_Y_COUNT (volatile unsigned short *)IMDMA_S0_CURR_Y_COUNT +#define pIMDMA_S0_IRQ_STATUS (volatile unsigned short *)IMDMA_S0_IRQ_STATUS +#define pIMDMA_D1_CONFIG (volatile unsigned short *)IMDMA_D1_CONFIG +#define pIMDMA_D1_NEXT_DESC_PTR (volatile void **)IMDMA_D1_NEXT_DESC_PTR +#define pIMDMA_D1_START_ADDR (volatile void **)IMDMA_D1_START_ADDR +#define pIMDMA_D1_X_COUNT (volatile unsigned short *)IMDMA_D1_X_COUNT +#define pIMDMA_D1_Y_COUNT (volatile unsigned short *)IMDMA_D1_Y_COUNT +#define pIMDMA_D1_X_MODIFY (volatile signed short *)IMDMA_D1_X_MODIFY +#define pIMDMA_D1_Y_MODIFY (volatile signed short *)IMDMA_D1_Y_MODIFY +#define pIMDMA_D1_CURR_DESC_PTR (volatile void **)IMDMA_D1_CURR_DESC_PTR +#define pIMDMA_D1_CURR_ADDR (volatile void **)IMDMA_D1_CURR_ADDR +#define pIMDMA_D1_CURR_X_COUNT (volatile unsigned short *)IMDMA_D1_CURR_X_COUNT +#define pIMDMA_D1_CURR_Y_COUNT (volatile unsigned short *)IMDMA_D1_CURR_Y_COUNT +#define pIMDMA_D1_IRQ_STATUS (volatile unsigned short *)IMDMA_D1_IRQ_STATUS +#define pIMDMA_S1_CONFIG (volatile unsigned short *)IMDMA_S1_CONFIG +#define pIMDMA_S1_NEXT_DESC_PTR (volatile void **)IMDMA_S1_NEXT_DESC_PTR +#define pIMDMA_S1_START_ADDR (volatile void **)IMDMA_S1_START_ADDR +#define pIMDMA_S1_X_COUNT (volatile unsigned short *)IMDMA_S1_X_COUNT +#define pIMDMA_S1_Y_COUNT (volatile unsigned short *)IMDMA_S1_Y_COUNT +#define pIMDMA_S1_X_MODIFY (volatile signed short *)IMDMA_S1_X_MODIFY +#define pIMDMA_S1_Y_MODIFY (volatile signed short *)IMDMA_S1_Y_MODIFY +#define pIMDMA_S1_CURR_DESC_PTR (volatile void **)IMDMA_S1_CURR_DESC_PTR +#define pIMDMA_S1_CURR_ADDR (volatile void **)IMDMA_S1_CURR_ADDR +#define pIMDMA_S1_CURR_X_COUNT (volatile unsigned short *)IMDMA_S1_CURR_X_COUNT +#define pIMDMA_S1_CURR_Y_COUNT (volatile unsigned short *)IMDMA_S1_CURR_Y_COUNT +#define pIMDMA_S1_IRQ_STATUS (volatile unsigned short *)IMDMA_S1_IRQ_STATUS + +/* + * System Reset and Interrupt Controller registers for + * core A (0xFFC0 0100-0xFFC0 01FF) + */ +#define pSWRST (volatile unsigned short *)SICA_SWRST +#define pSYSCR (volatile unsigned short *)SICA_SYSCR +#define pRVECT (volatile unsigned short *)SICA_RVECT +#define pSIC_SWRST (volatile unsigned short *)SICA_SWRST +#define pSIC_SYSCR (volatile unsigned short *)SICA_SYSCR +#define pSIC_RVECT (volatile unsigned short *)SICA_RVECT +#define pSIC_IMASK (volatile unsigned long *)SICA_IMASK +#define pSIC_IAR0 ((volatile unsigned long *)SICA_IAR0) +#define pSIC_IAR1 (volatile unsigned long *)SICA_IAR1 +#define pSIC_IAR2 (volatile unsigned long *)SICA_IAR2 +#define pSIC_ISR (volatile unsigned long *)SICA_ISR0 +#define pSIC_IWR (volatile unsigned long *)SICA_IWR0 + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define pWDOG_CTL (volatile unsigned short *)WDOGA_CTL +#define pWDOG_CNT (volatile unsigned long *)WDOGA_CNT +#define pWDOG_STAT (volatile unsigned long *)WDOGA_STAT + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define pFIO_FLAG_D (volatile unsigned short *)FIO0_FLAG_D +#define pFIO_FLAG_C (volatile unsigned short *)FIO0_FLAG_C +#define pFIO_FLAG_S (volatile unsigned short *)FIO0_FLAG_S +#define pFIO_FLAG_T (volatile unsigned short *)FIO0_FLAG_T +#define pFIO_MASKA_D (volatile unsigned short *)FIO0_MASKA_D +#define pFIO_MASKA_C (volatile unsigned short *)FIO0_MASKA_C +#define pFIO_MASKA_S (volatile unsigned short *)FIO0_MASKA_S +#define pFIO_MASKA_T (volatile unsigned short *)FIO0_MASKA_T +#define pFIO_MASKB_D (volatile unsigned short *)FIO0_MASKB_D +#define pFIO_MASKB_C (volatile unsigned short *)FIO0_MASKB_C +#define pFIO_MASKB_S (volatile unsigned short *)FIO0_MASKB_S +#define pFIO_MASKB_T (volatile unsigned short *)FIO0_MASKB_T +#define pFIO_DIR (volatile unsigned short *)FIO0_DIR +#define pFIO_POLAR (volatile unsigned short *)FIO0_POLAR +#define pFIO_EDGE (volatile unsigned short *)FIO0_EDGE +#define pFIO_BOTH (volatile unsigned short *)FIO0_BOTH +#define pFIO_INEN (volatile unsigned short *)FIO0_INEN + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF)*/ +#define pPPI_CONTROL (volatile unsigned short *)PPI0_CONTROL +#define pPPI_STATUS (volatile unsigned short *)PPI0_STATUS +#define pPPI_COUNT (volatile unsigned short *)PPI0_COUNT +#define pPPI_DELAY (volatile unsigned short *)PPI0_DELAY +#define pPPI_FRAME (volatile unsigned short *)PPI0_FRAME + +/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ +#define pDMA0_CONFIG (volatile unsigned short *)DMA1_0_CONFIG +#define pDMA0_NEXT_DESC_PTR (volatile void **)DMA1_0_NEXT_DESC_PTR +#define pDMA0_START_ADDR (volatile void **)DMA1_0_START_ADDR +#define pDMA0_X_COUNT (volatile unsigned short *)DMA1_0_X_COUNT +#define pDMA0_Y_COUNT (volatile unsigned short *)DMA1_0_Y_COUNT +#define pDMA0_X_MODIFY (volatile unsigned short *)DMA1_0_X_MODIFY +#define pDMA0_Y_MODIFY (volatile unsigned short *)DMA1_0_Y_MODIFY +#define pDMA0_CURR_DESC_PTR (volatile void **)DMA1_0_CURR_DESC_PTR +#define pDMA0_CURR_ADDR (volatile void **)DMA1_0_CURR_ADDR +#define pDMA0_CURR_X_COUNT (volatile unsigned short *)DMA1_0_CURR_X_COUNT +#define pDMA0_CURR_Y_COUNT (volatile unsigned short *)DMA1_0_CURR_Y_COUNT +#define pDMA0_IRQ_STATUS (volatile unsigned short *)DMA1_0_IRQ_STATUS +#define pDMA0_PERIPHERAL_MAP (volatile unsigned short *)DMA1_0_PERIPHERAL_MAP + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ +#define pMDMA_D0_CONFIG (volatile unsigned short *)MDMA1_D0_CONFIG +#define pMDMA_D0_NEXT_DESC_PTR (volatile void **)MDMA1_D0_NEXT_DESC_PTR +#define pMDMA_D0_START_ADDR (volatile void **)MDMA1_D0_START_ADDR +#define pMDMA_D0_X_COUNT (volatile unsigned short *)MDMA1_D0_X_COUNT +#define pMDMA_D0_Y_COUNT (volatile unsigned short *)MDMA1_D0_Y_COUNT +#define pMDMA_D0_X_MODIFY (volatile unsigned short *)MDMA1_D0_X_MODIFY +#define pMDMA_D0_Y_MODIFY (volatile unsigned short *)MDMA1_D0_Y_MODIFY +#define pMDMA_D0_CURR_DESC_PTR (volatile void **)MDMA1_D0_CURR_DESC_PTR +#define pMDMA_D0_CURR_ADDR (volatile void **)MDMA1_D0_CURR_ADDR +#define pMDMA_D0_CURR_X_COUNT (volatile unsigned short *)MDMA1_D0_CURR_X_COUNT +#define pMDMA_D0_CURR_Y_COUNT (volatile unsigned short *)MDMA1_D0_CURR_Y_COUNT +#define pMDMA_D0_IRQ_STATUS (volatile unsigned short *)MDMA1_D0_IRQ_STATUS +#define pMDMA_D0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D0_PERIPHERAL_MAP +#define pMDMA_S0_CONFIG (volatile unsigned short *)MDMA1_S0_CONFIG +#define pMDMA_S0_NEXT_DESC_PTR (volatile void **)MDMA1_S0_NEXT_DESC_PTR +#define pMDMA_S0_START_ADDR (volatile void **)MDMA1_S0_START_ADDR +#define pMDMA_S0_X_COUNT (volatile unsigned short *)MDMA1_S0_X_COUNT +#define pMDMA_S0_Y_COUNT (volatile unsigned short *)MDMA1_S0_Y_COUNT +#define pMDMA_S0_X_MODIFY (volatile unsigned short *)MDMA1_S0_X_MODIFY +#define pMDMA_S0_Y_MODIFY (volatile unsigned short *)MDMA1_S0_Y_MODIFY +#define pMDMA_S0_CURR_DESC_PTR (volatile void **)MDMA1_S0_CURR_DESC_PTR +#define pMDMA_S0_CURR_ADDR (volatile void **)MDMA1_S0_CURR_ADDR +#define pMDMA_S0_CURR_X_COUNT (volatile unsigned short *)MDMA1_S0_CURR_X_COUNT +#define pMDMA_S0_CURR_Y_COUNT (volatile unsigned short *)MDMA1_S0_CURR_Y_COUNT +#define pMDMA_S0_IRQ_STATUS (volatile unsigned short *)MDMA1_S0_IRQ_STATUS +#define pMDMA_S0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S0_PERIPHERAL_MAP +#define pMDMA_D1_CONFIG (volatile unsigned short *)MDMA1_D1_CONFIG +#define pMDMA_D1_NEXT_DESC_PTR (volatile void **)MDMA1_D1_NEXT_DESC_PTR +#define pMDMA_D1_START_ADDR (volatile void **)MDMA1_D1_START_ADDR +#define pMDMA_D1_X_COUNT (volatile unsigned short *)MDMA1_D1_X_COUNT +#define pMDMA_D1_Y_COUNT (volatile unsigned short *)MDMA1_D1_Y_COUNT +#define pMDMA_D1_X_MODIFY (volatile unsigned short *)MDMA1_D1_X_MODIFY +#define pMDMA_D1_Y_MODIFY (volatile unsigned short *)MDMA1_D1_Y_MODIFY +#define pMDMA_D1_CURR_DESC_PTR (volatile void **)MDMA1_D1_CURR_DESC_PTR +#define pMDMA_D1_CURR_ADDR (volatile void **)MDMA1_D1_CURR_ADDR +#define pMDMA_D1_CURR_X_COUNT (volatile unsigned short *)MDMA1_D1_CURR_X_COUNT +#define pMDMA_D1_CURR_Y_COUNT (volatile unsigned short *)MDMA1_D1_CURR_Y_COUNT +#define pMDMA_D1_IRQ_STATUS (volatile unsigned short *)MDMA1_D1_IRQ_STATUS +#define pMDMA_D1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D1_PERIPHERAL_MAP +#define pMDMA_S1_CONFIG (volatile unsigned short *)MDMA1_S1_CONFIG +#define pMDMA_S1_NEXT_DESC_PTR (volatile void **)MDMA1_S1_NEXT_DESC_PTR +#define pMDMA_S1_START_ADDR (volatile void **)MDMA1_S1_START_ADDR +#define pMDMA_S1_X_COUNT (volatile unsigned short *)MDMA1_S1_X_COUNT +#define pMDMA_S1_Y_COUNT (volatile unsigned short *)MDMA1_S1_Y_COUNT +#define pMDMA_S1_X_MODIFY (volatile unsigned short *)MDMA1_S1_X_MODIFY +#define pMDMA_S1_Y_MODIFY (volatile unsigned short *)MDMA1_S1_Y_MODIFY +#define pMDMA_S1_CURR_DESC_PTR (volatile void **)MDMA1_S1_CURR_DESC_PTR +#define pMDMA_S1_CURR_ADDR (volatile void **)MDMA1_S1_CURR_ADDR +#define pMDMA_S1_CURR_X_COUNT (volatile unsigned short *)MDMA1_S1_CURR_X_COUNT +#define pMDMA_S1_CURR_Y_COUNT (volatile unsigned short *)MDMA1_S1_CURR_Y_COUNT +#define pMDMA_S1_IRQ_STATUS (volatile unsigned short *)MDMA1_S1_IRQ_STATUS +#define pMDMA_S1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S1_PERIPHERAL_MAP + +/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ +#define pDMA1_CONFIG (volatile unsigned short *)DMA2_0_CONFIG +#define pDMA1_NEXT_DESC_PTR (volatile void **)DMA2_0_NEXT_DESC_PTR +#define pDMA1_START_ADDR (volatile void **)DMA2_0_START_ADDR +#define pDMA1_X_COUNT (volatile unsigned short *)DMA2_0_X_COUNT +#define pDMA1_Y_COUNT (volatile unsigned short *)DMA2_0_Y_COUNT +#define pDMA1_X_MODIFY (volatile unsigned short *)DMA2_0_X_MODIFY +#define pDMA1_Y_MODIFY (volatile unsigned short *)DMA2_0_Y_MODIFY +#define pDMA1_CURR_DESC_PTR (volatile void **)DMA2_0_CURR_DESC_PTR +#define pDMA1_CURR_ADDR (volatile void **)DMA2_0_CURR_ADDR +#define pDMA1_CURR_X_COUNT (volatile unsigned short *)DMA2_0_CURR_X_COUNT +#define pDMA1_CURR_Y_COUNT (volatile unsigned short *)DMA2_0_CURR_Y_COUNT +#define pDMA1_IRQ_STATUS (volatile unsigned short *)DMA2_0_IRQ_STATUS +#define pDMA1_PERIPHERAL_MAP (volatile unsigned short *)DMA2_0_PERIPHERAL_MAP +#define pDMA2_CONFIG (volatile unsigned short *)DMA2_1_CONFIG +#define pDMA2_NEXT_DESC_PTR (volatile void **)DMA2_1_NEXT_DESC_PTR +#define pDMA2_START_ADDR (volatile void **)DMA2_1_START_ADDR +#define pDMA2_X_COUNT (volatile unsigned short *)DMA2_1_X_COUNT +#define pDMA2_Y_COUNT (volatile unsigned short *)DMA2_1_Y_COUNT +#define pDMA2_X_MODIFY (volatile unsigned short *)DMA2_1_X_MODIFY +#define pDMA2_Y_MODIFY (volatile unsigned short *)DMA2_1_Y_MODIFY +#define pDMA2_CURR_DESC_PTR (volatile void **)DMA2_1_CURR_DESC_PTR +#define pDMA2_CURR_ADDR (volatile void **)DMA2_1_CURR_ADDR +#define pDMA2_CURR_X_COUNT (volatile unsigned short *)DMA2_1_CURR_X_COUNT +#define pDMA2_CURR_Y_COUNT (volatile unsigned short *)DMA2_1_CURR_Y_COUNT +#define pDMA2_IRQ_STATUS (volatile unsigned short *)DMA2_1_IRQ_STATUS +#define pDMA2_PERIPHERAL_MAP (volatile unsigned short *)DMA2_1_PERIPHERAL_MAP +#define pDMA3_CONFIG (volatile unsigned short *)DMA2_2_CONFIG +#define pDMA3_NEXT_DESC_PTR (volatile void **)DMA2_2_NEXT_DESC_PTR +#define pDMA3_START_ADDR (volatile void **)DMA2_2_START_ADDR +#define pDMA3_X_COUNT (volatile unsigned short *)DMA2_2_X_COUNT +#define pDMA3_Y_COUNT (volatile unsigned short *)DMA2_2_Y_COUNT +#define pDMA3_X_MODIFY (volatile unsigned short *)DMA2_2_X_MODIFY +#define pDMA3_Y_MODIFY (volatile unsigned short *)DMA2_2_Y_MODIFY +#define pDMA3_CURR_DESC_PTR (volatile void **)DMA2_2_CURR_DESC_PTR +#define pDMA3_CURR_ADDR (volatile void **)DMA2_2_CURR_ADDR +#define pDMA3_CURR_X_COUNT (volatile unsigned short *)DMA2_2_CURR_X_COUNT +#define pDMA3_CURR_Y_COUNT (volatile unsigned short *)DMA2_2_CURR_Y_COUNT +#define pDMA3_IRQ_STATUS (volatile unsigned short *)DMA2_2_IRQ_STATUS +#define pDMA3_PERIPHERAL_MAP (volatile unsigned short *)DMA2_2_PERIPHERAL_MAP +#define pDMA4_CONFIG (volatile unsigned short *)DMA2_3_CONFIG +#define pDMA4_NEXT_DESC_PTR (volatile void **)DMA2_3_NEXT_DESC_PTR +#define pDMA4_START_ADDR (volatile void **)DMA2_3_START_ADDR +#define pDMA4_X_COUNT (volatile unsigned short *)DMA2_3_X_COUNT +#define pDMA4_Y_COUNT (volatile unsigned short *)DMA2_3_Y_COUNT +#define pDMA4_X_MODIFY (volatile unsigned short *)DMA2_3_X_MODIFY +#define pDMA4_Y_MODIFY (volatile unsigned short *)DMA2_3_Y_MODIFY +#define pDMA4_CURR_DESC_PTR (volatile void **)DMA2_3_CURR_DESC_PTR +#define pDMA4_CURR_ADDR (volatile void **)DMA2_3_CURR_ADDR +#define pDMA4_CURR_X_COUNT (volatile unsigned short *)DMA2_3_CURR_X_COUNT +#define pDMA4_CURR_Y_COUNT (volatile unsigned short *)DMA2_3_CURR_Y_COUNT +#define pDMA4_IRQ_STATUS (volatile unsigned short *)DMA2_3_IRQ_STATUS +#define pDMA4_PERIPHERAL_MAP (volatile unsigned short *)DMA2_3_PERIPHERAL_MAP +#define pDMA5_CONFIG (volatile unsigned short *)DMA2_4_CONFIG +#define pDMA5_NEXT_DESC_PTR (volatile void **)DMA2_4_NEXT_DESC_PTR +#define pDMA5_START_ADDR (volatile void **)DMA2_4_START_ADDR +#define pDMA5_X_COUNT (volatile unsigned short *)DMA2_4_X_COUNT +#define pDMA5_Y_COUNT (volatile unsigned short *)DMA2_4_Y_COUNT +#define pDMA5_X_MODIFY (volatile unsigned short *)DMA2_4_X_MODIFY +#define pDMA5_Y_MODIFY (volatile unsigned short *)DMA2_4_Y_MODIFY +#define pDMA5_CURR_DESC_PTR (volatile void **)DMA2_4_CURR_DESC_PTR +#define pDMA5_CURR_ADDR (volatile void **)DMA2_4_CURR_ADDR +#define pDMA5_CURR_X_COUNT (volatile unsigned short *)DMA2_4_CURR_X_COUNT +#define pDMA5_CURR_Y_COUNT (volatile unsigned short *)DMA2_4_CURR_Y_COUNT +#define pDMA5_IRQ_STATUS (volatile unsigned short *)DMA2_4_IRQ_STATUS +#define pDMA5_PERIPHERAL_MAP (volatile unsigned short *)DMA2_4_PERIPHERAL_MAP +#define pDMA6_CONFIG (volatile unsigned short *)DMA2_5_CONFIG +#define pDMA6_NEXT_DESC_PTR (volatile void **)DMA2_5_NEXT_DESC_PTR +#define pDMA6_START_ADDR (volatile void **)DMA2_5_START_ADDR +#define pDMA6_X_COUNT (volatile unsigned short *)DMA2_5_X_COUNT +#define pDMA6_Y_COUNT (volatile unsigned short *)DMA2_5_Y_COUNT +#define pDMA6_X_MODIFY (volatile unsigned short *)DMA2_5_X_MODIFY +#define pDMA6_Y_MODIFY (volatile unsigned short *)DMA2_5_Y_MODIFY +#define pDMA6_CURR_DESC_PTR (volatile void **)DMA2_5_CURR_DESC_PTR +#define pDMA6_CURR_ADDR (volatile void **)DMA2_5_CURR_ADDR +#define pDMA6_CURR_X_COUNT (volatile unsigned short *)DMA2_5_CURR_X_COUNT +#define pDMA6_CURR_Y_COUNT (volatile unsigned short *)DMA2_5_CURR_Y_COUNT +#define pDMA6_IRQ_STATUS (volatile unsigned short *)DMA2_5_IRQ_STATUS +#define pDMA6_PERIPHERAL_MAP (volatile unsigned short *)DMA2_5_PERIPHERAL_MAP +#define pDMA7_CONFIG (volatile unsigned short *)DMA2_6_CONFIG +#define pDMA7_NEXT_DESC_PTR (volatile void **)DMA2_6_NEXT_DESC_PTR +#define pDMA7_START_ADDR (volatile void **)DMA2_6_START_ADDR +#define pDMA7_X_COUNT (volatile unsigned short *)DMA2_6_X_COUNT +#define pDMA7_Y_COUNT (volatile unsigned short *)DMA2_6_Y_COUNT +#define pDMA7_X_MODIFY (volatile unsigned short *)DMA2_6_X_MODIFY +#define pDMA7_Y_MODIFY (volatile unsigned short *)DMA2_6_Y_MODIFY +#define pDMA7_CURR_DESC_PTR (volatile void **)DMA2_6_CURR_DESC_PTR +#define pDMA7_CURR_ADDR (volatile void **)DMA2_6_CURR_ADDR +#define pDMA7_CURR_X_COUNT (volatile unsigned short *)DMA2_6_CURR_X_COUNT +#define pDMA7_CURR_Y_COUNT (volatile unsigned short *)DMA2_6_CURR_Y_COUNT +#define pDMA7_IRQ_STATUS (volatile unsigned short *)DMA2_6_IRQ_STATUS +#define pDMA7_PERIPHERAL_MAP (volatile unsigned short *)DMA2_6_PERIPHERAL_MAP + +#endif /* _CDEF_BF561_H */ diff --git a/include/asm-blackfin/arch-bf561/defBF561.h b/include/asm-blackfin/arch-bf561/defBF561.h new file mode 100644 index 0000000..c6e3de5 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/defBF561.h @@ -0,0 +1,1941 @@ +/* + * defBF561.h + * + * (c) Copyright 2001-2003 Analog Devices, Inc. All rights reserved. + * + */ + +/* SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 */ + +#ifndef _DEF_BF561_H +#define _DEF_BF561_H + +/* + * #if !defined(__ADSPBF561__) + * #warning defBF561.h should only be included for BF561 chip. + * #endif + */ + +/* include all Core registers and bit definitions */ +#include <asm/arch-common/def_LPBlackfin.h> + +/* + * Helper macros + * usage: + * P0.H = HI(UART_THR); + * P0.L = LO(UART_THR); + */ + +#define LO(con32) ((con32) & 0xFFFF) +#define lo(con32) ((con32) & 0xFFFF) +#define HI(con32) (((con32) >> 16) & 0xFFFF) +#define hi(con32) (((con32) >> 16) & 0xFFFF) + +/* + * System MMR Register Map + */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define PLL_CTL 0xFFC00000 /* PLL Control register */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ +#define PLL_STAT 0xFFC0000C /* PLL Status register */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register */ + +/* + * System Reset and Interrupt Controller registers for + * core A (0xFFC0 0100-0xFFC0 01FF) + */ +#define SICA_SWRST 0xFFC00100 /* Software Reset register */ +#define SICA_SYSCR 0xFFC00104 /* System Reset Configuration register */ +#define SICA_RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ +#define SICA_IMASK 0xFFC0010C /* SIC Interrupt Mask register 0 */ +#define SICA_IMASK0 0xFFC0010C /* SIC Interrupt Mask register 0 */ +#define SICA_IMASK1 0xFFC00110 /* SIC Interrupt Mask register 1 */ +#define SICA_IAR0 0xFFC00124 /* SIC Interrupt Assignment Register 0 */ +#define SICA_IAR1 0xFFC00128 /* SIC Interrupt Assignment Register 1 */ +#define SICA_IAR2 0xFFC0012C /* SIC Interrupt Assignment Register 2 */ +#define SICA_IAR3 0xFFC00130 /* SIC Interrupt Assignment Register 3 */ +#define SICA_IAR4 0xFFC00134 /* SIC Interrupt Assignment Register 4 */ +#define SICA_IAR5 0xFFC00138 /* SIC Interrupt Assignment Register 5 */ +#define SICA_IAR6 0xFFC0013C /* SIC Interrupt Assignment Register 6 */ +#define SICA_IAR7 0xFFC00140 /* SIC Interrupt Assignment Register 7 */ +#define SICA_ISR0 0xFFC00114 /* SIC Interrupt Status register 0 */ +#define SICA_ISR1 0xFFC00118 /* SIC Interrupt Status register 1 */ +#define SICA_IWR0 0xFFC0011C /* SIC Interrupt Wakeup-Enable register 0 */ +#define SICA_IWR1 0xFFC00120 /* SIC Interrupt Wakeup-Enable register 1 */ + +/* + * System Reset and Interrupt Controller registers for + * Core B (0xFFC0 1100-0xFFC0 11FF) + */ +#define SICB_SWRST 0xFFC01100 /* reserved */ +#define SICB_SYSCR 0xFFC01104 /* reserved */ +#define SICB_RVECT 0xFFC01108 /* SIC Reset Vector Address Register */ +#define SICB_IMASK0 0xFFC0110C /* SIC Interrupt Mask register 0 */ +#define SICB_IMASK1 0xFFC01110 /* SIC Interrupt Mask register 1 */ +#define SICB_IAR0 0xFFC01124 /* SIC Interrupt Assignment Register 0 */ +#define SICB_IAR1 0xFFC01128 /* SIC Interrupt Assignment Register 1 */ +#define SICB_IAR2 0xFFC0112C /* SIC Interrupt Assignment Register 2 */ +#define SICB_IAR3 0xFFC01130 /* SIC Interrupt Assignment Register 3 */ +#define SICB_IAR4 0xFFC01134 /* SIC Interrupt Assignment Register 4 */ +#define SICB_IAR5 0xFFC01138 /* SIC Interrupt Assignment Register 5 */ +#define SICB_IAR6 0xFFC0113C /* SIC Interrupt Assignment Register 6 */ +#define SICB_IAR7 0xFFC01140 /* SIC Interrupt Assignment Register 7 */ +#define SICB_ISR0 0xFFC01114 /* SIC Interrupt Status register 0 */ +#define SICB_ISR1 0xFFC01118 /* SIC Interrupt Status register 1 */ +#define SICB_IWR0 0xFFC0111C /* SIC Interrupt Wakeup-Enable register 0 */ +#define SICB_IWR1 0xFFC01120 /* SIC Interrupt Wakeup-Enable register 1 */ + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define WDOGA_CTL 0xFFC00200 /* Watchdog Control register */ +#define WDOGA_CNT 0xFFC00204 /* Watchdog Count register */ +#define WDOGA_STAT 0xFFC00208 /* Watchdog Status register */ + +/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */ +#define WDOGB_CTL 0xFFC01200 /* Watchdog Control register */ +#define WDOGB_CNT 0xFFC01204 /* Watchdog Count register */ +#define WDOGB_STAT 0xFFC01208 /* Watchdog Status register */ + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART_THR 0xFFC00400 /* Transmit Holding register */ +#define UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART_LCR 0xFFC0040C /* Line Control Register */ +#define UART_MCR 0xFFC00410 /* Modem Control Register */ +#define UART_LSR 0xFFC00414 /* Line Status Register */ +#define UART_MSR 0xFFC00418 /* Modem Status Register */ +#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer0 Configuration register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer0 Counter register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer0 Period register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer0 Width register */ +#define TIMER1_CONFIG 0xFFC00610 /* Timer1 Configuration register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer1 Counter register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer1 Period register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer1 Width register */ +#define TIMER2_CONFIG 0xFFC00620 /* Timer2 Configuration register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer2 Counter register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer2 Period register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer2 Width register */ +#define TIMER3_CONFIG 0xFFC00630 /* Timer3 Configuration register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer3 Counter register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer3 Period register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer3 Width register */ +#define TIMER4_CONFIG 0xFFC00640 /* Timer4 Configuration register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer4 Counter register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer4 Period register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer4 Width register */ +#define TIMER5_CONFIG 0xFFC00650 /* Timer5 Configuration register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer5 Counter register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer5 Period register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer5 Width register */ +#define TIMER6_CONFIG 0xFFC00660 /* Timer6 Configuration register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer6 Counter register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer6 Period register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer6 Width register */ +#define TIMER7_CONFIG 0xFFC00670 /* Timer7 Configuration register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer7 Counter register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer7 Period register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer7 Width register */ +#define TMRS8_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TMRS8_DISABLE 0xFFC00684 /* Timer Disable register */ +#define TMRS8_STATUS 0xFFC00688 /* Timer Status register */ + +/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */ +#define TIMER8_CONFIG 0xFFC01600 /* Timer8 Configuration register */ +#define TIMER8_COUNTER 0xFFC01604 /* Timer8 Counter register */ +#define TIMER8_PERIOD 0xFFC01608 /* Timer8 Period register */ +#define TIMER8_WIDTH 0xFFC0160C /* Timer8 Width register */ +#define TIMER9_CONFIG 0xFFC01610 /* Timer9 Configuration register */ +#define TIMER9_COUNTER 0xFFC01614 /* Timer9 Counter register */ +#define TIMER9_PERIOD 0xFFC01618 /* Timer9 Period register */ +#define TIMER9_WIDTH 0xFFC0161C /* Timer9 Width register */ +#define TIMER10_CONFIG 0xFFC01620 /* Timer10 Configuration register */ +#define TIMER10_COUNTER 0xFFC01624 /* Timer10 Counter register */ +#define TIMER10_PERIOD 0xFFC01628 /* Timer10 Period register */ +#define TIMER10_WIDTH 0xFFC0162C /* Timer10 Width register */ +#define TIMER11_CONFIG 0xFFC01630 /* Timer11 Configuration register */ +#define TIMER11_COUNTER 0xFFC01634 /* Timer11 Counter register */ +#define TIMER11_PERIOD 0xFFC01638 /* Timer11 Period register */ +#define TIMER11_WIDTH 0xFFC0163C /* Timer11 Width register */ +#define TMRS4_ENABLE 0xFFC01640 /* Timer Enable Register */ +#define TMRS4_DISABLE 0xFFC01644 /* Timer Disable register */ +#define TMRS4_STATUS 0xFFC01648 /* Timer Status register */ + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define FIO0_FLAG_D 0xFFC00700 /* Flag Data register */ +#define FIO0_FLAG_C 0xFFC00704 /* Flag Clear register */ +#define FIO0_FLAG_S 0xFFC00708 /* Flag Set register */ +#define FIO0_FLAG_T 0xFFC0070C /* Flag Toggle register */ +#define FIO0_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Data register */ +#define FIO0_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Clear register */ +#define FIO0_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Set register */ +#define FIO0_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Toggle register */ +#define FIO0_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Data register */ +#define FIO0_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Clear register */ +#define FIO0_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Set register */ +#define FIO0_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Toggle register */ +#define FIO0_DIR 0xFFC00730 /* Flag Direction register */ +#define FIO0_POLAR 0xFFC00734 /* Flag Polarity register */ +#define FIO0_EDGE 0xFFC00738 /* Flag Interrupt Sensitivity register */ +#define FIO0_BOTH 0xFFC0073C /* Flag Set on Both Edges register */ +#define FIO0_INEN 0xFFC00740 /* Flag Input Enable register */ + +/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */ +#define FIO1_FLAG_D 0xFFC01500 /* Flag Data register */ +#define FIO1_FLAG_C 0xFFC01504 /* Flag Clear register */ +#define FIO1_FLAG_S 0xFFC01508 /* Flag Set register */ +#define FIO1_FLAG_T 0xFFC0150C /* Flag Toggle register */ +#define FIO1_MASKA_D 0xFFC01510 /* Flag Mask Interrupt A Data register */ +#define FIO1_MASKA_C 0xFFC01514 /* Flag Mask Interrupt A Clear register */ +#define FIO1_MASKA_S 0xFFC01518 /* Flag Mask Interrupt A Set register */ +#define FIO1_MASKA_T 0xFFC0151C /* Flag Mask Interrupt A Toggle register */ +#define FIO1_MASKB_D 0xFFC01520 /* Flag Mask Interrupt B Data register */ +#define FIO1_MASKB_C 0xFFC01524 /* Flag Mask Interrupt B Clear register */ +#define FIO1_MASKB_S 0xFFC01528 /* Flag Mask Interrupt B Set register */ +#define FIO1_MASKB_T 0xFFC0152C /* Flag Mask Interrupt B Toggle register */ +#define FIO1_DIR 0xFFC01530 /* Flag Direction register */ +#define FIO1_POLAR 0xFFC01534 /* Flag Polarity register */ +#define FIO1_EDGE 0xFFC01538 /* Flag Interrupt Sensitivity register */ +#define FIO1_BOTH 0xFFC0153C /* Flag Set on Both Edges register */ +#define FIO1_INEN 0xFFC01540 /* Flag Input Enable register */ + +/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */ +#define FIO2_FLAG_D 0xFFC01700 /* Flag Data register */ +#define FIO2_FLAG_C 0xFFC01704 /* Flag Clear register */ +#define FIO2_FLAG_S 0xFFC01708 /* Flag Set register */ +#define FIO2_FLAG_T 0xFFC0170C /* Flag Toggle register */ +#define FIO2_MASKA_D 0xFFC01710 /* Flag Mask Interrupt A Data register */ +#define FIO2_MASKA_C 0xFFC01714 /* Flag Mask Interrupt A Clear register */ +#define FIO2_MASKA_S 0xFFC01718 /* Flag Mask Interrupt A Set register */ +#define FIO2_MASKA_T 0xFFC0171C /* Flag Mask Interrupt A Toggle register */ +#define FIO2_MASKB_D 0xFFC01720 /* Flag Mask Interrupt B Data register */ +#define FIO2_MASKB_C 0xFFC01724 /* Flag Mask Interrupt B Clear register */ +#define FIO2_MASKB_S 0xFFC01728 /* Flag Mask Interrupt B Set register */ +#define FIO2_MASKB_T 0xFFC0172C /* Flag Mask Interrupt B Toggle register */ +#define FIO2_DIR 0xFFC01730 /* Flag Direction register */ +#define FIO2_POLAR 0xFFC01734 /* Flag Polarity register */ +#define FIO2_EDGE 0xFFC01738 /* Flag Interrupt Sensitivity register */ +#define FIO2_BOTH 0xFFC0173C /* Flag Set on Both Edges register */ +#define FIO2_INEN 0xFFC01740 /* Flag Input Enable register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ + +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */ +#define PPI0_CONTROL 0xFFC01000 /* PPI0 Control register */ +#define PPI0_STATUS 0xFFC01004 /* PPI0 Status register */ +#define PPI0_COUNT 0xFFC01008 /* PPI0 Transfer Count register */ +#define PPI0_DELAY 0xFFC0100C /* PPI0 Delay Count register */ +#define PPI0_FRAME 0xFFC01010 /* PPI0 Frame Length register */ + +/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */ +#define PPI1_CONTROL 0xFFC01300 /* PPI1 Control register */ +#define PPI1_STATUS 0xFFC01304 /* PPI1 Status register */ +#define PPI1_COUNT 0xFFC01308 /* PPI1 Transfer Count register */ +#define PPI1_DELAY 0xFFC0130C /* PPI1 Delay Count register */ +#define PPI1_FRAME 0xFFC01310 /* PPI1 Frame Length register */ + +/* DMA Traffic controls */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ +#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ +#define DMA1_0_CONFIG 0xFFC01C08 /* DMA1 Channel 0 Configuration register */ +#define DMA1_0_NEXT_DESC_PTR 0xFFC01C00 /* DMA1 Channel 0 Next Descripter Ptr Reg */ +#define DMA1_0_START_ADDR 0xFFC01C04 /* DMA1 Channel 0 Start Address */ +#define DMA1_0_X_COUNT 0xFFC01C10 /* DMA1 Channel 0 Inner Loop Count */ +#define DMA1_0_Y_COUNT 0xFFC01C18 /* DMA1 Channel 0 Outer Loop Count */ +#define DMA1_0_X_MODIFY 0xFFC01C14 /* DMA1 Channel 0 Inner Loop Addr Increment */ +#define DMA1_0_Y_MODIFY 0xFFC01C1C /* DMA1 Channel 0 Outer Loop Addr Increment */ +#define DMA1_0_CURR_DESC_PTR 0xFFC01C20 /* DMA1 Channel 0 Current Descriptor Pointer */ +#define DMA1_0_CURR_ADDR 0xFFC01C24 /* DMA1 Channel 0 Current Address Pointer */ +#define DMA1_0_CURR_X_COUNT 0xFFC01C30 /* DMA1 Channel 0 Current Inner Loop Count */ +#define DMA1_0_CURR_Y_COUNT 0xFFC01C38 /* DMA1 Channel 0 Current Outer Loop Count */ +#define DMA1_0_IRQ_STATUS 0xFFC01C28 /* DMA1 Channel 0 Interrupt Status Register */ +#define DMA1_0_PERIPHERAL_MAP 0xFFC01C2C /* DMA1 Channel 0 Peripheral Map Register */ + +#define DMA1_1_CONFIG 0xFFC01C48 /* DMA1 Channel 1 Configuration register */ +#define DMA1_1_NEXT_DESC_PTR 0xFFC01C40 /* DMA1 Channel 1 Next Descripter Ptr Reg */ +#define DMA1_1_START_ADDR 0xFFC01C44 /* DMA1 Channel 1 Start Address */ +#define DMA1_1_X_COUNT 0xFFC01C50 /* DMA1 Channel 1 Inner Loop Count */ +#define DMA1_1_Y_COUNT 0xFFC01C58 /* DMA1 Channel 1 Outer Loop Count */ +#define DMA1_1_X_MODIFY 0xFFC01C54 /* DMA1 Channel 1 Inner Loop Addr Increment */ +#define DMA1_1_Y_MODIFY 0xFFC01C5C /* DMA1 Channel 1 Outer Loop Addr Increment */ +#define DMA1_1_CURR_DESC_PTR 0xFFC01C60 /* DMA1 Channel 1 Current Descriptor Pointer */ +#define DMA1_1_CURR_ADDR 0xFFC01C64 /* DMA1 Channel 1 Current Address Pointer */ +#define DMA1_1_CURR_X_COUNT 0xFFC01C70 /* DMA1 Channel 1 Current Inner Loop Count */ +#define DMA1_1_CURR_Y_COUNT 0xFFC01C78 /* DMA1 Channel 1 Current Outer Loop Count */ +#define DMA1_1_IRQ_STATUS 0xFFC01C68 /* DMA1 Channel 1 Interrupt Status Register */ +#define DMA1_1_PERIPHERAL_MAP 0xFFC01C6C /* DMA1 Channel 1 Peripheral Map Register */ + +#define DMA1_2_CONFIG 0xFFC01C88 /* DMA1 Channel 2 Configuration register */ +#define DMA1_2_NEXT_DESC_PTR 0xFFC01C80 /* DMA1 Channel 2 Next Descripter Ptr Reg */ +#define DMA1_2_START_ADDR 0xFFC01C84 /* DMA1 Channel 2 Start Address */ +#define DMA1_2_X_COUNT 0xFFC01C90 /* DMA1 Channel 2 Inner Loop Count */ +#define DMA1_2_Y_COUNT 0xFFC01C98 /* DMA1 Channel 2 Outer Loop Count */ +#define DMA1_2_X_MODIFY 0xFFC01C94 /* DMA1 Channel 2 Inner Loop Addr Increment */ +#define DMA1_2_Y_MODIFY 0xFFC01C9C /* DMA1 Channel 2 Outer Loop Addr Increment */ +#define DMA1_2_CURR_DESC_PTR 0xFFC01CA0 /* DMA1 Channel 2 Current Descriptor Pointer */ +#define DMA1_2_CURR_ADDR 0xFFC01CA4 /* DMA1 Channel 2 Current Address Pointer */ +#define DMA1_2_CURR_X_COUNT 0xFFC01CB0 /* DMA1 Channel 2 Current Inner Loop Count */ +#define DMA1_2_CURR_Y_COUNT 0xFFC01CB8 /* DMA1 Channel 2 Current Outer Loop Count */ +#define DMA1_2_IRQ_STATUS 0xFFC01CA8 /* DMA1 Channel 2 Interrupt Status Register */ +#define DMA1_2_PERIPHERAL_MAP 0xFFC01CAC /* DMA1 Channel 2 Peripheral Map Register */ + +#define DMA1_3_CONFIG 0xFFC01CC8 /* DMA1 Channel 3 Configuration register */ +#define DMA1_3_NEXT_DESC_PTR 0xFFC01CC0 /* DMA1 Channel 3 Next Descripter Ptr Reg */ +#define DMA1_3_START_ADDR 0xFFC01CC4 /* DMA1 Channel 3 Start Address */ +#define DMA1_3_X_COUNT 0xFFC01CD0 /* DMA1 Channel 3 Inner Loop Count */ +#define DMA1_3_Y_COUNT 0xFFC01CD8 /* DMA1 Channel 3 Outer Loop Count */ +#define DMA1_3_X_MODIFY 0xFFC01CD4 /* DMA1 Channel 3 Inner Loop Addr Increment */ +#define DMA1_3_Y_MODIFY 0xFFC01CDC /* DMA1 Channel 3 Outer Loop Addr Increment */ +#define DMA1_3_CURR_DESC_PTR 0xFFC01CE0 /* DMA1 Channel 3 Current Descriptor Pointer */ +#define DMA1_3_CURR_ADDR 0xFFC01CE4 /* DMA1 Channel 3 Current Address Pointer */ +#define DMA1_3_CURR_X_COUNT 0xFFC01CF0 /* DMA1 Channel 3 Current Inner Loop Count */ +#define DMA1_3_CURR_Y_COUNT 0xFFC01CF8 /* DMA1 Channel 3 Current Outer Loop Count */ +#define DMA1_3_IRQ_STATUS 0xFFC01CE8 /* DMA1 Channel 3 Interrupt Status Register */ +#define DMA1_3_PERIPHERAL_MAP 0xFFC01CEC /* DMA1 Channel 3 Peripheral Map Register */ + +#define DMA1_4_CONFIG 0xFFC01D08 /* DMA1 Channel 4 Configuration register */ +#define DMA1_4_NEXT_DESC_PTR 0xFFC01D00 /* DMA1 Channel 4 Next Descripter Ptr Reg */ +#define DMA1_4_START_ADDR 0xFFC01D04 /* DMA1 Channel 4 Start Address */ +#define DMA1_4_X_COUNT 0xFFC01D10 /* DMA1 Channel 4 Inner Loop Count */ +#define DMA1_4_Y_COUNT 0xFFC01D18 /* DMA1 Channel 4 Outer Loop Count */ +#define DMA1_4_X_MODIFY 0xFFC01D14 /* DMA1 Channel 4 Inner Loop Addr Increment */ +#define DMA1_4_Y_MODIFY 0xFFC01D1C /* DMA1 Channel 4 Outer Loop Addr Increment */ +#define DMA1_4_CURR_DESC_PTR 0xFFC01D20 /* DMA1 Channel 4 Current Descriptor Pointer */ +#define DMA1_4_CURR_ADDR 0xFFC01D24 /* DMA1 Channel 4 Current Address Pointer */ +#define DMA1_4_CURR_X_COUNT 0xFFC01D30 /* DMA1 Channel 4 Current Inner Loop Count */ +#define DMA1_4_CURR_Y_COUNT 0xFFC01D38 /* DMA1 Channel 4 Current Outer Loop Count */ +#define DMA1_4_IRQ_STATUS 0xFFC01D28 /* DMA1 Channel 4 Interrupt Status Register */ +#define DMA1_4_PERIPHERAL_MAP 0xFFC01D2C /* DMA1 Channel 4 Peripheral Map Register */ + +#define DMA1_5_CONFIG 0xFFC01D48 /* DMA1 Channel 5 Configuration register */ +#define DMA1_5_NEXT_DESC_PTR 0xFFC01D40 /* DMA1 Channel 5 Next Descripter Ptr Reg */ +#define DMA1_5_START_ADDR 0xFFC01D44 /* DMA1 Channel 5 Start Address */ +#define DMA1_5_X_COUNT 0xFFC01D50 /* DMA1 Channel 5 Inner Loop Count */ +#define DMA1_5_Y_COUNT 0xFFC01D58 /* DMA1 Channel 5 Outer Loop Count */ +#define DMA1_5_X_MODIFY 0xFFC01D54 /* DMA1 Channel 5 Inner Loop Addr Increment */ +#define DMA1_5_Y_MODIFY 0xFFC01D5C /* DMA1 Channel 5 Outer Loop Addr Increment */ +#define DMA1_5_CURR_DESC_PTR 0xFFC01D60 /* DMA1 Channel 5 Current Descriptor Pointer */ +#define DMA1_5_CURR_ADDR 0xFFC01D64 /* DMA1 Channel 5 Current Address Pointer */ +#define DMA1_5_CURR_X_COUNT 0xFFC01D70 /* DMA1 Channel 5 Current Inner Loop Count */ +#define DMA1_5_CURR_Y_COUNT 0xFFC01D78 /* DMA1 Channel 5 Current Outer Loop Count */ +#define DMA1_5_IRQ_STATUS 0xFFC01D68 /* DMA1 Channel 5 Interrupt Status Register */ +#define DMA1_5_PERIPHERAL_MAP 0xFFC01D6C /* DMA1 Channel 5 Peripheral Map Register */ + +#define DMA1_6_CONFIG 0xFFC01D88 /* DMA1 Channel 6 Configuration register */ +#define DMA1_6_NEXT_DESC_PTR 0xFFC01D80 /* DMA1 Channel 6 Next Descripter Ptr Reg */ +#define DMA1_6_START_ADDR 0xFFC01D84 /* DMA1 Channel 6 Start Address */ +#define DMA1_6_X_COUNT 0xFFC01D90 /* DMA1 Channel 6 Inner Loop Count */ +#define DMA1_6_Y_COUNT 0xFFC01D98 /* DMA1 Channel 6 Outer Loop Count */ +#define DMA1_6_X_MODIFY 0xFFC01D94 /* DMA1 Channel 6 Inner Loop Addr Increment */ +#define DMA1_6_Y_MODIFY 0xFFC01D9C /* DMA1 Channel 6 Outer Loop Addr Increment */ +#define DMA1_6_CURR_DESC_PTR 0xFFC01DA0 /* DMA1 Channel 6 Current Descriptor Pointer */ +#define DMA1_6_CURR_ADDR 0xFFC01DA4 /* DMA1 Channel 6 Current Address Pointer */ +#define DMA1_6_CURR_X_COUNT 0xFFC01DB0 /* DMA1 Channel 6 Current Inner Loop Count */ +#define DMA1_6_CURR_Y_COUNT 0xFFC01DB8 /* DMA1 Channel 6 Current Outer Loop Count */ +#define DMA1_6_IRQ_STATUS 0xFFC01DA8 /* DMA1 Channel 6 Interrupt Status Register */ +#define DMA1_6_PERIPHERAL_MAP 0xFFC01DAC /* DMA1 Channel 6 Peripheral Map Register */ + +#define DMA1_7_CONFIG 0xFFC01DC8 /* DMA1 Channel 7 Configuration register */ +#define DMA1_7_NEXT_DESC_PTR 0xFFC01DC0 /* DMA1 Channel 7 Next Descripter Ptr Reg */ +#define DMA1_7_START_ADDR 0xFFC01DC4 /* DMA1 Channel 7 Start Address */ +#define DMA1_7_X_COUNT 0xFFC01DD0 /* DMA1 Channel 7 Inner Loop Count */ +#define DMA1_7_Y_COUNT 0xFFC01DD8 /* DMA1 Channel 7 Outer Loop Count */ +#define DMA1_7_X_MODIFY 0xFFC01DD4 /* DMA1 Channel 7 Inner Loop Addr Increment */ +#define DMA1_7_Y_MODIFY 0xFFC01DDC /* DMA1 Channel 7 Outer Loop Addr Increment */ +#define DMA1_7_CURR_DESC_PTR 0xFFC01DE0 /* DMA1 Channel 7 Current Descriptor Pointer */ +#define DMA1_7_CURR_ADDR 0xFFC01DE4 /* DMA1 Channel 7 Current Address Pointer */ +#define DMA1_7_CURR_X_COUNT 0xFFC01DF0 /* DMA1 Channel 7 Current Inner Loop Count */ +#define DMA1_7_CURR_Y_COUNT 0xFFC01DF8 /* DMA1 Channel 7 Current Outer Loop Count */ +#define DMA1_7_IRQ_STATUS 0xFFC01DE8 /* DMA1 Channel 7 Interrupt Status Register */ +#define DMA1_7_PERIPHERAL_MAP 0xFFC01DEC /* DMA1 Channel 7 Peripheral Map Register */ + +#define DMA1_8_CONFIG 0xFFC01E08 /* DMA1 Channel 8 Configuration register */ +#define DMA1_8_NEXT_DESC_PTR 0xFFC01E00 /* DMA1 Channel 8 Next Descripter Ptr Reg */ +#define DMA1_8_START_ADDR 0xFFC01E04 /* DMA1 Channel 8 Start Address */ +#define DMA1_8_X_COUNT 0xFFC01E10 /* DMA1 Channel 8 Inner Loop Count */ +#define DMA1_8_Y_COUNT 0xFFC01E18 /* DMA1 Channel 8 Outer Loop Count */ +#define DMA1_8_X_MODIFY 0xFFC01E14 /* DMA1 Channel 8 Inner Loop Addr Increment */ +#define DMA1_8_Y_MODIFY 0xFFC01E1C /* DMA1 Channel 8 Outer Loop Addr Increment */ +#define DMA1_8_CURR_DESC_PTR 0xFFC01E20 /* DMA1 Channel 8 Current Descriptor Pointer */ +#define DMA1_8_CURR_ADDR 0xFFC01E24 /* DMA1 Channel 8 Current Address Pointer */ +#define DMA1_8_CURR_X_COUNT 0xFFC01E30 /* DMA1 Channel 8 Current Inner Loop Count */ +#define DMA1_8_CURR_Y_COUNT 0xFFC01E38 /* DMA1 Channel 8 Current Outer Loop Count */ +#define DMA1_8_IRQ_STATUS 0xFFC01E28 /* DMA1 Channel 8 Interrupt Status Register */ +#define DMA1_8_PERIPHERAL_MAP 0xFFC01E2C /* DMA1 Channel 8 Peripheral Map Register */ + +#define DMA1_9_CONFIG 0xFFC01E48 /* DMA1 Channel 9 Configuration register */ +#define DMA1_9_NEXT_DESC_PTR 0xFFC01E40 /* DMA1 Channel 9 Next Descripter Ptr Reg */ +#define DMA1_9_START_ADDR 0xFFC01E44 /* DMA1 Channel 9 Start Address */ +#define DMA1_9_X_COUNT 0xFFC01E50 /* DMA1 Channel 9 Inner Loop Count */ +#define DMA1_9_Y_COUNT 0xFFC01E58 /* DMA1 Channel 9 Outer Loop Count */ +#define DMA1_9_X_MODIFY 0xFFC01E54 /* DMA1 Channel 9 Inner Loop Addr Increment */ +#define DMA1_9_Y_MODIFY 0xFFC01E5C /* DMA1 Channel 9 Outer Loop Addr Increment */ +#define DMA1_9_CURR_DESC_PTR 0xFFC01E60 /* DMA1 Channel 9 Current Descriptor Pointer */ +#define DMA1_9_CURR_ADDR 0xFFC01E64 /* DMA1 Channel 9 Current Address Pointer */ +#define DMA1_9_CURR_X_COUNT 0xFFC01E70 /* DMA1 Channel 9 Current Inner Loop Count */ +#define DMA1_9_CURR_Y_COUNT 0xFFC01E78 /* DMA1 Channel 9 Current Outer Loop Count */ +#define DMA1_9_IRQ_STATUS 0xFFC01E68 /* DMA1 Channel 9 Interrupt Status Register */ +#define DMA1_9_PERIPHERAL_MAP 0xFFC01E6C /* DMA1 Channel 9 Peripheral Map Register */ + +#define DMA1_10_CONFIG 0xFFC01E88 /* DMA1 Channel 10 Configuration register */ +#define DMA1_10_NEXT_DESC_PTR 0xFFC01E80 /* DMA1 Channel 10 Next Descripter Ptr Reg */ +#define DMA1_10_START_ADDR 0xFFC01E84 /* DMA1 Channel 10 Start Address */ +#define DMA1_10_X_COUNT 0xFFC01E90 /* DMA1 Channel 10 Inner Loop Count */ +#define DMA1_10_Y_COUNT 0xFFC01E98 /* DMA1 Channel 10 Outer Loop Count */ +#define DMA1_10_X_MODIFY 0xFFC01E94 /* DMA1 Channel 10 Inner Loop Addr Increment */ +#define DMA1_10_Y_MODIFY 0xFFC01E9C /* DMA1 Channel 10 Outer Loop Addr Increment */ +#define DMA1_10_CURR_DESC_PTR 0xFFC01EA0 /* DMA1 Channel 10 Current Descriptor Pointer */ +#define DMA1_10_CURR_ADDR 0xFFC01EA4 /* DMA1 Channel 10 Current Address Pointer */ +#define DMA1_10_CURR_X_COUNT 0xFFC01EB0 /* DMA1 Channel 10 Current Inner Loop Count */ +#define DMA1_10_CURR_Y_COUNT 0xFFC01EB8 /* DMA1 Channel 10 Current Outer Loop Count */ +#define DMA1_10_IRQ_STATUS 0xFFC01EA8 /* DMA1 Channel 10 Interrupt Status Register */ +#define DMA1_10_PERIPHERAL_MAP 0xFFC01EAC /* DMA1 Channel 10 Peripheral Map Register */ + +#define DMA1_11_CONFIG 0xFFC01EC8 /* DMA1 Channel 11 Configuration register */ +#define DMA1_11_NEXT_DESC_PTR 0xFFC01EC0 /* DMA1 Channel 11 Next Descripter Ptr Reg */ +#define DMA1_11_START_ADDR 0xFFC01EC4 /* DMA1 Channel 11 Start Address */ +#define DMA1_11_X_COUNT 0xFFC01ED0 /* DMA1 Channel 11 Inner Loop Count */ +#define DMA1_11_Y_COUNT 0xFFC01ED8 /* DMA1 Channel 11 Outer Loop Count */ +#define DMA1_11_X_MODIFY 0xFFC01ED4 /* DMA1 Channel 11 Inner Loop Addr Increment */ +#define DMA1_11_Y_MODIFY 0xFFC01EDC /* DMA1 Channel 11 Outer Loop Addr Increment */ +#define DMA1_11_CURR_DESC_PTR 0xFFC01EE0 /* DMA1 Channel 11 Current Descriptor Pointer */ +#define DMA1_11_CURR_ADDR 0xFFC01EE4 /* DMA1 Channel 11 Current Address Pointer */ +#define DMA1_11_CURR_X_COUNT 0xFFC01EF0 /* DMA1 Channel 11 Current Inner Loop Count */ +#define DMA1_11_CURR_Y_COUNT 0xFFC01EF8 /* DMA1 Channel 11 Current Outer Loop Count */ +#define DMA1_11_IRQ_STATUS 0xFFC01EE8 /* DMA1 Channel 11 Interrupt Status Register */ +#define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC /* DMA1 Channel 11 Peripheral Map Register */ + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ +#define MDMA1_D0_CONFIG 0xFFC01F08 /* MemDMA1 Stream 0 Destination Configuration */ +#define MDMA1_D0_NEXT_DESC_PTR 0xFFC01F00 /* MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA1_D0_START_ADDR 0xFFC01F04 /* MemDMA1 Stream 0 Destination Start Address */ +#define MDMA1_D0_X_COUNT 0xFFC01F10 /* MemDMA1 Stream 0 Destination Inner-Loop Count */ +#define MDMA1_D0_Y_COUNT 0xFFC01F18 /* MemDMA1 Stream 0 Destination Outer-Loop Count */ +#define MDMA1_D0_X_MODIFY 0xFFC01F14 /* MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA1_D0_Y_MODIFY 0xFFC01F1C /* MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA1_D0_CURR_DESC_PTR 0xFFC01F20 /* MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA1_D0_CURR_ADDR 0xFFC01F24 /* MemDMA1 Stream 0 Destination Current Address */ +#define MDMA1_D0_CURR_X_COUNT 0xFFC01F30 /* MemDMA1 Stream 0 Dest Current Inner-Loop Count */ +#define MDMA1_D0_CURR_Y_COUNT 0xFFC01F38 /* MemDMA1 Stream 0 Dest Current Outer-Loop Count */ +#define MDMA1_D0_IRQ_STATUS 0xFFC01F28 /* MemDMA1 Stream 0 Destination Interrupt/Status */ +#define MDMA1_D0_PERIPHERAL_MAP 0xFFC01F2C /* MemDMA1 Stream 0 Destination Peripheral Map */ + +#define MDMA1_S0_CONFIG 0xFFC01F48 /* MemDMA1 Stream 0 Source Configuration */ +#define MDMA1_S0_NEXT_DESC_PTR 0xFFC01F40 /* MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA1_S0_START_ADDR 0xFFC01F44 /* MemDMA1 Stream 0 Source Start Address */ +#define MDMA1_S0_X_COUNT 0xFFC01F50 /* MemDMA1 Stream 0 Source Inner-Loop Count */ +#define MDMA1_S0_Y_COUNT 0xFFC01F58 /* MemDMA1 Stream 0 Source Outer-Loop Count */ +#define MDMA1_S0_X_MODIFY 0xFFC01F54 /* MemDMA1 Stream 0 Source Inner-Loop Address-Increment */ +#define MDMA1_S0_Y_MODIFY 0xFFC01F5C /* MemDMA1 Stream 0 Source Outer-Loop Address-Increment */ +#define MDMA1_S0_CURR_DESC_PTR 0xFFC01F60 /* MemDMA1 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA1_S0_CURR_ADDR 0xFFC01F64 /* MemDMA1 Stream 0 Source Current Address */ +#define MDMA1_S0_CURR_X_COUNT 0xFFC01F70 /* MemDMA1 Stream 0 Source Current Inner-Loop Count */ +#define MDMA1_S0_CURR_Y_COUNT ` 0xFFC01F78 /* MemDMA1 Stream 0 Source Current Outer-Loop Count */ +#define MDMA1_S0_IRQ_STATUS 0xFFC01F68 /* MemDMA1 Stream 0 Source Interrupt/Status */ +#define MDMA1_S0_PERIPHERAL_MAP 0xFFC01F6C /* MemDMA1 Stream 0 Source Peripheral Map */ + +#define MDMA1_D1_CONFIG 0xFFC01F88 /* MemDMA1 Stream 1 Destination Configuration */ +#define MDMA1_D1_NEXT_DESC_PTR 0xFFC01F80 /* MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA1_D1_START_ADDR 0xFFC01F84 /* MemDMA1 Stream 1 Destination Start Address */ +#define MDMA1_D1_X_COUNT 0xFFC01F90 /* MemDMA1 Stream 1 Destination Inner-Loop Count */ +#define MDMA1_D1_Y_COUNT 0xFFC01F98 /* MemDMA1 Stream 1 Destination Outer-Loop Count */ +#define MDMA1_D1_X_MODIFY 0xFFC01F94 /* MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA1_D1_Y_MODIFY 0xFFC01F9C /* MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA1_D1_CURR_DESC_PTR 0xFFC01FA0 /* MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */ +#define MDMA1_D1_CURR_ADDR 0xFFC01FA4 /* MemDMA1 Stream 1 Dest Current Address */ +#define MDMA1_D1_CURR_X_COUNT 0xFFC01FB0 /* MemDMA1 Stream 1 Dest Current Inner-Loop Count */ +#define MDMA1_D1_CURR_Y_COUNT 0xFFC01FB8 /* MemDMA1 Stream 1 Dest Current Outer-Loop Count */ +#define MDMA1_D1_IRQ_STATUS 0xFFC01FA8 /* MemDMA1 Stream 1 Dest Interrupt/Status */ +#define MDMA1_D1_PERIPHERAL_MAP 0xFFC01FAC /* MemDMA1 Stream 1 Dest Peripheral Map */ + +#define MDMA1_S1_CONFIG 0xFFC01FC8 /* MemDMA1 Stream 1 Source Configuration */ +#define MDMA1_S1_NEXT_DESC_PTR 0xFFC01FC0 /* MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA1_S1_START_ADDR 0xFFC01FC4 /* MemDMA1 Stream 1 Source Start Address */ +#define MDMA1_S1_X_COUNT 0xFFC01FD0 /* MemDMA1 Stream 1 Source Inner-Loop Count */ +#define MDMA1_S1_Y_COUNT 0xFFC01FD8 /* MemDMA1 Stream 1 Source Outer-Loop Count */ +#define MDMA1_S1_X_MODIFY 0xFFC01FD4 /* MemDMA1 Stream 1 Source Inner-Loop Address-Increment */ +#define MDMA1_S1_Y_MODIFY 0xFFC01FDC /* MemDMA1 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA1_S1_CURR_DESC_PTR 0xFFC01FE0 /* MemDMA1 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA1_S1_CURR_ADDR 0xFFC01FE4 /* MemDMA1 Stream 1 Source Current Address */ +#define MDMA1_S1_CURR_X_COUNT 0xFFC01FF0 /* MemDMA1 Stream 1 Source Current Inner-Loop Count */ +#define MDMA1_S1_CURR_Y_COUNT 0xFFC01FF8 /* MemDMA1 Stream 1 Source Current Outer-Loop Count */ +#define MDMA1_S1_IRQ_STATUS 0xFFC01FE8 /* MemDMA1 Stream 1 Source Interrupt/Status */ +#define MDMA1_S1_PERIPHERAL_MAP 0xFFC01FEC /* MemDMA1 Stream 1 Source Peripheral Map */ + +/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ +#define DMA2_0_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */ +#define DMA2_0_NEXT_DESC_PTR 0xFFC00C00 /* DMA2 Channel 0 Next Descripter Ptr Reg */ +#define DMA2_0_START_ADDR 0xFFC00C04 /* DMA2 Channel 0 Start Address */ +#define DMA2_0_X_COUNT 0xFFC00C10 /* DMA2 Channel 0 Inner Loop Count */ +#define DMA2_0_Y_COUNT 0xFFC00C18 /* DMA2 Channel 0 Outer Loop Count */ +#define DMA2_0_X_MODIFY 0xFFC00C14 /* DMA2 Channel 0 Inner Loop Addr Increment */ +#define DMA2_0_Y_MODIFY 0xFFC00C1C /* DMA2 Channel 0 Outer Loop Addr Increment */ +#define DMA2_0_CURR_DESC_PTR 0xFFC00C20 /* DMA2 Channel 0 Current Descriptor Pointer */ +#define DMA2_0_CURR_ADDR 0xFFC00C24 /* DMA2 Channel 0 Current Address Pointer */ +#define DMA2_0_CURR_X_COUNT 0xFFC00C30 /* DMA2 Channel 0 Current Inner Loop Count */ +#define DMA2_0_CURR_Y_COUNT 0xFFC00C38 /* DMA2 Channel 0 Current Outer Loop Count */ +#define DMA2_0_IRQ_STATUS 0xFFC00C28 /* DMA2 Channel 0 Interrupt Status Register */ +#define DMA2_0_PERIPHERAL_MAP 0xFFC00C2C /* DMA2 Channel 0 Peripheral Map Register */ + +#define DMA2_1_CONFIG 0xFFC00C48 /* DMA2 Channel 1 Configuration register */ +#define DMA2_1_NEXT_DESC_PTR 0xFFC00C40 /* DMA2 Channel 1 Next Descripter Ptr Reg */ +#define DMA2_1_START_ADDR 0xFFC00C44 /* DMA2 Channel 1 Start Address */ +#define DMA2_1_X_COUNT 0xFFC00C50 /* DMA2 Channel 1 Inner Loop Count */ +#define DMA2_1_Y_COUNT 0xFFC00C58 /* DMA2 Channel 1 Outer Loop Count */ +#define DMA2_1_X_MODIFY 0xFFC00C54 /* DMA2 Channel 1 Inner Loop Addr Increment */ +#define DMA2_1_Y_MODIFY 0xFFC00C5C /* DMA2 Channel 1 Outer Loop Addr Increment */ +#define DMA2_1_CURR_DESC_PTR 0xFFC00C60 /* DMA2 Channel 1 Current Descriptor Pointer */ +#define DMA2_1_CURR_ADDR 0xFFC00C64 /* DMA2 Channel 1 Current Address Pointer */ +#define DMA2_1_CURR_X_COUNT 0xFFC00C70 /* DMA2 Channel 1 Current Inner Loop Count */ +#define DMA2_1_CURR_Y_COUNT 0xFFC00C78 /* DMA2 Channel 1 Current Outer Loop Count */ +#define DMA2_1_IRQ_STATUS 0xFFC00C68 /* DMA2 Channel 1 Interrupt Status Register */ +#define DMA2_1_PERIPHERAL_MAP 0xFFC00C6C /* DMA2 Channel 1 Peripheral Map Register */ + +#define DMA2_2_CONFIG 0xFFC00C88 /* DMA2 Channel 2 Configuration register */ +#define DMA2_2_NEXT_DESC_PTR 0xFFC00C80 /* DMA2 Channel 2 Next Descripter Ptr Reg */ +#define DMA2_2_START_ADDR 0xFFC00C84 /* DMA2 Channel 2 Start Address */ +#define DMA2_2_X_COUNT 0xFFC00C90 /* DMA2 Channel 2 Inner Loop Count */ +#define DMA2_2_Y_COUNT 0xFFC00C98 /* DMA2 Channel 2 Outer Loop Count */ +#define DMA2_2_X_MODIFY 0xFFC00C94 /* DMA2 Channel 2 Inner Loop Addr Increment */ +#define DMA2_2_Y_MODIFY 0xFFC00C9C /* DMA2 Channel 2 Outer Loop Addr Increment */ +#define DMA2_2_CURR_DESC_PTR 0xFFC00CA0 /* DMA2 Channel 2 Current Descriptor Pointer */ +#define DMA2_2_CURR_ADDR 0xFFC00CA4 /* DMA2 Channel 2 Current Address Pointer */ +#define DMA2_2_CURR_X_COUNT 0xFFC00CB0 /* DMA2 Channel 2 Current Inner Loop Count */ +#define DMA2_2_CURR_Y_COUNT 0xFFC00CB8 /* DMA2 Channel 2 Current Outer Loop Count */ +#define DMA2_2_IRQ_STATUS 0xFFC00CA8 /* DMA2 Channel 2 Interrupt Status Register */ +#define DMA2_2_PERIPHERAL_MAP 0xFFC00CAC /* DMA2 Channel 2 Peripheral Map Register */ + +#define DMA2_3_CONFIG 0xFFC00CC8 /* DMA2 Channel 3 Configuration register */ +#define DMA2_3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA2 Channel 3 Next Descripter Ptr Reg */ +#define DMA2_3_START_ADDR 0xFFC00CC4 /* DMA2 Channel 3 Start Address */ +#define DMA2_3_X_COUNT 0xFFC00CD0 /* DMA2 Channel 3 Inner Loop Count */ +#define DMA2_3_Y_COUNT 0xFFC00CD8 /* DMA2 Channel 3 Outer Loop Count */ +#define DMA2_3_X_MODIFY 0xFFC00CD4 /* DMA2 Channel 3 Inner Loop Addr Increment */ +#define DMA2_3_Y_MODIFY 0xFFC00CDC /* DMA2 Channel 3 Outer Loop Addr Increment */ +#define DMA2_3_CURR_DESC_PTR 0xFFC00CE0 /* DMA2 Channel 3 Current Descriptor Pointer */ +#define DMA2_3_CURR_ADDR 0xFFC00CE4 /* DMA2 Channel 3 Current Address Pointer */ +#define DMA2_3_CURR_X_COUNT 0xFFC00CF0 /* DMA2 Channel 3 Current Inner Loop Count */ +#define DMA2_3_CURR_Y_COUNT 0xFFC00CF8 /* DMA2 Channel 3 Current Outer Loop Count */ +#define DMA2_3_IRQ_STATUS 0xFFC00CE8 /* DMA2 Channel 3 Interrupt Status Register */ +#define DMA2_3_PERIPHERAL_MAP 0xFFC00CEC /* DMA2 Channel 3 Peripheral Map Register */ + +#define DMA2_4_CONFIG 0xFFC00D08 /* DMA2 Channel 4 Configuration register */ +#define DMA2_4_NEXT_DESC_PTR 0xFFC00D00 /* DMA2 Channel 4 Next Descripter Ptr Reg */ +#define DMA2_4_START_ADDR 0xFFC00D04 /* DMA2 Channel 4 Start Address */ +#define DMA2_4_X_COUNT 0xFFC00D10 /* DMA2 Channel 4 Inner Loop Count */ +#define DMA2_4_Y_COUNT 0xFFC00D18 /* DMA2 Channel 4 Outer Loop Count */ +#define DMA2_4_X_MODIFY 0xFFC00D14 /* DMA2 Channel 4 Inner Loop Addr Increment */ +#define DMA2_4_Y_MODIFY 0xFFC00D1C /* DMA2 Channel 4 Outer Loop Addr Increment */ +#define DMA2_4_CURR_DESC_PTR 0xFFC00D20 /* DMA2 Channel 4 Current Descriptor Pointer */ +#define DMA2_4_CURR_ADDR 0xFFC00D24 /* DMA2 Channel 4 Current Address Pointer */ +#define DMA2_4_CURR_X_COUNT 0xFFC00D30 /* DMA2 Channel 4 Current Inner Loop Count */ +#define DMA2_4_CURR_Y_COUNT 0xFFC00D38 /* DMA2 Channel 4 Current Outer Loop Count */ +#define DMA2_4_IRQ_STATUS 0xFFC00D28 /* DMA2 Channel 4 Interrupt Status Register */ +#define DMA2_4_PERIPHERAL_MAP 0xFFC00D2C /* DMA2 Channel 4 Peripheral Map Register */ + +#define DMA2_5_CONFIG 0xFFC00D48 /* DMA2 Channel 5 Configuration register */ +#define DMA2_5_NEXT_DESC_PTR 0xFFC00D40 /* DMA2 Channel 5 Next Descripter Ptr Reg */ +#define DMA2_5_START_ADDR 0xFFC00D44 /* DMA2 Channel 5 Start Address */ +#define DMA2_5_X_COUNT 0xFFC00D50 /* DMA2 Channel 5 Inner Loop Count */ +#define DMA2_5_Y_COUNT 0xFFC00D58 /* DMA2 Channel 5 Outer Loop Count */ +#define DMA2_5_X_MODIFY 0xFFC00D54 /* DMA2 Channel 5 Inner Loop Addr Increment */ +#define DMA2_5_Y_MODIFY 0xFFC00D5C /* DMA2 Channel 5 Outer Loop Addr Increment */ +#define DMA2_5_CURR_DESC_PTR 0xFFC00D60 /* DMA2 Channel 5 Current Descriptor Pointer */ +#define DMA2_5_CURR_ADDR 0xFFC00D64 /* DMA2 Channel 5 Current Address Pointer */ +#define DMA2_5_CURR_X_COUNT 0xFFC00D70 /* DMA2 Channel 5 Current Inner Loop Count */ +#define DMA2_5_CURR_Y_COUNT 0xFFC00D78 /* DMA2 Channel 5 Current Outer Loop Count */ +#define DMA2_5_IRQ_STATUS 0xFFC00D68 /* DMA2 Channel 5 Interrupt Status Register */ +#define DMA2_5_PERIPHERAL_MAP 0xFFC00D6C /* DMA2 Channel 5 Peripheral Map Register */ + +#define DMA2_6_CONFIG 0xFFC00D88 /* DMA2 Channel 6 Configuration register */ +#define DMA2_6_NEXT_DESC_PTR 0xFFC00D80 /* DMA2 Channel 6 Next Descripter Ptr Reg */ +#define DMA2_6_START_ADDR 0xFFC00D84 /* DMA2 Channel 6 Start Address */ +#define DMA2_6_X_COUNT 0xFFC00D90 /* DMA2 Channel 6 Inner Loop Count */ +#define DMA2_6_Y_COUNT 0xFFC00D98 /* DMA2 Channel 6 Outer Loop Count */ +#define DMA2_6_X_MODIFY 0xFFC00D94 /* DMA2 Channel 6 Inner Loop Addr Increment */ +#define DMA2_6_Y_MODIFY 0xFFC00D9C /* DMA2 Channel 6 Outer Loop Addr Increment */ +#define DMA2_6_CURR_DESC_PTR 0xFFC00DA0 /* DMA2 Channel 6 Current Descriptor Pointer */ +#define DMA2_6_CURR_ADDR 0xFFC00DA4 /* DMA2 Channel 6 Current Address Pointer */ +#define DMA2_6_CURR_X_COUNT 0xFFC00DB0 /* DMA2 Channel 6 Current Inner Loop Count */ +#define DMA2_6_CURR_Y_COUNT 0xFFC00DB8 /* DMA2 Channel 6 Current Outer Loop Count */ +#define DMA2_6_IRQ_STATUS 0xFFC00DA8 /* DMA2 Channel 6 Interrupt Status Register */ +#define DMA2_6_PERIPHERAL_MAP 0xFFC00DAC /* DMA2 Channel 6 Peripheral Map Register */ + +#define DMA2_7_CONFIG 0xFFC00DC8 /* DMA2 Channel 7 Configuration register */ +#define DMA2_7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA2 Channel 7 Next Descripter Ptr Reg */ +#define DMA2_7_START_ADDR 0xFFC00DC4 /* DMA2 Channel 7 Start Address */ +#define DMA2_7_X_COUNT 0xFFC00DD0 /* DMA2 Channel 7 Inner Loop Count */ +#define DMA2_7_Y_COUNT 0xFFC00DD8 /* DMA2 Channel 7 Outer Loop Count */ +#define DMA2_7_X_MODIFY 0xFFC00DD4 /* DMA2 Channel 7 Inner Loop Addr Increment */ +#define DMA2_7_Y_MODIFY 0xFFC00DDC /* DMA2 Channel 7 Outer Loop Addr Increment */ +#define DMA2_7_CURR_DESC_PTR 0xFFC00DE0 /* DMA2 Channel 7 Current Descriptor Pointer */ +#define DMA2_7_CURR_ADDR 0xFFC00DE4 /* DMA2 Channel 7 Current Address Pointer */ +#define DMA2_7_CURR_X_COUNT 0xFFC00DF0 /* DMA2 Channel 7 Current Inner Loop Count */ +#define DMA2_7_CURR_Y_COUNT 0xFFC00DF8 /* DMA2 Channel 7 Current Outer Loop Count */ +#define DMA2_7_IRQ_STATUS 0xFFC00DE8 /* DMA2 Channel 7 Interrupt Status Register */ +#define DMA2_7_PERIPHERAL_MAP 0xFFC00DEC /* DMA2 Channel 7 Peripheral Map Register */ + +#define DMA2_8_CONFIG 0xFFC00E08 /* DMA2 Channel 8 Configuration register */ +#define DMA2_8_NEXT_DESC_PTR 0xFFC00E00 /* DMA2 Channel 8 Next Descripter Ptr Reg */ +#define DMA2_8_START_ADDR 0xFFC00E04 /* DMA2 Channel 8 Start Address */ +#define DMA2_8_X_COUNT 0xFFC00E10 /* DMA2 Channel 8 Inner Loop Count */ +#define DMA2_8_Y_COUNT 0xFFC00E18 /* DMA2 Channel 8 Outer Loop Count */ +#define DMA2_8_X_MODIFY 0xFFC00E14 /* DMA2 Channel 8 Inner Loop Addr Increment */ +#define DMA2_8_Y_MODIFY 0xFFC00E1C /* DMA2 Channel 8 Outer Loop Addr Increment */ +#define DMA2_8_CURR_DESC_PTR 0xFFC00E20 /* DMA2 Channel 8 Current Descriptor Pointer */ +#define DMA2_8_CURR_ADDR 0xFFC00E24 /* DMA2 Channel 8 Current Address Pointer */ +#define DMA2_8_CURR_X_COUNT 0xFFC00E30 /* DMA2 Channel 8 Current Inner Loop Count */ +#define DMA2_8_CURR_Y_COUNT 0xFFC00E38 /* DMA2 Channel 8 Current Outer Loop Count */ +#define DMA2_8_IRQ_STATUS 0xFFC00E28 /* DMA2 Channel 8 Interrupt Status Register */ +#define DMA2_8_PERIPHERAL_MAP 0xFFC00E2C /* DMA2 Channel 8 Peripheral Map Register */ + +#define DMA2_9_CONFIG 0xFFC00E48 /* DMA2 Channel 9 Configuration register */ +#define DMA2_9_NEXT_DESC_PTR 0xFFC00E40 /* DMA2 Channel 9 Next Descripter Ptr Reg */ +#define DMA2_9_START_ADDR 0xFFC00E44 /* DMA2 Channel 9 Start Address */ +#define DMA2_9_X_COUNT 0xFFC00E50 /* DMA2 Channel 9 Inner Loop Count */ +#define DMA2_9_Y_COUNT 0xFFC00E58 /* DMA2 Channel 9 Outer Loop Count */ +#define DMA2_9_X_MODIFY 0xFFC00E54 /* DMA2 Channel 9 Inner Loop Addr Increment */ +#define DMA2_9_Y_MODIFY 0xFFC00E5C /* DMA2 Channel 9 Outer Loop Addr Increment */ +#define DMA2_9_CURR_DESC_PTR 0xFFC00E60 /* DMA2 Channel 9 Current Descriptor Pointer */ +#define DMA2_9_CURR_ADDR 0xFFC00E64 /* DMA2 Channel 9 Current Address Pointer */ +#define DMA2_9_CURR_X_COUNT 0xFFC00E70 /* DMA2 Channel 9 Current Inner Loop Count */ +#define DMA2_9_CURR_Y_COUNT 0xFFC00E78 /* DMA2 Channel 9 Current Outer Loop Count */ +#define DMA2_9_IRQ_STATUS 0xFFC00E68 /* DMA2 Channel 9 Interrupt Status Register */ +#define DMA2_9_PERIPHERAL_MAP 0xFFC00E6C /* DMA2 Channel 9 Peripheral Map Register */ + +#define DMA2_10_CONFIG 0xFFC00E88 /* DMA2 Channel 10 Configuration register */ +#define DMA2_10_NEXT_DESC_PTR 0xFFC00E80 /* DMA2 Channel 10 Next Descripter Ptr Reg */ +#define DMA2_10_START_ADDR 0xFFC00E84 /* DMA2 Channel 10 Start Address */ +#define DMA2_10_X_COUNT 0xFFC00E90 /* DMA2 Channel 10 Inner Loop Count */ +#define DMA2_10_Y_COUNT 0xFFC00E98 /* DMA2 Channel 10 Outer Loop Count */ +#define DMA2_10_X_MODIFY 0xFFC00E94 /* DMA2 Channel 10 Inner Loop Addr Increment */ +#define DMA2_10_Y_MODIFY 0xFFC00E9C /* DMA2 Channel 10 Outer Loop Addr Increment */ +#define DMA2_10_CURR_DESC_PTR 0xFFC00EA0 /* DMA2 Channel 10 Current Descriptor Pointer */ +#define DMA2_10_CURR_ADDR 0xFFC00EA4 /* DMA2 Channel 10 Current Address Pointer */ +#define DMA2_10_CURR_X_COUNT 0xFFC00EB0 /* DMA2 Channel 10 Current Inner Loop Count */ +#define DMA2_10_CURR_Y_COUNT 0xFFC00EB8 /* DMA2 Channel 10 Current Outer Loop Count */ +#define DMA2_10_IRQ_STATUS 0xFFC00EA8 /* DMA2 Channel 10 Interrupt Status Register */ +#define DMA2_10_PERIPHERAL_MAP 0xFFC00EAC /* DMA2 Channel 10 Peripheral Map Register */ + +#define DMA2_11_CONFIG 0xFFC00EC8 /* DMA2 Channel 11 Configuration register */ +#define DMA2_11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA2 Channel 11 Next Descripter Ptr Reg */ +#define DMA2_11_START_ADDR 0xFFC00EC4 /* DMA2 Channel 11 Start Address */ +#define DMA2_11_X_COUNT 0xFFC00ED0 /* DMA2 Channel 11 Inner Loop Count */ +#define DMA2_11_Y_COUNT 0xFFC00ED8 /* DMA2 Channel 11 Outer Loop Count */ +#define DMA2_11_X_MODIFY 0xFFC00ED4 /* DMA2 Channel 11 Inner Loop Addr Increment */ +#define DMA2_11_Y_MODIFY 0xFFC00EDC /* DMA2 Channel 11 Outer Loop Addr Increment */ +#define DMA2_11_CURR_DESC_PTR 0xFFC00EE0 /* DMA2 Channel 11 Current Descriptor Pointer */ +#define DMA2_11_CURR_ADDR 0xFFC00EE4 /* DMA2 Channel 11 Current Address Pointer */ +#define DMA2_11_CURR_X_COUNT 0xFFC00EF0 /* DMA2 Channel 11 Current Inner Loop Count */ +#define DMA2_11_CURR_Y_COUNT 0xFFC00EF8 /* DMA2 Channel 11 Current Outer Loop Count */ +#define DMA2_11_IRQ_STATUS 0xFFC00EE8 /* DMA2 Channel 11 Interrupt Status Register */ +#define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC /* DMA2 Channel 11 Peripheral Map Register */ + +/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */ +#define MDMA2_D0_CONFIG 0xFFC00F08 /* MemDMA2 Stream 0 Destination Configuration register */ +#define MDMA2_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA2_D0_START_ADDR 0xFFC00F04 /* MemDMA2 Stream 0 Destination Start Address */ +#define MDMA2_D0_X_COUNT 0xFFC00F10 /* MemDMA2 Stream 0 Dest Inner-Loop Count register */ +#define MDMA2_D0_Y_COUNT 0xFFC00F18 /* MemDMA2 Stream 0 Dest Outer-Loop Count register */ +#define MDMA2_D0_X_MODIFY 0xFFC00F14 /* MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA2_D0_Y_MODIFY 0xFFC00F1C /* MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA2_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA2_D0_CURR_ADDR 0xFFC00F24 /* MemDMA2 Stream 0 Destination Current Address */ +#define MDMA2_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */ +#define MDMA2_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */ +#define MDMA2_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA2 Stream 0 Dest Interrupt/Status Register */ +#define MDMA2_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA2 Stream 0 Destination Peripheral Map register */ + +#define MDMA2_S0_CONFIG 0xFFC00F48 /* MemDMA2 Stream 0 Source Configuration register */ +#define MDMA2_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA2_S0_START_ADDR 0xFFC00F44 /* MemDMA2 Stream 0 Source Start Address */ +#define MDMA2_S0_X_COUNT 0xFFC00F50 /* MemDMA2 Stream 0 Source Inner-Loop Count register */ +#define MDMA2_S0_Y_COUNT 0xFFC00F58 /* MemDMA2 Stream 0 Source Outer-Loop Count register */ +#define MDMA2_S0_X_MODIFY 0xFFC00F54 /* MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */ +#define MDMA2_S0_Y_MODIFY 0xFFC00F5C /* MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */ +#define MDMA2_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA2 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA2_S0_CURR_ADDR 0xFFC00F64 /* MemDMA2 Stream 0 Source Current Address */ +#define MDMA2_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA2 Stream 0 Src Current Inner-Loop Count reg */ +#define MDMA2_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA2 Stream 0 Src Current Outer-Loop Count reg */ +#define MDMA2_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA2 Stream 0 Source Interrupt/Status Register */ +#define MDMA2_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA2 Stream 0 Source Peripheral Map register */ + +#define MDMA2_D1_CONFIG 0xFFC00F88 /* MemDMA2 Stream 1 Destination Configuration register */ +#define MDMA2_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA2_D1_START_ADDR 0xFFC00F84 /* MemDMA2 Stream 1 Destination Start Address */ +#define MDMA2_D1_X_COUNT 0xFFC00F90 /* MemDMA2 Stream 1 Dest Inner-Loop Count register */ +#define MDMA2_D1_Y_COUNT 0xFFC00F98 /* MemDMA2 Stream 1 Dest Outer-Loop Count register */ +#define MDMA2_D1_X_MODIFY 0xFFC00F94 /* MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA2_D1_Y_MODIFY 0xFFC00F9C /* MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA2_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA2 Stream 1 Destination Current Descriptor Ptr */ +#define MDMA2_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA2 Stream 1 Destination Current Address reg */ +#define MDMA2_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */ +#define MDMA2_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */ +#define MDMA2_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA2 Stream 1 Destination Interrupt/Status Reg */ +#define MDMA2_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA2 Stream 1 Destination Peripheral Map register */ + +#define MDMA2_S1_CONFIG 0xFFC00FC8 /* MemDMA2 Stream 1 Source Configuration register */ +#define MDMA2_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA2_S1_START_ADDR 0xFFC00FC4 /* MemDMA2 Stream 1 Source Start Address */ +#define MDMA2_S1_X_COUNT 0xFFC00FD0 /* MemDMA2 Stream 1 Source Inner-Loop Count register */ +#define MDMA2_S1_Y_COUNT 0xFFC00FD8 /* MemDMA2 Stream 1 Source Outer-Loop Count register */ +#define MDMA2_S1_X_MODIFY 0xFFC00FD4 /* MemDMA2 Stream 1 Src Inner-Loop Address-Increment */ +#define MDMA2_S1_Y_MODIFY 0xFFC00FDC /* MemDMA2 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA2_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA2 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA2_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA2 Stream 1 Source Current Address */ +#define MDMA2_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA2 Stream 1 Source Current Inner-Loop Count */ +#define MDMA2_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA2 Stream 1 Source Current Outer-Loop Count */ +#define MDMA2_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA2 Stream 1 Source Interrupt/Status Register */ +#define MDMA2_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA2 Stream 1 Source Peripheral Map register */ + +/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */ +#define IMDMA_D0_CONFIG 0xFFC01808 /* IMDMA Stream 0 Destination Configuration */ +#define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800 /* IMDMA Stream 0 Destination Next Descriptor Ptr Reg */ +#define IMDMA_D0_START_ADDR 0xFFC01804 /* IMDMA Stream 0 Destination Start Address */ +#define IMDMA_D0_X_COUNT 0xFFC01810 /* IMDMA Stream 0 Destination Inner-Loop Count */ +#define IMDMA_D0_Y_COUNT 0xFFC01818 /* IMDMA Stream 0 Destination Outer-Loop Count */ +#define IMDMA_D0_X_MODIFY 0xFFC01814 /* IMDMA Stream 0 Dest Inner-Loop Address-Increment */ +#define IMDMA_D0_Y_MODIFY 0xFFC0181C /* IMDMA Stream 0 Dest Outer-Loop Address-Increment */ +#define IMDMA_D0_CURR_DESC_PTR 0xFFC01820 /* IMDMA Stream 0 Destination Current Descriptor Ptr */ +#define IMDMA_D0_CURR_ADDR 0xFFC01824 /* IMDMA Stream 0 Destination Current Address */ +#define IMDMA_D0_CURR_X_COUNT 0xFFC01830 /* IMDMA Stream 0 Destination Current Inner-Loop Count */ +#define IMDMA_D0_CURR_Y_COUNT 0xFFC01838 /* IMDMA Stream 0 Destination Current Outer-Loop Count */ +#define IMDMA_D0_IRQ_STATUS 0xFFC01828 /* IMDMA Stream 0 Destination Interrupt/Status */ + +#define IMDMA_S0_CONFIG 0xFFC01848 /* IMDMA Stream 0 Source Configuration */ +#define IMDMA_S0_NEXT_DESC_PTR 0xFFC01840 /* IMDMA Stream 0 Source Next Descriptor Ptr Reg */ +#define IMDMA_S0_START_ADDR 0xFFC01844 /* IMDMA Stream 0 Source Start Address */ +#define IMDMA_S0_X_COUNT 0xFFC01850 /* IMDMA Stream 0 Source Inner-Loop Count */ +#define IMDMA_S0_Y_COUNT 0xFFC01858 /* IMDMA Stream 0 Source Outer-Loop Count */ +#define IMDMA_S0_X_MODIFY 0xFFC01854 /* IMDMA Stream 0 Source Inner-Loop Address-Increment */ +#define IMDMA_S0_Y_MODIFY 0xFFC0185C /* IMDMA Stream 0 Source Outer-Loop Address-Increment */ +#define IMDMA_S0_CURR_DESC_PTR 0xFFC01860 /* IMDMA Stream 0 Source Current Descriptor Ptr reg */ +#define IMDMA_S0_CURR_ADDR 0xFFC01864 /* IMDMA Stream 0 Source Current Address */ +#define IMDMA_S0_CURR_X_COUNT 0xFFC01870 /* IMDMA Stream 0 Source Current Inner-Loop Count */ +#define IMDMA_S0_CURR_Y_COUNT 0xFFC01878 /* IMDMA Stream 0 Source Current Outer-Loop Count */ +#define IMDMA_S0_IRQ_STATUS 0xFFC01868 /* IMDMA Stream 0 Source Interrupt/Status */ + +#define IMDMA_D1_CONFIG 0xFFC01888 /* IMDMA Stream 1 Destination Configuration */ +#define IMDMA_D1_NEXT_DESC_PTR 0xFFC01880 /* IMDMA Stream 1 Destination Next Descriptor Ptr Reg */ +#define IMDMA_D1_START_ADDR 0xFFC01884 /* IMDMA Stream 1 Destination Start Address */ +#define IMDMA_D1_X_COUNT 0xFFC01890 /* IMDMA Stream 1 Destination Inner-Loop Count */ +#define IMDMA_D1_Y_COUNT 0xFFC01898 /* IMDMA Stream 1 Destination Outer-Loop Count */ +#define IMDMA_D1_X_MODIFY 0xFFC01894 /* IMDMA Stream 1 Dest Inner-Loop Address-Increment */ +#define IMDMA_D1_Y_MODIFY 0xFFC0189C /* IMDMA Stream 1 Dest Outer-Loop Address-Increment */ +#define IMDMA_D1_CURR_DESC_PTR 0xFFC018A0 /* IMDMA Stream 1 Destination Current Descriptor Ptr */ +#define IMDMA_D1_CURR_ADDR 0xFFC018A4 /* IMDMA Stream 1 Destination Current Address */ +#define IMDMA_D1_CURR_X_COUNT 0xFFC018B0 /* IMDMA Stream 1 Destination Current Inner-Loop Count */ +#define IMDMA_D1_CURR_Y_COUNT 0xFFC018B8 /* IMDMA Stream 1 Destination Current Outer-Loop Count */ +#define IMDMA_D1_IRQ_STATUS 0xFFC018A8 /* IMDMA Stream 1 Destination Interrupt/Status */ + +#define IMDMA_S1_CONFIG 0xFFC018C8 /* IMDMA Stream 1 Source Configuration */ +#define IMDMA_S1_NEXT_DESC_PTR 0xFFC018C0 /* IMDMA Stream 1 Source Next Descriptor Ptr Reg */ +#define IMDMA_S1_START_ADDR 0xFFC018C4 /* IMDMA Stream 1 Source Start Address */ +#define IMDMA_S1_X_COUNT 0xFFC018D0 /* IMDMA Stream 1 Source Inner-Loop Count */ +#define IMDMA_S1_Y_COUNT 0xFFC018D8 /* IMDMA Stream 1 Source Outer-Loop Count */ +#define IMDMA_S1_X_MODIFY 0xFFC018D4 /* IMDMA Stream 1 Source Inner-Loop Address-Increment */ +#define IMDMA_S1_Y_MODIFY 0xFFC018DC /* IMDMA Stream 1 Source Outer-Loop Address-Increment */ +#define IMDMA_S1_CURR_DESC_PTR 0xFFC018E0 /* IMDMA Stream 1 Source Current Descriptor Ptr reg */ +#define IMDMA_S1_CURR_ADDR 0xFFC018E4 /* IMDMA Stream 1 Source Current Address */ +#define IMDMA_S1_CURR_X_COUNT 0xFFC018F0 /* IMDMA Stream 1 Source Current Inner-Loop Count */ +#define IMDMA_S1_CURR_Y_COUNT 0xFFC018F8 /* IMDMA Stream 1 Source Current Outer-Loop Count */ +#define IMDMA_S1_IRQ_STATUS 0xFFC018E8 /* IMDMA Stream 1 Source Interrupt/Status */ + +/* + * System MMR Register Bits + */ + +/* PLL AND RESET MASKS */ + +/* PLL_CTL Masks */ +#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */ +#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */ +#define PLL_OFF 0x00000002 /* Shut off PLL clocks */ +#define STOPCK_OFF 0x00000008 /* Core clock off */ +#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */ +#define BYPASS 0x00000100 /* Bypass the PLL */ + +/* PLL_DIV Masks */ + +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ + +#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ + +/* SWRST Mask */ +#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */ +#define SWRST_DBL_FAULT_B 0x00000800 /* SWRST Core B Double Fault */ +#define SWRST_DBL_FAULT_A 0x00001000 /* SWRST Core A Double Fault */ +#define SWRST_WDT_B 0x00002000 /* SWRST Watchdog B */ +#define SWRST_WDT_A 0x00004000 /* SWRST Watchdog A */ +#define SWRST_OCCURRED 0x00008000 /* SWRST Status */ + +/* + * SYSTEM INTERRUPT CONTROLLER MASKS + * SICu_IARv Masks + * u = A or B + * v = 0 to 7 + * w = 0 or 1 + + * Per_number = 0 to 63 + * IVG_number = 7 to 15 + * Peripheral #Per_number assigned IVG #IVG_number + * Usage: + * r0.l = lo(Peripheral_IVG(62, 10)); + * r0.h = hi(Peripheral_IVG(62, 10)); + */ +#define Peripheral_IVG(Per_number, IVG_number) \ + ( (IVG_number) -7) << ( ((Per_number)%8) *4) + +/* SICx_IMASKw Masks */ +/* masks are 32 bit wide, so two writes reguired for "64 bit" wide registers */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))/* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +/* x = pos 0 to 31, for 32-63 use value-32 */ +#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ +/* Wakeup Disable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) + +/* + * WATCHDOG TIMER MASKS + */ + +/* Watchdog Timer WDOG_CTL Register */ +#define WDOGA_CTL 0xFFC00200 +#define WDOGA_CNT 0xFFC00204 +#define WDOGA_STAT 0xFFC00208 +#define WDOGB_CTL 0xFFC01200 +#define WDOGB_CNT 0xFFC01204 +#define WDOGB_STAT 0xFFC01208 +#define ICTL(x) ((x<<1) & 0x0006) +#define ENABLE_RESET 0x00000000 /* Set Watchdog Timer to generate reset */ +#define ENABLE_NMI 0x00000002 /* Set Watchdog Timer to generate non-maskable interrupt */ +#define ENABLE_GPI 0x00000004 /* Set Watchdog Timer to generate general-purpose interrupt */ +#define DISABLE_EVT 0x00000006 /* Disable Watchdog Timer interrupts */ + +#define TMR_EN 0x0000 +#define TMR_DIS 0x0AD0 +#define TRO 0x8000 + +#define ICTL_P0 0x01 +#define ICTL_P1 0x02 +#define TRO_P 0x0F + +/* + * UART CONTROLLER MASKS + */ + +/* UART_LCR Register */ + +#define DLAB 0x80 +#define SB 0x40 +#define STP 0x20 +#define EPS 0x10 +#define PEN 0x08 +#define STB 0x04 +#define WLS(x) ((x-5) & 0x03) + +#define DLAB_P 0x07 +#define SB_P 0x06 +#define STP_P 0x05 +#define EPS_P 0x04 +#define PEN_P 0x03 +#define STB_P 0x02 +#define WLS_P1 0x01 +#define WLS_P0 0x00 + +/* UART_MCR Register */ +#define LOOP_ENA 0x10 +#define LOOP_ENA_P 0x04 + +/* UART_LSR Register */ +#define TEMT 0x40 +#define THRE 0x20 +#define BI 0x10 +#define FE 0x08 +#define PE 0x04 +#define OE 0x02 +#define DR 0x01 + +#define TEMP_P 0x06 +#define THRE_P 0x05 +#define BI_P 0x04 +#define FE_P 0x03 +#define PE_P 0x02 +#define OE_P 0x01 +#define DR_P 0x00 + +/* UART_IER Register */ +#define ELSI 0x04 +#define ETBEI 0x02 +#define ERBFI 0x01 + +#define ELSI_P 0x02 +#define ETBEI_P 0x01 +#define ERBFI_P 0x00 + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define NINT 0x01 +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 +#define NINT_P 0x00 + +/* UART_GCTL Register */ +#define FFE 0x20 +#define FPE 0x10 +#define RPOLC 0x08 +#define TPOLC 0x04 +#define IREN 0x02 +#define UCEN 0x01 + +#define FFE_P 0x05 +#define FPE_P 0x04 +#define RPOLC_P 0x03 +#define TPOLC_P 0x02 +#define IREN_P 0x01 +#define UCEN_P 0x00 + +/* + * SERIAL PORT MASKS + */ + +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks */ +#define SLEN 0x001F /* TX Word Length */ +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* TX Right-First Data Order */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +#define RULAW 0x0008 /* u-Law enable */ +#define RALAW 0x000C /* A-Law enable */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN 0x001F /* RX Word Length */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORTx_STAT Masks */ +#define RXNE 0x0001 /* RX FIFO Not Empty Status */ +#define RUVF 0x0002 /* RX Underflow Status */ +#define ROVF 0x0004 /* RX Overflow Status */ +#define TXF 0x0008 /* TX FIFO Full Status */ +#define TUVF 0x0010 /* TX Underflow Status */ +#define TOVF 0x0020 /* TX Overflow Status */ +#define TXHRE 0x0040 /* TX Hold Register Empty */ + +/* SPORTx_MCMC1 Masks */ +#define WSIZE 0x0000F000 /* Multichannel Window Size Field */ +#define WOFF 0x000003FF /* Multichannel Window Offset Field */ + +/* SPORTx_MCMC2 Masks */ +#define MCCRM 0x00000003 /* Multichannel Clock Recovery Mode */ +#define MCDTXPE 0x00000004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x00000008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x00000010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x00000080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD 0x0000F000 /* Multichannel Frame Delay */ + +/* + * PARALLEL PERIPHERAL INTERFACE (PPI) MASKS + */ + +/* PPI_CONTROL Masks */ +#define PORT_EN 0x00000001 /* PPI Port Enable */ +#define PORT_DIR 0x00000002 /* PPI Port Direction */ +#define XFR_TYPE 0x0000000C /* PPI Transfer Type */ +#define PORT_CFG 0x00000030 /* PPI Port Configuration */ +#define FLD_SEL 0x00000040 /* PPI Active Field Select */ +#define PACK_EN 0x00000080 /* PPI Packing Mode */ +#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ +#define DLENGTH 0x00003800 /* PPI Data Length */ +#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ +#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ +#define POL 0x0000C000 /* PPI Signal Polarities */ + +/* PPI_STATUS Masks */ +#define FLD 0x00000400 /* Field Indicator */ +#define FT_ERR 0x00000800 /* Frame Track Error */ +#define OVR 0x00001000 /* FIFO Overflow Error */ +#define UNDR 0x00002000 /* FIFO Underrun Error */ +#define ERR_DET 0x00004000 /* Error Detected Indicator */ +#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */ + +/* + * DMA CONTROLLER MASKS + */ + +/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */ +#define DMAEN 0x00000001 /* Channel Enable */ +#define WNR 0x00000002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ +#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ +#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ +#define DMA2D 0x00000010 /* 2D/1D* Mode */ +#define RESTART 0x00000020 /* Restart */ +#define DI_SEL 0x00000040 /* Data Interrupt Select */ +#define DI_EN 0x00000080 /* Data Interrupt Enable */ +#define NDSIZE 0x00000900 /* Next Descriptor Size */ +#define FLOW 0x00007000 /* Flow Control */ + +#define DMAEN_P 0 /* Channel Enable */ +#define WNR_P 1 /* Channel Direction (W/R*) */ +#define DMA2D_P 4 /* 2D/1D* Mode */ +#define RESTART_P 5 /* Restart */ +#define DI_SEL_P 6 /* Data Interrupt Select */ +#define DI_EN_P 7 /* Data Interrupt Enable */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */ + +#define DMA_DONE 0x00000001 /* DMA Done Indicator */ +#define DMA_ERR 0x00000002 /* DMA Error Indicator */ +#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ +#define DMA_RUN 0x00000008 /* DMA Running Indicator */ + +#define DMA_DONE_P 0 /* DMA Done Indicator */ +#define DMA_ERR_P 1 /* DMA Error Indicator */ +#define DFETCH_P 2 /* Descriptor Fetch Indicator */ +#define DMA_RUN_P 3 /* DMA Running Indicator */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */ + +#define CTYPE 0x00000040 /* DMA Channel Type Indicator */ +#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ +#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ +#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ +#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */ +#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ +#define PMAP 0x00007000 /* DMA Peripheral Map Field */ + +/* + * GENERAL PURPOSE TIMER MASKS + */ + +/* PWM Timer bit definitions */ + +/* TIMER_ENABLE Register */ +#define TIMEN0 0x0001 +#define TIMEN1 0x0002 +#define TIMEN2 0x0004 +#define TIMEN3 0x0008 +#define TIMEN4 0x0010 +#define TIMEN5 0x0020 +#define TIMEN6 0x0040 +#define TIMEN7 0x0080 +#define TIMEN8 0x0001 +#define TIMEN9 0x0002 +#define TIMEN10 0x0004 +#define TIMEN11 0x0008 + +#define TIMEN0_P 0x00 +#define TIMEN1_P 0x01 +#define TIMEN2_P 0x02 +#define TIMEN3_P 0x03 +#define TIMEN4_P 0x04 +#define TIMEN5_P 0x05 +#define TIMEN6_P 0x06 +#define TIMEN7_P 0x07 +#define TIMEN8_P 0x00 +#define TIMEN9_P 0x01 +#define TIMEN10_P 0x02 +#define TIMEN11_P 0x03 + +/* TIMER_DISABLE Register */ +#define TIMDIS0 0x0001 +#define TIMDIS1 0x0002 +#define TIMDIS2 0x0004 +#define TIMDIS3 0x0008 +#define TIMDIS4 0x0010 +#define TIMDIS5 0x0020 +#define TIMDIS6 0x0040 +#define TIMDIS7 0x0080 +#define TIMDIS8 0x0001 +#define TIMDIS9 0x0002 +#define TIMDIS10 0x0004 +#define TIMDIS11 0x0008 + +#define TIMDIS0_P 0x00 +#define TIMDIS1_P 0x01 +#define TIMDIS2_P 0x02 +#define TIMDIS3_P 0x03 +#define TIMDIS4_P 0x04 +#define TIMDIS5_P 0x05 +#define TIMDIS6_P 0x06 +#define TIMDIS7_P 0x07 +#define TIMDIS8_P 0x00 +#define TIMDIS9_P 0x01 +#define TIMDIS10_P 0x02 +#define TIMDIS11_P 0x03 + +/* TIMER_STATUS Register */ +#define TIMIL0 0x00000001 +#define TIMIL1 0x00000002 +#define TIMIL2 0x00000004 +#define TIMIL3 0x00000008 +#define TIMIL4 0x00010000 +#define TIMIL5 0x00020000 +#define TIMIL6 0x00040000 +#define TIMIL7 0x00080000 +#define TIMIL8 0x0001 +#define TIMIL9 0x0002 +#define TIMIL10 0x0004 +#define TIMIL11 0x0008 +#define TOVL_ERR0 0x00000010 +#define TOVL_ERR1 0x00000020 +#define TOVL_ERR2 0x00000040 +#define TOVL_ERR3 0x00000080 +#define TOVL_ERR4 0x00100000 +#define TOVL_ERR5 0x00200000 +#define TOVL_ERR6 0x00400000 +#define TOVL_ERR7 0x00800000 +#define TOVL_ERR8 0x0010 +#define TOVL_ERR9 0x0020 +#define TOVL_ERR10 0x0040 +#define TOVL_ERR11 0x0080 +#define TRUN0 0x00001000 +#define TRUN1 0x00002000 +#define TRUN2 0x00004000 +#define TRUN3 0x00008000 +#define TRUN4 0x10000000 +#define TRUN5 0x20000000 +#define TRUN6 0x40000000 +#define TRUN7 0x80000000 +#define TRUN8 0x1000 +#define TRUN9 0x2000 +#define TRUN10 0x4000 +#define TRUN11 0x8000 + +#define TIMIL0_P 0x00 +#define TIMIL1_P 0x01 +#define TIMIL2_P 0x02 +#define TIMIL3_P 0x03 +#define TIMIL4_P 0x10 +#define TIMIL5_P 0x11 +#define TIMIL6_P 0x12 +#define TIMIL7_P 0x13 +#define TIMIL8_P 0x00 +#define TIMIL9_P 0x01 +#define TIMIL10_P 0x02 +#define TIMIL11_P 0x03 +#define TOVL_ERR0_P 0x04 +#define TOVL_ERR1_P 0x05 +#define TOVL_ERR2_P 0x06 +#define TOVL_ERR3_P 0x07 +#define TOVL_ERR4_P 0x14 +#define TOVL_ERR5_P 0x15 +#define TOVL_ERR6_P 0x16 +#define TOVL_ERR7_P 0x17 +#define TOVL_ERR8_P 0x04 +#define TOVL_ERR9_P 0x05 +#define TOVL_ERR10_P 0x06 +#define TOVL_ERR11_P 0x07 +#define TRUN0_P 0x0C +#define TRUN1_P 0x0D +#define TRUN2_P 0x0E +#define TRUN3_P 0x0F +#define TRUN4_P 0x1C +#define TRUN5_P 0x1D +#define TRUN6_P 0x1E +#define TRUN7_P 0x1F +#define TRUN8_P 0x0C +#define TRUN9_P 0x0D +#define TRUN10_P 0x0E +#define TRUN11_P 0x0F + +/* TIMERx_CONFIG Registers */ +#define PWM_OUT 0x0001 +#define WDTH_CAP 0x0002 +#define EXT_CLK 0x0003 +#define PULSE_HI 0x0004 +#define PERIOD_CNT 0x0008 +#define IRQ_ENA 0x0010 +#define TIN_SEL 0x0020 +#define OUT_DIS 0x0040 +#define CLK_SEL 0x0080 +#define TOGGLE_HI 0x0100 +#define EMU_RUN 0x0200 +#define ERR_TYP(x) ((x & 0x03) << 14) + +#define TMODE_P0 0x00 +#define TMODE_P1 0x01 +#define PULSE_HI_P 0x02 +#define PERIOD_CNT_P 0x03 +#define IRQ_ENA_P 0x04 +#define TIN_SEL_P 0x05 +#define OUT_DIS_P 0x06 +#define CLK_SEL_P 0x07 +#define TOGGLE_HI_P 0x08 +#define EMU_RUN_P 0x09 +#define ERR_TYP_P0 0x0E +#define ERR_TYP_P1 0x0F + +/* + * PROGRAMMABLE FLAG MASKS + */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ +#define PF0_P 0 +#define PF1_P 1 +#define PF2_P 2 +#define PF3_P 3 +#define PF4_P 4 +#define PF5_P 5 +#define PF6_P 6 +#define PF7_P 7 +#define PF8_P 8 +#define PF9_P 9 +#define PF10_P 10 +#define PF11_P 11 +#define PF12_P 12 +#define PF13_P 13 +#define PF14_P 14 +#define PF15_P 15 + +/* + * SERIAL PERIPHERAL INTERFACE (SPI) MASKS + */ + +/* SPI_CTL Masks */ +#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ +#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ +#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ +#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ +#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ +#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ +#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ + +/* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer.*/ +#define CPHA 0x00000400 +#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ +#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ +#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ +#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ + +/* SPI_FLG Masks */ +#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_FLG Bit Positions */ +#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_STAT Masks */ +#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ +#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */ +#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ +#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ +#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ +#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ +#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ + +/* + * ASYNCHRONOUS MEMORY CONTROLLER MASKS + */ + +/* AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_B0 0x0002 /* Enable Asynchronous Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Asynchronous Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Asynchronous Memory Banks 0,/ 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ +#define B0_PEN 0x0010 /* Enable 16-bit packing Bank 0 */ +#define B1_PEN 0x0020 /* Enable 16-bit packing Bank 1 */ +#define B2_PEN 0x0040 /* Enable 16-bit packing Bank 2 */ +#define B3_PEN 0x0080 /* Enable 16-bit packing Bank 3 */ + +/* AMGCTL Bit Positions */ +#define AMCKEN_P 0x00000000 /* Enable CLKOUT */ +#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ +#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ +#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ +#define B0_PEN_P 0x004 /* Enable 16-bit packing Bank 0 */ +#define B1_PEN_P 0x005 /* Enable 16-bit packing Bank 1 */ +#define B2_PEN_P 0x006 /* Enable 16-bit packing Bank 2 */ +#define B3_PEN_P 0x007 /* Enable 16-bit packing Bank 3 */ + +/* AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ +#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ +#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ +#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ +#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ +#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ +#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ +#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ +#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ +#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ +#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ +#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ +#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ +#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ +#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ +#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ +#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ +#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ +#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ +#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ +#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ +#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ + +/* AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ +#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ +#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ +#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ +#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ +#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ +#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ +#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ +#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ +#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ +#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ +#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ +#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ +#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ + +/* + * SDRAM CONTROLLER MASKS + */ + +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ +#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ +#define PFE 0x00000010 /* Enable SDRAM prefetch */ +#define PFP 0x00000020 /* Prefetch has priority over AMC requests */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /* Power-up start delay */ +#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ +#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ +#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ +#define EBUFE 0x02000000 /* Enable external buffering timing */ +#define FBBRW 0x04000000 /* Fast back-to-back read write enable */ +#define EMREN 0x10000000 /* Extended mode register enable */ +#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ +#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ + +/* EBIU_SDBCTL Masks */ +#define EB0_E 0x00000001 /* Enable SDRAM external bank 0 */ +#define EB0_SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB0_SZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EB0_SZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EB0_SZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EB0_CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB0_CAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EB0_CAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EB0_CAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +#define EB1_E 0x00000100 /* Enable SDRAM external bank 1 */ +#define EB1__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB1__SZ_32 0x00000200 /* SDRAM external bank size = 32MB */ +#define EB1__SZ_64 0x00000400 /* SDRAM external bank size = 64MB */ +#define EB1__SZ_128 0x00000600 /* SDRAM external bank size = 128MB */ +#define EB1__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB1__CAW_9 0x00001000 /* SDRAM external bank column address width = 9 bits */ +#define EB1__CAW_10 0x00002000 /* SDRAM external bank column address width = 9 bits */ +#define EB1__CAW_11 0x00003000 /* SDRAM external bank column address width = 9 bits */ + +#define EB2__E 0x00010000 /* Enable SDRAM external bank 2 */ +#define EB2__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB2__SZ_32 0x00020000 /* SDRAM external bank size = 32MB */ +#define EB2__SZ_64 0x00040000 /* SDRAM external bank size = 64MB */ +#define EB2__SZ_128 0x00060000 /* SDRAM external bank size = 128MB */ +#define EB2__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB2__CAW_9 0x00100000 /* SDRAM external bank column address width = 9 bits */ +#define EB2__CAW_10 0x00200000 /* SDRAM external bank column address width = 9 bits */ +#define EB2__CAW_11 0x00300000 /* SDRAM external bank column address width = 9 bits */ + +#define EB3__E 0x01000000 /* Enable SDRAM external bank 3 */ +#define EB3__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB3__SZ_32 0x02000000 /* SDRAM external bank size = 32MB */ +#define EB3__SZ_64 0x04000000 /* SDRAM external bank size = 64MB */ +#define EB3__SZ_128 0x06000000 /* SDRAM external bank size = 128MB */ +#define EB3__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB3__CAW_9 0x10000000 /* SDRAM external bank column address width = 9 bits */ +#define EB3__CAW_10 0x20000000 /* SDRAM external bank column address width = 9 bits */ +#define EB3__CAW_11 0x30000000 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x00000001 /* SDRAM controller is idle */ +#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ +#define SDPUA 0x00000004 /* SDRAM power up active */ +#define SDRS 0x00000008 /* SDRAM is in reset state */ +#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ +#define BGSTAT 0x00000020 /* Bus granted */ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status register */ + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define FIO_FLAG_D 0xFFC00700 /* Flag Data register */ +#define FIO_FLAG_C 0xFFC00704 /* Flag Clear register */ +#define FIO_FLAG_S 0xFFC00708 /* Flag Set register */ +#define FIO_FLAG_T 0xFFC0070C /* Flag Toggle register */ +#define FIO_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Data register */ +#define FIO_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Clear register */ +#define FIO_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Set register */ +#define FIO_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Toggle register */ +#define FIO_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Data register */ +#define FIO_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Clear register */ +#define FIO_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Set register */ +#define FIO_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Toggle register */ +#define FIO_DIR 0xFFC00730 /* Flag Direction register */ +#define FIO_POLAR 0xFFC00734 /* Flag Polarity register */ +#define FIO_EDGE 0xFFC00738 /* Flag Interrupt Sensitivity register */ +#define FIO_BOTH 0xFFC0073C /* Flag Set on Both Edges register */ +#define FIO_INEN 0xFFC00740 /* Flag Input Enable register */ + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI0 Control register */ +#define PPI_STATUS 0xFFC01004 /* PPI0 Status register */ +#define PPI_COUNT 0xFFC01008 /* PPI0 Transfer Count register */ +#define PPI_DELAY 0xFFC0100C /* PPI0 Delay Count register */ +#define PPI_FRAME 0xFFC01010 /* PPI0 Frame Length register */ + +/* + * System Reset and Interrupt Controller registers for + * core A (0xFFC0 0100-0xFFC0 01FF) + */ +#define SWRST 0xFFC00100 /* Software Reset register */ +#define SYSCR 0xFFC00104 /* System Reset Configuration register */ +#define RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ +#define SIC_SWRST 0xFFC00100 /* Software Reset register */ +#define SIC_SYSCR 0xFFC00104 /* System Reset Configuration register */ +#define SIC_RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ +#define SIC_IMASK 0xFFC0010C /* SIC Interrupt Mask register 0 - hack to fix old tests */ +#define SIC_IAR 0xFFC00124 /* SIC Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00128 /* SIC Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC0012C /* SIC Interrupt Assignment Register 2 */ +#define SIC_ISR 0xFFC00114 /* SIC Interrupt Status register 0 */ +#define SIC_IWR 0xFFC0011C /* SIC Interrupt Wakeup-Enable register 0 */ + +/* EBIU_SDBCTL Masks */ +#define EB_E 0x00000001 /* Enable SDRAM external bank 0 */ +#define EB_SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB_SZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EB_SZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EB_SZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EB_CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB_CAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EB_CAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EB_CAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x00000001 /* Enable SDRAM external bank 0 */ +#define EBSZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EBSZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EBSZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EBSZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EBCAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EBCAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ +#define MDMA_D0_CONFIG 0xFFC01F08 /* MemDMA1 Stream 0 Destination Configuration */ +#define MDMA_D0_NEXT_DESC_PTR 0xFFC01F00 /* MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA_D0_START_ADDR 0xFFC01F04 /* MemDMA1 Stream 0 Destination Start Address */ +#define MDMA_D0_X_COUNT 0xFFC01F10 /* MemDMA1 Stream 0 Destination Inner-Loop Count */ +#define MDMA_D0_Y_COUNT 0xFFC01F18 /* MemDMA1 Stream 0 Destination Outer-Loop Count */ +#define MDMA_D0_X_MODIFY 0xFFC01F14 /* MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA_D0_Y_MODIFY 0xFFC01F1C /* MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC01F20 /* MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA_D0_CURR_ADDR 0xFFC01F24 /* MemDMA1 Stream 0 Destination Current Address */ +#define MDMA_D0_CURR_X_COUNT 0xFFC01F30 /* MemDMA1 Stream 0 Dest Current Inner-Loop Count */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC01F38 /* MemDMA1 Stream 0 Dest Current Outer-Loop Count */ +#define MDMA_D0_IRQ_STATUS 0xFFC01F28 /* MemDMA1 Stream 0 Destination Interrupt/Status */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC01F2C /* MemDMA1 Stream 0 Destination Peripheral Map */ + +#define MDMA_S0_CONFIG 0xFFC01F48 /* MemDMA1 Stream 0 Source Configuration */ +#define MDMA_S0_NEXT_DESC_PTR 0xFFC01F40 /* MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA_S0_START_ADDR 0xFFC01F44 /* MemDMA1 Stream 0 Source Start Address */ +#define MDMA_S0_X_COUNT 0xFFC01F50 /* MemDMA1 Stream 0 Source Inner-Loop Count */ +#define MDMA_S0_Y_COUNT 0xFFC01F58 /* MemDMA1 Stream 0 Source Outer-Loop Count */ +#define MDMA_S0_X_MODIFY 0xFFC01F54 /* MemDMA1 Stream 0 Source Inner-Loop Address-Increment */ +#define MDMA_S0_Y_MODIFY 0xFFC01F5C /* MemDMA1 Stream 0 Source Outer-Loop Address-Increment */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC01F60 /* MemDMA1 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA_S0_CURR_ADDR 0xFFC01F64 /* MemDMA1 Stream 0 Source Current Address */ +#define MDMA_S0_CURR_X_COUNT 0xFFC01F70 /* MemDMA1 Stream 0 Source Current Inner-Loop Count */ +#define MDMA_S0_CURR_Y_COUNT ` 0xFFC01F78 /* MemDMA1 Stream 0 Source Current Outer-Loop Count */ +#define MDMA_S0_IRQ_STATUS 0xFFC01F68 /* MemDMA1 Stream 0 Source Interrupt/Status */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC01F6C /* MemDMA1 Stream 0 Source Peripheral Map */ + +#define MDMA_D1_CONFIG 0xFFC01F88 /* MemDMA1 Stream 1 Destination Configuration */ +#define MDMA_D1_NEXT_DESC_PTR 0xFFC01F80 /* MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA_D1_START_ADDR 0xFFC01F84 /* MemDMA1 Stream 1 Destination Start Address */ +#define MDMA_D1_X_COUNT 0xFFC01F90 /* MemDMA1 Stream 1 Destination Inner-Loop Count */ +#define MDMA_D1_Y_COUNT 0xFFC01F98 /* MemDMA1 Stream 1 Destination Outer-Loop Count */ +#define MDMA_D1_X_MODIFY 0xFFC01F94 /* MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA_D1_Y_MODIFY 0xFFC01F9C /* MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC01FA0 /* MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */ +#define MDMA_D1_CURR_ADDR 0xFFC01FA4 /* MemDMA1 Stream 1 Dest Current Address */ +#define MDMA_D1_CURR_X_COUNT 0xFFC01FB0 /* MemDMA1 Stream 1 Dest Current Inner-Loop Count */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC01FB8 /* MemDMA1 Stream 1 Dest Current Outer-Loop Count */ +#define MDMA_D1_IRQ_STATUS 0xFFC01FA8 /* MemDMA1 Stream 1 Dest Interrupt/Status */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC01FAC /* MemDMA1 Stream 1 Dest Peripheral Map */ + +#define MDMA_S1_CONFIG 0xFFC01FC8 /* MemDMA1 Stream 1 Source Configuration */ +#define MDMA_S1_NEXT_DESC_PTR 0xFFC01FC0 /* MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA_S1_START_ADDR 0xFFC01FC4 /* MemDMA1 Stream 1 Source Start Address */ +#define MDMA_S1_X_COUNT 0xFFC01FD0 /* MemDMA1 Stream 1 Source Inner-Loop Count */ +#define MDMA_S1_Y_COUNT 0xFFC01FD8 /* MemDMA1 Stream 1 Source Outer-Loop Count */ +#define MDMA_S1_X_MODIFY 0xFFC01FD4 /* MemDMA1 Stream 1 Source Inner-Loop Address-Increment */ +#define MDMA_S1_Y_MODIFY 0xFFC01FDC /* MemDMA1 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC01FE0 /* MemDMA1 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA_S1_CURR_ADDR 0xFFC01FE4 /* MemDMA1 Stream 1 Source Current Address */ +#define MDMA_S1_CURR_X_COUNT 0xFFC01FF0 /* MemDMA1 Stream 1 Source Current Inner-Loop Count */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC01FF8 /* MemDMA1 Stream 1 Source Current Outer-Loop Count */ +#define MDMA_S1_IRQ_STATUS 0xFFC01FE8 /* MemDMA1 Stream 1 Source Interrupt/Status */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC01FEC /* MemDMA1 Stream 1 Source Peripheral Map */ + +#define DMA0_CONFIG 0xFFC01C08 /* DMA1 Channel 0 Configuration register */ +#define DMA0_NEXT_DESC_PTR 0xFFC01C00 /* DMA1 Channel 0 Next Descripter Ptr Reg */ +#define DMA0_START_ADDR 0xFFC01C04 /* DMA1 Channel 0 Start Address */ +#define DMA0_X_COUNT 0xFFC01C10 /* DMA1 Channel 0 Inner Loop Count */ +#define DMA0_Y_COUNT 0xFFC01C18 /* DMA1 Channel 0 Outer Loop Count */ +#define DMA0_X_MODIFY 0xFFC01C14 /* DMA1 Channel 0 Inner Loop Addr Increment */ +#define DMA0_Y_MODIFY 0xFFC01C1C /* DMA1 Channel 0 Outer Loop Addr Increment */ +#define DMA0_CURR_DESC_PTR 0xFFC01C20 /* DMA1 Channel 0 Current Descriptor Pointer */ +#define DMA0_CURR_ADDR 0xFFC01C24 /* DMA1 Channel 0 Current Address Pointer */ +#define DMA0_CURR_X_COUNT 0xFFC01C30 /* DMA1 Channel 0 Current Inner Loop Count */ +#define DMA0_CURR_Y_COUNT 0xFFC01C38 /* DMA1 Channel 0 Current Outer Loop Count */ +#define DMA0_IRQ_STATUS 0xFFC01C28 /* DMA1 Channel 0 Interrupt Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC01C2C /* DMA1 Channel 0 Peripheral Map Register */ + +#define DMA1_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */ +#define DMA1_NEXT_DESC_PTR 0xFFC00C00 /* DMA2 Channel 0 Next Descripter Ptr Reg */ +#define DMA1_START_ADDR 0xFFC00C04 /* DMA2 Channel 0 Start Address */ +#define DMA1_X_COUNT 0xFFC00C10 /* DMA2 Channel 0 Inner Loop Count */ +#define DMA1_Y_COUNT 0xFFC00C18 /* DMA2 Channel 0 Outer Loop Count */ +#define DMA1_X_MODIFY 0xFFC00C14 /* DMA2 Channel 0 Inner Loop Addr Increment */ +#define DMA1_Y_MODIFY 0xFFC00C1C /* DMA2 Channel 0 Outer Loop Addr Increment */ +#define DMA1_CURR_DESC_PTR 0xFFC00C20 /* DMA2 Channel 0 Current Descriptor Pointer */ +#define DMA1_CURR_ADDR 0xFFC00C24 /* DMA2 Channel 0 Current Address Pointer */ +#define DMA1_CURR_X_COUNT 0xFFC00C30 /* DMA2 Channel 0 Current Inner Loop Count */ +#define DMA1_CURR_Y_COUNT 0xFFC00C38 /* DMA2 Channel 0 Current Outer Loop Count */ +#define DMA1_IRQ_STATUS 0xFFC00C28 /* DMA2 Channel 0 Interrupt /Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C2C /* DMA2 Channel 0 Peripheral Map Register */ + +#define DMA2_CONFIG 0xFFC00C48 /* DMA2 Channel 1 Configuration register */ +#define DMA2_NEXT_DESC_PTR 0xFFC00C40 /* DMA2 Channel 1 Next Descripter Ptr Reg */ +#define DMA2_START_ADDR 0xFFC00C44 /* DMA2 Channel 1 Start Address */ +#define DMA2_X_COUNT 0xFFC00C50 /* DMA2 Channel 1 Inner Loop Count */ +#define DMA2_Y_COUNT 0xFFC00C58 /* DMA2 Channel 1 Outer Loop Count */ +#define DMA2_X_MODIFY 0xFFC00C54 /* DMA2 Channel 1 Inner Loop Addr Increment */ +#define DMA2_Y_MODIFY 0xFFC00C5C /* DMA2 Channel 1 Outer Loop Addr Increment */ +#define DMA2_CURR_DESC_PTR 0xFFC00C60 /* DMA2 Channel 1 Current Descriptor Pointer */ +#define DMA2_CURR_ADDR 0xFFC00C64 /* DMA2 Channel 1 Current Address Pointer */ +#define DMA2_CURR_X_COUNT 0xFFC00C70 /* DMA2 Channel 1 Current Inner Loop Count */ +#define DMA2_CURR_Y_COUNT 0xFFC00C78 /* DMA2 Channel 1 Current Outer Loop Count */ +#define DMA2_IRQ_STATUS 0xFFC00C68 /* DMA2 Channel 1 Interrupt /Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00C6C /* DMA2 Channel 1 Peripheral Map Register */ + +#define DMA3_CONFIG 0xFFC00C88 /* DMA2 Channel 2 Configuration register */ +#define DMA3_NEXT_DESC_PTR 0xFFC00C80 /* DMA2 Channel 2 Next Descripter Ptr Reg */ +#define DMA3_START_ADDR 0xFFC00C84 /* DMA2 Channel 2 Start Address */ +#define DMA3_X_COUNT 0xFFC00C90 /* DMA2 Channel 2 Inner Loop Count */ +#define DMA3_Y_COUNT 0xFFC00C98 /* DMA2 Channel 2 Outer Loop Count */ +#define DMA3_X_MODIFY 0xFFC00C94 /* DMA2 Channel 2 Inner Loop Addr Increment */ +#define DMA3_Y_MODIFY 0xFFC00C9C /* DMA2 Channel 2 Outer Loop Addr Increment */ +#define DMA3_CURR_DESC_PTR 0xFFC00CA0 /* DMA2 Channel 2 Current Descriptor Pointer */ +#define DMA3_CURR_ADDR 0xFFC00CA4 /* DMA2 Channel 2 Current Address Pointer */ +#define DMA3_CURR_X_COUNT 0xFFC00CB0 /* DMA2 Channel 2 Current Inner Loop Count */ +#define DMA3_CURR_Y_COUNT 0xFFC00CB8 /* DMA2 Channel 2 Current Outer Loop Count */ +#define DMA3_IRQ_STATUS 0xFFC00CA8 /* DMA2 Channel 2 Interrupt /Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CAC /* DMA2 Channel 2 Peripheral Map Register */ + +#define DMA4_CONFIG 0xFFC00CC8 /* DMA2 Channel 3 Configuration register */ +#define DMA4_NEXT_DESC_PTR 0xFFC00CC0 /* DMA2 Channel 3 Next Descripter Ptr Reg */ +#define DMA4_START_ADDR 0xFFC00CC4 /* DMA2 Channel 3 Start Address */ +#define DMA4_X_COUNT 0xFFC00CD0 /* DMA2 Channel 3 Inner Loop Count */ +#define DMA4_Y_COUNT 0xFFC00CD8 /* DMA2 Channel 3 Outer Loop Count */ +#define DMA4_X_MODIFY 0xFFC00CD4 /* DMA2 Channel 3 Inner Loop Addr Increment */ +#define DMA4_Y_MODIFY 0xFFC00CDC /* DMA2 Channel 3 Outer Loop Addr Increment */ +#define DMA4_CURR_DESC_PTR 0xFFC00CE0 /* DMA2 Channel 3 Current Descriptor Pointer */ +#define DMA4_CURR_ADDR 0xFFC00CE4 /* DMA2 Channel 3 Current Address Pointer */ +#define DMA4_CURR_X_COUNT 0xFFC00CF0 /* DMA2 Channel 3 Current Inner Loop Count */ +#define DMA4_CURR_Y_COUNT 0xFFC00CF8 /* DMA2 Channel 3 Current Outer Loop Count */ +#define DMA4_IRQ_STATUS 0xFFC00CE8 /* DMA2 Channel 3 Interrupt /Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00CEC /* DMA2 Channel 3 Peripheral Map Register */ + +#define DMA5_CONFIG 0xFFC00D08 /* DMA2 Channel 4 Configuration register */ +#define DMA5_NEXT_DESC_PTR 0xFFC00D00 /* DMA2 Channel 4 Next Descripter Ptr Reg */ +#define DMA5_START_ADDR 0xFFC00D04 /* DMA2 Channel 4 Start Address */ +#define DMA5_X_COUNT 0xFFC00D10 /* DMA2 Channel 4 Inner Loop Count */ +#define DMA5_Y_COUNT 0xFFC00D18 /* DMA2 Channel 4 Outer Loop Count */ +#define DMA5_X_MODIFY 0xFFC00D14 /* DMA2 Channel 4 Inner Loop Addr Increment */ +#define DMA5_Y_MODIFY 0xFFC00D1C /* DMA2 Channel 4 Outer Loop Addr Increment */ +#define DMA5_CURR_DESC_PTR 0xFFC00D20 /* DMA2 Channel 4 Current Descriptor Pointer */ +#define DMA5_CURR_ADDR 0xFFC00D24 /* DMA2 Channel 4 Current Address Pointer */ +#define DMA5_CURR_X_COUNT 0xFFC00D30 /* DMA2 Channel 4 Current Inner Loop Count */ +#define DMA5_CURR_Y_COUNT 0xFFC00D38 /* DMA2 Channel 4 Current Outer Loop Count */ +#define DMA5_IRQ_STATUS 0xFFC00D28 /* DMA2 Channel 4 Interrupt /Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D2C /* DMA2 Channel 4 Peripheral Map Register */ + +#define DMA6_CONFIG 0xFFC00D48 /* DMA2 Channel 5 Configuration register */ +#define DMA6_NEXT_DESC_PTR 0xFFC00D40 /* DMA2 Channel 5 Next Descripter Ptr Reg */ +#define DMA6_START_ADDR 0xFFC00D44 /* DMA2 Channel 5 Start Address */ +#define DMA6_X_COUNT 0xFFC00D50 /* DMA2 Channel 5 Inner Loop Count */ +#define DMA6_Y_COUNT 0xFFC00D58 /* DMA2 Channel 5 Outer Loop Count */ +#define DMA6_X_MODIFY 0xFFC00D54 /* DMA2 Channel 5 Inner Loop Addr Increment */ +#define DMA6_Y_MODIFY 0xFFC00D5C /* DMA2 Channel 5 Outer Loop Addr Increment */ +#define DMA6_CURR_DESC_PTR 0xFFC00D60 /* DMA2 Channel 5 Current Descriptor Pointer */ +#define DMA6_CURR_ADDR 0xFFC00D64 /* DMA2 Channel 5 Current Address Pointer */ +#define DMA6_CURR_X_COUNT 0xFFC00D70 /* DMA2 Channel 5 Current Inner Loop Count */ +#define DMA6_CURR_Y_COUNT 0xFFC00D78 /* DMA2 Channel 5 Current Outer Loop Count */ +#define DMA6_IRQ_STATUS 0xFFC00D68 /* DMA2 Channel 5 Interrupt /Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00D6C /* DMA2 Channel 5 Peripheral Map Register */ + +#define DMA7_CONFIG 0xFFC00D88 /* DMA2 Channel 6 Configuration register */ +#define DMA7_NEXT_DESC_PTR 0xFFC00D80 /* DMA2 Channel 6 Next Descripter Ptr Reg */ +#define DMA7_START_ADDR 0xFFC00D84 /* DMA2 Channel 6 Start Address */ +#define DMA7_X_COUNT 0xFFC00D90 /* DMA2 Channel 6 Inner Loop Count */ +#define DMA7_Y_COUNT 0xFFC00D98 /* DMA2 Channel 6 Outer Loop Count */ +#define DMA7_X_MODIFY 0xFFC00D94 /* DMA2 Channel 6 Inner Loop Addr Increment */ +#define DMA7_Y_MODIFY 0xFFC00D9C /* DMA2 Channel 6 Outer Loop Addr Increment */ +#define DMA7_CURR_DESC_PTR 0xFFC00DA0 /* DMA2 Channel 6 Current Descriptor Pointer */ +#define DMA7_CURR_ADDR 0xFFC00DA4 /* DMA2 Channel 6 Current Address Pointer */ +#define DMA7_CURR_X_COUNT 0xFFC00DB0 /* DMA2 Channel 6 Current Inner Loop Count */ +#define DMA7_CURR_Y_COUNT 0xFFC00DB8 /* DMA2 Channel 6 Current Outer Loop Count */ +#define DMA7_IRQ_STATUS 0xFFC00DA8 /* DMA2 Channel 6 Interrupt /Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DAC /* DMA2 Channel 6 Peripheral Map Register */ + +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status register */ + +/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */ +#define WDSIZE8 0x00000000 /* Word Size 8 bits */ +#define WDSIZE16 0x00000004 /* Word Size 16 bits */ +#define WDSIZE32 0x00000008 /* Word Size 32 bits */ + +#endif /* _DEF_BF561_H */ diff --git a/include/asm-blackfin/arch-bf561/defBF561_extn.h b/include/asm-blackfin/arch-bf561/defBF561_extn.h new file mode 100644 index 0000000..b309b74 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/defBF561_extn.h @@ -0,0 +1,76 @@ +/* + * defBF561_extn.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _DEF_BF561_EXTN_H +#define _DEF_BF561_EXTN_H + +#define OFFSET_( x ) ((x) & 0x0000FFFF) /* define macro for offset */ +/* Delay inserted for PLL transition */ +#define PLL_DELAY 0x1000 + +#define L1_ISRAM 0xFFA00000 +#define L1_ISRAM_END 0xFFA10000 +#define DATA_BANKA_SRAM 0xFF800000 +#define DATA_BANKA_SRAM_END 0xFF808000 +#define DATA_BANKB_SRAM 0xFF900000 +#define DATA_BANKB_SRAM_END 0xFF908000 +#define SYSMMR_BASE 0xFFC00000 +#define WDSIZE16 0x00000004 + +/* Event Vector Table Address */ +#define EVT_EMULATION_ADDR 0xffe02000 +#define EVT_RESET_ADDR 0xffe02004 +#define EVT_NMI_ADDR 0xffe02008 +#define EVT_EXCEPTION_ADDR 0xffe0200c +#define EVT_GLOBAL_INT_ENB_ADDR 0xffe02010 +#define EVT_HARDWARE_ERROR_ADDR 0xffe02014 +#define EVT_TIMER_ADDR 0xffe02018 +#define EVT_IVG7_ADDR 0xffe0201c +#define EVT_IVG8_ADDR 0xffe02020 +#define EVT_IVG9_ADDR 0xffe02024 +#define EVT_IVG10_ADDR 0xffe02028 +#define EVT_IVG11_ADDR 0xffe0202c +#define EVT_IVG12_ADDR 0xffe02030 +#define EVT_IVG13_ADDR 0xffe02034 +#define EVT_IVG14_ADDR 0xffe02038 +#define EVT_IVG15_ADDR 0xffe0203c +#define EVT_OVERRIDE_ADDR 0xffe02100 + +/* IMASK Bit values */ +#define IVG15_POS 0x00008000 +#define IVG14_POS 0x00004000 +#define IVG13_POS 0x00002000 +#define IVG12_POS 0x00001000 +#define IVG11_POS 0x00000800 +#define IVG10_POS 0x00000400 +#define IVG9_POS 0x00000200 +#define IVG8_POS 0x00000100 +#define IVG7_POS 0x00000080 +#define IVGTMR_POS 0x00000040 +#define IVGHW_POS 0x00000020 + +#define WDOG_TMR_DISABLE (0xAD << 4) +#define ICTL_RST 0x00000000 +#define ICTL_NMI 0x00000002 +#define ICTL_GP 0x00000004 +#define ICTL_DISABLE 0x00000003 + +/* Watch Dog timer values setup */ +#define WATCHDOG_DISABLE WDOG_TMR_DISABLE | ICTL_DISABLE + +#endif /* _DEF_BF561_EXTN_H */ diff --git a/include/asm-blackfin/arch-bf561/irq.h b/include/asm-blackfin/arch-bf561/irq.h new file mode 100644 index 0000000..2f7dd99 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/irq.h @@ -0,0 +1,137 @@ +/* + * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * Changed by HuTao Apr18, 2003 + * + * Copyright was missing when I got the code so took from MIPS arch ...MaTed--- + * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle + * + * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca> + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com> + * + * Adapted for BlackFin BF533 by Bas Vermeulen <bas@buyways.nl> + * Copyright (c) 2003 BuyWays B.V. (www.buyways.nl) + * Copyright (c) 2004 LG Soft India. + * Copyright (c) 2004 HHTech. + * + * Adapted for BlackFin BF561 by Bas Vermeulen <bas@buyways.nl> + * Copyright (c) 2005 BuyWays B.V. (www.buyways.nl) + */ + +#ifndef _BF561_IRQ_H_ +#define _BF561_IRQ_H_ + +/* + * Interrupt source definitions: + * Event Source Core Event Name IRQ No + * Emulation Events EMU 0 + * Reset RST 1 + * NMI NMI 2 + * Exception EVX 3 + * Reserved -- 4 + * Hardware Error IVHW 5 + * Core Timer IVTMR 6 + * + * PLL Wakeup Interrupt IVG7 7 + * DMA1 Error (generic) IVG7 8 + * DMA2 Error (generic) IVG7 9 + * IMDMA Error (generic) IVG7 10 + * PPI1 Error Interrupt IVG7 11 + * PPI2 Error Interrupt IVG7 12 + * SPORT0 Error Interrupt IVG7 13 + * SPORT1 Error Interrupt IVG7 14 + * SPI Error Interrupt IVG7 15 + * UART Error Interrupt IVG7 16 + * Reserved Interrupt IVG7 17 + * + * DMA1 0 Interrupt(PPI1) IVG8 18 + * DMA1 1 Interrupt(PPI2) IVG8 19 + * DMA1 2 Interrupt IVG8 20 + * DMA1 3 Interrupt IVG8 21 + * DMA1 4 Interrupt IVG8 22 + * DMA1 5 Interrupt IVG8 23 + * DMA1 6 Interrupt IVG8 24 + * DMA1 7 Interrupt IVG8 25 + * DMA1 8 Interrupt IVG8 26 + * DMA1 9 Interrupt IVG8 27 + * DMA1 10 Interrupt IVG8 28 + * DMA1 11 Interrupt IVG8 29 + * + * DMA2 0 (SPORT0 RX) IVG9 30 + * DMA2 1 (SPORT0 TX) IVG9 31 + * DMA2 2 (SPORT1 RX) IVG9 32 + * DMA2 3 (SPORT2 TX) IVG9 33 + * DMA2 4 (SPI) IVG9 34 + * DMA2 5 (UART RX) IVG9 35 + * DMA2 6 (UART TX) IVG9 36 + * DMA2 7 Interrupt IVG9 37 + * DMA2 8 Interrupt IVG9 38 + * DMA2 9 Interrupt IVG9 39 + * DMA2 10 Interrupt IVG9 40 + * DMA2 11 Interrupt IVG9 41 + * + * TIMER 0 Interrupt IVG10 42 + * TIMER 1 Interrupt IVG10 43 + * TIMER 2 Interrupt IVG10 44 + * TIMER 3 Interrupt IVG10 45 + * TIMER 4 Interrupt IVG10 46 + * TIMER 5 Interrupt IVG10 47 + * TIMER 6 Interrupt IVG10 48 + * TIMER 7 Interrupt IVG10 49 + * TIMER 8 Interrupt IVG10 50 + * TIMER 9 Interrupt IVG10 51 + * TIMER 10 Interrupt IVG10 52 + * TIMER 11 Interrupt IVG10 53 + * + * Programmable Flags0 A (8) IVG11 54 + * Programmable Flags0 B (8) IVG11 55 + * Programmable Flags1 A (8) IVG11 56 + * Programmable Flags1 B (8) IVG11 57 + * Programmable Flags2 A (8) IVG11 58 + * Programmable Flags2 B (8) IVG11 59 + * + * MDMA1 0 write/read INT IVG8 60 + * MDMA1 1 write/read INT IVG8 61 + * + * MDMA2 0 write/read INT IVG9 62 + * MDMA2 1 write/read INT IVG9 63 + * + * IMDMA 0 write/read INT IVG12 64 + * IMDMA 1 write/read INT IVG12 65 + * + * Watch Dog Timer IVG13 66 + * + * Reserved interrupt IVG7 67 + * Reserved interrupt IVG7 68 + * Supplemental interrupt 0 IVG7 69 + * supplemental interrupt 1 IVG7 70 + * + * Software Interrupt 1 IVG14 71 + * Software Interrupt 2 IVG15 72 + */ + +/* + * The ABSTRACT IRQ definitions + * the first seven of the following are fixed, + * the rest you change if you need to. + */ +/* IVG 0-6 */ +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* Reset */ +#define IRQ_NMI 2 /* Non Maskable Interrupt */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* Reserved interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define IRQ_UART_RX_BIT 0x10000000 +#define IRQ_UART_TX_BIT 0x20000000 +#define IRQ_UART_ERROR_BIT 0x200 + +#endif /* _BF561_IRQ_H_ */ diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h new file mode 100644 index 0000000..8d826fa --- /dev/null +++ b/include/configs/bf561-ezkit.h @@ -0,0 +1,244 @@ +/* + * U-boot - Configuration file for BF561 EZKIT board + */ + +#ifndef __CONFIG_EZKIT561_H__ +#define __CONFIG_EZKIT561_H__ + +#define CONFIG_VDSP 1 +#define CONFIG_BF561 1 + +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_BAUDRATE 57600 +/* Set default serial console for bf537 */ +#define CONFIG_UART_CONSOLE 0 +#define CONFIG_EZKIT561 1 +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_PANIC_HANG 1 + +/* +* Boot Mode Set +* Blackfin can support several boot modes +*/ +#define BF561_BYPASS_BOOT 0x21 +#define BF561_PARA_BOOT 0x22 +#define BF561_SPI_BOOT 0x24 +/* Define the boot mode */ +#define BFIN_BOOT_MODE BF561_BYPASS_BOOT + +/* This sets the default state of the cache on U-Boot's boot */ +#define CONFIG_ICACHE_ON +#define CONFIG_DCACHE_ON + +/* Define where the uboot will be loaded by on-chip boot rom */ +#define APP_ENTRY 0x00001000 + +/* + * Stringize definitions - needed for environmental settings + */ +#define STRINGIZE2(x) #x +#define STRINGIZE(x) STRINGIZE2(x) + +/* + * Board settings + */ +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x2C010300 +#define CONFIG_ASYNC_EBIU_BASE CONFIG_SMC91111_BASE & ~(4*1024*1024) +#define CONFIG_SMC_USE_32_BIT 1 +#define CONFIG_MISC_INIT_R 1 + +/* + * Clock settings + */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 30000000 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 20 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 +/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider */ +/* Values can range from 2-65535 */ +/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ +#define CONFIG_SPI_BAUD 2 +#define CONFIG_SPI_BAUD_INITBLOCK 4 + +/* + * Network settings + */ +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME ezkit561 +#define CONFIG_ROOTPATH /arm-cross-build/BF561/uClinux-dist/romfs +#endif /* CONFIG_DRIVER_SMC91111 */ + +/* + * Flash settings + */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI_AMD_RESET +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_FLASH_BASE 0x20000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 135 /* max number of sectors on one chip */ +#define CFG_ENV_ADDR 0x20020000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 8 + +/* + * SDRAM settings & memory map + */ + +#define CONFIG_MEM_SIZE 64 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC16M16A2TG_75 1 + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024) + +#define CFG_MEMTEST_START 0x0 /* memtest works on */ +#define CFG_MEMTEST_END ( (CONFIG_MEM_SIZE - 1) * 1024*1024) /* 1 ... 63 MB in DRAM */ + +#define CONFIG_LOADADDR 0x01000000 /* default load address */ +#define CFG_LOAD_ADDR CONFIG_LOADADDR +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) + +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) + +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +/* + * Command settings + */ + +#define CFG_AUTOLOAD "no" /* rarpb, bootp, dhcp commands will */ + /* only perform a configuration */ + /* lookup from the BOOTP/DHCP server */ + /* but not try to load any image */ + /* using TFTP */ +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, */ + /* currently its disabled */ +#define CONFIG_BOOTCOMMAND "run ramboot" +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" + +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DHCP) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ + "$(rootpath) console=ttyBF0,57600\0" \ + "addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \ + "$(gatewayip):$(netmask):$(hostname):eth0:off\0" \ + "ramboot=tftpboot $(loadaddr) linux; " \ + "run ramargs; run addip; bootelf\0" \ + "nfsboot=tftpboot $(loadaddr) linux; " \ + "run nfsargs; run addip; bootelf\0" \ + "update=tftpboot $(loadaddr) u-boot.bin; " \ + "protect off 0x20000000 0x2003FFFF; " \ + "erase 0x20000000 0x2003FFFF; " \ + "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \ + "" +#else +#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ + CFG_CMD_ELF | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "flashboot=bootm 0x20100000\0" \ + "" +#endif + +#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Console settings + */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_LOADS_ECHO 1 + +/* + * Miscellaneous configurable options + */ +#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ +#define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ + +/* + * FLASH organization and environment definitions + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +#define AMGCTLVAL 0x3F +#define AMBCTL0VAL 0x7BB07BB0 +#define AMBCTL1VAL 0xFFC27BB0 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#endif /* __CONFIG_EZKIT561_H__ */ |