diff options
31 files changed, 2692 insertions, 283 deletions
@@ -2,6 +2,15 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Patch by Curt Brune, 17 May 2004: + - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC) + - Add support for ESPD-Inc. EVB4510 Board + +* Patch by Marc Leeman, 11 May 2004: + Fix for MPC8245 - reading PPC Memory from another device with the + PPC as PCI target device corrupts data due to interenal hardware + buffering. + * Fix "cls" command when used with splash screen * Increase NFS download timeout (now 1 min - 10 sec is to short for a @@ -75,6 +75,12 @@ N: Oliver Brown E: obrown@adventnetworks.com D: Port to the gw8260 board +N: Curt Brune +E: curt@cucy.com +D: Added support for Samsung S3C4510B CPU (ARM7tdmi based SoC) +D: Added support for ESPD-Inc. EVB4510 Board +W: http://www.cucy.com + N: Jonathan De Bruyne E: jonathan.debruyne@siemens.atea.be D: Port to Siemens IAD210 board @@ -131,7 +131,7 @@ LIST_SA="assabet dnp1110 gcplus lart shannon" ## ARM7 Systems ######################################################################### -LIST_ARM7="B2 ep7312 impa7" +LIST_ARM7="B2 ep7312 evb4510 impa7 modnet50" ######################################################################### ## ARM9 Systems @@ -1183,6 +1183,9 @@ impa7_config : unconfig modnet50_config : unconfig @./mkconfig $(@:_config=) arm arm720t modnet50 +evb4510_config : unconfig + @./mkconfig $(@:_config=) arm arm720t evb4510 + ######################################################################### ## AT91RM9200 Systems ######################################################################### diff --git a/board/evb4510/Makefile b/board/evb4510/Makefile new file mode 100644 index 0000000..1ab4dfb --- /dev/null +++ b/board/evb4510/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := evb4510.o flash.o +SOBJS := memsetup.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/evb4510/config.mk b/board/evb4510/config.mk new file mode 100644 index 0000000..4d1a019 --- /dev/null +++ b/board/evb4510/config.mk @@ -0,0 +1,27 @@ +# +# Copyright (c) 2004 Cucy Systems (http://www.cucy.com) +# Curt Brune <curt@cucy.com> +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0x007d0000 diff --git a/board/evb4510/evb4510.c b/board/evb4510/evb4510.c new file mode 100644 index 0000000..72d1f4e --- /dev/null +++ b/board/evb4510/evb4510.c @@ -0,0 +1,86 @@ +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/hardware.h> +#include <command.h> + +/* ------------------------------------------------------------------------- */ + + +#define PUT_LED(val) (PUT_REG(REG_IOPDATA, (~val)&0xFF)) +#define GET_LED() ((~GET_REG( REG_IOPDATA)) & 0xFF) +#define SET_LED(val) { u32 led = GET_LED(); led |= 1 << (val); PUT_LED( led); } +#define CLR_LED(val) { u32 led = GET_LED(); led &= ~(1 << (val)); PUT_LED( led); } + +/* + * Miscelaneous platform dependent initialisations + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + icache_enable(); + + /* address for the kernel command line */ + gd->bd->bi_boot_params = 0x800; + + /* enable board LEDs for output */ + PUT_REG( REG_IOPDATA, 0x0); + PUT_REG( REG_IOPMODE, 0xFFFF); + PUT_REG( REG_IOPDATA, 0xFF); + + /* enable LED 7 to show we're alive */ + SET_LED( 7); + + /* configure free running timer 1 */ + /* Stop timer 1 */ + CLR_REG( REG_TMOD, TM1_RUN); + + /* Configure for toggle mode */ + SET_REG( REG_TMOD, TM1_TOGGLE); + + /* Load Timer data register with count down value */ + PUT_REG( REG_TDATA1, 0xFFFFFFFF); + + /* Clear timer counter register */ + PUT_REG( REG_TCNT1, 0x0); + + /* Start timer -- count down timer */ + SET_REG( REG_TMOD, TM1_RUN); + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; +#if CONFIG_NR_DRAM_BANKS == 2 + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; +#endif + return 0; +} diff --git a/board/evb4510/flash.c b/board/evb4510/flash.c new file mode 100644 index 0000000..5491827 --- /dev/null +++ b/board/evb4510/flash.c @@ -0,0 +1,540 @@ +/* + * + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/hardware.h> +#include <flash.h> + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +typedef enum { + FLASH_DEV_U9_512KB = 0, + FLASH_DEV_U7_2MB = 1 +} FLASH_DEV; + +#define FLASH_DQ7 (0x80) +#define FLASH_DQ5 (0x20) + +#define PROG_ADDR (0xAAA) +#define SETUP_ADDR (0xAAA) +#define ID_ADDR (0xAAA) +#define UNLOCK_ADDR1 (0xAAA) +#define UNLOCK_ADDR2 (0x555) + +#define UNLOCK_CMD1 (0xAA) +#define UNLOCK_CMD2 (0x55) +#define ERASE_SUSPEND_CMD (0xB0) +#define ERASE_RESUME_CMD (0x30) +#define RESET_CMD (0xF0) +#define ID_CMD (0x90) +#define SELECT_CMD (0x90) +#define CHIPERASE_CMD (0x10) +#define BYPASS_CMD (0x20) +#define SECERASE_CMD (0x30) +#define PROG_CMD (0xa0) +#define SETUP_CMD (0x80) + +#if 0 +#define WRITE_UNLOCK(addr) { \ + PUT__U8( addr + UNLOCK_ADDR1, UNLOCK_CMD1); \ + PUT__U8( addr + UNLOCK_ADDR2, UNLOCK_CMD2); \ +} + +/* auto select command */ +#define CMD_ID(addr) WRITE_UNLOCK(addr); { \ + PUT__U8( addr + ID_ADDR, ID_CMD); \ +} + +#define CMD_RESET(addr) WRITE_UNLOCK(addr); { \ + PUT__U8( addr + ID_ADDR, RESET_CMD); \ +} + +#define CMD_ERASE_SEC(base, addr) WRITE_UNLOCK(base); \ + PUT__U8( base + SETUP_ADDR, SETUP_CMD); \ + WRITE_UNLOCK(base); \ + PUT__U8( addr, SECERASE_CMD); + +#define CMD_ERASE_CHIP(base) WRITE_UNLOCK(base); \ + PUT__U8( base + SETUP_ADDR, SETUP_CMD); \ + WRITE_UNLOCK(base); \ + PUT__U8( base + SETUP_ADDR, CHIPERASE_CMD); + +/* prepare for bypass programming */ +#define CMD_UNLOCK_BYPASS(addr) WRITE_UNLOCK(addr); { \ + PUT__U8( addr + ID_ADDR, 0x20); \ +} + +/* terminate bypass programming */ +#define CMD_BYPASS_RESET(addr) { \ + PUT__U8(addr, 0x90); \ + PUT__U8(addr, 0x00); \ +} +#endif + +inline static void FLASH_CMD_UNLOCK (FLASH_DEV dev, u32 base) +{ + switch (dev) { + case FLASH_DEV_U7_2MB: + PUT__U8 (base + 0xAAA, 0xAA); + PUT__U8 (base + 0x555, 0x55); + break; + case FLASH_DEV_U9_512KB: + PUT__U8 (base + 0x555, 0xAA); + PUT__U8 (base + 0x2AA, 0x55); + break; + } +} + +inline static void FLASH_CMD_SELECT (FLASH_DEV dev, u32 base) +{ + switch (dev) { + case FLASH_DEV_U7_2MB: + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (base + 0xAAA, SELECT_CMD); + break; + case FLASH_DEV_U9_512KB: + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (base + 0x555, SELECT_CMD); + break; + } +} + +inline static void FLASH_CMD_RESET (FLASH_DEV dev, u32 base) +{ + switch (dev) { + case FLASH_DEV_U7_2MB: + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (base + 0xAAA, RESET_CMD); + break; + case FLASH_DEV_U9_512KB: + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (base + 0x555, RESET_CMD); + break; + } +} + +inline static void FLASH_CMD_ERASE_SEC (FLASH_DEV dev, u32 base, u32 addr) +{ + switch (dev) { + case FLASH_DEV_U7_2MB: + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (base + 0xAAA, SETUP_CMD); + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (addr, SECERASE_CMD); + break; + case FLASH_DEV_U9_512KB: + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (base + 0x555, SETUP_CMD); + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (addr, SECERASE_CMD); + break; + } +} + +inline static void FLASH_CMD_ERASE_CHIP (FLASH_DEV dev, u32 base) +{ + switch (dev) { + case FLASH_DEV_U7_2MB: + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (base + 0xAAA, SETUP_CMD); + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (base, CHIPERASE_CMD); + break; + case FLASH_DEV_U9_512KB: + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (base + 0x555, SETUP_CMD); + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (base, CHIPERASE_CMD); + break; + } +} + +inline static void FLASH_CMD_UNLOCK_BYPASS (FLASH_DEV dev, u32 base) +{ + switch (dev) { + case FLASH_DEV_U7_2MB: + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (base + 0xAAA, BYPASS_CMD); + break; + case FLASH_DEV_U9_512KB: + FLASH_CMD_UNLOCK (dev, base); + PUT__U8 (base + 0x555, BYPASS_CMD); + break; + } +} + +inline static void FLASH_CMD_BYPASS_RESET (FLASH_DEV dev, u32 base) +{ + PUT__U8 (base, SELECT_CMD); + PUT__U8 (base, 0x0); +} + +/* poll for flash command completion */ +static u16 _flash_poll (FLASH_DEV dev, u32 addr, u16 data, ulong timeOut) +{ + u32 done = 0; + ulong t0; + + u16 error = 0; + volatile u16 flashData; + + data = data & 0xFF; + t0 = get_timer (0); + while (get_timer (t0) < timeOut) { + /* for( i = 0; i < POLL_LOOPS; i++) { */ + /* Read the Data */ + flashData = GET__U8 (addr); + + /* FLASH_DQ7 = Data? */ + if ((flashData & FLASH_DQ7) == (data & FLASH_DQ7)) { + done = 1; + break; + } + + /* Check Timeout (FLASH_DQ5==1) */ + if (flashData & FLASH_DQ5) { + /* Read the Data */ + flashData = GET__U8 (addr); + + /* FLASH_DQ7 = Data? */ + if (!((flashData & FLASH_DQ7) == (data & FLASH_DQ7))) { + printf ("_flash_poll(): FLASH_DQ7 & flashData not equal to write value\n"); + error = ERR_PROG_ERROR; + } + FLASH_CMD_RESET (dev, addr); + done = 1; + break; + } + /* spin delay */ + udelay (10); + } + + + /* error update */ + if (!done) { + printf ("_flash_poll(): Timeout\n"); + error = ERR_TIMOUT; + } + + /* Check the data */ + if (!error) { + /* Read the Data */ + flashData = GET__U8 (addr); + if (flashData != data) { + error = ERR_PROG_ERROR; + printf ("_flash_poll(): flashData(0x%04x) not equal to data(0x%04x)\n", + flashData, data); + } + } + + return error; +} + +/*----------------------------------------------------------------------- + */ +static int _flash_check_protection (flash_info_t * info, int s_first, int s_last) +{ + int sect, prot = 0; + + for (sect = s_first; sect <= s_last; sect++) + if (info->protect[sect]) { + printf (" Flash sector %d protected.\n", sect); + prot++; + } + return prot; +} + +static int _detectFlash (FLASH_DEV dev, u32 base, u8 venId, u8 devId) +{ + + u32 baseAddr = base | CACHE_DISABLE_MASK; + u8 vendorId, deviceId; + + /* printf(__FUNCTION__"(): detecting flash @ 0x%08x\n", base); */ + + /* Send auto select command and read manufacturer info */ + FLASH_CMD_SELECT (dev, baseAddr); + vendorId = GET__U8 (baseAddr); + FLASH_CMD_RESET (dev, baseAddr); + + /* Send auto select command and read device info */ + FLASH_CMD_SELECT (dev, baseAddr); + + if (dev == FLASH_DEV_U7_2MB) { + deviceId = GET__U8 (baseAddr + 2); + } else if (dev == FLASH_DEV_U9_512KB) { + deviceId = GET__U8 (baseAddr + 1); + } else { + return 0; + } + + FLASH_CMD_RESET (dev, baseAddr); + + /* printf (__FUNCTION__"(): found vendorId 0x%04x, deviceId 0x%04x\n", + vendorId, deviceId); + */ + + return (vendorId == venId) && (deviceId == devId); + +} + +/****************************************************************************** + * + * Public u-boot interface functions below + * + *****************************************************************************/ + +/*************************************************************************** + * + * Flash initialization + * + * This board has two banks of flash, but the base addresses depend on + * how the board is jumpered. + * + * The two flash types are: + * + * AMD Am29LV160DB (2MB) sectors layout 16KB, 2x8KB, 32KB, 31x64KB + * + * AMD Am29LV040B (512KB) sectors: 8x64KB + *****************************************************************************/ + +unsigned long flash_init (void) +{ + flash_info_t *info; + u16 i; + u32 flashtest; + s16 amd160 = -1; + u32 amd160base = 0; + +#if CFG_MAX_FLASH_BANKS == 2 + s16 amd040 = -1; + u32 amd040base = 0; +#endif + + /* configure PHYS_FLASH_1 */ + if (_detectFlash (FLASH_DEV_U7_2MB, PHYS_FLASH_1, 0x1, 0x49)) { + amd160 = 0; + amd160base = PHYS_FLASH_1; +#if CFG_MAX_FLASH_BANKS == 1 + } +#else + if (_detectFlash + (FLASH_DEV_U9_512KB, PHYS_FLASH_2, 0x1, 0x4F)) { + amd040 = 1; + amd040base = PHYS_FLASH_2; + } else { + printf (__FUNCTION__ + "(): Unable to detect PHYS_FLASH_2: 0x%08x\n", + PHYS_FLASH_2); + } + } else if (_detectFlash (FLASH_DEV_U9_512KB, PHYS_FLASH_1, 0x1, 0x4F)) { + amd040 = 0; + amd040base = PHYS_FLASH_1; + if (_detectFlash (FLASH_DEV_U7_2MB, PHYS_FLASH_2, 0x1, 0x49)) { + amd160 = 1; + amd160base = PHYS_FLASH_2; + } else { + printf (__FUNCTION__ + "(): Unable to detect PHYS_FLASH_2: 0x%08x\n", + PHYS_FLASH_2); + } + } +#endif + else { + printf (__FUNCTION__ + "(): Unable to detect PHYS_FLASH_1: 0x%08x\n", + PHYS_FLASH_1); + } + + /* Configure AMD Am29LV160DB (2MB) */ + info = &flash_info[amd160]; + info->flash_id = FLASH_DEV_U7_2MB; + info->sector_count = 35; + info->size = 2 * 1024 * 1024; /* 2MB */ + /* 1*16K Boot Block + 2*8K Parameter Block + 1*32K Small Main Block */ + info->start[0] = amd160base; + info->start[1] = amd160base + 0x4000; + info->start[2] = amd160base + 0x6000; + info->start[3] = amd160base + 0x8000; + for (i = 1; i < info->sector_count; i++) + info->start[3 + i] = amd160base + i * (64 * 1024); + + for (i = 0; i < info->sector_count; i++) { + /* Write auto select command sequence and query sector protection */ + FLASH_CMD_SELECT (info->flash_id, + info->start[i] | CACHE_DISABLE_MASK); + flashtest = + GET__U8 (((info->start[i] + 4) | CACHE_DISABLE_MASK)); + FLASH_CMD_RESET (info->flash_id, + amd160base | CACHE_DISABLE_MASK); + info->protect[i] = (flashtest & 0x0001); + } + + /* + * protect monitor and environment sectors in 2MB flash + */ + flash_protect (FLAG_PROTECT_SET, + amd160base, amd160base + monitor_flash_len - 1, info); + + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, CFG_ENV_ADDR + CFG_ENV_SIZE - 1, info); + +#if CFG_MAX_FLASH_BANKS == 2 + /* Configure AMD Am29LV040B (512KB) */ + info = &flash_info[amd040]; + info->flash_id = FLASH_DEV_U9_512KB; + info->sector_count = 8; + info->size = 512 * 1024; /* 512KB, 8 x 64KB */ + for (i = 0; i < info->sector_count; i++) { + info->start[i] = amd040base + i * (64 * 1024); + /* Write auto select command sequence and query sector protection */ + FLASH_CMD_SELECT (info->flash_id, + info->start[i] | CACHE_DISABLE_MASK); + flashtest = + GET__U8 (((info->start[i] + 2) | CACHE_DISABLE_MASK)); + FLASH_CMD_RESET (info->flash_id, + amd040base | CACHE_DISABLE_MASK); + info->protect[i] = (flashtest & 0x0001); + } +#endif + + return flash_info[0].size +#if CFG_MAX_FLASH_BANKS == 2 + + flash_info[1].size +#endif + ; +} + +void flash_print_info (flash_info_t * info) +{ + int i; + + if (info->flash_id == FLASH_DEV_U7_2MB) { + printf ("AMD Am29LV160DB (2MB) 16KB,2x8KB,32KB,31x64KB\n"); + } else if (info->flash_id == FLASH_DEV_U9_512KB) { + printf ("AMD Am29LV040B (512KB) 8x64KB\n"); + } else { + printf ("Unknown flash_id ...\n"); + return; + } + + printf (" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 4) == 0) + printf ("\n "); + printf (" S%02d @ 0x%08lX%s", i, + info->start[i], info->protect[i] ? " !" : " "); + } + printf ("\n"); +} + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + u16 i, error = 0; + + printf ("\n"); + + /* check flash protection bits */ + if (_flash_check_protection (info, s_first, s_last)) { + printf (" Flash erase aborted due to protected sectors\n"); + return ERR_PROTECTED; + } + + if ((s_first < info->sector_count) && (s_first <= s_last)) { + for (i = s_first; i <= s_last && !error; i++) { + printf (" Erasing Sector %d @ 0x%08lx ... ", i, + info->start[i]); + /* bypass the cache to access the flash memory */ + FLASH_CMD_ERASE_SEC (info->flash_id, + (info-> + start[0] | CACHE_DISABLE_MASK), + (info-> + start[i] | CACHE_DISABLE_MASK)); + /* look for sector to become 0xFF after erase */ + error = _flash_poll (info->flash_id, + info-> + start[i] | CACHE_DISABLE_MASK, + 0xFF, CFG_FLASH_ERASE_TOUT); + FLASH_CMD_RESET (info->flash_id, + (info-> + start[0] | CACHE_DISABLE_MASK)); + printf ("done\n"); + if (error) { + break; + } + } + } else + error = ERR_INVAL; + + return error; +} + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + u16 error = 0, i; + u32 n; + u8 *bp, *bps; + + /* Write Setup */ + /* bypass the cache to access the flash memory */ + FLASH_CMD_UNLOCK_BYPASS (info->flash_id, + (info->start[0] | CACHE_DISABLE_MASK)); + + /* Write the Data to Flash */ + + bp = (u8 *) (addr | CACHE_DISABLE_MASK); + bps = (u8 *) src; + + for (n = 0; n < cnt && !error; n++, bp++, bps++) { + + if (!(n % (cnt / 15))) { + printf ("."); + } + + /* write the flash command for flash memory */ + *bp = 0xA0; + + /* Write the data */ + *bp = *bps; + + /* Check if the write is done */ + for (i = 0; i < 0xff; i++); + error = _flash_poll (info->flash_id, (u32) bp, *bps, + CFG_FLASH_WRITE_TOUT); + if (error) { + return error; + } + } + + /* Reset the Flash Mode to read */ + FLASH_CMD_BYPASS_RESET (info->flash_id, info->start[0]); + + printf (" "); + + return error; +} diff --git a/board/evb4510/memsetup.S b/board/evb4510/memsetup.S new file mode 100644 index 0000000..915af1e --- /dev/null +++ b/board/evb4510/memsetup.S @@ -0,0 +1,157 @@ +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <config.h> +#include <version.h> +#include <asm/hardware.h> + +/*********************************************************************** + * Configure Memory Map + * + * This memory map allows us to relocate from FLASH to SRAM. After + * power-on reset the CPU only knows about the FLASH memory at address + * 0x00000000. After memsetup completes the memory map will be: + * + * Memory Addr + * 0x00000000 + * to 8MB SRAM (U5) -- 8MB Map + * 0x00800000 + * + * 0x01000000 + * to 2MB Flash @ 0x00000000 (U7) -- 2MB Map + * 0x01200000 + * + * 0x02000000 + * to 512KB Flash @ 0x02000000 (U9) -- 2MB Map + * 0x02080000 + * + * Load all 12 memory registers with the STMIA instruction since + * memory access is disabled once these registers are written. The + * last register written re-enables memory access. For more info see + * the user's manual for the S3C4510B, available from Samsung's web + * site. Search for part number "S3C4510B". + * + ***********************************************************************/ + +.globl memsetup +memsetup: + + /* preserve the temp register (r12 AKA ip) and remap it. */ + ldr r1, =SRAM_BASE+0xC + add r0, r12, #0x01000000 + str r0, [r1] + + /* remap the link register for when we return */ + add lr, lr, #0x01000000 + + /* store a short program in the on chip SRAM, which is + * unaffected when remapping memory. Note the cache must be + * disabled for the on chip SRAM to be available. + */ + ldr r1, =SRAM_BASE + ldr r0, =0xe8801ffe /* stmia r0, {r1-r12} */ + str r0, [r1] + add r1, r1, #4 + ldr r0, =0xe59fc000 /* ldr r12, [pc, #0] */ + str r0, [r1] + add r1, r1, #4 + ldr r0, =0xe1a0f00e /* mov pc, lr */ + str r0, [r1] + + adr r0, memory_map_data + ldmia r0, {r1-r12} + ldr r0, =REG_EXTDBWTH + + ldr pc, =SRAM_BASE + +.globl reset_cpu +reset_cpu: + /* + * reset the cpu by re-mapping FLASH 0 to 0x0 and jumping to + * address 0x0. We accomplish this by storing a few + * instructions into the on chip SRAM (8KB) and run from + * there. Note the cache must be disabled for the on chip + * SRAM to be available. + * + * load r2 with REG_ROMCON0 + * load r3 with 0x12040060 configure FLASH bank 0 @ 0x00000000 + * load r4 with REG_DRAMCON0 + * load r5 with 0x08000380 configure RAM bank 0 @ 0x01000000 + * load r6 with REG_REFEXTCON + * load r7 with 0x9c218360 + * load r8 with 0x0 + * store str r3,[r2] @ SRAM_BASE + * store str r5,[r4] @ SRAM_BASE + 0x4 + * store str r7,[r6] @ SRAM_BASE + 0x8 + * store mov pc,r8 @ SRAM_BASE + 0xC + * mov pc, SRAM_BASE + * + */ + + /* disable cache */ + ldr r0, =REG_SYSCFG + ldr r1, =0x83ffffa0 /* cache-disabled */ + str r1, [r0] + + ldr r2, =REG_ROMCON0 + ldr r3, =0x02000060 /* Bank0 2MB FLASH @ 0x00000000 */ + ldr r4, =REG_DRAMCON0 + ldr r5, =0x18040380 /* DRAM0 8MB SRAM @ 0x01000000 */ + ldr r6, =REG_REFEXTCON + ldr r7, =0xce278360 + ldr r8, =0x00000000 + ldr r1, =SRAM_BASE + ldr r0, =0xe5823000 /* str r3, [r2] */ + str r0, [r1] + ldr r1, =SRAM_BASE+4 + ldr r0, =0xe5845000 /* str r5, [r4] */ + str r0, [r1] + ldr r1, =SRAM_BASE+8 + ldr r0, =0xe5867000 /* str r7, [r6] */ + str r0, [r1] + ldr r1, =SRAM_BASE+0xC + ldr r0, =0xe1a0f008 /* mov pc, r8 */ + str r0, [r1] + ldr r1, =SRAM_BASE + mov pc, r1 + + /* never return */ + +/************************************************************************ + * Below are twelve 32-bit values for the twelve memory registers of + * the system manager, starting with register REG_EXTDBWTH. + ***********************************************************************/ +memory_map_data: + .long 0x00f03005 /* memory widths */ + .long 0x12040060 /* Bank0 2MB FLASH @ 0x01000000 */ + .long 0x22080060 /* Bank1 512KB FLASH @ 0x02000000 */ + .long 0x00000000 + .long 0x00000000 + .long 0x00000000 + .long 0x00000000 + .long 0x08000380 /* DRAM0 8MB SRAM @ 0x00000000 */ + .long 0x00000000 + .long 0x00000000 + .long 0x00000000 + .long 0x9c218360 /* enable memory */ diff --git a/board/evb4510/u-boot.lds b/board/evb4510/u-boot.lds new file mode 100644 index 0000000..9899790 --- /dev/null +++ b/board/evb4510/u-boot.lds @@ -0,0 +1,68 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm720t/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/board/omap730p2/omap730p2.c b/board/omap730p2/omap730p2.c index 585b6ee..870cb91 100644 --- a/board/omap730p2/omap730p2.c +++ b/board/omap730p2/omap730p2.c @@ -84,9 +84,6 @@ void toggle_backup_led(void) int board_init (void) { - volatile unsigned int *IOConfReg; - - DECLARE_GLOBAL_DATA_PTR; /* arch number of OMAP 730 P2 Board - Same as the Innovator! */ @@ -100,14 +97,12 @@ int board_init (void) peripheral_power_enable (); - /* Backup LED indication via GPIO_140 -> Red led if MUX correctly setup */ toggle_backup_led(); /* Hold GSM in reset until needed */ *((volatile unsigned short *)M_CTL) &= ~1; - /* * CSx timings, GPIO Mux ... setup */ diff --git a/board/xsengine/flash.c b/board/xsengine/flash.c index ac14bfe..bfa287b 100644 --- a/board/xsengine/flash.c +++ b/board/xsengine/flash.c @@ -532,9 +532,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) { vu_long *addr = (vu_long*)(info->start[0]); ulong start; - ulong rev; int flag; - int i; /* Check if Flash is (sufficiently) erased */ if ((*((vu_long *)dest) & data) != data) { diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c index 27e7273..e49b74d 100644 --- a/common/cmd_jffs2.c +++ b/common/cmd_jffs2.c @@ -122,21 +122,19 @@ jffs2_part_info(int part_num) int do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - struct part_info* jffs2_part_info(int); - int jffs2_1pass_load(char *, struct part_info *,const char *); - char *fsname; - + struct part_info* jffs2_part_info(int); + int jffs2_1pass_load(char *, struct part_info *,const char *); + char *fsname; char *filename; + int size; + struct part_info *part; + ulong offset = load_addr; /* pre-set Boot file name */ if ((filename = getenv("bootfile")) == NULL) { filename = "uImage"; } - ulong offset = load_addr; - int size; - struct part_info *part; - if (argc == 2) { filename = argv[1]; } diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c index 0ad5481..58eab4e 100644 --- a/cpu/arm720t/cpu.c +++ b/cpu/arm720t/cpu.c @@ -33,51 +33,7 @@ #include <common.h> #include <command.h> #include <clps7111.h> - -/* read co-processor 15, register #1 (control register) */ -static unsigned long read_p15_c1(void) -{ - unsigned long value; - - __asm__ __volatile__( - "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" - : "=r" (value) - : - : "memory"); - /* printf("p15/c1 is = %08lx\n", value); */ - return value; -} - -/* write to co-processor 15, register #1 (control register) */ -static void write_p15_c1(unsigned long value) -{ - /* printf("write %08lx to p15/c1\n", value); */ - __asm__ __volatile__( - "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" - : - : "r" (value) - : "memory"); - - read_p15_c1(); -} - -static void cp_delay (void) -{ - volatile int i; - - /* copro seems to need some delay between reading and writing */ - for (i = 0; i < 100; i++); -} - -/* See also ARM Ref. Man. */ -#define C1_MMU (1<<0) /* mmu off/on */ -#define C1_ALIGN (1<<1) /* alignment faults off/on */ -#define C1_IDC (1<<2) /* icache and/or dcache off/on */ -#define C1_WRITE_BUFFER (1<<3) /* write buffer off/on */ -#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ -#define C1_SYS_PROT (1<<8) /* system protection */ -#define C1_ROM_PROT (1<<9) /* ROM protection */ -#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ +#include <asm/hardware.h> int cpu_init (void) { @@ -103,12 +59,11 @@ int cleanup_before_linux (void) * and we set the CPU-speed to 73 MHz - see start.S for details */ +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) unsigned long i; disable_interrupts (); -#ifdef CONFIG_NETARM - return 0; -#endif + /* turn off I-cache */ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); i &= ~0x1000; @@ -116,11 +71,16 @@ int cleanup_before_linux (void) /* flush I-cache */ asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i)); - #ifdef CONFIG_ARM7_REVD /* go to high speed */ IO_SYSCON3 = (IO_SYSCON3 & ~CLKCTL) | CLKCTL_73; #endif +#elif defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) + disable_interrupts (); + /* Nothing more needed */ +#else +#error No cleanup_before_linux() defined for this CPU type +#endif return 0; } @@ -134,6 +94,57 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return (0); } +/* + * Instruction and Data cache enable and disable functions + * + */ + +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) +/* read co-processor 15, register #1 (control register) */ +static unsigned long read_p15_c1(void) +{ + unsigned long value; + + __asm__ __volatile__( + "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" + : "=r" (value) + : + : "memory"); + /* printf("p15/c1 is = %08lx\n", value); */ + return value; +} + +/* write to co-processor 15, register #1 (control register) */ +static void write_p15_c1(unsigned long value) +{ + /* printf("write %08lx to p15/c1\n", value); */ + __asm__ __volatile__( + "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" + : + : "r" (value) + : "memory"); + + read_p15_c1(); +} + +static void cp_delay (void) +{ + volatile int i; + + /* copro seems to need some delay between reading and writing */ + for (i = 0; i < 100; i++); +} + +/* See also ARM Ref. Man. */ +#define C1_MMU (1<<0) /* mmu off/on */ +#define C1_ALIGN (1<<1) /* alignment faults off/on */ +#define C1_IDC (1<<2) /* icache and/or dcache off/on */ +#define C1_WRITE_BUFFER (1<<3) /* write buffer off/on */ +#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ +#define C1_SYS_PROT (1<<8) /* system protection */ +#define C1_ROM_PROT (1<<9) /* ROM protection */ +#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ + void icache_enable (void) { ulong reg; @@ -179,3 +190,65 @@ int dcache_status (void) { return (read_p15_c1 () & C1_IDC) != 0; } + +#elif defined(CONFIG_S3C4510B) + +void icache_enable (void) +{ + s32 i; + + /* disable all cache bits */ + CLR_REG( REG_SYSCFG, 0x3F); + + /* 8KB cache, write enable */ + SET_REG( REG_SYSCFG, CACHE_WRITE_BUFF | CACHE_MODE_01); + + /* clear TAG RAM bits */ + for ( i = 0; i < 256; i++) + PUT_REG( CACHE_TAG_RAM + 4*i, 0x00000000); + + /* clear SET0 RAM */ + for(i=0; i < 1024; i++) + PUT_REG( CACHE_SET0_RAM + 4*i, 0x00000000); + + /* clear SET1 RAM */ + for(i=0; i < 1024; i++) + PUT_REG( CACHE_SET1_RAM + 4*i, 0x00000000); + + /* enable cache */ + SET_REG( REG_SYSCFG, CACHE_ENABLE); + +} + +void icache_disable (void) +{ + /* disable all cache bits */ + CLR_REG( REG_SYSCFG, 0x3F); +} + +int icache_status (void) +{ + return GET_REG( REG_SYSCFG) & CACHE_ENABLE; +} + +void dcache_enable (void) +{ + /* we don't have seperate instruction/data caches */ + icache_enable(); +} + +void dcache_disable (void) +{ + /* we don't have seperate instruction/data caches */ + icache_disable(); +} + +int dcache_status (void) +{ + /* we don't have seperate instruction/data caches */ + return icache_status(); +} + +#else +#error No icache/dcache enable/disable functions defined for this CPU type +#endif diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c index 67e581a..485443f 100644 --- a/cpu/arm720t/interrupts.c +++ b/cpu/arm720t/interrupts.c @@ -28,11 +28,8 @@ #include <common.h> #include <clps7111.h> - #include <asm/proc-armv/ptrace.h> -#ifdef CONFIG_NETARM -#include <asm/arch/netarm_registers.h> -#endif +#include <asm/hardware.h> extern void reset_cpu(ulong addr); @@ -187,7 +184,8 @@ static ulong lastdec; int interrupt_init (void) { -#ifdef CONFIG_NETARM + +#if defined(CONFIG_NETARM) /* disable all interrupts */ IRQEN = 0; @@ -198,7 +196,7 @@ int interrupt_init (void) /* set timer 2 counter */ lastdec = TIMER_LOAD_VAL; -#else +#elif defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) /* disable all interrupts */ IO_INTMR1 = 0; @@ -210,6 +208,11 @@ int interrupt_init (void) /* set timer 1 counter */ lastdec = IO_TC1D = TIMER_LOAD_VAL; +#elif defined(CONFIG_S3C4510B) + /* Nothing to do, interrupts not supported */ + lastdec = 0; +#else +#error No interrupt_init() defined for this CPU type #endif timestamp = 0; @@ -220,6 +223,9 @@ int interrupt_init (void) * timer without interrupts */ + +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) + void reset_timer (void) { reset_timer_masked (); @@ -285,3 +291,45 @@ void udelay_masked (unsigned long usec) while (get_timer_masked () < tmo) /*NOP*/; } + +#elif defined(CONFIG_S3C4510B) + +#define TMR_OFFSET (0x1000) + +void udelay (unsigned long usec) +{ + u32 rDATA; + + rDATA = t_data_us(usec); + + /* Stop timer 0 */ + CLR_REG( REG_TMOD, TM0_RUN); + + /* Configure for toggle mode */ + SET_REG( REG_TMOD, TM0_TOGGLE); + + /* Load Timer data register with count down value plus offset */ + PUT_REG( REG_TDATA0, rDATA + TMR_OFFSET); + + /* Clear timer counter register */ + PUT_REG( REG_TCNT0, 0x0); + + /* Start timer -- count down timer */ + SET_REG( REG_TMOD, TM0_RUN); + + /* spin during count down */ + while ( GET_REG( REG_TCNT0) > TMR_OFFSET); + + /* Stop timer */ + CLR_REG( REG_TMOD, TM0_RUN); + +} + +ulong get_timer (ulong base) +{ + return (0xFFFFFFFF - GET_REG( REG_TCNT1)) - base; +} + +#else +#error Timer routines not defined for this CPU type +#endif diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c index 5c6a0cc..a5da4b7 100644 --- a/cpu/arm720t/serial.c +++ b/cpu/arm720t/serial.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2002 + * (C) Copyright 2002-2004 * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> * * (C) Copyright 2002 @@ -29,9 +29,10 @@ */ #include <common.h> -#include <clps7111.h> -#ifndef CONFIG_NETARM +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) + +#include <clps7111.h> void serial_setbrg (void) { @@ -39,20 +40,15 @@ void serial_setbrg (void) unsigned int reg = 0; - if (gd->baudrate == 1200) - reg = 191; - else if (gd->baudrate == 9600) - reg = 23; - else if (gd->baudrate == 19200) - reg = 11; - else if (gd->baudrate == 38400) - reg = 5; - else if (gd->baudrate == 57600) - reg = 3; - else if (gd->baudrate == 115200) - reg = 1; - else - hang (); + switch (gd->baudrate) { + case 1200: reg = 191; break; + case 9600: reg = 23; break; + case 19200: reg = 11; break; + case 38400: reg = 5; break; + case 57600: reg = 3; break; + case 115200: reg = 1; break; + default: hang (); break; + } /* init serial serial 1,2 */ IO_SYSCON1 = SYSCON1_UART1EN; @@ -127,4 +123,4 @@ serial_puts (const char *s) } } -#endif /* CONFIG_NETARM */ +#endif /* defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) */ diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c index 8cfe049..56cdb0a 100644 --- a/cpu/arm720t/serial_netarm.c +++ b/cpu/arm720t/serial_netarm.c @@ -29,10 +29,11 @@ */ #include <common.h> -#include <asm/arch/netarm_registers.h> #ifdef CONFIG_NETARM +#include <asm/hardware.h> + #define PORTA (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA)) #define PORTB (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB)) diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S index f6ae9d6..15b9a05 100644 --- a/cpu/arm720t/start.S +++ b/cpu/arm720t/start.S @@ -26,9 +26,7 @@ #include <config.h> #include <version.h> -#ifdef CONFIG_NETARM -#include <asm/arch/netarm_registers.h> -#endif +#include <asm/hardware.h> /* ************************************************************************* @@ -166,7 +164,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _start_armboot: .word start_armboot - /* ************************************************************************* * @@ -178,6 +175,7 @@ _start_armboot: .word start_armboot ************************************************************************* */ +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) /* Interupt-Controller base addresses */ INTMR1: .word 0x80000280 @ 32 bit size @@ -195,8 +193,11 @@ SYSCON3: .word 0x80002200 #define CLKCTL_49 0x4 /* 49.152 MHz */ #define CLKCTL_73 0x6 /* 73.728 MHz */ +#endif + cpu_init_crit: -#ifndef CONFIG_NETARM +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) + /* * mask all IRQs by clearing all bits in the INTMRs */ @@ -223,7 +224,7 @@ cpu_init_crit: bic r0, r0, #0x0000008f @ clear bits 7, 3:0 (B--- WCAM) orr r0, r0, #0x00000002 @ set bit 2 (A) Align mcr p15,0,r0,c1,c0 -#else /* CONFIG_NETARM */ +#elif defined(CONFIG_NETARM) /* * prior to software reset : need to set pin PORTC4 to be *HRESET */ @@ -270,7 +271,26 @@ cpu_init_crit: mov r1, #0 ldr r0, =NETARM_GEN_MODULE_BASE str r1, [r0, #+NETARM_GEN_INTR_ENABLE] -#endif /* CONFIG_NETARM */ + +#elif defined(CONFIG_S3C4510B) + + /* + * Mask off all IRQ sources + */ + ldr r1, =REG_INTMASK + ldr r0, =0x3FFFFF + str r0, [r1] + + /* + * Disable Cache + */ + ldr r0, =REG_SYSCFG + ldr r1, =0x83ffffa0 /* cache-disabled */ + str r1, [r0] + +#else +#error No cpu_init_crit() defined for current CPU type +#endif #ifdef CONFIG_ARM7_REVD /* set clock speed */ @@ -462,10 +482,10 @@ fiq: #endif +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) .align 5 .globl reset_cpu reset_cpu: -#ifndef CONFIG_NETARM mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate cache mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4) @@ -474,7 +494,10 @@ reset_cpu: bic ip, ip, #0x2100 @ ..v....s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 -#else +#elif defined(CONFIG_NETARM) + .align 5 +.globl reset_cpu +reset_cpu: ldr r1, =NETARM_MEM_MODULE_BASE ldr r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR] ldr r1, =0xFFFFF000 @@ -491,4 +514,9 @@ reset_cpu: ldr r1, =NETARM_GEN_SW_SVC_RESETB str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE] mov pc, r0 +#elif defined(CONFIG_S3C4510B) +/* Nothing done here as reseting the CPU is board specific, depending + * on external peripherals such as watchdog timers, etc. */ +#else +#error No reset_cpu() defined for current CPU type #endif diff --git a/cpu/mpc824x/cpu_init.c b/cpu/mpc824x/cpu_init.c index 3b5fb79..08f5c4a 100644 --- a/cpu/mpc824x/cpu_init.c +++ b/cpu/mpc824x/cpu_init.c @@ -75,63 +75,80 @@ cpu_init_f (void) */ #define M_CONFIG_WRITE_HALFWORD( addr, data ) \ - __asm__ __volatile__( \ - " \ - stw %2,0(%0)\n \ - sync\n \ - sth %3,2(%1)\n \ - sync\n \ - " \ - : /* no output */ \ - : "r" (CONFIG_ADDR), "r" (CONFIG_DATA), \ - "r" (PCISWAP(addr & ~3)), "r" (PCISWAP(data << 16)) \ - ); - - M_CONFIG_WRITE_HALFWORD(PCIACR, 0x8000); + __asm__ __volatile__(" \ + stw %2,0(%0)\n \ + sync\n \ + sth %3,2(%1)\n \ + sync\n \ + " \ + : /* no output */ \ + : "r" (CONFIG_ADDR), "r" (CONFIG_DATA), \ + "r" (PCISWAP(addr & ~3)), "r" (PCISWAP(data << 16)) \ + ); + + M_CONFIG_WRITE_HALFWORD(PCIACR, 0x8000); #endif - CONFIG_WRITE_BYTE(PCLSR, 0x8); /* set PCI cache line size */ + CONFIG_WRITE_BYTE(PCLSR, 0x8); /* set PCI cache line size */ + + /* + * Note that although this bit is cleared after a hard reset, it + * must be explicitly set and then cleared by software during + * initialization in order to guarantee correct operation of the + * DLL and the SDRAM_CLK[0:3] signals (if they are used). + */ + CONFIG_READ_BYTE (AMBOR, val); + CONFIG_WRITE_BYTE(AMBOR, val & 0xDF); + CONFIG_WRITE_BYTE(AMBOR, val | 0x20); + CONFIG_WRITE_BYTE(AMBOR, val & 0xDF); +#ifdef CONFIG_MPC8245 + /* silicon bug 28 MPC8245 */ + CONFIG_READ_BYTE(AMBOR,val); + CONFIG_WRITE_BYTE(AMBOR,val|0x1); + + CONFIG_READ_BYTE(PCMBCR,val); + /* in order not to corrupt data which is being read over the PCI bus + * with the PPC as master, we need to reduce the number of PCMRBs to 1, + * 4.11 in the processor user manual + * */ - /* - * Note that although this bit is cleared after a hard reset, it - * must be explicitly set and then cleared by software during - * initialization in order to guarantee correct operation of the - * DLL and the SDRAM_CLK[0:3] signals (if they are used). - */ - CONFIG_READ_BYTE (AMBOR, val); - CONFIG_WRITE_BYTE(AMBOR, val & 0xDF); - CONFIG_WRITE_BYTE(AMBOR, val | 0x20); - CONFIG_WRITE_BYTE(AMBOR, val & 0xDF); +#if 1 + CONFIG_WRITE_BYTE(PCMBCR,(val|0xC0)); /* 1 PCMRB */ +#else + CONFIG_WRITE_BYTE(PCMBCR,(val|0x80)); /* 2 PCMRBs */ + CONFIG_WRITE_BYTE(PCMBCR,(val|0x40)); /* 3 PCMRBs */ +#endif +#endif - CONFIG_READ_WORD(PICR1, val); + CONFIG_READ_WORD(PICR1, val); #if defined(CONFIG_MPC8240) - CONFIG_WRITE_WORD( PICR1, - (val & (PICR1_ADDRESS_MAP | PICR1_RCS0)) | - PIRC1_MSK | PICR1_PROC_TYPE_603E | - PICR1_FLASH_WR_EN | PICR1_MCP_EN | - PICR1_CF_DPARK | PICR1_EN_PCS | - PICR1_CF_APARK ); + CONFIG_WRITE_WORD( PICR1, + (val & (PICR1_ADDRESS_MAP | PICR1_RCS0)) | + PIRC1_MSK | PICR1_PROC_TYPE_603E | + PICR1_FLASH_WR_EN | PICR1_MCP_EN | + PICR1_CF_DPARK | PICR1_EN_PCS | + PICR1_CF_APARK ); #elif defined(CONFIG_MPC8245) - CONFIG_WRITE_WORD( PICR1, - (val & (PICR1_RCS0)) | - PICR1_PROC_TYPE_603E | - PICR1_FLASH_WR_EN | PICR1_MCP_EN | - PICR1_CF_DPARK | PICR1_NO_BUSW_CK | - PICR1_DEC| PICR1_CF_APARK | 0x10); /* 8245 UM says bit 4 must be set */ + CONFIG_WRITE_WORD( PICR1, + (val & (PICR1_RCS0)) | + PICR1_PROC_TYPE_603E | + PICR1_FLASH_WR_EN | PICR1_MCP_EN | + PICR1_CF_DPARK | PICR1_NO_BUSW_CK | + PICR1_DEC| PICR1_CF_APARK | 0x10); /* 8245 UM says bit 4 must be set */ #else #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) #endif - CONFIG_READ_WORD(PICR2, val); - val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/ + CONFIG_READ_WORD(PICR2, val); + val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/ #ifndef CONFIG_PN62 - val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/ + val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/ #endif - CONFIG_WRITE_WORD(PICR2, val); + CONFIG_WRITE_WORD(PICR2, val); - CONFIG_WRITE_WORD(EUMBBAR, CFG_EUMB_ADDR); + CONFIG_WRITE_WORD(EUMBBAR, CFG_EUMB_ADDR); #ifndef CFG_RAMBOOT - CONFIG_WRITE_WORD(MCCR1, (CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) | + CONFIG_WRITE_WORD(MCCR1, (CFG_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CFG_BANK0_ROW) | (CFG_BANK1_ROW << MCCR1_BANK1ROW_SHIFT) | (CFG_BANK2_ROW << MCCR1_BANK2ROW_SHIFT) | @@ -140,26 +157,26 @@ cpu_init_f (void) (CFG_BANK5_ROW << MCCR1_BANK5ROW_SHIFT) | (CFG_BANK6_ROW << MCCR1_BANK6ROW_SHIFT) | (CFG_BANK7_ROW << MCCR1_BANK7ROW_SHIFT) | - (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT)); + (CFG_ROMFAL << MCCR1_ROMFAL_SHIFT)); #endif #if defined(CFG_ASRISE) && defined(CFG_ASFALL) - CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT | - CFG_ASRISE << MCCR2_ASRISE_SHIFT | - CFG_ASFALL << MCCR2_ASFALL_SHIFT); + CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT | + CFG_ASRISE << MCCR2_ASRISE_SHIFT | + CFG_ASFALL << MCCR2_ASFALL_SHIFT); #else - CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT); + CONFIG_WRITE_WORD(MCCR2, CFG_REFINT << MCCR2_REFINT_SHIFT); #endif #if defined(CONFIG_MPC8240) - CONFIG_WRITE_WORD(MCCR3, - (((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) | - (CFG_REFREC << MCCR3_REFREC_SHIFT) | - (CFG_RDLAT << MCCR3_RDLAT_SHIFT)); + CONFIG_WRITE_WORD(MCCR3, + (((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) | + (CFG_REFREC << MCCR3_REFREC_SHIFT) | + (CFG_RDLAT << MCCR3_RDLAT_SHIFT)); #elif defined(CONFIG_MPC8245) - CONFIG_WRITE_WORD(MCCR3, - (((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) | - (CFG_REFREC << MCCR3_REFREC_SHIFT)); + CONFIG_WRITE_WORD(MCCR3, + (((CFG_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) | + (CFG_REFREC << MCCR3_REFREC_SHIFT)); #else #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) #endif @@ -190,67 +207,67 @@ cpu_init_f (void) (CFG_SDMODE_BURSTLEN)) <<MCCR4_SDMODE_SHIFT) | (((CFG_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT )); #elif defined(CONFIG_MPC8245) - CONFIG_READ_WORD(MCCR1, val); - val &= MCCR1_DBUS_SIZE0; /* test for 64-bit mem bus */ + CONFIG_READ_WORD(MCCR1, val); + val &= MCCR1_DBUS_SIZE0; /* test for 64-bit mem bus */ - CONFIG_WRITE_WORD(MCCR4, - (CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) | - (CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | - (CFG_EXTROM ? MCCR4_EXTROM : 0) | - (CFG_REGDIMM ? MCCR4_REGDIMM : 0) | - (CFG_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) | - ((CFG_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) | - (CFG_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) | - (((CFG_SDMODE_CAS_LAT <<4) | (CFG_SDMODE_WRAP <<3) | - (val ? 2 : 3)) << MCCR4_SDMODE_SHIFT) | - (CFG_ACTORW << MCCR4_ACTTORW_SHIFT) | - (((CFG_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT )); + CONFIG_WRITE_WORD(MCCR4, + (CFG_PRETOACT << MCCR4_PRETOACT_SHIFT) | + (CFG_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | + (CFG_EXTROM ? MCCR4_EXTROM : 0) | + (CFG_REGDIMM ? MCCR4_REGDIMM : 0) | + (CFG_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) | + ((CFG_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) | + (CFG_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) | + (((CFG_SDMODE_CAS_LAT <<4) | (CFG_SDMODE_WRAP <<3) | + (val ? 2 : 3)) << MCCR4_SDMODE_SHIFT) | + (CFG_ACTORW << MCCR4_ACTTORW_SHIFT) | + (((CFG_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT )); #else #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) #endif - CONFIG_WRITE_WORD(MSAR1, - ( (CFG_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | - (((CFG_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | - (((CFG_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | - (((CFG_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); - CONFIG_WRITE_WORD(EMSAR1, - ( (CFG_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | - (((CFG_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | - (((CFG_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | - (((CFG_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); - CONFIG_WRITE_WORD(MSAR2, - ( (CFG_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | - (((CFG_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | - (((CFG_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | - (((CFG_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); - CONFIG_WRITE_WORD(EMSAR2, - ( (CFG_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | - (((CFG_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | - (((CFG_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | - (((CFG_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); - CONFIG_WRITE_WORD(MEAR1, - ( (CFG_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | - (((CFG_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | - (((CFG_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | - (((CFG_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); - CONFIG_WRITE_WORD(EMEAR1, - ( (CFG_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | - (((CFG_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | - (((CFG_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | - (((CFG_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); - CONFIG_WRITE_WORD(MEAR2, - ( (CFG_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | - (((CFG_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | - (((CFG_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | - (((CFG_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); - CONFIG_WRITE_WORD(EMEAR2, - ( (CFG_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | - (((CFG_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | - (((CFG_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | - (((CFG_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); - - CONFIG_WRITE_BYTE(ODCR, CFG_ODCR); + CONFIG_WRITE_WORD(MSAR1, + ( (CFG_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | + (((CFG_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | + (((CFG_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | + (((CFG_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(EMSAR1, + ( (CFG_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | + (((CFG_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | + (((CFG_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | + (((CFG_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(MSAR2, + ( (CFG_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | + (((CFG_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | + (((CFG_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | + (((CFG_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(EMSAR2, + ( (CFG_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | + (((CFG_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | + (((CFG_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | + (((CFG_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(MEAR1, + ( (CFG_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | + (((CFG_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | + (((CFG_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | + (((CFG_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(EMEAR1, + ( (CFG_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | + (((CFG_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | + (((CFG_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | + (((CFG_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(MEAR2, + ( (CFG_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) | + (((CFG_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | + (((CFG_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | + (((CFG_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)); + CONFIG_WRITE_WORD(EMEAR2, + ( (CFG_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) | + (((CFG_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | + (((CFG_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | + (((CFG_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)); + + CONFIG_WRITE_BYTE(ODCR, CFG_ODCR); #ifdef CFG_DLL_MAX_DELAY CONFIG_WRITE_BYTE(MIOCR1, CFG_DLL_MAX_DELAY); /* needed to make DLL lock */ #endif @@ -261,31 +278,31 @@ cpu_init_f (void) CONFIG_WRITE_BYTE(MIOCR2, CFG_SDRAM_DSCD); /* change memory input */ #endif /* setup & hold time */ - CONFIG_WRITE_BYTE(MBER, - CFG_BANK0_ENABLE | - (CFG_BANK1_ENABLE << 1) | - (CFG_BANK2_ENABLE << 2) | - (CFG_BANK3_ENABLE << 3) | - (CFG_BANK4_ENABLE << 4) | - (CFG_BANK5_ENABLE << 5) | - (CFG_BANK6_ENABLE << 6) | - (CFG_BANK7_ENABLE << 7)); + CONFIG_WRITE_BYTE(MBER, + CFG_BANK0_ENABLE | + (CFG_BANK1_ENABLE << 1) | + (CFG_BANK2_ENABLE << 2) | + (CFG_BANK3_ENABLE << 3) | + (CFG_BANK4_ENABLE << 4) | + (CFG_BANK5_ENABLE << 5) | + (CFG_BANK6_ENABLE << 6) | + (CFG_BANK7_ENABLE << 7)); #ifdef CFG_PGMAX - CONFIG_WRITE_BYTE(MPMR, CFG_PGMAX); + CONFIG_WRITE_BYTE(MPMR, CFG_PGMAX); #endif - /* ! Wait 200us before initialize other registers */ - /*FIXME: write a decent udelay wait */ - __asm__ __volatile__( - " mtctr %0 \n \ - 0: bdnz 0b\n" - : - : "r" (0x10000)); + /* ! Wait 200us before initialize other registers */ + /*FIXME: write a decent udelay wait */ + __asm__ __volatile__( + " mtctr %0 \n \ + 0: bdnz 0b\n" + : + : "r" (0x10000)); - CONFIG_READ_WORD(MCCR1, val); - CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */ - __asm__ __volatile__("eieio"); + CONFIG_READ_WORD(MCCR1, val); + CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */ + __asm__ __volatile__("eieio"); #endif /* !CONFIG_MOUSSE && !CONFIG_BMW */ } @@ -293,32 +310,32 @@ cpu_init_f (void) #ifdef CONFIG_MOUSSE #ifdef INCLUDE_MPC107_REPORT -struct MPC107_s{ - unsigned int iobase; - char desc[120]; -} MPC107Regs[] ={ - {BMC_BASE+0x0, "MPC107 Vendor/Device ID"}, - {BMC_BASE+0x4, "MPC107 PCI Command/Status Register"}, - {BMC_BASE+0x8, "MPC107 Revision"}, - {BMC_BASE+0xC, "MPC107 Cache Line Size"}, - {BMC_BASE+0x10, "MPC107 LMBAR"}, - {BMC_BASE+0x14, "MPC824x PCSR"}, - {BMC_BASE+0xA8, "MPC824x PICR1"}, - {BMC_BASE+0xAC, "MPC824x PICR2"}, - {BMC_BASE+0x46, "MPC824x PACR"}, - {BMC_BASE+0x310, "MPC824x ITWR"}, - {BMC_BASE+0x300, "MPC824x OMBAR"}, - {BMC_BASE+0x308, "MPC824x OTWR"}, - {BMC_BASE+0x14, "MPC107 Peripheral Control and Status Register"}, - {BMC_BASE+0x78, "MPC107 EUMBAR"}, - {BMC_BASE+0xC0, "MPC107 Processor Bus Error Status"}, - {BMC_BASE+0xC4, "MPC107 PCI Bus Error Status"}, - {BMC_BASE+0xC8, "MPC107 Processor/PCI Error Address"}, - {BMC_BASE+0xE0, "MPC107 AMBOR Register"}, - {BMC_BASE+0xF0, "MPC107 MCCR1 Register"}, - {BMC_BASE+0xF4, "MPC107 MCCR2 Register"}, - {BMC_BASE+0xF8, "MPC107 MCCR3 Register"}, - {BMC_BASE+0xFC, "MPC107 MCCR4 Register"} +struct MPC107_s { + unsigned int iobase; + char desc[120]; +} MPC107Regs[] = { + { BMC_BASE + 0x00, "MPC107 Vendor/Device ID" }, + { BMC_BASE + 0x04, "MPC107 PCI Command/Status Register" }, + { BMC_BASE + 0x08, "MPC107 Revision" }, + { BMC_BASE + 0x0C, "MPC107 Cache Line Size" }, + { BMC_BASE + 0x10, "MPC107 LMBAR" }, + { BMC_BASE + 0x14, "MPC824x PCSR" }, + { BMC_BASE + 0xA8, "MPC824x PICR1" }, + { BMC_BASE + 0xAC, "MPC824x PICR2" }, + { BMC_BASE + 0x46, "MPC824x PACR" }, + { BMC_BASE + 0x310, "MPC824x ITWR" }, + { BMC_BASE + 0x300, "MPC824x OMBAR" }, + { BMC_BASE + 0x308, "MPC824x OTWR" }, + { BMC_BASE + 0x14, "MPC107 Peripheral Control and Status Register" }, + { BMC_BASE + 0x78, "MPC107 EUMBAR" }, + { BMC_BASE + 0xC0, "MPC107 Processor Bus Error Status" }, + { BMC_BASE + 0xC4, "MPC107 PCI Bus Error Status" }, + { BMC_BASE + 0xC8, "MPC107 Processor/PCI Error Address" }, + { BMC_BASE + 0xE0, "MPC107 AMBOR Register" }, + { BMC_BASE + 0xF0, "MPC107 MCCR1 Register" }, + { BMC_BASE + 0xF4, "MPC107 MCCR2 Register" }, + { BMC_BASE + 0xF8, "MPC107 MCCR3 Register" }, + { BMC_BASE + 0xFC, "MPC107 MCCR4 Register" }, }; #define N_MPC107_Regs (sizeof(MPC107Regs)/sizeof(MPC107Regs[0])) #endif /* INCLUDE_MPC107_REPORT */ diff --git a/drivers/Makefile b/drivers/Makefile index 0d1860e..11738b9 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -31,14 +31,15 @@ OBJS = 3c589.o 5701rls.o ali512x.o \ bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \ cs8900.o ct69000.o dataflash.o dc2114x.o \ e1000.o eepro100.o \ - i8042.o i82365.o inca-ip_sw.o \ + i8042.o i82365.o inca-ip_sw.o keyboard.o \ lan91c96.o natsemi.o netarm_eth.o \ ns16550.o ns8382x.o ns87308.o \ pci.o pci_auto.o pci_indirect.o \ pcnet.o plb2800_eth.o \ - ps2ser.o ps2mult.o pc_keyb.o keyboard.o \ + ps2ser.o ps2mult.o pc_keyb.o \ rtl8019.o rtl8139.o rtl8169.o \ - s3c24x0_i2c.o sed13806.o sed156x.o \ + s3c24x0_i2c.o s3c4510b_eth.o s3c4510b_uart.o \ + sed13806.o sed156x.o \ serial.o serial_max3100.o serial_pl010.o serial_pl011.o \ serial_xuartlite.o sl811_usb.o \ smc91111.o smiLynxEM.o status_led.o sym53c8xx.o \ diff --git a/drivers/lan91c96.c b/drivers/lan91c96.c index c3b715c..bb03dae 100644 --- a/drivers/lan91c96.c +++ b/drivers/lan91c96.c @@ -139,7 +139,9 @@ extern int eth_init (bd_t * bd); extern void eth_halt (void); extern int eth_rx (void); extern int eth_send (volatile void *packet, int length); +#if 0 static int smc_hw_init (void); +#endif /* * This is called by register_netdev(). It is responsible for @@ -817,6 +819,7 @@ int eth_send (volatile void *packet, int length) } +#if 0 /*------------------------------------------------------------------------- * smc_hw_init() * @@ -860,6 +863,7 @@ static int smc_hw_init () } return 0; } +#endif /* 0 */ #endif /* COMMANDS & CFG_NET */ diff --git a/drivers/pcnet.c b/drivers/pcnet.c index 1ba7d81..17e8044 100644 --- a/drivers/pcnet.c +++ b/drivers/pcnet.c @@ -34,15 +34,15 @@ #endif #if PCNET_DEBUG_LEVEL > 0 -#define DEBUG1(fmt,args...) printf (fmt ,##args) +#define PCNET_DEBUG1(fmt,args...) printf (fmt ,##args) #if PCNET_DEBUG_LEVEL > 1 -#define DEBUG2(fmt,args...) printf (fmt ,##args) +#define PCNET_DEBUG2(fmt,args...) printf (fmt ,##args) #else -#define DEBUG2(fmt,args...) +#define PCNET_DEBUG2(fmt,args...) #endif #else -#define DEBUG1(fmt,args...) -#define DEBUG2(fmt,args...) +#define PCNET_DEBUG1(fmt,args...) +#define PCNET_DEBUG2(fmt,args...) #endif #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \ @@ -174,7 +174,7 @@ int pcnet_initialize(bd_t *bis) u16 command, status; int dev_nr = 0; - DEBUG1("\npcnet_initialize...\n"); + PCNET_DEBUG1("\npcnet_initialize...\n"); for (dev_nr = 0; ; dev_nr++) { @@ -198,7 +198,7 @@ int pcnet_initialize(bd_t *bis) pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &dev->iobase); dev->iobase &= ~0xf; - DEBUG1("%s: devbusfn=0x%x iobase=0x%x: ", + PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%x: ", dev->name, devbusfn, dev->iobase); command = PCI_COMMAND_IO | PCI_COMMAND_MASTER; @@ -276,7 +276,7 @@ static int pcnet_probe(struct eth_device* dev, bd_t *bis, int dev_nr) return -1; } - DEBUG1("AMD %s\n", chipname); + PCNET_DEBUG1("AMD %s\n", chipname); #ifdef PCNET_HAS_PROM /* @@ -301,7 +301,7 @@ static int pcnet_init(struct eth_device* dev, bd_t *bis) int i, val; u32 addr; - DEBUG1("%s: pcnet_init...\n", dev->name); + PCNET_DEBUG1("%s: pcnet_init...\n", dev->name); /* Switch pcnet to 32bit mode */ pcnet_write_bcr (dev, 20, 2); @@ -349,7 +349,7 @@ static int pcnet_init(struct eth_device* dev, bd_t *bis) lp->rx_ring[i].base = PCI_TO_MEM_LE(dev, lp->rx_buf[i]); lp->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ); lp->rx_ring[i].status = cpu_to_le16(0x8000); - DEBUG1("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n", + PCNET_DEBUG1("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n", i, lp->rx_ring[i].base, lp->rx_ring[i].buf_length, lp->rx_ring[i].status); } @@ -367,11 +367,11 @@ static int pcnet_init(struct eth_device* dev, bd_t *bis) /* * Setup Init Block. */ - DEBUG1("Init block at 0x%p: MAC", &lp->init_block); + PCNET_DEBUG1("Init block at 0x%p: MAC", &lp->init_block); for (i = 0; i < 6; i++) { lp->init_block.phys_addr[i] = dev->enetaddr[i]; - DEBUG1(" %02x", lp->init_block.phys_addr[i]); + PCNET_DEBUG1(" %02x", lp->init_block.phys_addr[i]); } lp->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS | @@ -379,7 +379,7 @@ static int pcnet_init(struct eth_device* dev, bd_t *bis) lp->init_block.rx_ring = PCI_TO_MEM_LE(dev, lp->rx_ring); lp->init_block.tx_ring = PCI_TO_MEM_LE(dev, lp->tx_ring); - DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n", + PCNET_DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n", lp->init_block.tlen_rlen, lp->init_block.rx_ring, lp->init_block.tx_ring); @@ -418,7 +418,7 @@ static int pcnet_send(struct eth_device* dev, volatile void *packet, int pkt_len int i, status; struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx]; - DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len, packet); + PCNET_DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len, packet); /* Wait for completion by testing the OWN bit */ for (i = 1000; i > 0; i--) { @@ -426,7 +426,7 @@ static int pcnet_send(struct eth_device* dev, volatile void *packet, int pkt_len if ((status & 0x8000) == 0) break; udelay(100); - DEBUG2("."); + PCNET_DEBUG2("."); } if (i <= 0) { printf("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n", @@ -452,7 +452,7 @@ static int pcnet_send(struct eth_device* dev, volatile void *packet, int pkt_len if (++lp->cur_tx >= TX_RING_SIZE) lp->cur_tx = 0; - DEBUG2("done\n"); + PCNET_DEBUG2("done\n"); return pkt_len; } @@ -475,7 +475,7 @@ static int pcnet_recv(struct eth_device* dev) if (status != 0x03) { /* There was an error. */ printf("%s: Rx%d", dev->name, lp->cur_rx); - DEBUG1(" (status=0x%x)", status); + PCNET_DEBUG1(" (status=0x%x)", status); if (status & 0x20) printf(" Frame"); if (status & 0x10) printf(" Overflow"); if (status & 0x08) printf(" CRC"); @@ -491,7 +491,7 @@ static int pcnet_recv(struct eth_device* dev) dev->name, lp->cur_rx, pkt_len); } else { NetReceive(lp->rx_buf[lp->cur_rx], pkt_len); - DEBUG2("Rx%d: %d bytes from 0x%p\n", + PCNET_DEBUG2("Rx%d: %d bytes from 0x%p\n", lp->cur_rx, pkt_len, lp->rx_buf[lp->cur_rx]); } } @@ -507,7 +507,7 @@ static void pcnet_halt(struct eth_device* dev) { int i; - DEBUG1("%s: pcnet_halt...\n", dev->name); + PCNET_DEBUG1("%s: pcnet_halt...\n", dev->name); /* Reset the PCnet controller */ pcnet_reset (dev); diff --git a/drivers/s3c4510b_eth.c b/drivers/s3c4510b_eth.c new file mode 100644 index 0000000..694703c --- /dev/null +++ b/drivers/s3c4510b_eth.c @@ -0,0 +1,246 @@ +/*********************************************************************** + * + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Description: Ethernet interface for Samsung S3C4510B SoC + */ + +#include <common.h> + +#ifdef CONFIG_DRIVER_S3C4510_ETH + +#include <command.h> +#include <net.h> +#include <asm/hardware.h> +#include "s3c4510b_eth.h" + +static TX_FrameDescriptor txFDbase[ETH_MaxTxFrames]; +static MACFrame txFrameBase[ETH_MaxTxFrames]; +static RX_FrameDescriptor rxFDbase[PKTBUFSRX]; +static ETH m_eth; + +static s32 TxFDinit( ETH *eth) { + + s32 i; + MACFrame *txFrmBase; + + /* disable cache for access to the TX buffers */ + txFrmBase = (MACFrame *)( (u32)txFrameBase | CACHE_DISABLE_MASK); + + /* store start of Tx descriptors and set current */ + eth->m_curTX_FD = (TX_FrameDescriptor *) ((u32)txFDbase | CACHE_DISABLE_MASK); + eth->m_baseTX_FD = eth->m_curTX_FD; + + for ( i = 0; i < ETH_MaxTxFrames; i++) { + eth->m_baseTX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)&txFrmBase[i]; + eth->m_baseTX_FD[i].m_frameDataPtr.bf.owner = 0x0; /* CPU owner */ + eth->m_baseTX_FD[i].m_opt.ui = 0x0; + eth->m_baseTX_FD[i].m_status.ui = 0x0; + eth->m_baseTX_FD[i].m_nextFD = ð->m_baseTX_FD[i+1]; + } + + /* make the list circular */ + eth->m_baseTX_FD[i-1].m_nextFD = ð->m_baseTX_FD[0]; + + PUT_REG( REG_BDMATXPTR, (u32)eth->m_curTX_FD); + + return 0; +} + +static s32 RxFDinit( ETH *eth) { + + s32 i; + /* MACFrame *rxFrmBase; */ + + /* disable cache for access to the RX buffers */ + /* rxFrmBase = (MACFrame *)( (u32)rxFrameBase | CACHE_DISABLE_MASK); */ + + /* store start of Rx descriptors and set current */ + eth->m_curRX_FD = (RX_FrameDescriptor *)((u32)rxFDbase | CACHE_DISABLE_MASK); + eth->m_baseRX_FD = eth->m_curRX_FD; + for ( i = 0; i < PKTBUFSRX; i++) { + eth->m_baseRX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)NetRxPackets[i] | CACHE_DISABLE_MASK; + eth->m_baseRX_FD[i].m_frameDataPtr.bf.owner = 0x1; /* BDMA owner */ + eth->m_baseRX_FD[i].m_reserved = 0x0; + eth->m_baseRX_FD[i].m_status.ui = 0x0; + eth->m_baseRX_FD[i].m_nextFD = ð->m_baseRX_FD[i+1]; + } + + /* make the list circular */ + eth->m_baseRX_FD[i-1].m_nextFD = ð->m_baseRX_FD[0]; + + PUT_REG( REG_BDMARXPTR, (u32)eth->m_curRX_FD); + + return 0; +} + +/* + * Public u-boot interface functions below + */ + +int eth_init(bd_t *bis) +{ + + ETH *eth = &m_eth; + + /* store our MAC address */ + eth->m_mac = bis->bi_enetaddr; + + /* setup DBMA and MAC */ + PUT_REG( REG_BDMARXCON, ETH_BRxRS); /* reset BDMA RX machine */ + PUT_REG( REG_BDMATXCON, ETH_BTxRS); /* reset BDMA TX machine */ + PUT_REG( REG_MACCON , ETH_SwReset); /* reset MAC machine */ + PUT_REG( REG_BDMARXLSZ, sizeof(MACFrame)); + PUT_REG( REG_MACCON , 0); /* reset MAC machine */ + + /* init frame descriptors */ + TxFDinit( eth); + RxFDinit( eth); + + /* init the CAM with our MAC address */ + PUT_REG( REG_CAM_BASE, (eth->m_mac[0] << 24) | + (eth->m_mac[1] << 16) | + (eth->m_mac[2] << 8) | + (eth->m_mac[3])); + PUT_REG( REG_CAM_BASE + 0x4, (eth->m_mac[4] << 24) | + (eth->m_mac[5] << 16)); + + /* enable CAM address 1 -- the MAC we just loaded */ + PUT_REG( REG_CAMEN, 0x1); + + PUT_REG( REG_CAMCON, + ETH_BroadAcc | /* accept broadcast packetes */ + ETH_CompEn); /* enable compare mode (check against the CAM) */ + + /* configure the BDMA Transmitter control */ + PUT_REG( REG_BDMATXCON, + ETH_BTxBRST | /* BDMA Tx burst size 16 words */ + ETH_BTxMSL110 | /* BDMA Tx wait to fill 6/8 of the BDMA */ + ETH_BTxSTSKO | /* BDMA Tx interrupt(Stop) on non-owner TX FD */ + ETH_BTxEn); /* BDMA Tx Enable */ + + /* configure the MAC Transmitter control */ + PUT_REG( REG_MACTXCON, + ETH_EnComp | /* interrupt when the MAC transmits or discards packet */ + ETH_TxEn); /* MAC transmit enable */ + + /* configure the BDMA Receiver control */ + PUT_REG( REG_BDMARXCON, + ETH_BRxBRST | /* BDMA Rx Burst Size 16 words */ + ETH_BRxSTSKO | /* BDMA Rx interrupt(Stop) on non-owner RX FD */ + ETH_BRxMAINC | /* BDMA Rx Memory Address increment */ + ETH_BRxDIE | /* BDMA Rx Every Received Frame Interrupt Enable */ + ETH_BRxNLIE | /* BDMA Rx NULL List Interrupt Enable */ + ETH_BRxNOIE | /* BDMA Rx Not Owner Interrupt Enable */ + ETH_BRxLittle | /* BDMA Rx Little endian */ + ETH_BRxEn); /* BDMA Rx Enable */ + + /* configure the MAC Receiver control */ + PUT_REG( REG_MACRXCON, + ETH_RxEn); /* MAC ETH_RxEn */ + + return 0; + +} + +/* Send a packet */ +s32 eth_send(volatile void *packet, s32 length) +{ + + u32 i; + ETH *eth = &m_eth; + + if ( eth->m_curTX_FD->m_frameDataPtr.bf.owner) { + printf(__FUNCTION__"(): TX Frame. CPU not owner.\n"); + return -1; + } + + /* copy user data into frame data pointer */ + memcpy((void *)eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr, + (void *)packet, + length); + + /* Set TX Frame flags */ + eth->m_curTX_FD->m_opt.bf.widgetAlign = 0; + eth->m_curTX_FD->m_opt.bf.frameDataDir = 1; + eth->m_curTX_FD->m_opt.bf.littleEndian = 1; + eth->m_curTX_FD->m_opt.bf.macTxIrqEnbl = 1; + eth->m_curTX_FD->m_opt.bf.no_crc = 0; + eth->m_curTX_FD->m_opt.bf.no_padding = 0; + + /* Set TX Frame length */ + eth->m_curTX_FD->m_status.bf.len = length; + + /* Change ownership to BDMA */ + eth->m_curTX_FD->m_frameDataPtr.bf.owner = 1; + + /* Enable MAC and BDMA Tx control register */ + SET_REG( REG_BDMATXCON, ETH_BTxEn); + SET_REG( REG_MACTXCON, ETH_TxEn); + + /* poll on TX completion status */ + while ( !eth->m_curTX_FD->m_status.bf.complete) { + /* sleep */ + for ( i = 0; i < 0x10000; i ++); + } + + /* Change the Tx frame descriptor for next use */ + eth->m_curTX_FD = eth->m_curTX_FD->m_nextFD; + + return 0; +} + +/* Check for received packets */ +s32 eth_rx (void) +{ + s32 nLen = 0; + ETH *eth = &m_eth; + + /* check if packet ready */ + if ( (GET_REG( REG_BDMASTAT)) & ETH_S_BRxRDF) { + /* process all waiting packets */ + while ( !eth->m_curRX_FD->m_frameDataPtr.bf.owner) { + nLen = eth->m_curRX_FD->m_status.bf.len; + /* call back u-boot -- may call eth_send() */ + NetReceive ((u8 *)eth->m_curRX_FD->m_frameDataPtr.ui, nLen); + /* set owner back to CPU */ + eth->m_curRX_FD->m_frameDataPtr.bf.owner = 1; + /* clear status */ + eth->m_curRX_FD->m_status.ui = 0x0; + /* advance to next descriptor */ + eth->m_curRX_FD = eth->m_curRX_FD->m_nextFD; + /* clear received frame bit */ + PUT_REG( REG_BDMASTAT, ETH_S_BRxRDF); + } + } + + return nLen; +} + +/* Halt ethernet engine */ +void eth_halt(void) +{ + /* disable MAC */ + PUT_REG( REG_MACCON, ETH_HaltReg); +} + +#endif diff --git a/drivers/s3c4510b_eth.h b/drivers/s3c4510b_eth.h new file mode 100644 index 0000000..cbddba7 --- /dev/null +++ b/drivers/s3c4510b_eth.h @@ -0,0 +1,302 @@ +#ifndef __S3C4510B_ETH_H +#define __S3C4510B_ETH_H +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * MODULE: $Id:$ + * Description: Ethernet interface + * Runtime Env: ARM7TDMI + * Change History: + * 03-02-04 Create (Curt Brune) curt@cucy.com + * + */ + +#define __packed __attribute__ ((packed)) + +#define ETH_MAC_ADDR_SIZE (6) /* dst,src addr is 6bytes each */ +#define ETH_MaxTxFrames (16) /* Max number of Tx Frames */ + +/* Buffered DMA Receiver Control Register */ +#define ETH_BRxBRST 0x0000F /* BDMA Rx Burst Size * BRxBRST */ + /* = Burst Data Size 16 */ +#define ETH_BRxSTSKO 0x00020 /* BDMA Rx Stop/Skip Frame or Interrupt(=1) */ + /* case of not OWNER the current Frame */ +#define ETH_BRxMAINC 0x00040 /* BDMA Rx Memory Address Inc/Dec */ +#define ETH_BRxDIE 0x00080 /* BDMA Rx Every Received Frame Interrupt Enable */ +#define ETH_BRxNLIE 0x00100 /* BDMA Rx NULL List Interrupt Enable */ +#define ETH_BRxNOIE 0x00200 /* BDMA Rx Not Owner Interrupt Enable */ +#define ETH_BRxMSOIE 0x00400 /* BDMA Rx Maximum Size over Interrupr Enable */ +#define ETH_BRxLittle 0x00800 /* BDMA Rx Big/Little Endian */ +#define ETH_BRxBig 0x00000 /* BDMA Rx Big/Little Endian */ +#define ETH_BRxWA01 0x01000 /* BDMA Rx Word Alignment- one invalid byte */ +#define ETH_BRxWA10 0x02000 /* BDMA Rx Word Alignment- two invalid byte */ +#define ETH_BRxWA11 0x03000 /* BDMA Rx Word Alignment- three invalid byte */ +#define ETH_BRxEn 0x04000 /* BDMA Rx Enable */ +#define ETH_BRxRS 0x08000 /* BDMA Rx Reset */ +#define ETH_RxEmpty 0x10000 /* BDMA Rx Buffer empty interrupt */ +#define ETH_BRxEarly 0x20000 /* BDMA Rx Early notify Interrupt */ + +/* Buffered DMA Trasmit Control Register(BDMATXCON) */ +#define ETH_BTxBRST 0x0000F /* BDMA Tx Burst Size = 16 */ +#define ETH_BTxSTSKO 0x00020 /* BDMA Tx Stop/Skip Frame or Interrupt in case */ + /* of not Owner the current frame */ +#define ETH_BTxCPIE 0x00080 /* BDMA Tx Complete to send control */ + /* packet Enable */ +#define ETH_BTxNOIE 0x00200 /* BDMA Tx Buffer Not Owner */ +#define ETH_BTxEmpty 0x00400 /* BDMA Tx Buffer Empty Interrupt */ + +/* BDMA Tx buffer can be moved to the MAC Tx IO when the new frame comes in. */ +#define ETH_BTxMSL000 0x00000 /* No wait to fill the BDMA */ +#define ETH_BTxMSL001 0x00800 /* wait to fill 1/8 of the BDMA */ +#define ETH_BTxMSL010 0x01000 /* wait to fill 2/8 of the BDMA */ +#define ETH_BTxMSL011 0x01800 /* wait to fill 3/8 of the BDMA */ +#define ETH_BTxMSL100 0x02000 /* wait to fill 4/8 of the BDMA */ +#define ETH_BTxMSL101 0x02800 /* wait to fill 5/8 of the BDMA */ +#define ETH_BTxMSL110 0x03000 /* wait to fill 6/8 of the BDMA */ +#define ETH_BTxMSL111 0x03800 /* wait to fill 7/8 of the BDMA */ +#define ETH_BTxEn 0x04000 /* BDMA Tx Enable */ +#define ETH_BTxRS 0x08000 /* BDMA Tx Reset */ + +/* BDMA Status Register */ +#define ETH_S_BRxRDF 0x00001 /* BDMA Rx Done Every Received Frame */ +#define ETH_S_BRxNL 0x00002 /* BDMA Rx NULL List */ +#define ETH_S_BRxNO 0x00004 /* BDMA Rx Not Owner */ +#define ETH_S_BRxMSO 0x00008 /* BDMA Rx Maximum Size Over */ +#define ETH_S_BRxEmpty 0x00010 /* BDMA Rx Buffer Empty */ +#define ETH_S_BRxSEarly 0x00020 /* Early Notify */ +#define ETH_S_BRxFRF 0x00080 /* One more frame data in BDMA receive buffer */ +#define ETH_S_BTxCCP 0x10000 /* BDMA Tx Complete to send Control Packet */ +#define ETH_S_BTxNL 0x20000 /* BDMA Tx Null List */ +#define ETH_S_BTxNO 0x40000 /* BDMA Tx Not Owner */ +#define ETH_S_BTxEmpty 0x100000 /* BDMA Tx Buffer Empty */ + +/* MAC Control Register */ +#define ETH_HaltReg 0x0001 /* stop transmission and reception */ + /* after completion of any current packets */ +#define ETH_HaltImm 0x0002 /* Stop transmission and reception immediately */ +#define ETH_SwReset 0x0004 /* reset all Ethernet controller state machines */ + /* and FIFOs */ +#define ETH_FullDup 0x0008 /* allow transmission to begin while reception */ + /* is occurring */ +#define ETH_MACLoop 0x0010 /* MAC loopback */ +#define ETH_ConnM00 0x0000 /* Automatic-default */ +#define ETH_ConnM01 0x0020 /* Force 10Mbits endec */ +#define ETH_ConnM10 0x0040 /* Force MII (rate determined by MII clock */ +#define ETH_MIIOFF 0x0040 /* Force MII (rate determined by MII clock */ +#define ETH_Loop10 0x0080 /* Loop 10Mbps */ +#define ETH_MissRoll 0x0400 /* Missed error counter rolled over */ +#define ETH_MDCOFF 0x1000 /* MII Station Management Clock Off */ +#define ETH_EnMissRoll 0x2000 /* Interrupt when missed error counter rolls */ + /* over */ +#define ETH_Link10 0x8000 /* Link status 10Mbps */ + +/* CAM control register(CAMCON) */ +#define ETH_StationAcc 0x0001 /* Accept any packet with a unicast station */ + /* address */ +#define ETH_GroupAcc 0x0002 /* Accept any packet with multicast-group */ + /* station address */ +#define ETH_BroadAcc 0x0004 /* Accept any packet with a broadcast station */ + /* address */ +#define ETH_NegCAM 0x0008 /* 0: Accept packets CAM recognizes, */ + /* reject others */ + /* 1: reject packets CAM recognizes, */ + /* accept others */ +#define ETH_CompEn 0x0010 /* Compare Enable mode */ + +/* Transmit Control Register(MACTXCON) */ +#define ETH_TxEn 0x0001 /* transmit Enable */ +#define ETH_TxHalt 0x0002 /* Transmit Halt Request */ +#define ETH_NoPad 0x0004 /* suppress Padding */ +#define ETH_NoCRC 0x0008 /* Suppress CRC */ +#define ETH_FBack 0x0010 /* Fast Back-off */ +#define ETH_NoDef 0x0020 /* Disable the defer counter */ +#define ETH_SdPause 0x0040 /* Send Pause */ +#define ETH_MII10En 0x0080 /* MII 10Mbps mode enable */ +#define ETH_EnUnder 0x0100 /* Enable Underrun */ +#define ETH_EnDefer 0x0200 /* Enable Deferral */ +#define ETH_EnNCarr 0x0400 /* Enable No Carrier */ +#define ETH_EnExColl 0x0800 /* interrupt if 16 collision occur */ + /* in the same packet */ +#define ETH_EnLateColl 0x1000 /* interrupt if collision occurs after */ + /* 512 bit times(64 bytes times) */ +#define ETH_EnTxPar 0x2000 /* interrupt if the MAC transmit FIFO */ + /* has a parity error */ +#define ETH_EnComp 0x4000 /* interrupt when the MAC transmits or */ + /* discards one packet */ + +/* Transmit Status Register(MACTXSTAT) */ +#define ETH_ExColl 0x0010 /* Excessive collision */ +#define ETH_TxDeffered 0x0020 /* set if 16 collisions occur for same packet */ +#define ETH_Paused 0x0040 /* packet waited because of pause during */ + /* transmission */ +#define ETH_IntTx 0x0080 /* set if transmission of packet causes an */ + /* interrupt condiftion */ +#define ETH_Under 0x0100 /* MAC transmit FIFO becomes empty during */ + /* transmission */ +#define ETH_Defer 0x0200 /* MAC defers for MAC deferral */ +#define ETH_NCarr 0x0400 /* No carrier sense detected during the */ + /* transmission of a packet */ +#define ETH_SQE 0x0800 /* Signal Quality Error */ +#define ETH_LateColl 0x1000 /* a collision occures after 512 bit times */ +#define ETH_TxPar 0x2000 /* MAC transmit FIFO has detected a parity error */ +#define ETH_Comp 0x4000 /* MAC transmit or discards one packet */ +#define ETH_TxHalted 0x8000 /* Transmission was halted by clearing */ + /* TxEn or Halt immedite */ + +/* Receive Control Register (MACRXCON) */ +#define ETH_RxEn 0x0001 +#define ETH_RxHalt 0x0002 +#define ETH_LongEn 0x0004 +#define ETH_ShortEn 0x0008 +#define ETH_StripCRC 0x0010 +#define ETH_PassCtl 0x0020 +#define ETH_IgnoreCRC 0x0040 +#define ETH_EnAlign 0x0100 +#define ETH_EnCRCErr 0x0200 +#define ETH_EnOver 0x0400 +#define ETH_EnLongErr 0x0800 +#define ETH_EnRxPar 0x2000 +#define ETH_EnGood 0x4000 + +/* Receive Status Register(MACRXSTAT) */ +#define ETH_MCtlRecd 0x0020 +#define ETH_MIntRx 0x0040 +#define ETH_MRx10Stat 0x0080 +#define ETH_MAllignErr 0x0100 +#define ETH_MCRCErr 0x0200 +#define ETH_MOverflow 0x0400 +#define ETH_MLongErr 0x0800 +#define ETH_MRxPar 0x2000 +#define ETH_MRxGood 0x4000 +#define ETH_MRxHalted 0x8000 + +/* type of ethernet packets */ +#define ETH_TYPE_ARP (0x0806) +#define ETH_TYPE_IP (0x0800) + +#define ETH_HDR_SIZE (14) + +/* bit field for frame data pointer word */ +typedef struct __BF_FrameDataPtr { + u32 dataPtr:31; + u32 owner: 1; +} BF_FrameDataPtr; + +typedef union _FrameDataPtr { + u32 ui; + BF_FrameDataPtr bf; +} FrameDataPtr; + +typedef struct __BF_TX_Options { + u32 no_padding: 1; + u32 no_crc: 1; + u32 macTxIrqEnbl: 1; + u32 littleEndian: 1; + u32 frameDataDir: 1; + u32 widgetAlign: 2; + u32 reserved:25; +} BF_TX_Options; + +typedef union _TX_Options { + u32 ui; + BF_TX_Options bf; +} TX_Options; + +typedef struct __BF_RX_Status { + u32 len:16; /* frame length */ + u32 reserved1: 3; + u32 overMax: 1; + u32 reserved2: 1; + u32 ctrlRcv: 1; + u32 intRx: 1; + u32 rx10stat: 1; + u32 alignErr: 1; + u32 crcErr: 1; + u32 overFlow: 1; + u32 longErr: 1; + u32 reserved3: 1; + u32 parityErr: 1; + u32 good: 1; + u32 halted: 1; +} BF_RX_Status; + +typedef union _RX_Status { + u32 ui; + BF_RX_Status bf; +} RX_Status; + +typedef struct __BF_TX_Status { + u32 len:16; /* frame length */ + u32 txCollCnt: 4; + u32 exColl: 1; + u32 txDefer: 1; + u32 paused: 1; + u32 intTx: 1; + u32 underRun: 1; + u32 defer: 1; + u32 noCarrier: 1; + u32 SQErr: 1; + u32 lateColl: 1; + u32 parityErr: 1; + u32 complete: 1; + u32 halted: 1; +} BF_TX_Status; + +typedef union _TX_Status { + u32 ui; + BF_TX_Status bf; +} TX_Status; + +/* TX descriptor structure */ +typedef struct __TX_FrameDescriptor { + volatile FrameDataPtr m_frameDataPtr; + TX_Options m_opt; + volatile TX_Status m_status; + struct __TX_FrameDescriptor *m_nextFD; +} TX_FrameDescriptor; + +/* RX descriptor structure */ +typedef struct __RX_FrameDescriptor { + volatile FrameDataPtr m_frameDataPtr; + u32 m_reserved; + volatile RX_Status m_status; + struct __RX_FrameDescriptor *m_nextFD; +} RX_FrameDescriptor; + +/* MAC Frame Structure */ +typedef struct __MACFrame { + u8 m_dstAddr[6] __packed; + u8 m_srcAddr[6] __packed; + u16 m_lengthOrType __packed; + u8 m_payload[1506] __packed; +} MACFrame; + +/* Ethernet Control block */ +typedef struct __ETH { + TX_FrameDescriptor *m_curTX_FD; /* pointer to current TX frame descriptor */ + TX_FrameDescriptor *m_baseTX_FD; /* pointer to base TX frame descriptor */ + RX_FrameDescriptor *m_curRX_FD; /* pointer to current RX frame descriptor */ + RX_FrameDescriptor *m_baseRX_FD; /* pointer to base RX frame descriptor */ + u8 *m_mac; /* pointer to our MAC address */ +} ETH; + +#endif diff --git a/drivers/s3c4510b_uart.c b/drivers/s3c4510b_uart.c new file mode 100644 index 0000000..44b96a9 --- /dev/null +++ b/drivers/s3c4510b_uart.c @@ -0,0 +1,216 @@ +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * (C) Copyright 2004 + * DAVE Srl + * http://www.dave-tech.it + * http://www.wawnet.biz + * mailto:info@wawnet.biz + * + * (C) Copyright 2002-2004 + * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Alex Zuepke <azu@sysgo.de> + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * MODULE: $Id:$ + * Description: UART/Serial interface for Samsung S3C4510B SoC + * Runtime Env: ARM7TDMI + * Change History: + * 03-02-04 Create (Curt Brune) curt@cucy.com + * + */ + +#include <common.h> + +#ifdef CONFIG_DRIVER_S3C4510_UART + +#include <asm/hardware.h> +#include "s3c4510b_uart.h" + +static UART *uart; + +/* flush serial input queue. returns 0 on success or negative error + * number otherwise + */ +static int serial_flush_input(void) +{ + volatile u32 tmp; + + /* keep on reading as long as the receiver is not empty */ + while( uart->m_stat.bf.rxReady) { + tmp = uart->m_rx; + } + + return 0; +} + + +/* flush output queue. returns 0 on success or negative error number + * otherwise + */ +static int serial_flush_output(void) +{ + /* wait until the transmitter is no longer busy */ + while( !uart->m_stat.bf.txBufEmpty); + + return 0; +} + + +void serial_setbrg (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + UART_LINE_CTRL ulctrl; + UART_CTRL uctrl; + UART_BAUD_DIV ubd; + + serial_flush_output(); + serial_flush_input(); + + /* control register */ + uctrl.ui = 0x0; + uctrl.bf.rxMode = 0x1; + uctrl.bf.rxIrq = 0x0; + uctrl.bf.txMode = 0x1; + uctrl.bf.DSR = 0x0; + uctrl.bf.sendBreak = 0x0; + uctrl.bf.loopBack = 0x0; + uart->m_ctrl.ui = uctrl.ui; + + /* line control register */ + ulctrl.ui = 0x0; + ulctrl.bf.wordLen = 0x3; /* 8 bit data */ + ulctrl.bf.nStop = 0x0; /* 1 stop bit */ + ulctrl.bf.parity = 0x0; /* no parity */ + ulctrl.bf.clk = 0x0; /* internal clock */ + ulctrl.bf.infra_red = 0x0; /* no infra_red */ + uart->m_lineCtrl.ui = ulctrl.ui; + + ubd.ui = 0x0; + + /* see table on page 10-15 in SAMSUNG S3C4510B manual */ + /* get correct divisor */ + switch(gd->baudrate) { + case 1200: ubd.bf.cnt0 = 1301; break; + case 2400: ubd.bf.cnt0 = 650; break; + case 4800: ubd.bf.cnt0 = 324; break; + case 9600: ubd.bf.cnt0 = 162; break; + case 19200: ubd.bf.cnt0 = 80; break; + case 38400: ubd.bf.cnt0 = 40; break; + case 57600: ubd.bf.cnt0 = 26; break; + case 115200: ubd.bf.cnt0 = 13; break; + } + + uart->m_baudDiv.ui = ubd.ui; + uart->m_baudCnt = 0x0; + uart->m_baudClk = 0x0; + +} + + +/* + * Initialise the serial port with the given baudrate. The settings + * are always 8 data bits, no parity, 1 stop bit, no start bits. + * + */ +int serial_init (void) +{ + +#if CONFIG_SERIAL1 == 1 + uart = (UART *)UART0_BASE; +#elif CONFIG_SERIAL1 == 2 + uart = (UART *)UART1_BASE; +#else +#error CONFIG_SERIAL1 not equal to 1 or 2 +#endif + + serial_setbrg (); + + return (0); +} + + +/* + * Output a single byte to the serial port. + */ +void serial_putc (const char c) +{ + /* wait for room in the transmit FIFO */ + while( !uart->m_stat.bf.txBufEmpty); + + uart->m_tx = c; + + /* + to be polite with serial console add a line feed + to the carriage return character + */ + if (c=='\n') + serial_putc('\r'); +} + +/* + * Test if an input byte is ready from the serial port. Returns non-zero on + * success, 0 otherwise. + */ +int serial_tstc (void) +{ + return uart->m_stat.bf.rxReady; +} + +/* + * Read a single byte from the serial port. Returns 1 on success, 0 + * otherwise. When the function is succesfull, the character read is + * written into its argument c. + */ +int serial_getc (void) +{ + int rv; + + for(;;) { + rv = serial_tstc(); + + if (rv) { + return uart->m_rx & 0xFF; + } + } +} + +void serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } + + /* busy wait for tx complete */ + while ( !uart->m_stat.bf.txComplete); + + /* clear break */ + uart->m_ctrl.bf.sendBreak = 0; + +} + +#endif diff --git a/drivers/s3c4510b_uart.h b/drivers/s3c4510b_uart.h new file mode 100644 index 0000000..b06c76d --- /dev/null +++ b/drivers/s3c4510b_uart.h @@ -0,0 +1,109 @@ +#ifndef __UART_H +#define __UART_H + +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Description: S3C4510B UART register layout + */ + +/* UART LINE CONTROL register */ +typedef struct __BF_UART_LINE_CTRL { + u32 wordLen: 2; + u32 nStop: 1; + u32 parity: 3; + u32 clk: 1; + u32 infra_red: 1; + u32 unused:24; +} BF_UART_LINE_CTRL; + +typedef union _UART_LINE_CTRL { + u32 ui; + BF_UART_LINE_CTRL bf; +} UART_LINE_CTRL; + +/* UART CONTROL register */ +typedef struct __BF_UART_CTRL { + u32 rxMode: 2; + u32 rxIrq: 1; + u32 txMode: 2; + u32 DSR: 1; + u32 sendBreak: 1; + u32 loopBack: 1; + u32 unused:24; +} BF_UART_CTRL; + +typedef union _UART_CTRL { + u32 ui; + BF_UART_CTRL bf; +} UART_CTRL; + +/* UART STATUS register */ +typedef struct __BF_UART_STAT { + u32 overrun: 1; + u32 parity: 1; + u32 frame: 1; + u32 breakIrq: 1; + u32 DTR: 1; + u32 rxReady: 1; + u32 txBufEmpty: 1; + u32 txComplete: 1; + u32 unused:24; +} BF_UART_STAT; + +typedef union _UART_STAT { + u32 ui; + BF_UART_STAT bf; +} UART_STAT; + +/* UART BAUD_DIV register */ +typedef struct __BF_UART_BAUD_DIV { + u32 cnt1: 4; + u32 cnt0:12; + u32 unused:16; +} BF_UART_BAUD_DIV; + +typedef union _UART_BAUD_DIV { + u32 ui; + BF_UART_BAUD_DIV bf; +} UART_BAUD_DIV; + +/* UART register block */ +typedef struct __UART { + volatile UART_LINE_CTRL m_lineCtrl; + volatile UART_CTRL m_ctrl; + volatile UART_STAT m_stat; + volatile u32 m_tx; + volatile u32 m_rx; + volatile UART_BAUD_DIV m_baudDiv; + volatile u32 m_baudCnt; + volatile u32 m_baudClk; +} UART; + +#define NL 0x0A +#define CR 0x0D +#define BSP 0x08 +#define ESC 0x1B +#define CTRLZ 0x1A +#define RUBOUT 0x7F + +#endif diff --git a/drivers/smc91111.c b/drivers/smc91111.c index 2a4f005..6feb1e2 100644 --- a/drivers/smc91111.c +++ b/drivers/smc91111.c @@ -795,11 +795,11 @@ static int smc_open (bd_t * bd) address = smc_mac_addr[i + 1] << 8; address |= smc_mac_addr[i]; - SMC_outw (address, ADDR0_REG + i); + SMC_outw (address, (ADDR0_REG + i)); } #else for (i = 0; i < 6; i++) - SMC_outb (smc_mac_addr[i], ADDR0_REG + i); + SMC_outb (smc_mac_addr[i], (ADDR0_REG + i)); #endif return 0; @@ -1550,7 +1550,7 @@ int get_rom_mac (char *v_rom_mac) SMC_SELECT_BANK (1); for (i=0; i<6; i++) { - v_rom_mac[i] = SMC_inb (ADDR0_REG + i); + v_rom_mac[i] = SMC_inb ((ADDR0_REG + i)); valid_mac |= v_rom_mac[i]; } diff --git a/include/asm-arm/arch-arm720t/hardware.h b/include/asm-arm/arch-arm720t/hardware.h new file mode 100644 index 0000000..5064697 --- /dev/null +++ b/include/asm-arm/arch-arm720t/hardware.h @@ -0,0 +1,39 @@ +#ifndef __ARM7_HW_H +#define __ARM7_HW_H + +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#if defined(CONFIG_S3C4510B) +#include <asm-arm/arch-arm720t/s3c4510b.h> +#elif defined(CONFIG_NETARM) +#include <asm-arm/arch-arm720t/netarm_registers.h> +#elif defined(CONFIG_IMPA7) +/* include IMPA7 specific hardware file if there was one */ +#elif defined(CONFIG_EP7312) +/* include EP7312 specific hardware file if there was one */ +#else +#error No hardware file defined for this configuration +#endif + +#endif /* __ARM7_HW_H */ diff --git a/include/asm-arm/arch-arm720t/s3c4510b.h b/include/asm-arm/arch-arm720t/s3c4510b.h new file mode 100644 index 0000000..7acbec4 --- /dev/null +++ b/include/asm-arm/arch-arm720t/s3c4510b.h @@ -0,0 +1,231 @@ +#ifndef __HW_S3C4510_H +#define __HW_S3C4510_H + +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Description: Samsung S3C4510B register layout + */ + +/*------------------------------------------------------------------------ + * ASIC Address Definition + *----------------------------------------------------------------------*/ + +/* L1 8KB on chip SRAM base address */ +#define SRAM_BASE (0x03fe0000) + +/* Special Register Start Address After System Reset */ +#define REG_BASE (0x03ff0000) +#define SPSTR (REG_BASE) + +/* *********************** */ +/* System Manager Register */ +/* *********************** */ +#define REG_SYSCFG (REG_BASE+0x0000) + +#define REG_CLKCON (REG_BASE+0x3000) +#define REG_EXTACON0 (REG_BASE+0x3008) +#define REG_EXTACON1 (REG_BASE+0x300c) +#define REG_EXTDBWTH (REG_BASE+0x3010) +#define REG_ROMCON0 (REG_BASE+0x3014) +#define REG_ROMCON1 (REG_BASE+0x3018) +#define REG_ROMCON2 (REG_BASE+0x301c) +#define REG_ROMCON3 (REG_BASE+0x3020) +#define REG_ROMCON4 (REG_BASE+0x3024) +#define REG_ROMCON5 (REG_BASE+0x3028) +#define REG_DRAMCON0 (REG_BASE+0x302c) +#define REG_DRAMCON1 (REG_BASE+0x3030) +#define REG_DRAMCON2 (REG_BASE+0x3034) +#define REG_DRAMCON3 (REG_BASE+0x3038) +#define REG_REFEXTCON (REG_BASE+0x303c) + +/* *********************** */ +/* Ethernet BDMA Register */ +/* *********************** */ +#define REG_BDMATXCON (REG_BASE+0x9000) +#define REG_BDMARXCON (REG_BASE+0x9004) +#define REG_BDMATXPTR (REG_BASE+0x9008) +#define REG_BDMARXPTR (REG_BASE+0x900c) +#define REG_BDMARXLSZ (REG_BASE+0x9010) +#define REG_BDMASTAT (REG_BASE+0x9014) + +/* Content Address Memory */ +#define REG_CAM_BASE (REG_BASE+0x9100) + +#define REG_BDMATXBUF (REG_BASE+0x9200) +#define REG_BDMARXBUF (REG_BASE+0x9800) + +/* *********************** */ +/* Ethernet MAC Register */ +/* *********************** */ +#define REG_MACCON (REG_BASE+0xa000) +#define REG_CAMCON (REG_BASE+0xa004) +#define REG_MACTXCON (REG_BASE+0xa008) +#define REG_MACTXSTAT (REG_BASE+0xa00c) +#define REG_MACRXCON (REG_BASE+0xa010) +#define REG_MACRXSTAT (REG_BASE+0xa014) +#define REG_STADATA (REG_BASE+0xa018) +#define REG_STACON (REG_BASE+0xa01c) +#define REG_CAMEN (REG_BASE+0xa028) +#define REG_EMISSCNT (REG_BASE+0xa03c) +#define REG_EPZCNT (REG_BASE+0xa040) +#define REG_ERMPZCNT (REG_BASE+0xa044) +#define REG_ETXSTAT (REG_BASE+0x9040) +#define REG_MACRXDESTR (REG_BASE+0xa064) +#define REG_MACRXSTATEM (REG_BASE+0xa090) +#define REG_MACRXFIFO (REG_BASE+0xa200) + +/********************/ +/* I2C Bus Register */ +/********************/ +#define REG_I2C_CON (REG_BASE+0xf000) +#define REG_I2C_BUF (REG_BASE+0xf004) +#define REG_I2C_PS (REG_BASE+0xf008) +#define REG_I2C_COUNT (REG_BASE+0xf00c) + +/********************/ +/* GDMA 0 */ +/********************/ +#define REG_GDMACON0 (REG_BASE+0xb000) +#define REG_GDMA0_RUN_ENABLE (REG_BASE+0xb020) +#define REG_GDMASRC0 (REG_BASE+0xb004) +#define REG_GDMADST0 (REG_BASE+0xb008) +#define REG_GDMACNT0 (REG_BASE+0xb00c) + +/********************/ +/* GDMA 1 */ +/********************/ +#define REG_GDMACON1 (REG_BASE+0xc000) +#define REG_GDMA1_RUN_ENABLE (REG_BASE+0xc020) +#define REG_GDMASRC1 (REG_BASE+0xc004) +#define REG_GDMADST1 (REG_BASE+0xc008) +#define REG_GDMACNT1 (REG_BASE+0xc00c) + +/********************/ +/* UART 0 */ +/********************/ +#define UART0_BASE (REG_BASE+0xd000) +#define REG_UART0_LCON (REG_BASE+0xd000) +#define REG_UART0_CTRL (REG_BASE+0xd004) +#define REG_UART0_STAT (REG_BASE+0xd008) +#define REG_UART0_TXB (REG_BASE+0xd00c) +#define REG_UART0_RXB (REG_BASE+0xd010) +#define REG_UART0_BAUD_DIV (REG_BASE+0xd014) +#define REG_UART0_BAUD_CNT (REG_BASE+0xd018) +#define REG_UART0_BAUD_CLK (REG_BASE+0xd01C) + +/********************/ +/* UART 1 */ +/********************/ +#define UART1_BASE (REG_BASE+0xe000) +#define REG_UART1_LCON (REG_BASE+0xe000) +#define REG_UART1_CTRL (REG_BASE+0xe004) +#define REG_UART1_STAT (REG_BASE+0xe008) +#define REG_UART1_TXB (REG_BASE+0xe00c) +#define REG_UART1_RXB (REG_BASE+0xe010) +#define REG_UART1_BAUD_DIV (REG_BASE+0xe014) +#define REG_UART1_BAUD_CNT (REG_BASE+0xe018) +#define REG_UART1_BAUD_CLK (REG_BASE+0xe01C) + +/********************/ +/* Timer Register */ +/********************/ +#define REG_TMOD (REG_BASE+0x6000) +#define REG_TDATA0 (REG_BASE+0x6004) +#define REG_TDATA1 (REG_BASE+0x6008) +#define REG_TCNT0 (REG_BASE+0x600c) +#define REG_TCNT1 (REG_BASE+0x6010) + +/**********************/ +/* I/O Port Interface */ +/**********************/ +#define REG_IOPMODE (REG_BASE+0x5000) +#define REG_IOPCON (REG_BASE+0x5004) +#define REG_IOPDATA (REG_BASE+0x5008) + +/*********************************/ +/* Interrupt Controller Register */ +/*********************************/ +#define REG_INTMODE (REG_BASE+0x4000) +#define REG_INTPEND (REG_BASE+0x4004) +#define REG_INTMASK (REG_BASE+0x4008) + +#define REG_INTPRI0 (REG_BASE+0x400c) +#define REG_INTPRI1 (REG_BASE+0x4010) +#define REG_INTPRI2 (REG_BASE+0x4014) +#define REG_INTPRI3 (REG_BASE+0x4018) +#define REG_INTPRI4 (REG_BASE+0x401c) +#define REG_INTPRI5 (REG_BASE+0x4020) +#define REG_INTOFFSET (REG_BASE+0x4024) +#define REG_INTPNDPRI (REG_BASE+0x4028) +#define REG_INTPNDTST (REG_BASE+0x402C) + +/*********************************/ +/* CACHE CONTROL MASKS */ +/*********************************/ +#define CACHE_STALL (0x00000001) +#define CACHE_ENABLE (0x00000002) +#define CACHE_WRITE_BUFF (0x00000004) +#define CACHE_MODE (0x00000030) +#define CACHE_MODE_00 (0x00000000) +#define CACHE_MODE_01 (0x00000010) +#define CACHE_MODE_10 (0x00000020) + +/*********************************/ +/* CACHE RAM BASE ADDRESSES */ +/*********************************/ +#define CACHE_SET0_RAM (0x10000000) +#define CACHE_SET1_RAM (0x10800000) +#define CACHE_TAG_RAM (0x11000000) + +/*********************************/ +/* CACHE_DISABLE MASK */ +/*********************************/ +#define CACHE_DISABLE_MASK (0x04000000) + +#define GET_REG(reg) (*((volatile u32 *)(reg))) +#define PUT_REG(reg, val) (*((volatile u32 *)(reg)) = ((u32)(val))) +#define SET_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) | mask)) +#define CLR_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) & ~mask)) +#define PUT_U16(reg, val) (*((volatile u16 *)(reg)) = ((u16)(val))) +#define PUT__U8(reg, val) (*((volatile u8 *)(reg)) = (( u8)((val)&0xFF))) +#define GET__U8(reg) (*((volatile u8 *)(reg))) + +/***********************************/ +/* CLOCK CONSTANTS -- 50 MHz Clock */ +/***********************************/ + +#define CLK_FREQ_MHZ (50) +#define t_data_us(t) ((t)*CLK_FREQ_MHZ-1) /* t is time tick,unit[us] */ +#define t_data_ms(t) (t_data_us((t)*1000)) /* t is time tick,unit[ms] */ + +/*********************************************************/ +/* TIMER MODE REGISTER */ +/*********************************************************/ +#define TM0_RUN 0x01 /* Timer 0 enable */ +#define TM0_TOGGLE 0x02 /* 0, interval mode */ +#define TM0_OUT_1 0x04 /* Timer 0 Initial TOUT0 value */ +#define TM1_RUN 0x08 /* Timer 1 enable */ +#define TM1_TOGGLE 0x10 /* 0, interval mode */ +#define TM1_OUT_1 0x20 /* Timer 0 Initial TOUT0 value */ + +#endif /* __S3C4510_h */ diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h new file mode 100644 index 0000000..4e14bf1 --- /dev/null +++ b/include/configs/evb4510.h @@ -0,0 +1,164 @@ +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * Configuation settings for evb4510 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start u-boot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + * + * Also swap the flash1 and flash2 addresses during debug. + * + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ +#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */ +#define CONFIG_S3C4510B 1 /* it's a S3C4510B chip */ +#define CONFIG_EVB4510 1 /* on an EVB4510 Board */ + +#undef CONFIG_USE_IRQ /* don't need them anymore */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_S3C4510_ETH 1 +#define CONFIG_DRIVER_S3C4510_I2C 1 +#define CONFIG_DRIVER_S3C4510_UART 1 +#define CONFIG_DRIVER_S3C4510_FLASH 1 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 2 /* we use Serial line 2, could also use 1 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 19200 + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_ETHADDR 00:40:95:36:35:33 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 10.0.0.11 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_CMDLINE_TAG /* submit bootargs to kernel */ + +/*#define CONFIG_BOOTDELAY 10*/ +/* args and cmd for uClinux-image @ 0x10020000, ramdisk-image @ 0x100a0000 */ +#define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000" +#define CONFIG_BOOTARGS "console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "evb4510 # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00780000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x00000000 /* default load address */ + +#define CFG_HZ 50000000 /* decrementer freq: 50 MHz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below +*/ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map after relocation + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */ + +#define PHYS_FLASH_1 0x01000000 /* Flash Bank #1 */ +#define PHYS_FLASH_1_SIZE 0x00200000 /* 2 MB (one chip, 8bit access) */ + +#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */ +#define PHYS_FLASH_2_SIZE 0x00080000 /* 512KB (one chip, 8bit access) */ + +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_FLASH_SIZE PHYS_FLASH_1_SIZE + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ +#define CFG_MAIN_SECT_SIZE 0x00010000 /* main size of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (4*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ + +/* environment settings */ +#define CFG_ENV_IS_IN_FLASH +#undef CFG_ENV_IS_NOWHERE + +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x20000) /* environment start address */ +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x4000 /* max size for environment */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/h2_p2_dbg_board.h b/include/configs/h2_p2_dbg_board.h index 6082d2c..e0d823f 100644 --- a/include/configs/h2_p2_dbg_board.h +++ b/include/configs/h2_p2_dbg_board.h @@ -108,14 +108,14 @@ static inline void set_led_state(int state) { static unsigned long hw_led_state = 0; - volatile unsigned short *led_address = 0x04000016; + volatile unsigned short *led_address = (volatile unsigned short *)0x04000016; hw_led_state = ((unsigned long)state); *((unsigned short *) (led_address)) = (unsigned short) (~hw_led_state & 0xFFFF); } -static inline void spin_up_leds() +static inline void spin_up_leds(void) { volatile int i, j, k; |