diff options
| -rw-r--r-- | arch/powerpc/cpu/mpc8xxx/ddr/options.c | 40 | ||||
| -rw-r--r-- | doc/README.fsl-ddr | 25 |
2 files changed, 39 insertions, 26 deletions
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 46731c8..11281b7 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -8,6 +8,7 @@ */ #include <common.h> +#include <hwconfig.h> #include <asm/fsl_ddr_sdram.h> #include "ddr.h" @@ -23,7 +24,6 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, unsigned int ctrl_num) { unsigned int i; - const char *p; /* Chip select options. */ @@ -221,7 +221,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, * should be a subset of the requested configuration. */ #if (CONFIG_NUM_DDR_CONTROLLERS > 1) - if ((p = getenv("memctl_intlv_ctl")) != NULL) { + if (hwconfig_sub("fsl_ddr", "ctlr_intlv")) { if (pdimm[0].n_ranks == 0) { printf("There is no rank on CS0. Because only rank on " "CS0 and ranks chip-select interleaved with CS0" @@ -230,37 +230,47 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, popts->memctl_interleaving = 0; } else { popts->memctl_interleaving = 1; - if (strcmp(p, "cacheline") == 0) + /* test null first. if CONFIG_HWCONFIG is not defined + * hwconfig_arg_cmp returns non-zero */ + if (hwconfig_subarg_cmp("fsl_ddr", "ctlr_intlv", "null")) { + popts->memctl_interleaving = 0; + debug("memory controller interleaving disabled.\n"); + } else if (hwconfig_subarg_cmp("fsl_ddr", "ctlr_intlv", "cacheline")) popts->memctl_interleaving_mode = FSL_DDR_CACHE_LINE_INTERLEAVING; - else if (strcmp(p, "page") == 0) + else if (hwconfig_subarg_cmp("fsl_ddr", "ctlr_intlv", "page")) popts->memctl_interleaving_mode = FSL_DDR_PAGE_INTERLEAVING; - else if (strcmp(p, "bank") == 0) + else if (hwconfig_subarg_cmp("fsl_ddr", "ctlr_intlv", "bank")) popts->memctl_interleaving_mode = FSL_DDR_BANK_INTERLEAVING; - else if (strcmp(p, "superbank") == 0) + else if (hwconfig_subarg_cmp("fsl_ddr", "ctlr_intlv", "superbank")) popts->memctl_interleaving_mode = FSL_DDR_SUPERBANK_INTERLEAVING; - else - popts->memctl_interleaving_mode = - simple_strtoul(p, NULL, 0); + else { + popts->memctl_interleaving = 0; + printf("hwconfig has unrecognized parameter for ctlr_intlv.\n"); + } } } #endif - if( ((p = getenv("ba_intlv_ctl")) != NULL) && + if ((hwconfig_sub("fsl_ddr", "bank_intlv")) && (CONFIG_CHIP_SELECTS_PER_CTRL > 1)) { - if (strcmp(p, "cs0_cs1") == 0) + /* test null first. if CONFIG_HWCONFIG is not defined, + * hwconfig_arg_cmp returns non-zero */ + if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "null")) + printf("bank interleaving disabled.\n"); + else if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "cs0_cs1")) popts->ba_intlv_ctl = FSL_DDR_CS0_CS1; - else if (strcmp(p, "cs2_cs3") == 0) + else if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "cs2_cs3")) popts->ba_intlv_ctl = FSL_DDR_CS2_CS3; - else if (strcmp(p, "cs0_cs1_and_cs2_cs3") == 0) + else if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "cs0_cs1_and_cs2_cs3")) popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3; - else if (strcmp(p, "cs0_cs1_cs2_cs3") == 0) + else if (hwconfig_subarg_cmp("fsl_ddr", "bank_intlv", "cs0_cs1_cs2_cs3")) popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3; else - popts->ba_intlv_ctl = simple_strtoul(p, NULL, 0); + printf("hwconfig has unrecognized parameter for ba_intlv_ctl.\n"); switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { case FSL_DDR_CS0_CS1_CS2_CS3: diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr index 9c2224f..6e4f6e9 100644 --- a/doc/README.fsl-ddr +++ b/doc/README.fsl-ddr @@ -32,38 +32,41 @@ The ways to configure the ddr interleaving mode 1. In board header file(e.g.MPC8572DS.h), add default interleaving setting under "CONFIG_EXTRA_ENV_SETTINGS", like: #define CONFIG_EXTRA_ENV_SETTINGS \ - "memctl_intlv_ctl=2\0" \ + "hwconfig=fsl_ddr:ctlr_intlv=bank" \ ...... 2. Run u-boot "setenv" command to configure the memory interleaving mode. Either numerical or string value is accepted. # disable memory controller interleaving - setenv memctl_intlv_ctl + setenv hwconfig "fsl_ddr:ctlr_intlv=null" # cacheline interleaving - setenv memctl_intlv_ctl 0 or setenv memctl_intlv_ctl cacheline + setenv hwconfig "fsl_ddr:ctlr_intlv=cacheline" # page interleaving - setenv memctl_intlv_ctl 1 or setenv memctl_intlv_ctl page + setenv hwconfig "fsl_ddr:ctlr_intlv=page" # bank interleaving - setenv memctl_intlv_ctl 2 or setenv memctl_intlv_ctl bank + setenv hwconfig "fsl_ddr:ctlr_intlv=bank" # superbank - setenv memctl_intlv_ctl 3 or setenv memctl_intlv_ctl superbank + setenv hwconfig "fsl_ddr:ctlr_intlv=superbank" # disable bank (chip-select) interleaving - setenv ba_intlv_ctl + setenv hwconfig "fsl_ddr:bank_intlv=null" # bank(chip-select) interleaving cs0+cs1 - setenv ba_intlv_ctl 0x40 or setenv ba_intlv_ctl cs0_cs1 + setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1" # bank(chip-select) interleaving cs2+cs3 - setenv ba_intlv_ctl 0x20 or setenv ba_intlv_ctl cs2_cs3 + setenv hwconfig "fsl_ddr:bank_intlv=cs2_cs3" # bank(chip-select) interleaving (cs0+cs1) and (cs2+cs3) (2x2) - setenv ba_intlv_ctl 0x60 or setenv ba_intlv_ctl cs0_cs1_and_cs2_cs3 + setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_and_cs2_cs3" # bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1) - setenv ba_intlv_ctl 0x04 or setenv ba_intlv_ctl cs0_cs1_cs2_cs3 + setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_cs2_cs3" + + The above memory controller interleaving and bank interleaving can be mixed. The syntax is + setenv hwconfig "fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1" |