summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS9
-rwxr-xr-xMAKEALL3
-rw-r--r--Makefile10
-rw-r--r--arch/arm/cpu/arm1136/cpu.c1
-rw-r--r--arch/arm/cpu/arm1136/start.S4
-rw-r--r--arch/arm/cpu/arm1176/cpu.c3
-rw-r--r--arch/arm/cpu/arm1176/start.S65
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/Makefile44
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/aemif.c93
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/clock.c451
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/init.c37
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S25
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/mux.c334
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/timer.c122
-rw-r--r--arch/arm/cpu/arm1176/tnetv107x/wdt.c180
-rw-r--r--arch/arm/cpu/arm_cortexa8/omap3/Makefile5
-rw-r--r--arch/arm/cpu/arm_cortexa8/omap3/board.c34
-rw-r--r--arch/arm/cpu/arm_cortexa8/omap3/emif4.c168
-rw-r--r--arch/arm/cpu/arm_cortexa8/omap3/mem.c90
-rw-r--r--arch/arm/cpu/arm_cortexa8/omap3/sdrc.c202
-rw-r--r--arch/arm/cpu/arm_cortexa8/omap3/sys_info.c41
-rw-r--r--arch/arm/include/asm/arch-omap3/cpu.h25
-rw-r--r--arch/arm/include/asm/arch-omap3/emif4.h79
-rw-r--r--arch/arm/include/asm/arch-omap3/mem.h13
-rw-r--r--arch/arm/include/asm/arch-omap3/sys_proto.h3
-rw-r--r--arch/arm/include/asm/arch-tnetv107x/clock.h68
-rw-r--r--arch/arm/include/asm/arch-tnetv107x/emif_defs.h1
-rw-r--r--arch/arm/include/asm/arch-tnetv107x/hardware.h173
-rw-r--r--arch/arm/include/asm/arch-tnetv107x/mux.h306
-rw-r--r--arch/arm/include/asm/arch-tnetv107x/nand_defs.h38
-rw-r--r--board/logicpd/am3517evm/Makefile46
-rw-r--r--board/logicpd/am3517evm/am3517evm.c76
-rw-r--r--board/logicpd/am3517evm/am3517evm.h445
-rw-r--r--board/logicpd/am3517evm/config.mk30
-rw-r--r--board/ronetix/pm9g45/Makefile54
-rw-r--r--board/ronetix/pm9g45/config.mk1
-rw-r--r--board/ronetix/pm9g45/pm9g45.c188
-rw-r--r--board/ti/tnetv107xevm/Makefile49
-rw-r--r--board/ti/tnetv107xevm/config.mk20
-rw-r--r--board/ti/tnetv107xevm/sdb_board.c149
-rw-r--r--drivers/spi/davinci_spi.c77
-rw-r--r--include/configs/am3517_evm.h296
-rw-r--r--include/configs/devkit8000.h2
-rw-r--r--include/configs/omap3_beagle.h2
-rw-r--r--include/configs/omap3_evm.h10
-rw-r--r--include/configs/omap3_overo.h2
-rw-r--r--include/configs/omap3_pandora.h2
-rw-r--r--include/configs/omap3_sdp3430.h2
-rw-r--r--include/configs/omap3_zoom1.h2
-rw-r--r--include/configs/omap3_zoom2.h2
-rw-r--r--include/configs/pm9g45.h186
-rw-r--r--include/configs/smdk6400.h8
-rw-r--r--include/configs/tnetv107x_evm.h153
53 files changed, 4202 insertions, 227 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index c690697..710f6eb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -62,6 +62,10 @@ Oliver Brown <obrown@adventnetworks.com>
gw8260 MPC8260
+Cyril Chemparathy <cyril@ti.com>
+
+ tnetv107x_evm tnetv107x
+
Conn Clark <clark@esteem.com>
ESTEEM192E MPC8xx
@@ -228,6 +232,7 @@ Ilko Iliev <iliev@ronetix.at>
PM9261 AT91SAM9261
PM9263 AT91SAM9263
+ PM9G45 ARM926EJS (AT91SAM9G45 SoC)
Gary Jennejohn <garyj@denx.de>
@@ -600,6 +605,10 @@ Kshitij Gupta <kshitij@ti.com>
omap1510inn ARM925T
omap1610inn ARM926EJS
+Vaibhav Hiremath <hvaibhav@ti.com>
+
+ am3517_evm ARM CORTEX-A8 (AM35x SoC)
+
Grazvydas Ignotas <notasas@gmail.com>
omap3_pandora ARM CORTEX-A8 (OMAP3xx SoC)
diff --git a/MAKEALL b/MAKEALL
index 3723c46..b07b6f4 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -635,12 +635,14 @@ LIST_ARM11=" \
mx31pdk_nand \
qong \
smdk6400 \
+ tnetv107x_evm \
"
#########################################################################
## ARM Cortex-A8 Systems
#########################################################################
LIST_ARM_CORTEX_A8=" \
+ am3517_evm \
devkit8000 \
mx51evk \
omap3_beagle \
@@ -683,6 +685,7 @@ LIST_at91=" \
otc570 \
pm9261 \
pm9263 \
+ pm9g45 \
SBC35_A9G20 \
TNY_A9260 \
TNY_A9G20 \
diff --git a/Makefile b/Makefile
index 9174b24..36aac29 100644
--- a/Makefile
+++ b/Makefile
@@ -2873,6 +2873,10 @@ otc570_config : unconfig
pm9263_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
+pm9g45_config : unconfig
+ @mkdir -p $(obj)include
+ @$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
+
SBC35_A9G20_NANDFLASH_config \
SBC35_A9G20_EEPROM_config \
SBC35_A9G20_config : unconfig
@@ -3155,6 +3159,9 @@ SMN42_config : unconfig
## ARM CORTEX Systems
#########################################################################
+am3517_evm_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 am3517evm logicpd omap3
+
devkit8000_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
@@ -3327,6 +3334,9 @@ smdk6400_config : unconfig
fi
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+tnetv107x_evm_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm1176 tnetv107xevm ti tnetv107x
+
#========================================================================
# i386
#========================================================================
diff --git a/arch/arm/cpu/arm1136/cpu.c b/arch/arm/cpu/arm1136/cpu.c
index ade7f46..2b91631 100644
--- a/arch/arm/cpu/arm1136/cpu.c
+++ b/arch/arm/cpu/arm1136/cpu.c
@@ -71,6 +71,7 @@ static void cache_flush(void)
{
unsigned long i = 0;
+ asm ("mcr p15, 0, %0, c7, c10, 0": :"r" (i)); /* clean entire data cache */
asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i)); /* invalidate both caches and flush btb */
asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (i)); /* mem barrier to sync things */
}
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index 957f438..922d01c 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -226,8 +226,8 @@ cpu_init_crit:
* flush v4 I/D caches
*/
mov r0, #0
- mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
- mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
+ mcr p15, 0, r0, c7, c7, 0 /* Invalidate I+D+BTB caches */
+ mcr p15, 0, r0, c8, c7, 0 /* Invalidate Unified TLB */
/*
* disable MMU stuff and caches
diff --git a/arch/arm/cpu/arm1176/cpu.c b/arch/arm/cpu/arm1176/cpu.c
index befa0cd..c0fd114 100644
--- a/arch/arm/cpu/arm1176/cpu.c
+++ b/arch/arm/cpu/arm1176/cpu.c
@@ -33,9 +33,6 @@
#include <common.h>
#include <command.h>
-#ifdef CONFIG_S3C64XX
-#include <asm/arch/s3c6400.h>
-#endif
#include <asm/system.h>
static void cache_flush (void);
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index e2b6c9b..a540edb 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -1,5 +1,5 @@
/*
- * armboot - Startup Code for S3C6400/ARM1176 CPU-core
+ * armboot - Startup Code for ARM1176 CPU-core
*
* Copyright (c) 2007 Samsung Electronics
*
@@ -35,9 +35,6 @@
#ifdef CONFIG_ENABLE_MMU
#include <asm/proc/domain.h>
#endif
-#ifdef CONFIG_S3C64XX
-#include <asm/arch/s3c6400.h>
-#endif
#if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE)
#define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE
@@ -172,14 +169,10 @@ cpu_init_crit:
bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
orr r0, r0, #0x00000002 @ set bit 2 (A) Align
orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
+
/* Prepare to disable the MMU */
- adr r1, mmu_disable_phys
- /* We presume we're within the first 1024 bytes */
- and r1, r1, #0x3fc
- ldr r2, _TEXT_PHY_BASE
- ldr r3, =0xfff00000
- and r2, r2, r3
- orr r2, r2, r1
+ adr r2, mmu_disable_phys
+ sub r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - TEXT_BASE)
b mmu_disable
.align 5
@@ -189,14 +182,30 @@ mmu_disable:
nop
nop
mov pc, r2
+mmu_disable_phys:
+
+#ifdef CONFIG_DISABLE_TCM
+ /*
+ * Disable the TCMs
+ */
+ mrc p15, 0, r0, c0, c0, 2 /* Return TCM details */
+ cmp r0, #0
+ beq skip_tcmdisable
+ mov r1, #0
+ mov r2, #1
+ tst r0, r2
+ mcrne p15, 0, r1, c9, c1, 1 /* Disable Instruction TCM if present*/
+ tst r0, r2, LSL #16
+ mcrne p15, 0, r1, c9, c1, 0 /* Disable Data TCM if present*/
+skip_tcmdisable:
+#endif
#endif
-mmu_disable_phys:
-#ifdef CONFIG_S3C64XX
+#ifdef CONFIG_PERIPORT_REMAP
/* Peri port setup */
- ldr r0, =0x70000000
- orr r0, r0, #0x13
- mcr p15,0,r0,c15,c2,4 @ 256M (0x70000000 - 0x7fffffff)
+ ldr r0, =CONFIG_PERIPORT_BASE
+ orr r0, r0, #CONFIG_PERIPORT_SIZE
+ mcr p15,0,r0,c15,c2,4
#endif
/*
@@ -204,7 +213,25 @@ mmu_disable_phys:
*/
bl lowlevel_init /* go setup pll,mux,memory */
-after_copy:
+#ifndef CONFIG_SKIP_RELOCATE_UBOOT
+relocate: /* relocate U-Boot to RAM */
+ adr r0, _start /* r0 <- current position of code */
+ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
+ cmp r0, r1 /* don't reloc during debug */
+ beq stack_setup
+
+ ldr r2, _armboot_start
+ ldr r3, _bss_start
+ sub r2, r3, r2 /* r2 <- size of armboot */
+ add r2, r0, r2 /* r2 <- source end address */
+
+copy_loop:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end addreee [r2] */
+ ble copy_loop
+#endif /* CONFIG_SKIP_RELOCATE_UBOOT */
+
#ifdef CONFIG_ENABLE_MMU
enable_mmu:
/* enable domain access */
@@ -240,9 +267,9 @@ mmu_enable:
nop
nop
mov pc, r2
+skip_hw_init:
#endif
-skip_hw_init:
/* Set up the stack */
stack_setup:
ldr r0, =CONFIG_SYS_UBOOT_BASE /* base of copy in DRAM */
@@ -310,6 +337,8 @@ phy_last_jump:
mov r0, #0
mov pc, r9
#endif
+
+
/*
*************************************************************************
*
diff --git a/arch/arm/cpu/arm1176/tnetv107x/Makefile b/arch/arm/cpu/arm1176/tnetv107x/Makefile
new file mode 100644
index 0000000..fe9d8a0
--- /dev/null
+++ b/arch/arm/cpu/arm1176/tnetv107x/Makefile
@@ -0,0 +1,44 @@
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).a
+
+COBJS += aemif.o clock.o init.o mux.o timer.o wdt.o
+SOBJS += lowlevel_init.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/arm1176/tnetv107x/aemif.c b/arch/arm/cpu/arm1176/tnetv107x/aemif.c
new file mode 100644
index 0000000..172f583
--- /dev/null
+++ b/arch/arm/cpu/arm1176/tnetv107x/aemif.c
@@ -0,0 +1,93 @@
+/*
+ * TNETV107X: Asynchronous EMIF Configuration
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/mux.h>
+
+#define ASYNC_EMIF_BASE TNETV107X_ASYNC_EMIF_CNTRL_BASE
+#define ASYNC_EMIF_CONFIG(cs) (ASYNC_EMIF_BASE+0x10+(cs)*4)
+#define ASYNC_EMIF_ONENAND_CONTROL (ASYNC_EMIF_BASE+0x5c)
+#define ASYNC_EMIF_NAND_CONTROL (ASYNC_EMIF_BASE+0x60)
+#define ASYNC_EMIF_WAITCYCLE_CONFIG (ASYNC_EMIF_BASE+0x4)
+
+#define CONFIG_SELECT_STROBE(v) ((v) ? 1 << 31 : 0)
+#define CONFIG_EXTEND_WAIT(v) ((v) ? 1 << 30 : 0)
+#define CONFIG_WR_SETUP(v) (((v) & 0x0f) << 26)
+#define CONFIG_WR_STROBE(v) (((v) & 0x3f) << 20)
+#define CONFIG_WR_HOLD(v) (((v) & 0x07) << 17)
+#define CONFIG_RD_SETUP(v) (((v) & 0x0f) << 13)
+#define CONFIG_RD_STROBE(v) (((v) & 0x3f) << 7)
+#define CONFIG_RD_HOLD(v) (((v) & 0x07) << 4)
+#define CONFIG_TURN_AROUND(v) (((v) & 0x03) << 2)
+#define CONFIG_WIDTH(v) (((v) & 0x03) << 0)
+
+#define NUM_CS 4
+
+#define set_config_field(reg, field, val) \
+ do { \
+ if (val != -1) { \
+ reg &= ~CONFIG_##field(0xffffffff); \
+ reg |= CONFIG_##field(val); \
+ } \
+ } while (0)
+
+void configure_async_emif(int cs, struct async_emif_config *cfg)
+{
+ unsigned long tmp;
+
+ if (cfg->mode == ASYNC_EMIF_MODE_NAND) {
+ tmp = __raw_readl(ASYNC_EMIF_NAND_CONTROL);
+ tmp |= (1 << cs);
+ __raw_writel(tmp, ASYNC_EMIF_NAND_CONTROL);
+
+ } else if (cfg->mode == ASYNC_EMIF_MODE_ONENAND) {
+ tmp = __raw_readl(ASYNC_EMIF_ONENAND_CONTROL);
+ tmp |= (1 << cs);
+ __raw_writel(tmp, ASYNC_EMIF_ONENAND_CONTROL);
+ }
+
+ tmp = __raw_readl(ASYNC_EMIF_CONFIG(cs));
+
+ set_config_field(tmp, SELECT_STROBE, cfg->select_strobe);
+ set_config_field(tmp, EXTEND_WAIT, cfg->extend_wait);
+ set_config_field(tmp, WR_SETUP, cfg->wr_setup);
+ set_config_field(tmp, WR_STROBE, cfg->wr_strobe);
+ set_config_field(tmp, WR_HOLD, cfg->wr_hold);
+ set_config_field(tmp, RD_SETUP, cfg->rd_setup);
+ set_config_field(tmp, RD_STROBE, cfg->rd_strobe);
+ set_config_field(tmp, RD_HOLD, cfg->rd_hold);
+ set_config_field(tmp, TURN_AROUND, cfg->turn_around);
+ set_config_field(tmp, WIDTH, cfg->width);
+
+ __raw_writel(tmp, ASYNC_EMIF_CONFIG(cs));
+}
+
+void init_async_emif(int num_cs, struct async_emif_config *config)
+{
+ int cs;
+
+ clk_enable(TNETV107X_LPSC_AEMIF);
+
+ for (cs = 0; cs < num_cs; cs++)
+ configure_async_emif(cs, config + cs);
+}
diff --git a/arch/arm/cpu/arm1176/tnetv107x/clock.c b/arch/arm/cpu/arm1176/tnetv107x/clock.c
new file mode 100644
index 0000000..e26fec1
--- /dev/null
+++ b/arch/arm/cpu/arm1176/tnetv107x/clock.c
@@ -0,0 +1,451 @@
+/*
+ * TNETV107X: Clock management APIs
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm-generic/errno.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch/clock.h>
+
+#define CLOCK_BASE TNETV107X_CLOCK_CONTROL_BASE
+#define PSC_BASE TNETV107X_PSC_BASE
+
+#define BIT(x) (1 << (x))
+
+#define MAX_PREDIV 64
+#define MAX_POSTDIV 8
+#define MAX_MULT 512
+#define MAX_DIV (MAX_PREDIV * MAX_POSTDIV)
+
+/* LPSC registers */
+#define PSC_PTCMD 0x120
+#define PSC_PTSTAT 0x128
+#define PSC_MDSTAT(n) (0x800 + (n) * 4)
+#define PSC_MDCTL(n) (0xA00 + (n) * 4)
+
+#define PSC_MDCTL_LRSTZ BIT(8)
+
+#define psc_reg_read(reg) __raw_readl((u32 *)(PSC_BASE + (reg)))
+#define psc_reg_write(reg, val) __raw_writel(val, (u32 *)(PSC_BASE + (reg)))
+
+/* SSPLL registers */
+struct sspll_regs {
+ u32 modes;
+ u32 postdiv;
+ u32 prediv;
+ u32 mult_factor;
+ u32 divider_range;
+ u32 bw_divider;
+ u32 spr_amount;
+ u32 spr_rate_div;
+ u32 diag;
+};
+
+/* SSPLL base addresses */
+static struct sspll_regs *sspll_regs[] = {
+ (struct sspll_regs *)(CLOCK_BASE + 0x040),
+ (struct sspll_regs *)(CLOCK_BASE + 0x080),
+ (struct sspll_regs *)(CLOCK_BASE + 0x0c0),
+};
+
+#define sspll_reg(pll, reg) (&(sspll_regs[pll]->reg))
+#define sspll_reg_read(pll, reg) __raw_readl(sspll_reg(pll, reg))
+#define sspll_reg_write(pll, reg, val) __raw_writel(val, sspll_reg(pll, reg))
+
+
+/* PLL Control Registers */
+struct pllctl_regs {
+ u32 ctl; /* 00 */
+ u32 ocsel; /* 04 */
+ u32 secctl; /* 08 */
+ u32 __pad0;
+ u32 mult; /* 10 */
+ u32 prediv; /* 14 */
+ u32 div1; /* 18 */
+ u32 div2; /* 1c */
+ u32 div3; /* 20 */
+ u32 oscdiv1; /* 24 */
+ u32 postdiv; /* 28 */
+ u32 bpdiv; /* 2c */
+ u32 wakeup; /* 30 */
+ u32 __pad1;
+ u32 cmd; /* 38 */
+ u32 stat; /* 3c */
+ u32 alnctl; /* 40 */
+ u32 dchange; /* 44 */
+ u32 cken; /* 48 */
+ u32 ckstat; /* 4c */
+ u32 systat; /* 50 */
+ u32 ckctl; /* 54 */
+ u32 __pad2[2];
+ u32 div4; /* 60 */
+ u32 div5; /* 64 */
+ u32 div6; /* 68 */
+ u32 div7; /* 6c */
+ u32 div8; /* 70 */
+};
+
+struct lpsc_map {
+ int pll, div;
+};
+
+static struct pllctl_regs *pllctl_regs[] = {
+ (struct pllctl_regs *)(CLOCK_BASE + 0x700),
+ (struct pllctl_regs *)(CLOCK_BASE + 0x300),
+ (struct pllctl_regs *)(CLOCK_BASE + 0x500),
+};
+
+#define pllctl_reg(pll, reg) (&(pllctl_regs[pll]->reg))
+#define pllctl_reg_read(pll, reg) __raw_readl(pllctl_reg(pll, reg))
+#define pllctl_reg_write(pll, reg, val) __raw_writel(val, pllctl_reg(pll, reg))
+
+#define pllctl_reg_rmw(pll, reg, mask, val) \
+ pllctl_reg_write(pll, reg, \
+ (pllctl_reg_read(pll, reg) & ~(mask)) | val)
+
+#define pllctl_reg_setbits(pll, reg, mask) \
+ pllctl_reg_rmw(pll, reg, 0, mask)
+
+#define pllctl_reg_clrbits(pll, reg, mask) \
+ pllctl_reg_rmw(pll, reg, mask, 0)
+
+/* PLLCTL Bits */
+#define PLLCTL_CLKMODE BIT(8)
+#define PLLCTL_PLLSELB BIT(7)
+#define PLLCTL_PLLENSRC BIT(5)
+#define PLLCTL_PLLDIS BIT(4)
+#define PLLCTL_PLLRST BIT(3)
+#define PLLCTL_PLLPWRDN BIT(1)
+#define PLLCTL_PLLEN BIT(0)
+
+#define PLLDIV_ENABLE BIT(15)
+
+static int pll_div_offset[] = {
+#define div_offset(reg) offsetof(struct pllctl_regs, reg)
+ div_offset(div1), div_offset(div2), div_offset(div3),
+ div_offset(div4), div_offset(div5), div_offset(div6),
+ div_offset(div7), div_offset(div8),
+};
+
+static unsigned long pll_bypass_mask[] = { 1, 4, 2 };
+static unsigned long pll_div_mask[] = { 0x01ff, 0x00ff, 0x00ff };
+
+/* Mappings from PLL+DIV to subsystem clocks */
+#define sys_arm1176_clk {SYS_PLL, 0}
+#define sys_dsp_clk {SYS_PLL, 1}
+#define sys_ddr_clk {SYS_PLL, 2}
+#define sys_full_clk {SYS_PLL, 3}
+#define sys_lcd_clk {SYS_PLL, 4}
+#define sys_vlynq_ref_clk {SYS_PLL, 5}
+#define sys_tsc_clk {SYS_PLL, 6}
+#define sys_half_clk {SYS_PLL, 7}
+
+#define eth_clk_5 {ETH_PLL, 0}
+#define eth_clk_50 {ETH_PLL, 1}
+#define eth_clk_125 {ETH_PLL, 2}
+#define eth_clk_250 {ETH_PLL, 3}
+#define eth_clk_25 {ETH_PLL, 4}
+
+#define tdm_clk {TDM_PLL, 0}
+#define tdm_extra_clk {TDM_PLL, 1}
+#define tdm1_clk {TDM_PLL, 2}
+
+/* Optimization barrier */
+#define barrier() \
+ __asm__ __volatile__("mov r0, r0\n" : : : "memory");
+
+static const struct lpsc_map lpsc_clk_map[] = {
+ [TNETV107X_LPSC_ARM] = sys_arm1176_clk,
+ [TNETV107X_LPSC_GEM] = sys_dsp_clk,
+ [TNETV107X_LPSC_DDR2_PHY] = sys_ddr_clk,
+ [TNETV107X_LPSC_TPCC] = sys_full_clk,
+ [TNETV107X_LPSC_TPTC0] = sys_full_clk,
+ [TNETV107X_LPSC_TPTC1] = sys_full_clk,
+ [TNETV107X_LPSC_RAM] = sys_full_clk,
+ [TNETV107X_LPSC_MBX_LITE] = sys_arm1176_clk,
+ [TNETV107X_LPSC_LCD] = sys_lcd_clk,
+ [TNETV107X_LPSC_ETHSS] = eth_clk_125,
+ [TNETV107X_LPSC_AEMIF] = sys_full_clk,
+ [TNETV107X_LPSC_CHIP_CFG] = sys_half_clk,
+ [TNETV107X_LPSC_TSC] = sys_tsc_clk,
+ [TNETV107X_LPSC_ROM] = sys_half_clk,
+ [TNETV107X_LPSC_UART2] = sys_half_clk,
+ [TNETV107X_LPSC_PKTSEC] = sys_half_clk,
+ [TNETV107X_LPSC_SECCTL] = sys_half_clk,
+ [TNETV107X_LPSC_KEYMGR] = sys_half_clk,
+ [TNETV107X_LPSC_KEYPAD] = sys_half_clk,
+ [TNETV107X_LPSC_GPIO] = sys_half_clk,
+ [TNETV107X_LPSC_MDIO] = sys_half_clk,
+ [TNETV107X_LPSC_SDIO0] = sys_half_clk,
+ [TNETV107X_LPSC_UART0] = sys_half_clk,
+ [TNETV107X_LPSC_UART1] = sys_half_clk,
+ [TNETV107X_LPSC_TIMER0] = sys_half_clk,
+ [TNETV107X_LPSC_TIMER1] = sys_half_clk,
+ [TNETV107X_LPSC_WDT_ARM] = sys_half_clk,
+ [TNETV107X_LPSC_WDT_DSP] = sys_half_clk,
+ [TNETV107X_LPSC_SSP] = sys_half_clk,
+ [TNETV107X_LPSC_TDM0] = tdm_clk,
+ [TNETV107X_LPSC_VLYNQ] = sys_vlynq_ref_clk,
+ [TNETV107X_LPSC_MCDMA] = sys_half_clk,
+ [TNETV107X_LPSC_USB0] = sys_half_clk,
+ [TNETV107X_LPSC_TDM1] = tdm1_clk,
+ [TNETV107X_LPSC_DEBUGSS] = sys_half_clk,
+ [TNETV107X_LPSC_ETHSS_RGMII] = eth_clk_250,
+ [TNETV107X_LPSC_SYSTEM] = sys_half_clk,
+ [TNETV107X_LPSC_IMCOP] = sys_dsp_clk,
+ [TNETV107X_LPSC_SPARE] = sys_half_clk,
+ [TNETV107X_LPSC_SDIO1] = sys_half_clk,
+ [TNETV107X_LPSC_USB1] = sys_half_clk,
+ [TNETV107X_LPSC_USBSS] = sys_half_clk,
+ [TNETV107X_LPSC_DDR2_EMIF1_VRST] = sys_ddr_clk,
+ [TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST] = sys_ddr_clk,
+};
+
+static const unsigned long pll_ext_freq[] = {
+ [SYS_PLL] = CONFIG_PLL_SYS_EXT_FREQ,
+ [ETH_PLL] = CONFIG_PLL_ETH_EXT_FREQ,
+ [TDM_PLL] = CONFIG_PLL_TDM_EXT_FREQ,
+};
+
+static unsigned long pll_freq_get(int pll)
+{
+ unsigned long mult = 1, prediv = 1, postdiv = 1;
+ unsigned long ref = CONFIG_SYS_INT_OSC_FREQ;
+ unsigned long ret;
+ u32 bypass;
+
+ bypass = __raw_readl((u32 *)(CLOCK_BASE));
+ if (!(bypass & pll_bypass_mask[pll])) {
+ mult = sspll_reg_read(pll, mult_factor);
+ prediv = sspll_reg_read(pll, prediv) + 1;
+ postdiv = sspll_reg_read(pll, postdiv) + 1;
+ }
+
+ if (pllctl_reg_read(pll, ctl) & PLLCTL_CLKMODE)
+ ref = pll_ext_freq[pll];
+
+ if (!(pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN))
+ return ref;
+
+ ret = (unsigned long)(ref + ((unsigned long long)ref * mult) / 256);
+ ret /= (prediv * postdiv);
+
+ return ret;
+}
+
+static unsigned long __pll_div_freq_get(int pll, unsigned int fpll,
+ int div)
+{
+ int divider = 1;
+ unsigned long divreg;
+
+ divreg = __raw_readl((void *)pllctl_regs[pll] + pll_div_offset[div]);
+
+ if (divreg & PLLDIV_ENABLE)
+ divider = (divreg & pll_div_mask[pll]) + 1;
+
+ return fpll / divider;
+}
+
+static unsigned long pll_div_freq_get(int pll, int div)
+{
+ unsigned int fpll = pll_freq_get(pll);
+
+ return __pll_div_freq_get(pll, fpll, div);
+}
+
+static void __pll_div_freq_set(int pll, unsigned int fpll, int div,
+ unsigned long hz)
+{
+ int divider = (fpll / hz - 1);
+
+ divider &= pll_div_mask[pll];
+ divider |= PLLDIV_ENABLE;
+
+ __raw_writel(divider, (void *)pllctl_regs[pll] + pll_div_offset[div]);
+ pllctl_reg_setbits(pll, alnctl, (1 << div));
+ pllctl_reg_setbits(pll, dchange, (1 << div));
+}
+
+static unsigned long pll_div_freq_set(int pll, int div, unsigned long hz)
+{
+ unsigned int fpll = pll_freq_get(pll);
+
+ __pll_div_freq_set(pll, fpll, div, hz);
+
+ pllctl_reg_write(pll, cmd, 1);
+
+ /* Wait until new divider takes effect */
+ while (pllctl_reg_read(pll, stat) & 0x01);
+
+ return __pll_div_freq_get(pll, fpll, div);
+}
+
+unsigned long clk_get_rate(unsigned int clk)
+{
+ return pll_div_freq_get(lpsc_clk_map[clk].pll, lpsc_clk_map[clk].div);
+}
+
+unsigned long clk_round_rate(unsigned int clk, unsigned long hz)
+{
+ unsigned long fpll, divider, pll;
+
+ pll = lpsc_clk_map[clk].pll;
+ fpll = pll_freq_get(pll);
+ divider = (fpll / hz - 1);
+ divider &= pll_div_mask[pll];
+
+ return fpll / (divider + 1);
+}
+
+int clk_set_rate(unsigned int clk, unsigned long _hz)
+{
+ unsigned long hz;
+
+ hz = clk_round_rate(clk, _hz);
+ if (hz != _hz)
+ return -EINVAL; /* Cannot set to target freq */
+
+ pll_div_freq_set(lpsc_clk_map[clk].pll, lpsc_clk_map[clk].div, hz);
+ return 0;
+}
+
+void lpsc_control(int mod, unsigned long state, int lrstz)
+{
+ u32 mdctl;
+
+ mdctl = psc_reg_read(PSC_MDCTL(mod));
+ mdctl &= ~0x1f;
+ mdctl |= state;
+
+ if (lrstz == 0)
+ mdctl &= ~PSC_MDCTL_LRSTZ;
+ else if (lrstz == 1)
+ mdctl |= PSC_MDCTL_LRSTZ;
+
+ psc_reg_write(PSC_MDCTL(mod), mdctl);
+
+ psc_reg_write(PSC_PTCMD, 1);
+
+ /* wait for power domain transition to end */
+ while (psc_reg_read(PSC_PTSTAT) & 1);
+
+ /* Wait for module state change */
+ while ((psc_reg_read(PSC_MDSTAT(mod)) & 0x1f) != state);
+}
+
+int lpsc_status(unsigned int id)
+{
+ return psc_reg_read(PSC_MDSTAT(id)) & 0x1f;
+}
+
+static void init_pll(const struct pll_init_data *data)
+{
+ unsigned long fpll;
+ unsigned long best_pre = 0, best_post = 0, best_mult = 0;
+ unsigned long div, prediv, postdiv, mult;
+ unsigned long delta, actual;
+ long best_delta = -1;
+ int i;
+ u32 tmp;
+
+ if (data->pll == SYS_PLL)
+ return; /* cannot reconfigure system pll on the fly */
+
+ tmp = pllctl_reg_read(data->pll, ctl);
+ if (data->internal_osc) {
+ tmp &= ~PLLCTL_CLKMODE;
+ fpll = CONFIG_SYS_INT_OSC_FREQ;
+ } else {
+ tmp |= PLLCTL_CLKMODE;
+ fpll = pll_ext_freq[data->pll];
+ }
+ pllctl_reg_write(data->pll, ctl, tmp);
+
+ mult = data->pll_freq / fpll;
+ for (mult = MAX(mult, 1); mult <= MAX_MULT; mult++) {
+ div = (fpll * mult) / data->pll_freq;
+ if (div < 1 || div > MAX_DIV)
+ continue;
+
+ for (postdiv = 1; postdiv <= min(div, MAX_POSTDIV); postdiv++) {
+ prediv = div / postdiv;
+ if (prediv < 1 || prediv > MAX_PREDIV)
+ continue;
+
+ actual = (fpll / prediv) * (mult / postdiv);
+ delta = (actual - data->pll_freq);
+ if (delta < 0)
+ delta = -delta;
+ if ((delta < best_delta) || (best_delta == -1)) {
+ best_delta = delta;
+ best_mult = mult;
+ best_pre = prediv;
+ best_post = postdiv;
+ if (delta == 0)
+ goto done;
+ }
+ }
+ }
+done:
+
+ if (best_delta == -1) {
+ printf("pll cannot derive %lu from %lu\n",
+ data->pll_freq, fpll);
+ return;
+ }
+
+ fpll = fpll * best_mult;
+ fpll /= best_pre * best_post;
+
+ pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLENSRC);
+ pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN);
+
+ pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST);
+
+ pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN);
+ pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLDIS);
+
+ sspll_reg_write(data->pll, mult_factor, (best_mult - 1) << 8);
+ sspll_reg_write(data->pll, prediv, best_pre - 1);
+ sspll_reg_write(data->pll, postdiv, best_post - 1);
+
+ for (i = 0; i < 10; i++)
+ if (data->div_freq[i])
+ __pll_div_freq_set(data->pll, fpll, i,
+ data->div_freq[i]);
+
+ pllctl_reg_write(data->pll, cmd, 1);
+
+ /* Wait until pll "go" operation completes */
+ while (pllctl_reg_read(data->pll, stat) & 0x01);
+
+ pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST);
+ pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN);
+}
+
+void init_plls(int num_pll, struct pll_init_data *config)
+{
+ int i;
+
+ for (i = 0; i < num_pll; i++)
+ init_pll(&config[i]);
+}
diff --git a/arch/arm/cpu/arm1176/tnetv107x/init.c b/arch/arm/cpu/arm1176/tnetv107x/init.c
new file mode 100644
index 0000000..ce3a025
--- /dev/null
+++ b/arch/arm/cpu/arm1176/tnetv107x/init.c
@@ -0,0 +1,37 @@
+/*
+ * TNETV107X: Architecture initialization
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+void chip_configuration_unlock(void)
+{
+ __raw_writel(TNETV107X_KICK0_MAGIC, TNETV107X_KICK0);
+ __raw_writel(TNETV107X_KICK1_MAGIC, TNETV107X_KICK1);
+}
+
+int arch_cpu_init(void)
+{
+ icache_enable();
+ chip_configuration_unlock();
+
+ return 0;
+}
diff --git a/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S b/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S
new file mode 100644
index 0000000..3ee32ef
--- /dev/null
+++ b/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S
@@ -0,0 +1,25 @@
+/*
+ * TNETV107X: Low-level pre-relocation initialization
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+.globl lowlevel_init
+lowlevel_init:
+ /* nothing for now, maybe needed for more exotic boot modes */
+ mov pc, lr
diff --git a/arch/arm/cpu/arm1176/tnetv107x/mux.c b/arch/arm/cpu/arm1176/tnetv107x/mux.c
new file mode 100644
index 0000000..ccc5314
--- /dev/null
+++ b/arch/arm/cpu/arm1176/tnetv107x/mux.c
@@ -0,0 +1,334 @@
+/*
+ * TNETV107X: Pinmux configuration
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/mux.h>
+
+#define MUX_MODE_1 0x00
+#define MUX_MODE_2 0x04
+#define MUX_MODE_3 0x0c
+#define MUX_MODE_4 0x1c
+
+#define MUX_DEBUG 0
+
+static const struct pin_config pin_table[] = {
+ /* reg shift mode */
+ TNETV107X_MUX_CFG(0, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(0, 0, MUX_MODE_2),
+ TNETV107X_MUX_CFG(0, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(0, 5, MUX_MODE_2),
+ TNETV107X_MUX_CFG(0, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(0, 10, MUX_MODE_2),
+ TNETV107X_MUX_CFG(0, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(0, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(0, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(0, 20, MUX_MODE_2),
+ TNETV107X_MUX_CFG(0, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(0, 25, MUX_MODE_2),
+ TNETV107X_MUX_CFG(1, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(1, 0, MUX_MODE_2),
+ TNETV107X_MUX_CFG(1, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(1, 5, MUX_MODE_2),
+ TNETV107X_MUX_CFG(1, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(1, 10, MUX_MODE_2),
+ TNETV107X_MUX_CFG(1, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(1, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(1, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(1, 20, MUX_MODE_2),
+ TNETV107X_MUX_CFG(1, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(1, 25, MUX_MODE_2),
+ TNETV107X_MUX_CFG(2, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(2, 0, MUX_MODE_2),
+ TNETV107X_MUX_CFG(2, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(2, 5, MUX_MODE_2),
+ TNETV107X_MUX_CFG(2, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(2, 10, MUX_MODE_2),
+ TNETV107X_MUX_CFG(2, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(2, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(2, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(2, 20, MUX_MODE_2),
+ TNETV107X_MUX_CFG(2, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(2, 25, MUX_MODE_2),
+ TNETV107X_MUX_CFG(3, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(3, 0, MUX_MODE_2),
+ TNETV107X_MUX_CFG(3, 0, MUX_MODE_4),
+ TNETV107X_MUX_CFG(3, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(3, 5, MUX_MODE_2),
+ TNETV107X_MUX_CFG(3, 5, MUX_MODE_4),
+ TNETV107X_MUX_CFG(3, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(3, 10, MUX_MODE_2),
+ TNETV107X_MUX_CFG(3, 10, MUX_MODE_4),
+ TNETV107X_MUX_CFG(3, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(3, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(3, 15, MUX_MODE_4),
+ TNETV107X_MUX_CFG(3, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(3, 20, MUX_MODE_2),
+ TNETV107X_MUX_CFG(3, 20, MUX_MODE_4),
+ TNETV107X_MUX_CFG(3, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(3, 25, MUX_MODE_2),
+ TNETV107X_MUX_CFG(3, 25, MUX_MODE_4),
+ TNETV107X_MUX_CFG(4, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(4, 0, MUX_MODE_2),
+ TNETV107X_MUX_CFG(4, 0, MUX_MODE_4),
+ TNETV107X_MUX_CFG(4, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(4, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(4, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(4, 15, MUX_MODE_4),
+ TNETV107X_MUX_CFG(4, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(4, 20, MUX_MODE_3),
+ TNETV107X_MUX_CFG(4, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(4, 25, MUX_MODE_4),
+ TNETV107X_MUX_CFG(5, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(5, 0, MUX_MODE_4),
+ TNETV107X_MUX_CFG(5, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(5, 5, MUX_MODE_4),
+ TNETV107X_MUX_CFG(5, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(5, 10, MUX_MODE_4),
+ TNETV107X_MUX_CFG(5, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(5, 15, MUX_MODE_4),
+ TNETV107X_MUX_CFG(5, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(5, 20, MUX_MODE_4),
+ TNETV107X_MUX_CFG(5, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(5, 25, MUX_MODE_4),
+ TNETV107X_MUX_CFG(6, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(6, 0, MUX_MODE_4),
+ TNETV107X_MUX_CFG(6, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(6, 5, MUX_MODE_4),
+ TNETV107X_MUX_CFG(6, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(6, 10, MUX_MODE_4),
+ TNETV107X_MUX_CFG(6, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(6, 15, MUX_MODE_4),
+ TNETV107X_MUX_CFG(6, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(6, 20, MUX_MODE_4),
+ TNETV107X_MUX_CFG(6, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(6, 25, MUX_MODE_4),
+ TNETV107X_MUX_CFG(7, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(7, 0, MUX_MODE_4),
+ TNETV107X_MUX_CFG(7, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(7, 5, MUX_MODE_4),
+ TNETV107X_MUX_CFG(7, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(7, 10, MUX_MODE_4),
+ TNETV107X_MUX_CFG(7, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(7, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(7, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(7, 20, MUX_MODE_2),
+ TNETV107X_MUX_CFG(7, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(7, 25, MUX_MODE_2),
+ TNETV107X_MUX_CFG(8, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(8, 0, MUX_MODE_2),
+ TNETV107X_MUX_CFG(8, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(8, 5, MUX_MODE_2),
+ TNETV107X_MUX_CFG(8, 5, MUX_MODE_4),
+ TNETV107X_MUX_CFG(8, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(8, 10, MUX_MODE_2),
+ TNETV107X_MUX_CFG(9, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(9, 0, MUX_MODE_2),
+ TNETV107X_MUX_CFG(9, 0, MUX_MODE_4),
+ TNETV107X_MUX_CFG(9, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(9, 5, MUX_MODE_2),
+ TNETV107X_MUX_CFG(9, 5, MUX_MODE_4),
+ TNETV107X_MUX_CFG(9, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(9, 10, MUX_MODE_2),
+ TNETV107X_MUX_CFG(9, 10, MUX_MODE_4),
+ TNETV107X_MUX_CFG(9, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(9, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(9, 15, MUX_MODE_4),
+ TNETV107X_MUX_CFG(9, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(9, 20, MUX_MODE_2),
+ TNETV107X_MUX_CFG(9, 20, MUX_MODE_4),
+ TNETV107X_MUX_CFG(10, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(10, 0, MUX_MODE_2),
+ TNETV107X_MUX_CFG(10, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(10, 5, MUX_MODE_2),
+ TNETV107X_MUX_CFG(10, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(10, 10, MUX_MODE_2),
+ TNETV107X_MUX_CFG(10, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(10, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(10, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(10, 20, MUX_MODE_2),
+ TNETV107X_MUX_CFG(10, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(10, 25, MUX_MODE_2),
+ TNETV107X_MUX_CFG(11, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(11, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(12, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(12, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(12, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(12, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(12, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(12, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(13, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(13, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(13, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(13, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(14, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(14, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(14, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(14, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(14, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(14, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(15, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(15, 0, MUX_MODE_2),
+ TNETV107X_MUX_CFG(15, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(15, 5, MUX_MODE_2),
+ TNETV107X_MUX_CFG(15, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(15, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(15, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(15, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(16, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(16, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(16, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(16, 10, MUX_MODE_2),
+ TNETV107X_MUX_CFG(16, 10, MUX_MODE_3),
+ TNETV107X_MUX_CFG(16, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(16, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(17, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(17, 0, MUX_MODE_2),
+ TNETV107X_MUX_CFG(17, 0, MUX_MODE_3),
+ TNETV107X_MUX_CFG(17, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(17, 5, MUX_MODE_2),
+ TNETV107X_MUX_CFG(17, 5, MUX_MODE_3),
+ TNETV107X_MUX_CFG(17, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(17, 10, MUX_MODE_2),
+ TNETV107X_MUX_CFG(17, 10, MUX_MODE_3),
+ TNETV107X_MUX_CFG(17, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(17, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(17, 15, MUX_MODE_3),
+ TNETV107X_MUX_CFG(18, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(18, 0, MUX_MODE_2),
+ TNETV107X_MUX_CFG(18, 0, MUX_MODE_3),
+ TNETV107X_MUX_CFG(18, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(18, 5, MUX_MODE_2),
+ TNETV107X_MUX_CFG(18, 5, MUX_MODE_3),
+ TNETV107X_MUX_CFG(18, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(18, 10, MUX_MODE_2),
+ TNETV107X_MUX_CFG(18, 10, MUX_MODE_3),
+ TNETV107X_MUX_CFG(18, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(18, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(18, 15, MUX_MODE_3),
+ TNETV107X_MUX_CFG(19, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(19, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(19, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(19, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(19, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(19, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(20, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(20, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(20, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(20, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(20, 15, MUX_MODE_3),
+ TNETV107X_MUX_CFG(20, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(20, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(21, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(21, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(21, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(21, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(21, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(21, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(22, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(22, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(22, 5, MUX_MODE_3),
+ TNETV107X_MUX_CFG(22, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(22, 10, MUX_MODE_3),
+ TNETV107X_MUX_CFG(22, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(22, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(22, 15, MUX_MODE_3),
+ TNETV107X_MUX_CFG(22, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(22, 20, MUX_MODE_3),
+ TNETV107X_MUX_CFG(22, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(22, 25, MUX_MODE_3),
+ TNETV107X_MUX_CFG(23, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(23, 0, MUX_MODE_3),
+ TNETV107X_MUX_CFG(23, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(23, 5, MUX_MODE_3),
+ TNETV107X_MUX_CFG(23, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(23, 10, MUX_MODE_3),
+ TNETV107X_MUX_CFG(24, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(24, 0, MUX_MODE_2),
+ TNETV107X_MUX_CFG(24, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(24, 5, MUX_MODE_2),
+ TNETV107X_MUX_CFG(24, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(24, 10, MUX_MODE_2),
+ TNETV107X_MUX_CFG(24, 10, MUX_MODE_3),
+ TNETV107X_MUX_CFG(24, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(24, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(24, 15, MUX_MODE_3),
+ TNETV107X_MUX_CFG(24, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(24, 20, MUX_MODE_2),
+ TNETV107X_MUX_CFG(24, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(24, 25, MUX_MODE_2),
+ TNETV107X_MUX_CFG(25, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(25, 0, MUX_MODE_2),
+ TNETV107X_MUX_CFG(25, 0, MUX_MODE_3),
+ TNETV107X_MUX_CFG(25, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(25, 5, MUX_MODE_2),
+ TNETV107X_MUX_CFG(25, 5, MUX_MODE_3),
+ TNETV107X_MUX_CFG(25, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(25, 10, MUX_MODE_2),
+ TNETV107X_MUX_CFG(25, 10, MUX_MODE_3),
+ TNETV107X_MUX_CFG(25, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(25, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(25, 15, MUX_MODE_3),
+ TNETV107X_MUX_CFG(25, 15, MUX_MODE_4),
+ TNETV107X_MUX_CFG(26, 0, MUX_MODE_1),
+ TNETV107X_MUX_CFG(26, 5, MUX_MODE_1),
+ TNETV107X_MUX_CFG(26, 10, MUX_MODE_1),
+ TNETV107X_MUX_CFG(26, 10, MUX_MODE_2),
+ TNETV107X_MUX_CFG(26, 15, MUX_MODE_1),
+ TNETV107X_MUX_CFG(26, 15, MUX_MODE_2),
+ TNETV107X_MUX_CFG(26, 20, MUX_MODE_1),
+ TNETV107X_MUX_CFG(26, 20, MUX_MODE_2),
+ TNETV107X_MUX_CFG(26, 25, MUX_MODE_1),
+ TNETV107X_MUX_CFG(26, 25, MUX_MODE_2),
+};
+
+const int pin_table_size = sizeof(pin_table) / sizeof(pin_table[0]);
+
+int mux_select_pin(short index)
+{
+ const struct pin_config *cfg;
+ unsigned long mask, mode, reg;
+
+ if (index >= pin_table_size)
+ return 0;
+
+ cfg = &pin_table[index];
+
+ mask = 0x1f << cfg->mask_offset;
+ mode = cfg->mode << cfg->mask_offset;
+
+ reg = __raw_readl(TNETV107X_PINMUX(cfg->reg_index));
+ reg = (reg & ~mask) | mode;
+ __raw_writel(reg, TNETV107X_PINMUX(cfg->reg_index));
+
+ return 1;
+}
+
+int mux_select_pins(const short *pins)
+{
+ int i, ret = 1;
+
+ for (i = 0; pins[i] >= 0; i++)
+ ret &= mux_select_pin(pins[i]);
+
+ return ret;
+}
diff --git a/arch/arm/cpu/arm1176/tnetv107x/timer.c b/arch/arm/cpu/arm1176/tnetv107x/timer.c
new file mode 100644
index 0000000..a7a400d
--- /dev/null
+++ b/arch/arm/cpu/arm1176/tnetv107x/timer.c
@@ -0,0 +1,122 @@
+/*
+ * TNETV107X: Timer implementation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+
+struct timer_regs {
+ u_int32_t pid12;
+ u_int32_t pad[3];
+ u_int32_t tim12;
+ u_int32_t tim34;
+ u_int32_t prd12;
+ u_int32_t prd34;
+ u_int32_t tcr;
+ u_int32_t tgcr;
+ u_int32_t wdtcr;
+};
+
+#define regs ((struct timer_regs *)CONFIG_SYS_TIMERBASE)
+
+#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)
+#define TIM_CLK_DIV 16
+
+static ulong timestamp;
+static ulong lastinc;
+
+int timer_init(void)
+{
+ clk_enable(TNETV107X_LPSC_TIMER0);
+
+ lastinc = timestamp = 0;
+
+ /* We are using timer34 in unchained 32-bit mode, full speed */
+ __raw_writel(0x0, &regs->tcr);
+ __raw_writel(0x0, &regs->tgcr);
+ __raw_writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &regs->tgcr);
+ __raw_writel(0x0, &regs->tim34);
+ __raw_writel(TIMER_LOAD_VAL, &regs->prd34);
+ __raw_writel(2 << 22, &regs->tcr);
+
+ return 0;
+}
+
+void reset_timer(void)
+{
+ lastinc = timestamp = 0;
+
+ __raw_writel(0, &regs->tcr);
+ __raw_writel(0, &regs->tim34);
+ __raw_writel(2 << 22, &regs->tcr);
+}
+
+static ulong get_timer_raw(void)
+{
+ ulong now = __raw_readl(&regs->tim34);
+
+ if (now >= lastinc)
+ timestamp += now - lastinc;
+ else
+ timestamp += now + TIMER_LOAD_VAL - lastinc;
+
+ lastinc = now;
+
+ return timestamp;
+}
+
+ulong get_timer(ulong base)
+{
+ return (get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base;
+}
+
+void set_timer(ulong t)
+{
+ timestamp = t;
+}
+
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+void __udelay(unsigned long usec)
+{
+ ulong tmo;
+ ulong endtime;
+ signed long diff;
+
+ tmo = CONFIG_SYS_HZ_CLOCK / 1000;
+ tmo *= usec;
+ tmo /= (1000 * TIM_CLK_DIV);
+
+ endtime = get_timer_raw() + tmo;
+
+ do {
+ ulong now = get_timer_raw();
+ diff = endtime - now;
+ } while (diff >= 0);
+}
+
+ulong get_tbclk(void)
+{
+ return CONFIG_SYS_HZ;
+}
diff --git a/arch/arm/cpu/arm1176/tnetv107x/wdt.c b/arch/arm/cpu/arm1176/tnetv107x/wdt.c
new file mode 100644
index 0000000..18aadb0
--- /dev/null
+++ b/arch/arm/cpu/arm1176/tnetv107x/wdt.c
@@ -0,0 +1,180 @@
+/*
+ * TNETV107X: Watchdog timer implementation (for reset)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+
+#define MAX_DIV 0xFFFE0001
+
+struct wdt_regs {
+ u32 kick_lock;
+#define KICK_LOCK_1 0x5555
+#define KICK_LOCK_2 0xaaaa
+ u32 kick;
+
+ u32 change_lock;
+#define CHANGE_LOCK_1 0x6666
+#define CHANGE_LOCK_2 0xbbbb
+ u32 change;
+
+ u32 disable_lock;
+#define DISABLE_LOCK_1 0x7777
+#define DISABLE_LOCK_2 0xcccc
+#define DISABLE_LOCK_3 0xdddd
+ u32 disable;
+
+ u32 prescale_lock;
+#define PRESCALE_LOCK_1 0x5a5a
+#define PRESCALE_LOCK_2 0xa5a5
+ u32 prescale;
+};
+
+static struct wdt_regs* regs = (struct wdt_regs *)TNETV107X_WDT0_ARM_BASE;
+
+#define wdt_reg_read(reg) __raw_readl(&regs->reg)
+#define wdt_reg_write(reg, val) __raw_writel((val), &regs->reg)
+
+static int write_prescale_reg(unsigned long prescale_value)
+{
+ wdt_reg_write(prescale_lock, PRESCALE_LOCK_1);
+ if ((wdt_reg_read(prescale_lock) & 0x3) != 0x1)
+ return -1;
+
+ wdt_reg_write(prescale_lock, PRESCALE_LOCK_2);
+ if ((wdt_reg_read(prescale_lock) & 0x3) != 0x3)
+ return -1;
+
+ wdt_reg_write(prescale, prescale_value);
+
+ return 0;
+}
+
+static int write_change_reg(unsigned long initial_timer_value)
+{
+ wdt_reg_write(change_lock, CHANGE_LOCK_1);
+ if ((wdt_reg_read(change_lock) & 0x3) != 0x1)
+ return -1;
+
+ wdt_reg_write(change_lock, CHANGE_LOCK_2);
+ if ((wdt_reg_read(change_lock) & 0x3) != 0x3)
+ return -1;
+
+ wdt_reg_write(change, initial_timer_value);
+
+ return 0;
+}
+
+static int wdt_control(unsigned long disable_value)
+{
+ wdt_reg_write(disable_lock, DISABLE_LOCK_1);
+ if ((wdt_reg_read(disable_lock) & 0x3) != 0x1)
+ return -1;
+
+ wdt_reg_write(disable_lock, DISABLE_LOCK_2);
+ if ((wdt_reg_read(disable_lock) & 0x3) != 0x2)
+ return -1;
+
+ wdt_reg_write(disable_lock, DISABLE_LOCK_3);
+ if ((wdt_reg_read(disable_lock) & 0x3) != 0x3)
+ return -1;
+
+ wdt_reg_write(disable, disable_value);
+ return 0;
+}
+
+static int wdt_set_period(unsigned long msec)
+{
+ unsigned long change_value, count_value;
+ unsigned long prescale_value = 1;
+ unsigned long refclk_khz, maxdiv;
+ int ret;
+
+ refclk_khz = clk_get_rate(TNETV107X_LPSC_WDT_ARM);
+ maxdiv = (MAX_DIV / refclk_khz);
+
+ if ((!msec) || (msec > maxdiv))
+ return -1;
+
+ count_value = refclk_khz * msec;
+ if (count_value > 0xffff) {
+ change_value = count_value / 0xffff + 1;
+ prescale_value = count_value / change_value;
+ } else {
+ change_value = count_value;
+ }
+
+ ret = write_prescale_reg(prescale_value - 1);
+ if (ret)
+ return ret;
+
+ ret = write_change_reg(change_value);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+unsigned long last_wdt = -1;
+
+int wdt_start(unsigned long msecs)
+{
+ int ret;
+ ret = wdt_control(0);
+ if (ret)
+ return ret;
+ ret = wdt_set_period(msecs);
+ if (ret)
+ return ret;
+ ret = wdt_control(1);
+ if (ret)
+ return ret;
+ ret = wdt_kick();
+ last_wdt = msecs;
+ return ret;
+}
+
+int wdt_stop(void)
+{
+ last_wdt = -1;
+ return wdt_control(0);
+}
+
+int wdt_kick(void)
+{
+ wdt_reg_write(kick_lock, KICK_LOCK_1);
+ if ((wdt_reg_read(kick_lock) & 0x3) != 0x1)
+ return -1;
+
+ wdt_reg_write(kick_lock, KICK_LOCK_2);
+ if ((wdt_reg_read(kick_lock) & 0x3) != 0x3)
+ return -1;
+
+ wdt_reg_write(kick, 1);
+ return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+ clk_enable(TNETV107X_LPSC_WDT_ARM);
+ wdt_start(1);
+ wdt_kick();
+}
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/Makefile b/arch/arm/cpu/arm_cortexa8/omap3/Makefile
index 136b163..7d63c6b 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/Makefile
+++ b/arch/arm/cpu/arm_cortexa8/omap3/Makefile
@@ -37,8 +37,11 @@ COBJS += syslib.o
COBJS += sys_info.o
COBJS += timer.o
+COBJS-$(CONFIG_EMIF4) += emif4.o
+COBJS-$(CONFIG_SDRC) += sdrc.o
+
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS))
all: $(obj).depend $(LIB)
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/board.c b/arch/arm/cpu/arm_cortexa8/omap3/board.c
index 7b78fa4..d2500ca 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/board.c
+++ b/arch/arm/cpu/arm_cortexa8/omap3/board.c
@@ -40,8 +40,6 @@
extern omap3_sysinfo sysinfo;
-extern u32 is_mem_sdr(void);
-
/******************************************************************************
* Routine: delay
* Description: spinning delay to use before udelay works
@@ -233,7 +231,7 @@ void s_init(void)
per_clocks_enable();
if (!in_sdram)
- sdrc_init();
+ mem_init();
}
/******************************************************************************
@@ -274,36 +272,6 @@ void watchdog_init(void)
}
/******************************************************************************
- * Routine: dram_init
- * Description: sets uboots idea of sdram size
- *****************************************************************************/
-int dram_init(void)
-{
- DECLARE_GLOBAL_DATA_PTR;
- unsigned int size0 = 0, size1 = 0;
-
- /*
- * If a second bank of DDR is attached to CS1 this is
- * where it can be started. Early init code will init
- * memory on CS0.
- */
- if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) {
- do_sdrc_init(CS1, NOT_EARLY);
- make_cs1_contiguous();
- }
-
- size0 = get_sdr_cs_size(CS0);
- size1 = get_sdr_cs_size(CS1);
-
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = size0;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
- gd->bd->bi_dram[1].size = size1;
-
- return 0;
-}
-
-/******************************************************************************
* Dummy function to handle errors for EABI incompatibility
*****************************************************************************/
void abort(void)
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/emif4.c b/arch/arm/cpu/arm_cortexa8/omap3/emif4.c
new file mode 100644
index 0000000..fae5b11
--- /dev/null
+++ b/arch/arm/cpu/arm_cortexa8/omap3/emif4.c
@@ -0,0 +1,168 @@
+/*
+ * Author :
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Based on mem.c and sdrc.c
+ *
+ * Copyright (C) 2010
+ * Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/emif4.h>
+
+extern omap3_sysinfo sysinfo;
+
+static emif4_t *emif4_base = (emif4_t *)OMAP34XX_SDRC_BASE;
+
+/*
+ * is_mem_sdr -
+ * - Return 1 if mem type in use is SDR
+ */
+u32 is_mem_sdr(void)
+{
+ return 0;
+}
+
+/*
+ * get_sdr_cs_size -
+ * - Get size of chip select 0/1
+ */
+u32 get_sdr_cs_size(u32 cs)
+{
+ u32 size;
+
+ /* TODO: Calculate the size based on EMIF4 configuration */
+ size = CONFIG_SYS_CS0_SIZE;
+
+ return size;
+}
+
+/*
+ * get_sdr_cs_offset -
+ * - Get offset of cs from cs0 start
+ */
+u32 get_sdr_cs_offset(u32 cs)
+{
+ u32 offset = 0;
+
+ return offset;
+}
+
+/*
+ * do_emif4_init -
+ * - Init the emif4 module for DDR access
+ * - Early init routines, called from flash or SRAM.
+ */
+void do_emif4_init(void)
+{
+ unsigned int regval;
+ /* Set the DDR PHY parameters in PHY ctrl registers */
+ regval = (EMIF4_DDR1_READ_LAT | EMIF4_DDR1_PWRDN_DIS |
+ EMIF4_DDR1_EXT_STRB_DIS);
+ writel(regval, &emif4_base->ddr_phyctrl1);
+ writel(regval, &emif4_base->ddr_phyctrl1_shdw);
+ writel(0, &emif4_base->ddr_phyctrl2);
+
+ /* Reset the DDR PHY and wait till completed */
+ regval = readl(&emif4_base->sdram_iodft_tlgc);
+ regval |= (1<<10);
+ writel(regval, &emif4_base->sdram_iodft_tlgc);
+ /*Wait till that bit clears*/
+ while ((readl(&emif4_base->sdram_iodft_tlgc) & (1<<10)) == 0x1);
+ /*Re-verify the DDR PHY status*/
+ while ((readl(&emif4_base->sdram_sts) & (1<<2)) == 0x0);
+
+ regval |= (1<<0);
+ writel(regval, &emif4_base->sdram_iodft_tlgc);
+ /* Set SDR timing registers */
+ regval = (EMIF4_TIM1_T_WTR | EMIF4_TIM1_T_RRD |
+ EMIF4_TIM1_T_RC | EMIF4_TIM1_T_RAS |
+ EMIF4_TIM1_T_WR | EMIF4_TIM1_T_RCD |
+ EMIF4_TIM1_T_RP);
+ writel(regval, &emif4_base->sdram_time1);
+ writel(regval, &emif4_base->sdram_time1_shdw);
+
+ regval = (EMIF4_TIM2_T_CKE | EMIF4_TIM2_T_RTP |
+ EMIF4_TIM2_T_XSRD | EMIF4_TIM2_T_XSNR |
+ EMIF4_TIM2_T_ODT | EMIF4_TIM2_T_XP);
+ writel(regval, &emif4_base->sdram_time2);
+ writel(regval, &emif4_base->sdram_time2_shdw);
+
+ regval = (EMIF4_TIM3_T_RAS_MAX | EMIF4_TIM3_T_RFC);
+ writel(regval, &emif4_base->sdram_time3);
+ writel(regval, &emif4_base->sdram_time3_shdw);
+
+ /* Set the PWR control register */
+ regval = (EMIF4_PWR_PM_TIM | EMIF4_PWR_LP_MODE |
+ EMIF4_PWR_DPD_DIS | EMIF4_PWR_IDLE_MODE);
+ writel(regval, &emif4_base->sdram_pwr_mgmt);
+ writel(regval, &emif4_base->sdram_pwr_mgmt_shdw);
+
+ /* Set the DDR refresh rate control register */
+ regval = (EMIF4_REFRESH_RATE | EMIF4_INITREF_DIS);
+ writel(regval, &emif4_base->sdram_refresh_ctrl);
+ writel(regval, &emif4_base->sdram_refresh_ctrl_shdw);
+
+ /* set the SDRAM configuration register */
+ regval = (EMIF4_CFG_PGSIZE | EMIF4_CFG_EBANK |
+ EMIF4_CFG_IBANK | EMIF4_CFG_ROWSIZE |
+ EMIF4_CFG_CL | EMIF4_CFG_NARROW_MD |
+ EMIF4_CFG_SDR_DRV | EMIF4_CFG_DDR_DIS_DLL |
+ EMIF4_CFG_DDR2_DDQS | EMIF4_CFG_DDR_TERM |
+ EMIF4_CFG_IBANK_POS | EMIF4_CFG_SDRAM_TYP);
+ writel(regval, &emif4_base->sdram_config);
+}
+
+/*
+ * dram_init -
+ * - Sets uboots idea of sdram size
+ */
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int size0 = 0, size1 = 0;
+
+ size0 = get_sdr_cs_size(CS0);
+ /*
+ * If a second bank of DDR is attached to CS1 this is
+ * where it can be started. Early init code will init
+ * memory on CS0.
+ */
+ if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED))
+ size1 = get_sdr_cs_size(CS1);
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = size0;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
+ gd->bd->bi_dram[1].size = size1;
+
+ return 0;
+}
+
+/*
+ * mem_init() -
+ * - Initialize memory subsystem
+ */
+void mem_init(void)
+{
+ do_emif4_init();
+}
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/mem.c b/arch/arm/cpu/arm_cortexa8/omap3/mem.c
index dfb7e4c..bd914b0 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/mem.c
+++ b/arch/arm/cpu/arm_cortexa8/omap3/mem.c
@@ -79,26 +79,6 @@ static const u32 gpmc_onenand[GPMC_MAX_REG] = {
#endif
-static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE;
-
-/**************************************************************************
- * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
- * command line mem=xyz use all memory with out discontinuous support
- * compiled in. Could do it at the ATAG, but there really is two banks...
- * Called as part of 2nd phase DDR init.
- **************************************************************************/
-void make_cs1_contiguous(void)
-{
- u32 size, a_add_low, a_add_high;
-
- size = get_sdr_cs_size(CS0);
- size >>= 25; /* divide by 32 MiB to find size to offset CS1 */
- a_add_high = (size & 3) << 8; /* set up low field */
- a_add_low = (size & 0x3C) >> 2; /* set up high field */
- writel((a_add_high | a_add_low), &sdrc_base->cs_cfg);
-
-}
-
/********************************************************
* mem_ok() - test used to see if timings are correct
* for a part. Helps in guessing which part
@@ -123,76 +103,6 @@ u32 mem_ok(u32 cs)
return 1;
}
-/********************************************************
- * sdrc_init() - init the sdrc chip selects CS0 and CS1
- * - early init routines, called from flash or
- * SRAM.
- *******************************************************/
-void sdrc_init(void)
-{
- /* only init up first bank here */
- do_sdrc_init(CS0, EARLY_INIT);
-}
-
-/*************************************************************************
- * do_sdrc_init(): initialize the SDRAM for use.
- * -code sets up SDRAM basic SDRC timings for CS0
- * -optimal settings can be placed here, or redone after i2c
- * inspection of board info
- *
- * - code called once in C-Stack only context for CS0 and a possible 2nd
- * time depending on memory configuration from stack+global context
- **************************************************************************/
-
-void do_sdrc_init(u32 cs, u32 early)
-{
- struct sdrc_actim *sdrc_actim_base;
-
- if(cs)
- sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE;
- else
- sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
-
- if (early) {
- /* reset sdrc controller */
- writel(SOFTRESET, &sdrc_base->sysconfig);
- wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status,
- 12000000);
- writel(0, &sdrc_base->sysconfig);
-
- /* setup sdrc to ball mux */
- writel(SDRC_SHARING, &sdrc_base->sharing);
-
- /* Disable Power Down of CKE cuz of 1 CKE on combo part */
- writel(WAKEUPPROC | PWDNEN | SRFRONRESET | PAGEPOLICY_HIGH,
- &sdrc_base->power);
-
- writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl);
- sdelay(0x20000);
- }
-
- writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY |
- RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 |
- DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg);
- writel(ARCV | ARE_ARCV_1, &sdrc_base->cs[cs].rfr_ctrl);
- writel(V_ACTIMA_165, &sdrc_actim_base->ctrla);
- writel(V_ACTIMB_165, &sdrc_actim_base->ctrlb);
-
- writel(CMD_NOP, &sdrc_base ->cs[cs].manual);
- writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
- writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
- writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
-
- /*
- * CAS latency 3, Write Burst = Read Burst, Serial Mode,
- * Burst length = 4
- */
- writel(CASL3 | BURSTLENGTH4, &sdrc_base->cs[cs].mr);
-
- if (!mem_ok(cs))
- writel(0, &sdrc_base->cs[cs].mcfg);
-}
-
void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
u32 size)
{
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/sdrc.c b/arch/arm/cpu/arm_cortexa8/omap3/sdrc.c
new file mode 100644
index 0000000..96fd990c
--- /dev/null
+++ b/arch/arm/cpu/arm_cortexa8/omap3/sdrc.c
@@ -0,0 +1,202 @@
+/*
+ * Functions related to OMAP3 SDRC.
+ *
+ * This file has been created after exctracting and consolidating
+ * the SDRC related content from mem.c and board.c, also created
+ * generic init function (mem_init).
+ *
+ * Copyright (C) 2004-2010
+ * Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author :
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Original implementation by (mem.c, board.c) :
+ * Sunil Kumar <sunilsaini05@gmail.com>
+ * Shashi Ranjan <shashiranjanmca05@gmail.com>
+ * Manikandan Pillai <mani.pillai@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+
+extern omap3_sysinfo sysinfo;
+
+static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE;
+
+/*
+ * is_mem_sdr -
+ * - Return 1 if mem type in use is SDR
+ */
+u32 is_mem_sdr(void)
+{
+ if (readl(&sdrc_base->cs[CS0].mr) == SDRC_MR_0_SDR)
+ return 1;
+ return 0;
+}
+
+/*
+ * make_cs1_contiguous -
+ * - For es2 and above remap cs1 behind cs0 to allow command line
+ * mem=xyz use all memory with out discontinuous support compiled in.
+ * Could do it at the ATAG, but there really is two banks...
+ * - Called as part of 2nd phase DDR init.
+ */
+void make_cs1_contiguous(void)
+{
+ u32 size, a_add_low, a_add_high;
+
+ size = get_sdr_cs_size(CS0);
+ size >>= 25; /* divide by 32 MiB to find size to offset CS1 */
+ a_add_high = (size & 3) << 8; /* set up low field */
+ a_add_low = (size & 0x3C) >> 2; /* set up high field */
+ writel((a_add_high | a_add_low), &sdrc_base->cs_cfg);
+
+}
+
+
+/*
+ * get_sdr_cs_size -
+ * - Get size of chip select 0/1
+ */
+u32 get_sdr_cs_size(u32 cs)
+{
+ u32 size;
+
+ /* get ram size field */
+ size = readl(&sdrc_base->cs[cs].mcfg) >> 8;
+ size &= 0x3FF; /* remove unwanted bits */
+ size <<= 21; /* multiply by 2 MiB to find size in MB */
+ return size;
+}
+
+/*
+ * get_sdr_cs_offset -
+ * - Get offset of cs from cs0 start
+ */
+u32 get_sdr_cs_offset(u32 cs)
+{
+ u32 offset;
+
+ if (!cs)
+ return 0;
+
+ offset = readl(&sdrc_base->cs_cfg);
+ offset = (offset & 15) << 27 | (offset & 0x30) >> 17;
+
+ return offset;
+}
+
+/*
+ * do_sdrc_init -
+ * - Initialize the SDRAM for use.
+ * - Sets up SDRC timings for CS0
+ * - code called once in C-Stack only context for CS0 and a possible 2nd
+ * time depending on memory configuration from stack+global context
+ */
+void do_sdrc_init(u32 cs, u32 early)
+{
+ struct sdrc_actim *sdrc_actim_base;
+
+ if (cs)
+ sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE;
+ else
+ sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
+
+ if (early) {
+ /* reset sdrc controller */
+ writel(SOFTRESET, &sdrc_base->sysconfig);
+ wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status,
+ 12000000);
+ writel(0, &sdrc_base->sysconfig);
+
+ /* setup sdrc to ball mux */
+ writel(SDRC_SHARING, &sdrc_base->sharing);
+
+ /* Disable Power Down of CKE cuz of 1 CKE on combo part */
+ writel(WAKEUPPROC | SRFRONRESET | PAGEPOLICY_HIGH,
+ &sdrc_base->power);
+
+ writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl);
+ sdelay(0x20000);
+ }
+
+ writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY |
+ RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 |
+ DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg);
+ writel(ARCV | ARE_ARCV_1, &sdrc_base->cs[cs].rfr_ctrl);
+ writel(V_ACTIMA_165, &sdrc_actim_base->ctrla);
+ writel(V_ACTIMB_165, &sdrc_actim_base->ctrlb);
+
+ writel(CMD_NOP, &sdrc_base->cs[cs].manual);
+ writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
+ writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+ writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+
+ /*
+ * CAS latency 3, Write Burst = Read Burst, Serial Mode,
+ * Burst length = 4
+ */
+ writel(CASL3 | BURSTLENGTH4, &sdrc_base->cs[cs].mr);
+
+ if (!mem_ok(cs))
+ writel(0, &sdrc_base->cs[cs].mcfg);
+}
+
+/*
+ * dram_init -
+ * - Sets uboots idea of sdram size
+ */
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int size0 = 0, size1 = 0;
+
+ size0 = get_sdr_cs_size(CS0);
+ /*
+ * If a second bank of DDR is attached to CS1 this is
+ * where it can be started. Early init code will init
+ * memory on CS0.
+ */
+ if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) {
+ do_sdrc_init(CS1, NOT_EARLY);
+ make_cs1_contiguous();
+
+ size1 = get_sdr_cs_size(CS1);
+ }
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = size0;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
+ gd->bd->bi_dram[1].size = size1;
+
+ return 0;
+}
+
+/*
+ * mem_init -
+ * - Init the sdrc chip,
+ * - Selects CS0 and CS1,
+ */
+void mem_init(void)
+{
+ /* only init up first bank here */
+ do_sdrc_init(CS0, EARLY_INIT);
+}
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c b/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c
index 08fb32e..1df4401 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c
+++ b/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c
@@ -32,7 +32,6 @@
#include <i2c.h>
extern omap3_sysinfo sysinfo;
-static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE;
static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
static char *rev_s[CPU_3XX_MAX_REV] = {
"1.0",
@@ -104,46 +103,6 @@ u32 get_cpu_rev(void)
}
}
-/****************************************************
- * is_mem_sdr() - return 1 if mem type in use is SDR
- ****************************************************/
-u32 is_mem_sdr(void)
-{
- if (readl(&sdrc_base->cs[CS0].mr) == SDRC_MR_0_SDR)
- return 1;
- return 0;
-}
-
-/***********************************************************************
- * get_cs0_size() - get size of chip select 0/1
- ************************************************************************/
-u32 get_sdr_cs_size(u32 cs)
-{
- u32 size;
-
- /* get ram size field */
- size = readl(&sdrc_base->cs[cs].mcfg) >> 8;
- size &= 0x3FF; /* remove unwanted bits */
- size <<= 21; /* multiply by 2 MiB to find size in MB */
- return size;
-}
-
-/***********************************************************************
- * get_sdr_cs_offset() - get offset of cs from cs0 start
- ************************************************************************/
-u32 get_sdr_cs_offset(u32 cs)
-{
- u32 offset;
-
- if (!cs)
- return 0;
-
- offset = readl(&sdrc_base->cs_cfg);
- offset = (offset & 15) << 27 | (offset & 0x30) >> 17;
-
- return offset;
-}
-
/***************************************************************************
* get_gpmc0_base() - Return current address hardware will be
* fetching from. The below effectively gives what is correct, its a bit
diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h
index aa8de32..c072c27 100644
--- a/arch/arm/include/asm/arch-omap3/cpu.h
+++ b/arch/arm/include/asm/arch-omap3/cpu.h
@@ -215,6 +215,31 @@ struct sdrc {
u8 res4[0xC];
struct sdrc_cs cs[2]; /* 0x80 || 0xB0 */
};
+
+/* EMIF4 */
+typedef struct emif4 {
+ unsigned int sdram_sts;
+ unsigned int sdram_config;
+ unsigned int res1;
+ unsigned int sdram_refresh_ctrl;
+ unsigned int sdram_refresh_ctrl_shdw;
+ unsigned int sdram_time1;
+ unsigned int sdram_time1_shdw;
+ unsigned int sdram_time2;
+ unsigned int sdram_time2_shdw;
+ unsigned int sdram_time3;
+ unsigned int sdram_time3_shdw;
+ unsigned char res2[8];
+ unsigned int sdram_pwr_mgmt;
+ unsigned int sdram_pwr_mgmt_shdw;
+ unsigned char res3[32];
+ unsigned int sdram_iodft_tlgc;
+ unsigned char res4[128];
+ unsigned int ddr_phyctrl1;
+ unsigned int ddr_phyctrl1_shdw;
+ unsigned int ddr_phyctrl2;
+} emif4_t;
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL_STRICT_NAMES */
diff --git a/arch/arm/include/asm/arch-omap3/emif4.h b/arch/arm/include/asm/arch-omap3/emif4.h
new file mode 100644
index 0000000..579da0c
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap3/emif4.h
@@ -0,0 +1,79 @@
+/*
+ * Auther:
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Copyright (C) 2010
+ * Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _EMIF_H_
+#define _EMIF_H_
+
+/*
+ * Configuration values
+ */
+#define EMIF4_TIM1_T_RP (0x3 << 25)
+#define EMIF4_TIM1_T_RCD (0x3 << 21)
+#define EMIF4_TIM1_T_WR (0x3 << 17)
+#define EMIF4_TIM1_T_RAS (0x8 << 12)
+#define EMIF4_TIM1_T_RC (0xA << 6)
+#define EMIF4_TIM1_T_RRD (0x2 << 3)
+#define EMIF4_TIM1_T_WTR (0x2)
+
+#define EMIF4_TIM2_T_XP (0x2 << 28)
+#define EMIF4_TIM2_T_ODT (0x0 << 25)
+#define EMIF4_TIM2_T_XSNR (0x1C << 16)
+#define EMIF4_TIM2_T_XSRD (0xC8 << 6)
+#define EMIF4_TIM2_T_RTP (0x1 << 3)
+#define EMIF4_TIM2_T_CKE (0x2)
+
+#define EMIF4_TIM3_T_RFC (0x25 << 4)
+#define EMIF4_TIM3_T_RAS_MAX (0x7)
+
+#define EMIF4_PWR_IDLE_MODE (0x2 << 30)
+#define EMIF4_PWR_DPD_DIS (0x0 << 10)
+#define EMIF4_PWR_DPD_EN (0x1 << 10)
+#define EMIF4_PWR_LP_MODE (0x0 << 8)
+#define EMIF4_PWR_PM_TIM (0x0)
+
+#define EMIF4_INITREF_DIS (0x0 << 31)
+#define EMIF4_REFRESH_RATE (0x50F)
+
+#define EMIF4_CFG_SDRAM_TYP (0x2 << 29)
+#define EMIF4_CFG_IBANK_POS (0x0 << 27)
+#define EMIF4_CFG_DDR_TERM (0x0 << 24)
+#define EMIF4_CFG_DDR2_DDQS (0x1 << 23)
+#define EMIF4_CFG_DDR_DIS_DLL (0x0 << 20)
+#define EMIF4_CFG_SDR_DRV (0x0 << 18)
+#define EMIF4_CFG_NARROW_MD (0x0 << 14)
+#define EMIF4_CFG_CL (0x5 << 10)
+#define EMIF4_CFG_ROWSIZE (0x0 << 7)
+#define EMIF4_CFG_IBANK (0x3 << 4)
+#define EMIF4_CFG_EBANK (0x0 << 3)
+#define EMIF4_CFG_PGSIZE (0x2)
+
+/*
+ * EMIF4 PHY Control 1 register configuration
+ */
+#define EMIF4_DDR1_EXT_STRB_EN (0x1 << 7)
+#define EMIF4_DDR1_EXT_STRB_DIS (0x0 << 7)
+#define EMIF4_DDR1_PWRDN_DIS (0x0 << 6)
+#define EMIF4_DDR1_PWRDN_EN (0x1 << 6)
+#define EMIF4_DDR1_READ_LAT (0x6 << 0)
+
+#endif /* endif _EMIF_H_ */
diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h
index 9439758..a78cf9f 100644
--- a/arch/arm/include/asm/arch-omap3/mem.h
+++ b/arch/arm/include/asm/arch-omap3/mem.h
@@ -270,4 +270,17 @@ enum {
#define PISMO1_ONEN_BASE ONENAND_MAP
#define DBG_MPDB_BASE DEBUG_BASE
+#ifndef __ASSEMBLY__
+
+/* Function prototypes */
+void mem_init(void);
+
+u32 is_mem_sdr(void);
+u32 mem_ok(u32 cs);
+
+u32 get_sdr_cs_size(u32);
+u32 get_sdr_cs_offset(u32);
+
+#endif /* __ASSEMBLY__ */
+
#endif /* endif _MEM_H_ */
diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
index 34bd515..db7b42a 100644
--- a/arch/arm/include/asm/arch-omap3/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
@@ -33,6 +33,7 @@ void per_clocks_enable(void);
void memif_init(void);
void sdrc_init(void);
void do_sdrc_init(u32, u32);
+void emif4_init(void);
void gpmc_init(void);
void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
u32 size);
@@ -46,8 +47,6 @@ u32 get_sysboot_value(void);
u32 is_gpmc_muxed(void);
u32 get_gpmc0_type(void);
u32 get_gpmc0_width(void);
-u32 get_sdr_cs_size(u32);
-u32 get_sdr_cs_offset(u32);
u32 is_running_in_sdram(void);
u32 is_running_in_sram(void);
u32 is_running_in_flash(void);
diff --git a/arch/arm/include/asm/arch-tnetv107x/clock.h b/arch/arm/include/asm/arch-tnetv107x/clock.h
new file mode 100644
index 0000000..097f825
--- /dev/null
+++ b/arch/arm/include/asm/arch-tnetv107x/clock.h
@@ -0,0 +1,68 @@
+/*
+ * TNETV107X: Clock APIs
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+#define PSC_MDCTL_NEXT_SWRSTDISABLE 0x0
+#define PSC_MDCTL_NEXT_SYNCRST 0x1
+#define PSC_MDCTL_NEXT_DISABLE 0x2
+#define PSC_MDCTL_NEXT_ENABLE 0x3
+
+#define CONFIG_SYS_INT_OSC_FREQ 24000000
+
+#ifndef __ASSEMBLY__
+
+/* PLL identifiers */
+enum pll_type_e {
+ SYS_PLL,
+ TDM_PLL,
+ ETH_PLL
+};
+
+/* PLL configuration data */
+struct pll_init_data {
+ int pll;
+ int internal_osc;
+ unsigned long pll_freq;
+ unsigned long div_freq[10];
+};
+
+void init_plls(int num_pll, struct pll_init_data *config);
+int lpsc_status(unsigned int mod);
+void lpsc_control(int mod, unsigned long state, int lrstz);
+unsigned long clk_get_rate(unsigned int clk);
+unsigned long clk_round_rate(unsigned int clk, unsigned long hz);
+int clk_set_rate(unsigned int clk, unsigned long hz);
+
+static inline void clk_enable(unsigned int mod)
+{
+ lpsc_control(mod, PSC_MDCTL_NEXT_ENABLE, -1);
+}
+
+static inline void clk_disable(unsigned int mod)
+{
+ lpsc_control(mod, PSC_MDCTL_NEXT_DISABLE, -1);
+}
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/arch-tnetv107x/emif_defs.h b/arch/arm/include/asm/arch-tnetv107x/emif_defs.h
new file mode 100644
index 0000000..9969a01
--- /dev/null
+++ b/arch/arm/include/asm/arch-tnetv107x/emif_defs.h
@@ -0,0 +1 @@
+#include <asm/arch-davinci/emif_defs.h>
diff --git a/arch/arm/include/asm/arch-tnetv107x/hardware.h b/arch/arm/include/asm/arch-tnetv107x/hardware.h
new file mode 100644
index 0000000..94a94f9
--- /dev/null
+++ b/arch/arm/include/asm/arch-tnetv107x/hardware.h
@@ -0,0 +1,173 @@
+/*
+ * TNETV107X: Hardware information
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/sizes.h>
+
+#define ASYNC_EMIF_NUM_CS 4
+#define ASYNC_EMIF_MODE_NOR 0
+#define ASYNC_EMIF_MODE_NAND 1
+#define ASYNC_EMIF_MODE_ONENAND 2
+#define ASYNC_EMIF_PRESERVE -1
+
+struct async_emif_config {
+ unsigned mode;
+ unsigned select_strobe;
+ unsigned extend_wait;
+ unsigned wr_setup;
+ unsigned wr_strobe;
+ unsigned wr_hold;
+ unsigned rd_setup;
+ unsigned rd_strobe;
+ unsigned rd_hold;
+ unsigned turn_around;
+ enum {
+ ASYNC_EMIF_8 = 0,
+ ASYNC_EMIF_16 = 1,
+ ASYNC_EMIF_32 = 2,
+ } width;
+};
+
+void init_async_emif(int num_cs, struct async_emif_config *config);
+
+int wdt_start(unsigned long msecs);
+int wdt_stop(void);
+int wdt_kick(void);
+
+#endif
+
+/* Chip configuration unlock codes and registers */
+#define TNETV107X_KICK0 (TNETV107X_CHIP_CONFIG_SYS_BASE+0x38)
+#define TNETV107X_KICK1 (TNETV107X_CHIP_CONFIG_SYS_BASE+0x3c)
+#define TNETV107X_PINMUX(n) (TNETV107X_CHIP_CONFIG_SYS_BASE+0x150+(n)*4)
+#define TNETV107X_KICK0_MAGIC 0x83e70b13
+#define TNETV107X_KICK1_MAGIC 0x95a4f1e0
+
+/* Module base addresses */
+#define TNETV107X_TPCC_BASE 0x01C00000
+#define TNETV107X_TPTC0_BASE 0x01C10000
+#define TNETV107X_TPTC1_BASE 0x01C10400
+#define TNETV107X_INTC_BASE 0x03000000
+#define TNETV107X_LCD_CONTROLLER_BASE 0x08030000
+#define TNETV107X_INTD_BASE 0x08038000
+#define TNETV107X_INTD_IPC_BASE 0x08038000
+#define TNETV107X_INTD_FAST_BASE 0x08039000
+#define TNETV107X_INTD_ASYNC_BASE 0x0803A000
+#define TNETV107X_INTD_SLOW_BASE 0x0803B000
+#define TNETV107X_PKA_BASE 0x08040000
+#define TNETV107X_RNG_BASE 0x08044000
+#define TNETV107X_TIMER0_BASE 0x08086500
+#define TNETV107X_TIMER1_BASE 0x08086600
+#define TNETV107X_WDT0_ARM_BASE 0x08086700
+#define TNETV107X_WDT1_DSP_BASE 0x08086800
+#define TNETV107X_CHIP_CONFIG_SYS_BASE 0x08087000
+#define TNETV107X_GPIO_BASE 0x08088000
+#define TNETV107X_UART1_BASE 0x08088400
+#define TNETV107X_TOUCHSCREEN_BASE 0x08088500
+#define TNETV107X_SDIO0_BASE 0x08088700
+#define TNETV107X_SDIO1_BASE 0x08088800
+#define TNETV107X_MDIO_BASE 0x08088900
+#define TNETV107X_KEYPAD_BASE 0x08088A00
+#define TNETV107X_SSP_BASE 0x08088C00
+#define TNETV107X_CLOCK_CONTROL_BASE 0x0808A000
+#define TNETV107X_PSC_BASE 0x0808B000
+#define TNETV107X_TDM0_BASE 0x08100000
+#define TNETV107X_TDM1_BASE 0x08100100
+#define TNETV107X_MCDMA_BASE 0x08108000
+#define TNETV107X_UART0_DMA_BASE 0x08108200
+#define TNETV107X_USBSS_BASE 0x08120000
+#define TNETV107X_VLYNQ_CONTROL_BASE 0x0810D000
+#define TNETV107X_ASYNC_EMIF_CNTRL_BASE 0x08200000
+#define TNETV107X_VLYNQ_MEM_MAP_BASE 0x0C000000
+#define TNETV107X_IMCOP_BASE 0x01CC0000
+#define TNETV107X_MBX_LITE_BASE 0x07000000
+#define TNETV107X_ETHSS_BASE 0x0803C000
+#define TNETV107X_CPSW_BASE 0x0803C000
+#define TNETV107X_SPF_BASE 0x0803C800
+#define TNETV107X_IOPU_ETHSS_BASE 0x0803D000
+#define TNETV107X_VTP_CNTRL_0 0x0803D800
+#define TNETV107X_VTP_CNTRL_1 0x0803D900
+#define TNETV107X_UART2_DMA_BASE 0x08108400
+#define TNETV107X_INTERNAL_MEMORY 0x20000000
+#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE 0x30000000
+#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE 0x40000000
+#define TNETV107X_ASYNC_EMIF_DATA_CE2_BASE 0x44000000
+#define TNETV107X_ASYNC_EMIF_DATA_CE3_BASE 0x48000000
+#define TNETV107X_DDR_EMIF_DATA_BASE 0x80000000
+#define TNETV107X_DDR_EMIF_CONTROL_BASE 0x90000000
+
+/* LPSC module definitions */
+#define TNETV107X_LPSC_ARM 0
+#define TNETV107X_LPSC_GEM 1
+#define TNETV107X_LPSC_DDR2_PHY 2
+#define TNETV107X_LPSC_TPCC 3
+#define TNETV107X_LPSC_TPTC0 4
+#define TNETV107X_LPSC_TPTC1 5
+#define TNETV107X_LPSC_RAM 6
+#define TNETV107X_LPSC_MBX_LITE 7
+#define TNETV107X_LPSC_LCD 8
+#define TNETV107X_LPSC_ETHSS 9
+#define TNETV107X_LPSC_AEMIF 10
+#define TNETV107X_LPSC_CHIP_CFG 11
+#define TNETV107X_LPSC_TSC 12
+#define TNETV107X_LPSC_ROM 13
+#define TNETV107X_LPSC_UART2 14
+#define TNETV107X_LPSC_PKTSEC 15
+#define TNETV107X_LPSC_SECCTL 16
+#define TNETV107X_LPSC_KEYMGR 17
+#define TNETV107X_LPSC_KEYPAD 18
+#define TNETV107X_LPSC_GPIO 19
+#define TNETV107X_LPSC_MDIO 20
+#define TNETV107X_LPSC_SDIO0 21
+#define TNETV107X_LPSC_UART0 22
+#define TNETV107X_LPSC_UART1 23
+#define TNETV107X_LPSC_TIMER0 24
+#define TNETV107X_LPSC_TIMER1 25
+#define TNETV107X_LPSC_WDT_ARM 26
+#define TNETV107X_LPSC_WDT_DSP 27
+#define TNETV107X_LPSC_SSP 28
+#define TNETV107X_LPSC_TDM0 29
+#define TNETV107X_LPSC_VLYNQ 30
+#define TNETV107X_LPSC_MCDMA 31
+#define TNETV107X_LPSC_USB0 32
+#define TNETV107X_LPSC_TDM1 33
+#define TNETV107X_LPSC_DEBUGSS 34
+#define TNETV107X_LPSC_ETHSS_RGMII 35
+#define TNETV107X_LPSC_SYSTEM 36
+#define TNETV107X_LPSC_IMCOP 37
+#define TNETV107X_LPSC_SPARE 38
+#define TNETV107X_LPSC_SDIO1 39
+#define TNETV107X_LPSC_USB1 40
+#define TNETV107X_LPSC_USBSS 41
+#define TNETV107X_LPSC_DDR2_EMIF1_VRST 42
+#define TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST 43
+#define TNETV107X_LPSC_MAX 44
+
+/* Interrupt controller */
+#define INTC_GLB_EN (TNETV107X_INTC_BASE + 0x10)
+#define INTC_HINT_EN (TNETV107X_INTC_BASE + 0x1500)
+#define INTC_EN_CLR0 (TNETV107X_INTC_BASE + 0x380)
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-tnetv107x/mux.h b/arch/arm/include/asm/arch-tnetv107x/mux.h
new file mode 100644
index 0000000..f16bc99
--- /dev/null
+++ b/arch/arm/include/asm/arch-tnetv107x/mux.h
@@ -0,0 +1,306 @@
+/*
+ * TNETV107X: Pinmux APIs
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+struct pin_config {
+ unsigned char reg_index;
+ unsigned char mask_offset;
+ unsigned char mode;
+};
+
+#define TNETV107X_MUX_CFG(reg, offset, mux_mode) \
+ { reg, offset, mux_mode }
+
+int mux_select_pin(short index);
+int mux_select_pins(const short *pins);
+
+enum tnetv107x_pin_mux_index {
+ TNETV107X_PIN_ASR_A00,
+ TNETV107X_PIN_GPIO32,
+ TNETV107X_PIN_ASR_A01,
+ TNETV107X_PIN_GPIO33,
+ TNETV107X_PIN_ASR_A02,
+ TNETV107X_PIN_GPIO34,
+ TNETV107X_PIN_ASR_A03,
+ TNETV107X_PIN_GPIO35,
+ TNETV107X_PIN_ASR_A04,
+ TNETV107X_PIN_GPIO36,
+ TNETV107X_PIN_ASR_A05,
+ TNETV107X_PIN_GPIO37,
+ TNETV107X_PIN_ASR_A06,
+ TNETV107X_PIN_GPIO38,
+ TNETV107X_PIN_ASR_A07,
+ TNETV107X_PIN_GPIO39,
+ TNETV107X_PIN_ASR_A08,
+ TNETV107X_PIN_GPIO40,
+ TNETV107X_PIN_ASR_A09,
+ TNETV107X_PIN_GPIO41,
+ TNETV107X_PIN_ASR_A10,
+ TNETV107X_PIN_GPIO42,
+ TNETV107X_PIN_ASR_A11,
+ TNETV107X_PIN_BOOT_STRP_0,
+ TNETV107X_PIN_ASR_A12,
+ TNETV107X_PIN_BOOT_STRP_1,
+ TNETV107X_PIN_ASR_A13,
+ TNETV107X_PIN_GPIO43,
+ TNETV107X_PIN_ASR_A14,
+ TNETV107X_PIN_GPIO44,
+ TNETV107X_PIN_ASR_A15,
+ TNETV107X_PIN_GPIO45,
+ TNETV107X_PIN_ASR_A16,
+ TNETV107X_PIN_GPIO46,
+ TNETV107X_PIN_ASR_A17,
+ TNETV107X_PIN_GPIO47,
+ TNETV107X_PIN_ASR_A18,
+ TNETV107X_PIN_GPIO48,
+ TNETV107X_PIN_SDIO1_DATA3_0,
+ TNETV107X_PIN_ASR_A19,
+ TNETV107X_PIN_GPIO49,
+ TNETV107X_PIN_SDIO1_DATA2_0,
+ TNETV107X_PIN_ASR_A20,
+ TNETV107X_PIN_GPIO50,
+ TNETV107X_PIN_SDIO1_DATA1_0,
+ TNETV107X_PIN_ASR_A21,
+ TNETV107X_PIN_GPIO51,
+ TNETV107X_PIN_SDIO1_DATA0_0,
+ TNETV107X_PIN_ASR_A22,
+ TNETV107X_PIN_GPIO52,
+ TNETV107X_PIN_SDIO1_CMD_0,
+ TNETV107X_PIN_ASR_A23,
+ TNETV107X_PIN_GPIO53,
+ TNETV107X_PIN_SDIO1_CLK_0,
+ TNETV107X_PIN_ASR_BA_1,
+ TNETV107X_PIN_GPIO54,
+ TNETV107X_PIN_SYS_PLL_CLK,
+ TNETV107X_PIN_ASR_CS0,
+ TNETV107X_PIN_ASR_CS1,
+ TNETV107X_PIN_ASR_CS2,
+ TNETV107X_PIN_TDM_PLL_CLK,
+ TNETV107X_PIN_ASR_CS3,
+ TNETV107X_PIN_ETH_PHY_CLK,
+ TNETV107X_PIN_ASR_D00,
+ TNETV107X_PIN_GPIO55,
+ TNETV107X_PIN_ASR_D01,
+ TNETV107X_PIN_GPIO56,
+ TNETV107X_PIN_ASR_D02,
+ TNETV107X_PIN_GPIO57,
+ TNETV107X_PIN_ASR_D03,
+ TNETV107X_PIN_GPIO58,
+ TNETV107X_PIN_ASR_D04,
+ TNETV107X_PIN_GPIO59_0,
+ TNETV107X_PIN_ASR_D05,
+ TNETV107X_PIN_GPIO60_0,
+ TNETV107X_PIN_ASR_D06,
+ TNETV107X_PIN_GPIO61_0,
+ TNETV107X_PIN_ASR_D07,
+ TNETV107X_PIN_GPIO62_0,
+ TNETV107X_PIN_ASR_D08,
+ TNETV107X_PIN_GPIO63_0,
+ TNETV107X_PIN_ASR_D09,
+ TNETV107X_PIN_GPIO64_0,
+ TNETV107X_PIN_ASR_D10,
+ TNETV107X_PIN_SDIO1_DATA3_1,
+ TNETV107X_PIN_ASR_D11,
+ TNETV107X_PIN_SDIO1_DATA2_1,
+ TNETV107X_PIN_ASR_D12,
+ TNETV107X_PIN_SDIO1_DATA1_1,
+ TNETV107X_PIN_ASR_D13,
+ TNETV107X_PIN_SDIO1_DATA0_1,
+ TNETV107X_PIN_ASR_D14,
+ TNETV107X_PIN_SDIO1_CMD_1,
+ TNETV107X_PIN_ASR_D15,
+ TNETV107X_PIN_SDIO1_CLK_1,
+ TNETV107X_PIN_ASR_OE,
+ TNETV107X_PIN_BOOT_STRP_2,
+ TNETV107X_PIN_ASR_RNW,
+ TNETV107X_PIN_GPIO29_0,
+ TNETV107X_PIN_ASR_WAIT,
+ TNETV107X_PIN_GPIO30_0,
+ TNETV107X_PIN_ASR_WE,
+ TNETV107X_PIN_BOOT_STRP_3,
+ TNETV107X_PIN_ASR_WE_DQM0,
+ TNETV107X_PIN_GPIO31,
+ TNETV107X_PIN_LCD_PD17_0,
+ TNETV107X_PIN_ASR_WE_DQM1,
+ TNETV107X_PIN_ASR_BA0_0,
+ TNETV107X_PIN_VLYNQ_CLK,
+ TNETV107X_PIN_GPIO14,
+ TNETV107X_PIN_LCD_PD19_0,
+ TNETV107X_PIN_VLYNQ_RXD0,
+ TNETV107X_PIN_GPIO15,
+ TNETV107X_PIN_LCD_PD20_0,
+ TNETV107X_PIN_VLYNQ_RXD1,
+ TNETV107X_PIN_GPIO16,
+ TNETV107X_PIN_LCD_PD21_0,
+ TNETV107X_PIN_VLYNQ_TXD0,
+ TNETV107X_PIN_GPIO17,
+ TNETV107X_PIN_LCD_PD22_0,
+ TNETV107X_PIN_VLYNQ_TXD1,
+ TNETV107X_PIN_GPIO18,
+ TNETV107X_PIN_LCD_PD23_0,
+ TNETV107X_PIN_SDIO0_CLK,
+ TNETV107X_PIN_GPIO19,
+ TNETV107X_PIN_SDIO0_CMD,
+ TNETV107X_PIN_GPIO20,
+ TNETV107X_PIN_SDIO0_DATA0,
+ TNETV107X_PIN_GPIO21,
+ TNETV107X_PIN_SDIO0_DATA1,
+ TNETV107X_PIN_GPIO22,
+ TNETV107X_PIN_SDIO0_DATA2,
+ TNETV107X_PIN_GPIO23,
+ TNETV107X_PIN_SDIO0_DATA3,
+ TNETV107X_PIN_GPIO24,
+ TNETV107X_PIN_EMU0,
+ TNETV107X_PIN_EMU1,
+ TNETV107X_PIN_RTCK,
+ TNETV107X_PIN_TRST_N,
+ TNETV107X_PIN_TCK,
+ TNETV107X_PIN_TDI,
+ TNETV107X_PIN_TDO,
+ TNETV107X_PIN_TMS,
+ TNETV107X_PIN_TDM1_CLK,
+ TNETV107X_PIN_TDM1_RX,
+ TNETV107X_PIN_TDM1_TX,
+ TNETV107X_PIN_TDM1_FS,
+ TNETV107X_PIN_KEYPAD_R0,
+ TNETV107X_PIN_KEYPAD_R1,
+ TNETV107X_PIN_KEYPAD_R2,
+ TNETV107X_PIN_KEYPAD_R3,
+ TNETV107X_PIN_KEYPAD_R4,
+ TNETV107X_PIN_KEYPAD_R5,
+ TNETV107X_PIN_KEYPAD_R6,
+ TNETV107X_PIN_GPIO12,
+ TNETV107X_PIN_KEYPAD_R7,
+ TNETV107X_PIN_GPIO10,
+ TNETV107X_PIN_KEYPAD_C0,
+ TNETV107X_PIN_KEYPAD_C1,
+ TNETV107X_PIN_KEYPAD_C2,
+ TNETV107X_PIN_KEYPAD_C3,
+ TNETV107X_PIN_KEYPAD_C4,
+ TNETV107X_PIN_KEYPAD_C5,
+ TNETV107X_PIN_KEYPAD_C6,
+ TNETV107X_PIN_GPIO13,
+ TNETV107X_PIN_TEST_CLK_IN,
+ TNETV107X_PIN_KEYPAD_C7,
+ TNETV107X_PIN_GPIO11,
+ TNETV107X_PIN_SSP0_0,
+ TNETV107X_PIN_SCC_DCLK,
+ TNETV107X_PIN_LCD_PD20_1,
+ TNETV107X_PIN_SSP0_1,
+ TNETV107X_PIN_SCC_CS_N,
+ TNETV107X_PIN_LCD_PD21_1,
+ TNETV107X_PIN_SSP0_2,
+ TNETV107X_PIN_SCC_D,
+ TNETV107X_PIN_LCD_PD22_1,
+ TNETV107X_PIN_SSP0_3,
+ TNETV107X_PIN_SCC_RESETN,
+ TNETV107X_PIN_LCD_PD23_1,
+ TNETV107X_PIN_SSP1_0,
+ TNETV107X_PIN_GPIO25,
+ TNETV107X_PIN_UART2_CTS,
+ TNETV107X_PIN_SSP1_1,
+ TNETV107X_PIN_GPIO26,
+ TNETV107X_PIN_UART2_RD,
+ TNETV107X_PIN_SSP1_2,
+ TNETV107X_PIN_GPIO27,
+ TNETV107X_PIN_UART2_RTS,
+ TNETV107X_PIN_SSP1_3,
+ TNETV107X_PIN_GPIO28,
+ TNETV107X_PIN_UART2_TD,
+ TNETV107X_PIN_UART0_CTS,
+ TNETV107X_PIN_UART0_RD,
+ TNETV107X_PIN_UART0_RTS,
+ TNETV107X_PIN_UART0_TD,
+ TNETV107X_PIN_UART1_RD,
+ TNETV107X_PIN_UART1_TD,
+ TNETV107X_PIN_LCD_AC_NCS,
+ TNETV107X_PIN_LCD_HSYNC_RNW,
+ TNETV107X_PIN_LCD_VSYNC_A0,
+ TNETV107X_PIN_LCD_MCLK,
+ TNETV107X_PIN_LCD_PD16_0,
+ TNETV107X_PIN_LCD_PCLK_E,
+ TNETV107X_PIN_LCD_PD00,
+ TNETV107X_PIN_LCD_PD01,
+ TNETV107X_PIN_LCD_PD02,
+ TNETV107X_PIN_LCD_PD03,
+ TNETV107X_PIN_LCD_PD04,
+ TNETV107X_PIN_LCD_PD05,
+ TNETV107X_PIN_LCD_PD06,
+ TNETV107X_PIN_LCD_PD07,
+ TNETV107X_PIN_LCD_PD08,
+ TNETV107X_PIN_GPIO59_1,
+ TNETV107X_PIN_LCD_PD09,
+ TNETV107X_PIN_GPIO60_1,
+ TNETV107X_PIN_LCD_PD10,
+ TNETV107X_PIN_ASR_BA0_1,
+ TNETV107X_PIN_GPIO61_1,
+ TNETV107X_PIN_LCD_PD11,
+ TNETV107X_PIN_GPIO62_1,
+ TNETV107X_PIN_LCD_PD12,
+ TNETV107X_PIN_GPIO63_1,
+ TNETV107X_PIN_LCD_PD13,
+ TNETV107X_PIN_GPIO64_1,
+ TNETV107X_PIN_LCD_PD14,
+ TNETV107X_PIN_GPIO29_1,
+ TNETV107X_PIN_LCD_PD15,
+ TNETV107X_PIN_GPIO30_1,
+ TNETV107X_PIN_EINT0,
+ TNETV107X_PIN_GPIO08,
+ TNETV107X_PIN_EINT1,
+ TNETV107X_PIN_GPIO09,
+ TNETV107X_PIN_GPIO00,
+ TNETV107X_PIN_LCD_PD20_2,
+ TNETV107X_PIN_TDM_CLK_IN_2,
+ TNETV107X_PIN_GPIO01,
+ TNETV107X_PIN_LCD_PD21_2,
+ TNETV107X_PIN_24M_CLK_OUT_1,
+ TNETV107X_PIN_GPIO02,
+ TNETV107X_PIN_LCD_PD22_2,
+ TNETV107X_PIN_GPIO03,
+ TNETV107X_PIN_LCD_PD23_2,
+ TNETV107X_PIN_GPIO04,
+ TNETV107X_PIN_LCD_PD16_1,
+ TNETV107X_PIN_USB0_RXERR,
+ TNETV107X_PIN_GPIO05,
+ TNETV107X_PIN_LCD_PD17_1,
+ TNETV107X_PIN_TDM_CLK_IN_1,
+ TNETV107X_PIN_GPIO06,
+ TNETV107X_PIN_LCD_PD18,
+ TNETV107X_PIN_24M_CLK_OUT_2,
+ TNETV107X_PIN_GPIO07,
+ TNETV107X_PIN_LCD_PD19_1,
+ TNETV107X_PIN_USB1_RXERR,
+ TNETV107X_PIN_ETH_PLL_CLK,
+ TNETV107X_PIN_MDIO,
+ TNETV107X_PIN_MDC,
+ TNETV107X_PIN_AIC_MUTE_STAT_N,
+ TNETV107X_PIN_TDM0_CLK,
+ TNETV107X_PIN_AIC_HNS_EN_N,
+ TNETV107X_PIN_TDM0_FS,
+ TNETV107X_PIN_AIC_HDS_EN_STAT_N,
+ TNETV107X_PIN_TDM0_TX,
+ TNETV107X_PIN_AIC_HNF_EN_STAT_N,
+ TNETV107X_PIN_TDM0_RX,
+};
+
+#endif
diff --git a/arch/arm/include/asm/arch-tnetv107x/nand_defs.h b/arch/arm/include/asm/arch-tnetv107x/nand_defs.h
new file mode 100644
index 0000000..961b710
--- /dev/null
+++ b/arch/arm/include/asm/arch-tnetv107x/nand_defs.h
@@ -0,0 +1,38 @@
+/*
+ * TNETV107X: NAND definitions
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _NAND_DEFS_H_
+#define _NAND_DEFS_H_
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/emif_defs.h>
+
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE TNETV107X_ASYNC_EMIF_CNTRL_BASE
+
+#define MASK_CLE 0x4000
+#define MASK_ALE 0x2000
+
+#define NAND_READ_START 0x00
+#define NAND_READ_END 0x30
+#define NAND_STATUS 0x70
+
+extern void davinci_nand_init(struct nand_chip *nand);
+
+#endif
diff --git a/board/logicpd/am3517evm/Makefile b/board/logicpd/am3517evm/Makefile
new file mode 100644
index 0000000..3a6b1a1
--- /dev/null
+++ b/board/logicpd/am3517evm/Makefile
@@ -0,0 +1,46 @@
+#
+# Author: Vaibhav Hiremath <hvaibhav@ti.com>
+#
+# Based on ti/evm/Makefile
+#
+# Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := am3517evm.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
new file mode 100644
index 0000000..bbb6e83
--- /dev/null
+++ b/board/logicpd/am3517evm/am3517evm.c
@@ -0,0 +1,76 @@
+/*
+ * am3517evm.c - board file for TI's AM3517 family of devices.
+ *
+ * Author: Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Based on ti/evm/evm.c
+ *
+ * Copyright (C) 2010
+ * Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+#include <i2c.h>
+#include "am3517evm.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+ /* board id for Linux */
+ gd->bd->bi_arch_number = MACH_TYPE_OMAP3517EVM;
+ /* boot param addr */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+ return 0;
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Init i2c, ethernet, etc... (done here so udelay works)
+ */
+int misc_init_r(void)
+{
+#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+ dieid_num_r();
+
+ return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */
+void set_muxconf_regs(void)
+{
+ MUX_AM3517EVM();
+}
diff --git a/board/logicpd/am3517evm/am3517evm.h b/board/logicpd/am3517evm/am3517evm.h
new file mode 100644
index 0000000..3d74ef1
--- /dev/null
+++ b/board/logicpd/am3517evm/am3517evm.h
@@ -0,0 +1,445 @@
+/*
+ * am3517evm.h - Header file for the AM3517 EVM.
+ *
+ * Author: Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Based on ti/evm/evm.h
+ *
+ * Copyright (C) 2010
+ * Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _AM3517EVM_H_
+#define _AM3517EVM_H_
+
+const omap3_sysinfo sysinfo = {
+ DDR_DISCRETE,
+ "AM3517EVM Board",
+ "NAND",
+};
+/* AM3517 specific mux configuration */
+#define CONTROL_PADCONF_SYS_NRESWARM 0x0A08
+/* CCDC */
+#define CONTROL_PADCONF_CCDC_PCLK 0x01E4
+#define CONTROL_PADCONF_CCDC_FIELD 0x01E6
+#define CONTROL_PADCONF_CCDC_HD 0x01E8
+#define CONTROL_PADCONF_CCDC_VD 0x01EA
+#define CONTROL_PADCONF_CCDC_WEN 0x01EC
+#define CONTROL_PADCONF_CCDC_DATA0 0x01EE
+#define CONTROL_PADCONF_CCDC_DATA1 0x01F0
+#define CONTROL_PADCONF_CCDC_DATA2 0x01F2
+#define CONTROL_PADCONF_CCDC_DATA3 0x01F4
+#define CONTROL_PADCONF_CCDC_DATA4 0x01F6
+#define CONTROL_PADCONF_CCDC_DATA5 0x01F8
+#define CONTROL_PADCONF_CCDC_DATA6 0x01FA
+#define CONTROL_PADCONF_CCDC_DATA7 0x01FC
+/* RMII */
+#define CONTROL_PADCONF_RMII_MDIO_DATA 0x01FE
+#define CONTROL_PADCONF_RMII_MDIO_CLK 0x0200
+#define CONTROL_PADCONF_RMII_RXD0 0x0202
+#define CONTROL_PADCONF_RMII_RXD1 0x0204
+#define CONTROL_PADCONF_RMII_CRS_DV 0x0206
+#define CONTROL_PADCONF_RMII_RXER 0x0208
+#define CONTROL_PADCONF_RMII_TXD0 0x020A
+#define CONTROL_PADCONF_RMII_TXD1 0x020C
+#define CONTROL_PADCONF_RMII_TXEN 0x020E
+#define CONTROL_PADCONF_RMII_50MHZ_CLK 0x0210
+#define CONTROL_PADCONF_USB0_DRVBUS 0x0212
+/* CAN */
+#define CONTROL_PADCONF_HECC1_TXD 0x0214
+#define CONTROL_PADCONF_HECC1_RXD 0x0216
+
+#define CONTROL_PADCONF_SYS_BOOT7 0x0218
+#define CONTROL_PADCONF_SDRC_DQS0N 0x021A
+#define CONTROL_PADCONF_SDRC_DQS1N 0x021C
+#define CONTROL_PADCONF_SDRC_DQS2N 0x021E
+#define CONTROL_PADCONF_SDRC_DQS3N 0x0220
+#define CONTROL_PADCONF_STRBEN_DLY0 0x0222
+#define CONTROL_PADCONF_STRBEN_DLY1 0x0224
+#define CONTROL_PADCONF_SYS_BOOT8 0x0226
+
+/*
+ * IEN - Input Enable
+ * IDIS - Input Disable
+ * PTD - Pull type Down
+ * PTU - Pull type Up
+ * DIS - Pull type selection is inactive
+ * EN - Pull type selection is active
+ * M0 - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_AM3517EVM() \
+ /* SDRC */\
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_CKE0), (M0)) \
+ MUX_VAL(CP(SDRC_CKE1), (M0)) \
+ /*sdrc_strben_dly0*/\
+ MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \
+ /*sdrc_strben_dly1*/\
+ MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \
+ /* GPMC */\
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\
+ /* - ETH_nRESET*/\
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) \
+ /* DSS */\
+ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \
+ /* CAMERA */\
+ MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+ /* - CAM_RESET*/\
+ MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) \
+ /* MMC */\
+ MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \
+ /* WriteProtect */\
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*CardDetect*/\
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \
+ \
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTD | DIS | M0)) \
+ /* McBSP */\
+ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_152*/\
+ /* - LCD_INI*/\
+ MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) /*GPIO_153*/\
+ /* - LCD_ENVDD */\
+ MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) /*GPIO_154*/\
+ /* - LCD_QVGA/nVGA */\
+ MUX_VAL(CP(MCBSP4_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_155*/\
+ /* - LCD_RESB */\
+ /* UART */\
+ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) \
+ \
+ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \
+ /* I2C */\
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \
+ /* McSPI */\
+ MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\
+ MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\
+ /* - LAN_INTR*/\
+ MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) \
+ \
+ MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \
+ MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M4)) \
+ /* CCDC */\
+ MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M1)) \
+ MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M1)) \
+ MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0)) \
+ /* RMII */\
+ MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \
+ MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \
+ MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \
+ MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \
+ MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \
+ MUX_VAL(CP(RMII_RXER), (PTD | M0)) \
+ MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \
+ MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \
+ MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \
+ MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \
+ /* HECC */\
+ MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(HECC1_RXD), (IEN | PTU | EN | M0)) \
+ /* HSUSB */\
+ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \
+ /* HDQ */\
+ MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) \
+ /* Control and debug */\
+ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \
+ /*SYS_nRESWARM */\
+ MUX_VAL(CP(SYS_NRESWARM), (IDIS | PTU | DIS | M4)) \
+ /* - GPIO30 */\
+ MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\
+ /* - PEN_IRQ */\
+ MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\
+ MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4*/\
+ MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\
+ MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\
+ MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\
+ MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\
+ /* - VIO_1V8*/\
+ MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \
+ \
+ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
+ /* JTAG */\
+ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) \
+ /* ETK (ES2 onwards) */\
+ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)) \
+ /* Die to Die */\
+ MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) \
+
+#endif
diff --git a/board/logicpd/am3517evm/config.mk b/board/logicpd/am3517evm/config.mk
new file mode 100644
index 0000000..f7a35ce
--- /dev/null
+++ b/board/logicpd/am3517evm/config.mk
@@ -0,0 +1,30 @@
+#
+# Author: Vaibhav Hiremath <hvaibhav@ti.com>
+#
+# Based on ti/evm/config.mk
+#
+# Copyright (C) 2010
+# Texas Instruments Incorporated - http://www.ti.com/
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80e80000
diff --git a/board/ronetix/pm9g45/Makefile b/board/ronetix/pm9g45/Makefile
new file mode 100644
index 0000000..dd5b02e
--- /dev/null
+++ b/board/ronetix/pm9g45/Makefile
@@ -0,0 +1,54 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += pm9g45.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ronetix/pm9g45/config.mk b/board/ronetix/pm9g45/config.mk
new file mode 100644
index 0000000..7fe9d03
--- /dev/null
+++ b/board/ronetix/pm9g45/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x73f00000
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
new file mode 100644
index 0000000..3b4d9a3
--- /dev/null
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -0,0 +1,188 @@
+/*
+ * (C) Copyright 2010
+ * Ilko Iliev <iliev@ronetix.at>
+ * Asen Dimov <dimov@ronetix.at>
+ * Ronetix GmbH <www.ronetix.at>
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91sam9g45.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_matrix.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void pm9g45_nand_hw_init(void)
+{
+ unsigned long csa;
+ at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE;
+ at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
+ /* Enable CS3 */
+ csa = readl(&matrix->ccr[6]) | AT91_MATRIX_CSA_EBI_CS3A;
+ writel(csa, &matrix->ccr[6]);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+
+ writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2),
+ &smc->cs[3].pulse);
+
+ writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4),
+ &smc->cs[3].cycle);
+
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_DBW_8 |
+ AT91_SMC_MODE_TDF_CYCLE(3),
+ &smc->cs[3].mode);
+
+ writel(1 << AT91SAM9G45_ID_PIOC, &pmc->pcer);
+
+#ifdef CONFIG_SYS_NAND_READY_PIN
+ /* Configure RDY/BSY */
+ at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+#endif
+
+ /* Enable NandFlash */
+ at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void pm9g45_macb_hw_init(void)
+{
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+
+ /*
+ * PD2 enables the 50MHz oscillator for Ethernet PHY
+ * 1 - enable
+ * 0 - disable
+ */
+ at91_set_pio_output(AT91_PIO_PORTD, 2, 1);
+ at91_set_pio_value(AT91_PIO_PORTD, 2, 1); /* 1- enable, 0 - disable */
+
+ /* Enable clock */
+ writel(1 << AT91SAM9G45_ID_EMAC, &pmc->pcer);
+
+ /*
+ * Disable pull-up on:
+ * RXDV (PA15) => PHY normal mode (not Test mode)
+ * ERX0 (PA12) => PHY ADDR0
+ * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
+ *
+ * PHY has internal pull-down
+ */
+ at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 12, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 13, 0);
+
+ /* Re-enable pull-up */
+ at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 12, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 13, 1);
+
+ at91_macb_hw_init();
+}
+#endif
+
+int board_init(void)
+{
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
+ /* Enable Ctrlc */
+ console_init_f();
+
+ writel((1 << AT91SAM9G45_ID_PIOA) |
+ (1 << AT91SAM9G45_ID_PIOB) |
+ (1 << AT91SAM9G45_ID_PIOC) |
+ (1 << AT91SAM9G45_ID_PIODE), &pmc->pcer);
+
+ /* arch number of AT91SAM9M10G45EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ pm9g45_nand_hw_init();
+#endif
+
+#ifdef CONFIG_MACB
+ pm9g45_macb_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+ /*
+ * Initialize ethernet HW addr prior to starting Linux,
+ * needed for nfsroot
+ */
+ eth_init(gd->bd);
+#endif
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01);
+#endif
+ return rc;
+}
diff --git a/board/ti/tnetv107xevm/Makefile b/board/ti/tnetv107xevm/Makefile
new file mode 100644
index 0000000..2446c2a
--- /dev/null
+++ b/board/ti/tnetv107xevm/Makefile
@@ -0,0 +1,49 @@
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS += sdb_board.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+.PHONY: all
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak *~ .depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ti/tnetv107xevm/config.mk b/board/ti/tnetv107xevm/config.mk
new file mode 100644
index 0000000..d24d49a
--- /dev/null
+++ b/board/ti/tnetv107xevm/config.mk
@@ -0,0 +1,20 @@
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+TEXT_BASE = 0x83FC0000
diff --git a/board/ti/tnetv107xevm/sdb_board.c b/board/ti/tnetv107xevm/sdb_board.c
new file mode 100644
index 0000000..3ed1cfd
--- /dev/null
+++ b/board/ti/tnetv107xevm/sdb_board.c
@@ -0,0 +1,149 @@
+/*
+ * TNETV107X-EVM: Board initialization
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <linux/mtd/nand.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/arch/nand_defs.h>
+#include <asm/arch/mux.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct async_emif_config async_emif_config[ASYNC_EMIF_NUM_CS] = {
+ { /* CS0 */
+ .mode = ASYNC_EMIF_MODE_NAND,
+ .wr_setup = 5,
+ .wr_strobe = 5,
+ .wr_hold = 2,
+ .rd_setup = 5,
+ .rd_strobe = 5,
+ .rd_hold = 2,
+ .turn_around = 5,
+ .width = ASYNC_EMIF_8,
+ },
+ { /* CS1 */
+ .mode = ASYNC_EMIF_MODE_NOR,
+ .wr_setup = 2,
+ .wr_strobe = 27,
+ .wr_hold = 4,
+ .rd_setup = 2,
+ .rd_strobe = 27,
+ .rd_hold = 4,
+ .turn_around = 2,
+ .width = ASYNC_EMIF_PRESERVE,
+ },
+ { /* CS2 */
+ .mode = ASYNC_EMIF_MODE_NOR,
+ .wr_setup = 2,
+ .wr_strobe = 27,
+ .wr_hold = 4,
+ .rd_setup = 2,
+ .rd_strobe = 27,
+ .rd_hold = 4,
+ .turn_around = 2,
+ .width = ASYNC_EMIF_PRESERVE,
+ },
+ { /* CS3 */
+ .mode = ASYNC_EMIF_MODE_NOR,
+ .wr_setup = 1,
+ .wr_strobe = 90,
+ .wr_hold = 3,
+ .rd_setup = 1,
+ .rd_strobe = 26,
+ .rd_hold = 3,
+ .turn_around = 1,
+ .width = ASYNC_EMIF_8,
+ },
+};
+
+static struct pll_init_data pll_config[] = {
+ {
+ .pll = ETH_PLL,
+ .internal_osc = 1,
+ .pll_freq = 500000000,
+ .div_freq = {
+ 5000000, 50000000, 125000000, 250000000, 25000000,
+ },
+ },
+};
+
+static const short sdio1_pins[] = {
+ TNETV107X_PIN_SDIO1_CLK_1, TNETV107X_PIN_SDIO1_CMD_1,
+ TNETV107X_PIN_SDIO1_DATA0_1, TNETV107X_PIN_SDIO1_DATA1_1,
+ TNETV107X_PIN_SDIO1_DATA2_1, TNETV107X_PIN_SDIO1_DATA3_1,
+ -1
+};
+
+static const short uart1_pins[] = {
+ TNETV107X_PIN_UART1_RD, TNETV107X_PIN_UART1_TD, -1
+};
+
+static const short ssp_pins[] = {
+ TNETV107X_PIN_SSP0_0, TNETV107X_PIN_SSP0_1, TNETV107X_PIN_SSP0_2,
+ TNETV107X_PIN_SSP1_0, TNETV107X_PIN_SSP1_1, TNETV107X_PIN_SSP1_2,
+ TNETV107X_PIN_SSP1_3, -1
+};
+
+int board_init(void)
+{
+#ifndef CONFIG_USE_IRQ
+ __raw_writel(0, INTC_GLB_EN); /* Global disable */
+ __raw_writel(0, INTC_HINT_EN); /* Disable host ints */
+ __raw_writel(0, INTC_EN_CLR0 + 0); /* Clear enable */
+ __raw_writel(0, INTC_EN_CLR0 + 4); /* Clear enable */
+ __raw_writel(0, INTC_EN_CLR0 + 8); /* Clear enable */
+#endif
+
+ gd->bd->bi_arch_number = MACH_TYPE_TNETV107X;
+ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+ init_plls(ARRAY_SIZE(pll_config), pll_config);
+
+ init_async_emif(ARRAY_SIZE(async_emif_config), async_emif_config);
+
+ mux_select_pin(TNETV107X_PIN_ASR_CS3);
+ mux_select_pins(sdio1_pins);
+ mux_select_pins(uart1_pins);
+ mux_select_pins(ssp_pins);
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return 0;
+}
+
+#ifdef CONFIG_NAND_DAVINCI
+int board_nand_init(struct nand_chip *nand)
+{
+ davinci_nand_init(nand);
+
+ return 0;
+}
+#endif
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index 60ba007..08f837b 100644
--- a/drivers/spi/davinci_spi.c
+++ b/drivers/spi/davinci_spi.c
@@ -113,7 +113,8 @@ int spi_claim_bus(struct spi_slave *slave)
writel(0, &ds->regs->lvl);
/* enable SPI */
- writel((readl(&ds->regs->gcr1) | SPIGCR1_SPIENA_MASK), &ds->regs->gcr1);
+ writel((readl(&ds->regs->gcr1) |
+ SPIGCR1_SPIENA_MASK), &ds->regs->gcr1);
return 0;
}
@@ -131,12 +132,10 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
{
struct davinci_spi_slave *ds = to_davinci_spi(slave);
unsigned int len, data1_reg_val = readl(&ds->regs->dat1);
- int ret, i;
+ unsigned int i_cnt = 0, o_cnt = 0, buf_reg_val;
const u8 *txp = dout; /* dout can be NULL for read operation */
u8 *rxp = din; /* din can be NULL for write operation */
- ret = 0;
-
if (bitlen == 0)
/* Finish any previously submitted transfers */
goto out;
@@ -159,41 +158,51 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
readl(&ds->regs->buf);
/* keep writing and reading 1 byte until done */
- for (i = 0; i < len; i++) {
- /* wait till TXFULL is asserted */
- while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK);
-
- /* write the data */
- data1_reg_val &= ~0xFFFF;
- if (txp) {
- data1_reg_val |= *txp;
- txp++;
+ while ((i_cnt < len) || (o_cnt < len)) {
+ /* read RX buffer and flags */
+ buf_reg_val = readl(&ds->regs->buf);
+
+ /* if data is available */
+ if ((i_cnt < len) &&
+ (buf_reg_val & SPIBUF_RXEMPTY_MASK) == 0) {
+ /*
+ * If there is no read buffer simply
+ * ignore the read character
+ */
+ if (rxp)
+ *rxp++ = buf_reg_val & 0xFF;
+ /* increment read words count */
+ i_cnt++;
}
/*
- * Write to DAT1 is required to keep the serial transfer going.
- * We just terminate when we reach the end.
+ * if the tx buffer is empty and there
+ * is still data to transmit
*/
- if ((i == (len - 1)) && (flags & SPI_XFER_END)) {
- /* clear CS hold */
- writel(data1_reg_val &
- ~(1 << SPIDAT1_CSHOLD_SHIFT), &ds->regs->dat1);
- } else {
- /* enable CS hold */
- data1_reg_val |= ((1 << SPIDAT1_CSHOLD_SHIFT) |
+ if ((o_cnt < len) &&
+ ((buf_reg_val & SPIBUF_TXFULL_MASK) == 0)) {
+ /* write the data */
+ data1_reg_val &= ~0xFFFF;
+ if (txp)
+ data1_reg_val |= *txp++;
+ /*
+ * Write to DAT1 is required to keep
+ * the serial transfer going.
+ * We just terminate when we reach the end.
+ */
+ if ((o_cnt == (len - 1)) && (flags & SPI_XFER_END)) {
+ /* clear CS hold */
+ writel(data1_reg_val &
+ ~(1 << SPIDAT1_CSHOLD_SHIFT),
+ &ds->regs->dat1);
+ } else {
+ /* enable CS hold and write TX register */
+ data1_reg_val |= ((1 << SPIDAT1_CSHOLD_SHIFT) |
(slave->cs << SPIDAT1_CSNR_SHIFT));
- writel(data1_reg_val, &ds->regs->dat1);
- }
-
- /* read the data - wait for data availability */
- while (readl(&ds->regs->buf) & SPIBUF_RXEMPTY_MASK);
-
- if (rxp) {
- *rxp = readl(&ds->regs->buf) & 0xFF;
- rxp++;
- } else {
- /* simply drop the read character */
- readl(&ds->regs->buf);
+ writel(data1_reg_val, &ds->regs->dat1);
+ }
+ /* increment written words count */
+ o_cnt++;
}
}
return 0;
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
new file mode 100644
index 0000000..513d005
--- /dev/null
+++ b/include/configs/am3517_evm.h
@@ -0,0 +1,296 @@
+/*
+ * am3517_evm.h - Default configuration for AM3517 EVM board.
+ *
+ * Author: Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Based on omap3_evm_config.h
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
+#define CONFIG_OMAP 1 /* in a TI OMAP core */
+#define CONFIG_OMAP34XX 1 /* which is a 34XX */
+#define CONFIG_OMAP3_AM3517EVM 1 /* working with AM3517EVM */
+
+#define CONFIG_EMIF4 /* The chip has EMIF4 controller */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO 1
+#define CONFIG_DISPLAY_BOARDINFO 1
+
+/* Clock Defines */
+#define V_OSCK 26000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ /* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+#define CONFIG_REVISION_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */
+ /* initial data */
+/*
+ * DDR related
+ */
+#define CONFIG_OMAP3_MICRON_DDR 1 /* Micron DDR */
+#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024)
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+#define CONFIG_SERIAL3 3 /* UART3 on AM3517 EVM */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
+ 115200}
+#define CONFIG_MMC 1
+#define CONFIG_OMAP3_MMC 1
+#define CONFIG_DOS_PARTITION 1
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
+
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_NAND /* NAND support */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+
+#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMI /* iminfo */
+#undef CONFIG_CMD_IMLS /* List all found images */
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_BUS 0
+#define CONFIG_SYS_I2C_BUS_SELECT 1
+#define CONFIG_DRIVER_OMAP34XX_I2C 1
+
+#undef CONFIG_CMD_NET
+/*
+ * Board NAND Info.
+ */
+#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
+ /* to access nand */
+#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
+ /* to access */
+ /* nand at CS0 */
+
+#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
+ /* NAND devices */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
+#define CONFIG_JFFS2_NAND
+/* nand device jffs2 lives on */
+#define CONFIG_JFFS2_DEV "nand0"
+/* start of jffs2 partition */
+#define CONFIG_JFFS2_PART_OFFSET 0x680000
+#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */
+
+/* Environment information */
+#define CONFIG_BOOTDELAY 10
+
+#define CONFIG_BOOTFILE uImage
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x82000000\0" \
+ "console=ttyS2,115200n8\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "root=/dev/mmcblk0p2 rw " \
+ "rootfstype=ext3 rootwait\0" \
+ "nandargs=setenv bootargs console=${console} " \
+ "root=/dev/mtdblock4 rw " \
+ "rootfstype=jffs2\0" \
+ "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source ${loadaddr}\0" \
+ "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${loadaddr} 280000 400000; " \
+ "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "if mmc init; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run nandboot; " \
+ "fi; " \
+ "fi; " \
+ "else run nandboot; fi"
+
+#define CONFIG_AUTO_COMPLETE 1
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT "AM3517_EVM # "
+
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT V_PROMPT
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 32 /* max number of command */
+ /* args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
+#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
+ 0x01F00000) /* 31MB */
+
+#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
+ /* address */
+
+/*
+ * AM3517 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
+#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
+#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
+#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C 1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/* **** PISMO SUPPORT *** */
+
+/* Configure the PISMO */
+#define PISMO1_NAND_SIZE GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
+
+#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
+ /* on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+
+#define CONFIG_SYS_FLASH_BASE boot_flash_base
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+
+#define CONFIG_NAND_OMAP_GPMC
+#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
+#define CONFIG_ENV_IS_IN_NAND 1
+#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
+
+#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
+#define CONFIG_ENV_OFFSET boot_flash_off
+#define CONFIG_ENV_ADDR boot_flash_env_addr
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+/* timeout values are in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
+
+/* Flash banks JFFS2 should use */
+#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
+ CONFIG_SYS_MAX_NAND_DEVICE)
+#define CONFIG_SYS_JFFS2_MEM_NAND
+/* use flash_info[2] */
+#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS 1
+
+#ifndef __ASSEMBLY__
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 7d1332f..1076de6 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -38,6 +38,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */
+#define CONFIG_SDRC /* The chip has SDRC controller */
+
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap3.h>
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 08d79ac..e018b21 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -37,6 +37,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */
+#define CONFIG_SDRC /* The chip has SDRC controller */
+
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap3.h>
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 0d99f7d..af7c65a 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -42,6 +42,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_EVM 1 /* working with EVM */
+#define CONFIG_SDRC /* The chip has SDRC controller */
+
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap3.h>
@@ -151,7 +153,7 @@
#define CONFIG_CMD_I2C /* I2C serial bus support */
#define CONFIG_CMD_MMC /* MMC support */
-#define CONFIG_CMD_ONENAND /* ONENAND support */
+#define CONFIG_CMD_NAND /* NAND support */
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
@@ -306,7 +308,13 @@
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
+#if defined(CONFIG_CMD_NAND)
+#define CONFIG_NAND_OMAP_GPMC
+#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
+#define CONFIG_ENV_IS_IN_NAND
+#elif defined(CONFIG_CMD_ONENAND)
#define CONFIG_ENV_IS_IN_ONENAND 1
+#endif
#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index a43500b..b441831 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -29,6 +29,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_OVERO 1 /* working with overo */
+#define CONFIG_SDRC /* The chip has SDRC controller */
+
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap3.h>
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index 945c053..9eba003 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -32,6 +32,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_PANDORA 1 /* working with pandora */
+#define CONFIG_SDRC /* The chip has SDRC controller */
+
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap3.h>
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index b4919db..d4482d3 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -42,6 +42,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */
+#define CONFIG_SDRC /* The chip has SDRC controller */
+
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap3.h>
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index ae7ebf9..1e88dc0 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -38,6 +38,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */
+#define CONFIG_SDRC /* The chip has SDRC controller */
+
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap3.h>
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index c88c732..be9daf4 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -39,6 +39,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_ZOOM2 1 /* working with Zoom II */
+#define CONFIG_SDRC /* The chip has SDRC controller */
+
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap3.h>
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
new file mode 100644
index 0000000..690f119
--- /dev/null
+++ b/include/configs/pm9g45.h
@@ -0,0 +1,186 @@
+/*
+ * (C) Copyright 2010
+ * Ilko Iliev <iliev@ronetix.at>
+ * Asen Dimov <dimov@ronetix.at>
+ * Ronetix GmbH <www.ronetix.at>
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the PM9G45 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */
+#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC */
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_AT91_GPIO 1
+#define CONFIG_ATMEL_USART 1
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+#define CONFIG_SYS_USE_NANDFLASH 1
+
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIO_PORTD, 31 /* this is the user1 led */
+#define CONFIG_GREEN_LED AT91_PIO_PORTD, 0 /* this is the user2 led */
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE 1
+#define CONFIG_BOOTP_BOOTPATH 1
+#define CONFIG_BOOTP_GATEWAY 1
+#define CONFIG_BOOTP_HOSTNAME 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_DHCP 1
+#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_USB 1
+
+#define CONFIG_CMD_JFFS2 1
+#define CONFIG_JFFS2_CMDLINE 1
+#define CONFIG_JFFS2_NAND 1
+#define CONFIG_JFFS2_DEV "nand0" /* NAND dev jffs2 lives on */
+#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
+#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition */
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x70000000
+#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
+
+/* NOR flash, not available */
+#define CONFIG_SYS_NO_FLASH 1
+#undef CONFIG_CMD_FLASH
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_MAX_CHIPS 1
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8 1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 3
+
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB 1
+#define CONFIG_RMII 1
+#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_RESET_PHY_R 1
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* _UHP_OHCI_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+
+/* board specific(not enough SRAM) */
+#define CONFIG_AT91SAM9G45_LCD_BASE PHYS_SDRAM + 0xE00000
+
+#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM + 0x2000000 /* load addr */
+
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END CONFIG_AT91SAM9G45_LCD_BASE
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_OFFSET 0x60000
+#define CONFIG_ENV_OFFSET_REDUND 0x80000
+#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm"
+#define CONFIG_BOOTARGS "fbcon=rotate:3 console=tty0 " \
+ "console=ttyS0,115200 " \
+ "root=/dev/mtdblock4 " \
+ "mtdparts=atmel_nand:128k(bootstrap)ro," \
+ "256k(uboot)ro,1664k(env)," \
+ "2M(linux)ro,-(root) rw " \
+ "rootfstype=jffs2"
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
+ 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
index f04feae..624fe04 100644
--- a/include/configs/smdk6400.h
+++ b/include/configs/smdk6400.h
@@ -40,6 +40,12 @@
#define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */
#define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+#define CONFIG_PERIPORT_REMAP
+#define CONFIG_PERIPORT_BASE 0x70000000
+#define CONFIG_PERIPORT_SIZE 0x13
+
#define CONFIG_SYS_SDRAM_BASE 0x50000000
/* input clock of PLL: SMDK6400 has 12MHz input clock */
@@ -61,8 +67,6 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
/*
* Size of malloc() pool
*/
diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h
new file mode 100644
index 0000000..454e9b2
--- /dev/null
+++ b/include/configs/tnetv107x_evm.h
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com>
+ *
+ * Based on davinci_dvevm.h. Original Copyrights follow:
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/sizes.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+
+/* Architecture, CPU, etc */
+#define CONFIG_ARM1176
+#define CONFIG_TNETV107X
+#define CONFIG_TNETV107X_EVM
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_UBOOT_BASE TEXT_BASE
+#define CONFIG_DISABLE_TCM
+#define CONFIG_PERIPORT_REMAP
+#define CONFIG_PERIPORT_BASE 0x2000000
+#define CONFIG_PERIPORT_SIZE 0x10
+#define CONFIG_SYS_CLK_FREQ clk_get_rate(TNETV107X_LPSC_ARM)
+
+#define CONFIG_SYS_TIMERBASE TNETV107X_TIMER0_BASE
+#define CONFIG_SYS_HZ_CLOCK clk_get_rate(TNETV107X_LPSC_TIMER0)
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_PLL_SYS_EXT_FREQ 25000000
+#define CONFIG_PLL_TDM_EXT_FREQ 19200000
+#define CONFIG_PLL_ETH_EXT_FREQ 25000000
+
+/* Memory Info */
+#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+#define PHYS_SDRAM_1 TNETV107X_DDR_EMIF_DATA_BASE
+#define PHYS_SDRAM_1_SIZE 0x04000000
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
+#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024)
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_STACKSIZE (256*1024)
+
+/* Serial Driver Info */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550_COM1 TNETV107X_UART1_BASE
+#define CONFIG_SYS_NS16550_CLK clk_get_rate(TNETV107X_LPSC_UART1)
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* Flash and environment info */
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_NAND_DAVINCI
+#define CONFIG_ENV_SIZE (SZ_128K)
+#define CONFIG_SYS_NAND_HW_ECC
+#define CONFIG_SYS_NAND_1BIT_ECC
+#define CONFIG_SYS_NAND_CS 2
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_BASE TNETV107X_ASYNC_EMIF_DATA_CE0_BASE
+#define CONFIG_SYS_CLE_MASK 0x10
+#define CONFIG_SYS_ALE_MASK 0x8
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_JFFS2_NAND
+#define NAND_MAX_CHIPS 1
+#define CONFIG_ENV_OFFSET 0x180000
+#define DEF_BOOTM ""
+
+/*
+ * davinci_nand is a bit of a misnomer since this particular EMIF block is
+ * commonly used across multiple TI devices. Unfortunately, this misnomer
+ * (amongst others) carries forward into the kernel too. Consequently, if we
+ * use a different device name here, the mtdparts variable won't be usable as
+ * a kernel command-line argument.
+ */
+#define MTDIDS_DEFAULT "nand0=davinci_nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \
+ "1536k(uboot)ro," \
+ "128k(params)ro," \
+ "4m(kernel)," \
+ "-(filesystem)"
+
+/* General U-Boot configuration */
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_SYS_PROMPT "U-Boot > "
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_MAXARGS 64
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_MEMTEST_START + \
+ 0x700000)
+#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100)
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS "mem=32M console=ttyS1,115200n8 " \
+ "root=/dev/mmcblk0p1 rw noinitrd"
+#define CONFIG_BOOTCOMMAND ""
+#define CONFIG_BOOTDELAY 1
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EDITENV
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_ITEST
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_JFFS2
+
+#endif /* __CONFIG_H */