diff options
32 files changed, 117 insertions, 162 deletions
@@ -56,7 +56,7 @@ LONG_OPTS="arch:,cpu:,vendor:,soc:" # Option processing based on util-linux-2.13/getopt-parse.bash -# Note that we use `"$@"' to let each command-line parameter expand to a +# Note that we use `"$@"' to let each command-line parameter expand to a # separate word. The quotes around `$@' are essential! # We need TEMP as the `eval set --' would nuke the return value of # getopt. @@ -2364,11 +2364,11 @@ Configuration Settings: - CONFIG_ENV_MAX_ENTRIES - Maximum number of entries in the hash table that is used - internally to store the environment settings. The default - setting is supposed to be generous and should work in most - cases. This setting can be used to tune behaviour; see - lib/hashtable.c for details. + Maximum number of entries in the hash table that is used + internally to store the environment settings. The default + setting is supposed to be generous and should work in most + cases. This setting can be used to tune behaviour; see + lib/hashtable.c for details. The following definitions that deal with the placement and management of environment data (variable area); in general, we support the diff --git a/arch/arm/cpu/arm926ejs/kirkwood/dram.c b/arch/arm/cpu/arm926ejs/kirkwood/dram.c index 7439c87..342afe9 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/dram.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/dram.c @@ -93,4 +93,3 @@ void dram_init_banksize(void) dram_init(); } #endif /* CONFIG_SYS_BOARD_DRAM_INIT */ - diff --git a/arch/arm/cpu/pxa/cpu.c b/arch/arm/cpu/pxa/cpu.c index 3ea3458..7d49cbb 100644 --- a/arch/arm/cpu/pxa/cpu.c +++ b/arch/arm/cpu/pxa/cpu.c @@ -312,7 +312,7 @@ void pxa_wakeup(void) int arch_cpu_init(void) { pxa_gpio_setup(); -// pxa_wait_ticks(0x8000); +/* pxa_wait_ticks(0x8000); */ pxa_wakeup(); pxa_interrupt_setup(); pxa_clock_setup(); diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index d44903b..93a9efd 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -98,7 +98,7 @@ _start: * 0xC: 0xB808XXXX * * then it is necessary to count address for storing the most significant - * 16bits from _exception_handler address and copy it to + * 16bits from _exception_handler address and copy it to * 0xa address. Big endian use offset in r10=0 that's why is it just * 0xa address. The same is done for the least significant 16 bits * for 0xe address. diff --git a/arch/sh/lib/bootm.c b/arch/sh/lib/bootm.c index f38d0b0..19b3a94 100644 --- a/arch/sh/lib/bootm.c +++ b/arch/sh/lib/bootm.c @@ -109,7 +109,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima ramdisk_flags |= RD_PROMPT; else ramdisk_flags &= ~RD_PROMPT; - + val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10); if (val == 1) ramdisk_flags |= RD_DOLOAD; diff --git a/board/bct-brettl2/cled.c b/board/bct-brettl2/cled.c index 9e73c57..dcb91bd 100644 --- a/board/bct-brettl2/cled.c +++ b/board/bct-brettl2/cled.c @@ -13,7 +13,7 @@ int do_cled(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - ulong addr = 0x20000000 + 0x200000; // AMS2 + ulong addr = 0x20000000 + 0x200000; /* AMS2 */ uchar data; if (argc < 2) diff --git a/board/davedenx/qong/fpga.c b/board/davedenx/qong/fpga.c index f865eb4..656d5cd 100644 --- a/board/davedenx/qong/fpga.c +++ b/board/davedenx/qong/fpga.c @@ -92,4 +92,3 @@ int qong_fpga_init(void) } #endif - diff --git a/board/isee/igep0030/config.mk b/board/isee/igep0030/config.mk index 35865e0..019f93f 100644 --- a/board/isee/igep0030/config.mk +++ b/board/isee/igep0030/config.mk @@ -31,4 +31,3 @@ # For use with external or internal boots. TEXT_BASE = 0x80008000 - diff --git a/board/xes/common/fsl_8xxx_misc.c b/board/xes/common/fsl_8xxx_misc.c index b7fa695..36e9146 100644 --- a/board/xes/common/fsl_8xxx_misc.c +++ b/board/xes/common/fsl_8xxx_misc.c @@ -52,11 +52,9 @@ uint get_board_derivative(void) #endif /* - * The top 4 lines of the local bus address are pulled low/high and - * can be read to determine the least significant digit of a board's - * model number. - */ + * The top 4 lines of the local bus address are pulled low/high and + * can be read to determine the least significant digit of a board's + * model number. + */ return gur->gpporcr >> 28; } - - diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c index 718cd98..38a4597 100644 --- a/board/xes/xpedite550x/ddr.c +++ b/board/xes/xpedite550x/ddr.c @@ -55,16 +55,16 @@ unsigned int fsl_ddr_get_mem_data_rate(void) * There are traditionally three board-specific SDRAM timing parameters * which must be calculated based on the particular PCB artwork. These are: * 1.) CPO (Read Capture Delay) - * - TIMING_CFG_2 register - * Source: Calculation based on board trace lengths and - * chip-specific internal delays. + * - TIMING_CFG_2 register + * Source: Calculation based on board trace lengths and + * chip-specific internal delays. * 2.) CLK_ADJUST (Clock and Addr/Cmd alignment control) - * - DDR_SDRAM_CLK_CNTL register - * Source: Signal Integrity Simulations + * - DDR_SDRAM_CLK_CNTL register + * Source: Signal Integrity Simulations * 3.) 2T Timing on Addr/Ctl - * - TIMING_CFG_2 register - * Source: Signal Integrity Simulations - * Usually only needed with heavy load/very high speed (>DDR2-800) + * - TIMING_CFG_2 register + * Source: Signal Integrity Simulations + * Usually only needed with heavy load/very high speed (>DDR2-800) * * ====== XPedite550x DDR3-800 read delay calculations ====== * @@ -82,14 +82,14 @@ typedef struct { const board_specific_parameters_t board_specific_parameters[][20] = { { /* Controller 0 */ - { + { /* DDR3-600/667 */ .datarate_mhz_low = 500, .datarate_mhz_high = 750, .clk_adjust = 5, .cpo = 31, }, - { + { /* DDR3-800 */ .datarate_mhz_low = 750, .datarate_mhz_high = 850, @@ -162,4 +162,3 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->rtt_override = 1; popts->rtt_override_value = 3; } - diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation index 3856633..dc7be7e 100644 --- a/doc/README.arm-relocation +++ b/doc/README.arm-relocation @@ -93,7 +93,7 @@ Relocation with NAND_SPL (example for the tx25): and start with code execution on this address. - The First page contains u-boot code from u-boot:nand_spl/nand_boot_fsl_nfc.c - which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE and loads + which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE and loads the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution @CONFIG_SYS_NAND_U_BOOT_START @@ -162,7 +162,7 @@ e) load new symbol table: (gdb) add-symbol-file u-boot 0x8ff08000 add symbol table from file "u-boot" at - .text_addr = 0x8ff08000 + .text_addr = 0x8ff08000 (y or n) y Reading symbols from /home/hs/celf/u-boot/u-boot...done. (gdb) c @@ -170,12 +170,12 @@ Continuing. ^C Program received signal SIGSTOP, Stopped (signal). 0x8ff17f18 in serial_getc () at serial_mxc.c:192 -192 while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY); +192 while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY); (gdb) add-symbol-file u-boot 0x8ff08000 - ^^^^^^^^^^ - get this address from u-boot debug printfs + ^^^^^^^^^^ + get this address from u-boot debug printfs U-Boot 2010.06-rc2-00009-gf77b8b8-dirty (Jun 22 2010 - 09:43:46) @@ -187,7 +187,7 @@ Top of RAM usable for U-Boot at: 90000000 LCD panel info: 640 x 480, 16 bit/pix Reserving 600k for LCD Framebuffer at: 8ff6a000 Reserving 391k for U-Boot at: 8ff08000 - ^^^^^^^^ + ^^^^^^^^ Reserving 1280k for malloc() at: 8fdc8000 Reserving 24 Bytes for Board Info at: 8fdc7fe8 Reserving 52 Bytes for Global Data at: 8fdc7fb4 @@ -197,6 +197,6 @@ Bank #0: 80000000 256 MiB relocation Offset is: eff08000 mon: 00058BAC gd->monLen: 00061F10 Now running in RAM - U-Boot at: 8ff08000 - ^^^^^^^^ + ^^^^^^^^ Now you can use gdb as usual :-) diff --git a/drivers/fpga/lattice.c b/drivers/fpga/lattice.c index a0e7823..c3b2355 100644 --- a/drivers/fpga/lattice.c +++ b/drivers/fpga/lattice.c @@ -395,5 +395,3 @@ int lattice_info(Lattice_desc *desc) return ret_val; } - - diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 9271470..c7f7620 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -412,4 +412,3 @@ int omap_mmc_init(int dev_index) return 0; } - diff --git a/drivers/serial/atmel_usart.h b/drivers/serial/atmel_usart.h index 7cfc2d5..7e4b2c9 100644 --- a/drivers/serial/atmel_usart.h +++ b/drivers/serial/atmel_usart.h @@ -42,7 +42,7 @@ typedef struct atmel_usart3 { u32 reserved1; u32 ifr; u32 man; - u32 reserved2[54]; // version and PDC not needed + u32 reserved2[54]; /* version and PDC not needed */ } atmel_usart3_t; /* Bitfields in CR */ diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index cf22629..f9163a8 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -116,4 +116,3 @@ int usb_gadget_config_buf( cp->bmAttributes |= USB_CONFIG_ATT_ONE; return len; } - diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 7cf3c67..1896489 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -302,4 +302,3 @@ void usb_ep_autoconfig_reset(struct usb_gadget *gadget) #endif epnum = 0; } - diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index b22ca90..5a18e03 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -1968,4 +1968,3 @@ fail: error("%s failed. error = %d", __func__, status); return status; } - diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 6e9d1bf..95555cf 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -137,4 +137,3 @@ usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf) buf[1] = USB_DT_STRING; return buf[0]; } - diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index 20c119a..b5d20bd 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -79,7 +79,7 @@ #define CONFIG_SYS_XLB_PIPELINING 1 #undef CONFIG_NET_MULTI -#undef CONFIG_EEPRO100 +#undef CONFIG_EEPRO100 /* Partitions */ #define CONFIG_MAC_PARTITION diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index 09691d3..608ab9f 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -11,7 +11,7 @@ /* * Processor Settings */ -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS /* @@ -21,11 +21,11 @@ */ /* CONFIG_CLKIN_HZ is any value in Hz */ #define CONFIG_CLKIN_HZ 16384000 -/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ -/* 1 = CLKIN / 2 */ +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ #define CONFIG_CLKIN_HALF 0 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ -/* 1 = bypass PLL */ +/* 1 = bypass PLL */ #define CONFIG_PLL_BYPASS 0 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ /* Values can range from 0-63 (where 0 means 64) */ @@ -36,7 +36,7 @@ /* SCLK_DIV controls the system clock divider */ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 3 -#define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000) +#define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000) /* @@ -111,13 +111,13 @@ * it linked after the configuration sector. */ # define LDS_BOARD_TEXT \ - arch/blackfin/cpu/traps.o (.text .text.*); \ - arch/blackfin/cpu/interrupt.o (.text .text.*); \ - arch/blackfin/cpu/serial.o (.text .text.*); \ - common/dlmalloc.o (.text .text.*); \ - lib/crc32.o (.text .text.*); \ - . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text .text.*); + arch/blackfin/cpu/traps.o (.text .text.*); \ + arch/blackfin/cpu/interrupt.o (.text .text.*); \ + arch/blackfin/cpu/serial.o (.text .text.*); \ + common/dlmalloc.o (.text .text.*); \ + lib/crc32.o (.text .text.*); \ + . = DEFINED(env_offset) ? env_offset : .; \ + common/env_embedded.o (.text .text.*); #endif diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h index 8b2bdc7..e4688a2 100644 --- a/include/configs/blackvme.h +++ b/include/configs/blackvme.h @@ -126,9 +126,9 @@ * AX88180 WEN = 5 clocks REN 6 clocks @ SCLK = 100 MHz * One extra clock needed because AX88180 is asynchronous to CPU. */ - /* bank 1 0 */ + /* bank 1 0 */ #define CONFIG_EBIU_AMBCTL0_VAL 0xFFC2FFC2 - /* bank 3 2 */ + /* bank 3 2 */ #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC2FFC2 /* memory layout */ diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 21b7ec7..166da6c 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -60,8 +60,6 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - - /* * CS8900 Ethernet drivers */ @@ -79,7 +77,6 @@ #define CONFIG_BAUDRATE 115200 - /* * BOOTP options */ @@ -88,7 +85,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ @@ -98,7 +94,6 @@ #define CONFIG_CMD_REGINFO #define CONFIG_CMD_ELF - #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=/dev/msdk mem=48M" #define CONFIG_BOOTFILE "mx1ads" diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h index 0641bef..1632ce8 100644 --- a/include/configs/mx1fs2.h +++ b/include/configs/mx1fs2.h @@ -34,7 +34,6 @@ #undef _CONFIG_UART4 /* internal uart 4 */ #undef CONFIG_SILENT_CONSOLE /* use this to disable output */ - /* * BOOTP options */ @@ -43,7 +42,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ @@ -58,7 +56,6 @@ #undef CONFIG_CMD_PING #undef CONFIG_CMD_SOURCE - /* * Boot options. Setting delay to -1 stops autostart count down. */ @@ -98,8 +95,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) - - #define CONFIG_STACKSIZE (120<<10) /* stack size */ #ifdef CONFIG_USE_IRQ diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index c0ae2d9..3da214e 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -35,7 +35,6 @@ * Select serial console configuration */ - /* * BOOTP options */ @@ -44,7 +43,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ @@ -58,7 +56,6 @@ #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_SOURCE - /* * Boot options. Setting delay to -1 stops autostart count down. * NOTE: Sending parameters to kernel depends on kernel version and @@ -100,14 +97,11 @@ #define CONFIG_INITRD_TAG 1 /* send initrd params */ #undef CONFIG_VFD /* do not send framebuffer setup */ - /* * Malloc pool need to host env + 128 Kb reserve for other allocations. */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) - - #define CONFIG_STACKSIZE (120<<10) /* stack size */ #ifdef CONFIG_USE_IRQ @@ -134,15 +128,6 @@ #define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */ /* - * Flash Controller settings - */ - -/* - * Hardware drivers - */ - - -/* * Configuration for FLASH memory for the Synertronixx board */ diff --git a/include/lattice.h b/include/lattice.h index 75729b6..e965663 100755 --- a/include/lattice.h +++ b/include/lattice.h @@ -317,4 +317,3 @@ void writePort(unsigned char pins, unsigned char value); unsigned char readPort(void); void sclock(void); #endif - diff --git a/include/linux/fb.h b/include/linux/fb.h index f4ac4bf..3858f8f 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -26,13 +26,13 @@ struct fb_fix_screeninfo { __u32 type; /* see FB_TYPE_* */ __u32 type_aux; /* Interleave for interleaved Planes */ __u32 visual; /* see FB_VISUAL_* */ - __u16 xpanstep; /* zero if no hardware panning */ - __u16 ypanstep; /* zero if no hardware panning */ - __u16 ywrapstep; /* zero if no hardware ywrap */ - __u32 line_length; /* length of a line in bytes */ - unsigned long mmio_start; /* Start of Memory Mapped I/O */ + __u16 xpanstep; /* zero if no hardware panning */ + __u16 ypanstep; /* zero if no hardware panning */ + __u16 ywrapstep; /* zero if no hardware ywrap */ + __u32 line_length; /* length of a line in bytes */ + unsigned long mmio_start; /* Start of Memory Mapped I/O */ /* (physical address) */ - __u32 mmio_len; /* Length of Memory Mapped I/O */ + __u32 mmio_len; /* Length of Memory Mapped I/O */ __u32 accel; /* Indicate to driver which */ /* specific chip/card we have */ __u16 reserved[3]; /* Reserved for future compatibility */ @@ -56,7 +56,7 @@ struct fb_bitfield { }; -#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */ +#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */ #define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */ #define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/ @@ -64,38 +64,38 @@ struct fb_bitfield { #define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */ #define FB_ACTIVATE_MASK 15 /* values */ -#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */ +#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */ #define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */ #define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */ #define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/ -#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */ +#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */ #define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */ #define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */ #define FB_SYNC_EXT 4 /* external sync */ -#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */ -#define FB_SYNC_BROADCAST 16 /* broadcast video timings */ +#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */ +#define FB_SYNC_BROADCAST 16 /* broadcast video timings */ /* vtotal = 144d/288n/576i => PAL */ /* vtotal = 121d/242n/484i => NTSC */ #define FB_SYNC_ON_GREEN 32 /* sync on green */ -#define FB_VMODE_NONINTERLACED 0 /* non interlaced */ +#define FB_VMODE_NONINTERLACED 0 /* non interlaced */ #define FB_VMODE_INTERLACED 1 /* interlaced */ #define FB_VMODE_DOUBLE 2 /* double scan */ #define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */ #define FB_VMODE_MASK 255 -#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */ +#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */ #define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */ #define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */ /* * Display rotation support */ -#define FB_ROTATE_UR 0 -#define FB_ROTATE_CW 1 -#define FB_ROTATE_UD 2 -#define FB_ROTATE_CCW 3 +#define FB_ROTATE_UR 0 +#define FB_ROTATE_CW 1 +#define FB_ROTATE_UD 2 +#define FB_ROTATE_CCW 3 #define PICOS2KHZ(a) (1000000000UL/(a)) #define KHZ2PICOS(a) (1000000000UL/(a)) @@ -154,10 +154,10 @@ struct fb_con2fbmap { }; /* VESA Blanking Levels */ -#define VESA_NO_BLANKING 0 -#define VESA_VSYNC_SUSPEND 1 -#define VESA_HSYNC_SUSPEND 2 -#define VESA_POWERDOWN 3 +#define VESA_NO_BLANKING 0 +#define VESA_VSYNC_SUSPEND 1 +#define VESA_HSYNC_SUSPEND 2 +#define VESA_POWERDOWN 3 enum { @@ -234,12 +234,12 @@ struct fb_image { */ #define FB_CUR_SETIMAGE 0x01 -#define FB_CUR_SETPOS 0x02 -#define FB_CUR_SETHOT 0x04 -#define FB_CUR_SETCMAP 0x08 +#define FB_CUR_SETPOS 0x02 +#define FB_CUR_SETHOT 0x04 +#define FB_CUR_SETCMAP 0x08 #define FB_CUR_SETSHAPE 0x10 #define FB_CUR_SETSIZE 0x20 -#define FB_CUR_SETALL 0xFF +#define FB_CUR_SETALL 0xFF struct fbcurpos { __u16 x, y; @@ -377,29 +377,29 @@ struct fb_cursor_user { * if you own it */ #define FB_EVENT_RESUME 0x03 -/* An entry from the modelist was removed */ -#define FB_EVENT_MODE_DELETE 0x04 -/* A driver registered itself */ -#define FB_EVENT_FB_REGISTERED 0x05 -/* A driver unregistered itself */ -#define FB_EVENT_FB_UNREGISTERED 0x06 -/* CONSOLE-SPECIFIC: get console to framebuffer mapping */ -#define FB_EVENT_GET_CONSOLE_MAP 0x07 -/* CONSOLE-SPECIFIC: set console to framebuffer mapping */ -#define FB_EVENT_SET_CONSOLE_MAP 0x08 -/* A hardware display blank change occured */ -#define FB_EVENT_BLANK 0x09 -/* Private modelist is to be replaced */ -#define FB_EVENT_NEW_MODELIST 0x0A +/* An entry from the modelist was removed */ +#define FB_EVENT_MODE_DELETE 0x04 +/* A driver registered itself */ +#define FB_EVENT_FB_REGISTERED 0x05 +/* A driver unregistered itself */ +#define FB_EVENT_FB_UNREGISTERED 0x06 +/* CONSOLE-SPECIFIC: get console to framebuffer mapping */ +#define FB_EVENT_GET_CONSOLE_MAP 0x07 +/* CONSOLE-SPECIFIC: set console to framebuffer mapping */ +#define FB_EVENT_SET_CONSOLE_MAP 0x08 +/* A hardware display blank change occured */ +#define FB_EVENT_BLANK 0x09 +/* Private modelist is to be replaced */ +#define FB_EVENT_NEW_MODELIST 0x0A /* The resolution of the passed in fb_info about to change and - all vc's should be changed */ + all vc's should be changed */ #define FB_EVENT_MODE_CHANGE_ALL 0x0B /* A software display blank change occured */ -#define FB_EVENT_CONBLANK 0x0C -/* Get drawing requirements */ -#define FB_EVENT_GET_REQ 0x0D -/* Unbind from the console if possible */ -#define FB_EVENT_FB_UNBIND 0x0E +#define FB_EVENT_CONBLANK 0x0C +/* Get drawing requirements */ +#define FB_EVENT_GET_REQ 0x0D +/* Unbind from the console if possible */ +#define FB_EVENT_FB_UNBIND 0x0E struct fb_event { struct fb_info *info; @@ -421,10 +421,10 @@ struct fb_blit_caps { * format the hardware needs. */ -#define FB_PIXMAP_DEFAULT 1 /* used internally by fbcon */ -#define FB_PIXMAP_SYSTEM 2 /* memory is in system RAM */ -#define FB_PIXMAP_IO 4 /* memory is iomapped */ -#define FB_PIXMAP_SYNC 256 /* set if GPU can DMA */ +#define FB_PIXMAP_DEFAULT 1 /* used internally by fbcon */ +#define FB_PIXMAP_SYSTEM 2 /* memory is in system RAM */ +#define FB_PIXMAP_IO 4 /* memory is iomapped */ +#define FB_PIXMAP_SYNC 256 /* set if GPU can DMA */ struct fb_pixmap { u8 *addr; /* pointer to memory */ @@ -434,10 +434,10 @@ struct fb_pixmap { u32 scan_align; /* alignment per scanline */ u32 access_align; /* alignment per read/write (bits) */ u32 flags; /* see FB_PIXMAP_* */ - u32 blit_x; /* supported bit block dimensions (1-32)*/ - u32 blit_y; /* Format: blit_x = 1 << (width - 1) */ - /* blit_y = 1 << (height - 1) */ - /* if 0, will be set to 0xffffffff (all)*/ + u32 blit_x; /* supported bit block dimensions (1-32)*/ + u32 blit_y; /* Format: blit_x = 1 << (width - 1) */ + /* blit_y = 1 << (height - 1) */ + /* if 0, will be set to 0xffffffff (all)*/ /* access methods */ void (*writeio)(struct fb_info *info, void *dst, void *src, unsigned int size); void (*readio) (struct fb_info *info, void *dst, void *src, unsigned int size); @@ -488,7 +488,7 @@ struct fb_deferred_io { * meaning, it is set by the fb subsystem depending FOREIGN_ENDIAN flag * and host endianness. Drivers should not use this flag. */ -#define FBINFO_BE_MATH 0x100000 +#define FBINFO_BE_MATH 0x100000 struct fb_info { int node; @@ -499,7 +499,7 @@ struct fb_info { struct fb_pixmap pixmap; /* Image hardware mapper */ struct fb_pixmap sprite; /* Cursor hardware mapper */ struct fb_cmap cmap; /* Current cmap */ - struct list_head modelist; /* mode list */ + struct list_head modelist; /* mode list */ struct fb_videomode *mode; /* current mode */ char *screen_base; /* Virtual address */ @@ -508,7 +508,7 @@ struct fb_info { #define FBINFO_STATE_RUNNING 0 #define FBINFO_STATE_SUSPENDED 1 u32 state; /* Hardware state i.e suspend */ - void *fbcon_par; /* fbcon use-only private area */ + void *fbcon_par; /* fbcon use-only private area */ /* From here on everything is device dependent */ void *par; }; @@ -518,14 +518,14 @@ struct fb_info { #define FBINFO_FLAG_MODULE FBINFO_MODULE #define FBINFO_FLAG_DEFAULT FBINFO_DEFAULT -// This will go away +/* This will go away */ #if defined(__sparc__) /* We map all of our framebuffers such that big-endian accesses * are what we want, so the following is sufficient. */ -// This will go away +/* This will go away */ #define fb_readb sbus_readb #define fb_readw sbus_readw #define fb_readl sbus_readl @@ -562,7 +562,7 @@ struct fb_info { #endif -#define FB_LEFT_POS(p, bpp) (fb_be_math(p) ? (32 - (bpp)) : 0) +#define FB_LEFT_POS(p, bpp) (fb_be_math(p) ? (32 - (bpp)) : 0) #define FB_SHIFT_HIGH(p, val, bits) (fb_be_math(p) ? (val) >> (bits) : \ (val) << (bits)) #define FB_SHIFT_LOW(p, val, bits) (fb_be_math(p) ? (val) << (bits) : \ @@ -580,7 +580,7 @@ struct fb_info { #define FB_MODE_IS_VESA 4 #define FB_MODE_IS_CALCULATED 8 #define FB_MODE_IS_FIRST 16 -#define FB_MODE_IS_FROM_VAR 32 +#define FB_MODE_IS_FROM_VAR 32 /* drivers/video/fbcmap.c */ diff --git a/include/linux/kbuild.h b/include/linux/kbuild.h index be76384..ab7805a 100644 --- a/include/linux/kbuild.h +++ b/include/linux/kbuild.h @@ -7,7 +7,7 @@ #define __LINUX_KBUILD_H #define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) #define BLANK() asm volatile("\n->" : : ) diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 03541cb..2967284 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -9,8 +9,6 @@ * Remy Bohmer <linux@bohmer.net> */ - - #define USB_CDC_SUBCLASS_ACM 0x02 #define USB_CDC_SUBCLASS_ETHERNET 0x06 #define USB_CDC_SUBCLASS_WHCM 0x08 @@ -199,7 +197,6 @@ struct usb_cdc_line_coding { #define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3) #define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ - /*-------------------------------------------------------------------------*/ /* @@ -221,4 +218,3 @@ struct usb_cdc_notification { __le16 wIndex; __le16 wLength; } __attribute__ ((packed)); - diff --git a/lib/hashtable.c b/lib/hashtable.c index 57802cf..7ac3ddd 100644 --- a/lib/hashtable.c +++ b/lib/hashtable.c @@ -56,7 +56,7 @@ /* * [Aho,Sethi,Ullman] Compilers: Principles, Techniques and Tools, 1986 - * [Knuth] The Art of Computer Programming, part 3 (6.4) + * [Knuth] The Art of Computer Programming, part 3 (6.4) */ /* @@ -252,7 +252,7 @@ int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval, if (htab->table[idx].used) { /* - * Further action might be required according to the + * Further action might be required according to the * action value. */ unsigned hval2; @@ -283,8 +283,8 @@ int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval, do { /* - * Because SIZE is prime this guarantees to - * step through all available indices. + * Because SIZE is prime this guarantees to + * step through all available indices. */ if (idx <= hval2) idx = htab->size + idx - hval2; @@ -323,8 +323,8 @@ int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval, /* An empty bucket has been found. */ if (action == ENTER) { /* - * If table is full and another entry should be - * entered return with error. + * If table is full and another entry should be + * entered return with error. */ if (htab->filled == htab->size) { __set_errno(ENOMEM); diff --git a/lib/qsort.c b/lib/qsort.c index bb47319..e771dcf 100644 --- a/lib/qsort.c +++ b/lib/qsort.c @@ -23,9 +23,9 @@ #endif void qsort(void *base, - size_t nel, - size_t width, - int (*comp)(const void *, const void *)) + size_t nel, + size_t width, + int (*comp)(const void *, const void *)) { size_t wgap, i, j, k; char tmp; diff --git a/post/board/lwmon5/fpga.c b/post/board/lwmon5/fpga.c index 3067548..501369b 100644 --- a/post/board/lwmon5/fpga.c +++ b/post/board/lwmon5/fpga.c @@ -227,8 +227,6 @@ static int fpga_mem_test(void) return ret; } - - /* Verify FPGA addresslines */ static int fpga_post_addrline(ulong *address, ulong *base, ulong size) { |