diff options
132 files changed, 13132 insertions, 681 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index da8ae35..b37ed0c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -557,11 +557,16 @@ Rowel Atienza <rowel@diwalabs.com> Stefano Babic <sbabic@denx.de> ea20 davinci + mx35pdk i.MX35 + mx51evk i.MX51 polaris xscale trizepsiv xscale - mx51evk i.MX51 vision2 i.MX51 +Jason Liu <r64343@freescale.com> + + mx53evk i.MX53 + Enric Balletbo i Serra <eballetbo@iseebcn.com> igep0020 ARM ARMV7 (OMAP3xx SoC) @@ -677,8 +682,9 @@ Nishant Kamat <nskamat@ti.com> Minkyu Kang <mk7.kang@samsung.com> - s5p_goni ARM ARMV7 (S5PC110 SoC) - SMDKC100 ARM ARMV7 (S5PC100 SoC) + SMDKC100 ARM ARMV7 (S5PC100 SoC) + s5p_goni ARM ARMV7 (S5PC110 SoC) + s5pc210_universal ARM ARMV7 (S5PC210 SoC) Frederik Kriewitz <frederik@kriewitz.eu> @@ -756,6 +762,10 @@ Stelian Pop <stelian.pop@leadtechdesign.com> at91sam9263ek ARM926EJS (AT91SAM9263 SoC) at91sam9rlek ARM926EJS (AT91SAM9RL SoC) +Mike Rapoport <mike@compulab.co.il> + + cm_t35 ARM ARMV7 (OMAP3xx SoC) + Tom Rix <Tom.Rix@windriver.com> omap3_zoom2 ARM ARMV7 (OMAP3xx SoC) @@ -829,6 +839,7 @@ Marek Vasut <marek.vasut@gmail.com> palmtc xscale vpac270 xscale zipitz2 xscale + efikamx i.MX51 Hugo Villeneuve <hugo.villeneuve@lyrtech.com> diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 4e165bf..a6a4742 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -67,5 +67,5 @@ LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds # needed for relocation ifndef CONFIG_NAND_SPL -PLATFORM_LDFLAGS += -pie +LDFLAGS_u-boot += -pie endif diff --git a/arch/arm/cpu/arm1136/mx31/timer.c b/arch/arm/cpu/arm1136/mx31/timer.c index b8848c4..f6be3b9 100644 --- a/arch/arm/cpu/arm1136/mx31/timer.c +++ b/arch/arm/cpu/arm1136/mx31/timer.c @@ -39,8 +39,7 @@ #define GPTCR_CLKSOURCE_32 (4 << 6) /* Clock source */ #define GPTCR_TEN 1 /* Timer enable */ -static ulong timestamp; -static ulong lastinc; +DECLARE_GLOBAL_DATA_PTR; /* "time" is measured in 1 / CONFIG_SYS_HZ seconds, "tick" is internal timer period */ #ifdef CONFIG_MX31_TIMER_HIGH_PRECISION @@ -108,8 +107,8 @@ int timer_init (void) void reset_timer_masked (void) { /* reset time */ - lastinc = GPTCNT; /* capture current incrementer value time */ - timestamp = 0; /* start "advancing" time stamp from 0 */ + gd->lastinc = GPTCNT; /* capture current incrementer value time */ + gd->tbl = 0; /* start "advancing" time stamp from 0 */ } void reset_timer(void) @@ -121,13 +120,13 @@ unsigned long long get_ticks (void) { ulong now = GPTCNT; /* current tick value */ - if (now >= lastinc) /* normal mode (non roll) */ + if (now >= gd->lastinc) /* normal mode (non roll) */ /* move stamp forward with absolut diff ticks */ - timestamp += (now - lastinc); + gd->tbl += (now - gd->lastinc); else /* we have rollover of incrementer */ - timestamp += (0xFFFFFFFF - lastinc) + now; - lastinc = now; - return timestamp; + gd->tbl += (0xFFFFFFFF - gd->lastinc) + now; + gd->lastinc = now; + return gd->tbl; } ulong get_timer_masked (void) @@ -148,7 +147,7 @@ ulong get_timer (ulong base) void set_timer (ulong t) { - timestamp = time_to_tick(t); + gd->tbl = time_to_tick(t); } /* delay x useconds AND preserve advance timestamp value */ diff --git a/arch/arm/cpu/arm1136/mx35/Makefile b/arch/arm/cpu/arm1136/mx35/Makefile new file mode 100644 index 0000000..20f36e3 --- /dev/null +++ b/arch/arm/cpu/arm1136/mx35/Makefile @@ -0,0 +1,63 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008-2009 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS += generic.o +COBJS += timer.o +COBJS += iomux.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +$(OBJS) : $(TOPDIR)/include/asm/arch/asm-offsets.h + + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### + +$(TOPDIR)/include/asm/arch/asm-offsets.h: $(TOPDIR)/include/autoconf.mk.dep \ + ./asm-offsets.s + @echo Generating $@ + $(TOPDIR)/tools/scripts/make-asm-offsets ./asm-offsets.s $@ + +asm-offsets.s: $(TOPDIR)/include/autoconf.mk.dep \ + ./asm-offsets.c + $(CC) -DDO_DEPS_ONLY \ + $(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \ + -o $@ ./asm-offsets.c -c -S diff --git a/arch/arm/cpu/arm1136/mx35/asm-offsets.c b/arch/arm/cpu/arm1136/mx35/asm-offsets.c new file mode 100644 index 0000000..d2678e2 --- /dev/null +++ b/arch/arm/cpu/arm1136/mx35/asm-offsets.c @@ -0,0 +1,43 @@ +/* + * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c + * + * This program is used to generate definitions needed by + * assembly language modules. + * + * We use the technique used in the OSF Mach kernel code: + * generate asm statements containing #defines, + * compile this file to assembler, and then extract the + * #defines from the assembly-language output. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <common.h> +#include <asm/arch/imx-regs.h> + +#include <linux/kbuild.h> + +int main(void) +{ + + /* Round up to make sure size gives nice stack alignment */ + DEFINE(CLKCTL_CCMR, offsetof(struct ccm_regs, ccmr)); + DEFINE(CLKCTL_PDR0, offsetof(struct ccm_regs, pdr0)); + DEFINE(CLKCTL_PDR1, offsetof(struct ccm_regs, pdr1)); + DEFINE(CLKCTL_PDR2, offsetof(struct ccm_regs, pdr2)); + DEFINE(CLKCTL_PDR3, offsetof(struct ccm_regs, pdr3)); + DEFINE(CLKCTL_PDR4, offsetof(struct ccm_regs, pdr4)); + DEFINE(CLKCTL_RCSR, offsetof(struct ccm_regs, rcsr)); + DEFINE(CLKCTL_MPCTL, offsetof(struct ccm_regs, mpctl)); + DEFINE(CLKCTL_PPCTL, offsetof(struct ccm_regs, ppctl)); + DEFINE(CLKCTL_ACMR, offsetof(struct ccm_regs, acmr)); + DEFINE(CLKCTL_COSR, offsetof(struct ccm_regs, cosr)); + DEFINE(CLKCTL_CGR0, offsetof(struct ccm_regs, cgr0)); + DEFINE(CLKCTL_CGR1, offsetof(struct ccm_regs, cgr1)); + DEFINE(CLKCTL_CGR2, offsetof(struct ccm_regs, cgr2)); + + return 0; +} diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c new file mode 100644 index 0000000..1b4ab75 --- /dev/null +++ b/arch/arm/cpu/arm1136/mx35/generic.c @@ -0,0 +1,463 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <netdev.h> + +#define CLK_CODE(arm, ahb, sel) (((arm) << 16) + ((ahb) << 8) + (sel)) +#define CLK_CODE_ARM(c) (((c) >> 16) & 0xFF) +#define CLK_CODE_AHB(c) (((c) >> 8) & 0xFF) +#define CLK_CODE_PATH(c) ((c) & 0xFF) + +#define CCM_GET_DIVIDER(x, m, o) (((x) & (m)) >> (o)) + +#ifdef CONFIG_FSL_ESDHC +DECLARE_GLOBAL_DATA_PTR; +#endif + +static int g_clk_mux_auto[8] = { + CLK_CODE(1, 3, 0), CLK_CODE(1, 2, 1), CLK_CODE(2, 1, 1), -1, + CLK_CODE(1, 6, 0), CLK_CODE(1, 4, 1), CLK_CODE(2, 2, 1), -1, +}; + +static int g_clk_mux_consumer[16] = { + CLK_CODE(1, 4, 0), CLK_CODE(1, 3, 1), CLK_CODE(1, 3, 1), -1, + -1, -1, CLK_CODE(4, 1, 0), CLK_CODE(1, 5, 0), + CLK_CODE(1, 8, 1), CLK_CODE(1, 6, 1), CLK_CODE(2, 4, 0), -1, + -1, -1, CLK_CODE(4, 2, 0), -1, +}; + +static int hsp_div_table[3][16] = { + {4, 3, 2, -1, -1, -1, 1, 5, 4, 3, 2, -1, -1, -1, 1, -1}, + {-1, -1, -1, -1, -1, -1, -1, -1, 8, 6, 4, -1, -1, -1, 2, -1}, + {3, -1, -1, -1, -1, -1, -1, -1, 3, -1, -1, -1, -1, -1, -1, -1}, +}; + +u32 get_cpu_rev(void) +{ + int reg; + struct iim_regs *iim = + (struct iim_regs *)IIM_BASE_ADDR; + reg = readl(&iim->iim_srev); + if (!reg) { + reg = readw(ROMPATCH_REV); + reg <<= 4; + } else { + reg += CHIP_REV_1_0; + } + + return 0x35000 + (reg & 0xFF); +} + +static u32 get_arm_div(u32 pdr0, u32 *fi, u32 *fd) +{ + int *pclk_mux; + if (pdr0 & MXC_CCM_PDR0_AUTO_CON) { + pclk_mux = g_clk_mux_consumer + + ((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >> + MXC_CCM_PDR0_CON_MUX_DIV_OFFSET); + } else { + pclk_mux = g_clk_mux_auto + + ((pdr0 & MXC_CCM_PDR0_AUTO_MUX_DIV_MASK) >> + MXC_CCM_PDR0_AUTO_MUX_DIV_OFFSET); + } + + if ((*pclk_mux) == -1) + return -1; + + if (fi && fd) { + if (!CLK_CODE_PATH(*pclk_mux)) { + *fi = *fd = 1; + return CLK_CODE_ARM(*pclk_mux); + } + if (pdr0 & MXC_CCM_PDR0_AUTO_CON) { + *fi = 3; + *fd = 4; + } else { + *fi = 2; + *fd = 3; + } + } + return CLK_CODE_ARM(*pclk_mux); +} + +static int get_ahb_div(u32 pdr0) +{ + int *pclk_mux; + + pclk_mux = g_clk_mux_consumer + + ((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >> + MXC_CCM_PDR0_CON_MUX_DIV_OFFSET); + + if ((*pclk_mux) == -1) + return -1; + + return CLK_CODE_AHB(*pclk_mux); +} + +static u32 decode_pll(u32 reg, u32 infreq) +{ + u32 mfi = (reg >> 10) & 0xf; + u32 mfn = reg & 0x3f; + u32 mfd = (reg >> 16) & 0x3f; + u32 pd = (reg >> 26) & 0xf; + + mfi = mfi <= 5 ? 5 : mfi; + mfd += 1; + pd += 1; + + return ((2 * (infreq / 1000) * (mfi * mfd + mfn)) / (mfd * pd)) * 1000; +} + +static u32 get_mcu_main_clk(void) +{ + u32 arm_div = 0, fi = 0, fd = 0; + struct ccm_regs *ccm = + (struct ccm_regs *)IMX_CCM_BASE; + arm_div = get_arm_div(readl(&ccm->pdr0), &fi, &fd); + fi *= + decode_pll(readl(&ccm->mpctl), + CONFIG_MX35_HCLK_FREQ); + return fi / (arm_div * fd); +} + +static u32 get_ipg_clk(void) +{ + u32 freq = get_mcu_main_clk(); + struct ccm_regs *ccm = + (struct ccm_regs *)IMX_CCM_BASE; + u32 pdr0 = readl(&ccm->pdr0); + + return freq / (get_ahb_div(pdr0) * 2); +} + +static u32 get_ipg_per_clk(void) +{ + u32 freq = get_mcu_main_clk(); + struct ccm_regs *ccm = + (struct ccm_regs *)IMX_CCM_BASE; + u32 pdr0 = readl(&ccm->pdr0); + u32 pdr4 = readl(&ccm->pdr4); + u32 div; + if (pdr0 & MXC_CCM_PDR0_PER_SEL) { + div = (CCM_GET_DIVIDER(pdr4, + MXC_CCM_PDR4_PER0_PRDF_MASK, + MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1) * + (CCM_GET_DIVIDER(pdr4, + MXC_CCM_PDR4_PER0_PODF_MASK, + MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1); + } else { + div = CCM_GET_DIVIDER(pdr0, + MXC_CCM_PDR0_PER_PODF_MASK, + MXC_CCM_PDR0_PER_PODF_OFFSET) + 1; + freq /= get_ahb_div(pdr0); + } + return freq / div; +} + +u32 imx_get_uartclk(void) +{ + u32 freq; + struct ccm_regs *ccm = + (struct ccm_regs *)IMX_CCM_BASE; + u32 pdr4 = readl(&ccm->pdr4); + + if (readl(&ccm->pdr3) & MXC_CCM_PDR3_UART_M_U) { + freq = get_mcu_main_clk(); + } else { + freq = decode_pll(readl(&ccm->ppctl), + CONFIG_MX35_HCLK_FREQ); + } + freq /= ((CCM_GET_DIVIDER(pdr4, + MXC_CCM_PDR4_UART_PRDF_MASK, + MXC_CCM_PDR4_UART_PRDF_OFFSET) + 1) * + (CCM_GET_DIVIDER(pdr4, + MXC_CCM_PDR4_UART_PODF_MASK, + MXC_CCM_PDR4_UART_PODF_OFFSET) + 1)); + return freq; +} + +unsigned int mxc_get_main_clock(enum mxc_main_clocks clk) +{ + u32 nfc_pdf, hsp_podf; + u32 pll, ret_val = 0, usb_prdf, usb_podf; + struct ccm_regs *ccm = + (struct ccm_regs *)IMX_CCM_BASE; + + u32 reg = readl(&ccm->pdr0); + u32 reg4 = readl(&ccm->pdr4); + + reg |= 0x1; + + switch (clk) { + case CPU_CLK: + ret_val = get_mcu_main_clk(); + break; + case AHB_CLK: + ret_val = get_mcu_main_clk(); + break; + case HSP_CLK: + if (reg & CLKMODE_CONSUMER) { + hsp_podf = (reg >> 20) & 0x3; + pll = get_mcu_main_clk(); + hsp_podf = hsp_div_table[hsp_podf][(reg>>16)&0xF]; + if (hsp_podf > 0) { + ret_val = pll / hsp_podf; + } else { + puts("mismatch HSP with ARM clock setting\n"); + ret_val = 0; + } + } else { + ret_val = get_mcu_main_clk(); + } + break; + case IPG_CLK: + ret_val = get_ipg_clk();; + break; + case IPG_PER_CLK: + ret_val = get_ipg_per_clk(); + break; + case NFC_CLK: + nfc_pdf = (reg4 >> 28) & 0xF; + pll = get_mcu_main_clk(); + /* AHB/nfc_pdf */ + ret_val = pll / (nfc_pdf + 1); + break; + case USB_CLK: + usb_prdf = (reg4 >> 25) & 0x7; + usb_podf = (reg4 >> 22) & 0x7; + if (reg4 & 0x200) { + pll = get_mcu_main_clk(); + } else { + pll = decode_pll(readl(&ccm->ppctl), + CONFIG_MX35_HCLK_FREQ); + } + + ret_val = pll / ((usb_prdf + 1) * (usb_podf + 1)); + break; + default: + printf("Unknown clock: %d\n", clk); + break; + } + + return ret_val; +} +unsigned int mxc_get_peri_clock(enum mxc_peri_clocks clk) +{ + u32 ret_val = 0, pdf, pre_pdf, clk_sel; + struct ccm_regs *ccm = + (struct ccm_regs *)IMX_CCM_BASE; + u32 mpdr2 = readl(&ccm->pdr2); + u32 mpdr3 = readl(&ccm->pdr3); + u32 mpdr4 = readl(&ccm->pdr4); + + switch (clk) { + case UART1_BAUD: + case UART2_BAUD: + case UART3_BAUD: + clk_sel = mpdr3 & (1 << 14); + pre_pdf = (mpdr4 >> 13) & 0x7; + pdf = (mpdr4 >> 10) & 0x7; + ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : + decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) / + ((pre_pdf + 1) * (pdf + 1)); + break; + case SSI1_BAUD: + pre_pdf = (mpdr2 >> 24) & 0x7; + pdf = mpdr2 & 0x3F; + clk_sel = mpdr2 & (1 << 6); + ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : + decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) / + ((pre_pdf + 1) * (pdf + 1)); + break; + case SSI2_BAUD: + pre_pdf = (mpdr2 >> 27) & 0x7; + pdf = (mpdr2 >> 8) & 0x3F; + clk_sel = mpdr2 & (1 << 6); + ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : + decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) / + ((pre_pdf + 1) * (pdf + 1)); + break; + case CSI_BAUD: + clk_sel = mpdr2 & (1 << 7); + pre_pdf = (mpdr2 >> 16) & 0x7; + pdf = (mpdr2 >> 19) & 0x7; + ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : + decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) / + ((pre_pdf + 1) * (pdf + 1)); + break; + case MSHC_CLK: + pre_pdf = readl(&ccm->pdr1); + clk_sel = (pre_pdf & 0x80); + pdf = (pre_pdf >> 22) & 0x3F; + pre_pdf = (pre_pdf >> 28) & 0x7; + ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : + decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) / + ((pre_pdf + 1) * (pdf + 1)); + break; + case ESDHC1_CLK: + clk_sel = mpdr3 & 0x40; + pre_pdf = mpdr3 & 0x7; + pdf = (mpdr3>>3) & 0x7; + ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : + decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) / + ((pre_pdf + 1) * (pdf + 1)); + break; + case ESDHC2_CLK: + clk_sel = mpdr3 & 0x40; + pre_pdf = (mpdr3 >> 8) & 0x7; + pdf = (mpdr3 >> 11) & 0x7; + ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : + decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) / + ((pre_pdf + 1) * (pdf + 1)); + break; + case ESDHC3_CLK: + clk_sel = mpdr3 & 0x40; + pre_pdf = (mpdr3 >> 16) & 0x7; + pdf = (mpdr3 >> 19) & 0x7; + ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : + decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) / + ((pre_pdf + 1) * (pdf + 1)); + break; + case SPDIF_CLK: + clk_sel = mpdr3 & 0x400000; + pre_pdf = (mpdr3 >> 29) & 0x7; + pdf = (mpdr3 >> 23) & 0x3F; + ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : + decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) / + ((pre_pdf + 1) * (pdf + 1)); + break; + default: + printf("%s(): This clock: %d not supported yet\n", + __func__, clk); + break; + } + + return ret_val; +} + +unsigned int mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return get_mcu_main_clk(); + case MXC_AHB_CLK: + break; + case MXC_IPG_CLK: + return get_ipg_clk(); + case MXC_IPG_PERCLK: + return get_ipg_per_clk(); + case MXC_UART_CLK: + return imx_get_uartclk(); + case MXC_ESDHC_CLK: + return mxc_get_peri_clock(ESDHC1_CLK); + case MXC_USB_CLK: + return mxc_get_main_clock(USB_CLK); + case MXC_FEC_CLK: + return get_ipg_clk(); + case MXC_CSPI_CLK: + return get_ipg_clk(); + } + return -1; +} + +#ifdef CONFIG_FEC_MXC +/* + * The MX35 has no fuse for MAC, return a NULL MAC + */ +void imx_get_mac_from_fuse(unsigned char *mac) +{ + memset(mac, 0, 6); +} + +u32 imx_get_fecclk(void) +{ + return mxc_get_clock(MXC_IPG_CLK); +} +#endif + +int do_mx35_showclocks(cmd_tbl_t *cmdtp, + int flag, int argc, char * const argv[]) +{ + u32 cpufreq = get_mcu_main_clk(); + printf("mx35 cpu clock: %dMHz\n", cpufreq / 1000000); + printf("ipg clock : %dHz\n", get_ipg_clk()); + printf("ipg per clock : %dHz\n", get_ipg_per_clk()); + printf("uart clock : %dHz\n", mxc_get_clock(MXC_UART_CLK)); + + return 0; +} + +U_BOOT_CMD( + clockinfo, CONFIG_SYS_MAXARGS, 1, do_mx35_showclocks, + "display clocks\n", + "" +); + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + printf("CPU: Freescale i.MX35 at %d MHz\n", + get_mcu_main_clk() / 1000000); + /* mxc_dump_clocks(); */ + return 0; +} +#endif + +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ + +int cpu_eth_init(bd_t *bis) +{ + int rc = -ENODEV; + +#if defined(CONFIG_FEC_MXC) + rc = fecmxc_initialize(bis); +#endif + + return rc; +} + +int get_clocks(void) +{ +#ifdef CONFIG_FSL_ESDHC + gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); +#endif + return 0; +} + +void reset_cpu(ulong addr) +{ + struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR; + writew(4, &wdog->wcr); +} diff --git a/arch/arm/cpu/arm1136/mx35/iomux.c b/arch/arm/cpu/arm1136/mx35/iomux.c new file mode 100644 index 0000000..f93191d --- /dev/null +++ b/arch/arm/cpu/arm1136/mx35/iomux.c @@ -0,0 +1,116 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/mx35_pins.h> +#include <asm/arch/iomux.h> + +/* + * IOMUX register (base) addresses + */ +enum iomux_reg_addr { + IOMUXGPR = IOMUXC_BASE_ADDR, /* General purpose */ + IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR + 4, /* MUX control */ + IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + 0x324, /* last MUX control */ + IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + 0x328, /* Pad control */ + IOMUXSW_PAD_END = IOMUXC_BASE_ADDR + 0x794, /* last Pad control */ + IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR + 0x7AC, /* input select */ + IOMUXSW_INPUT_END = IOMUXC_BASE_ADDR + 0x9F4, /* last input select */ +}; + +#define MUX_PIN_NUM_MAX \ + (((IOMUXSW_PAD_END - IOMUXSW_PAD_CTL) >> 2) + 1) +#define MUX_INPUT_NUM_MUX \ + (((IOMUXSW_INPUT_END - IOMUXSW_INPUT_CTL) >> 2) + 1) + +#define PIN_TO_IOMUX_INDEX(pin) ((PIN_TO_IOMUX_PAD(pin) - 0x328) >> 2) + +/* + * Request ownership for an IO pin. This function has to be the first one + * being called before that pin is used. + */ +void mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) +{ + u32 mux_reg = PIN_TO_IOMUX_MUX(pin); + + if (mux_reg != NON_MUX_I) { + mux_reg += IOMUXGPR; + writel(cfg, mux_reg); + } +} + +/* + * Release ownership for an IO pin + */ +void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) +{ +} + +/* + * This function configures the pad value for a IOMUX pin. + * + * @param pin a pin number as defined in iomux_pin_name_t + * @param config the ORed value of elements defined in iomux_pad_config_t + */ +void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config) +{ + u32 pad_reg = IOMUXGPR + PIN_TO_IOMUX_PAD(pin); + + writel(config, pad_reg); +} + +/* + * This function enables/disables the general purpose function for a particular + * signal. + * + * @param gp one signal as defined in iomux_gp_func_t + * @param en enable/disable + */ +void mxc_iomux_set_gpr(iomux_gp_func_t gp, int en) +{ + u32 l; + + l = readl(IOMUXGPR); + if (en) + l |= gp; + else + l &= ~gp; + + writel(l, IOMUXGPR); +} + +/* + * This function configures input path. + * + * @param input index of input select register as defined in + * iomux_input_select_t + * @param config the binary value of elements defined in + * iomux_input_config_t + */ +void mxc_iomux_set_input(iomux_input_select_t input, u32 config) +{ + u32 reg = IOMUXSW_INPUT_CTL + (input << 2); + + writel(config, reg); +} diff --git a/arch/arm/cpu/arm1136/mx35/timer.c b/arch/arm/cpu/arm1136/mx35/timer.c new file mode 100644 index 0000000..db1e2c9 --- /dev/null +++ b/arch/arm/cpu/arm1136/mx35/timer.c @@ -0,0 +1,120 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2008-2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> + +/* General purpose timers bitfields */ +#define GPTCR_SWR (1<<15) /* Software reset */ +#define GPTCR_FRR (1<<9) /* Freerun / restart */ +#define GPTCR_CLKSOURCE_32 (0x100<<6) /* Clock source */ +#define GPTCR_CLKSOURCE_IPG (0x001<<6) /* Clock source */ +#define GPTCR_TEN (1) /* Timer enable */ +#define GPTPR_VAL (66) + +int timer_init(void) +{ + int i; + struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR; + + /* setup GP Timer 1 */ + writel(GPTCR_SWR, &gpt->ctrl); + for (i = 0; i < 100; i++) + writel(0, &gpt->ctrl); /* We have no udelay by now */ + + writel(GPTPR_VAL, &gpt->pre); + /* Freerun Mode, PERCLK1 input */ + writel(readl(&gpt->ctrl) | + GPTCR_CLKSOURCE_IPG | GPTCR_TEN, + &gpt->ctrl); + + return 0; +} + +void reset_timer_masked(void) +{ + struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR; + + writel(0, &gpt->ctrl); + /* Freerun Mode, PERCLK1 input */ + writel(GPTCR_CLKSOURCE_IPG | GPTCR_TEN, + &gpt->ctrl); +} + +inline ulong get_timer_masked(void) +{ + + struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR; + ulong val = readl(&gpt->counter); + + return val; +} + +void reset_timer(void) +{ + reset_timer_masked(); +} + +ulong get_timer(ulong base) +{ + ulong tmp; + + tmp = get_timer_masked(); + + if (tmp <= (base * 1000)) { + /* Overflow */ + tmp += (0xffffffff - base); + } + + return (tmp / 1000) - base; +} + +void set_timer(ulong t) +{ +} + +/* + * delay x useconds AND preserve advance timstamp value + * GPTCNT is now supposed to tick 1 by 1 us. + */ +void __udelay(unsigned long usec) +{ + ulong tmp; + + tmp = get_timer_masked(); /* get current timestamp */ + + /* if setting this forward will roll time stamp */ + if ((usec + tmp + 1) < tmp) { + /* reset "advancing" timestamp to 0, set lastinc value */ + reset_timer_masked(); + } else { + /* else, set advancing stamp wake up time */ + tmp += usec; + } + + while (get_timer_masked() < tmp) /* loop till event */ + /*NOP*/; +} diff --git a/arch/arm/cpu/arm1136/omap24xx/timer.c b/arch/arm/cpu/arm1136/omap24xx/timer.c index 68fe1b2..228ceba 100644 --- a/arch/arm/cpu/arm1136/omap24xx/timer.c +++ b/arch/arm/cpu/arm1136/omap24xx/timer.c @@ -39,8 +39,7 @@ /* macro to read the 32 bit timer */ #define READ_TIMER (*((volatile ulong *)(CONFIG_SYS_TIMERBASE+TCRR))) -static ulong timestamp; -static ulong lastinc; +DECLARE_GLOBAL_DATA_PTR; int timer_init (void) { @@ -70,7 +69,7 @@ ulong get_timer (ulong base) void set_timer (ulong t) { - timestamp = t; + gd->tbl = t; } /* delay x useconds AND preserve advance timestamp value */ @@ -99,20 +98,20 @@ void __udelay (unsigned long usec) void reset_timer_masked (void) { /* reset time */ - lastinc = READ_TIMER; /* capture current incrementer value time */ - timestamp = 0; /* start "advancing" time stamp from 0 */ + gd->lastinc = READ_TIMER; /* capture current incrementer value time */ + gd->tbl = 0; /* start "advancing" time stamp from 0 */ } ulong get_timer_masked (void) { ulong now = READ_TIMER; /* current tick value */ - if (now >= lastinc) /* normal mode (non roll) */ - timestamp += (now - lastinc); /* move stamp fordward with absoulte diff ticks */ + if (now >= gd->lastinc) /* normal mode (non roll) */ + gd->tbl += (now - gd->lastinc); /* move stamp fordward with absoulte diff ticks */ else /* we have rollover of incrementer */ - timestamp += (0xFFFFFFFF - lastinc) + now; - lastinc = now; - return timestamp; + gd->tbl += (0xFFFFFFFF - gd->lastinc) + now; + gd->lastinc = now; + return gd->tbl; } /* waits specified delay value and resets timestamp */ diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 9a6f6cb..b771d31 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -196,7 +196,6 @@ stack_setup: cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -251,7 +250,6 @@ clear_bss: #ifndef CONFIG_PRELOADER ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 237dcfe..363329a 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -250,7 +250,6 @@ stack_setup: cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -343,7 +342,6 @@ clear_bss: #ifndef CONFIG_PRELOADER ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index abfa124..c098118 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -165,7 +165,6 @@ stack_setup: cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -220,7 +219,6 @@ clear_bss: #ifndef CONFIG_PRELOADER ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 08f178d..2fc0abc 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -119,9 +119,6 @@ start_code: orr r0, r0, #0xd3 msr cpsr, r0 - bl coloured_LED_init - bl red_LED_on - #if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) /* * relocate exception table @@ -211,7 +208,6 @@ stack_setup: cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -266,7 +262,6 @@ clear_bss: #ifndef CONFIG_PRELOADER ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index 2c0c869..20ecdd5 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -202,7 +202,6 @@ stack_setup: cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -257,7 +256,6 @@ clear_bss: #ifndef CONFIG_PRELOADER ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile index 4eb1d87..3183e6a 100644 --- a/arch/arm/cpu/arm926ejs/davinci/Makefile +++ b/arch/arm/cpu/arm926ejs/davinci/Makefile @@ -32,7 +32,7 @@ COBJS-$(CONFIG_SOC_DM355) += dm355.o COBJS-$(CONFIG_SOC_DM365) += dm365.o COBJS-$(CONFIG_SOC_DM644X) += dm644x.o COBJS-$(CONFIG_SOC_DM646X) += dm646x.o -COBJS-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o +COBJS-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o et1011c.o SOBJS = reset.o diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/cpu/arm926ejs/davinci/cpu.c index fc3551c..8b57205 100644 --- a/arch/arm/cpu/arm926ejs/davinci/cpu.c +++ b/arch/arm/cpu/arm926ejs/davinci/cpu.c @@ -54,9 +54,9 @@ #define DDR_PLLDIV PLLC_PLLDIV2 #endif -#ifdef CONFIG_SOC_DM6447 -#define ARM_PLLDIV PLLC_PLLDIV2 +#ifdef CONFIG_SOC_DM646X #define DSP_PLLDIV PLLC_PLLDIV1 +#define ARM_PLLDIV PLLC_PLLDIV2 #define DDR_PLLDIV PLLC_PLLDIV1 #endif @@ -145,7 +145,11 @@ static inline unsigned pll_postdiv(volatile void *pllbase) static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div) { volatile void *pllbase = (volatile void *) pll_addr; +#ifdef CONFIG_SOC_DM646X + unsigned base = CFG_REFCLK_FREQ / 1000; +#else unsigned base = CONFIG_SYS_HZ_CLOCK / 1000; +#endif /* the PLL might be bypassed */ if (REG(pllbase + PLLC_PLLCTL) & BIT(0)) { @@ -176,6 +180,12 @@ int print_cpuinfo(void) return 0; } +#ifdef DAVINCI_DM6467EVM +unsigned int davinci_arm_clk_get() +{ + return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV) * 1000000; +} +#endif #endif /* diff --git a/arch/arm/cpu/arm926ejs/davinci/et1011c.c b/arch/arm/cpu/arm926ejs/davinci/et1011c.c new file mode 100644 index 0000000..da07345 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/davinci/et1011c.c @@ -0,0 +1,55 @@ +/* + * LSI ET1011C PHY Driver for TI DaVinci(TMS320DM6467) board. + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <net.h> +#include <miiphy.h> +#include <asm/arch/emac_defs.h> + +#ifdef CONFIG_DRIVER_TI_EMAC + +#ifdef CONFIG_CMD_NET + +/* LSI PHYSICAL LAYER TRANSCEIVER ET1011C */ + +#define MII_PHY_CONFIG_REG 22 + +/* PHY Config bits */ +#define PHY_SYS_CLK_EN (1 << 4) + +int et1011c_get_link_speed(int phy_addr) +{ + u_int16_t data; + + if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &data) && (data & 0x04)) { + davinci_eth_phy_read(EMAC_MDIO_PHY_NUM, + MII_PHY_CONFIG_REG, &data); + /* Enable 125MHz clock sourced from PHY */ + davinci_eth_phy_write(EMAC_MDIO_PHY_NUM, + MII_PHY_CONFIG_REG, + data | PHY_SYS_CLK_EN); + return (1); + } + return (0); +} + +#endif /* CONFIG_CMD_NET */ + +#endif /* CONFIG_DRIVER_ETHER */ diff --git a/arch/arm/cpu/arm926ejs/kirkwood/timer.c b/arch/arm/cpu/arm926ejs/kirkwood/timer.c index 2ec6a93..3e80329 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/timer.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/timer.c @@ -83,8 +83,10 @@ struct kwtmr_registers *kwtmr_regs = (struct kwtmr_registers *)KW_TIMER_BASE; #define READ_TIMER (readl(CNTMR_VAL_REG(UBOOT_CNTR)) / \ (CONFIG_SYS_TCLK / 1000)) -static ulong timestamp; -static ulong lastdec; +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp gd->tbl +#define lastdec gd->lastinc void reset_timer_masked(void) { diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/timer.c b/arch/arm/cpu/arm926ejs/mb86r0x/timer.c index 9175b71..6966b0d 100644 --- a/arch/arm/cpu/arm926ejs/mb86r0x/timer.c +++ b/arch/arm/cpu/arm926ejs/mb86r0x/timer.c @@ -33,8 +33,10 @@ #define TIMER_LOAD_VAL 0xffffffff #define TIMER_FREQ (CONFIG_MB86R0x_IOCLK / 256) -static unsigned long long timestamp; -static ulong lastdec; +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp gd->tbl +#define lastdec gd->lastinc static inline unsigned long long tick_to_time(unsigned long long tick) { diff --git a/arch/arm/cpu/arm926ejs/mx25/timer.c b/arch/arm/cpu/arm926ejs/mx25/timer.c index 11d41a8..14f0c2d 100644 --- a/arch/arm/cpu/arm926ejs/mx25/timer.c +++ b/arch/arm/cpu/arm926ejs/mx25/timer.c @@ -41,8 +41,10 @@ #include <asm/io.h> #include <asm/arch/imx-regs.h> -static ulong timestamp; -static ulong lastinc; +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp gd->tbl +#define lastinc gd->lastinc /* * "time" is measured in 1 / CONFIG_SYS_HZ seconds, diff --git a/arch/arm/cpu/arm926ejs/mx27/timer.c b/arch/arm/cpu/arm926ejs/mx27/timer.c index 8f1d47b..5c1cf01 100644 --- a/arch/arm/cpu/arm926ejs/mx27/timer.c +++ b/arch/arm/cpu/arm926ejs/mx27/timer.c @@ -43,8 +43,10 @@ #define GPTCR_CLKSOURCE_32 (4 << 1) /* Clock source */ #define GPTCR_TEN 1 /* Timer enable */ -static ulong timestamp; -static ulong lastinc; +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp gd->tbl +#define lastinc gd->lastinc /* * "time" is measured in 1 / CONFIG_SYS_HZ seconds, diff --git a/arch/arm/cpu/arm926ejs/omap/timer.c b/arch/arm/cpu/arm926ejs/omap/timer.c index 7d4b6e6..88a0ee6 100644 --- a/arch/arm/cpu/arm926ejs/omap/timer.c +++ b/arch/arm/cpu/arm926ejs/omap/timer.c @@ -42,8 +42,10 @@ /* macro to read the 32 bit timer */ #define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+8)) -static ulong timestamp; -static ulong lastdec; +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp gd->tbl +#define lastdec gd->lastinc int timer_init (void) { diff --git a/arch/arm/cpu/arm926ejs/orion5x/timer.c b/arch/arm/cpu/arm926ejs/orion5x/timer.c index 089ef47..bbab226 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/timer.c +++ b/arch/arm/cpu/arm926ejs/orion5x/timer.c @@ -90,8 +90,10 @@ static inline ulong read_timer(void) / (CONFIG_SYS_TCLK / 1000); } -static ulong timestamp; -static ulong lastdec; +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp gd->tbl +#define lastdec gd->lastinc void reset_timer_masked(void) { diff --git a/arch/arm/cpu/arm926ejs/spear/timer.c b/arch/arm/cpu/arm926ejs/spear/timer.c index 06858b4..66cf4de 100644 --- a/arch/arm/cpu/arm926ejs/spear/timer.c +++ b/arch/arm/cpu/arm926ejs/spear/timer.c @@ -36,8 +36,10 @@ static struct gpt_regs *const gpt_regs_p = static struct misc_regs *const misc_regs_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE; -static ulong timestamp; -static ulong lastdec; +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp gd->tbl +#define lastdec gd->lastinc int timer_init(void) { diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 5519252..eb93ac9 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -201,7 +201,6 @@ stack_setup: cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -256,7 +255,6 @@ clear_bss: #ifndef CONFIG_PRELOADER ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/cpu/arm926ejs/versatile/timer.c b/arch/arm/cpu/arm926ejs/versatile/timer.c index 81d6749..2e243b1 100644 --- a/arch/arm/cpu/arm926ejs/versatile/timer.c +++ b/arch/arm/cpu/arm926ejs/versatile/timer.c @@ -42,8 +42,10 @@ /* macro to read the 32 bit timer */ #define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4)) -static ulong timestamp; -static ulong lastdec; +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp gd->tbl +#define lastdec gd->lastinc #define TIMER_ENABLE (1 << 7) #define TIMER_MODE_MSK (1 << 6) diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index f9c9470..296effc 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -173,7 +173,6 @@ stack_setup: cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -228,7 +227,6 @@ clear_bss: #ifndef CONFIG_PRELOADER ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index d28e745..e8518e2 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -169,7 +169,6 @@ stack_setup: cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -224,7 +223,6 @@ clear_bss: #ifndef CONFIG_PRELOADER ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/cpu/armv7/mx5/iomux.c b/arch/arm/cpu/armv7/mx5/iomux.c index e8928d5..d4e3bbb 100644 --- a/arch/arm/cpu/armv7/mx5/iomux.c +++ b/arch/arm/cpu/armv7/mx5/iomux.c @@ -34,7 +34,7 @@ enum iomux_reg_addr { IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR, IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + MUX_I_END, IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + PAD_I_START, - IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR, + IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR + INPUT_CTL_START, }; #define MUX_PIN_NUM_MAX (((MUX_I_END - MUX_I_START) >> 2) + 1) @@ -44,11 +44,12 @@ static inline u32 get_mux_reg(iomux_pin_name_t pin) { u32 mux_reg = PIN_TO_IOMUX_MUX(pin); +#if defined(CONFIG_MX51) if (is_soc_rev(CHIP_REV_2_0) < 0) { /* * Fixup register address: - * i.MX51 TO1 has offset with the register - * which is define as TO2. + * i.MX51 TO1 has offset with the register + * which is define as TO2. */ if ((pin == MX51_PIN_NANDF_RB5) || (pin == MX51_PIN_NANDF_RB6) || @@ -59,6 +60,7 @@ static inline u32 get_mux_reg(iomux_pin_name_t pin) else if (mux_reg >= 0x130) mux_reg += 0xC; } +#endif mux_reg += IOMUXSW_MUX_CTL; return mux_reg; } @@ -68,11 +70,12 @@ static inline u32 get_pad_reg(iomux_pin_name_t pin) { u32 pad_reg = PIN_TO_IOMUX_PAD(pin); +#if defined(CONFIG_MX51) if (is_soc_rev(CHIP_REV_2_0) < 0) { /* * Fixup register address: - * i.MX51 TO1 has offset with the register - * which is define as TO2. + * i.MX51 TO1 has offset with the register + * which is define as TO2. */ if ((pin == MX51_PIN_NANDF_RB5) || (pin == MX51_PIN_NANDF_RB6) || @@ -91,6 +94,7 @@ static inline u32 get_pad_reg(iomux_pin_name_t pin) else pad_reg += 8; } +#endif pad_reg += IOMUXSW_PAD_CTL; return pad_reg; } @@ -98,10 +102,13 @@ static inline u32 get_pad_reg(iomux_pin_name_t pin) /* Get the last iomux register address */ static inline u32 get_mux_end(void) { +#if defined(CONFIG_MX51) if (is_soc_rev(CHIP_REV_2_0) < 0) return IOMUXC_BASE_ADDR + (0x3F8 - 4); else return IOMUXC_BASE_ADDR + (0x3F0 - 4); +#endif + return IOMUXSW_MUX_END; } /* @@ -164,3 +171,16 @@ unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin) u32 pad_reg = get_pad_reg(pin); return readl(pad_reg); } + +/* + * This function configures daisy-chain + * + * @param input index of input select register + * @param config the binary value of elements + */ +void mxc_iomux_set_input(iomux_input_select_t input, u32 config) +{ + u32 reg = IOMUXSW_INPUT_CTL + (input << 2); + + writel(config, reg); +} diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index e984870..96ebfe2 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -70,6 +70,7 @@ /* M4IF setup */ .macro init_m4if +#ifdef CONFIG_MX51 /* VPU and IPU given higher priority (0x4) * IPU accesses with ID=0x1 given highest priority (=0xA) */ @@ -87,27 +88,31 @@ ldr r1, =0x001901A3 str r1, [r0, #0x48] +#endif .endm /* init_m4if */ .macro setup_pll pll, freq - ldr r2, =\pll + ldr r0, =\pll ldr r1, =0x00001232 - str r1, [r2, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */ + str r1, [r0, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */ mov r1, #0x2 - str r1, [r2, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */ + str r1, [r0, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */ - str r3, [r2, #PLL_DP_OP] - str r3, [r2, #PLL_DP_HFS_OP] + ldr r1, W_DP_OP_\freq + str r1, [r0, #PLL_DP_OP] + str r1, [r0, #PLL_DP_HFS_OP] - str r4, [r2, #PLL_DP_MFD] - str r4, [r2, #PLL_DP_HFS_MFD] + ldr r1, W_DP_MFD_\freq + str r1, [r0, #PLL_DP_MFD] + str r1, [r0, #PLL_DP_HFS_MFD] - str r5, [r2, #PLL_DP_MFN] - str r5, [r2, #PLL_DP_HFS_MFN] + ldr r1, W_DP_MFN_\freq + str r1, [r0, #PLL_DP_MFN] + str r1, [r0, #PLL_DP_HFS_MFN] ldr r1, =0x00001232 - str r1, [r2, #PLL_DP_CTL] -1: ldr r1, [r2, #PLL_DP_CTL] + str r1, [r0, #PLL_DP_CTL] +1: ldr r1, [r0, #PLL_DP_CTL] ands r1, r1, #0x1 beq 1b .endm @@ -115,6 +120,7 @@ .macro init_clock ldr r0, =CCM_BASE_ADDR +#if defined(CONFIG_MX51) /* Gate of clocks to the peripherals first */ ldr r1, =0x3FFFFFFF str r1, [r0, #CLKCTL_CCGR0] @@ -141,19 +147,16 @@ 1: ldr r1, [r0, #CLKCTL_CDHIPR] cmp r1, #0x0 bne 1b +#endif /* Switch ARM to step clock */ mov r1, #0x4 str r1, [r0, #CLKCTL_CCSR] - mov r3, #DP_OP_800 - mov r4, #DP_MFD_800 - mov r5, #DP_MFN_800 - setup_pll PLL1_BASE_ADDR - mov r3, #DP_OP_665 - mov r4, #DP_MFD_665 - mov r5, #DP_MFN_665 - setup_pll PLL3_BASE_ADDR + setup_pll PLL1_BASE_ADDR, 800 + +#if defined(CONFIG_MX51) + setup_pll PLL3_BASE_ADDR, 665 /* Switch peripheral to PLL 3 */ ldr r0, =CCM_BASE_ADDR @@ -162,10 +165,7 @@ str r1, [r0, #CLKCTL_CBCMR] ldr r1, =0x13239145 str r1, [r0, #CLKCTL_CBCDR] - mov r3, #DP_OP_665 - mov r4, #DP_MFD_665 - mov r5, #DP_MFN_665 - setup_pll PLL2_BASE_ADDR + setup_pll PLL2_BASE_ADDR, 665 /* Switch peripheral to PLL2 */ ldr r0, =CCM_BASE_ADDR @@ -174,12 +174,8 @@ ldr r1, =0x000020C0 orr r1,r1,#CONFIG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] - - mov r3, #DP_OP_216 - mov r4, #DP_MFD_216 - mov r5, #DP_MFN_216 - setup_pll PLL3_BASE_ADDR - +#endif + setup_pll PLL3_BASE_ADDR, 216 /* Set the platform clock dividers */ ldr r0, =ARM_BASE_ADDR @@ -188,18 +184,23 @@ ldr r0, =CCM_BASE_ADDR +#if defined(CONFIG_MX51) /* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */ ldr r1, =0x0 ldr r3, [r1, #ROM_SI_REV] cmp r3, #0x10 movls r1, #0x1 movhi r1, #0 - str r1, [r0, #CLKCTL_CACRR] +#else + mov r1, #0 +#endif + str r1, [r0, #CLKCTL_CACRR] /* Switch ARM back to PLL 1 */ mov r1, #0 str r1, [r0, #CLKCTL_CCSR] +#if defined(CONFIG_MX51) /* setup the rest */ /* Use lp_apm (24MHz) source for perclk */ ldr r1, =0x000020C2 @@ -208,6 +209,7 @@ /* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */ ldr r1, =CONFIG_SYS_CLKTL_CBCDR str r1, [r0, #CLKCTL_CBCDR] +#endif /* Restore the default values in the Gate registers */ ldr r1, =0xFFFFFFFF @@ -218,13 +220,23 @@ str r1, [r0, #CLKCTL_CCGR4] str r1, [r0, #CLKCTL_CCGR5] str r1, [r0, #CLKCTL_CCGR6] +#if defined(CONFIG_MX53) + str r1, [r0, #CLKCTL_CCGR7] +#endif +#if defined(CONFIG_MX51) /* Use PLL 2 for UART's, get 66.5MHz from it */ ldr r1, =0xA5A2A020 str r1, [r0, #CLKCTL_CSCMR1] ldr r1, =0x00C30321 str r1, [r0, #CLKCTL_CSCDR1] - +#elif defined(CONFIG_MX53) + ldr r1, [r0, #CLKCTL_CSCDR1] + orr r1, r1, #0x3f + eor r1, r1, #0x3f + orr r1, r1, #0x21 + str r1, [r0, #CLKCTL_CSCDR1] +#endif /* make sure divider effective */ 1: ldr r1, [r0, #CLKCTL_CDHIPR] cmp r1, #0x0 @@ -249,6 +261,7 @@ .globl lowlevel_init lowlevel_init: +#if defined(CONFIG_MX51) ldr r0, =GPIO1_BASE_ADDR ldr r1, [r0, #0x0] orr r1, r1, #(1 << 23) @@ -256,6 +269,7 @@ lowlevel_init: ldr r1, [r0, #0x4] orr r1, r1, #(1 << 23) str r1, [r0, #0x4] +#endif init_l2cc @@ -269,9 +283,12 @@ lowlevel_init: mov pc,lr /* Board level setting value */ -DDR_PERCHARGE_CMD: .word 0x04008008 -DDR_REFRESH_CMD: .word 0x00008010 -DDR_LMR1_W: .word 0x00338018 -DDR_LMR_CMD: .word 0xB2220000 -DDR_TIMING_W: .word 0xB02567A9 -DDR_MISC_W: .word 0x000A0104 +W_DP_OP_800: .word DP_OP_800 +W_DP_MFD_800: .word DP_MFD_800 +W_DP_MFN_800: .word DP_MFN_800 +W_DP_OP_665: .word DP_OP_665 +W_DP_MFD_665: .word DP_MFD_665 +W_DP_MFN_665: .word DP_MFN_665 +W_DP_OP_216: .word DP_OP_216 +W_DP_MFD_216: .word DP_MFD_216 +W_DP_MFN_216: .word DP_MFN_216 diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c index 2900119..09500b3 100644 --- a/arch/arm/cpu/armv7/mx5/soc.c +++ b/arch/arm/cpu/armv7/mx5/soc.c @@ -33,17 +33,20 @@ #include <fsl_esdhc.h> #endif -#if defined(CONFIG_MX51) -#define CPU_TYPE 0x51000 -#else +#if !(defined(CONFIG_MX51) || defined(CONFIG_MX53)) #error "CPU_TYPE not defined" #endif u32 get_cpu_rev(void) { - int system_rev = CPU_TYPE; +#ifdef CONFIG_MX51 + int system_rev = 0x51000; +#else + int system_rev = 0x53000; +#endif int reg = __raw_readl(ROM_SI_REV); +#if defined(CONFIG_MX51) switch (reg) { case 0x02: system_rev |= CHIP_REV_1_1; @@ -57,11 +60,20 @@ u32 get_cpu_rev(void) case 0x20: system_rev |= CHIP_REV_3_0; break; - return system_rev; default: system_rev |= CHIP_REV_1_0; break; } +#else + switch (reg) { + case 0x20: + system_rev |= CHIP_REV_2_0; + break; + default: + system_rev |= CHIP_REV_1_0; + break; + } +#endif return system_rev; } diff --git a/arch/arm/cpu/armv7/mx5/timer.c b/arch/arm/cpu/armv7/mx5/timer.c index 3044fcf..1972f64 100644 --- a/arch/arm/cpu/armv7/mx5/timer.c +++ b/arch/arm/cpu/armv7/mx5/timer.c @@ -44,8 +44,10 @@ static struct mxc_gpt *cur_gpt = (struct mxc_gpt *)GPT1_BASE_ADDR; #define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */ #define GPTCR_TEN (1) /* Timer enable */ -static ulong timestamp; -static ulong lastinc; +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp (gd->tbl) +#define lastinc (gd->lastinc) int timer_init(void) { diff --git a/arch/arm/cpu/armv7/s5p-common/cpu_info.c b/arch/arm/cpu/armv7/s5p-common/cpu_info.c index 2f6c708..c8a543a 100644 --- a/arch/arm/cpu/armv7/s5p-common/cpu_info.c +++ b/arch/arm/cpu/armv7/s5p-common/cpu_info.c @@ -32,8 +32,6 @@ int arch_cpu_init(void) { s5p_set_cpu_id(); - s5p_clock_init(); - return 0; } #endif diff --git a/arch/arm/cpu/armv7/s5pc1xx/clock.c b/arch/arm/cpu/armv7/s5pc1xx/clock.c index 98a27e5..e92647c 100644 --- a/arch/arm/cpu/armv7/s5pc1xx/clock.c +++ b/arch/arm/cpu/armv7/s5pc1xx/clock.c @@ -38,11 +38,6 @@ #define CONFIG_SYS_CLK_FREQ_C110 24000000 #endif -unsigned long (*get_uart_clk)(int dev_index); -unsigned long (*get_pwm_clk)(void); -unsigned long (*get_arm_clk)(void); -unsigned long (*get_pll_clk)(int); - /* s5pc110: return pll clock frequency */ static unsigned long s5pc100_get_pll_clk(int pllreg) { @@ -316,15 +311,28 @@ static unsigned long s5pc1xx_get_pwm_clk(void) return s5pc100_get_pclk(); } -void s5p_clock_init(void) +unsigned long get_pll_clk(int pllreg) { - if (cpu_is_s5pc110()) { - get_pll_clk = s5pc110_get_pll_clk; - get_arm_clk = s5pc110_get_arm_clk; - } else { - get_pll_clk = s5pc100_get_pll_clk; - get_arm_clk = s5pc100_get_arm_clk; - } - get_uart_clk = s5pc1xx_get_uart_clk; - get_pwm_clk = s5pc1xx_get_pwm_clk; + if (cpu_is_s5pc110()) + return s5pc110_get_pll_clk(pllreg); + else + return s5pc100_get_pll_clk(pllreg); +} + +unsigned long get_arm_clk(void) +{ + if (cpu_is_s5pc110()) + return s5pc110_get_arm_clk(); + else + return s5pc100_get_arm_clk(); +} + +unsigned long get_pwm_clk(void) +{ + return s5pc1xx_get_pwm_clk(); +} + +unsigned long get_uart_clk(int dev_index) +{ + return s5pc1xx_get_uart_clk(dev_index); } diff --git a/arch/arm/cpu/armv7/s5pc2xx/Makefile b/arch/arm/cpu/armv7/s5pc2xx/Makefile new file mode 100644 index 0000000..124c380 --- /dev/null +++ b/arch/arm/cpu/armv7/s5pc2xx/Makefile @@ -0,0 +1,42 @@ +# +# Copyright (C) 2009 Samsung Electronics +# Minkyu Kang <mk7.kang@samsung.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS += clock.o soc.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/s5pc2xx/clock.c b/arch/arm/cpu/armv7/s5pc2xx/clock.c new file mode 100644 index 0000000..450a630 --- /dev/null +++ b/arch/arm/cpu/armv7/s5pc2xx/clock.c @@ -0,0 +1,220 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/clk.h> + +#ifndef CONFIG_SYS_CLK_FREQ_C210 +#define CONFIG_SYS_CLK_FREQ_C210 24000000 +#endif + +/* s5pc210: return pll clock frequency */ +static unsigned long s5pc210_get_pll_clk(int pllreg) +{ + struct s5pc210_clock *clk = + (struct s5pc210_clock *)samsung_get_base_clock(); + unsigned long r, m, p, s, k = 0, mask, fout; + unsigned int freq; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con0); + break; + case MPLL: + r = readl(&clk->mpll_con0); + break; + case EPLL: + r = readl(&clk->epll_con0); + k = readl(&clk->epll_con1); + break; + case VPLL: + r = readl(&clk->vpll_con0); + k = readl(&clk->vpll_con1); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + /* + * APLL_CON: MIDV [25:16] + * MPLL_CON: MIDV [25:16] + * EPLL_CON: MIDV [24:16] + * VPLL_CON: MIDV [24:16] + */ + if (pllreg == APLL || pllreg == MPLL) + mask = 0x3ff; + else + mask = 0x1ff; + + m = (r >> 16) & mask; + + /* PDIV [13:8] */ + p = (r >> 8) & 0x3f; + /* SDIV [2:0] */ + s = r & 0x7; + + freq = CONFIG_SYS_CLK_FREQ_C210; + + if (pllreg == EPLL) { + k = k & 0xffff; + /* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */ + fout = (m + k / 65536) * (freq / (p * (1 << s))); + } else if (pllreg == VPLL) { + k = k & 0xfff; + /* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */ + fout = (m + k / 1024) * (freq / (p * (1 << s))); + } else { + if (s < 1) + s = 1; + /* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */ + fout = m * (freq / (p * (1 << (s - 1)))); + } + + return fout; +} + +/* s5pc210: return ARM clock frequency */ +static unsigned long s5pc210_get_arm_clk(void) +{ + struct s5pc210_clock *clk = + (struct s5pc210_clock *)samsung_get_base_clock(); + unsigned long div; + unsigned long dout_apll; + unsigned int apll_ratio; + + div = readl(&clk->div_cpu0); + + /* APLL_RATIO: [26:24] */ + apll_ratio = (div >> 24) & 0x7; + + dout_apll = get_pll_clk(APLL) / (apll_ratio + 1); + + return dout_apll; +} + +/* s5pc210: return pwm clock frequency */ +static unsigned long s5pc210_get_pwm_clk(void) +{ + struct s5pc210_clock *clk = + (struct s5pc210_clock *)samsung_get_base_clock(); + unsigned long pclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_PERIL0 + * PWM_SEL [27:24] + */ + sel = readl(&clk->src_peril0); + sel = (sel >> 24) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + /* + * CLK_DIV_PERIL3 + * PWM_RATIO [3:0] + */ + ratio = readl(&clk->div_peril3); + ratio = ratio & 0xf; + + pclk = sclk / (ratio + 1); + + return pclk; +} + +/* s5pc210: return uart clock frequency */ +static unsigned long s5pc210_get_uart_clk(int dev_index) +{ + struct s5pc210_clock *clk = + (struct s5pc210_clock *)samsung_get_base_clock(); + unsigned long uclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_PERIL0 + * UART0_SEL [3:0] + * UART1_SEL [7:4] + * UART2_SEL [8:11] + * UART3_SEL [12:15] + * UART4_SEL [16:19] + * UART5_SEL [23:20] + */ + sel = readl(&clk->src_peril0); + sel = (sel >> (dev_index << 2)) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + /* + * CLK_DIV_PERIL0 + * UART0_RATIO [3:0] + * UART1_RATIO [7:4] + * UART2_RATIO [8:11] + * UART3_RATIO [12:15] + * UART4_RATIO [16:19] + * UART5_RATIO [23:20] + */ + ratio = readl(&clk->div_peril0); + ratio = (ratio >> (dev_index << 2)) & 0xf; + + uclk = sclk / (ratio + 1); + + return uclk; +} + +unsigned long get_pll_clk(int pllreg) +{ + return s5pc210_get_pll_clk(pllreg); +} + +unsigned long get_arm_clk(void) +{ + return s5pc210_get_arm_clk(); +} + +unsigned long get_pwm_clk(void) +{ + return s5pc210_get_pwm_clk(); +} + +unsigned long get_uart_clk(int dev_index) +{ + return s5pc210_get_uart_clk(dev_index); +} diff --git a/arch/arm/cpu/armv7/s5pc2xx/soc.c b/arch/arm/cpu/armv7/s5pc2xx/soc.c new file mode 100644 index 0000000..dcfcec2 --- /dev/null +++ b/arch/arm/cpu/armv7/s5pc2xx/soc.c @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2010 Samsung Electronics. + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> + +void reset_cpu(ulong addr) +{ + writel(0x1, samsung_get_base_swreset()); +} diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 684f2d2..cb4f92f 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -171,7 +171,6 @@ stack_setup: beq clear_bss /* skip relocation */ #endif mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -224,7 +223,6 @@ fixnext: clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index 9f8c15b..f71a398 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -295,7 +295,6 @@ stack_setup: cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -350,7 +349,6 @@ clear_bss: #ifndef CONFIG_PRELOADER ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S index 32dfe8b..1457427 100644 --- a/arch/arm/cpu/lh7a40x/start.S +++ b/arch/arm/cpu/lh7a40x/start.S @@ -182,7 +182,6 @@ stack_setup: cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -237,7 +236,6 @@ clear_bss: #ifndef CONFIG_PRELOADER ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index fbd0def..d2d391e 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -247,7 +247,6 @@ stack_setup: cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -304,7 +303,6 @@ clear_bss: #ifndef CONFIG_PRELOADER ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index 9379af6..9c9c3b3 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -154,7 +154,6 @@ stack_setup: cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -209,7 +208,6 @@ clear_bss: #ifndef CONFIG_PRELOADER ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 7c2db4f..815d704 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -158,7 +158,6 @@ stack_setup: cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -213,7 +212,6 @@ clear_bss: #ifndef CONFIG_PRELOADER ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs - ldr r3, _TEXT_BASE /* Text base */ mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 diff --git a/arch/arm/include/asm/arch-davinci/emac_defs.h b/arch/arm/include/asm/arch-davinci/emac_defs.h index 76493a1..4a4ee04 100644 --- a/arch/arm/include/asm/arch-davinci/emac_defs.h +++ b/arch/arm/include/asm/arch-davinci/emac_defs.h @@ -389,4 +389,7 @@ int dp83848_get_link_speed(int phy_addr); int dp83848_init_phy(int phy_addr); int dp83848_auto_negotiate(int phy_addr); +#define PHY_ET1011C (0x282f013) +int et1011c_get_link_speed(int phy_addr); + #endif /* _DM644X_EMAC_H_ */ diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index b95fa97..df3f549 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -209,6 +209,7 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_DM646X_LPSC_EMAC 14 #define DAVINCI_DM646X_LPSC_UART0 26 #define DAVINCI_DM646X_LPSC_I2C 31 +#define DAVINCI_DM646X_LPSC_TIMER0 34 #else /* CONFIG_SOC_DA8XX */ diff --git a/arch/arm/include/asm/arch-davinci/sdmmc_defs.h b/arch/arm/include/asm/arch-davinci/sdmmc_defs.h new file mode 100644 index 0000000..853fd40 --- /dev/null +++ b/arch/arm/include/asm/arch-davinci/sdmmc_defs.h @@ -0,0 +1,175 @@ +/* + * Davinci MMC Controller Defines - Based on Linux davinci_mmc.c + * + * Copyright (C) 2010 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SDMMC_DEFS_H_ +#define _SDMMC_DEFS_H_ + +#include <asm/arch/hardware.h> + +/* MMC Control Reg fields */ +#define MMCCTL_DATRST (1 << 0) +#define MMCCTL_CMDRST (1 << 1) +#define MMCCTL_WIDTH_4_BIT (1 << 2) +#define MMCCTL_DATEG_DISABLED (0 << 6) +#define MMCCTL_DATEG_RISING (1 << 6) +#define MMCCTL_DATEG_FALLING (2 << 6) +#define MMCCTL_DATEG_BOTH (3 << 6) +#define MMCCTL_PERMDR_LE (0 << 9) +#define MMCCTL_PERMDR_BE (1 << 9) +#define MMCCTL_PERMDX_LE (0 << 10) +#define MMCCTL_PERMDX_BE (1 << 10) + +/* MMC Clock Control Reg fields */ +#define MMCCLK_CLKEN (1 << 8) +#define MMCCLK_CLKRT_MASK (0xFF << 0) + +/* MMC Status Reg0 fields */ +#define MMCST0_DATDNE (1 << 0) +#define MMCST0_BSYDNE (1 << 1) +#define MMCST0_RSPDNE (1 << 2) +#define MMCST0_TOUTRD (1 << 3) +#define MMCST0_TOUTRS (1 << 4) +#define MMCST0_CRCWR (1 << 5) +#define MMCST0_CRCRD (1 << 6) +#define MMCST0_CRCRS (1 << 7) +#define MMCST0_DXRDY (1 << 9) +#define MMCST0_DRRDY (1 << 10) +#define MMCST0_DATED (1 << 11) +#define MMCST0_TRNDNE (1 << 12) + +#define MMCST0_ERR_MASK (0x00F8) + +/* MMC Status Reg1 fields */ +#define MMCST1_BUSY (1 << 0) +#define MMCST1_CLKSTP (1 << 1) +#define MMCST1_DXEMP (1 << 2) +#define MMCST1_DRFUL (1 << 3) +#define MMCST1_DAT3ST (1 << 4) +#define MMCST1_FIFOEMP (1 << 5) +#define MMCST1_FIFOFUL (1 << 6) + +/* MMC INT Mask Reg fields */ +#define MMCIM_EDATDNE (1 << 0) +#define MMCIM_EBSYDNE (1 << 1) +#define MMCIM_ERSPDNE (1 << 2) +#define MMCIM_ETOUTRD (1 << 3) +#define MMCIM_ETOUTRS (1 << 4) +#define MMCIM_ECRCWR (1 << 5) +#define MMCIM_ECRCRD (1 << 6) +#define MMCIM_ECRCRS (1 << 7) +#define MMCIM_EDXRDY (1 << 9) +#define MMCIM_EDRRDY (1 << 10) +#define MMCIM_EDATED (1 << 11) +#define MMCIM_ETRNDNE (1 << 12) + +#define MMCIM_MASKALL (0xFFFFFFFF) + +/* MMC Resp Tout Reg fields */ +#define MMCTOR_TOR_MASK (0xFF) /* dont write to reg, | it */ +#define MMCTOR_TOD_20_16_SHIFT (8) + +/* MMC Data Read Tout Reg fields */ +#define MMCTOD_TOD_0_15_MASK (0xFFFF) + +/* MMC Block len Reg fields */ +#define MMCBLEN_BLEN_MASK (0xFFF) + +/* MMC Num Blocks Reg fields */ +#define MMCNBLK_NBLK_MASK (0xFFFF) +#define MMCNBLK_NBLK_MAX (0xFFFF) + +/* MMC Num Blocks Counter Reg fields */ +#define MMCNBLC_NBLC_MASK (0xFFFF) + +/* MMC Cmd Reg fields */ +#define MMCCMD_CMD_MASK (0x3F) +#define MMCCMD_PPLEN (1 << 7) +#define MMCCMD_BSYEXP (1 << 8) +#define MMCCMD_RSPFMT_NONE (0 << 9) +#define MMCCMD_RSPFMT_R1567 (1 << 9) +#define MMCCMD_RSPFMT_R2 (2 << 9) +#define MMCCMD_RSPFMT_R3 (3 << 9) +#define MMCCMD_DTRW (1 << 11) +#define MMCCMD_STRMTP (1 << 12) +#define MMCCMD_WDATX (1 << 13) +#define MMCCMD_INITCK (1 << 14) +#define MMCCMD_DCLR (1 << 15) +#define MMCCMD_DMATRIG (1 << 16) + +/* FIFO control Reg fields */ +#define MMCFIFOCTL_FIFORST (1 << 0) +#define MMCFIFOCTL_FIFODIR (1 << 1) +#define MMCFIFOCTL_FIFOLEV (1 << 2) +#define MMCFIFOCTL_ACCWD_4 (0 << 3) /* access width of 4 bytes */ +#define MMCFIFOCTL_ACCWD_3 (1 << 3) /* access width of 3 bytes */ +#define MMCFIFOCTL_ACCWD_2 (2 << 3) /* access width of 2 bytes */ +#define MMCFIFOCTL_ACCWD_1 (3 << 3) /* access width of 1 byte */ + +/* Davinci MMC Register definitions */ +struct davinci_mmc_regs { + dv_reg mmcctl; + dv_reg mmcclk; + dv_reg mmcst0; + dv_reg mmcst1; + dv_reg mmcim; + dv_reg mmctor; + dv_reg mmctod; + dv_reg mmcblen; + dv_reg mmcnblk; + dv_reg mmcnblc; + dv_reg mmcdrr; + dv_reg mmcdxr; + dv_reg mmccmd; + dv_reg mmcarghl; + dv_reg mmcrsp01; + dv_reg mmcrsp23; + dv_reg mmcrsp45; + dv_reg mmcrsp67; + dv_reg mmcdrsp; + dv_reg mmcetok; + dv_reg mmccidx; + dv_reg mmcckc; + dv_reg mmctorc; + dv_reg mmctodc; + dv_reg mmcblnc; + dv_reg sdioctl; + dv_reg sdiost0; + dv_reg sdioien; + dv_reg sdioist; + dv_reg mmcfifoctl; +}; + +/* Davinci MMC board definitions */ +struct davinci_mmc { + struct davinci_mmc_regs *reg_base; /* Register base address */ + uint input_clk; /* Input clock to MMC controller */ + uint host_caps; /* Host capabilities */ + uint voltages; /* Host supported voltages */ + uint version; /* MMC Controller version */ +}; + +enum { + MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */ + MMC_CTLR_VERSION_2, /* DA830 */ +}; + +int davinci_mmc_init(bd_t *bis, struct davinci_mmc *host); + +#endif /* _SDMMC_DEFS_H */ diff --git a/arch/arm/include/asm/arch-mx31/mx31-regs.h b/arch/arm/include/asm/arch-mx31/mx31-regs.h index 46ed47c..105f7d8 100644 --- a/arch/arm/include/asm/arch-mx31/mx31-regs.h +++ b/arch/arm/include/asm/arch-mx31/mx31-regs.h @@ -64,6 +64,17 @@ struct gpio_regs { u32 gpio_psr; }; +struct cspi_regs { + u32 rxdata; + u32 txdata; + u32 ctrl; + u32 intr; + u32 dma; + u32 stat; + u32 period; + u32 test; +}; + #define IOMUX_PADNUM_MASK 0x1ff #define IOMUX_PIN(gpionum, padnum) ((padnum) & IOMUX_PADNUM_MASK) diff --git a/arch/arm/include/asm/arch-mx35/clock.h b/arch/arm/include/asm/arch-mx35/clock.h new file mode 100644 index 0000000..4c0ddfd --- /dev/null +++ b/arch/arm/include/asm/arch-mx35/clock.h @@ -0,0 +1,45 @@ +/* + * (C) Copyright 2011 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H + +enum mxc_clock { + MXC_ARM_CLK = 0, + MXC_AHB_CLK, + MXC_IPG_CLK, + MXC_IPG_PERCLK, + MXC_UART_CLK, + MXC_ESDHC_CLK, + MXC_USB_CLK, + MXC_CSPI_CLK, + MXC_FEC_CLK, +}; + +unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref); + +u32 imx_get_uartclk(void); +u32 imx_get_fecclk(void); +unsigned int mxc_get_clock(enum mxc_clock clk); + +#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-mx35/crm_regs.h b/arch/arm/include/asm/arch-mx35/crm_regs.h new file mode 100644 index 0000000..e903cf1 --- /dev/null +++ b/arch/arm/include/asm/arch-mx35/crm_regs.h @@ -0,0 +1,270 @@ +/* + * Copyright 2004-2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CPU_ARM1136_MX35_CRM_REGS_H__ +#define __CPU_ARM1136_MX35_CRM_REGS_H__ + +/* Register bit definitions */ +#define MXC_CCM_CCMR_WFI (1 << 30) +#define MXC_CCM_CCMR_STBY_EXIT_SRC (1 << 29) +#define MXC_CCM_CCMR_VSTBY (1 << 28) +#define MXC_CCM_CCMR_WBEN (1 << 27) +#define MXC_CCM_CCMR_VOL_RDY_CNT_OFFSET 20 +#define MXC_CCM_CCMR_VOL_RDY_CNT_MASK (0xF << 20) +#define MXC_CCM_CCMR_ROMW_OFFSET 18 +#define MXC_CCM_CCMR_ROMW_MASK (0x3 << 18) +#define MXC_CCM_CCMR_RAMW_OFFSET 21 +#define MXC_CCM_CCMR_RAMW_MASK (0x3 << 21) +#define MXC_CCM_CCMR_LPM_OFFSET 14 +#define MXC_CCM_CCMR_LPM_MASK (0x3 << 14) +#define MXC_CCM_CCMR_UPE (1 << 9) +#define MXC_CCM_CCMR_MPE (1 << 3) + +#define MXC_CCM_PDR0_PER_SEL (1 << 26) +#define MXC_CCM_PDR0_IPU_HND_BYP (1 << 23) +#define MXC_CCM_PDR0_HSP_PODF_OFFSET 20 +#define MXC_CCM_PDR0_HSP_PODF_MASK (0x3 << 20) +#define MXC_CCM_PDR0_CON_MUX_DIV_OFFSET 16 +#define MXC_CCM_PDR0_CON_MUX_DIV_MASK (0xF << 16) +#define MXC_CCM_PDR0_CKIL_SEL (1 << 15) +#define MXC_CCM_PDR0_PER_PODF_OFFSET 12 +#define MXC_CCM_PDR0_PER_PODF_MASK (0xF << 12) +#define MXC_CCM_PDR0_AUTO_MUX_DIV_OFFSET 9 +#define MXC_CCM_PDR0_AUTO_MUX_DIV_MASK (0x7 << 9) +#define MXC_CCM_PDR0_AUTO_CON 0x1 + +#define MXC_CCM_PDR1_MSHC_PRDF_OFFSET 28 +#define MXC_CCM_PDR1_MSHC_PRDF_MASK (0x7 << 28) +#define MXC_CCM_PDR1_MSHC_PODF_OFFSET 22 +#define MXC_CCM_PDR1_MSHC_PODF_MASK (0x3F << 22) +#define MXC_CCM_PDR1_MSHC_M_U (1 << 7) + +#define MXC_CCM_PDR2_SSI2_PRDF_OFFSET 27 +#define MXC_CCM_PDR2_SSI2_PRDF_MASK (0x7 << 27) +#define MXC_CCM_PDR2_SSI1_PRDF_OFFSET 24 +#define MXC_CCM_PDR2_SSI1_PRDF_MASK (0x7 << 24) +#define MXC_CCM_PDR2_CSI_PRDF_OFFSET 19 +#define MXC_CCM_PDR2_CSI_PRDF_MASK (0x7 << 19) +#define MXC_CCM_PDR2_CSI_PODF_OFFSET 16 +#define MXC_CCM_PDR2_CSI_PODF_MASK (0x7 << 16) +#define MXC_CCM_PDR2_SSI2_PODF_OFFSET 8 +#define MXC_CCM_PDR2_SSI2_PODF_MASK (0x3F << 8) +#define MXC_CCM_PDR2_CSI_M_U (1 << 7) +#define MXC_CCM_PDR2_SSI_M_U (1 << 6) +#define MXC_CCM_PDR2_SSI1_PODF_OFFSET 0 +#define MXC_CCM_PDR2_SSI1_PODF_MASK (0x3F) + +#define MXC_CCM_PDR3_SPDIF_PRDF_OFFSET 29 +#define MXC_CCM_PDR3_SPDIF_PRDF_MASK (0x7 << 29) +#define MXC_CCM_PDR3_SPDIF_PODF_OFFSET 23 +#define MXC_CCM_PDR3_SPDIF_PODF_MASK (0x3F << 23) +#define MXC_CCM_PDR3_SPDIF_M_U (1 << 22) +#define MXC_CCM_PDR3_ESDHC3_PRDF_OFFSET 19 +#define MXC_CCM_PDR3_ESDHC3_PRDF_MASK (0x7 << 19) +#define MXC_CCM_PDR3_ESDHC3_PODF_OFFSET 16 +#define MXC_CCM_PDR3_ESDHC3_PODF_MASK (0x7 << 16) +#define MXC_CCM_PDR3_UART_M_U (1 << 15) +#define MXC_CCM_PDR3_ESDHC2_PRDF_OFFSET 11 +#define MXC_CCM_PDR3_ESDHC2_PRDF_MASK (0x7 << 11) +#define MXC_CCM_PDR3_ESDHC2_PODF_OFFSET 8 +#define MXC_CCM_PDR3_ESDHC2_PODF_MASK (0x7 << 8) +#define MXC_CCM_PDR3_ESDHC_M_U (1 << 6) +#define MXC_CCM_PDR3_ESDHC1_PRDF_OFFSET 3 +#define MXC_CCM_PDR3_ESDHC1_PRDF_MASK (0x7 << 3) +#define MXC_CCM_PDR3_ESDHC1_PODF_OFFSET 0 +#define MXC_CCM_PDR3_ESDHC1_PODF_MASK (0x7) + +#define MXC_CCM_PDR4_NFC_PODF_OFFSET 28 +#define MXC_CCM_PDR4_NFC_PODF_MASK (0xF << 28) +#define MXC_CCM_PDR4_USB_PRDF_OFFSET 25 +#define MXC_CCM_PDR4_USB_PRDF_MASK (0x7 << 25) +#define MXC_CCM_PDR4_USB_PODF_OFFSET 22 +#define MXC_CCM_PDR4_USB_PODF_MASK (0x7 << 22) +#define MXC_CCM_PDR4_PER0_PRDF_OFFSET 19 +#define MXC_CCM_PDR4_PER0_PRDF_MASK (0x7 << 19) +#define MXC_CCM_PDR4_PER0_PODF_OFFSET 16 +#define MXC_CCM_PDR4_PER0_PODF_MASK (0x7 << 16) +#define MXC_CCM_PDR4_UART_PRDF_OFFSET 13 +#define MXC_CCM_PDR4_UART_PRDF_MASK (0x7 << 13) +#define MXC_CCM_PDR4_UART_PODF_OFFSET 10 +#define MXC_CCM_PDR4_UART_PODF_MASK (0x7 << 10) +#define MXC_CCM_PDR4_USB_M_U (1 << 9) + +/* Bit definitions for RCSR */ +#define MXC_CCM_RCSR_BUS_WIDTH (1 << 29) +#define MXC_CCM_RCSR_BUS_16BIT (1 << 29) +#define MXC_CCM_RCSR_PAGE_SIZE (3 << 27) +#define MXC_CCM_RCSR_PAGE_512 (0 << 27) +#define MXC_CCM_RCSR_PAGE_2K (1 << 27) +#define MXC_CCM_RCSR_PAGE_4K1 (2 << 27) +#define MXC_CCM_RCSR_PAGE_4K2 (3 << 27) +#define MXC_CCM_RCSR_SOFT_RESET (1 << 15) +#define MXC_CCM_RCSR_NF16B (1 << 14) +#define MXC_CCM_RCSR_NFC_4K (1 << 9) +#define MXC_CCM_RCSR_NFC_FMS (1 << 8) + +/* Bit definitions for both MCU, PERIPHERAL PLL control registers */ +#define MXC_CCM_PCTL_BRM 0x80000000 +#define MXC_CCM_PCTL_PD_OFFSET 26 +#define MXC_CCM_PCTL_PD_MASK (0xF << 26) +#define MXC_CCM_PCTL_MFD_OFFSET 16 +#define MXC_CCM_PCTL_MFD_MASK (0x3FF << 16) +#define MXC_CCM_PCTL_MFI_OFFSET 10 +#define MXC_CCM_PCTL_MFI_MASK (0xF << 10) +#define MXC_CCM_PCTL_MFN_OFFSET 0 +#define MXC_CCM_PCTL_MFN_MASK 0x3FF + +/* Bit definitions for Audio clock mux register*/ +#define MXC_CCM_ACMR_ESAI_CLK_SEL_OFFSET 12 +#define MXC_CCM_ACMR_ESAI_CLK_SEL_MASK (0xF << 12) +#define MXC_CCM_ACMR_SPDIF_CLK_SEL_OFFSET 8 +#define MXC_CCM_ACMR_SPDIF_CLK_SEL_MASK (0xF << 8) +#define MXC_CCM_ACMR_SSI1_CLK_SEL_OFFSET 4 +#define MXC_CCM_ACMR_SSI1_CLK_SEL_MASK (0xF << 4) +#define MXC_CCM_ACMR_SSI2_CLK_SEL_OFFSET 0 +#define MXC_CCM_ACMR_SSI2_CLK_SEL_MASK (0xF << 0) + +/* Bit definitions for Clock gating Register*/ +#define MXC_CCM_CGR0_ASRC_OFFSET 0 +#define MXC_CCM_CGR0_ASRC_MASK (0x3 << 0) +#define MXC_CCM_CGR0_ATA_OFFSET 2 +#define MXC_CCM_CGR0_ATA_MASK (0x3 << 2) +#define MXC_CCM_CGR0_CAN1_OFFSET 6 +#define MXC_CCM_CGR0_CAN1_MASK (0x3 << 6) +#define MXC_CCM_CGR0_CAN2_OFFSET 8 +#define MXC_CCM_CGR0_CAN2_MASK (0x3 << 8) +#define MXC_CCM_CGR0_CSPI1_OFFSET 10 +#define MXC_CCM_CGR0_CSPI1_MASK (0x3 << 10) +#define MXC_CCM_CGR0_CSPI2_OFFSET 12 +#define MXC_CCM_CGR0_CSPI2_MASK (0x3 << 12) +#define MXC_CCM_CGR0_ECT_OFFSET 14 +#define MXC_CCM_CGR0_ECT_MASK (0x3 << 14) +#define MXC_CCM_CGR0_EDI0_OFFSET 16 +#define MXC_CCM_CGR0_EDI0_MASK (0x3 << 16) +#define MXC_CCM_CGR0_EMI_OFFSET 18 +#define MXC_CCM_CGR0_EMI_MASK (0x3 << 18) +#define MXC_CCM_CGR0_EPIT1_OFFSET 20 +#define MXC_CCM_CGR0_EPIT1_MASK (0x3 << 20) +#define MXC_CCM_CGR0_EPIT2_OFFSET 22 +#define MXC_CCM_CGR0_EPIT2_MASK (0x3 << 22) +#define MXC_CCM_CGR0_ESAI_OFFSET 24 +#define MXC_CCM_CGR0_ESAI_MASK (0x3 << 24) +#define MXC_CCM_CGR0_ESDHC1_OFFSET 26 +#define MXC_CCM_CGR0_ESDHC1_MASK (0x3 << 26) +#define MXC_CCM_CGR0_ESDHC2_OFFSET 28 +#define MXC_CCM_CGR0_ESDHC2_MASK (0x3 << 28) +#define MXC_CCM_CGR0_ESDHC3_OFFSET 30 +#define MXC_CCM_CGR0_ESDHC3_MASK (0x3 << 30) + +#define MXC_CCM_CGR1_FEC_OFFSET 0 +#define MXC_CCM_CGR1_FEC_MASK (0x3 << 0) +#define MXC_CCM_CGR1_GPIO1_OFFSET 2 +#define MXC_CCM_CGR1_GPIO1_MASK (0x3 << 2) +#define MXC_CCM_CGR1_GPIO2_OFFSET 4 +#define MXC_CCM_CGR1_GPIO2_MASK (0x3 << 4) +#define MXC_CCM_CGR1_GPIO3_OFFSET 6 +#define MXC_CCM_CGR1_GPIO3_MASK (0x3 << 6) +#define MXC_CCM_CGR1_GPT_OFFSET 8 +#define MXC_CCM_CGR1_GPT_MASK (0x3 << 8) +#define MXC_CCM_CGR1_I2C1_OFFSET 10 +#define MXC_CCM_CGR1_I2C1_MASK (0x3 << 10) +#define MXC_CCM_CGR1_I2C2_OFFSET 12 +#define MXC_CCM_CGR1_I2C2_MASK (0x3 << 12) +#define MXC_CCM_CGR1_I2C3_OFFSET 14 +#define MXC_CCM_CGR1_I2C3_MASK (0x3 << 14) +#define MXC_CCM_CGR1_IOMUXC_OFFSET 16 +#define MXC_CCM_CGR1_IOMUXC_MASK (0x3 << 16) +#define MXC_CCM_CGR1_IPU_OFFSET 18 +#define MXC_CCM_CGR1_IPU_MASK (0x3 << 18) +#define MXC_CCM_CGR1_KPP_OFFSET 20 +#define MXC_CCM_CGR1_KPP_MASK (0x3 << 20) +#define MXC_CCM_CGR1_MLB_OFFSET 22 +#define MXC_CCM_CGR1_MLB_MASK (0x3 << 22) +#define MXC_CCM_CGR1_MSHC_OFFSET 24 +#define MXC_CCM_CGR1_MSHC_MASK (0x3 << 24) +#define MXC_CCM_CGR1_OWIRE_OFFSET 26 +#define MXC_CCM_CGR1_OWIRE_MASK (0x3 << 26) +#define MXC_CCM_CGR1_PWM_OFFSET 28 +#define MXC_CCM_CGR1_PWM_MASK (0x3 << 28) +#define MXC_CCM_CGR1_RNGC_OFFSET 30 +#define MXC_CCM_CGR1_RNGC_MASK (0x3 << 30) + +#define MXC_CCM_CGR2_RTC_OFFSET 0 +#define MXC_CCM_CGR2_RTC_MASK (0x3 << 0) +#define MXC_CCM_CGR2_RTIC_OFFSET 2 +#define MXC_CCM_CGR2_RTIC_MASK (0x3 << 2) +#define MXC_CCM_CGR2_SCC_OFFSET 4 +#define MXC_CCM_CGR2_SCC_MASK (0x3 << 4) +#define MXC_CCM_CGR2_SDMA_OFFSET 6 +#define MXC_CCM_CGR2_SDMA_MASK (0x3 << 6) +#define MXC_CCM_CGR2_SPBA_OFFSET 8 +#define MXC_CCM_CGR2_SPBA_MASK (0x3 << 8) +#define MXC_CCM_CGR2_SPDIF_OFFSET 10 +#define MXC_CCM_CGR2_SPDIF_MASK (0x3 << 10) +#define MXC_CCM_CGR2_SSI1_OFFSET 12 +#define MXC_CCM_CGR2_SSI1_MASK (0x3 << 12) +#define MXC_CCM_CGR2_SSI2_OFFSET 14 +#define MXC_CCM_CGR2_SSI2_MASK (0x3 << 14) +#define MXC_CCM_CGR2_UART1_OFFSET 16 +#define MXC_CCM_CGR2_UART1_MASK (0x3 << 16) +#define MXC_CCM_CGR2_UART2_OFFSET 18 +#define MXC_CCM_CGR2_UART2_MASK (0x3 << 18) +#define MXC_CCM_CGR2_UART3_OFFSET 20 +#define MXC_CCM_CGR2_UART3_MASK (0x3 << 20) +#define MXC_CCM_CGR2_USBOTG_OFFSET 22 +#define MXC_CCM_CGR2_USBOTG_MASK (0x3 << 22) +#define MXC_CCM_CGR2_WDOG_OFFSET 24 +#define MXC_CCM_CGR2_WDOG_MASK (0x3 << 24) +#define MXC_CCM_CGR2_MAX_OFFSET 26 +#define MXC_CCM_CGR2_MAX_MASK (0x3 << 26) +#define MXC_CCM_CGR2_MAX_ENABLE (0x2 << 26) +#define MXC_CCM_CGR2_AUDMUX_OFFSET 30 +#define MXC_CCM_CGR2_AUDMUX_MASK (0x3 << 30) + +#define MXC_CCM_CGR3_CSI_OFFSET 0 +#define MXC_CCM_CGR3_CSI_MASK (0x3 << 0) +#define MXC_CCM_CGR3_IIM_OFFSET 2 +#define MXC_CCM_CGR3_IIM_MASK (0x3 << 2) +#define MXC_CCM_CGR3_GPU2D_OFFSET 4 +#define MXC_CCM_CGR3_GPU2D_MASK (0x3 << 4) + +#define MXC_CCM_COSR_CLKOSEL_MASK 0x1F +#define MXC_CCM_COSR_CLKOSEL_OFFSET 0 +#define MXC_CCM_COSR_CLKOEN (1 << 5) +#define MXC_CCM_COSR_CLKOUTDIV_1 (1 << 6) +#define MXC_CCM_COSR_CLKOUT_PREDIV_MASK (0x7 << 10) +#define MXC_CCM_COSR_CLKOUT_PREDIV_OFFSET 10 +#define MXC_CCM_COSR_CLKOUT_PRODIV_MASK (0x7 << 13) +#define MXC_CCM_COSR_CLKOUT_PRODIV_OFFSET 13 +#define MXC_CCM_COSR_SSI1_RX_SRC_SEL_MASK (0x3 << 16) +#define MXC_CCM_COSR_SSI1_RX_SRC_SEL_OFFSET 16 +#define MXC_CCM_COSR_SSI1_TX_SRC_SEL_MASK (0x3 << 18) +#define MXC_CCM_COSR_SSI1_TX_SRC_SEL_OFFSET 18 +#define MXC_CCM_COSR_SSI2_RX_SRC_SEL_MASK (0x3 << 20) +#define MXC_CCM_COSR_SSI2_RX_SRC_SEL_OFFSET 20 +#define MXC_CCM_COSR_SSI2_TX_SRC_SEL_MASK (0x3 << 22) +#define MXC_CCM_COSR_SSI2_TX_SRC_SEL_OFFSET 22 +#define MXC_CCM_COSR_ASRC_AUDIO_EN (1 << 24) +#define MXC_CCM_COSR_ASRC_AUDIO_PODF_MASK (0x3F << 26) +#define MXC_CCM_COSR_ASRC_AUDIO_PODF_OFFSET 26 + +#endif diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h new file mode 100644 index 0000000..e741fb0 --- /dev/null +++ b/arch/arm/include/asm/arch-mx35/imx-regs.h @@ -0,0 +1,303 @@ +/* + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * (C) Copyright 2008-2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MX35_H +#define __ASM_ARCH_MX35_H + +/* + * IRAM + */ +#define IRAM_BASE_ADDR 0x10000000 /* internal ram */ +#define IRAM_SIZE 0x00020000 /* 128 KB */ + +/* + * AIPS 1 + */ +#define AIPS1_BASE_ADDR 0x43F00000 +#define AIPS1_CTRL_BASE_ADDR AIPS1_BASE_ADDR +#define MAX_BASE_ADDR 0x43F04000 +#define EVTMON_BASE_ADDR 0x43F08000 +#define CLKCTL_BASE_ADDR 0x43F0C000 +#define I2C_BASE_ADDR 0x43F80000 +#define I2C3_BASE_ADDR 0x43F84000 +#define ATA_BASE_ADDR 0x43F8C000 +#define UART1_BASE_ADDR 0x43F90000 +#define UART2_BASE_ADDR 0x43F94000 +#define I2C2_BASE_ADDR 0x43F98000 +#define CSPI1_BASE_ADDR 0x43FA4000 +#define IOMUXC_BASE_ADDR 0x43FAC000 + +/* + * SPBA + */ +#define SPBA_BASE_ADDR 0x50000000 +#define UART3_BASE_ADDR 0x5000C000 +#define CSPI2_BASE_ADDR 0x50010000 +#define ATA_DMA_BASE_ADDR 0x50020000 +#define FEC_BASE_ADDR 0x50038000 +#define SPBA_CTRL_BASE_ADDR 0x5003C000 + +/* + * AIPS 2 + */ +#define AIPS2_BASE_ADDR 0x53F00000 +#define AIPS2_CTRL_BASE_ADDR AIPS2_BASE_ADDR +#define CCM_BASE_ADDR 0x53F80000 +#define GPT1_BASE_ADDR 0x53F90000 +#define EPIT1_BASE_ADDR 0x53F94000 +#define EPIT2_BASE_ADDR 0x53F98000 +#define GPIO3_BASE_ADDR 0x53FA4000 +#define MMC_SDHC1_BASE_ADDR 0x53FB4000 +#define MMC_SDHC2_BASE_ADDR 0x53FB8000 +#define MMC_SDHC3_BASE_ADDR 0x53FBC000 +#define IPU_CTRL_BASE_ADDR 0x53FC0000 +#define GPIO3_BASE_ADDR 0x53FA4000 +#define GPIO1_BASE_ADDR 0x53FCC000 +#define GPIO2_BASE_ADDR 0x53FD0000 +#define SDMA_BASE_ADDR 0x53FD4000 +#define RTC_BASE_ADDR 0x53FD8000 +#define WDOG_BASE_ADDR 0x53FDC000 +#define PWM_BASE_ADDR 0x53FE0000 +#define RTIC_BASE_ADDR 0x53FEC000 +#define IIM_BASE_ADDR 0x53FF0000 + +#define IMX_CCM_BASE CCM_BASE_ADDR + +/* + * ROMPATCH and AVIC + */ +#define ROMPATCH_BASE_ADDR 0x60000000 +#define AVIC_BASE_ADDR 0x68000000 + +/* + * NAND, SDRAM, WEIM, M3IF, EMI controllers + */ +#define EXT_MEM_CTRL_BASE 0xB8000000 +#define ESDCTL_BASE_ADDR 0xB8001000 +#define WEIM_BASE_ADDR 0xB8002000 +#define WEIM_CTRL_CS0 WEIM_BASE_ADDR +#define WEIM_CTRL_CS1 (WEIM_BASE_ADDR + 0x10) +#define WEIM_CTRL_CS2 (WEIM_BASE_ADDR + 0x20) +#define WEIM_CTRL_CS3 (WEIM_BASE_ADDR + 0x30) +#define WEIM_CTRL_CS4 (WEIM_BASE_ADDR + 0x40) +#define WEIM_CTRL_CS5 (WEIM_BASE_ADDR + 0x50) +#define M3IF_BASE_ADDR 0xB8003000 +#define EMI_BASE_ADDR 0xB8004000 + +#define NFC_BASE_ADDR 0xBB000000 + +/* + * Memory regions and CS + */ +#define IPU_MEM_BASE_ADDR 0x70000000 +#define CSD0_BASE_ADDR 0x80000000 +#define CSD1_BASE_ADDR 0x90000000 +#define CS0_BASE_ADDR 0xA0000000 +#define CS1_BASE_ADDR 0xA8000000 +#define CS2_BASE_ADDR 0xB0000000 +#define CS3_BASE_ADDR 0xB2000000 +#define CS4_BASE_ADDR 0xB4000000 +#define CS5_BASE_ADDR 0xB6000000 + +/* + * IRQ Controller Register Definitions. + */ +#define AVIC_NIMASK 0x04 +#define AVIC_INTTYPEH 0x18 +#define AVIC_INTTYPEL 0x1C + +/* L210 */ +#define L2CC_BASE_ADDR 0x30000000 +#define L2_CACHE_LINE_SIZE 32 +#define L2_CACHE_CTL_REG 0x100 +#define L2_CACHE_AUX_CTL_REG 0x104 +#define L2_CACHE_SYNC_REG 0x730 +#define L2_CACHE_INV_LINE_REG 0x770 +#define L2_CACHE_INV_WAY_REG 0x77C +#define L2_CACHE_CLEAN_LINE_REG 0x7B0 +#define L2_CACHE_CLEAN_INV_LINE_REG 0x7F0 +#define L2_CACHE_DBG_CTL_REG 0xF40 + +#define CLKMODE_AUTO 0 +#define CLKMODE_CONSUMER 1 + +#define PLL_PD(x) (((x) & 0xf) << 26) +#define PLL_MFD(x) (((x) & 0x3ff) << 16) +#define PLL_MFI(x) (((x) & 0xf) << 10) +#define PLL_MFN(x) (((x) & 0x3ff) << 0) + +#define CSCR_U(x) (WEIM_CTRL_CS#x + 0) +#define CSCR_L(x) (WEIM_CTRL_CS#x + 4) +#define CSCR_A(x) (WEIM_CTRL_CS#x + 8) + +#define IIM_SREV 0x24 +#define ROMPATCH_REV 0x40 + +#define IPU_CONF IPU_CTRL_BASE_ADDR + +#define IPU_CONF_PXL_ENDIAN (1<<8) +#define IPU_CONF_DU_EN (1<<7) +#define IPU_CONF_DI_EN (1<<6) +#define IPU_CONF_ADC_EN (1<<5) +#define IPU_CONF_SDC_EN (1<<4) +#define IPU_CONF_PF_EN (1<<3) +#define IPU_CONF_ROT_EN (1<<2) +#define IPU_CONF_IC_EN (1<<1) +#define IPU_CONF_SCI_EN (1<<0) + +#define GPIO_PORT_NUM 3 +#define GPIO_NUM_PIN 32 + +#define CHIP_REV_1_0 0x10 +#define CHIP_REV_2_0 0x20 + +#define BOARD_REV_1_0 0x0 +#define BOARD_REV_2_0 0x1 + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include <asm/types.h> + +extern void imx_get_mac_from_fuse(unsigned char *mac); + +enum mxc_main_clocks { + CPU_CLK, + AHB_CLK, + IPG_CLK, + IPG_PER_CLK, + NFC_CLK, + USB_CLK, + HSP_CLK, +}; + +enum mxc_peri_clocks { + UART1_BAUD, + UART2_BAUD, + UART3_BAUD, + SSI1_BAUD, + SSI2_BAUD, + CSI_BAUD, + MSHC_CLK, + ESDHC1_CLK, + ESDHC2_CLK, + ESDHC3_CLK, + SPDIF_CLK, + SPI1_CLK, + SPI2_CLK, +}; + +/* Clock Control Module (CCM) registers */ +struct ccm_regs { + u32 ccmr; /* Control */ + u32 pdr0; /* Post divider 0 */ + u32 pdr1; /* Post divider 1 */ + u32 pdr2; /* Post divider 2 */ + u32 pdr3; /* Post divider 3 */ + u32 pdr4; /* Post divider 4 */ + u32 rcsr; /* CCM Status */ + u32 mpctl; /* Core PLL Control */ + u32 ppctl; /* Peripheral PLL Control */ + u32 acmr; /* Audio clock mux */ + u32 cosr; /* Clock out source */ + u32 cgr0; /* Clock Gating Control 0 */ + u32 cgr1; /* Clock Gating Control 1 */ + u32 cgr2; /* Clock Gating Control 2 */ + u32 cgr3; /* Clock Gating Control 3 */ + u32 reserved; + u32 dcvr0; /* DPTC Comparator 0 */ + u32 dcvr1; /* DPTC Comparator 0 */ + u32 dcvr2; /* DPTC Comparator 0 */ + u32 dcvr3; /* DPTC Comparator 0 */ + u32 ltr0; /* Load Tracking 0 */ + u32 ltr1; /* Load Tracking 1 */ + u32 ltr2; /* Load Tracking 2 */ + u32 ltr3; /* Load Tracking 3 */ + u32 ltbr0; /* Load Tracking Buffer 0 */ +}; + +/* IIM control registers */ +struct iim_regs { + u32 iim_stat; + u32 iim_statm; + u32 iim_err; + u32 iim_emask; + u32 iim_fctl; + u32 iim_ua; + u32 iim_la; + u32 iim_sdat; + u32 iim_prev; + u32 iim_srev; + u32 iim_prog_p; + u32 iim_scs0; + u32 iim_scs1; + u32 iim_scs2; + u32 iim_scs3; +}; + +/* General Purpose Timer (GPT) registers */ +struct gpt_regs { + u32 ctrl; /* control */ + u32 pre; /* prescaler */ + u32 stat; /* status */ + u32 intr; /* interrupt */ + u32 cmp[3]; /* output compare 1-3 */ + u32 capt[2]; /* input capture 1-2 */ + u32 counter; /* counter */ +}; + +/* CSPI registers */ +struct cspi_regs { + u32 rxdata; + u32 txdata; + u32 ctrl; + u32 intr; + u32 dma; + u32 stat; + u32 period; + u32 test; +}; + +/* Watchdog Timer (WDOG) registers */ +struct wdog_regs { + u16 wcr; /* Control */ + u16 wsr; /* Service */ + u16 wrsr; /* Reset Status */ + u16 wicr; /* Interrupt Control */ + u16 wmcr; /* Misc Control */ +}; + +/* + * NFMS bit in RCSR register for pagesize of nandflash + */ +#define NFMS_BIT 8 +#define NFMS_NF_DWIDTH 14 +#define NFMS_NF_PG_SZ 8 + +#define CCM_RCSR_NF_16BIT_SEL (1 << 14) + +extern unsigned int get_board_rev(void); +extern int is_soc_rev(int rev); +extern int sdhc_init(void); + +#endif +#endif /* __ASM_ARCH_MX35_H */ diff --git a/arch/arm/include/asm/arch-mx35/iomux.h b/arch/arm/include/asm/arch-mx35/iomux.h new file mode 100644 index 0000000..52c15bc --- /dev/null +++ b/arch/arm/include/asm/arch-mx35/iomux.h @@ -0,0 +1,295 @@ +/* + * (C) Copyright 2011 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MACH_MX35_IOMUX_H__ +#define __MACH_MX35_IOMUX_H__ + +#include <asm/arch/imx-regs.h> + +/* + * various IOMUX functions + */ +typedef enum iomux_pin_config { + MUX_CONFIG_FUNC = 0, /* used as function */ + MUX_CONFIG_ALT1, /* used as alternate function 1 */ + MUX_CONFIG_ALT2, /* used as alternate function 2 */ + MUX_CONFIG_ALT3, /* used as alternate function 3 */ + MUX_CONFIG_ALT4, /* used as alternate function 4 */ + MUX_CONFIG_ALT5, /* used as alternate function 5 */ + MUX_CONFIG_ALT6, /* used as alternate function 6 */ + MUX_CONFIG_ALT7, /* used as alternate function 7 */ + MUX_CONFIG_SION = 0x1 << 4, /* used as LOOPBACK:MUX SION bit */ + MUX_CONFIG_GPIO = MUX_CONFIG_ALT5, /* used as GPIO */ +} iomux_pin_cfg_t; + +/* + * various IOMUX pad functions + */ +typedef enum iomux_pad_config { + PAD_CTL_DRV_3_3V = 0x0 << 13, + PAD_CTL_DRV_1_8V = 0x1 << 13, + PAD_CTL_HYS_CMOS = 0x0 << 8, + PAD_CTL_HYS_SCHMITZ = 0x1 << 8, + PAD_CTL_PKE_NONE = 0x0 << 7, + PAD_CTL_PKE_ENABLE = 0x1 << 7, + PAD_CTL_PUE_KEEPER = 0x0 << 6, + PAD_CTL_PUE_PUD = 0x1 << 6, + PAD_CTL_100K_PD = 0x0 << 4, + PAD_CTL_47K_PU = 0x1 << 4, + PAD_CTL_100K_PU = 0x2 << 4, + PAD_CTL_22K_PU = 0x3 << 4, + PAD_CTL_ODE_CMOS = 0x0 << 3, + PAD_CTL_ODE_OpenDrain = 0x1 << 3, + PAD_CTL_DRV_NORMAL = 0x0 << 1, + PAD_CTL_DRV_HIGH = 0x1 << 1, + PAD_CTL_DRV_MAX = 0x2 << 1, + PAD_CTL_SRE_SLOW = 0x0 << 0, + PAD_CTL_SRE_FAST = 0x1 << 0 +} iomux_pad_config_t; + +/* + * various IOMUX general purpose functions + */ +typedef enum iomux_gp_func { + MUX_SDCTL_CSD0_SEL = 0x1 << 0, + MUX_SDCTL_CSD1_SEL = 0x1 << 1, + MUX_TAMPER_DETECT_EN = 0x1 << 2, +} iomux_gp_func_t; + +/* + * various IOMUX input select register index + */ +typedef enum iomux_input_select { + MUX_IN_AMX_P5_RXCLK = 0, + MUX_IN_AMX_P5_RXFS, + MUX_IN_AMX_P6_DA, + MUX_IN_AMX_P6_DB, + MUX_IN_AMX_P6_RXCLK, + MUX_IN_AMX_P6_RXFS, + MUX_IN_AMX_P6_TXCLK, + MUX_IN_AMX_P6_TXFS, + MUX_IN_CAN1_CANRX, + MUX_IN_CAN2_CANRX, + MUX_IN_CCM_32K_MUXED, + MUX_IN_CCM_PMIC_RDY, + MUX_IN_CSPI1_SS2_B, + MUX_IN_CSPI1_SS3_B, + MUX_IN_CSPI2_CLK_IN, + MUX_IN_CSPI2_DATAREADY_B, + MUX_IN_CSPI2_MISO, + MUX_IN_CSPI2_MOSI, + MUX_IN_CSPI2_SS0_B, + MUX_IN_CSPI2_SS1_B, + MUX_IN_CSPI2_SS2_B, + MUX_IN_CSPI2_SS3_B, + MUX_IN_EMI_WEIM_DTACK_B, + MUX_IN_ESDHC1_DAT4_IN, + MUX_IN_ESDHC1_DAT5_IN, + MUX_IN_ESDHC1_DAT6_IN, + MUX_IN_ESDHC1_DAT7_IN, + MUX_IN_ESDHC3_CARD_CLK_IN, + MUX_IN_ESDHC3_CMD_IN, + MUX_IN_ESDHC3_DAT0, + MUX_IN_ESDHC3_DAT1, + MUX_IN_ESDHC3_DAT2, + MUX_IN_ESDHC3_DAT3, + MUX_IN_GPIO1_IN_0, + MUX_IN_GPIO1_IN_10, + MUX_IN_GPIO1_IN_11, + MUX_IN_GPIO1_IN_1, + MUX_IN_GPIO1_IN_20, + MUX_IN_GPIO1_IN_21, + MUX_IN_GPIO1_IN_22, + MUX_IN_GPIO1_IN_2, + MUX_IN_GPIO1_IN_3, + MUX_IN_GPIO1_IN_4, + MUX_IN_GPIO1_IN_5, + MUX_IN_GPIO1_IN_6, + MUX_IN_GPIO1_IN_7, + MUX_IN_GPIO1_IN_8, + MUX_IN_GPIO1_IN_9, + MUX_IN_GPIO2_IN_0, + MUX_IN_GPIO2_IN_10, + MUX_IN_GPIO2_IN_11, + MUX_IN_GPIO2_IN_12, + MUX_IN_GPIO2_IN_13, + MUX_IN_GPIO2_IN_14, + MUX_IN_GPIO2_IN_15, + MUX_IN_GPIO2_IN_16, + MUX_IN_GPIO2_IN_17, + MUX_IN_GPIO2_IN_18, + MUX_IN_GPIO2_IN_19, + MUX_IN_GPIO2_IN_20, + MUX_IN_GPIO2_IN_21, + MUX_IN_GPIO2_IN_22, + MUX_IN_GPIO2_IN_23, + MUX_IN_GPIO2_IN_24, + MUX_IN_GPIO2_IN_25, + MUX_IN_GPIO2_IN_26, + MUX_IN_GPIO2_IN_27, + MUX_IN_GPIO2_IN_28, + MUX_IN_GPIO2_IN_29, + MUX_IN_GPIO2_IN_2, + MUX_IN_GPIO2_IN_30, + MUX_IN_GPIO2_IN_31, + MUX_IN_GPIO2_IN_3, + MUX_IN_GPIO2_IN_4, + MUX_IN_GPIO2_IN_5, + MUX_IN_GPIO2_IN_6, + MUX_IN_GPIO2_IN_7, + MUX_IN_GPIO2_IN_8, + MUX_IN_GPIO2_IN_9, + MUX_IN_GPIO3_IN_0, + MUX_IN_GPIO3_IN_10, + MUX_IN_GPIO3_IN_11, + MUX_IN_GPIO3_IN_12, + MUX_IN_GPIO3_IN_13, + MUX_IN_GPIO3_IN_14, + MUX_IN_GPIO3_IN_15, + MUX_IN_GPIO3_IN_4, + MUX_IN_GPIO3_IN_5, + MUX_IN_GPIO3_IN_6, + MUX_IN_GPIO3_IN_7, + MUX_IN_GPIO3_IN_8, + MUX_IN_GPIO3_IN_9, + MUX_IN_I2C3_SCL_IN, + MUX_IN_I2C3_SDA_IN, + MUX_IN_IPU_DISPB_D0_VSYNC, + MUX_IN_IPU_DISPB_D12_VSYNC, + MUX_IN_IPU_DISPB_SD_D, + MUX_IN_IPU_SENSB_DATA_0, + MUX_IN_IPU_SENSB_DATA_1, + MUX_IN_IPU_SENSB_DATA_2, + MUX_IN_IPU_SENSB_DATA_3, + MUX_IN_IPU_SENSB_DATA_4, + MUX_IN_IPU_SENSB_DATA_5, + MUX_IN_IPU_SENSB_DATA_6, + MUX_IN_IPU_SENSB_DATA_7, + MUX_IN_KPP_COL_0, + MUX_IN_KPP_COL_1, + MUX_IN_KPP_COL_2, + MUX_IN_KPP_COL_3, + MUX_IN_KPP_COL_4, + MUX_IN_KPP_COL_5, + MUX_IN_KPP_COL_6, + MUX_IN_KPP_COL_7, + MUX_IN_KPP_ROW_0, + MUX_IN_KPP_ROW_1, + MUX_IN_KPP_ROW_2, + MUX_IN_KPP_ROW_3, + MUX_IN_KPP_ROW_4, + MUX_IN_KPP_ROW_5, + MUX_IN_KPP_ROW_6, + MUX_IN_KPP_ROW_7, + MUX_IN_OWIRE_BATTERY_LINE, + MUX_IN_SPDIF_HCKT_CLK2, + MUX_IN_SPDIF_SPDIF_IN1, + MUX_IN_UART3_UART_RTS_B, + MUX_IN_UART3_UART_RXD_MUX, + MUX_IN_USB_OTG_DATA_0, + MUX_IN_USB_OTG_DATA_1, + MUX_IN_USB_OTG_DATA_2, + MUX_IN_USB_OTG_DATA_3, + MUX_IN_USB_OTG_DATA_4, + MUX_IN_USB_OTG_DATA_5, + MUX_IN_USB_OTG_DATA_6, + MUX_IN_USB_OTG_DATA_7, + MUX_IN_USB_OTG_DIR, + MUX_IN_USB_OTG_NXT, + MUX_IN_USB_UH2_DATA_0, + MUX_IN_USB_UH2_DATA_1, + MUX_IN_USB_UH2_DATA_2, + MUX_IN_USB_UH2_DATA_3, + MUX_IN_USB_UH2_DATA_4, + MUX_IN_USB_UH2_DATA_5, + MUX_IN_USB_UH2_DATA_6, + MUX_IN_USB_UH2_DATA_7, + MUX_IN_USB_UH2_DIR, + MUX_IN_USB_UH2_NXT, + MUX_IN_USB_UH2_USB_OC, +} iomux_input_select_t; + +/* + * various IOMUX input functions + */ +typedef enum iomux_input_config { + INPUT_CTL_PATH0 = 0x0, + INPUT_CTL_PATH1, + INPUT_CTL_PATH2, + INPUT_CTL_PATH3, + INPUT_CTL_PATH4, + INPUT_CTL_PATH5, + INPUT_CTL_PATH6, + INPUT_CTL_PATH7, +} iomux_input_cfg_t; + +/* + * Request ownership for an IO pin. This function has to be the first one + * being called before that pin is used. The caller has to check the + * return value to make sure it returns 0. + * + * @param pin a name defined by iomux_pin_name_t + * @param cfg an input function as defined in iomux_pin_cfg_t + * + * @return 0 if successful; Non-zero otherwise + */ +void mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg); + +/* + * Release ownership for an IO pin + * + * @param pin a name defined by iomux_pin_name_t + * @param cfg an input function as defined in iomux_pin_cfg_t + */ +void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg); + +/* + * This function enables/disables the general purpose function for a particular + * signal. + * + * @param gp one signal as defined in iomux_gp_func_t + * @param en 1 to enable; 0 to disable + */ +void mxc_iomux_set_gpr(iomux_gp_func_t gp, int en); + +/* + * This function configures the pad value for a IOMUX pin. + * + * @param pin a pin number as defined in iomux_pin_name_t + * @param config the ORed value of elements defined in + * iomux_pad_config_t + */ +void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config); + +/* + * This function configures input path. + * + * @param input index of input select register as defined in + * iomux_input_select_t + * @param config the binary value of elements defined in + * iomux_input_cfg_t + */ +void mxc_iomux_set_input(iomux_input_select_t input, u32 config); +#endif diff --git a/arch/arm/include/asm/arch-mx35/mx35_pins.h b/arch/arm/include/asm/arch-mx35/mx35_pins.h new file mode 100644 index 0000000..14669ff --- /dev/null +++ b/arch/arm/include/asm/arch-mx35/mx35_pins.h @@ -0,0 +1,355 @@ +/* + * (C) Copyright 2011 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MXC_MX35_PINS_H__ +#define __ASM_ARCH_MXC_MX35_PINS_H__ + +/*! + * @file arch-mxc/mx35_pins.h + * + * @brief MX35 I/O Pin List + * + * @ingroup GPIO_MX35 + */ + +#ifndef __ASSEMBLY__ + +/*! + * @name IOMUX/PAD Bit field definitions + */ + +/*! @{ */ + +/*! + * In order to identify pins more effectively, each mux-controlled pin's + * enumerated value is constructed in the following way: + * + * ------------------------------------------------------------------- + * 31-29 | 28 - 24 |23 - 21| 20 - 10| 9 - 0 + * ------------------------------------------------------------------- + * IO_P | IO_I | RSVD | PAD_I | MUX_I + * ------------------------------------------------------------------- + * + * Bit 0 to 7 contains MUX_I used to identify the register + * offset (base is IOMUX_module_base ) defined in the Section + * "sw_pad_ctl & sw_mux_ctl details" of the IC Spec. The similar field + * definitions are used for the pad control register.the MX35_PIN_A0 is + * defined in the enumeration: ( 0x28 << MUX_I) |( 0x368 << PAD_I) + * So the absolute address is: IOMUX_module_base + 0x28. + * The pad control register offset is: 0x368. + */ + +/*! + * Starting bit position within each entry of \b iomux_pins to represent the + * MUX control register offset + */ +#define MUX_I 0 +/*! + * Starting bit position within each entry of \b iomux_pins to represent the + * PAD control register offset + */ +#define PAD_I 10 + +/*! + * Starting bit position within each entry of \b iomux_pins to represent the + * reserved filed + */ +#define RSVD_I 21 + +#define MUX_IO_P 29 +#define MUX_IO_I 24 +#define IOMUX_TO_GPIO(pin) ((((unsigned int)pin >> MUX_IO_P) * \ + GPIO_NUM_PIN) + ((pin >> MUX_IO_I) &\ + ((1 << (MUX_IO_P - MUX_IO_I)) - 1))) +#define IOMUX_TO_IRQ(pin) (MXC_GPIO_INT_BASE + IOMUX_TO_GPIO(pin)) +#define GPIO_TO_PORT(n) (n / GPIO_NUM_PIN) +#define GPIO_TO_INDEX(n) (n % GPIO_NUM_PIN) + +#define NON_GPIO_I 0x7 +#define PIN_TO_MUX_MASK ((1<<(PAD_I - MUX_I)) - 1) +#define PIN_TO_PAD_MASK ((1<<(RSVD_I - PAD_I)) - 1) +#define NON_MUX_I PIN_TO_MUX_MASK + +#define _MXC_BUILD_PIN(gp, gi, mi, pi) \ + (((gp) << MUX_IO_P) | ((gi) << MUX_IO_I) | \ + ((mi) << MUX_I) | ((pi) << PAD_I)) + +#define _MXC_BUILD_GPIO_PIN(gp, gi, mi, pi) \ + _MXC_BUILD_PIN(gp, gi, mi, pi) + +#define _MXC_BUILD_NON_GPIO_PIN(mi, pi) \ + _MXC_BUILD_PIN(NON_GPIO_I, 0, mi, pi) + +#define PIN_TO_IOMUX_MUX(pin) ((pin >> MUX_I) & PIN_TO_MUX_MASK) +#define PIN_TO_IOMUX_PAD(pin) ((pin >> PAD_I) & PIN_TO_PAD_MASK) + +/*! @} End IOMUX/PAD Bit field definitions */ + +/*! + * This enumeration is constructed based on the Section + * "sw_pad_ctl & sw_mux_ctl details" of the MX35 IC Spec. Each enumerated + * value is constructed based on the rules described above. + */ +typedef enum iomux_pins { + MX35_PIN_CAPTURE = _MXC_BUILD_GPIO_PIN(0, 4, 0x4, 0x328), + MX35_PIN_COMPARE = _MXC_BUILD_GPIO_PIN(0, 5, 0x8, 0x32C), + MX35_PIN_WATCHDOG_RST = _MXC_BUILD_GPIO_PIN(0, 6, 0xC, 0x330), + MX35_PIN_GPIO1_0 = _MXC_BUILD_GPIO_PIN(0, 0, 0x10, 0x334), + MX35_PIN_GPIO1_1 = _MXC_BUILD_GPIO_PIN(0, 1, 0x14, 0x338), + MX35_PIN_GPIO2_0 = _MXC_BUILD_GPIO_PIN(1, 0, 0x18, 0x33C), + MX35_PIN_GPIO3_0 = _MXC_BUILD_GPIO_PIN(2, 1, 0x1C, 0x340), + MX35_PIN_CLKO = _MXC_BUILD_GPIO_PIN(0, 8, 0x20, 0x34C), + + MX35_PIN_POWER_FAIL = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x360), + MX35_PIN_VSTBY = _MXC_BUILD_GPIO_PIN(0, 7, 0x24, 0x364), + MX35_PIN_A0 = _MXC_BUILD_NON_GPIO_PIN(0x28, 0x368), + MX35_PIN_A1 = _MXC_BUILD_NON_GPIO_PIN(0x2C, 0x36C), + MX35_PIN_A2 = _MXC_BUILD_NON_GPIO_PIN(0x30, 0x370), + MX35_PIN_A3 = _MXC_BUILD_NON_GPIO_PIN(0x34, 0x374), + MX35_PIN_A4 = _MXC_BUILD_NON_GPIO_PIN(0x38, 0x378), + MX35_PIN_A5 = _MXC_BUILD_NON_GPIO_PIN(0x3C, 0x37C), + MX35_PIN_A6 = _MXC_BUILD_NON_GPIO_PIN(0x40, 0x380), + MX35_PIN_A7 = _MXC_BUILD_NON_GPIO_PIN(0x44, 0x384), + MX35_PIN_A8 = _MXC_BUILD_NON_GPIO_PIN(0x48, 0x388), + MX35_PIN_A9 = _MXC_BUILD_NON_GPIO_PIN(0x4C, 0x38C), + MX35_PIN_A10 = _MXC_BUILD_NON_GPIO_PIN(0x50, 0x390), + MX35_PIN_MA10 = _MXC_BUILD_NON_GPIO_PIN(0x54, 0x394), + MX35_PIN_A11 = _MXC_BUILD_NON_GPIO_PIN(0x58, 0x398), + MX35_PIN_A12 = _MXC_BUILD_NON_GPIO_PIN(0x5C, 0x39C), + MX35_PIN_A13 = _MXC_BUILD_NON_GPIO_PIN(0x60, 0x3A0), + MX35_PIN_A14 = _MXC_BUILD_NON_GPIO_PIN(0x64, 0x3A4), + MX35_PIN_A15 = _MXC_BUILD_NON_GPIO_PIN(0x68, 0x3A8), + MX35_PIN_A16 = _MXC_BUILD_NON_GPIO_PIN(0x6C, 0x3AC), + MX35_PIN_A17 = _MXC_BUILD_NON_GPIO_PIN(0x70, 0x3B0), + MX35_PIN_A18 = _MXC_BUILD_NON_GPIO_PIN(0x74, 0x3B4), + MX35_PIN_A19 = _MXC_BUILD_NON_GPIO_PIN(0x78, 0x3B8), + MX35_PIN_A20 = _MXC_BUILD_NON_GPIO_PIN(0x7C, 0x3BC), + MX35_PIN_A21 = _MXC_BUILD_NON_GPIO_PIN(0x80, 0x3C0), + MX35_PIN_A22 = _MXC_BUILD_NON_GPIO_PIN(0x84, 0x3C4), + MX35_PIN_A23 = _MXC_BUILD_NON_GPIO_PIN(0x88, 0x3C8), + MX35_PIN_A24 = _MXC_BUILD_NON_GPIO_PIN(0x8C, 0x3CC), + MX35_PIN_A25 = _MXC_BUILD_NON_GPIO_PIN(0x90, 0x3D0), + + MX35_PIN_EB0 = _MXC_BUILD_NON_GPIO_PIN(0x94, 0x46C), + MX35_PIN_EB1 = _MXC_BUILD_NON_GPIO_PIN(0x98, 0x470), + MX35_PIN_OE = _MXC_BUILD_NON_GPIO_PIN(0x9C, 0x474), + MX35_PIN_CS0 = _MXC_BUILD_NON_GPIO_PIN(0xA0, 0x478), + MX35_PIN_CS1 = _MXC_BUILD_NON_GPIO_PIN(0xA4, 0x47C), + MX35_PIN_CS2 = _MXC_BUILD_NON_GPIO_PIN(0xA8, 0x480), + MX35_PIN_CS3 = _MXC_BUILD_NON_GPIO_PIN(0xAC, 0x484), + MX35_PIN_CS4 = _MXC_BUILD_GPIO_PIN(0, 20, 0xB0, 0x488), + MX35_PIN_CS5 = _MXC_BUILD_GPIO_PIN(0, 21, 0xB4, 0x48C), + MX35_PIN_NFCE_B = _MXC_BUILD_GPIO_PIN(0, 22, 0xB8, 0x490), + + MX35_PIN_LBA = _MXC_BUILD_NON_GPIO_PIN(0xBC, 0x498), + MX35_PIN_BCLK = _MXC_BUILD_NON_GPIO_PIN(0xC0, 0x49C), + MX35_PIN_RW = _MXC_BUILD_NON_GPIO_PIN(0xC4, 0x4A0), + + MX35_PIN_NFWE_B = _MXC_BUILD_GPIO_PIN(0, 18, 0xC8, 0x4CC), + MX35_PIN_NFRE_B = _MXC_BUILD_GPIO_PIN(0, 19, 0xCC, 0x4D0), + MX35_PIN_NFALE = _MXC_BUILD_GPIO_PIN(0, 20, 0xD0, 0x4D4), + MX35_PIN_NFCLE = _MXC_BUILD_GPIO_PIN(0, 21, 0xD4, 0x4D8), + MX35_PIN_NFWP_B = _MXC_BUILD_GPIO_PIN(0, 22, 0xD8, 0x4DC), + MX35_PIN_NFRB = _MXC_BUILD_GPIO_PIN(0, 23, 0xDC, 0x4E0), + + MX35_PIN_D15 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4E4), + MX35_PIN_D14 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4E8), + MX35_PIN_D13 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4EC), + MX35_PIN_D12 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4F0), + MX35_PIN_D11 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4F4), + MX35_PIN_D10 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4F8), + MX35_PIN_D9 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4FC), + MX35_PIN_D8 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x500), + MX35_PIN_D7 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x504), + MX35_PIN_D6 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x508), + MX35_PIN_D5 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x50C), + MX35_PIN_D4 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x510), + MX35_PIN_D3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x514), + MX35_PIN_D2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x518), + MX35_PIN_D1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x51C), + MX35_PIN_D0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x520), + + MX35_PIN_CSI_D8 = _MXC_BUILD_GPIO_PIN(0, 20, 0xE0, 0x524), + MX35_PIN_CSI_D9 = _MXC_BUILD_GPIO_PIN(0, 21, 0xE4, 0x528), + MX35_PIN_CSI_D10 = _MXC_BUILD_GPIO_PIN(0, 22, 0xE8, 0x52C), + MX35_PIN_CSI_D11 = _MXC_BUILD_GPIO_PIN(0, 23, 0xEC, 0x530), + MX35_PIN_CSI_D12 = _MXC_BUILD_GPIO_PIN(0, 24, 0xF0, 0x534), + MX35_PIN_CSI_D13 = _MXC_BUILD_GPIO_PIN(0, 25, 0xF4, 0x538), + MX35_PIN_CSI_D14 = _MXC_BUILD_GPIO_PIN(0, 26, 0xF8, 0x53C), + MX35_PIN_CSI_D15 = _MXC_BUILD_GPIO_PIN(0, 27, 0xFC, 0x540), + MX35_PIN_CSI_MCLK = _MXC_BUILD_GPIO_PIN(0, 28, 0x100, 0x544), + MX35_PIN_CSI_VSYNC = _MXC_BUILD_GPIO_PIN(0, 29, 0x104, 0x548), + MX35_PIN_CSI_HSYNC = _MXC_BUILD_GPIO_PIN(0, 30, 0x108, 0x54C), + MX35_PIN_CSI_PIXCLK = _MXC_BUILD_GPIO_PIN(0, 31, 0x10C, 0x550), + + MX35_PIN_I2C1_CLK = _MXC_BUILD_GPIO_PIN(1, 24, 0x110, 0x554), + MX35_PIN_I2C1_DAT = _MXC_BUILD_GPIO_PIN(1, 25, 0x114, 0x558), + MX35_PIN_I2C2_CLK = _MXC_BUILD_GPIO_PIN(1, 26, 0x118, 0x55C), + MX35_PIN_I2C2_DAT = _MXC_BUILD_GPIO_PIN(1, 27, 0x11C, 0x560), + + MX35_PIN_STXD4 = _MXC_BUILD_GPIO_PIN(1, 28, 0x120, 0x564), + MX35_PIN_SRXD4 = _MXC_BUILD_GPIO_PIN(1, 29, 0x124, 0x568), + MX35_PIN_SCK4 = _MXC_BUILD_GPIO_PIN(1, 30, 0x128, 0x56C), + MX35_PIN_STXFS4 = _MXC_BUILD_GPIO_PIN(1, 31, 0x12C, 0x570), + MX35_PIN_STXD5 = _MXC_BUILD_GPIO_PIN(0, 0, 0x130, 0x574), + MX35_PIN_SRXD5 = _MXC_BUILD_GPIO_PIN(0, 1, 0x134, 0x578), + MX35_PIN_SCK5 = _MXC_BUILD_GPIO_PIN(0, 2, 0x138, 0x57C), + MX35_PIN_STXFS5 = _MXC_BUILD_GPIO_PIN(0, 3, 0x13C, 0x580), + + MX35_PIN_SCKR = _MXC_BUILD_GPIO_PIN(0, 4, 0x140, 0x584), + MX35_PIN_FSR = _MXC_BUILD_GPIO_PIN(0, 5, 0x144, 0x588), + MX35_PIN_HCKR = _MXC_BUILD_GPIO_PIN(0, 6, 0x148, 0x58C), + MX35_PIN_SCKT = _MXC_BUILD_GPIO_PIN(0, 7, 0x14C, 0x590), + MX35_PIN_FST = _MXC_BUILD_GPIO_PIN(0, 8, 0x150, 0x594), + MX35_PIN_HCKT = _MXC_BUILD_GPIO_PIN(0, 9, 0x154, 0x598), + MX35_PIN_TX5_RX0 = _MXC_BUILD_GPIO_PIN(0, 10, 0x158, 0x59C), + MX35_PIN_TX4_RX1 = _MXC_BUILD_GPIO_PIN(0, 11, 0x15C, 0x5A0), + MX35_PIN_TX3_RX2 = _MXC_BUILD_GPIO_PIN(0, 12, 0x160, 0x5A4), + MX35_PIN_TX2_RX3 = _MXC_BUILD_GPIO_PIN(0, 13, 0x164, 0x5A8), + MX35_PIN_TX1 = _MXC_BUILD_GPIO_PIN(0, 14, 0x168, 0x5AC), + MX35_PIN_TX0 = _MXC_BUILD_GPIO_PIN(0, 15, 0x16C, 0x5B0), + + MX35_PIN_CSPI1_MOSI = _MXC_BUILD_GPIO_PIN(0, 16, 0x170, 0x5B4), + MX35_PIN_CSPI1_MISO = _MXC_BUILD_GPIO_PIN(0, 17, 0x174, 0x5B8), + MX35_PIN_CSPI1_SS0 = _MXC_BUILD_GPIO_PIN(0, 18, 0x178, 0x5BC), + MX35_PIN_CSPI1_SS1 = _MXC_BUILD_GPIO_PIN(0, 19, 0x17C, 0x5C0), + MX35_PIN_CSPI1_SCLK = _MXC_BUILD_GPIO_PIN(2, 4, 0x180, 0x5C4), + MX35_PIN_CSPI1_SPI_RDY = _MXC_BUILD_GPIO_PIN(2, 5, 0x184, 0x5C8), + + MX35_PIN_RXD1 = _MXC_BUILD_GPIO_PIN(2, 6, 0x188, 0x5CC), + MX35_PIN_TXD1 = _MXC_BUILD_GPIO_PIN(2, 7, 0x18C, 0x5D0), + MX35_PIN_RTS1 = _MXC_BUILD_GPIO_PIN(2, 8, 0x190, 0x5D4), + MX35_PIN_CTS1 = _MXC_BUILD_GPIO_PIN(2, 9, 0x194, 0x5D8), + MX35_PIN_RXD2 = _MXC_BUILD_GPIO_PIN(2, 10, 0x198, 0x5DC), + MX35_PIN_TXD2 = _MXC_BUILD_GPIO_PIN(1, 11, 0x19C, 0x5E0), + MX35_PIN_RTS2 = _MXC_BUILD_GPIO_PIN(1, 12, 0x1A0, 0x5E4), + MX35_PIN_CTS2 = _MXC_BUILD_GPIO_PIN(1, 13, 0x1A4, 0x5E8), + + MX35_PIN_USBOTG_PWR = _MXC_BUILD_GPIO_PIN(2, 14, 0x1A8, 0x60C), + MX35_PIN_USBOTG_OC = _MXC_BUILD_GPIO_PIN(2, 15, 0x1AC, 0x610), + + MX35_PIN_LD0 = _MXC_BUILD_GPIO_PIN(1, 0, 0x1B0, 0x614), + MX35_PIN_LD1 = _MXC_BUILD_GPIO_PIN(1, 1, 0x1B4, 0x618), + MX35_PIN_LD2 = _MXC_BUILD_GPIO_PIN(1, 2, 0x1B8, 0x61C), + MX35_PIN_LD3 = _MXC_BUILD_GPIO_PIN(1, 3, 0x1BC, 0x620), + MX35_PIN_LD4 = _MXC_BUILD_GPIO_PIN(1, 4, 0x1C0, 0x624), + MX35_PIN_LD5 = _MXC_BUILD_GPIO_PIN(1, 5, 0x1C4, 0x628), + MX35_PIN_LD6 = _MXC_BUILD_GPIO_PIN(1, 6, 0x1C8, 0x62C), + MX35_PIN_LD7 = _MXC_BUILD_GPIO_PIN(1, 7, 0x1CC, 0x630), + MX35_PIN_LD8 = _MXC_BUILD_GPIO_PIN(1, 8, 0x1D0, 0x634), + MX35_PIN_LD9 = _MXC_BUILD_GPIO_PIN(1, 9, 0x1D4, 0x638), + MX35_PIN_LD10 = _MXC_BUILD_GPIO_PIN(1, 10, 0x1D8, 0x63C), + MX35_PIN_LD11 = _MXC_BUILD_GPIO_PIN(1, 11, 0x1DC, 0x640), + MX35_PIN_LD12 = _MXC_BUILD_GPIO_PIN(1, 12, 0x1E0, 0x644), + MX35_PIN_LD13 = _MXC_BUILD_GPIO_PIN(1, 13, 0x1E4, 0x648), + MX35_PIN_LD14 = _MXC_BUILD_GPIO_PIN(1, 14, 0x1E8, 0x64C), + MX35_PIN_LD15 = _MXC_BUILD_GPIO_PIN(1, 15, 0x1EC, 0x650), + MX35_PIN_LD16 = _MXC_BUILD_GPIO_PIN(1, 16, 0x1F0, 0x654), + MX35_PIN_LD17 = _MXC_BUILD_GPIO_PIN(1, 17, 0x1F4, 0x658), + MX35_PIN_LD18 = _MXC_BUILD_GPIO_PIN(2, 24, 0x1F8, 0x65C), + MX35_PIN_LD19 = _MXC_BUILD_GPIO_PIN(2, 25, 0x1FC, 0x660), + MX35_PIN_LD20 = _MXC_BUILD_GPIO_PIN(2, 26, 0x200, 0x664), + MX35_PIN_LD21 = _MXC_BUILD_GPIO_PIN(2, 27, 0x204, 0x668), + MX35_PIN_LD22 = _MXC_BUILD_GPIO_PIN(2, 28, 0x208, 0x66C), + MX35_PIN_LD23 = _MXC_BUILD_GPIO_PIN(2, 29, 0x20C, 0x670), + + MX35_PIN_D3_HSYNC = _MXC_BUILD_GPIO_PIN(2, 30, 0x210, 0x674), + MX35_PIN_D3_FPSHIFT = _MXC_BUILD_GPIO_PIN(2, 31, 0x214, 0x678), + MX35_PIN_D3_DRDY = _MXC_BUILD_GPIO_PIN(0, 0, 0x218, 0x67C), + MX35_PIN_CONTRAST = _MXC_BUILD_GPIO_PIN(0, 1, 0x21C, 0x680), + MX35_PIN_D3_VSYNC = _MXC_BUILD_GPIO_PIN(0, 2, 0x220, 0x684), + MX35_PIN_D3_REV = _MXC_BUILD_GPIO_PIN(0, 3, 0x224, 0x688), + MX35_PIN_D3_CLS = _MXC_BUILD_GPIO_PIN(0, 4, 0x228, 0x68C), + MX35_PIN_D3_SPL = _MXC_BUILD_GPIO_PIN(0, 5, 0x22C, 0x690), + + MX35_PIN_SD1_CMD = _MXC_BUILD_GPIO_PIN(0, 6, 0x230, 0x694), + MX35_PIN_SD1_CLK = _MXC_BUILD_GPIO_PIN(0, 7, 0x234, 0x698), + MX35_PIN_SD1_DATA0 = _MXC_BUILD_GPIO_PIN(0, 8, 0x238, 0x69C), + MX35_PIN_SD1_DATA1 = _MXC_BUILD_GPIO_PIN(0, 9, 0x23C, 0x6A0), + MX35_PIN_SD1_DATA2 = _MXC_BUILD_GPIO_PIN(0, 10, 0x240, 0x6A4), + MX35_PIN_SD1_DATA3 = _MXC_BUILD_GPIO_PIN(0, 11, 0x244, 0x6A8), + MX35_PIN_SD2_CMD = _MXC_BUILD_GPIO_PIN(1, 0, 0x248, 0x6AC), + MX35_PIN_SD2_CLK = _MXC_BUILD_GPIO_PIN(1, 1, 0x24C, 0x6B0), + MX35_PIN_SD2_DATA0 = _MXC_BUILD_GPIO_PIN(1, 2, 0x250, 0x6B4), + MX35_PIN_SD2_DATA1 = _MXC_BUILD_GPIO_PIN(1, 3, 0x254, 0x6B8), + MX35_PIN_SD2_DATA2 = _MXC_BUILD_GPIO_PIN(1, 4, 0x258, 0x6BC), + MX35_PIN_SD2_DATA3 = _MXC_BUILD_GPIO_PIN(1, 5, 0x25C, 0x6C0), + + MX35_PIN_ATA_CS0 = _MXC_BUILD_GPIO_PIN(1, 6, 0x260, 0x6C4), + MX35_PIN_ATA_CS1 = _MXC_BUILD_GPIO_PIN(1, 7, 0x264, 0x6C8), + MX35_PIN_ATA_DIOR = _MXC_BUILD_GPIO_PIN(1, 8, 0x268, 0x6CC), + MX35_PIN_ATA_DIOW = _MXC_BUILD_GPIO_PIN(1, 9, 0x26C, 0x6D0), + MX35_PIN_ATA_DMACK = _MXC_BUILD_GPIO_PIN(1, 10, 0x270, 0x6D4), + MX35_PIN_ATA_RESET_B = _MXC_BUILD_GPIO_PIN(1, 11, 0x274, 0x6D8), + MX35_PIN_ATA_IORDY = _MXC_BUILD_GPIO_PIN(1, 12, 0x278, 0x6DC), + MX35_PIN_ATA_DATA0 = _MXC_BUILD_GPIO_PIN(1, 13, 0x27C, 0x6E0), + MX35_PIN_ATA_DATA1 = _MXC_BUILD_GPIO_PIN(1, 14, 0x280, 0x6E4), + MX35_PIN_ATA_DATA2 = _MXC_BUILD_GPIO_PIN(1, 15, 0x284, 0x6E8), + MX35_PIN_ATA_DATA3 = _MXC_BUILD_GPIO_PIN(1, 16, 0x288, 0x6EC), + MX35_PIN_ATA_DATA4 = _MXC_BUILD_GPIO_PIN(1, 17, 0x28C, 0x6F0), + MX35_PIN_ATA_DATA5 = _MXC_BUILD_GPIO_PIN(1, 18, 0x290, 0x6F4), + MX35_PIN_ATA_DATA6 = _MXC_BUILD_GPIO_PIN(1, 19, 0x294, 0x6F8), + MX35_PIN_ATA_DATA7 = _MXC_BUILD_GPIO_PIN(1, 20, 0x298, 0x6FC), + MX35_PIN_ATA_DATA8 = _MXC_BUILD_GPIO_PIN(1, 21, 0x29C, 0x700), + MX35_PIN_ATA_DATA9 = _MXC_BUILD_GPIO_PIN(1, 22, 0x2A0, 0x704), + MX35_PIN_ATA_DATA10 = _MXC_BUILD_GPIO_PIN(1, 23, 0x2A4, 0x708), + MX35_PIN_ATA_DATA11 = _MXC_BUILD_GPIO_PIN(1, 24, 0x2A8, 0x70C), + MX35_PIN_ATA_DATA12 = _MXC_BUILD_GPIO_PIN(1, 25, 0x2AC, 0x710), + MX35_PIN_ATA_DATA13 = _MXC_BUILD_GPIO_PIN(1, 26, 0x2B0, 0x714), + MX35_PIN_ATA_DATA14 = _MXC_BUILD_GPIO_PIN(1, 27, 0x2B4, 0x718), + MX35_PIN_ATA_DATA15 = _MXC_BUILD_GPIO_PIN(1, 28, 0x2B8, 0x71C), + MX35_PIN_ATA_INTRQ = _MXC_BUILD_GPIO_PIN(1, 29, 0x2BC, 0x720), + MX35_PIN_ATA_BUFF_EN = _MXC_BUILD_GPIO_PIN(1, 30, 0x2C0, 0x724), + MX35_PIN_ATA_DMARQ = _MXC_BUILD_GPIO_PIN(1, 31, 0x2C4, 0x728), + MX35_PIN_ATA_DA0 = _MXC_BUILD_GPIO_PIN(2, 0, 0x2C8, 0x72C), + MX35_PIN_ATA_DA1 = _MXC_BUILD_GPIO_PIN(2, 1, 0x2CC, 0x730), + MX35_PIN_ATA_DA2 = _MXC_BUILD_GPIO_PIN(2, 2, 0x2D0, 0x734), + + MX35_PIN_MLB_CLK = _MXC_BUILD_GPIO_PIN(2, 3, 0x2D4, 0x738), + MX35_PIN_MLB_DAT = _MXC_BUILD_GPIO_PIN(2, 4, 0x2D8, 0x73C), + MX35_PIN_MLB_SIG = _MXC_BUILD_GPIO_PIN(2, 5, 0x2DC, 0x740), + + MX35_PIN_FEC_TX_CLK = _MXC_BUILD_GPIO_PIN(2, 6, 0x2E0, 0x744), + MX35_PIN_FEC_RX_CLK = _MXC_BUILD_GPIO_PIN(2, 7, 0x2E4, 0x748), + MX35_PIN_FEC_RX_DV = _MXC_BUILD_GPIO_PIN(2, 8, 0x2E8, 0x74C), + MX35_PIN_FEC_COL = _MXC_BUILD_GPIO_PIN(2, 9, 0x2EC, 0x750), + MX35_PIN_FEC_RDATA0 = _MXC_BUILD_GPIO_PIN(2, 10, 0x2F0, 0x754), + MX35_PIN_FEC_TDATA0 = _MXC_BUILD_GPIO_PIN(2, 11, 0x2F4, 0x758), + MX35_PIN_FEC_TX_EN = _MXC_BUILD_GPIO_PIN(2, 12, 0x2F8, 0x75C), + MX35_PIN_FEC_MDC = _MXC_BUILD_GPIO_PIN(2, 13, 0x2FC, 0x760), + MX35_PIN_FEC_MDIO = _MXC_BUILD_GPIO_PIN(2, 14, 0x300, 0x764), + MX35_PIN_FEC_TX_ERR = _MXC_BUILD_GPIO_PIN(2, 15, 0x304, 0x768), + MX35_PIN_FEC_RX_ERR = _MXC_BUILD_GPIO_PIN(2, 16, 0x308, 0x76C), + MX35_PIN_FEC_CRS = _MXC_BUILD_GPIO_PIN(2, 17, 0x30C, 0x770), + MX35_PIN_FEC_RDATA1 = _MXC_BUILD_GPIO_PIN(2, 18, 0x310, 0x774), + MX35_PIN_FEC_TDATA1 = _MXC_BUILD_GPIO_PIN(2, 19, 0x314, 0x778), + MX35_PIN_FEC_RDATA2 = _MXC_BUILD_GPIO_PIN(2, 20, 0x318, 0x77C), + MX35_PIN_FEC_TDATA2 = _MXC_BUILD_GPIO_PIN(2, 21, 0x31C, 0x780), + MX35_PIN_FEC_RDATA3 = _MXC_BUILD_GPIO_PIN(2, 22, 0x320, 0x784), + MX35_PIN_FEC_TDATA3 = _MXC_BUILD_GPIO_PIN(2, 23, 0x324, 0x788), +} iomux_pin_name_t; + +#endif +#endif diff --git a/arch/arm/include/asm/arch-mx35/sys_proto.h b/arch/arm/include/asm/arch-mx35/sys_proto.h new file mode 100644 index 0000000..422eb52 --- /dev/null +++ b/arch/arm/include/asm/arch-mx35/sys_proto.h @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2011 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +u32 get_cpu_rev(void); +#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) +void sdelay(unsigned long); + +#endif diff --git a/arch/arm/include/asm/arch-mx5/asm-offsets.h b/arch/arm/include/asm/arch-mx5/asm-offsets.h index afd2728..793f69c 100644 --- a/arch/arm/include/asm/arch-mx5/asm-offsets.h +++ b/arch/arm/include/asm/arch-mx5/asm-offsets.h @@ -37,7 +37,12 @@ #define CLKCTL_CCGR4 0x78 #define CLKCTL_CCGR5 0x7C #define CLKCTL_CCGR6 0x80 +#if defined(CONFIG_MX53) +#define CLKCTL_CCGR7 0x84 +#define CLKCTL_CMEOR 0x88 +#elif defined(CONFIG_MX51) #define CLKCTL_CMEOR 0x84 +#endif /* DPLL */ #define PLL_DP_CTL 0x00 diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index b45026d..a1849f8 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -20,38 +20,36 @@ * MA 02111-1307 USA */ -#ifndef __ASM_ARCH_MXC_MX51_H__ -#define __ASM_ARCH_MXC_MX51_H__ +#ifndef __ASM_ARCH_MX5_IMX_REGS_H__ +#define __ASM_ARCH_MX5_IMX_REGS_H__ -/* - * IRAM - */ +#if defined(CONFIG_MX51) #define IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ -#define IRAM_SIZE 0x00020000 /* 128 KB */ -/* - * Graphics Memory of GPU - */ -#define GPU_BASE_ADDR 0x20000000 -#define GPU_CTRL_BASE_ADDR 0x30000000 #define IPU_CTRL_BASE_ADDR 0x40000000 -/* - * Debug - */ -#define DEBUG_BASE_ADDR 0x60000000 -#define ETB_BASE_ADDR (DEBUG_BASE_ADDR + 0x00001000) -#define ETM_BASE_ADDR (DEBUG_BASE_ADDR + 0x00002000) -#define TPIU_BASE_ADDR (DEBUG_BASE_ADDR + 0x00003000) -#define CTI0_BASE_ADDR (DEBUG_BASE_ADDR + 0x00004000) -#define CTI1_BASE_ADDR (DEBUG_BASE_ADDR + 0x00005000) -#define CTI2_BASE_ADDR (DEBUG_BASE_ADDR + 0x00006000) -#define CTI3_BASE_ADDR (DEBUG_BASE_ADDR + 0x00007000) -#define CORTEX_DBG_BASE_ADDR (DEBUG_BASE_ADDR + 0x00008000) +#define SPBA0_BASE_ADDR 0x70000000 +#define AIPS1_BASE_ADDR 0x73F00000 +#define AIPS2_BASE_ADDR 0x83F00000 +#define CSD0_BASE_ADDR 0x90000000 +#define CSD1_BASE_ADDR 0xA0000000 +#define NFC_BASE_ADDR_AXI 0xCFFF0000 +#elif defined(CONFIG_MX53) +#define IPU_CTRL_BASE_ADDR 0x18000000 +#define SPBA0_BASE_ADDR 0x50000000 +#define AIPS1_BASE_ADDR 0x53F00000 +#define AIPS2_BASE_ADDR 0x63F00000 +#define CSD0_BASE_ADDR 0x70000000 +#define CSD1_BASE_ADDR 0xB0000000 +#define NFC_BASE_ADDR_AXI 0xF7FF0000 +#define IRAM_BASE_ADDR 0xF8000000 +#else +#error "CPU_TYPE not defined" +#endif + +#define IRAM_SIZE 0x00020000 /* 128 KB */ /* * SPBA global module enabled #0 */ -#define SPBA0_BASE_ADDR 0x70000000 - #define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) #define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) #define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) @@ -68,8 +66,6 @@ /* * AIPS 1 */ -#define AIPS1_BASE_ADDR 0x73F00000 - #define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) #define GPIO1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) #define GPIO2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) @@ -91,11 +87,14 @@ #define CCM_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D4000) #define GPC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D8000) +#if defined(CONFIG_MX53) +#define GPIO5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000DC000) +#define GPIO6_BASE_ADDR (AIPS1_BASE_ADDR + 0x000E0000) +#define GPIO7_BASE_ADDR (AIPS1_BASE_ADDR + 0x000E4000) +#endif /* * AIPS 2 */ -#define AIPS2_BASE_ADDR 0x83F00000 - #define PLL1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) #define PLL2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000) #define PLL3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00088000) @@ -129,30 +128,7 @@ #define VPU_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F4000) #define SAHARA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F8000) -#define TZIC_BASE_ADDR 0x8FFFC000 - -/* - * Memory regions and CS - */ -#define CSD0_BASE_ADDR 0x90000000 -#define CSD1_BASE_ADDR 0xA0000000 -#define CS0_BASE_ADDR 0xB0000000 -#define CS1_BASE_ADDR 0xB8000000 -#define CS2_BASE_ADDR 0xC0000000 -#define CS3_BASE_ADDR 0xC8000000 -#define CS4_BASE_ADDR 0xCC000000 -#define CS5_BASE_ADDR 0xCE000000 - /* - * NFC - */ -#define NFC_BASE_ADDR_AXI 0xCFFF0000 /* NAND flash AXI */ - -/*! - * Number of GPIO port as defined in the IC Spec - */ -#define GPIO_PORT_NUM 4 -/*! * Number of GPIO pins per port */ #define GPIO_NUM_PIN 32 @@ -280,6 +256,18 @@ struct src { u32 simr; }; +/* CSPI registers */ +struct cspi_regs { + u32 rxdata; + u32 txdata; + u32 ctrl; + u32 cfg; + u32 intr; + u32 dma; + u32 stat; + u32 period; +}; + struct iim_regs { u32 stat; u32 statm; @@ -311,4 +299,4 @@ struct fuse_bank1_regs { #endif /* __ASSEMBLER__*/ -#endif /* __ASM_ARCH_MXC_MX51_H__ */ +#endif /* __ASM_ARCH_MX5_IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-mx5/iomux.h b/arch/arm/include/asm/arch-mx5/iomux.h index 0d91a24..760371b 100644 --- a/arch/arm/include/asm/arch-mx5/iomux.h +++ b/arch/arm/include/asm/arch-mx5/iomux.h @@ -70,108 +70,6 @@ typedef enum iomux_pad_config { PAD_CTL_DRV_VOT_HIGH = 0x1 << 13,/* High voltage mode */ } iomux_pad_config_t; -/* various IOMUX input select register index */ -typedef enum iomux_input_select { - MUX_IN_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0, - MUX_IN_AUDMUX_P4_INPUT_DB_AMX_SELECT_I, - MUX_IN_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P5_INPUT_DA_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P5_INPUT_DB_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P5_INPUT_RXFS_AMX_SELECT, - MUX_IN_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P6_INPUT_DA_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P6_INPUT_DB_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P6_INPUT_RXCLK_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P6_INPUT_RXFS_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P6_INPUT_TXCLK_AMX_SELECT_INPUT, - MUX_IN_AUDMUX_P6_INPUT_TXFS_AMX_SELECT_INPUT, - MUX_IN_CCM_IPP_DI_CLK_SELECT_INPUT, - /* TO2 */ - MUX_IN_CCM_IPP_DI1_CLK_SELECT_INPUT, - MUX_IN_CCM_PLL1_BYPASS_CLK_SELECT_INPUT, - MUX_IN_CCM_PLL2_BYPASS_CLK_SELECT_INPUT, - MUX_IN_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, - MUX_IN_CSPI_IPP_IND_MISO_SELECT_INPUT, - MUX_IN_CSPI_IPP_IND_MOSI_SELECT_INPUT, - MUX_IN_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, - MUX_IN_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, - MUX_IN_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, - MUX_IN_DPLLIP1_L1T_TOG_EN_SELECT_INPUT, - /* TO2 */ - MUX_IN_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, - MUX_IN_ECSPI2_IPP_IND_SS_B_3_SELECT_INPUT, - MUX_IN_EMI_IPP_IND_RDY_INT_SELECT_INPUT, - MUX_IN_ESDHC3_IPP_DAT0_IN_SELECT_INPUT, - MUX_IN_ESDHC3_IPP_DAT1_IN_SELECT_INPUT, - MUX_IN_ESDHC3_IPP_DAT2_IN_SELECT_INPUT, - MUX_IN_ESDHC3_IPP_DAT3_IN_SELECT_INPUT, - MUX_IN_FEC_FEC_COL_SELECT_INPUT, - MUX_IN_FEC_FEC_CRS_SELECT_INPUT, - MUX_IN_FEC_FEC_MDI_SELECT_INPUT, - MUX_IN_FEC_FEC_RDATA_0_SELECT_INPUT, - MUX_IN_FEC_FEC_RDATA_1_SELECT_INPUT, - MUX_IN_FEC_FEC_RDATA_2_SELECT_INPUT, - MUX_IN_FEC_FEC_RDATA_3_SELECT_INPUT, - MUX_IN_FEC_FEC_RX_CLK_SELECT_INPUT, - MUX_IN_FEC_FEC_RX_DV_SELECT_INPUT, - MUX_IN_FEC_FEC_RX_ER_SELECT_INPUT, - MUX_IN_FEC_FEC_TX_CLK_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_1_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_2_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_3_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_5_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_6_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_7_SELECT_INPUT, - MUX_IN_GPIO3_IPP_IND_G_IN_8_SELECT_INPUT, - /* TO2 */ - MUX_IN_GPIO3_IPP_IND_G_IN_12_SELECT_INPUT, - MUX_IN_HSC_MIPI_MIX_IPP_IND_SENS1_DATA_EN_SELECT_INPUT, - MUX_IN_HSC_MIPI_MIX_IPP_IND_SENS2_DATA_EN_SELECT_INPUT, - /* TO2 */ - MUX_IN_HSC_MIPI_MIX_PAR_VSYNC_SELECT_INPUT, - /* TO2 */ - MUX_IN_HSC_MIPI_MIX_PAR_DI_WAIT_SELECT_INPUT, - MUX_IN_HSC_MIPI_MIX_PAR_SISG_TRIG_SELECT_INPUT, - MUX_IN_I2C1_IPP_SCL_IN_SELECT_INPUT, - MUX_IN_I2C1_IPP_SDA_IN_SELECT_INPUT, - MUX_IN_I2C2_IPP_SCL_IN_SELECT_INPUT, - MUX_IN_I2C2_IPP_SDA_IN_SELECT_INPUT, - - MUX_IN_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT, - - MUX_IN_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT, - - MUX_IN_KPP_IPP_IND_COL_6_SELECT_INPUT, - MUX_IN_KPP_IPP_IND_COL_7_SELECT_INPUT, - MUX_IN_KPP_IPP_IND_ROW_4_SELECT_INPUT, - MUX_IN_KPP_IPP_IND_ROW_5_SELECT_INPUT, - MUX_IN_KPP_IPP_IND_ROW_6_SELECT_INPUT, - MUX_IN_KPP_IPP_IND_ROW_7_SELECT_INPUT, - MUX_IN_UART1_IPP_UART_RTS_B_SELECT_INPUT, - MUX_IN_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, - MUX_IN_UART2_IPP_UART_RTS_B_SELECT_INPUT, - MUX_IN_UART2_IPP_UART_RXD_MUX_SELECT_INPUT, - MUX_IN_UART3_IPP_UART_RTS_B_SELECT_INPUT, - MUX_IN_UART3_IPP_UART_RXD_MUX_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_CLK_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_0_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_1_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_2_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_3_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_4_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_5_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_6_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DATA_7_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_DIR_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_NXT_SELECT_INPUT, - MUX_IN_USBOH3_IPP_IND_UH3_STP_SELECT_INPUT, - MUX_INPUT_NUM_MUX, -} iomux_input_select_t; - /* various IOMUX input functions */ typedef enum iomux_input_config { INPUT_CTL_PATH0 = 0x0, diff --git a/arch/arm/include/asm/arch-mx5/mx5x_pins.h b/arch/arm/include/asm/arch-mx5/mx5x_pins.h index a564fce..4e3a31b 100644 --- a/arch/arm/include/asm/arch-mx5/mx5x_pins.h +++ b/arch/arm/include/asm/arch-mx5/mx5x_pins.h @@ -86,12 +86,22 @@ #define PIN_TO_PAD_MASK ((1 << (GPIO_I - PAD_I)) - 1) #define PIN_TO_ALT_GPIO_MASK ((1 << (MUX_IO_I - GPIO_I)) - 1) -#define NON_MUX_I PIN_TO_MUX_MASK +#define NON_MUX_I PIN_TO_MUX_MASK +#define NON_PAD_I PIN_TO_PAD_MASK + +#if defined(CONFIG_MX51) #define MUX_I_START 0x001C #define PAD_I_START 0x3F0 #define INPUT_CTL_START 0x8C4 -#define INPUT_CTL_START_TO1 0x928 #define MUX_I_END (PAD_I_START - 4) +#elif defined(CONFIG_MX53) +#define MUX_I_START 0x0020 +#define PAD_I_START 0x348 +#define INPUT_CTL_START 0x730 +#define MUX_I_END (PAD_I_START - 4) +#else +#error "CPU_TYPE not defined" +#endif #define _MXC_BUILD_PIN(gp, gi, ga, mi, pi) \ (((gp) << MUX_IO_P) | ((gi) << MUX_IO_I) | \ @@ -115,7 +125,7 @@ * "sw_pad_ctl & sw_mux_ctl details" of the MX51 IC Spec. Each enumerated * value is constructed based on the rules described above. */ -enum iomux_pins { +enum { MX51_PIN_EIM_DA0 = _MXC_BUILD_NON_GPIO_PIN(0x1C, 0x7A8), MX51_PIN_EIM_DA1 = _MXC_BUILD_NON_GPIO_PIN(0x20, 0x7A8), MX51_PIN_EIM_DA2 = _MXC_BUILD_NON_GPIO_PIN(0x24, 0x7A8), @@ -414,5 +424,458 @@ enum iomux_pins { MX51_PIN_CTL_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4E0), }; +enum { + MX53_PIN_GPIO_19 = _MXC_BUILD_GPIO_PIN(3, 5, 1, 0x20, 0x348), + MX53_PIN_KEY_COL0 = _MXC_BUILD_GPIO_PIN(3, 6, 1, 0x24, 0x34C), + MX53_PIN_KEY_ROW0 = _MXC_BUILD_GPIO_PIN(3, 7, 1, 0x28, 0x350), + MX53_PIN_KEY_COL1 = _MXC_BUILD_GPIO_PIN(3, 8, 1, 0x2C, 0x354), + MX53_PIN_KEY_ROW1 = _MXC_BUILD_GPIO_PIN(3, 9, 1, 0x30, 0x358), + MX53_PIN_KEY_COL2 = _MXC_BUILD_GPIO_PIN(3, 10, 1, 0x34, 0x35C), + MX53_PIN_KEY_ROW2 = _MXC_BUILD_GPIO_PIN(3, 11, 1, 0x38, 0x360), + MX53_PIN_KEY_COL3 = _MXC_BUILD_GPIO_PIN(3, 12, 1, 0x3C, 0x364), + MX53_PIN_KEY_ROW3 = _MXC_BUILD_GPIO_PIN(3, 13, 1, 0x40, 0x368), + MX53_PIN_KEY_COL4 = _MXC_BUILD_GPIO_PIN(3, 14, 1, 0x44, 0x36C), + MX53_PIN_KEY_ROW4 = _MXC_BUILD_GPIO_PIN(3, 15, 1, 0x48, 0x370), + MX53_PIN_NVCC_KEYPAD = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x374), + MX53_PIN_DI0_DISP_CLK = _MXC_BUILD_GPIO_PIN(3, 16, 1, 0x4C, 0x378), + MX53_PIN_DI0_PIN15 = _MXC_BUILD_GPIO_PIN(3, 17, 1, 0x50, 0x37C), + MX53_PIN_DI0_PIN2 = _MXC_BUILD_GPIO_PIN(3, 18, 1, 0x54, 0x380), + MX53_PIN_DI0_PIN3 = _MXC_BUILD_GPIO_PIN(3, 19, 1, 0x58, 0x384), + MX53_PIN_DI0_PIN4 = _MXC_BUILD_GPIO_PIN(3, 20, 1, 0x5C, 0x388), + MX53_PIN_DISP0_DAT0 = _MXC_BUILD_GPIO_PIN(3, 21, 1, 0x60, 0x38C), + MX53_PIN_DISP0_DAT1 = _MXC_BUILD_GPIO_PIN(3, 22, 1, 0x64, 0x390), + MX53_PIN_DISP0_DAT2 = _MXC_BUILD_GPIO_PIN(3, 23, 1, 0x68, 0x394), + MX53_PIN_DISP0_DAT3 = _MXC_BUILD_GPIO_PIN(3, 24, 1, 0x6C, 0x398), + MX53_PIN_DISP0_DAT4 = _MXC_BUILD_GPIO_PIN(3, 25, 1, 0x70, 0x39C), + MX53_PIN_DISP0_DAT5 = _MXC_BUILD_GPIO_PIN(3, 26, 1, 0x74, 0x3A0), + MX53_PIN_DISP0_DAT6 = _MXC_BUILD_GPIO_PIN(3, 27, 1, 0x78, 0x3A4), + MX53_PIN_DISP0_DAT7 = _MXC_BUILD_GPIO_PIN(3, 28, 1, 0x7C, 0x3A8), + MX53_PIN_DISP0_DAT8 = _MXC_BUILD_GPIO_PIN(3, 29, 1, 0x80, 0x3AC), + MX53_PIN_DISP0_DAT9 = _MXC_BUILD_GPIO_PIN(3, 30, 1, 0x84, 0x3B0), + MX53_PIN_DISP0_DAT10 = _MXC_BUILD_GPIO_PIN(3, 31, 1, 0x88, 0x3B4), + MX53_PIN_DISP0_DAT11 = _MXC_BUILD_GPIO_PIN(4, 5, 1, 0x8C, 0x3B8), + MX53_PIN_DISP0_DAT12 = _MXC_BUILD_GPIO_PIN(4, 6, 1, 0x90, 0x3BC), + MX53_PIN_DISP0_DAT13 = _MXC_BUILD_GPIO_PIN(4, 7, 1, 0x94, 0x3C0), + MX53_PIN_DISP0_DAT14 = _MXC_BUILD_GPIO_PIN(4, 8, 1, 0x98, 0x3C4), + MX53_PIN_DISP0_DAT15 = _MXC_BUILD_GPIO_PIN(4, 9, 1, 0x9C, 0x3C8), + MX53_PIN_DISP0_DAT16 = _MXC_BUILD_GPIO_PIN(4, 10, 1, 0xA0, 0x3CC), + MX53_PIN_DISP0_DAT17 = _MXC_BUILD_GPIO_PIN(4, 11, 1, 0xA4, 0x3D0), + MX53_PIN_DISP0_DAT18 = _MXC_BUILD_GPIO_PIN(4, 12, 1, 0xA8, 0x3D4), + MX53_PIN_DISP0_DAT19 = _MXC_BUILD_GPIO_PIN(4, 13, 1, 0xAC, 0x3D8), + MX53_PIN_DISP0_DAT20 = _MXC_BUILD_GPIO_PIN(4, 14, 1, 0xB0, 0x3DC), + MX53_PIN_DISP0_DAT21 = _MXC_BUILD_GPIO_PIN(4, 15, 1, 0xB4, 0x3E0), + MX53_PIN_DISP0_DAT22 = _MXC_BUILD_GPIO_PIN(4, 16, 1, 0xB8, 0x3E4), + MX53_PIN_DISP0_DAT23 = _MXC_BUILD_GPIO_PIN(4, 17, 1, 0xBC, 0x3E8), + MX53_PIN_CSI0_PIXCLK = _MXC_BUILD_GPIO_PIN(4, 18, 1, 0xC0, 0x3EC), + MX53_PIN_CSI0_MCLK = _MXC_BUILD_GPIO_PIN(4, 19, 1, 0xC4, 0x3F0), + MX53_PIN_CSI0_DATA_EN = _MXC_BUILD_GPIO_PIN(4, 20, 1, 0xC8, 0x3F4), + MX53_PIN_CSI0_VSYNC = _MXC_BUILD_GPIO_PIN(4, 21, 1, 0xCC, 0x3F8), + MX53_PIN_CSI0_D4 = _MXC_BUILD_GPIO_PIN(4, 22, 1, 0xD0, 0x3FC), + MX53_PIN_CSI0_D5 = _MXC_BUILD_GPIO_PIN(4, 23, 1, 0xD4, 0x400), + MX53_PIN_CSI0_D6 = _MXC_BUILD_GPIO_PIN(4, 24, 1, 0xD8, 0x404), + MX53_PIN_CSI0_D7 = _MXC_BUILD_GPIO_PIN(4, 25, 1, 0xDC, 0x408), + MX53_PIN_CSI0_D8 = _MXC_BUILD_GPIO_PIN(4, 26, 1, 0xE0, 0x40C), + MX53_PIN_CSI0_D9 = _MXC_BUILD_GPIO_PIN(4, 27, 1, 0xE4, 0x410), + MX53_PIN_CSI0_D10 = _MXC_BUILD_GPIO_PIN(4, 28, 1, 0xE8, 0x414), + MX53_PIN_CSI0_D11 = _MXC_BUILD_GPIO_PIN(4, 29, 1, 0xEC, 0x418), + MX53_PIN_CSI0_D12 = _MXC_BUILD_GPIO_PIN(4, 30, 1, 0xF0, 0x41C), + MX53_PIN_CSI0_D13 = _MXC_BUILD_GPIO_PIN(4, 31, 1, 0xF4, 0x420), + MX53_PIN_CSI0_D14 = _MXC_BUILD_GPIO_PIN(5, 0, 1, 0xF8, 0x424), + MX53_PIN_CSI0_D15 = _MXC_BUILD_GPIO_PIN(5, 1, 1, 0xFC, 0x428), + MX53_PIN_CSI0_D16 = _MXC_BUILD_GPIO_PIN(5, 2, 1, 0x100, 0x42C), + MX53_PIN_CSI0_D17 = _MXC_BUILD_GPIO_PIN(5, 3, 1, 0x104, 0x430), + MX53_PIN_CSI0_D18 = _MXC_BUILD_GPIO_PIN(5, 4, 1, 0x108, 0x434), + MX53_PIN_CSI0_D19 = _MXC_BUILD_GPIO_PIN(5, 5, 1, 0x10C, 0x438), + MX53_PIN_NVCC_CSI0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x43C), + MX53_PIN_JTAG_TMS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x440), + MX53_PIN_JTAG_MOD = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x444), + MX53_PIN_JTAG_TRSTB = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x448), + MX53_PIN_JTAG_TDI = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x44C), + MX53_PIN_JTAG_TCK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x450), + MX53_PIN_JTAG_TDO = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x454), + MX53_PIN_EIM_A25 = _MXC_BUILD_GPIO_PIN(4, 2, 1, 0x110, 0x458), + MX53_PIN_EIM_EB2 = _MXC_BUILD_GPIO_PIN(1, 30, 1, 0x114, 0x45C), + MX53_PIN_EIM_D16 = _MXC_BUILD_GPIO_PIN(2, 16, 1, 0x118, 0x460), + MX53_PIN_EIM_D17 = _MXC_BUILD_GPIO_PIN(2, 17, 1, 0x11C, 0x464), + MX53_PIN_EIM_D18 = _MXC_BUILD_GPIO_PIN(2, 18, 1, 0x120, 0x468), + MX53_PIN_EIM_D19 = _MXC_BUILD_GPIO_PIN(2, 19, 1, 0x124, 0x46C), + MX53_PIN_EIM_D20 = _MXC_BUILD_GPIO_PIN(2, 20, 1, 0x128, 0x470), + MX53_PIN_EIM_D21 = _MXC_BUILD_GPIO_PIN(2, 21, 1, 0x12C, 0x474), + MX53_PIN_EIM_D22 = _MXC_BUILD_GPIO_PIN(2, 22, 1, 0x130, 0x478), + MX53_PIN_EIM_D23 = _MXC_BUILD_GPIO_PIN(2, 23, 1, 0x134, 0x47C), + MX53_PIN_EIM_EB3 = _MXC_BUILD_GPIO_PIN(1, 31, 1, 0x138, 0x480), + MX53_PIN_EIM_D24 = _MXC_BUILD_GPIO_PIN(2, 24, 1, 0x13C, 0x484), + MX53_PIN_EIM_D25 = _MXC_BUILD_GPIO_PIN(2, 25, 1, 0x140, 0x488), + MX53_PIN_EIM_D26 = _MXC_BUILD_GPIO_PIN(2, 26, 1, 0x144, 0x48C), + MX53_PIN_EIM_D27 = _MXC_BUILD_GPIO_PIN(2, 27, 1, 0x148, 0x490), + MX53_PIN_EIM_D28 = _MXC_BUILD_GPIO_PIN(2, 28, 1, 0x14C, 0x494), + MX53_PIN_EIM_D29 = _MXC_BUILD_GPIO_PIN(2, 29, 1, 0x150, 0x498), + MX53_PIN_EIM_D30 = _MXC_BUILD_GPIO_PIN(2, 30, 1, 0x154, 0x49C), + MX53_PIN_EIM_D31 = _MXC_BUILD_GPIO_PIN(2, 31, 1, 0x158, 0x4A0), + MX53_PIN_NVCC_EIM1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4A4), + MX53_PIN_EIM_A24 = _MXC_BUILD_GPIO_PIN(4, 4, 1, 0x15C, 0x4A8), + MX53_PIN_EIM_A23 = _MXC_BUILD_GPIO_PIN(5, 6, 1, 0x160, 0x4AC), + MX53_PIN_EIM_A22 = _MXC_BUILD_GPIO_PIN(1, 16, 1, 0x164, 0x4B0), + MX53_PIN_EIM_A21 = _MXC_BUILD_GPIO_PIN(1, 17, 1, 0x168, 0x4B4), + MX53_PIN_EIM_A20 = _MXC_BUILD_GPIO_PIN(1, 18, 1, 0x16C, 0x4B8), + MX53_PIN_EIM_A19 = _MXC_BUILD_GPIO_PIN(1, 19, 1, 0x170, 0x4BC), + MX53_PIN_EIM_A18 = _MXC_BUILD_GPIO_PIN(1, 20, 1, 0x174, 0x4C0), + MX53_PIN_EIM_A17 = _MXC_BUILD_GPIO_PIN(1, 21, 1, 0x178, 0x4C4), + MX53_PIN_EIM_A16 = _MXC_BUILD_GPIO_PIN(1, 22, 1, 0x17C, 0x4C8), + MX53_PIN_EIM_CS0 = _MXC_BUILD_GPIO_PIN(1, 23, 1, 0x180, 0x4CC), + MX53_PIN_EIM_CS1 = _MXC_BUILD_GPIO_PIN(1, 24, 1, 0x184, 0x4D0), + MX53_PIN_EIM_OE = _MXC_BUILD_GPIO_PIN(1, 25, 1, 0x188, 0x4D4), + MX53_PIN_EIM_RW = _MXC_BUILD_GPIO_PIN(1, 26, 1, 0x18C, 0x4D8), + MX53_PIN_EIM_LBA = _MXC_BUILD_GPIO_PIN(1, 27, 1, 0x190, 0x4DC), + MX53_PIN_NVCC_EIM4 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4E0), + MX53_PIN_EIM_EB0 = _MXC_BUILD_GPIO_PIN(1, 28, 1, 0x194, 0x4E4), + MX53_PIN_EIM_EB1 = _MXC_BUILD_GPIO_PIN(1, 29, 1, 0x198, 0x4E8), + MX53_PIN_EIM_DA0 = _MXC_BUILD_GPIO_PIN(2, 0, 1, 0x19C, 0x4EC), + MX53_PIN_EIM_DA1 = _MXC_BUILD_GPIO_PIN(2, 1, 1, 0x1A0, 0x4F0), + MX53_PIN_EIM_DA2 = _MXC_BUILD_GPIO_PIN(2, 2, 1, 0x1A4, 0x4F4), + MX53_PIN_EIM_DA3 = _MXC_BUILD_GPIO_PIN(2, 3, 1, 0x1A8, 0x4F8), + MX53_PIN_EIM_DA4 = _MXC_BUILD_GPIO_PIN(2, 4, 1, 0x1AC, 0x4FC), + MX53_PIN_EIM_DA5 = _MXC_BUILD_GPIO_PIN(2, 5, 1, 0x1B0, 0x500), + MX53_PIN_EIM_DA6 = _MXC_BUILD_GPIO_PIN(2, 6, 1, 0x1B4, 0x504), + MX53_PIN_EIM_DA7 = _MXC_BUILD_GPIO_PIN(2, 7, 1, 0x1B8, 0x508), + MX53_PIN_EIM_DA8 = _MXC_BUILD_GPIO_PIN(2, 8, 1, 0x1BC, 0x50C), + MX53_PIN_EIM_DA9 = _MXC_BUILD_GPIO_PIN(2, 9, 1, 0x1C0, 0x510), + MX53_PIN_EIM_DA10 = _MXC_BUILD_GPIO_PIN(2, 10, 1, 0x1C4, 0x514), + MX53_PIN_EIM_DA11 = _MXC_BUILD_GPIO_PIN(2, 11, 1, 0x1C8, 0x518), + MX53_PIN_EIM_DA12 = _MXC_BUILD_GPIO_PIN(2, 12, 1, 0x1CC, 0x51C), + MX53_PIN_EIM_DA13 = _MXC_BUILD_GPIO_PIN(2, 13, 1, 0x1D0, 0x520), + MX53_PIN_EIM_DA14 = _MXC_BUILD_GPIO_PIN(2, 14, 1, 0x1D4, 0x524), + MX53_PIN_EIM_DA15 = _MXC_BUILD_GPIO_PIN(2, 15, 1, 0x1D8, 0x528), + MX53_PIN_NANDF_WE_B = _MXC_BUILD_GPIO_PIN(5, 12, 1, 0x1DC, 0x52C), + MX53_PIN_NANDF_RE_B = _MXC_BUILD_GPIO_PIN(5, 13, 1, 0x1E0, 0x530), + MX53_PIN_EIM_WAIT = _MXC_BUILD_GPIO_PIN(4, 0, 1, 0x1E4, 0x534), + MX53_PIN_EIM_BCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x538), + MX53_PIN_NVCC_EIM7 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x53C), + MX53_PIN_LVDS1_TX3_P = _MXC_BUILD_GPIO_PIN(5, 22, 0, 0x1EC, NON_PAD_I), + MX53_PIN_LVDS1_TX2_P = _MXC_BUILD_GPIO_PIN(5, 24, 0, 0x1F0, NON_PAD_I), + MX53_PIN_LVDS1_CLK_P = _MXC_BUILD_GPIO_PIN(5, 26, 0, 0x1F4, NON_PAD_I), + MX53_PIN_LVDS1_TX1_P = _MXC_BUILD_GPIO_PIN(5, 28, 0, 0x1F8, NON_PAD_I), + MX53_PIN_LVDS1_TX0_P = _MXC_BUILD_GPIO_PIN(5, 30, 0, 0x1FC, NON_PAD_I), + MX53_PIN_LVDS0_TX3_P = _MXC_BUILD_GPIO_PIN(6, 22, 0, 0x200, NON_PAD_I), + MX53_PIN_LVDS0_CLK_P = _MXC_BUILD_GPIO_PIN(6, 24, 0, 0x204, NON_PAD_I), + MX53_PIN_LVDS0_TX2_P = _MXC_BUILD_GPIO_PIN(6, 26, 0, 0x208, NON_PAD_I), + MX53_PIN_LVDS0_TX1_P = _MXC_BUILD_GPIO_PIN(6, 28, 0, 0x20C, NON_PAD_I), + MX53_PIN_LVDS0_TX0_P = _MXC_BUILD_GPIO_PIN(6, 30, 0, 0x210, NON_PAD_I), + MX53_PIN_GPIO_10 = _MXC_BUILD_GPIO_PIN(3, 0, 0, 0x214, 0x540), + MX53_PIN_GPIO_11 = _MXC_BUILD_GPIO_PIN(3, 1, 0, 0x218, 0x544), + MX53_PIN_GPIO_12 = _MXC_BUILD_GPIO_PIN(3, 2, 0, 0x21C, 0x548), + MX53_PIN_GPIO_13 = _MXC_BUILD_GPIO_PIN(3, 3, 0, 0x220, 0x54C), + MX53_PIN_GPIO_14 = _MXC_BUILD_GPIO_PIN(3, 4, 0, 0x224, 0x550), + MX53_PIN_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x554), + MX53_PIN_DRAM_SDQS3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x558), + MX53_PIN_DRAM_SDCKE1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x55C), + MX53_PIN_DRAM_DQM2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x560), + MX53_PIN_DRAM_SDODT1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x564), + MX53_PIN_DRAM_SDQS2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x568), + MX53_PIN_DRAM_RESET = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x56C), + MX53_PIN_DRAM_SDCLK1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x570), + MX53_PIN_DRAM_CAS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x574), + MX53_PIN_DRAM_SDCLK0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x578), + MX53_PIN_DRAM_SDQS0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x57C), + MX53_PIN_DRAM_SDODT0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x580), + MX53_PIN_DRAM_DQM0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x584), + MX53_PIN_DRAM_RAS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x588), + MX53_PIN_DRAM_SDCKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x58C), + MX53_PIN_DRAM_SDQS1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x590), + MX53_PIN_DRAM_DQM1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x594), + MX53_PIN_PMIC_ON_REQ = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x598), + MX53_PIN_PMIC_STBY_REQ = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x59C), + MX53_PIN_NANDF_CLE = _MXC_BUILD_GPIO_PIN(5, 7, 1, 0x228, 0x5A0), + MX53_PIN_NANDF_ALE = _MXC_BUILD_GPIO_PIN(5, 8 , 1, 0x22C, 0x5A4), + MX53_PIN_NANDF_WP_B = _MXC_BUILD_GPIO_PIN(5, 9, 1, 0x230, 0x5A8), + MX53_PIN_NANDF_RB0 = _MXC_BUILD_GPIO_PIN(5, 10, 1, 0x234, 0x5AC), + MX53_PIN_NANDF_CS0 = _MXC_BUILD_GPIO_PIN(5, 11, 1, 0x238, 0x5B0), + MX53_PIN_NANDF_CS1 = _MXC_BUILD_GPIO_PIN(5, 14, 1, 0x23C, 0x5B4), + MX53_PIN_NANDF_CS2 = _MXC_BUILD_GPIO_PIN(5, 15, 1, 0x240, 0x5B8), + MX53_PIN_NANDF_CS3 = _MXC_BUILD_GPIO_PIN(5, 16, 1, 0x244, 0x5BC), + MX53_PIN_NVCC_NANDF = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5C0), + MX53_PIN_FEC_MDIO = _MXC_BUILD_GPIO_PIN(0, 22, 1, 0x248, 0x5C4), + MX53_PIN_FEC_REF_CLK = _MXC_BUILD_GPIO_PIN(0, 23, 1, 0x24C, 0x5C8), + MX53_PIN_FEC_RX_ER = _MXC_BUILD_GPIO_PIN(0, 24, 1, 0x250, 0x5CC), + MX53_PIN_FEC_CRS_DV = _MXC_BUILD_GPIO_PIN(0, 25, 1, 0x254, 0x5D0), + MX53_PIN_FEC_RXD1 = _MXC_BUILD_GPIO_PIN(0, 26, 1, 0x258, 0x5D4), + MX53_PIN_FEC_RXD0 = _MXC_BUILD_GPIO_PIN(0, 27, 1, 0x25C, 0x5D8), + MX53_PIN_FEC_TX_EN = _MXC_BUILD_GPIO_PIN(0, 28, 1, 0x260, 0x5DC), + MX53_PIN_FEC_TXD1 = _MXC_BUILD_GPIO_PIN(0, 29, 1, 0x264, 0x5E0), + MX53_PIN_FEC_TXD0 = _MXC_BUILD_GPIO_PIN(0, 30, 1, 0x268, 0x5E4), + MX53_PIN_FEC_MDC = _MXC_BUILD_GPIO_PIN(0, 31, 1, 0x26C, 0x5E8), + MX53_PIN_NVCC_FEC = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5EC), + MX53_PIN_ATA_DIOW = _MXC_BUILD_GPIO_PIN(5, 17, 1, 0x270, 0x5F0), + MX53_PIN_ATA_DMACK = _MXC_BUILD_GPIO_PIN(5, 18, 1, 0x274, 0x5F4), + MX53_PIN_ATA_DMARQ = _MXC_BUILD_GPIO_PIN(6, 0, 1, 0x278, 0x5F8), + MX53_PIN_ATA_BUFFER_EN = _MXC_BUILD_GPIO_PIN(6, 1, 1, 0x27C, 0x5FC), + MX53_PIN_ATA_INTRQ = _MXC_BUILD_GPIO_PIN(6, 2, 1, 0x280, 0x600), + MX53_PIN_ATA_DIOR = _MXC_BUILD_GPIO_PIN(6, 3, 1, 0x284, 0x604), + MX53_PIN_ATA_RESET_B = _MXC_BUILD_GPIO_PIN(6, 4, 1, 0x288, 0x608), + MX53_PIN_ATA_IORDY = _MXC_BUILD_GPIO_PIN(6, 5, 1, 0x28C, 0x60C), + MX53_PIN_ATA_DA_0 = _MXC_BUILD_GPIO_PIN(6, 6, 1, 0x290, 0x610), + MX53_PIN_ATA_DA_1 = _MXC_BUILD_GPIO_PIN(6, 7, 1, 0x294, 0x614), + MX53_PIN_ATA_DA_2 = _MXC_BUILD_GPIO_PIN(6, 8, 1, 0x298, 0x618), + MX53_PIN_ATA_CS_0 = _MXC_BUILD_GPIO_PIN(6, 9, 1, 0x29C, 0x61C), + MX53_PIN_ATA_CS_1 = _MXC_BUILD_GPIO_PIN(6, 10, 1, 0x2A0, 0x620), + MX53_PIN_NVCC_ATA2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x624), + MX53_PIN_ATA_DATA0 = _MXC_BUILD_GPIO_PIN(1, 0, 1, 0x2A4, 0x628), + MX53_PIN_ATA_DATA1 = _MXC_BUILD_GPIO_PIN(1, 1, 1, 0x2A8, 0x62C), + MX53_PIN_ATA_DATA2 = _MXC_BUILD_GPIO_PIN(1, 2, 1, 0x2AC, 0x630), + MX53_PIN_ATA_DATA3 = _MXC_BUILD_GPIO_PIN(1, 3, 1, 0x2B0, 0x634), + MX53_PIN_ATA_DATA4 = _MXC_BUILD_GPIO_PIN(1, 4, 1, 0x2B4, 0x638), + MX53_PIN_ATA_DATA5 = _MXC_BUILD_GPIO_PIN(1, 5, 1, 0x2B8, 0x63C), + MX53_PIN_ATA_DATA6 = _MXC_BUILD_GPIO_PIN(1, 6, 1, 0x2BC, 0x640), + MX53_PIN_ATA_DATA7 = _MXC_BUILD_GPIO_PIN(1, 7, 1, 0x2C0, 0x644), + MX53_PIN_ATA_DATA8 = _MXC_BUILD_GPIO_PIN(1, 8, 1, 0x2C4, 0x648), + MX53_PIN_ATA_DATA9 = _MXC_BUILD_GPIO_PIN(1, 9, 1, 0x2C8, 0x64C), + MX53_PIN_ATA_DATA10 = _MXC_BUILD_GPIO_PIN(1, 10, 1, 0x2CC, 0x650), + MX53_PIN_ATA_DATA11 = _MXC_BUILD_GPIO_PIN(1, 11, 1, 0x2D0, 0x654), + MX53_PIN_ATA_DATA12 = _MXC_BUILD_GPIO_PIN(1, 12, 1, 0x2D4, 0x658), + MX53_PIN_ATA_DATA13 = _MXC_BUILD_GPIO_PIN(1, 13, 1, 0x2D8, 0x65C), + MX53_PIN_ATA_DATA14 = _MXC_BUILD_GPIO_PIN(1, 14, 1, 0x2DC, 0x660), + MX53_PIN_ATA_DATA15 = _MXC_BUILD_GPIO_PIN(1, 15, 1, 0x2E0, 0x664), + MX53_PIN_NVCC_ATA0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x668), + MX53_PIN_SD1_DATA0 = _MXC_BUILD_GPIO_PIN(0, 16, 1, 0x2E4, 0x66C), + MX53_PIN_SD1_DATA1 = _MXC_BUILD_GPIO_PIN(0, 17, 1, 0x2E8, 0x670), + MX53_PIN_SD1_CMD = _MXC_BUILD_GPIO_PIN(0, 18, 1, 0x2EC, 0x674), + MX53_PIN_SD1_DATA2 = _MXC_BUILD_GPIO_PIN(0, 19, 1, 0x2F0, 0x678), + MX53_PIN_SD1_CLK = _MXC_BUILD_GPIO_PIN(0, 20, 1, 0x2F4, 0x67C), + MX53_PIN_SD1_DATA3 = _MXC_BUILD_GPIO_PIN(0, 21, 1, 0x2F8, 0x680), + MX53_PIN_NVCC_SD1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x684), + MX53_PIN_SD2_CLK = _MXC_BUILD_GPIO_PIN(0, 10, 1, 0x2FC, 0x688), + MX53_PIN_SD2_CMD = _MXC_BUILD_GPIO_PIN(0, 11, 1, 0x300, 0x68C), + MX53_PIN_SD2_DATA3 = _MXC_BUILD_GPIO_PIN(0, 12, 1, 0x304, 0x690), + MX53_PIN_SD2_DATA2 = _MXC_BUILD_GPIO_PIN(0, 13, 1, 0x308, 0x694), + MX53_PIN_SD2_DATA1 = _MXC_BUILD_GPIO_PIN(0, 14, 1, 0x30C, 0x698), + MX53_PIN_SD2_DATA0 = _MXC_BUILD_GPIO_PIN(0, 15, 1, 0x310, 0x69C), + MX53_PIN_NVCC_SD2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6A0), + MX53_PIN_GPIO_0 = _MXC_BUILD_GPIO_PIN(0, 0, 1, 0x314, 0x6A4), + MX53_PIN_GPIO_1 = _MXC_BUILD_GPIO_PIN(0, 1, 1, 0x318, 0x6A8), + MX53_PIN_GPIO_9 = _MXC_BUILD_GPIO_PIN(0, 9, 1, 0x31C, 0x6AC), + MX53_PIN_GPIO_3 = _MXC_BUILD_GPIO_PIN(0, 3, 1, 0x320, 0x6B0), + MX53_PIN_GPIO_6 = _MXC_BUILD_GPIO_PIN(0, 6, 1, 0x324, 0x6B4), + MX53_PIN_GPIO_2 = _MXC_BUILD_GPIO_PIN(0, 2, 1, 0x328, 0x6B8), + MX53_PIN_GPIO_4 = _MXC_BUILD_GPIO_PIN(0, 4, 1, 0x32C, 0x6BC), + MX53_PIN_GPIO_5 = _MXC_BUILD_GPIO_PIN(0, 5, 1, 0x330, 0x6C0), + MX53_PIN_GPIO_7 = _MXC_BUILD_GPIO_PIN(0, 7, 1, 0x334, 0x6C4), + MX53_PIN_GPIO_8 = _MXC_BUILD_GPIO_PIN(0, 8, 1, 0x338, 0x6C8), + MX53_PIN_GPIO_16 = _MXC_BUILD_GPIO_PIN(6, 11, 1, 0x33C, 0x6CC), + MX53_PIN_GPIO_17 = _MXC_BUILD_GPIO_PIN(6, 12, 1, 0x340, 0x6D0), + MX53_PIN_GPIO_18 = _MXC_BUILD_GPIO_PIN(6, 13, 1, 0x344, 0x6D4), + MX53_PIN_NVCC_GPIO = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6D8), + MX53_PIN_POR_B = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6DC), + MX53_PIN_BOOT_MODE1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E0), + MX53_PIN_RESET_IN_B = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E4), + MX53_PIN_BOOT_MODE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E8), + MX53_PIN_TEST_MODE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6EC), + MX53_PIN_GRP_ADDDS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6F0), + MX53_PIN_GRP_DDRMODE_CTL = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6F4), + MX53_PIN_GRP_DDRPKE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6FC), + MX53_PIN_GRP_DDRPK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x708), + MX53_PIN_GRP_TERM_CTL3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x70C), + MX53_PIN_GRP_DDRHYS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x710), + MX53_PIN_GRP_DDRMODE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x714), + MX53_PIN_GRP_B0DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x718), + MX53_PIN_GRP_B1DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x71C), + MX53_PIN_GRP_CTLDS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x720), + MX53_PIN_GRP_DDR_TYPE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x724), + MX53_PIN_GRP_B2DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x728), + MX53_PIN_GRP_B3DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x72C), +}; +/* various IOMUX input select register index */ +typedef enum iomux_input_select { + MX51_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0, + MX51_AUDMUX_P4_INPUT_DB_AMX_SELECT_I, + MX51_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT, + MX51_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT, + MX51_AUDMUX_P5_INPUT_DA_AMX_SELECT_INPUT, + MX51_AUDMUX_P5_INPUT_DB_AMX_SELECT_INPUT, + MX51_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT, + MX51_AUDMUX_P5_INPUT_RXFS_AMX_SELECT, + MX51_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT, + MX51_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT, + MX51_AUDMUX_P6_INPUT_DA_AMX_SELECT_INPUT, + MX51_AUDMUX_P6_INPUT_DB_AMX_SELECT_INPUT, + MX51_AUDMUX_P6_INPUT_RXCLK_AMX_SELECT_INPUT, + MX51_AUDMUX_P6_INPUT_RXFS_AMX_SELECT_INPUT, + MX51_AUDMUX_P6_INPUT_TXCLK_AMX_SELECT_INPUT, + MX51_AUDMUX_P6_INPUT_TXFS_AMX_SELECT_INPUT, + MX51_CCM_IPP_DI_CLK_SELECT_INPUT, + /* TO2 */ + MX51_CCM_IPP_DI1_CLK_SELECT_INPUT, + MX51_CCM_PLL1_BYPASS_CLK_SELECT_INPUT, + MX51_CCM_PLL2_BYPASS_CLK_SELECT_INPUT, + MX51_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, + MX51_CSPI_IPP_IND_MISO_SELECT_INPUT, + MX51_CSPI_IPP_IND_MOSI_SELECT_INPUT, + MX51_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, + MX51_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, + MX51_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, + MX51_DPLLIP1_L1T_TOG_EN_SELECT_INPUT, + /* TO2 */ + MX51_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, + MX51_ECSPI2_IPP_IND_SS_B_3_SELECT_INPUT, + MX51_EMI_IPP_IND_RDY_INT_SELECT_INPUT, + MX51_ESDHC3_IPP_DAT0_IN_SELECT_INPUT, + MX51_ESDHC3_IPP_DAT1_IN_SELECT_INPUT, + MX51_ESDHC3_IPP_DAT2_IN_SELECT_INPUT, + MX51_ESDHC3_IPP_DAT3_IN_SELECT_INPUT, + MX51_FEC_FEC_COL_SELECT_INPUT, + MX51_FEC_FEC_CRS_SELECT_INPUT, + MX51_FEC_FEC_MDI_SELECT_INPUT, + MX51_FEC_FEC_RDATA_0_SELECT_INPUT, + MX51_FEC_FEC_RDATA_1_SELECT_INPUT, + MX51_FEC_FEC_RDATA_2_SELECT_INPUT, + MX51_FEC_FEC_RDATA_3_SELECT_INPUT, + MX51_FEC_FEC_RX_CLK_SELECT_INPUT, + MX51_FEC_FEC_RX_DV_SELECT_INPUT, + MX51_FEC_FEC_RX_ER_SELECT_INPUT, + MX51_FEC_FEC_TX_CLK_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_1_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_2_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_3_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_5_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_6_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_7_SELECT_INPUT, + MX51_GPIO3_IPP_IND_G_IN_8_SELECT_INPUT, + /* TO2 */ + MX51_GPIO3_IPP_IND_G_IN_12_SELECT_INPUT, + MX51_HSC_MIPI_MIX_IPP_IND_SENS1_DATA_EN_SELECT_INPUT, + MX51_HSC_MIPI_MIX_IPP_IND_SENS2_DATA_EN_SELECT_INPUT, + /* TO2 */ + MX51_HSC_MIPI_MIX_PAR_VSYNC_SELECT_INPUT, + /* TO2 */ + MX51_HSC_MIPI_MIX_PAR_DI_WAIT_SELECT_INPUT, + MX51_HSC_MIPI_MIX_PAR_SISG_TRIG_SELECT_INPUT, + MX51_I2C1_IPP_SCL_IN_SELECT_INPUT, + MX51_I2C1_IPP_SDA_IN_SELECT_INPUT, + MX51_I2C2_IPP_SCL_IN_SELECT_INPUT, + MX51_I2C2_IPP_SDA_IN_SELECT_INPUT, + MX51_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT, + MX51_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT, + MX51_KPP_IPP_IND_COL_6_SELECT_INPUT, + MX51_KPP_IPP_IND_COL_7_SELECT_INPUT, + MX51_KPP_IPP_IND_ROW_4_SELECT_INPUT, + MX51_KPP_IPP_IND_ROW_5_SELECT_INPUT, + MX51_KPP_IPP_IND_ROW_6_SELECT_INPUT, + MX51_KPP_IPP_IND_ROW_7_SELECT_INPUT, + MX51_UART1_IPP_UART_RTS_B_SELECT_INPUT, + MX51_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, + MX51_UART2_IPP_UART_RTS_B_SELECT_INPUT, + MX51_UART2_IPP_UART_RXD_MUX_SELECT_INPUT, + MX51_UART3_IPP_UART_RTS_B_SELECT_INPUT, + MX51_UART3_IPP_UART_RXD_MUX_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_CLK_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_0_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_1_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_2_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_3_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_4_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_5_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_6_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DATA_7_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_DIR_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_NXT_SELECT_INPUT, + MX51_USBOH3_IPP_IND_UH3_STP_SELECT_INPUT, + MX51PUT_NUM_MUX, + /* MX53 */ + MX53_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0, + MX53_AUDMUX_P4_INPUT_DB_AMX_SELECT_I, + MX53_AUDMUX_P4_INPUT_RXCLK_AMX_SELECT_INPUT, + MX53_AUDMUX_P4_INPUT_RXFS_AMX_SELECT_INPUT, + MX53_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT, + MX53_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT, + MX53_AUDMUX_P5_INPUT_DA_AMX_SELECT_I, + MX53_AUDMUX_P5_INPUT_DB_AMX_SELECT_I, + MX53_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT, + MX53_AUDMUX_P5_INPUT_RXFS_AMX_SELECT_INPUT, + MX53_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT, + MX53_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT, + MX53_CAN1_IPP_IND_CANRX_SELECT_INPUT, + MX53_CAN2_IPP_IND_CANRX_SELECT_INPUT, + MX53_CCM_IPP_ASRC_EXT_SELECT_INPUT, + MX53_CCM_IPP_DI1_CLK_SELECT_INPUT, + MX53_CCM_PLL1_BYPASS_CLK_SELECT_INPUT, + MX53_CCM_PLL2_BYPASS_CLK_SELECT_INPUT, + MX53_CCM_PLL3_BYPASS_CLK_SELECT_INPUT, + MX53_CCM_PLL4_BYPASS_CLK_SELECT_INPUT, + MX53_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, + MX53_CSPI_IPP_IND_MISO_SELECT_INPUT, + MX53_CSPI_IPP_IND_MOSI_SELECT_INPUT, + MX53_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, + MX53_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, + MX53_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, + MX53_CSPI_IPP_IND_SS_B_4_SELECT_INPUT, + MX53_ECSPI1_IPP_CSPI_CLK_IN_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_MISO_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_MOSI_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_SS_B_1_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_SS_B_2_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_SS_B_3_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_SS_B_4_SELECT_INPUT, + MX53_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT, + MX53_ECSPI2_IPP_IND_MISO_SELECT_INPUT, + MX53_ECSPI2_IPP_IND_MOSI_SELECT_INPUT, + MX53_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, + MX53_ECSPI2_IPP_IND_SS_B_2_SELECT_INPUT, + MX53_ESAI1_IPP_IND_FSR_SELECT_INPUT, + MX53_ESAI1_IPP_IND_FST_SELECT_INPUT, + MX53_ESAI1_IPP_IND_HCKR_SELECT_INPUT, + MX53_ESAI1_IPP_IND_HCKT_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SCKR_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SCKT_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SDO0_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SDO1_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SDO2_SDI3_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SDO3_SDI2_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SDO4_SDI1_SELECT_INPUT, + MX53_ESAI1_IPP_IND_SDO5_SDI0_SELECT_INPUT, + MX53_ESDHC1_IPP_WP_ON_SELECT_INPUT, + MX53_FEC_FEC_COL_SELECT_INPUT, + MX53_FEC_FEC_MDI_SELECT_INPUT, + MX53_FEC_FEC_RX_CLK_SELECT_INPUT, + MX53_FIRI_IPP_IND_RXD_SELECT_INPUT, + MX53_GPC_PMIC_RDY_SELECT_INPUT, + MX53_I2C1_IPP_SCL_IN_SELECT_INPUT, + MX53_I2C1_IPP_SDA_IN_SELECT_INPUT, + MX53_I2C2_IPP_SCL_IN_SELECT_INPUT, + MX53_I2C2_IPP_SDA_IN_SELECT_INPUT, + MX53_I2C3_IPP_SCL_IN_SELECT_INPUT, + MX53_I2C3_IPP_SDA_IN_SELECT_INPUT, + MX53_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT, + MX53_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT, + MX53_IPU_IPP_IND_SENS1_DATA_EN_SELECT_INPUT, + MX53_IPU_IPP_IND_SENS1_HSYNC_SELECT_INPUT, + MX53_IPU_IPP_IND_SENS1_VSYNC_SELECT_INPUT, + MX53_KPP_IPP_IND_COL_5_SELECT_INPUT, + MX53_KPP_IPP_IND_COL_6_SELECT_INPUT, + MX53_KPP_IPP_IND_COL_7_SELECT_INPUT, + MX53_KPP_IPP_IND_ROW_5_SELECT_INPUT, + MX53_KPP_IPP_IND_ROW_6_SELECT_INPUT, + MX53_KPP_IPP_IND_ROW_7_SELECT_INPUT, + MX53_MLB_MLBCLK_IN_SELECT_INPUT, + MX53_MLB_MLBDAT_IN_SELECT_INPUT, + MX53_MLB_MLBSIG_IN_SELECT_INPUT, + MX53_OWIRE_BATTERY_LINE_IN_SELECT_INPUT, + MX53_SDMA_EVENTS_14_SELECT_INPUT, + MX53_SDMA_EVENTS_15_SELECT_INPUT, + MX53_SPDIF_SPDIF_IN1_SELECT_INPUT, + MX53_UART1_IPP_UART_RTS_B_SELECT_INPUT, + MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, + MX53_UART2_IPP_UART_RTS_B_SELECT_INPUT, + MX53_UART2_IPP_UART_RXD_MUX_SELECT_INPUT, + MX53_UART3_IPP_UART_RTS_B_SELECT_INPUT, + MX53_UART3_IPP_UART_RXD_MUX_SELECT_INPUT, + MX53_UART4_IPP_UART_RTS_B_SELECT_INPUT, + MX53_UART4_IPP_UART_RXD_MUX_SELECT_INPUT, + MX53_UART5_IPP_UART_RTS_B_SELECT_INPUT, + MX53_UART5_IPP_UART_RXD_MUX_SELECT_INPUT, + MX53_USBOH3_IPP_IND_OTG_OC_SELECT_INPUT, + MX53_USBOH3_IPP_IND_UH1_OC_SELECT_INPUT, + MX53_USBOH3_IPP_IND_UH2_OC_SELECT_INPUT, +} iomux_input_select_t; + #endif /* __ASSEMBLY__ */ #endif /* __ASM_ARCH_MX5_MX5X_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-s5pc1xx/clk.h b/arch/arm/include/asm/arch-s5pc1xx/clk.h index 3488eb7..4c389c1 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/clk.h +++ b/arch/arm/include/asm/arch-s5pc1xx/clk.h @@ -29,11 +29,9 @@ #define HPLL 3 #define VPLL 4 -void s5p_clock_init(void); - -extern unsigned long (*get_pll_clk)(int pllreg); -extern unsigned long (*get_arm_clk)(void); -extern unsigned long (*get_pwm_clk)(void); -extern unsigned long (*get_uart_clk)(int dev_index); +unsigned long get_pll_clk(int pllreg); +unsigned long get_arm_clk(void); +unsigned long get_pwm_clk(void); +unsigned long get_uart_clk(int dev_index); #endif diff --git a/arch/arm/include/asm/arch-s5pc1xx/uart.h b/arch/arm/include/asm/arch-s5pc1xx/uart.h index f6eeab4..1c56739 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/uart.h +++ b/arch/arm/include/asm/arch-s5pc1xx/uart.h @@ -48,7 +48,10 @@ struct s5p_uart { unsigned char res3[0x3d0]; }; -static int use_divslot = 1; +static inline int s5p_uart_divslot(void) +{ + return 1; +} #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/arch-s5pc2xx/adc.h b/arch/arm/include/asm/arch-s5pc2xx/adc.h new file mode 100644 index 0000000..c0aa580 --- /dev/null +++ b/arch/arm/include/asm/arch-s5pc2xx/adc.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_ADC_H_ +#define __ASM_ARM_ARCH_ADC_H_ + +#ifndef __ASSEMBLY__ +struct s5p_adc { + unsigned int adccon; + unsigned int adctsc; + unsigned int adcdly; + unsigned int adcdat0; + unsigned int adcdat1; + unsigned int adcupdn; + unsigned int adcclrint; + unsigned int adcmux; + unsigned int adcclrintpndnup; +}; +#endif + +#endif /* __ASM_ARM_ARCH_ADC_H_ */ diff --git a/arch/arm/include/asm/arch-s5pc2xx/clk.h b/arch/arm/include/asm/arch-s5pc2xx/clk.h new file mode 100644 index 0000000..5a1cdf1 --- /dev/null +++ b/arch/arm/include/asm/arch-s5pc2xx/clk.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2010 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARM_ARCH_CLK_H_ +#define __ASM_ARM_ARCH_CLK_H_ + +#define APLL 0 +#define MPLL 1 +#define EPLL 2 +#define HPLL 3 +#define VPLL 4 + +unsigned long get_pll_clk(int pllreg); +unsigned long get_arm_clk(void); +unsigned long get_pwm_clk(void); +unsigned long get_uart_clk(int dev_index); + +#endif diff --git a/arch/arm/include/asm/arch-s5pc2xx/clock.h b/arch/arm/include/asm/arch-s5pc2xx/clock.h new file mode 100644 index 0000000..0ff8cf8 --- /dev/null +++ b/arch/arm/include/asm/arch-s5pc2xx/clock.h @@ -0,0 +1,255 @@ +/* + * (C) Copyright 2010 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARM_ARCH_CLOCK_H_ +#define __ASM_ARM_ARCH_CLOCK_H_ + +#ifndef __ASSEMBLY__ +struct s5pc210_clock { + unsigned char res1[0x4200]; + unsigned int src_leftbus; + unsigned char res2[0x1fc]; + unsigned int mux_stat_leftbus; + unsigned char res4[0xfc]; + unsigned int div_leftbus; + unsigned char res5[0xfc]; + unsigned int div_stat_leftbus; + unsigned char res6[0x1fc]; + unsigned int gate_ip_leftbus; + unsigned char res7[0x1fc]; + unsigned int clkout_leftbus; + unsigned int clkout_leftbus_div_stat; + unsigned char res8[0x37f8]; + unsigned int src_rightbus; + unsigned char res9[0x1fc]; + unsigned int mux_stat_rightbus; + unsigned char res10[0xfc]; + unsigned int div_rightbus; + unsigned char res11[0xfc]; + unsigned int div_stat_rightbus; + unsigned char res12[0x1fc]; + unsigned int gate_ip_rightbus; + unsigned char res13[0x1fc]; + unsigned int clkout_rightbus; + unsigned int clkout_rightbus_div_stat; + unsigned char res14[0x3608]; + unsigned int epll_lock; + unsigned char res15[0xc]; + unsigned int vpll_lock; + unsigned char res16[0xec]; + unsigned int epll_con0; + unsigned int epll_con1; + unsigned char res17[0x8]; + unsigned int vpll_con0; + unsigned int vpll_con1; + unsigned char res18[0xe8]; + unsigned int src_top0; + unsigned int src_top1; + unsigned char res19[0x8]; + unsigned int src_cam; + unsigned int src_tv; + unsigned int src_mfc; + unsigned int src_g3d; + unsigned int src_image; + unsigned int src_lcd0; + unsigned int src_lcd1; + unsigned int src_maudio; + unsigned int src_fsys; + unsigned char res20[0xc]; + unsigned int src_peril0; + unsigned int src_peril1; + unsigned char res21[0xb8]; + unsigned int src_mask_top; + unsigned char res22[0xc]; + unsigned int src_mask_cam; + unsigned int src_mask_tv; + unsigned char res23[0xc]; + unsigned int src_mask_lcd0; + unsigned int src_mask_lcd1; + unsigned int src_mask_maudio; + unsigned int src_mask_fsys; + unsigned char res24[0xc]; + unsigned int src_mask_peril0; + unsigned int src_mask_peril1; + unsigned char res25[0xb8]; + unsigned int mux_stat_top; + unsigned char res26[0x14]; + unsigned int mux_stat_mfc; + unsigned int mux_stat_g3d; + unsigned int mux_stat_image; + unsigned char res27[0xdc]; + unsigned int div_top; + unsigned char res28[0xc]; + unsigned int div_cam; + unsigned int div_tv; + unsigned int div_mfc; + unsigned int div_g3d; + unsigned int div_image; + unsigned int div_lcd0; + unsigned int div_lcd1; + unsigned int div_maudio; + unsigned int div_fsys0; + unsigned int div_fsys1; + unsigned int div_fsys2; + unsigned int div_fsys3; + unsigned int div_peril0; + unsigned int div_peril1; + unsigned int div_peril2; + unsigned int div_peril3; + unsigned int div_peril4; + unsigned int div_peril5; + unsigned char res29[0x18]; + unsigned int div2_ratio; + unsigned char res30[0x8c]; + unsigned int div_stat_top; + unsigned char res31[0xc]; + unsigned int div_stat_cam; + unsigned int div_stat_tv; + unsigned int div_stat_mfc; + unsigned int div_stat_g3d; + unsigned int div_stat_image; + unsigned int div_stat_lcd0; + unsigned int div_stat_lcd1; + unsigned int div_stat_maudio; + unsigned int div_stat_fsys0; + unsigned int div_stat_fsys1; + unsigned int div_stat_fsys2; + unsigned int div_stat_fsys3; + unsigned int div_stat_peril0; + unsigned int div_stat_peril1; + unsigned int div_stat_peril2; + unsigned int div_stat_peril3; + unsigned int div_stat_peril4; + unsigned int div_stat_peril5; + unsigned char res32[0x18]; + unsigned int div2_stat; + unsigned char res33[0x29c]; + unsigned int gate_ip_cam; + unsigned int gate_ip_tv; + unsigned int gate_ip_mfc; + unsigned int gate_ip_g3d; + unsigned int gate_ip_image; + unsigned int gate_ip_lcd0; + unsigned int gate_ip_lcd1; + unsigned char res34[0x4]; + unsigned int gate_ip_fsys; + unsigned char res35[0x8]; + unsigned int gate_ip_gps; + unsigned int gate_ip_peril; + unsigned char res36[0xc]; + unsigned int gate_ip_perir; + unsigned char res37[0xc]; + unsigned int gate_block; + unsigned char res38[0x8c]; + unsigned int clkout_cmu_top; + unsigned int clkout_cmu_top_div_stat; + unsigned char res39[0x37f8]; + unsigned int src_dmc; + unsigned char res40[0xfc]; + unsigned int src_mask_dmc; + unsigned char res41[0xfc]; + unsigned int mux_stat_dmc; + unsigned char res42[0xfc]; + unsigned int div_dmc0; + unsigned int div_dmc1; + unsigned char res43[0xf8]; + unsigned int div_stat_dmc0; + unsigned int div_stat_dmc1; + unsigned char res44[0x2f8]; + unsigned int gate_ip_dmc; + unsigned char res45[0xfc]; + unsigned int clkout_cmu_dmc; + unsigned int clkout_cmu_dmc_div_stat; + unsigned char res46[0x5f8]; + unsigned int dcgidx_map0; + unsigned int dcgidx_map1; + unsigned int dcgidx_map2; + unsigned char res47[0x14]; + unsigned int dcgperf_map0; + unsigned int dcgperf_map1; + unsigned char res48[0x18]; + unsigned int dvcidx_map; + unsigned char res49[0x1c]; + unsigned int freq_cpu; + unsigned int freq_dpm; + unsigned char res50[0x18]; + unsigned int dvsemclk_en; + unsigned int maxperf; + unsigned char res51[0x2f78]; + unsigned int apll_lock; + unsigned char res52[0x4]; + unsigned int mpll_lock; + unsigned char res53[0xf4]; + unsigned int apll_con0; + unsigned int apll_con1; + unsigned int mpll_con0; + unsigned int mpll_con1; + unsigned char res54[0xf0]; + unsigned int src_cpu; + unsigned char res55[0x1fc]; + unsigned int mux_stat_cpu; + unsigned char res56[0xfc]; + unsigned int div_cpu0; + unsigned int div_cpu1; + unsigned char res57[0xf8]; + unsigned int div_stat_cpu0; + unsigned int div_stat_cpu1; + unsigned char res58[0x3f8]; + unsigned int clkout_cmu_cpu; + unsigned int clkout_cmu_cpu_div_stat; + unsigned char res59[0x5f8]; + unsigned int armclk_stopctrl; + unsigned int atclk_stopctrl; + unsigned char res60[0x8]; + unsigned int parityfail_status; + unsigned int parityfail_clear; + unsigned char res61[0xe8]; + unsigned int apll_con0_l8; + unsigned int apll_con0_l7; + unsigned int apll_con0_l6; + unsigned int apll_con0_l5; + unsigned int apll_con0_l4; + unsigned int apll_con0_l3; + unsigned int apll_con0_l2; + unsigned int apll_con0_l1; + unsigned int iem_control; + unsigned char res62[0xdc]; + unsigned int apll_con1_l8; + unsigned int apll_con1_l7; + unsigned int apll_con1_l6; + unsigned int apll_con1_l5; + unsigned int apll_con1_l4; + unsigned int apll_con1_l3; + unsigned int apll_con1_l2; + unsigned int apll_con1_l1; + unsigned char res63[0xe0]; + unsigned int div_iem_l8; + unsigned int div_iem_l7; + unsigned int div_iem_l6; + unsigned int div_iem_l5; + unsigned int div_iem_l4; + unsigned int div_iem_l3; + unsigned int div_iem_l2; + unsigned int div_iem_l1; +}; +#endif + +#endif diff --git a/arch/arm/include/asm/arch-s5pc2xx/cpu.h b/arch/arm/include/asm/arch-s5pc2xx/cpu.h new file mode 100644 index 0000000..d56ee80 --- /dev/null +++ b/arch/arm/include/asm/arch-s5pc2xx/cpu.h @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2010 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef _S5PC2XX_CPU_H +#define _S5PC2XX_CPU_H + +#define S5PC2XX_ADDR_BASE 0x10000000 + +/* S5PC210 */ +#define S5PC210_GPIO_PART3_BASE 0x03860000 +#define S5PC210_PRO_ID 0x10000000 +#define S5PC210_POWER_BASE 0x10020000 +#define S5PC210_SWRESET 0x10020400 +#define S5PC210_CLOCK_BASE 0x10030000 +#define S5PC210_SYSTIMER_BASE 0x10050000 +#define S5PC210_WATCHDOG_BASE 0x10060000 +#define S5PC210_MIU_BASE 0x10600000 +#define S5PC210_DMC0_BASE 0x10400000 +#define S5PC210_DMC1_BASE 0x10410000 +#define S5PC210_GPIO_PART2_BASE 0x11000000 +#define S5PC210_GPIO_PART1_BASE 0x11400000 +#define S5PC210_FIMD_BASE 0x11C00000 +#define S5PC210_USBOTG_BASE 0x12480000 +#define S5PC210_MMC_BASE 0x12510000 +#define S5PC210_SROMC_BASE 0x12570000 +#define S5PC210_USBPHY_BASE 0x125B0000 +#define S5PC210_UART_BASE 0x13800000 +#define S5PC210_ADC_BASE 0x13910000 +#define S5PC210_PWMTIMER_BASE 0x139D0000 +#define S5PC210_MODEM_BASE 0x13A00000 + +#ifndef __ASSEMBLY__ +#include <asm/io.h> +/* CPU detection macros */ +extern unsigned int s5p_cpu_id; + +static inline void s5p_set_cpu_id(void) +{ + s5p_cpu_id = readl(S5PC210_PRO_ID); + s5p_cpu_id = (0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12)); + + /* + * 0xC200: S5PC210 EVT0 + * 0xC210: S5PC210 EVT1 + */ + if (s5p_cpu_id == 0xC200) + s5p_cpu_id |= 0x10; +} + +#define IS_SAMSUNG_TYPE(type, id) \ +static inline int cpu_is_##type(void) \ +{ \ + return s5p_cpu_id == id ? 1 : 0; \ +} + +IS_SAMSUNG_TYPE(s5pc210, 0xc210) + +#define SAMSUNG_BASE(device, base) \ +static inline unsigned int samsung_get_base_##device(void) \ +{ \ + if (cpu_is_s5pc210()) \ + return S5PC210_##base; \ + else \ + return 0; \ +} + +SAMSUNG_BASE(adc, ADC_BASE) +SAMSUNG_BASE(clock, CLOCK_BASE) +SAMSUNG_BASE(fimd, FIMD_BASE) +SAMSUNG_BASE(gpio_part1, GPIO_PART1_BASE) +SAMSUNG_BASE(gpio_part2, GPIO_PART2_BASE) +SAMSUNG_BASE(gpio_part3, GPIO_PART3_BASE) +SAMSUNG_BASE(pro_id, PRO_ID) +SAMSUNG_BASE(mmc, MMC_BASE) +SAMSUNG_BASE(modem, MODEM_BASE) +SAMSUNG_BASE(sromc, SROMC_BASE) +SAMSUNG_BASE(swreset, SWRESET) +SAMSUNG_BASE(timer, PWMTIMER_BASE) +SAMSUNG_BASE(uart, UART_BASE) +SAMSUNG_BASE(usb_phy, USBPHY_BASE) +SAMSUNG_BASE(usb_otg, USBOTG_BASE) +SAMSUNG_BASE(watchdog, WATCHDOG_BASE) +#endif + +#endif /* _S5PC2XX_CPU_H */ diff --git a/arch/arm/include/asm/arch-s5pc2xx/gpio.h b/arch/arm/include/asm/arch-s5pc2xx/gpio.h new file mode 100644 index 0000000..05e5b3e --- /dev/null +++ b/arch/arm/include/asm/arch-s5pc2xx/gpio.h @@ -0,0 +1,112 @@ +/* + * (C) Copyright 2010 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H + +#ifndef __ASSEMBLY__ +struct s5p_gpio_bank { + unsigned int con; + unsigned int dat; + unsigned int pull; + unsigned int drv; + unsigned int pdn_con; + unsigned int pdn_pull; + unsigned char res1[8]; +}; + +struct s5pc210_gpio_part1 { + struct s5p_gpio_bank a0; + struct s5p_gpio_bank a1; + struct s5p_gpio_bank b; + struct s5p_gpio_bank c0; + struct s5p_gpio_bank c1; + struct s5p_gpio_bank d0; + struct s5p_gpio_bank d1; + struct s5p_gpio_bank e0; + struct s5p_gpio_bank e1; + struct s5p_gpio_bank e2; + struct s5p_gpio_bank e3; + struct s5p_gpio_bank e4; + struct s5p_gpio_bank f0; + struct s5p_gpio_bank f1; + struct s5p_gpio_bank f2; + struct s5p_gpio_bank f3; +}; + +struct s5pc210_gpio_part2 { + struct s5p_gpio_bank j0; + struct s5p_gpio_bank j1; + struct s5p_gpio_bank k0; + struct s5p_gpio_bank k1; + struct s5p_gpio_bank k2; + struct s5p_gpio_bank k3; + struct s5p_gpio_bank l0; + struct s5p_gpio_bank l1; + struct s5p_gpio_bank l2; + struct s5p_gpio_bank y0; + struct s5p_gpio_bank y1; + struct s5p_gpio_bank y2; + struct s5p_gpio_bank y3; + struct s5p_gpio_bank y4; + struct s5p_gpio_bank y5; + struct s5p_gpio_bank y6; + struct s5p_gpio_bank res1[80]; + struct s5p_gpio_bank x0; + struct s5p_gpio_bank x1; + struct s5p_gpio_bank x2; + struct s5p_gpio_bank x3; +}; + +struct s5pc210_gpio_part3 { + struct s5p_gpio_bank z; +}; + +/* functions */ +void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg); +void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en); +void gpio_direction_input(struct s5p_gpio_bank *bank, int gpio); +void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en); +unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio); +void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode); +void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode); +void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); +#endif + +/* Pin configurations */ +#define GPIO_INPUT 0x0 +#define GPIO_OUTPUT 0x1 +#define GPIO_IRQ 0xf +#define GPIO_FUNC(x) (x) + +/* Pull mode */ +#define GPIO_PULL_NONE 0x0 +#define GPIO_PULL_DOWN 0x1 +#define GPIO_PULL_UP 0x2 + +/* Drive Strength level */ +#define GPIO_DRV_1X 0x0 +#define GPIO_DRV_2X 0x1 +#define GPIO_DRV_3X 0x2 +#define GPIO_DRV_4X 0x3 +#define GPIO_DRV_FAST 0x0 +#define GPIO_DRV_SLOW 0x1 + +#endif diff --git a/arch/arm/include/asm/arch-s5pc2xx/mmc.h b/arch/arm/include/asm/arch-s5pc2xx/mmc.h new file mode 100644 index 0000000..528150d --- /dev/null +++ b/arch/arm/include/asm/arch-s5pc2xx/mmc.h @@ -0,0 +1,71 @@ +/* + * (C) Copyright 2009 SAMSUNG Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_MMC_H_ +#define __ASM_ARCH_MMC_H_ + +#ifndef __ASSEMBLY__ +struct s5p_mmc { + unsigned int sysad; + unsigned short blksize; + unsigned short blkcnt; + unsigned int argument; + unsigned short trnmod; + unsigned short cmdreg; + unsigned int rspreg0; + unsigned int rspreg1; + unsigned int rspreg2; + unsigned int rspreg3; + unsigned int bdata; + unsigned int prnsts; + unsigned char hostctl; + unsigned char pwrcon; + unsigned char blkgap; + unsigned char wakcon; + unsigned short clkcon; + unsigned char timeoutcon; + unsigned char swrst; + unsigned int norintsts; /* errintsts */ + unsigned int norintstsen; /* errintstsen */ + unsigned int norintsigen; /* errintsigen */ + unsigned short acmd12errsts; + unsigned char res1[2]; + unsigned int capareg; + unsigned char res2[4]; + unsigned int maxcurr; + unsigned char res3[0x34]; + unsigned int control2; + unsigned int control3; + unsigned int control4; + unsigned char res4[0x6e]; + unsigned short hcver; + unsigned char res5[0xFF02]; +}; + +struct mmc_host { + struct s5p_mmc *reg; + unsigned int version; /* SDHCI spec. version */ + unsigned int clock; /* Current clock (MHz) */ +}; + +int s5p_mmc_init(int dev_index, int bus_width); + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arm/include/asm/arch-s5pc2xx/pwm.h b/arch/arm/include/asm/arch-s5pc2xx/pwm.h new file mode 100644 index 0000000..0369968 --- /dev/null +++ b/arch/arm/include/asm/arch-s5pc2xx/pwm.h @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_PWM_H_ +#define __ASM_ARM_ARCH_PWM_H_ + +/* Interval mode(Auto Reload) of PWM Timer 4 */ +#define TCON4_AUTO_RELOAD (1 << 22) +/* Update TCNTB4 */ +#define TCON4_UPDATE (1 << 21) +/* start bit of PWM Timer 4 */ +#define TCON4_START (1 << 20) + +#ifndef __ASSEMBLY__ +struct s5p_timer { + unsigned int tcfg0; + unsigned int tcfg1; + unsigned int tcon; + unsigned int tcntb0; + unsigned int tcmpb0; + unsigned int tcnto0; + unsigned int tcntb1; + unsigned int tcmpb1; + unsigned int tcnto1; + unsigned int tcntb2; + unsigned int tcmpb2; + unsigned int tcnto2; + unsigned int tcntb3; + unsigned int res1; + unsigned int tcnto3; + unsigned int tcntb4; + unsigned int tcnto4; + unsigned int tintcstat; +}; +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/arm/include/asm/arch-s5pc2xx/sys_proto.h b/arch/arm/include/asm/arch-s5pc2xx/sys_proto.h new file mode 100644 index 0000000..11f1636 --- /dev/null +++ b/arch/arm/include/asm/arch-s5pc2xx/sys_proto.h @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2010 Samsung Electrnoics + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +u32 get_device_type(void); +void invalidate_dcache(u32); +void l2_cache_disable(void); +void l2_cache_enable(void); + +#endif diff --git a/arch/arm/include/asm/arch-s5pc2xx/uart.h b/arch/arm/include/asm/arch-s5pc2xx/uart.h new file mode 100644 index 0000000..6cc68df --- /dev/null +++ b/arch/arm/include/asm/arch-s5pc2xx/uart.h @@ -0,0 +1,58 @@ +/* + * (C) Copyright 2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * Heungjun Kim <riverful.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_UART_H_ +#define __ASM_ARCH_UART_H_ + +#ifndef __ASSEMBLY__ +/* baudrate rest value */ +union br_rest { + unsigned short slot; /* udivslot */ + unsigned char value; /* ufracval */ +}; + +struct s5p_uart { + unsigned int ulcon; + unsigned int ucon; + unsigned int ufcon; + unsigned int umcon; + unsigned int utrstat; + unsigned int uerstat; + unsigned int ufstat; + unsigned int umstat; + unsigned char utxh; + unsigned char res1[3]; + unsigned char urxh; + unsigned char res2[3]; + unsigned int ubrdiv; + union br_rest rest; + unsigned char res3[0xffd0]; +}; + +static inline int s5p_uart_divslot(void) +{ + return 0; +} + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index ff1518e..3886f15 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -117,21 +117,29 @@ extern inline void __raw_readsl(unsigned int addr, void *data, int longlen) *buf++ = __arch_getl(addr); } -#define __raw_writeb(v,a) __arch_putb(v,a) -#define __raw_writew(v,a) __arch_putw(v,a) -#define __raw_writel(v,a) __arch_putl(v,a) +#define __raw_writeb(v,a) __arch_putb(v,a) +#define __raw_writew(v,a) __arch_putw(v,a) +#define __raw_writel(v,a) __arch_putl(v,a) -#define __raw_readb(a) __arch_getb(a) -#define __raw_readw(a) __arch_getw(a) -#define __raw_readl(a) __arch_getl(a) +#define __raw_readb(a) __arch_getb(a) +#define __raw_readw(a) __arch_getw(a) +#define __raw_readl(a) __arch_getl(a) -#define writeb(v,a) __arch_putb(v,a) -#define writew(v,a) __arch_putw(v,a) -#define writel(v,a) __arch_putl(v,a) +/* + * TODO: The kernel offers some more advanced versions of barriers, it might + * have some advantages to use them instead of the simple one here. + */ +#define dmb() __asm__ __volatile__ ("" : : : "memory") +#define __iormb() dmb() +#define __iowmb() dmb() + +#define writeb(v,c) ({ __iowmb(); __arch_putb(v,c); v; }) +#define writew(v,c) ({ __iowmb(); __arch_putw(v,c); v; }) +#define writel(v,c) ({ __iowmb(); __arch_putl(v,c); v; }) -#define readb(a) __arch_getb(a) -#define readw(a) __arch_getw(a) -#define readl(a) __arch_getl(a) +#define readb(c) ({ u8 __v = __arch_getb(c); __iormb(); __v; }) +#define readw(c) ({ u16 __v = __arch_getw(c); __iormb(); __v; }) +#define readl(c) ({ u32 __v = __arch_getl(c); __iormb(); __v; }) /* * The compiler seems to be incapable of optimising constants diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index 8b0208a..d95e6d67 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -2317,7 +2317,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_U380 2333 #define MACH_TYPE_HUALU_BOARD 2334 #define MACH_TYPE_NPCMX50 2335 -#define MACH_TYPE_MX51_LANGE51 2336 +#define MACH_TYPE_MX51_EFIKAMX 2336 #define MACH_TYPE_MX51_LANGE52 2337 #define MACH_TYPE_RIOM 2338 #define MACH_TYPE_COMCAS 2339 @@ -2351,7 +2351,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_CSB732 2367 #define MACH_TYPE_U8500 2368 #define MACH_TYPE_HUQIU 2369 -#define MACH_TYPE_MX51_KUNLUN 2370 +#define MACH_TYPE_MX51_EFIKASB 2370 #define MACH_TYPE_PMT1G 2371 #define MACH_TYPE_HTCELF 2372 #define MACH_TYPE_ARMADILLO420 2373 @@ -2967,7 +2967,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_WASABI 2986 #define MACH_TYPE_VIVOW 2987 #define MACH_TYPE_MX50_RDP 2988 -#define MACH_TYPE_UNIVERSAL 2989 +#define MACH_TYPE_UNIVERSAL_C210 2989 #define MACH_TYPE_REAL6410 2990 #define MACH_TYPE_SPX_SAKURA 2991 #define MACH_TYPE_IJ3K_2440 2992 @@ -3040,6 +3040,181 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_MSM8X60_QRDC 3060 #define MACH_TYPE_SPEAR900 3061 #define MACH_TYPE_PCONTROL_G20 3062 +#define MACH_TYPE_RDSTOR 3063 +#define MACH_TYPE_USDLOADER 3064 +#define MACH_TYPE_TSOPLOADER 3065 +#define MACH_TYPE_KRONOS 3066 +#define MACH_TYPE_FFCORE 3067 +#define MACH_TYPE_MONE 3068 +#define MACH_TYPE_UNIT2S 3069 +#define MACH_TYPE_ACER_A5 3070 +#define MACH_TYPE_ETHERPRO_ISP 3071 +#define MACH_TYPE_STRETCHS7000 3072 +#define MACH_TYPE_P87_SMARTSIM 3073 +#define MACH_TYPE_TULIP 3074 +#define MACH_TYPE_SUNFLOWER 3075 +#define MACH_TYPE_RIB 3076 +#define MACH_TYPE_CLOD 3077 +#define MACH_TYPE_RUMP 3078 +#define MACH_TYPE_TENDERLOIN 3079 +#define MACH_TYPE_SHORTLOIN 3080 +#define MACH_TYPE_CRESPO 3081 +#define MACH_TYPE_ANTARES 3082 +#define MACH_TYPE_WB40N 3083 +#define MACH_TYPE_HERRING 3084 +#define MACH_TYPE_NAXY400 3085 +#define MACH_TYPE_NAXY1200 3086 +#define MACH_TYPE_VPR200 3087 +#define MACH_TYPE_BUG20 3088 +#define MACH_TYPE_GOFLEXNET 3089 +#define MACH_TYPE_TORBRECK 3090 +#define MACH_TYPE_SAARB_MG1 3091 +#define MACH_TYPE_CALLISTO 3092 +#define MACH_TYPE_MULTHSU 3093 +#define MACH_TYPE_SALUDA 3094 +#define MACH_TYPE_PEMP_OMAP3_APOLLO 3095 +#define MACH_TYPE_VC0718 3096 +#define MACH_TYPE_MVBLX 3097 +#define MACH_TYPE_INHAND_APEIRON 3098 +#define MACH_TYPE_INHAND_FURY 3099 +#define MACH_TYPE_INHAND_SIREN 3100 +#define MACH_TYPE_HDNVP 3101 +#define MACH_TYPE_SOFTWINNER 3102 +#define MACH_TYPE_PRIMA2_EVB 3103 +#define MACH_TYPE_NAS6210 3104 +#define MACH_TYPE_UNISDEV 3105 +#define MACH_TYPE_SBCA11 3106 +#define MACH_TYPE_SAGA 3107 +#define MACH_TYPE_NS_K330 3108 +#define MACH_TYPE_TANNA 3109 +#define MACH_TYPE_IMATE8502 3110 +#define MACH_TYPE_ASPEN 3111 +#define MACH_TYPE_DAINTREE_CWAC 3112 +#define MACH_TYPE_ZMX25 3113 +#define MACH_TYPE_MAPLE1 3114 +#define MACH_TYPE_QSD8X72_SURF 3115 +#define MACH_TYPE_QSD8X72_FFA 3116 +#define MACH_TYPE_ABILENE 3117 +#define MACH_TYPE_EIGEN_TTR 3118 +#define MACH_TYPE_IOMEGA_IX2_200 3119 +#define MACH_TYPE_CORETEC_VCX7400 3120 +#define MACH_TYPE_SANTIAGO 3121 +#define MACH_TYPE_MX257SOL 3122 +#define MACH_TYPE_STRASBOURG 3123 +#define MACH_TYPE_MSM8X60_FLUID 3124 +#define MACH_TYPE_SMARTQV5 3125 +#define MACH_TYPE_SMARTQV3 3126 +#define MACH_TYPE_SMARTQV7 3127 +#define MACH_TYPE_PAZ00 3128 +#define MACH_TYPE_ACMENETUSFOXG20 3129 +#define MACH_TYPE_HTCWILLOW 3130 +#define MACH_TYPE_FWBD_0404 3131 +#define MACH_TYPE_HDGU 3132 +#define MACH_TYPE_PYRAMID 3133 +#define MACH_TYPE_EPIPHAN 3134 +#define MACH_TYPE_OMAP_BENDER 3135 +#define MACH_TYPE_GURNARD 3136 +#define MACH_TYPE_GTL_IT5100 3137 +#define MACH_TYPE_BCM2708 3138 +#define MACH_TYPE_MX51_GGC 3139 +#define MACH_TYPE_SHARESPACE 3140 +#define MACH_TYPE_HABA_KNX_EXPLORER 3141 +#define MACH_TYPE_SIMTEC_KIRKMOD 3142 +#define MACH_TYPE_CRUX 3143 +#define MACH_TYPE_MX51_BRAVO 3144 +#define MACH_TYPE_CHARON 3145 +#define MACH_TYPE_PICOCOM3 3146 +#define MACH_TYPE_PICOCOM4 3147 +#define MACH_TYPE_SERRANO 3148 +#define MACH_TYPE_DOUBLESHOT 3149 +#define MACH_TYPE_EVSY 3150 +#define MACH_TYPE_HUASHAN 3151 +#define MACH_TYPE_LAUSANNE 3152 +#define MACH_TYPE_EMERALD 3153 +#define MACH_TYPE_TQMA35 3154 +#define MACH_TYPE_MARVEL 3155 +#define MACH_TYPE_MANUAE 3156 +#define MACH_TYPE_CHACHA 3157 +#define MACH_TYPE_LEMON 3158 +#define MACH_TYPE_CSC 3159 +#define MACH_TYPE_GIRA_KNXIP_ROUTER 3160 +#define MACH_TYPE_T20 3161 +#define MACH_TYPE_HDMINI 3162 +#define MACH_TYPE_SCIPHONE_G2 3163 +#define MACH_TYPE_EXPRESS 3164 +#define MACH_TYPE_EXPRESS_KT 3165 +#define MACH_TYPE_MAXIMASP 3166 +#define MACH_TYPE_NITROGEN_IMX51 3167 +#define MACH_TYPE_NITROGEN_IMX53 3168 +#define MACH_TYPE_SUNFIRE 3169 +#define MACH_TYPE_AROWANA 3170 +#define MACH_TYPE_TEGRA_DAYTONA 3171 +#define MACH_TYPE_TEGRA_SWORDFISH 3172 +#define MACH_TYPE_EDISON 3173 +#define MACH_TYPE_SVP8500V1 3174 +#define MACH_TYPE_SVP8500V2 3175 +#define MACH_TYPE_SVP5500 3176 +#define MACH_TYPE_B5500 3177 +#define MACH_TYPE_S5500 3178 +#define MACH_TYPE_ICON 3179 +#define MACH_TYPE_ELEPHANT 3180 +#define MACH_TYPE_MSM8X60_FUSION 3181 +#define MACH_TYPE_SHOOTER 3182 +#define MACH_TYPE_SPADE_LTE 3183 +#define MACH_TYPE_PHILHWANI 3184 +#define MACH_TYPE_GSNCOMM 3185 +#define MACH_TYPE_STRASBOURG_A2 3186 +#define MACH_TYPE_MMM 3187 +#define MACH_TYPE_DAVINCI_DM365_BV 3188 +#define MACH_TYPE_AG5EVM 3189 +#define MACH_TYPE_SC575PLC 3190 +#define MACH_TYPE_SC575IPC 3191 +#define MACH_TYPE_OMAP3_TDM3730 3192 +#define MACH_TYPE_G7 3193 +#define MACH_TYPE_TOP9000_EVAL 3194 +#define MACH_TYPE_TOP9000_SU 3195 +#define MACH_TYPE_UTM300 3196 +#define MACH_TYPE_TSUNAGI 3197 +#define MACH_TYPE_TS75XX 3198 +#define MACH_TYPE_MSM8X60_FUSN_FFA 3199 +#define MACH_TYPE_TS47XX 3200 +#define MACH_TYPE_DA850_K5 3201 +#define MACH_TYPE_AX502 3202 +#define MACH_TYPE_IGEP0032 3203 +#define MACH_TYPE_ANTERO 3204 +#define MACH_TYPE_SYNERGY 3205 +#define MACH_TYPE_ICS_IF_VOIP 3206 +#define MACH_TYPE_WLF_CRAGG_6410 3207 +#define MACH_TYPE_PUNICA 3208 +#define MACH_TYPE_SBC_NT250 3209 +#define MACH_TYPE_MX27_WMULTRA 3210 +#define MACH_TYPE_MACKEREL 3211 +#define MACH_TYPE_FA9X27 3213 +#define MACH_TYPE_NS2816TB 3214 +#define MACH_TYPE_NS2816_NTPAD 3215 +#define MACH_TYPE_NS2816_NTNB 3216 +#define MACH_TYPE_KAEN 3217 +#define MACH_TYPE_NV1000 3218 +#define MACH_TYPE_NUC950TS 3219 +#define MACH_TYPE_NOKIA_RM680 3220 +#define MACH_TYPE_AST2200 3221 +#define MACH_TYPE_LEAD 3222 +#define MACH_TYPE_UNINO1 3223 +#define MACH_TYPE_GREECO 3224 +#define MACH_TYPE_VERDI 3225 +#define MACH_TYPE_DM6446_ADBOX 3226 +#define MACH_TYPE_QUAD_SALSA 3227 +#define MACH_TYPE_ABB_GMA_1_1 3228 +#define MACH_TYPE_SVCID 3229 +#define MACH_TYPE_MSM8960_SIM 3230 +#define MACH_TYPE_MSM8960_RUMI3 3231 +#define MACH_TYPE_ICON_G 3232 +#define MACH_TYPE_MB3 3233 +#define MACH_TYPE_GSIA18S 3234 +#define MACH_TYPE_PIVICC 3235 +#define MACH_TYPE_PCM048 3236 +#define MACH_TYPE_DDS 3237 +#define MACH_TYPE_CHALTEN_XA1 3238 #ifdef CONFIG_ARCH_EBSA110 # ifdef machine_arch_type @@ -30701,16 +30876,16 @@ extern unsigned int __machine_arch_type; # define machine_is_npcmx50() (0) #endif -#ifdef CONFIG_MACH_MX51_LANGE51 +#ifdef CONFIG_MACH_MX51_EFIKAMX # ifdef machine_arch_type # undef machine_arch_type # define machine_arch_type __machine_arch_type # else -# define machine_arch_type MACH_TYPE_MX51_LANGE51 +# define machine_arch_type MACH_TYPE_MX51_EFIKAMX # endif -# define machine_is_mx51_lange51() (machine_arch_type == MACH_TYPE_MX51_LANGE51) +# define machine_is_mx51_efikamx() (machine_arch_type == MACH_TYPE_MX51_EFIKAMX) #else -# define machine_is_mx51_lange51() (0) +# define machine_is_mx51_efikamx() (0) #endif #ifdef CONFIG_MACH_MX51_LANGE52 @@ -31109,16 +31284,16 @@ extern unsigned int __machine_arch_type; # define machine_is_huqiu() (0) #endif -#ifdef CONFIG_MACH_MX51_KUNLUN +#ifdef CONFIG_MACH_MX51_EFIKASB # ifdef machine_arch_type # undef machine_arch_type # define machine_arch_type __machine_arch_type # else -# define machine_arch_type MACH_TYPE_MX51_KUNLUN +# define machine_arch_type MACH_TYPE_MX51_EFIKASB # endif -# define machine_is_mx51_kunlun() (machine_arch_type == MACH_TYPE_MX51_KUNLUN) +# define machine_is_mx51_efikasb() (machine_arch_type == MACH_TYPE_MX51_EFIKASB) #else -# define machine_is_mx51_kunlun() (0) +# define machine_is_mx51_efikasb() (0) #endif #ifdef CONFIG_MACH_PMT1G @@ -38501,16 +38676,16 @@ extern unsigned int __machine_arch_type; # define machine_is_mx50_rdp() (0) #endif -#ifdef CONFIG_MACH_UNIVERSAL +#ifdef CONFIG_MACH_UNIVERSAL_C210 # ifdef machine_arch_type # undef machine_arch_type # define machine_arch_type __machine_arch_type # else -# define machine_arch_type MACH_TYPE_UNIVERSAL +# define machine_arch_type MACH_TYPE_UNIVERSAL_C210 # endif -# define machine_is_universal() (machine_arch_type == MACH_TYPE_UNIVERSAL) +# define machine_is_universal_c210() (machine_arch_type == MACH_TYPE_UNIVERSAL_C210) #else -# define machine_is_universal() (0) +# define machine_is_universal_c210() (0) #endif #ifdef CONFIG_MACH_REAL6410 @@ -39377,6 +39552,2106 @@ extern unsigned int __machine_arch_type; # define machine_is_pcontrol_g20() (0) #endif +#ifdef CONFIG_MACH_RDSTOR +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_RDSTOR +# endif +# define machine_is_rdstor() (machine_arch_type == MACH_TYPE_RDSTOR) +#else +# define machine_is_rdstor() (0) +#endif + +#ifdef CONFIG_MACH_USDLOADER +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_USDLOADER +# endif +# define machine_is_usdloader() (machine_arch_type == MACH_TYPE_USDLOADER) +#else +# define machine_is_usdloader() (0) +#endif + +#ifdef CONFIG_MACH_TSOPLOADER +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TSOPLOADER +# endif +# define machine_is_tsoploader() (machine_arch_type == MACH_TYPE_TSOPLOADER) +#else +# define machine_is_tsoploader() (0) +#endif + +#ifdef CONFIG_MACH_KRONOS +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_KRONOS +# endif +# define machine_is_kronos() (machine_arch_type == MACH_TYPE_KRONOS) +#else +# define machine_is_kronos() (0) +#endif + +#ifdef CONFIG_MACH_FFCORE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_FFCORE +# endif +# define machine_is_ffcore() (machine_arch_type == MACH_TYPE_FFCORE) +#else +# define machine_is_ffcore() (0) +#endif + +#ifdef CONFIG_MACH_MONE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MONE +# endif +# define machine_is_mone() (machine_arch_type == MACH_TYPE_MONE) +#else +# define machine_is_mone() (0) +#endif + +#ifdef CONFIG_MACH_UNIT2S +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_UNIT2S +# endif +# define machine_is_unit2s() (machine_arch_type == MACH_TYPE_UNIT2S) +#else +# define machine_is_unit2s() (0) +#endif + +#ifdef CONFIG_MACH_ACER_A5 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ACER_A5 +# endif +# define machine_is_acer_a5() (machine_arch_type == MACH_TYPE_ACER_A5) +#else +# define machine_is_acer_a5() (0) +#endif + +#ifdef CONFIG_MACH_ETHERPRO_ISP +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ETHERPRO_ISP +# endif +# define machine_is_etherpro_isp() (machine_arch_type == MACH_TYPE_ETHERPRO_ISP) +#else +# define machine_is_etherpro_isp() (0) +#endif + +#ifdef CONFIG_MACH_STRETCHS7000 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_STRETCHS7000 +# endif +# define machine_is_stretchs7000() (machine_arch_type == MACH_TYPE_STRETCHS7000) +#else +# define machine_is_stretchs7000() (0) +#endif + +#ifdef CONFIG_MACH_P87_SMARTSIM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_P87_SMARTSIM +# endif +# define machine_is_p87_smartsim() (machine_arch_type == MACH_TYPE_P87_SMARTSIM) +#else +# define machine_is_p87_smartsim() (0) +#endif + +#ifdef CONFIG_MACH_TULIP +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TULIP +# endif +# define machine_is_tulip() (machine_arch_type == MACH_TYPE_TULIP) +#else +# define machine_is_tulip() (0) +#endif + +#ifdef CONFIG_MACH_SUNFLOWER +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SUNFLOWER +# endif +# define machine_is_sunflower() (machine_arch_type == MACH_TYPE_SUNFLOWER) +#else +# define machine_is_sunflower() (0) +#endif + +#ifdef CONFIG_MACH_RIB +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_RIB +# endif +# define machine_is_rib() (machine_arch_type == MACH_TYPE_RIB) +#else +# define machine_is_rib() (0) +#endif + +#ifdef CONFIG_MACH_CLOD +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CLOD +# endif +# define machine_is_clod() (machine_arch_type == MACH_TYPE_CLOD) +#else +# define machine_is_clod() (0) +#endif + +#ifdef CONFIG_MACH_RUMP +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_RUMP +# endif +# define machine_is_rump() (machine_arch_type == MACH_TYPE_RUMP) +#else +# define machine_is_rump() (0) +#endif + +#ifdef CONFIG_MACH_TENDERLOIN +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TENDERLOIN +# endif +# define machine_is_tenderloin() (machine_arch_type == MACH_TYPE_TENDERLOIN) +#else +# define machine_is_tenderloin() (0) +#endif + +#ifdef CONFIG_MACH_SHORTLOIN +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SHORTLOIN +# endif +# define machine_is_shortloin() (machine_arch_type == MACH_TYPE_SHORTLOIN) +#else +# define machine_is_shortloin() (0) +#endif + +#ifdef CONFIG_MACH_CRESPO +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CRESPO +# endif +# define machine_is_crespo() (machine_arch_type == MACH_TYPE_CRESPO) +#else +# define machine_is_crespo() (0) +#endif + +#ifdef CONFIG_MACH_ANTARES +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ANTARES +# endif +# define machine_is_antares() (machine_arch_type == MACH_TYPE_ANTARES) +#else +# define machine_is_antares() (0) +#endif + +#ifdef CONFIG_MACH_WB40N +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_WB40N +# endif +# define machine_is_wb40n() (machine_arch_type == MACH_TYPE_WB40N) +#else +# define machine_is_wb40n() (0) +#endif + +#ifdef CONFIG_MACH_HERRING +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HERRING +# endif +# define machine_is_herring() (machine_arch_type == MACH_TYPE_HERRING) +#else +# define machine_is_herring() (0) +#endif + +#ifdef CONFIG_MACH_NAXY400 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NAXY400 +# endif +# define machine_is_naxy400() (machine_arch_type == MACH_TYPE_NAXY400) +#else +# define machine_is_naxy400() (0) +#endif + +#ifdef CONFIG_MACH_NAXY1200 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NAXY1200 +# endif +# define machine_is_naxy1200() (machine_arch_type == MACH_TYPE_NAXY1200) +#else +# define machine_is_naxy1200() (0) +#endif + +#ifdef CONFIG_MACH_VPR200 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_VPR200 +# endif +# define machine_is_vpr200() (machine_arch_type == MACH_TYPE_VPR200) +#else +# define machine_is_vpr200() (0) +#endif + +#ifdef CONFIG_MACH_BUG20 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BUG20 +# endif +# define machine_is_bug20() (machine_arch_type == MACH_TYPE_BUG20) +#else +# define machine_is_bug20() (0) +#endif + +#ifdef CONFIG_MACH_GOFLEXNET +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_GOFLEXNET +# endif +# define machine_is_goflexnet() (machine_arch_type == MACH_TYPE_GOFLEXNET) +#else +# define machine_is_goflexnet() (0) +#endif + +#ifdef CONFIG_MACH_TORBRECK +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TORBRECK +# endif +# define machine_is_torbreck() (machine_arch_type == MACH_TYPE_TORBRECK) +#else +# define machine_is_torbreck() (0) +#endif + +#ifdef CONFIG_MACH_SAARB_MG1 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SAARB_MG1 +# endif +# define machine_is_saarb_mg1() (machine_arch_type == MACH_TYPE_SAARB_MG1) +#else +# define machine_is_saarb_mg1() (0) +#endif + +#ifdef CONFIG_MACH_CALLISTO +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CALLISTO +# endif +# define machine_is_callisto() (machine_arch_type == MACH_TYPE_CALLISTO) +#else +# define machine_is_callisto() (0) +#endif + +#ifdef CONFIG_MACH_MULTHSU +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MULTHSU +# endif +# define machine_is_multhsu() (machine_arch_type == MACH_TYPE_MULTHSU) +#else +# define machine_is_multhsu() (0) +#endif + +#ifdef CONFIG_MACH_SALUDA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SALUDA +# endif +# define machine_is_saluda() (machine_arch_type == MACH_TYPE_SALUDA) +#else +# define machine_is_saluda() (0) +#endif + +#ifdef CONFIG_MACH_PEMP_OMAP3_APOLLO +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PEMP_OMAP3_APOLLO +# endif +# define machine_is_pemp_omap3_apollo() (machine_arch_type == MACH_TYPE_PEMP_OMAP3_APOLLO) +#else +# define machine_is_pemp_omap3_apollo() (0) +#endif + +#ifdef CONFIG_MACH_VC0718 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_VC0718 +# endif +# define machine_is_vc0718() (machine_arch_type == MACH_TYPE_VC0718) +#else +# define machine_is_vc0718() (0) +#endif + +#ifdef CONFIG_MACH_MVBLX +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MVBLX +# endif +# define machine_is_mvblx() (machine_arch_type == MACH_TYPE_MVBLX) +#else +# define machine_is_mvblx() (0) +#endif + +#ifdef CONFIG_MACH_INHAND_APEIRON +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_INHAND_APEIRON +# endif +# define machine_is_inhand_apeiron() (machine_arch_type == MACH_TYPE_INHAND_APEIRON) +#else +# define machine_is_inhand_apeiron() (0) +#endif + +#ifdef CONFIG_MACH_INHAND_FURY +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_INHAND_FURY +# endif +# define machine_is_inhand_fury() (machine_arch_type == MACH_TYPE_INHAND_FURY) +#else +# define machine_is_inhand_fury() (0) +#endif + +#ifdef CONFIG_MACH_INHAND_SIREN +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_INHAND_SIREN +# endif +# define machine_is_inhand_siren() (machine_arch_type == MACH_TYPE_INHAND_SIREN) +#else +# define machine_is_inhand_siren() (0) +#endif + +#ifdef CONFIG_MACH_HDNVP +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HDNVP +# endif +# define machine_is_hdnvp() (machine_arch_type == MACH_TYPE_HDNVP) +#else +# define machine_is_hdnvp() (0) +#endif + +#ifdef CONFIG_MACH_SOFTWINNER +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SOFTWINNER +# endif +# define machine_is_softwinner() (machine_arch_type == MACH_TYPE_SOFTWINNER) +#else +# define machine_is_softwinner() (0) +#endif + +#ifdef CONFIG_MACH_PRIMA2_EVB +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PRIMA2_EVB +# endif +# define machine_is_prima2_evb() (machine_arch_type == MACH_TYPE_PRIMA2_EVB) +#else +# define machine_is_prima2_evb() (0) +#endif + +#ifdef CONFIG_MACH_NAS6210 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NAS6210 +# endif +# define machine_is_nas6210() (machine_arch_type == MACH_TYPE_NAS6210) +#else +# define machine_is_nas6210() (0) +#endif + +#ifdef CONFIG_MACH_UNISDEV +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_UNISDEV +# endif +# define machine_is_unisdev() (machine_arch_type == MACH_TYPE_UNISDEV) +#else +# define machine_is_unisdev() (0) +#endif + +#ifdef CONFIG_MACH_SBCA11 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SBCA11 +# endif +# define machine_is_sbca11() (machine_arch_type == MACH_TYPE_SBCA11) +#else +# define machine_is_sbca11() (0) +#endif + +#ifdef CONFIG_MACH_SAGA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SAGA +# endif +# define machine_is_saga() (machine_arch_type == MACH_TYPE_SAGA) +#else +# define machine_is_saga() (0) +#endif + +#ifdef CONFIG_MACH_NS_K330 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NS_K330 +# endif +# define machine_is_ns_k330() (machine_arch_type == MACH_TYPE_NS_K330) +#else +# define machine_is_ns_k330() (0) +#endif + +#ifdef CONFIG_MACH_TANNA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TANNA +# endif +# define machine_is_tanna() (machine_arch_type == MACH_TYPE_TANNA) +#else +# define machine_is_tanna() (0) +#endif + +#ifdef CONFIG_MACH_IMATE8502 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_IMATE8502 +# endif +# define machine_is_imate8502() (machine_arch_type == MACH_TYPE_IMATE8502) +#else +# define machine_is_imate8502() (0) +#endif + +#ifdef CONFIG_MACH_ASPEN +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ASPEN +# endif +# define machine_is_aspen() (machine_arch_type == MACH_TYPE_ASPEN) +#else +# define machine_is_aspen() (0) +#endif + +#ifdef CONFIG_MACH_DAINTREE_CWAC +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DAINTREE_CWAC +# endif +# define machine_is_daintree_cwac() (machine_arch_type == MACH_TYPE_DAINTREE_CWAC) +#else +# define machine_is_daintree_cwac() (0) +#endif + +#ifdef CONFIG_MACH_ZMX25 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ZMX25 +# endif +# define machine_is_zmx25() (machine_arch_type == MACH_TYPE_ZMX25) +#else +# define machine_is_zmx25() (0) +#endif + +#ifdef CONFIG_MACH_MAPLE1 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MAPLE1 +# endif +# define machine_is_maple1() (machine_arch_type == MACH_TYPE_MAPLE1) +#else +# define machine_is_maple1() (0) +#endif + +#ifdef CONFIG_MACH_QSD8X72_SURF +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_QSD8X72_SURF +# endif +# define machine_is_qsd8x72_surf() (machine_arch_type == MACH_TYPE_QSD8X72_SURF) +#else +# define machine_is_qsd8x72_surf() (0) +#endif + +#ifdef CONFIG_MACH_QSD8X72_FFA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_QSD8X72_FFA +# endif +# define machine_is_qsd8x72_ffa() (machine_arch_type == MACH_TYPE_QSD8X72_FFA) +#else +# define machine_is_qsd8x72_ffa() (0) +#endif + +#ifdef CONFIG_MACH_ABILENE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ABILENE +# endif +# define machine_is_abilene() (machine_arch_type == MACH_TYPE_ABILENE) +#else +# define machine_is_abilene() (0) +#endif + +#ifdef CONFIG_MACH_EIGEN_TTR +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EIGEN_TTR +# endif +# define machine_is_eigen_ttr() (machine_arch_type == MACH_TYPE_EIGEN_TTR) +#else +# define machine_is_eigen_ttr() (0) +#endif + +#ifdef CONFIG_MACH_IOMEGA_IX2_200 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_IOMEGA_IX2_200 +# endif +# define machine_is_iomega_ix2_200() (machine_arch_type == MACH_TYPE_IOMEGA_IX2_200) +#else +# define machine_is_iomega_ix2_200() (0) +#endif + +#ifdef CONFIG_MACH_CORETEC_VCX7400 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CORETEC_VCX7400 +# endif +# define machine_is_coretec_vcx7400() (machine_arch_type == MACH_TYPE_CORETEC_VCX7400) +#else +# define machine_is_coretec_vcx7400() (0) +#endif + +#ifdef CONFIG_MACH_SANTIAGO +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SANTIAGO +# endif +# define machine_is_santiago() (machine_arch_type == MACH_TYPE_SANTIAGO) +#else +# define machine_is_santiago() (0) +#endif + +#ifdef CONFIG_MACH_MX257SOL +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MX257SOL +# endif +# define machine_is_mx257sol() (machine_arch_type == MACH_TYPE_MX257SOL) +#else +# define machine_is_mx257sol() (0) +#endif + +#ifdef CONFIG_MACH_STRASBOURG +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_STRASBOURG +# endif +# define machine_is_strasbourg() (machine_arch_type == MACH_TYPE_STRASBOURG) +#else +# define machine_is_strasbourg() (0) +#endif + +#ifdef CONFIG_MACH_MSM8X60_FLUID +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MSM8X60_FLUID +# endif +# define machine_is_msm8x60_fluid() (machine_arch_type == MACH_TYPE_MSM8X60_FLUID) +#else +# define machine_is_msm8x60_fluid() (0) +#endif + +#ifdef CONFIG_MACH_SMARTQV5 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SMARTQV5 +# endif +# define machine_is_smartqv5() (machine_arch_type == MACH_TYPE_SMARTQV5) +#else +# define machine_is_smartqv5() (0) +#endif + +#ifdef CONFIG_MACH_SMARTQV3 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SMARTQV3 +# endif +# define machine_is_smartqv3() (machine_arch_type == MACH_TYPE_SMARTQV3) +#else +# define machine_is_smartqv3() (0) +#endif + +#ifdef CONFIG_MACH_SMARTQV7 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SMARTQV7 +# endif +# define machine_is_smartqv7() (machine_arch_type == MACH_TYPE_SMARTQV7) +#else +# define machine_is_smartqv7() (0) +#endif + +#ifdef CONFIG_MACH_PAZ00 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PAZ00 +# endif +# define machine_is_paz00() (machine_arch_type == MACH_TYPE_PAZ00) +#else +# define machine_is_paz00() (0) +#endif + +#ifdef CONFIG_MACH_ACMENETUSFOXG20 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ACMENETUSFOXG20 +# endif +# define machine_is_acmenetusfoxg20() (machine_arch_type == MACH_TYPE_ACMENETUSFOXG20) +#else +# define machine_is_acmenetusfoxg20() (0) +#endif + +#ifdef CONFIG_MACH_HTCWILLOW +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HTCWILLOW +# endif +# define machine_is_htcwillow() (machine_arch_type == MACH_TYPE_HTCWILLOW) +#else +# define machine_is_htcwillow() (0) +#endif + +#ifdef CONFIG_MACH_FWBD_0404 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_FWBD_0404 +# endif +# define machine_is_fwbd_0404() (machine_arch_type == MACH_TYPE_FWBD_0404) +#else +# define machine_is_fwbd_0404() (0) +#endif + +#ifdef CONFIG_MACH_HDGU +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HDGU +# endif +# define machine_is_hdgu() (machine_arch_type == MACH_TYPE_HDGU) +#else +# define machine_is_hdgu() (0) +#endif + +#ifdef CONFIG_MACH_PYRAMID +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PYRAMID +# endif +# define machine_is_pyramid() (machine_arch_type == MACH_TYPE_PYRAMID) +#else +# define machine_is_pyramid() (0) +#endif + +#ifdef CONFIG_MACH_EPIPHAN +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EPIPHAN +# endif +# define machine_is_epiphan() (machine_arch_type == MACH_TYPE_EPIPHAN) +#else +# define machine_is_epiphan() (0) +#endif + +#ifdef CONFIG_MACH_OMAP_BENDER +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP_BENDER +# endif +# define machine_is_omap_bender() (machine_arch_type == MACH_TYPE_OMAP_BENDER) +#else +# define machine_is_omap_bender() (0) +#endif + +#ifdef CONFIG_MACH_GURNARD +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_GURNARD +# endif +# define machine_is_gurnard() (machine_arch_type == MACH_TYPE_GURNARD) +#else +# define machine_is_gurnard() (0) +#endif + +#ifdef CONFIG_MACH_GTL_IT5100 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_GTL_IT5100 +# endif +# define machine_is_gtl_it5100() (machine_arch_type == MACH_TYPE_GTL_IT5100) +#else +# define machine_is_gtl_it5100() (0) +#endif + +#ifdef CONFIG_MACH_BCM2708 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BCM2708 +# endif +# define machine_is_bcm2708() (machine_arch_type == MACH_TYPE_BCM2708) +#else +# define machine_is_bcm2708() (0) +#endif + +#ifdef CONFIG_MACH_MX51_GGC +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MX51_GGC +# endif +# define machine_is_mx51_ggc() (machine_arch_type == MACH_TYPE_MX51_GGC) +#else +# define machine_is_mx51_ggc() (0) +#endif + +#ifdef CONFIG_MACH_SHARESPACE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SHARESPACE +# endif +# define machine_is_sharespace() (machine_arch_type == MACH_TYPE_SHARESPACE) +#else +# define machine_is_sharespace() (0) +#endif + +#ifdef CONFIG_MACH_HABA_KNX_EXPLORER +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HABA_KNX_EXPLORER +# endif +# define machine_is_haba_knx_explorer() (machine_arch_type == MACH_TYPE_HABA_KNX_EXPLORER) +#else +# define machine_is_haba_knx_explorer() (0) +#endif + +#ifdef CONFIG_MACH_SIMTEC_KIRKMOD +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SIMTEC_KIRKMOD +# endif +# define machine_is_simtec_kirkmod() (machine_arch_type == MACH_TYPE_SIMTEC_KIRKMOD) +#else +# define machine_is_simtec_kirkmod() (0) +#endif + +#ifdef CONFIG_MACH_CRUX +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CRUX +# endif +# define machine_is_crux() (machine_arch_type == MACH_TYPE_CRUX) +#else +# define machine_is_crux() (0) +#endif + +#ifdef CONFIG_MACH_MX51_BRAVO +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MX51_BRAVO +# endif +# define machine_is_mx51_bravo() (machine_arch_type == MACH_TYPE_MX51_BRAVO) +#else +# define machine_is_mx51_bravo() (0) +#endif + +#ifdef CONFIG_MACH_CHARON +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CHARON +# endif +# define machine_is_charon() (machine_arch_type == MACH_TYPE_CHARON) +#else +# define machine_is_charon() (0) +#endif + +#ifdef CONFIG_MACH_PICOCOM3 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PICOCOM3 +# endif +# define machine_is_picocom3() (machine_arch_type == MACH_TYPE_PICOCOM3) +#else +# define machine_is_picocom3() (0) +#endif + +#ifdef CONFIG_MACH_PICOCOM4 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PICOCOM4 +# endif +# define machine_is_picocom4() (machine_arch_type == MACH_TYPE_PICOCOM4) +#else +# define machine_is_picocom4() (0) +#endif + +#ifdef CONFIG_MACH_SERRANO +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SERRANO +# endif +# define machine_is_serrano() (machine_arch_type == MACH_TYPE_SERRANO) +#else +# define machine_is_serrano() (0) +#endif + +#ifdef CONFIG_MACH_DOUBLESHOT +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DOUBLESHOT +# endif +# define machine_is_doubleshot() (machine_arch_type == MACH_TYPE_DOUBLESHOT) +#else +# define machine_is_doubleshot() (0) +#endif + +#ifdef CONFIG_MACH_EVSY +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EVSY +# endif +# define machine_is_evsy() (machine_arch_type == MACH_TYPE_EVSY) +#else +# define machine_is_evsy() (0) +#endif + +#ifdef CONFIG_MACH_HUASHAN +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HUASHAN +# endif +# define machine_is_huashan() (machine_arch_type == MACH_TYPE_HUASHAN) +#else +# define machine_is_huashan() (0) +#endif + +#ifdef CONFIG_MACH_LAUSANNE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_LAUSANNE +# endif +# define machine_is_lausanne() (machine_arch_type == MACH_TYPE_LAUSANNE) +#else +# define machine_is_lausanne() (0) +#endif + +#ifdef CONFIG_MACH_EMERALD +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EMERALD +# endif +# define machine_is_emerald() (machine_arch_type == MACH_TYPE_EMERALD) +#else +# define machine_is_emerald() (0) +#endif + +#ifdef CONFIG_MACH_TQMA35 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TQMA35 +# endif +# define machine_is_tqma35() (machine_arch_type == MACH_TYPE_TQMA35) +#else +# define machine_is_tqma35() (0) +#endif + +#ifdef CONFIG_MACH_MARVEL +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MARVEL +# endif +# define machine_is_marvel() (machine_arch_type == MACH_TYPE_MARVEL) +#else +# define machine_is_marvel() (0) +#endif + +#ifdef CONFIG_MACH_MANUAE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MANUAE +# endif +# define machine_is_manuae() (machine_arch_type == MACH_TYPE_MANUAE) +#else +# define machine_is_manuae() (0) +#endif + +#ifdef CONFIG_MACH_CHACHA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CHACHA +# endif +# define machine_is_chacha() (machine_arch_type == MACH_TYPE_CHACHA) +#else +# define machine_is_chacha() (0) +#endif + +#ifdef CONFIG_MACH_LEMON +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_LEMON +# endif +# define machine_is_lemon() (machine_arch_type == MACH_TYPE_LEMON) +#else +# define machine_is_lemon() (0) +#endif + +#ifdef CONFIG_MACH_CSC +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CSC +# endif +# define machine_is_csc() (machine_arch_type == MACH_TYPE_CSC) +#else +# define machine_is_csc() (0) +#endif + +#ifdef CONFIG_MACH_GIRA_KNXIP_ROUTER +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_GIRA_KNXIP_ROUTER +# endif +# define machine_is_gira_knxip_router() (machine_arch_type == MACH_TYPE_GIRA_KNXIP_ROUTER) +#else +# define machine_is_gira_knxip_router() (0) +#endif + +#ifdef CONFIG_MACH_T20 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_T20 +# endif +# define machine_is_t20() (machine_arch_type == MACH_TYPE_T20) +#else +# define machine_is_t20() (0) +#endif + +#ifdef CONFIG_MACH_HDMINI +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HDMINI +# endif +# define machine_is_hdmini() (machine_arch_type == MACH_TYPE_HDMINI) +#else +# define machine_is_hdmini() (0) +#endif + +#ifdef CONFIG_MACH_SCIPHONE_G2 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SCIPHONE_G2 +# endif +# define machine_is_sciphone_g2() (machine_arch_type == MACH_TYPE_SCIPHONE_G2) +#else +# define machine_is_sciphone_g2() (0) +#endif + +#ifdef CONFIG_MACH_EXPRESS +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EXPRESS +# endif +# define machine_is_express() (machine_arch_type == MACH_TYPE_EXPRESS) +#else +# define machine_is_express() (0) +#endif + +#ifdef CONFIG_MACH_EXPRESS_KT +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EXPRESS_KT +# endif +# define machine_is_express_kt() (machine_arch_type == MACH_TYPE_EXPRESS_KT) +#else +# define machine_is_express_kt() (0) +#endif + +#ifdef CONFIG_MACH_MAXIMASP +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MAXIMASP +# endif +# define machine_is_maximasp() (machine_arch_type == MACH_TYPE_MAXIMASP) +#else +# define machine_is_maximasp() (0) +#endif + +#ifdef CONFIG_MACH_NITROGEN_IMX51 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NITROGEN_IMX51 +# endif +# define machine_is_nitrogen_imx51() (machine_arch_type == MACH_TYPE_NITROGEN_IMX51) +#else +# define machine_is_nitrogen_imx51() (0) +#endif + +#ifdef CONFIG_MACH_NITROGEN_IMX53 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NITROGEN_IMX53 +# endif +# define machine_is_nitrogen_imx53() (machine_arch_type == MACH_TYPE_NITROGEN_IMX53) +#else +# define machine_is_nitrogen_imx53() (0) +#endif + +#ifdef CONFIG_MACH_SUNFIRE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SUNFIRE +# endif +# define machine_is_sunfire() (machine_arch_type == MACH_TYPE_SUNFIRE) +#else +# define machine_is_sunfire() (0) +#endif + +#ifdef CONFIG_MACH_AROWANA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AROWANA +# endif +# define machine_is_arowana() (machine_arch_type == MACH_TYPE_AROWANA) +#else +# define machine_is_arowana() (0) +#endif + +#ifdef CONFIG_MACH_TEGRA_DAYTONA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TEGRA_DAYTONA +# endif +# define machine_is_tegra_daytona() (machine_arch_type == MACH_TYPE_TEGRA_DAYTONA) +#else +# define machine_is_tegra_daytona() (0) +#endif + +#ifdef CONFIG_MACH_TEGRA_SWORDFISH +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TEGRA_SWORDFISH +# endif +# define machine_is_tegra_swordfish() (machine_arch_type == MACH_TYPE_TEGRA_SWORDFISH) +#else +# define machine_is_tegra_swordfish() (0) +#endif + +#ifdef CONFIG_MACH_EDISON +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EDISON +# endif +# define machine_is_edison() (machine_arch_type == MACH_TYPE_EDISON) +#else +# define machine_is_edison() (0) +#endif + +#ifdef CONFIG_MACH_SVP8500V1 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SVP8500V1 +# endif +# define machine_is_svp8500v1() (machine_arch_type == MACH_TYPE_SVP8500V1) +#else +# define machine_is_svp8500v1() (0) +#endif + +#ifdef CONFIG_MACH_SVP8500V2 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SVP8500V2 +# endif +# define machine_is_svp8500v2() (machine_arch_type == MACH_TYPE_SVP8500V2) +#else +# define machine_is_svp8500v2() (0) +#endif + +#ifdef CONFIG_MACH_SVP5500 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SVP5500 +# endif +# define machine_is_svp5500() (machine_arch_type == MACH_TYPE_SVP5500) +#else +# define machine_is_svp5500() (0) +#endif + +#ifdef CONFIG_MACH_B5500 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_B5500 +# endif +# define machine_is_b5500() (machine_arch_type == MACH_TYPE_B5500) +#else +# define machine_is_b5500() (0) +#endif + +#ifdef CONFIG_MACH_S5500 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_S5500 +# endif +# define machine_is_s5500() (machine_arch_type == MACH_TYPE_S5500) +#else +# define machine_is_s5500() (0) +#endif + +#ifdef CONFIG_MACH_ICON +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ICON +# endif +# define machine_is_icon() (machine_arch_type == MACH_TYPE_ICON) +#else +# define machine_is_icon() (0) +#endif + +#ifdef CONFIG_MACH_ELEPHANT +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ELEPHANT +# endif +# define machine_is_elephant() (machine_arch_type == MACH_TYPE_ELEPHANT) +#else +# define machine_is_elephant() (0) +#endif + +#ifdef CONFIG_MACH_MSM8X60_FUSION +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MSM8X60_FUSION +# endif +# define machine_is_msm8x60_fusion() (machine_arch_type == MACH_TYPE_MSM8X60_FUSION) +#else +# define machine_is_msm8x60_fusion() (0) +#endif + +#ifdef CONFIG_MACH_SHOOTER +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SHOOTER +# endif +# define machine_is_shooter() (machine_arch_type == MACH_TYPE_SHOOTER) +#else +# define machine_is_shooter() (0) +#endif + +#ifdef CONFIG_MACH_SPADE_LTE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SPADE_LTE +# endif +# define machine_is_spade_lte() (machine_arch_type == MACH_TYPE_SPADE_LTE) +#else +# define machine_is_spade_lte() (0) +#endif + +#ifdef CONFIG_MACH_PHILHWANI +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PHILHWANI +# endif +# define machine_is_philhwani() (machine_arch_type == MACH_TYPE_PHILHWANI) +#else +# define machine_is_philhwani() (0) +#endif + +#ifdef CONFIG_MACH_GSNCOMM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_GSNCOMM +# endif +# define machine_is_gsncomm() (machine_arch_type == MACH_TYPE_GSNCOMM) +#else +# define machine_is_gsncomm() (0) +#endif + +#ifdef CONFIG_MACH_STRASBOURG_A2 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_STRASBOURG_A2 +# endif +# define machine_is_strasbourg_a2() (machine_arch_type == MACH_TYPE_STRASBOURG_A2) +#else +# define machine_is_strasbourg_a2() (0) +#endif + +#ifdef CONFIG_MACH_MMM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MMM +# endif +# define machine_is_mmm() (machine_arch_type == MACH_TYPE_MMM) +#else +# define machine_is_mmm() (0) +#endif + +#ifdef CONFIG_MACH_DAVINCI_DM365_BV +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DAVINCI_DM365_BV +# endif +# define machine_is_davinci_dm365_bv() (machine_arch_type == MACH_TYPE_DAVINCI_DM365_BV) +#else +# define machine_is_davinci_dm365_bv() (0) +#endif + +#ifdef CONFIG_MACH_AG5EVM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AG5EVM +# endif +# define machine_is_ag5evm() (machine_arch_type == MACH_TYPE_AG5EVM) +#else +# define machine_is_ag5evm() (0) +#endif + +#ifdef CONFIG_MACH_SC575PLC +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SC575PLC +# endif +# define machine_is_sc575plc() (machine_arch_type == MACH_TYPE_SC575PLC) +#else +# define machine_is_sc575plc() (0) +#endif + +#ifdef CONFIG_MACH_SC575IPC +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SC575IPC +# endif +# define machine_is_sc575hmi() (machine_arch_type == MACH_TYPE_SC575IPC) +#else +# define machine_is_sc575hmi() (0) +#endif + +#ifdef CONFIG_MACH_OMAP3_TDM3730 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP3_TDM3730 +# endif +# define machine_is_omap3_tdm3730() (machine_arch_type == MACH_TYPE_OMAP3_TDM3730) +#else +# define machine_is_omap3_tdm3730() (0) +#endif + +#ifdef CONFIG_MACH_G7 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_G7 +# endif +# define machine_is_g7() (machine_arch_type == MACH_TYPE_G7) +#else +# define machine_is_g7() (0) +#endif + +#ifdef CONFIG_MACH_TOP9000_EVAL +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TOP9000_EVAL +# endif +# define machine_is_top9000_eval() (machine_arch_type == MACH_TYPE_TOP9000_EVAL) +#else +# define machine_is_top9000_eval() (0) +#endif + +#ifdef CONFIG_MACH_TOP9000_SU +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TOP9000_SU +# endif +# define machine_is_top9000_su() (machine_arch_type == MACH_TYPE_TOP9000_SU) +#else +# define machine_is_top9000_su() (0) +#endif + +#ifdef CONFIG_MACH_UTM300 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_UTM300 +# endif +# define machine_is_utm300() (machine_arch_type == MACH_TYPE_UTM300) +#else +# define machine_is_utm300() (0) +#endif + +#ifdef CONFIG_MACH_TSUNAGI +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TSUNAGI +# endif +# define machine_is_tsunagi() (machine_arch_type == MACH_TYPE_TSUNAGI) +#else +# define machine_is_tsunagi() (0) +#endif + +#ifdef CONFIG_MACH_TS75XX +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TS75XX +# endif +# define machine_is_ts75xx() (machine_arch_type == MACH_TYPE_TS75XX) +#else +# define machine_is_ts75xx() (0) +#endif + +#ifdef CONFIG_MACH_MSM8X60_FUSN_FFA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MSM8X60_FUSN_FFA +# endif +# define machine_is_msm8x60_fusn_ffa() (machine_arch_type == MACH_TYPE_MSM8X60_FUSN_FFA) +#else +# define machine_is_msm8x60_fusn_ffa() (0) +#endif + +#ifdef CONFIG_MACH_TS47XX +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TS47XX +# endif +# define machine_is_ts47xx() (machine_arch_type == MACH_TYPE_TS47XX) +#else +# define machine_is_ts47xx() (0) +#endif + +#ifdef CONFIG_MACH_DA850_K5 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DA850_K5 +# endif +# define machine_is_da850_k5() (machine_arch_type == MACH_TYPE_DA850_K5) +#else +# define machine_is_da850_k5() (0) +#endif + +#ifdef CONFIG_MACH_AX502 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AX502 +# endif +# define machine_is_ax502() (machine_arch_type == MACH_TYPE_AX502) +#else +# define machine_is_ax502() (0) +#endif + +#ifdef CONFIG_MACH_IGEP0032 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_IGEP0032 +# endif +# define machine_is_igep0032() (machine_arch_type == MACH_TYPE_IGEP0032) +#else +# define machine_is_igep0032() (0) +#endif + +#ifdef CONFIG_MACH_ANTERO +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ANTERO +# endif +# define machine_is_antero() (machine_arch_type == MACH_TYPE_ANTERO) +#else +# define machine_is_antero() (0) +#endif + +#ifdef CONFIG_MACH_SYNERGY +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SYNERGY +# endif +# define machine_is_synergy() (machine_arch_type == MACH_TYPE_SYNERGY) +#else +# define machine_is_synergy() (0) +#endif + +#ifdef CONFIG_MACH_ICS_IF_VOIP +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ICS_IF_VOIP +# endif +# define machine_is_ics_if_voip() (machine_arch_type == MACH_TYPE_ICS_IF_VOIP) +#else +# define machine_is_ics_if_voip() (0) +#endif + +#ifdef CONFIG_MACH_WLF_CRAGG_6410 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_WLF_CRAGG_6410 +# endif +# define machine_is_wlf_cragg_6410() (machine_arch_type == MACH_TYPE_WLF_CRAGG_6410) +#else +# define machine_is_wlf_cragg_6410() (0) +#endif + +#ifdef CONFIG_MACH_PUNICA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PUNICA +# endif +# define machine_is_punica() (machine_arch_type == MACH_TYPE_PUNICA) +#else +# define machine_is_punica() (0) +#endif + +#ifdef CONFIG_MACH_SBC_NT250 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SBC_NT250 +# endif +# define machine_is_sbc_nt250() (machine_arch_type == MACH_TYPE_SBC_NT250) +#else +# define machine_is_sbc_nt250() (0) +#endif + +#ifdef CONFIG_MACH_MX27_WMULTRA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MX27_WMULTRA +# endif +# define machine_is_mx27_wmultra() (machine_arch_type == MACH_TYPE_MX27_WMULTRA) +#else +# define machine_is_mx27_wmultra() (0) +#endif + +#ifdef CONFIG_MACH_MACKEREL +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MACKEREL +# endif +# define machine_is_mackerel() (machine_arch_type == MACH_TYPE_MACKEREL) +#else +# define machine_is_mackerel() (0) +#endif + +#ifdef CONFIG_MACH_FA9X27 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_FA9X27 +# endif +# define machine_is_fa9x27() (machine_arch_type == MACH_TYPE_FA9X27) +#else +# define machine_is_fa9x27() (0) +#endif + +#ifdef CONFIG_MACH_NS2816TB +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NS2816TB +# endif +# define machine_is_ns2816tb() (machine_arch_type == MACH_TYPE_NS2816TB) +#else +# define machine_is_ns2816tb() (0) +#endif + +#ifdef CONFIG_MACH_NS2816_NTPAD +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NS2816_NTPAD +# endif +# define machine_is_ns2816_ntpad() (machine_arch_type == MACH_TYPE_NS2816_NTPAD) +#else +# define machine_is_ns2816_ntpad() (0) +#endif + +#ifdef CONFIG_MACH_NS2816_NTNB +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NS2816_NTNB +# endif +# define machine_is_ns2816_ntnb() (machine_arch_type == MACH_TYPE_NS2816_NTNB) +#else +# define machine_is_ns2816_ntnb() (0) +#endif + +#ifdef CONFIG_MACH_KAEN +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_KAEN +# endif +# define machine_is_kaen() (machine_arch_type == MACH_TYPE_KAEN) +#else +# define machine_is_kaen() (0) +#endif + +#ifdef CONFIG_MACH_NV1000 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NV1000 +# endif +# define machine_is_nv1000() (machine_arch_type == MACH_TYPE_NV1000) +#else +# define machine_is_nv1000() (0) +#endif + +#ifdef CONFIG_MACH_NUC950TS +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NUC950TS +# endif +# define machine_is_nuc950ts() (machine_arch_type == MACH_TYPE_NUC950TS) +#else +# define machine_is_nuc950ts() (0) +#endif + +#ifdef CONFIG_MACH_NOKIA_RM680 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NOKIA_RM680 +# endif +# define machine_is_nokia_rm680() (machine_arch_type == MACH_TYPE_NOKIA_RM680) +#else +# define machine_is_nokia_rm680() (0) +#endif + +#ifdef CONFIG_MACH_AST2200 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AST2200 +# endif +# define machine_is_ast2200() (machine_arch_type == MACH_TYPE_AST2200) +#else +# define machine_is_ast2200() (0) +#endif + +#ifdef CONFIG_MACH_LEAD +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_LEAD +# endif +# define machine_is_lead() (machine_arch_type == MACH_TYPE_LEAD) +#else +# define machine_is_lead() (0) +#endif + +#ifdef CONFIG_MACH_UNINO1 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_UNINO1 +# endif +# define machine_is_unino1() (machine_arch_type == MACH_TYPE_UNINO1) +#else +# define machine_is_unino1() (0) +#endif + +#ifdef CONFIG_MACH_GREECO +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_GREECO +# endif +# define machine_is_greeco() (machine_arch_type == MACH_TYPE_GREECO) +#else +# define machine_is_greeco() (0) +#endif + +#ifdef CONFIG_MACH_VERDI +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_VERDI +# endif +# define machine_is_verdi() (machine_arch_type == MACH_TYPE_VERDI) +#else +# define machine_is_verdi() (0) +#endif + +#ifdef CONFIG_MACH_DM6446_ADBOX +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DM6446_ADBOX +# endif +# define machine_is_dm6446_adbox() (machine_arch_type == MACH_TYPE_DM6446_ADBOX) +#else +# define machine_is_dm6446_adbox() (0) +#endif + +#ifdef CONFIG_MACH_QUAD_SALSA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_QUAD_SALSA +# endif +# define machine_is_quad_salsa() (machine_arch_type == MACH_TYPE_QUAD_SALSA) +#else +# define machine_is_quad_salsa() (0) +#endif + +#ifdef CONFIG_MACH_ABB_GMA_1_1 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ABB_GMA_1_1 +# endif +# define machine_is_abb_gma_1_1() (machine_arch_type == MACH_TYPE_ABB_GMA_1_1) +#else +# define machine_is_abb_gma_1_1() (0) +#endif + +#ifdef CONFIG_MACH_SVCID +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SVCID +# endif +# define machine_is_svcid() (machine_arch_type == MACH_TYPE_SVCID) +#else +# define machine_is_svcid() (0) +#endif + +#ifdef CONFIG_MACH_MSM8960_SIM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MSM8960_SIM +# endif +# define machine_is_msm8960_sim() (machine_arch_type == MACH_TYPE_MSM8960_SIM) +#else +# define machine_is_msm8960_sim() (0) +#endif + +#ifdef CONFIG_MACH_MSM8960_RUMI3 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MSM8960_RUMI3 +# endif +# define machine_is_msm8960_rumi3() (machine_arch_type == MACH_TYPE_MSM8960_RUMI3) +#else +# define machine_is_msm8960_rumi3() (0) +#endif + +#ifdef CONFIG_MACH_ICON_G +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ICON_G +# endif +# define machine_is_icon_g() (machine_arch_type == MACH_TYPE_ICON_G) +#else +# define machine_is_icon_g() (0) +#endif + +#ifdef CONFIG_MACH_MB3 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MB3 +# endif +# define machine_is_mb3() (machine_arch_type == MACH_TYPE_MB3) +#else +# define machine_is_mb3() (0) +#endif + +#ifdef CONFIG_MACH_GSIA18S +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_GSIA18S +# endif +# define machine_is_gsia18s() (machine_arch_type == MACH_TYPE_GSIA18S) +#else +# define machine_is_gsia18s() (0) +#endif + +#ifdef CONFIG_MACH_PIVICC +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PIVICC +# endif +# define machine_is_pivicc() (machine_arch_type == MACH_TYPE_PIVICC) +#else +# define machine_is_pivicc() (0) +#endif + +#ifdef CONFIG_MACH_PCM048 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PCM048 +# endif +# define machine_is_pcm048() (machine_arch_type == MACH_TYPE_PCM048) +#else +# define machine_is_pcm048() (0) +#endif + +#ifdef CONFIG_MACH_DDS +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DDS +# endif +# define machine_is_dds() (machine_arch_type == MACH_TYPE_DDS) +#else +# define machine_is_dds() (0) +#endif + +#ifdef CONFIG_MACH_CHALTEN_XA1 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CHALTEN_XA1 +# endif +# define machine_is_chalten_xa1() (machine_arch_type == MACH_TYPE_CHALTEN_XA1) +#else +# define machine_is_chalten_xa1() (0) +#endif + /* * These have not yet been registered */ diff --git a/board/cm_t35/Makefile b/board/cm_t35/Makefile new file mode 100644 index 0000000..862b8dc --- /dev/null +++ b/board/cm_t35/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := cm_t35.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c new file mode 100644 index 0000000..459df0b --- /dev/null +++ b/board/cm_t35/cm_t35.c @@ -0,0 +1,371 @@ +/* + * (C) Copyright 2010 + * CompuLab, Ltd. <www.compulab.co.il> + * + * Author: Mike Rapoport <mike@compulab.co.il> + * + * Derived from omap3evm and Beagle Board by + * Manikandan Pillai <mani.pillai@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <netdev.h> +#include <net.h> +#include <i2c.h> +#include <twl4030.h> + +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/mux.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> + +const omap3_sysinfo sysinfo = { + DDR_DISCRETE, + "CM-T35 board", + "NAND", +}; + +static u32 gpmc_net_config[GPMC_MAX_REG] = { + NET_GPMC_CONFIG1, + NET_GPMC_CONFIG2, + NET_GPMC_CONFIG3, + NET_GPMC_CONFIG4, + NET_GPMC_CONFIG5, + NET_GPMC_CONFIG6, + 0 +}; + +static u32 gpmc_nand_config[GPMC_MAX_REG] = { + SMNAND_GPMC_CONFIG1, + SMNAND_GPMC_CONFIG2, + SMNAND_GPMC_CONFIG3, + SMNAND_GPMC_CONFIG4, + SMNAND_GPMC_CONFIG5, + SMNAND_GPMC_CONFIG6, + 0, +}; + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + + enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[0], + CONFIG_SYS_NAND_BASE, GPMC_SIZE_16M); + + /* board id for Linux */ + gd->bd->bi_arch_number = MACH_TYPE_CM_T35; + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +/* + * Routine: misc_init_r + * Description: Init I2C and display die ID + */ +int misc_init_r(void) +{ +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif + + dieid_num_r(); + + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + /* SDRC */ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)); /*SDRC_D0*/ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)); /*SDRC_D1*/ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)); /*SDRC_D2*/ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)); /*SDRC_D3*/ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)); /*SDRC_D4*/ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)); /*SDRC_D5*/ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)); /*SDRC_D6*/ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)); /*SDRC_D7*/ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)); /*SDRC_D8*/ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)); /*SDRC_D9*/ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)); /*SDRC_D10*/ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)); /*SDRC_D11*/ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)); /*SDRC_D12*/ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)); /*SDRC_D13*/ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)); /*SDRC_D14*/ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)); /*SDRC_D15*/ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)); /*SDRC_D16*/ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)); /*SDRC_D17*/ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)); /*SDRC_D18*/ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)); /*SDRC_D19*/ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)); /*SDRC_D20*/ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)); /*SDRC_D21*/ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)); /*SDRC_D22*/ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)); /*SDRC_D23*/ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)); /*SDRC_D24*/ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)); /*SDRC_D25*/ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)); /*SDRC_D26*/ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)); /*SDRC_D27*/ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)); /*SDRC_D28*/ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)); /*SDRC_D29*/ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)); /*SDRC_D30*/ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)); /*SDRC_D31*/ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)); /*SDRC_CLK*/ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)); /*SDRC_DQS0*/ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)); /*SDRC_DQS1*/ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)); /*SDRC_DQS2*/ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)); /*SDRC_DQS3*/ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)); /*SDRC_CKE0*/ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)); /*SDRC_CKE1*/ + + /* GPMC */ + MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)); /*GPMC_A1*/ + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)); /*GPMC_A2*/ + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)); /*GPMC_A3*/ + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)); /*GPMC_A4*/ + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)); /*GPMC_A5*/ + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)); /*GPMC_A6*/ + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)); /*GPMC_A7*/ + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)); /*GPMC_A8*/ + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)); /*GPMC_A9*/ + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)); /*GPMC_A10*/ + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)); /*GPMC_D0*/ + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)); /*GPMC_D1*/ + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)); /*GPMC_D2*/ + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)); /*GPMC_D3*/ + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)); /*GPMC_D4*/ + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)); /*GPMC_D5*/ + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)); /*GPMC_D6*/ + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)); /*GPMC_D7*/ + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)); /*GPMC_D8*/ + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)); /*GPMC_D9*/ + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)); /*GPMC_D10*/ + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)); /*GPMC_D11*/ + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)); /*GPMC_D12*/ + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)); /*GPMC_D13*/ + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)); /*GPMC_D14*/ + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)); /*GPMC_D15*/ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)); /*GPMC_nCS0*/ + + /* SB-T35 Ethernet */ + MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)); /*GPMC_nCS4*/ + + /* CM-T35 Ethernet */ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/ + MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)); /*GPIO_59*/ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)); /*nADV_ALE*/ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)); /*nOE*/ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)); /*nWE*/ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)); /*nBE0_CLE*/ + MUX_VAL(CP(GPMC_NBE1), (IDIS | PTD | DIS | M4)); /*GPIO_61*/ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)); /*nWP*/ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)); /*WAIT0*/ + + /* DSS */ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)); /*DSS_PCLK*/ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)); /*DSS_HSYNC*/ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)); /*DSS_VSYNC*/ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)); /*DSS_ACBIAS*/ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)); /*DSS_DATA0*/ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)); /*DSS_DATA1*/ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)); /*DSS_DATA2*/ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)); /*DSS_DATA3*/ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)); /*DSS_DATA4*/ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)); /*DSS_DATA5*/ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)); /*DSS_DATA6*/ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)); /*DSS_DATA7*/ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)); /*DSS_DATA8*/ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)); /*DSS_DATA9*/ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)); /*DSS_DATA10*/ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)); /*DSS_DATA11*/ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)); /*DSS_DATA12*/ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)); /*DSS_DATA13*/ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)); /*DSS_DATA14*/ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)); /*DSS_DATA15*/ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)); /*DSS_DATA16*/ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)); /*DSS_DATA17*/ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)); /*DSS_DATA18*/ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)); /*DSS_DATA19*/ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)); /*DSS_DATA20*/ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)); /*DSS_DATA21*/ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)); /*DSS_DATA22*/ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)); /*DSS_DATA23*/ + + /* serial interface */ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)); /*UART3_RX*/ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)); /*UART3_TX*/ + + /* mUSB */ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)); /*HSUSB0_CLK*/ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)); /*HSUSB0_STP*/ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)); /*HSUSB0_DIR*/ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)); /*HSUSB0_NXT*/ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA0*/ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA1*/ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA2*/ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA3*/ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA4*/ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA5*/ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA6*/ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA7*/ + + /* I2C1 */ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)); /*I2C1_SCL*/ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)); /*I2C1_SDA*/ + + /* control and debug */ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)); /*SYS_32K*/ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)); /*SYS_CLKREQ*/ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)); /*SYS_nIRQ*/ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)); /*OFF_MODE*/ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)); /*CLKOUT1*/ + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)); /*green LED*/ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)); /*JTAG_nTRST*/ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)); /*JTAG_TCK*/ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)); /*JTAG_TMS*/ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)); /*JTAG_TDI*/ +} + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + return omap_mmc_init(0); +} +#endif + +/* + * Routine: setup_net_chip_gmpc + * Description: Setting up the configuration GPMC registers specific to the + * Ethernet hardware. + */ +static void setup_net_chip_gmpc(void) +{ + struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; + + enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5], + CM_T35_SMC911X_BASE, GPMC_SIZE_16M); + enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4], + SB_T35_SMC911X_BASE, GPMC_SIZE_16M); + + /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ + writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); + + /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); + + /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, + &ctrl_base->gpmc_nadv_ale); +} + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C +/* + * Routine: reset_net_chip + * Description: reset the Ethernet controller via TPS65930 GPIO + */ +static void reset_net_chip(void) +{ + /* Set GPIO1 of TPS65930 as output */ + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02, + TWL4030_BASEADD_GPIO+0x03); + /* Send a pulse on the GPIO pin */ + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02, + TWL4030_BASEADD_GPIO+0x0C); + udelay(1); + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02, + TWL4030_BASEADD_GPIO+0x09); + udelay(1); + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02, + TWL4030_BASEADD_GPIO+0x0C); +} +#else +static inline void reset_net_chip(void) {} +#endif + +/* + * Routine: handle_mac_address + * Description: prepare MAC address for on-board Ethernet. + */ +static int handle_mac_address(void) +{ + unsigned char enetaddr[6]; + int rc; + + rc = eth_getenv_enetaddr("ethaddr", enetaddr); + if (rc) + return 0; + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + rc = i2c_read(0x50, 0, 1, enetaddr, 6); + if (rc) + return rc; +#endif + + if (!is_valid_ether_addr(enetaddr)) + return -1; + + return eth_setenv_enetaddr("ethaddr", enetaddr); +} + + +/* + * Routine: board_eth_init + * Description: initialize module and base-board Ethernet chips + */ +int board_eth_init(bd_t *bis) +{ + int rc = 0, rc1 = 0; + +#ifdef CONFIG_SMC911X + setup_net_chip_gmpc(); + reset_net_chip(); + + rc1 = handle_mac_address(); + if (rc1) + printf("CM-T35: No MAC address found\n"); + + rc1 = smc911x_initialize(0, CM_T35_SMC911X_BASE); + if (rc1 > 0) + rc++; + + rc1 = smc911x_initialize(1, SB_T35_SMC911X_BASE); + if (rc1 > 0) + rc++; +#endif + + return rc; +} diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index 08c898f..2bfdf23 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -80,7 +80,7 @@ err: /* * Set the mii mode as MII or RMII */ -#if defined(CONFIG_DRIVER_TI_EMAC) +#if defined(CONFIG_SOC_DA8XX) void davinci_emac_mii_mode_sel(int mode_sel) { int val; diff --git a/board/davinci/dm355evm/dm355evm.c b/board/davinci/dm355evm/dm355evm.c index b9260b8..112851a 100644 --- a/board/davinci/dm355evm/dm355evm.c +++ b/board/davinci/dm355evm/dm355evm.c @@ -25,6 +25,10 @@ #include <asm/arch/davinci_misc.h> #include <net.h> #include <netdev.h> +#ifdef CONFIG_DAVINCI_MMC +#include <mmc.h> +#include <asm/arch/sdmmc_defs.h> +#endif DECLARE_GLOBAL_DATA_PTR; @@ -114,3 +118,40 @@ int board_nand_init(struct nand_chip *nand) } #endif + +#ifdef CONFIG_DAVINCI_MMC +static struct davinci_mmc mmc_sd0 = { + .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, + .input_clk = 108000000, + .host_caps = MMC_MODE_4BIT, + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, + .version = MMC_CTLR_VERSION_1, +}; + +#ifdef CONFIG_DAVINCI_MMC_SD1 +static struct davinci_mmc mmc_sd1 = { + .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE, + .input_clk = 108000000, + .host_caps = MMC_MODE_4BIT, + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, + .version = MMC_CTLR_VERSION_1, +}; +#endif + +int board_mmc_init(bd_t *bis) +{ + int err; + + /* Add slot-0 to mmc subsystem */ + err = davinci_mmc_init(bis, &mmc_sd0); + if (err) + return err; + +#ifdef CONFIG_DAVINCI_MMC_SD1 + /* Add slot-1 to mmc subsystem */ + err = davinci_mmc_init(bis, &mmc_sd1); +#endif + + return err; +} +#endif diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c index bc681f7..5fb7611 100644 --- a/board/davinci/dm365evm/dm365evm.c +++ b/board/davinci/dm365evm/dm365evm.c @@ -25,6 +25,10 @@ #include <asm/arch/gpio_defs.h> #include <netdev.h> #include <asm/arch/davinci_misc.h> +#ifdef CONFIG_DAVINCI_MMC +#include <mmc.h> +#include <asm/arch/sdmmc_defs.h> +#endif DECLARE_GLOBAL_DATA_PTR; @@ -101,3 +105,48 @@ int board_nand_init(struct nand_chip *nand) return 0; } #endif + +#ifdef CONFIG_DAVINCI_MMC +static struct davinci_mmc mmc_sd0 = { + .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, + .input_clk = 121500000, + .host_caps = MMC_MODE_4BIT, + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, + .version = MMC_CTLR_VERSION_2, +}; + +#ifdef CONFIG_DAVINCI_MMC_SD1 +static struct davinci_mmc mmc_sd1 = { + .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE, + .input_clk = 121500000, + .host_caps = MMC_MODE_4BIT, + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, + .version = MMC_CTLR_VERSION_2, +}; +#endif + +int board_mmc_init(bd_t *bis) +{ + int err; + + /* Add slot-0 to mmc subsystem */ + err = davinci_mmc_init(bis, &mmc_sd0); + if (err) + return err; + +#ifdef CONFIG_DAVINCI_MMC_SD1 +#define PUPDCTL1 0x01c4007c + /* PINMUX(4)-DAT0-3/CMD; PINMUX(0)-CLK */ + writel((readl(PINMUX4) | 0x55400000), PINMUX4); + writel((readl(PINMUX0) | 0x00010000), PINMUX0); + + /* Configure MMC/SD pins as pullup */ + writel((readl(PUPDCTL1) & ~0x07c0), PUPDCTL1); + + /* Add slot-1 to mmc subsystem */ + err = davinci_mmc_init(bis, &mmc_sd1); +#endif + + return err; +} +#endif diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c index 994a9aa..1a01c3c 100644 --- a/board/davinci/dm6467evm/dm6467evm.c +++ b/board/davinci/dm6467evm/dm6467evm.c @@ -17,6 +17,7 @@ */ #include <common.h> +#include <netdev.h> #include <asm/io.h> #include <nand.h> #include <asm/arch/nand_defs.h> @@ -28,8 +29,33 @@ int board_init(void) gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM; gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + lpsc_on(DAVINCI_DM646X_LPSC_TIMER0); + lpsc_on(DAVINCI_DM646X_LPSC_UART0); + lpsc_on(DAVINCI_DM646X_LPSC_I2C); + lpsc_on(DAVINCI_DM646X_LPSC_EMAC); + + /* Enable GIO3.3V cells used for EMAC */ + REG(VDD3P3V_PWDN) = 0x80000c0; + + /* Select UART function on UART0 */ + REG(PINMUX0) &= ~(0x0000003f << 18); + REG(PINMUX1) &= ~(0x00000003); + + return 0; +} + +#if defined(CONFIG_DRIVER_TI_EMAC) + +int board_eth_init(bd_t *bis) +{ + if (!davinci_emac_initialize()) { + printf("Error: Ethernet init failed!\n"); + return -1; + } + return 0; } +#endif /* CONFIG_DRIVER_TI_EMAC */ #ifdef CONFIG_NAND_DAVINCI int board_nand_init(struct nand_chip *nand) diff --git a/board/efikamx/Makefile b/board/efikamx/Makefile new file mode 100644 index 0000000..ee4a16e --- /dev/null +++ b/board/efikamx/Makefile @@ -0,0 +1,52 @@ +# +# Copyright (C) 2010, Marek Vasut <marek.vasut@gmail.com> +# +# BASED ON: imx51evk +# +# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> +# +# (C) Copyright 2009 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := efikamx.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/faraday/a320evb/config.mk b/board/efikamx/config.mk index b751d0d..6e90671 100644 --- a/board/faraday/a320evb/config.mk +++ b/board/efikamx/config.mk @@ -1,6 +1,8 @@ # -# (C) Copyright 2009 Faraday Technology -# Po-Yu Chuang <ratbert@faraday-tech.com> +# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. +# +# See file CREDITS for list of people who contributed to this +# project. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as @@ -18,18 +20,6 @@ # MA 02111-1307 USA # -# Faraday A320 board with FA526/FA626TE/ARM926EJ-S cpus -# -# see http://www.faraday-tech.com/ for more information - -# A320 has 1 bank of 64 MB DRAM -# -# 1000'0000 to 1400'0000 -# -# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 -# -# we load ourself to 13f8'0000 -# -# download area is 1200'0000 - -CONFIG_SYS_TEXT_BASE = 0x13f80000 +CONFIG_SYS_TEXT_BASE = 0x97800000 +IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg +ALL += $(obj)u-boot.imx diff --git a/board/efikamx/efikamx.c b/board/efikamx/efikamx.c new file mode 100644 index 0000000..4efbeaf --- /dev/null +++ b/board/efikamx/efikamx.c @@ -0,0 +1,689 @@ +/* + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/mx5x_pins.h> +#include <asm/arch/iomux.h> +#include <mxc_gpio.h> +#include <asm/errno.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/crm_regs.h> +#include <i2c.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <fsl_pmic.h> +#include <mc13892.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Compile-time error checking + */ +#ifndef CONFIG_MXC_SPI +#error "CONFIG_MXC_SPI not set, this is essential for board's operation!" +#endif + +/* + * Shared variables / local defines + */ +/* LED */ +#define EFIKAMX_LED_BLUE 0x1 +#define EFIKAMX_LED_GREEN 0x2 +#define EFIKAMX_LED_RED 0x4 + +void efikamx_toggle_led(uint32_t mask); + +/* Board revisions */ +#define EFIKAMX_BOARD_REV_11 0x1 +#define EFIKAMX_BOARD_REV_12 0x2 +#define EFIKAMX_BOARD_REV_13 0x3 +#define EFIKAMX_BOARD_REV_14 0x4 + +/* + * Board identification + */ +u32 get_efika_rev(void) +{ + u32 rev = 0; + /* + * Retrieve board ID: + * rev1.1: 1,1,1 + * rev1.2: 1,1,0 + * rev1.3: 1,0,1 + * rev1.4: 1,0,0 + */ + mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO); + mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), + MXC_GPIO_DIRECTION_OUT); + /* set to 1 in order to get correct value on board rev1.1 */ + mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), 1); + + mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS0, PAD_CTL_100K_PU); + mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), + MXC_GPIO_DIRECTION_IN); + rev |= (!!mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0))) << 0; + + mxc_request_iomux(MX51_PIN_NANDF_CS1, IOMUX_CONFIG_GPIO); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS1, PAD_CTL_100K_PU); + mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1), + MXC_GPIO_DIRECTION_IN); + rev |= (!!mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1))) << 1; + + mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_GPIO); + mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, PAD_CTL_100K_PU); + mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3), + MXC_GPIO_DIRECTION_IN); + rev |= (!!mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3))) << 2; + + return (~rev & 0x7) + 1; +} + +u32 get_board_rev(void) +{ + return get_cpu_rev() | (get_efika_rev() << 8); +} + +/* + * DRAM initialization + */ +int dram_init(void) +{ + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + PHYS_SDRAM_1_SIZE); + return 0; +} + +/* + * UART configuration + */ +static void setup_iomux_uart(void) +{ + unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | + PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH; + + mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST); + mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST); + mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad); + mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad); +} + +/* + * SPI configuration + */ +#ifdef CONFIG_MXC_SPI +static void setup_iomux_spi(void) +{ + /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */ + mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + + /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */ + mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + + /* Configure SS0 as a GPIO */ + mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_GPIO); + mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), + MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), 0); + + /* Configure SS1 as a GPIO */ + mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_GPIO); + mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), + MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), 1); + + /* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */ + mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, + PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); + + /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */ + mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); +} +#else +static inline void setup_iomux_spi(void) { } +#endif + +/* + * PMIC configuration + */ +#ifdef CONFIG_MXC_SPI +static void power_init(void) +{ + unsigned int val; + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; + + /* Write needed to Power Gate 2 register */ + val = pmic_reg_read(REG_POWER_MISC); + val &= ~PWGT2SPIEN; + pmic_reg_write(REG_POWER_MISC, val); + + /* Externally powered */ + val = pmic_reg_read(REG_CHARGE); + val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB; + pmic_reg_write(REG_CHARGE, val); + + /* power up the system first */ + pmic_reg_write(REG_POWER_MISC, PWUP); + + /* Set core voltage to 1.1V */ + val = pmic_reg_read(REG_SW_0); + val = (val & ~SWx_VOLT_MASK) | SWx_1_100V; + pmic_reg_write(REG_SW_0, val); + + /* Setup VCC (SW2) to 1.25 */ + val = pmic_reg_read(REG_SW_1); + val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; + pmic_reg_write(REG_SW_1, val); + + /* Setup 1V2_DIG1 (SW3) to 1.25 */ + val = pmic_reg_read(REG_SW_2); + val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; + pmic_reg_write(REG_SW_2, val); + udelay(50); + + /* Raise the core frequency to 800MHz */ + writel(0x0, &mxc_ccm->cacrr); + + /* Set switchers in Auto in NORMAL mode & STANDBY mode */ + /* Setup the switcher mode for SW1 & SW2*/ + val = pmic_reg_read(REG_SW_4); + val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) | + (SWMODE_MASK << SWMODE2_SHIFT))); + val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) | + (SWMODE_AUTO_AUTO << SWMODE2_SHIFT); + pmic_reg_write(REG_SW_4, val); + + /* Setup the switcher mode for SW3 & SW4 */ + val = pmic_reg_read(REG_SW_5); + val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) | + (SWMODE_MASK << SWMODE4_SHIFT))); + val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) | + (SWMODE_AUTO_AUTO << SWMODE4_SHIFT); + pmic_reg_write(REG_SW_5, val); + + /* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */ + val = pmic_reg_read(REG_SETTING_0); + val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK); + val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6; + pmic_reg_write(REG_SETTING_0, val); + + /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */ + val = pmic_reg_read(REG_SETTING_1); + val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK); + val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775; + pmic_reg_write(REG_SETTING_1, val); + + /* Configure VGEN3 and VCAM regulators to use external PNP */ + val = VGEN3CONFIG | VCAMCONFIG; + pmic_reg_write(REG_MODE_1, val); + udelay(200); + + /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ + val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG | + VVIDEOEN | VAUDIOEN | VSDEN; + pmic_reg_write(REG_MODE_1, val); + + val = pmic_reg_read(REG_POWER_CTL2); + val |= WDIRESET; + pmic_reg_write(REG_POWER_CTL2, val); + + udelay(2500); +} +#else +static inline void power_init(void) { } +#endif + +/* + * MMC configuration + */ +#ifdef CONFIG_FSL_ESDHC +struct fsl_esdhc_cfg esdhc_cfg[2] = { + {MMC_SDHC1_BASE_ADDR, 1}, + {MMC_SDHC2_BASE_ADDR, 1}, +}; + +int board_mmc_getcd(u8 *absent, struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + + if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) + *absent = mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0)); + else + *absent = mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8)); + + return 0; +} +int board_mmc_init(bd_t *bis) +{ + int ret; + + /* SDHC1 is used on all revisions, setup control pins first */ + mxc_request_iomux(MX51_PIN_GPIO1_0, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_GPIO1_0, + PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE | + PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU | + PAD_CTL_ODE_OPENDRAIN_NONE | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_request_iomux(MX51_PIN_GPIO1_1, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_GPIO1_1, + PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE | + PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE | + PAD_CTL_SRE_FAST); + + mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0), + MXC_GPIO_DIRECTION_IN); + mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1), + MXC_GPIO_DIRECTION_IN); + + /* Internal SDHC1 IOMUX + SDHC2 IOMUX on old boards */ + if (get_efika_rev() < EFIKAMX_BOARD_REV_12) { + /* SDHC1 IOMUX */ + mxc_request_iomux(MX51_PIN_SD1_CMD, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_SD1_CMD, + PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | + PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD1_CLK, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_SD1_CLK, + PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | + PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, + PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | + PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, + PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | + PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, + PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | + PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, + PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | + PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); + + /* SDHC2 IOMUX */ + mxc_request_iomux(MX51_PIN_SD2_CMD, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_SD2_CMD, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD2_CLK, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_SD2_CLK, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD2_DATA0, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_SD2_DATA0, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD2_DATA1, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_SD2_DATA1, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD2_DATA2, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_SD2_DATA2, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD2_DATA3, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_SD2_DATA3, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); + + /* SDHC2 Control lines IOMUX */ + mxc_request_iomux(MX51_PIN_GPIO1_7, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_GPIO1_7, + PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE | + PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU | + PAD_CTL_ODE_OPENDRAIN_NONE | + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); + mxc_request_iomux(MX51_PIN_GPIO1_8, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_GPIO1_8, + PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE | + PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE | + PAD_CTL_SRE_FAST); + + mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8), + MXC_GPIO_DIRECTION_IN); + mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7), + MXC_GPIO_DIRECTION_IN); + + ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]); + if (!ret) + ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]); + } else { /* New boards use only SDHC1 */ + /* SDHC1 IOMUX */ + mxc_request_iomux(MX51_PIN_SD1_CMD, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_SD1_CMD, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD1_CLK, + IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); + mxc_iomux_set_pad(MX51_PIN_SD1_CLK, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); + + mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, + PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); + + ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]); + } + return ret; +} +#endif + +/* + * ATA + */ +#ifdef CONFIG_MX51_PATA +#define ATA_PAD_CONFIG (PAD_CTL_DRV_HIGH | PAD_CTL_DRV_VOT_HIGH) +void setup_iomux_ata(void) +{ + mxc_request_iomux(MX51_PIN_NANDF_ALE, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_ALE, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_RE_B, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_RE_B, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_WE_B, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_WE_B, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_CLE, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_CLE, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_RB0, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_RB0, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_WP_B, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_WP_B, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_GPIO_NAND, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_GPIO_NAND, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_RB1, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_RB1, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D0, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D0, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D1, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D1, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D2, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D2, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D3, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D3, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D4, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D4, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D5, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D5, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D6, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D6, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D7, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D7, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D8, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D9, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D10, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D11, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D12, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D12, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D13, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D14, ATA_PAD_CONFIG); + mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT1); + mxc_iomux_set_pad(MX51_PIN_NANDF_D15, ATA_PAD_CONFIG); +} +#else +static inline void setup_iomux_ata(void) { } +#endif + +/* + * LED configuration + */ +void setup_iomux_led(void) +{ + /* Blue LED */ + mxc_request_iomux(MX51_PIN_CSI1_D9, IOMUX_CONFIG_ALT3); + mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), + MXC_GPIO_DIRECTION_OUT); + /* Green LED */ + mxc_request_iomux(MX51_PIN_CSI1_VSYNC, IOMUX_CONFIG_ALT3); + mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), + MXC_GPIO_DIRECTION_OUT); + /* Red LED */ + mxc_request_iomux(MX51_PIN_CSI1_HSYNC, IOMUX_CONFIG_ALT3); + mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), + MXC_GPIO_DIRECTION_OUT); +} + +void efikamx_toggle_led(uint32_t mask) +{ + mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), + mask & EFIKAMX_LED_BLUE); + mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), + mask & EFIKAMX_LED_GREEN); + mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), + mask & EFIKAMX_LED_RED); +} + +/* + * Board initialization + */ +static void init_drive_strength(void) +{ + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_DDR_INPUT_CMOS); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEADDR, PAD_CTL_PKE_ENABLE); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPKS, PAD_CTL_PUE_KEEPER); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPUS, PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A0, PAD_CTL_DRV_HIGH); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A1, PAD_CTL_DRV_HIGH); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_RAS, + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CAS, + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_PKE_ENABLE); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPKS, PAD_CTL_PUE_KEEPER); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR0, PAD_CTL_HYS_NONE); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR1, PAD_CTL_HYS_NONE); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR2, PAD_CTL_HYS_NONE); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR3, PAD_CTL_HYS_NONE); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B0, PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B1, PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B2, PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B4, PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPUS, PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_INMODE1, PAD_CTL_DDR_INPUT_CMOS); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B0, PAD_CTL_DRV_MEDIUM); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B1, PAD_CTL_DRV_MEDIUM); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B2, PAD_CTL_DRV_MEDIUM); + mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B4, PAD_CTL_DRV_MEDIUM); + + /* Setting pad options */ + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDWE, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE0, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE1, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCLK, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS0, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS1, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS2, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS3, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS0, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS1, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM0, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM1, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM2, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM3, + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); +} + +int board_early_init_f(void) +{ + init_drive_strength(); + + setup_iomux_uart(); + setup_iomux_spi(); + setup_iomux_led(); + + return 0; +} + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_MX51_LANGE51; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int board_late_init(void) +{ + setup_iomux_spi(); + + power_init(); + + setup_iomux_led(); + setup_iomux_ata(); + + efikamx_toggle_led(EFIKAMX_LED_BLUE); + + return 0; +} + +int checkboard(void) +{ + u32 system_rev = get_cpu_rev(); + u32 cause; + struct src *src_regs = (struct src *)SRC_BASE_ADDR; + + puts("Board: Efika MX "); + + switch (system_rev & 0xff) { + case CHIP_REV_3_0: + puts("3.0 ["); + break; + case CHIP_REV_2_5: + puts("2.5 ["); + break; + case CHIP_REV_2_0: + puts("2.0 ["); + break; + case CHIP_REV_1_1: + puts("1.1 ["); + break; + case CHIP_REV_1_0: + default: + puts("1.0 ["); + break; + } + + cause = src_regs->srsr; + switch (cause) { + case 0x0001: + puts("POR"); + break; + case 0x0009: + puts("RST"); + break; + case 0x0010: + case 0x0011: + puts("WDOG"); + break; + default: + printf("unknown 0x%x", cause); + } + puts("]\n"); + + return 0; +} diff --git a/board/efikamx/imximage.cfg b/board/efikamx/imximage.cfg new file mode 100644 index 0000000..6fe0ff9 --- /dev/null +++ b/board/efikamx/imximage.cfg @@ -0,0 +1,122 @@ +# +# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> +# +# BASED ON: imx51evk +# +# (C) Copyright 2009 +# Stefano Babic DENX Software Engineering sbabic@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not write to the Free Software +# Foundation Inc. 51 Franklin Street Fifth Floor Boston, +# MA 02110-1301 USA +# +# Refer docs/README.imxmage for more details about how-to configure +# and create imximage boot image +# +# The syntax is taken as close as possible with the kwbimage + +# Boot Device : one of +# spi, sd (the board has no nand neither onenand) +BOOT_FROM spi + +# Device Configuration Data (DCD) +# +# Each entry must have the format: +# Addr-type Address Value +# +# where: +# Addr-type register length (1,2 or 4 bytes) +# Address absolute address of the register +# value value to be stored in the register + +# Setting IOMUXC +DATA 4 0x73fa88a0 0x000 +DATA 4 0x73fa850c 0x20c5 +DATA 4 0x73fa8510 0x20c5 +DATA 4 0x73fa883c 0x5 +DATA 4 0x73fa8848 0x5 +DATA 4 0x73fa84b8 0xe7 +DATA 4 0x73fa84bc 0x45 +DATA 4 0x73fa84c0 0x45 +DATA 4 0x73fa84c4 0x45 +DATA 4 0x73fa84c8 0x45 +DATA 4 0x73fa8820 0x0 +DATA 4 0x73fa84a4 0x5 +DATA 4 0x73fa84a8 0x5 +DATA 4 0x73fa84ac 0xe5 +DATA 4 0x73fa84b0 0xe5 +DATA 4 0x73fa84b4 0xe5 +DATA 4 0x73fa84cc 0xe5 +DATA 4 0x73fa84d0 0xe4 + +DATA 4 0x73fa882c 0x4 +DATA 4 0x73fa88a4 0x4 +DATA 4 0x73fa88ac 0x4 +DATA 4 0x73fa88b8 0x4 + +# Setting DDR for micron +# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model +# CAS=3 BL=4 +# ESDCTL_ESDCTL0 +DATA 4 0x83fd9000 0x82a20000 +# ESDCTL_ESDCTL1 +DATA 4 0x83fd9008 0x82a20000 +# ESDCTL_ESDMISC +DATA 4 0x83fd9010 0xcaaaf6d0 +# ESDCTL_ESDCFG0 +DATA 4 0x83fd9004 0x3f3574aa +# ESDCTL_ESDCFG1 +DATA 4 0x83fd900c 0x3f3574aa + +# Init DRAM on CS0 +# ESDCTL_ESDSCR +DATA 4 0x83fd9014 0x04008008 +DATA 4 0x83fd9014 0x0000801a +DATA 4 0x83fd9014 0x0000801b +DATA 4 0x83fd9014 0x00448019 +DATA 4 0x83fd9014 0x07328018 +DATA 4 0x83fd9014 0x04008008 +DATA 4 0x83fd9014 0x00008010 +DATA 4 0x83fd9014 0x00008010 +DATA 4 0x83fd9014 0x06328018 +DATA 4 0x83fd9014 0x03808019 +DATA 4 0x83fd9014 0x00408019 +DATA 4 0x83fd9014 0x00008000 + +# Init DRAM on CS1 +DATA 4 0x83fd9014 0x0400800c +DATA 4 0x83fd9014 0x0000801e +DATA 4 0x83fd9014 0x0000801f +DATA 4 0x83fd9014 0x0000801d +DATA 4 0x83fd9014 0x0732801c +DATA 4 0x83fd9014 0x0400800c +DATA 4 0x83fd9014 0x00008014 +DATA 4 0x83fd9014 0x00008014 +DATA 4 0x83fd9014 0x0632801c +DATA 4 0x83fd9014 0x0380801d +DATA 4 0x83fd9014 0x0040801d +DATA 4 0x83fd9014 0x00008004 + +# Write to CTL0 +DATA 4 0x83fd9000 0xb2a20000 +# Write to CTL1 +DATA 4 0x83fd9008 0xb2a20000 +# ESDMISC +DATA 4 0x83fd9010 0x000ad6d0 +#ESDCTL_ESDCDLYGD +DATA 4 0x83fd9034 0x90000000 +DATA 4 0x83fd9014 0x00000000 diff --git a/board/faraday/a320evb/a320evb.c b/board/faraday/a320evb/a320evb.c index 85b11b9..b9343e4 100644 --- a/board/faraday/a320evb/a320evb.c +++ b/board/faraday/a320evb/a320evb.c @@ -46,8 +46,7 @@ int dram_init(void) actual_size = get_ram_size((void *)sdram_base, expected_size); - gd->bd->bi_dram[0].start = sdram_base; - gd->bd->bi_dram[0].size = actual_size; + gd->ram_size = actual_size; if (expected_size != actual_size) printf("Warning: Only %lu of %lu MiB SDRAM is working\n", diff --git a/board/freescale/mx35pdk/Makefile b/board/freescale/mx35pdk/Makefile new file mode 100644 index 0000000..b4a60d6 --- /dev/null +++ b/board/freescale/mx35pdk/Makefile @@ -0,0 +1,49 @@ +# +# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> +# +# (C) Copyright 2008-2009 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := mx35pdk.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mx35pdk/lowlevel_init.S b/board/freescale/mx35pdk/lowlevel_init.S new file mode 100644 index 0000000..9b0f1b5 --- /dev/null +++ b/board/freescale/mx35pdk/lowlevel_init.S @@ -0,0 +1,363 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/asm-offsets.h> +#include "mx35pdk.h" + +/* + * return soc version + * 0x10: TO1 + * 0x20: TO2 + * 0x30: TO3 + */ +.macro check_soc_version ret, tmp + ldr \tmp, =IIM_BASE_ADDR + ldr \ret, [\tmp, #IIM_SREV] + cmp \ret, #0x00 + moveq \tmp, #ROMPATCH_REV + ldreq \ret, [\tmp] + moveq \ret, \ret, lsl #4 + addne \ret, \ret, #0x10 +.endm + +/* + * AIPS setup - Only setup MPROTx registers. + * The PACR default values are good. + */ +.macro init_aips + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + ldr r0, =AIPS1_BASE_ADDR + ldr r1, =AIPS_MPR_CONFIG + str r1, [r0, #0x00] + str r1, [r0, #0x04] + ldr r0, =AIPS2_BASE_ADDR + str r1, [r0, #0x00] + str r1, [r0, #0x04] + + /* + * Clear the on and off peripheral modules Supervisor Protect bit + * for SDMA to access them. Did not change the AIPS control registers + * (offset 0x20) access type + */ + ldr r0, =AIPS1_BASE_ADDR + ldr r1, =AIPS_OPACR_CONFIG + str r1, [r0, #0x40] + str r1, [r0, #0x44] + str r1, [r0, #0x48] + str r1, [r0, #0x4C] + str r1, [r0, #0x50] + ldr r0, =AIPS2_BASE_ADDR + str r1, [r0, #0x40] + str r1, [r0, #0x44] + str r1, [r0, #0x48] + str r1, [r0, #0x4C] + str r1, [r0, #0x50] +.endm + +/* MAX (Multi-Layer AHB Crossbar Switch) setup */ +.macro init_max + ldr r0, =MAX_BASE_ADDR + /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ + ldr r1, =MAX_MPR_CONFIG + str r1, [r0, #0x000] /* for S0 */ + str r1, [r0, #0x100] /* for S1 */ + str r1, [r0, #0x200] /* for S2 */ + str r1, [r0, #0x300] /* for S3 */ + str r1, [r0, #0x400] /* for S4 */ + /* SGPCR - always park on last master */ + ldr r1, =MAX_SGPCR_CONFIG + str r1, [r0, #0x010] /* for S0 */ + str r1, [r0, #0x110] /* for S1 */ + str r1, [r0, #0x210] /* for S2 */ + str r1, [r0, #0x310] /* for S3 */ + str r1, [r0, #0x410] /* for S4 */ + /* MGPCR - restore default values */ + ldr r1, =MAX_MGPCR_CONFIG + str r1, [r0, #0x800] /* for M0 */ + str r1, [r0, #0x900] /* for M1 */ + str r1, [r0, #0xA00] /* for M2 */ + str r1, [r0, #0xB00] /* for M3 */ + str r1, [r0, #0xC00] /* for M4 */ + str r1, [r0, #0xD00] /* for M5 */ +.endm + +/* M3IF setup */ +.macro init_m3if + /* Configure M3IF registers */ + ldr r1, =M3IF_BASE_ADDR + /* + * M3IF Control Register (M3IFCTL) + * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 + * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 + * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 + * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 + * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 + * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 + * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 + * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 + * ------------ + * 0x00000040 + */ + ldr r0, =M3IF_CONFIG + str r0, [r1] /* M3IF control reg */ +.endm + +/* CPLD on CS5 setup */ +.macro init_debug_board + ldr r0, =DBG_BASE_ADDR + ldr r1, =DBG_CSCR_U_CONFIG + str r1, [r0, #0x00] + ldr r1, =DBG_CSCR_L_CONFIG + str r1, [r0, #0x04] + ldr r1, =DBG_CSCR_A_CONFIG + str r1, [r0, #0x08] +.endm + +/* clock setup */ +.macro init_clock + ldr r0, =CCM_BASE_ADDR + + /* default CLKO to 1/32 of the ARM core*/ + ldr r1, [r0, #CLKCTL_COSR] + bic r1, r1, #0x00000FF00 + bic r1, r1, #0x0000000FF + mov r2, #0x00006C00 + add r2, r2, #0x67 + orr r1, r1, r2 + str r1, [r0, #CLKCTL_COSR] + + ldr r2, =CCM_CCMR_CONFIG + str r2, [r0, #CLKCTL_CCMR] + + check_soc_version r1, r2 + cmp r1, #CHIP_REV_2_0 + ldrhs r3, =CCM_MPLL_532_HZ + bhs 1f + ldr r2, [r0, #CLKCTL_PDR0] + tst r2, #CLKMODE_CONSUMER + ldrne r3, =CCM_MPLL_532_HZ /* consumer path*/ + ldreq r3, =CCM_MPLL_399_HZ /* auto path*/ +1: + str r3, [r0, #CLKCTL_MPCTL] + + ldr r1, =CCM_PPLL_300_HZ + str r1, [r0, #CLKCTL_PPCTL] + + ldr r1, =CCM_PDR0_CONFIG + bic r1, r1, #0x800000 + str r1, [r0, #CLKCTL_PDR0] + + ldr r1, [r0, #CLKCTL_CGR0] + orr r1, r1, #0x0C300000 + str r1, [r0, #CLKCTL_CGR0] + + ldr r1, [r0, #CLKCTL_CGR1] + orr r1, r1, #0x00000C00 + orr r1, r1, #0x00000003 + str r1, [r0, #CLKCTL_CGR1] +.endm + +.macro setup_sdram + ldr r0, =ESDCTL_BASE_ADDR + mov r3, #0x2000 + str r3, [r0, #0x0] + str r3, [r0, #0x8] + + /*ip(r12) has used to save lr register in upper calling*/ + mov fp, lr + + mov r5, #0x00 + mov r2, #0x00 + mov r1, #CSD0_BASE_ADDR + bl setup_sdram_bank + cmp r3, #0x0 + orreq r5, r5, #1 + eorne r2, r2, #0x1 + blne setup_sdram_bank + + mov lr, fp + +1: + ldr r3, =ESDCTL_DELAY_LINE5 + str r3, [r0, #0x30] +.endm + +.globl lowlevel_init +lowlevel_init: + mov r10, lr + + mrc 15, 0, r1, c1, c0, 0 + + mrc 15, 0, r0, c1, c0, 1 + orr r0, r0, #7 + mcr 15, 0, r0, c1, c0, 1 + orr r1, r1, #(1<<11) + + /* Set unaligned access enable */ + orr r1, r1, #(1<<22) + + /* Set low int latency enable */ + orr r1, r1, #(1<<21) + + mcr 15, 0, r1, c1, c0, 0 + + mov r0, #0 + + /* Set branch prediction enable */ + mcr 15, 0, r0, c15, c2, 4 + + mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */ + mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */ + mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */ + + /* + * initializes very early AIPS + * Then it also initializes Multi-Layer AHB Crossbar Switch, + * M3IF + * Also setup the Peripheral Port Remap register inside the core + */ + ldr r0, =0x40000015 /* start from AIPS 2GB region */ + mcr p15, 0, r0, c15, c2, 4 + + init_aips + + init_max + + init_m3if + + init_clock + init_debug_board + + cmp pc, #PHYS_SDRAM_1 + blo init_sdram_start + cmp pc, #(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE) + blo skip_sdram_setup + +init_sdram_start: + /*init_sdram*/ + setup_sdram + +skip_sdram_setup: + mov lr, r10 + mov pc, lr + + +/* + * r0: ESDCTL control base, r1: sdram slot base + * r2: DDR type(0:DDR2, 1:MDDR) r3, r4:working base + */ +setup_sdram_bank: + mov r3, #0xE + tst r2, #0x1 + orreq r3, r3, #0x300 /*DDR2*/ + str r3, [r0, #0x10] + bic r3, r3, #0x00A + str r3, [r0, #0x10] + beq 2f + + mov r3, #0x20000 +1: subs r3, r3, #1 + bne 1b + +2: tst r2, #0x1 + ldreq r3, =ESDCTL_DDR2_CONFIG + ldrne r3, =ESDCTL_MDDR_CONFIG + cmp r1, #CSD1_BASE_ADDR + strlo r3, [r0, #0x4] + strhs r3, [r0, #0xC] + + ldr r3, =ESDCTL_0x92220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + mov r3, #0xDA + ldr r4, =ESDCTL_PRECHARGE + strb r3, [r1, r4] + + tst r2, #0x1 + bne skip_set_mode + + cmp r1, #CSD1_BASE_ADDR + ldr r3, =ESDCTL_0xB2220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + mov r3, #0xDA + ldr r4, =ESDCTL_DDR2_EMR2 + strb r3, [r1, r4] + ldr r4, =ESDCTL_DDR2_EMR3 + strb r3, [r1, r4] + ldr r4, =ESDCTL_DDR2_EN_DLL + strb r3, [r1, r4] + ldr r4, =ESDCTL_DDR2_RESET_DLL + strb r3, [r1, r4] + + ldr r3, =ESDCTL_0x92220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + mov r3, #0xDA + ldr r4, =ESDCTL_PRECHARGE + strb r3, [r1, r4] + +skip_set_mode: + cmp r1, #CSD1_BASE_ADDR + ldr r3, =ESDCTL_0xA2220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + mov r3, #0xDA + strb r3, [r1] + strb r3, [r1] + + ldr r3, =ESDCTL_0xB2220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + tst r2, #0x1 + ldreq r4, =ESDCTL_DDR2_MR + ldrne r4, =ESDCTL_MDDR_MR + mov r3, #0xDA + strb r3, [r1, r4] + ldreq r4, =ESDCTL_DDR2_OCD_DEFAULT + streqb r3, [r1, r4] + ldreq r4, =ESDCTL_DDR2_EN_DLL + ldrne r4, =ESDCTL_MDDR_EMR + strb r3, [r1, r4] + + cmp r1, #CSD1_BASE_ADDR + ldr r3, =ESDCTL_0x82228080 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + + tst r2, #0x1 + moveq r4, #0x20000 + movne r4, #0x200 +1: subs r4, r4, #1 + bne 1b + + str r3, [r1, #0x100] + ldr r4, [r1, #0x100] + cmp r3, r4 + movne r3, #1 + moveq r3, #0 + + mov pc, lr diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c new file mode 100644 index 0000000..da926e5 --- /dev/null +++ b/board/freescale/mx35pdk/mx35pdk.c @@ -0,0 +1,297 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/mx35_pins.h> +#include <asm/arch/iomux.h> +#include <i2c.h> +#include <fsl_pmic.h> +#include <mc9sdz60.h> +#include <mc13892.h> +#include <linux/types.h> +#include <mxc_gpio.h> +#include <asm/arch/sys_proto.h> +#include <netdev.h> + +#ifndef BOARD_LATE_INIT +#error "BOARD_LATE_INIT must be set for this board" +#endif + +#ifndef CONFIG_BOARD_EARLY_INIT_F +#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board" +#endif + +#define mdelay(n) ({unsigned long msec = (n); while (msec--) udelay(1000); }) + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, + PHYS_SDRAM_1_SIZE); + + return 0; +} + +static void setup_iomux_i2c(void) +{ + int pad; + + /* setup pins for I2C1 */ + mxc_request_iomux(MX35_PIN_I2C1_CLK, MUX_CONFIG_SION); + mxc_request_iomux(MX35_PIN_I2C1_DAT, MUX_CONFIG_SION); + + pad = (PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE \ + | PAD_CTL_PUE_PUD | PAD_CTL_ODE_OpenDrain); + + mxc_iomux_set_pad(MX35_PIN_I2C1_CLK, pad); + mxc_iomux_set_pad(MX35_PIN_I2C1_DAT, pad); +} + + +static void setup_iomux_spi(void) +{ + mxc_request_iomux(MX35_PIN_CSPI1_MOSI, MUX_CONFIG_SION); + mxc_request_iomux(MX35_PIN_CSPI1_MISO, MUX_CONFIG_SION); + mxc_request_iomux(MX35_PIN_CSPI1_SS0, MUX_CONFIG_SION); + mxc_request_iomux(MX35_PIN_CSPI1_SS1, MUX_CONFIG_SION); + mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION); +} + +static void setup_iomux_fec(void) +{ + int pad; + + /* setup pins for FEC */ + mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC); + + pad = (PAD_CTL_DRV_3_3V | PAD_CTL_PUE_PUD | PAD_CTL_ODE_CMOS | \ + PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW); + + mxc_iomux_set_pad(MX35_PIN_FEC_TX_CLK, pad | PAD_CTL_HYS_SCHMITZ | \ + PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_RX_CLK, pad | PAD_CTL_HYS_SCHMITZ | \ + PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_RX_DV, pad | PAD_CTL_HYS_SCHMITZ | \ + PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_COL, pad | PAD_CTL_HYS_SCHMITZ | \ + PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_RDATA0, pad | PAD_CTL_HYS_SCHMITZ | \ + PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_TDATA0, pad | PAD_CTL_HYS_CMOS | \ + PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_TX_EN, pad | PAD_CTL_HYS_CMOS | \ + PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_MDC, pad | PAD_CTL_HYS_CMOS | \ + PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_MDIO, pad | PAD_CTL_HYS_SCHMITZ | \ + PAD_CTL_PKE_ENABLE | PAD_CTL_22K_PU); + mxc_iomux_set_pad(MX35_PIN_FEC_TX_ERR, pad | PAD_CTL_HYS_CMOS | \ + PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_RX_ERR, pad | PAD_CTL_HYS_SCHMITZ | \ + PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_CRS, pad | PAD_CTL_HYS_SCHMITZ | \ + PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_RDATA1, pad | PAD_CTL_HYS_SCHMITZ | \ + PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_TDATA1, pad | PAD_CTL_HYS_CMOS | \ + PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_RDATA2, pad | PAD_CTL_HYS_SCHMITZ | \ + PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_TDATA2, pad | PAD_CTL_HYS_CMOS | \ + PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_RDATA3, pad | PAD_CTL_HYS_SCHMITZ | \ + PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX35_PIN_FEC_TDATA3, pad | PAD_CTL_HYS_CMOS | \ + PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); +} + +int board_early_init_f(void) +{ + struct ccm_regs *ccm = + (struct ccm_regs *)IMX_CCM_BASE; + + /* enable clocks */ + writel(readl(&ccm->cgr0) | + MXC_CCM_CGR0_EMI_MASK | + MXC_CCM_CGR0_EDI0_MASK | + MXC_CCM_CGR0_EPIT1_MASK, + &ccm->cgr0); + + writel(readl(&ccm->cgr1) | + MXC_CCM_CGR1_FEC_MASK | + MXC_CCM_CGR1_GPIO1_MASK | + MXC_CCM_CGR1_GPIO2_MASK | + MXC_CCM_CGR1_GPIO3_MASK | + MXC_CCM_CGR1_I2C1_MASK | + MXC_CCM_CGR1_I2C2_MASK | + MXC_CCM_CGR1_IPU_MASK, + &ccm->cgr1); + + /* Setup NAND */ + __raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr); + + setup_iomux_i2c(); + setup_iomux_fec(); + setup_iomux_spi(); + + return 0; +} + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_MX35_3DS; /* board id for linux */ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +static inline int pmic_detect(void) +{ + int id; + + id = pmic_reg_read(REG_IDENTIFICATION); + + id = (id >> 6) & 0x7; + if (id == 0x7) + return 1; + return 0; +} + +u32 get_board_rev(void) +{ + int rev; + + rev = pmic_detect(); + + return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8; +} + +int board_late_init(void) +{ + u8 val; + u32 pmic_val; + + if (pmic_detect()) { + mxc_request_iomux(MX35_PIN_WATCHDOG_RST, MUX_CONFIG_SION | + MUX_CONFIG_ALT1); + + pmic_val = pmic_reg_read(REG_SETTING_0); + pmic_reg_write(REG_SETTING_0, pmic_val | VO_1_30V | VO_1_50V); + pmic_val = pmic_reg_read(REG_MODE_0); + pmic_reg_write(REG_MODE_0, pmic_val | VGEN3EN); + + mxc_request_iomux(MX35_PIN_COMPARE, MUX_CONFIG_GPIO); + mxc_iomux_set_input(MUX_IN_GPIO1_IN_5, INPUT_CTL_PATH0); + + mxc_gpio_direction(37, MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(37, 1); + } + + val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04; + mc9sdz60_reg_write(MC9SDZ60_REG_GPIO_1, val); + mdelay(200); + + val = mc9sdz60_reg_read(MC9SDZ60_REG_RESET_1) & 0x7F; + mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val); + mdelay(200); + + val |= 0x80; + mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val); + + return 0; +} + +int checkboard(void) +{ + struct ccm_regs *ccm = + (struct ccm_regs *)IMX_CCM_BASE; + u32 cpu_rev = get_cpu_rev(); + + /* + * Be sure that I2C is initialized to check + * the board revision + */ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + /* Print board revision */ + printf("Board: MX35 PDK %d.0 ", ((get_board_rev() >> 8) + 1) & 0x0F); + + /* Print CPU revision */ + printf("i.MX35 %d.%d [", (cpu_rev & 0xF0) >> 4, cpu_rev & 0x0F); + + switch (readl(&ccm->rcsr) & 0x0F) { + case 0x0000: + puts("POR"); + break; + case 0x0002: + puts("JTAG"); + break; + case 0x0004: + puts("RST"); + break; + case 0x0008: + puts("WDT"); + break; + default: + puts("unknown"); + } + puts("]\n"); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + int rc = -ENODEV; +#if defined(CONFIG_SMC911X) + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif + + cpu_eth_init(bis); + + return rc; +} diff --git a/board/freescale/mx35pdk/mx35pdk.h b/board/freescale/mx35pdk/mx35pdk.h new file mode 100644 index 0000000..409aeb2 --- /dev/null +++ b/board/freescale/mx35pdk/mx35pdk.h @@ -0,0 +1,101 @@ +/* + * + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * (C) Copyright 2008-2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __BOARD_MX35_3STACK_H +#define __BOARD_MX35_3STACK_H + +#define AIPS_MPR_CONFIG 0x77777777 +#define AIPS_OPACR_CONFIG 0x00000000 + +/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ +#define MAX_MPR_CONFIG 0x00302154 +/* SGPCR - always park on last master */ +#define MAX_SGPCR_CONFIG 0x00000010 +/* MGPCR - restore default values */ +#define MAX_MGPCR_CONFIG 0x00000000 + +/* + * M3IF Control Register (M3IFCTL) + * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 + * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 + * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 + * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 + * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 + * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 + * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 + * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 + * ------------ + * 0x00000040 + */ +#define M3IF_CONFIG 0x00000040 + +#define DBG_BASE_ADDR WEIM_CTRL_CS5 +#define DBG_CSCR_U_CONFIG 0x0000D843 +#define DBG_CSCR_L_CONFIG 0x22252521 +#define DBG_CSCR_A_CONFIG 0x22220A00 + +#define CCM_CCMR_CONFIG 0x003F4208 +#define CCM_PDR0_CONFIG 0x00801000 + +#define PLL_BRM_OFFSET 31 +#define PLL_PD_OFFSET 26 +#define PLL_MFD_OFFSET 16 +#define PLL_MFI_OFFSET 10 + +#define _PLL_BRM(x) ((x) << PLL_BRM_OFFSET) +#define _PLL_PD(x) (((x) - 1) << PLL_PD_OFFSET) +#define _PLL_MFD(x) (((x) - 1) << PLL_MFD_OFFSET) +#define _PLL_MFI(x) ((x) << PLL_MFI_OFFSET) +#define _PLL_MFN(x) (x) +#define _PLL_SETTING(brm, pd, mfd, mfi, mfn) \ + (_PLL_BRM(brm) | _PLL_PD(pd) | _PLL_MFD(mfd) | _PLL_MFI(mfi) |\ + _PLL_MFN(mfn)) + +#define CCM_MPLL_532_HZ _PLL_SETTING(1, 1, 12, 11, 1) +#define CCM_MPLL_399_HZ _PLL_SETTING(0, 1, 16, 8, 5) +#define CCM_PPLL_300_HZ _PLL_SETTING(0, 1, 4, 6, 1) + +/* MEMORY SETTING */ +#define ESDCTL_0x92220000 0x92220000 +#define ESDCTL_0xA2220000 0xA2220000 +#define ESDCTL_0xB2220000 0xB2220000 +#define ESDCTL_0x82228080 0x82228080 + +#define ESDCTL_PRECHARGE 0x00000400 + +#define ESDCTL_MDDR_CONFIG 0x007FFC3F +#define ESDCTL_MDDR_MR 0x00000033 +#define ESDCTL_MDDR_EMR 0x02000000 + +#define ESDCTL_DDR2_CONFIG 0x007FFC3F +#define ESDCTL_DDR2_EMR2 0x04000000 +#define ESDCTL_DDR2_EMR3 0x06000000 +#define ESDCTL_DDR2_EN_DLL 0x02000400 +#define ESDCTL_DDR2_RESET_DLL 0x00000333 +#define ESDCTL_DDR2_MR 0x00000233 +#define ESDCTL_DDR2_OCD_DEFAULT 0x02000780 + +#define ESDCTL_DELAY_LINE5 0x00F49F00 +#endif /* __BOARD_MX35_3STACK_H */ diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 2160d5a..02a765d 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -198,17 +198,17 @@ static void power_init(void) /* Set core voltage to 1.1V */ val = pmic_reg_read(REG_SW_0); - val = (val & (~0x1F)) | 0x14; + val = (val & ~SWx_VOLT_MASK) | SWx_1_100V; pmic_reg_write(REG_SW_0, val); /* Setup VCC (SW2) to 1.25 */ val = pmic_reg_read(REG_SW_1); - val = (val & (~0x1F)) | 0x1A; + val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; pmic_reg_write(REG_SW_1, val); /* Setup 1V2_DIG1 (SW3) to 1.25 */ val = pmic_reg_read(REG_SW_2); - val = (val & (~0x1F)) | 0x1A; + val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; pmic_reg_write(REG_SW_2, val); udelay(50); @@ -399,6 +399,14 @@ int board_mmc_init(bd_t *bis) } #endif +int board_early_init_f(void) +{ + setup_iomux_uart(); + setup_iomux_fec(); + + return 0; +} + int board_init(void) { system_rev = get_cpu_rev(); @@ -407,9 +415,6 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - setup_iomux_uart(); - setup_iomux_fec(); - return 0; } diff --git a/board/freescale/mx53evk/Makefile b/board/freescale/mx53evk/Makefile new file mode 100644 index 0000000..6b820f4 --- /dev/null +++ b/board/freescale/mx53evk/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> +# +# (C) Copyright 2010 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := mx53evk.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mx53evk/config.mk b/board/freescale/mx53evk/config.mk new file mode 100644 index 0000000..0e60454 --- /dev/null +++ b/board/freescale/mx53evk/config.mk @@ -0,0 +1,24 @@ +# +# Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg +ALL += $(obj)u-boot.imx diff --git a/board/freescale/mx53evk/imximage.cfg b/board/freescale/mx53evk/imximage.cfg new file mode 100644 index 0000000..dd7528c --- /dev/null +++ b/board/freescale/mx53evk/imximage.cfg @@ -0,0 +1,112 @@ +# +# (C Copyright 2009 +# Stefano Babic DENX Software Engineering sbabic@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not write to the Free Software +# Foundation Inc. 51 Franklin Street Fifth Floor Boston, +# MA 02110-1301 USA +# +# Refer docs/README.imxmage for more details about how-to configure +# and create imximage boot image +# +# The syntax is taken as close as possible with the kwbimage + +# image version + +IMAGE_VERSION 2 + +# Boot Device : one of +# spi, sd (the board has no nand neither onenand) + +BOOT_FROM sd + +# Device Configuration Data (DCD) +# +# Each entry must have the format: +# Addr-type Address Value +# +# where: +# Addr-type register length (1,2 or 4 bytes) +# Address absolute address of the register +# value value to be stored in the register + +# Setting IOMUXC +DATA 4 0x53fa8554 0x00200000 +DATA 4 0x53fa8560 0x00200000 +DATA 4 0x53fa8594 0x00200000 +DATA 4 0x53fa8584 0x00200000 +DATA 4 0x53fa8558 0x00200040 +DATA 4 0x53fa8568 0x00200040 +DATA 4 0x53fa8590 0x00200040 +DATA 4 0x53fa857c 0x00200040 +DATA 4 0x53fa8564 0x00200040 +DATA 4 0x53fa8580 0x00200040 +DATA 4 0x53fa8570 0x00200000 +DATA 4 0x53fa8578 0x00200000 +DATA 4 0x53fa872c 0x00200000 +DATA 4 0x53fa8728 0x00200000 +DATA 4 0x53fa871c 0x00200000 +DATA 4 0x53fa8718 0x00200000 +DATA 4 0x53fa8574 0x00280000 +DATA 4 0x53fa8588 0x00280000 +DATA 4 0x53fa86f0 0x00280000 +DATA 4 0x53fa8720 0x00280000 +DATA 4 0x53fa86fc 0x00000000 +DATA 4 0x53fa86f4 0x00000200 +DATA 4 0x53fa8714 0x00000000 +DATA 4 0x53fa8724 0x06000000 +DATA 4 0x63fd9088 0x34333936 +DATA 4 0x63fd9090 0x49434942 +DATA 4 0x63fd90F8 0x00000800 +DATA 4 0x63fd907c 0x01350138 +DATA 4 0x63fd9080 0x01380139 +DATA 4 0x63fd9018 0x00001710 +DATA 4 0x63fd9000 0xc4110000 +DATA 4 0x63fd900C 0x4d5122d2 +DATA 4 0x63fd9010 0x92d18a22 +DATA 4 0x63fd9014 0x00c70092 +DATA 4 0x63fd902c 0x000026d2 +DATA 4 0x63fd9030 0x009f000e +DATA 4 0x63fd9008 0x12272000 +DATA 4 0x63fd9004 0x00030012 +DATA 4 0x63fd901c 0x04008010 +DATA 4 0x63fd901c 0x00008032 +DATA 4 0x63fd901c 0x00008033 +DATA 4 0x63fd901c 0x00008031 +DATA 4 0x63fd901c 0x0b5280b0 +DATA 4 0x63fd901c 0x04008010 +DATA 4 0x63fd901c 0x00008020 +DATA 4 0x63fd901c 0x00008020 +DATA 4 0x63fd901c 0x0a528030 +DATA 4 0x63fd901c 0x03c68031 +DATA 4 0x63fd901c 0x00448031 +DATA 4 0x63fd901c 0x04008018 +DATA 4 0x63fd901c 0x0000803a +DATA 4 0x63fd901c 0x0000803b +DATA 4 0x63fd901c 0x00008039 +DATA 4 0x63fd901c 0x0b528138 +DATA 4 0x63fd901c 0x04008018 +DATA 4 0x63fd901c 0x00008028 +DATA 4 0x63fd901c 0x00008028 +DATA 4 0x63fd901c 0x0a528038 +DATA 4 0x63fd901c 0x03c68039 +DATA 4 0x63fd901c 0x00448039 +DATA 4 0x63fd9020 0x00005800 +DATA 4 0x63fd9058 0x00033335 +DATA 4 0x63fd901c 0x00000000 +DATA 4 0x63fd9040 0x04b80003 +DATA 4 0x53fa8004 0x00194005 diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c new file mode 100644 index 0000000..e71701b --- /dev/null +++ b/board/freescale/mx53evk/mx53evk.c @@ -0,0 +1,397 @@ +/* + * (C) Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/mx5x_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/iomux.h> +#include <asm/errno.h> +#include <netdev.h> +#include <i2c.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <fsl_pmic.h> +#include <mxc_gpio.h> +#include <mc13892.h> + +DECLARE_GLOBAL_DATA_PTR; + +u32 get_board_rev(void) +{ + return get_cpu_rev(); +} + +int dram_init(void) +{ + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + PHYS_SDRAM_1_SIZE); + return 0; +} + +static void setup_iomux_uart(void) +{ + /* UART1 RXD */ + mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX53_PIN_CSI0_D11, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | + PAD_CTL_ODE_OPENDRAIN_ENABLE); + mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1); + + /* UART1 TXD */ + mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2); + mxc_iomux_set_pad(MX53_PIN_CSI0_D10, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | + PAD_CTL_ODE_OPENDRAIN_ENABLE); +} + +static void setup_i2c(unsigned int port_number) +{ + switch (port_number) { + case 0: + /* i2c1 SDA */ + mxc_request_iomux(MX53_PIN_CSI0_D8, + IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); + mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT, + INPUT_CTL_PATH0); + mxc_iomux_set_pad(MX53_PIN_CSI0_D8, + PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | + PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | + PAD_CTL_ODE_OPENDRAIN_ENABLE); + /* i2c1 SCL */ + mxc_request_iomux(MX53_PIN_CSI0_D9, + IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); + mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT, + INPUT_CTL_PATH0); + mxc_iomux_set_pad(MX53_PIN_CSI0_D9, + PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | + PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | + PAD_CTL_ODE_OPENDRAIN_ENABLE); + break; + case 1: + /* i2c2 SDA */ + mxc_request_iomux(MX53_PIN_KEY_ROW3, + IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION); + mxc_iomux_set_input(MX53_I2C2_IPP_SDA_IN_SELECT_INPUT, + INPUT_CTL_PATH0); + mxc_iomux_set_pad(MX53_PIN_KEY_ROW3, + PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | + PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | + PAD_CTL_ODE_OPENDRAIN_ENABLE); + + /* i2c2 SCL */ + mxc_request_iomux(MX53_PIN_KEY_COL3, + IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION); + mxc_iomux_set_input(MX53_I2C2_IPP_SCL_IN_SELECT_INPUT, + INPUT_CTL_PATH0); + mxc_iomux_set_pad(MX53_PIN_KEY_COL3, + PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | + PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | + PAD_CTL_ODE_OPENDRAIN_ENABLE); + break; + default: + printf("Warning: Wrong I2C port number\n"); + break; + } +} + +void power_init(void) +{ + unsigned int val; + + /* Set VDDA to 1.25V */ + val = pmic_reg_read(REG_SW_2); + val &= ~SWX_OUT_MASK; + val |= SWX_OUT_1_25; + pmic_reg_write(REG_SW_2, val); + + /* + * Need increase VCC and VDDA to 1.3V + * according to MX53 IC TO2 datasheet. + */ + if (is_soc_rev(CHIP_REV_2_0) == 0) { + /* Set VCC to 1.3V for TO2 */ + val = pmic_reg_read(REG_SW_1); + val &= ~SWX_OUT_MASK; + val |= SWX_OUT_1_30; + pmic_reg_write(REG_SW_1, val); + + /* Set VDDA to 1.3V for TO2 */ + val = pmic_reg_read(REG_SW_2); + val &= ~SWX_OUT_MASK; + val |= SWX_OUT_1_30; + pmic_reg_write(REG_SW_2, val); + } +} + +static void setup_iomux_fec(void) +{ + /*FEC_MDIO*/ + mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX53_PIN_FEC_MDIO, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE); + mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1); + + /*FEC_MDC*/ + mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH); + + /* FEC RXD1 */ + mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, + PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); + + /* FEC RXD0 */ + mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, + PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); + + /* FEC TXD1 */ + mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH); + + /* FEC TXD0 */ + mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH); + + /* FEC TX_EN */ + mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH); + + /* FEC TX_CLK */ + mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, + PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); + + /* FEC RX_ER */ + mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, + PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); + + /* FEC CRS */ + mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0); + mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, + PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); +} + +#ifdef CONFIG_FSL_ESDHC +struct fsl_esdhc_cfg esdhc_cfg[2] = { + {MMC_SDHC1_BASE_ADDR, 1}, + {MMC_SDHC3_BASE_ADDR, 1}, +}; + +int board_mmc_getcd(u8 *cd, struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + + if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) + *cd = mxc_gpio_get(77); /*GPIO3_13*/ + else + *cd = mxc_gpio_get(75); /*GPIO3_11*/ + + return 0; +} + +int board_mmc_init(bd_t *bis) +{ + u32 index; + s32 status = 0; + + for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { + switch (index) { + case 0: + mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX53_PIN_SD1_DATA0, + IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX53_PIN_SD1_DATA1, + IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX53_PIN_SD1_DATA2, + IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX53_PIN_SD1_DATA3, + IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX53_PIN_EIM_DA13, + IOMUX_CONFIG_ALT1); + + mxc_iomux_set_pad(MX53_PIN_SD1_CMD, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX53_PIN_SD1_CLK, + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | + PAD_CTL_DRV_HIGH); + mxc_iomux_set_pad(MX53_PIN_SD1_DATA0, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + mxc_iomux_set_pad(MX53_PIN_SD1_DATA1, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + mxc_iomux_set_pad(MX53_PIN_SD1_DATA2, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + mxc_iomux_set_pad(MX53_PIN_SD1_DATA3, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + break; + case 1: + mxc_request_iomux(MX53_PIN_ATA_RESET_B, + IOMUX_CONFIG_ALT2); + mxc_request_iomux(MX53_PIN_ATA_IORDY, + IOMUX_CONFIG_ALT2); + mxc_request_iomux(MX53_PIN_ATA_DATA8, + IOMUX_CONFIG_ALT4); + mxc_request_iomux(MX53_PIN_ATA_DATA9, + IOMUX_CONFIG_ALT4); + mxc_request_iomux(MX53_PIN_ATA_DATA10, + IOMUX_CONFIG_ALT4); + mxc_request_iomux(MX53_PIN_ATA_DATA11, + IOMUX_CONFIG_ALT4); + mxc_request_iomux(MX53_PIN_ATA_DATA0, + IOMUX_CONFIG_ALT4); + mxc_request_iomux(MX53_PIN_ATA_DATA1, + IOMUX_CONFIG_ALT4); + mxc_request_iomux(MX53_PIN_ATA_DATA2, + IOMUX_CONFIG_ALT4); + mxc_request_iomux(MX53_PIN_ATA_DATA3, + IOMUX_CONFIG_ALT4); + mxc_request_iomux(MX53_PIN_EIM_DA11, + IOMUX_CONFIG_ALT1); + + mxc_iomux_set_pad(MX53_PIN_ATA_RESET_B, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX53_PIN_ATA_IORDY, + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | + PAD_CTL_DRV_HIGH); + mxc_iomux_set_pad(MX53_PIN_ATA_DATA8, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + mxc_iomux_set_pad(MX53_PIN_ATA_DATA9, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + mxc_iomux_set_pad(MX53_PIN_ATA_DATA10, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + mxc_iomux_set_pad(MX53_PIN_ATA_DATA11, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + mxc_iomux_set_pad(MX53_PIN_ATA_DATA0, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + mxc_iomux_set_pad(MX53_PIN_ATA_DATA1, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + mxc_iomux_set_pad(MX53_PIN_ATA_DATA2, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + mxc_iomux_set_pad(MX53_PIN_ATA_DATA3, + PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | + PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | + PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + + break; + default: + printf("Warning: you configured more ESDHC controller" + "(%d) as supported by the board(2)\n", + CONFIG_SYS_FSL_ESDHC_NUM); + return status; + } + status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]); + } + + return status; +} +#endif + +int board_early_init_f(void) +{ + setup_iomux_uart(); + setup_iomux_fec(); + + return 0; +} + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_MX53_EVK; + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int board_late_init(void) +{ + setup_i2c(1); + power_init(); + + return 0; +} + +int checkboard(void) +{ + u32 cause; + struct src *src_regs = (struct src *)SRC_BASE_ADDR; + + puts("Board: MX53EVK ["); + + cause = src_regs->srsr; + switch (cause) { + case 0x0001: + printf("POR"); + break; + case 0x0009: + printf("RST"); + break; + case 0x0010: + case 0x0011: + printf("WDOG"); + break; + default: + printf("unknown"); + } + printf("]\n"); + return 0; +} diff --git a/board/samsung/universal_c210/Makefile b/board/samsung/universal_c210/Makefile new file mode 100644 index 0000000..0200220 --- /dev/null +++ b/board/samsung/universal_c210/Makefile @@ -0,0 +1,51 @@ +# +# Copyright (C) 2010 Samsung Electronics +# Minkyu Kang <mk7.kang@samsung.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y := universal.o onenand.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(SOBJS) $(OBJS) + $(call cmd_link_o_target, $(SOBJS) $(OBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/samsung/universal_c210/lowlevel_init.S b/board/samsung/universal_c210/lowlevel_init.S new file mode 100644 index 0000000..67635bb --- /dev/null +++ b/board/samsung/universal_c210/lowlevel_init.S @@ -0,0 +1,395 @@ +/* + * Lowlevel setup for universal board based on S5PC210 + * + * Copyright (C) 2010 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> + +/* + * Register usages: + * + * r5 has zero always + * r7 has GPIO part1 base 0x11400000 + * r6 has GPIO part2 base 0x11000000 + */ + + .globl lowlevel_init +lowlevel_init: + mov r11, lr + + /* r5 has always zero */ + mov r5, #0 + + ldr r7, =S5PC210_GPIO_PART1_BASE + ldr r6, =S5PC210_GPIO_PART2_BASE + + /* System Timer */ + ldr r0, =S5PC210_SYSTIMER_BASE + ldr r1, =0x5000 + str r1, [r0, #0x0] + ldr r1, =0xffffffff + str r1, [r0, #0x8] + ldr r1, =0x49 + str r1, [r0, #0x4] + + /* PMIC manual reset */ + /* nPOWER: XEINT_23: GPX2[7] */ + add r0, r6, #0xC40 @ S5PC210_GPIO_X2_OFFSET + ldr r1, [r0, #0x0] + bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit + orr r1, r1, #(0x1 << 28) @ Output + str r1, [r0, #0x0] + + ldr r1, [r0, #0x4] + orr r1, r1, #(1 << 7) @ 7 = 7 * 1-bit + str r1, [r0, #0x4] + + /* init system clock */ + bl system_clock_init + + /* Disable Watchdog */ + ldr r0, =S5PC210_WATCHDOG_BASE @0x10060000 + str r5, [r0] + + /* UART */ + bl uart_asm_init + + /* PMU init */ + bl system_power_init + + bl tzpc_init + + mov lr, r11 + mov pc, lr + nop + nop + nop + +/* + * uart_asm_init: Initialize UART's pins + */ +uart_asm_init: + /* + * setup UART0-UART4 GPIOs (part1) + * GPA1CON[3] = I2C_3_SCL (3) + * GPA1CON[2] = I2C_3_SDA (3) + */ + mov r0, r7 + ldr r1, =0x22222222 + str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET + ldr r1, =0x00223322 + str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET + + /* UART_SEL GPY4[7] (part2) at S5PC210 */ + add r0, r6, #0x1A0 @ S5PC210_GPIO_Y4_OFFSET + ldr r1, [r0, #0x0] + bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit + orr r1, r1, #(0x1 << 28) + str r1, [r0, #0x0] + + ldr r1, [r0, #0x8] + bic r1, r1, #(0x3 << 14) @ 14 = 7 * 2-bit + orr r1, r1, #(0x3 << 14) @ Pull-up enabled + str r1, [r0, #0x8] + + ldr r1, [r0, #0x4] + orr r1, r1, #(1 << 7) @ 7 = 7 * 1-bit + str r1, [r0, #0x4] + + mov pc, lr + nop + nop + nop + +system_clock_init: + ldr r0, =S5PC210_CLOCK_BASE + + /* APLL(1), MPLL(1), CORE(0), HPM(0) */ + ldr r1, =0x0101 + ldr r2, =0x14200 @ CLK_SRC_CPU + str r1, [r0, r2] + + /* wait ?us */ + mov r1, #0x10000 +1: subs r1, r1, #1 + bne 1b + + /* + * CLK_SRC_TOP0 + * MUX_ONENAND_SEL[28] 0: DOUT133, 1: DOUT166 + * MUX_VPLL_SEL[8] 0: FINPLL, 1: FOUTVPLL + * MUX_EPLL_SEL[4] 0: FINPLL, 1: FOUTEPLL + */ + ldr r1, =0x10000110 + ldr r2, =0x0C210 @ CLK_SRC_TOP + str r1, [r0, r2] + + /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */ + ldr r1, =0x0066666 + ldr r2, =0x0C240 @ CLK_SRC_FSYS + str r1, [r0, r2] + /* UART[0:5], PWM: SCLKMPLL(6) */ + ldr r1, =0x6666666 + ldr r2, =0x0C250 @ CLK_SRC_PERIL0_OFFSET + str r1, [r0, r2] + + /* CPU0: CORE, COREM0, COREM1, PERI, ATB, PCLK_DBG, APLL */ + ldr r1, =0x0133730 + ldr r2, =0x14500 @ CLK_DIV_CPU0 + str r1, [r0, r2] + /* CPU1: COPY, HPM */ + ldr r1, =0x03 + ldr r2, =0x14504 @ CLK_DIV_CPU1 + str r1, [r0, r2] + /* DMC0: ACP, ACP_PCLK, DPHY, DMC, DMCD, DMCP, COPY2 CORE_TIMER */ + ldr r1, =0x13111113 + ldr r2, =0x10500 @ CLK_DIV_DMC0 + str r1, [r0, r2] + /* DMC1: PWI, DVSEM, DPM */ + ldr r1, =0x01010100 + ldr r2, =0x10504 @ CLK_DIV_DMC1 + str r1, [r0, r2] + /* LEFTBUS: GDL, GPL */ + ldr r1, =0x13 + ldr r2, =0x04500 @ CLK_DIV_LEFTBUS + str r1, [r0, r2] + /* RIGHHTBUS: GDR, GPR */ + ldr r1, =0x13 + ldr r2, =0x08500 @ CLK_DIV_RIGHTBUS + str r1, [r0, r2] + /* + * CLK_DIV_TOP + * ONENAND_RATIOD[18:16]: 0 SCLK_ONENAND = MOUTONENAND / (n + 1) + * ACLK_200, ACLK_100, ACLK_160, ACLK_133, + */ + ldr r1, =0x00005473 + ldr r2, =0x0C510 @ CLK_DIV_TOP + str r1, [r0, r2] + /* MMC[0:1] */ + ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */ + ldr r2, =0x0C544 @ CLK_DIV_FSYS1 + str r1, [r0, r2] + /* MMC[2:3] */ + ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */ + ldr r2, =0x0C548 @ CLK_DIV_FSYS2 + str r1, [r0, r2] + /* MMC4 */ + ldr r1, =0x000f /* 800(MPLL) / (15 + 1) */ + ldr r2, =0x0C54C @ CLK_DIV_FSYS3 + str r1, [r0, r2] + /* UART[0:5] */ + ldr r1, =0x774777 + ldr r2, =0x0C550 @ CLK_DIV_PERIL0 + str r1, [r0, r2] + /* SLIMBUS: ???, PWM */ + ldr r1, =0x8 + ldr r2, =0x0C55C @ CLK_DIV_PERIL3 + str r1, [r0, r2] + + /* PLL Setting */ + ldr r1, =0x1C20 + ldr r2, =0x14000 @ APLL_LOCK + str r1, [r0, r2] + ldr r2, =0x14008 @ MPLL_LOCK + str r1, [r0, r2] + ldr r2, =0x0C010 @ EPLL_LOCK + str r1, [r0, r2] + ldr r2, =0x0C020 @ VPLL_LOCK + str r1, [r0, r2] + + /* APLL */ + ldr r1, =0x8000001c + ldr r2, =0x14104 @ APLL_CON1 + str r1, [r0, r2] + ldr r1, =0x80c80601 @ 800MHz + ldr r2, =0x14100 @ APLL_CON0 + str r1, [r0, r2] + /* MPLL */ + ldr r1, =0x8000001C + ldr r2, =0x1410C @ MPLL_CON1 + str r1, [r0, r2] + ldr r1, =0x80c80601 @ 800MHz + ldr r2, =0x14108 @ MPLL_CON0 + str r1, [r0, r2] + /* EPLL */ + ldr r1, =0x0 + ldr r2, =0x0C114 @ EPLL_CON1 + str r1, [r0, r2] + ldr r1, =0x80300302 @ 96MHz + ldr r2, =0x0C110 @ EPLL_CON0 + str r1, [r0, r2] + /* VPLL */ + ldr r1, =0x11000400 + ldr r2, =0x0C124 @ VPLL_CON1 + str r1, [r0, r2] + ldr r1, =0x80350302 @ 108MHz + ldr r2, =0x0C120 @ VPLL_CON0 + str r1, [r0, r2] + + /* + * SMMUJPEG[11], JPEG[6], CSIS1[5] : 0111 1001 + * Turn off all + */ + ldr r1, =0xFFF80000 + ldr r2, =0x0C920 @ CLK_GATE_IP_CAM + str r1, [r0, r2] + + /* Turn off all */ + ldr r1, =0xFFFFFFC0 + ldr r2, =0x0C924 @ CLK_GATE_IP_VP + str r1, [r0, r2] + + /* Turn off all */ + ldr r1, =0xFFFFFFE0 + ldr r2, =0x0C928 @ CLK_GATE_IP_MFC + str r1, [r0, r2] + + /* Turn off all */ + ldr r1, =0xFFFFFFFC + ldr r2, =0x0C92C @ CLK_GATE_IP_G3D + str r1, [r0, r2] + + /* Turn off all */ + ldr r1, =0xFFFFFC00 + ldr r2, =0x0C930 @ CLK_GATE_IP_IMAGE + str r1, [r0, r2] + + /* DSIM0[3], MDNIE0[2], MIE0[1] : 0001 */ + ldr r1, =0xFFFFFFF1 + ldr r2, =0x0C934 @ CLK_GATE_IP_LCD0 + str r1, [r0, r2] + + /* Turn off all */ + ldr r1, =0xFFFFFFC0 + ldr r2, =0x0C938 @ CLK_GATE_IP_LCD1 + str r1, [r0, r2] + + /* + * SMMUPCIE[18], NFCON[16] : 1111 1010 + * PCIE[14], SATA[10], SDMMC43[9:8] : 1011 1000 + * SDMMC1[6], TSI[4], SATAPHY[3], PCIEPHY[2] : 1010 0011 + */ + ldr r1, =0xFFFAB8A3 + ldr r2, =0x0C940 @ CLK_GATE_IP_FSYS + str r1, [r0, r2] + + /* Turn off all */ + ldr r1, =0xFFFFFFFC + ldr r2, =0x0C94C @ CLK_GATE_IP_GPS + str r1, [r0, r2] + + /* + * AC97[27], SPDIF[26], SLIMBUS[25] : 1111 0001 + * I2C2[8] : 1111 1110 + */ + ldr r1, =0xF1FFFEFF + ldr r2, =0x0C950 @ CLK_GATE_IP_PERIL + str r1, [r0, r2] + + /* + * KEYIF[16] : 1111 1110 + */ + ldr r1, =0xFFFEFFFF + ldr r2, =0x0C960 @ CLK_GATE_IP_PERIR + str r1, [r0, r2] + + /* LCD1[5], G3D[3], MFC[2], TV[1] : 1101 0001 */ + ldr r1, =0xFFFFFFD1 + ldr r2, =0x0C970 @ CLK_GATE_BLOCK + str r1, [r0, r2] + mov pc, lr + nop + nop + nop + +system_power_init: + ldr r0, =S5PC210_POWER_BASE @ 0x10020000 + + ldr r2, =0x330C @ PS_HOLD_CONTROL + ldr r1, [r0, r2] + orr r1, r1, #(0x3 << 8) @ Data High, Output En + str r1, [r0, r2] + + /* Power Down */ + add r2, r0, #0x3000 + str r5, [r2, #0xC20] @ TV_CONFIGURATION + str r5, [r2, #0xC40] @ MFC_CONFIGURATION + str r5, [r2, #0xC60] @ G3D_CONFIGURATION + str r5, [r2, #0xCA0] @ LCD1_CONFIGURATION + str r5, [r2, #0xCE0] @ GPS_CONFIGURATION + + mov pc, lr + nop + nop + nop + +tzpc_init: + ldr r0, =0x10110000 + mov r1, #0x0 + str r1, [r0] + mov r1, #0xff + str r1, [r0, #0x0804] + str r1, [r0, #0x0810] + str r1, [r0, #0x081C] + str r1, [r0, #0x0828] + + ldr r0, =0x10120000 + mov r1, #0x0 + str r1, [r0] + mov r1, #0xff + str r1, [r0, #0x0804] + str r1, [r0, #0x0810] + str r1, [r0, #0x081C] + str r1, [r0, #0x0828] + + ldr r0, =0x10130000 + mov r1, #0x0 + str r1, [r0] + mov r1, #0xff + str r1, [r0, #0x0804] + str r1, [r0, #0x0810] + str r1, [r0, #0x081C] + str r1, [r0, #0x0828] + + ldr r0, =0x10140000 + mov r1, #0x0 + str r1, [r0] + mov r1, #0xff + str r1, [r0, #0x0804] + str r1, [r0, #0x0810] + str r1, [r0, #0x081C] + str r1, [r0, #0x0828] + + ldr r0, =0x10150000 + mov r1, #0x0 + str r1, [r0] + mov r1, #0xff + str r1, [r0, #0x0804] + str r1, [r0, #0x0810] + str r1, [r0, #0x081C] + str r1, [r0, #0x0828] + + mov pc, lr diff --git a/board/samsung/universal_c210/onenand.c b/board/samsung/universal_c210/onenand.c new file mode 100644 index 0000000..20e1dc5 --- /dev/null +++ b/board/samsung/universal_c210/onenand.c @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> + +void onenand_board_init(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + + this->base = (void *)CONFIG_SYS_ONENAND_BASE; + this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK; +} diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c new file mode 100644 index 0000000..b65bc6e --- /dev/null +++ b/board/samsung/universal_c210/universal.c @@ -0,0 +1,250 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * Kyungmin Park <kyungmin.park@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/adc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct s5pc210_gpio_part1 *gpio1; +struct s5pc210_gpio_part2 *gpio2; +unsigned int board_rev; + +u32 get_board_rev(void) +{ + return board_rev; +} + +static int get_hwrev(void) +{ + return board_rev & 0xFF; +} + +static void check_hw_revision(void); + +int board_init(void) +{ + gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE; + gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE; + + gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + check_hw_revision(); + printf("HW Revision:\t0x%x\n", board_rev); + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) + + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; +} + +static unsigned short get_adc_value(int channel) +{ + struct s5p_adc *adc = (struct s5p_adc *)samsung_get_base_adc(); + unsigned short ret = 0; + unsigned int reg; + unsigned int loop = 0; + + writel(channel & 0xF, &adc->adcmux); + writel((1 << 14) | (49 << 6), &adc->adccon); + writel(1000 & 0xffff, &adc->adcdly); + writel(readl(&adc->adccon) | (1 << 16), &adc->adccon); /* 12 bit */ + udelay(10); + writel(readl(&adc->adccon) | (1 << 0), &adc->adccon); /* Enable */ + udelay(10); + + do { + udelay(1); + reg = readl(&adc->adccon); + } while (!(reg & (1 << 15)) && (loop++ < 1000)); + + ret = readl(&adc->adcdat0) & 0xFFF; + + return ret; +} + +static unsigned int get_hw_revision(void) +{ + int hwrev, mode0, mode1; + + mode0 = get_adc_value(1); /* HWREV_MODE0 */ + mode1 = get_adc_value(2); /* HWREV_MODE1 */ + + /* + * XXX Always set the default hwrev as the latest board + * ADC = (voltage) / 3.3 * 4096 + */ + hwrev = 3; + +#define IS_RANGE(x, min, max) ((x) > (min) && (x) < (max)) + if (IS_RANGE(mode0, 80, 200) && IS_RANGE(mode1, 80, 200)) + hwrev = 0x0; /* 0.01V 0.01V */ + if (IS_RANGE(mode0, 750, 1000) && IS_RANGE(mode1, 80, 200)) + hwrev = 0x1; /* 610mV 0.01V */ + if (IS_RANGE(mode0, 1300, 1700) && IS_RANGE(mode1, 80, 200)) + hwrev = 0x2; /* 1.16V 0.01V */ + if (IS_RANGE(mode0, 2000, 2400) && IS_RANGE(mode1, 80, 200)) + hwrev = 0x3; /* 1.79V 0.01V */ +#undef IS_RANGE + + debug("mode0: %d, mode1: %d, hwrev 0x%x\n", mode0, mode1, hwrev); + + return hwrev; +} + +static void check_hw_revision(void) +{ + int hwrev; + + hwrev = get_hw_revision(); + + board_rev |= hwrev; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + puts("Board:\tUniversal C210\n"); + return 0; +} +#endif + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + int i, err; + + switch (get_hwrev()) { + case 0: + /* + * Set the low to enable LDO_EN + * But when you use the test board for eMMC booting + * you should set it HIGH since it removes the inverter + */ + /* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */ + gpio_direction_output(&gpio1->e3, 6, 0); + break; + default: + /* + * Default reset state is High and there's no inverter + * But set it as HIGH to ensure + */ + /* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */ + gpio_direction_output(&gpio1->e1, 3, 1); + break; + } + + /* + * eMMC GPIO: + * SDR 8-bit@48MHz at MMC0 + * GPK0[0] SD_0_CLK(2) + * GPK0[1] SD_0_CMD(2) + * GPK0[2] SD_0_CDn -> Not used + * GPK0[3:6] SD_0_DATA[0:3](2) + * GPK1[3:6] SD_0_DATA[0:3](3) + * + * DDR 4-bit@26MHz at MMC4 + * GPK0[0] SD_4_CLK(3) + * GPK0[1] SD_4_CMD(3) + * GPK0[2] SD_4_CDn -> Not used + * GPK0[3:6] SD_4_DATA[0:3](3) + * GPK1[3:6] SD_4_DATA[4:7](4) + */ + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + /* GPK0[0:6] special function 2 */ + gpio_cfg_pin(&gpio2->k0, i, 0x2); + /* GPK0[0:6] pull disable */ + gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE); + /* GPK0[0:6] drv 4x */ + gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X); + } + + for (i = 3; i < 7; i++) { + /* GPK1[3:6] special function 3 */ + gpio_cfg_pin(&gpio2->k1, i, 0x3); + /* GPK1[3:6] pull disable */ + gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE); + /* GPK1[3:6] drv 4x */ + gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X); + } + + /* T-flash detect */ + gpio_cfg_pin(&gpio2->x3, 4, 0xf); + gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP); + + /* + * MMC device init + * mmc0 : eMMC (8-bit buswidth) + * mmc2 : SD card (4-bit buswidth) + */ + err = s5p_mmc_init(0, 8); + + /* + * Check the T-flash detect pin + * GPX3[4] T-flash detect pin + */ + if (!gpio_get_value(&gpio2->x3, 4)) { + /* + * SD card GPIO: + * GPK2[0] SD_2_CLK(2) + * GPK2[1] SD_2_CMD(2) + * GPK2[2] SD_2_CDn -> Not used + * GPK2[3:6] SD_2_DATA[0:3](2) + */ + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + /* GPK2[0:6] special function 2 */ + gpio_cfg_pin(&gpio2->k2, i, 0x2); + /* GPK2[0:6] pull disable */ + gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE); + /* GPK2[0:6] drv 4x */ + gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X); + } + err = s5p_mmc_init(2, 4); + } + + return err; + +} +#endif @@ -38,6 +38,7 @@ qong arm arm1136 - davedenx mx31 mx31ads arm arm1136 - freescale mx31 imx31_litekit arm arm1136 - logicpd mx31 +mx35pdk arm arm1136 - freescale mx35 omap2420h4 arm arm1136 - ti omap24xx tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x armadillo arm arm720t @@ -105,8 +106,11 @@ magnesium arm arm926ejs imx27lite logicpd omap5912osk arm arm926ejs - ti omap edminiv2 arm arm926ejs - LaCie orion5x ca9x4_ct_vxp arm armv7 vexpress armltd +efikamx arm armv7 efikamx - mx5 mx51evk arm armv7 mx51evk freescale mx5 +mx53evk arm armv7 mx53evk freescale mx5 vision2 arm armv7 vision2 ttcontrol mx5 +cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 igep0020 arm armv7 igep0020 isee omap3 @@ -122,6 +126,7 @@ omap4_panda arm armv7 panda ti omap4_sdp4430 arm armv7 sdp4430 ti omap4 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx +s5pc210_universal arm armv7 universal_c210 samsung s5pc2xx actux1 arm ixp actux2 arm ixp actux3 arm ixp diff --git a/doc/README.imximage b/doc/README.imximage index 3378f7e..c74239d 100644 --- a/doc/README.imximage +++ b/doc/README.imximage @@ -57,6 +57,13 @@ Configuration command line syntax: 2. Following are the valid command strings and associated data strings:- Command string data string -------------- ----------- + IMXIMAGE_VERSION 1/2 + 1 is for mx25/mx35/mx51 compatible, + 2 is for mx53 compatible, + others is invalid and error is generated. + This command need appear the fist before + other valid commands in configuration file. + BOOT_FROM nand/spi/sd/onenand Example: BOOT_FROM spi @@ -69,8 +76,9 @@ Configuration command line syntax: Example (write to IOMUXC): DATA 4 0x73FA88a0 0x200 -The processor support up to 60 register programming commands. An error -is generated if more commands are found in the configuration file. +The processor support up to 60 register programming commands for IMXIMAGE_VERSION 1 +and 121 register programming commands for IMXIMAGE_VERSION 2. +An error is generated if more commands are found in the configuration file. 3. All commands are optional to program. diff --git a/doc/README.mx35pdk b/doc/README.mx35pdk new file mode 100644 index 0000000..3d69ed5 --- /dev/null +++ b/doc/README.mx35pdk @@ -0,0 +1,188 @@ +Overview +-------------- + +mx35pdk (known als as mx35_3stack) is a development board by Freescale. +It consists of three pluggable board: + - CPU module, with CPU, RAM, flash + - Personality board, with most interfaces (USB, Network,..) + - Debug board with JTAG header. + +The board is usually delivered with redboot. This howto explains how to boot +a linux kernel and how to replace the original bootloader with U-Boot. + +The board is delivered with Redboot on the NAND flash. It is possible to +switch the boot device with the switches SW1-SW2 on the Personality board, +and with SW5-SW10 on the Debug board. + +Delivered Redboot script to start the kernel +--------------------------------------------------- + +In redboot the following script is stored: + +fis load kernel +exec -c "noinitrd console=ttymxc0,115200 root=/dev/mtdblock8 rw rootfstype=jffs2 ip=dhcp fec_mac=00:04:9F:00:E7:76" + +Kernel is taken from flash. The image is in zImage format. + +Booting from NET, rootfs on NFS: +----------------------------------- + +To change the script in redboot: + +load -r -b 0x100000 <path_to_zImage> +exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nfsroot=192.168.1.1:/opt/eldk-4.2-arm/armVFP rw ip=dhcp" + +If the ip address is not set, you can set it with : + +ip_address -l <board_ip/netmask> -h <server_ip> + +Linux partitions: +--------------------------- + +As default, the board is shipped with these partition tables for NAND +and for NOR: + +Creating 5 MTD partitions on "NAND 2GiB 3,3V 8-bit": +0x00000000-0x00100000 : "nand.bootloader" +0x00100000-0x00600000 : "nand.kernel" +0x00600000-0x06600000 : "nand.rootfs" +0x06600000-0x06e00000 : "nand.configure" +0x06e00000-0x80000000 : "nand.userfs" + +Creating 6 MTD partitions on "mxc_nor_flash.0": +0x00000000-0x00080000 : "Bootloader" +0x00080000-0x00480000 : "nor.Kernel" +0x00480000-0x02280000 : "nor.userfs" +0x02280000-0x03e80000 : "nor.rootfs" +0x01fe0000-0x01fe3000 : "FIS directory" +0x01fff000-0x04000000 : "Redboot config" + +NAND partitions can be recognized enabling in kernel CONFIG_MTD_REDBOOT_PARTS. +For this board, CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK should be set to 2. + +However, the setup in redboot is not correct and does not use the whole flash. + +Better solution is to use the kernel parameter mtdparts. +Here the resulting script to be defined in RedBoot with fconfig: + +load -r -b 0x100000 sbabic/mx35pdk/zImage.2.6.37 +exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nfsroot=192.168.1.1:/opt/eldk-4.2-arm/arm rw ip=dhcp mtdparts=mxc_nand:1m(boot),5m(linux),96m(root),8m(cfg),1938m(user);physmap-flash.0:512k(b),4m(k),30m(u),28m(r)" + +Flashing U-Boot +-------------------------------- + +There are two options: the original bootloader in NAND can be replaced with +u-boot, or u-boot can be stored on the NOR flash without erasing +the delivered bootloader. +The boot storage can be select using the switches on the personality board +(SW1-SW2) and on the DEBUG board (SW4-SW10). + +The second option is to be preferred if you have not a JTAG debugger. +If something goes wrong flashing the bootloader, it is always possible to +recover the board booting from the other device. + +Replacing the bootloader on the NAND +-------------------------------------- +To replace RedBoot with U-Boot, the easy way is to do this in linux. +Start the kernel with the suggested options. Make sure to have set the +mtdparts exactly as described, because this matches the layout on the +mx35pdk. + +You should see in your boot log the following entries for the NAND +flash: + +5 cmdlinepart partitions found on MTD device mxc_nand +Creating 5 MTD partitions on "mxc_nand": +0x000000000000-0x000000100000 : "boot" +0x000000100000-0x000000600000 : "linux" +0x000000600000-0x000006600000 : "root" +0x000006600000-0x000006e00000 : "cfg" +0x000006e00000-0x000080000000 : "user" + +You can use the utilities flash_eraseall and nandwrite to put +u-boot on the NAND. The bootloader is marked as "boot", and 1MB is +reserved. If everything is correct, this partition is accessed as +/dev/mtd4. However, check if it is correct with "cat /proc/mtd" and +get the device node from the partition name: + +$ cat /proc/mtd | grep boot + +I suggest you try the utilities on a different partition to be sure +if everything works correctly. If not, and you remove RedBoot, you have to +reinstall it using the ATK tool as suggested by Freescale, or using a +JTAG debugger. + +I report the versions of the utilities I used (they are provided with ELDK): + +-bash-3.2# nandwrite --version +nandwrite $Revision: 1.32 $ + +flash_eraseall --version +flash_eraseall $Revision: 1.22 $ + +nandwrite reports a warning if the file to be saved is not sector aligned. +This should have no consequences, but I preferred to pad u-boot.bin +to get no problem at all. +$ dd if=/dev/zero of=zeros bs=1 count=74800 +$ cat u-boot.bin zeros > u-boot-padded.bin + +To erase the partition: +$ flash_eraseall /dev/mtd4 + +Writing u-boot: + +$ nandwrite /dev/mtd4 u-boot-padded.bin + +Now U-Boot is stored on the booting partition. + +To boot from NAND, you have to select the switches as follows: + +Personality board + SW2 1, 4, 5 on + 2, 3, 6, 7, 8 off + SW1 all off + +Debug Board: + SW5 0 + SW6 0 + SW7 0 + SW8 1 + SW9 1 + SW10 0 + + +Saving U-Boot in the NOR flash +--------------------------------- + +The procedure to save in the NOR flash is quite the same as to write into the NAND. + +Check the partition for boot in the NOR flash. Setting the mtdparts as reported, +the boot partition should be /dev/mtd0. + +Creating 6 MTD partitions on "mxc_nor_flash.0": +0x00000000-0x00080000 : "Bootloader" +0x00080000-0x00480000 : "nor.Kernel" +0x00480000-0x02280000 : "nor.userfs" +0x02280000-0x03e80000 : "nor.rootfs" +0x01fe0000-0x01fe3000 : "FIS directory" +0x01fff000-0x04000000 : "Redboot config" + +To erase the whole partition: +$ flash_eraseall /dev/mtd0 + +Writing u-boot: +dd if=u-boot.bin of=/dev/mtd0 + +To boot from NOR, you have to select the switches as follows: + +Personality board + SW2 all off + SW1 all off + +Debug Board: + SW5 0 + SW6 0 + SW7 0 + SW8 1 + SW9 1 + SW10 0 diff --git a/doc/README.omap3 b/doc/README.omap3 index 6227151..460950d 100644 --- a/doc/README.omap3 +++ b/doc/README.omap3 @@ -21,6 +21,8 @@ Currently the following boards are supported: * TI/Logic PD Zoom 2 [7] +* CompuLab Ltd. CM-T35 [8] + Toolchain ========= @@ -61,6 +63,11 @@ make make omap3_zoom2_config make +* CM-T35: + +make cm_t35_config +make + Custom commands =============== @@ -119,7 +126,7 @@ To read a bit : Acknowledgements ================ -OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by +OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by several TI employees. Links @@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit [7] TI/Logic PD Zoom 2 http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf -[8] TI OMAP3 U-Boot: + +[8] CompuLab Ltd. CM-T35: + +http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm + +[9] TI OMAP3 U-Boot: http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz diff --git a/drivers/block/Makefile b/drivers/block/Makefile index e27175b..aa7dc87 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -31,6 +31,7 @@ COBJS-$(CONFIG_FSL_SATA) += fsl_sata.o COBJS-$(CONFIG_LIBATA) += libata.o COBJS-$(CONFIG_CMD_MG_DISK) += mg_disk.o COBJS-$(CONFIG_MVSATA_IDE) += mvsata_ide.o +COBJS-$(CONFIG_MX51_PATA) += mxc_ata.o COBJS-$(CONFIG_PATA_BFIN) += pata_bfin.o COBJS-$(CONFIG_SATA_DWC) += sata_dwc.o COBJS-$(CONFIG_SATA_SIL3114) += sata_sil3114.o diff --git a/drivers/block/mxc_ata.c b/drivers/block/mxc_ata.c new file mode 100644 index 0000000..f22f4f4 --- /dev/null +++ b/drivers/block/mxc_ata.c @@ -0,0 +1,146 @@ +/* + * Freescale iMX51 ATA driver + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * Based on code by: + * Mahesh Mahadevan <mahesh.mahadevan@freescale.com> + * + * Based on code from original FSL ATA driver, which is + * part of eCos, the Embedded Configurable Operating System. + * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <config.h> +#include <asm/byteorder.h> +#include <asm/io.h> +#include <ide.h> + +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> + +/* MXC ATA register offsets */ +struct mxc_ata_config_regs { + u8 time_off; /* 0x00 */ + u8 time_on; + u8 time_1; + u8 time_2w; + u8 time_2r; + u8 time_ax; + u8 time_pio_rdx; + u8 time_4; + u8 time_9; + u8 time_m; + u8 time_jn; + u8 time_d; + u8 time_k; + u8 time_ack; + u8 time_env; + u8 time_udma_rdx; + u8 time_zah; /* 0x10 */ + u8 time_mlix; + u8 time_dvh; + u8 time_dzfs; + u8 time_dvs; + u8 time_cvh; + u8 time_ss; + u8 time_cyc; + u32 fifo_data_32; /* 0x18 */ + u32 fifo_data_16; + u32 fifo_fill; + u32 ata_control; + u32 interrupt_pending; + u32 interrupt_enable; + u32 interrupt_clear; + u32 fifo_alarm; +}; + +struct mxc_data_hdd_regs { + u32 drive_data; /* 0xa0 */ + u32 drive_features; + u32 drive_sector_count; + u32 drive_sector_num; + u32 drive_cyl_low; + u32 drive_cyl_high; + u32 drive_dev_head; + u32 command; + u32 status; + u32 alt_status; +}; + +/* PIO timing table */ +#define NR_PIO_SPECS 5 +static uint16_t pio_t1[NR_PIO_SPECS] = { 70, 50, 30, 30, 25 }; +static uint16_t pio_t2_8[NR_PIO_SPECS] = { 290, 290, 290, 80, 70 }; +static uint16_t pio_t4[NR_PIO_SPECS] = { 30, 20, 15, 10, 10 }; +static uint16_t pio_t9[NR_PIO_SPECS] = { 20, 15, 10, 10, 10 }; +static uint16_t pio_tA[NR_PIO_SPECS] = { 50, 50, 50, 50, 50 }; + +#define REG2OFF(reg) ((((uint32_t)reg) & 0x3) * 8) +static void set_ata_bus_timing(unsigned char mode) +{ + uint32_t val; + uint32_t T = 1000000000 / mxc_get_clock(MXC_IPG_CLK); + + struct mxc_ata_config_regs *ata_regs; + ata_regs = (struct mxc_ata_config_regs *)CONFIG_SYS_ATA_BASE_ADDR; + + if (mode >= NR_PIO_SPECS) + return; + + /* Write TIME_OFF/ON/1/2W */ + val = (3 << REG2OFF(&ata_regs->time_off)) | + (3 << REG2OFF(&ata_regs->time_on)) | + (((pio_t1[mode] + T) / T) << REG2OFF(&ata_regs->time_1)) | + (((pio_t2_8[mode] + T) / T) << REG2OFF(&ata_regs->time_2w)); + writel(val, &ata_regs->time_off); + + /* Write TIME_2R/AX/RDX/4 */ + val = (((pio_t2_8[mode] + T) / T) << REG2OFF(&ata_regs->time_2r)) | + (((pio_tA[mode] + T) / T + 2) << REG2OFF(&ata_regs->time_ax)) | + (1 << REG2OFF(&ata_regs->time_pio_rdx)) | + (((pio_t4[mode] + T) / T) << REG2OFF(&ata_regs->time_4)); + writel(val, &ata_regs->time_2r); + + /* Write TIME_9 ; the rest of timing registers is irrelevant for PIO */ + val = (((pio_t9[mode] + T) / T) << REG2OFF(&ata_regs->time_9)); + writel(val, &ata_regs->time_9); +} + +int ide_preinit(void) +{ + struct mxc_ata_config_regs *ata_regs; + ata_regs = (struct mxc_ata_config_regs *)CONFIG_SYS_ATA_BASE_ADDR; + + /* 46.3.3.4 @ FSL iMX51 manual */ + /* FIFO normal op., drive reset */ + writel(0x80, &ata_regs->ata_control); + /* FIFO normal op., drive not reset */ + writel(0xc0, &ata_regs->ata_control); + + /* Configure the PIO timing */ + set_ata_bus_timing(CONFIG_MXC_ATA_PIO_MODE); + + /* 46.3.3.4 @ FSL iMX51 manual */ + /* Drive not reset, IORDY handshake */ + writel(0x41, &ata_regs->ata_control); + + return 0; +} diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index 663141f..53a0673 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -24,7 +24,7 @@ #ifdef CONFIG_MX31 #include <asm/arch/mx31-regs.h> #endif -#ifdef CONFIG_MX51 +#if defined(CONFIG_MX51) || defined(CONFIG_MX53) #include <asm/arch/imx-regs.h> #endif #include <asm/io.h> @@ -35,9 +35,14 @@ static unsigned long gpio_ports[] = { [0] = GPIO1_BASE_ADDR, [1] = GPIO2_BASE_ADDR, [2] = GPIO3_BASE_ADDR, -#ifdef CONFIG_MX51 +#if defined(CONFIG_MX51) || defined(CONFIG_MX53) [3] = GPIO4_BASE_ADDR, #endif +#if defined(CONFIG_MX53) + [4] = GPIO5_BASE_ADDR, + [5] = GPIO6_BASE_ADDR, + [6] = GPIO7_BASE_ADDR, +#endif }; int mxc_gpio_direction(unsigned int gpio, enum mxc_gpio_direction direction) diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index 8e10fbb..c5ec486 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -23,11 +23,17 @@ */ #include <common.h> +#include <asm/io.h> #if defined(CONFIG_HARD_I2C) +#if defined(CONFIG_MX31) #include <asm/arch/mx31.h> #include <asm/arch/mx31-regs.h> +#else +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> +#endif #define IADR 0x00 #define IFDR 0x04 @@ -47,7 +53,7 @@ #define I2SR_IIF (1 << 1) #define I2SR_RX_NO_AK (1 << 0) -#ifdef CONFIG_SYS_I2C_MX31_PORT1 +#if defined(CONFIG_SYS_I2C_MX31_PORT1) #define I2C_BASE 0x43f80000 #define I2C_CLK_OFFSET 26 #elif defined (CONFIG_SYS_I2C_MX31_PORT2) @@ -56,130 +62,205 @@ #elif defined (CONFIG_SYS_I2C_MX31_PORT3) #define I2C_BASE 0x43f84000 #define I2C_CLK_OFFSET 30 +#elif defined(CONFIG_SYS_I2C_MX53_PORT1) +#define I2C_BASE I2C1_BASE_ADDR +#elif defined(CONFIG_SYS_I2C_MX53_PORT2) +#define I2C_BASE I2C2_BASE_ADDR +#elif defined(CONFIG_SYS_I2C_MX35_PORT1) +#define I2C_BASE I2C_BASE_ADDR #else -#error "define CONFIG_SYS_I2C_MX31_PORTx to use the mx31 I2C driver" +#error "define CONFIG_SYS_I2C_MX<Processor>_PORTx to use the mx I2C driver" #endif -#ifdef DEBUG -#define DPRINTF(args...) printf(args) -#else -#define DPRINTF(args...) -#endif +#define I2C_MAX_TIMEOUT 10000 +#define I2C_MAX_RETRIES 3 static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144, 160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960, 1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840}; +static inline void i2c_reset(void) +{ + writew(0, I2C_BASE + I2CR); /* Reset module */ + writew(0, I2C_BASE + I2SR); + writew(I2CR_IEN, I2C_BASE + I2CR); +} + void i2c_init(int speed, int unused) { - int freq = mx31_get_ipg_clk(); + int freq; int i; +#if defined(CONFIG_MX31) + struct clock_control_regs *sc_regs = + (struct clock_control_regs *)CCM_BASE; + + freq = mx31_get_ipg_clk(); /* start the required I2C clock */ - __REG(CCM_CGR0) = __REG(CCM_CGR0) | (3 << I2C_CLK_OFFSET); + writel(readl(&sc_regs->cgr0) | (3 << I2C_CLK_OFFSET), + &sc_regs->cgr0); +#else + freq = mxc_get_clock(MXC_IPG_PERCLK); +#endif for (i = 0; i < 0x1f; i++) if (freq / div[i] <= speed) break; - DPRINTF("%s: speed: %d\n",__FUNCTION__, speed); + debug("%s: speed: %d\n", __func__, speed); - __REG16(I2C_BASE + I2CR) = 0; /* Reset module */ - __REG16(I2C_BASE + IFDR) = i; - __REG16(I2C_BASE + I2CR) = I2CR_IEN; - __REG16(I2C_BASE + I2SR) = 0; + writew(i, I2C_BASE + IFDR); + i2c_reset(); +} + +static int wait_idle(void) +{ + int timeout = I2C_MAX_TIMEOUT; + + while ((readw(I2C_BASE + I2SR) & I2SR_IBB) && --timeout) { + writew(0, I2C_BASE + I2SR); + udelay(1); + } + return timeout ? timeout : (!(readw(I2C_BASE + I2SR) & I2SR_IBB)); } static int wait_busy(void) { - int timeout = 10000; + int timeout = I2C_MAX_TIMEOUT; - while (!(__REG16(I2C_BASE + I2SR) & I2SR_IIF) && --timeout) + while (!(readw(I2C_BASE + I2SR) & I2SR_IBB) && --timeout) udelay(1); - __REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */ + writew(0, I2C_BASE + I2SR); /* clear interrupt */ return timeout; } +static int wait_complete(void) +{ + int timeout = I2C_MAX_TIMEOUT; + + while ((!(readw(I2C_BASE + I2SR) & I2SR_ICF)) && (--timeout)) { + writew(0, I2C_BASE + I2SR); + udelay(1); + } + udelay(200); + + writew(0, I2C_BASE + I2SR); /* clear interrupt */ + + return timeout; +} + + static int tx_byte(u8 byte) { - __REG16(I2C_BASE + I2DR) = byte; + writew(byte, I2C_BASE + I2DR); - if (!wait_busy() || __REG16(I2C_BASE + I2SR) & I2SR_RX_NO_AK) + if (!wait_complete() || readw(I2C_BASE + I2SR) & I2SR_RX_NO_AK) return -1; return 0; } -static int rx_byte(void) +static int rx_byte(int last) { - if (!wait_busy()) + if (!wait_complete()) return -1; - return __REG16(I2C_BASE + I2DR); + if (last) + writew(I2CR_IEN, I2C_BASE + I2CR); + + return readw(I2C_BASE + I2DR); } int i2c_probe(uchar chip) { int ret; - __REG16(I2C_BASE + I2CR) = 0; /* Reset module */ - __REG16(I2C_BASE + I2CR) = I2CR_IEN; + writew(0, I2C_BASE + I2CR); /* Reset module */ + writew(I2CR_IEN, I2C_BASE + I2CR); - __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX; + writew(I2CR_IEN | I2CR_MSTA | I2CR_MTX, I2C_BASE + I2CR); ret = tx_byte(chip << 1); - __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MTX; + writew(I2CR_IEN | I2CR_MTX, I2C_BASE + I2CR); return ret; } static int i2c_addr(uchar chip, uint addr, int alen) { - __REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */ - __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX; + int i, retry = 0; + for (retry = 0; retry < 3; retry++) { + if (wait_idle()) + break; + i2c_reset(); + for (i = 0; i < I2C_MAX_TIMEOUT; i++) + udelay(1); + } + if (retry >= I2C_MAX_RETRIES) { + debug("%s:bus is busy(%x)\n", + __func__, readw(I2C_BASE + I2SR)); + return -1; + } + writew(I2CR_IEN | I2CR_MSTA | I2CR_MTX, I2C_BASE + I2CR); - if (tx_byte(chip << 1)) + if (!wait_busy()) { + debug("%s:trigger start fail(%x)\n", + __func__, readw(I2C_BASE + I2SR)); return -1; + } + if (tx_byte(chip << 1) || (readw(I2C_BASE + I2SR) & I2SR_RX_NO_AK)) { + debug("%s:chip address cycle fail(%x)\n", + __func__, readw(I2C_BASE + I2SR)); + return -1; + } while (alen--) - if (tx_byte((addr >> (alen * 8)) & 0xff)) + if (tx_byte((addr >> (alen * 8)) & 0xff) || + (readw(I2C_BASE + I2SR) & I2SR_RX_NO_AK)) { + debug("%s:device address cycle fail(%x)\n", + __func__, readw(I2C_BASE + I2SR)); return -1; + } return 0; } int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) { - int timeout = 10000; + int timeout = I2C_MAX_TIMEOUT; int ret; - DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",__FUNCTION__, chip, addr, alen, len); + debug("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n", + __func__, chip, addr, alen, len); if (i2c_addr(chip, addr, alen)) { printf("i2c_addr failed\n"); return -1; } - __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX | I2CR_RSTA; + writew(I2CR_IEN | I2CR_MSTA | I2CR_MTX | I2CR_RSTA, I2C_BASE + I2CR); if (tx_byte(chip << 1 | 1)) return -1; - __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | ((len == 1) ? I2CR_TX_NO_AK : 0); + writew(I2CR_IEN | I2CR_MSTA | + ((len == 1) ? I2CR_TX_NO_AK : 0), + I2C_BASE + I2CR); - ret = __REG16(I2C_BASE + I2DR); + ret = readw(I2C_BASE + I2DR); while (len--) { - if ((ret = rx_byte()) < 0) + ret = rx_byte(len == 0); + if (ret < 0) return -1; *buf++ = ret; if (len <= 1) - __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_TX_NO_AK; + writew(I2CR_IEN | I2CR_MSTA | + I2CR_TX_NO_AK, + I2C_BASE + I2CR); } - wait_busy(); - - __REG16(I2C_BASE + I2CR) = I2CR_IEN; + writew(I2CR_IEN, I2C_BASE + I2CR); - while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout) + while (readw(I2C_BASE + I2SR) & I2SR_IBB && --timeout) udelay(1); return 0; @@ -187,8 +268,9 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) { - int timeout = 10000; - DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",__FUNCTION__, chip, addr, alen, len); + int timeout = I2C_MAX_TIMEOUT; + debug("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n", + __func__, chip, addr, alen, len); if (i2c_addr(chip, addr, alen)) return -1; @@ -197,9 +279,9 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) if (tx_byte(*buf++)) return -1; - __REG16(I2C_BASE + I2CR) = I2CR_IEN; + writew(I2CR_IEN, I2C_BASE + I2CR); - while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout) + while (readw(I2C_BASE + I2SR) & I2SR_IBB && --timeout) udelay(1); return 0; diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index a76bd4e..b152486 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -28,12 +28,13 @@ LIB := $(obj)libmisc.o COBJS-$(CONFIG_ALI152X) += ali512x.o COBJS-$(CONFIG_DS4510) += ds4510.o COBJS-$(CONFIG_FSL_LAW) += fsl_law.o +COBJS-$(CONFIG_FSL_PMIC) += fsl_pmic.o COBJS-$(CONFIG_GPIO_LED) += gpio_led.o +COBJS-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o COBJS-$(CONFIG_NS87308) += ns87308.o +COBJS-$(CONFIG_PDSP188x) += pdsp188x.o COBJS-$(CONFIG_STATUS_LED) += status_led.o COBJS-$(CONFIG_TWL4030_LED) += twl4030_led.o -COBJS-$(CONFIG_FSL_PMIC) += fsl_pmic.o -COBJS-$(CONFIG_PDSP188x) += pdsp188x.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/misc/fsl_pmic.c b/drivers/misc/fsl_pmic.c index 5ee1de1..ef80ad9 100644 --- a/drivers/misc/fsl_pmic.c +++ b/drivers/misc/fsl_pmic.c @@ -22,11 +22,48 @@ #include <config.h> #include <common.h> -#include <spi.h> #include <asm/errno.h> #include <linux/types.h> #include <fsl_pmic.h> +static int check_param(u32 reg, u32 write) +{ + if (reg > 63 || write > 1) { + printf("<reg num> = %d is invalid. Should be less then 63\n", + reg); + return -1; + } + + return 0; +} + +#ifdef CONFIG_FSL_PMIC_I2C +#include <i2c.h> + +u32 pmic_reg(u32 reg, u32 val, u32 write) +{ + unsigned char buf[4] = { 0 }; + u32 ret_val = 0; + + if (check_param(reg, write)) + return -1; + + if (write) { + buf[0] = (val >> 16) & 0xff; + buf[1] = (val >> 8) & 0xff; + buf[2] = (val) & 0xff; + if (i2c_write(CONFIG_SYS_FSL_PMIC_I2C_ADDR, reg, 1, buf, 3)) + return -1; + } else { + if (i2c_read(CONFIG_SYS_FSL_PMIC_I2C_ADDR, reg, 1, buf, 3)) + return -1; + ret_val = buf[0] << 16 | buf[1] << 8 | buf[2]; + } + + return ret_val; +} +#else /* SPI interface */ +#include <spi.h> static struct spi_slave *slave; struct spi_slave *pmic_spi_probe(void) @@ -55,11 +92,8 @@ u32 pmic_reg(u32 reg, u32 val, u32 write) return -1; } - if (reg > 63 || write > 1) { - printf("<reg num> = %d is invalid. Should be less then 63\n", - reg); + if (check_param(reg, write)) return -1; - } if (spi_claim_bus(slave)) return -1; @@ -87,6 +121,7 @@ u32 pmic_reg(u32 reg, u32 val, u32 write) spi_release_bus(slave); return cpu_to_be32(pmic_rx); } +#endif void pmic_reg_write(u32 reg, u32 value) { diff --git a/drivers/misc/mc9sdz60.c b/drivers/misc/mc9sdz60.c new file mode 100644 index 0000000..439d5a6 --- /dev/null +++ b/drivers/misc/mc9sdz60.c @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2010 Stefano Babic <sbabic@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <config.h> +#include <common.h> +#include <asm/errno.h> +#include <linux/types.h> +#include <i2c.h> +#include <mc9sdz60.h> + +#ifndef CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR +#error "You have to configure I2C address for MC9SDZ60" +#endif + + +u8 mc9sdz60_reg_read(enum mc9sdz60_reg reg) +{ + u8 val; + + if (i2c_read(CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR, reg, 1, &val, 1)) { + puts("Error reading MC9SDZ60 register\n"); + return -1; + } + + return val; +} + +void mc9sdz60_reg_write(enum mc9sdz60_reg reg, u8 val) +{ + i2c_write(CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR, reg, 1, &val, 1); +} diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 68afd30..3496f0a 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -27,6 +27,7 @@ LIB := $(obj)libmmc.o COBJS-$(CONFIG_ATMEL_MCI) += atmel_mci.o COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o +COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o COBJS-$(CONFIG_GENERIC_MMC) += mmc.o COBJS-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o diff --git a/drivers/mmc/davinci_mmc.c b/drivers/mmc/davinci_mmc.c new file mode 100644 index 0000000..4e572dc --- /dev/null +++ b/drivers/mmc/davinci_mmc.c @@ -0,0 +1,404 @@ +/* + * Davinci MMC Controller Driver + * + * Copyright (C) 2010 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <config.h> +#include <common.h> +#include <command.h> +#include <mmc.h> +#include <part.h> +#include <malloc.h> +#include <asm/io.h> +#include <asm/arch/sdmmc_defs.h> + +#define DAVINCI_MAX_BLOCKS (32) +#define WATCHDOG_COUNT (100000) + +#define get_val(addr) REG(addr) +#define set_val(addr, val) REG(addr) = (val) +#define set_bit(addr, val) set_val((addr), (get_val(addr) | (val))) +#define clear_bit(addr, val) set_val((addr), (get_val(addr) & ~(val))) + +/* Set davinci clock prescalar value based on the required clock in HZ */ +static void dmmc_set_clock(struct mmc *mmc, uint clock) +{ + struct davinci_mmc *host = mmc->priv; + struct davinci_mmc_regs *regs = host->reg_base; + uint clkrt, sysclk2, act_clock; + + if (clock < mmc->f_min) + clock = mmc->f_min; + if (clock > mmc->f_max) + clock = mmc->f_max; + + set_val(®s->mmcclk, 0); + sysclk2 = host->input_clk; + clkrt = (sysclk2 / (2 * clock)) - 1; + + /* Calculate the actual clock for the divider used */ + act_clock = (sysclk2 / (2 * (clkrt + 1))); + + /* Adjust divider if actual clock exceeds the required clock */ + if (act_clock > clock) + clkrt++; + + /* check clock divider boundary and correct it */ + if (clkrt > 0xFF) + clkrt = 0xFF; + + set_val(®s->mmcclk, (clkrt | MMCCLK_CLKEN)); +} + +/* Status bit wait loop for MMCST1 */ +static int +dmmc_wait_fifo_status(volatile struct davinci_mmc_regs *regs, uint status) +{ + uint mmcstatus1, wdog = WATCHDOG_COUNT; + mmcstatus1 = get_val(®s->mmcst1); + while (--wdog && ((get_val(®s->mmcst1) & status) != status)) + udelay(10); + + if (!(get_val(®s->mmcctl) & MMCCTL_WIDTH_4_BIT)) + udelay(100); + + if (wdog == 0) + return COMM_ERR; + + return 0; +} + +/* Busy bit wait loop for MMCST1 */ +static int dmmc_busy_wait(volatile struct davinci_mmc_regs *regs) +{ + uint mmcstatus1, wdog = WATCHDOG_COUNT; + + mmcstatus1 = get_val(®s->mmcst1); + while (--wdog && (get_val(®s->mmcst1) & MMCST1_BUSY)) + udelay(10); + + if (wdog == 0) + return COMM_ERR; + + return 0; +} + +/* Status bit wait loop for MMCST0 - Checks for error bits as well */ +static int dmmc_check_status(volatile struct davinci_mmc_regs *regs, + uint *cur_st, uint st_ready, uint st_error) +{ + uint wdog = WATCHDOG_COUNT; + uint mmcstatus = *cur_st; + + while (wdog--) { + if (mmcstatus & st_ready) { + *cur_st = mmcstatus; + mmcstatus = get_val(®s->mmcst1); + return 0; + } else if (mmcstatus & st_error) { + if (mmcstatus & MMCST0_TOUTRS) + return TIMEOUT; + printf("[ ST0 ERROR %x]\n", mmcstatus); + /* + * Ignore CRC errors as some MMC cards fail to + * initialize on DM365-EVM on the SD1 slot + */ + if (mmcstatus & MMCST0_CRCRS) + return 0; + return COMM_ERR; + } + udelay(10); + + mmcstatus = get_val(®s->mmcst0); + } + + printf("Status %x Timeout ST0:%x ST1:%x\n", st_ready, mmcstatus, + get_val(®s->mmcst1)); + return COMM_ERR; +} + +/* + * Sends a command out on the bus. Takes the mmc pointer, + * a command pointer, and an optional data pointer. + */ +static int +dmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) +{ + struct davinci_mmc *host = mmc->priv; + volatile struct davinci_mmc_regs *regs = host->reg_base; + uint mmcstatus, status_rdy, status_err; + uint i, cmddata, bytes_left = 0; + int fifo_words, fifo_bytes, err; + char *data_buf = NULL; + + /* Clear status registers */ + mmcstatus = get_val(®s->mmcst0); + fifo_words = (host->version == MMC_CTLR_VERSION_2) ? 16 : 8; + fifo_bytes = fifo_words << 2; + + /* Wait for any previous busy signal to be cleared */ + dmmc_busy_wait(regs); + + cmddata = cmd->cmdidx; + cmddata |= MMCCMD_PPLEN; + + /* Send init clock for CMD0 */ + if (cmd->cmdidx == MMC_CMD_GO_IDLE_STATE) + cmddata |= MMCCMD_INITCK; + + switch (cmd->resp_type) { + case MMC_RSP_R1b: + cmddata |= MMCCMD_BSYEXP; + /* Fall-through */ + case MMC_RSP_R1: /* R1, R1b, R5, R6, R7 */ + cmddata |= MMCCMD_RSPFMT_R1567; + break; + case MMC_RSP_R2: + cmddata |= MMCCMD_RSPFMT_R2; + break; + case MMC_RSP_R3: /* R3, R4 */ + cmddata |= MMCCMD_RSPFMT_R3; + break; + } + + set_val(®s->mmcim, 0); + + if (data) { + /* clear previous data transfer if any and set new one */ + bytes_left = (data->blocksize * data->blocks); + + /* Reset FIFO - Always use 32 byte fifo threshold */ + set_val(®s->mmcfifoctl, + (MMCFIFOCTL_FIFOLEV | MMCFIFOCTL_FIFORST)); + + if (host->version == MMC_CTLR_VERSION_2) + cmddata |= MMCCMD_DMATRIG; + + cmddata |= MMCCMD_WDATX; + if (data->flags == MMC_DATA_READ) { + set_val(®s->mmcfifoctl, MMCFIFOCTL_FIFOLEV); + } else if (data->flags == MMC_DATA_WRITE) { + set_val(®s->mmcfifoctl, + (MMCFIFOCTL_FIFOLEV | + MMCFIFOCTL_FIFODIR)); + cmddata |= MMCCMD_DTRW; + } + + set_val(®s->mmctod, 0xFFFF); + set_val(®s->mmcnblk, (data->blocks & MMCNBLK_NBLK_MASK)); + set_val(®s->mmcblen, (data->blocksize & MMCBLEN_BLEN_MASK)); + + if (data->flags == MMC_DATA_WRITE) { + uint val; + data_buf = (char *)data->src; + /* For write, fill FIFO with data before issue of CMD */ + for (i = 0; (i < fifo_words) && bytes_left; i++) { + memcpy((char *)&val, data_buf, 4); + set_val(®s->mmcdxr, val); + data_buf += 4; + bytes_left -= 4; + } + } + } else { + set_val(®s->mmcblen, 0); + set_val(®s->mmcnblk, 0); + } + + set_val(®s->mmctor, 0x1FFF); + + /* Send the command */ + set_val(®s->mmcarghl, cmd->cmdarg); + set_val(®s->mmccmd, cmddata); + + status_rdy = MMCST0_RSPDNE; + status_err = (MMCST0_TOUTRS | MMCST0_TOUTRD | + MMCST0_CRCWR | MMCST0_CRCRD); + if (cmd->resp_type & MMC_RSP_CRC) + status_err |= MMCST0_CRCRS; + + mmcstatus = get_val(®s->mmcst0); + err = dmmc_check_status(regs, &mmcstatus, status_rdy, status_err); + if (err) + return err; + + /* For R1b wait for busy done */ + if (cmd->resp_type == MMC_RSP_R1b) + dmmc_busy_wait(regs); + + /* Collect response from controller for specific commands */ + if (mmcstatus & MMCST0_RSPDNE) { + /* Copy the response to the response buffer */ + if (cmd->resp_type & MMC_RSP_136) { + cmd->response[0] = get_val(®s->mmcrsp67); + cmd->response[1] = get_val(®s->mmcrsp45); + cmd->response[2] = get_val(®s->mmcrsp23); + cmd->response[3] = get_val(®s->mmcrsp01); + } else if (cmd->resp_type & MMC_RSP_PRESENT) { + cmd->response[0] = get_val(®s->mmcrsp67); + } + } + + if (data == NULL) + return 0; + + if (data->flags == MMC_DATA_READ) { + /* check for DATDNE along with DRRDY as the controller might + * set the DATDNE without DRRDY for smaller transfers with + * less than FIFO threshold bytes + */ + status_rdy = MMCST0_DRRDY | MMCST0_DATDNE; + status_err = MMCST0_TOUTRD | MMCST0_CRCRD; + data_buf = data->dest; + } else { + status_rdy = MMCST0_DXRDY | MMCST0_DATDNE; + status_err = MMCST0_CRCWR; + } + + /* Wait until all of the blocks are transferred */ + while (bytes_left) { + err = dmmc_check_status(regs, &mmcstatus, status_rdy, + status_err); + if (err) + return err; + + if (data->flags == MMC_DATA_READ) { + /* + * MMC controller sets the Data receive ready bit + * (DRRDY) in MMCST0 even before the entire FIFO is + * full. This results in erratic behavior if we start + * reading the FIFO soon after DRRDY. Wait for the + * FIFO full bit in MMCST1 for proper FIFO clearing. + */ + if (bytes_left > fifo_bytes) + dmmc_wait_fifo_status(regs, 0x4a); + else if (bytes_left == fifo_bytes) + dmmc_wait_fifo_status(regs, 0x40); + + for (i = 0; bytes_left && (i < fifo_words); i++) { + cmddata = get_val(®s->mmcdrr); + memcpy(data_buf, (char *)&cmddata, 4); + data_buf += 4; + bytes_left -= 4; + } + } else { + /* + * MMC controller sets the Data transmit ready bit + * (DXRDY) in MMCST0 even before the entire FIFO is + * empty. This results in erratic behavior if we start + * writing the FIFO soon after DXRDY. Wait for the + * FIFO empty bit in MMCST1 for proper FIFO clearing. + */ + dmmc_wait_fifo_status(regs, MMCST1_FIFOEMP); + for (i = 0; bytes_left && (i < fifo_words); i++) { + memcpy((char *)&cmddata, data_buf, 4); + set_val(®s->mmcdxr, cmddata); + data_buf += 4; + bytes_left -= 4; + } + dmmc_busy_wait(regs); + } + } + + err = dmmc_check_status(regs, &mmcstatus, MMCST0_DATDNE, status_err); + if (err) + return err; + + return 0; +} + +/* Initialize Davinci MMC controller */ +static int dmmc_init(struct mmc *mmc) +{ + struct davinci_mmc *host = mmc->priv; + struct davinci_mmc_regs *regs = host->reg_base; + + /* Clear status registers explicitly - soft reset doesn't clear it + * If Uboot is invoked from UBL with SDMMC Support, the status + * registers can have uncleared bits + */ + get_val(®s->mmcst0); + get_val(®s->mmcst1); + + /* Hold software reset */ + set_bit(®s->mmcctl, MMCCTL_DATRST); + set_bit(®s->mmcctl, MMCCTL_CMDRST); + udelay(10); + + set_val(®s->mmcclk, 0x0); + set_val(®s->mmctor, 0x1FFF); + set_val(®s->mmctod, 0xFFFF); + + /* Clear software reset */ + clear_bit(®s->mmcctl, MMCCTL_DATRST); + clear_bit(®s->mmcctl, MMCCTL_CMDRST); + + udelay(10); + + /* Reset FIFO - Always use the maximum fifo threshold */ + set_val(®s->mmcfifoctl, (MMCFIFOCTL_FIFOLEV | MMCFIFOCTL_FIFORST)); + set_val(®s->mmcfifoctl, MMCFIFOCTL_FIFOLEV); + + return 0; +} + +/* Set buswidth or clock as indicated by the GENERIC_MMC framework */ +static void dmmc_set_ios(struct mmc *mmc) +{ + struct davinci_mmc *host = mmc->priv; + struct davinci_mmc_regs *regs = host->reg_base; + + /* Set the bus width */ + if (mmc->bus_width == 4) + set_bit(®s->mmcctl, MMCCTL_WIDTH_4_BIT); + else + clear_bit(®s->mmcctl, MMCCTL_WIDTH_4_BIT); + + /* Set clock speed */ + if (mmc->clock) + dmmc_set_clock(mmc, mmc->clock); +} + +/* Called from board_mmc_init during startup. Can be called multiple times + * depending on the number of slots available on board and controller + */ +int davinci_mmc_init(bd_t *bis, struct davinci_mmc *host) +{ + struct mmc *mmc; + + mmc = malloc(sizeof(struct mmc)); + memset(mmc, 0, sizeof(struct mmc)); + + sprintf(mmc->name, "davinci"); + mmc->priv = host; + mmc->send_cmd = dmmc_send_cmd; + mmc->set_ios = dmmc_set_ios; + mmc->init = dmmc_init; + + mmc->f_min = 200000; + mmc->f_max = 25000000; + mmc->voltages = host->voltages; + mmc->host_caps = host->host_caps; + +#ifdef CONFIG_MMC_MBLOCK + mmc->b_max = DAVINCI_MAX_BLOCKS; +#endif + mmc_register(mmc); + + return 0; +} + diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index ec71cfc..2a8dd7e 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -22,7 +22,7 @@ #include <nand.h> #include <linux/err.h> #include <asm/io.h> -#if defined(CONFIG_MX25) || defined(CONFIG_MX27) +#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) #include <asm/arch/imx-regs.h> #endif @@ -50,7 +50,7 @@ */ #if defined(CONFIG_MX31) || defined(CONFIG_MX27) #define MXC_NFC_V1 -#elif defined(CONFIG_MX25) +#elif defined(CONFIG_MX25) || defined(CONFIG_MX35) #define MXC_NFC_V1_1 #else #warning "MXC NFC version not defined" @@ -265,7 +265,7 @@ static int is_16bit_nand(void) else return 0; } -#elif defined(CONFIG_MX25) +#elif defined(CONFIG_MX25) || defined(CONFIG_MX35) static int is_16bit_nand(void) { struct ccm_regs *ccm = diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 56cd2aa..c359f54 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -322,9 +322,10 @@ static void __attribute__((unused)) davinci_eth_gigabit_enable(void) * Check if link detected is giga-bit * If Gigabit mode detected, enable gigbit in MAC */ - writel(EMAC_MACCONTROL_GIGFORCE | - EMAC_MACCONTROL_GIGABIT_ENABLE, - &adap_emac->MACCONTROL); + writel(readl(&adap_emac->MACCONTROL) | + EMAC_MACCONTROL_GIGFORCE | + EMAC_MACCONTROL_GIGABIT_ENABLE, + &adap_emac->MACCONTROL); } } } @@ -666,6 +667,7 @@ int davinci_emac_initialize(void) return -1; memset(dev, 0, sizeof *dev); + sprintf(dev->name, "DaVinci-EMAC"); dev->iobase = 0; dev->init = davinci_eth_open; @@ -723,6 +725,13 @@ int davinci_emac_initialize(void) phy.get_link_speed = dp83848_get_link_speed; phy.auto_negotiate = dp83848_auto_negotiate; break; + case PHY_ET1011C: + sprintf(phy.name, "ET1011C @ 0x%02x", active_phy_addr); + phy.init = gen_init_phy; + phy.is_phy_connected = gen_is_phy_connected; + phy.get_link_speed = et1011c_get_link_speed; + phy.auto_negotiate = gen_auto_negotiate; + break; default: sprintf(phy.name, "GENERIC @ 0x%02x", active_phy_addr); phy.init = gen_init_phy; diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index c438962..4e4cd27 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -354,7 +354,7 @@ static int fec_open(struct eth_device *edev) */ writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl); -#ifdef CONFIG_MX25 +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) udelay(100); /* * setup the MII gasket for RMII mode diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h index 5d0d69d..1ba5161 100644 --- a/drivers/net/fec_mxc.h +++ b/drivers/net/fec_mxc.h @@ -147,7 +147,7 @@ struct ethernet_regs { uint32_t res14[7]; /* MBAR_ETH + 0x2E4-2FC */ -#ifdef CONFIG_MX25 +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) uint16_t miigsk_cfgr; /* MBAR_ETH + 0x300 */ uint16_t res15[3]; /* MBAR_ETH + 0x302-306 */ uint16_t miigsk_enr; /* MBAR_ETH + 0x308 */ @@ -204,7 +204,7 @@ struct ethernet_regs { #define FEC_ECNTRL_RESET 0x00000001 /* reset the FEC */ #define FEC_ECNTRL_ETHER_EN 0x00000002 /* enable the FEC */ -#ifdef CONFIG_MX25 +#if defined(CONFIG_MX25) || defined(CONFIG_MX53) /* defines for MIIGSK */ /* RMII frequency control: 0=50MHz, 1=5MHz */ #define MIIGSK_CFGR_FRCONT (1 << 6) diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index f96b21f..b9cf9de 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -50,11 +50,14 @@ #define UART_PHYS 0x1001b000 #elif defined(CONFIG_SYS_MX27_UART6) #define UART_PHYS 0x1001c000 -#elif defined(CONFIG_SYS_MX51_UART1) +#elif defined(CONFIG_SYS_MX35_UART1) || defined(CONFIG_SYS_MX51_UART1) || \ + defined(CONFIG_SYS_MX53_UART1) #define UART_PHYS UART1_BASE_ADDR -#elif defined(CONFIG_SYS_MX51_UART2) +#elif defined(CONFIG_SYS_MX35_UART2) || defined(CONFIG_SYS_MX51_UART2) || \ + defined(CONFIG_SYS_MX53_UART2) #define UART_PHYS UART2_BASE_ADDR -#elif defined(CONFIG_SYS_MX51_UART3) +#elif defined(CONFIG_SYS_MX35_UART3) || defined(CONFIG_SYS_MX51_UART3) || \ + defined(CONFIG_SYS_MX53_UART3) #define UART_PHYS UART3_BASE_ADDR #else #error "define CONFIG_SYS_MXxx_UARTx to use the MXC UART driver" diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index 9c1cbf4..f1ffa29 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -72,7 +72,7 @@ void serial_setbrg_dev(const int dev_index) writel(val / 16 - 1, &uart->ubrdiv); - if (use_divslot) + if (s5p_uart_divslot()) writew(udivslot[val % 16], &uart->rest.slot); else writeb(val % 16, &uart->rest.value); diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index d558137..6474eb8 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -36,16 +36,6 @@ #include <asm/arch/mx31.h> -#define MXC_CSPIRXDATA 0x00 -#define MXC_CSPITXDATA 0x04 -#define MXC_CSPICTRL 0x08 -#define MXC_CSPIINT 0x0C -#define MXC_CSPIDMA 0x10 -#define MXC_CSPISTAT 0x14 -#define MXC_CSPIPERIOD 0x18 -#define MXC_CSPITEST 0x1C -#define MXC_CSPIRESET 0x00 - #define MXC_CSPICTRL_EN (1 << 0) #define MXC_CSPICTRL_MODE (1 << 1) #define MXC_CSPICTRL_XCH (1 << 2) @@ -70,19 +60,12 @@ static unsigned long spi_bases[] = { 0x53f84000, }; +#define mxc_get_clock(x) mx31_get_ipg_clk() + #elif defined(CONFIG_MX51) #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> -#define MXC_CSPIRXDATA 0x00 -#define MXC_CSPITXDATA 0x04 -#define MXC_CSPICTRL 0x08 -#define MXC_CSPICON 0x0C -#define MXC_CSPIINT 0x10 -#define MXC_CSPIDMA 0x14 -#define MXC_CSPISTAT 0x18 -#define MXC_CSPIPERIOD 0x1C -#define MXC_CSPIRESET 0x00 #define MXC_CSPICTRL_EN (1 << 0) #define MXC_CSPICTRL_MODE (1 << 1) #define MXC_CSPICTRL_XCH (1 << 2) @@ -111,12 +94,44 @@ static unsigned long spi_bases[] = { CSPI2_BASE_ADDR, CSPI3_BASE_ADDR, }; + +#elif defined(CONFIG_MX35) + +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> + +#define MXC_CSPICTRL_EN (1 << 0) +#define MXC_CSPICTRL_MODE (1 << 1) +#define MXC_CSPICTRL_XCH (1 << 2) +#define MXC_CSPICTRL_SMC (1 << 3) +#define MXC_CSPICTRL_POL (1 << 4) +#define MXC_CSPICTRL_PHA (1 << 5) +#define MXC_CSPICTRL_SSCTL (1 << 6) +#define MXC_CSPICTRL_SSPOL (1 << 7) +#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 12) +#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0xfff) << 20) +#define MXC_CSPICTRL_DATARATE(x) (((x) & 0x7) << 16) +#define MXC_CSPICTRL_TC (1 << 7) +#define MXC_CSPICTRL_RXOVF (1 << 6) +#define MXC_CSPICTRL_MAXBITS 0xfff + +#define MXC_CSPIPERIOD_32KHZ (1 << 15) +#define MAX_SPI_BYTES 4 + +static unsigned long spi_bases[] = { + 0x43fa4000, + 0x50010000, +}; + #else #error "Unsupported architecture" #endif #define OUT MXC_GPIO_DIRECTION_OUT +#define reg_read readl +#define reg_write(a, v) writel(v, a) + struct mxc_spi_slave { struct spi_slave slave; unsigned long base; @@ -133,16 +148,6 @@ static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave) return container_of(slave, struct mxc_spi_slave, slave); } -static inline u32 reg_read(unsigned long addr) -{ - return *(volatile unsigned long*)addr; -} - -static inline void reg_write(unsigned long addr, u32 val) -{ - *(volatile unsigned long*)addr = val; -} - void spi_cs_activate(struct spi_slave *slave) { struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); @@ -158,24 +163,73 @@ void spi_cs_deactivate(struct spi_slave *slave) !(mxcs->ss_pol)); } -#ifdef CONFIG_MX51 -static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs, +u32 get_cspi_div(u32 div) +{ + int i; + + for (i = 0; i < 8; i++) { + if (div <= (4 << i)) + return i; + } + return i; +} + +#if defined(CONFIG_MX31) || defined(CONFIG_MX35) +static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + unsigned int ctrl_reg; + u32 clk_src; + u32 div; + + clk_src = mxc_get_clock(MXC_CSPI_CLK); + + div = clk_src / max_hz; + div = get_cspi_div(div); + + debug("clk %d Hz, div %d, real clk %d Hz\n", + max_hz, div, clk_src / (4 << div)); + + ctrl_reg = MXC_CSPICTRL_CHIPSELECT(cs) | + MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS) | + MXC_CSPICTRL_DATARATE(div) | + MXC_CSPICTRL_EN | +#ifdef CONFIG_MX35 + MXC_CSPICTRL_SSCTL | +#endif + MXC_CSPICTRL_MODE; + + if (mode & SPI_CPHA) + ctrl_reg |= MXC_CSPICTRL_PHA; + if (mode & SPI_CPOL) + ctrl_reg |= MXC_CSPICTRL_POL; + if (mode & SPI_CS_HIGH) + ctrl_reg |= MXC_CSPICTRL_SSPOL; + mxcs->ctrl_reg = ctrl_reg; + + return 0; +} +#endif + +#if defined(CONFIG_MX51) +static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, unsigned int max_hz, unsigned int mode) { u32 clk_src = mxc_get_clock(MXC_CSPI_CLK); s32 pre_div = 0, post_div = 0, i, reg_ctrl, reg_config; u32 ss_pol = 0, sclkpol = 0, sclkpha = 0; + struct cspi_regs *regs = (struct cspi_regs *)mxcs->base; if (max_hz == 0) { printf("Error: desired clock is 0\n"); return -1; } - reg_ctrl = reg_read(mxcs->base + MXC_CSPICTRL); + reg_ctrl = reg_read(®s->ctrl); /* Reset spi */ - reg_write(mxcs->base + MXC_CSPICTRL, 0); - reg_write(mxcs->base + MXC_CSPICTRL, (reg_ctrl | 0x1)); + reg_write(®s->ctrl, 0); + reg_write(®s->ctrl, (reg_ctrl | 0x1)); /* * The following computation is taken directly from Freescale's code. @@ -223,11 +277,11 @@ static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs, if (mode & SPI_CPHA) sclkpha = 1; - reg_config = reg_read(mxcs->base + MXC_CSPICON); + reg_config = reg_read(®s->cfg); /* * Configuration register setup - * The MX51 has support different setup for each SS + * The MX51 supports different setup for each SS */ reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_SSPOL))) | (ss_pol << (cs + MXC_CSPICON_SSPOL)); @@ -237,18 +291,17 @@ static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs, (sclkpha << (cs + MXC_CSPICON_PHA)); debug("reg_ctrl = 0x%x\n", reg_ctrl); - reg_write(mxcs->base + MXC_CSPICTRL, reg_ctrl); + reg_write(®s->ctrl, reg_ctrl); debug("reg_config = 0x%x\n", reg_config); - reg_write(mxcs->base + MXC_CSPICON, reg_config); + reg_write(®s->cfg, reg_config); /* save config register and control register */ mxcs->ctrl_reg = reg_ctrl; mxcs->cfg_reg = reg_config; /* clear interrupt reg */ - reg_write(mxcs->base + MXC_CSPIINT, 0); - reg_write(mxcs->base + MXC_CSPISTAT, - MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF); + reg_write(®s->intr, 0); + reg_write(®s->stat, MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF); return 0; } @@ -260,6 +313,7 @@ int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen, struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); int nbytes = (bitlen + 7) / 8; u32 data, cnt, i; + struct cspi_regs *regs = (struct cspi_regs *)mxcs->base; debug("%s: bitlen %d dout 0x%x din 0x%x\n", __func__, bitlen, (u32)dout, (u32)din); @@ -268,14 +322,13 @@ int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen, ~MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS)) | MXC_CSPICTRL_BITCOUNT(bitlen - 1); - reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg | MXC_CSPICTRL_EN); + reg_write(®s->ctrl, mxcs->ctrl_reg | MXC_CSPICTRL_EN); #ifdef CONFIG_MX51 - reg_write(mxcs->base + MXC_CSPICON, mxcs->cfg_reg); + reg_write(®s->cfg, mxcs->cfg_reg); #endif /* Clear interrupt register */ - reg_write(mxcs->base + MXC_CSPISTAT, - MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF); + reg_write(®s->stat, MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF); /* * The SPI controller works only with words, @@ -292,7 +345,7 @@ int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen, } debug("Sending SPI 0x%x\n", data); - reg_write(mxcs->base + MXC_CSPITXDATA, data); + reg_write(®s->txdata, data); nbytes -= cnt; } @@ -304,9 +357,8 @@ int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen, /* Buffer is not 32-bit aligned */ if ((unsigned long)dout & 0x03) { data = 0; - for (i = 0; i < 4; i++, data <<= 8) { + for (i = 0; i < 4; i++) data = (data << 8) | (*dout++ & 0xFF); - } } else { data = *(u32 *)dout; data = cpu_to_be32(data); @@ -314,41 +366,40 @@ int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen, dout += 4; } debug("Sending SPI 0x%x\n", data); - reg_write(mxcs->base + MXC_CSPITXDATA, data); + reg_write(®s->txdata, data); nbytes -= 4; } /* FIFO is written, now starts the transfer setting the XCH bit */ - reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg | + reg_write(®s->ctrl, mxcs->ctrl_reg | MXC_CSPICTRL_EN | MXC_CSPICTRL_XCH); /* Wait until the TC (Transfer completed) bit is set */ - while ((reg_read(mxcs->base + MXC_CSPISTAT) & MXC_CSPICTRL_TC) == 0) + while ((reg_read(®s->stat) & MXC_CSPICTRL_TC) == 0) ; /* Transfer completed, clear any pending request */ - reg_write(mxcs->base + MXC_CSPISTAT, - MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF); + reg_write(®s->stat, MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF); nbytes = (bitlen + 7) / 8; cnt = nbytes % 32; if (bitlen % 32) { - data = reg_read(mxcs->base + MXC_CSPIRXDATA); + data = reg_read(®s->rxdata); cnt = (bitlen % 32) / 8; + data = cpu_to_be32(data) >> ((sizeof(data) - cnt) * 8); debug("SPI Rx unaligned: 0x%x\n", data); if (din) { - for (i = 0; i < cnt; i++, data >>= 8) { - *din++ = data & 0xFF; - } + memcpy(din, &data, cnt); + din += cnt; } nbytes -= cnt; } while (nbytes > 0) { u32 tmp; - tmp = reg_read(mxcs->base + MXC_CSPIRXDATA); + tmp = reg_read(®s->rxdata); data = cpu_to_be32(tmp); debug("SPI Rx: 0x%x 0x%x\n", tmp, data); cnt = min(nbytes, sizeof(data)); @@ -363,7 +414,6 @@ int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen, } - int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, void *din, unsigned long flags) { @@ -381,7 +431,6 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, spi_cs_activate(slave); while (n_bytes > 0) { - if (n_bytes < MAX_SPI_BYTES) blk_size = n_bytes; else @@ -441,7 +490,6 @@ static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs) struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { - unsigned int ctrl_reg; struct mxc_spi_slave *mxcs; int ret; @@ -467,30 +515,12 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, mxcs->base = spi_bases[bus]; mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0; -#ifdef CONFIG_MX51 - /* Can be used for i.MX31 too ? */ - ctrl_reg = 0; - ret = spi_cfg(mxcs, cs, max_hz, mode); + ret = spi_cfg_mxc(mxcs, cs, max_hz, mode); if (ret) { printf("mxc_spi: cannot setup SPI controller\n"); free(mxcs); return NULL; } -#else - ctrl_reg = MXC_CSPICTRL_CHIPSELECT(cs) | - MXC_CSPICTRL_BITCOUNT(31) | - MXC_CSPICTRL_DATARATE(7) | /* FIXME: calculate data rate */ - MXC_CSPICTRL_EN | - MXC_CSPICTRL_MODE; - - if (mode & SPI_CPHA) - ctrl_reg |= MXC_CSPICTRL_PHA; - if (mode & SPI_CPOL) - ctrl_reg |= MXC_CSPICTRL_POL; - if (mode & SPI_CS_HIGH) - ctrl_reg |= MXC_CSPICTRL_SSPOL; - mxcs->ctrl_reg = ctrl_reg; -#endif return &mxcs->slave; } @@ -504,13 +534,13 @@ void spi_free_slave(struct spi_slave *slave) int spi_claim_bus(struct spi_slave *slave) { struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); + struct cspi_regs *regs = (struct cspi_regs *)mxcs->base; - reg_write(mxcs->base + MXC_CSPIRESET, 1); + reg_write(®s->rxdata, 1); udelay(1); - reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg); - reg_write(mxcs->base + MXC_CSPIPERIOD, - MXC_CSPIPERIOD_32KHZ); - reg_write(mxcs->base + MXC_CSPIINT, 0); + reg_write(®s->ctrl, mxcs->ctrl_reg); + reg_write(®s->period, MXC_CSPIPERIOD_32KHZ); + reg_write(®s->intr, 0); return 0; } diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h index f67cf06..27f137f 100644 --- a/include/configs/a320evb.h +++ b/include/configs/a320evb.h @@ -138,15 +138,21 @@ #define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ + GENERATED_GBL_DATA_SIZE) + /* * Load address and memory test area should agree with * board/faraday/a320/config.mk. Be careful not to overwrite U-boot itself. */ -#define CONFIG_SYS_LOAD_ADDR 0x12000000 +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x2000000) /* memtest works on 63 MB in DRAM */ -#define CONFIG_SYS_MEMTEST_START 0x10000000 -#define CONFIG_SYS_MEMTEST_END 0x13F00000 +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x3F00000) + +#define CONFIG_SYS_TEXT_BASE 0 /*----------------------------------------------------------------------- * Static memory controller configuration @@ -215,7 +221,7 @@ /* environments */ #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR 0x00060000 +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) #define CONFIG_ENV_SIZE 0x20000 #endif /* __CONFIG_H */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h new file mode 100644 index 0000000..510c6d4 --- /dev/null +++ b/include/configs/cm_t35.h @@ -0,0 +1,352 @@ +/* + * (C) Copyright 2010 + * CompuLab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * Based on omap3_beagle.h + * (C) Copyright 2006-2008 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * Configuration settings for the CompuLab CM-T35 board + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ +#define CONFIG_CM_T35 1 /* working with CM-T35 */ + +#define CONFIG_SYS_TEXT_BASE 0x80008000 + +#define CONFIG_SDRC /* The chip has SDRC controller */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_OF_LIBFDT 1 +/* + * The early kernel mapping on ARM currently only maps from the base of DRAM + * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000. + * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000, + * so that leaves DRAM base to DRAM base + 0x4000 available. + */ +#define CONFIG_SYS_BOOTMAPSZ 0x4000 + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) + /* initial data */ + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_MMC 1 +#define CONFIG_OMAP_HSMMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + +/* USB */ +#define CONFIG_MUSB_UDC 1 +#define CONFIG_USB_OMAP3 1 +#define CONFIG_TWL4030_USB 1 + +/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ +#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ + "1920k(u-boot),128k(u-boot-env),"\ + "4m(kernel),-(fs)" + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +/* + * TWL4030 + */ +#define CONFIG_TWL4030_POWER 1 +#define CONFIG_TWL4030_LED 1 + +/* + * Board NAND Info. + */ +#define CONFIG_SYS_NAND_QUIET_TEST 1 +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand at */ + /* CS0 */ +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ + /* partition */ + +/* Environment information */ +#define CONFIG_BOOTDELAY 10 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "usbtty=cdc_acm\0" \ + "console=ttyS2,115200n8\0" \ + "mpurate=500\0" \ + "vram=12M\0" \ + "dvimode=1024x768MR-16@60\0" \ + "defaultdisplay=dvi\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "nandroot=/dev/mtdblock4 rw\0" \ + "nandrootfstype=jffs2\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapfb.debug=y " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "nandargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapfb.debug=y " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan ${mmcdev}; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +#define CONFIG_AUTO_COMPLETE 1 +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "CM-T35 # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ + /* works on */ +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ + /* load address */ + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* CS1 is never populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +#define CONFIG_SYS_FLASH_BASE boot_flash_base + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP + +#define CONFIG_ENV_IS_IN_NAND 1 +#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + +#ifndef __ASSEMBLY__ +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + +#if defined(CONFIG_CMD_NET) +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CM_T35_SMC911X_BASE 0x2C000000 +#define SB_T35_SMC911X_BASE (CM_T35_SMC911X_BASE + (16 << 20)) +#define CONFIG_SMC911X_BASE CM_T35_SMC911X_BASE +#endif /* (CONFIG_CMD_NET) */ + +/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index 90f8e7c..56d0ac9 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -76,6 +76,13 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 2 +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DAVINCI_MMC +#define CONFIG_DAVINCI_MMC_SD1 +#define CONFIG_MMC_MBLOCK + /* USB: OTG connector */ /* NYET -- #define CONFIG_USB_DAVINCI */ @@ -93,6 +100,13 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES +#ifdef CONFIG_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MMC +#endif + #ifdef CONFIG_NAND_DAVINCI #define CONFIG_CMD_MTDPARTS #define CONFIG_MTD_PARTITIONS @@ -134,6 +148,14 @@ #undef CONFIG_ENV_IS_IN_FLASH #endif +#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND) +#define CONFIG_CMD_ENV +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ +#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ +#define CONFIG_ENV_IS_IN_MMC +#undef CONFIG_ENV_IS_IN_FLASH +#endif + #define CONFIG_BOOTDELAY 5 #define CONFIG_BOOTCOMMAND \ "dhcp;bootm" diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index a36e138..2825050 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -85,6 +85,13 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 2 +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DAVINCI_MMC +#define CONFIG_DAVINCI_MMC_SD1 +#define CONFIG_MMC_MBLOCK + #define PINMUX4_USBDRVBUS_BITCLEAR 0x3000 #define PINMUX4_USBDRVBUS_BITSET 0x2000 @@ -137,6 +144,13 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES +#ifdef CONFIG_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MMC +#endif + #ifdef CONFIG_NAND_DAVINCI #define CONFIG_CMD_MTDPARTS #define CONFIG_MTD_PARTITIONS @@ -168,6 +182,14 @@ #undef CONFIG_ENV_IS_IN_FLASH #endif +#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND) +#define CONFIG_CMD_ENV +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ +#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ +#define CONFIG_ENV_IS_IN_MMC +#undef CONFIG_ENV_IS_IN_FLASH +#endif + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND \ "dhcp;bootm" diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 3ef4555..a0a30f5 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -22,13 +22,26 @@ /* Spectrum Digital TMS320DM6467 EVM board */ #define DAVINCI_DM6467EVM +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_USE_NAND +#define CONFIG_SYS_NAND_SMALLPAGE #define CONFIG_SKIP_LOWLEVEL_INIT /* SoC Configuration */ #define CONFIG_ARM926EJS /* arm926ejs CPU */ + +/* Clock rates detection */ +#ifndef __ASSEMBLY__ +extern unsigned int davinci_arm_clk_get(void); +#endif + +#define CFG_REFCLK_FREQ 27000000 +/* Arm Clock frequency */ +#define CONFIG_SYS_CLK_FREQ davinci_arm_clk_get() +/* Timer Input clock freq */ +#define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2) #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 #define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM646X @@ -69,6 +82,18 @@ #define CONFIG_SYS_I2C_SPEED 80000 #define CONFIG_SYS_I2C_SLAVE 10 +/* Network & Ethernet Configuration */ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_EMAC_MDIO_PHY_NUM 1 +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#define CONFIG_CMD_NET + /* Flash & Environment */ #define CONFIG_SYS_NO_FLASH #ifdef CONFIG_SYS_USE_NAND @@ -116,7 +141,8 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_SAVES #define CONFIG_CMD_EEPROM -#undef CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP #undef CONFIG_CMD_BDI #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_SETGETDCR diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index ebfdafa..2336129 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -139,6 +139,7 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ #define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */ #define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*2) +#define CONFIG_ENV_SIZE CONFIG_SYS_FLASH_SECT_SZ #define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ #define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h new file mode 100644 index 0000000..1424347 --- /dev/null +++ b/include/configs/efikamx.h @@ -0,0 +1,232 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * Configuration settings for the MX51EVK Board + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <config_cmd_default.h> + +/* + * High Level Board Configuration Options + */ +/* An i.MX51 CPU */ +#define CONFIG_MX51 +#include <asm/arch/imx-regs.h> + +#define CONFIG_SYS_MX5_HCLK 24000000 +#define CONFIG_SYS_MX5_CLK32 32768 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_L2_OFF + +/* + * Bootloader Components Configuration + */ +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#undef CONFIG_CMD_IMLS + +/* + * Environmental settings + */ + +#define CONFIG_ENV_OFFSET (6 * 64 * 1024) +#define CONFIG_ENV_SECT_SIZE (1 * 64 * 1024) +#define CONFIG_ENV_SIZE (4 * 1024) + +/* + * ATAG setup + */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F +#define BOARD_LATE_INIT + +/* + * Hardware drivers + */ +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX51_UART1 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +#define CONFIG_MXC_GPIO + +/* + * SPI Interface + */ +#ifdef CONFIG_CMD_SPI + +#define CONFIG_HARD_SPI +#define CONFIG_MXC_SPI +#define CONFIG_DEFAULT_SPI_BUS 1 +#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) + +/* SPI FLASH */ +#ifdef CONFIG_CMD_SF + +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SST +#define CONFIG_SPI_FLASH_CS (1 | 121 << 8) +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) +#define CONFIG_SF_DEFAULT_SPEED 25000000 + +#define CONFIG_ENV_SPI_CS (1 | 121 << 8) +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_MAX_HZ 25000000 +#define CONFIG_ENV_SPI_MODE (SPI_MODE_0) +#define CONFIG_FSL_ENV_IN_SF +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SYS_NO_FLASH + +#else +#define CONFIG_ENV_IS_NOWHERE +#endif + +/* SPI PMIC */ +#define CONFIG_FSL_PMIC +#define CONFIG_FSL_PMIC_BUS 0 +#define CONFIG_FSL_PMIC_CS (0 | 120 << 8) +#define CONFIG_FSL_PMIC_CLK 25000000 +#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) +#define CONFIG_RTC_MC13783 +#endif + +/* + * MMC Configs + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_NUM 2 +#endif + +/* + * ATA/IDE + */ +#ifdef CONFIG_CMD_IDE +#define CONFIG_LBA48 +#undef CONFIG_IDE_LED +#undef CONFIG_IDE_RESET + +#define CONFIG_MX51_PATA + +#define __io + +#define CONFIG_SYS_IDE_MAXBUS 1 +#define CONFIG_SYS_IDE_MAXDEVICE 1 + +#define CONFIG_SYS_ATA_BASE_ADDR 0x83fe0000 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0 + +#define CONFIG_SYS_ATA_DATA_OFFSET 0xa0 +#define CONFIG_SYS_ATA_REG_OFFSET 0xa0 +#define CONFIG_SYS_ATA_ALT_OFFSET 0xd8 + +#define CONFIG_SYS_ATA_STRIDE 4 + +#define CONFIG_IDE_PREINIT +#define CONFIG_MXC_ATA_PIO_MODE 4 +#endif + +/* + * Filesystems + */ +#ifdef CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#undef CONFIG_CMD_PING +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#define CONFIG_CMD_DATE + +/* + * Miscellaneous configurable options + */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BOOTDELAY 3 +#define CONFIG_LOADADDR 0x90800000 + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "Efika> " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x90000000 +#define CONFIG_SYS_MEMTEST_END 0x10000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_CMDLINE_EDITING + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) +#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_DDR_CLKSEL 0 +#define CONFIG_SYS_CLKTL_CBCDR 0x59E35100 + +#endif diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h new file mode 100644 index 0000000..086355b --- /dev/null +++ b/include/configs/mx35pdk.h @@ -0,0 +1,303 @@ +/* + * (C) Copyright 2010, Stefano Babic <sbabic@denx.de> + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * Configuration for the MX35pdk Freescale board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> + + /* High Level Configuration Options */ +#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ +#define CONFIG_MX35 +#define CONFIG_MX35_HCLK_FREQ 24000000 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Set TEXT at the beginning of the NOR flash */ +#define CONFIG_SYS_TEXT_BASE 0xA0000000 + +#define CONFIG_SYS_64BIT_VSPRINTF + +#define CONFIG_BOARD_EARLY_INIT_F +#define BOARD_LATE_INIT + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) + +/* + * Hardware drivers + */ +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_MX35_PORT1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0xfe +#define CONFIG_MXC_SPI + + +/* + * PMIC Configs + */ +#define CONFIG_FSL_PMIC +#define CONFIG_FSL_PMIC_I2C +#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 + +/* + * MFD MC9SDZ60 + */ +#define CONFIG_FSL_MC9SDZ60 +#define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR 0x69 + +/* + * UART (console) + */ +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX35_UART1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* + * Command definition + */ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_DNS + +#define CONFIG_CMD_NAND + +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SPI +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_NET_RETRY_COUNT 100 + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ + +/* + * Ethernet on the debug board (SMC911) + */ +#define CONFIG_SMC911X +#define CONFIG_SMC911X_16_BIT 1 +#define CONFIG_SMC911X_BASE CS5_BASE_ADDR + +#define CONFIG_HAS_ETH1 +#define CONFIG_NET_MULTI +#define CONFIG_ETHPRIME + +/* + * Ethernet on SOC (FEC) + */ +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE FEC_BASE_ADDR +#define CONFIG_FEC_MXC_PHYADDR 0x1F + +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY + +#define CONFIG_ARP_TIMEOUT 200UL + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "MX35 U-Boot > " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x10000 + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 + + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) +#define iomem_valid_addr(addr, size) \ + (addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)) + +#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) +#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_GBL_DATA_OFFSET) + +/* + * MTD Command for mtdparts + */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_FLASH_CFI_MTD +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0" +#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:1m(boot),5m(linux)," \ + "96m(root),8m(cfg),1938m(user);" \ + "physmap-flash.0:512k(b),4m(k),30m(u),28m(r)" + +/* + * FLASH and environment organization + */ +#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +/* Monitor at beginning of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) + +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) + +#define CONFIG_ENV_IS_IN_FLASH + +#if defined(CONFIG_FSL_ENV_IN_NAND) + #define CONFIG_ENV_IS_IN_NAND + #define CONFIG_ENV_OFFSET (1024 * 1024) +#endif + +/* + * CFI FLASH driver setup + */ +#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER + +/* A non-standard buffered write algorithm */ +#define CONFIG_FLASH_SPANSION_S29WS_N +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */ +#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ + +/* + * NAND FLASH driver setup + */ +#define CONFIG_NAND_MXC +#define CONFIG_NAND_MXC_V1_1 +#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) +#define CONFIG_MXC_NAND_HWECC +#define CONFIG_SYS_NAND_LARGEPAGE + +/* + * Default environment and default scripts + * to update uboot and load kernel + */ +#define xstr(s) str(s) +#define str(s) #s + +#define CONFIG_HOSTNAME "mx35pdk" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth1\0" \ + "ethprime=smc911x\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip_sta=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ + "addip=if test -n ${ipdyn};then run addip_dyn;" \ + "else run addip_sta;fi\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=ttymxc0,${baudrate}\0" \ + "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ + "loadaddr=80800000\0" \ + "kernel_addr_r=80800000\0" \ + "hostname=" xstr(CONFIG_HOSTNAME) "\0" \ + "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ + "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \ + "flash_self=run ramargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ + "run nfsargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr_r}\0" \ + "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0" \ + "update=protect off ${uboot_addr} +40000;" \ + "erase ${uboot_addr} +40000;" \ + "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ + "upd=if run load;then echo Updating u-boot;if run update;" \ + "then echo U-Boot updated;" \ + "else echo Error updating u-boot !;" \ + "echo Board without bootloader !!;" \ + "fi;" \ + "else echo U-Boot not downloaded..exiting;fi\0" \ + "bootcmd=run net_nfs\0" + +#endif /* __CONFIG_H */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index b4e5738..591d6e1 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -24,8 +24,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/arch/imx-regs.h> - /* High Level Configuration Options */ #define CONFIG_MX51 /* in a mx51 */ @@ -37,6 +35,7 @@ #define CONFIG_L2_OFF +#include <asm/arch/imx-regs.h> /* * Disabled for now due to build problems under Debian and a significant * increase in the final file size: 144260 vs. 109536 Bytes. @@ -203,6 +202,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) +#define CONFIG_BOARD_EARLY_INIT_F + #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h new file mode 100644 index 0000000..f2a5752 --- /dev/null +++ b/include/configs/mx53evk.h @@ -0,0 +1,193 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * Configuration settings for the MX53-EVK Freescale board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MX53 + +#define CONFIG_SYS_MX5_HCLK 24000000 +#define CONFIG_SYS_MX5_CLK32 32768 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_L2_OFF + +#include <asm/arch/imx-regs.h> + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F +#define BOARD_LATE_INIT +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX53_UART1 + +/* I2C Configs */ +#define CONFIG_CMD_I2C 1 +#define CONFIG_HARD_I2C 1 +#define CONFIG_I2C_MXC 1 +#define CONFIG_SYS_I2C_MX53_PORT2 1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0xfe + +/* PMIC Configs */ +#define CONFIG_FSL_PMIC +#define CONFIG_FSL_PMIC_I2C +#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8 + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_NUM 2 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +/* Eth Configs */ +#define CONFIG_HAS_ETH1 +#define CONFIG_NET_MULTI +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY + +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE FEC_BASE_ADDR +#define CONFIG_FEC_MXC_PHYADDR 0x1F + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_PRIME "FEC0" + +#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ +#define CONFIG_SYS_TEXT_BASE 0x77800000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ + "mmcdev=0\0" \ + "mmcpart=2\0" \ + "mmcroot=/dev/mmcblk0p3 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm\0" \ + "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "dhcp ${uimage}; bootm\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan ${mmcdev}; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" + +#define CONFIG_ARP_TIMEOUT 200UL + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "MX53EVK U-Boot > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x70000000 +#define CONFIG_SYS_MEMTEST_END 0x10000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_CMDLINE_EDITING + +/* Stack sizes */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) +#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_OFFSET (6 * 64 * 1024) +#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#endif /* __CONFIG_H */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h new file mode 100644 index 0000000..c033a8d --- /dev/null +++ b/include/configs/s5pc210_universal.h @@ -0,0 +1,244 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * Configuation settings for the SAMSUNG Universal (s5pc100) board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ +#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ +#define CONFIG_S5P 1 /* which is in a S5P Family */ +#define CONFIG_S5PC210 1 /* which is in a S5PC210 */ +#define CONFIG_UNIVERSAL 1 /* working with Universal */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Keep L2 Cache Disabled */ +#define CONFIG_L2_OFF 1 + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_TEXT_BASE 0x44800000 + +/* input clock of PLL: Universal has 24MHz input clock at S5PC210 */ +#define CONFIG_SYS_CLK_FREQ_C210 24000000 + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_CMDLINE_EDITING + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) + +/* select serial console configuration */ +#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_SERIAL2 1 /* use SERIAL 2 */ +#define CONFIG_BAUDRATE 115200 + +/* MMC */ +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_MMC 1 +#define CONFIG_S5P_MMC 1 + +/* It should define before config_cmd_default.h */ +#define CONFIG_SYS_NO_FLASH 1 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_XIMG +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_ONENAND +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT + +#define CONFIG_BOOTDELAY 1 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ +#define MTDIDS_DEFAULT "onenand0=samsung-onenand" + +#define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:"\ + "128k(s-boot)"\ + ",896k(bootloader)"\ + ",256k(params)"\ + ",2816k(config)"\ + ",8m(csa)"\ + ",7m(kernel)"\ + ",1m(log)"\ + ",12m(modem)"\ + ",60m(qboot)"\ + ",-(UBI)\0" + +#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT + +#define MBRPARTS_DEFAULT "20M(permanent)"\ + ",20M(boot)"\ + ",1G(system)"\ + ",100M(swap)"\ + ",-(UMS)\0" + +#define CONFIG_BOOTARGS "Please use defined boot" +#define CONFIG_BOOTCOMMAND "run mmcboot" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" + +#define CONFIG_ENV_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7" +#define CONFIG_BOOTBLOCK "10" +#define CONFIG_UBIBLOCK "9" + +#define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc " +#define CONFIG_ENV_FLASHBOOT CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \ + "${mtdparts}" + +#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}" + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "updateb=" \ + "onenand erase 0x0 0x100000;" \ + "onenand write 0x42008000 0x0 0x100000\0" \ + "updatek=" \ + "onenand erase 0xc00000 0x500000;" \ + "onenand write 0x41008000 0xc00000 0x500000\0" \ + "bootk=" \ + "run loaduimage; bootm 0x40007FC0\0" \ + "updatemmc=" \ + "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \ + "mmc boot 0 1 1 0\0" \ + "updatebackup=" \ + "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \ + "mmc boot 0 1 1 0\0" \ + "updatebootb=" \ + "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \ + "lpj=lpj=3981312\0" \ + "ubifsboot=" \ + "set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \ + CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \ + CONFIG_ENV_COMMON_BOOT "; run bootk\0" \ + "tftpboot=" \ + "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ + CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \ + CONFIG_ENV_COMMON_BOOT \ + "; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \ + "nfsboot=" \ + "set bootargs root=/dev/nfs rw " \ + "nfsroot=${nfsroot},nolock,tcp " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \ + "; run bootk\0" \ + "ramfsboot=" \ + "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \ + "${console} ${meminfo} " \ + "initrd=0x43000000,8M ramdisk=8192\0" \ + "mmcboot=" \ + "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ + "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ + "run loaduimage; bootm 0x40007FC0\0" \ + "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ + "boottrace=setenv opts initcall_debug; run bootcmd\0" \ + "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \ + "verify=n\0" \ + "rootfstype=ext4\0" \ + "console=" CONFIG_DEFAULT_CONSOLE \ + "mtdparts=" MTDPARTS_DEFAULT \ + "mbrparts=" MBRPARTS_DEFAULT \ + "meminfo=crashkernel=32M@0x50000000\0" \ + "nfsroot=/nfsroot/arm\0" \ + "bootblock=" CONFIG_BOOTBLOCK "\0" \ + "ubiblock=" CONFIG_UBIBLOCK" \0" \ + "ubi=enabled\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \ + "mmcdev=0\0" \ + "mmcbootpart=2\0" \ + "mmcrootpart=3\0" \ + "opts=always_resume=1" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "Universal # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) + +#define CONFIG_SYS_HZ 1000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* Stack sizes */ +#define CONFIG_STACKSIZE (256 << 10) /* regular stack 256KB */ + +/* Universal has 2 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */ +#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MB in CS 0 */ +#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */ +#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in CS 0 */ + +#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +#define CONFIG_USE_ONENAND_BOARD_INIT +#define CONFIG_SYS_ONENAND_BASE 0x0C000000 + +#define CONFIG_ENV_IS_IN_MMC 1 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 4096 +#define CONFIG_ENV_OFFSET ((32 - 4) << 10)/* 32KiB - 4KiB */ + +#define CONFIG_DOS_PARTITION 1 + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) + +#endif /* __CONFIG_H */ diff --git a/include/configs/vision2.h b/include/configs/vision2.h index a5c116b..4c8e7fa 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -24,11 +24,12 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/arch/imx-regs.h> #define CONFIG_MX51 /* in a mx51 */ #define CONFIG_L2_OFF +#include <asm/arch/imx-regs.h> + #define CONFIG_SYS_MX5_HCLK 24000000 #define CONFIG_SYS_MX5_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO diff --git a/include/mc13892.h b/include/mc13892.h index 61c3e6e..8138bb7 100644 --- a/include/mc13892.h +++ b/include/mc13892.h @@ -160,4 +160,48 @@ /* Reg Power Control 2*/ #define WDIRESET (1 << 12) +/* SWx Output Volts */ +#define SWX_OUT_MASK 0x1F +#define SWX_OUT_1_25 0x1A +#define SWX_OUT_1_30 0X1C + +/* Buck Switchers (SW1,2,3,4) Output Voltage */ +/* + * NOTE: These values are for SWxHI = 0, + * SWxHI = 1 adds 0.5V to the desired voltage + */ +#define SWx_0_600V 0 +#define SWx_0_625V 1 +#define SWx_0_650V 2 +#define SWx_0_675V 3 +#define SWx_0_700V 4 +#define SWx_0_725V 5 +#define SWx_0_750V 6 +#define SWx_0_775V 7 +#define SWx_0_800V 8 +#define SWx_0_825V 9 +#define SWx_0_850V 10 +#define SWx_0_875V 11 +#define SWx_0_900V 12 +#define SWx_0_925V 13 +#define SWx_0_950V 14 +#define SWx_0_975V 15 +#define SWx_1_000V 16 +#define SWx_1_025V 17 +#define SWx_1_050V 18 +#define SWx_1_075V 19 +#define SWx_1_100V 20 +#define SWx_1_125V 21 +#define SWx_1_150V 22 +#define SWx_1_175V 23 +#define SWx_1_200V 24 +#define SWx_1_225V 25 +#define SWx_1_250V 26 +#define SWx_1_275V 27 +#define SWx_1_300V 28 +#define SWx_1_325V 29 +#define SWx_1_350V 30 +#define SWx_1_375V 31 +#define SWx_VOLT_MASK 0x1F + #endif diff --git a/include/mc9sdz60.h b/include/mc9sdz60.h new file mode 100644 index 0000000..31b894c --- /dev/null +++ b/include/mc9sdz60.h @@ -0,0 +1,84 @@ +/* + * Copyright (C) 2009 Marc Kleine-Budde <mkl@pengutronix.de> + * + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_MC9SDZ60_H +#define __ASM_ARCH_MC9SDZ60_H + +/** + * Register addresses for the MC9SDZ60 + * + * @note: these match those in the kernel drivers/mxc/mcu_pmic/mc9s08dz60.h + * but not include/linux/mfd/mc9s08dz60/pmic.h + * + */ +enum mc9sdz60_reg { + MC9SDZ60_REG_VERSION = 0x00, + /* reserved 0x01 */ + MC9SDZ60_REG_SECS = 0x02, + MC9SDZ60_REG_MINS = 0x03, + MC9SDZ60_REG_HRS = 0x04, + MC9SDZ60_REG_DAY = 0x05, + MC9SDZ60_REG_DATE = 0x06, + MC9SDZ60_REG_MONTH = 0x07, + MC9SDZ60_REG_YEAR = 0x08, + MC9SDZ60_REG_ALARM_SECS = 0x09, + MC9SDZ60_REG_ALARM_MINS = 0x0a, + MC9SDZ60_REG_ALARM_HRS = 0x0b, + /* reserved 0x0c */ + /* reserved 0x0d */ + MC9SDZ60_REG_TS_CONTROL = 0x0e, + MC9SDZ60_REG_X_LOW = 0x0f, + MC9SDZ60_REG_Y_LOW = 0x10, + MC9SDZ60_REG_XY_HIGH = 0x11, + MC9SDZ60_REG_X_LEFT_LOW = 0x12, + MC9SDZ60_REG_X_LEFT_HIGH = 0x13, + MC9SDZ60_REG_X_RIGHT = 0x14, + MC9SDZ60_REG_Y_TOP_LOW = 0x15, + MC9SDZ60_REG_Y_TOP_HIGH = 0x16, + MC9SDZ60_REG_Y_BOTTOM = 0x17, + /* reserved 0x18 */ + /* reserved 0x19 */ + MC9SDZ60_REG_RESET_1 = 0x1a, + MC9SDZ60_REG_RESET_2 = 0x1b, + MC9SDZ60_REG_POWER_CTL = 0x1c, + MC9SDZ60_REG_DELAY_CONFIG = 0x1d, + /* reserved 0x1e */ + /* reserved 0x1f */ + MC9SDZ60_REG_GPIO_1 = 0x20, + MC9SDZ60_REG_GPIO_2 = 0x21, + MC9SDZ60_REG_KPD_1 = 0x22, + MC9SDZ60_REG_KPD_2 = 0x23, + MC9SDZ60_REG_KPD_CONTROL = 0x24, + MC9SDZ60_REG_INT_ENABLE_1 = 0x25, + MC9SDZ60_REG_INT_ENABLE_2 = 0x26, + MC9SDZ60_REG_INT_FLAG_1 = 0x27, + MC9SDZ60_REG_INT_FLAG_2 = 0x28, + MC9SDZ60_REG_DES_FLAG = 0x29, +}; + +extern u8 mc9sdz60_reg_read(enum mc9sdz60_reg reg); +extern void mc9sdz60_reg_write(enum mc9sdz60_reg reg, u8 val); + +#endif /* __ASM_ARCH_MC9SDZ60_H */ diff --git a/include/mmc.h b/include/mmc.h index 74c0b1d..fcd0fd1 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -274,6 +274,9 @@ struct mmc { struct mmc_cmd *cmd, struct mmc_data *data); void (*set_ios)(struct mmc *mmc); int (*init)(struct mmc *mmc); +#ifdef CONFIG_MMC_MBLOCK + uint b_max; +#endif }; int mmc_register(struct mmc *mmc); diff --git a/include/netdev.h b/include/netdev.h index 1a542e8..6f0a971 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -93,6 +93,7 @@ int uli526x_initialize(bd_t *bis); int xilinx_emaclite_initialize (bd_t *bis, int base_addr); int sh_eth_initialize(bd_t *bis); int dm9000_initialize(bd_t *bis); +int fecmxc_initialize(bd_t *bis); /* Boards with PCI network controllers can call this from their board_eth_init() * function to initialize whatever's on board. diff --git a/tools/imximage.c b/tools/imximage.c index 39f89c2..8e81bdb 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -36,9 +36,10 @@ * Supported commands for configuration file */ static table_entry_t imximage_cmds[] = { - {CMD_BOOT_FROM, "BOOT_FROM", "boot command", }, - {CMD_DATA, "DATA", "Reg Write Data", }, - {-1, "", "", }, + {CMD_BOOT_FROM, "BOOT_FROM", "boot command", }, + {CMD_DATA, "DATA", "Reg Write Data", }, + {CMD_IMAGE_VERSION, "IMAGE_VERSION", "image version", }, + {-1, "", "", }, }; /* @@ -53,8 +54,21 @@ static table_entry_t imximage_bootops[] = { {-1, "", "Invalid", }, }; +/* + * IMXIMAGE version definition for i.MX chips + */ +static table_entry_t imximage_versions[] = { + {IMXIMAGE_V1, "", " (i.MX25/35/51 compatible)", }, + {IMXIMAGE_V2, "", " (i.MX53 compatible)", }, + {-1, "", " (Invalid)", }, +}; static struct imx_header imximage_header; +static uint32_t imximage_version; + +static set_dcd_val_t set_dcd_val; +static set_dcd_rst_t set_dcd_rst; +static set_imx_hdr_t set_imx_hdr; static uint32_t get_cfg_value(char *token, char *name, int linenr) { @@ -71,67 +85,353 @@ static uint32_t get_cfg_value(char *token, char *name, int linenr) return value; } -static int imximage_check_image_types(uint8_t type) +static uint32_t detect_imximage_version(struct imx_header *imx_hdr) { - if (type == IH_TYPE_IMXIMAGE) - return EXIT_SUCCESS; - else - return EXIT_FAILURE; + imx_header_v1_t *hdr_v1 = &imx_hdr->header.hdr_v1; + imx_header_v2_t *hdr_v2 = &imx_hdr->header.hdr_v2; + flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr; + flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr; + + /* Try to detect V1 */ + if ((fhdr_v1->app_code_barker == APP_CODE_BARKER) && + (hdr_v1->dcd_table.preamble.barker == DCD_BARKER)) + return IMXIMAGE_V1; + + /* Try to detect V2 */ + if ((fhdr_v2->header.tag == IVT_HEADER_TAG) && + (hdr_v2->dcd_table.header.tag == DCD_HEADER_TAG)) + return IMXIMAGE_V2; + + return IMXIMAGE_VER_INVALID; } -static int imximage_verify_header(unsigned char *ptr, int image_size, - struct mkimage_params *params) +static void err_imximage_version(int version) { + fprintf(stderr, + "Error: Unsupported imximage version:%d\n", version); - struct imx_header *imx_hdr = (struct imx_header *) ptr; - flash_header_t *hdr = &imx_hdr->fhdr; + exit(EXIT_FAILURE); +} - /* Only a few checks can be done: search for magic numbers */ - if (hdr->app_code_barker != APP_CODE_BARKER) - return -FDT_ERR_BADSTRUCTURE; +static void set_dcd_val_v1(struct imx_header *imxhdr, char *name, int lineno, + int fld, uint32_t value, uint32_t off) +{ + dcd_v1_t *dcd_v1 = &imxhdr->header.hdr_v1.dcd_table; + + switch (fld) { + case CFG_REG_SIZE: + /* Byte, halfword, word */ + if ((value != 1) && (value != 2) && (value != 4)) { + fprintf(stderr, "Error: %s[%d] - " + "Invalid register size " "(%d)\n", + name, lineno, value); + exit(EXIT_FAILURE); + } + dcd_v1->addr_data[off].type = value; + break; + case CFG_REG_ADDRESS: + dcd_v1->addr_data[off].addr = value; + break; + case CFG_REG_VALUE: + dcd_v1->addr_data[off].value = value; + break; + default: + break; - if (imx_hdr->dcd_table.preamble.barker != DCD_BARKER) - return -FDT_ERR_BADSTRUCTURE; + } +} - return 0; +static void set_dcd_val_v2(struct imx_header *imxhdr, char *name, int lineno, + int fld, uint32_t value, uint32_t off) +{ + dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table; + + switch (fld) { + case CFG_REG_ADDRESS: + dcd_v2->addr_data[off].addr = cpu_to_be32(value); + break; + case CFG_REG_VALUE: + dcd_v2->addr_data[off].value = cpu_to_be32(value); + break; + default: + break; + + } } -static void imximage_print_header(const void *ptr) +/* + * Complete setting up the rest field of DCD of V1 + * such as barker code and DCD data length. + */ +static void set_dcd_rst_v1(struct imx_header *imxhdr, uint32_t dcd_len, + char *name, int lineno) { - struct imx_header *imx_hdr = (struct imx_header *) ptr; - flash_header_t *hdr = &imx_hdr->fhdr; - uint32_t size; - uint32_t length; - dcd_t *dcd = &imx_hdr->dcd_table; + dcd_v1_t *dcd_v1 = &imxhdr->header.hdr_v1.dcd_table; + + if (dcd_len > MAX_HW_CFG_SIZE_V1) { + fprintf(stderr, "Error: %s[%d] -" + "DCD table exceeds maximum size(%d)\n", + name, lineno, MAX_HW_CFG_SIZE_V1); + exit(EXIT_FAILURE); + } + + dcd_v1->preamble.barker = DCD_BARKER; + dcd_v1->preamble.length = dcd_len * sizeof(dcd_type_addr_data_t); +} + +/* + * Complete setting up the reset field of DCD of V2 + * such as DCD tag, version, length, etc. + */ +static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len, + char *name, int lineno) +{ + dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table; + + if (dcd_len > MAX_HW_CFG_SIZE_V2) { + fprintf(stderr, "Error: %s[%d] -" + "DCD table exceeds maximum size(%d)\n", + name, lineno, MAX_HW_CFG_SIZE_V2); + exit(EXIT_FAILURE); + } + + dcd_v2->header.tag = DCD_HEADER_TAG; + dcd_v2->header.length = cpu_to_be16( + dcd_len * sizeof(dcd_addr_data_t) + 8); + dcd_v2->header.version = DCD_VERSION; + dcd_v2->write_dcd_command.tag = DCD_COMMAND_TAG; + dcd_v2->write_dcd_command.length = cpu_to_be16( + dcd_len * sizeof(dcd_addr_data_t) + 4); + dcd_v2->write_dcd_command.param = DCD_COMMAND_PARAM; +} + +static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, + struct stat *sbuf, + struct mkimage_params *params) +{ + imx_header_v1_t *hdr_v1 = &imxhdr->header.hdr_v1; + flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr; + dcd_v1_t *dcd_v1 = &hdr_v1->dcd_table; + uint32_t base_offset; + + /* Set default offset */ + imxhdr->flash_offset = FLASH_OFFSET_STANDARD; + + /* Set magic number */ + fhdr_v1->app_code_barker = APP_CODE_BARKER; + + fhdr_v1->app_dest_ptr = params->addr; + fhdr_v1->app_dest_ptr = params->ep - imxhdr->flash_offset - + sizeof(struct imx_header); + fhdr_v1->app_code_jump_vector = params->ep; + + base_offset = fhdr_v1->app_dest_ptr + imxhdr->flash_offset ; + fhdr_v1->dcd_ptr_ptr = + (uint32_t) (offsetof(flash_header_v1_t, dcd_ptr) - + offsetof(flash_header_v1_t, app_code_jump_vector) + + base_offset); + + fhdr_v1->dcd_ptr = base_offset + + offsetof(imx_header_v1_t, dcd_table); + + /* The external flash header must be at the end of the DCD table */ + dcd_v1->addr_data[dcd_len].type = sbuf->st_size + + imxhdr->flash_offset + + sizeof(struct imx_header); + + /* Security feature are not supported */ + fhdr_v1->app_code_csf = 0; + fhdr_v1->super_root_key = 0; +} + +static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, + struct stat *sbuf, + struct mkimage_params *params) +{ + imx_header_v2_t *hdr_v2 = &imxhdr->header.hdr_v2; + flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr; + + /* Set default offset */ + imxhdr->flash_offset = FLASH_OFFSET_STANDARD; + + /* Set magic number */ + fhdr_v2->header.tag = IVT_HEADER_TAG; /* 0xD1 */ + fhdr_v2->header.length = cpu_to_be16(sizeof(flash_header_v2_t)); + fhdr_v2->header.version = IVT_VERSION; /* 0x40 */ + + fhdr_v2->entry = params->ep; + fhdr_v2->reserved1 = fhdr_v2->reserved2 = 0; + fhdr_v2->self = params->ep - sizeof(struct imx_header); + + fhdr_v2->dcd_ptr = fhdr_v2->self + + offsetof(imx_header_v2_t, dcd_table); + + fhdr_v2->boot_data_ptr = fhdr_v2->self + + offsetof(imx_header_v2_t, boot_data); + + hdr_v2->boot_data.start = fhdr_v2->self - imxhdr->flash_offset; + hdr_v2->boot_data.size = sbuf->st_size + + imxhdr->flash_offset + + sizeof(struct imx_header); + + /* Security feature are not supported */ + fhdr_v2->csf = 0; +} + +static void set_hdr_func(struct imx_header *imxhdr) +{ + switch (imximage_version) { + case IMXIMAGE_V1: + set_dcd_val = set_dcd_val_v1; + set_dcd_rst = set_dcd_rst_v1; + set_imx_hdr = set_imx_hdr_v1; + break; + case IMXIMAGE_V2: + set_dcd_val = set_dcd_val_v2; + set_dcd_rst = set_dcd_rst_v2; + set_imx_hdr = set_imx_hdr_v2; + break; + default: + err_imximage_version(imximage_version); + break; + } +} - size = imx_hdr->dcd_table.preamble.length; - if (size > (MAX_HW_CFG_SIZE * sizeof(dcd_type_addr_data_t))) { +static void print_hdr_v1(struct imx_header *imx_hdr) +{ + imx_header_v1_t *hdr_v1 = &imx_hdr->header.hdr_v1; + flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr; + dcd_v1_t *dcd_v1 = &hdr_v1->dcd_table; + uint32_t size, length, ver; + + size = dcd_v1->preamble.length; + if (size > (MAX_HW_CFG_SIZE_V1 * sizeof(dcd_type_addr_data_t))) { fprintf(stderr, "Error: Image corrupt DCD size %d exceed maximum %d\n", (uint32_t)(size / sizeof(dcd_type_addr_data_t)), - MAX_HW_CFG_SIZE); + MAX_HW_CFG_SIZE_V1); + exit(EXIT_FAILURE); + } + + length = dcd_v1->preamble.length / sizeof(dcd_type_addr_data_t); + ver = detect_imximage_version(imx_hdr); + + printf("Image Type: Freescale IMX Boot Image\n"); + printf("Image Ver: %x", ver); + printf("%s\n", get_table_entry_name(imximage_versions, NULL, ver)); + printf("Data Size: "); + genimg_print_size(dcd_v1->addr_data[length].type); + printf("Load Address: %08x\n", (uint32_t)fhdr_v1->app_dest_ptr); + printf("Entry Point: %08x\n", (uint32_t)fhdr_v1->app_code_jump_vector); +} + +static void print_hdr_v2(struct imx_header *imx_hdr) +{ + imx_header_v2_t *hdr_v2 = &imx_hdr->header.hdr_v2; + flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr; + dcd_v2_t *dcd_v2 = &hdr_v2->dcd_table; + uint32_t size, version; + + size = be16_to_cpu(dcd_v2->header.length) - 8; + if (size > (MAX_HW_CFG_SIZE_V2 * sizeof(dcd_addr_data_t))) { + fprintf(stderr, + "Error: Image corrupt DCD size %d exceed maximum %d\n", + (uint32_t)(size / sizeof(dcd_addr_data_t)), + MAX_HW_CFG_SIZE_V2); exit(EXIT_FAILURE); } - length = dcd->preamble.length / sizeof(dcd_type_addr_data_t); + version = detect_imximage_version(imx_hdr); printf("Image Type: Freescale IMX Boot Image\n"); + printf("Image Ver: %x", version); + printf("%s\n", get_table_entry_name(imximage_versions, NULL, version)); printf("Data Size: "); - genimg_print_size(dcd->addr_data[length].type); - printf("Load Address: %08x\n", (unsigned int)hdr->app_dest_ptr); - printf("Entry Point: %08x\n", (unsigned int)hdr->app_code_jump_vector); + genimg_print_size(hdr_v2->boot_data.size); + printf("Load Address: %08x\n", (uint32_t)fhdr_v2->boot_data_ptr); + printf("Entry Point: %08x\n", (uint32_t)fhdr_v2->entry); } -static uint32_t imximage_parse_cfg_file(struct imx_header *imxhdr, char *name) +static void parse_cfg_cmd(struct imx_header *imxhdr, int32_t cmd, char *token, + char *name, int lineno, int fld, int dcd_len) +{ + int value; + static int cmd_ver_first = ~0; + + switch (cmd) { + case CMD_IMAGE_VERSION: + imximage_version = get_cfg_value(token, name, lineno); + if (cmd_ver_first == 0) { + fprintf(stderr, "Error: %s[%d] - IMAGE_VERSION " + "command need be the first before other " + "valid command in the file\n", name, lineno); + exit(EXIT_FAILURE); + } + cmd_ver_first = 1; + set_hdr_func(imxhdr); + break; + case CMD_BOOT_FROM: + imxhdr->flash_offset = get_table_entry_id(imximage_bootops, + "imximage boot option", token); + if (imxhdr->flash_offset == -1) { + fprintf(stderr, "Error: %s[%d] -Invalid boot device" + "(%s)\n", name, lineno, token); + exit(EXIT_FAILURE); + } + if (unlikely(cmd_ver_first != 1)) + cmd_ver_first = 0; + break; + case CMD_DATA: + value = get_cfg_value(token, name, lineno); + (*set_dcd_val)(imxhdr, name, lineno, fld, value, dcd_len); + if (unlikely(cmd_ver_first != 1)) + cmd_ver_first = 0; + break; + } +} + +static void parse_cfg_fld(struct imx_header *imxhdr, int32_t *cmd, + char *token, char *name, int lineno, int fld, int *dcd_len) +{ + int value; + + switch (fld) { + case CFG_COMMAND: + *cmd = get_table_entry_id(imximage_cmds, + "imximage commands", token); + if (*cmd < 0) { + fprintf(stderr, "Error: %s[%d] - Invalid command" + "(%s)\n", name, lineno, token); + exit(EXIT_FAILURE); + } + break; + case CFG_REG_SIZE: + parse_cfg_cmd(imxhdr, *cmd, token, name, lineno, fld, *dcd_len); + break; + case CFG_REG_ADDRESS: + case CFG_REG_VALUE: + if (*cmd != CMD_DATA) + return; + + value = get_cfg_value(token, name, lineno); + (*set_dcd_val)(imxhdr, name, lineno, fld, value, *dcd_len); + + if (fld == CFG_REG_VALUE) + (*dcd_len)++; + break; + default: + break; + } +} +static uint32_t parse_cfg_file(struct imx_header *imxhdr, char *name) { FILE *fd = NULL; char *line = NULL; char *token, *saveptr1, *saveptr2; int lineno = 0; - int fld, value; + int fld; size_t len; int dcd_len = 0; - dcd_t *dcd = &imxhdr->dcd_table; int32_t cmd; fd = fopen(name, "r"); @@ -161,126 +461,75 @@ static uint32_t imximage_parse_cfg_file(struct imx_header *imxhdr, char *name) if (token[0] == '#') break; - /* parse all fields in a single line */ - switch (fld) { - case CFG_COMMAND: - cmd = get_table_entry_id(imximage_cmds, - "imximage commands", token); - if (cmd < 0) { - fprintf(stderr, - "Error: %s[%d] - " - "Invalid command (%s)\n", - name, lineno, token); - exit(EXIT_FAILURE); - } - break; - case CFG_REG_SIZE: - switch (cmd) { - case CMD_BOOT_FROM: - /* Get flash header offset */ - imxhdr->flash_offset = - get_table_entry_id( - imximage_bootops, - "imximage boot option", - token); - if (imxhdr->flash_offset == -1) { - fprintf(stderr, - "Error: %s[%d] -" - "Invalid boot device" - "(%s)\n", - name, lineno, token); - exit(EXIT_FAILURE); - } - break; - case CMD_DATA: - value = get_cfg_value(token, - name, lineno); - - /* Byte, halfword, word */ - if ((value != 1) && - (value != 2) && (value != 4)) { - fprintf(stderr, - "Error: %s[%d] - " - "Invalid register size " - "(%d)\n", - name, lineno, value); - exit(EXIT_FAILURE); - } - dcd->addr_data[dcd_len].type = value; - break; - } - - case CFG_REG_ADDRESS: - if (cmd == CMD_DATA) - dcd->addr_data[dcd_len].addr = - get_cfg_value(token, - name, lineno); - break; - case CFG_REG_VALUE: - if (cmd == CMD_DATA) { - dcd->addr_data[dcd_len].value = - get_cfg_value(token, - name, lineno); - dcd_len++; - } - break; - } + parse_cfg_fld(imxhdr, &cmd, token, name, + lineno, fld, &dcd_len); } - if (dcd_len > MAX_HW_CFG_SIZE) { - fprintf(stderr, - "Error: %s[%d] -" - "DCD table exceeds maximum size(%d)\n", - name, lineno, MAX_HW_CFG_SIZE); - } } - dcd->preamble.barker = DCD_BARKER; - dcd->preamble.length = dcd_len * sizeof(dcd_type_addr_data_t); + + (*set_dcd_rst)(imxhdr, dcd_len, name, lineno); fclose(fd); return dcd_len; } -static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd, - struct mkimage_params *params) -{ - struct imx_header *hdr = (struct imx_header *)ptr; - flash_header_t *fhdr = &hdr->fhdr; - int dcd_len; - dcd_t *dcd = &hdr->dcd_table; - uint32_t base_offset; - /* Set default offset */ - hdr->flash_offset = FLASH_OFFSET_STANDARD; +static int imximage_check_image_types(uint8_t type) +{ + if (type == IH_TYPE_IMXIMAGE) + return EXIT_SUCCESS; + else + return EXIT_FAILURE; +} - /* Set magic number */ - fhdr->app_code_barker = APP_CODE_BARKER; +static int imximage_verify_header(unsigned char *ptr, int image_size, + struct mkimage_params *params) +{ + struct imx_header *imx_hdr = (struct imx_header *) ptr; - /* Parse dcd configuration file */ - dcd_len = imximage_parse_cfg_file(hdr, params->imagename); + if (detect_imximage_version(imx_hdr) == IMXIMAGE_VER_INVALID) + return -FDT_ERR_BADSTRUCTURE; - fhdr->app_dest_ptr = params->addr; - fhdr->app_dest_ptr = params->ep - hdr->flash_offset - - sizeof(struct imx_header); - fhdr->app_code_jump_vector = params->ep; + return 0; +} - base_offset = fhdr->app_dest_ptr + hdr->flash_offset ; - fhdr->dcd_ptr_ptr = (uint32_t) (offsetof(flash_header_t, dcd_ptr) - - offsetof(flash_header_t, app_code_jump_vector) + - base_offset); +static void imximage_print_header(const void *ptr) +{ + struct imx_header *imx_hdr = (struct imx_header *) ptr; + uint32_t version = detect_imximage_version(imx_hdr); + + switch (version) { + case IMXIMAGE_V1: + print_hdr_v1(imx_hdr); + break; + case IMXIMAGE_V2: + print_hdr_v2(imx_hdr); + break; + default: + err_imximage_version(version); + break; + } +} - fhdr->dcd_ptr = base_offset + - offsetof(struct imx_header, dcd_table); +static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd, + struct mkimage_params *params) +{ + struct imx_header *imxhdr = (struct imx_header *)ptr; + uint32_t dcd_len; - /* The external flash header must be at the end of the DCD table */ - dcd->addr_data[dcd_len].type = sbuf->st_size + - hdr->flash_offset + - sizeof(struct imx_header); + /* + * In order to not change the old imx cfg file + * by adding VERSION command into it, here need + * set up function ptr group to V1 by default. + */ + imximage_version = IMXIMAGE_V1; + set_hdr_func(imxhdr); - /* Security feature are not supported */ - fhdr->app_code_csf = 0; - fhdr->super_root_key = 0; + /* Parse dcd configuration file */ + dcd_len = parse_cfg_file(imxhdr, params->imagename); + /* Set the imx header */ + (*set_imx_hdr)(imxhdr, dcd_len, sbuf, params); } int imximage_check_params(struct mkimage_params *params) @@ -309,7 +558,7 @@ int imximage_check_params(struct mkimage_params *params) * imximage parameters */ static struct image_type_params imximage_params = { - .name = "Freescale i.MX 51 Boot Image support", + .name = "Freescale i.MX 5x Boot Image support", .header_size = sizeof(struct imx_header), .hdr = (void *)&imximage_header, .check_image_type = imximage_check_image_types, diff --git a/tools/imximage.h b/tools/imximage.h index b4d926d..38ca6be 100644 --- a/tools/imximage.h +++ b/tools/imximage.h @@ -24,12 +24,14 @@ #ifndef _IMXIMAGE_H_ #define _IMXIMAGE_H_ -#define MAX_HW_CFG_SIZE 60 /* Max number of registers imx can set */ -#define MAX_EXP_SIZE 4 +#include <config.h> + +#define MAX_HW_CFG_SIZE_V2 121 /* Max number of registers imx can set for v2 */ +#define MAX_HW_CFG_SIZE_V1 60 /* Max number of registers imx can set for v1 */ #define APP_CODE_BARKER 0xB1 #define DCD_BARKER 0xB17219E9 -#define HEADER_OFFSET 0x400 +#define HEADER_OFFSET 0x400 #define CMD_DATA_STR "DATA" #define FLASH_OFFSET_STANDARD 0x400 @@ -38,8 +40,16 @@ #define FLASH_OFFSET_SPI FLASH_OFFSET_STANDARD #define FLASH_OFFSET_ONENAND 0x100 +#define IVT_HEADER_TAG 0xD1 +#define IVT_VERSION 0x40 +#define DCD_HEADER_TAG 0xD2 +#define DCD_COMMAND_TAG 0xCC +#define DCD_VERSION 0x40 +#define DCD_COMMAND_PARAM 0x4 + enum imximage_cmd { CMD_INVALID, + CMD_IMAGE_VERSION, CMD_BOOT_FROM, CMD_DATA }; @@ -52,13 +62,11 @@ enum imximage_fld_types { CFG_REG_VALUE }; -typedef struct { - uint8_t rsa_exponent[MAX_EXP_SIZE]; /* RSA public exponent */ - uint8_t *rsa_modulus; /* RSA modulus pointer */ - uint16_t exponent_size; /* Exponent size (bytes) */ - uint16_t modulus_size; /* Modulus size (bytes) */ - uint8_t init_flag; /* key initialized */ -} hab_rsa_public_key; +enum imximage_version { + IMXIMAGE_VER_INVALID = -1, + IMXIMAGE_V1 = 1, + IMXIMAGE_V2 +}; typedef struct { uint32_t type; /* Type of pointer (byte, halfword, word, wait/read) */ @@ -73,8 +81,8 @@ typedef struct { typedef struct { dcd_preamble_t preamble; - dcd_type_addr_data_t addr_data[MAX_HW_CFG_SIZE]; -} dcd_t; + dcd_type_addr_data_t addr_data[MAX_HW_CFG_SIZE_V1]; +} dcd_v1_t; typedef struct { uint32_t app_code_jump_vector; @@ -84,22 +92,84 @@ typedef struct { uint32_t super_root_key; uint32_t dcd_ptr; uint32_t app_dest_ptr; -} flash_header_t; +} flash_header_v1_t; typedef struct { uint32_t length; /* Length of data to be read from flash */ } flash_cfg_parms_t; -struct imx_header { - flash_header_t fhdr; - dcd_t dcd_table; +typedef struct { + flash_header_v1_t fhdr; + dcd_v1_t dcd_table; flash_cfg_parms_t ext_header; +} imx_header_v1_t; + +typedef struct { + uint32_t addr; + uint32_t value; +} dcd_addr_data_t; + +typedef struct { + uint8_t tag; + uint16_t length; + uint8_t version; +} __attribute__((packed)) ivt_header_t; + +typedef struct { + uint8_t tag; + uint16_t length; + uint8_t param; +} __attribute__((packed)) write_dcd_command_t; + +typedef struct { + ivt_header_t header; + write_dcd_command_t write_dcd_command; + dcd_addr_data_t addr_data[MAX_HW_CFG_SIZE_V2]; +} dcd_v2_t; + +typedef struct { + uint32_t start; + uint32_t size; + uint32_t plugin; +} boot_data_t; + +typedef struct { + ivt_header_t header; + uint32_t entry; + uint32_t reserved1; + uint32_t dcd_ptr; + uint32_t boot_data_ptr; + uint32_t self; + uint32_t csf; + uint32_t reserved2; +} flash_header_v2_t; + +typedef struct { + flash_header_v2_t fhdr; + boot_data_t boot_data; + dcd_v2_t dcd_table; +} imx_header_v2_t; + +struct imx_header { + union { + imx_header_v1_t hdr_v1; + imx_header_v2_t hdr_v2; + } header; uint32_t flash_offset; }; -struct reg_config { - uint32_t raddr; - uint32_t rdata; -}; +typedef void (*set_dcd_val_t)(struct imx_header *imxhdr, + char *name, int lineno, + int fld, uint32_t value, + uint32_t off); + +typedef void (*set_dcd_rst_t)(struct imx_header *imxhdr, + uint32_t dcd_len, + char *name, int lineno); + +typedef void (*set_imx_hdr_t)(struct imx_header *imxhdr, + uint32_t dcd_len, + struct stat *sbuf, + struct mkimage_params *params); #endif /* _IMXIMAGE_H_ */ |