summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--common/miiphyutil.c12
-rw-r--r--drivers/net/fec_mxc.c73
-rw-r--r--drivers/net/kirkwood_egiga.c13
3 files changed, 45 insertions, 53 deletions
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index 196ef4a..856fbc7 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -293,7 +293,7 @@ int miiphy_info (char *devname, unsigned char addr, unsigned int *oui,
int miiphy_reset (char *devname, unsigned char addr)
{
unsigned short reg;
- int loop_cnt;
+ int timeout = 500;
if (miiphy_read (devname, addr, PHY_BMCR, &reg) != 0) {
debug ("PHY status read failed\n");
@@ -311,13 +311,13 @@ int miiphy_reset (char *devname, unsigned char addr)
* auto-clearing). This should happen within 0.5 seconds per the
* IEEE spec.
*/
- loop_cnt = 0;
reg = 0x8000;
- while (((reg & 0x8000) != 0) && (loop_cnt++ < 1000000)) {
- if (miiphy_read (devname, addr, PHY_BMCR, &reg) != 0) {
- debug ("PHY status read failed\n");
- return (-1);
+ while (((reg & 0x8000) != 0) && timeout--) {
+ if (miiphy_read(devname, addr, PHY_BMCR, &reg) != 0) {
+ debug("PHY status read failed\n");
+ return -1;
}
+ udelay(1000);
}
if ((reg & 0x8000) == 0) {
return (0);
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 19116f2..446076f 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -108,6 +108,17 @@ static int fec_miiphy_read(char *dev, uint8_t phyAddr, uint8_t regAddr,
return 0;
}
+static void fec_mii_setspeed(struct fec_priv *fec)
+{
+ /*
+ * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
+ * and do not drop the Preamble.
+ */
+ writel((((imx_get_fecclk() / 1000000) + 2) / 5) << 1,
+ &fec->eth->mii_speed);
+ debug("fec_init: mii_speed %#lx\n",
+ fec->eth->mii_speed);
+}
static int fec_miiphy_write(char *dev, uint8_t phyAddr, uint8_t regAddr,
uint16_t data)
{
@@ -236,7 +247,7 @@ static int fec_rbd_init(struct fec_priv *fec, int count, int size)
fec->rdb_ptr = malloc(size * count + DB_DATA_ALIGNMENT);
p = (uint32_t)fec->rdb_ptr;
if (!p) {
- puts("fec_imx27: not enough malloc memory!\n");
+ puts("fec_mxc: not enough malloc memory\n");
return -ENOMEM;
}
memset((void *)p, 0, size * count + DB_DATA_ALIGNMENT);
@@ -299,6 +310,13 @@ static void fec_rbd_clean(int last, struct fec_bd *pRbd)
static int fec_get_hwaddr(struct eth_device *dev, unsigned char *mac)
{
+/*
+ * The MX27 can store the mac address in internal eeprom
+ * This mechanism is not supported now by MX51
+ */
+#ifdef CONFIG_MX51
+ return -1;
+#else
struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
int i;
@@ -306,10 +324,12 @@ static int fec_get_hwaddr(struct eth_device *dev, unsigned char *mac)
mac[6-1-i] = readl(&iim->iim_bank_area0[IIM0_MAC + i]);
return is_valid_ether_addr(mac);
+#endif
}
-static int fec_set_hwaddr(struct eth_device *dev, unsigned char *mac)
+static int fec_set_hwaddr(struct eth_device *dev)
{
+ uchar *mac = dev->enetaddr;
struct fec_priv *fec = (struct fec_priv *)dev->priv;
writel(0, &fec->eth->iaddr1);
@@ -373,7 +393,7 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
sizeof(struct fec_bd) + DB_ALIGNMENT);
base = (uint32_t)fec->base_ptr;
if (!base) {
- puts("fec_imx27: not enough malloc memory!\n");
+ puts("fec_mxc: not enough malloc memory\n");
return -ENOMEM;
}
memset((void *)base, 0, (2 + FEC_RBD_NUM) *
@@ -411,14 +431,8 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
* Frame length=1518; MII mode;
*/
writel(0x05ee0024, &fec->eth->r_cntrl); /* FIXME 0x05ee0004 */
- /*
- * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
- * and do not drop the Preamble.
- */
- writel((((imx_get_ahbclk() / 1000000) + 2) / 5) << 1,
- &fec->eth->mii_speed);
- debug("fec_init: mii_speed %#lx\n",
- (((imx_get_ahbclk() / 1000000) + 2) / 5) << 1);
+
+ fec_mii_setspeed(fec);
}
/*
* Set Opcode/Pause Duration Register
@@ -460,6 +474,7 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
miiphy_restart_aneg(dev);
fec_open(dev);
+ fec_set_hwaddr(dev);
return 0;
}
@@ -522,7 +537,7 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length)
* Check for valid length of data.
*/
if ((length > 1500) || (length <= 0)) {
- printf("Payload (%d) to large!\n", length);
+ printf("Payload (%d) too large\n", length);
return -1;
}
@@ -651,22 +666,14 @@ static int fec_recv(struct eth_device *dev)
static int fec_probe(bd_t *bd)
{
- struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
struct eth_device *edev;
struct fec_priv *fec = &gfec;
- unsigned char ethaddr_str[20];
unsigned char ethaddr[6];
- char *tmp = getenv("ethaddr");
- char *end;
-
- /* enable FEC clock */
- writel(readl(&pll->pccr1) | PCCR1_HCLK_FEC, &pll->pccr1);
- writel(readl(&pll->pccr0) | PCCR0_FEC_EN, &pll->pccr0);
/* create and fill edev struct */
edev = (struct eth_device *)malloc(sizeof(struct eth_device));
if (!edev) {
- puts("fec_imx27: not enough malloc memory!\n");
+ puts("fec_mxc: not enough malloc memory\n");
return -ENOMEM;
}
edev->priv = fec;
@@ -702,14 +709,7 @@ static int fec_probe(bd_t *bd)
* Frame length=1518; MII mode;
*/
writel(0x05ee0024, &fec->eth->r_cntrl); /* FIXME 0x05ee0004 */
- /*
- * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
- * and do not drop the Preamble.
- */
- writel((((imx_get_ahbclk() / 1000000) + 2) / 5) << 1,
- &fec->eth->mii_speed);
- debug("fec_init: mii_speed %#lx\n",
- (((imx_get_ahbclk() / 1000000) + 2) / 5) << 1);
+ fec_mii_setspeed(fec);
sprintf(edev->name, "FEC_MXC");
@@ -717,20 +717,11 @@ static int fec_probe(bd_t *bd)
eth_register(edev);
- if ((NULL != tmp) && (12 <= strlen(tmp))) {
- int i;
- /* convert MAC from string to int */
- for (i = 0; i < 6; i++) {
- ethaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end + 1 : end;
- }
- } else if (fec_get_hwaddr(edev, ethaddr) == 0) {
+ if (fec_get_hwaddr(edev, ethaddr) == 0) {
printf("got MAC address from EEPROM: %pM\n", ethaddr);
- setenv("ethaddr", (char *)ethaddr_str);
+ memcpy(edev->enetaddr, ethaddr, 6);
+ fec_set_hwaddr(edev);
}
- memcpy(edev->enetaddr, ethaddr, 6);
- fec_set_hwaddr(edev, ethaddr);
return 0;
}
diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c
index 07a86cd..2ad7fea 100644
--- a/drivers/net/kirkwood_egiga.c
+++ b/drivers/net/kirkwood_egiga.c
@@ -39,6 +39,7 @@
#include "kirkwood_egiga.h"
#define KIRKWOOD_PHY_ADR_REQUEST 0xee
+#define KWGBE_SMI_REG (((struct kwgbe_registers *)KW_EGIGA0_BASE)->smi)
/*
* smi_reg_read - miiphy_read callback function.
@@ -76,7 +77,7 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data)
/* wait till the SMI is not busy */
do {
/* read smi register */
- smi_reg = KWGBEREG_RD(regs->smi);
+ smi_reg = KWGBEREG_RD(KWGBE_SMI_REG);
if (timeout-- == 0) {
printf("Err..(%s) SMI busy timeout\n", __FUNCTION__);
return -EFAULT;
@@ -89,14 +90,14 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data)
| KWGBE_PHY_SMI_OPCODE_READ;
/* write the smi register */
- KWGBEREG_WR(regs->smi, smi_reg);
+ KWGBEREG_WR(KWGBE_SMI_REG, smi_reg);
/*wait till read value is ready */
timeout = KWGBE_PHY_SMI_TIMEOUT;
do {
/* read smi register */
- smi_reg = KWGBEREG_RD(regs->smi);
+ smi_reg = KWGBEREG_RD(KWGBE_SMI_REG);
if (timeout-- == 0) {
printf("Err..(%s) SMI read ready timeout\n",
__FUNCTION__);
@@ -107,7 +108,7 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data)
/* Wait for the data to update in the SMI register */
for (timeout = 0; timeout < KWGBE_PHY_SMI_TIMEOUT; timeout++) ;
- *data = (u16) (KWGBEREG_RD(regs->smi) & KWGBE_PHY_SMI_DATA_MASK);
+ *data = (u16) (KWGBEREG_RD(KWGBE_SMI_REG) & KWGBE_PHY_SMI_DATA_MASK);
debug("%s:(adr %d, off %d) value= %04x\n", __FUNCTION__, phy_adr,
reg_ofs, *data);
@@ -150,7 +151,7 @@ static int smi_reg_write(char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
timeout = KWGBE_PHY_SMI_TIMEOUT;
do {
/* read smi register */
- smi_reg = KWGBEREG_RD(regs->smi);
+ smi_reg = KWGBEREG_RD(KWGBE_SMI_REG);
if (timeout-- == 0) {
printf("Err..(%s) SMI busy timeout\n", __FUNCTION__);
return -ETIME;
@@ -164,7 +165,7 @@ static int smi_reg_write(char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
smi_reg &= ~KWGBE_PHY_SMI_OPCODE_READ;
/* write the smi register */
- KWGBEREG_WR(regs->smi, smi_reg);
+ KWGBEREG_WR(KWGBE_SMI_REG, smi_reg);
return 0;
}
generated by cgit v1.1 at 2024-12-30 00:52:10 +0000