diff options
78 files changed, 4139 insertions, 65 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 57a79b4..b5f3458 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -753,12 +753,15 @@ Yusuke Goda <goda.yusuke@renesas.com> MIGO-R SH7722 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + <iwamatsu.nobuhiro@renesas.com> MS7750SE SH7750 MS7722SE SH7722 R7780MP SH7780 R2DPlus SH7751R SH7763RDP SH7763 + RSK7203 SH7203 + AP325RXA SH7723 Mark Jonas <mark.jonas@de.bosch.com> @@ -767,6 +770,11 @@ Mark Jonas <mark.jonas@de.bosch.com> Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> MS7720SE SH7720 + R0P77850011RL SH7785 + +Yusuke Goda <goda.yusuke@renesas.com> + + MIGO-R SH7722 ######################################################################### # Blackfin Systems: # @@ -740,6 +740,9 @@ LIST_blackfin=" \ ## SH Systems ######################################################################### +LIST_sh2=" \ + rsk7203 \ +" LIST_sh3=" \ mpr2 \ ms7720se \ @@ -752,9 +755,12 @@ LIST_sh4=" \ r7780mp \ r2dplus \ sh7763rdp \ + sh7785lcr \ + ap325rxa \ " LIST_sh=" \ + ${LIST_sh2} \ ${LIST_sh3} \ ${LIST_sh4} \ " @@ -799,7 +805,7 @@ do |mips|mips_el \ |nios|nios2 \ |ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx|TSEC \ - |sh|sh3|sh4 \ + |sh|sh2|sh3|sh4 \ |sparc \ |x86|I486 \ ) @@ -3006,6 +3006,14 @@ mimc200_config : unconfig #======================================================================== ######################################################################### +## sh2 (Renesas SuperH) +######################################################################### +rsk7203_config: unconfig + @ >include/config.h + @echo "#define CONFIG_RSK7203 1" >> include/config.h + @./mkconfig -a $(@:_config=) sh sh2 rsk7203 + +######################################################################### ## sh3 (Renesas SuperH) ######################################################################### @@ -3041,17 +3049,27 @@ ms7722se_config : unconfig r2dplus_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 r2dplus + @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus r7780mp_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 r7780mp + @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp sh7763rdp_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 sh7763rdp + @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp + +sh7785lcr_config : unconfig + @ >include/config.h + @echo "#define CONFIG_SH7785LCR 1" >> include/config.h + @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr + +ap325rxa_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h + @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa #======================================================================== # SPARC diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c index ba3d7d2..deaa292 100644 --- a/board/ads5121/ads5121.c +++ b/board/ads5121/ads5121.c @@ -25,6 +25,7 @@ #include <mpc512x.h> #include <asm/bitops.h> #include <command.h> +#include <asm/processor.h> #include <fdt_support.h> #ifdef CONFIG_MISC_INIT_R #include <i2c.h> @@ -92,6 +93,9 @@ int board_early_init_f (void) * Configure Flash Speed */ *((volatile u32 *)(CFG_IMMR + LPC_OFFSET + CS0_CONFIG)) = CFG_CS0_CFG; + if (SVR_MJREV (im->sysconf.spridr) >= 2) { + *((volatile u32 *)(CFG_IMMR + LPC_OFFSET + CS_ALE_TIMING_CONFIG)) = CFG_CS_ALETIMING; + } /* * Enable clocks */ diff --git a/board/ap325rxa/Makefile b/board/ap325rxa/Makefile new file mode 100644 index 0000000..21f3e6e --- /dev/null +++ b/board/ap325rxa/Makefile @@ -0,0 +1,51 @@ +######################################################################### +# +# Copyright (C) 2008 Renesas Solutions Corp. +# Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +# +# board/ap325rxa/Makefile +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := ap325rxa.o cpld-ap325rxa.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ap325rxa/ap325rxa.c b/board/ap325rxa/ap325rxa.c new file mode 100644 index 0000000..cfa0261 --- /dev/null +++ b/board/ap325rxa/ap325rxa.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> + +/* PRI control register */ +#define PRPRICR5 0xFF800048 /* LMB */ +#define PRPRICR5_D 0x2a + +/* FPGA control */ +#define FPGA_NAND_CTL 0xB410020C +#define FPGA_NAND_RST 0x0008 +#define FPGA_NAND_INIT 0x0000 +#define FPGA_NAND_RST_WAIT 10000 + +/* I/O port data */ +#define PACR_D 0x0000 +#define PBCR_D 0x0000 +#define PCCR_D 0x1000 +#define PDCR_D 0x0000 +#define PECR_D 0x0410 +#define PFCR_D 0xffff +#define PGCR_D 0x0000 +#define PHCR_D 0x5011 +#define PJCR_D 0x4400 +#define PKCR_D 0x7c00 +#define PLCR_D 0x0000 +#define PMCR_D 0x0000 +#define PNCR_D 0x0000 +#define PQCR_D 0x0000 +#define PRCR_D 0x0000 +#define PSCR_D 0x0000 +#define PTCR_D 0x0010 +#define PUCR_D 0x0fff +#define PVCR_D 0xffff +#define PWCR_D 0x0000 +#define PXCR_D 0x7500 +#define PYCR_D 0x0000 +#define PZCR_D 0x5540 + +/* Pin Function Controler data */ +#define PSELA_D 0x1410 +#define PSELB_D 0x0140 +#define PSELC_D 0x0000 +#define PSELD_D 0x0400 + +/* I/O Buffer Hi-Z data */ +#define HIZCRA_D 0x0000 +#define HIZCRB_D 0x1000 +#define HIZCRC_D 0x0000 +#define HIZCRD_D 0x0000 + +/* Module select reg data */ +#define MSELCRA_D 0x0014 +#define MSELCRB_D 0x0018 + +/* Module Stop reg Data */ +#define MSTPCR2_D 0xFFD9F280 + +/* CPLD loader */ +extern void init_cpld(void); + +int checkboard(void) +{ + puts("BOARD: AP325RXA\n"); + return 0; +} + +int board_init(void) +{ + /* Pin Function Controler Init */ + outw(PSELA_D, PSELA); + outw(PSELB_D, PSELB); + outw(PSELC_D, PSELC); + outw(PSELD_D, PSELD); + + /* I/O Buffer Hi-Z Init */ + outw(HIZCRA_D, HIZCRA); + outw(HIZCRB_D, HIZCRB); + outw(HIZCRC_D, HIZCRC); + outw(HIZCRD_D, HIZCRD); + + /* Module select reg Init */ + outw(MSELCRA_D, MSELCRA); + outw(MSELCRB_D, MSELCRB); + + /* Module Stop reg Init */ + outl(MSTPCR2_D, MSTPCR2); + + /* I/O ports */ + outw(PACR_D, PACR); + outw(PBCR_D, PBCR); + outw(PCCR_D, PCCR); + outw(PDCR_D, PDCR); + outw(PECR_D, PECR); + outw(PFCR_D, PFCR); + outw(PGCR_D, PGCR); + outw(PHCR_D, PHCR); + outw(PJCR_D, PJCR); + outw(PKCR_D, PKCR); + outw(PLCR_D, PLCR); + outw(PMCR_D, PMCR); + outw(PNCR_D, PNCR); + outw(PQCR_D, PQCR); + outw(PRCR_D, PRCR); + outw(PSCR_D, PSCR); + outw(PTCR_D, PTCR); + outw(PUCR_D, PUCR); + outw(PVCR_D, PVCR); + outw(PWCR_D, PWCR); + outw(PXCR_D, PXCR); + outw(PYCR_D, PYCR); + outw(PZCR_D, PZCR); + + /* PRI control register Init */ + outl(PRPRICR5_D, PRPRICR5); + + /* cpld init */ + init_cpld(); + + return 0; +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +void led_set_state(unsigned short value) +{ +} + +void ide_set_reset(int idereset) +{ + outw(FPGA_NAND_RST, FPGA_NAND_CTL); /* NAND RESET */ + udelay(FPGA_NAND_RST_WAIT); + outw(FPGA_NAND_INIT, FPGA_NAND_CTL); +} diff --git a/board/ap325rxa/config.mk b/board/ap325rxa/config.mk new file mode 100644 index 0000000..b52a5e5 --- /dev/null +++ b/board/ap325rxa/config.mk @@ -0,0 +1,26 @@ +# +# Copyright (C) 2007 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# + +TEXT_BASE = 0x8FFC0000 diff --git a/board/ap325rxa/cpld-ap325rxa.c b/board/ap325rxa/cpld-ap325rxa.c new file mode 100644 index 0000000..16fadcb --- /dev/null +++ b/board/ap325rxa/cpld-ap325rxa.c @@ -0,0 +1,206 @@ +/*************************************************************** + * Project: + * CPLD SlaveSerial Configuration via embedded microprocessor. + * + * Copyright info: + * + * This is free software; you can redistribute it and/or modify + * it as you like. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Description: + * + * This is the main source file that will allow a microprocessor + * to configure Xilinx Virtex, Virtex-E, Virtex-EM, Virtex-II, + * and Spartan-II devices via the SlaveSerial Configuration Mode. + * This code is discussed in Xilinx Application Note, XAPP502. + * + * History: + * 3-October-2001 MN/MP - Created + * 20-August-2008 Renesas Solutions - Modified to SH7723 + ****************************************************************/ + +#include <common.h> + +/* Serial */ +#define SCIF_BASE 0xffe00000 /* SCIF0 */ +#define SCSMR (vu_short *)(SCIF_BASE + 0x00) +#define SCBRR (vu_char *)(SCIF_BASE + 0x04) +#define SCSCR (vu_short *)(SCIF_BASE + 0x08) +#define SC_TDR (vu_char *)(SCIF_BASE + 0x0C) +#define SC_SR (vu_short *)(SCIF_BASE + 0x10) +#define SCFCR (vu_short *)(SCIF_BASE + 0x18) +#define RFCR (vu_long *)0xFE400020 + +#define SCSCR_INIT 0x0038 +#define SCSCR_CLR 0x0000 +#define SCFCR_INIT 0x0006 +#define SCSMR_INIT 0x0080 +#define RFCR_CLR 0xA400 +#define SCI_TD_E 0x0020 +#define SCI_TDRE_CLEAR 0x00df + +#define BPS_SETTING_VALUE 1 /* 12.5MHz */ +#define WAIT_RFCR_COUNTER 500 + +/* CPLD data size */ +#define CPLD_DATA_SIZE 169216 + +/* out */ +#define CPLD_PFC_ADR ((vu_short *)0xA4050112) + +#define CPLD_PROG_ADR ((vu_char *)0xA4050132) +#define CPLD_PROG_DAT 0x80 + +/* in */ +#define CPLD_INIT_ADR ((vu_char *)0xA4050132) +#define CPLD_INIT_DAT 0x40 +#define CPLD_DONE_ADR ((vu_char *)0xA4050132) +#define CPLD_DONE_DAT 0x20 + +#define HIZCRB ((vu_short *)0xA405015A) + +/* data */ +#define CPLD_NOMAL_START 0xA0A80000 +#define CPLD_SAFE_START 0xA0AC0000 +#define MODE_SW (vu_char *)0xA405012A + +static void init_cpld_loader(void) +{ + + *SCSCR = SCSCR_CLR; + *SCFCR = SCFCR_INIT; + *SCSMR = SCSMR_INIT; + + *SCBRR = BPS_SETTING_VALUE; + + *RFCR = RFCR_CLR; /* Refresh counter clear */ + + while (*RFCR < WAIT_RFCR_COUNTER) + ; + + *SCFCR = 0x0; /* RTRG=00, TTRG=00 */ + /* MCE=0,TFRST=0,RFRST=0,LOOP=0 */ + *SCSCR = SCSCR_INIT; +} + +static int check_write_ready(void) +{ + u16 status = *SC_SR; + return status & SCI_TD_E; +} + +static void write_cpld_data(char ch) +{ + while (!check_write_ready()) + ; + + *SC_TDR = ch; + *SC_SR; + *SC_SR = SCI_TDRE_CLEAR; +} + +static int delay(void) +{ + int i; + int c = 0; + for (i = 0; i < 200; i++) { + c = *(volatile int *)0xa0000000; + } + return c; +} + +/*********************************************************************** + * + * Function: slave_serial + * + * Description: Initiates SlaveSerial Configuration. + * Calls ShiftDataOut() to output serial data + * + ***********************************************************************/ +static void slave_serial(void) +{ + int i; + unsigned char *flash; + + *CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */ + delay(); + + /* + * Toggle Program Pin by Toggling Program_OE bit + * This is accomplished by writing to the Program Register in the CPLD + * + * NOTE: The Program_OE bit should be driven high to bring the Virtex + * Program Pin low. Likewise, it should be driven low + * to bring the Virtex Program Pin to High-Z + */ + + *CPLD_PROG_ADR &= ~CPLD_PROG_DAT; /* PROGRAM_OE LOW */ + delay(); + + /* + * Bring Program High-Z + * (Drive Program_OE bit low to bring Virtex Program Pin to High-Z + */ + + /* Program_OE bit Low brings the Virtex Program Pin to High Z: */ + *CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */ + + while ((*CPLD_INIT_ADR & CPLD_INIT_DAT) == 0) + delay(); + + /* Begin Slave-Serial Configuration */ + flash = (unsigned char *)CPLD_NOMAL_START; + + for (i = 0; i < CPLD_DATA_SIZE; i++) + write_cpld_data(*flash++); +} + +/*********************************************************************** + * + * Function: check_done_bit + * + * Description: This function takes monitors the CPLD Input Register + * by checking the status of the DONE bit in that Register. + * By doing so, it monitors the Xilinx Virtex device's DONE + * Pin to see if configuration bitstream has been properly + * loaded + * + ***********************************************************************/ +static void check_done_bit(void) +{ + while (!(*CPLD_DONE_ADR & CPLD_DONE_DAT)) + ; +} + +/*********************************************************************** + * + * Function: init_cpld + * + * Description: Begins Slave Serial configuration of Xilinx FPGA + * + ***********************************************************************/ +void init_cpld(void) +{ + /* Init serial device */ + init_cpld_loader(); + + if (*CPLD_DONE_ADR & CPLD_DONE_DAT) /* Already DONE */ + return; + + *HIZCRB = 0x0000; + *CPLD_PFC_ADR = 0x7c00; /* FPGA PROG = OUTPUT */ + + /* write CPLD data from NOR flash to device */ + slave_serial(); + + /* + * Monitor the DONE bit in the CPLD Input Register to see if + * configuration successful + */ + + check_done_bit(); +} diff --git a/board/ap325rxa/lowlevel_init.S b/board/ap325rxa/lowlevel_init.S new file mode 100644 index 0000000..4f66588 --- /dev/null +++ b/board/ap325rxa/lowlevel_init.S @@ -0,0 +1,243 @@ +/* + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * board/ap325rxa/lowlevel_init.S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/processor.h> + +/* + * Board specific low level init code, called _very_ early in the + * startup sequence. Relocation to SDRAM has not happened yet, no + * stack is available, bss section has not been initialised, etc. + * + * (Note: As no stack is available, no subroutines can be called...). + */ + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + mov.l DRVCRA_A, r1 + mov.l DRVCRA_D, r0 + mov.w r0, @r1 + + mov.l DRVCRB_A, r1 + mov.l DRVCRB_D, r0 + mov.w r0, @r1 + + mov.l RWTCSR_A, r1 + mov.l RWTCSR_D1, r0 + mov.w r0, @r1 + + mov.l RWTCNT_A, r1 + mov.l RWTCNT_D, r0 + mov.w r0, @r1 + + mov.l RWTCSR_A, r1 + mov.l RWTCSR_D2, r0 + mov.w r0, @r1 + + mov.l FRQCR_A, r1 + mov.l FRQCR_D, r0 + mov.l r0, @r1 + + mov.l CMNCR_A, r1 + mov.l CMNCR_D, r0 + mov.l r0, @r1 + + mov.l CS0BCR_A ,r1 + mov.l CS0BCR_D ,r0 + mov.l r0, @r1 + + mov.l CS4BCR_A ,r1 + mov.l CS4BCR_D ,r0 + mov.l r0, @r1 + + mov.l CS5ABCR_A ,r1 + mov.l CS5ABCR_D ,r0 + mov.l r0, @r1 + + mov.l CS5BBCR_A ,r1 + mov.l CS5BBCR_D ,r0 + mov.l r0, @r1 + + mov.l CS6ABCR_A ,r1 + mov.l CS6ABCR_D ,r0 + mov.l r0, @r1 + + mov.l CS6BBCR_A ,r1 + mov.l CS6BBCR_D ,r0 + mov.l r0, @r1 + + mov.l CS0WCR_A ,r1 + mov.l CS0WCR_D ,r0 + mov.l r0, @r1 + + mov.l CS4WCR_A ,r1 + mov.l CS4WCR_D ,r0 + mov.l r0, @r1 + + mov.l CS5AWCR_A ,r1 + mov.l CS5AWCR_D ,r0 + mov.l r0, @r1 + + mov.l CS5BWCR_A ,r1 + mov.l CS5BWCR_D ,r0 + mov.l r0, @r1 + + mov.l CS6AWCR_A ,r1 + mov.l CS6AWCR_D ,r0 + mov.l r0, @r1 + + mov.l CS6BWCR_A ,r1 + mov.l CS6BWCR_D ,r0 + mov.l r0, @r1 + + mov.l SBSC_SDCR_A, r1 + mov.l SBSC_SDCR_D1, r0 + mov.l r0, @r1 + + mov.l SBSC_SDWCR_A, r1 + mov.l SBSC_SDWCR_D, r0 + mov.l r0, @r1 + + mov.l SBSC_SDPCR_A, r1 + mov.l SBSC_SDPCR_D, r0 + mov.l r0, @r1 + + mov.l SBSC_RTCSR_A, r1 + mov.l SBSC_RTCSR_D, r0 + mov.l r0, @r1 + + mov.l SBSC_RTCNT_A, r1 + mov.l SBSC_RTCNT_D, r0 + mov.l r0, @r1 + + mov.l SBSC_RTCOR_A, r1 + mov.l SBSC_RTCOR_D, r0 + mov.l r0, @r1 + + mov.l SBSC_SDMR3_A1, r1 + mov.l SBSC_SDMR3_D, r0 + mov.b r0, @r1 + + mov.l SBSC_SDMR3_A2, r1 + mov.l SBSC_SDMR3_D, r0 + mov.b r0, @r1 + + mov.l SLEEP_CNT, r1 +2: tst r1, r1 + nop + bf/s 2b + dt r1 + + mov.l SBSC_SDMR3_A3, r1 + mov.l SBSC_SDMR3_D, r0 + mov.b r0, @r1 + + mov.l SBSC_SDCR_A, r1 + mov.l SBSC_SDCR_D2, r0 + mov.l r0, @r1 + + mov.l CCR_A, r1 + mov.l CCR_D, r0 + mov.l r0, @r1 + + ! BL bit off (init = ON) (?!?) + + stc sr, r0 ! BL bit off(init=ON) + mov.l SR_MASK_D, r1 + and r1, r0 + ldc r0, sr + + rts + mov #0, r0 + + .align 2 + +DRVCRA_A: .long DRVCRA +DRVCRB_A: .long DRVCRB +DRVCRA_D: .long 0x4555 +DRVCRB_D: .long 0x0005 + +RWTCSR_A: .long RWTCSR +RWTCNT_A: .long RWTCNT +FRQCR_A: .long FRQCR +RWTCSR_D1: .long 0xa507 +RWTCSR_D2: .long 0xa504 +RWTCNT_D: .long 0x5a00 +FRQCR_D: .long 0x0b04474a + +SBSC_SDCR_A: .long SBSC_SDCR +SBSC_SDWCR_A: .long SBSC_SDWCR +SBSC_SDPCR_A: .long SBSC_SDPCR +SBSC_RTCSR_A: .long SBSC_RTCSR +SBSC_RTCNT_A: .long SBSC_RTCNT +SBSC_RTCOR_A: .long SBSC_RTCOR +SBSC_SDMR3_A1: .long 0xfe510000 +SBSC_SDMR3_A2: .long 0xfe500242 +SBSC_SDMR3_A3: .long 0xfe5c0042 + +SBSC_SDCR_D1: .long 0x92810112 +SBSC_SDCR_D2: .long 0x92810912 +SBSC_SDWCR_D: .long 0x05162482 +SBSC_SDPCR_D: .long 0x00300087 +SBSC_RTCSR_D: .long 0xa55a0212 +SBSC_RTCNT_D: .long 0xa55a0000 +SBSC_RTCOR_D: .long 0xa55a0040 +SBSC_SDMR3_D: .long 0x00 + +CMNCR_A: .long CMNCR +CS0BCR_A: .long CS0BCR +CS4BCR_A: .long CS4BCR +CS5ABCR_A: .long CS5ABCR +CS5BBCR_A: .long CS5BBCR +CS6ABCR_A: .long CS6ABCR +CS6BBCR_A: .long CS6BBCR +CS0WCR_A: .long CS0WCR +CS4WCR_A: .long CS4WCR +CS5AWCR_A: .long CS5AWCR +CS5BWCR_A: .long CS5BWCR +CS6AWCR_A: .long CS6AWCR +CS6BWCR_A: .long CS6BWCR + +CMNCR_D: .long 0x00000013 +CS0BCR_D: .long 0x24920400 +CS4BCR_D: .long 0x24920400 +CS5ABCR_D: .long 0x24920400 +CS5BBCR_D: .long 0x7fff0600 +CS6ABCR_D: .long 0x24920400 +CS6BBCR_D: .long 0x24920600 +CS0WCR_D: .long 0x00000480 +CS4WCR_D: .long 0x00000480 +CS5AWCR_D: .long 0x00000380 +CS5BWCR_D: .long 0x00000600 +CS6AWCR_D: .long 0x00000300 +CS6BWCR_D: .long 0x00000540 + +CCR_A: .long 0xff00001c +CCR_D: .long 0x0000090d + +SLEEP_CNT: .long 0x00000800 +SR_MASK_D: .long 0xEFFFFF0F diff --git a/board/ap325rxa/u-boot.lds b/board/ap325rxa/u-boot.lds new file mode 100644 index 0000000..a670374 --- /dev/null +++ b/board/ap325rxa/u-boot.lds @@ -0,0 +1,106 @@ +/* + * Copyrigth (c) 2007 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + /* + Base address of internal SDRAM is 0x88000000. + Although size of SDRAM can be either 16 or 32 MBytes, + we assume 16 MBytes (ie ignore upper half if the full + 32 MBytes is present). + + NOTE: This address must match with the definition of + TEXT_BASE in config.mk (in this directory). + + */ + . = 0x88000000 + (128*1024*1024) - (256*1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh4/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + /* _reloc_dst_end = .; */ + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} + diff --git a/board/freescale/m54451evb/m54451evb.c b/board/freescale/m54451evb/m54451evb.c index 5b33a83..768f40b 100644 --- a/board/freescale/m54451evb/m54451evb.c +++ b/board/freescale/m54451evb/m54451evb.c @@ -49,7 +49,7 @@ phys_size_t initdram(int board_type) * Serial Boot: The dram is already initialized in start.S * only require to return DRAM size */ - dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1; + dramsize = CFG_SDRAM_SIZE * 0x100000; #else volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); @@ -67,7 +67,7 @@ phys_size_t initdram(int board_type) } i--; - gpio->mscr_sdram = 0x44; + gpio->mscr_sdram = CFG_SDRAM_DRV_STRENGTH; sdram->sdcs0 = (CFG_SDRAM_BASE | i); diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c index 4f02121..100682a 100644 --- a/board/freescale/m54455evb/m54455evb.c +++ b/board/freescale/m54455evb/m54455evb.c @@ -171,7 +171,7 @@ void pci_init_board(void) } #endif /* CONFIG_PCI */ -#if defined(CFG_FLASH_CFI) +#if defined(CONFIG_FLASH_CFI_LEGACY) #include <flash.h> ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) { @@ -189,7 +189,7 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) info->erase_blk_tout = 16384; info->write_tout = 2; info->buffer_write_tout = 5; - info->vendor = 2; /* CFI_CMDSET_AMD_STANDARD */ + info->vendor = 0xFFF0; /* CFI_CMDSET_AMD_LEGACY */ info->cmd_reset = 0x00F0; info->interface = FLASH_CFI_X8; info->legacy_unlock = 0; @@ -199,12 +199,11 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) info->ext_addr = 0; info->cfi_version = 0x3133; - info->cfi_offset = 0x0055; + info->cfi_offset = 0x0000; info->addr_unlock1 = 0x00000555; info->addr_unlock2 = 0x000002AA; info->name = "CFI conformant"; - info->size = 0; info->sector_count = CFG_ATMEL_TOTALSECT; info->start[0] = base; diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c index 7a59aa0..0be5439 100644 --- a/board/freescale/m54455evb/mii.c +++ b/board/freescale/m54455evb/mii.c @@ -237,6 +237,10 @@ void __mii_init(void) fecp = (fec_t *) info->miibase; + fecpin_setclear(dev, 1); + + mii_reset(info); + /* We use strictly polling mode only */ fecp->eimr = 0; diff --git a/board/rsk7203/Makefile b/board/rsk7203/Makefile new file mode 100644 index 0000000..7365d19 --- /dev/null +++ b/board/rsk7203/Makefile @@ -0,0 +1,45 @@ +# +# Copyright (C) 2007,2008 Nobuhiro Iwamatsu +# Copyright (C) 2008 Renesas Solutions Corp. +# +# u-boot/board/rsk7203/Makefile +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := rsk7203.o +SOBJS := lowlevel_init.o + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/rsk7203/config.mk b/board/rsk7203/config.mk new file mode 100644 index 0000000..61aa51f --- /dev/null +++ b/board/rsk7203/config.mk @@ -0,0 +1,28 @@ +# +# Copyright (C) 2007,2008 Nobuhiro Iwamatsu +# Copyright (C) 2008 Renesas Solutions Corp. +# +# u-boot/board/rsk7203/config.mk +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# + +TEXT_BASE = 0x0C7C0000 diff --git a/board/rsk7203/lowlevel_init.S b/board/rsk7203/lowlevel_init.S new file mode 100644 index 0000000..e4d6f9e --- /dev/null +++ b/board/rsk7203/lowlevel_init.S @@ -0,0 +1,265 @@ +/* + * Copyright (C) 2008 Nobuhiro Iwamatsu + * Copyright (C) 2008 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <config.h> +#include <version.h> + +#include <asm/processor.h> + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + /* Cache setting */ + mov.l CCR1_A ,r1 + mov.l CCR1_D ,r0 + mov.l r0,@r1 + + /* ConfigurePortPins */ + mov.l PECRL3_A, r1 + mov.l PECRL3_D, r0 + mov.w r0,@r1 + + mov.l PCCRL4_A, r1 + mov.l PCCRL4_D0, r0 + mov.w r0,@r1 + + mov.l PECRL4_A, r1 + mov.l PECRL4_D0, r0 + mov.w r0,@r1 + + mov.l PEIORL_A, r1 + mov.l PEIORL_D0, r0 + mov.w r0,@r1 + + mov.l PCIORL_A, r1 + mov.l PCIORL_D, r0 + mov.w r0,@r1 + + mov.l PFCRH2_A, r1 + mov.l PFCRH2_D, r0 + mov.w r0,@r1 + + mov.l PFCRH3_A, r1 + mov.l PFCRH3_D, r0 + mov.w r0,@r1 + + mov.l PFCRH1_A, r1 + mov.l PFCRH1_D, r0 + mov.w r0,@r1 + + mov.l PFIORH_A, r1 + mov.l PFIORH_D, r0 + mov.w r0,@r1 + + mov.l PECRL1_A, r1 + mov.l PECRL1_D0, r0 + mov.w r0,@r1 + + mov.l PEIORL_A, r1 + mov.l PEIORL_D1, r0 + mov.w r0,@r1 + + /* Configure Operating Frequency */ + mov.l WTCSR_A ,r1 + mov.l WTCSR_D0 ,r0 + mov.w r0,@r1 + + mov.l WTCSR_A ,r1 + mov.l WTCSR_D1 ,r0 + mov.w r0,@r1 + + mov.l WTCNT_A ,r1 + mov.l WTCNT_D ,r0 + mov.w r0,@r1 + + /* Set clock mode*/ + mov.l FRQCR_A,r1 + mov.l FRQCR_D,r0 + mov.w r0,@r1 + + /* Configure Bus And Memory */ +init_bsc_cs0: + mov.l PCCRL4_A,r1 + mov.l PCCRL4_D1,r0 + mov.w r0,@r1 + + mov.l PECRL1_A,r1 + mov.l PECRL1_D1,r0 + mov.w r0,@r1 + + mov.l CMNCR_A,r1 + mov.l CMNCR_D,r0 + mov.l r0,@r1 + + mov.l SC0BCR_A,r1 + mov.l SC0BCR_D,r0 + mov.l r0,@r1 + + mov.l CS0WCR_A,r1 + mov.l CS0WCR_D,r0 + mov.l r0,@r1 + +init_bsc_cs1: + mov.l PECRL4_A,r1 + mov.l PECRL4_D1,r0 + mov.w r0,@r1 + + mov.l CS1WCR_A,r1 + mov.l CS1WCR_D,r0 + mov.l r0,@r1 + +init_sdram: + mov.l PCCRL2_A,r1 + mov.l PCCRL2_D,r0 + mov.w r0,@r1 + + mov.l PCCRL4_A,r1 + mov.l PCCRL4_D2,r0 + mov.w r0,@r1 + + mov.l PCCRL1_A,r1 + mov.l PCCRL1_D,r0 + mov.w r0,@r1 + + mov.l PCCRL3_A,r1 + mov.l PCCRL3_D,r0 + mov.w r0,@r1 + + mov.l CS3BCR_A,r1 + mov.l CS3BCR_D,r0 + mov.l r0,@r1 + + mov.l CS3WCR_A,r1 + mov.l CS3WCR_D,r0 + mov.l r0,@r1 + + mov.l SDCR_A,r1 + mov.l SDCR_D,r0 + mov.l r0,@r1 + + mov.l RTCOR_A,r1 + mov.l RTCOR_D,r0 + mov.l r0,@r1 + + mov.l RTCSR_A,r1 + mov.l RTCSR_D,r0 + mov.l r0,@r1 + + /* wait 200us */ + mov.l REPEAT_D,r3 + mov #0,r2 +repeat0: + add #1,r2 + cmp/hs r3,r2 + bf repeat0 + nop + + mov.l SDRAM_MODE, r1 + mov #0,r0 + mov.l r0, @r1 + + nop + rts + + .align 4 + +CCR1_A: .long CCR1 +CCR1_D: .long 0x0000090B +PCCRL4_A: .long 0xFFFE3910 +PCCRL4_D0: .long 0x00000000 +PECRL4_A: .long 0xFFFE3A10 +PECRL4_D0: .long 0x00000000 +PECRL3_A: .long 0xFFFE3A12 +PECRL3_D: .long 0x00000000 +PEIORL_A: .long 0xFFFE3A06 +PEIORL_D0: .long 0x00001C00 +PEIORL_D1: .long 0x00001C02 +PCIORL_A: .long 0xFFFE3906 +PCIORL_D: .long 0x00004000 +PFCRH2_A: .long 0xFFFE3A8C +PFCRH2_D: .long 0x00000000 +PFCRH3_A: .long 0xFFFE3A8A +PFCRH3_D: .long 0x00000000 +PFCRH1_A: .long 0xFFFE3A8E +PFCRH1_D: .long 0x00000000 +PFIORH_A: .long 0xFFFE3A84 +PFIORH_D: .long 0x00000729 +PECRL1_A: .long 0xFFFE3A16 +PECRL1_D0: .long 0x00000033 + + +WTCSR_A: .long 0xFFFE0000 +WTCSR_D0: .long 0x0000A518 +WTCSR_D1: .long 0x0000A51D +WTCNT_A: .long 0xFFFE0002 +WTCNT_D: .long 0x00005A84 +FRQCR_A: .long 0xFFFE0010 +FRQCR_D: .long 0x00000104 + +PCCRL4_D1: .long 0x00000010 +PECRL1_D1: .long 0x00000133 + +CMNCR_A: .long 0xFFFC0000 +CMNCR_D: .long 0x00001810 +SC0BCR_A: .long 0xFFFC0004 +SC0BCR_D: .long 0x10000400 +CS0WCR_A: .long 0xFFFC0028 +CS0WCR_D: .long 0x00000B41 +PECRL4_D1: .long 0x00000100 +CS1WCR_A: .long 0xFFFC002C +CS1WCR_D: .long 0x00000B01 +PCCRL4_D2: .long 0x00000011 +PCCRL3_A: .long 0xFFFE3912 +PCCRL3_D: .long 0x00000011 +PCCRL2_A: .long 0xFFFE3914 +PCCRL2_D: .long 0x00001111 +PCCRL1_A: .long 0xFFFE3916 +PCCRL1_D: .long 0x00001010 +PDCRL4_A: .long 0xFFFE3990 +PDCRL4_D: .long 0x00000011 +PDCRL3_A: .long 0xFFFE3992 +PDCRL3_D: .long 0x00000011 +PDCRL2_A: .long 0xFFFE3994 +PDCRL2_D: .long 0x00001111 +PDCRL1_A: .long 0xFFFE3996 +PDCRL1_D: .long 0x00001000 +CS3BCR_A: .long 0xFFFC0010 +CS3BCR_D: .long 0x00004400 +CS3WCR_A: .long 0xFFFC0034 +CS3WCR_D: .long 0x00002892 +SDCR_A: .long 0xFFFC004C +SDCR_D: .long 0x00000809 +RTCOR_A: .long 0xFFFC0058 +RTCOR_D: .long 0xA55A0041 +RTCSR_A: .long 0xFFFC0050 +RTCSR_D: .long 0xa55a0010 + +STBCR3_A: .long 0xFFFE0408 +STBCR3_D: .long 0x00000000 +STBCR4_A: .long 0xFFFE040C +STBCR4_D: .long 0x00000008 +STBCR5_A: .long 0xFFFE0410 +STBCR5_D: .long 0x00000000 +STBCR6_A: .long 0xFFFE0414 +STBCR6_D: .long 0x00000002 +SDRAM_MODE: .long 0xFFFC5040 +REPEAT_D: .long 0x00009C40 diff --git a/board/rsk7203/rsk7203.c b/board/rsk7203/rsk7203.c new file mode 100644 index 0000000..beb943e --- /dev/null +++ b/board/rsk7203/rsk7203.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2008 Nobuhiro Iwamatsu + * Copyright (C) 2008 Renesas Solutions Corp. + * + * u-boot/board/rsk7203/rsk7203.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> + +int checkboard(void) +{ + puts("BOARD: Renesas Technology RSK7203\n"); + return 0; +} + +int board_init(void) +{ + return 0; +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +void led_set_state(unsigned short value) +{ +} diff --git a/board/rsk7203/u-boot.lds b/board/rsk7203/u-boot.lds new file mode 100644 index 0000000..bf4433a --- /dev/null +++ b/board/rsk7203/u-boot.lds @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2008 Nobuhiro Iwamatsu + * Copyright (C) 2008 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + /* + * Base address of internal SDRAM is 0x0C000000. + * + * NOTE: This address must match with the definition of + *TEXT_BASE in config.mk (in this directory). + */ + + . = 0x0C000000 + (8*1024*1024) - (256*1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh2/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} diff --git a/board/sh7785lcr/Makefile b/board/sh7785lcr/Makefile new file mode 100644 index 0000000..b1b538c --- /dev/null +++ b/board/sh7785lcr/Makefile @@ -0,0 +1,42 @@ +# +# Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +COBJS := sh7785lcr.o selfcheck.o rtl8169_mac.o +SOBJS := lowlevel_init.o + +$(LIB): $(obj).depend $(COBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(COBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/sh7785lcr/config.mk b/board/sh7785lcr/config.mk new file mode 100644 index 0000000..93761ee --- /dev/null +++ b/board/sh7785lcr/config.mk @@ -0,0 +1,26 @@ +# +# Copyright (C) 2007 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# +TEXT_BASE = 0x0ff80000 + diff --git a/board/sh7785lcr/lowlevel_init.S b/board/sh7785lcr/lowlevel_init.S new file mode 100644 index 0000000..8126296 --- /dev/null +++ b/board/sh7785lcr/lowlevel_init.S @@ -0,0 +1,318 @@ +/* + * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <config.h> +#include <version.h> +#include <asm/processor.h> + +.macro write32, addr, data + mov.l \addr ,r1 + mov.l \data ,r0 + mov.l r0, @r1 +.endm + +.macro write16, addr, data + mov.l \addr ,r1 + mov.l \data ,r0 + mov.w r0, @r1 +.endm + +.macro write8, addr, data + mov.l \addr ,r1 + mov.l \data ,r0 + mov.b r0, @r1 +.endm + +.macro wait_timer, time + mov.l \time ,r3 +1: + nop + tst r3, r3 + bf/s 1b + dt r3 +.endm + +#include <asm/processor.h> + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + wait_timer WAIT_200US + wait_timer WAIT_200US + + /*------- LBSC -------*/ + write32 MMSELR_A, MMSELR_D + + /*------- DBSC2 -------*/ + write32 DBSC2_DBCONF_A, DBSC2_DBCONF_D + write32 DBSC2_DBTR0_A, DBSC2_DBTR0_D + write32 DBSC2_DBTR1_A, DBSC2_DBTR1_D + write32 DBSC2_DBTR2_A, DBSC2_DBTR2_D + write32 DBSC2_DBFREQ_A, DBSC2_DBFREQ_D1 + write32 DBSC2_DBFREQ_A, DBSC2_DBFREQ_D2 + wait_timer WAIT_200US + + write32 DBSC2_DBDICODTOCD_A, DBSC2_DBDICODTOCD_D + write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_CKE_H + wait_timer WAIT_200US + write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_PALL + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS2 + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS3 + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_1 + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_MRS_1 + write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_PALL + write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_REF + write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_REF + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_MRS_2 + wait_timer WAIT_200US + + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_2 + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_1 + + write32 DBSC2_DBEN_A, DBSC2_DBEN_D + write32 DBSC2_DBRFCNT1_A, DBSC2_DBRFCNT1_D + write32 DBSC2_DBRFCNT2_A, DBSC2_DBRFCNT2_D + write32 DBSC2_DBRFCNT0_A, DBSC2_DBRFCNT0_D + wait_timer WAIT_200US + + /*------- GPIO -------*/ + write16 PACR_A, PACR_D + write16 PBCR_A, PBCR_D + write16 PCCR_A, PCCR_D + write16 PDCR_A, PDCR_D + write16 PECR_A, PECR_D + write16 PFCR_A, PFCR_D + write16 PGCR_A, PGCR_D + write16 PHCR_A, PHCR_D + write16 PJCR_A, PJCR_D + write16 PKCR_A, PKCR_D + write16 PLCR_A, PLCR_D + write16 PMCR_A, PMCR_D + write16 PNCR_A, PNCR_D + write16 PPCR_A, PPCR_D + write16 PQCR_A, PQCR_D + write16 PRCR_A, PRCR_D + + write8 PEPUPR_A, PEPUPR_D + write8 PHPUPR_A, PHPUPR_D + write8 PJPUPR_A, PJPUPR_D + write8 PKPUPR_A, PKPUPR_D + write8 PLPUPR_A, PLPUPR_D + write8 PMPUPR_A, PMPUPR_D + write8 PNPUPR_A, PNPUPR_D + write16 PPUPR1_A, PPUPR1_D + write16 PPUPR2_A, PPUPR2_D + write16 P1MSELR_A, P1MSELR_D + write16 P2MSELR_A, P2MSELR_D + + /*------- LBSC -------*/ + write32 BCR_A, BCR_D + write32 CS0BCR_A, CS0BCR_D + write32 CS0WCR_A, CS0WCR_D + write32 CS1BCR_A, CS1BCR_D + write32 CS1WCR_A, CS1WCR_D + write32 CS4BCR_A, CS4BCR_D + write32 CS4WCR_A, CS4WCR_D + + mov.l PASCR_A, r0 + mov.l @r0, r2 + mov.l PASCR_32BIT_MODE, r1 + tst r1, r2 + bt lbsc_29bit + + write32 CS2BCR_A, CS_USB_BCR_D + write32 CS2WCR_A, CS_USB_WCR_D + write32 CS3BCR_A, CS_SD_BCR_D + write32 CS3WCR_A, CS_SD_WCR_D + write32 CS5BCR_A, CS_I2C_BCR_D + write32 CS5WCR_A, CS_I2C_WCR_D + write32 CS6BCR_A, CS0BCR_D + write32 CS6WCR_A, CS0WCR_D + bra lbsc_end + nop + +lbsc_29bit: + write32 CS5BCR_A, CS_USB_BCR_D + write32 CS5WCR_A, CS_USB_WCR_D + write32 CS6BCR_A, CS_SD_BCR_D + write32 CS6WCR_A, CS_SD_WCR_D + +lbsc_end: + + write32 CCR_A, CCR_D + + rts + nop + + .align 4 + +/*------- LBSC -------*/ +MMSELR_A: .long 0xfc400020 +MMSELR_D: .long 0xa5a50002 + +/*------- DBSC2 -------*/ +#define DBSC2_BASE 0xfe800000 +DBSC2_DBSTATE_A: .long DBSC2_BASE + 0x0c +DBSC2_DBEN_A: .long DBSC2_BASE + 0x10 +DBSC2_DBCMDCNT_A: .long DBSC2_BASE + 0x14 +DBSC2_DBCONF_A: .long DBSC2_BASE + 0x20 +DBSC2_DBTR0_A: .long DBSC2_BASE + 0x30 +DBSC2_DBTR1_A: .long DBSC2_BASE + 0x34 +DBSC2_DBTR2_A: .long DBSC2_BASE + 0x38 +DBSC2_DBRFCNT0_A: .long DBSC2_BASE + 0x40 +DBSC2_DBRFCNT1_A: .long DBSC2_BASE + 0x44 +DBSC2_DBRFCNT2_A: .long DBSC2_BASE + 0x48 +DBSC2_DBRFSTS_A: .long DBSC2_BASE + 0x4c +DBSC2_DBFREQ_A: .long DBSC2_BASE + 0x50 +DBSC2_DBDICODTOCD_A: .long DBSC2_BASE + 0x54 +DBSC2_DBMRCNT_A: .long DBSC2_BASE + 0x60 +DDR_DUMMY_ACCESS_A: .long 0x40000000 + +DBSC2_DBCONF_D: .long 0x00630002 +DBSC2_DBTR0_D: .long 0x050b1f04 +DBSC2_DBTR1_D: .long 0x00040204 +DBSC2_DBTR2_D: .long 0x02100308 +DBSC2_DBFREQ_D1: .long 0x00000000 +DBSC2_DBFREQ_D2: .long 0x00000100 +DBSC2_DBDICODTOCD_D: .long 0x000f0907 + +DBSC2_DBCMDCNT_D_CKE_H: .long 0x00000003 +DBSC2_DBCMDCNT_D_PALL: .long 0x00000002 +DBSC2_DBCMDCNT_D_REF: .long 0x00000004 + +DBSC2_DBMRCNT_D_EMRS2: .long 0x00020000 +DBSC2_DBMRCNT_D_EMRS3: .long 0x00030000 +DBSC2_DBMRCNT_D_EMRS1_1: .long 0x00010006 +DBSC2_DBMRCNT_D_EMRS1_2: .long 0x00010386 +DBSC2_DBMRCNT_D_MRS_1: .long 0x00000952 +DBSC2_DBMRCNT_D_MRS_2: .long 0x00000852 + +DBSC2_DBEN_D: .long 0x00000001 + +DBSC2_DBPDCNT0_D3: .long 0x00000080 +DBSC2_DBRFCNT1_D: .long 0x00000926 +DBSC2_DBRFCNT2_D: .long 0x00fe00fe +DBSC2_DBRFCNT0_D: .long 0x00010000 + +WAIT_200US: .long 33333 + +/*------- GPIO -------*/ +#define GPIO_BASE 0xffe70000 +PACR_A: .long GPIO_BASE + 0x00 +PBCR_A: .long GPIO_BASE + 0x02 +PCCR_A: .long GPIO_BASE + 0x04 +PDCR_A: .long GPIO_BASE + 0x06 +PECR_A: .long GPIO_BASE + 0x08 +PFCR_A: .long GPIO_BASE + 0x0a +PGCR_A: .long GPIO_BASE + 0x0c +PHCR_A: .long GPIO_BASE + 0x0e +PJCR_A: .long GPIO_BASE + 0x10 +PKCR_A: .long GPIO_BASE + 0x12 +PLCR_A: .long GPIO_BASE + 0x14 +PMCR_A: .long GPIO_BASE + 0x16 +PNCR_A: .long GPIO_BASE + 0x18 +PPCR_A: .long GPIO_BASE + 0x1a +PQCR_A: .long GPIO_BASE + 0x1c +PRCR_A: .long GPIO_BASE + 0x1e +PEPUPR_A: .long GPIO_BASE + 0x48 +PHPUPR_A: .long GPIO_BASE + 0x4e +PJPUPR_A: .long GPIO_BASE + 0x50 +PKPUPR_A: .long GPIO_BASE + 0x52 +PLPUPR_A: .long GPIO_BASE + 0x54 +PMPUPR_A: .long GPIO_BASE + 0x56 +PNPUPR_A: .long GPIO_BASE + 0x58 +PPUPR1_A: .long GPIO_BASE + 0x60 +PPUPR2_A: .long GPIO_BASE + 0x62 +P1MSELR_A: .long GPIO_BASE + 0x80 +P2MSELR_A: .long GPIO_BASE + 0x82 + +PACR_D: .long 0x0000 +PBCR_D: .long 0x0000 +PCCR_D: .long 0x0000 +PDCR_D: .long 0x0000 +PECR_D: .long 0x0000 +PFCR_D: .long 0x0000 +PGCR_D: .long 0x0000 +PHCR_D: .long 0x00c0 +PJCR_D: .long 0xc3fc +PKCR_D: .long 0x03ff +PLCR_D: .long 0x0000 +PMCR_D: .long 0xffff +PNCR_D: .long 0xf0c3 +PPCR_D: .long 0x0000 +PQCR_D: .long 0x0000 +PRCR_D: .long 0x0000 + +PEPUPR_D: .long 0xff +PHPUPR_D: .long 0x00 +PJPUPR_D: .long 0x00 +PKPUPR_D: .long 0x00 +PLPUPR_D: .long 0x00 +PMPUPR_D: .long 0xfc +PNPUPR_D: .long 0x00 +PPUPR1_D: .long 0xffbf +PPUPR2_D: .long 0xff00 +P1MSELR_D: .long 0x3780 +P2MSELR_D: .long 0x0000 + +/*------- LBSC -------*/ +PASCR_A: .long 0xff000070 +PASCR_32BIT_MODE: .long 0x80000000 /* check booting mode */ + +BCR_A: .long BCR +CS0BCR_A: .long CS0BCR +CS0WCR_A: .long CS0WCR +CS1BCR_A: .long CS1BCR +CS1WCR_A: .long CS1WCR +CS2BCR_A: .long CS2BCR +CS2WCR_A: .long CS2WCR +CS3BCR_A: .long CS3BCR +CS3WCR_A: .long CS3WCR +CS4BCR_A: .long CS4BCR +CS4WCR_A: .long CS4WCR +CS5BCR_A: .long CS5BCR +CS5WCR_A: .long CS5WCR +CS6BCR_A: .long CS6BCR +CS6WCR_A: .long CS6WCR + +BCR_D: .long 0x80000003 +CS0BCR_D: .long 0x22222340 +CS0WCR_D: .long 0x00111118 +CS1BCR_D: .long 0x11111100 +CS1WCR_D: .long 0x33333303 +CS4BCR_D: .long 0x11111300 +CS4WCR_D: .long 0x00101012 + +/* USB setting : 32bit mode = CS2, 29bit mode = CS5 */ +CS_USB_BCR_D: .long 0x11111200 +CS_USB_WCR_D: .long 0x00020004 + +/* SD setting : 32bit mode = CS3, 29bit mode = CS6 */ +CS_SD_BCR_D: .long 0x00000300 +CS_SD_WCR_D: .long 0x00030108 + +/* I2C setting : 32bit mode = CS5, 29bit mode = CS1(already setting) */ +CS_I2C_BCR_D: .long 0x11111100 +CS_I2C_WCR_D: .long 0x00000003 + +CCR_A: .long 0xff00001c +CCR_D: .long 0x0000090b + diff --git a/board/sh7785lcr/rtl8169.h b/board/sh7785lcr/rtl8169.h new file mode 100644 index 0000000..d1c0d64 --- /dev/null +++ b/board/sh7785lcr/rtl8169.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define PCIREG_8(_adr) (*(volatile unsigned char *)(_adr)) +#define PCIREG_32(_adr) (*(volatile unsigned long *)(_adr)) +#define PCI_PAR PCIREG_32(0xfe0401c0) +#define PCI_PDR PCIREG_32(0xfe040220) +#define PCI_CR PCIREG_32(0xfe040100) +#define PCI_CONF1 PCIREG_32(0xfe040004) + +#define HIGH 1 +#define LOW 0 + +#define PCI_PROG 0x80 +#define PCI_EEP_ADDRESS (unsigned short)0x0007 +#define PCI_MAC_ADDRESS_SIZE 3 + +#define TIME1 100 +#define TIME2 20000 + +#define BIT_DUMMY 0 +#define MAC_EEP_READ 1 +#define MAC_EEP_WRITE 2 +#define MAC_EEP_ERACE 3 +#define MAC_EEP_EWEN 4 +#define MAC_EEP_EWDS 5 + +/* RTL8169 */ +const unsigned short EEPROM_W_Data_8169_A[] = { + 0x8129, 0x10ec, 0x8169, 0x1154, 0x032b, + 0x4020, 0xa101 +}; +const unsigned short EEPROM_W_Data_8169_B[] = { + 0x4d15, 0xf7c2, 0x8000, 0x0000, 0x0000, 0x1300, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x2000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 +}; + diff --git a/board/sh7785lcr/rtl8169_mac.c b/board/sh7785lcr/rtl8169_mac.c new file mode 100644 index 0000000..2bc873b --- /dev/null +++ b/board/sh7785lcr/rtl8169_mac.c @@ -0,0 +1,349 @@ +/* + * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include "rtl8169.h" + +static unsigned char *PCI_MEMR; + +static void mac_delay(unsigned int cnt) +{ + udelay(cnt); +} + +static void mac_pci_setup(void) +{ + unsigned long pci_data; + + PCI_PAR = 0x00000010; + PCI_PDR = 0x00001000; + PCI_PAR = 0x00000004; + pci_data = PCI_PDR; + PCI_PDR = pci_data | 0x00000007; + PCI_PAR = 0x00000010; + + PCI_MEMR = (unsigned char *)((PCI_PDR | 0xFE240050) & 0xFFFFFFF0); +} + +static void EECS(int level) +{ + unsigned char data = *PCI_MEMR; + + if (level) + *PCI_MEMR = data | 0x08; + else + *PCI_MEMR = data & 0xf7; +} + +static void EECLK(int level) +{ + unsigned char data = *PCI_MEMR; + + if (level) + *PCI_MEMR = data | 0x04; + else + *PCI_MEMR = data & 0xfb; +} + +static void EEDI(int level) +{ + unsigned char data = *PCI_MEMR; + + if (level) + *PCI_MEMR = data | 0x02; + else + *PCI_MEMR = data & 0xfd; +} + +static inline void sh7785lcr_bitset(unsigned short bit) +{ + if (bit) + EEDI(HIGH); + else + EEDI(LOW); + + EECLK(LOW); + mac_delay(TIME1); + EECLK(HIGH); + mac_delay(TIME1); + EEDI(LOW); +} + +static inline unsigned char sh7785lcr_bitget(void) +{ + unsigned char bit; + + EECLK(LOW); + mac_delay(TIME1); + bit = *PCI_MEMR & 0x01; + EECLK(HIGH); + mac_delay(TIME1); + + return bit; +} + +static inline void sh7785lcr_setcmd(unsigned char command) +{ + sh7785lcr_bitset(BIT_DUMMY); + switch (command) { + case MAC_EEP_READ: + sh7785lcr_bitset(1); + sh7785lcr_bitset(1); + sh7785lcr_bitset(0); + break; + case MAC_EEP_WRITE: + sh7785lcr_bitset(1); + sh7785lcr_bitset(0); + sh7785lcr_bitset(1); + break; + case MAC_EEP_ERACE: + sh7785lcr_bitset(1); + sh7785lcr_bitset(1); + sh7785lcr_bitset(1); + break; + case MAC_EEP_EWEN: + sh7785lcr_bitset(1); + sh7785lcr_bitset(0); + sh7785lcr_bitset(0); + break; + case MAC_EEP_EWDS: + sh7785lcr_bitset(1); + sh7785lcr_bitset(0); + sh7785lcr_bitset(0); + break; + default: + break; + } +} + +static inline unsigned short sh7785lcr_getdt(void) +{ + unsigned short data = 0; + int i; + + sh7785lcr_bitget(); /* DUMMY */ + for (i = 0 ; i < 16 ; i++) { + data <<= 1; + data |= sh7785lcr_bitget(); + } + return data; +} + +static inline void sh7785lcr_setadd(unsigned short address) +{ + sh7785lcr_bitset(address & 0x0020); /* A5 */ + sh7785lcr_bitset(address & 0x0010); /* A4 */ + sh7785lcr_bitset(address & 0x0008); /* A3 */ + sh7785lcr_bitset(address & 0x0004); /* A2 */ + sh7785lcr_bitset(address & 0x0002); /* A1 */ + sh7785lcr_bitset(address & 0x0001); /* A0 */ +} + +static inline void sh7785lcr_setdata(unsigned short data) +{ + sh7785lcr_bitset(data & 0x8000); + sh7785lcr_bitset(data & 0x4000); + sh7785lcr_bitset(data & 0x2000); + sh7785lcr_bitset(data & 0x1000); + sh7785lcr_bitset(data & 0x0800); + sh7785lcr_bitset(data & 0x0400); + sh7785lcr_bitset(data & 0x0200); + sh7785lcr_bitset(data & 0x0100); + sh7785lcr_bitset(data & 0x0080); + sh7785lcr_bitset(data & 0x0040); + sh7785lcr_bitset(data & 0x0020); + sh7785lcr_bitset(data & 0x0010); + sh7785lcr_bitset(data & 0x0008); + sh7785lcr_bitset(data & 0x0004); + sh7785lcr_bitset(data & 0x0002); + sh7785lcr_bitset(data & 0x0001); +} + +static void sh7785lcr_datawrite(const unsigned short *data, unsigned short address, + unsigned int count) +{ + unsigned int i; + + for (i = 0; i < count; i++) { + EECS(HIGH); + EEDI(LOW); + mac_delay(TIME1); + + sh7785lcr_setcmd(MAC_EEP_WRITE); + sh7785lcr_setadd(address++); + sh7785lcr_setdata(*(data + i)); + + EECLK(LOW); + EEDI(LOW); + EECS(LOW); + mac_delay(TIME2); + } +} + +static void sh7785lcr_macerase(void) +{ + unsigned int i; + unsigned short pci_address = 7; + + for (i = 0; i < 3; i++) { + EECS(HIGH); + EEDI(LOW); + mac_delay(TIME1); + sh7785lcr_setcmd(MAC_EEP_ERACE); + sh7785lcr_setadd(pci_address++); + mac_delay(TIME1); + EECLK(LOW); + EEDI(LOW); + EECS(LOW); + } + + mac_delay(TIME2); + + printf("\n\nErace End\n"); + for (i = 0; i < 10; i++) + mac_delay(TIME2); +} + +static void sh7785lcr_macwrite(unsigned short *data) +{ + sh7785lcr_macerase(); + + sh7785lcr_datawrite(EEPROM_W_Data_8169_A, 0x0000, 7); + sh7785lcr_datawrite(data, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE); + sh7785lcr_datawrite(EEPROM_W_Data_8169_B, 0x000a, 54); +} + +void sh7785lcr_macdtrd(unsigned char *buf, unsigned short address, unsigned int count) +{ + unsigned int i; + unsigned short wk; + + for (i = 0 ; i < count; i++) { + EECS(HIGH); + EEDI(LOW); + mac_delay(TIME1); + sh7785lcr_setcmd(MAC_EEP_READ); + sh7785lcr_setadd(address++); + wk = sh7785lcr_getdt(); + + *buf++ = (unsigned char)(wk & 0xff); + *buf++ = (unsigned char)((wk >> 8) & 0xff); + EECLK(LOW); + EEDI(LOW); + EECS(LOW); + } +} + +static void sh7785lcr_macadrd(unsigned char *buf) +{ + *PCI_MEMR = PCI_PROG; + + sh7785lcr_macdtrd(buf, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE); +} + +static void sh7785lcr_eepewen(void) +{ + *PCI_MEMR = PCI_PROG; + mac_delay(TIME1); + EECS(LOW); + EECLK(LOW); + EEDI(LOW); + EECS(HIGH); + mac_delay(TIME1); + + sh7785lcr_setcmd(MAC_EEP_EWEN); + sh7785lcr_bitset(1); + sh7785lcr_bitset(1); + sh7785lcr_bitset(BIT_DUMMY); + sh7785lcr_bitset(BIT_DUMMY); + sh7785lcr_bitset(BIT_DUMMY); + sh7785lcr_bitset(BIT_DUMMY); + + EECLK(LOW); + EEDI(LOW); + EECS(LOW); + mac_delay(TIME1); +} + +void mac_write(unsigned short *data) +{ + mac_pci_setup(); + sh7785lcr_eepewen(); + sh7785lcr_macwrite(data); +} + +void mac_read(void) +{ + unsigned char data[6]; + + mac_pci_setup(); + sh7785lcr_macadrd(data); + printf("Mac = %02x:%02x:%02x:%02x:%02x:%02x\n", + data[0], data[1], data[2], data[3], data[4], data[5]); +} + +int do_set_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i; + unsigned char mac[6]; + char *s, *e; + + if (argc != 2) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + s = argv[1]; + + for (i = 0; i < 6; i++) { + mac[i] = s ? simple_strtoul(s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } + mac_write((unsigned short *)mac); + + return 0; +} + +U_BOOT_CMD( + setmac, 2, 1, do_set_mac, + "setmac - write MAC address for RTL8110SCL\n", + "\n" + "setmac <mac address> - write MAC address for RTL8110SCL\n" +); + +int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + if (argc != 1) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + mac_read(); + + return 0; +} + +U_BOOT_CMD( + printmac, 1, 1, do_print_mac, + "printmac - print MAC address for RTL8110\n", + "\n" + " - print MAC address for RTL8110\n" +); + diff --git a/board/sh7785lcr/selfcheck.c b/board/sh7785lcr/selfcheck.c new file mode 100644 index 0000000..9c228e5 --- /dev/null +++ b/board/sh7785lcr/selfcheck.c @@ -0,0 +1,173 @@ +/* + * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/pci.h> + +#if defined(CONFIG_CPU_32BIT) +#define NOCACHE_OFFSET 0x00000000 +#else +#define NOCACHE_OFFSET 0xa0000000 +#endif +#define PLD_LEDCR (0x04000008 + NOCACHE_OFFSET) +#define PLD_SWSR (0x0400000a + NOCACHE_OFFSET) +#define PLD_VERSR (0x0400000c + NOCACHE_OFFSET) + +#define SM107_DEVICEID (0x13e00060 + NOCACHE_OFFSET) + +static void wait_ms(unsigned long time) +{ + while (time--) + udelay(1000); +} + +static void test_pld(void) +{ + printf("PLD version = %04x\n", readb(PLD_VERSR)); +} + +static void test_sm107(void) +{ + printf("SM107 device ID = %04x\n", readl(SM107_DEVICEID)); +} + +static void test_led(void) +{ + printf("turn on LEDs 3, 5, 7, 9\n"); + writeb(0x55, PLD_LEDCR); + wait_ms(2000); + printf("turn on LEDs 4, 6, 8, 10\n"); + writeb(0xaa, PLD_LEDCR); + wait_ms(2000); + writeb(0x00, PLD_LEDCR); +} + +static void test_dipsw(void) +{ + printf("Please DIPSW set = B'0101\n"); + while (readb(PLD_SWSR) != 0x05) { + if (ctrlc()) + return; + } + printf("Please DIPSW set = B'1010\n"); + while (readb(PLD_SWSR) != 0x0A) { + if (ctrlc()) + return; + } + printf("DIPSW OK\n"); +} + +static void test_net(void) +{ + unsigned long data; + + writel(0x80000000, 0xfe0401c0); + data = readl(0xfe040220); + if (data == 0x816910ec) + printf("Ethernet OK\n"); + else + printf("Ethernet NG, data = %08x\n", data); +} + +static void test_sata(void) +{ + unsigned long data; + + writel(0x80000800, 0xfe0401c0); + data = readl(0xfe040220); + if (data == 0x35121095) + printf("SATA OK\n"); + else + printf("SATA NG, data = %08x\n", data); +} + +static void test_pci(void) +{ + writel(0x80001800, 0xfe0401c0); + printf("PCI CN1 ID = %08x\n", readl(0xfe040220)); + + writel(0x80001000, 0xfe0401c0); + printf("PCI CN2 ID = %08x\n", readl(0xfe040220)); +} + +int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + char *cmd; + + if (argc != 2) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + cmd = argv[1]; + switch (cmd[0]) { + case 'a': /* all */ + test_pld(); + test_led(); + test_dipsw(); + test_sm107(); + test_net(); + test_sata(); + test_pci(); + break; + case 'p': /* pld or pci */ + if (cmd[1] == 'l') + test_pld(); + else + test_pci(); + break; + case 'l': /* led */ + test_led(); + break; + case 'd': /* dipsw */ + test_dipsw(); + break; + case 's': /* sm107 or sata */ + if (cmd[1] == 'm') + test_sm107(); + else + test_sata(); + break; + case 'n': /* net */ + test_net(); + break; + default: + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + return 0; +} + +U_BOOT_CMD( + hwtest, 2, 1, do_hw_test, + "hwtest - hardware test for R0P7785LC0011RL board\n", + "\n" + "hwtest all - test all hardware\n" + "hwtest pld - output PLD version\n" + "hwtest led - turn on LEDs\n" + "hwtest dipsw - test DIP switch\n" + "hwtest sm107 - output SM107 version\n" + "hwtest net - check RTL8110 ID\n" + "hwtest sata - check SiI3512 ID\n" + "hwtest pci - output PCI slot device ID\n" +); + diff --git a/board/sh7785lcr/sh7785lcr.c b/board/sh7785lcr/sh7785lcr.c new file mode 100644 index 0000000..5b9c403 --- /dev/null +++ b/board/sh7785lcr/sh7785lcr.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/pci.h> + +int checkboard(void) +{ + puts("BOARD: Renesas Technology Corp. R0P7785LC0011RL\n"); + return 0; +} + +int board_init(void) +{ + return 0; +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +static struct pci_controller hose; +void pci_init_board(void) +{ + pci_sh7780_init(&hose); +} + diff --git a/board/sh7785lcr/u-boot.lds b/board/sh7785lcr/u-boot.lds new file mode 100644 index 0000000..f0109eb --- /dev/null +++ b/board/sh7785lcr/u-boot.lds @@ -0,0 +1,97 @@ +/* + * Copyrigth (c) 2007 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyrigth (c) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + . = 0x08000000 + (128 * 1024 * 1024) - (512 * 1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh4/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + /* _reloc_dst_end = .; */ + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} + diff --git a/cpu/mcf5227x/speed.c b/cpu/mcf5227x/speed.c index 78c946f..0baf9bc 100644 --- a/cpu/mcf5227x/speed.c +++ b/cpu/mcf5227x/speed.c @@ -116,5 +116,9 @@ int get_clocks(void) gd->bus_clk = gd->flb_clk; } +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#endif + return (0); } diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c index 55c9cd3..8ab5b8e 100644 --- a/cpu/mcf523x/cpu_init.c +++ b/cpu/mcf523x/cpu_init.c @@ -110,8 +110,8 @@ void cpu_init_f(void) #endif #ifdef CONFIG_FSL_I2C - gpio->par_feci2c &= ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK); - gpio->par_feci2c |= (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA); + CFG_I2C_PINMUX_REG &= CFG_I2C_PINMUX_CLR; + CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET; #endif icache_enable(); diff --git a/cpu/mcf523x/speed.c b/cpu/mcf523x/speed.c index 247d318..1bda2d4 100644 --- a/cpu/mcf523x/speed.c +++ b/cpu/mcf523x/speed.c @@ -45,5 +45,9 @@ int get_clocks(void) gd->bus_clk = CFG_CLK; gd->cpu_clk = (gd->bus_clk * 2); +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#endif + return (0); } diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 3cacb55..68aefe9 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -80,6 +80,15 @@ void cpu_init_f(void) mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0); mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0); +#ifdef CONFIG_FSL_I2C + CFG_I2C_PINMUX_REG = CFG_I2C_PINMUX_REG & CFG_I2C_PINMUX_CLR; + CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET; +#ifdef CFG_I2C2_OFFSET + CFG_I2C2_PINMUX_REG &= CFG_I2C2_PINMUX_CLR; + CFG_I2C2_PINMUX_REG |= CFG_I2C2_PINMUX_SET; +#endif +#endif + /* enable instruction cache now */ icache_enable(); } @@ -322,7 +331,8 @@ void cpu_init_f(void) #endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ #ifdef CONFIG_FSL_I2C - gpio_reg->par_feci2c = 0x000F; + CFG_I2C_PINMUX_REG &= CFG_I2C_PINMUX_CLR; + CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET; #endif /* enable instruction cache now */ diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c index f6edd5b..4cb8f93 100644 --- a/cpu/mcf52x2/speed.c +++ b/cpu/mcf52x2/speed.c @@ -82,5 +82,13 @@ int get_clocks (void) #else gd->bus_clk = gd->cpu_clk; #endif + +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#ifdef CFG_I2C2_OFFSET + gd->i2c2_clk = gd->bus_clk; +#endif +#endif + return (0); } diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c index 001b9f4..a11e425 100644 --- a/cpu/mcf532x/speed.c +++ b/cpu/mcf532x/speed.c @@ -212,5 +212,10 @@ int get_clocks(void) { gd->bus_clk = clock_pll(CFG_CLK / 1000, 0) * 1000; gd->cpu_clk = (gd->bus_clk * 3); + +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#endif + return (0); } diff --git a/cpu/mcf5445x/speed.c b/cpu/mcf5445x/speed.c index f677f3c..6711a1d 100644 --- a/cpu/mcf5445x/speed.c +++ b/cpu/mcf5445x/speed.c @@ -209,5 +209,9 @@ int get_clocks(void) #endif } +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#endif + return (0); } diff --git a/cpu/mcf547x_8x/speed.c b/cpu/mcf547x_8x/speed.c index 389e7c9..28fe657 100644 --- a/cpu/mcf547x_8x/speed.c +++ b/cpu/mcf547x_8x/speed.c @@ -39,5 +39,10 @@ int get_clocks(void) gd->bus_clk = CFG_CLK; gd->cpu_clk = (gd->bus_clk * 2); + +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#endif + return (0); } diff --git a/cpu/mpc512x/Makefile b/cpu/mpc512x/Makefile index 8ba8ae8..e8f1060 100644 --- a/cpu/mpc512x/Makefile +++ b/cpu/mpc512x/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o iopin.o +COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o i2c.o iopin.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile index 312b0bf..06fdbcf 100644 --- a/cpu/mpc5xxx/Makefile +++ b/cpu/mpc5xxx/Makefile @@ -27,7 +27,7 @@ LIB = $(obj)lib$(CPU).a START = start.o SOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o -COBJS = i2c.o traps.o cpu.o cpu_init.o fec.o ide.o interrupts.o \ +COBJS = i2c.o traps.o cpu.o cpu_init.o ide.o interrupts.o \ loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/cpu/sh2/Makefile b/cpu/sh2/Makefile new file mode 100644 index 0000000..50f6720 --- /dev/null +++ b/cpu/sh2/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# Copyright (C) 2008 Renesas Solutions Corp. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).a + +START = start.o +OBJS = cpu.o interrupts.o watchdog.o time.o # cache.o + +all: .depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/sh2/cache.c b/cpu/sh2/cache.c new file mode 100644 index 0000000..b5c47cf --- /dev/null +++ b/cpu/sh2/cache.c @@ -0,0 +1,112 @@ +/* + * (C) Copyright 2007 + * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * Copyright (C) 2007, 2008 Nobobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <asm/processor.h> +#include <asm/io.h> + +/* + * Jump to P2 area. + * When handling TLB or caches, we need to do it from P2 area. + */ +#define jump_to_P2() \ +do { \ + unsigned long __dummy; \ + __asm__ __volatile__( \ + "mov.l 1f, %0\n\t" \ + "or %1, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1: .long 2f\n" \ + "2:" \ + : "=&r" (__dummy) \ + : "r" (0x20000000)); \ +} while (0) + +/* + * Back to P1 area. + */ +#define back_to_P1() \ +do { \ + unsigned long __dummy; \ + __asm__ __volatile__( \ + "nop;nop;nop;nop;nop;nop;nop\n\t" \ + "mov.l 1f, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1: .long 2f\n" \ + "2:" \ + : "=&r" (__dummy)); \ +} while (0) + +#define CACHE_VALID 1 +#define CACHE_UPDATED 2 + +static inline void cache_wback_all(void) +{ + unsigned long addr, data, i, j; + + jump_to_P2(); + for (i = 0; i < CACHE_OC_NUM_ENTRIES; i++) { + for (j = 0; j < CACHE_OC_NUM_WAYS; j++) { + addr = CACHE_OC_ADDRESS_ARRAY + | (j << CACHE_OC_WAY_SHIFT) + | (i << CACHE_OC_ENTRY_SHIFT); + data = inl(addr); + if (data & CACHE_UPDATED) { + data &= ~CACHE_UPDATED; + outl(data, addr); + } + } + } + back_to_P1(); +} + + +#define CACHE_ENABLE 0 +#define CACHE_DISABLE 1 + +int cache_control(unsigned int cmd) +{ + unsigned long ccr; + + jump_to_P2(); + ccr = inl(CCR); + + if (ccr & CCR_CACHE_ENABLE) + cache_wback_all(); + + if (cmd == CACHE_DISABLE) + outl(CCR_CACHE_STOP, CCR); + else + outl(CCR_CACHE_INIT, CCR); + back_to_P1(); + + return 0; +} diff --git a/cpu/sh2/config.mk b/cpu/sh2/config.mk new file mode 100644 index 0000000..52d5a0f --- /dev/null +++ b/cpu/sh2/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2007-2008 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +PLATFORM_CPPFLAGS += -m3e -mb +PLATFORM_RELFLAGS += -ffixed-r13 +PLATFORM_LDFLAGS += -EB diff --git a/cpu/sh2/cpu.c b/cpu/sh2/cpu.c new file mode 100644 index 0000000..e0cb047 --- /dev/null +++ b/cpu/sh2/cpu.c @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <asm/processor.h> +#include <asm/io.h> + +#define STBCR4 0xFFFE040C +#define cmt_clock_enable() do {\ + writeb(readb(STBCR4) & ~0x04, STBCR4);\ + } while (0) +#define scif0_enable() do {\ + writeb(readb(STBCR4) & ~0x80, STBCR4);\ + } while (0) + +int checkcpu(void) +{ +#if defined(CONFIG_SH2A) + puts("CPU: SH2A\n"); +#else + puts("CPU: SH2\n"); +#endif + return 0; +} + +int cpu_init(void) +{ + /* SCIF enable */ + scif0_enable(); + /* CMT clock enable */ + cmt_clock_enable() ; + return 0; +} + +int cleanup_before_linux(void) +{ + disable_interrupts(); + return 0; +} + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + disable_interrupts(); + reset_cpu(0); + return 0; +} + +void flush_cache(unsigned long addr, unsigned long size) +{ + +} + +void icache_enable(void) +{ +} + +void icache_disable(void) +{ +} + +int icache_status(void) +{ + return 0; +} + +void dcache_enable(void) +{ +} + +void dcache_disable(void) +{ +} + +int dcache_status(void) +{ + return 0; +} diff --git a/cpu/sh2/interrupts.c b/cpu/sh2/interrupts.c new file mode 100644 index 0000000..fe6ff3a --- /dev/null +++ b/cpu/sh2/interrupts.c @@ -0,0 +1,39 @@ +/* + * Copyright 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +int interrupt_init(void) +{ + return 0; +} + +void enable_interrupts(void) +{ + +} + +int disable_interrupts(void) +{ + return 0; +} diff --git a/cpu/sh2/start.S b/cpu/sh2/start.S new file mode 100644 index 0000000..c4fa688 --- /dev/null +++ b/cpu/sh2/start.S @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Renesas Solutions Corp. + + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> + + .text + .align 2 + + .global _start +_start: + .long 0x00000010 /* Ppower ON reset PC*/ + .long 0x00000000 + .long 0x00000010 /* Manual reset PC */ + .long 0x00000000 +_init: + mov.l ._lowlevel_init, r0 +100: bsrf r0 + nop + bsr 1f + nop +1: sts pr, r5 + mov.l ._reloc_dst, r4 + add #(_start-1b), r5 + mov.l ._reloc_dst_end, r6 + +2: mov.l @r5+, r1 + mov.l r1, @r4 + add #4, r4 + cmp/hs r6, r4 + bf 2b + + mov.l ._bss_start, r4 + mov.l ._bss_end, r5 + mov #0, r1 + +3: mov.l r1, @r4 /* bss clear */ + add #4, r4 + cmp/hs r5, r4 + bf 3b + + mov.l ._gd_init, r13 /* global data */ + mov.l ._stack_init, r15 /* stack */ + + mov.l ._sh_generic_init, r0 + jsr @r0 + nop + +loop: + bra loop + + .align 2 + +._lowlevel_init: .long (lowlevel_init - (100b + 4)) +._reloc_dst: .long reloc_dst +._reloc_dst_end: .long reloc_dst_end +._bss_start: .long bss_start +._bss_end: .long bss_end +._gd_init: .long (_start - CFG_GBL_DATA_SIZE) +._stack_init: .long (_start - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN - 16) +._sh_generic_init: .long sh_generic_init diff --git a/cpu/sh2/time.c b/cpu/sh2/time.c new file mode 100644 index 0000000..d6eb0cb --- /dev/null +++ b/cpu/sh2/time.c @@ -0,0 +1,111 @@ +/* + * Copyright (C) 2007,2008 Nobobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Renesas Solutions Corp. + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> + +#define CMT_CMCSR_INIT 0x0001 /* PCLK/32 */ +#define CMT_CMCSR_CALIB 0x0000 +#define CMT_MAX_COUNTER (0xFFFFFFFF) +#define CMT_TIMER_RESET (0xFFFF) + +static vu_long cmt0_timer; + +static void cmt_timer_start(unsigned int timer) +{ + writew(readw(CMSTR) | 0x01, CMSTR); +} + +static void cmt_timer_stop(unsigned int timer) +{ + writew(readw(CMSTR) & ~0x01, CMSTR); +} + +int timer_init(void) +{ + cmt0_timer = 0; + /* Divide clock by 32 */ + readw(CMCSR_0); + writew(CMT_CMCSR_INIT, CMCSR_0); + + /* User Device 0 only */ + cmt_timer_stop(0); + set_timer(CMT_TIMER_RESET); + cmt_timer_start(0); + + return 0; +} + +unsigned long long get_ticks(void) +{ + return cmt0_timer; +} + +static vu_long cmcnt; +ulong get_timer(ulong base) +{ + ulong data = readw(CMCNT_0); + + if (data >= cmcnt) + cmcnt = data - cmcnt; + else + cmcnt = (CMT_TIMER_RESET - cmcnt) + data; + + if ((cmt0_timer + cmcnt) > CMT_MAX_COUNTER) + cmt0_timer = ((cmt0_timer + cmcnt) - CMT_MAX_COUNTER); + else + cmt0_timer += cmcnt; + + cmcnt = data; + return cmt0_timer - base; +} + +void set_timer(ulong t) +{ + writew((u16) t, CMCOR_0); +} + +void reset_timer(void) +{ + cmt_timer_stop(0); + set_timer(CMT_TIMER_RESET); + cmt0_timer = 0; + cmt_timer_start(0); +} + +void udelay(unsigned long usec) +{ + unsigned int start = get_timer(0); + + while (get_timer((ulong) start) < (usec * (CFG_HZ / 1000000))) + continue; +} + +unsigned long get_tbclk(void) +{ + return CFG_HZ; +} diff --git a/cpu/sh2/watchdog.c b/cpu/sh2/watchdog.c new file mode 100644 index 0000000..de0254b --- /dev/null +++ b/cpu/sh2/watchdog.c @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhoro@renesas.com> + * Copyright (C) 2008 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> + +int watchdog_init(void) +{ + return 0; +} + +void reset_cpu(unsigned long ignored) +{ + while (1) + ; +} diff --git a/doc/README.sh7785lcr b/doc/README.sh7785lcr new file mode 100644 index 0000000..0770276 --- /dev/null +++ b/doc/README.sh7785lcr @@ -0,0 +1,83 @@ +======================================== +Renesas Technology R0P7785LC0011RL board +======================================== + +This board specification: +========================= + +The R0P7785LC0011RL(board config name:sh7785lcr) has the following device: + + - SH7785 (SH-4A) + - DDR2-SDRAM 512MB + - NOR Flash 64MB + - 2D Graphic controller + - SATA controller + - Ethernet controller + - USB host/peripheral controller + - SD controller + - I2C controller + - RTC + +This board has 2 physical memory maps. It can be changed with DIP switch(S2-5). + + phys address | S2-5 = OFF | S2-5 = ON + -------------------------------+---------------+--------------- + 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash + 0x04000000 - 0x05ffffff(CS1) | PLD | PLD + 0x06000000 - 0x07ffffff(CS1) | reserved | I2C + 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM + 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM + 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 + 0x14000000 - 0x17ffffff(CS5) | I2C | USB + 0x18000000 - 0x1bffffff(CS6) | reserved | SD + 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) + + +This board specific command: +============================ + +This board has the following its specific command: + + - hwtest + - printmac + - setmac + + +1. hwtest + +This is self-check command. This command has the following options: + + - all : test all hardware + - pld : output PLD version + - led : turn on LEDs + - dipsw : test DIP switch + - sm107 : output SM107 version + - net : check RTL8110 ID + - sata : check SiI3512 ID + - net : output PCI slot device ID + +i.e) +=> hwtest led +turn on LEDs 3, 5, 7, 9 +turn on LEDs 4, 6, 8, 10 + +=> hwtest net +Ethernet OK + + +2. printmac + +This command outputs MAC address of this board. + +i.e) +=> printmac +MAC = 00:00:87:**:**:** + + +3. setmac + +This command writes MAC address of this board. + +i.e) +=> setmac 00:00:87:**:**:** + diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index b7b3a75..264553d 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -76,12 +76,20 @@ static const struct fsl_i2c *i2c_dev[2] = { * For this table, the values are based on a value of 1 for the DFSR * register. See the application note AN2919 "Determining the I2C Frequency * Divider Ratio for SCL" + * + * ColdFire I2C frequency dividers for FDR values are different from + * PowerPC. The protocol to use the I2C module is still the same. + * A different table is defined and are based on MCF5xxx user manual. + * */ static const struct { unsigned short divider; +#ifdef __PPC__ u8 dfsr; +#endif u8 fdr; } fsl_i2c_speed_map[] = { +#ifdef __PPC__ {160, 1, 32}, {192, 1, 33}, {224, 1, 34}, {256, 1, 35}, {288, 1, 0}, {320, 1, 1}, {352, 6, 1}, {384, 1, 2}, {416, 6, 2}, {448, 1, 38}, {480, 1, 3}, {512, 1, 39}, {544, 11, 3}, {576, 1, 4}, @@ -98,6 +106,25 @@ static const struct { {20480, 1, 25}, {24576, 1, 26}, {28672, 1, 62}, {30720, 1, 27}, {32768, 1, 63}, {36864, 1, 28}, {40960, 1, 29}, {49152, 1, 30}, {61440, 1, 31}, {-1, 1, 31} +#elif defined(__M68K__) + {20, 32}, {22, 33}, {24, 34}, {26, 35}, + {28, 0}, {28, 36}, {30, 1}, {32, 37}, + {34, 2}, {36, 38}, {40, 3}, {40, 39}, + {44, 4}, {48, 5}, {48, 40}, {56, 6}, + {56, 41}, {64, 42}, {68, 7}, {72, 43}, + {80, 8}, {80, 44}, {88, 9}, {96, 41}, + {104, 10}, {112, 42}, {128, 11}, {128, 43}, + {144, 12}, {160, 13}, {160, 48}, {192, 14}, + {192, 49}, {224, 50}, {240, 15}, {256, 51}, + {288, 16}, {320, 17}, {320, 52}, {384, 18}, + {384, 53}, {448, 54}, {480, 19}, {512, 55}, + {576, 20}, {640, 21}, {640, 56}, {768, 22}, + {768, 57}, {960, 23}, {896, 58}, {1024, 59}, + {1152, 24}, {1280, 25}, {1280, 60}, {1536, 26}, + {1536, 61}, {1792, 62}, {1920, 27}, {2048, 63}, + {2304, 28}, {2560, 29}, {3072, 30}, {3840, 31}, + {-1, 31} +#endif }; /** @@ -126,12 +153,17 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev, for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++) if (fsl_i2c_speed_map[i].divider >= divider) { - u8 fdr, dfsr; + u8 fdr; +#ifdef __PPC__ + u8 dfsr; dfsr = fsl_i2c_speed_map[i].dfsr; +#endif fdr = fsl_i2c_speed_map[i].fdr; speed = i2c_clk / fsl_i2c_speed_map[i].divider; writeb(fdr, &dev->fdr); /* set bus speed */ +#ifdef __PPC__ writeb(dfsr, &dev->dfsrr); /* set default filter */ +#endif break; } diff --git a/drivers/net/Makefile b/drivers/net/Makefile index bcf31cb..a084000 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -41,6 +41,8 @@ COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o COBJS-$(CONFIG_DRIVER_LAN91C96) += lan91c96.o COBJS-$(CONFIG_MACB) += macb.o COBJS-$(CONFIG_MCFFEC) += mcffec.o +COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o +COBJS-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o COBJS-$(CONFIG_NATSEMI) += natsemi.o ifeq ($(CONFIG_DRIVER_NE2000),y) COBJS-y += ne2000.o diff --git a/cpu/mpc512x/fec.c b/drivers/net/mpc512x_fec.c index e9df7de..7caeeda 100644 --- a/cpu/mpc512x/fec.c +++ b/drivers/net/mpc512x_fec.c @@ -11,7 +11,7 @@ #include <malloc.h> #include <net.h> #include <miiphy.h> -#include "fec.h" +#include "mpc512x_fec.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/cpu/mpc512x/fec.h b/drivers/net/mpc512x_fec.h index 9c38502..9c38502 100644 --- a/cpu/mpc512x/fec.h +++ b/drivers/net/mpc512x_fec.h diff --git a/cpu/mpc5xxx/fec.c b/drivers/net/mpc5xxx_fec.c index bf804ee..3d3eb8b 100644 --- a/cpu/mpc5xxx/fec.c +++ b/drivers/net/mpc5xxx_fec.c @@ -8,11 +8,11 @@ #include <common.h> #include <mpc5xxx.h> +#include <mpc5xxx_sdma.h> #include <malloc.h> #include <net.h> #include <miiphy.h> -#include "sdma.h" -#include "fec.h" +#include "mpc5xxx_fec.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/cpu/mpc5xxx/fec.h b/drivers/net/mpc5xxx_fec.h index 81756a5..16c3e8e 100644 --- a/cpu/mpc5xxx/fec.h +++ b/drivers/net/mpc5xxx_fec.h @@ -11,10 +11,6 @@ #ifndef __MPC5XXX_FEC_H #define __MPC5XXX_FEC_H -#include <common.h> -#include <mpc5xxx.h> -#include "sdma.h" - typedef unsigned long uint32; typedef unsigned short uint16; typedef unsigned char uint8; diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 2b9eeed..61c2b82 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -20,14 +20,20 @@ #include <common.h> #include <asm/processor.h> -#if defined (CONFIG_CONS_SCIF0) -#define SCIF_BASE SCIF0_BASE -#elif defined (CONFIG_CONS_SCIF1) -#define SCIF_BASE SCIF1_BASE -#elif defined (CONFIG_CONS_SCIF2) -#define SCIF_BASE SCIF2_BASE +#if defined(CONFIG_CONS_SCIF0) +# define SCIF_BASE SCIF0_BASE +#elif defined(CONFIG_CONS_SCIF1) +# define SCIF_BASE SCIF1_BASE +#elif defined(CONFIG_CONS_SCIF2) +# define SCIF_BASE SCIF2_BASE +#elif defined(CONFIG_CONS_SCIF3) +# define SCIF_BASE SCIF3_BASE +#elif defined(CONFIG_CONS_SCIF4) +# define SCIF_BASE SCIF4_BASE +#elif defined(CONFIG_CONS_SCIF5) +# define SCIF_BASE SCIF5_BASE #else -#error "Default SCIF doesn't set....." +# error "Default SCIF doesn't set....." #endif /* Base register */ @@ -36,7 +42,8 @@ #define SCSCR (vu_short *)(SCIF_BASE + 0x8) #define SCFCR (vu_short *)(SCIF_BASE + 0x18) #define SCFDR (vu_short *)(SCIF_BASE + 0x1C) -#ifdef CONFIG_CPU_SH7720 /* SH7720 specific */ +#if defined(CONFIG_CPU_SH7720) || \ + (defined(CONFIG_CPU_SH7723) && defined(CONFIG_SCIF_A)) # define SCFSR (vu_short *)(SCIF_BASE + 0x14) /* SCSSR */ # define SCFTDR (vu_char *)(SCIF_BASE + 0x20) # define SCFRDR (vu_char *)(SCIF_BASE + 0x24) @@ -55,7 +62,7 @@ # define LSR_ORER 1 # define FIFOLEVEL_MASK 0xFF #elif defined(CONFIG_CPU_SH7763) -# if defined (CONFIG_CONS_SCIF2) +# if defined(CONFIG_CONS_SCIF2) # define SCSPTR (vu_short *)(SCIF_BASE + 0x20) # define SCLSR (vu_short *)(SCIF_BASE + 0x24) # define LSR_ORER 1 @@ -68,9 +75,20 @@ # define LSR_ORER 1 # define FIFOLEVEL_MASK 0xFF # endif +#elif defined(CONFIG_CPU_SH7723) +# if defined(CONIFG_SCIF_A) +# define SCLSR SCFSR +# define LSR_ORER 0x0200 +# define FIFOLEVEL_MASK 0x3F +#else +# define SCLSR (vu_short *)(SCIF_BASE + 0x24) +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0x1F +#endif #elif defined(CONFIG_CPU_SH7750) || \ defined(CONFIG_CPU_SH7751) || \ - defined(CONFIG_CPU_SH7722) + defined(CONFIG_CPU_SH7722) || \ + defined(CONFIG_CPU_SH7203) # define SCSPTR (vu_short *)(SCIF_BASE + 0x20) # define SCLSR (vu_short *)(SCIF_BASE + 0x24) # define LSR_ORER 1 @@ -89,6 +107,9 @@ /* SCBRR register value setting */ #if defined(CONFIG_CPU_SH7720) # define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) +#elif defined(CONFIG_CPU_SH7723) && defined(CONFIG_SCIF_A) +/* SH7723 SCIFA use bus clock. So clock *2 */ +# define SCBRR_VALUE(bps, clk) (((clk*2*2)+16*bps)/(32*bps)-1) #else /* Generic SuperH */ # define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) #endif @@ -167,7 +188,7 @@ void serial_puts(const char *s) int serial_tstc(void) { - return serial_rx_fifo_level()? 1 : 0; + return serial_rx_fifo_level() ? 1 : 0; } #define FSR_ERR_CLEAR 0x0063 @@ -191,14 +212,16 @@ int serial_getc_check(void) handle_error(); if (*SCLSR & LSR_ORER) handle_error(); - return (status & (FSR_DR | FSR_RDF)); + return status & (FSR_DR | FSR_RDF); } int serial_getc(void) { unsigned short status; char ch; - while (!serial_getc_check()) ; + + while (!serial_getc_check()) + ; ch = *SCFRDR; status = *SCFSR; diff --git a/examples/Makefile b/examples/Makefile index 66b354d..b0a8853 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -67,6 +67,9 @@ endif ifeq ($(ARCH),sh) LOAD_ADDR = 0x8C000000 +ifeq ($(CPU),sh2) +BIG_ENDIAN=y +endif endif ifeq ($(ARCH),sparc) diff --git a/include/asm-m68k/fsl_i2c.h b/include/asm-m68k/fsl_i2c.h index 4f71341..2bc9bf4 100644 --- a/include/asm-m68k/fsl_i2c.h +++ b/include/asm-m68k/fsl_i2c.h @@ -72,15 +72,6 @@ typedef struct fsl_i2c { #define I2C_DR 0xFF #define I2C_DR_SHIFT 0 #define I2C_DR_RES ~(I2C_DR) - - u8 dfsrr; /* I2C digital filter sampling rate register */ - u8 res5[3]; -#define I2C_DFSRR 0x3F -#define I2C_DFSRR_SHIFT 0 -#define I2C_DFSRR_RES ~(I2C_DR) - - /* Fill out the reserved block */ - u8 res6[0xE8]; } fsl_i2c_t; #endif /* _ASM_I2C_H_ */ diff --git a/include/asm-sh/cpu_sh2.h b/include/asm-sh/cpu_sh2.h new file mode 100644 index 0000000..8bc9bc6 --- /dev/null +++ b/include/asm-sh/cpu_sh2.h @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_CPU_SH2_H_ +#define _ASM_CPU_SH2_H_ + +/* cache control */ +#define CCR_CACHE_STOP 0x00000008 +#define CCR_CACHE_ENABLE 0x00000005 +#define CCR_CACHE_ICI 0x00000008 + +#define CACHE_OC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_OC_WAY_SHIFT 13 +#define CACHE_OC_NUM_ENTRIES 256 +#define CACHE_OC_ENTRY_SHIFT 4 + +#if defined(CONFIG_CPU_SH7203) +# include <asm/cpu_sh7203.h> +#else +# error "Unknown SH2 variant" +#endif + +#endif /* _ASM_CPU_SH2_H_ */ diff --git a/include/asm-sh/cpu_sh4.h b/include/asm-sh/cpu_sh4.h index 5a8a5a1..b6cc6cf 100644 --- a/include/asm-sh/cpu_sh4.h +++ b/include/asm-sh/cpu_sh4.h @@ -35,10 +35,14 @@ # include <asm/cpu_sh7750.h> #elif defined (CONFIG_CPU_SH7722) # include <asm/cpu_sh7722.h> +#elif defined (CONFIG_CPU_SH7723) +# include <asm/cpu_sh7723.h> #elif defined (CONFIG_CPU_SH7763) # include <asm/cpu_sh7763.h> #elif defined (CONFIG_CPU_SH7780) # include <asm/cpu_sh7780.h> +#elif defined (CONFIG_CPU_SH7785) +# include <asm/cpu_sh7785.h> #else # error "Unknown SH4 variant" #endif diff --git a/include/asm-sh/cpu_sh7203.h b/include/asm-sh/cpu_sh7203.h new file mode 100644 index 0000000..77dcac4 --- /dev/null +++ b/include/asm-sh/cpu_sh7203.h @@ -0,0 +1,41 @@ +#ifndef _ASM_CPU_SH7203_H_ +#define _ASM_CPU_SH7203_H_ + +/* Cache */ +#define CCR1 0xFFFC1000 +#define CCR CCR1 + +/* PFC */ +#define PACR 0xA4050100 +#define PBCR 0xA4050102 +#define PCCR 0xA4050104 +#define PETCR 0xA4050106 + +/* Port Data Registers */ +#define PADR 0xA4050120 +#define PBDR 0xA4050122 +#define PCDR 0xA4050124 + +/* BSC */ + +/* SDRAM controller */ + +/* SCIF */ +#define SCSMR_0 0xFFFE8000 +#define SCIF0_BASE SCSMR_0 + +/* Timer(CMT) */ +#define CMSTR 0xFFFEC000 +#define CMCSR_0 0xFFFEC002 +#define CMCNT_0 0xFFFEC004 +#define CMCOR_0 0xFFFEC006 +#define CMCSR_1 0xFFFEC008 +#define CMCNT_1 0xFFFEC00A +#define CMCOR_1 0xFFFEC00C + +/* On chip oscillator circuits */ +#define FRQCR 0xA415FF80 +#define WTCNT 0xA415FF84 +#define WTCSR 0xA415FF86 + +#endif /* _ASM_CPU_SH7203_H_ */ diff --git a/include/asm-sh/cpu_sh7723.h b/include/asm-sh/cpu_sh7723.h new file mode 100644 index 0000000..6dac6e9 --- /dev/null +++ b/include/asm-sh/cpu_sh7723.h @@ -0,0 +1,209 @@ +/* + * (C) Copyright 2008 Renesas Solutions Corp. + * + * SH7723 Internal I/O register + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_CPU_SH7723_H_ +#define _ASM_CPU_SH7723_H_ + +#define CACHE_OC_NUM_WAYS 4 +#define CCR_CACHE_INIT 0x0000090d + +/* EXP */ +#define TRA 0xFF000020 +#define EXPEVT 0xFF000024 +#define INTEVT 0xFF000028 + +/* MMU */ +#define PTEH 0xFF000000 +#define PTEL 0xFF000004 +#define TTB 0xFF000008 +#define TEA 0xFF00000C +#define MMUCR 0xFF000010 +#define PASCR 0xFF000070 +#define IRMCR 0xFF000078 + +/* CACHE */ +#define CCR 0xFF00001C +#define RAMCR 0xFF000074 + +/* INTC */ + +/* BSC */ +#define CMNCR 0xFEC10000 +#define CS0BCR 0xFEC10004 +#define CS2BCR 0xFEC10008 +#define CS4BCR 0xFEC10010 +#define CS5ABCR 0xFEC10014 +#define CS5BBCR 0xFEC10018 +#define CS6ABCR 0xFEC1001C +#define CS6BBCR 0xFEC10020 +#define CS0WCR 0xFEC10024 +#define CS2WCR 0xFEC10028 +#define CS4WCR 0xFEC10030 +#define CS5AWCR 0xFEC10034 +#define CS5BWCR 0xFEC10038 +#define CS6AWCR 0xFEC1003C +#define CS6BWCR 0xFEC10040 +#define RBWTCNT 0xFEC10054 + +/* SBSC */ +#define SBSC_SDCR 0xFE400008 +#define SBSC_SDWCR 0xFE40000C +#define SBSC_SDPCR 0xFE400010 +#define SBSC_RTCSR 0xFE400014 +#define SBSC_RTCNT 0xFE400018 +#define SBSC_RTCOR 0xFE40001C +#define SBSC_RFCR 0xFE400020 + +/* DMAC */ + +/* CPG */ +#define FRQCR 0xA4150000 +#define VCLKCR 0xA4150004 +#define SCLKACR 0xA4150008 +#define SCLKBCR 0xA415000C +#define IRDACLKCR 0xA4150018 +#define PLLCR 0xA4150024 +#define DLLFRQ 0xA4150050 + +/* LOW POWER MODE */ +#define STBCR 0xA4150020 +#define MSTPCR0 0xA4150030 +#define MSTPCR1 0xA4150034 +#define MSTPCR2 0xA4150038 + +/* RWDT */ +#define RWTCNT 0xA4520000 +#define RWTCSR 0xA4520004 +#define WTCNT RWTCNT + +/* TMU */ +#define TSTR 0xFFD80004 +#define TCOR0 0xFFD80008 +#define TCNT0 0xFFD8000C +#define TCR0 0xFFD80010 +#define TCOR1 0xFFD80014 +#define TCNT1 0xFFD80018 +#define TCR1 0xFFD8001C +#define TCOR2 0xFFD80020 +#define TCNT2 0xFFD80024 +#define TCR2 0xFFD80028 + +/* TPU */ + +/* CMT */ +#define CMSTR 0xA44A0000 +#define CMCSR 0xA44A0060 +#define CMCNT 0xA44A0064 +#define CMCOR 0xA44A0068 + +/* MSIOF */ + +/* SCIF */ +#define SCIF0_BASE 0xFFE00000 +#define SCIF1_BASE 0xFFE10000 +#define SCIF2_BASE 0xFFE20000 +#define SCIF3_BASE 0xa4e30000 +#define SCIF4_BASE 0xa4e40000 +#define SCIF5_BASE 0xa4e50000 + +/* RTC */ +/* IrDA */ +/* KEYSC */ +/* USB */ +/* IIC */ +/* FLCTL */ +/* VPU */ +/* VIO(CEU) */ +/* VIO(VEU) */ +/* VIO(BEU) */ +/* 2DG */ +/* LCDC */ +/* VOU */ +/* TSIF */ +/* SIU */ +/* ATAPI */ + +/* PFC */ +#define PACR 0xA4050100 +#define PBCR 0xA4050102 +#define PCCR 0xA4050104 +#define PDCR 0xA4050106 +#define PECR 0xA4050108 +#define PFCR 0xA405010A +#define PGCR 0xA405010C +#define PHCR 0xA405010E +#define PJCR 0xA4050110 +#define PKCR 0xA4050112 +#define PLCR 0xA4050114 +#define PMCR 0xA4050116 +#define PNCR 0xA4050118 +#define PQCR 0xA405011A +#define PRCR 0xA405011C +#define PSCR 0xA405011E +#define PTCR 0xA4050140 +#define PUCR 0xA4050142 +#define PVCR 0xA4050144 +#define PWCR 0xA4050146 +#define PXCR 0xA4050148 +#define PYCR 0xA405014A +#define PZCR 0xA405014C +#define PSELA 0xA405014E +#define PSELB 0xA4050150 +#define PSELC 0xA4050152 +#define PSELD 0xA4050154 +#define HIZCRA 0xA4050158 +#define HIZCRB 0xA405015A +#define HIZCRC 0xA405015C +#define HIZCRD 0xA405015E +#define MSELCRA 0xA4050180 +#define MSELCRB 0xA4050182 +#define PULCR 0xA4050184 +#define DRVCRA 0xA405018A +#define DRVCRB 0xA405018C + +/* I/O Port */ +#define PADR 0xA4050120 +#define PBDR 0xA4050122 +#define PCDR 0xA4050124 +#define PDDR 0xA4050126 +#define PEDR 0xA4050128 +#define PFDR 0xA405012A +#define PGDR 0xA405012C +#define PHDR 0xA405012E +#define PJDR 0xA4050130 +#define PKDR 0xA4050132 +#define PLDR 0xA4050134 +#define PMDR 0xA4050136 +#define PNDR 0xA4050138 +#define PQDR 0xA405013A +#define PRDR 0xA405013C +#define PSDR 0xA405013E +#define PTDR 0xA4050160 +#define PUDR 0xA4050162 +#define PVDR 0xA4050164 +#define PWDR 0xA4050166 +#define PYDR 0xA4050168 +#define PZDR 0xA405016A + +/* UBC */ +/* H-UDI */ + +#endif /* _ASM_CPU_SH7723_H_ */ diff --git a/include/asm-sh/cpu_sh7785.h b/include/asm-sh/cpu_sh7785.h new file mode 100644 index 0000000..4a4dfc9 --- /dev/null +++ b/include/asm-sh/cpu_sh7785.h @@ -0,0 +1,156 @@ +#ifndef _ASM_CPU_SH7785_H_ +#define _ASM_CPU_SH7785_H_ + +/* + * Copyright (c) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (c) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * Copyright (c) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#define CACHE_OC_NUM_WAYS 1 +#define CCR_CACHE_INIT 0x0000090b + +/* Exceptions */ +#define TRA 0xFF000020 +#define EXPEVT 0xFF000024 +#define INTEVT 0xFF000028 + +/* Cache Controller */ +#define CCR 0xFF00001C +#define QACR0 0xFF000038 +#define QACR1 0xFF00003C +#define RAMCR 0xFF000074 + +/* Watchdog Timer and Reset */ +#define WTCNT WDTCNT +#define WDTST 0xFFCC0000 +#define WDTCSR 0xFFCC0004 +#define WDTBST 0xFFCC0008 +#define WDTCNT 0xFFCC0010 +#define WDTBCNT 0xFFCC0018 + +/* Timer Unit */ +#define TSTR TSTR0 +#define TOCR 0xFFD80000 +#define TSTR0 0xFFD80004 +#define TCOR0 0xFFD80008 +#define TCNT0 0xFFD8000C +#define TCR0 0xFFD80010 +#define TCOR1 0xFFD80014 +#define TCNT1 0xFFD80018 +#define TCR1 0xFFD8001C +#define TCOR2 0xFFD80020 +#define TCNT2 0xFFD80024 +#define TCR2 0xFFD80028 +#define TCPR2 0xFFD8002C +#define TSTR1 0xFFDC0004 +#define TCOR3 0xFFDC0008 +#define TCNT3 0xFFDC000C +#define TCR3 0xFFDC0010 +#define TCOR4 0xFFDC0014 +#define TCNT4 0xFFDC0018 +#define TCR4 0xFFDC001C +#define TCOR5 0xFFDC0020 +#define TCNT5 0xFFDC0024 +#define TCR5 0xFFDC0028 + +/* Serial Communication Interface with FIFO */ +#define SCIF1_BASE 0xffeb0000 + +/* LBSC */ +#define MMSELR 0xfc400020 +#define LBSC_BASE 0xff800000 +#define BCR (LBSC_BASE + 0x1000) +#define CS0BCR (LBSC_BASE + 0x2000) +#define CS1BCR (LBSC_BASE + 0x2010) +#define CS2BCR (LBSC_BASE + 0x2020) +#define CS3BCR (LBSC_BASE + 0x2030) +#define CS4BCR (LBSC_BASE + 0x2040) +#define CS5BCR (LBSC_BASE + 0x2050) +#define CS6BCR (LBSC_BASE + 0x2060) +#define CS0WCR (LBSC_BASE + 0x2008) +#define CS1WCR (LBSC_BASE + 0x2018) +#define CS2WCR (LBSC_BASE + 0x2028) +#define CS3WCR (LBSC_BASE + 0x2038) +#define CS4WCR (LBSC_BASE + 0x2048) +#define CS5WCR (LBSC_BASE + 0x2058) +#define CS6WCR (LBSC_BASE + 0x2068) +#define CS5PCR (LBSC_BASE + 0x2070) +#define CS6PCR (LBSC_BASE + 0x2080) + +/* PCI Controller */ +#define SH7780_PCIECR 0xFE000008 +#define SH7780_PCIVID 0xFE040000 +#define SH7780_PCIDID 0xFE040002 +#define SH7780_PCICMD 0xFE040004 +#define SH7780_PCISTATUS 0xFE040006 +#define SH7780_PCIRID 0xFE040008 +#define SH7780_PCIPIF 0xFE040009 +#define SH7780_PCISUB 0xFE04000A +#define SH7780_PCIBCC 0xFE04000B +#define SH7780_PCICLS 0xFE04000C +#define SH7780_PCILTM 0xFE04000D +#define SH7780_PCIHDR 0xFE04000E +#define SH7780_PCIBIST 0xFE04000F +#define SH7780_PCIIBAR 0xFE040010 +#define SH7780_PCIMBAR0 0xFE040014 +#define SH7780_PCIMBAR1 0xFE040018 +#define SH7780_PCISVID 0xFE04002C +#define SH7780_PCISID 0xFE04002E +#define SH7780_PCICP 0xFE040034 +#define SH7780_PCIINTLINE 0xFE04003C +#define SH7780_PCIINTPIN 0xFE04003D +#define SH7780_PCIMINGNT 0xFE04003E +#define SH7780_PCIMAXLAT 0xFE04003F +#define SH7780_PCICID 0xFE040040 +#define SH7780_PCINIP 0xFE040041 +#define SH7780_PCIPMC 0xFE040042 +#define SH7780_PCIPMCSR 0xFE040044 +#define SH7780_PCIPMCSRBSE 0xFE040046 +#define SH7780_PCI_CDD 0xFE040047 +#define SH7780_PCICR 0xFE040100 +#define SH7780_PCILSR0 0xFE040104 +#define SH7780_PCILSR1 0xFE040108 +#define SH7780_PCILAR0 0xFE04010C +#define SH7780_PCILAR1 0xFE040110 +#define SH7780_PCIIR 0xFE040114 +#define SH7780_PCIIMR 0xFE040118 +#define SH7780_PCIAIR 0xFE04011C +#define SH7780_PCICIR 0xFE040120 +#define SH7780_PCIAINT 0xFE040130 +#define SH7780_PCIAINTM 0xFE040134 +#define SH7780_PCIBMIR 0xFE040138 +#define SH7780_PCIPAR 0xFE0401C0 +#define SH7780_PCIPINT 0xFE0401CC +#define SH7780_PCIPINTM 0xFE0401D0 +#define SH7780_PCIMBR0 0xFE0401E0 +#define SH7780_PCIMBMR0 0xFE0401E4 +#define SH7780_PCIMBR1 0xFE0401E8 +#define SH7780_PCIMBMR1 0xFE0401EC +#define SH7780_PCIMBR2 0xFE0401F0 +#define SH7780_PCIMBMR2 0xFE0401F4 +#define SH7780_PCIIOBR 0xFE0401F8 +#define SH7780_PCIIOBMR 0xFE0401FC +#define SH7780_PCICSCR0 0xFE040210 +#define SH7780_PCICSCR1 0xFE040214 +#define SH7780_PCICSAR0 0xFE040218 +#define SH7780_PCICSAR1 0xFE04021C +#define SH7780_PCIPDR 0xFE040220 + +#endif /* _ASM_CPU_SH7780_H_ */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index 388aa69..938a89c 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -1,6 +1,9 @@ #ifndef _ASM_SH_PROCESSOR_H_ #define _ASM_SH_PROCESSOR_H_ -#if defined CONFIG_SH3 +#if defined(CONFIG_SH2) || \ + defined (CONFIG_SH2A) +# include <asm/cpu_sh2.h> +#elif defined (CONFIG_SH3) # include <asm/cpu_sh3.h> #elif defined (CONFIG_SH4) || \ defined (CONFIG_SH4A) diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index e836132..b32eabe 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -102,12 +102,15 @@ /* I2C */ #define CONFIG_FSL_I2C -#define CONFIG_HARD_I2C /* I2C with hw support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 80000 #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_OFFSET 0x00000300 #define CFG_IMMR CFG_MBAR +#define CFG_I2C_PINMUX_REG (gpio->par_qspi) +#define CFG_I2C_PINMUX_CLR ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK) +#define CFG_I2C_PINMUX_SET (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index c2f5dd9..6bf2d99 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -41,8 +41,8 @@ #define CONFIG_MCFUART #define CFG_UART_PORT (0) -#define CONFIG_BAUDRATE 19200 -#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index f2c2317..9f78f6e 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -118,6 +118,17 @@ #define CONFIG_HOSTNAME M5253DEMO +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x00000280 +#define CFG_IMMR CFG_MBAR +#define CFG_I2C_PINMUX_REG (*(u32 *) (CFG_MBAR+0x19C)) +#define CFG_I2C_PINMUX_CLR (0xFFFFE7FF) +#define CFG_I2C_PINMUX_SET (0) + #define CFG_PROMPT "=> " #define CFG_LONGHELP /* undef to save memory */ diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 12f9783..78a1b93 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -42,7 +42,7 @@ #define CONFIG_MCFUART #define CFG_UART_PORT (0) -#define CONFIG_BAUDRATE 19200 +#define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG /* disable watchdog */ diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 7edd322..fc457e3 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -40,8 +40,8 @@ #define CONFIG_MCFUART #define CFG_UART_PORT (0) -#define CONFIG_BAUDRATE 19200 -#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ @@ -91,6 +91,7 @@ #ifdef CONFIG_MCFFEC # define CONFIG_NET_MULTI 1 # define CONFIG_MII 1 +# define CONFIG_MII_INIT 1 # define CFG_DISCOVER_PHY # define CFG_RX_ETH_BUFFER 8 # define CFG_FAULT_ECHO_LINK_DOWN diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 30c70e5..430af6b 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -45,7 +45,7 @@ #define CONFIG_MCFUART #define CFG_UART_PORT (0) -#define CONFIG_BAUDRATE 19200 +#define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } /* Configuration for environment @@ -118,6 +118,9 @@ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_OFFSET 0x00000300 #define CFG_IMMR CFG_MBAR +#define CFG_I2C_PINMUX_REG (gpio_reg->par_feci2c) +#define CFG_I2C_PINMUX_CLR (0xFFF0) +#define CFG_I2C_PINMUX_SET (0x000F) #ifdef CONFIG_MCFFEC #define CONFIG_ETHADDR 00:06:3b:01:41:55 diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 279a12b..eb59c25 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -40,8 +40,8 @@ #define CONFIG_MCFUART #define CFG_UART_PORT (0) -#define CONFIG_BAUDRATE 19200 -#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 588c00c..cf58239 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -140,9 +140,8 @@ "u-boot=u-boot.bin\0" \ "load=tftp ${loadaddr) ${u-boot}\0" \ "upd=run load; run prog\0" \ - "prog=prot off 0 " MK_STR(CFG_UBOOT_END)\ - "; era 0 " MK_STR(CFG_UBOOT_END) \ - "2ffff;" \ + "prog=prot off 0 " MK_STR(CFG_UBOOT_END) \ + "; era 0 " MK_STR(CFG_UBOOT_END) " ;" \ "cp.b ${loadaddr} 0 ${filesize};" \ "save\0" \ "" diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 476aba3..ad9c15e 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -157,7 +157,7 @@ " " MK_STR(CFG_UBOOT_END) ";" \ "era " MK_STR(CFG_FLASH_BASE) " " \ MK_STR(CFG_UBOOT_END) ";" \ - "cp.b ${loadaddr} " MK_STR(CFG_FLASH_BASE)\ + "cp.b ${loadaddr} " MK_STR(CFG_FLASH_BASE) \ " ${filesize}; save\0" \ "" #endif @@ -388,9 +388,6 @@ #endif #endif -#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ -#define CFG_FLASH_CHECKSUM - /* * This is setting for JFFS2 support in u-boot. * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 4037efb..af6723c 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -226,7 +226,7 @@ */ #define CFG_SDRAM_BASE 0x00000000 #define CFG_SDRAM_CFG1 0x73711630 -#define CFG_SDRAM_CFG2 0x46370000 +#define CFG_SDRAM_CFG2 0x46770000 #define CFG_SDRAM_CTRL 0xE10B0000 #define CFG_SDRAM_EMOD 0x40010000 #define CFG_SDRAM_MODE 0x018D0000 diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index a14c55b..248db53 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -212,7 +212,7 @@ */ #define CFG_SDRAM_BASE 0x00000000 #define CFG_SDRAM_CFG1 0x73711630 -#define CFG_SDRAM_CFG2 0x46370000 +#define CFG_SDRAM_CFG2 0x46770000 #define CFG_SDRAM_CTRL 0xE10B0000 #define CFG_SDRAM_EMOD 0x40010000 #define CFG_SDRAM_MODE 0x018D0000 diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h index 5f74afb..f516c46 100644 --- a/include/configs/ads5121.h +++ b/include/configs/ads5121.h @@ -210,6 +210,7 @@ #define CFG_CS0_CFG 0x05059310 /* ALE active low, data size 4bytes */ #define CFG_CS2_CFG 0x05059010 /* ALE active low, data size 1byte */ +#define CFG_CS_ALETIMING 0x00000005 /* Use alternative CS timing for CS0 and CS2 */ /* Use SRAM for initial stack */ #define CFG_INIT_RAM_ADDR CFG_SRAM_BASE /* Initial RAM address */ diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h new file mode 100644 index 0000000..81a118d --- /dev/null +++ b/include/configs/ap325rxa.h @@ -0,0 +1,177 @@ +/* + * Configuation settings for the Renesas Solutions AP-325RXA board + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __AP325RXA_H +#define __AP325RXA_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7723 1 +#define CONFIG_AP325RXA 1 + +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_ENV +#define CONFIG_CMD_IDE +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION + +#define CONFIG_BAUDRATE 38400 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC2,38400" + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* SMC9118 */ +#define CONFIG_DRIVER_SMC911X 1 +#define CONFIG_DRIVER_SMC911X_32_BIT 1 +#define CONFIG_DRIVER_SMC911X_BASE 0xB6080000 + +/* MEMORY */ +#define AP325RXA_SDRAM_BASE (0x88000000) +#define AP325RXA_FLASH_BASE_1 (0xA0000000) +#define AP325RXA_FLASH_BANK_SIZE (128 * 1024 * 1024) + +/* undef to save memory */ +#define CFG_LONGHELP +/* Monitor Command Prompt */ +#define CFG_PROMPT "=> " +/* Buffer size for input from the Console */ +#define CFG_CBSIZE 256 +/* Buffer size for Console output */ +#define CFG_PBSIZE 256 +/* max args accepted for monitor commands */ +#define CFG_MAXARGS 16 +/* Buffer size for Boot Arguments passed to kernel */ +#define CFG_BARGSIZE 512 +/* List of legal baudrate settings for this board */ +#define CFG_BAUDRATE_TABLE { 38400 } + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE 1 +#define CONFIG_SCIF_A 1 /* SH7723 has SCIF and SCIFA */ +#define CONFIG_CONS_SCIF5 1 + +/* Suppress display of console information at boot */ +#undef CFG_CONSOLE_INFO_QUIET +#undef CFG_CONSOLE_OVERWRITE_ROUTINE +#undef CFG_CONSOLE_ENV_OVERWRITE + +#define CFG_MEMTEST_START (AP325RXA_SDRAM_BASE) +#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024)) + +/* Enable alternate, more extensive, memory test */ +#undef CFG_ALT_MEMTEST +/* Scratch address used by the alternate memory test */ +#undef CFG_MEMTEST_SCRATCH + +/* Enable temporary baudrate change while serial download */ +#undef CFG_LOADS_BAUD_CHANGE + +#define CFG_SDRAM_BASE (AP325RXA_SDRAM_BASE) +/* maybe more, but if so u-boot doesn't know about it... */ +#define CFG_SDRAM_SIZE (128 * 1024 * 1024) +/* default load address for scripts ?!? */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 16 * 1024 * 1024) + +/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ +#define CFG_MONITOR_BASE (AP325RXA_FLASH_BASE_1) +/* Monitor size */ +#define CFG_MONITOR_LEN (128 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CFG_MALLOC_LEN (256 * 1024) +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#undef CFG_FLASH_QUIET_TEST +/* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_EMPTY_INFO +/* Physical start address of Flash memory */ +#define CFG_FLASH_BASE (AP325RXA_FLASH_BASE_1) +/* Max number of sectors on each Flash chip */ +#define CFG_MAX_FLASH_SECT 512 + +/* + * IDE support + */ +#define CONFIG_IDE_RESET 1 +#define CFG_PIO_MODE 1 +#define CFG_IDE_MAXBUS 1 /* IDE bus */ +#define CFG_IDE_MAXDEVICE 1 +#define CFG_ATA_BASE_ADDR 0xB4180000 +#define CFG_ATA_STRIDE 2 /* 1bit shift */ +#define CFG_ATA_DATA_OFFSET 0x200 /* data reg offset */ +#define CFG_ATA_REG_OFFSET 0x200 /* reg offset */ +#define CFG_ATA_ALT_OFFSET 0x210 /* alternate register offset */ + +/* if you use all NOR Flash , you change dip-switch. Please see Manual. */ +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)} + +/* Timeout for Flash erase operations (in ms) */ +#define CFG_FLASH_ERASE_TOUT (3 * 1000) +/* Timeout for Flash write operations (in ms) */ +#define CFG_FLASH_WRITE_TOUT (3 * 1000) +/* Timeout for Flash set sector lock bit operations (in ms) */ +#define CFG_FLASH_LOCK_TOUT (3 * 1000) +/* Timeout for Flash clear lock bit operations (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) + +/* + * Use hardware flash sectors protection instead + * of U-Boot software protection + */ +#undef CFG_FLASH_PROTECTION +#undef CFG_DIRECT_FLASH_TFTP + +/* ENV setting */ +#define CFG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OVERWRITE 1 +#define CFG_ENV_SECT_SIZE (128 * 1024) +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +/* Offset of env Flash sector relative to CFG_FLASH_BASE */ +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE) + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 33333333 +#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +#endif /* __AP325RXA_H */ diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h new file mode 100644 index 0000000..23598f3 --- /dev/null +++ b/include/configs/rsk7203.h @@ -0,0 +1,107 @@ +/* + * Configuation settings for the Renesas Technology RSK 7203 + * + * Copyright (C) 2008 Nobuhiro Iwamatsu + * Copyright (C) 2008 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __RSK7203_H +#define __RSK7203_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH2 1 +#define CONFIG_SH2A 1 +#define CONFIG_CPU_SH7203 1 +#define CONFIG_RSK7203 1 + +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_ENV +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_CACHE + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS "console=ttySC0,115200" +#define CONFIG_LOADADDR 0x0C100000 /* RSK7203_SDRAM_BASE + 1MB */ + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* MEMORY */ +#define RSK7203_SDRAM_BASE 0x0C000000 +#define RSK7203_FLASH_BASE_1 0x20000000 /* Non cache */ +#define RSK7203_FLASH_BANK_SIZE (4 * 1024 * 1024) + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Buffer size for input from the Console */ +#define CFG_PBSIZE 256 /* Buffer size for Console output */ +#define CFG_MAXARGS 16 /* max args accepted for monitor commands */ +/* Buffer size for Boot Arguments passed to kernel */ +#define CFG_BARGSIZE 512 +/* List of legal baudrate settings for this board */ +#define CFG_BAUDRATE_TABLE { 115200 } + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF0 1 + +#define CFG_MEMTEST_START RSK7203_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_MEMTEST_START + (3 * 1024 * 1024)) + +#define CFG_SDRAM_BASE RSK7203_SDRAM_BASE +#define CFG_SDRAM_SIZE (32 * 1024 * 1024) + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 1024 * 1024) +#define CFG_MONITOR_BASE RSK7203_FLASH_BASE_1 +#define CFG_MONITOR_LEN (128 * 1024) +#define CFG_MALLOC_LEN (256 * 1024) +#define CFG_GBL_DATA_SIZE 256 +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CONFIG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#undef CFG_FLASH_QUIET_TEST +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_BASE RSK7203_FLASH_BASE_1 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_MAX_FLASH_SECT 64 +#define CFG_MAX_FLASH_BANKS 1 + +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE (64 * 1024) +#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_FLASH_ERASE_TOUT 12000 +#define CFG_FLASH_WRITE_TOUT 500 + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 33333333 +#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */ +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) + +#endif /* __RSK7203_H */ diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h new file mode 100644 index 0000000..efdb163 --- /dev/null +++ b/include/configs/sh7785lcr.h @@ -0,0 +1,167 @@ +/* + * Configuation settings for the Renesas Technology R0P7785LC0011RL board + * + * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __SH7785LCR_H +#define __SH7785LCR_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4A 1 +#define CONFIG_CPU_SH7785 1 +#define CONFIG_SH7785LCR 1 + +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_NFS +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_RUN +#define CONFIG_CMD_ENV + +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC1,115200 root=/dev/nfs ip=dhcp" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootdevice=0:1\0" \ + "usbload=usb reset;usbboot;usb stop;bootm\0" + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* MEMORY */ +#define SH7785LCR_SDRAM_BASE (0x08000000) +#define SH7785LCR_SDRAM_SIZE (128 * 1024 * 1024) +#define SH7785LCR_FLASH_BASE_1 (0xa0000000) +#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024) +#define SH7785LCR_USB_BASE (0xb4000000) + +#define CFG_LONGHELP +#define CFG_PROMPT "=> " +#define CFG_CBSIZE 256 +#define CFG_PBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE 512 +#define CFG_BAUDRATE_TABLE { 115200 } + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF1 1 +#define CONFIG_SCIF_EXT_CLOCK 1 +#undef CFG_CONSOLE_INFO_QUIET +#undef CFG_CONSOLE_OVERWRITE_ROUTINE +#undef CFG_CONSOLE_ENV_OVERWRITE + + +#define CFG_MEMTEST_START (SH7785LCR_SDRAM_BASE) +#define CFG_MEMTEST_END (CFG_MEMTEST_START + \ + (SH7785LCR_SDRAM_SIZE) - \ + 4 * 1024 * 1024) +#undef CFG_ALT_MEMTEST +#undef CFG_MEMTEST_SCRATCH +#undef CFG_LOADS_BAUD_CHANGE + +#define CFG_SDRAM_BASE (SH7785LCR_SDRAM_BASE) +#define CFG_SDRAM_SIZE (SH7785LCR_SDRAM_SIZE) +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 16 * 1024 * 1024) + +#define CFG_MONITOR_BASE (SH7785LCR_FLASH_BASE_1) +#define CFG_MONITOR_LEN (512 * 1024) +#define CFG_MALLOC_LEN (512 * 1024) +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CONFIG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#undef CFG_FLASH_QUIET_TEST +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_BASE (SH7785LCR_FLASH_BASE_1) +#define CFG_MAX_FLASH_SECT 512 + +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + \ + (0 * SH7785LCR_FLASH_BANK_SIZE) } + +#define CFG_FLASH_ERASE_TOUT (3 * 1000) +#define CFG_FLASH_WRITE_TOUT (3 * 1000) +#define CFG_FLASH_LOCK_TOUT (3 * 1000) +#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) + +#undef CFG_FLASH_PROTECTION +#undef CFG_DIRECT_FLASH_TFTP + +/* R8A66597 */ +#define LITTLEENDIAN /* for include/usb.h */ +#define CONFIG_USB_R8A66597_HCD +#define CONFIG_R8A66597_BASE_ADDR SH7785LCR_USB_BASE +#define CONFIG_R8A66597_XTAL 0x0000 /* 12MHz */ +#define CONFIG_R8A66597_LDRV 0x8000 /* 3.3V */ +#define CONFIG_R8A66597_ENDIAN 0x0000 /* little */ + +/* PCI Controller */ +#define CONFIG_PCI +#define CONFIG_SH4_PCI +#define CONFIG_SH7780_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW 1 + +#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ + +#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ + +/* Network device (RTL8169) support */ +#define CONFIG_NET_MULTI +#define CONFIG_RTL8169 + +/* ENV setting */ +#define CFG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OVERWRITE 1 +#define CFG_ENV_SECT_SIZE (256 * 1024) +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE) + +/* Board Clock */ +/* The SCIF used external clock. system clock only used timer. */ +#define CONFIG_SYS_CLK_FREQ 50000000 +#define TMU_CLK_DIVIDER 4 +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +#endif /* __SH7785LCR_H */ diff --git a/include/mpc512x.h b/include/mpc512x.h index a76b1ca..cb418d1 100644 --- a/include/mpc512x.h +++ b/include/mpc512x.h @@ -58,6 +58,7 @@ #define CS5_CONFIG 0x00014 #define CS6_CONFIG 0x00018 #define CS7_CONFIG 0x0001C +#define CS_ALE_TIMING_CONFIG 0x00034 #define CS_CTRL 0x00020 #define CS_CTRL_ME 0x01000000 /* CS Master Enable bit */ diff --git a/cpu/mpc5xxx/sdma.h b/include/mpc5xxx_sdma.h index 8b740e4..8b740e4 100644 --- a/cpu/mpc5xxx/sdma.h +++ b/include/mpc5xxx_sdma.h diff --git a/lib_m68k/board.c b/lib_m68k/board.c index e59c6b0..4fee35a 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -63,6 +63,8 @@ #include <spi.h> #endif +#include <nand.h> + DECLARE_GLOBAL_DATA_PTR; static char *failed = "*** failed ***\n"; |