diff options
-rw-r--r-- | CHANGELOG | 54 | ||||
-rw-r--r-- | README | 17 | ||||
-rw-r--r-- | common/cmd_bootm.c | 16 | ||||
-rw-r--r-- | common/ft_build.c | 49 | ||||
-rw-r--r-- | cpu/mpc83xx/cpu.c | 38 | ||||
-rw-r--r-- | cpu/mpc83xx/cpu_init.c | 16 | ||||
-rw-r--r-- | cpu/mpc83xx/interrupts.c | 10 | ||||
-rw-r--r-- | cpu/mpc83xx/start.S | 6 | ||||
-rw-r--r-- | drivers/pci.c | 1 | ||||
-rw-r--r-- | drivers/pci_auto.c | 58 | ||||
-rw-r--r-- | include/configs/MPC8349ADS.h | 4 | ||||
-rw-r--r-- | include/configs/TQM834x.h | 4 | ||||
-rw-r--r-- | include/configs/stxxtc.h | 2 | ||||
-rw-r--r-- | include/ft_build.h | 4 | ||||
-rw-r--r-- | include/pci.h | 4 |
15 files changed, 252 insertions, 31 deletions
@@ -2,6 +2,60 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add helper function for generic flat device tree fixups for mpc83xx + Patch by Kumar Gala 11 Jan 2006 + +* Add support for passing initrd information via flat device tree + Patch by Kumar Gala 11 Jan 2006 + +* Added OF_STDOUT_PATH and OF_SOC + + OF_STDOUT_PATH specifies the path to the device the kernel can use + for console output + + OF_SOC specifies the proper name of the SOC node if one exists. + Patch by Kumar Gala 11 Jan 2006 + +* Allow board code to fixup the flat device tree before booting a + kernel + Patch by Kumar Gala 11 Jan 2006 + +* Added CONFIG_ options for bd_t and env in flat dev tree + + CONFIG_OF_HAS_BD_T will put a copy of the bd_t + into the resulting flat device tree. + + CONFIG_OF_HAS_UBOOT_ENV will copy the environment + variables from u-boot into the flat device tree + + Patch by Kumar Gala 11 Jan 2006 + +* Report back PCI bus when doing table based device config + Patch by Kumar Gala 11 Jan 2006 + +* Added support for PCI prefetchable region and BARs + If a host controller sets up a region as prefetchable and + a device's BAR denotes it as prefetchable, allocate the + BAR into the prefetch region. + + If a BAR is prefetchable and no prefetchable region has + been setup by the controller we fall back to allocating + the BAR into the normally memory region. + Patch by Kumar Gala 11 Jan 2006 + +* Only disable the MPC83xx watchdog if its enabled out of reset. + If its disabled out of reset SW can later enable it if so desired + Patch by Kumar Gala, 11 Jan 2006 + +* Allow config of GPIO direction & data registers at boot on 83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Enable time handling on 83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Make System IO Config Registers board configurable on MPC83xx + Patch by Kumar Gala, 11 Jan 2006 + * Added PCI support for MPC8349ADS board Patch by Kumar Gala 11 Jan 2006 @@ -411,7 +411,24 @@ The following options need to be configured: The maximum size of the constructed OF tree. OF_CPU - The proper name of the cpus node. + OF_SOC - The proper name of the soc node. OF_TBCLK - The timebase frequency. + OF_STDOUT_PATH - The path to the console device + + CONFIG_OF_HAS_BD_T + + The resulting flat device tree will have a copy of the bd_t. + Space should be pre-allocated in the dts for the bd_t. + + CONFIG_OF_HAS_UBOOT_ENV + + The resulting flat device tree will have a copy of u-boot's + environment variables + + CONFIG_OF_BOARD_SETUP + + Board code has addition modification that it wants to make + to the flat device tree before handing it off to the kernel - Serial Ports: CFG_PL010_SERIAL diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 8599a49..9562dbe 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -819,7 +819,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end); #else - ft_setup(of_flat_tree, OF_FLAT_TREE_MAX_SIZE, kbd); + ft_setup(of_flat_tree, OF_FLAT_TREE_MAX_SIZE, kbd, initrd_start, initrd_end); /* ft_dump_blob(of_flat_tree); */ #if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500) @@ -828,12 +828,16 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, /* * Linux Kernel Parameters: * r3: ptr to OF flat tree, followed by the board info data - * r4: initrd_start or 0 if no initrd - * r5: initrd_end - unused if r4 is 0 - * r6: Start of command line string - * r7: End of command line string + * r4: physical pointer to the kernel itself + * r5: NULL + * r6: NULL + * r7: NULL */ - (*kernel) ((bd_t *)of_flat_tree, initrd_start, initrd_end, cmd_start, cmd_end); + if (getenv("disable_of") != NULL) + (*kernel) ((bd_t *)of_flat_tree, initrd_start, initrd_end, + cmd_start, cmd_end); + else + (*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0); #endif } diff --git a/common/ft_build.c b/common/ft_build.c index 65a274f..9e9c906 100644 --- a/common/ft_build.c +++ b/common/ft_build.c @@ -163,7 +163,7 @@ void ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size) ((u64 *) cxt->pres)[0] = cpu_to_be64(physaddr); /* phys = 0, size = 0, terminate */ ((u64 *) cxt->pres)[1] = cpu_to_be64(size); - cxt->pres += 18; /* advance */ + cxt->pres += 16; /* advance */ ((u64 *) cxt->pres)[0] = 0; /* phys = 0, size = 0, terminate */ ((u64 *) cxt->pres)[1] = 0; @@ -529,6 +529,7 @@ extern uchar(*env_get_char) (int); #define BDM(x) { .name = #x, .offset = offsetof(bd_t, bi_ ##x ) } +#ifdef CONFIG_OF_HAS_BD_T static const struct { const char *name; int offset; @@ -574,19 +575,24 @@ static const struct { #endif BDM(baudrate), }; +#endif -void ft_setup(void *blob, int size, bd_t * bd) +void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_end) { - DECLARE_GLOBAL_DATA_PTR; - u8 *end; u32 *p; int len; struct ft_cxt cxt; - int i, k, nxt; - static char tmpenv[256]; - char *s, *lval, *rval; ulong clock; - uint32_t v; +#if defined(CONFIG_OF_HAS_UBOOT_ENV) + int k, nxt; +#endif +#if defined(CONFIG_OF_HAS_BD_T) + u8 *end; +#endif +#if defined(CONFIG_OF_HAS_UBOOT_ENV) || defined(CONFIG_OF_HAS_BD_T) + int i; + static char tmpenv[256]; +#endif /* disable OF tree; booting old kernel */ if (getenv("disable_of") != NULL) { @@ -596,7 +602,8 @@ void ft_setup(void *blob, int size, bd_t * bd) ft_begin(&cxt, blob, size); - /* fs_add_rsvmap not used */ + if (initrd_start && initrd_end) + ft_add_rsvmap(&cxt, initrd_start, initrd_end - initrd_start + 1); ft_begin_tree(&cxt); @@ -610,9 +617,12 @@ void ft_setup(void *blob, int size, bd_t * bd) /* back into root */ ft_backtrack_node(&cxt); +#ifdef CONFIG_OF_HAS_UBOOT_ENV ft_begin_node(&cxt, "u-boot-env"); for (i = 0; env_get_char(i) != '\0'; i = nxt + 1) { + char *s, *lval, *rval; + for (nxt = i; env_get_char(nxt) != '\0'; ++nxt) ; s = tmpenv; for (k = i; k < nxt && s < &tmpenv[sizeof(tmpenv) - 1]; ++k) @@ -629,12 +639,20 @@ void ft_setup(void *blob, int size, bd_t * bd) } ft_end_node(&cxt); +#endif ft_begin_node(&cxt, "chosen"); ft_prop_str(&cxt, "name", "chosen"); ft_prop_str(&cxt, "bootargs", getenv("bootargs")); ft_prop_int(&cxt, "linux,platform", 0x600); /* what is this? */ + if (initrd_start && initrd_end) { + ft_prop_int(&cxt, "linux,initrd-start", initrd_start); + ft_prop_int(&cxt, "linux,initrd-end", initrd_end); + } +#ifdef OF_STDOUT_PATH + ft_prop_str(&cxt, "linux,stdout-path", OF_STDOUT_PATH); +#endif ft_end_node(&cxt); @@ -647,14 +665,19 @@ void ft_setup(void *blob, int size, bd_t * bd) ft_dump_blob(blob); */ +#ifdef CONFIG_OF_HAS_BD_T /* paste the bd_t at the end of the flat tree */ end = (char *)blob + be32_to_cpu(((struct boot_param_header *)blob)->totalsize); memcpy(end, bd, sizeof(*bd)); +#endif #ifdef CONFIG_PPC +#ifdef CONFIG_OF_HAS_BD_T for (i = 0; i < sizeof(bd_map)/sizeof(bd_map[0]); i++) { + uint32_t v; + sprintf(tmpenv, "/bd_t/%s", bd_map[i].name); v = *(uint32_t *)((char *)bd + bd_map[i].offset); @@ -670,6 +693,7 @@ void ft_setup(void *blob, int size, bd_t * bd) p = ft_get_prop(blob, "/bd_t/ethspeed", &len); if (p != NULL) *p = cpu_to_be32((uint32_t) bd->bi_ethspeed); +#endif clock = bd->bi_intfreq; p = ft_get_prop(blob, "/cpus/" OF_CPU "/clock-frequency", &len); @@ -680,11 +704,14 @@ void ft_setup(void *blob, int size, bd_t * bd) clock = OF_TBCLK; p = ft_get_prop(blob, "/cpus/" OF_CPU "/timebase-frequency", &len); if (p != NULL) - *p = cpu_to_be32(OF_TBCLK); + *p = cpu_to_be32(clock); #endif - #endif /* __powerpc__ */ +#ifdef CONFIG_OF_BOARD_SETUP + ft_board_setup(blob, bd); +#endif + /* printf("final OF-tree\n"); ft_dump_blob(blob); diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 8c9b515..e49e4fe 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -35,6 +35,7 @@ #include <watchdog.h> #include <command.h> #include <mpc83xx.h> +#include <ft_build.h> #include <asm/processor.h> @@ -151,3 +152,40 @@ void watchdog_reset (void) hang(); /* FIXME: implement watchdog_reset()? */ } #endif /* CONFIG_WATCHDOG */ + +#if defined(CONFIG_OF_FLAT_TREE) +void +ft_cpu_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + ulong clock; + + clock = bd->bi_busfreq; + p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + + p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + + p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + + p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + +#ifdef CONFIG_MPC83XX_TSEC1 + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/address", &len); + memcpy(p, bd->bi_enetaddr, 6); +#endif + +#ifdef CONFIG_MPC83XX_TSEC2 + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/address", &len); + memcpy(p, bd->bi_enet1addr, 6); +#endif +} +#endif diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index dcb3445..db28a6a 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -63,8 +63,12 @@ void cpu_init_f (volatile immap_t * im) im->sysconf.spcr |= SPCR_TBEN; /* System General Purpose Register */ - im->sysconf.sicrh = SICRH_TSOBI1; - im->sysconf.sicrl = SICRL_LDP_A; +#ifdef CFG_SICRH + im->sysconf.sicrh = CFG_SICRH; +#endif +#ifdef CFG_SICRL + im->sysconf.sicrl = CFG_SICRL; +#endif /* * Memory Controller: @@ -150,6 +154,14 @@ void cpu_init_f (volatile immap_t * im) im->sysconf.lblaw[7].bar = CFG_LBLAWBAR7_PRELIM; im->sysconf.lblaw[7].ar = CFG_LBLAWAR7_PRELIM; #endif +#ifdef CFG_GPIO1_PRELIM + im->pgio[0].dir = CFG_GPIO1_DIR; + im->pgio[0].dat = CFG_GPIO1_DAT; +#endif +#ifdef CFG_GPIO2_PRELIM + im->pgio[1].dir = CFG_GPIO2_DIR; + im->pgio[1].dat = CFG_GPIO2_DAT; +#endif } diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c index 53474f6..dfd51c1 100644 --- a/cpu/mpc83xx/interrupts.c +++ b/cpu/mpc83xx/interrupts.c @@ -43,6 +43,16 @@ struct irq_action { int interrupt_init_cpu (unsigned *decrementer_count) { + DECLARE_GLOBAL_DATA_PTR; + + volatile immap_t *immr = (immap_t *) CFG_IMMRBAR; + + *decrementer_count = (gd->bus_clk / 4) / CFG_HZ; + + /* Enable e300 time base */ + + immr->sysconf.spcr |= 0x00400000; + return 0; } diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index fb001a6..0e1a5fd 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -426,8 +426,14 @@ init_e300_core: /* time t 10 */ #else /* Disable Wathcdog */ /*-------------------*/ + lwz r4, SWCRR(r3) + /* Check to see if its enabled for disabling + once disabled by SW you can't re-enable */ + andi. r4, r4, 0x4 + beq 1f xor r4, r4, r4 stw r4, SWCRR(r3) +1: #endif /* CONFIG_WATCHDOG */ /* Initialize the Hardware Implementation-dependent Registers */ diff --git a/drivers/pci.c b/drivers/pci.c index 5360030..3c24b99 100644 --- a/drivers/pci.c +++ b/drivers/pci.c @@ -459,6 +459,7 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus) PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev)); if (cfg) { cfg->config_device(hose, dev, cfg); + sub_bus = max(sub_bus, hose->current_busno); #ifdef CONFIG_PCI_PNP } else { int n = pciauto_config_device(hose, dev); diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c index 3302457..15f7432 100644 --- a/drivers/pci_auto.c +++ b/drivers/pci_auto.c @@ -77,6 +77,7 @@ int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned void pciauto_setup_device(struct pci_controller *hose, pci_dev_t dev, int bars_num, struct pci_region *mem, + struct pci_region *prefetch, struct pci_region *io) { unsigned int bar_value, bar_response, bar_size; @@ -111,7 +112,10 @@ void pciauto_setup_device(struct pci_controller *hose, found_mem64 = 1; bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1; - bar_res = mem; + if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH)) + bar_res = prefetch; + else + bar_res = mem; DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%x, ", bar_nr, bar_size); } @@ -148,6 +152,7 @@ static void pciauto_prescan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus) { struct pci_region *pci_mem = hose->pci_mem; + struct pci_region *pci_prefetch = hose->pci_prefetch; struct pci_region *pci_io = hose->pci_io; unsigned int cmdstat; @@ -169,6 +174,21 @@ static void pciauto_prescan_setup_bridge(struct pci_controller *hose, cmdstat |= PCI_COMMAND_MEMORY; } + if (pci_prefetch) { + /* Round memory allocator to 1MB boundary */ + pciauto_region_align(pci_prefetch, 0x100000); + + /* Set up memory and I/O filter limits, assume 32-bit I/O space */ + pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, + (pci_prefetch->bus_lower & 0xfff00000) >> 16); + + cmdstat |= PCI_COMMAND_MEMORY; + } else { + /* We don't support prefetchable memory for now, so disable */ + pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000); + pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x1000); + } + if (pci_io) { /* Round I/O allocator to 4KB boundary */ pciauto_region_align(pci_io, 0x1000); @@ -181,10 +201,6 @@ static void pciauto_prescan_setup_bridge(struct pci_controller *hose, cmdstat |= PCI_COMMAND_IO; } - /* We don't support prefetchable memory for now, so disable */ - pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000); - pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x1000); - /* Enable memory and I/O accesses, enable bus master */ pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER); } @@ -193,6 +209,7 @@ static void pciauto_postscan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus) { struct pci_region *pci_mem = hose->pci_mem; + struct pci_region *pci_prefetch = hose->pci_prefetch; struct pci_region *pci_io = hose->pci_io; /* Configure bus number registers */ @@ -206,6 +223,14 @@ static void pciauto_postscan_setup_bridge(struct pci_controller *hose, (pci_mem->bus_lower-1) >> 16); } + if (pci_prefetch) { + /* Round memory allocator to 1MB boundary */ + pciauto_region_align(pci_prefetch, 0x100000); + + pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, + (pci_prefetch->bus_lower-1) >> 16); + } + if (pci_io) { /* Round I/O allocator to 4KB boundary */ pciauto_region_align(pci_io, 0x1000); @@ -239,6 +264,11 @@ void pciauto_config_init(struct pci_controller *hose) hose->pci_mem->size < hose->regions[i].size) hose->pci_mem = hose->regions + i; break; + case (PCI_REGION_MEM | PCI_REGION_PREFETCH): + if (!hose->pci_prefetch || + hose->pci_prefetch->size < hose->regions[i].size) + hose->pci_prefetch = hose->regions + i; + break; } } @@ -251,6 +281,14 @@ void pciauto_config_init(struct pci_controller *hose) hose->pci_mem->bus_start + hose->pci_mem->size - 1); } + if (hose->pci_prefetch) { + pciauto_region_init(hose->pci_prefetch); + + DEBUGF("PCI Autoconfig: Prefetchable Memory region: [%lx-%lx]\n", + hose->pci_prefetch->bus_start, + hose->pci_prefetch->bus_start + hose->pci_prefetch->size - 1); + } + if (hose->pci_io) { pciauto_region_init(hose->pci_io); @@ -275,7 +313,7 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) switch(class) { case PCI_CLASS_BRIDGE_PCI: hose->current_busno++; - pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_io); + pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_prefetch, hose->pci_io); DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev)); @@ -301,12 +339,12 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) return sub_bus; } - pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_io); + pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io); break; case PCI_CLASS_BRIDGE_CARDBUS: /* just do a minimal setup of the bridge, let the OS take care of the rest */ - pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_io); + pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io); DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev)); @@ -328,11 +366,11 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) * the PIMMR window to be allocated (BAR0 - 1MB size) */ DEBUGF("PCI Autoconfig: Broken bridge found, only minimal config\n"); - pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_io); + pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io); break; #endif default: - pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_io); + pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io); break; } diff --git a/include/configs/MPC8349ADS.h b/include/configs/MPC8349ADS.h index 41309ac..7197e0f 100644 --- a/include/configs/MPC8349ADS.h +++ b/include/configs/MPC8349ADS.h @@ -504,6 +504,10 @@ HRCWH_TSEC2M_IN_GMII ) #endif +/* System IO Config */ +#define CFG_SICRH SICRH_TSOBI1 +#define CFG_SICRL SICRL_LDP_A + #define CFG_HID0_INIT 0x000000000 #define CFG_HID0_FINAL CFG_HID0_INIT diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 41f44c5..1cf66a9 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -417,6 +417,10 @@ extern int tqm834x_num_flash_banks; HRCWH_TSEC2M_IN_GMII ) #endif +/* System IO Config */ +#define CFG_SICRH SICRH_TSOBI1 +#define CFG_SICRL SICRL_LDP_A + /* i-cache and d-cache disabled */ #define CFG_HID0_INIT 0x000000000 #define CFG_HID0_FINAL CFG_HID0_INIT diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index 3ffe6b2..be6c36c 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -584,5 +584,7 @@ typedef unsigned int led_id_t; #define OF_CPU "PowerPC,MPC870@0" #define OF_TBCLK (MPC8XX_HZ / 16) +#define CONFIG_OF_HAS_BD_T 1 +#define CONFIG_OF_HAS_UBOOT_ENV 1 #endif /* __CONFIG_H */ diff --git a/include/ft_build.h b/include/ft_build.h index 9104b1a..47ca575 100644 --- a/include/ft_build.h +++ b/include/ft_build.h @@ -57,10 +57,12 @@ void ft_prop_int(struct ft_cxt *cxt, const char *name, int val); void ft_begin(struct ft_cxt *cxt, void *blob, int max_size); void ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size); -void ft_setup(void *blob, int size, bd_t * bd); +void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_end); void ft_dump_blob(const void *bphp); void ft_merge_blob(struct ft_cxt *cxt, void *blob); void *ft_get_prop(void *bphp, const char *propname, int *szp); +void ft_board_setup(void *blob, bd_t *bd); + #endif diff --git a/include/pci.h b/include/pci.h index 8f19997..f78a769 100644 --- a/include/pci.h +++ b/include/pci.h @@ -309,6 +309,7 @@ struct pci_region { #define PCI_REGION_MEM 0x00000000 /* PCI memory space */ #define PCI_REGION_IO 0x00000001 /* PCI IO space */ #define PCI_REGION_TYPE 0x00000001 +#define PCI_REGION_PREFETCH 0x00000008 /* prefetchable PCI memory */ #define PCI_REGION_MEMORY 0x00000100 /* System memory */ #define PCI_REGION_RO 0x00000200 /* Read-only memory */ @@ -386,7 +387,7 @@ struct pci_controller { int (*write_dword)(struct pci_controller*, pci_dev_t, int where, u32); /* Used by auto config */ - struct pci_region *pci_mem, *pci_io; + struct pci_region *pci_mem, *pci_io, *pci_prefetch; /* Used by ppc405 autoconfig*/ struct pci_region *pci_fb; @@ -472,6 +473,7 @@ extern int pciauto_region_allocate(struct pci_region* res, unsigned int size, un extern void pciauto_setup_device(struct pci_controller *hose, pci_dev_t dev, int bars_num, struct pci_region *mem, + struct pci_region *prefetch, struct pci_region *io); int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); |