summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS4
-rwxr-xr-xMAKEALL1
-rw-r--r--arch/powerpc/cpu/mpc8xx/cpu_init.c3
-rw-r--r--board/gth/Makefile44
-rw-r--r--board/gth/README18
-rw-r--r--board/gth/config.mk40
-rw-r--r--board/gth/ee_access.c335
-rw-r--r--board/gth/ee_access.h16
-rw-r--r--board/gth/ee_dev.h85
-rw-r--r--board/gth/flash.c649
-rw-r--r--board/gth/gth.c595
-rw-r--r--board/gth/pcmcia.c93
-rw-r--r--board/gth/u-boot.lds127
-rw-r--r--boards.cfg1
-rw-r--r--common/env_common.c2
-rw-r--r--include/commproc.h32
-rw-r--r--include/configs/GTH.h389
17 files changed, 2 insertions, 2432 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 4597798..4b91b0f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -262,10 +262,6 @@ Sangmoon Kim <dogoil@etinsys.com>
debris MPC8245
KVME080 MPC8245
-Thomas Lange <thomas@corelatus.se>
-
- GTH MPC860
-
Robert Lazarski <robertlazarski@gmail.com>
ATUM8548 MPC8548
diff --git a/MAKEALL b/MAKEALL
index 83cee9d..2133559 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -118,7 +118,6 @@ LIST_8xx=" \
GEN860T \
GEN860T_SC \
GENIETV \
- GTH \
hermes \
IAD210 \
ICU862_100MHz \
diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c
index eb0091b..e97ae68 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c
@@ -149,8 +149,7 @@ void cpu_init_f (volatile immap_t * immr)
* I owe him a free beer. - wd]
*/
-#if defined(CONFIG_GTH) || \
- defined(CONFIG_HERMES) || \
+#if defined(CONFIG_HERMES) || \
defined(CONFIG_ICU862) || \
defined(CONFIG_IP860) || \
defined(CONFIG_IVML24) || \
diff --git a/board/gth/Makefile b/board/gth/Makefile
deleted file mode 100644
index 4b5c528..0000000
--- a/board/gth/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS = $(BOARD).o flash.o ee_access.o pcmcia.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/gth/README b/board/gth/README
deleted file mode 100644
index 241c70b..0000000
--- a/board/gth/README
+++ /dev/null
@@ -1,18 +0,0 @@
-Written by Thomas.Lange@corelatus.com 010805
-
-To make a system for gth that actually works ;-)
-the variable TBASE needs to be set to 0,1 or 2
-depending on location where image is supposed to
-be started from.
-E.g. make TBASE=1
-
-0: Start from RAM, base 0
-
-1: Start from flash_base + 0x10070
-
-2: Start from flash_base + 0x30070
-
-When using 1 or 2, the image is supposed to be launched
-from miniboot that boots the first U-Boot image found in
-flash.
-For miniboot code, description, see www.opensource.se
diff --git a/board/gth/config.mk b/board/gth/config.mk
deleted file mode 100644
index 3c80156..0000000
--- a/board/gth/config.mk
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-ifeq ($(TBASE),0)
-TEXT_BASE = 0
-else
-ifeq ($(TBASE),1)
-TEXT_BASE = 0x80010070
-else
-ifeq ($(TBASE),2)
-TEXT_BASE = 0x80030070
-else
-## Only to make ordinary make work
-TEXT_BASE = 0x90000000
-endif
-endif
-endif
-
-OBJCFLAGS = --set-section-flags=.ppcenv=contents,alloc,load,data
diff --git a/board/gth/ee_access.c b/board/gth/ee_access.c
deleted file mode 100644
index 2a33a0e..0000000
--- a/board/gth/ee_access.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/* Module for handling DALLAS DS2438, smart battery monitor
- Chip can store up to 40 bytes of user data in EEPROM,
- perform temp, voltage and current measurements.
- Chip also contains a unique serial number.
-
- Always read/write LSb first
-
- For documentaion, see data sheet for DS2438, 2438.pdf
-
- By Thomas.Lange@corelatus.com 001025 */
-
-#include <common.h>
-#include <config.h>
-#include <mpc8xx.h>
-
-#include <../board/gth/ee_dev.h>
-
-/* We dont have kernel functions */
-#define printk printf
-#define KERN_DEBUG
-#define KERN_ERR
-#define EIO 1
-
-static int Debug = 0;
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-/*
- * lookup table ripped from DS app note 17, understanding and using
- * cyclic redundancy checks...
- */
-
-static u8 crc_lookup[256] = {
- 0, 94, 188, 226, 97, 63, 221, 131,
- 194, 156, 126, 32, 163, 253, 31, 65,
- 157, 195, 33, 127, 252, 162, 64, 30,
- 95, 1, 227, 189, 62, 96, 130, 220,
- 35, 125, 159, 193, 66, 28, 254, 160,
- 225, 191, 93, 3, 128, 222, 60, 98,
- 190, 224, 2, 92, 223, 129, 99, 61,
- 124, 34, 192, 158, 29, 67, 161, 255,
- 70, 24, 250, 164, 39, 121, 155, 197,
- 132, 218, 56, 102, 229, 187, 89, 7,
- 219, 133, 103, 57, 186, 228, 6, 88,
- 25, 71, 165, 251, 120, 38, 196, 154,
- 101, 59, 217, 135, 4, 90, 184, 230,
- 167, 249, 27, 69, 198, 152, 122, 36,
- 248, 166, 68, 26, 153, 199, 37, 123,
- 58, 100, 134, 216, 91, 5, 231, 185,
- 140, 210, 48, 110, 237, 179, 81, 15,
- 78, 16, 242, 172, 47, 113, 147, 205,
- 17, 79, 173, 243, 112, 46, 204, 146,
- 211, 141, 111, 49, 178, 236, 14, 80,
- 175, 241, 19, 77, 206, 144, 114, 44,
- 109, 51, 209, 143, 12, 82, 176, 238,
- 50, 108, 142, 208, 83, 13, 239, 177,
- 240, 174, 76, 18, 145, 207, 45, 115,
- 202, 148, 118, 40, 171, 245, 23, 73,
- 8, 86, 180, 234, 105, 55, 213, 139,
- 87, 9, 235, 181, 54, 104, 138, 212,
- 149, 203, 41, 119, 244, 170, 72, 22,
- 233, 183, 85, 11, 136, 214, 52, 106,
- 43, 117, 151, 201, 74, 20, 246, 168,
- 116, 42, 200, 150, 21, 75, 169, 247,
- 182, 232, 10, 84, 215, 137, 107, 53
-};
-
-static u8 make_new_crc( u8 Old_crc, u8 New_value ){
- /* Compute a new checksum with new byte, using previous checksum as input
- See DS app note 17, understanding and using cyclic redundancy checks...
- Also see DS2438, page 11 */
- return( crc_lookup[Old_crc ^ New_value ]);
-}
-
-int ee_crc_ok( u8 *Buffer, int Len, u8 Crc ){
- /* Check if the checksum for this buffer is correct */
- u8 Curr_crc=0;
- int i;
- u8 *Curr_byte = Buffer;
-
- for(i=0;i<Len;i++){
- Curr_crc = make_new_crc( Curr_crc, *Curr_byte);
- Curr_byte++;
- }
- E_DEBUG("Calculated CRC = 0x%x, read = 0x%x\n", Curr_crc, Crc);
-
- if(Curr_crc == Crc){
- /* Good */
- return(TRUE);
- }
- printk(KERN_ERR"EE checksum error, Calculated CRC = 0x%x, read = 0x%x\n",
- Curr_crc, Crc);
- return(FALSE);
-}
-
-static void
-set_idle(void){
- /* Send idle and keep start time
- Continous 1 is idle */
- WRITE_PORT(1);
-}
-
-static int
-do_reset(void){
- /* Release reset and verify that chip responds with presence pulse */
- int Retries = 0;
- while(Retries<5){
- udelay(RESET_LOW_TIME);
-
- /* Send reset */
- WRITE_PORT(0);
- udelay(RESET_LOW_TIME);
-
- /* Release reset */
- WRITE_PORT(1);
-
- /* Wait for EEPROM to drive output */
- udelay(PRESENCE_TIMEOUT);
- if(!READ_PORT){
- /* Ok, EEPROM is driving a 0 */
- E_DEBUG("Presence detected\n");
- if(Retries){
- E_DEBUG("Retries %d\n",Retries);
- }
- /* Make sure chip releases pin */
- udelay(PRESENCE_LOW_TIME);
- return 0;
- }
- Retries++;
- }
-
- printk(KERN_ERR"EEPROM did not respond when releasing reset\n");
-
- /* Make sure chip releases pin */
- udelay(PRESENCE_LOW_TIME);
-
- /* Set to idle again */
- set_idle();
-
- return(-EIO);
-}
-
-static u8
-read_byte(void){
- /* Read a single byte from EEPROM
- Read LSb first */
- int i;
- int Value;
- u8 Result=0;
-#ifndef CONFIG_SYS_IMMR
- u32 Flags;
-#endif
-
- E_DEBUG("Reading byte\n");
-
- for(i=0;i<8;i++){
- /* Small delay between pulses */
- udelay(1);
-
-#ifndef CONFIG_SYS_IMMR
- /* Disable irq */
- save_flags(Flags);
- cli();
-#endif
-
- /* Pull down pin short time to start read
- See page 26 in data sheet */
-
- WRITE_PORT(0);
- udelay(READ_LOW);
- WRITE_PORT(1);
-
- /* Wait for chip to drive pin */
- udelay(READ_TIMEOUT);
-
- Value = READ_PORT;
- if(Value)
- Value=1;
-
-#ifndef CONFIG_SYS_IMMR
- /* Enable irq */
- restore_flags(Flags);
-#endif
-
- /* Wait for chip to release pin */
- udelay(TOTAL_READ_LOW-READ_TIMEOUT);
-
- /* LSb first */
- Result|=Value<<i;
- }
-
- E_DEBUG("Read byte 0x%x\n",Result);
-
- return(Result);
-}
-
-static void
-write_byte(u8 Byte){
- /* Write a single byte to EEPROM
- Write LSb first */
- int i;
- int Value;
-#ifndef CONFIG_SYS_IMMR
- u32 Flags;
-#endif
-
- E_DEBUG("Writing byte 0x%x\n",Byte);
-
- for(i=0;i<8;i++){
- /* Small delay between pulses */
- udelay(1);
- Value = Byte&1;
-
-#ifndef CONFIG_SYS_IMMR
- /* Disable irq */
- save_flags(Flags);
- cli();
-#endif
-
- /* Pull down pin short time for a 1, long time for a 0
- See page 26 in data sheet */
-
- WRITE_PORT(0);
- if(Value){
- /* Write a 1 */
- udelay(WRITE_1_LOW);
- }
- else{
- /* Write a 0 */
- udelay(WRITE_0_LOW);
- }
-
- WRITE_PORT(1);
-
-#ifndef CONFIG_SYS_IMMR
- /* Enable irq */
- restore_flags(Flags);
-#endif
-
- if(Value)
- /* Wait for chip to read the 1 */
- udelay(TOTAL_WRITE_LOW-WRITE_1_LOW);
- Byte>>=1;
- }
-}
-
-int ee_do_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip ){
- /* Execute this command string, including
- giving reset and setting to idle after command
- if Rx_len is set, we read out data from EEPROM */
- int i;
-
- E_DEBUG("Command, Tx_len %d, Rx_len %d\n", Tx_len, Rx_len );
-
- if(do_reset()){
- /* Failed! */
- return(-EIO);
- }
-
- if(Send_skip)
- /* Always send SKIP_ROM first to tell chip we are sending a command,
- except when we read out rom data for chip */
- write_byte(SKIP_ROM);
-
- /* Always have Tx data */
- for(i=0;i<Tx_len;i++){
- write_byte(Tx[i]);
- }
-
- if(Rx_len){
- for(i=0;i<Rx_len;i++){
- Rx[i]=read_byte();
- }
- }
-
- set_idle();
-
- E_DEBUG("Command done\n");
-
- return(0);
-}
-
-int ee_init_data(void){
- int i;
- u8 Tx[10];
- int tmp;
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-
- while(0){
- tmp = 1-tmp;
- if(tmp)
- immap->im_ioport.iop_padat &= ~PA_FRONT_LED;
- else
- immap->im_ioport.iop_padat |= PA_FRONT_LED;
- udelay(1);
- }
-
- /* Set port to open drain to be able to read data from
- port without setting it to input */
- PORT_B_PAR &= ~PB_EEPROM;
- PORT_B_ODR |= PB_EEPROM;
- SET_PORT_B_OUTPUT(PB_EEPROM);
-
- /* Set idle mode */
- set_idle();
-
- /* Copy all User EEPROM data to scratchpad */
- for(i=0;i<USER_PAGES;i++){
- Tx[0]=RECALL_MEMORY;
- Tx[1]=EE_USER_PAGE_0+i;
- if(ee_do_command(Tx,2,NULL,0,TRUE)) return(-EIO);
- }
-
- /* Make sure chip doesnt store measurements in NVRAM */
- Tx[0]=WRITE_SCRATCHPAD;
- Tx[1]=0; /* Page */
- Tx[2]=9;
- if(ee_do_command(Tx,3,NULL,0,TRUE)) return(-EIO);
-
- Tx[0]=COPY_SCRATCHPAD;
- if(ee_do_command(Tx,2,NULL,0,TRUE)) return(-EIO);
-
- /* FIXME check status bit instead
- Could take 10 ms to store in EEPROM */
- for(i=0;i<10;i++){
- udelay(1000);
- }
-
- return(0);
-}
diff --git a/board/gth/ee_access.h b/board/gth/ee_access.h
deleted file mode 100644
index e847f2c..0000000
--- a/board/gth/ee_access.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* By Thomas.Lange@Corelatus.com 001025
-
- Definitions for EEPROM/VOLT METER DS2438 */
-
-#ifndef INCeeaccessh
-#define INCeeaccessh
-
-int ee_do_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip );
-int ee_init_data(void);
-int ee_crc_ok( u8 *Buffer, int Len, u8 Crc );
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#endif /* INCeeaccessh */
diff --git a/board/gth/ee_dev.h b/board/gth/ee_dev.h
deleted file mode 100644
index 3004b46..0000000
--- a/board/gth/ee_dev.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/* By Thomas.Lange@Corelatus.com 001025
- $Revision: 1.6 $
-
- Definitions for EEPROM/VOLT METER DS2438
- Copyright (C) 2000-2001 Corelatus AB */
-
-#ifndef INCeedevh
-#define INCeedevh
-
-#define E_DEBUG(fmt,args...) if( Debug ) printk(KERN_DEBUG"EE: " fmt, ##args)
-
-#define PORT_B_PAR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar
-#define PORT_B_ODR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr
-#define PORT_B_DIR ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir
-#define PORT_B_DAT ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat
-
-#define SET_PORT_B_INPUT(Mask) PORT_B_DIR &= ~(Mask)
-#define SET_PORT_B_OUTPUT(Mask) PORT_B_DIR |= Mask
-
-#define WRITE_PORT_B(Mask,Value) { \
- if (Value) PORT_B_DAT |= Mask; \
- else PORT_B_DAT &= ~(Mask); \
- }
-#define WRITE_PORT(Value) WRITE_PORT_B(PB_EEPROM,Value)
-
-#define READ_PORT (PORT_B_DAT&PB_EEPROM)
-
-/* 64 bytes chip */
-#define EE_CHIP_SIZE 64
-
-/* We use this resistor for measuring the current drain on 3.3V */
-#define CURRENT_RESISTOR 0.022
-
-/* microsecs
- Pull line down at least this long for reset pulse */
-#define RESET_LOW_TIME 490
-
-/* Read presence pulse after we release reset pulse */
-#define PRESENCE_TIMEOUT 100
-#define PRESENCE_LOW_TIME 200
-
-#define WRITE_0_LOW 80
-#define WRITE_1_LOW 2
-#define TOTAL_WRITE_LOW 80
-
-#define READ_LOW 2
-#define READ_TIMEOUT 10
-#define TOTAL_READ_LOW 80
-
-/*** Rom function commands ***/
-#define READ_ROM 0x33
-#define MATCH_ROM 0x55
-#define SKIP_ROM 0xCC
-#define SEARCH_ROM 0xF0
-
-
-/*** Memory_command_function ***/
-#define WRITE_SCRATCHPAD 0x4E
-#define READ_SCRATCHPAD 0xBE
-#define COPY_SCRATCHPAD 0x48
-#define RECALL_MEMORY 0xB8
-#define CONVERT_TEMP 0x44
-#define CONVERT_VOLTAGE 0xB4
-
-/* Chip is divided in 8 pages, 8 bytes each */
-
-#define EE_PAGE_SIZE 8
-
-/* All chip data we want are in page 0 */
-
-/* Bytes in page 0 */
-#define EE_P0_STATUS 0
-#define EE_P0_TEMP_LSB 1
-#define EE_P0_TEMP_MSB 2
-#define EE_P0_VOLT_LSB 3
-#define EE_P0_VOLT_MSB 4
-#define EE_P0_CURRENT_LSB 5
-#define EE_P0_CURRENT_MSB 6
-
-
-/* 40 byte user data is located at page 3-7 */
-#define EE_USER_PAGE_0 3
-#define USER_PAGES 5
-
-#endif /* INCeedevh */
diff --git a/board/gth/flash.c b/board/gth/flash.c
deleted file mode 100644
index 169270b..0000000
--- a/board/gth/flash.c
+++ /dev/null
@@ -1,649 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- * Protection Flags:
- */
-#define FLAG_PROTECT_SET 0x01
-#define FLAG_PROTECT_CLEAR 0x02
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size_b0, size_b1;
- int i;
-
- /*printf("faking");*/
-
- return(0x1fffff);
-
- /* Init: no FLASHes known */
- for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
- {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN)
- {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
-#if 0
- if (FLASH_BASE1_PRELIM != 0x0) {
- size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
- if (size_b1 > size_b0) {
- printf ("## ERROR: Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
- size_b1, size_b1<<20,size_b0, size_b0<<20);
-
- flash_info[0].flash_id = FLASH_UNKNOWN;
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[0].sector_count = -1;
- flash_info[1].sector_count = -1;
- flash_info[0].size = 0;
- flash_info[1].size = 0;
- return (0);
- }
- } else {
-#endif
- size_b1 = 0;
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
- memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
-
- /* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
- if (size_b1)
- {
- /* memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; */
-
- /* Re-do sizing to get full correct info */
- size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
- &flash_info[1]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[1]);
-#endif
- }
- else
- {
-/* memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- FIXME memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; */
-
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- }
-
- flash_info[0].size = size_b0;
- flash_info[1].size = size_b1;
-
- return (size_b0 + size_b1);
-}
-
-
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start adress table */
- if (info->flash_id & FLASH_BTYPE)
- {
- /* set sector offsets for bottom boot block type */
- for (i = 0; i < info->sector_count; i++)
- {
- info->start[i] = base + (i * 0x00040000);
- }
- }
- else
- {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- for (; i >= 0; i--)
- {
- info->start[i] = base + i * 0x00040000;
- }
- }
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
-
-#if 0
- case FLASH_AM040B:
- printf ("AM29F040B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM040T:
- printf ("AM29F040T (4 Mbit, top boot sect)\n");
- break;
-#endif
- case FLASH_AM400B:
- printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T:
- printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B:
- printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T:
- printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B:
- printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T:
- printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B:
- printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T:
- printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20,
- info->sector_count);
-
- printf (" Sector Start Addresses:");
-
- for (i=0; i<info->sector_count; ++i)
- {
- if ((i % 5) == 0)
- {
- printf ("\n ");
- }
-
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
-
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
-#if 0
- ulong base = (ulong)addr;
-#endif
- ulong value;
-
- /* Write auto select command: read Manufacturer ID */
-#if 0
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00900090;
-#else
- addr[0x0555] = 0xAAAAAAAA;
- addr[0x02AA] = 0x55555555;
- addr[0x0555] = 0x90909090;
-#endif
-
- value = addr[0];
-
- switch (value)
- {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
-
- value = addr[1]; /* device ID */
-
- switch (value)
- {
-#if 0
- case AMD_ID_F040B:
- info->flash_id += FLASH_AM040B;
- info->sector_count = 8;
- info->size = 0x00200000;
- break; /* => 2 MB */
-#endif
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
- case AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
-#if 0
- /* set up sector start adress table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-#else
- flash_get_offsets ((ulong)addr, &flash_info[0]);
-#endif
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++)
- {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (volatile unsigned long *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN)
- {
- addr = (volatile unsigned long *)info->start[0];
-#if 0
- *addr = 0x00F000F0; /* reset bank */
-#else
- *addr = 0xF0F0F0F0; /* reset bank */
-#endif
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
-#if 0
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
-#else
- addr[0x0555] = 0xAAAAAAAA;
- addr[0x02AA] = 0x55555555;
- addr[0x0555] = 0x80808080;
- addr[0x0555] = 0xAAAAAAAA;
- addr[0x02AA] = 0x55555555;
-#endif
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_long*)(info->start[sect]);
-#if 0
- addr[0] = 0x00300030;
-#else
- addr[0] = 0x30303030;
-#endif
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_long*)(info->start[l_sect]);
-#if 0
- while ((addr[0] & 0x00800080) != 0x00800080)
-#else
- while ((addr[0] & 0xFFFFFFFF) != 0xFFFFFFFF)
-#endif
- {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
-#if 0
- addr[0] = 0x00F000F0; /* reset bank */
-#else
- addr[0] = 0xF0F0F0F0; /* reset bank */
-#endif
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
-#if 0
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00A000A0;
-#else
- addr[0x0555] = 0xAAAAAAAA;
- addr[0x02AA] = 0x55555555;
- addr[0x0555] = 0xA0A0A0A0;
-#endif
-
- *((vu_long *)dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
-#if 0
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080))
-#else
- while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080))
-#endif
- {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/gth/gth.c b/board/gth/gth.c
deleted file mode 100644
index 4399db2..0000000
--- a/board/gth/gth.c
+++ /dev/null
@@ -1,595 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Adapted from FADS and other board config files to GTH by thomas@corelatus.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <watchdog.h>
-#include <mpc8xx.h>
-#include "ee_access.h"
-#include "ee_dev.h"
-
-#ifdef CONFIG_BDM
-#undef printf
-#define printf(a,...) /* nothing */
-#endif
-
-
-int checkboard (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- int Id = 0;
- int Rev = 0;
- u32 Pbdat;
-
- puts ("Board: ");
-
- /* Turn on leds and setup for reading rev and id */
-
-#define PB_OUTS (PB_BLUE_LED|PB_ID_GND)
-#define PB_INS (PB_ID_0|PB_ID_1|PB_ID_2|PB_ID_3|PB_REV_1|PB_REV_0)
-
- immap->im_cpm.cp_pbpar &= ~(PB_OUTS | PB_INS);
-
- immap->im_cpm.cp_pbdir &= ~PB_INS;
-
- immap->im_cpm.cp_pbdir |= PB_OUTS;
- immap->im_cpm.cp_pbodr |= PB_OUTS;
- immap->im_cpm.cp_pbdat &= ~PB_OUTS;
-
- /* Hold 100 Mbit in reset until fpga is loaded */
- immap->im_ioport.iop_pcpar &= ~PC_ENET100_RESET;
- immap->im_ioport.iop_pcdir |= PC_ENET100_RESET;
- immap->im_ioport.iop_pcso &= ~PC_ENET100_RESET;
- immap->im_ioport.iop_pcdat &= ~PC_ENET100_RESET;
-
- /* Turn on front led to show that we are alive */
- immap->im_ioport.iop_papar &= ~PA_FRONT_LED;
- immap->im_ioport.iop_padir |= PA_FRONT_LED;
- immap->im_ioport.iop_paodr |= PA_FRONT_LED;
- immap->im_ioport.iop_padat &= ~PA_FRONT_LED;
-
- Pbdat = immap->im_cpm.cp_pbdat;
-
- if (!(Pbdat & PB_ID_0))
- Id += 1;
- if (!(Pbdat & PB_ID_1))
- Id += 2;
- if (!(Pbdat & PB_ID_2))
- Id += 4;
- if (!(Pbdat & PB_ID_3))
- Id += 8;
-
- if (Pbdat & PB_REV_0)
- Rev += 1;
- if (Pbdat & PB_REV_1)
- Rev += 2;
-
- /* Turn ID off since we dont need it anymore */
- immap->im_cpm.cp_pbdat |= PB_ID_GND;
-
- printf ("GTH board, rev %d, id=0x%01x\n", Rev, Id);
- return 0;
-}
-
-#define _NOT_USED_ 0xffffffff
-const uint sdram_table[] = {
- /* Single read, offset 0 */
- 0x0f3dfc04, 0x0eefbc04, 0x01bf7c04, 0x0feafc00,
- 0x1fb5fc45, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* Burst read, Offset 0x8, 4 reads */
- 0x0f3dfc04, 0x0eefbc04, 0x00bf7c04, 0x00ffec00,
- 0x00fffc00, 0x01eafc00, 0x1fb5fc00, 0xfffffc45,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* Not used part of burst read is used for MRS, Offset 0x14 */
- 0xefeabc34, 0x1fb57c34, 0xfffffc05, _NOT_USED_,
- /* _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, */
-
- /* Single write, Offset 0x18 */
- 0x0f3dfc04, 0x0eebbc00, 0x01a27c04, 0x1fb5fc45,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* Burst write, Offset 0x20. 4 writes */
- 0x0f3dfc04, 0x0eebbc00, 0x00b77c00, 0x00fffc00,
- 0x00fffc00, 0x01eafc04, 0x1fb5fc45, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* Not used part of burst write is used for precharge, Offset 0x2C */
- 0x0ff5fc04, 0xfffffc05, _NOT_USED_, _NOT_USED_,
- /* _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, */
-
- /* Period timer service. Offset 0x30. Refresh. Wait at least 70 ns after refresh command */
- 0x1ffd7c04, 0xfffffc04, 0xfffffc04, 0xfffffc05,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* Exception, Offset 0x3C */
- 0xfffffc04, 0xfffffc05, _NOT_USED_, _NOT_USED_
-};
-
-const uint fpga_table[] = {
- /* Single read, offset 0 */
- 0x0cffec04, 0x00ffec04, 0x00ffec04, 0x00ffec04,
- 0x00fffc04, 0x00fffc00, 0x00ffec04, 0xffffec05,
-
- /* Burst read, Offset 0x8 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* Single write, Offset 0x18 */
- 0x0cffec04, 0x00ffec04, 0x00ffec04, 0x00ffec04,
- 0x00fffc04, 0x00fffc00, 0x00ffec04, 0xffffec05,
-
- /* Burst write, Offset 0x20. */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* Period timer service. Offset 0x30. */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* Exception, Offset 0x3C */
- 0xfffffc04, 0xfffffc05, _NOT_USED_, _NOT_USED_
-};
-
-int _initsdram (uint base, uint * noMbytes)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *mc = &immap->im_memctl;
- volatile u32 *memptr;
-
- mc->memc_mptpr = MPTPR_PTP_DIV16; /* (16-17) */
-
- /* SDRAM in UPMA
-
- GPL_0 is connected instead of A19 to SDRAM.
- According to table 16-17, AMx should be 001, i.e. type 1
- and GPL_0 should hold address A10 when multiplexing */
-
- mc->memc_mamr = (0x2E << MAMR_PTA_SHIFT) | MAMR_PTAE | MAMR_AMA_TYPE_1 | MAMR_G0CLA_A10 | MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X; /* (16-13) */
-
- upmconfig (UPMA, (uint *) sdram_table,
- sizeof (sdram_table) / sizeof (uint));
-
- /* Perform init of sdram ( Datasheet Page 9 )
- Precharge */
- mc->memc_mcr = 0x8000212C; /* run upm a at 0x2C (16-15) */
-
- /* Run 2 refresh cycles */
- mc->memc_mcr = 0x80002130; /* run upm a at 0x30 (16-15) */
- mc->memc_mcr = 0x80002130; /* run upm a at 0x30 (16-15) */
-
- /* Set Mode register */
- mc->memc_mar = 0x00000088; /* set mode register (address) to 0x022 (16-17) */
- /* Lower 2 bits are not connected to chip */
- mc->memc_mcr = 0x80002114; /* run upm a at 0x14 (16-15) */
-
- /* CS1, base 0x0000000 - 64 Mbyte, use UPM A */
- mc->memc_or1 = 0xfc000000 | OR_CSNT_SAM;
- mc->memc_br1 = BR_MS_UPMA | BR_V; /* SDRAM base always 0 */
-
- /* Test if we really have 64 MB SDRAM */
- memptr = (u32 *) 0;
- *memptr = 0;
-
- memptr = (u32 *) 0x2000000; /* First u32 in upper 32 MB */
- *memptr = 0x12345678;
-
- memptr = (u32 *) 0;
- if (*memptr == 0x12345678) {
- /* Wrapped, only have 32 MB */
- mc->memc_or1 = 0xfe000000 | OR_CSNT_SAM;
- *noMbytes = 32;
- } else {
- /* 64 MB */
- *noMbytes = 64;
- }
-
- /* Setup FPGA in UPMB */
- upmconfig (UPMB, (uint *) fpga_table,
- sizeof (fpga_table) / sizeof (uint));
-
- /* Enable UPWAITB */
- mc->memc_mbmr = MBMR_GPL_B4DIS; /* (16-13) */
-
- /* CS2, base FPGA_2_BASE - 4 MByte, use UPM B 32 Bit */
- mc->memc_or2 = 0xffc00000 | OR_BI;
- mc->memc_br2 = FPGA_2_BASE | BR_MS_UPMB | BR_V;
-
- /* CS3, base FPGA_3_BASE - 4 MByte, use UPM B 16 bit */
- mc->memc_or3 = 0xffc00000 | OR_BI;
- mc->memc_br3 = FPGA_3_BASE | BR_MS_UPMB | BR_V | BR_PS_16;
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-void _sdramdisable (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- memctl->memc_br1 = 0x00000000;
-
- /* maybe we should turn off upmb here or something */
-}
-
-/* ------------------------------------------------------------------------- */
-
-int initsdram (uint base, uint * noMbytes)
-{
- *noMbytes = 32;
-
-#ifdef CONFIG_START_IN_RAM
- /* SDRAM is already setup. Dont touch it */
- return 0;
-#else
-
- if (!_initsdram (base, noMbytes)) {
-
- return 0;
- } else {
- _sdramdisable ();
-
- return -1;
- }
-#endif
-}
-
-phys_size_t initdram (int board_type)
-{
- u32 *i;
- u32 j;
- u32 k;
-
- /* GTH only have SDRAM */
- uint sdramsz;
-
- if (!initsdram (0x00000000, &sdramsz)) {
- printf ("(%u MB SDRAM) ", sdramsz);
- } else {
- /********************************
- *SDRAM ERROR, HALT PROCESSOR
- *********************************/
- printf ("SDRAM ERROR\n");
- while (1);
- }
-
-#ifndef CONFIG_START_IN_RAM
-
-#define U32_S ((sdramsz<<18)-1)
-
-#if 1
- /* Do a simple memory test */
- for (i = (u32 *) 0, j = 0; (u32) i < U32_S; i += 2, j += 2) {
- *i = j + (j << 17);
- *(i + 1) = ~(j + (j << 18));
- }
-
- WATCHDOG_RESET ();
-
- printf (".");
-
- for (i = (u32 *) 0, j = 0; (u32) i < U32_S; i += 2, j += 2) {
- k = *i;
- if (k != (j + (j << 17))) {
- printf ("Mem test error, i=0x%x, 0x%x\n, 0x%x", (u32) i, j, k);
- while (1);
- }
- k = *(i + 1);
- if (k != ~(j + (j << 18))) {
- printf ("Mem test error(+1), i=0x%x, 0x%x\n, 0x%x",
- (u32) i + 1, j, k);
- while (1);
- }
- }
-#endif
-
- WATCHDOG_RESET ();
-
- /* Clear memory */
- for (i = (u32 *) 0; (u32) i < U32_S; i++) {
- *i = 0;
- }
-#endif /* !start in ram */
-
- WATCHDOG_RESET ();
-
- return (sdramsz << 20);
-}
-
-#define POWER_OFFSET 0xF0000
-#define SW_WATCHDOG_REASON 13
-
-#define BOOTDATA_OFFSET 0xF8000
-#define MAX_ATTEMPTS 5
-
-#define FAILSAFE_BOOT 1
-#define SYSTEM_BOOT 2
-
-#define WRITE_FLASH16(a, d) \
-do \
-{ \
- *((volatile u16 *) (a)) = (d);\
- } while(0)
-
-static void write_bootdata (volatile u16 * addr, u8 System, u8 Count)
-{
- u16 data;
- volatile u16 *flash = (u16 *) (CONFIG_SYS_FLASH_BASE);
-
- if ((System != FAILSAFE_BOOT) & (System != SYSTEM_BOOT)) {
- printf ("Invalid system data %u, setting failsafe\n", System);
- System = FAILSAFE_BOOT;
- }
-
- if ((Count < 1) | (Count > MAX_ATTEMPTS)) {
- printf ("Invalid boot count %u, setting 1\n", Count);
- Count = 1;
- }
-
- if (System == FAILSAFE_BOOT) {
- printf ("Setting failsafe boot in flash\n");
- } else {
- printf ("Setting system boot in flash\n");
- }
- printf ("Boot attempt %d\n", Count);
-
- data = (System << 8) | Count;
- /* AMD 16 bit */
- WRITE_FLASH16 (&flash[0x555], 0xAAAA);
- WRITE_FLASH16 (&flash[0x2AA], 0x5555);
- WRITE_FLASH16 (&flash[0x555], 0xA0A0);
-
- WRITE_FLASH16 (addr, data);
-}
-
-static void maybe_update_restart_reason (volatile u32 * addr32)
-{
- /* Update addr if sw wd restart */
- volatile u16 *flash = (u16 *) (CONFIG_SYS_FLASH_BASE);
- volatile u16 *addr_16 = (u16 *) addr32;
- u32 rsr;
-
- /* Dont reset register now */
- rsr = ((volatile immap_t *) CONFIG_SYS_IMMR)->im_clkrst.car_rsr;
-
- rsr >>= 24;
-
- if (rsr & 0x10) {
- /* Was really a sw wd restart, update reason */
-
- printf ("Last restart by software watchdog\n");
-
- /* AMD 16 bit */
- WRITE_FLASH16 (&flash[0x555], 0xAAAA);
- WRITE_FLASH16 (&flash[0x2AA], 0x5555);
- WRITE_FLASH16 (&flash[0x555], 0xA0A0);
-
- WRITE_FLASH16 (addr_16, 0);
-
- udelay (1000);
-
- WATCHDOG_RESET ();
-
- /* AMD 16 bit */
- WRITE_FLASH16 (&flash[0x555], 0xAAAA);
- WRITE_FLASH16 (&flash[0x2AA], 0x5555);
- WRITE_FLASH16 (&flash[0x555], 0xA0A0);
-
- WRITE_FLASH16 (addr_16 + 1, SW_WATCHDOG_REASON);
-
- }
-}
-
-static void check_restart_reason (void)
-{
- /* Update restart reason if sw watchdog was
- triggered */
-
- int i;
- volatile u32 *raddr;
-
- raddr = (u32 *) (CONFIG_SYS_FLASH_BASE + POWER_OFFSET);
-
- if (*raddr == 0xFFFFFFFF) {
- /* Nothing written */
- maybe_update_restart_reason (raddr);
- } else {
- /* Search for latest written reason */
- i = 0;
- while ((*(raddr + 2) != 0xFFFFFFFF) & (i < 2000)) {
- raddr += 2;
- i++;
- }
- if (i >= 2000) {
- /* Whoa, dont write any more */
- printf ("*** No free restart reason found ***\n");
- } else {
- /* Check if written */
- if (*raddr == 0) {
- /* Erased by kernel, no new reason written */
- maybe_update_restart_reason (raddr + 2);
- }
- }
- }
-}
-
-static void check_boot_tries (void)
-{
- /* Count the number of boot attemps
- switch system if too many */
-
- int i;
- volatile u16 *addr;
- volatile u16 data;
- int failsafe = 1;
- u8 system;
- u8 count;
-
- addr = (u16 *) (CONFIG_SYS_FLASH_BASE + BOOTDATA_OFFSET);
-
- if (*addr == 0xFFFF) {
- printf ("*** No bootdata exists. ***\n");
- write_bootdata (addr, FAILSAFE_BOOT, 1);
- } else {
- /* Search for latest written bootdata */
- i = 0;
- while ((*(addr + 1) != 0xFFFF) & (i < 8000)) {
- addr++;
- i++;
- }
- if (i >= 8000) {
- /* Whoa, dont write any more */
- printf ("*** No bootdata found. Not updating flash***\n");
- } else {
- /* See how many times we have tried to boot real system */
- data = *addr;
- system = data >> 8;
- count = data & 0xFF;
- if ((system != SYSTEM_BOOT) & (system != FAILSAFE_BOOT)) {
- printf ("*** Wrong system %d\n", system);
- system = FAILSAFE_BOOT;
- count = 1;
- } else {
- switch (count) {
- case 0:
- case 1:
- case 2:
- case 3:
- case 4:
- /* Try same system again if needed */
- count++;
- break;
-
- case 5:
- /* Switch system and reset tries */
- count = 1;
- system = 3 - system;
- printf ("***Too many boot attempts, switching system***\n");
- break;
- default:
- /* Switch system, start over and hope it works */
- printf ("***Unexpected data on addr 0x%x, %u***\n",
- (u32) addr, data);
- count = 1;
- system = 3 - system;
- }
- }
- write_bootdata (addr + 1, system, count);
- if (system == SYSTEM_BOOT) {
- failsafe = 0;
- }
- }
- }
- if (failsafe) {
- printf ("Booting failsafe system\n");
- setenv ("bootargs", "panic=1 root=/dev/hda7");
- setenv ("bootcmd", "disk 100000 0:5;bootm 100000");
- } else {
- printf ("Using normal system\n");
- setenv ("bootargs", "panic=1 root=/dev/hda4");
- setenv ("bootcmd", "disk 100000 0:2;bootm 100000");
- }
-}
-
-int misc_init_r (void)
-{
- u8 Rx[80];
- u8 Tx[5];
- int page;
- int read = 0;
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- /* Kill fpga */
- immap->im_ioport.iop_papar &= ~(PA_FL_CONFIG | PA_FL_CE);
- immap->im_ioport.iop_padir |= (PA_FL_CONFIG | PA_FL_CE);
- immap->im_ioport.iop_paodr &= ~(PA_FL_CONFIG | PA_FL_CE);
-
- /* Enable fpga, active low */
- immap->im_ioport.iop_padat &= ~PA_FL_CE;
-
- /* Start configuration */
- immap->im_ioport.iop_padat &= ~PA_FL_CONFIG;
- udelay (2);
-
- immap->im_ioport.iop_padat |= (PA_FL_CONFIG | PA_FL_CE);
-
- /* Check if we need to boot failsafe system */
- check_boot_tries ();
-
- /* Check if we need to update restart reason */
- check_restart_reason ();
-
- if (ee_init_data ()) {
- printf ("EEPROM init failed\n");
- return (0);
- }
-
- /* Read the pages where ethernet address is stored */
-
- for (page = EE_USER_PAGE_0; page <= EE_USER_PAGE_0 + 2; page++) {
- /* Copy from nvram to scratchpad */
- Tx[0] = RECALL_MEMORY;
- Tx[1] = page;
- if (ee_do_command (Tx, 2, NULL, 0, TRUE)) {
- printf ("EE user page %d recall failed\n", page);
- return (0);
- }
-
- Tx[0] = READ_SCRATCHPAD;
- if (ee_do_command (Tx, 2, Rx + read, 9, TRUE)) {
- printf ("EE user page %d read failed\n", page);
- return (0);
- }
- /* Crc in 9:th byte */
- if (!ee_crc_ok (Rx + read, 8, *(Rx + read + 8))) {
- printf ("EE read failed, page %d. CRC error\n", page);
- return (0);
- }
- read += 8;
- }
-
- /* Add eos after eth addr */
- Rx[17] = 0;
-
- printf ("Ethernet addr read from eeprom: %s\n\n", Rx);
-
- if ((Rx[2] != ':') |
- (Rx[5] != ':') |
- (Rx[8] != ':') | (Rx[11] != ':') | (Rx[14] != ':')) {
- printf ("*** ethernet addr invalid, using default ***\n");
- } else {
- setenv ("ethaddr", (char *)Rx);
- }
- return (0);
-}
diff --git a/board/gth/pcmcia.c b/board/gth/pcmcia.c
deleted file mode 100644
index a4db16d..0000000
--- a/board/gth/pcmcia.c
+++ /dev/null
@@ -1,93 +0,0 @@
-#include <common.h>
-#include <mpc8xx.h>
-#include <pcmcia.h>
-
-#undef CONFIG_PCMCIA
-
-#if defined(CONFIG_CMD_PCMCIA)
-#define CONFIG_PCMCIA
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
-#define CONFIG_PCMCIA
-#endif
-
-#ifdef CONFIG_PCMCIA
-
-#define PCMCIA_BOARD_MSG "GTH COMPACT FLASH"
-
-int pcmcia_voltage_set (int slot, int vcc, int vpp)
-{ /* Do nothing */
- return 0;
-}
-
-int pcmcia_hardware_enable (int slot)
-{
- volatile immap_t *immap;
- volatile cpm8xx_t *cp;
- volatile pcmconf8xx_t *pcmp;
- volatile sysconf8xx_t *sysp;
- uint reg, mask;
-
- debug ("hardware_enable: GTH Slot %c\n", 'A' + slot);
-
- immap = (immap_t *) CONFIG_SYS_IMMR;
- sysp = (sysconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_siu_conf));
- pcmp = (pcmconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_pcmcia));
- cp = (cpm8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_cpm));
-
- /* clear interrupt state, and disable interrupts */
- pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
- pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_);
-
- /*
- * Disable interrupts, DMA, and PCMCIA buffers
- * (isolate the interface) and assert RESET signal
- */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = 0;
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX (_slot_) = reg;
- udelay (500);
-
- /*
- * Make sure there is a card in the slot,
- * then configure the interface.
- */
- udelay (10000);
- debug ("[%d] %s: PIPR(%p)=0x%x\n",
- __LINE__, __FUNCTION__,
- &(pcmp->pcmc_pipr), pcmp->pcmc_pipr);
- if (pcmp->pcmc_pipr & 0x98000000) {
- printf (" No Card found\n");
- return (1);
- }
-
- mask = PCMCIA_VS1 (slot) | PCMCIA_VS2 (slot);
- reg = pcmp->pcmc_pipr;
- debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
- reg,
- (reg & PCMCIA_VS1 (slot)) ? "n" : "ff",
- (reg & PCMCIA_VS2 (slot)) ? "n" : "ff");
-
- debug ("Enable PCMCIA buffers and stop RESET\n");
- reg = PCMCIA_PGCRX (_slot_);
- reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX (_slot_) = reg;
-
- udelay (250000); /* some cards need >150 ms to come up :-( */
-
- debug ("# hardware_enable done\n");
-
- return 0;
-}
-#if defined(CONFIG_CMD_PCMCIA)
-int pcmcia_hardware_disable(int slot)
-{
- return 0; /* No hardware to disable */
-}
-#endif
-
-#endif /* CONFIG_PCMCIA */
diff --git a/board/gth/u-boot.lds b/board/gth/u-boot.lds
deleted file mode 100644
index 4145a91..0000000
--- a/board/gth/u-boot.lds
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/powerpc/cpu/mpc8xx/start.o(.text)
- *(.text)
- common/env_embedded.o(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/boards.cfg b/boards.cfg
index 8aab169..b82f530 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -143,7 +143,6 @@ EP88x powerpc mpc8xx ep88x
ETX094 powerpc mpc8xx etx094
FLAGADM powerpc mpc8xx flagadm
GENIETV powerpc mpc8xx genietv
-GTH powerpc mpc8xx gth
hermes powerpc mpc8xx
IP860 powerpc mpc8xx ip860
LANTEC powerpc mpc8xx lantec
diff --git a/common/env_common.c b/common/env_common.c
index 82e4936..460309b 100644
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -227,7 +227,7 @@ void env_relocate (void)
#endif
if (gd->env_valid == 0) {
-#if defined(CONFIG_GTH) || defined(CONFIG_ENV_IS_NOWHERE) /* Environment not changable */
+#if defined(CONFIG_ENV_IS_NOWHERE) /* Environment not changable */
puts ("Using default environment\n\n");
#else
puts ("*** Warning - bad CRC, using default environment\n\n");
diff --git a/include/commproc.h b/include/commproc.h
index 9d28abc..762238e 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -828,38 +828,6 @@ typedef struct scc_enet {
#endif /* CONFIG_GENIETV */
-/*** GTH ******************************************************/
-
-#ifdef CONFIG_GTH
-#ifdef CONFIG_FEC_ENET
-#define FEC_ENET /* use FEC for EThernet */
-#endif /* CONFIG_FEC_ETHERNET */
-
-/* This ENET stuff is for GTH 10 Mbit ( SCC ) */
-#define PROFF_ENET PROFF_SCC1
-#define CPM_CR_ENET CPM_CR_CH_SCC1
-#define SCC_ENET 0
-
-#define PA_ENET_RXD ((ushort)0x0001) /* PA15 */
-#define PA_ENET_TXD ((ushort)0x0002) /* PA14 */
-#define PA_ENET_TCLK ((ushort)0x0800) /* PA4 */
-#define PA_ENET_RCLK ((ushort)0x0400) /* PA5 */
-
-#define PB_ENET_TENA ((uint)0x00001000) /* PB19 */
-
-#define PC_ENET_CLSN ((ushort)0x0010) /* PC11 */
-#define PC_ENET_RENA ((ushort)0x0020) /* PC10 */
-
-/* NOTE. This is reset for 10Mbit port only */
-#define PC_ENET_RESET ((ushort)0x0100) /* PC 7 */
-
-#define SICR_ENET_MASK ((uint)0x000000ff)
-
-/* TCLK PA4 -->CLK4, RCLK PA5 -->CLK3 */
-#define SICR_ENET_CLKRT ((uint)0x00000037)
-
-#endif /* CONFIG_GTH */
-
/*** HERMES-PRO ******************************************************/
/* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */
diff --git a/include/configs/GTH.h b/include/configs/GTH.h
deleted file mode 100644
index c2cf852..0000000
--- a/include/configs/GTH.h
+++ /dev/null
@@ -1,389 +0,0 @@
-/*
- * Parameters for GTH board
- * Based on FADS860T
- * by thomas.lange@corelatus.com
-
- * A collection of structures, addresses, and values associated with
- * the Motorola 860T FADS board. Copied from the MBX stuff.
- * Magnus Damm added defines for 8xxrom and extended bd_info.
- * Helmut Buchsbaum added bitvalues for BCSRx
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- */
-
-/*
- * ff000000 -> ff00ffff : IMAP internal in the cpu
- * e0000000 -> ennnnnnn : pcmcia
- * 98000000 -> 983nnnnn : FPGA 4MB
- * 90000000 -> 903nnnnn : FPGA 4MB
- * 80000000 -> 80nnnnnn : flash connected to CS0, final ( real ) location
- * 00000000 -> nnnnnnnn : sdram
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#include <mpc8xx_irq.h>
-
-#define CONFIG_MPC860 1
-#define CONFIG_MPC860T 1
-#define CONFIG_GTH 1
-
-#define CONFIG_MISC_INIT_R 1
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-
-#define MPC8XX_FACT 3 /* Multiply by 3 */
-#define MPC8XX_XIN 16384000 /* 16.384 MHz */
-#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
-
-#define CONFIG_BOOTDELAY 1 /* autoboot after 0 seconds */
-
-#define CONFIG_ENV_OVERWRITE 1 /* Allow change of ethernet address */
-
-#define CONFIG_BOOT_RETRY_TIME 5 /* Retry boot in 5 secs */
-
-#define CONFIG_RESET_TO_RETRY 1 /* If timeout waiting for command, perform a reset */
-
-/* Only interrupt boot if space is pressed */
-/* If a long serial cable is connected but */
-/* other end is dead, garbage will be read */
-#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT \
- "Press space to abort autoboot in %d second\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR "d"
-#define CONFIG_AUTOBOOT_STOP_STR " "
-
-#if 0
-/* Net boot */
-/* Loads a tftp image and starts it */
-#define CONFIG_BOOTCOMMAND "bootp;bootm 100000" /* autoboot command */
-#define CONFIG_BOOTARGS "panic=1"
-#else
-/* Compact flash boot */
-#define CONFIG_BOOTARGS "panic=1 root=/dev/hda7"
-#define CONFIG_BOOTCOMMAND "disk 100000 0:5;bootm 100000"
-#endif
-
-/* Enable watchdog */
-#define CONFIG_WATCHDOG 1
-
-/* choose SCC1 ethernet (10BASET on motherboard)
- * or FEC ethernet (10/100 on daughterboard)
- */
-#if 1
-#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
-#undef CONFIG_FEC_ENET /* disable FEC ethernet */
-#define CONFIG_SYS_DISCOVER_PHY
-#else
-#undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
-#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
-#define CONFIG_SYS_DISCOVER_PHY
-#endif
-#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
-#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
-#endif
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_IDE
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_PROMPT "=>" /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
-
-/* Default location to load data from net */
-#define CONFIG_SYS_LOAD_ADDR 0x100000
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400 }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-#define CONFIG_SYS_IMMR_SIZE ((uint)(64 * 1024))
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#define CONFIG_SYS_FLASH_BASE 0x80000000
-
-#define CONFIG_SYS_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
-
-#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
-
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-
-#define CONFIG_SYS_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#undef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_ENV_OFFSET 0x000E0000
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-#define CONFIG_ENV_SECT_SIZE 0x50000 /* see README - env sector total size */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-
-/*FIXME dont use for now */
-/*#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-/*#define CONFIG_SYS_RTCSC (RTCSC_RTF) */
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-/* PITE */
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control (15-29)
- */
-#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
- PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-
-/* FIXME check values */
-#define SCCR_MASK SCCR_EBDF11
-#define CONFIG_SYS_SCCR (SCCR_TBS|SCCR_RTSEL|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
-
- /*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-/* Because of the way the 860 starts up and assigns CS0 the
-* entire address space, we have to set the memory controller
-* differently. Normally, you write the option register
-* first, and then enable the chip select by writing the
-* base register. For CS0, you must write the base register
-* first, followed by the option register.
-*/
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-/* the other CS:s are determined by looking at parameters in BCSRx */
-
-#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */
-
-#define CONFIG_SYS_REMAP_OR_AM 0xFF800000 /* 4 MB OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xFF800000 /* OR addr mask */
-
-#define FPGA_2_BASE 0x90000000
-#define FPGA_3_BASE 0x98000000
-
-/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-
-
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) /* 1 Mbyte until detected and only 1 Mbyte is needed*/
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16 )
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
-#define CONFIG_ETHADDR DE:AD:BE:EF:00:01 /* Ethernet address */
-
-#ifdef CONFIG_MPC860T
-
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
-
-#endif /* CONFIG_MPC860T */
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS 0
-
-/* Machine type
-*/
-#define _MACH_8xx (_MACH_gth)
-
-#ifdef CONFIG_MPC860
-#define PCMCIA_SLOT_A 1
-#define CONFIG_PCMCIA_SLOT_A 1
-#endif
-
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-
-#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
-
-#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ /* Force it - dont measure it */
-
-#define PA_FRONT_LED ((u16)0x4) /* PA 13 */
-#define PA_FL_CONFIG ((u16)0x20) /* PA 10 */
-#define PA_FL_CE ((u16)0x1000) /* PA 3 */
-
-#define PB_ID_GND ((u32)1) /* PB 31 */
-#define PB_REV_1 ((u32)2) /* PB 30 */
-#define PB_REV_0 ((u32)4) /* PB 29 */
-#define PB_BLUE_LED ((u32)0x400) /* PB 21 */
-#define PB_EEPROM ((u32)0x800) /* PB 20 */
-#define PB_ID_3 ((u32)0x2000) /* PB 18 */
-#define PB_ID_2 ((u32)0x4000) /* PB 17 */
-#define PB_ID_1 ((u32)0x8000) /* PB 16 */
-#define PB_ID_0 ((u32)0x10000) /* PB 15 */
-
-/* NOTE. This is reset for 100Mbit port only */
-#define PC_ENET100_RESET ((ushort)0x0080) /* PC 8 */
-
-#endif /* __CONFIG_H */
generated by cgit v1.1 at 2024-11-22 05:58:54 +0000