summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Makefile15
-rw-r--r--board/freescale/mpc8360emds/mpc8360emds.c73
-rw-r--r--common/cmd_fdt.c23
-rw-r--r--cpu/mpc83xx/cpu_init.c261
-rw-r--r--drivers/i2c/fsl_i2c.c105
-rw-r--r--drivers/qe/uccf.h1
-rw-r--r--drivers/qe/uec.h4
-rw-r--r--drivers/qe/uec_phy.c15
-rw-r--r--include/configs/MPC8313ERDB.h3
-rw-r--r--include/configs/MPC8315ERDB.h3
-rw-r--r--include/configs/MPC8323ERDB.h3
-rw-r--r--include/configs/MPC832XEMDS.h3
-rw-r--r--include/configs/MPC8349EMDS.h3
-rw-r--r--include/configs/MPC8349ITX.h3
-rw-r--r--include/configs/MPC8360EMDS.h9
-rw-r--r--include/configs/MPC8360ERDK.h3
-rw-r--r--include/configs/MPC837XEMDS.h3
-rw-r--r--include/configs/MPC837XERDB.h3
-rw-r--r--include/configs/MVBLM7.h3
-rw-r--r--include/configs/SIMPC8313.h4
-rw-r--r--include/configs/TQM834x.h3
-rw-r--r--include/configs/kmeter1.h4
-rw-r--r--include/configs/sbc8349.h18
-rw-r--r--include/configs/vme8349.h3
24 files changed, 376 insertions, 192 deletions
diff --git a/Makefile b/Makefile
index 9c5b2a5..8ab864d 100644
--- a/Makefile
+++ b/Makefile
@@ -2403,20 +2403,7 @@ MVBLM7_config: unconfig
sbc8349_config \
sbc8349_PCI_33_config \
sbc8349_PCI_66_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _PCI_,$@)" ] ; then \
- $(XECHO) -n "... PCI HOST at " ; \
- echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
- fi ; \
- if [ "$(findstring _33_,$@)" ] ; then \
- $(XECHO) -n "33MHz... " ; \
- echo "#define PCI_33M" >>$(obj)include/config.h ; \
- fi ; \
- if [ "$(findstring _66_,$@)" ] ; then \
- $(XECHO) -n "66MHz... " ; \
- echo "#define PCI_66M" >>$(obj)include/config.h ; \
- fi ;
- @$(MKCONFIG) -a sbc8349 ppc mpc83xx sbc8349
+ @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
SIMPC8313_LP_config \
SIMPC8313_SP_config: unconfig
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index dc4dbd3..d4ba043 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -21,12 +21,16 @@
#endif
#include <spd_sdram.h>
#include <asm/mmu.h>
+#include <asm/io.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
+#include <hwconfig.h>
+#include <fdt_support.h>
#if defined(CONFIG_PQ_MDS_PIB)
#include "../common/pq-mds-pib.h"
#endif
+#include "../../../drivers/qe/uec.h"
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* GETH1 */
@@ -89,11 +93,19 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
};
-int board_early_init_f(void)
+/* Handle "mpc8360ea rev.2.1 erratum 2: RGMII Timing"? */
+static int board_handle_erratum2(void)
{
+ const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
+ return REVID_MAJOR(immr->sysconf.spridr) == 2 &&
+ REVID_MINOR(immr->sysconf.spridr) == 1;
+}
+
+int board_early_init_f(void)
+{
const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
/* Enable flash write */
bcsr[0xa] &= ~0x04;
@@ -105,6 +117,21 @@ int board_early_init_f(void)
/* Enable second UART */
bcsr[0x9] &= ~0x01;
+ if (board_handle_erratum2()) {
+ void *immap = (immap_t *)(CONFIG_SYS_IMMR + 0x14a8);
+
+ /*
+ * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
+ * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
+ */
+ setbits_be32(immap, 0x0c003000);
+
+ /*
+ * IMMR + 0x14AC[20:27] = 10101010
+ * (data delay for both UCC's)
+ */
+ clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
+ }
return 0;
}
@@ -116,6 +143,28 @@ int board_early_init_r(void)
return 0;
}
+#ifdef CONFIG_UEC_ETH
+static uec_info_t uec_info[] = {
+#ifdef CONFIG_UEC_ETH1
+ STD_UEC_INFO(1),
+#endif
+#ifdef CONFIG_UEC_ETH2
+ STD_UEC_INFO(2),
+#endif
+};
+
+int board_eth_init(bd_t *bd)
+{
+ if (board_handle_erratum2()) {
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(uec_info); i++)
+ uec_info[i].enet_interface = ENET_1000_RGMII_RXID;
+ }
+ return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info));
+}
+#endif /* CONFIG_UEC_ETH */
+
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
@@ -126,6 +175,7 @@ phys_size_t initdram(int board_type)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
+ u32 lbc_sdram_size;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
return -1;
@@ -147,7 +197,9 @@ phys_size_t initdram(int board_type)
/*
* Initialize SDRAM if it is on local bus.
*/
- msize += sdram_init(msize * 1024 * 1024);
+ lbc_sdram_size = sdram_init(msize * 1024 * 1024);
+ if (!msize)
+ msize = lbc_sdram_size;
/* return total bus SDRAM size(bytes) -- DDR */
return (msize * 1024 * 1024);
@@ -307,21 +359,28 @@ static int sdram_init(unsigned int base) { return 0; }
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+static void ft_board_fixup_qe_usb(void *blob, bd_t *bd)
{
- const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ if (!hwconfig_subarg_cmp("qe_usb", "mode", "peripheral"))
+ return;
+
+ do_fixup_by_compat(blob, "fsl,mpc8323-qe-usb", "mode",
+ "peripheral", sizeof("peripheral"), 1);
+}
+void ft_board_setup(void *blob, bd_t *bd)
+{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+ ft_board_fixup_qe_usb(blob, bd);
/*
* mpc8360ea pb mds errata 2: RGMII timing
* if on mpc8360ea rev. 2.1,
* change both ucc phy-connection-types from rgmii-id to rgmii-rxid
*/
- if ((REVID_MAJOR(immr->sysconf.spridr) == 2) &&
- (REVID_MINOR(immr->sysconf.spridr) == 1)) {
+ if (board_handle_erratum2()) {
int nodeoffset;
const char *prop;
int path;
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index 8683772..919a0bf 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -574,14 +574,18 @@ static int fdt_parse_prop(char **newval, int count, char *data, int *len)
* Byte stream. Convert the values.
*/
newp++;
- while ((*newp != ']') && (stridx < count)) {
- tmp = simple_strtoul(newp, &newp, 16);
- *data++ = tmp & 0xFF;
- *len = *len + 1;
+ while ((stridx < count) && (*newp != ']')) {
while (*newp == ' ')
newp++;
- if (*newp != '\0')
+ if (*newp == '\0') {
newp = newval[++stridx];
+ continue;
+ }
+ if (!isxdigit(*newp))
+ break;
+ tmp = simple_strtoul(newp, &newp, 16);
+ *data++ = tmp & 0xFF;
+ *len = *len + 1;
}
if (*newp != ']') {
printf("Unexpected character '%c'\n", *newp);
@@ -589,12 +593,15 @@ static int fdt_parse_prop(char **newval, int count, char *data, int *len)
}
} else {
/*
- * Assume it is a string. Copy it into our data area for
- * convenience (including the terminating '\0').
+ * Assume it is one or more strings. Copy it into our
+ * data area for convenience (including the
+ * terminating '\0's).
*/
while (stridx < count) {
- *len = strlen(newp) + 1;
+ size_t length = strlen(newp) + 1;
strcpy(data, newp);
+ data += length;
+ *len += length;
newp = newval[++stridx];
}
}
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 5c930d3..031e8d5 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -23,8 +23,8 @@
#include <common.h>
#include <mpc83xx.h>
#include <ioports.h>
-#ifdef CONFIG_USB_EHCI_FSL
#include <asm/io.h>
+#ifdef CONFIG_USB_EHCI_FSL
#include <usb/ehci-fsl.h>
#endif
@@ -63,149 +63,163 @@ static void config_qe_ioports(void)
*/
void cpu_init_f (volatile immap_t * im)
{
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /* system performance tweaking */
-
-#ifdef CONFIG_SYS_ACR_PIPE_DEP
- /* Arbiter pipeline depth */
- im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
- (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
+ __be32 acr_mask =
+#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
+ (ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_ACR_RPTCNT
- /* Arbiter repeat count */
- im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
- (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
+#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
+ (ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
#endif
-
+ 0;
+ __be32 acr_val =
+#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
+ (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
+ (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
+#endif
+ 0;
+ __be32 spcr_mask =
+#ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */
+ (SPCR_OPT << SPCR_OPT_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
+ (SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
+ (SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
+ (SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
+#endif
+ 0;
+ __be32 spcr_val =
#ifdef CONFIG_SYS_SPCR_OPT
- /* Optimize transactions between CSB and other devices */
- im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
- (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT);
+ (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SPCR_TSECEP
- /* all eTSEC's Emergency priority */
- im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSECEP) |
- (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT);
+#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
+ (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SPCR_TSEC1EP
- /* TSEC1 Emergency priority */
- im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) |
- (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT);
+#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
+ (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SPCR_TSEC2EP
- /* TSEC2 Emergency priority */
- im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) |
- (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT);
+#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
+ (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_ENCCM
- /* Encryption clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_ENCCM) |
- (CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT);
+ 0;
+ __be32 sccr_mask =
+#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
+ (SCCR_ENCCM << SCCR_ENCCM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_PCICM
- /* PCI & DMA clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_PCICM) |
- (CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
+ (SCCR_PCICM << SCCR_PCICM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_TSECCM
- /* all TSEC's clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSECCM) |
- (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
+ (SCCR_TSECCM << SCCR_TSECCM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_TSEC1CM
- /* TSEC1 clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) |
- (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
+ (SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_TSEC2CM
- /* TSEC2 clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) |
- (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
+ (SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_TSEC1ON
- /* TSEC1 clock switch */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1ON) |
- (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT);
+#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
+ (SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_TSEC2ON
- /* TSEC2 clock switch */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2ON) |
- (CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT);
+#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
+ (SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_USBMPHCM
- /* USB MPH clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_USBMPHCM) |
- (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
+ (SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_USBDRCM
- /* USB DR clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_USBDRCM) |
- (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
+ (SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_SATACM
- /* SATA controller clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_SATACM) |
- (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
+ (SCCR_SATACM << SCCR_SATACM_SHIFT) |
+#endif
+ 0;
+ __be32 sccr_val =
+#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
+ (CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT) |
#endif
+#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
+ (CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
+ (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
+ (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
+ (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
+ (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
+ (CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
+ (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
+ (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
+ (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) |
+#endif
+ 0;
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+
+ /* system performance tweaking */
+ clrsetbits_be32(&im->arbiter.acr, acr_mask, acr_val);
+
+ clrsetbits_be32(&im->sysconf.spcr, spcr_mask, spcr_val);
+
+ clrsetbits_be32(&im->clk.sccr, sccr_mask, sccr_val);
/* RSR - Reset Status Register - clear all status (4.6.1.3) */
- gd->reset_status = im->reset.rsr;
- im->reset.rsr = ~(RSR_RES);
+ gd->reset_status = __raw_readl(&im->reset.rsr);
+ __raw_writel(~(RSR_RES), &im->reset.rsr);
/* AER - Arbiter Event Register - store status */
- gd->arbiter_event_attributes = im->arbiter.aeatr;
- gd->arbiter_event_address = im->arbiter.aeadr;
+ gd->arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr);
+ gd->arbiter_event_address = __raw_readl(&im->arbiter.aeadr);
/*
* RMR - Reset Mode Register
* contains checkstop reset enable (4.6.1.4)
*/
- im->reset.rmr = (RMR_CSRE & (1<<RMR_CSRE_SHIFT));
-
- /* LCRR - Clock Ratio Register (10.3.1.16) */
- im->lbus.lcrr = CONFIG_SYS_LCRR;
+ __raw_writel(RMR_CSRE & (1<<RMR_CSRE_SHIFT), &im->reset.rmr);
- /* Enable Time Base & Decrimenter ( so we will have udelay() )*/
- im->sysconf.spcr |= SPCR_TBEN;
+ /* Enable Time Base & Decrementer ( so we will have udelay() )*/
+ setbits_be32(&im->sysconf.spcr, SPCR_TBEN);
/* System General Purpose Register */
#ifdef CONFIG_SYS_SICRH
#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313)
/* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */
- im->sysconf.sicrh = (im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH;
+ __raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH,
+ &im->sysconf.sicrh);
#else
- im->sysconf.sicrh = CONFIG_SYS_SICRH;
+ __raw_writel(CONFIG_SYS_SICRH, &im->sysconf.sicrh);
#endif
#endif
#ifdef CONFIG_SYS_SICRL
- im->sysconf.sicrl = CONFIG_SYS_SICRL;
+ __raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl);
#endif
- /* DDR control driver register */
-#ifdef CONFIG_SYS_DDRCDR
- im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR;
+#ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */
+ __raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr);
#endif
- /* Output buffer impedance register */
-#ifdef CONFIG_SYS_OBIR
- im->sysconf.obir = CONFIG_SYS_OBIR;
+#ifdef CONFIG_SYS_OBIR /* Output buffer impedance register */
+ __raw_writel(CONFIG_SYS_OBIR, &im->sysconf.obir);
#endif
#ifdef CONFIG_QE
@@ -308,7 +322,7 @@ void cpu_init_f (volatile immap_t * im)
/* Wait for clock to stabilize */
do {
- temp = in_be32(&ehci->control);
+ temp = __raw_readl(&ehci->control);
udelay(1000);
} while (!(temp & PHY_CLK_VALID));
#endif
@@ -317,8 +331,41 @@ void cpu_init_f (volatile immap_t * im)
int cpu_init_r (void)
{
+ volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
#ifdef CONFIG_QE
uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */
+#endif
+ __be32 lcrr_mask =
+#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
+ LCRR_DBYP |
+#endif
+#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */
+ LCRR_EADC |
+#endif
+#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
+ LCRR_CLKDIV |
+#endif
+ 0;
+ __be32 lcrr_val =
+#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
+ CONFIG_SYS_LCRR_DBYP |
+#endif
+#ifdef CONFIG_SYS_LCRR_EADC
+ CONFIG_SYS_LCRR_EADC |
+#endif
+#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
+ CONFIG_SYS_LCRR_CLKDIV |
+#endif
+ 0;
+
+ /* LCRR - Clock Ratio Register (10.3.1.16)
+ * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description
+ */
+ clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val);
+ __raw_readl(&im->lbus.lcrr);
+ isync();
+
+#ifdef CONFIG_QE
qe_init(qe_base);
qe_reset();
#endif
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 47bbf79..2241990 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -100,29 +100,9 @@ static const struct fsl_i2c *i2c_dev[2] = {
*/
static const struct {
unsigned short divider;
-#ifdef __PPC__
- u8 dfsr;
-#endif
u8 fdr;
} fsl_i2c_speed_map[] = {
-#ifdef __PPC__
- {160, 1, 32}, {192, 1, 33}, {224, 1, 34}, {256, 1, 35},
- {288, 1, 0}, {320, 1, 1}, {352, 6, 1}, {384, 1, 2}, {416, 6, 2},
- {448, 1, 38}, {480, 1, 3}, {512, 1, 39}, {544, 11, 3}, {576, 1, 4},
- {608, 22, 3}, {640, 1, 5}, {672, 32, 3}, {704, 11, 5}, {736, 43, 3},
- {768, 1, 6}, {800, 54, 3}, {832, 11, 6}, {896, 1, 42}, {960, 1, 7},
- {1024, 1, 43}, {1088, 22, 7}, {1152, 1, 8}, {1216, 43, 7}, {1280, 1, 9},
- {1408, 22, 9}, {1536, 1, 10}, {1664, 22, 10}, {1792, 1, 46},
- {1920, 1, 11}, {2048, 1, 47}, {2176, 43, 11}, {2304, 1, 12},
- {2560, 1, 13}, {2816, 43, 13}, {3072, 1, 14}, {3328, 43, 14},
- {3584, 1, 50}, {3840, 1, 15}, {4096, 1, 51}, {4608, 1, 16},
- {5120, 1, 17}, {6144, 1, 18}, {7168, 1, 54}, {7680, 1, 19},
- {8192, 1, 55}, {9216, 1, 20}, {10240, 1, 21}, {12288, 1, 22},
- {14336, 1, 58}, {15360, 1, 23}, {16384, 1, 59}, {18432, 1, 24},
- {20480, 1, 25}, {24576, 1, 26}, {28672, 1, 62}, {30720, 1, 27},
- {32768, 1, 63}, {36864, 1, 28}, {40960, 1, 29}, {49152, 1, 30},
- {61440, 1, 31}, {-1, 1, 31}
-#elif defined(__M68K__)
+#ifdef __M68K__
{20, 32}, {22, 33}, {24, 34}, {26, 35},
{28, 0}, {28, 36}, {30, 1}, {32, 37},
{34, 2}, {36, 38}, {40, 3}, {40, 39},
@@ -158,7 +138,6 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev,
unsigned int i2c_clk, unsigned int speed)
{
unsigned short divider = min(i2c_clk / speed, (unsigned short) -1);
- unsigned int i;
/*
* We want to choose an FDR/DFSR that generates an I2C bus speed that
@@ -166,23 +145,72 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev,
* want the first divider that is equal to or greater than the
* calculated divider.
*/
+#ifdef __PPC__
+ u8 dfsr, fdr = 0x31; /* Default if no FDR found */
+ /* a, b and dfsr matches identifiers A,B and C respectively in AN2919 */
+ unsigned short a, b, ga, gb;
+ unsigned long c_div, est_div;
+
+#ifdef CONFIG_FSL_I2C_CUSTOM_DFSR
+ dfsr = CONFIG_FSL_I2C_CUSTOM_DFSR;
+#else
+ /* Condition 1: dfsr <= 50/T */
+ dfsr = (5 * (i2c_clk / 1000)) / 100000;
+#endif
+#ifdef CONFIG_FSL_I2C_CUSTOM_FDR
+ fdr = CONFIG_FSL_I2C_CUSTOM_FDR;
+ speed = i2c_clk / divider; /* Fake something */
+#else
+ debug("Requested speed:%d, i2c_clk:%d\n", speed, i2c_clk);
+ if (!dfsr)
+ dfsr = 1;
+
+ est_div = ~0;
+ for (ga = 0x4, a = 10; a <= 30; ga++, a += 2) {
+ for (gb = 0; gb < 8; gb++) {
+ b = 16 << gb;
+ c_div = b * (a + ((3*dfsr)/b)*2);
+ if ((c_div > divider) && (c_div < est_div)) {
+ unsigned short bin_gb, bin_ga;
+
+ est_div = c_div;
+ bin_gb = gb << 2;
+ bin_ga = (ga & 0x3) | ((ga & 0x4) << 3);
+ fdr = bin_gb | bin_ga;
+ speed = i2c_clk / est_div;
+ debug("FDR:0x%.2x, div:%ld, ga:0x%x, gb:0x%x, "
+ "a:%d, b:%d, speed:%d\n",
+ fdr, est_div, ga, gb, a, b, speed);
+ /* Condition 2 not accounted for */
+ debug("Tr <= %d ns\n",
+ (b - 3 * dfsr) * 1000000 /
+ (i2c_clk / 1000));
+ }
+ }
+ if (a == 20)
+ a += 2;
+ if (a == 24)
+ a += 4;
+ }
+ debug("divider:%d, est_div:%ld, DFSR:%d\n", divider, est_div, dfsr);
+ debug("FDR:0x%.2x, speed:%d\n", fdr, speed);
+#endif
+ writeb(dfsr, &dev->dfsrr); /* set default filter */
+ writeb(fdr, &dev->fdr); /* set bus speed */
+#else
+ unsigned int i;
for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++)
if (fsl_i2c_speed_map[i].divider >= divider) {
u8 fdr;
-#ifdef __PPC__
- u8 dfsr;
- dfsr = fsl_i2c_speed_map[i].dfsr;
-#endif
+
fdr = fsl_i2c_speed_map[i].fdr;
speed = i2c_clk / fsl_i2c_speed_map[i].divider;
writeb(fdr, &dev->fdr); /* set bus speed */
-#ifdef __PPC__
- writeb(dfsr, &dev->dfsrr); /* set default filter */
-#endif
+
break;
}
-
+#endif
return speed;
}
@@ -223,7 +251,7 @@ i2c_init(int speed, int slaveadd)
#endif
}
-static __inline__ int
+static int
i2c_wait4bus(void)
{
unsigned long long timeval = get_ticks();
@@ -248,6 +276,8 @@ i2c_wait(int write)
csr = readb(&i2c_dev[i2c_bus_num]->sr);
if (!(csr & I2C_SR_MIF))
continue;
+ /* Read again to allow register to stabilise */
+ csr = readb(&i2c_dev[i2c_bus_num]->sr);
writeb(0x0, &i2c_dev[i2c_bus_num]->sr);
@@ -293,9 +323,6 @@ __i2c_write(u8 *data, int length)
{
int i;
- writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
- &i2c_dev[i2c_bus_num]->cr);
-
for (i = 0; i < length; i++) {
writeb(data[i], &i2c_dev[i2c_bus_num]->dr);
@@ -326,9 +353,10 @@ __i2c_read(u8 *data, int length)
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK,
&i2c_dev[i2c_bus_num]->cr);
- /* Generate stop on last byte */
+ /* Do not generate stop on last byte */
if (i == length - 1)
- writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr);
+ writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
+ &i2c_dev[i2c_bus_num]->cr);
data[i] = readb(&i2c_dev[i2c_bus_num]->dr);
}
@@ -353,6 +381,9 @@ i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+ if (i2c_wait4bus()) /* Wait until STOP */
+ debug("i2c_read: wait4bus timed out\n");
+
if (i == length)
return 0;
@@ -372,6 +403,8 @@ i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
}
writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+ if (i2c_wait4bus()) /* Wait until STOP */
+ debug("i2c_write: wait4bus timed out\n");
if (i == length)
return 0;
diff --git a/drivers/qe/uccf.h b/drivers/qe/uccf.h
index 1ff9e1d..2404c6a 100644
--- a/drivers/qe/uccf.h
+++ b/drivers/qe/uccf.h
@@ -25,6 +25,7 @@
#include "common.h"
#include "qe.h"
+#include "asm/immap_qe.h"
/* Fast or Giga ethernet
*/
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 1568310..febfbce 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -23,6 +23,9 @@
#ifndef __UEC_H__
#define __UEC_H__
+#include "qe.h"
+#include "uccf.h"
+
#define MAX_TX_THREADS 8
#define MAX_RX_THREADS 8
#define MAX_TX_QUEUES 8
@@ -670,6 +673,7 @@ typedef enum enet_interface {
ENET_1000_RGMII,
ENET_1000_RGMII_ID,
ENET_1000_RGMII_RXID,
+ ENET_1000_RGMII_TXID,
ENET_1000_TBI,
ENET_1000_RTBI,
ENET_1000_SGMII
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index aa4eb5e..9715183 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -429,12 +429,23 @@ static int marvell_init(struct uec_mii_info *mii_info)
{
struct eth_device *edev = mii_info->dev;
uec_private_t *uec = edev->priv;
+ enum enet_interface iface = uec->uec_info->enet_interface;
- if (uec->uec_info->enet_interface == ENET_1000_RGMII_ID) {
+ if (iface == ENET_1000_RGMII_ID ||
+ iface == ENET_1000_RGMII_RXID ||
+ iface == ENET_1000_RGMII_TXID) {
int temp;
temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
- temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+ if (iface == ENET_1000_RGMII_ID) {
+ temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
+ } else if (iface == ENET_1000_RGMII_RXID) {
+ temp &= ~MII_M1111_TX_DELAY;
+ temp |= MII_M1111_RX_DELAY;
+ } else if (iface == ENET_1000_RGMII_TXID) {
+ temp &= ~MII_M1111_RX_DELAY;
+ temp |= MII_M1111_TX_DELAY;
+ }
phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR);
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 76b7894..5927e76 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -216,7 +216,8 @@
/*
* Local Bus LCRR and LBCR regs
*/
-#define CONFIG_SYS_LCRR LCRR_EADC_1 | LCRR_CLKDIV_4
+#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR ( 0x00040000 /* TODO */ \
| (0xFF << LBCR_BMT_SHIFT) \
| 0xF ) /* 0x0004ff0f */
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 84cc9fa..8eaff5d 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -182,7 +182,8 @@
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
#define CONFIG_SYS_LBC_LBCR 0x00040000
/*
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index c40d3d3..356586c 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -170,7 +170,8 @@
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index f16616c..f17f9c7 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -159,7 +159,8 @@
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 9b2d25a..6361c45 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -206,7 +206,8 @@
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 3b4e344..eaa59fd 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -317,7 +317,8 @@ boards, we say we have two, but don't display a message if we find only one. */
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
#define CONFIG_SYS_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index b072e84..8520155 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -185,7 +185,8 @@
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
@@ -382,6 +383,8 @@
#define CONFIG_NET_MULTI 1
#endif
+#define CONFIG_HWCONFIG 1
+
/*
* QE UEC ethernet configuration
*/
@@ -397,7 +400,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_GMII
+#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID
#endif
#define CONFIG_UEC_ETH2 /* GETH2 */
@@ -408,7 +411,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_GMII
+#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID
#endif
/*
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index cb0535c..6cee78a 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -177,7 +177,8 @@
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index a190a50..abeb6a2 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -220,7 +220,8 @@
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 89fafe7..7ef92f7 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -243,7 +243,8 @@
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index 9835567..f8b016f 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -137,7 +137,8 @@
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
/* LB sdram refresh timer, about 6us */
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index 866ff17..f68d834 100644
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -111,7 +111,9 @@
/*
* Local Bus LCRR and LBCR regs
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
#define CONFIG_SYS_LBC_LBCR (0x00040000 /* TODO */ \
| (0xFF << LBCR_BMT_SHIFT) \
| 0xF ) /* 0x0004ff0f */
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index da08b7c..4c909e6 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -52,7 +52,8 @@
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
/* board pre init: do not call, nothing to do */
#undef CONFIG_BOARD_EARLY_INIT_F
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 79d8638..bec08da 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -170,7 +170,9 @@
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_2 | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_EADC LCRR_EADC_2
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
/*
* Init Local Bus Memory Controller:
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index e961bb3..bf7cf82 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -32,6 +32,21 @@
#define __CONFIG_H
/*
+ * Top level Makefile configuration choices
+ */
+#ifdef CONFIG_MK_PCI
+#define CONFIG_PCI
+#endif
+
+#ifdef CONFIG_MK_66
+#define PCI_66M
+#endif
+
+#ifdef CONFIG_MK_33
+#define PCI_33M
+#endif
+
+/*
* High Level Configuration Options
*/
#define CONFIG_E300 1 /* E300 Family */
@@ -182,7 +197,8 @@
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
#undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 5304ec9..d0690fe 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -178,7 +178,8 @@
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
#undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */
generated by cgit v1.1 at 2024-12-11 12:41:08 +0000