diff options
-rw-r--r-- | board/davinci/da830evm/da830evm.c | 37 | ||||
-rw-r--r-- | include/configs/da830evm.h | 21 |
2 files changed, 53 insertions, 5 deletions
diff --git a/board/davinci/da830evm/da830evm.c b/board/davinci/da830evm/da830evm.c index 12df1f8..aac5c5c 100644 --- a/board/davinci/da830evm/da830evm.c +++ b/board/davinci/da830evm/da830evm.c @@ -35,6 +35,7 @@ #include <common.h> #include <i2c.h> #include <asm/arch/hardware.h> +#include <asm/arch/emif_defs.h> #include <asm/io.h> #include "../common/misc.h" @@ -51,6 +52,23 @@ static const struct pinmux_config spi0_pins[] = { { pinmux[7], 1, 7 } }; +/* EMIF-A bus pins for 8-bit NAND support on CS3 */ +static const struct pinmux_config emifa_nand_pins[] = { + { pinmux[13], 1, 6 }, + { pinmux[13], 1, 7 }, + { pinmux[14], 1, 0 }, + { pinmux[14], 1, 1 }, + { pinmux[14], 1, 2 }, + { pinmux[14], 1, 3 }, + { pinmux[14], 1, 4 }, + { pinmux[14], 1, 5 }, + { pinmux[15], 1, 7 }, + { pinmux[16], 1, 0 }, + { pinmux[18], 1, 1 }, + { pinmux[18], 1, 4 }, + { pinmux[18], 1, 5 }, +}; + /* UART pin muxer settings */ static const struct pinmux_config uart_pins[] = { { pinmux[8], 2, 7 }, @@ -77,6 +95,9 @@ static const struct pinmux_resource pinmuxes[] = { #ifdef CONFIG_USB_DA8XX PINMUX_ITEM(usb_pins), #endif +#ifdef CONFIG_USE_NAND + PINMUX_ITEM(emifa_nand_pins), +#endif }; int board_init(void) @@ -96,6 +117,22 @@ int board_init(void) writel(0xffffffff, &davinci_aintc_regs->ecr3); #endif +#ifdef CONFIG_NAND_DAVINCI + /* EMIFA 100MHz clock select */ + writel(readl(&davinci_syscfg_regs->cfgchip3) & ~2, + &davinci_syscfg_regs->cfgchip3); + /* NAND CS setup */ + writel((DAVINCI_ABCR_WSETUP(0) | + DAVINCI_ABCR_WSTROBE(2) | + DAVINCI_ABCR_WHOLD(0) | + DAVINCI_ABCR_RSETUP(0) | + DAVINCI_ABCR_RSTROBE(2) | + DAVINCI_ABCR_RHOLD(0) | + DAVINCI_ABCR_TA(2) | + DAVINCI_ABCR_ASIZE_8BIT), + &davinci_emif_regs->AB2CR); +#endif + /* arch number of the board */ gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA830_EVM; diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 432cd57..65747fb 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -103,14 +103,15 @@ #define CONFIG_NAND_DAVINCI #define CONFIG_SYS_NO_FLASH #define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_ENV_OFFSET (512 << 10) +#define CONFIG_ENV_SIZE (512 << 10) #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST #define CONFIG_SYS_NAND_CS 3 #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE +#define CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_CLE_MASK 0x10 #define CONFIG_SYS_ALE_MASK 0x8 -#define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define NAND_MAX_CHIPS 1 #define DEF_BOOTM "" @@ -216,8 +217,7 @@ #define CONFIG_CMD_NAND #define CONFIG_CMD_MTDPARTS #define CONFIG_MTD_PARTITIONS -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE #endif #ifdef CONFIG_USE_SPIFLASH @@ -268,4 +268,15 @@ #endif /* CONFIG_MUSB_UDC */ #endif /* CONFIG_USB_DA8XX */ + +#ifdef CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=davinci_nand.1" +#define PART_BOOT "512k(bootloader)ro," +#define PART_PARAMS "512k(params)ro," +#define PART_KERNEL "4m(kernel)," +#define PART_REST "-(filesystem)" +#define MTDPARTS_DEFAULT \ + "mtdparts=davinci_nand.1:" PART_BOOT PART_PARAMS PART_KERNEL PART_REST +#endif + #endif /* __CONFIG_H */ |