summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--README10
-rw-r--r--include/configs/ASH405.h4
-rw-r--r--include/configs/CPC45.h25
-rw-r--r--include/configs/CPCI4052.h2
-rw-r--r--include/configs/CPCI405AB.h21
-rw-r--r--include/configs/CU824.h1
-rw-r--r--include/configs/ELPPC.h1
-rw-r--r--include/configs/OXC.h1
-rw-r--r--include/configs/PCIPPC2.h1
-rw-r--r--include/configs/PCIPPC6.h1
-rw-r--r--include/configs/PM826.h1
-rw-r--r--include/configs/PMC405.h4
-rw-r--r--include/configs/Sandpoint8240.h1
-rw-r--r--include/configs/Sandpoint8245.h1
-rw-r--r--include/configs/sc520_spunk.h15
-rw-r--r--include/configs/utx8245.h1
16 files changed, 54 insertions, 36 deletions
diff --git a/README b/README
index ce27ff1..f660f46 100644
--- a/README
+++ b/README
@@ -690,7 +690,7 @@ The following options need to be configured:
- NETWORK Support (PCI):
CONFIG_E1000
Support for Intel 8254x gigabit chips.
-
+
CONFIG_EEPRO100
Support for Intel 82557/82559/82559ER chips.
Optional CONFIG_EEPRO100_SROM_WRITE enables eeprom
@@ -1442,6 +1442,14 @@ Configuration Settings:
Define if the flash driver uses extra elements in the
common flash structure for storing flash geometry
+- CFG_RX_ETH_BUFFER:
+ Defines the number of ethernet receive buffers. On some
+ ethernet controllers it is recommended to set this value
+ to 8 or even higher (EEPRO100 or 405 EMAC), since all
+ buffers can be full shortly after enabling the interface
+ on high ethernet traffic.
+ Defaults to 4 if not defined.
+
The following definitions that deal with the placement and management
of environment data (variable area); in general, we support the
following configurations:
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 5468fe2..3a630d8 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -125,6 +125,10 @@
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
+
/*-----------------------------------------------------------------------
* NAND-FLASH stuff
*-----------------------------------------------------------------------
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index ed843d4..66f978e 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -144,7 +144,7 @@
/*
* NS16550 Configuration
*/
-#define CFG_NS16550
+#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE 1
@@ -171,7 +171,7 @@
* Memory configuration using SPD information stored on the SODIMMs
* not yet supported.
*/
-
+
#define CFG_SDRAM_SIZE 64 /* SDRAM size -- 64 or 128 MB supported */
/* Bit-field values for MCCR1.
@@ -186,7 +186,7 @@
#else
# error "SDRAM size not supported"
#endif
-#define CFG_BANK1_ROW 0
+#define CFG_BANK1_ROW 0
#define CFG_BANK2_ROW 0
#define CFG_BANK3_ROW 0
#define CFG_BANK4_ROW 0
@@ -361,7 +361,7 @@
/* IRQ_ENA_2 bit definitions */
#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */
#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */
-#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */
+#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */
#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */
#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */
#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */
@@ -371,9 +371,9 @@
/* IRQ_STAT_2 bit definitions */
#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */
#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */
-#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */
+#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */
#define I_STAT_2_RTC 0x10 /* RTC IRQ status */
-#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */
+#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */
#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */
#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */
#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */
@@ -421,14 +421,14 @@
#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */
#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */
-#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */
-#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */
+#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */
+#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */
#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */
-#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */
-#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */
+#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */
+#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */
#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */
-#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */
-#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */
+#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */
+#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */
/*-----------------------------------------------------------------------
@@ -441,6 +441,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define PCI_ENET0_IOADDR 0x00104000
#define PCI_ENET0_MEMADDR 0x82000000
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index 9b1dc8a..a4cfe25 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -146,6 +146,8 @@
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
+
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index a265fcd..5e07d3e 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -55,15 +55,7 @@
#endif
#undef CONFIG_BOOTARGS
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
- "bootm ffc00000 ffca0000"
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
- "bootm ffc00000"
-#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "bootm 100000" /* default boot command */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
@@ -73,12 +65,7 @@
#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */
-#if 0 /* test-only */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_VENDOREX)
-#else
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT)
-#endif
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_DHCP | \
@@ -147,6 +134,8 @@
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
+
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
@@ -202,7 +191,7 @@
#define CFG_FLASH_BASE 0xFFFC0000
#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
/*
* For booting Linux, the board info and command line data
@@ -360,7 +349,7 @@
#define CFG_FPGA_STATUS_TS_IRQ 0x1000
#define CFG_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */
-#define CFG_FPGA_MAX_SIZE 64*1024 /* 64kByte is enough for XC2S15 */
+#define CFG_FPGA_MAX_SIZE 128*1024 /* 128kByte is enough for XC2S30 */
/* FPGA program pin configuration */
#define CFG_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
index 40ba25a..ccbed31 100644
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -304,6 +304,7 @@
#define CFG_ETH_IOBASE 0x00104000
#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define PCI_ENET0_IOADDR 0x00104000
#define PCI_ENET0_MEMADDR 0x80000000
#endif /* __CONFIG_H */
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
index a9e87c5..54cdd23 100644
--- a/include/configs/ELPPC.h
+++ b/include/configs/ELPPC.h
@@ -333,6 +333,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_EEPRO100_SROM_WRITE
#endif /* __CONFIG_H */
diff --git a/include/configs/OXC.h b/include/configs/OXC.h
index 7a60e4b..57f577d2 100644
--- a/include/configs/OXC.h
+++ b/include/configs/OXC.h
@@ -94,6 +94,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100 /* Ethernet Express PRO 100 */
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define PCI_ENET0_IOADDR 0x80000000
#define PCI_ENET0_MEMADDR 0x80000000
diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h
index b48d0d7..3eb6ac3 100644
--- a/include/configs/PCIPPC2.h
+++ b/include/configs/PCIPPC2.h
@@ -261,6 +261,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_TULIP
#endif /* __CONFIG_H */
diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h
index bf858ec..f4dfbfe 100644
--- a/include/configs/PCIPPC6.h
+++ b/include/configs/PCIPPC6.h
@@ -263,6 +263,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_TULIP
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index 018865e..6ba14af 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -316,6 +316,7 @@
#ifdef CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#endif
/*
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 6965ebe..3ec84ff 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -128,6 +128,10 @@
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
+
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index 0bef321..799d5d6 100644
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -82,6 +82,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define PCI_ENET0_IOADDR 0x80000000
#define PCI_ENET0_MEMADDR 0x80000000
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index aa45675..307c2e2 100644
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -81,6 +81,7 @@
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NATSEMI
#define CONFIG_NS8382X
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
index 4d5a568..2b5a54d 100644
--- a/include/configs/sc520_spunk.h
+++ b/include/configs/sc520_spunk.h
@@ -36,7 +36,7 @@
#define CONFIG_X86 1 /* This is a X86 CPU */
#define CONFIG_SC520 1 /* Include support for AMD SC520 */
-#define CFG_SDRAM_PRECHARGE_DELAY 6 /* 6T */
+#define CFG_SDRAM_PRECHARGE_DELAY 6 /* 6T */
#define CFG_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
#define CFG_SDRAM_RAS_CAS_DELAY 3 /* 3T */
@@ -71,7 +71,7 @@
#define CONFIG_BOOTDELAY 15
#define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) "
-#define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm"
+#define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm"
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
@@ -123,7 +123,7 @@
#define CONFIG_SPI_EEPROM /* SPI EEPROMs such as AT25010 or AT25640 */
#define CONFIG_MW_EEPROM /* MicroWire EEPROMS such as AT93LC46 */
#define CONFIG_DS1722 /* Dallas DS1722 SPI Temperature probe */
-
+
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
@@ -131,7 +131,7 @@
#if 0
/* Environment in flash */
-#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_IS_IN_FLASH 1
# define CFG_ENV_ADDR (0x387a0000) /* Addr of Environment Sector */
# define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector (or 0x10000) */
# define CFG_ENV_OFFSET 0
@@ -143,7 +143,7 @@
# define CONFIG_SPI
# define CONFIG_SPI_X 1
# define CFG_ENV_SIZE 0x2000 /* Total Size of Environment EEPROM */
-# define CFG_ENV_OFFSET 0x1c00
+# define CFG_ENV_OFFSET 0x1c00
#endif
@@ -155,6 +155,7 @@
*/
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
/************************************************************
* IDE/ATA stuff
@@ -204,8 +205,8 @@
#define CONFIG_PCI_SCAN_SHOW
#define CFG_FIRST_PCI_IRQ 9
-#define CFG_SECOND_PCI_IRQ 10
-#define CFG_THIRD_PCI_IRQ 11
+#define CFG_SECOND_PCI_IRQ 10
+#define CFG_THIRD_PCI_IRQ 11
#define CFG_FORTH_PCI_IRQ 12
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 80cfe8a..4c4c279 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -125,6 +125,7 @@ protect on $(u-boot_startaddr) $(u-boot_endaddr)"
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_NET_MULTI
#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_EEPRO100_SROM_WRITE
#define PCI_ENET0_IOADDR 0xF0000000
generated by cgit v1.1 at 2024-11-24 10:27:31 +0000