diff options
44 files changed, 3656 insertions, 1131 deletions
@@ -1,3 +1,46 @@ +commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3 +Author: Gary Jennejohn <garyj@pollux.denx.de> +Date: Wed Jan 24 12:16:56 2007 +0100 + + Add port for the lpc2292sodimm evaluation board from EmbeddedArtists + +commit 2daf046ba627f85f44195815778140039636244e +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue Jan 23 17:22:06 2007 +0100 + + [iDMR] Add MTD and JFFS2 support, also add default partition definition. + +commit f7db33101fbc9c8f0a10738ce87034875a17aeb9 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue Jan 23 14:21:14 2007 +0100 + + [iDMR] Flash driver on initialisation write-protects some sectors, + currently sectors 0-3. Sector 3 does not need to be protected, though + (U-boot occupies sectors 0-1 and the environment sector 2). This commit + fixes this, i.e., only sectors 0-2 are protected. + +commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue Jan 23 14:11:22 2007 +0100 + + [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g., + "mii device" results in "Unexpected exception"). Fixing this properly + requires some clean-up in the FEC drivers infrastructure for ColdFire, so + this commit disables MII commads for now. + +commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue Jan 23 13:25:22 2007 +0100 + + [ColdFire MCF5271 family] Add CPU detection based on the value of Chip + Identification Register (CIR). + +commit a4012396645533aef218354eeba754dff0deace8 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Fri Jan 19 23:08:39 2007 +0100 + + Minor code cleanup. + commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39 Author: Heiko Schocher <hs@pollux.denx.de> Date: Fri Jan 19 19:57:10 2007 +0100 diff --git a/MAINTAINERS b/MAINTAINERS index e9203eb..f90c5a6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -28,6 +28,7 @@ Pantelis Antoniou <panto@intracom.gr> Reinhard Arlt <reinhard.arlt@esd-electronics.com> cpci5200 MPC5200 + mecp5200 MPC5200 pf5200 MPC5200 CPCI750 PPC750FX/GX @@ -37,9 +37,9 @@ LIST_5xx=" \ LIST_5xxx=" \ BC3450 cpci5200 EVAL5200 fo300 \ icecube_5100 icecube_5200 lite5200b mcc200 \ - o2dnt pf5200 PM520 TB5200 \ - Total5100 Total5200 Total5200_Rev2 TQM5200 \ - TQM5200_B TQM5200S v38b \ + mecp5200 o2dnt pf5200 PM520 \ + TB5200 Total5100 Total5200 Total5200_Rev2 \ + TQM5200 TQM5200_B TQM5200S v38b \ " ######################################################################### @@ -181,7 +181,7 @@ LIST_SA="assabet dnp1110 gcplus lart shannon" LIST_ARM7=" \ armadillo B2 ep7312 evb4510 \ impa7 integratorap ap7 ap720t \ - modnet50 \ + lpc2292sodimm modnet50 \ " ######################################################################### @@ -482,6 +482,9 @@ prs200_highboot_DDR_config: unconfig } @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200 +mecp5200_config: unconfig + @$(MKCONFIG) -a mecp5200 ppc mpc5xxx mecp5200 esd + o2dnt_config: @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt @@ -1236,7 +1239,10 @@ yosemite_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx yosemite amcc yellowstone_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx yellowstone amcc + @mkdir -p $(obj)include + @echo "#define CONFIG_YELLOWSTONE" > $(obj)include/config.h + @echo "Configuring for yellowstone board as subset of yosemite..." + @$(MKCONFIG) -a yosemite ppc ppc4xx yosemite amcc yucca_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc @@ -2029,6 +2035,9 @@ modnet50_config : unconfig evb4510_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 +lpc2292sodimm_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm + ######################################################################### ## XScale Systems ######################################################################### diff --git a/board/amcc/yellowstone/init.S b/board/amcc/yellowstone/init.S deleted file mode 100644 index 425ad08..0000000 --- a/board/amcc/yellowstone/init.S +++ /dev/null @@ -1,112 +0,0 @@ -/* -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation; either version 2 of -* the License, or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -* MA 02111-1307 USA -*/ - -#include <ppc_asm.tmpl> -#include <config.h> - -/* General */ -#define TLB_VALID 0x00000200 - -/* Supported page sizes */ - -#define SZ_1K 0x00000000 -#define SZ_4K 0x00000010 -#define SZ_16K 0x00000020 -#define SZ_64K 0x00000030 -#define SZ_256K 0x00000040 -#define SZ_1M 0x00000050 -#define SZ_8M 0x00000060 -#define SZ_16M 0x00000070 -#define SZ_256M 0x00000090 - -/* Storage attributes */ -#define SA_W 0x00000800 /* Write-through */ -#define SA_I 0x00000400 /* Caching inhibited */ -#define SA_M 0x00000200 /* Memory coherence */ -#define SA_G 0x00000100 /* Guarded */ -#define SA_E 0x00000080 /* Endian */ - -/* Access control */ -#define AC_X 0x00000024 /* Execute */ -#define AC_W 0x00000012 /* Write */ -#define AC_R 0x00000009 /* Read */ - -/* Some handy macros */ - -#define EPN(e) ((e) & 0xfffffc00) -#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) -#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) -#define TLB2(a) ( (a)&0x00000fbf ) - -#define tlbtab_start\ - mflr r1 ;\ - bl 0f ; - -#define tlbtab_end\ - .long 0, 0, 0 ; \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - -#define tlbentry(epn,sz,rpn,erpn,attr)\ - .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) - - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/) - - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) - - tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I ) - - /* PCI */ - tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I ) - - /* USB 2.0 Device */ - tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I ) - - tlbtab_end diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c deleted file mode 100644 index 04f58e0..0000000 --- a/board/amcc/yellowstone/yellowstone.c +++ /dev/null @@ -1,549 +0,0 @@ -/* - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <ppc4xx.h> -#include <asm/processor.h> -#include <spd_sdram.h> - -DECLARE_GLOBAL_DATA_PTR; - -extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -int board_early_init_f(void) -{ - register uint reg; - - /*-------------------------------------------------------------------- - * Setup the external bus controller/chip selects - *-------------------------------------------------------------------*/ - mtdcr(ebccfga, xbcfg); - reg = mfdcr(ebccfgd); - mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */ - - /*-------------------------------------------------------------------- - * Setup the GPIO pins - *-------------------------------------------------------------------*/ - /*CPLD cs */ - /*setup Address lines for flash size 64Meg. */ - out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x50010000); - out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x50010000); - out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x50000000); - - /*setup emac */ - out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080); - out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40); - out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55); - out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000); - out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000); - - /*UART1 */ - out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000); - out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000); - out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000); - - /* external interrupts IRQ0...3 */ - out32(GPIO1_TCR, in32(GPIO1_TCR) & ~0x00f00000); - out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x0000ff00); - out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500); - -#if 0 /* test-only */ - /*setup USB 2.0 */ - out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000); - out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000); - out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf); - out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa); - out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500); -#endif - - /*-------------------------------------------------------------------- - * Setup the interrupt controller polarities, triggers, etc. - *-------------------------------------------------------------------*/ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */ - mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - - /*-------------------------------------------------------------------- - * Setup other serial configuration - *-------------------------------------------------------------------*/ - mfsdr(sdr_pci0, reg); - mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */ - mtsdr(sdr_pfc0, 0x00003e00); /* Pin function */ - mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins */ - - /*clear tmrclk divisor */ - *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00; - - /*enable ethernet */ - *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0; - -#if 0 /* test-only */ - /*enable usb 1.1 fs device and remove usb 2.0 reset */ - *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00; -#endif - - /*get rid of flash write protect */ - *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00; - - return 0; -} - -int misc_init_r (void) -{ - uint pbcr; - int size_val = 0; - - /* Re-do sizing to get full correct info */ - mtdcr(ebccfga, pb0cr); - pbcr = mfdcr(ebccfgd); - switch (gd->bd->bi_flashsize) { - case 1 << 20: - size_val = 0; - break; - case 2 << 20: - size_val = 1; - break; - case 4 << 20: - size_val = 2; - break; - case 8 << 20: - size_val = 3; - break; - case 16 << 20: - size_val = 4; - break; - case 32 << 20: - size_val = 5; - break; - case 64 << 20: - size_val = 6; - break; - case 128 << 20: - size_val = 7; - break; - } - pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtdcr(ebccfga, pb0cr); - mtdcr(ebccfgd, pbcr); - - /* adjust flash start and offset */ - gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; - gd->bd->bi_flashoffset = 0; - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - -CFG_MONITOR_LEN, - 0xffffffff, - &flash_info[0]); - - return 0; -} - -int checkboard(void) -{ - char *s = getenv("serial#"); - u8 rev; - u8 val; - - printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board"); - - rev = *(u8 *)(CFG_CPLD + 0); - val = *(u8 *)(CFG_CPLD + 5) & 0x01; - printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); - - if (s != NULL) { - puts(", serial# "); - puts(s); - } - putc('\n'); - - return (0); -} - -/************************************************************************* - * sdram_init -- doesn't use serial presence detect. - * - * Assumes: 256 MB, ECC, non-registered - * PLB @ 133 MHz - * - ************************************************************************/ -#define NUM_TRIES 64 -#define NUM_READS 10 - -void sdram_tr1_set(int ram_address, int* tr1_value) -{ - int i; - int j, k; - volatile unsigned int* ram_pointer = (unsigned int*)ram_address; - int first_good = -1, last_bad = 0x1ff; - - unsigned long test[NUM_TRIES] = { - 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, - 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, - 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, - 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, - 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, - 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, - 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, - 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, - 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, - 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, - 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, - 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, - 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, - 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, - 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, - 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 }; - - /* go through all possible SDRAM0_TR1[RDCT] values */ - for (i=0; i<=0x1ff; i++) { - /* set the current value for TR1 */ - mtsdram(mem_tr1, (0x80800800 | i)); - - /* write values */ - for (j=0; j<NUM_TRIES; j++) { - ram_pointer[j] = test[j]; - - /* clear any cache at ram location */ - __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); - } - - /* read values back */ - for (j=0; j<NUM_TRIES; j++) { - for (k=0; k<NUM_READS; k++) { - /* clear any cache at ram location */ - __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); - - if (ram_pointer[j] != test[j]) - break; - } - - /* read error */ - if (k != NUM_READS) { - break; - } - } - - /* we have a SDRAM0_TR1[RDCT] that is part of the window */ - if (j == NUM_TRIES) { - if (first_good == -1) - first_good = i; /* found beginning of window */ - } else { /* bad read */ - /* if we have not had a good read then don't care */ - if(first_good != -1) { - /* first failure after a good read */ - last_bad = i-1; - break; - } - } - } - - /* return the current value for TR1 */ - *tr1_value = (first_good + last_bad) / 2; -} - -void sdram_init(void) -{ - register uint reg; - int tr1_bank1, tr1_bank2; - - /*-------------------------------------------------------------------- - * Setup some default - *------------------------------------------------------------------*/ - mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */ - mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram(mem_clktr, 0x40000000); /* ?? */ - mtsdram(mem_wddctr, 0x40000000); /* ?? */ - - /*clear this first, if the DDR is enabled by a debugger - then you can not make changes. */ - mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */ - - /*-------------------------------------------------------------------- - * Setup for board-specific specific mem - *------------------------------------------------------------------*/ - /* - * Following for CAS Latency = 2.5 @ 133 MHz PLB - */ - mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ - mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */ - - mtsdram(mem_tr0, 0x410a4012); /* ?? */ - mtsdram(mem_rtr, 0x04080000); /* ?? */ - mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */ - mtsdram(mem_cfg0, 0x30000000); /* Disable EEC */ - udelay(400); /* Delay 200 usecs (min) */ - - /*-------------------------------------------------------------------- - * Enable the controller, then wait for DCEN to complete - *------------------------------------------------------------------*/ - mtsdram(mem_cfg0, 0x80000000); /* Enable */ - - for (;;) { - mfsdram(mem_mcsts, reg); - if (reg & 0x80000000) - break; - } - - sdram_tr1_set(0x00000000, &tr1_bank1); - sdram_tr1_set(0x08000000, &tr1_bank2); - mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800) ); -} - -/************************************************************************* - * long int initdram - * - ************************************************************************/ -long int initdram(int board) -{ - sdram_init(); - return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024); /* return bytes */ -} - -#if defined(CFG_DRAM_TEST) -int testdram(void) -{ - unsigned long *mem = (unsigned long *)0; - const unsigned long kend = (1024 / sizeof(unsigned long)); - unsigned long k, n; - - mtmsr(0); - - for (k = 0; k < CFG_KBYTES_SDRAM; - ++k, mem += (1024 / sizeof(unsigned long))) { - if ((k & 1023) == 0) { - printf("%3d MB\r", k / 1024); - } - - memset(mem, 0xaaaaaaaa, 1024); - for (n = 0; n < kend; ++n) { - if (mem[n] != 0xaaaaaaaa) { - printf("SDRAM test fails at: %08x\n", - (uint) & mem[n]); - return 1; - } - } - - memset(mem, 0x55555555, 1024); - for (n = 0; n < kend; ++n) { - if (mem[n] != 0x55555555) { - printf("SDRAM test fails at: %08x\n", - (uint) & mem[n]); - return 1; - } - } - } - printf("SDRAM test passes\n"); - return 0; -} -#endif - -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB3 devices to 0. - | Set PLB3 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - mfsdr(sdr_amp1, addr); - mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb3_acr); - mtdcr(plb3_acr, addr | 0x80000000); - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB4 devices to 0. - +-------------------------------------------------------------------------*/ - mfsdr(sdr_amp0, addr); - mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ - mtdcr(plb4_acr, addr); - - /*-------------------------------------------------------------------------+ - | Set Nebula PLB4 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - /* Segment0 */ - addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; - addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; - addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; - addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; - mtdcr(plb0_acr, addr); - - /* Segment1 */ - addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; - addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; - addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; - addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; - mtdcr(plb1_acr, addr); - - return 1; -} -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Set up Direct MMIO registers - *--------------------------------------------------------------------------*/ - /*--------------------------------------------------------------------------+ - | PowerPC440 EP PCI Master configuration. - | Map one 1Gig range of PLB/processor addresses to PCI memory space. - | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ - - /*--------------------------------------------------------------------------+ - * Set up Configuration registers - *--------------------------------------------------------------------------*/ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CFG_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ - -/************************************************************************* - * pci_master_init - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 EP PCI Configuration regs. - | Enable PowerPC440 EP to be a master on the PCI bus (PMM). - | Enable PowerPC440 EP to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* Bamboo is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * hw_watchdog_reset - * - * This routine is called to reset (keep alive) the watchdog timer - * - ************************************************************************/ -#if defined(CONFIG_HW_WATCHDOG) -void hw_watchdog_reset(void) -{ - -} -#endif - -void board_reset(void) -{ - /* give reset to BCSR */ - *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09; -} diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index d47219c..c2e12ba 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -65,12 +65,14 @@ int board_early_init_f(void) out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x0000ff00); out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500); +#ifdef CONFIG_440EP /*setup USB 2.0 */ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000); out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000); out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf); out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa); out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500); +#endif /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. @@ -105,8 +107,10 @@ int board_early_init_f(void) /*enable ethernet */ *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0; +#ifdef CONFIG_440EP /*enable usb 1.1 fs device and remove usb 2.0 reset */ *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00; +#endif /*get rid of flash write protect */ *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00; @@ -171,7 +175,11 @@ int checkboard(void) u8 rev; u8 val; +#ifdef CONFIG_440EP printf("Board: Yosemite - AMCC PPC440EP Evaluation Board"); +#else + printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board"); +#endif rev = *(u8 *)(CFG_CPLD + 0); val = *(u8 *)(CFG_CPLD + 5) & 0x01; diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c index dbed597..36bb7ce 100644 --- a/board/esd/cpci750/cpci750.c +++ b/board/esd/cpci750/cpci750.c @@ -29,6 +29,7 @@ */ #include <common.h> +#include <command.h> #include <74xx_7xx.h> #include "../../Marvell/include/memory.h" #include "../../Marvell/include/pci.h" @@ -899,3 +900,24 @@ void board_prebootm_init () flush_data_cache (); dcache_disable (); } + + +int do_show_cfg(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + unsigned int reset_sample_low; + unsigned int reset_sample_high; + + GT_REG_READ(0x3c4, &reset_sample_low); + GT_REG_READ(0x3d4, &reset_sample_high); + printf("Reset configuration 0x%08x 0x%08x\n", reset_sample_low, reset_sample_high); + + return(0); +} + + +U_BOOT_CMD( + show_cfg, 1, 1, do_show_cfg, + "show_cfg- Show Marvell strapping register\n", + "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n" + ); + diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c index 6bdfc1d..c094755 100644 --- a/board/esd/cpci750/sdram_init.c +++ b/board/esd/cpci750/sdram_init.c @@ -1504,6 +1504,8 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info) /* for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */ { + int l, l1; + i = info->slot; DP (printf ("\n*** Running a MRS cycle for bank %d ***\n", i)); @@ -1511,20 +1513,39 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info) /* map the bank */ memory_map_bank (i, 0, GB / 4); #if 1 /* test only */ - /* set SDRAM mode */ /* To_do check it */ + + tmp = GTREGREAD (SDRAM_MODE); + GT_REG_WRITE (EXTENDED_DRAM_MODE, 0x0); + GT_REG_WRITE (SDRAM_OPERATION, 0x4); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); + } + + GT_REG_WRITE (SDRAM_MODE, tmp | 0x80); GT_REG_WRITE (SDRAM_OPERATION, 0x3); - check = GTREGREAD (SDRAM_OPERATION); - DP (printf - ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", - check)); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); + } + l1 = 0; + for (l=0;l<200;l++) + l1 += GTREGREAD (SDRAM_OPERATION); + GT_REG_WRITE (SDRAM_MODE, tmp); + GT_REG_WRITE (SDRAM_OPERATION, 0x3); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); + } /* switch back to normal operation mode */ - GT_REG_WRITE (SDRAM_OPERATION, 0); - check = GTREGREAD (SDRAM_OPERATION); - DP (printf - ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", - check)); + GT_REG_WRITE (SDRAM_OPERATION, 0x5); + while (GTREGREAD (SDRAM_OPERATION) != 0) { + DP (printf + ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); + } + #endif /* test only */ /* unmap the bank */ memory_map_bank (i, 0, 0); diff --git a/board/amcc/yellowstone/Makefile b/board/esd/mecp5200/Makefile index 261e5d4..45efdb0 100644 --- a/board/amcc/yellowstone/Makefile +++ b/board/esd/mecp5200/Makefile @@ -1,5 +1,6 @@ + # -# (C) Copyright 2002-2006 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -26,13 +27,12 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS = $(BOARD).o -SOBJS = init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) clean: diff --git a/board/esd/mecp5200/config.mk b/board/esd/mecp5200/config.mk new file mode 100644 index 0000000..07b5de1 --- /dev/null +++ b/board/esd/mecp5200/config.mk @@ -0,0 +1,44 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# IceCube board: +# +# Valid values for TEXT_BASE are: +# +# 0xFFF00000 boot high (standard configuration) +# 0xFF000000 boot low for 16 MiB boards +# 0xFF800000 boot low for 8 MiB boards +# 0x00100000 boot from RAM (for testing only) +# + +sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE +## Standard: boot high +TEXT_BASE = 0xFFF00000 +## For testing: boot from RAM +# TEXT_BASE = 0x00100000 +endif + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/esd/mecp5200/mecp5200.c b/board/esd/mecp5200/mecp5200.c new file mode 100644 index 0000000..c4b91e9 --- /dev/null +++ b/board/esd/mecp5200/mecp5200.c @@ -0,0 +1,261 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * pf5200.c - main board support/init for the esd pf5200. + */ + +#include <common.h> +#include <mpc5xxx.h> +#include <pci.h> +#include <command.h> + +#include "mt46v16m16-75.h" + +void init_power_switch(void); + +static void sdram_start(int hi_addr) +{ + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + *(vu_long *) MPC5XXX_SDRAM_CTRL = + SDRAM_CONTROL | 0x80000000 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* precharge all banks */ + *(vu_long *) MPC5XXX_SDRAM_CTRL = + SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* set mode register: extended mode */ + *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE; + __asm__ volatile ("sync"); + + /* set mode register: reset DLL */ + *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; + __asm__ volatile ("sync"); + + /* precharge all banks */ + *(vu_long *) MPC5XXX_SDRAM_CTRL = + SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* auto refresh */ + *(vu_long *) MPC5XXX_SDRAM_CTRL = + SDRAM_CONTROL | 0x80000004 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* set mode register */ + *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE; + __asm__ volatile ("sync"); + + /* normal operation */ + *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; + __asm__ volatile ("sync"); +} + +/* + * ATTENTION: Although partially referenced initdram does NOT make real use + * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE + * is something else than 0x00000000. + */ + +long int initdram(int board_type) +{ + ulong dramsize = 0; + ulong test1, test2; + + /* setup SDRAM chip selects */ + *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ + *(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */ + __asm__ volatile ("sync"); + + /* setup config registers */ + *(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + __asm__ volatile ("sync"); + + /* set tap delay */ + *(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; + __asm__ volatile ("sync"); + + /* find RAM size using SDRAM CS0 only */ + sdram_start(0); + test1 = get_ram_size(CFG_SDRAM_BASE, 0x80000000); + sdram_start(1); + test2 = get_ram_size(CFG_SDRAM_BASE, 0x80000000); + + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) + dramsize = 0; + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + *(vu_long *) MPC5XXX_SDRAM_CS0CFG = + 0x13 + __builtin_ffs(dramsize >> 20) - 1; + /* let SDRAM CS1 start right after CS0 */ + *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e; /* 2G */ + } else { +#if 0 + *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ + /* let SDRAM CS1 start right after CS0 */ + *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e; /* 2G */ +#else + *(vu_long *) MPC5XXX_SDRAM_CS0CFG = + 0x13 + __builtin_ffs(0x08000000 >> 20) - 1; + /* let SDRAM CS1 start right after CS0 */ + *(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x08000000 + 0x0000001e; /* 2G */ +#endif + } + +#if 0 + /* find RAM size using SDRAM CS1 only */ + sdram_start(0); + get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000); + sdram_start(1); + get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000); + sdram_start(0); +#endif + /* set SDRAM CS1 size according to the amount of RAM found */ + + *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ + + init_power_switch(); + return (dramsize); +} + +int checkboard(void) +{ + puts("Board: esd CPX CPU5200 (mecp5200)\n"); + return 0; +} + +void flash_preinit(void) +{ + /* + * Now, when we are in RAM, enable flash write + * access for detection process. + * Note that CS_BOOT cannot be cleared when + * executing in flash. + */ + *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ +} + +void flash_afterinit(ulong size) +{ + if (size == CFG_FLASH_SIZE) { + /* adjust mapping */ + *(vu_long *) MPC5XXX_BOOTCS_START = + *(vu_long *) MPC5XXX_CS0_START = + START_REG(CFG_BOOTCS_START | size); + *(vu_long *) MPC5XXX_BOOTCS_STOP = + *(vu_long *) MPC5XXX_CS0_STOP = + STOP_REG(CFG_BOOTCS_START | size, size); + } +} + +#ifdef CONFIG_PCI +static struct pci_controller hose; + +extern void pci_mpc5xxx_init(struct pci_controller *); + +void pci_init_board(void) +{ + pci_mpc5xxx_init(&hose); +} +#endif + +#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) + +#define GPIO_PSC1_4 0x01000000UL + +void init_ide_reset(void) +{ + debug("init_ide_reset\n"); + + /* Configure PSC1_4 as GPIO output for ATA reset */ + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; + *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; +} + +void ide_set_reset(int idereset) +{ + debug("ide_reset(%d)\n", idereset); + + if (idereset) + *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4; + else + *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; +} +#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ + +#define MPC5XXX_SIMPLEIO_GPIO_ENABLE (MPC5XXX_GPIO + 0x0004) +#define MPC5XXX_SIMPLEIO_GPIO_DIR (MPC5XXX_GPIO + 0x000C) +#define MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT (MPC5XXX_GPIO + 0x0010) +#define MPC5XXX_SIMPLEIO_GPIO_DATA_INPUT (MPC5XXX_GPIO + 0x0014) + +#define MPC5XXX_INTERRUPT_GPIO_ENABLE (MPC5XXX_GPIO + 0x0020) +#define MPC5XXX_INTERRUPT_GPIO_DIR (MPC5XXX_GPIO + 0x0028) +#define MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT (MPC5XXX_GPIO + 0x002C) +#define MPC5XXX_INTERRUPT_GPIO_STATUS (MPC5XXX_GPIO + 0x003C) + +#define GPIO_WU6 0x40000000UL +#define GPIO_USB0 0x00010000UL +#define GPIO_USB9 0x08000000UL +#define GPIO_USB9S 0x00080000UL + +void init_power_switch(void) +{ + debug("init_power_switch\n"); + + /* Configure GPIO_WU6 as GPIO output for ATA reset */ + *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6; + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6; + *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6; + __asm__ volatile ("sync"); + + *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT &= ~GPIO_USB0; + *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_ENABLE |= GPIO_USB0; + *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DIR |= GPIO_USB0; + __asm__ volatile ("sync"); + + *(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9; + *(vu_long *) MPC5XXX_INTERRUPT_GPIO_ENABLE &= ~GPIO_USB9; + __asm__ volatile ("sync"); + + if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) == 0) { + *(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |= GPIO_USB0; + __asm__ volatile ("sync"); + } +} diff --git a/board/esd/mecp5200/mt46v16m16-75.h b/board/esd/mecp5200/mt46v16m16-75.h new file mode 100644 index 0000000..22d0a55 --- /dev/null +++ b/board/esd/mecp5200/mt46v16m16-75.h @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define SDRAM_DDR 1 /* is DDR */ + +#if defined(CONFIG_MPC5200) +/* Settings for XLB = 132 MHz */ +#define SDRAM_MODE 0x018D0000 +#define SDRAM_EMODE 0x40090000 +#define SDRAM_CONTROL 0x705f0f00 +#define SDRAM_CONFIG1 0x73722930 +#define SDRAM_CONFIG2 0x47770000 +#define SDRAM_TAPDELAY 0x10000000 + +#else +#error CONFIG_MPC5200 not defined +#endif diff --git a/board/amcc/yellowstone/u-boot.lds b/board/esd/mecp5200/u-boot.lds index a0ba44d..d999dd1 100644 --- a/board/amcc/yellowstone/u-boot.lds +++ b/board/esd/mecp5200/u-boot.lds @@ -1,5 +1,5 @@ /* - * (C) Copyright 2002 + * (C) Copyright 2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -27,16 +27,6 @@ SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/ __DYNAMIC = 0; */ SECTIONS { - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - /* Read-only sections, merged into text segment: */ . = + SIZEOF_HEADERS; .interp : { *(.interp) } @@ -63,44 +53,21 @@ SECTIONS .plt : { *(.plt) } .text : { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/yellowstone/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/serial.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/environment.o(.text)*/ - + cpu/mpc5xxx/start.o (.text) *(.text) *(.fixup) *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { + . = ALIGN(16); *(.rodata) *(.rodata1) *(.rodata.str1.4) - *(.eh_frame) } .fini : { *(.fini) } =0 .ctors : { *(.ctors) } .dtors : { *(.dtors) } /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; + . = (. + 0x0FFF) & 0xFFFFF000; _erotext = .; PROVIDE (erotext = .); .reloc : @@ -111,8 +78,8 @@ SECTIONS _FIXUP_TABLE_ = .; *(.fixup) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; .data : { @@ -126,22 +93,20 @@ SECTIONS _edata = .; PROVIDE (edata = .); - . = .; __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } __u_boot_cmd_end = .; - . = .; __start___ex_table = .; __ex_table : { *(__ex_table) } __stop___ex_table = .; - . = ALIGN(256); + . = ALIGN(4096); __init_begin = .; .text.init : { *(.text.init) } .data.init : { *(.data.init) } - . = ALIGN(256); + . = ALIGN(4096); __init_end = .; __bss_start = .; diff --git a/board/lpc2292sodimm/Makefile b/board/lpc2292sodimm/Makefile new file mode 100644 index 0000000..5a30198 --- /dev/null +++ b/board/lpc2292sodimm/Makefile @@ -0,0 +1,58 @@ +# +# (C) Copyright 2002 +# Sysgo Real-Time Solutions, GmbH <www.elinos.com> +# Marius Groeger <mgroeger@sysgo.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := lpc2292sodimm.o flash.o mmc.o spi.o mmc_hw.o eth.o +SOBJS := lowlevel_init.o iap_entry.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +# this MUST be compiled as thumb code! +iap_entry.o: + arm-linux-gcc -D__ASSEMBLY__ -g -Os -fno-strict-aliasing \ + -fno-common -ffixed-r8 -msoft-float -D__KERNEL__ \ + -DTEXT_BASE=0x81500000 -I/home/garyj/proj/LPC/u-boot/include \ + -fno-builtin -ffreestanding -nostdinc -isystem \ + /opt/eldk/arm/usr/bin/../lib/gcc/arm-linux/4.0.0/include -pipe \ + -DCONFIG_ARM -D__ARM__ -march=armv4t -mtune=arm7tdmi -mabi=apcs-gnu \ + -c -o iap_entry.o iap_entry.S + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/amcc/yellowstone/config.mk b/board/lpc2292sodimm/config.mk index 4ab0ea0..b28f418 100644 --- a/board/amcc/yellowstone/config.mk +++ b/board/lpc2292sodimm/config.mk @@ -1,5 +1,9 @@ # -# (C) Copyright 2002 +# (C) Copyright 2000 +# Sysgo Real-Time Solutions, GmbH <www.elinos.com> +# Marius Groeger <mgroeger@sysgo.de> +# +# (C) Copyright 2000 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -21,24 +25,6 @@ # MA 02111-1307 USA # -# -# esd ADCIOP boards -# - -#TEXT_BASE = 0x00001000 - -ifeq ($(ramsym),1) -TEXT_BASE = 0xFBD00000 -else -TEXT_BASE = 0xFFF80000 -endif - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 -endif +#address where u-boot will be relocated +#TEXT_BASE = 0x0 +TEXT_BASE = 0x81500000 diff --git a/board/lpc2292sodimm/eth.c b/board/lpc2292sodimm/eth.c new file mode 100644 index 0000000..249ab04 --- /dev/null +++ b/board/lpc2292sodimm/eth.c @@ -0,0 +1,885 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <net.h> +#include <asm/arch/hardware.h> +#include "spi.h" + +/* + * Control Registers in Bank 0 + */ + +#define CTL_REG_ERDPTL 0x00 +#define CTL_REG_ERDPTH 0x01 +#define CTL_REG_EWRPTL 0x02 +#define CTL_REG_EWRPTH 0x03 +#define CTL_REG_ETXSTL 0x04 +#define CTL_REG_ETXSTH 0x05 +#define CTL_REG_ETXNDL 0x06 +#define CTL_REG_ETXNDH 0x07 +#define CTL_REG_ERXSTL 0x08 +#define CTL_REG_ERXSTH 0x09 +#define CTL_REG_ERXNDL 0x0A +#define CTL_REG_ERXNDA 0x0B +#define CTL_REG_ERXRDPTL 0x0C +#define CTL_REG_ERXRDPTH 0x0D +#define CTL_REG_ERXWRPTL 0x0E +#define CTL_REG_ERXWRPTH 0x0F +#define CTL_REG_EDMASTL 0x10 +#define CTL_REG_EDMASTH 0x11 +#define CTL_REG_EDMANDL 0x12 +#define CTL_REG_EDMANDH 0x13 +#define CTL_REG_EDMADSTL 0x14 +#define CTL_REG_EDMADSTH 0x15 +#define CTL_REG_EDMACSL 0x16 +#define CTL_REG_EDMACSH 0x17 +/* these are common in all banks */ +#define CTL_REG_EIE 0x1B +#define CTL_REG_EIR 0x1C +#define CTL_REG_ESTAT 0x1D +#define CTL_REG_ECON2 0x1E +#define CTL_REG_ECON1 0x1F + +/* + * Control Registers in Bank 1 + */ + +#define CTL_REG_EHT0 0x00 +#define CTL_REG_EHT1 0x01 +#define CTL_REG_EHT2 0x02 +#define CTL_REG_EHT3 0x03 +#define CTL_REG_EHT4 0x04 +#define CTL_REG_EHT5 0x05 +#define CTL_REG_EHT6 0x06 +#define CTL_REG_EHT7 0x07 +#define CTL_REG_EPMM0 0x08 +#define CTL_REG_EPMM1 0x09 +#define CTL_REG_EPMM2 0x0A +#define CTL_REG_EPMM3 0x0B +#define CTL_REG_EPMM4 0x0C +#define CTL_REG_EPMM5 0x0D +#define CTL_REG_EPMM6 0x0E +#define CTL_REG_EPMM7 0x0F +#define CTL_REG_EPMCSL 0x10 +#define CTL_REG_EPMCSH 0x11 +#define CTL_REG_EPMOL 0x14 +#define CTL_REG_EPMOH 0x15 +#define CTL_REG_EWOLIE 0x16 +#define CTL_REG_EWOLIR 0x17 +#define CTL_REG_ERXFCON 0x18 +#define CTL_REG_EPKTCNT 0x19 + +/* + * Control Registers in Bank 2 + */ + +#define CTL_REG_MACON1 0x00 +#define CTL_REG_MACON2 0x01 +#define CTL_REG_MACON3 0x02 +#define CTL_REG_MACON4 0x03 +#define CTL_REG_MABBIPG 0x04 +#define CTL_REG_MAIPGL 0x06 +#define CTL_REG_MAIPGH 0x07 +#define CTL_REG_MACLCON1 0x08 +#define CTL_REG_MACLCON2 0x09 +#define CTL_REG_MAMXFLL 0x0A +#define CTL_REG_MAMXFLH 0x0B +#define CTL_REG_MAPHSUP 0x0D +#define CTL_REG_MICON 0x11 +#define CTL_REG_MICMD 0x12 +#define CTL_REG_MIREGADR 0x14 +#define CTL_REG_MIWRL 0x16 +#define CTL_REG_MIWRH 0x17 +#define CTL_REG_MIRDL 0x18 +#define CTL_REG_MIRDH 0x19 + +/* + * Control Registers in Bank 3 + */ + +#define CTL_REG_MAADR1 0x00 +#define CTL_REG_MAADR0 0x01 +#define CTL_REG_MAADR3 0x02 +#define CTL_REG_MAADR2 0x03 +#define CTL_REG_MAADR5 0x04 +#define CTL_REG_MAADR4 0x05 +#define CTL_REG_EBSTSD 0x06 +#define CTL_REG_EBSTCON 0x07 +#define CTL_REG_EBSTCSL 0x08 +#define CTL_REG_EBSTCSH 0x09 +#define CTL_REG_MISTAT 0x0A +#define CTL_REG_EREVID 0x12 +#define CTL_REG_ECOCON 0x15 +#define CTL_REG_EFLOCON 0x17 +#define CTL_REG_EPAUSL 0x18 +#define CTL_REG_EPAUSH 0x19 + + +/* + * PHY Register + */ + +#define PHY_REG_PHID1 0x02 +#define PHY_REG_PHID2 0x03 + + +/* + * Receive Filter Register (ERXFCON) bits + */ + +#define ENC_RFR_UCEN 0x80 +#define ENC_RFR_ANDOR 0x40 +#define ENC_RFR_CRCEN 0x20 +#define ENC_RFR_PMEN 0x10 +#define ENC_RFR_MPEN 0x08 +#define ENC_RFR_HTEN 0x04 +#define ENC_RFR_MCEN 0x02 +#define ENC_RFR_BCEN 0x01 + +/* + * ECON1 Register Bits + */ + +#define ENC_ECON1_TXRST 0x80 +#define ENC_ECON1_RXRST 0x40 +#define ENC_ECON1_DMAST 0x20 +#define ENC_ECON1_CSUMEN 0x10 +#define ENC_ECON1_TXRTS 0x08 +#define ENC_ECON1_RXEN 0x04 +#define ENC_ECON1_BSEL1 0x02 +#define ENC_ECON1_BSEL0 0x01 + +/* + * ECON2 Register Bits + */ +#define ENC_ECON2_AUTOINC 0x80 +#define ENC_ECON2_PKTDEC 0x40 +#define ENC_ECON2_PWRSV 0x20 +#define ENC_ECON2_VRPS 0x08 + +/* + * EIR Register Bits + */ +#define ENC_EIR_PKTIF 0x40 +#define ENC_EIR_DMAIF 0x20 +#define ENC_EIR_LINKIF 0x10 +#define ENC_EIR_TXIF 0x08 +#define ENC_EIR_WOLIF 0x04 +#define ENC_EIR_TXERIF 0x02 +#define ENC_EIR_RXERIF 0x01 + +/* + * ESTAT Register Bits + */ + +#define ENC_ESTAT_INT 0x80 +#define ENC_ESTAT_LATECOL 0x10 +#define ENC_ESTAT_RXBUSY 0x04 +#define ENC_ESTAT_TXABRT 0x02 +#define ENC_ESTAT_CLKRDY 0x01 + +/* + * EIE Register Bits + */ + +#define ENC_EIE_INTIE 0x80 +#define ENC_EIE_PKTIE 0x40 +#define ENC_EIE_DMAIE 0x20 +#define ENC_EIE_LINKIE 0x10 +#define ENC_EIE_TXIE 0x08 +#define ENC_EIE_WOLIE 0x04 +#define ENC_EIE_TXERIE 0x02 +#define ENC_EIE_RXERIE 0x01 + +/* + * MACON1 Register Bits + */ +#define ENC_MACON1_LOOPBK 0x10 +#define ENC_MACON1_TXPAUS 0x08 +#define ENC_MACON1_RXPAUS 0x04 +#define ENC_MACON1_PASSALL 0x02 +#define ENC_MACON1_MARXEN 0x01 + + +/* + * MACON2 Register Bits + */ +#define ENC_MACON2_MARST 0x80 +#define ENC_MACON2_RNDRST 0x40 +#define ENC_MACON2_MARXRST 0x08 +#define ENC_MACON2_RFUNRST 0x04 +#define ENC_MACON2_MATXRST 0x02 +#define ENC_MACON2_TFUNRST 0x01 + +/* + * MACON3 Register Bits + */ +#define ENC_MACON3_PADCFG2 0x80 +#define ENC_MACON3_PADCFG1 0x40 +#define ENC_MACON3_PADCFG0 0x20 +#define ENC_MACON3_TXCRCEN 0x10 +#define ENC_MACON3_PHDRLEN 0x08 +#define ENC_MACON3_HFRMEN 0x04 +#define ENC_MACON3_FRMLNEN 0x02 +#define ENC_MACON3_FULDPX 0x01 + +/* + * MICMD Register Bits + */ +#define ENC_MICMD_MIISCAN 0x02 +#define ENC_MICMD_MIIRD 0x01 + +/* + * MISTAT Register Bits + */ +#define ENC_MISTAT_NVALID 0x04 +#define ENC_MISTAT_SCAN 0x02 +#define ENC_MISTAT_BUSY 0x01 + +/* + * PHID1 and PHID2 values + */ +#define ENC_PHID1_VALUE 0x0083 +#define ENC_PHID2_VALUE 0x1400 +#define ENC_PHID2_MASK 0xFC00 + + +#define ENC_SPI_SLAVE_CS 0x00010000 /* pin P1.16 */ +#define ENC_RESET 0x00020000 /* pin P1.17 */ + +#define FAILSAFE_VALUE 5000 + +/* + * Controller memory layout: + * + * 0x0000 - 0x17ff 6k bytes receive buffer + * 0x1800 - 0x1fff 2k bytes transmit buffer + */ +/* Use the lower memory for receiver buffer. See errata pt. 5 */ +#define ENC_RX_BUF_START 0x0000 +#define ENC_TX_BUF_START 0x1800 + +/* maximum frame length */ +#define ENC_MAX_FRM_LEN 1518 + +#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS) +#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS) +#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8); + + +static unsigned char encReadReg (unsigned char regNo); +static void encWriteReg (unsigned char regNo, unsigned char data); +static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c); +static void encReadBuff (unsigned short length, unsigned char *pBuff); +static void encWriteBuff (unsigned short length, unsigned char *pBuff); +static void encBitSet (unsigned char regNo, unsigned char data); +static void encBitClr (unsigned char regNo, unsigned char data); +static void encReset (void); +static void encInit (unsigned char *pEthAddr); +static unsigned short phyRead (unsigned char addr); +static void encPoll (void); +static void encRx (void); + +#define m_nic_read(reg) encReadReg(reg) +#define m_nic_write(reg, data) encWriteReg(reg, data) +#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count) +#define m_nic_read_data(len, buf) encReadBuff((len), (buf)) +#define m_nic_write_data(len, buf) encWriteBuff((len), (buf)) + +/* bit field set */ +#define m_nic_bfs(reg, data) encBitSet(reg, data) + +/* bit field clear */ +#define m_nic_bfc(reg, data) encBitClr(reg, data) + +static unsigned char bank = 0; /* current bank in enc28j60 */ +static unsigned char next_pointer_lsb; +static unsigned char next_pointer_msb; + +static unsigned char buffer[ENC_MAX_FRM_LEN]; +static int rxResetCounter = 0; + +#define RX_RESET_COUNTER 1000; + +/*----------------------------------------------------------------------------- + * Returns 0 when failes otherwize 1 + */ +int eth_init (bd_t * bis) +{ + /* configure GPIO */ + (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS; + (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET; + + /* CS and RESET active low */ + PUT32 (IO1SET, ENC_SPI_SLAVE_CS); + PUT32 (IO1SET, ENC_RESET); + + spi_init (); + + /* initialize controller */ + encReset (); + encInit (bis->bi_enetaddr); + + m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */ + + return 0; +} + +int eth_send (volatile void *packet, int length) +{ + /* check frame length, etc. */ + /* TODO: */ + + /* switch to bank 0 */ + m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0)); + + /* set EWRPT */ + m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff)); + m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8)); + + /* set ETXST */ + m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF); + m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8); + + /* write packet */ + m_nic_write_data (length, (unsigned char *) packet); + + /* set ETXND */ + m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF); + m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8); + + /* set ECON1.TXRTS */ + m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS); + + return 0; +} + + +/***************************************************************************** + * This function resets the receiver only. This function may be called from + * interrupt-context. + */ +static void encReceiverReset (void) +{ + unsigned char econ1; + + econ1 = m_nic_read (CTL_REG_ECON1); + if ((econ1 & ENC_ECON1_RXRST) == 0) { + m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST); + rxResetCounter = RX_RESET_COUNTER; + } +} + +/***************************************************************************** + * receiver reset timer + */ +static void encReceiverResetCallback (void) +{ + m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST); + m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */ +} + +/*----------------------------------------------------------------------------- + * Check for received packets. Call NetReceive for each packet. The return + * value is ignored by the caller. + */ +int eth_rx (void) +{ + if (rxResetCounter > 0 && --rxResetCounter == 0) { + encReceiverResetCallback (); + } + + encPoll (); + + return 0; +} + +void eth_halt (void) +{ + m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN); /* disable receive */ +} + +/*****************************************************************************/ + +static void encPoll (void) +{ + unsigned char eir_reg; + volatile unsigned char estat_reg; + unsigned char pkt_cnt; + + /* clear global interrupt enable bit in enc28j60 */ + m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE); + estat_reg = m_nic_read (CTL_REG_ESTAT); + + eir_reg = m_nic_read (CTL_REG_EIR); + + if (eir_reg & ENC_EIR_TXIF) { + /* clear TXIF bit in EIR */ + m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF); + } + + /* We have to use pktcnt and not pktif bit, see errata pt. 6 */ + + /* move to bank 1 */ + m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1); + m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0); + + /* read pktcnt */ + pkt_cnt = m_nic_read (CTL_REG_EPKTCNT); + + if (pkt_cnt > 0) { + if ((eir_reg & ENC_EIR_PKTIF) == 0) { + /*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */ + } + encRx (); + /* clear PKTIF bit in EIR, this should not need to be done but it + seems like we get problems if we do not */ + m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF); + } + + if (eir_reg & ENC_EIR_RXERIF) { + printf ("encPoll: rx error\n"); + m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF); + } + if (eir_reg & ENC_EIR_TXERIF) { + printf ("encPoll: tx error\n"); + m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF); + } + + /* set global interrupt enable bit in enc28j60 */ + m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE); +} + +static void encRx (void) +{ + unsigned short pkt_len; + unsigned short copy_len; + unsigned short status; + unsigned char eir_reg; + unsigned char pkt_cnt = 0; + + /* switch to bank 0 */ + m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0)); + + m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb); + m_nic_write (CTL_REG_ERDPTH, next_pointer_msb); + + do { + m_nic_read_data (6, buffer); + next_pointer_lsb = buffer[0]; + next_pointer_msb = buffer[1]; + pkt_len = buffer[2]; + pkt_len |= (unsigned short) buffer[3] << 8; + status = buffer[4]; + status |= (unsigned short) buffer[5] << 8; + + if (pkt_len <= ENC_MAX_FRM_LEN) { + copy_len = pkt_len; + } else { + copy_len = 0; + /* p_priv->stats.rx_dropped++; */ + /* we will drop this packet */ + } + + if ((status & (1L << 7)) == 0) { /* check Received Ok bit */ + copy_len = 0; + /* p_priv->stats.rx_errors++; */ + } + + if (copy_len > 0) { + m_nic_read_data (copy_len, buffer); + } + + /* advance read pointer to next pointer */ + m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb); + m_nic_write (CTL_REG_ERDPTH, next_pointer_msb); + + /* decrease packet counter */ + m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC); + + /* move to bank 1 */ + m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1); + m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0); + + /* read pktcnt */ + pkt_cnt = m_nic_read (CTL_REG_EPKTCNT); + + /* switch to bank 0 */ + m_nic_bfc (CTL_REG_ECON1, + (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0)); + + if (copy_len == 0) { + eir_reg = m_nic_read (CTL_REG_EIR); + encReceiverReset (); + printf ("eth_rx: copy_len=0\n"); + continue; + } + + NetReceive ((unsigned char *) buffer, pkt_len); + + eir_reg = m_nic_read (CTL_REG_EIR); + } while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */ + m_nic_write (CTL_REG_ERXRDPTL, next_pointer_lsb); + m_nic_write (CTL_REG_ERXRDPTH, next_pointer_msb); +} + +static void encWriteReg (unsigned char regNo, unsigned char data) +{ + spi_lock (); + enc_cfg_spi (); + enc_enable (); + + spi_write (0x40 | regNo); /* write in regNo */ + spi_write (data); + + enc_disable (); + enc_enable (); + + spi_write (0x1f); /* write reg 0x1f */ + + enc_disable (); + spi_unlock (); +} + +static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c) +{ + unsigned char readback; + int i; + + spi_lock (); + + for (i = 0; i < c; i++) { + enc_cfg_spi (); + enc_enable (); + + spi_write (0x40 | regNo); /* write in regNo */ + spi_write (data); + + enc_disable (); + enc_enable (); + + spi_write (0x1f); /* write reg 0x1f */ + + enc_disable (); + + spi_unlock (); /* we must unlock spi first */ + + readback = encReadReg (regNo); + + spi_lock (); + + if (readback == data) + break; + } + spi_unlock (); + + if (i == c) { + printf ("enc28j60: write reg %d failed\n", regNo); + } +} + +static unsigned char encReadReg (unsigned char regNo) +{ + unsigned char rxByte; + + spi_lock (); + enc_cfg_spi (); + enc_enable (); + + spi_write (0x1f); /* read reg 0x1f */ + + bank = spi_read () & 0x3; + + enc_disable (); + enc_enable (); + + spi_write (regNo); + rxByte = spi_read (); + + /* check if MAC or MII register */ + if (((bank == 2) && (regNo <= 0x1a)) || + ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) { + /* ignore first byte and read another byte */ + rxByte = spi_read (); + } + + enc_disable (); + spi_unlock (); + + return rxByte; +} + +static void encReadBuff (unsigned short length, unsigned char *pBuff) +{ + spi_lock (); + enc_cfg_spi (); + enc_enable (); + + spi_write (0x20 | 0x1a); /* read buffer memory */ + + while (length--) { + if (pBuff != NULL) + *pBuff++ = spi_read (); + else + spi_write (0); + } + + enc_disable (); + spi_unlock (); +} + +static void encWriteBuff (unsigned short length, unsigned char *pBuff) +{ + spi_lock (); + enc_cfg_spi (); + enc_enable (); + + spi_write (0x60 | 0x1a); /* write buffer memory */ + + spi_write (0x00); /* control byte */ + + while (length--) + spi_write (*pBuff++); + + enc_disable (); + spi_unlock (); +} + +static void encBitSet (unsigned char regNo, unsigned char data) +{ + spi_lock (); + enc_cfg_spi (); + enc_enable (); + + spi_write (0x80 | regNo); /* bit field set */ + spi_write (data); + + enc_disable (); + spi_unlock (); +} + +static void encBitClr (unsigned char regNo, unsigned char data) +{ + spi_lock (); + enc_cfg_spi (); + enc_enable (); + + spi_write (0xA0 | regNo); /* bit field clear */ + spi_write (data); + + enc_disable (); + spi_unlock (); +} + +static void encReset (void) +{ + spi_lock (); + enc_cfg_spi (); + enc_enable (); + + spi_write (0xff); /* soft reset */ + + enc_disable (); + spi_unlock (); + + /* sleep 1 ms. See errata pt. 2 */ + udelay (1000); + +#if 0 + (*((volatile unsigned long *) IO1CLR)) &= ENC_RESET; + mdelay (5); + (*((volatile unsigned long *) IO1SET)) &= ENC_RESET; +#endif +} + +static void encInit (unsigned char *pEthAddr) +{ + unsigned short phid1 = 0; + unsigned short phid2 = 0; + + /* switch to bank 0 */ + m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0)); + + /* + * Setup the buffer space. The reset values are valid for the + * other pointers. + */ +#if 0 + /* We shall not write to ERXST, see errata pt. 5. Instead we + have to make sure that ENC_RX_BUS_START is 0. */ + m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1); + m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1); +#endif + m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1); + m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1); + + next_pointer_lsb = (ENC_RX_BUF_START & 0xFF); + next_pointer_msb = (ENC_RX_BUF_START >> 8); + + /* + * For tracking purposes, the ERXRDPT registers should be programmed with + * the same value. This is the read pointer. + */ + m_nic_write (CTL_REG_ERXRDPTL, (ENC_RX_BUF_START & 0xFF)); + m_nic_write_retry (CTL_REG_ERXRDPTH, (ENC_RX_BUF_START >> 8), 1); + + /* Setup receive filters. */ + + /* move to bank 1 */ + m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1); + m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0); + + /* OR-filtering, Unicast, CRC-check and broadcast */ + m_nic_write_retry (CTL_REG_ERXFCON, + (ENC_RFR_UCEN | ENC_RFR_CRCEN | ENC_RFR_BCEN), 1); + + /* Wait for Oscillator Start-up Timer (OST). */ + while ((m_nic_read (CTL_REG_ESTAT) & ENC_ESTAT_CLKRDY) == 0) { + static int cnt = 0; + + if (cnt++ >= 1000) { + cnt = 0; + } + } + + /* verify identification */ + phid1 = phyRead (PHY_REG_PHID1); + phid2 = phyRead (PHY_REG_PHID2); + + if (phid1 != ENC_PHID1_VALUE + || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) { + printf ("ERROR: failed to identify controller\n"); + printf ("phid1 = %x, phid2 = %x\n", + phid1, (phid2 & ENC_PHID2_MASK)); + printf ("should be phid1 = %x, phid2 = %x\n", + ENC_PHID1_VALUE, ENC_PHID2_VALUE); + } + + /* + * --- MAC Initialization --- + */ + + /* Pull MAC out of Reset */ + + /* switch to bank 2 */ + m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0); + m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1); + /* clear MAC reset bits */ + m_nic_write_retry (CTL_REG_MACON2, 0, 1); + + /* enable MAC to receive frames */ + m_nic_write_retry (CTL_REG_MACON1, ENC_MACON1_MARXEN, 10); + + /* configure pad, tx-crc and duplex */ + /* TODO maybe enable FRMLNEN */ + m_nic_write_retry (CTL_REG_MACON3, + (ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN), 10); + + /* set maximum frame length */ + m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10); + m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10); + + /* + * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex + * and 0x15 for full duplex. + */ + m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10); + + /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */ + m_nic_write_retry (CTL_REG_MAIPGL, 0x12, 10); + + /* + * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended + * 0x0c for half-duplex. Nothing for full-duplex + */ + m_nic_write_retry (CTL_REG_MAIPGH, 0x0C, 10); + + /* set MAC address */ + + /* switch to bank 3 */ + m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1)); + + m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1); + m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1); + m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1); + m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1); + m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1); + m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1); + + /* + * Receive settings + */ + + /* auto-increment RX-pointer when reading a received packet */ + m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_AUTOINC); + + /* enable interrupts */ + m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE); + m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE); + m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE); + m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE); + m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE); +} + +/***************************************************************************** + * + * Description: + * Read PHY registers. + * + * NOTE! This function will change to Bank 2. + * + * Params: + * [in] addr address of the register to read + * + * Returns: + * The value in the register + */ +static unsigned short phyRead (unsigned char addr) +{ + unsigned short ret = 0; + + /* move to bank 2 */ + m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0); + m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1); + + /* write address to MIREGADR */ + m_nic_write (CTL_REG_MIREGADR, addr); + + /* set MICMD.MIIRD */ + m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD); + + /* poll MISTAT.BUSY bit until operation is complete */ + while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) { + static int cnt = 0; + + if (cnt++ >= 1000) { + /* GJ - this seems extremely dangerous! */ + /* printf("#"); */ + cnt = 0; + } + } + + /* clear MICMD.MIIRD */ + m_nic_write (CTL_REG_MICMD, 0); + + ret = (m_nic_read (CTL_REG_MIRDH) << 8); + ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF); + + return ret; +} diff --git a/board/lpc2292sodimm/flash.c b/board/lpc2292sodimm/flash.c new file mode 100644 index 0000000..55aaabf --- /dev/null +++ b/board/lpc2292sodimm/flash.c @@ -0,0 +1,476 @@ +/* + * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/hardware.h> + +/* IAP commands use 32 bytes at the top of CPU internal sram, we + use 512 bytes below that */ +#define COPY_BUFFER_LOCATION 0x40003de0 + +#define IAP_LOCATION 0x7ffffff1 +#define IAP_CMD_PREPARE 50 +#define IAP_CMD_COPY 51 +#define IAP_CMD_ERASE 52 +#define IAP_CMD_CHECK 53 +#define IAP_CMD_ID 54 +#define IAP_CMD_VERSION 55 +#define IAP_CMD_COMPARE 56 + +#define IAP_RET_CMD_SUCCESS 0 + +#define SST_BASEADDR 0x80000000 +#define SST_ADDR1 ((volatile ushort*)(SST_BASEADDR + (0x5555 << 1))) +#define SST_ADDR2 ((volatile ushort*)(SST_BASEADDR + (0x2AAA << 1))) + + +static unsigned long command[5]; +static unsigned long result[2]; + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +extern void iap_entry(unsigned long * command, unsigned long * result); + +/*----------------------------------------------------------------------- + * + */ +int get_flash_sector(flash_info_t * info, ulong flash_addr) +{ + int i; + + for(i=1; i < (info->sector_count); i++) { + if (flash_addr < (info->start[i])) + break; + } + + return (i-1); +} + +/*----------------------------------------------------------------------- + * This function assumes that flash_addr is aligned on 512 bytes boundary + * in flash. This function also assumes that prepare have been called + * for the sector in question. + */ +int copy_buffer_to_flash(flash_info_t * info, ulong flash_addr) +{ + int first_sector; + int last_sector; + + first_sector = get_flash_sector(info, flash_addr); + last_sector = get_flash_sector(info, flash_addr + 512 - 1); + + /* prepare sectors for write */ + command[0] = IAP_CMD_PREPARE; + command[1] = first_sector; + command[2] = last_sector; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP prepare failed\n"); + return ERR_PROG_ERROR; + } + + command[0] = IAP_CMD_COPY; + command[1] = flash_addr; + command[2] = COPY_BUFFER_LOCATION; + command[3] = 512; + command[4] = CFG_SYS_CLK_FREQ >> 10; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP copy failed\n"); + return 1; + } + + return 0; +} + +/*----------------------------------------------------------------------- + * + */ +void write_word_sst(ulong addr, ushort data) +{ + ushort tmp; + + *SST_ADDR1 = 0x00AA; + *SST_ADDR2 = 0x0055; + *SST_ADDR1 = 0x00A0; + *((volatile ushort*)addr) = data; + /* do data polling */ + do { + tmp = *((volatile ushort*)addr); + } while (tmp != data); +} + +/*----------------------------------------------------------------------- + */ + +ulong flash_init (void) +{ + int j, k; + ulong size = 0; + ulong flashbase = 0; + + flash_info[0].flash_id = (PHILIPS_LPC2292 & FLASH_VENDMASK); + flash_info[0].size = 0x003E000; /* 256 - 8 KB */ + flash_info[0].sector_count = 17; + memset (flash_info[0].protect, 0, 17); + flashbase = 0x00000000; + for (j = 0, k = 0; j < 8; j++, k++) { + flash_info[0].start[k] = flashbase; + flashbase += 0x00002000; + } + for (j = 0; j < 2; j++, k++) { + flash_info[0].start[k] = flashbase; + flashbase += 0x00010000; + } + for (j = 0; j < 7; j++, k++) { + flash_info[0].start[k] = flashbase; + flashbase += 0x00002000; + } + size += flash_info[0].size; + + flash_info[1].flash_id = (SST_MANUFACT & FLASH_VENDMASK); + flash_info[1].size = 0x00200000; /* 2 MB */ + flash_info[1].sector_count = 512; + memset (flash_info[1].protect, 0, 512); + flashbase = SST_BASEADDR; + for (j=0; j<512; j++) { + flash_info[1].start[j] = flashbase; + flashbase += 0x1000; /* 4 KB sectors */ + } + size += flash_info[1].size; + + /* Protect monitor and environment sectors */ + flash_protect (FLAG_PROTECT_SET, + 0x0, + 0x0 + monitor_flash_len - 1, + &flash_info[0]); + + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, + &flash_info[0]); + + return size; +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ + int i; + int erased = 0; + unsigned long j; + unsigned long count; + unsigned char *p; + + switch (info->flash_id & FLASH_VENDMASK) { + case (SST_MANUFACT & FLASH_VENDMASK): + printf("SST: "); + break; + case (PHILIPS_LPC2292 & FLASH_VENDMASK): + printf("Philips: "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + printf (" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + printf ("\n "); + } + if (i < (info->sector_count - 1)) { + count = info->start[i+1] - info->start[i]; + } + else { + count = info->start[0] + info->size - info->start[i]; + } + p = (unsigned char*)(info->start[i]); + erased = 1; + for (j = 0; j < count; j++) { + if (*p != 0xFF) { + erased = 0; + break; + } + p++; + } + printf (" %08lX%s%s", info->start[i], info->protect[i] ? " RO" : " ", + erased ? " E" : " "); + } + printf ("\n"); +} + +/*----------------------------------------------------------------------- + */ + +int flash_erase_philips (flash_info_t * info, int s_first, int s_last) +{ + int flag; + int prot; + int sect; + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) + return ERR_PROTECTED; + + + flag = disable_interrupts(); + + printf ("Erasing %d sectors starting at sector %2d.\n" + "This make take some time ... ", + s_last - s_first + 1, s_first); + + command[0] = IAP_CMD_PREPARE; + command[1] = s_first; + command[2] = s_last; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP prepare failed\n"); + return ERR_PROTECTED; + } + + command[0] = IAP_CMD_ERASE; + command[1] = s_first; + command[2] = s_last; + command[3] = CFG_SYS_CLK_FREQ >> 10; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP erase failed\n"); + return ERR_PROTECTED; + } + + if (flag) + enable_interrupts(); + + return ERR_OK; +} + +int flash_erase_sst (flash_info_t * info, int s_first, int s_last) +{ + int i; + + for (i = s_first; i <= s_last; i++) { + *SST_ADDR1 = 0x00AA; + *SST_ADDR2 = 0x0055; + *SST_ADDR1 = 0x0080; + *SST_ADDR1 = 0x00AA; + *SST_ADDR2 = 0x0055; + *((volatile ushort*)(info->start[i])) = 0x0030; + /* wait for erase to finish */ + udelay(25000); + } + + return ERR_OK; +} + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + switch (info->flash_id & FLASH_VENDMASK) { + case (SST_MANUFACT & FLASH_VENDMASK): + return flash_erase_sst(info, s_first, s_last); + case (PHILIPS_LPC2292 & FLASH_VENDMASK): + return flash_erase_philips(info, s_first, s_last); + default: + return ERR_PROTECTED; + } + return ERR_PROTECTED; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash. + * + * cnt is in bytes + */ + +int write_buff_sst (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ushort tmp; + ulong i; + uchar* src_org; + uchar* dst_org; + ulong cnt_org = cnt; + int ret = ERR_OK; + + src_org = src; + dst_org = (uchar*)addr; + + if (addr & 1) { /* if odd address */ + tmp = *((uchar*)(addr - 1)); /* little endian */ + tmp |= (*src << 8); + write_word_sst(addr - 1, tmp); + addr += 1; + cnt -= 1; + src++; + } + while (cnt > 1) { + tmp = ((*(src+1)) << 8) + (*src); /* little endian */ + write_word_sst(addr, tmp); + addr += 2; + src += 2; + cnt -= 2; + } + if (cnt > 0) { + tmp = (*((uchar*)(addr + 1))) << 8; + tmp |= *src; + write_word_sst(addr, tmp); + } + + for (i = 0; i < cnt_org; i++) { + if (*dst_org != *src_org) { + printf("Write failed. Byte %lX differs\n", i); + ret = ERR_PROG_ERROR; + break; + } + dst_org++; + src_org++; + } + + return ret; +} + +int write_buff_philips (flash_info_t * info, + uchar * src, + ulong addr, + ulong cnt) +{ + int first_copy_size; + int last_copy_size; + int first_block; + int last_block; + int nbr_mid_blocks; + uchar memmap_value; + ulong i; + uchar* src_org; + uchar* dst_org; + int ret = ERR_OK; + + src_org = src; + dst_org = (uchar*)addr; + + first_block = addr / 512; + last_block = (addr + cnt) / 512; + nbr_mid_blocks = last_block - first_block - 1; + + first_copy_size = 512 - (addr % 512); + last_copy_size = (addr + cnt) % 512; + +#if 0 + printf("\ncopy first block: (1) %lX -> %lX 0x200 bytes, " + "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n", + (ulong)(first_block * 512), + (ulong)COPY_BUFFER_LOCATION, + (ulong)src, + (ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size), + first_copy_size, + (ulong)COPY_BUFFER_LOCATION, + (ulong)(first_block * 512)); +#endif + + /* copy first block */ + memcpy((void*)COPY_BUFFER_LOCATION, + (void*)(first_block * 512), 512); + memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size), + src, first_copy_size); + copy_buffer_to_flash(info, first_block * 512); + src += first_copy_size; + addr += first_copy_size; + + /* copy middle blocks */ + for (i = 0; i < nbr_mid_blocks; i++) { +#if 0 + printf("copy middle block: %lX -> %lX 512 bytes, " + "%lX -> %lX 512 bytes\n", + (ulong)src, + (ulong)COPY_BUFFER_LOCATION, + (ulong)COPY_BUFFER_LOCATION, + (ulong)addr); +#endif + memcpy((void*)COPY_BUFFER_LOCATION, src, 512); + copy_buffer_to_flash(info, addr); + src += 512; + addr += 512; + } + + + if (last_copy_size > 0) { +#if 0 + printf("copy last block: (1) %lX -> %lX 0x200 bytes, " + "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n", + (ulong)(last_block * 512), + (ulong)COPY_BUFFER_LOCATION, + (ulong)src, + (ulong)(COPY_BUFFER_LOCATION), + last_copy_size, + (ulong)COPY_BUFFER_LOCATION, + (ulong)addr); +#endif + /* copy last block */ + memcpy((void*)COPY_BUFFER_LOCATION, + (void*)(last_block * 512), 512); + memcpy((void*)COPY_BUFFER_LOCATION, + src, last_copy_size); + copy_buffer_to_flash(info, addr); + } + + /* verify write */ + memmap_value = GET8(MEMMAP); + + disable_interrupts(); + + PUT8(MEMMAP, 01); /* we must make sure that initial 64 + bytes are taken from flash when we + do the compare */ + + for (i = 0; i < cnt; i++) { + if (*dst_org != *src_org){ + printf("Write failed. Byte %lX differs\n", i); + ret = ERR_PROG_ERROR; + break; + } + dst_org++; + src_org++; + } + + PUT8(MEMMAP, memmap_value); + enable_interrupts(); + + return ret; +} + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + switch (info->flash_id & FLASH_VENDMASK) { + case (SST_MANUFACT & FLASH_VENDMASK): + return write_buff_sst(info, src, addr, cnt); + case (PHILIPS_LPC2292 & FLASH_VENDMASK): + return write_buff_philips(info, src, addr, cnt); + default: + return ERR_PROG_ERROR; + } + return ERR_PROG_ERROR; +} diff --git a/board/lpc2292sodimm/iap_entry.S b/board/lpc2292sodimm/iap_entry.S new file mode 100644 index 0000000..c31d519 --- /dev/null +++ b/board/lpc2292sodimm/iap_entry.S @@ -0,0 +1,7 @@ +IAP_ADDRESS: .word 0x7FFFFFF1 + +.globl iap_entry +iap_entry: + ldr r2, IAP_ADDRESS + bx r2 + mov pc, lr diff --git a/board/lpc2292sodimm/lowlevel_init.S b/board/lpc2292sodimm/lowlevel_init.S new file mode 100644 index 0000000..a0e9747 --- /dev/null +++ b/board/lpc2292sodimm/lowlevel_init.S @@ -0,0 +1,87 @@ +/* + * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/hardware.h> + +/* some parameters for the board */ +/* setting up the memory */ +#define SRAM_START 0x40000000 +#define SRAM_SIZE 0x00004000 +#define BCFG0_VALUE 0x1000ffef +#define BCFG1_VALUE 0x10001C61 + +_TEXT_BASE: + .word TEXT_BASE +MEMMAP_ADR: + .word MEMMAP +BCFG0_ADR: + .word BCFG0 +_BCFG0_VALUE: + .word BCFG0_VALUE +BCFG1_ADR: + .word BCFG1 +_BCFG1_VALUE: + .word BCFG1_VALUE +PINSEL2_ADR: + .word PINSEL2 +PINSEL2_MASK: + .word 0x00000000 +PINSEL2_VALUE: + .word 0x0F800914 + +.extern _start + +.globl lowlevel_init +lowlevel_init: + /* set up memory control register for bank 0 */ + ldr r0, _BCFG0_VALUE + ldr r1, BCFG0_ADR + str r0, [r1] + + /* set up memory control register for bank 1 */ + ldr r0, _BCFG1_VALUE + ldr r1, BCFG1_ADR + str r0, [r1] + + /* set up PINSEL2 for bus-pins */ + ldr r0, PINSEL2_ADR + ldr r1, [r0] + ldr r2, PINSEL2_MASK + ldr r3, PINSEL2_VALUE + and r1, r1, r2 + orr r1, r1, r3 + str r1, [r0] + + /* move vectors to beginning of SRAM */ + mov r2, #SRAM_START + mov r0, #0 /*_start*/ + ldmneia r0!, {r3-r10} + stmneia r2!, {r3-r10} + ldmneia r0, {r3-r9} + stmneia r2, {r3-r9} + + /* Set-up MEMMAP register, so vectors are taken from SRAM */ + ldr r0, MEMMAP_ADR + mov r1, #0x02 /* vectors re-mapped to static RAM */ + str r1, [r0] + + /* everything is fine now */ + mov pc, lr diff --git a/board/lpc2292sodimm/lpc2292sodimm.c b/board/lpc2292sodimm/lpc2292sodimm.c new file mode 100644 index 0000000..de04c66 --- /dev/null +++ b/board/lpc2292sodimm/lpc2292sodimm.c @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com> + * Armadillo board HT1070 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <clps7111.h> + +/* ------------------------------------------------------------------------- */ + + +/* + * Miscelaneous platform dependent initialisations + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* Activate LED flasher */ + IO_LEDFLSH = 0x40; + + /* arch number MACH_TYPE_ARMADILLO - not official*/ + gd->bd->bi_arch_number = 83; + + /* location of boot parameters */ + gd->bd->bi_boot_params = 0xc0000100; + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return (0); +} diff --git a/board/lpc2292sodimm/mmc.c b/board/lpc2292sodimm/mmc.c new file mode 100644 index 0000000..1c0922f --- /dev/null +++ b/board/lpc2292sodimm/mmc.c @@ -0,0 +1,154 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <mmc.h> +#include <asm/errno.h> +#include <asm/arch/hardware.h> +#include <part.h> +#include <fat.h> +#include "mmc_hw.h" +#include "spi.h" + +#ifdef CONFIG_MMC + +#undef MMC_DEBUG + +static block_dev_desc_t mmc_dev; + +/* these are filled out by a call to mmc_hw_get_parameters */ +static int hw_size; /* in kbytes */ +static int hw_nr_sects; +static int hw_sect_size; /* in bytes */ + +block_dev_desc_t * mmc_get_dev(int dev) +{ + return (block_dev_desc_t *)(&mmc_dev); +} + +unsigned long mmc_block_read(int dev, + unsigned long start, + lbaint_t blkcnt, + unsigned long *buffer) +{ + unsigned long rc = 0; + unsigned char *p = (unsigned char *)buffer; + unsigned long i; + unsigned long addr = start; + +#ifdef MMC_DEBUG + printf("mmc_block_read: start=%lu, blkcnt=%lu\n", start, + (unsigned long)blkcnt); +#endif + + for(i = 0; i < (unsigned long)blkcnt; i++) { +#ifdef MMC_DEBUG + printf("mmc_read_sector: addr=%lu, buffer=%p\n", addr, p); +#endif + (void)mmc_read_sector(addr, p); + rc++; + addr++; + p += hw_sect_size; + } + + return rc; +} + +/*----------------------------------------------------------------------------- + * Read hardware paramterers (sector size, size, number of sectors) + */ +static int mmc_hw_get_parameters(void) +{ + unsigned char csddata[16]; + unsigned int sizemult; + unsigned int size; + + mmc_read_csd(csddata); + hw_sect_size = 1<<(csddata[5] & 0x0f); + size = ((csddata[6]&0x03)<<10)+(csddata[7]<<2)+(csddata[8]&0xc0); + sizemult = ((csddata[10] & 0x80)>>7)+((csddata[9] & 0x03)<<1); + hw_nr_sects = (size+1)*(1<<(sizemult+2)); + hw_size = hw_nr_sects*hw_sect_size/1024; + +#ifdef MMC_DEBUG + printf("mmc_hw_get_parameters: hw_sect_size=%d, hw_nr_sects=%d, " + "hw_size=%d\n", hw_sect_size, hw_nr_sects, hw_size); +#endif + + return 0; +} + +int mmc_init(int verbose) +{ + int ret = -ENODEV; + + if (verbose) + printf("mmc_init\n"); + + spi_init(); + mmc_hw_init(); + + mmc_hw_get_parameters(); + + mmc_dev.if_type = IF_TYPE_MMC; + mmc_dev.part_type = PART_TYPE_DOS; + mmc_dev.dev = 0; + mmc_dev.lun = 0; + mmc_dev.type = 0; + mmc_dev.blksz = hw_sect_size; + mmc_dev.lba = hw_nr_sects; + sprintf((char*)mmc_dev.vendor, "Unknown vendor"); + sprintf((char*)mmc_dev.product, "Unknown product"); + sprintf((char*)mmc_dev.revision, "N/A"); + mmc_dev.removable = 0; /* should be true??? */ + mmc_dev.block_read = mmc_block_read; + + fat_register_device(&mmc_dev, 1); + + ret = 0; + + return ret; +} + +int mmc_write(uchar * src, ulong dst, int size) +{ +#ifdef MMC_DEBUG + printf("mmc_write: src=%p, dst=%lu, size=%u\n", src, dst, size); +#endif + /* Since mmc2info always returns 0 this function will never be called */ + return 0; +} + +int mmc_read(ulong src, uchar * dst, int size) +{ +#ifdef MMC_DEBUG + printf("mmc_read: src=%lu, dst=%p, size=%u\n", src, dst, size); +#endif + /* Since mmc2info always returns 0 this function will never be called */ + return 0; +} + +int mmc2info(ulong addr) +{ + /* This function is used by cmd_cp to determine if source or destination + address resides on MMC-card or not. We do not support copy to and from + MMC-card so we always return 0. */ + return 0; +} + +#endif /* CONFIG_MMC */ diff --git a/board/lpc2292sodimm/mmc_hw.c b/board/lpc2292sodimm/mmc_hw.c new file mode 100644 index 0000000..31f2a79 --- /dev/null +++ b/board/lpc2292sodimm/mmc_hw.c @@ -0,0 +1,233 @@ +/* + This code was original written by Ulrich Radig and modified by + Embedded Artists AB (www.embeddedartists.com). + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <config.h> +#include <common.h> +#include <asm/arch/hardware.h> +#include "spi.h" + +#define MMC_Enable() PUT32(IO1CLR, 1l << 22) +#define MMC_Disable() PUT32(IO1SET, 1l << 22) +#define mmc_spi_cfg() spi_set_clock(8); spi_set_cfg(0, 1, 0); + +static unsigned char Write_Command_MMC (unsigned char *CMD); +static void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, + unsigned short int Bytes); + +/* initialize the hardware */ +int mmc_hw_init(void) +{ + unsigned long a; + unsigned short int Timeout = 0; + unsigned char b; + unsigned char CMD[] = {0x40, 0x00, 0x00, 0x00, 0x00, 0x95}; + + /* set-up GPIO and SPI */ + (*((volatile unsigned long *)PINSEL2)) &= ~(1l << 3); /* clear bit 3 */ + (*((volatile unsigned long *)IO1DIR)) |= (1l << 22); /* set bit 22 (output) */ + + MMC_Disable(); + + spi_lock(); + spi_set_clock(248); + spi_set_cfg(0, 1, 0); + MMC_Enable(); + + /* waste some time */ + for(a=0; a < 20000; a++) + asm("nop"); + + /* Put the MMC/SD-card into SPI-mode */ + for (b = 0; b < 10; b++) /* Sends min 74+ clocks to the MMC/SD-card */ + spi_write(0xff); + + /* Sends command CMD0 to MMC/SD-card */ + while (Write_Command_MMC(CMD) != 1) { + if (Timeout++ > 200) { + MMC_Disable(); + spi_unlock(); + return(1); /* Abort with command 1 (return 1) */ + } + } + /* Sends Command CMD1 an MMC/SD-card */ + Timeout = 0; + CMD[0] = 0x41;/* Command 1 */ + CMD[5] = 0xFF; + + while (Write_Command_MMC(CMD) != 0) { + if (Timeout++ > 200) { + MMC_Disable(); + spi_unlock(); + return (2); /* Abort with command 2 (return 2) */ + } + } + + MMC_Disable(); + spi_unlock(); + + return 0; +} + +/* ############################################################################ + Sends a command to the MMC/SD-card + ######################################################################### */ +static unsigned char Write_Command_MMC (unsigned char *CMD) +{ + unsigned char a, tmp = 0xff; + unsigned short int Timeout = 0; + + MMC_Disable(); + spi_write(0xFF); + MMC_Enable(); + + for (a = 0; a < 0x06; a++) + spi_write(*CMD++); + + while (tmp == 0xff) { + tmp = spi_read(); + if (Timeout++ > 5000) + break; + } + + return (tmp); +} + +/* ############################################################################ + Routine to read the CID register from the MMC/SD-card (16 bytes) + ######################################################################### */ +void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, unsigned short + int Bytes) +{ + unsigned short int a; + + spi_lock(); + mmc_spi_cfg(); + MMC_Enable(); + + if (Write_Command_MMC(CMD) != 0) { + MMC_Disable(); + spi_unlock(); + return; + } + + while (spi_read() != 0xfe) {}; + for (a = 0; a < Bytes; a++) + *Buffer++ = spi_read(); + + /* Read the CRC-byte */ + spi_read(); /* CRC - byte is discarded */ + spi_read(); /* CRC - byte is discarded */ + /* set MMC_Chip_Select to high (MMC/SD-card Inaktiv) */ + MMC_Disable(); + spi_unlock(); + + return; +} + +/* ############################################################################ + Routine to read a block (512 bytes) from the MMC/SD-card + ######################################################################### */ +unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer) +{ + /* Command 16 to read aBlocks from the MMC/SD - caed */ + unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF}; + + /* The addres on the MMC/SD-card is in bytes, + addr is transformed from blocks to bytes and the result is + placed into the command */ + + addr = addr << 9; /* addr = addr * 512 */ + + CMD[1] = ((addr & 0xFF000000) >> 24); + CMD[2] = ((addr & 0x00FF0000) >> 16); + CMD[3] = ((addr & 0x0000FF00) >> 8 ); + + MMC_Read_Block(CMD, Buffer, 512); + + return (0); +} + +/* ############################################################################ + Routine to write a block (512 byte) to the MMC/SD-card + ######################################################################### */ +unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer) +{ + unsigned char tmp, a; + unsigned short int b; + /* Command 24 to write a block to the MMC/SD - card */ + unsigned char CMD[] = {0x58, 0x00, 0x00, 0x00, 0x00, 0xFF}; + + /* The addres on the MMC/SD-card is in bytes, + addr is transformed from blocks to bytes and the result is + placed into the command */ + + addr = addr << 9; /* addr = addr * 512 */ + + CMD[1] = ((addr & 0xFF000000) >> 24); + CMD[2] = ((addr & 0x00FF0000) >> 16); + CMD[3] = ((addr & 0x0000FF00) >> 8 ); + + spi_lock(); + mmc_spi_cfg(); + MMC_Enable(); + + /* Send command CMD24 to the MMC/SD-card (Write 1 Block/512 Bytes) */ + tmp = Write_Command_MMC(CMD); + if (tmp != 0) { + MMC_Disable(); + spi_unlock(); + return(tmp); + } + + /* Do a short delay and send a clock-pulse to the MMC/SD-card */ + for (a = 0; a < 100; a++) + spi_read(); + + /* Send a start byte to the MMC/SD-card */ + spi_write(0xFE); + + /* Write the block (512 bytes) to the MMC/SD-card */ + for (b = 0; b < 512; b++) + spi_write(*Buffer++); + + /* write the CRC-Byte */ + spi_write(0xFF); /* write a dummy CRC */ + spi_write(0xFF); /* CRC code is not used */ + + /* Wait for MMC/SD-card busy */ + while (spi_read() != 0xff) {}; + + /* set MMC_Chip_Select to high (MMC/SD-card inactive) */ + MMC_Disable(); + spi_unlock(); + return (0); +} + +/* ######################################################################### + Routine to read the CSD register from the MMC/SD-card (16 bytes) + ######################################################################### */ +unsigned char mmc_read_csd (unsigned char *Buffer) +{ + /* Command to read the CSD register */ + unsigned char CMD[] = {0x49, 0x00, 0x00, 0x00, 0x00, 0xFF}; + + MMC_Read_Block(CMD, Buffer, 16); + + return (0); +} diff --git a/board/lpc2292sodimm/mmc_hw.h b/board/lpc2292sodimm/mmc_hw.h new file mode 100644 index 0000000..3687dbf --- /dev/null +++ b/board/lpc2292sodimm/mmc_hw.h @@ -0,0 +1,29 @@ +/* + This module implements a linux character device driver for the 24c256 chip. + Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef _MMC_HW_ +#define _MMC_HW_ + +unsigned char mmc_read_csd(unsigned char *Buffer); +unsigned char mmc_read_sector (unsigned long addr, + unsigned char *Buffer); +unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer); +int mmc_hw_init(void); + +#endif /* _MMC_HW_ */ diff --git a/board/lpc2292sodimm/spi.c b/board/lpc2292sodimm/spi.c new file mode 100644 index 0000000..4ba1468 --- /dev/null +++ b/board/lpc2292sodimm/spi.c @@ -0,0 +1,40 @@ +/* + This module implements an interface to the SPI on the lpc22xx. + Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <config.h> +#include <common.h> +#include <asm/errno.h> +#include <asm/arch/hardware.h> +#include "spi.h" + +unsigned long spi_flags; +unsigned char spi_idle = 0x00; + +int spi_init(void) +{ + unsigned long pinsel0_value; + + /* activate spi pins */ + pinsel0_value = GET32(PINSEL0); + pinsel0_value &= ~(0xFFl << 8); + pinsel0_value |= (0x55l << 8); + PUT32(PINSEL0, pinsel0_value); + + return 0; +} diff --git a/board/lpc2292sodimm/spi.h b/board/lpc2292sodimm/spi.h new file mode 100644 index 0000000..6ae66e8 --- /dev/null +++ b/board/lpc2292sodimm/spi.h @@ -0,0 +1,82 @@ +/* + This file defines the interface to the lpc22xx SPI module. + Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com) + + This file may be included in software not adhering to the GPL. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef SPI_H +#define SPI_H + +#include <config.h> +#include <common.h> +#include <asm/errno.h> +#include <asm/arch/hardware.h> + +#define SPIF 0x80 + +#define spi_lock() disable_interrupts(); +#define spi_unlock() enable_interrupts(); + +extern unsigned long spi_flags; +extern unsigned char spi_idle; + +int spi_init(void); + +static inline unsigned char spi_read(void) +{ + unsigned char b; + + PUT8(S0SPDR, spi_idle); + while (!(GET8(S0SPSR) & SPIF)); + b = GET8(S0SPDR); + + return b; +} + +static inline void spi_write(unsigned char b) +{ + PUT8(S0SPDR, b); + while (!(GET8(S0SPSR) & SPIF)); + GET8(S0SPDR); /* this will clear the SPIF bit */ +} + +static inline void spi_set_clock(unsigned char clk_value) +{ + PUT8(S0SPCCR, clk_value); +} + +static inline void spi_set_cfg(unsigned char phase, + unsigned char polarity, + unsigned char lsbf) +{ + unsigned char v = 0x20; /* master bit set */ + + if (phase) + v |= 0x08; /* set phase bit */ + if (polarity) { + v |= 0x10; /* set polarity bit */ + spi_idle = 0xFF; + } else { + spi_idle = 0x00; + } + if (lsbf) + v |= 0x40; /* set lsbf bit */ + + PUT8(S0SPCR, v); +} +#endif /* SPI_H */ diff --git a/board/lpc2292sodimm/u-boot.lds b/board/lpc2292sodimm/u-boot.lds new file mode 100644 index 0000000..64d946c --- /dev/null +++ b/board/lpc2292sodimm/u-boot.lds @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm720t/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c index a5b6de7..60c1aa9 100644 --- a/cpu/arm720t/cpu.c +++ b/cpu/arm720t/cpu.c @@ -73,7 +73,7 @@ int cleanup_before_linux (void) /* go to high speed */ IO_SYSCON3 = (IO_SYSCON3 & ~CLKCTL) | CLKCTL_73; #endif -#elif defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) +#elif defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) || defined(CONFIG_LPC2292) disable_interrupts (); /* Nothing more needed */ #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) @@ -252,6 +252,7 @@ int dcache_status (void) void icache_enable (void) { } +#elif defined(CONFIG_LPC2292) /* just to satisfy the compiler */ #else #error No icache/dcache enable/disable functions defined for this CPU type #endif diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c index da62502..8f32124 100644 --- a/cpu/arm720t/interrupts.c +++ b/cpu/arm720t/interrupts.c @@ -36,6 +36,12 @@ #define TIMER_LOAD_VAL 0xffff /* macro to read the 16 bit timer */ #define READ_TIMER (IO_TC1D & 0xffff) + +#ifdef CONFIG_LPC2292 +#undef READ_TIMER +#define READ_TIMER (0xFFFFFFFF - GET32(T0TC)) +#endif + #else #define IRQEN (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE)) #define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL)) @@ -195,6 +201,13 @@ void do_irq (struct pt_regs *pt_regs) } #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* No do_irq() for IntegratorAP/CM720T as yet */ +#elif defined(CONFIG_LPC2292) + + void (*pfnct)(void); + + pfnct = (void (*)(void))VICVectAddr; + + (*pfnct)(); #else #error do_irq() not defined for this CPU type #endif @@ -293,6 +306,13 @@ int interrupt_init (void) /* Start timer */ SET_REG( REG_TMOD, TM0_RUN); +#elif defined(CONFIG_LPC2292) + PUT32(T0IR, 0); /* disable all timer0 interrupts */ + PUT32(T0TCR, 0); /* disable timer0 */ + PUT32(T0PR, CFG_SYS_CLK_FREQ / CFG_HZ); + PUT32(T0MCR, 0); + PUT32(T0TC, 0); + PUT32(T0TCR, 1); /* enable timer0 */ #else #error No interrupt_init() defined for this CPU type @@ -309,7 +329,7 @@ int interrupt_init (void) */ -#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO) +#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO) || defined(CONFIG_LPC2292) void reset_timer (void) { @@ -337,7 +357,12 @@ void udelay (unsigned long usec) tmo += get_timer (0); while (get_timer_masked () < tmo) +#ifdef CONFIG_LPC2292 + /* GJ - not sure whether this is really needed or a misunderstanding */ + __asm__ __volatile__(" nop"); +#else /*NOP*/; +#endif } void reset_timer_masked (void) diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c index 054bab9..15c54af 100644 --- a/cpu/arm720t/serial.c +++ b/cpu/arm720t/serial.c @@ -123,4 +123,80 @@ serial_puts (const char *s) } } -#endif /* defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) */ +#elif defined(CONFIG_LPC2292) + +#include <asm/arch/hardware.h> + +void serial_setbrg (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + unsigned short divisor = 0; + + switch (gd->baudrate) { + case 1200: divisor = 3072; break; + case 9600: divisor = 384; break; + case 19200: divisor = 192; break; + case 38400: divisor = 96; break; + case 57600: divisor = 64; break; + case 115200: divisor = 32; break; + default: hang (); break; + } + + /* init serial UART0 */ + PUT8(U0LCR, 0); + PUT8(U0IER, 0); + PUT8(U0LCR, 0x80); /* DLAB=1 */ + PUT8(U0DLL, (unsigned char)(divisor & 0x00FF)); + PUT8(U0DLM, (unsigned char)(divisor >> 8)); + PUT8(U0LCR, 0x03); /* 8N1, DLAB=0 */ + PUT8(U0FCR, 1); /* Enable RX and TX FIFOs */ +} + +int serial_init (void) +{ + unsigned long pinsel0; + + serial_setbrg (); + + pinsel0 = GET32(PINSEL0); + pinsel0 &= ~(0x00000003); + pinsel0 |= 5; + PUT32(PINSEL0, pinsel0); + + return (0); +} + +void serial_putc (const char c) +{ + if (c == '\n') + { + while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */ + PUT8(U0THR, '\r'); + } + + while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */ + PUT8(U0THR, c); +} + +int serial_getc (void) +{ + while((GET8(U0LSR) & 1) == 0); + return GET8(U0RBR); +} + +void +serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } +} + +/* Test if there is a byte to read */ +int serial_tstc (void) +{ + return (GET8(U0LSR) & 1); +} + +#endif diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S index e66d109..8423e4f 100644 --- a/cpu/arm720t/start.S +++ b/cpu/arm720t/start.S @@ -43,7 +43,11 @@ _start: b reset ldr pc, _software_interrupt ldr pc, _prefetch_abort ldr pc, _data_abort +#ifdef CONFIG_LPC2292 + .word 0xB4405F76 /* 2's complement of the checksum of the vectors */ +#else ldr pc, _not_used +#endif ldr pc, _irq ldr pc, _fiq @@ -123,6 +127,10 @@ reset: bl cpu_init_crit #endif +#ifdef CONFIG_LPC2292 + bl lowlevel_init +#endif + #ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ @@ -131,6 +139,7 @@ relocate: /* relocate U-Boot to RAM */ beq stack_setup #if TEXT_BASE +#ifndef CONFIG_LPC2292 /* already done in lowlevel_init */ ldr r2, =0x0 /* Relocate the exception vectors */ cmp r1, r2 /* and associated data to address */ ldmneia r0!, {r3-r10} /* 0x0. Do nothing if TEXT_BASE is */ @@ -138,6 +147,7 @@ relocate: /* relocate U-Boot to RAM */ ldmneia r0, {r3-r9} stmneia r2, {r3-r9} adrne r0, _start /* restore r0 */ +#endif /* !CONFIG_LPC2292 */ #endif ldr r2, _armboot_start @@ -206,6 +216,14 @@ SYSCON3: .word 0x80002200 #define CLKCTL_49 0x4 /* 49.152 MHz */ #define CLKCTL_73 0x6 /* 73.728 MHz */ +#elif defined(CONFIG_LPC2292) +PLLCFG_ADR: .word PLLCFG +PLLFEED_ADR: .word PLLFEED +PLLCON_ADR: .word PLLCON +PLLSTAT_ADR: .word PLLSTAT +VPBDIV_ADR: .word VPBDIV +MEMMAP_ADR: .word MEMMAP + #endif cpu_init_crit: @@ -306,6 +324,50 @@ cpu_init_crit: #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* No specific initialisation for IntegratorAP/CM720T as yet */ +#elif defined(CONFIG_LPC2292) + /* Set-up PLL */ + mov r3, #0xAA + mov r4, #0x55 + /* First disconnect and disable the PLL */ + ldr r0, PLLCON_ADR + mov r1, #0x00 + str r1, [r0] + ldr r0, PLLFEED_ADR /* start feed sequence */ + str r3, [r0] + str r4, [r0] /* feed sequence done */ + /* Set new M and P values */ + ldr r0, PLLCFG_ADR + mov r1, #0x23 /* M=4 and P=2 */ + str r1, [r0] + ldr r0, PLLFEED_ADR /* start feed sequence */ + str r3, [r0] + str r4, [r0] /* feed sequence done */ + /* Then enable the PLL */ + ldr r0, PLLCON_ADR + mov r1, #0x01 /* PLL enable bit */ + str r1, [r0] + ldr r0, PLLFEED_ADR /* start feed sequence */ + str r3, [r0] + str r4, [r0] /* feed sequence done */ + /* Wait for the lock */ + ldr r0, PLLSTAT_ADR + mov r1, #0x400 /* lock bit */ +lock_loop: + ldr r2, [r0] + and r2, r1, r2 + cmp r2, #0 + beq lock_loop + /* And finally connect the PLL */ + ldr r0, PLLCON_ADR + mov r1, #0x03 /* PLL enable bit and connect bit */ + str r1, [r0] + ldr r0, PLLFEED_ADR /* start feed sequence */ + str r3, [r0] + str r4, [r0] /* feed sequence done */ + /* Set-up VPBDIV register */ + ldr r0, VPBDIV_ADR + mov r1, #0x01 /* VPB clock is same as process clock */ + str r1, [r0] #else #error No cpu_init_crit() defined for current CPU type #endif @@ -321,6 +383,7 @@ cpu_init_crit: str r1, [r0] #endif +#ifndef CONFIG_LPC2292 mov ip, lr /* * before relocating, we have to setup RAM timing @@ -329,6 +392,7 @@ cpu_init_crit: */ bl lowlevel_init mov lr, ip +#endif mov pc, lr @@ -537,6 +601,11 @@ reset_cpu: * on external peripherals such as watchdog timers, etc. */ #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* No specific reset actions for IntegratorAP/CM720T as yet */ +#elif defined(CONFIG_LPC2292) + .align 5 +.globl reset_cpu +reset_cpu: + mov pc, r0 #else #error No reset_cpu() defined for current CPU type #endif diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 57a7e8d..7c96ad8 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -312,25 +312,29 @@ int checkcpu (void) #endif /* CONFIG_440GR */ #endif /* CONFIG_440 */ - case PVR_440EPX1_RA: +#ifdef CONFIG_440EPX + case PVR_440EPX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */ puts("EPx Rev. A"); strcpy(addstr, "Security/Kasumi support"); break; - case PVR_440EPX2_RA: + case PVR_440EPX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */ puts("EPx Rev. A"); strcpy(addstr, "No Security/Kasumi support"); break; +#endif /* CONFIG_440EPX */ - case PVR_440GRX1_RA: +#ifdef CONFIG_440GRX + case PVR_440GRX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */ puts("GRx Rev. A"); strcpy(addstr, "Security/Kasumi support"); break; - case PVR_440GRX2_RA: + case PVR_440GRX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */ puts("GRx Rev. A"); strcpy(addstr, "No Security/Kasumi support"); break; +#endif /* CONFIG_440GRX */ case PVR_440SP_6_RAB: puts("SP Rev. A/B"); diff --git a/include/asm-arm/arch-arm720t/hardware.h b/include/asm-arm/arch-arm720t/hardware.h index 3056ca7..1e9cd41 100644 --- a/include/asm-arm/arch-arm720t/hardware.h +++ b/include/asm-arm/arch-arm720t/hardware.h @@ -36,6 +36,8 @@ /* include armadillo specific hardware file if there was one */ #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* include IntegratorCP/CM720T specific hardware file if there was one */ +#elif defined(CONFIG_LPC2292) +#include <asm-arm/arch-arm720t/lpc2292_registers.h> #else #error No hardware file defined for this configuration #endif diff --git a/include/asm-arm/arch-arm720t/lpc2292_registers.h b/include/asm-arm/arch-arm720t/lpc2292_registers.h new file mode 100644 index 0000000..5715f3e --- /dev/null +++ b/include/asm-arm/arch-arm720t/lpc2292_registers.h @@ -0,0 +1,225 @@ +#ifndef __LPC2292_REGISTERS_H +#define __LPC2292_REGISTERS_H + +#include <config.h> + +/* Macros for reading/writing registers */ +#define PUT8(reg, value) (*(volatile unsigned char*)(reg) = (value)) +#define PUT16(reg, value) (*(volatile unsigned short*)(reg) = (value)) +#define PUT32(reg, value) (*(volatile unsigned int*)(reg) = (value)) +#define GET8(reg) (*(volatile unsigned char*)(reg)) +#define GET16(reg) (*(volatile unsigned short*)(reg)) +#define GET32(reg) (*(volatile unsigned int*)(reg)) + +/* External Memory Controller */ + +#define BCFG0 0xFFE00000 /* 32-bits */ +#define BCFG1 0xFFE00004 /* 32-bits */ +#define BCFG2 0xFFE00008 /* 32-bits */ +#define BCFG3 0xFFE0000c /* 32-bits */ + +/* System Control Block */ + +#define EXTINT 0xE01FC140 +#define EXTWAKE 0xE01FC144 +#define EXTMODE 0xE01FC148 +#define EXTPOLAR 0xE01FC14C +#define MEMMAP 0xE01FC040 +#define PLLCON 0xE01FC080 +#define PLLCFG 0xE01FC084 +#define PLLSTAT 0xE01FC088 +#define PLLFEED 0xE01FC08C +#define PCON 0xE01FC0C0 +#define PCONP 0xE01FC0C4 +#define VPBDIV 0xE01FC100 + +/* Memory Acceleration Module */ + +#define MAMCR 0xE01FC000 +#define MAMTIM 0xE01FC004 + +/* Vectored Interrupt Controller */ + +#define VICIRQStatus 0xFFFFF000 +#define VICFIQStatus 0xFFFFF004 +#define VICRawIntr 0xFFFFF008 +#define VICIntSelect 0xFFFFF00C +#define VICIntEnable 0xFFFFF010 +#define VICIntEnClr 0xFFFFF014 +#define VICSoftInt 0xFFFFF018 +#define VICSoftIntClear 0xFFFFF01C +#define VICProtection 0xFFFFF020 +#define VICVectAddr 0xFFFFF030 +#define VICDefVectAddr 0xFFFFF034 +#define VICVectAddr0 0xFFFFF100 +#define VICVectAddr1 0xFFFFF104 +#define VICVectAddr2 0xFFFFF108 +#define VICVectAddr3 0xFFFFF10C +#define VICVectAddr4 0xFFFFF110 +#define VICVectAddr5 0xFFFFF114 +#define VICVectAddr6 0xFFFFF118 +#define VICVectAddr7 0xFFFFF11C +#define VICVectAddr8 0xFFFFF120 +#define VICVectAddr9 0xFFFFF124 +#define VICVectAddr10 0xFFFFF128 +#define VICVectAddr11 0xFFFFF12C +#define VICVectAddr12 0xFFFFF130 +#define VICVectAddr13 0xFFFFF134 +#define VICVectAddr14 0xFFFFF138 +#define VICVectAddr15 0xFFFFF13C +#define VICVectCntl0 0xFFFFF200 +#define VICVectCntl1 0xFFFFF204 +#define VICVectCntl2 0xFFFFF208 +#define VICVectCntl3 0xFFFFF20C +#define VICVectCntl4 0xFFFFF210 +#define VICVectCntl5 0xFFFFF214 +#define VICVectCntl6 0xFFFFF218 +#define VICVectCntl7 0xFFFFF21C +#define VICVectCntl8 0xFFFFF220 +#define VICVectCntl9 0xFFFFF224 +#define VICVectCntl10 0xFFFFF228 +#define VICVectCntl11 0xFFFFF22C +#define VICVectCntl12 0xFFFFF230 +#define VICVectCntl13 0xFFFFF234 +#define VICVectCntl14 0xFFFFF238 +#define VICVectCntl15 0xFFFFF23C + +/* Pin connect block */ + +#define PINSEL0 0xE002C000 /* 32 bits */ +#define PINSEL1 0xE002C004 /* 32 bits */ +#define PINSEL2 0xE002C014 /* 32 bits */ + +/* GPIO */ + +#define IO0PIN 0xE0028000 +#define IO0SET 0xE0028004 +#define IO0DIR 0xE0028008 +#define IO0CLR 0xE002800C +#define IO1PIN 0xE0028010 +#define IO1SET 0xE0028014 +#define IO1DIR 0xE0028018 +#define IO1CLR 0xE002801C +#define IO2PIN 0xE0028020 +#define IO2SET 0xE0028024 +#define IO2DIR 0xE0028028 +#define IO2CLR 0xE002802C +#define IO3PIN 0xE0028030 +#define IO3SET 0xE0028034 +#define IO3DIR 0xE0028038 +#define IO3CLR 0xE002803C + +/* Uarts */ + +#define U0RBR 0xE000C000 +#define U0THR 0xE000C000 +#define U0IER 0xE000C004 +#define U0IIR 0xE000C008 +#define U0FCR 0xE000C008 +#define U0LCR 0xE000C00C +#define U0LSR 0xE000C014 +#define U0SCR 0xE000C01C +#define U0DLL 0xE000C000 +#define U0DLM 0xE000C004 + +#define U1RBR 0xE0010000 +#define U1THR 0xE0010000 +#define U1IER 0xE0010004 +#define U1IIR 0xE0010008 +#define U1FCR 0xE0010008 +#define U1LCR 0xE001000C +#define U1MCR 0xE0010010 +#define U1LSR 0xE0010014 +#define U1MSR 0xE0010018 +#define U1SCR 0xE001001C +#define U1DLL 0xE0010000 +#define U1DLM 0xE0010004 + +/* I2C */ + +#define I2CONSET 0xE001C000 +#define I2STAT 0xE001C004 +#define I2DAT 0xE001C008 +#define I2ADR 0xE001C00C +#define I2SCLH 0xE001C010 +#define I2SCLL 0xE001C014 +#define I2CONCLR 0xE001C018 + +/* SPI */ + +#define S0SPCR 0xE0020000 +#define S0SPSR 0xE0020004 +#define S0SPDR 0xE0020008 +#define S0SPCCR 0xE002000C +#define S0SPINT 0xE002001C + +#define S1SPCR 0xE0030000 +#define S1SPSR 0xE0030004 +#define S1SPDR 0xE0030008 +#define S1SPCCR 0xE003000C +#define S1SPINT 0xE003001C + +/* CAN controller */ + +/* skip for now */ + +/* Timers */ + +#define T0IR 0xE0004000 +#define T0TCR 0xE0004004 +#define T0TC 0xE0004008 +#define T0PR 0xE000400C +#define T0PC 0xE0004010 +#define T0MCR 0xE0004014 +#define T0MR0 0xE0004018 +#define T0MR1 0xE000401C +#define T0MR2 0xE0004020 +#define T0MR3 0xE0004024 +#define T0CCR 0xE0004028 +#define T0CR0 0xE000402C +#define T0CR1 0xE0004030 +#define T0CR2 0xE0004034 +#define T0CR3 0xE0004038 +#define T0EMR 0xE000403C + +#define T1IR 0xE0008000 +#define T1TCR 0xE0008004 +#define T1TC 0xE0008008 +#define T1PR 0xE000800C +#define T1PC 0xE0008010 +#define T1MCR 0xE0008014 +#define T1MR0 0xE0008018 +#define T1MR1 0xE000801C +#define T1MR2 0xE0008020 +#define T1MR3 0xE0008024 +#define T1CCR 0xE0008028 +#define T1CR0 0xE000802C +#define T1CR1 0xE0008030 +#define T1CR2 0xE0008034 +#define T1CR3 0xE0008038 +#define T1EMR 0xE000803C + +/* PWM */ + +/* skip for now */ + +/* A/D converter */ + +/* skip for now */ + +/* Real Time Clock */ + +/* skip for now */ + +/* Watchdog */ + +#define WDMOD 0xE0000000 +#define WDTC 0xE0000004 +#define WDFEED 0xE0000008 +#define WDTV 0xE000000C + +/* EmbeddedICE LOGIC */ + +/* skip for now */ + +#endif diff --git a/include/asm-arm/arch-arm720t/mmc.h b/include/asm-arm/arch-arm720t/mmc.h new file mode 100644 index 0000000..e664a5f --- /dev/null +++ b/include/asm-arm/arch-arm720t/mmc.h @@ -0,0 +1,22 @@ +/* + * A dummy header file for use with the LPC2292 port to keep the + * compiler happy. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _MMC_ARM_TDM_H_ +#define _MMC_ARM_TDM_H_ +#endif /* _MMC_ARM_TDM_H_ */ diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index f102600..ad9fd49 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -740,8 +740,8 @@ #define PVR_440GR_RB 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */ #define PVR_440EPX1_RA 0x216218D0 /* 440EPX rev A with Security / Kasumi */ #define PVR_440EPX2_RA 0x216218D4 /* 440EPX rev A without Security / Kasumi */ -#define PVR_440GRX1_RA 0x216218D8 /* 440GRX rev A with Security / Kasumi */ -#define PVR_440GRX2_RA 0x216218DC /* 440GRX rev A without Security / Kasumi */ +#define PVR_440GRX1_RA 0x216218D0 /* 440GRX rev A with Security / Kasumi */ +#define PVR_440GRX2_RA 0x216218D4 /* 440GRX rev A without Security / Kasumi */ #define PVR_440GX_RA 0x51B21850 #define PVR_440GX_RB 0x51B21851 #define PVR_440GX_RC 0x51B21892 diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 49027da..67f62d3 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -135,7 +135,7 @@ #define CFG_EEPROM_PAGE_WRITE_ENABLE #define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo Type \"run kernelx\" to boot the system;" \ "echo" #undef CONFIG_BOOTARGS @@ -144,7 +144,7 @@ "netdev=eth3\0" \ "hostname=alpr\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ + "nfsroot=${serverip}:${rootpath} ${init}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ @@ -170,7 +170,6 @@ "ethact=ppc_4xx_eth3\0" \ "autoload=no\0" \ "ipconfig=dhcp;setenv serverip 11.0.0.152\0" \ - "actkernel=kernel2\0" \ "load_fpga=fpga load 0 ffe00000 10dd9a\0" \ "mtdargs=setenv bootargs root=/dev/mtdblock6 rw " \ "rootfstype=jffs2 init=/sbin/init\0" \ @@ -178,8 +177,10 @@ ";bootm 200000\0" \ "kernel2_mtd=nand read 200000 200000 200000;run mtdargs addip " \ "addtty;bootm 200000\0" \ - "kernel1=run ipconfig load_fpga kernel1_mtd\0" \ - "kernel2=run ipconfig load_fpga kernel2_mtd\0" \ + "kernel1=setenv actkernel 'kernel1';run load_fpga " \ + "kernel1_mtd\0" \ + "kernel2=setenv actkernel 'kernel2';run load_fpga " \ + "kernel2_mtd\0" \ "" #define CONFIG_BOOTCOMMAND "run kernel2" @@ -244,6 +245,7 @@ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_ALT_MEMTEST 1 /* Enable more extensive memtest*/ #define CFG_MEMTEST_START 0x0400000 /* memtest works on */ #define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h new file mode 100644 index 0000000..7e51523 --- /dev/null +++ b/include/configs/lpc2292sodimm.h @@ -0,0 +1,158 @@ +/* + * (C) Copyright 2000 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * Configuation settings for the EP7312 board. + * + * Modified to work on Armadillo HT1070 ARM720T board + * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#undef CONFIG_INIT_CRITICAL /* undef for developing */ + +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ +#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ +#define CONFIG_LPC2292 +#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ + +#undef CONFIG_USE_IRQ /* don't need them anymore */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* we use Serial line 1 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_DHCP | \ + CFG_CMD_FAT | \ + CFG_CMD_MMC | \ + CFG_CMD_NET | \ + CFG_CMD_PING) + +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 5 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "LPC2292SODIMM # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x40000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x40000000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/ + +#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ +#define CFG_HZ 2048 /* decrementer freq in Hz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x81000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB SDRAM */ + +#define PHYS_FLASH_1 0x80000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x00200000 /* 2 MB */ + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 1024 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (0x0 + 0x3C000) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_MMC 1 + +#endif /* __CONFIG_H */ diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h new file mode 100644 index 0000000..ccb0293 --- /dev/null +++ b/include/configs/mecp5200.h @@ -0,0 +1,345 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +/************************************************************************* + * (c) 2005 esd gmbh Hannover + * + * + * from IceCube.h file + * by Reinhard Arlt reinhard.arlt@esd-electronics.com + * + *************************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5200 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_ICECUBE 1 /* ... on IceCube board */ +#define CONFIG_MECP5200 1 /* ... on MECP5200 board */ +#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#if 0 /* test-only */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#else +#define CONFIG_BAUDRATE 9600 /* ... at 115200 bps */ +#endif +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + + +#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ + +#define CONFIG_MII +#if 0 /* test-only !!! */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_EEPRO100 1 +#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CONFIG_NS8382X 1 +#endif + +#else /* MPC5100 */ + +#endif + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + +/* USB */ +#if 0 +#define CONFIG_USB_OHCI +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define CONFIG_USB_STORAGE +#else +#define ADD_USB_CMD 0 +#endif + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_EEPROM | \ + CFG_CMD_FAT | \ + CFG_CMD_EXT2 | \ + CFG_CMD_I2C | \ + CFG_CMD_IDE | \ + CFG_CMD_BSP | \ + CFG_CMD_ELF) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ +# define CFG_LOWBOOT 1 +# define CFG_LOWBOOT16 1 +#endif +#if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */ +# define CFG_LOWBOOT 1 +# define CFG_LOWBOOT08 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Welcome to CBX-CPU5200 (mecp5200);" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \ + "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \ + "net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \ + "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \ + "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \ + "loadaddr=01000000\0" \ + "serverip=192.168.2.99\0" \ + "gatewayip=10.0.0.79\0" \ + "user=mu\0" \ + "target=mecp5200.esd\0" \ + "script=mecp5200.bat\0" \ + "image=/tftpboot/vxWorks_mecp5200\0" \ + "ipaddr=10.0.13.196\0" \ + "netmask=255.255.0.0\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_vxworks0" + +#if defined(CONFIG_MPC5200) +/* + * IPB Bus clocking configuration. + */ +#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#endif +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ + +#define CFG_I2C_SPEED 86000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +#define CFG_I2C_MULTI_EEPROMS 1 +/* + * Flash configuration + */ +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_FLASH_SIZE 0x00400000 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x003E0000) +#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CFG_MAX_FLASH_SECT 512 + +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +/* + * Environment settings + */ +#if 1 /* test-only */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_OVERWRITE 1 +#else +#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#define CFG_ENV_OFFSET 0x0000 /* environment starts at the beginning of the EEPROM */ +#define CFG_ENV_SIZE 0x0400 /* 8192 bytes may be used for env vars*/ + /* total size of a CAT24WC32 is 8192 bytes */ +#define CONFIG_ENV_OVERWRITE 1 +#endif + +#define CFG_FLASH_CFI_DRIVER 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ +#if 0 +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#endif +#define CFG_FLASH_INCREMENT 0x00400000 /* size of flash bank */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */ + + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +/* + * Define CONFIG_FEC_10MBIT to force FEC at 10Mb + */ +/* #define CONFIG_FEC_10MBIT 1 */ +#define CONFIG_PHY_ADDR 0x00 +#define CONFIG_UDP_CHECKSUM 1 + + +/* + * GPIO configuration + */ +#define CFG_GPS_PORT_CONFIG 0x01052444 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE +#else +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL 0 +#endif + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00085d00 + +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +#define CFG_CS1_START 0xfd000000 +#define CFG_CS1_SIZE 0x00010000 +#define CFG_CS1_CFG 0x10101410 + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333333 + +#define CFG_RESET_ADDRESS 0xff000000 + +/*----------------------------------------------------------------------- + * USB stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + +#endif /* __CONFIG_H */ diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 2cc137c..06c6652 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * Configuation settings for the PDNB3 board. @@ -237,18 +237,19 @@ #define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) #if defined(CONFIG_SCPU) -#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +/* no redundant environment on SCPU */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ #else -#define CFG_ENV_SECT_SIZE 0x1000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x1000 /* size of one complete sector */ #define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ -#endif -#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) /* Address and size of Redundant Environment Sector */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif #if !defined(CONFIG_SCPU) /* diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index e7f0108..098aa3f 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2006 @@ -23,7 +23,7 @@ */ /************************************************************************ - * sequoia.h - configuration for Sequoia board (PowerPC440EPx) + * sequoia.h - configuration for Sequoia & Rainier boards ***********************************************************************/ #ifndef __CONFIG_H #define __CONFIG_H @@ -31,7 +31,7 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */ +/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */ #ifndef CONFIG_RAINIER #define CONFIG_SEQUOIA 1 /* Board is Sequoia */ #define CONFIG_440EPX 1 /* Specific PPC440EPx */ @@ -39,7 +39,7 @@ #define CONFIG_440GRX 1 /* Specific PPC440GRx */ #endif #define CONFIG_4xx 1 /* ... PPC4xx family */ -#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define CONFIG_SYS_CLK_FREQ 33000000 /* external freq to pll */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ @@ -222,9 +222,21 @@ #undef CONFIG_BOOTARGS +/* Setup some board specific values for the default environment variables */ +#ifndef CONFIG_RAINIER +#define CONFIG_HOSTNAME sequoia +#define CFG_BOOTFILE "bootfile=/tftpboot/sequoia/uImage\0" +#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0" +#else +#define CONFIG_HOSTNAME rainier +#define CFG_BOOTFILE "bootfile=/tftpboot/rainier/uImage\0" +#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ + CFG_BOOTFILE \ + CFG_ROOTPATH \ "netdev=eth0\0" \ - "hostname=sequoia\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -238,13 +250,11 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ - "rootpath=/opt/eldk/ppc_4xxFP\0" \ - "bootfile=/tftpboot/sequoia/uImage\0" \ "kernel_addr=FC000000\0" \ "ramdisk_addr=FC180000\0" \ - "load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0" \ + "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \ "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ - "cp.b 100000 FFFA0000 60000\0" \ + "cp.b 200000 FFFA0000 60000\0" \ "upd=run load;run update\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -349,7 +359,7 @@ *----------------------------------------------------------------------*/ /* General PCI */ #define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h deleted file mode 100644 index 911a52d..0000000 --- a/include/configs/yellowstone.h +++ /dev/null @@ -1,340 +0,0 @@ -/* - * (C) Copyright 2005-2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/************************************************************************ - * yellowstone.h - configuration for YELLOWSTONE board - ***********************************************************************/ -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_YOLLOWSTONE 1 /* Board is Yellowstone */ -#define CONFIG_440GR 1 /* Specific PPC440EP support */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ -#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ -#define CONFIG_BOARD_RESET 1 /* call board_reset() */ - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */ -#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ -#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) -#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ -#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/ -#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 -#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 -#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 - -/*Don't change either of these*/ -#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals*/ -#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs*/ -/*Don't change either of these*/ - -#define CFG_USB_DEVICE 0x50000000 -#define CFG_NVRAM_BASE_ADDR 0x80000000 -#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000) -#define CFG_BOOT_BASE_ADDR 0xf0000000 - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in SDRAM) - *----------------------------------------------------------------------*/ -#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ -#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ -#define CFG_INIT_RAM_END (8 << 10) -#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */ -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SERIAL_MULTI 1 -/*define this if you want console on UART1*/ -#undef CONFIG_UART1_CONSOLE - -#define CFG_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -/* - * Define here the location of the environment variables (FLASH or EEPROM). - * Note: DENX encourages to use redundant environment in FLASH. - */ -#if 1 -#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#else -#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#endif - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */ - -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ - -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - -#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) -#endif /* CFG_ENV_IS_IN_FLASH */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */ -#define CFG_KBYTES_SDRAM (128 * 1024) /* 128MB */ -#define CFG_SDRAM_BANKS (2) - - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F - -#define CFG_I2C_MULTI_EEPROMS -#define CFG_I2C_EEPROM_ADDR (0xa8>>1) -#define CFG_I2C_EEPROM_ADDR_LEN 1 -#define CFG_EEPROM_PAGE_WRITE_ENABLE -#define CFG_EEPROM_PAGE_WRITE_BITS 3 -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#ifdef CFG_ENV_IS_IN_EEPROM -#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */ -#define CFG_ENV_OFFSET 0x0 -#endif /* CFG_ENV_IS_IN_EEPROM */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "hostname=yellowstone\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ - "bootm\0" \ - "rootpath=/opt/eldk/ppc_4xx\0" \ - "bootfile=/tftpboot/yellowstone/uImage\0" \ - "kernel_addr=fc000000\0" \ - "ramdisk_addr=fc180000\0" \ - "load=tftp 100000 /tftpboot/yellowstone/u-boot.bin\0" \ - "update=protect off fff80000 ffffffff;era fff80000 ffffffff;" \ - "cp.b 100000 fff80000 80000;" \ - "setenv filesize;saveenv\0" \ - "upd=run load;run update\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_self" - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_NET_MULTI 1 /* required for netconsole */ -#define CONFIG_PHY1_ADDR 3 -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ -#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ - -#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ - -#define CONFIG_NETCONSOLE /* include NetConsole support */ - -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION - -#ifdef CONFIG_440EP -/* USB */ -#define CONFIG_USB_OHCI -#define CONFIG_USB_STORAGE - -/*Comment this out to enable USB 1.1 device*/ -#define USB_2_0_DEVICE -#endif /*CONFIG_440EP*/ - -#ifdef DEBUG -#define CONFIG_PANIC_HANG -#else -#define CONFIG_HW_WATCHDOG /* watchdog */ -#endif - -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CFG_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_LYNXKDI 1 /* support kdi files */ - -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ - -/* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ -#define CFG_PCI_TARGET_INIT -#define CFG_PCI_MASTER_INIT - -#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - *----------------------------------------------------------------------*/ -#define CFG_FLASH CFG_FLASH_BASE -#define CFG_CPLD 0x80000000 - -/* Memory Bank 0 (NOR-FLASH) initialization */ -#define CFG_EBC_PB0AP 0x03017300 -#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000) - -/* Memory Bank 2 (CPLD) initialization */ -#define CFG_EBC_PB2AP 0x04814500 -#define CFG_EBC_PB2CR (CFG_CPLD | 0x18000) - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ -#define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 2cc18db..818462e 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005-2006 + * (C) Copyright 2005-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -22,7 +22,7 @@ */ /************************************************************************ - * yosemite.h - configuration for YOSEMITE board + * yosemite.h - configuration for Yosemite & Yellowstone boards ***********************************************************************/ #ifndef __CONFIG_H #define __CONFIG_H @@ -30,9 +30,16 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -#define CONFIG_YOSEMITE 1 /* Board is Yosemite */ -#define CONFIG_440EP 1 /* Specific PPC440EP support */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ +/* This config file is used for Yosemite (440EP) and Yellowstone (440GR)*/ +#ifndef CONFIG_YELLOWSTONE +#define CONFIG_YOSEMITE 1 /* Board is Yosemite */ +#define CONFIG_440EP 1 /* Specific PPC440EP support */ +#define CONFIG_HOSTNAME yosemite +#else +#define CONFIG_440GR 1 /* Specific PPC440GR support */ +#define CONFIG_HOSTNAME yellowstone +#endif +#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ @@ -159,9 +166,21 @@ #undef CONFIG_BOOTARGS +/* Setup some board specific values for the default environment variables */ +#ifndef CONFIG_YELLOWSTONE +#define CONFIG_HOSTNAME yosemite +#define CFG_BOOTFILE "bootfile=/tftpboot/yosemite/uImage\0" +#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0" +#else +#define CONFIG_HOSTNAME yellowstone +#define CFG_BOOTFILE "bootfile=/tftpboot/yellowstone/uImage\0" +#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ + CFG_BOOTFILE \ + CFG_ROOTPATH \ "netdev=eth0\0" \ - "hostname=yosemite\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -175,13 +194,12 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ - "rootpath=/opt/eldk/ppc_4xx\0" \ - "bootfile=/tftpboot/yosemite/uImage\0" \ + "bootfile=/tftpboot/${hostname}/uImage\0" \ "kernel_addr=fc000000\0" \ "ramdisk_addr=fc180000\0" \ - "load=tftp 100000 /tftpboot/yosemite/u-boot.bin\0" \ + "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \ "update=protect off fff80000 ffffffff;era fff80000 ffffffff;" \ - "cp.b 100000 fff80000 80000;" \ + "cp.b 200000 fff80000 80000;" \ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ "" @@ -218,9 +236,15 @@ #define CONFIG_USB_OHCI #define CONFIG_USB_STORAGE -/*Comment this out to enable USB 1.1 device*/ +/* Comment this out to enable USB 1.1 device */ #define USB_2_0_DEVICE -#endif /*CONFIG_440EP*/ + +#define CMD_USB (CFG_CMD_USB | CFG_CMD_FAT | CFG_CMD_EXT2) + +#define CONFIG_SUPPORT_VFAT +#else +#define CMD_USB 0 /* no USB on 440GR */ +#endif /* CONFIG_440EP */ #ifdef DEBUG #define CONFIG_PANIC_HANG @@ -243,11 +267,7 @@ CFG_CMD_PING | \ CFG_CMD_REGINFO | \ CFG_CMD_SDRAM | \ - CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ - CFG_CMD_USB ) - -#define CONFIG_SUPPORT_VFAT + CMD_USB) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> diff --git a/include/flash.h b/include/flash.h index 8b7e824..55b6d8f 100644 --- a/include/flash.h +++ b/include/flash.h @@ -304,6 +304,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define TOSH_ID_FVT160 0xC2 /* TC58FVT160 ID (16 M, top ) */ #define TOSH_ID_FVB160 0x43 /* TC58FVT160 ID (16 M, bottom ) */ +#define PHILIPS_LPC2292 0x0401FF13 /* LPC2292 internal FLASH */ /*----------------------------------------------------------------------- * Internal FLASH identification codes |