summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--CHANGELOG283
-rw-r--r--MAINTAINERS10
-rwxr-xr-xMAKEALL2
-rw-r--r--Makefile9
-rw-r--r--README8
-rw-r--r--arch/arm/cpu/arm1136/cpu.c1
-rw-r--r--arch/arm/cpu/arm1136/start.S4
-rw-r--r--board/ronetix/pm9g45/Makefile54
-rw-r--r--board/ronetix/pm9g45/config.mk1
-rw-r--r--board/ronetix/pm9g45/pm9g45.c188
-rw-r--r--board/samsung/goni/Makefile54
-rw-r--r--board/samsung/goni/config.mk34
-rw-r--r--board/samsung/goni/goni.c55
-rw-r--r--board/samsung/goni/lowlevel_init.S585
-rw-r--r--board/samsung/goni/mem_setup.S265
-rw-r--r--board/samsung/goni/onenand.c36
-rw-r--r--drivers/gpio/s5p_gpio.c2
-rw-r--r--include/configs/MPC8313ERDB.h2
-rw-r--r--include/configs/SIMPC8313.h2
-rw-r--r--include/configs/pm9g45.h186
-rw-r--r--include/configs/s5p_goni.h217
-rw-r--r--include/mpc83xx.h5
22 files changed, 1988 insertions, 15 deletions
diff --git a/CHANGELOG b/CHANGELOG
index c67da40..91664a0 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,286 @@
+commit f986325dd569faeaec4186f678d113505c5c4828
+Author: Ron Madrid <ron_madrid@sbcglobal.net>
+Date: Tue Jun 1 17:00:49 2010 -0700
+
+ Update SICRL_USBDR to reflect 4 different settings
+
+ This patch changed the SICRL_USBDR define to reflect the 4 different bit
+ settings for this two-bit field. The four different options are '00', '01',
+ '10', and '11'. This patch also corrects the config file for SIMPC8313 and
+ MPC8313ERDB for the appropriate fields. This change only affects the MPC8313
+ cpu.
+
+ Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3057c6be5efda781a72ca04432e0a4ed6e670030
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Apr 23 12:20:11 2010 -0500
+
+ fdt_support: add entry for sec3.1 and fix sec3.3
+
+ Add sec3.1 h/w geometry for fdt node fixups.
+
+ Also, technically, whilst SEC v3.3 h/w honours the tls_ssl_stream descriptor
+ type, it lacks the ARC4 algorithm execution unit required to be able
+ to execute anything meaningful with it. Change the node to agree with
+ the documentation that declares that the sec3.3 really doesn't have such
+ a descriptor type.
+
+ Reported-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5f4d36825a028e300b7d56a566d2cf84418b7a68
+Author: Timur Tabi <timur@freescale.com>
+Date: Thu May 20 11:16:16 2010 -0500
+
+ fsl: rename 'dma' to 'brdcfg1' in the ngPIXIS structure
+
+ The ngPIXIS is a board-specific FPGA, but the definition of the registers
+ is mostly consistent. On boards where it matter, register 9 is called
+ 'brdcfg1' instead of 'dma', so rename the variable in the ngpixis_t
+ definition.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6e37a044076896ba88b0d6316fadd492032c5193
+Author: Timur Tabi <timur@freescale.com>
+Date: Thu May 20 12:45:39 2010 -0500
+
+ fsl/85xx: add clkdvdr and pmuxcr2 to global utilities structure definition
+
+ Add the 'clkdvdr' and 'pmuxcr2' registers to the 85xx definition of
+ struct ccsr_gur.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 39c209546ab5b11ca6410c5cc57dcbf457e50800
+Author: Tom <Tom@bumblecow.com>
+Date: Fri May 28 13:23:16 2010 -0500
+
+ ARM Update mach-types
+
+ Fetched from http://www.arm.linux.org.uk/developer/machines/download.php
+ And built with
+
+ repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
+ commit 3defb2476166445982a90c12d33f8947e75476c4
+
+ Signed-off-by: Tom <Tom@bumblecow.com>
+
+commit 551bd947bd6f982fa38dde840576eba52346160c
+Author: Tom <Tom@bumblecow.com>
+Date: Sun May 9 16:58:11 2010 -0500
+
+ ARM Update mach-types
+
+ Fetched from http://www.arm.linux.org.uk/developer/machines/download.php
+ And built with
+
+ repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
+ commit 257dab81413b31b8648becfe11586b3a41e5c29a
+
+ Signed-off-by: Tom <Tom@bumblecow.com>
+
+commit 1117cbf2adac59050af1751af6c6a524afa5c3ef
+Author: Thomas Chou <thomas@wytron.com.tw>
+Date: Fri May 28 10:56:50 2010 +0800
+
+ nios: remove nios-32 arch
+
+ The nios-32 arch is obsolete and broken. So it is removed.
+
+ Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
+
+commit 6803336c9f21ba428f5c1b1cf825bbbac0a762e5
+Author: Thomas Chou <thomas@wytron.com.tw>
+Date: Fri May 21 11:08:02 2010 +0800
+
+ nios2: allow STANDALONE_LOAD_ADDR overriding
+
+ This patch allows users to override default STANDALONE_LOAD_ADDR.
+ The gcclibdir path was duplicated in the standalone Makefile and
+ can be removed.
+
+ Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit 8d52ea6db484c689a75ef8a36a4e525753b8f078
+Author: Thomas Chou <thomas@wytron.com.tw>
+Date: Sat May 15 06:00:05 2010 +0800
+
+ nios2: fix div64 issue for gcc4
+
+ This patch fixes the run-time error on div64 when built with
+ gcc4, which was reported by jhwu0625 on nios forum. It merges
+ math support from libgcc of gcc4. This patch is copied from
+ nios2-linux.
+
+ It works with both gcc3 and gcc4. The old mult.c, divmod.c and
+ math.h are removed.
+
+ Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit 0df01fd3d71481b5cc7aeea6a741b9fc3be15178
+Author: Thomas Chou <thomas@wytron.com.tw>
+Date: Fri May 21 11:08:03 2010 +0800
+
+ nios2: fix r15 issue for gcc4
+
+ The "-ffixed-r15" option doesn't work well for gcc4. Since we
+ don't use gp for small data with option "-G0", we can use gp
+ as global data pointer. This allows compiler to use r15. It
+ is necessary for gcc4 to work properly.
+
+ Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit 661ba14051db6766932fcb50ba1ec7c67f230054
+Author: Thomas Chou <thomas@wytron.com.tw>
+Date: Fri Apr 30 11:34:16 2010 +0800
+
+ spi: add altera spi controller support
+
+ This patch adds the driver of altera spi controller, which is
+ used as epcs/spi flash controller. It also works with mmc_spi
+ driver.
+
+ This driver support more than one spi bus, with base list declared
+ #define CONFIG_SYS_ALTERA_SPI_LIST { BASE_0,BASE_1,... }
+
+ Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
+ Tested-by: Ian Abbott <abbotti@mev.co.uk>
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit 1e8e9bad2db38e93c3bc9f4b6238b3d8be99e469
+Author: Thomas Chou <thomas@wytron.com.tw>
+Date: Fri Apr 30 11:34:15 2010 +0800
+
+ nios2: add gpio support to nios2-generic board
+
+ This patch adds gpio support of Altera PIO component to the
+ nios2-generic board. Though it drives only gpio_led at the
+ moment, it supports bidirectional port to control bit-banging
+ I2C, NAND flash busy status or button switches, etc.
+
+ Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
+ Tested-by: Ian Abbott <abbotti@mev.co.uk>
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit 3e6b86b5552840bb4147871a753840eb3923374c
+Author: Thomas Chou <thomas@wytron.com.tw>
+Date: Fri Apr 30 11:34:14 2010 +0800
+
+ misc: add gpio based status led driver
+
+ This patch adds a status led driver followed the GPIO access
+ conventions of Linux. The led mask is used to specify the gpio pin.
+
+ Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
+ Tested-by: Ian Abbott <abbotti@mev.co.uk>
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit cedd341d551b6b705e97ab1953a87575b9ff9ef9
+Author: Thomas Chou <thomas@wytron.com.tw>
+Date: Fri Apr 30 11:34:13 2010 +0800
+
+ nios2: add gpio support
+
+ This patch adds driver for a trivial gpio core, which is described
+ in http://nioswiki.com/GPIO. It is used for gpio led and nand flash
+ interface in u-boot.
+
+ When CONFIG_SYS_GPIO_BASE is not defined, board may provide
+ its own driver.
+
+ Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
+ Tested-by: Ian Abbott <abbotti@mev.co.uk>
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit adf55679af1ed98c15a136eb81d6204ebe740b30
+Author: Wolfgang Wegner <w.wegner@astro-kom.de>
+Date: Tue Mar 30 19:19:51 2010 +0100
+
+ add CONFIG_SYS_FEC_FULL_MII for MCF5445x
+
+ This patch adds support for full MII interface on MCF5445x (in contrast
+ to RMII as used on the evaluation boards).
+
+ Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de>
+
+commit ae49099755affc942171a7727c1b12c51d167abf
+Author: Wolfgang Wegner <w.wegner@astro-kom.de>
+Date: Tue Mar 30 19:19:50 2010 +0100
+
+ add CONFIG_SYS_FEC_NO_SHARED_PHY for MCF5445x
+
+ This patch adds the possibility to handle seperate PHYs to MCF5445x.
+ Naming is chosen to resemble the contrary CONFIG_FEC_SHARED_PHY in the
+ linux kernel.
+
+ Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de>
+
+commit e9b43cae1a20af13d1baeb13038b3f34905c14b5
+Author: Wolfgang Wegner <w.wegner@astro-kom.de>
+Date: Tue Mar 30 19:20:31 2010 +0100
+
+ add missing PCS3 for MCF5445x
+
+ This patch adds the code for handling PCS3 (DSPI chip select 3) in
+ cpu_init.c and m5445x.h
+
+ Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de>
+
+commit d0fe1128c4451327b9cb0fac1a76efd194b078b5
+Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+Date: Wed May 26 21:26:43 2010 +0400
+
+ USB: fix create_pipe()
+
+ create_pipe() can give wrong result if an expression is passed as the 'endpoint'
+ argument -- due to missing parentheses.
+
+ Thanks to Martin Mueller for finding the bug and providing the patch.
+
+ Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+
+commit c941b77adc40f344215e367b3d1fc638addff870
+Author: Andrew Caldwell <Andrew.Caldwell@analog.com>
+Date: Fri May 7 15:10:07 2010 -0400
+
+ Blackfin: nand: drain the write buffer before returning
+
+ The current Blackfin nand write function fills up the write buffer but
+ returns before it has had a chance to drain. On faster systems, this
+ isn't a problem as the operation finishes before the ECC registers are
+ read, but on slower systems the ECC may be incomplete when the core tries
+ to read it.
+
+ So wait for the buffer to drain once we're done writing to it.
+
+ Signed-off-by: Andrew Caldwell <Andrew.Caldwell@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 01f03bda5b22e5aeae5f02fd537da97a41485c73
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 26 23:57:08 2010 +0200
+
+ Prepare v2010.06-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c4976807cbbabd281f45466ac5e47e5639bcc9cb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 26 23:51:22 2010 +0200
+
+ Coding style cleanup, update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit c7da8c19b5f7fd58b5b4b1d247648851af56e1f0
Author: Andreas Biessmann <andreas.devel@googlemail.com>
Date: Sat May 22 13:17:21 2010 +0200
diff --git a/MAINTAINERS b/MAINTAINERS
index ddd05cb..24f754c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -232,6 +232,7 @@ Ilko Iliev <iliev@ronetix.at>
PM9261 AT91SAM9261
PM9263 AT91SAM9263
+ PM9G45 ARM926EJS (AT91SAM9G45 SoC)
Gary Jennejohn <garyj@denx.de>
@@ -638,14 +639,15 @@ Simon Kagstrom <simon.kagstrom@netinsight.net>
openrd_base ARM926EJS (Kirkwood SoC)
-Minkyu Kang <mk7.kang@samsung.com>
-
- SMDKC100 ARM CORTEX-A8 (S5PC100 SoC)
-
Nishant Kamat <nskamat@ti.com>
omap1610h2 ARM926EJS
+Minkyu Kang <mk7.kang@samsung.com>
+
+ s5p_goni ARM CORTEX-A8 (S5PC110 SoC)
+ SMDKC100 ARM CORTEX-A8 (S5PC100 SoC)
+
Frederik Kriewitz <frederik@kriewitz.eu>
devkit8000 ARM CORTEX-A8 (OMAP3530 SoC)
diff --git a/MAKEALL b/MAKEALL
index 8807b08..170bcad 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -653,6 +653,7 @@ LIST_ARM_CORTEX_A8=" \
omap3_sdp3430 \
omap3_zoom1 \
omap3_zoom2 \
+ s5p_goni \
smdkc100 \
"
@@ -685,6 +686,7 @@ LIST_at91=" \
otc570 \
pm9261 \
pm9263 \
+ pm9g45 \
SBC35_A9G20 \
TNY_A9260 \
TNY_A9G20 \
diff --git a/Makefile b/Makefile
index 695f3bf..8d28460 100644
--- a/Makefile
+++ b/Makefile
@@ -24,7 +24,7 @@
VERSION = 2010
PATCHLEVEL = 06
SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
@@ -2873,6 +2873,10 @@ otc570_config : unconfig
pm9263_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
+pm9g45_config : unconfig
+ @mkdir -p $(obj)include
+ @$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
+
SBC35_A9G20_NANDFLASH_config \
SBC35_A9G20_EEPROM_config \
SBC35_A9G20_config : unconfig
@@ -3183,6 +3187,9 @@ omap3_zoom1_config : unconfig
omap3_zoom2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
+s5p_goni_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 goni samsung s5pc1xx
+
smdkc100_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
diff --git a/README b/README
index 68f1720..a9c98f2 100644
--- a/README
+++ b/README
@@ -143,9 +143,9 @@ Directory Hierarchy:
/cpu CPU specific files
/arm720t Files specific to ARM 720 CPUs
/arm920t Files specific to ARM 920 CPUs
- /at91rm9200 Files specific to Atmel AT91RM9200 CPU
- /imx Files specific to Freescale MC9328 i.MX CPUs
- /s3c24x0 Files specific to Samsung S3C24X0 CPUs
+ /at91rm9200 Files specific to Atmel AT91RM9200 CPU
+ /imx Files specific to Freescale MC9328 i.MX CPUs
+ /s3c24x0 Files specific to Samsung S3C24X0 CPUs
/arm925t Files specific to ARM 925 CPUs
/arm926ejs Files specific to ARM 926 CPUs
/arm1136 Files specific to ARM 1136 CPUs
@@ -2504,7 +2504,7 @@ to save the current settings.
I2C muxes, you can define here, how to reach this
EEPROM. For example:
- #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0"
+ #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0"
EEPROM which holds the environment, is reached over
a pca9547 i2c mux with address 0x70, channel 3.
diff --git a/arch/arm/cpu/arm1136/cpu.c b/arch/arm/cpu/arm1136/cpu.c
index ade7f46..2b91631 100644
--- a/arch/arm/cpu/arm1136/cpu.c
+++ b/arch/arm/cpu/arm1136/cpu.c
@@ -71,6 +71,7 @@ static void cache_flush(void)
{
unsigned long i = 0;
+ asm ("mcr p15, 0, %0, c7, c10, 0": :"r" (i)); /* clean entire data cache */
asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i)); /* invalidate both caches and flush btb */
asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (i)); /* mem barrier to sync things */
}
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index 957f438..922d01c 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -226,8 +226,8 @@ cpu_init_crit:
* flush v4 I/D caches
*/
mov r0, #0
- mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
- mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
+ mcr p15, 0, r0, c7, c7, 0 /* Invalidate I+D+BTB caches */
+ mcr p15, 0, r0, c8, c7, 0 /* Invalidate Unified TLB */
/*
* disable MMU stuff and caches
diff --git a/board/ronetix/pm9g45/Makefile b/board/ronetix/pm9g45/Makefile
new file mode 100644
index 0000000..dd5b02e
--- /dev/null
+++ b/board/ronetix/pm9g45/Makefile
@@ -0,0 +1,54 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += pm9g45.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ronetix/pm9g45/config.mk b/board/ronetix/pm9g45/config.mk
new file mode 100644
index 0000000..7fe9d03
--- /dev/null
+++ b/board/ronetix/pm9g45/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x73f00000
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
new file mode 100644
index 0000000..3b4d9a3
--- /dev/null
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -0,0 +1,188 @@
+/*
+ * (C) Copyright 2010
+ * Ilko Iliev <iliev@ronetix.at>
+ * Asen Dimov <dimov@ronetix.at>
+ * Ronetix GmbH <www.ronetix.at>
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91sam9g45.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_matrix.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void pm9g45_nand_hw_init(void)
+{
+ unsigned long csa;
+ at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE;
+ at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
+ /* Enable CS3 */
+ csa = readl(&matrix->ccr[6]) | AT91_MATRIX_CSA_EBI_CS3A;
+ writel(csa, &matrix->ccr[6]);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+
+ writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2),
+ &smc->cs[3].pulse);
+
+ writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4),
+ &smc->cs[3].cycle);
+
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_DBW_8 |
+ AT91_SMC_MODE_TDF_CYCLE(3),
+ &smc->cs[3].mode);
+
+ writel(1 << AT91SAM9G45_ID_PIOC, &pmc->pcer);
+
+#ifdef CONFIG_SYS_NAND_READY_PIN
+ /* Configure RDY/BSY */
+ at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+#endif
+
+ /* Enable NandFlash */
+ at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void pm9g45_macb_hw_init(void)
+{
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+
+ /*
+ * PD2 enables the 50MHz oscillator for Ethernet PHY
+ * 1 - enable
+ * 0 - disable
+ */
+ at91_set_pio_output(AT91_PIO_PORTD, 2, 1);
+ at91_set_pio_value(AT91_PIO_PORTD, 2, 1); /* 1- enable, 0 - disable */
+
+ /* Enable clock */
+ writel(1 << AT91SAM9G45_ID_EMAC, &pmc->pcer);
+
+ /*
+ * Disable pull-up on:
+ * RXDV (PA15) => PHY normal mode (not Test mode)
+ * ERX0 (PA12) => PHY ADDR0
+ * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
+ *
+ * PHY has internal pull-down
+ */
+ at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 12, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 13, 0);
+
+ /* Re-enable pull-up */
+ at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 12, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 13, 1);
+
+ at91_macb_hw_init();
+}
+#endif
+
+int board_init(void)
+{
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
+ /* Enable Ctrlc */
+ console_init_f();
+
+ writel((1 << AT91SAM9G45_ID_PIOA) |
+ (1 << AT91SAM9G45_ID_PIOB) |
+ (1 << AT91SAM9G45_ID_PIOC) |
+ (1 << AT91SAM9G45_ID_PIODE), &pmc->pcer);
+
+ /* arch number of AT91SAM9M10G45EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ pm9g45_nand_hw_init();
+#endif
+
+#ifdef CONFIG_MACB
+ pm9g45_macb_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+ /*
+ * Initialize ethernet HW addr prior to starting Linux,
+ * needed for nfsroot
+ */
+ eth_init(gd->bd);
+#endif
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01);
+#endif
+ return rc;
+}
diff --git a/board/samsung/goni/Makefile b/board/samsung/goni/Makefile
new file mode 100644
index 0000000..9b4c886
--- /dev/null
+++ b/board/samsung/goni/Makefile
@@ -0,0 +1,54 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y := goni.o onenand.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(SOBJS) $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/goni/config.mk b/board/samsung/goni/config.mk
new file mode 100644
index 0000000..0e9dd45
--- /dev/null
+++ b/board/samsung/goni/config.mk
@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2010 Samsung Electronics
+# Kyungmin Park <kyungmin.park@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# On S5PC100 we use the 128 MiB OneDRAM bank at
+#
+# 0x30000000 to 0x35000000 (80MiB)
+# 0x38000000 to 0x40000000 (128MiB)
+#
+# On S5PC110 we use the 128 MiB OneDRAM bank at
+#
+# 0x30000000 to 0x35000000 (80MiB)
+# 0x40000000 to 0x50000000 (256MiB)
+#
+TEXT_BASE = 0x34800000
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
new file mode 100644
index 0000000..e512c59
--- /dev/null
+++ b/board/samsung/goni/goni.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2008-2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ gd->bd->bi_arch_number = MACH_TYPE_GONI;
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+ gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+ gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
+
+ return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ puts("Board:\tGoni\n");
+ return 0;
+}
+#endif
diff --git a/board/samsung/goni/lowlevel_init.S b/board/samsung/goni/lowlevel_init.S
new file mode 100644
index 0000000..4b72992
--- /dev/null
+++ b/board/samsung/goni/lowlevel_init.S
@@ -0,0 +1,585 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/power.h>
+
+/*
+ * Register usages:
+ *
+ * r5 has zero always
+ * r7 has S5PC100 GPIO base, 0xE0300000
+ * r8 has real GPIO base, 0xE0300000, 0xE0200000 at S5PC100, S5PC110 repectively
+ * r9 has Mobile DDR size, 1 means 1GiB, 2 means 2GiB and so on
+ */
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+ .globl lowlevel_init
+lowlevel_init:
+ mov r11, lr
+
+ /* r5 has always zero */
+ mov r5, #0
+
+ ldr r7, =S5PC100_GPIO_BASE
+ ldr r8, =S5PC100_GPIO_BASE
+ /* Read CPU ID */
+ ldr r2, =S5PC1XX_PRO_ID
+ ldr r0, [r2]
+ mov r1, #0x00010000
+ and r0, r0, r1
+ cmp r0, r5
+ beq 100f
+ ldr r8, =S5PC110_GPIO_BASE
+100:
+ /* Turn on KEY_LED_ON [GPJ4(1)] XMSMWEN */
+ cmp r7, r8
+ beq skip_check_didle @ Support C110 only
+
+ ldr r0, =S5PC110_RST_STAT
+ ldr r1, [r0]
+ and r1, r1, #0x000D0000
+ cmp r1, #(0x1 << 19) @ DEEPIDLE_WAKEUP
+ beq didle_wakeup
+ cmp r7, r8
+
+skip_check_didle:
+ addeq r0, r8, #0x280 @ S5PC100_GPIO_J4
+ addne r0, r8, #0x2C0 @ S5PC110_GPIO_J4
+ ldr r1, [r0, #0x0] @ GPIO_CON_OFFSET
+ bic r1, r1, #(0xf << 4) @ 1 * 4-bit
+ orr r1, r1, #(0x1 << 4)
+ str r1, [r0, #0x0] @ GPIO_CON_OFFSET
+
+ ldr r1, [r0, #0x4] @ GPIO_DAT_OFFSET
+#ifdef CONFIG_ONENAND_IPL
+ orr r1, r1, #(1 << 1) @ 1 * 1-bit
+#else
+ bic r1, r1, #(1 << 1)
+#endif
+ str r1, [r0, #0x4] @ GPIO_DAT_OFFSET
+
+ /* Don't setup at s5pc100 */
+ beq 100f
+
+ /*
+ * Initialize Async Register Setting for EVT1
+ * Because we are setting EVT1 as the default value of EVT0,
+ * setting EVT0 as well does not make things worse.
+ * Thus, for the simplicity, we set for EVT0, too
+ *
+ * The "Async Registers" are:
+ * 0xE0F0_0000
+ * 0xE1F0_0000
+ * 0xF180_0000
+ * 0xF190_0000
+ * 0xF1A0_0000
+ * 0xF1B0_0000
+ * 0xF1C0_0000
+ * 0xF1D0_0000
+ * 0xF1E0_0000
+ * 0xF1F0_0000
+ * 0xFAF0_0000
+ */
+ ldr r0, =0xe0f00000
+ ldr r1, [r0]
+ bic r1, r1, #0x1
+ str r1, [r0]
+
+ ldr r0, =0xe1f00000
+ ldr r1, [r0]
+ bic r1, r1, #0x1
+ str r1, [r0]
+
+ ldr r0, =0xf1800000
+ ldr r1, [r0]
+ bic r1, r1, #0x1
+ str r1, [r0]
+
+ ldr r0, =0xf1900000
+ ldr r1, [r0]
+ bic r1, r1, #0x1
+ str r1, [r0]
+
+ ldr r0, =0xf1a00000
+ ldr r1, [r0]
+ bic r1, r1, #0x1
+ str r1, [r0]
+
+ ldr r0, =0xf1b00000
+ ldr r1, [r0]
+ bic r1, r1, #0x1
+ str r1, [r0]
+
+ ldr r0, =0xf1c00000
+ ldr r1, [r0]
+ bic r1, r1, #0x1
+ str r1, [r0]
+
+ ldr r0, =0xf1d00000
+ ldr r1, [r0]
+ bic r1, r1, #0x1
+ str r1, [r0]
+
+ ldr r0, =0xf1e00000
+ ldr r1, [r0]
+ bic r1, r1, #0x1
+ str r1, [r0]
+
+ ldr r0, =0xf1f00000
+ ldr r1, [r0]
+ bic r1, r1, #0x1
+ str r1, [r0]
+
+ ldr r0, =0xfaf00000
+ ldr r1, [r0]
+ bic r1, r1, #0x1
+ str r1, [r0]
+
+ /*
+ * Diable ABB block to reduce sleep current at low temperature
+ * Note that it's hidden register setup don't modify it
+ */
+ ldr r0, =0xE010C300
+ ldr r1, =0x00800000
+ str r1, [r0]
+
+100:
+ /* IO retension release */
+ ldreq r0, =S5PC100_OTHERS @ 0xE0108200
+ ldrne r0, =S5PC110_OTHERS @ 0xE010E000
+ ldr r1, [r0]
+ ldreq r2, =(1 << 31) @ IO_RET_REL
+ ldrne r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28))
+ orr r1, r1, r2
+ /* Do not release retention here for S5PC110 */
+ streq r1, [r0]
+
+#ifndef CONFIG_ONENAND_IPL
+ /* Disable Watchdog */
+ ldreq r0, =S5PC100_WATCHDOG_BASE @ 0xEA200000
+ ldrne r0, =S5PC110_WATCHDOG_BASE @ 0xE2700000
+ str r5, [r0]
+
+ /* setting SRAM */
+ ldreq r0, =S5PC100_SROMC_BASE
+ ldrne r0, =S5PC110_SROMC_BASE
+ ldr r1, =0x9
+ str r1, [r0]
+#endif
+
+ /* S5PC100 has 3 groups of interrupt sources */
+ ldreq r0, =S5PC100_VIC0_BASE @ 0xE4000000
+ ldrne r0, =S5PC110_VIC0_BASE @ 0xF2000000
+ add r1, r0, #0x00100000
+ add r2, r0, #0x00200000
+
+ /* Disable all interrupts (VIC0, VIC1 and VIC2) */
+ mvn r3, #0x0
+ str r3, [r0, #0x14] @ INTENCLEAR
+ str r3, [r1, #0x14] @ INTENCLEAR
+ str r3, [r2, #0x14] @ INTENCLEAR
+
+#ifndef CONFIG_ONENAND_IPL
+ /* Set all interrupts as IRQ */
+ str r5, [r0, #0xc] @ INTSELECT
+ str r5, [r1, #0xc] @ INTSELECT
+ str r5, [r2, #0xc] @ INTSELECT
+
+ /* Pending Interrupt Clear */
+ str r5, [r0, #0xf00] @ INTADDRESS
+ str r5, [r1, #0xf00] @ INTADDRESS
+ str r5, [r2, #0xf00] @ INTADDRESS
+#endif
+
+#ifndef CONFIG_ONENAND_IPL
+ /* for UART */
+ bl uart_asm_init
+
+ bl internal_ram_init
+#endif
+
+#ifdef CONFIG_ONENAND_IPL
+ /* init system clock */
+ bl system_clock_init
+
+ /* OneNAND Sync Read Support at S5PC110 only
+ * RM[15] : Sync Read
+ * BRWL[14:12] : 7 CLK
+ * BL[11:9] : Continuous
+ * VHF[3] : Very High Frequency Enable (Over 83MHz)
+ * HF[2] : High Frequency Enable (Over 66MHz)
+ * WM[1] : Sync Write
+ */
+ cmp r7, r8
+ ldrne r1, =0xE006
+ ldrne r0, =0xB001E442
+ strneh r1, [r0]
+
+ /*
+ * GCE[26] : Gated Clock Enable
+ * RPE[17] : Enables Read Prefetch
+ */
+ ldrne r1, =((1 << 26) | (1 << 17) | 0xE006)
+ ldrne r0, =0xB0600000
+ strne r1, [r0, #0x100] @ ONENAND_IF_CTRL
+ ldrne r1, =0x1212
+ strne r1, [r0, #0x108]
+
+ /* Board detection to set proper memory configuration */
+ cmp r7, r8
+ moveq r9, #1 /* r9 has 1Gib default at s5pc100 */
+ movne r9, #2 /* r9 has 2Gib default at s5pc110 */
+
+ ldr r2, =0xE0200200
+ ldr r4, [r2, #0x48]
+
+ bic r1, r4, #(0x3F << 4) /* PULLUP_DISABLE: 3 * 2-bit */
+ bic r1, r1, #(0x3 << 2) /* PULLUP_DISABLE: 2 * 2-bit */
+ bic r1, r1, #(0x3 << 14) /* PULLUP_DISABLE: 2 * 2-bit */
+ str r1, [r2, #0x48]
+ /* For write completion */
+ nop
+ nop
+
+ ldr r3, [r2, #0x44]
+ and r1, r3, #(0x7 << 2)
+ mov r1, r1, lsr #2
+ cmp r1, #0x5
+ moveq r9, #3
+ cmp r1, #0x6
+ moveq r9, #1
+ cmp r1, #0x7
+ moveq r9, #2
+ and r0, r3, #(0x1 << 1)
+ mov r0, r0, lsr #1
+ orr r1, r1, r0, lsl #3
+ cmp r1, #0x8
+ moveq r9, #3
+ and r1, r3, #(0x7 << 2)
+ mov r1, r1, lsr #2
+ and r0, r3, #(0x1 << 7)
+ mov r0, r0, lsr #7
+ orr r1, r1, r0, lsl #3
+ cmp r1, #0x9
+ moveq r9, #3
+ str r4, [r2, #0x48] /* Restore PULLUP configuration */
+
+ bl mem_ctrl_asm_init
+
+ /* Wakeup support. Don't know if it's going to be used, untested. */
+ ldreq r0, =S5PC100_RST_STAT
+ ldrne r0, =S5PC110_RST_STAT
+ ldr r1, [r0]
+ biceq r1, r1, #0xfffffff7
+ moveq r2, #(1 << 3)
+ bicne r1, r1, #0xfffeffff
+ movne r2, #(1 << 16)
+ cmp r1, r2
+ bne 1f
+wakeup:
+ /* turn off L2 cache */
+ bl l2_cache_disable
+
+ cmp r7, r8
+ ldreq r0, =0xC100
+ ldrne r0, =0xC110
+
+ /* invalidate L2 cache also */
+ bl invalidate_dcache
+
+ /* turn on L2 cache */
+ bl l2_cache_enable
+
+ cmp r7, r8
+ /* Load return address and jump to kernel */
+ ldreq r0, =S5PC100_INFORM0
+ ldrne r0, =S5PC110_INFORM0
+
+ /* r1 = physical address of s5pc1xx_cpu_resume function */
+ ldr r1, [r0]
+
+ /* Jump to kernel (sleep-s5pc1xx.S) */
+ mov pc, r1
+ nop
+ nop
+#else
+ cmp r7, r8
+ /* Clear wakeup status register */
+ ldreq r0, =S5PC100_WAKEUP_STAT
+ ldrne r0, =S5PC110_WAKEUP_STAT
+ ldr r1, [r0]
+ str r1, [r0]
+
+ /* IO retension release */
+ ldreq r0, =S5PC100_OTHERS @ 0xE0108200
+ ldrne r0, =S5PC110_OTHERS @ 0xE010E000
+ ldr r1, [r0]
+ ldreq r2, =(1 << 31) @ IO_RET_REL
+ ldrne r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28))
+ orr r1, r1, r2
+ str r1, [r0]
+
+#endif
+ b 1f
+
+didle_wakeup:
+ /* Wait when APLL is locked */
+ ldr r0, =0xE0100100 @ S5PC110_APLL_CON
+lockloop:
+ ldr r1, [r0]
+ and r1, r1, #(1 << 29)
+ cmp r1, #(1 << 29)
+ bne lockloop
+
+ ldr r0, =S5PC110_INFORM0
+ ldr r1, [r0]
+ mov pc, r1
+ nop
+ nop
+ nop
+ nop
+ nop
+
+1:
+ mov lr, r11
+ mov pc, lr
+
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+system_clock_init:
+ ldr r0, =S5PC1XX_CLOCK_BASE @ 0xE0100000
+
+ /* Check S5PC100 */
+ cmp r7, r8
+ bne 110f
+100:
+ /* Set Lock Time */
+ ldr r1, =0xe10 @ Locktime : 0xe10 = 3600
+ str r1, [r0, #0x000] @ S5PC100_APLL_LOCK
+ str r1, [r0, #0x004] @ S5PC100_MPLL_LOCK
+ str r1, [r0, #0x008] @ S5PC100_EPLL_LOCK
+ str r1, [r0, #0x00C] @ S5PC100_HPLL_LOCK
+
+ /* S5P_APLL_CON */
+ ldr r1, =0x81bc0400 @ SDIV 0, PDIV 4, MDIV 444 (1333MHz)
+ str r1, [r0, #0x100]
+ /* S5P_MPLL_CON */
+ ldr r1, =0x80590201 @ SDIV 1, PDIV 2, MDIV 89 (267MHz)
+ str r1, [r0, #0x104]
+ /* S5P_EPLL_CON */
+ ldr r1, =0x80870303 @ SDIV 3, PDIV 3, MDIV 135 (67.5MHz)
+ str r1, [r0, #0x108]
+ /* S5P_HPLL_CON */
+ ldr r1, =0x80600603 @ SDIV 3, PDIV 6, MDIV 96
+ str r1, [r0, #0x10C]
+
+ ldr r1, [r0, #0x300]
+ ldr r2, =0x00003fff
+ bic r1, r1, r2
+ ldr r2, =0x00011301
+
+ orr r1, r1, r2
+ str r1, [r0, #0x300]
+ ldr r1, [r0, #0x304]
+ ldr r2, =0x00011110
+ orr r1, r1, r2
+ str r1, [r0, #0x304]
+ ldr r1, =0x00000001
+ str r1, [r0, #0x308]
+
+ /* Set Source Clock */
+ ldr r1, =0x00001111 @ A, M, E, HPLL Muxing
+ str r1, [r0, #0x200] @ S5PC1XX_CLK_SRC0
+
+ b 200f
+110:
+ ldr r0, =0xE010C000 @ S5PC110_PWR_CFG
+
+ /* Set OSC_FREQ value */
+ ldr r1, =0xf
+ str r1, [r0, #0x100] @ S5PC110_OSC_FREQ
+
+ /* Set MTC_STABLE value */
+ ldr r1, =0xffffffff
+ str r1, [r0, #0x110] @ S5PC110_MTC_STABLE
+
+ /* Set CLAMP_STABLE value */
+ ldr r1, =0x3ff03ff
+ str r1, [r0, #0x114] @ S5PC110_CLAMP_STABLE
+
+ ldr r0, =S5PC1XX_CLOCK_BASE @ 0xE0100000
+
+ /* Set Clock divider */
+ ldr r1, =0x14131330 @ 1:1:4:4, 1:4:5
+ str r1, [r0, #0x300]
+ ldr r1, =0x11110111 @ UART[3210]: MMC[3210]
+ str r1, [r0, #0x310]
+
+ /* Set Lock Time */
+ ldr r1, =0x2cf @ Locktime : 30us
+ str r1, [r0, #0x000] @ S5PC110_APLL_LOCK
+ ldr r1, =0xe10 @ Locktime : 0xe10 = 3600
+ str r1, [r0, #0x008] @ S5PC110_MPLL_LOCK
+ str r1, [r0, #0x010] @ S5PC110_EPLL_LOCK
+ str r1, [r0, #0x020] @ S5PC110_VPLL_LOCK
+
+ /* S5PC110_APLL_CON */
+ ldr r1, =0x80C80601 @ 800MHz
+ str r1, [r0, #0x100]
+ /* S5PC110_MPLL_CON */
+ ldr r1, =0x829B0C01 @ 667MHz
+ str r1, [r0, #0x108]
+ /* S5PC110_EPLL_CON */
+ ldr r1, =0x80600602 @ 96MHz VSEL 0 P 6 M 96 S 2
+ str r1, [r0, #0x110]
+ /* S5PC110_VPLL_CON */
+ ldr r1, =0x806C0603 @ 54MHz
+ str r1, [r0, #0x120]
+
+ /* Set Source Clock */
+ ldr r1, =0x10001111 @ A, M, E, VPLL Muxing
+ str r1, [r0, #0x200] @ S5PC1XX_CLK_SRC0
+
+ /* OneDRAM(DMC0) clock setting */
+ ldr r1, =0x01000000 @ ONEDRAM_SEL[25:24] 1 SCLKMPLL
+ str r1, [r0, #0x218] @ S5PC110_CLK_SRC6
+ ldr r1, =0x30000000 @ ONEDRAM_RATIO[31:28] 3 + 1
+ str r1, [r0, #0x318] @ S5PC110_CLK_DIV6
+
+ /* XCLKOUT = XUSBXTI 24MHz */
+ add r2, r0, #0xE000 @ S5PC110_OTHERS
+ ldr r1, [r2]
+ orr r1, r1, #(0x3 << 8) @ CLKOUT[9:8] 3 XUSBXTI
+ str r1, [r2]
+
+ /* CLK_IP0 */
+ ldr r1, =0x8fefeeb @ DMC[1:0] PDMA0[3] IMEM[5]
+ str r1, [r0, #0x460] @ S5PC110_CLK_IP0
+
+ /* CLK_IP1 */
+ ldr r1, =0xe9fdf0f9 @ FIMD[0] USBOTG[16]
+ @ NANDXL[24]
+ str r1, [r0, #0x464] @ S5PC110_CLK_IP1
+
+ /* CLK_IP2 */
+ ldr r1, =0xf75f7fc @ CORESIGHT[8] MODEM[9]
+ @ HOSTIF[10] HSMMC0[16]
+ @ HSMMC2[18] VIC[27:24]
+ str r1, [r0, #0x468] @ S5PC110_CLK_IP2
+
+ /* CLK_IP3 */
+ ldr r1, =0x8eff038c @ I2C[8:6]
+ @ SYSTIMER[16] UART0[17]
+ @ UART1[18] UART2[19]
+ @ UART3[20] WDT[22]
+ @ PWM[23] GPIO[26] SYSCON[27]
+ str r1, [r0, #0x46c] @ S5PC110_CLK_IP3
+
+ /* CLK_IP4 */
+ ldr r1, =0xfffffff1 @ CHIP_ID[0] TZPC[8:5]
+ str r1, [r0, #0x470] @ S5PC110_CLK_IP3
+
+200:
+ /* wait at least 200us to stablize all clock */
+ mov r2, #0x10000
+1: subs r2, r2, #1
+ bne 1b
+
+ mov pc, lr
+
+#ifndef CONFIG_ONENAND_IPL
+internal_ram_init:
+ ldreq r0, =0xE3800000
+ ldrne r0, =0xF1500000
+ ldr r1, =0x0
+ str r1, [r0]
+
+ mov pc, lr
+#endif
+
+#ifndef CONFIG_ONENAND_IPL
+/*
+ * uart_asm_init: Initialize UART's pins
+ */
+uart_asm_init:
+ /* set GPIO to enable UART0-UART4 */
+ mov r0, r8
+ ldr r1, =0x22222222
+ str r1, [r0, #0x0] @ S5PC100_GPIO_A0_OFFSET
+ ldr r1, =0x00002222
+ str r1, [r0, #0x20] @ S5PC100_GPIO_A1_OFFSET
+
+ /* Check S5PC100 */
+ cmp r7, r8
+ bne 110f
+
+ /* UART_SEL GPK0[5] at S5PC100 */
+ add r0, r8, #0x2A0 @ S5PC100_GPIO_K0_OFFSET
+ ldr r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET
+ bic r1, r1, #(0xf << 20) @ 20 = 5 * 4-bit
+ orr r1, r1, #(0x1 << 20) @ Output
+ str r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET
+
+ ldr r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET
+ bic r1, r1, #(0x3 << 10) @ 10 = 5 * 2-bit
+ orr r1, r1, #(0x2 << 10) @ Pull-up enabled
+ str r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET
+
+ ldr r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET
+ orr r1, r1, #(1 << 5) @ 5 = 5 * 1-bit
+ str r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET
+
+ b 200f
+110:
+ /*
+ * Note that the following address
+ * 0xE020'0360 is reserved address at S5PC100
+ */
+ /* UART_SEL MP0_5[7] at S5PC110 */
+ add r0, r8, #0x360 @ S5PC110_GPIO_MP0_5_OFFSET
+ ldr r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET
+ bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit
+ orr r1, r1, #(0x1 << 28) @ Output
+ str r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET
+
+ ldr r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET
+ bic r1, r1, #(0x3 << 14) @ 14 = 7 * 2-bit
+ orr r1, r1, #(0x2 << 14) @ Pull-up enabled
+ str r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET
+
+ ldr r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET
+ orr r1, r1, #(1 << 7) @ 7 = 7 * 1-bit
+ str r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET
+200:
+ mov pc, lr
+#endif
diff --git a/board/samsung/goni/mem_setup.S b/board/samsung/goni/mem_setup.S
new file mode 100644
index 0000000..c4d2845
--- /dev/null
+++ b/board/samsung/goni/mem_setup.S
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2009 Samsung Electrnoics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+ .globl mem_ctrl_asm_init
+mem_ctrl_asm_init:
+ cmp r7, r8
+
+ ldreq r0, =S5PC100_DMC_BASE @ 0xE6000000
+ ldrne r0, =S5PC110_DMC0_BASE @ 0xF0000000
+ ldrne r6, =S5PC110_DMC1_BASE @ 0xF1400000
+
+ /* DLL parameter setting */
+ ldr r1, =0x50101000
+ str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET
+ strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET
+ ldr r1, =0x000000f4
+ str r1, [r0, #0x01C] @ PHYCONTROL1_OFFSET
+ strne r1, [r6, #0x01C] @ PHYCONTROL1_OFFSET
+ ldreq r1, =0x0
+ streq r1, [r0, #0x020] @ PHYCONTROL2_OFFSET
+
+ /* DLL on */
+ ldr r1, =0x50101002
+ str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET
+ strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET
+
+ /* DLL start */
+ ldr r1, =0x50101003
+ str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET
+ strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET
+
+ mov r2, #0x4000
+wait: subs r2, r2, #0x1
+ cmp r2, #0x0
+ bne wait
+
+ cmp r7, r8
+ /* Force value locking for DLL off */
+ str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET
+ strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET
+
+ /* DLL off */
+ ldr r1, =0x50101009
+ str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET
+ strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET
+
+ /* auto refresh off */
+ ldr r1, =0xff001010 | (1 << 7)
+ ldr r2, =0xff001010 | (1 << 7)
+ str r1, [r0, #0x000] @ CONCONTROL_OFFSET
+ strne r2, [r6, #0x000] @ CONCONTROL_OFFSET
+
+ /*
+ * Burst Length 4, 2 chips, 32-bit, LPDDR
+ * OFF: dynamic self refresh, force precharge, dynamic power down off
+ */
+ ldr r1, =0x00212100
+ ldr r2, =0x00212100
+ str r1, [r0, #0x004] @ MEMCONTROL_OFFSET
+ strne r2, [r6, #0x004] @ MEMCONTROL_OFFSET
+
+ /*
+ * Note:
+ * If Bank0 has Mobile RAM we place it at 0x3800'0000 (s5pc100 only)
+ * So finally Bank1 OneDRAM should address start at at 0x3000'0000
+ */
+
+ /*
+ * DMC0: CS0 : S5PC100/S5PC110
+ * 0x30 -> 0x30000000
+ * 0xf8 -> 0x37FFFFFF
+ * [15:12] 0: Linear
+ * [11:8 ] 2: 9 bits
+ * [ 7:4 ] 2: 14 bits
+ * [ 3:0 ] 2: 4 banks
+ */
+ ldr r3, =0x30f80222
+ ldr r4, =0x40f00222
+swap_memory:
+ str r3, [r0, #0x008] @ MEMCONFIG0_OFFSET
+ str r4, [r0, #0x00C] @ dummy write
+
+ /*
+ * DMC1: CS0 : S5PC110
+ * 0x40 -> 0x40000000
+ * 0xf8 -> 0x47FFFFFF (1Gib)
+ * 0x40 -> 0x40000000
+ * 0xf0 -> 0x4FFFFFFF (2Gib)
+ * [15:12] 0: Linear
+ * [11:8 ] 2: 9 bits - Col (1Gib)
+ * [11:8 ] 3: 10 bits - Col (2Gib)
+ * [ 7:4 ] 2: 14 bits - Row
+ * [ 3:0 ] 2: 4 banks
+ */
+ /* Default : 2GiB */
+ ldr r4, =0x40f01322 @ 2Gib: MCP B
+ ldr r5, =0x50f81312 @ dummy: MCP D
+ cmp r9, #1
+ ldreq r4, =0x40f81222 @ 1Gib: MCP A
+ cmp r9, #3
+ ldreq r5, =0x50f81312 @ 2Gib + 1Gib: MCP D
+ cmp r9, #4
+ ldreq r5, =0x50f01312 @ 2Gib + 2Gib: MCP E
+
+ cmp r7, r8
+ strne r4, [r6, #0x008] @ MEMCONFIG0_OFFSET
+ strne r5, [r6, #0x00C] @ MEMCONFIG1_OFFSET
+
+ /*
+ * DMC0: CS1: S5PC100
+ * 0x38 -> 0x38000000
+ * 0xf8 -> 0x3fFFFFFF
+ * [15:12] 0: Linear
+ * [11:8 ] 2: 9 bits
+ * [ 7:4 ] 2: 14 bits
+ * [ 3:0 ] 2: 4 banks
+ */
+ eoreq r3, r3, #0x08000000
+ streq r3, [r0, #0xc] @ MEMCONFIG1_OFFSET
+
+ ldr r1, =0x20000000
+ str r1, [r0, #0x014] @ PRECHCONFIG_OFFSET
+ strne r1, [r0, #0x014] @ PRECHCONFIG_OFFSET
+ strne r1, [r6, #0x014] @ PRECHCONFIG_OFFSET
+
+ /*
+ * S5PC100:
+ * DMC: CS0: 166MHz
+ * CS1: 166MHz
+ * S5PC110:
+ * DMC0: CS0: 166MHz
+ * DMC1: CS0: 200MHz
+ *
+ * 7.8us * 200MHz %LE %LONG1560(0x618)
+ * 7.8us * 166MHz %LE %LONG1294(0x50E)
+ * 7.8us * 133MHz %LE %LONG1038(0x40E),
+ * 7.8us * 100MHz %LE %LONG780(0x30C),
+ */
+ ldr r1, =0x0000050E
+ str r1, [r0, #0x030] @ TIMINGAREF_OFFSET
+ ldrne r1, =0x00000618
+ strne r1, [r6, #0x030] @ TIMINGAREF_OFFSET
+
+ ldr r1, =0x14233287
+ str r1, [r0, #0x034] @ TIMINGROW_OFFSET
+ ldrne r1, =0x182332c8
+ strne r1, [r6, #0x034] @ TIMINGROW_OFFSET
+
+ ldr r1, =0x12130005
+ str r1, [r0, #0x038] @ TIMINGDATA_OFFSET
+ ldrne r1, =0x13130005
+ strne r1, [r6, #0x038] @ TIMINGDATA_OFFSET
+
+ ldr r1, =0x0E140222
+ str r1, [r0, #0x03C] @ TIMINGPOWER_OFFSET
+ ldrne r1, =0x0E180222
+ strne r1, [r6, #0x03C] @ TIMINGPOWER_OFFSET
+
+ /* chip0 Deselect */
+ ldr r1, =0x07000000
+ str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
+ strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
+
+ /* chip0 PALL */
+ ldr r1, =0x01000000
+ str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
+ strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
+
+ /* chip0 REFA */
+ ldr r1, =0x05000000
+ str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
+ strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
+ /* chip0 REFA */
+ str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
+ strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
+
+ /* chip0 MRS */
+ ldr r1, =0x00000032
+ str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
+ strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
+
+ /* chip0 EMRS */
+ ldr r1, =0x00020020
+ str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
+ strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
+
+ /* chip1 Deselect */
+ ldr r1, =0x07100000
+ str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
+ strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
+
+ /* chip1 PALL */
+ ldr r1, =0x01100000
+ str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
+ strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
+
+ /* chip1 REFA */
+ ldr r1, =0x05100000
+ str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
+ strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
+ /* chip1 REFA */
+ str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
+ strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
+
+ /* chip1 MRS */
+ ldr r1, =0x00100032
+ str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
+ strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
+
+ /* chip1 EMRS */
+ ldr r1, =0x00120020
+ str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
+ strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
+
+ /* auto refresh on */
+ ldr r1, =0xFF002030 | (1 << 7)
+ str r1, [r0, #0x000] @ CONCONTROL_OFFSET
+ strne r1, [r6, #0x000] @ CONCONTROL_OFFSET
+
+ /* PwrdnConfig */
+ ldr r1, =0x00100002
+ str r1, [r0, #0x028] @ PWRDNCONFIG_OFFSET
+ strne r1, [r6, #0x028] @ PWRDNCONFIG_OFFSET
+
+ ldr r1, =0x00212113
+ str r1, [r0, #0x004] @ MEMCONTROL_OFFSET
+ strne r1, [r6, #0x004] @ MEMCONTROL_OFFSET
+
+ /* Skip when S5PC110 */
+ bne 1f
+
+ /* Check OneDRAM access area at s5pc100 */
+ ldreq r3, =0x38f80222
+ ldreq r1, =0x37ffff00
+ str r3, [r1]
+ ldr r2, [r1]
+ cmp r2, r3
+ beq swap_memory
+1:
+ mov pc, lr
+
+ .ltorg
diff --git a/board/samsung/goni/onenand.c b/board/samsung/goni/onenand.c
new file mode 100644
index 0000000..8d3769b
--- /dev/null
+++ b/board/samsung/goni/onenand.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2008-2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/samsung_onenand.h>
+#include <onenand_uboot.h>
+
+void onenand_board_init(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+
+ this->base = (void *)CONFIG_SYS_ONENAND_BASE;
+ this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK;
+}
diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c
index 0439477..a1bcddc 100644
--- a/drivers/gpio/s5p_gpio.c
+++ b/drivers/gpio/s5p_gpio.c
@@ -96,7 +96,7 @@ void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
value |= PULL_MODE(gpio, mode);
break;
default:
- return;
+ break;
}
writel(value, &bank->pull);
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 94695fc..9a40adc 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -513,7 +513,7 @@
/* System IO Config */
#define CONFIG_SYS_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */
-#define CONFIG_SYS_SICRL SICRL_USBDR /* Enable Internal USB Phy */
+#define CONFIG_SYS_SICRL SICRL_USBDR_10 /* Enable Internal USB Phy */
#define CONFIG_SYS_HID0_INIT 0x000000000
#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index 9104f1a..eb8657b 100644
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -419,7 +419,7 @@
| SICRH_TSOBI1 \
| SICRH_TSOBI2 )
#define CONFIG_SYS_SICRL ( SICRL_LBC \
- | SICRL_USBDR \
+ | SICRL_USBDR_10 \
| SICRL_ETSEC2_A )
#define CONFIG_SYS_HID0_INIT 0x000000000
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
new file mode 100644
index 0000000..690f119
--- /dev/null
+++ b/include/configs/pm9g45.h
@@ -0,0 +1,186 @@
+/*
+ * (C) Copyright 2010
+ * Ilko Iliev <iliev@ronetix.at>
+ * Asen Dimov <dimov@ronetix.at>
+ * Ronetix GmbH <www.ronetix.at>
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the PM9G45 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */
+#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC */
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_AT91_GPIO 1
+#define CONFIG_ATMEL_USART 1
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+#define CONFIG_SYS_USE_NANDFLASH 1
+
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIO_PORTD, 31 /* this is the user1 led */
+#define CONFIG_GREEN_LED AT91_PIO_PORTD, 0 /* this is the user2 led */
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE 1
+#define CONFIG_BOOTP_BOOTPATH 1
+#define CONFIG_BOOTP_GATEWAY 1
+#define CONFIG_BOOTP_HOSTNAME 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_DHCP 1
+#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_USB 1
+
+#define CONFIG_CMD_JFFS2 1
+#define CONFIG_JFFS2_CMDLINE 1
+#define CONFIG_JFFS2_NAND 1
+#define CONFIG_JFFS2_DEV "nand0" /* NAND dev jffs2 lives on */
+#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
+#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition */
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x70000000
+#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
+
+/* NOR flash, not available */
+#define CONFIG_SYS_NO_FLASH 1
+#undef CONFIG_CMD_FLASH
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_MAX_CHIPS 1
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8 1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 3
+
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB 1
+#define CONFIG_RMII 1
+#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_RESET_PHY_R 1
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* _UHP_OHCI_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+
+/* board specific(not enough SRAM) */
+#define CONFIG_AT91SAM9G45_LCD_BASE PHYS_SDRAM + 0xE00000
+
+#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM + 0x2000000 /* load addr */
+
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END CONFIG_AT91SAM9G45_LCD_BASE
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_OFFSET 0x60000
+#define CONFIG_ENV_OFFSET_REDUND 0x80000
+#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm"
+#define CONFIG_BOOTARGS "fbcon=rotate:3 console=tty0 " \
+ "console=ttyS0,115200 " \
+ "root=/dev/mtdblock4 " \
+ "mtdparts=atmel_nand:128k(bootstrap)ro," \
+ "256k(uboot)ro,1664k(env)," \
+ "2M(linux)ro,-(root) rw " \
+ "rootfstype=jffs2"
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
+ 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
new file mode 100644
index 0000000..171ec94
--- /dev/null
+++ b/include/configs/s5p_goni.h
@@ -0,0 +1,217 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Configuation settings for the SAMSUNG Universal (s5pc100) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
+#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
+#define CONFIG_S5PC1XX 1 /* which is in a S5PC1XX Family */
+#define CONFIG_S5PC110 1 /* which is in a S5PC110 */
+#define CONFIG_MACH_GONI 1 /* working with Goni */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+
+/* input clock of PLL: has 24MHz input clock at S5PC110 */
+#define CONFIG_SYS_CLK_FREQ_C110 24000000
+
+/* DRAM Base */
+#define CONFIG_SYS_SDRAM_BASE 0x30000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/*
+ * Size of malloc() pool
+ * 1MB = 0x100000, 0x100000 = 1024 * 1024
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for */
+ /* initial data */
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL2 1 /* use SERIAL2 */
+#define CONFIG_SERIAL_MULTI 1
+#define CONFIG_BAUDRATE 115200
+
+/* It should define before config_cmd_default.h */
+#define CONFIG_SYS_NO_FLASH 1
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_XIMG
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_ONENAND
+#define CONFIG_CMD_MTDPARTS
+
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
+#define MTDIDS_DEFAULT "onenand0=samsung-onenand"
+#define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:1m(bootloader)"\
+ ",256k(params)"\
+ ",2816k(config)"\
+ ",8m(csa)"\
+ ",7m(kernel)"\
+ ",1m(log)"\
+ ",12m(modem)"\
+ ",60m(qboot)"\
+ ",-(UBI)\0"
+
+#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+
+#define CONFIG_BOOTCOMMAND "run ubifsboot"
+
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
+
+#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \
+ " ${console} ${meminfo}"
+
+#define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}"
+
+#define CONFIG_BOOTARGS "root=/dev/mtdblock8 ubi.mtd=8 ubi.mtd=3 ubi.mtd=6" \
+ " rootfstype=cramfs " CONFIG_COMMON_BOOT
+
+#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \
+ " onenand write 0x32008000 0x0 0x100000\0"
+
+#define CONFIG_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=3 ubi.mtd=6"
+
+#define CONFIG_UBIFS_OPTION "rootflags=bulk_read,no_chk_data_crc"
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_UPDATEB \
+ "updatek=" \
+ "onenand erase 0xc00000 0x600000;" \
+ "onenand write 0x31008000 0xc00000 0x600000\0" \
+ "updateu=" \
+ "onenand erase 0x01560000 0x1eaa0000;" \
+ "onenand write 0x32000000 0x1260000 0x8C0000\0" \
+ "bootk=" \
+ "onenand read 0x30007FC0 0xc00000 0x600000;" \
+ "bootm 0x30007FC0\0" \
+ "flashboot=" \
+ "set bootargs root=/dev/mtdblock${bootblock} " \
+ "rootfstype=${rootfstype}" CONFIG_UBI_MTD " ${opts} " \
+ "${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \
+ "ubifsboot=" \
+ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
+ CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+ CONFIG_COMMON_BOOT "; run bootk\0" \
+ "tftpboot=" \
+ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
+ CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+ CONFIG_COMMON_BOOT "; tftp 0x30007FC0 uImage; " \
+ "bootm 0x30007FC0\0" \
+ "ramboot=" \
+ "set bootargs " CONFIG_RAMDISK_BOOT \
+ " initrd=0x33000000,8M ramdisk=8192\0" \
+ "mmcboot=" \
+ "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \
+ CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+ CONFIG_COMMON_BOOT "; run bootk\0" \
+ "boottrace=setenv opts initcall_debug; run bootcmd\0" \
+ "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
+ "verify=n\0" \
+ "rootfstype=cramfs\0" \
+ "console=" CONFIG_DEFAULT_CONSOLE \
+ "mtdparts=" MTDPARTS_DEFAULT \
+ "meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \
+ "mmcblk=/dev/mmcblk1p1\0" \
+ "bootblock=9\0" \
+ "ubiblock=8\0" \
+ "ubi=enabled\0" \
+ "opts=always_resume=1"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "Goni # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000000)
+
+#define CONFIG_SYS_HZ 1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */
+
+/* Goni has 3 banks of DRAM, but swap the bank */
+#define CONFIG_NR_DRAM_BANKS 3
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */
+#define PHYS_SDRAM_1_SIZE (80 << 20) /* 80 MB in Bank #0 */
+#define PHYS_SDRAM_2 0x40000000 /* mDDR DMC1 Bank #1 */
+#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in Bank #1 */
+#define PHYS_SDRAM_3 0x50000000 /* mDDR DMC2 Bank #2 */
+#define PHYS_SDRAM_3_SIZE (128 << 20) /* 128 MB in Bank #2 */
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */
+
+/* FLASH and environment organization */
+#define CONFIG_ENV_IS_IN_ONENAND 1
+#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB, 0x40000 */
+#define CONFIG_ENV_ADDR (1 << 20) /* 1 MB, 0x100000 */
+
+#define CONFIG_USE_ONENAND_BOARD_INIT
+#define CONFIG_SAMSUNG_ONENAND 1
+#define CONFIG_SYS_ONENAND_BASE 0xB0000000
+
+#define CONFIG_DOS_PARTITION 1
+
+#endif /* __CONFIG_H */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 44115c9..5214911 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -206,7 +206,10 @@
#define SICRL_SPI_B 0x00C00000
#define SICRL_SPI_C 0x00300000
#define SICRL_SPI_D 0x000C0000
-#define SICRL_USBDR 0x00000C00
+#define SICRL_USBDR_11 0x00000C00
+#define SICRL_USBDR_10 0x00000800
+#define SICRL_USBDR_01 0x00000400
+#define SICRL_USBDR_00 0x00000000
#define SICRL_ETSEC1_A 0x0000000C
#define SICRL_ETSEC2_A 0x00000003
generated by cgit v1.1 at 2024-11-25 07:31:06 +0000