summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--board/mpc8641hpcn/Makefile2
-rw-r--r--board/mpc8641hpcn/config.mk2
-rw-r--r--board/mpc8641hpcn/init.S37
-rw-r--r--board/mpc8641hpcn/mpc8641hpcn.c214
-rw-r--r--board/mpc8641hpcn/oftree.dts158
-rw-r--r--board/mpc8641hpcn/pixis.c324
-rw-r--r--board/mpc8641hpcn/pixis.h33
-rw-r--r--board/mpc8641hpcn/u-boot.lds2
-rw-r--r--common/cmd_boot.c2
-rw-r--r--cpu/mpc86xx/Makefile4
-rw-r--r--cpu/mpc86xx/cache.S28
-rw-r--r--cpu/mpc86xx/config.mk4
-rw-r--r--cpu/mpc86xx/cpu.c402
-rw-r--r--cpu/mpc86xx/cpu_init.c11
-rw-r--r--cpu/mpc86xx/i2c.c6
-rw-r--r--cpu/mpc86xx/interrupts.c42
-rw-r--r--cpu/mpc86xx/spd_sdram.c617
-rw-r--r--cpu/mpc86xx/speed.c69
-rw-r--r--cpu/mpc86xx/start.S15
-rw-r--r--doc/README.mpc8641hpcn123
-rw-r--r--include/asm-ppc/immap_86xx.h4
-rw-r--r--include/configs/MPC8641HPCN.h64
22 files changed, 1420 insertions, 743 deletions
diff --git a/board/mpc8641hpcn/Makefile b/board/mpc8641hpcn/Makefile
index d6037c1..2613730 100644
--- a/board/mpc8641hpcn/Makefile
+++ b/board/mpc8641hpcn/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
-OBJS := $(BOARD).o oftree.o
+OBJS := $(BOARD).o pixis.o oftree.o
SOBJS := init.o
$(LIB): $(OBJS) $(SOBJS)
diff --git a/board/mpc8641hpcn/config.mk b/board/mpc8641hpcn/config.mk
index 4bdceec..989a40b 100644
--- a/board/mpc8641hpcn/config.mk
+++ b/board/mpc8641hpcn/config.mk
@@ -1,5 +1,5 @@
# Copyright 2004 Freescale Semiconductor.
-# Modified by Jeff Brown (jeffrey@freescale.com)
+# Modified by Jeff Brown
#
# See file CREDITS for list of people who contributed to this
# project.
diff --git a/board/mpc8641hpcn/init.S b/board/mpc8641hpcn/init.S
index 4d555a5..69954a8 100644
--- a/board/mpc8641hpcn/init.S
+++ b/board/mpc8641hpcn/init.S
@@ -1,6 +1,6 @@
/*
* Copyright 2004 Freescale Semiconductor.
- * Jeff Brown (jeffrey@freescale.com)
+ * Jeff Brown
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -36,11 +36,10 @@
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
* 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
* 0xc000_0000 0xdfff_ffff RapidIO 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
* 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
* 0xe300_0000 0xe3ff_ffff PCI2 IO 16M
- * 0xf000_0000 0xf7ff_ffff SDRAM 128M
- * 0xf800_0000 0xf80f_ffff BCSR 1M
+ * 0xf800_0000 0xf80f_ffff CCSRBAR 1M
+ * 0xf810_0000 0xf81f_ffff PIXIS 1M
* 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M
*
* Notes:
@@ -60,7 +59,6 @@
#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
#define LAWBAR3 ((CFG_PCI2_MEM_BASE>>12) & 0xffffff)
-/*#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) */
#define LAWAR3 (~LAWAR_EN & (LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)))
/*
@@ -73,14 +71,20 @@
#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
#define LAWBAR6 ((CFG_PCI2_IO_BASE>>12) & 0xffffff)
-/*#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M)) */
#define LAWAR6 (~LAWAR_EN &( LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M)))
- #define LAWBAR7 ((0xfe000000 >>12) & 0xffffff)
- #define LAWAR7 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_32M))
+#define LAWBAR7 ((0xfe000000 >>12) & 0xffffff)
+#define LAWAR7 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_32M))
+#if !defined(CONFIG_SPD_EEPROM)
+#define LAWBAR8 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff)
+#define LAWAR8 (LAWAR_EN | LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+#else
+#define LAWBAR8 0
+#define LAWAR8 ((LAWAR_TRGT_IF_DDR2 | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN)
+#endif
- .section .bootpg, "ax"
+ .section .bootpg, "ax"
.globl law_entry
law_entry:
lis r7,CFG_CCSRBAR@h
@@ -104,8 +108,8 @@ law_entry:
stwu r6, 0x20(r4)
lis r6,LAWAR2@h
- ori r6,r6,LAWAR2@l
- stwu r6, 0x20(r5)
+ ori r6,r6,LAWAR2@l
+ stwu r6, 0x20(r5)
/* LAWBAR3, LAWAR3 */
lis r6,LAWBAR3@h
@@ -121,7 +125,7 @@ law_entry:
ori r6,r6,LAWBAR4@l
stwu r6, 0x20(r4)
- lis r6,LAWAR4@h
+ lis r6,LAWAR4@h
ori r6,r6,LAWAR4@l
stwu r6, 0x20(r5)
/* LAWBAR5, LAWAR5 */
@@ -151,5 +155,14 @@ law_entry:
ori r6,r6,LAWAR7@l
stwu r6, 0x20(r5)
+ /* LAWBAR8, LAWAR8 */
+ lis r6,LAWBAR8@h
+ ori r6,r6,LAWBAR8@l
+ stwu r6, 0x20(r4)
+
+ lis r6,LAWAR8@h
+ ori r6,r6,LAWAR8@l
+ stwu r6, 0x20(r5)
+
blr
diff --git a/board/mpc8641hpcn/mpc8641hpcn.c b/board/mpc8641hpcn/mpc8641hpcn.c
index d02a7ef..c6b2a5b 100644
--- a/board/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/mpc8641hpcn/mpc8641hpcn.c
@@ -1,6 +1,6 @@
/*
* Copyright 2004 Freescale Semiconductor.
- * Jeff Brown (jeffrey@freescale.com)
+ * Jeff Brown
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
@@ -25,6 +25,7 @@
*/
#include <common.h>
+#include <command.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_86xx.h>
@@ -35,20 +36,23 @@
extern void ft_cpu_setup(void *blob, bd_t *bd);
#endif
+#include "pixis.h"
+
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
-extern long int spd_sdram(void);
+#if defined(CONFIG_SPD_EEPROM)
+#include "spd_sdram.h"
+#endif
-void local_bus_init(void);
void sdram_init(void);
long int fixed_sdram(void);
int board_early_init_f (void)
{
- return 0;
+ return 0;
}
int checkboard (void)
@@ -57,41 +61,34 @@ int checkboard (void)
#ifdef CONFIG_PCI
- volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_pex_t *pex1 = &immap->im_pex1;
-
- uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
- uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
- uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
-
-
- if ((io_sel==2 || io_sel==3 || io_sel==5 \
- || io_sel==6 || io_sel==7 || io_sel==0xF)
- && !(devdisr & MPC86xx_DEVDISR_PCIEX1)){
- debug ("PCI-EXPRESS 1: %s \n",
- pex1_agent ? "Agent" : "Host");
- debug("0x%08x=0x%08x ", &pex1->pme_msg_det,pex1->pme_msg_det);
- if (pex1->pme_msg_det) {
- pex1->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",
- pex1->pme_msg_det);
- }
- debug ("\n");
- } else {
- printf ("PCI-EXPRESS 1: Disabled\n");
- }
+ volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile ccsr_pex_t *pex1 = &immap->im_pex1;
+
+ uint devdisr = gur->devdisr;
+ uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
+ uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
+ uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
+
+ if ((io_sel == 2 || io_sel == 3 || io_sel == 5
+ || io_sel == 6 || io_sel == 7 || io_sel == 0xF)
+ && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
+ debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
+ debug("0x%08x=0x%08x ", &pex1->pme_msg_det, pex1->pme_msg_det);
+ if (pex1->pme_msg_det) {
+ pex1->pme_msg_det = 0xffffffff;
+ debug(" with errors. Clearing. Now 0x%08x",
+ pex1->pme_msg_det);
+ }
+ debug ("\n");
+ } else {
+ puts("PCI-EXPRESS 1: Disabled\n");
+ }
#else
- printf("PCI-EXPRESS1: Disabled\n");
+ puts("PCI-EXPRESS1: Disabled\n");
#endif
- /*
- * Initialize local bus.
- */
- local_bus_init();
-
return 0;
}
@@ -100,7 +97,6 @@ long int
initdram(int board_type)
{
long dram_size = 0;
- extern long spd_sdram (void);
#if defined(CONFIG_SPD_EEPROM)
dram_size = spd_sdram ();
@@ -112,7 +108,7 @@ initdram(int board_type)
puts(" DDR: ");
return dram_size;
#endif
-
+
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
* Initialize and enable DDR ECC.
@@ -125,34 +121,6 @@ initdram(int board_type)
}
-/*
- * Initialize Local Bus
- */
-
-void
-local_bus_init(void)
-{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-
- uint clkdiv;
- uint lbc_hz;
- sys_info_t sysinfo;
-
- /*
- * Errata LBC11.
- * Fix Local Bus clock glitch when DLL is enabled.
- *
- * If localbus freq is < 66Mhz, DLL bypass mode must be used.
- * If localbus freq is > 133Mhz, DLL can be safely enabled.
- * Between 66 and 133, the DLL is enabled with an override workaround.
- */
-
- get_sys_info(&sysinfo);
- clkdiv = lbc->lcrr & 0x0f;
- lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-}
-
#if defined(CFG_DRAM_TEST)
int testdram(void)
{
@@ -160,7 +128,7 @@ int testdram(void)
uint *pend = (uint *) CFG_MEMTEST_END;
uint *p;
- printf("SDRAM test phase 1:\n");
+ puts("SDRAM test phase 1:\n");
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
@@ -171,7 +139,7 @@ int testdram(void)
}
}
- printf("SDRAM test phase 2:\n");
+ puts("SDRAM test phase 2:\n");
for (p = pstart; p < pend; p++)
*p = 0x55555555;
@@ -182,7 +150,7 @@ int testdram(void)
}
}
- printf("SDRAM test passed.\n");
+ puts("SDRAM test passed.\n");
return 0;
}
#endif
@@ -207,9 +175,9 @@ long int fixed_sdram(void)
ddr->sdram_mode_1 = CFG_DDR_MODE_1;
ddr->sdram_mode_2 = CFG_DDR_MODE_2;
ddr->sdram_interval = CFG_DDR_INTERVAL;
- ddr->sdram_data_init = CFG_DDR_DATA_INIT;
+ ddr->sdram_data_init = CFG_DDR_DATA_INIT;
ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
- ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
+ ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS;
#if defined (CONFIG_DDR_ECC)
@@ -217,7 +185,7 @@ long int fixed_sdram(void)
ddr->err_sbe = 0x00ff0000;
#endif
asm("sync;isync");
-
+
udelay(500);
#if defined (CONFIG_DDR_ECC)
@@ -228,7 +196,7 @@ long int fixed_sdram(void)
ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
#endif
asm("sync; isync");
-
+
udelay(500);
#endif
return CFG_SDRAM_SIZE * 1024 * 1024;
@@ -281,15 +249,113 @@ ft_board_setup(void *blob, bd_t *bd)
int len;
ft_cpu_setup(blob, bd);
-
+
p = ft_get_prop(blob, "/memory/reg", &len);
if (p != NULL) {
*p++ = cpu_to_be32(bd->bi_memstart);
*p = cpu_to_be32(bd->bi_memsize);
}
-
}
#endif
+void
+mpc8641_reset_board(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char cmd;
+ ulong val;
+ ulong corepll;
+ /*
+ * No args is a simple reset request.
+ */
+ if (argv <= 0) {
+ out8(PIXIS_BASE + PIXIS_RST, 0);
+ /* not reached */
+ }
+
+ cmd = argv[1][1];
+ switch (cmd) {
+ case 'f': /* reset with frequency changed */
+ if (argc < 5)
+ goto my_usage;
+ read_from_px_regs(0);
+
+ val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));
+
+ corepll = strfractoint(argv[3]);
+ val = val + set_px_corepll(corepll);
+ val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
+ if (val == 3) {
+ puts("Setting registers VCFGEN0 and VCTL\n");
+ read_from_px_regs(1);
+ puts("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
+ set_px_go();
+ } else
+ goto my_usage;
+
+ while (1); /* Not reached */
+
+ case 'l':
+ if (argv[2][1] == 'f') {
+ read_from_px_regs(0);
+ read_from_px_regs_altbank(0);
+ /* reset with frequency changed */
+ val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));
+
+ corepll = strfractoint(argv[4]);
+ val = val + set_px_corepll(corepll);
+ val = val + set_px_mpxpll(simple_strtoul(argv[5], NULL, 10));
+ if (val == 3) {
+ puts("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
+ set_altbank();
+ read_from_px_regs(1);
+ read_from_px_regs_altbank(1);
+ puts("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
+ set_px_go_with_watchdog();
+ } else
+ goto my_usage;
+
+ while(1); /* Not reached */
+
+ } else if(argv[2][1] == 'd'){
+ /*
+ * Reset from alternate bank without changing
+ * frequencies but with watchdog timer enabled.
+ */
+ read_from_px_regs(0);
+ read_from_px_regs_altbank(0);
+ puts("Setting registers VCFGEN1, VBOOT, and VCTL\n");
+ set_altbank();
+ read_from_px_regs_altbank(1);
+ puts("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
+ set_px_go_with_watchdog();
+ while(1); /* Not reached */
+
+ } else {
+ /*
+ * Reset from next bank without changing
+ * frequency and without watchdog timer enabled.
+ */
+ read_from_px_regs(0);
+ read_from_px_regs_altbank(0);
+ if(argc > 2)
+ goto my_usage;
+ puts("Setting registers VCFGNE1, VBOOT, and VCTL\n");
+ set_altbank();
+ read_from_px_regs_altbank(1);
+ puts("Resetting board to boot from the other bank....\n");
+ set_px_go();
+ }
+
+ default:
+ goto my_usage;
+ }
+
+my_usage:
+ puts("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
+ puts(" reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
+ puts(" reset altbank [wd]\n");
+ puts("For example: reset cf 40 2.5 10\n");
+ puts("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
+}
diff --git a/board/mpc8641hpcn/oftree.dts b/board/mpc8641hpcn/oftree.dts
index ef28fc3..a11c321 100644
--- a/board/mpc8641hpcn/oftree.dts
+++ b/board/mpc8641hpcn/oftree.dts
@@ -18,7 +18,7 @@
linux,phandle = <100>;
cpus {
- #cpus = <1>;
+ #cpus = <2>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
@@ -30,19 +30,32 @@
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <8000>; // L1, 32K
i-cache-size = <8000>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
- bus-frequency = <0>; // 166 MHz
- clock-frequency = <0>; // 825 MHz, from uboot
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
32-bit;
linux,phandle = <201>;
linux,boot-cpu;
};
+ PowerPC,8641@1 {
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ 32-bit;
+ linux,phandle = <202>;
+ };
};
memory {
device_type = "memory";
linux,phandle = <300>;
- reg = <00000000 10000000>; // 256M at 0x0
+ reg = <00000000 40000000>; // 1G at 0x0
};
soc8641@f8000000 {
@@ -63,6 +76,15 @@
dfsrr;
};
+ i2c@3100 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3100 100>;
+ interrupts = <2b 0>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
@@ -73,28 +95,28 @@
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
- interrupts = <a 0>;
+ interrupts = <3a 0>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
- interrupts = <a 0>;
+ interrupts = <3a 0>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@2 {
linux,phandle = <2452002>;
interrupt-parent = <40000>;
- interrupts = <a 0>;
+ interrupts = <3a 0>;
reg = <2>;
device_type = "ethernet-phy";
};
ethernet-phy@3 {
linux,phandle = <2452003>;
interrupt-parent = <40000>;
- interrupts = <a 0>;
+ interrupts = <3a 0>;
reg = <3>;
device_type = "ethernet-phy";
};
@@ -154,8 +176,8 @@
serial@4500 {
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
+ reg = <4500 100>;
+ clock-frequency = <0>;
interrupts = <2a 3>;
interrupt-parent = <40000>;
};
@@ -163,12 +185,120 @@
serial@4600 {
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 3>;
+ reg = <4600 100>;
+ clock-frequency = <0>;
+ interrupts = <1c 3>;
interrupt-parent = <40000>;
};
+ pci@8000 {
+ compatible = "86xx";
+ device_type = "pci";
+ linux,phandle = <8000>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ bus-range = <0 fe>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <1fca055>;
+ interrupt-parent = <40000>;
+ interrupts = <8 0>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x11 */
+ 8800 0 0 1 40000 3 0
+ 8800 0 0 2 40000 4 0
+ 8800 0 0 3 40000 5 0
+ 8800 0 0 4 40000 6 0
+
+ /* IDSEL 0x12 */
+ 9000 0 0 1 40000 4 0
+ 9000 0 0 2 40000 5 0
+ 9000 0 0 3 40000 6 0
+ 9000 0 0 4 40000 3 0
+
+ /* IDSEL 0x13 */
+ 9800 0 0 1 40000 5 0
+ 9800 0 0 2 40000 6 0
+ 9800 0 0 3 40000 3 0
+ 9800 0 0 4 40000 4 0
+
+ /* IDSEL 0x14 */
+ a000 0 0 1 40000 6 0
+ a000 0 0 2 40000 3 0
+ a000 0 0 3 40000 4 0
+ a000 0 0 4 40000 5 0
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 40000 0 0
+ a800 0 0 2 40000 0 0
+ a800 0 0 3 40000 0 0
+ a800 0 0 4 40000 0 0
+
+ /* IDSEL 0x16 */
+ b000 0 0 1 40000 0 0
+ b000 0 0 2 40000 0 0
+ b000 0 0 3 40000 0 0
+ b000 0 0 4 40000 0 0
+
+ /* IDSEL 0x17 */
+ b800 0 0 1 40000 0 0
+ b800 0 0 2 40000 0 0
+ b800 0 0 3 40000 0 0
+ b800 0 0 4 40000 0 0
+
+ /* IDSEL 0x18 */
+ c000 0 0 1 40000 0 0
+ c000 0 0 2 40000 0 0
+ c000 0 0 3 40000 0 0
+ c000 0 0 4 40000 0 0
+
+ /* IDSEL 0x19 */
+ c800 0 0 1 40000 0 0
+ c800 0 0 2 40000 0 0
+ c800 0 0 3 40000 0 0
+ c800 0 0 4 40000 0 0
+
+ /* IDSEL 0x1a */
+ d000 0 0 1 40000 0 0
+ d000 0 0 2 40000 0 0
+ d000 0 0 3 40000 0 0
+ d000 0 0 4 40000 0 0
+
+
+ /* IDSEL 0x1b */
+ d800 0 0 1 40000 0 0
+ d800 0 0 2 40000 0 0
+ d800 0 0 3 40000 0 0
+ d800 0 0 4 40000 0 0
+
+ /* IDSEL 0x1c */
+ e000 0 0 1 40000 0 0
+ e000 0 0 2 40000 0 0
+ e000 0 0 3 40000 0 0
+ e000 0 0 4 40000 0 0
+
+ /* IDSEL 0x1d */
+ e800 0 0 1 40000 0 0
+ e800 0 0 2 40000 0 0
+ e800 0 0 3 40000 0 0
+ e800 0 0 4 40000 0 0
+
+ /* IDSEL 0x1e */
+ f000 0 0 1 40000 0 0
+ f000 0 0 2 40000 0 0
+ f000 0 0 3 40000 0 0
+ f000 0 0 4 40000 0 0
+
+ /* IDSEL 0x1f */
+ f800 0 0 1 40000 6 0
+ f800 0 0 2 40000 6 0
+ f800 0 0 3 40000 6 0
+ f800 0 0 4 40000 6 0
+ >;
+ };
pic@40000 {
linux,phandle = <40000>;
clock-frequency = <0>;
diff --git a/board/mpc8641hpcn/pixis.c b/board/mpc8641hpcn/pixis.c
new file mode 100644
index 0000000..f226b3e
--- /dev/null
+++ b/board/mpc8641hpcn/pixis.c
@@ -0,0 +1,324 @@
+/*
+ * Copyright 2006 Freescale Semiconductor
+ * Jeff Brown
+ * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/cache.h>
+#include <mpc86xx.h>
+
+#include "pixis.h"
+
+
+/*
+ * Per table 27, page 58 of MPC8641HPCN spec.
+ */
+int set_px_sysclk(ulong sysclk)
+{
+ u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux;
+
+ switch (sysclk) {
+ case 33:
+ sysclk_s = 0x04;
+ sysclk_r = 0x04;
+ sysclk_v = 0x07;
+ sysclk_aux = 0x00;
+ break;
+ case 40:
+ sysclk_s = 0x01;
+ sysclk_r = 0x1F;
+ sysclk_v = 0x20;
+ sysclk_aux = 0x01;
+ break;
+ case 50:
+ sysclk_s = 0x01;
+ sysclk_r = 0x1F;
+ sysclk_v = 0x2A;
+ sysclk_aux = 0x02;
+ break;
+ case 66:
+ sysclk_s = 0x01;
+ sysclk_r = 0x04;
+ sysclk_v = 0x04;
+ sysclk_aux = 0x03;
+ break;
+ case 83:
+ sysclk_s = 0x01;
+ sysclk_r = 0x1F;
+ sysclk_v = 0x4B;
+ sysclk_aux = 0x04;
+ break;
+ case 100:
+ sysclk_s = 0x01;
+ sysclk_r = 0x1F;
+ sysclk_v = 0x5C;
+ sysclk_aux = 0x05;
+ break;
+ case 134:
+ sysclk_s = 0x06;
+ sysclk_r = 0x1F;
+ sysclk_v = 0x3B;
+ sysclk_aux = 0x06;
+ break;
+ case 166:
+ sysclk_s = 0x06;
+ sysclk_r = 0x1F;
+ sysclk_v = 0x4B;
+ sysclk_aux = 0x07;
+ break;
+ default:
+ printf("Unsupported SYSCLK frequency.\n");
+ return 0;
+ }
+
+ vclkh = (sysclk_s << 5) | sysclk_r ;
+ vclkl = sysclk_v;
+
+ out8(PIXIS_BASE + PIXIS_VCLKH, vclkh);
+ out8(PIXIS_BASE + PIXIS_VCLKL, vclkl);
+
+ out8(PIXIS_BASE + PIXIS_AUX,sysclk_aux);
+
+ return 1;
+}
+
+
+int set_px_mpxpll(ulong mpxpll)
+{
+ u8 tmp;
+ u8 val;
+
+ switch (mpxpll) {
+ case 2:
+ case 4:
+ case 6:
+ case 8:
+ case 10:
+ case 12:
+ case 14:
+ case 16:
+ val = (u8)mpxpll;
+ break;
+ default:
+ printf("Unsupported MPXPLL ratio.\n");
+ return 0;
+ }
+
+ tmp = in8(PIXIS_BASE + PIXIS_VSPEED1);
+ tmp = (tmp & 0xF0) | (val & 0x0F);
+ out8(PIXIS_BASE + PIXIS_VSPEED1, tmp);
+
+ return 1;
+}
+
+
+int set_px_corepll(ulong corepll)
+{
+ u8 tmp;
+ u8 val;
+
+ switch ((int)corepll) {
+ case 20:
+ val = 0x08;
+ break;
+ case 25:
+ val = 0x0C;
+ break;
+ case 30:
+ val = 0x10;
+ break;
+ case 35:
+ val = 0x1C;
+ break;
+ case 40:
+ val = 0x14;
+ break;
+ case 45:
+ val = 0x0E;
+ break;
+ default:
+ printf("Unsupported COREPLL ratio.\n");
+ return 0;
+ }
+
+ tmp = in8(PIXIS_BASE + PIXIS_VSPEED0);
+ tmp = (tmp & 0xE0) | (val & 0x1F);
+ out8(PIXIS_BASE + PIXIS_VSPEED0, tmp);
+
+ return 1;
+}
+
+
+void read_from_px_regs(int set)
+{
+ u8 mask = 0x1C;
+ u8 tmp = in8(PIXIS_BASE + PIXIS_VCFGEN0);
+
+ if (set)
+ tmp = tmp | mask;
+ else
+ tmp = tmp & ~mask;
+ out8(PIXIS_BASE + PIXIS_VCFGEN0, tmp);
+}
+
+
+void read_from_px_regs_altbank(int set)
+{
+ u8 mask = 0x04;
+ u8 tmp = in8(PIXIS_BASE + PIXIS_VCFGEN1);
+
+ if (set)
+ tmp = tmp | mask;
+ else
+ tmp = tmp & ~mask;
+ out8(PIXIS_BASE + PIXIS_VCFGEN1, tmp);
+}
+
+
+void set_altbank(void)
+{
+ u8 tmp;
+
+ tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
+ tmp ^= 0x40;
+
+ out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
+}
+
+
+void set_px_go(void)
+{
+ u8 tmp;
+
+ tmp = in8(PIXIS_BASE + PIXIS_VCTL);
+ tmp = tmp & 0x1E;
+ out8(PIXIS_BASE + PIXIS_VCTL, tmp);
+
+ tmp = in8(PIXIS_BASE + PIXIS_VCTL);
+ tmp = tmp | 0x01;
+ out8(PIXIS_BASE + PIXIS_VCTL, tmp);
+}
+
+
+void set_px_go_with_watchdog(void)
+{
+ u8 tmp;
+
+ tmp = in8(PIXIS_BASE + PIXIS_VCTL);
+ tmp = tmp & 0x1E;
+ out8(PIXIS_BASE + PIXIS_VCTL, tmp);
+
+ tmp = in8(PIXIS_BASE + PIXIS_VCTL);
+ tmp = tmp | 0x09;
+ out8(PIXIS_BASE + PIXIS_VCTL, tmp);
+}
+
+
+int disable_watchdog(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ u8 tmp;
+
+ tmp = in8(PIXIS_BASE + PIXIS_VCTL);
+ tmp = tmp & 0x1E;
+ out8(PIXIS_BASE + PIXIS_VCTL, tmp);
+
+ /* setting VCTL[WDEN] to 0 to disable watch dog */
+ tmp = in8(PIXIS_BASE + PIXIS_VCTL);
+ tmp &= ~ 0x08;
+ out8(PIXIS_BASE + PIXIS_VCTL, tmp);
+
+ return 0;
+}
+
+
+U_BOOT_CMD(
+ diswd, 1, 0, disable_watchdog,
+ "diswd - Disable watchdog timer \n",
+ NULL
+);
+
+
+/*
+ * This function takes the non-integral cpu:mpx pll ratio
+ * and converts it to an integer that can be used to assign
+ * FPGA register values.
+ * input: strptr i.e. argv[2]
+ */
+
+ulong strfractoint(uchar *strptr)
+{
+ int i, j, retval;
+ int mulconst;
+ int intarr_len = 0, decarr_len = 0, no_dec = 0;
+ ulong intval = 0, decval = 0;
+ uchar intarr[3], decarr[3];
+
+ /* Assign the integer part to intarr[]
+ * If there is no decimal point i.e.
+ * if the ratio is an integral value
+ * simply create the intarr.
+ */
+ i = 0;
+ while (strptr[i] != 46) {
+ if (strptr[i] == 0) {
+ no_dec = 1;
+ break;
+ }
+ intarr[i] = strptr[i];
+ i++;
+ }
+
+ /* Assign length of integer part to intarr_len. */
+ intarr_len = i;
+ intarr[i] = '\0';
+
+ if (no_dec) {
+ /* Currently needed only for single digit corepll ratios */
+ mulconst=10;
+ decval = 0;
+ } else {
+ j = 0;
+ i++; /* Skipping the decimal point */
+ while ((strptr[i] > 47) && (strptr[i] < 58)) {
+ decarr[j] = strptr[i];
+ i++;
+ j++;
+ }
+
+ decarr_len = j;
+ decarr[j] = '\0';
+
+ mulconst = 1;
+ for (i = 0; i < decarr_len; i++)
+ mulconst *= 10;
+ decval = simple_strtoul(decarr, NULL, 10);
+ }
+
+ intval = simple_strtoul(intarr, NULL, 10);
+ intval = intval * mulconst;
+
+ retval = intval + decval;
+
+ return retval;
+}
diff --git a/board/mpc8641hpcn/pixis.h b/board/mpc8641hpcn/pixis.h
new file mode 100644
index 0000000..cd9a45d
--- /dev/null
+++ b/board/mpc8641hpcn/pixis.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2006 Freescale Semiconductor
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+extern int set_px_sysclk(ulong sysclk);
+extern int set_px_mpxpll(ulong mpxpll);
+extern int set_px_corepll(ulong corepll);
+extern void read_from_px_regs(int set);
+extern void read_from_px_regs_altbank(int set);
+extern void set_altbank(void);
+extern void set_px_go(void);
+extern void set_px_go_with_watchdog(void);
+extern int disable_watchdog(cmd_tbl_t *cmdtp,
+ int flag, int argc, char *argv[]);
+extern ulong strfractoint(uchar *strptr);
diff --git a/board/mpc8641hpcn/u-boot.lds b/board/mpc8641hpcn/u-boot.lds
index c5c40e7..b34de8e 100644
--- a/board/mpc8641hpcn/u-boot.lds
+++ b/board/mpc8641hpcn/u-boot.lds
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2004, Freescale, Inc.
* (C) Copyright 2002,2003, Motorola,Inc.
- * Jeff Brown (jeffrey@freescale.com)
+ * Jeff Brown
*
* See file CREDITS for list of people who contributed to this
* project.
diff --git a/common/cmd_boot.c b/common/cmd_boot.c
index e68f16f..182e2ab 100644
--- a/common/cmd_boot.c
+++ b/common/cmd_boot.c
@@ -83,7 +83,7 @@ U_BOOT_CMD(
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
U_BOOT_CMD(
- reset, 1, 0, do_reset,
+ reset, CFG_MAXARGS, 1, do_reset,
"reset - Perform RESET of the CPU\n",
NULL
);
diff --git a/cpu/mpc86xx/Makefile b/cpu/mpc86xx/Makefile
index 0dd099d..ab6255a 100644
--- a/cpu/mpc86xx/Makefile
+++ b/cpu/mpc86xx/Makefile
@@ -3,7 +3,7 @@
# Xianghua Xiao,X.Xiao@motorola.com
#
# (C) Copyright 2004 Freescale Semiconductor. (MC86xx Port)
-# Jeff Brown (Jeffrey@freescale.com)
+# Jeff Brown
# See file CREDITS for list of people who contributed to this
# project.
#
@@ -30,7 +30,7 @@ LIB = lib$(CPU).a
START = start.o #resetvec.o
ASOBJS = cache.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
- pci.o i2c.o spd_sdram.o
+ pci.o i2c.o spd_sdram.o
OBJS = $(COBJS)
all: .depend $(START) $(ASOBJS) $(LIB)
diff --git a/cpu/mpc86xx/cache.S b/cpu/mpc86xx/cache.S
index 75186b1..f316b3e 100644
--- a/cpu/mpc86xx/cache.S
+++ b/cpu/mpc86xx/cache.S
@@ -28,7 +28,7 @@
* Most of this code is taken from 74xx_7xx/cache.S
* and then cleaned up a bit
*/
-
+
/*
* Invalidate L1 instruction cache.
*/
@@ -316,24 +316,30 @@ _GLOBAL(dcache_status)
blr
/*
- * Invalidate L2 cache using L2I and polling L2IP
+ * Invalidate L2 cache using L2I, assume L2 is enabled
*/
_GLOBAL(l2cache_invalidate)
- sync
- oris r3, r3, L2CR_L2I@h
+ mfspr r3, l2cr
+ rlwinm. r3, r3, 0, 0, 0
+ beq 1f
+
+ mfspr r3, l2cr
+ rlwinm r3, r3, 0, 1, 31
+
+#ifdef CONFIG_ALTIVEC
+ dssall
+#endif
sync
mtspr l2cr, r3
sync
+1: mfspr r3, l2cr
+ oris r3, r3, L2CR_L2I@h
+ mtspr l2cr, r3
+
invl2:
mfspr r3, l2cr
- andi. r3, r3, L2CR_L2IP
+ andi. r3, r3, L2CR_L2I@h
bne invl2
- /* turn off the global invalidate bit */
- mfspr r3, l2cr
- rlwinm r3, r3, 0, 11, 9
- sync
- mtspr l2cr, r3
- sync
blr
/*
diff --git a/cpu/mpc86xx/config.mk b/cpu/mpc86xx/config.mk
index 4ef7ace..3c54f4a 100644
--- a/cpu/mpc86xx/config.mk
+++ b/cpu/mpc86xx/config.mk
@@ -1,6 +1,6 @@
#
# (C) Copyright 2004 Freescale Semiconductor.
-# Jeff Brown <jeffrey@freescale.com>
+# Jeff Brown
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -23,4 +23,4 @@
PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi
-PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx -ffixed-r2 -ffixed-r29 -mstring \ No newline at end of file
+PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx -ffixed-r2 -ffixed-r29 -mstring
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
index 36da777..fc77d99 100644
--- a/cpu/mpc86xx/cpu.c
+++ b/cpu/mpc86xx/cpu.c
@@ -1,6 +1,6 @@
/*
- * Copyright 2004 Freescale Semiconductor
- * Jeff Brown (jeffrey@freescale.com)
+ * Copyright 2006 Freescale Semiconductor
+ * Jeff Brown
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -32,29 +32,10 @@
#include <ft_build.h>
#endif
-extern unsigned long get_board_sys_clk(ulong dummy);
-
-
-static __inline__ unsigned long get_dbat3u (void)
-{
- unsigned long dbat3u;
- asm volatile("mfspr %0, 542" : "=r" (dbat3u) :);
- return dbat3u;
-}
-
-static __inline__ unsigned long get_dbat3l (void)
-{
- unsigned long dbat3l;
- asm volatile("mfspr %0, 543" : "=r" (dbat3l) :);
- return dbat3l;
-}
-
-static __inline__ unsigned long get_msr (void)
-{
- unsigned long msr;
- asm volatile("mfmsr %0" : "=r" (msr) :);
- return msr;
-}
+#ifdef CONFIG_MPC8641HPCN
+extern void mpc8641_reset_board(cmd_tbl_t *cmdtp, int flag,
+ int argc, char *argv[]);
+#endif
int checkcpu (void)
@@ -74,8 +55,7 @@ int checkcpu (void)
minor = PVR_MIN(pvr);
puts("CPU:\n");
-
- printf(" Core: ");
+ puts(" Core: ");
switch (ver) {
case PVR_VER(PVR_86xx):
@@ -131,22 +111,19 @@ int checkcpu (void)
printf(" LBC: unknown (lcrr: 0x%08x)\n", lcrr);
}
- printf(" L2: ");
- if (get_l2cr() & 0x80000000)
- printf("Enabled\n");
- else
- printf("Disabled\n");
+ puts(" L2: ");
+ if (get_l2cr() & 0x80000000)
+ puts("Enabled\n");
+ else
+ puts("Disabled\n");
return 0;
}
-/* -------------------------------------------------------------------- */
-
static inline void
soft_restart(unsigned long addr)
{
-
#ifndef CONFIG_MPC8641HPCN
/* SRR0 has system reset vector, SRR1 has default MSR value */
@@ -158,283 +135,25 @@ soft_restart(unsigned long addr)
__asm__ __volatile__ ("rfi");
#else /* CONFIG_MPC8641HPCN */
- out8(PIXIS_BASE+PIXIS_RST,0);
-#endif /* !CONFIG_MPC8641HPCN */
- while(1); /* not reached */
-}
-
-
-
-#ifdef CONFIG_MPC8641HPCN
-
-int set_px_sysclk(ulong sysclk)
-{
- u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux,tmp;
-
- /* Per table 27, page 58 of MPC8641HPCN spec*/
- switch(sysclk)
- {
- case 33:
- sysclk_s = 0x04;
- sysclk_r = 0x04;
- sysclk_v = 0x07;
- sysclk_aux = 0x00;
- break;
- case 40:
- sysclk_s = 0x01;
- sysclk_r = 0x1F;
- sysclk_v = 0x20;
- sysclk_aux = 0x01;
- break;
- case 50:
- sysclk_s = 0x01;
- sysclk_r = 0x1F;
- sysclk_v = 0x2A;
- sysclk_aux = 0x02;
- break;
- case 66:
- sysclk_s = 0x01;
- sysclk_r = 0x04;
- sysclk_v = 0x04;
- sysclk_aux = 0x03;
- break;
- case 83:
- sysclk_s = 0x01;
- sysclk_r = 0x1F;
- sysclk_v = 0x4B;
- sysclk_aux = 0x04;
- break;
- case 100:
- sysclk_s = 0x01;
- sysclk_r = 0x1F;
- sysclk_v = 0x5C;
- sysclk_aux = 0x05;
- break;
- case 134:
- sysclk_s = 0x06;
- sysclk_r = 0x1F;
- sysclk_v = 0x3B;
- sysclk_aux = 0x06;
- break;
- case 166:
- sysclk_s = 0x06;
- sysclk_r = 0x1F;
- sysclk_v = 0x4B;
- sysclk_aux = 0x07;
- break;
- default:
- printf("Unsupported SYSCLK frequency.\n");
- return 0;
- }
-
- vclkh = (sysclk_s << 5) | sysclk_r ;
- vclkl = sysclk_v;
- out8(PIXIS_BASE+PIXIS_VCLKH,vclkh);
- out8(PIXIS_BASE+PIXIS_VCLKL,vclkl);
-
- out8(PIXIS_BASE+PIXIS_AUX,sysclk_aux);
-
- return 1;
-}
-
-int set_px_mpxpll(ulong mpxpll)
-{
- u8 tmp;
- u8 val;
- switch(mpxpll)
- {
- case 2:
- case 4:
- case 6:
- case 8:
- case 10:
- case 12:
- case 14:
- case 16:
- val = (u8)mpxpll;
- break;
- default:
- printf("Unsupported MPXPLL ratio.\n");
- return 0;
- }
-
- tmp = in8(PIXIS_BASE+PIXIS_VSPEED1);
- tmp = (tmp & 0xF0) | (val & 0x0F);
- out8(PIXIS_BASE+PIXIS_VSPEED1,tmp);
-
- return 1;
-}
-int set_px_corepll(ulong corepll)
-{
- u8 tmp;
- u8 val;
-
- switch ((int)corepll) {
- case 20:
- val = 0x08;
- break;
- case 25:
- val = 0x0C;
- break;
- case 30:
- val = 0x10;
- break;
- case 35:
- val = 0x1C;
- break;
- case 40:
- val = 0x14;
- break;
- case 45:
- val = 0x0E;
- break;
- default:
- printf("Unsupported COREPLL ratio.\n");
- return 0;
- }
-
- tmp = in8(PIXIS_BASE+PIXIS_VSPEED0);
- tmp = (tmp & 0xE0) | (val & 0x1F);
- out8(PIXIS_BASE+PIXIS_VSPEED0,tmp);
-
- return 1;
-}
-
-void read_from_px_regs(int set)
-{
- u8 tmp, mask = 0x1C;
- tmp = in8(PIXIS_BASE+PIXIS_VCFGEN0);
- if (set)
- tmp = tmp | mask;
- else
- tmp = tmp & ~mask;
- out8(PIXIS_BASE+PIXIS_VCFGEN0,tmp);
-}
-
-void read_from_px_regs_altbank(int set)
-{
- u8 tmp, mask = 0x04;
- tmp = in8(PIXIS_BASE+PIXIS_VCFGEN1);
- if (set)
- tmp = tmp | mask;
- else
- tmp = tmp & ~mask;
- out8(PIXIS_BASE+PIXIS_VCFGEN1,tmp);
-}
-
-void set_altbank(void)
-{
- u8 tmp;
- tmp = in8(PIXIS_BASE+PIXIS_VBOOT);
- tmp ^= 0x40;
- out8(PIXIS_BASE+PIXIS_VBOOT,tmp);
- }
-
-
-void set_px_go(void)
-{
- u8 tmp;
- tmp = in8(PIXIS_BASE+PIXIS_VCTL);
- tmp = tmp & 0x1E;
- out8(PIXIS_BASE+PIXIS_VCTL,tmp);
- tmp = in8(PIXIS_BASE+PIXIS_VCTL);
- tmp = tmp | 0x01;
- out8(PIXIS_BASE+PIXIS_VCTL,tmp);
-}
+ out8(PIXIS_BASE + PIXIS_RST, 0);
-void set_px_go_with_watchdog(void)
-{
- u8 tmp;
- tmp = in8(PIXIS_BASE+PIXIS_VCTL);
- tmp = tmp & 0x1E;
- out8(PIXIS_BASE+PIXIS_VCTL,tmp);
- tmp = in8(PIXIS_BASE+PIXIS_VCTL);
- tmp = tmp | 0x09;
- out8(PIXIS_BASE+PIXIS_VCTL,tmp);
-}
-
-/* This function takes the non-integral cpu:mpx pll ratio
- * and converts it to an integer that can be used to assign
- * FPGA register values.
- * input: strptr i.e. argv[2]
-*/
-
-ulong strfractoint(uchar *strptr)
-{
- int i,j,retval,intarr_len=0, decarr_len=0, mulconst, no_dec=0;
- ulong intval =0, decval=0;
- uchar intarr[3], decarr[3];
-
- /* Assign the integer part to intarr[]
- * If there is no decimal point i.e.
- * if the ratio is an integral value
- * simply create the intarr.
- */
- i=0;
- while(strptr[i] != 46)
- {
- if(strptr[i] == 0)
- {
- no_dec = 1;
- break; /* Break from loop once the end of string is reached */
- }
-
- intarr[i] = strptr[i];
- i++;
- }
-
- intarr_len = i; /* Assign length of integer part to intarr_len*/
- intarr[i] = '\0'; /* */
-
- if(no_dec)
- {
- mulconst=10; /* Currently needed only for single digit corepll ratios */
- decval = 0;
- }
- else
- {
- j=0;
- i++; /* Skipping the decimal point */
- while ((strptr[i] > 47) && (strptr[i] < 58))
- {
- decarr[j] = strptr[i];
- i++;
- j++;
- }
-
- decarr_len = j;
- decarr[j] = '\0';
-
- mulconst=1;
- for(i=0; i<decarr_len;i++)
- mulconst = mulconst*10;
- decval = simple_strtoul(decarr,NULL,10);
- }
-
- intval = simple_strtoul(intarr,NULL,10);
- intval = intval*mulconst;
-
- retval = intval+decval;
-
- return retval;
+#endif /* !CONFIG_MPC8641HPCN */
+ while(1); /* not reached */
}
-#endif /* CONFIG_MPC8641HPCN */
-
-
-/* no generic way to do board reset. simply call soft_reset. */
+/*
+ * No generic way to do board reset. Simply call soft_reset.
+ */
void
-do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- char cmd;
- ulong addr, val;
- ulong corepll;
+#ifndef CONFIG_MPC8641HPCN
#ifdef CFG_RESET_ADDRESS
- addr = CFG_RESET_ADDRESS;
+ ulong addr = CFG_RESET_ADDRESS;
#else
/*
* note: when CFG_MONITOR_BASE points to a RAM address,
@@ -442,11 +161,9 @@ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
* address. Better pick an address known to be invalid on your
* system and assign it to CFG_RESET_ADDRESS.
*/
- addr = CFG_MONITOR_BASE - sizeof (ulong);
+ ulong addr = CFG_MONITOR_BASE - sizeof(ulong);
#endif
-#ifndef CONFIG_MPC8641HPCN
-
/* flush and disable I/D cache */
__asm__ __volatile__ ("mfspr 3, 1008" ::: "r3");
__asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5");
@@ -460,81 +177,11 @@ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
__asm__ __volatile__ ("isync");
__asm__ __volatile__ ("sync");
- soft_restart(addr);
+ soft_restart(addr);
#else /* CONFIG_MPC8641HPCN */
- if (argc > 1) {
- cmd = argv[1][1];
- switch(cmd) {
- case 'f': /* reset with frequency changed */
- if (argc < 5)
- goto my_usage;
- read_from_px_regs(0);
-
- val = set_px_sysclk(simple_strtoul(argv[2],NULL,10));
-
- corepll = strfractoint(argv[3]);
- val = val + set_px_corepll(corepll);
- val = val + set_px_mpxpll(simple_strtoul(argv[4],
- NULL, 10));
- if (val == 3) {
- printf("Setting registers VCFGEN0 and VCTL\n");
- read_from_px_regs(1);
- printf("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
- set_px_go();
- } else
- goto my_usage;
-
- while (1); /* Not reached */
-
- case 'l':
- if (argv[2][1] == 'f') {
- read_from_px_regs(0);
- read_from_px_regs_altbank(0);
- /* reset with frequency changed */
- val = set_px_sysclk(simple_strtoul(argv[3],NULL,10));
-
- corepll = strfractoint(argv[4]);
- val = val + set_px_corepll(corepll);
- val = val + set_px_mpxpll(simple_strtoul(argv[5],NULL,10));
- if (val == 3) {
- printf("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
- set_altbank();
- read_from_px_regs(1);
- read_from_px_regs_altbank(1);
- printf("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
- set_px_go_with_watchdog();
- } else
- goto my_usage;
-
- while(1); /* Not reached */
- } else {
- /* Reset from next bank without changing frequencies */
- read_from_px_regs(0);
- read_from_px_regs_altbank(0);
- if(argc > 2)
- goto my_usage;
- printf("Setting registers VCFGEN1, VBOOT, and VCTL\n");
- set_altbank();
- read_from_px_regs_altbank(1);
- printf("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
- set_px_go_with_watchdog();
- while(1); /* Not reached */
- }
-
- default:
- goto my_usage;
- }
-
-my_usage:
- printf("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
- printf(" reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
- printf("For example: reset cf 40 2.5 10\n");
- printf("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
- return;
- } else
- out8(PIXIS_BASE+PIXIS_RST,0);
+ mpc8641_reset_board(cmdtp, flag, argc, argv);
#endif /* !CONFIG_MPC8641HPCN */
@@ -571,7 +218,6 @@ void dma_init(void)
dma->satr0 = 0x00040000;
dma->datr0 = 0x00040000;
asm("sync; isync");
- return;
}
uint dma_check(void)
diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c
index c816c18..93b7338 100644
--- a/cpu/mpc86xx/cpu_init.c
+++ b/cpu/mpc86xx/cpu_init.c
@@ -1,6 +1,6 @@
/*
* Copyright 2004 Freescale Semiconductor.
- * Jeff Brown (jeffrey@freescale.com)
+ * Jeff Brown
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -106,15 +106,6 @@ void cpu_init_f(void)
/* enable SYNCBE | ABE bits in HID1 */
set_hid1(get_hid1() | 0x00000C00);
-
- /* Since the bats have been set up at this point and
- * the local bus registers have been initialized, we
- * turn on the WDEN bit in PIXIS_VCTL
- */
-/* val = in8(PIXIS_BASE+PIXIS_VCTL); */
- /* Set the WDEN */
-/* val |= 0x08; */
-/* out8(PIXIS_BASE+PIXIS_VCTL,val); */
}
/*
diff --git a/cpu/mpc86xx/i2c.c b/cpu/mpc86xx/i2c.c
index f2b4b0f..b3ac848 100644
--- a/cpu/mpc86xx/i2c.c
+++ b/cpu/mpc86xx/i2c.c
@@ -7,7 +7,7 @@
* Gleb Natapov <gnatapov@mrv.com>
* Some bits are taken from linux driver writen by adrian@humboldt.co.uk
*
- * Modified for MPC86xx by Jeff Brown (jeffrey@freescale.com)
+ * Modified for MPC86xx by Jeff Brown
*
* Hardware I2C driver for MPC107 PCI bridge.
*
@@ -207,7 +207,7 @@ i2c_read (u8 dev, uint addr, int alen, u8 *data, int length)
i = __i2c_read(data, length);
- exit:
+exit:
writeb(MPC86xx_I2CCR_MEN, I2CCCR);
return !(i == length);
@@ -230,7 +230,7 @@ i2c_write (u8 dev, uint addr, int alen, u8 *data, int length)
i = __i2c_write(data, length);
- exit:
+exit:
writeb(MPC86xx_I2CCR_MEN, I2CCCR);
return !(i == length);
diff --git a/cpu/mpc86xx/interrupts.c b/cpu/mpc86xx/interrupts.c
index b5cd439..a8bcb98 100644
--- a/cpu/mpc86xx/interrupts.c
+++ b/cpu/mpc86xx/interrupts.c
@@ -9,7 +9,7 @@
* Xianghua Xiao (X.Xiao@motorola.com)
*
* (C) Copyright 2004 Freescale Semiconductor. (MPC86xx Port)
- * Jeff Brown (Jeffrey@freescale.com)
+ * Jeff Brown
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -37,11 +37,10 @@
#include <asm/processor.h>
#include <ppc_asm.tmpl>
-unsigned long decrementer_count; /* count value for 1e6/HZ microseconds */
-
-
+unsigned long decrementer_count; /* count value for 1e6/HZ microseconds */
unsigned long timestamp;
+
static __inline__ unsigned long get_msr (void)
{
unsigned long msr;
@@ -75,7 +74,7 @@ static __inline__ void set_dec (unsigned long val)
/* interrupt is not supported yet */
int interrupt_init_cpu (unsigned *decrementer_count)
{
- return 0;
+ return 0;
}
@@ -89,14 +88,14 @@ int interrupt_init (void)
if (ret)
return ret;
- decrementer_count = get_tbclk()/CFG_HZ;
- debug("interrupt init: tbclk() = %d MHz, decrementer_count = %d\n", (get_tbclk()/1000000), decrementer_count);
+ decrementer_count = get_tbclk()/CFG_HZ;
+ debug("interrupt init: tbclk() = %d MHz, decrementer_count = %d\n", (get_tbclk()/1000000), decrementer_count);
- set_dec (decrementer_count);
+ set_dec (decrementer_count);
set_msr (get_msr () | MSR_EE);
- debug("MSR = 0x%08lx, Decrementer reg = 0x%08lx\n", get_msr(), get_dec());
+ debug("MSR = 0x%08lx, Decrementer reg = 0x%08lx\n", get_msr(), get_dec());
return 0;
}
@@ -119,7 +118,7 @@ int disable_interrupts (void)
void increment_timestamp(void)
{
- timestamp++;
+ timestamp++;
}
/*
@@ -136,15 +135,15 @@ timer_interrupt_cpu (struct pt_regs *regs)
void timer_interrupt (struct pt_regs *regs)
{
- /* call cpu specific function from $(CPU)/interrupts.c */
- timer_interrupt_cpu (regs);
+ /* call cpu specific function from $(CPU)/interrupts.c */
+ timer_interrupt_cpu (regs);
- timestamp++;
+ timestamp++;
- ppcDcbf(&timestamp);
+ ppcDcbf(&timestamp);
- /* Restore Decrementer Count */
- set_dec (decrementer_count);
+ /* Restore Decrementer Count */
+ set_dec (decrementer_count);
#if defined(CONFIG_WATCHDOG) || defined (CONFIG_HW_WATCHDOG)
if ((timestamp % (CFG_WATCHDOG_FREQ)) == 0)
@@ -164,17 +163,17 @@ void timer_interrupt (struct pt_regs *regs)
void reset_timer (void)
{
- timestamp = 0;
+ timestamp = 0;
}
ulong get_timer (ulong base)
{
- return timestamp - base;
+ return timestamp - base;
}
void set_timer (ulong t)
{
- timestamp = t;
+ timestamp = t;
}
/*
@@ -192,11 +191,8 @@ irq_free_handler(int vec)
}
-
-/*******************************************************************************
- *
+/*
* irqinfo - print information about PCI devices,not implemented.
- *
*/
int
do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c
index 9ce31d7..f30bbbd 100644
--- a/cpu/mpc86xx/spd_sdram.c
+++ b/cpu/mpc86xx/spd_sdram.c
@@ -42,6 +42,15 @@ extern int dma_xfer(void *dest, uint count, void *src);
#endif
/*
+ * Only one of the following three should be 1; others should be 0
+ * By default the cache line interleaving is selected if
+ * the CONFIG_DDR_INTERLEAVE flag is defined in MPC8641HPCN.h
+ */
+#define CFG_PAGE_INTERLEAVING 0
+#define CFG_BANK_INTERLEAVING 0
+#define CFG_SUPER_BANK_INTERLEAVING 0
+
+/*
* Convert picoseconds into clock cycles (rounding up if needed).
*/
@@ -144,10 +153,11 @@ convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
long int
-spd_sdram(void)
+spd_init(unsigned char i2c_address, unsigned int ddr_num,
+ unsigned int dimm_num, unsigned int start_addr)
{
volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1;
+ volatile ccsr_ddr_t *ddr;
volatile ccsr_gur_t *gur = &immap->im_gur;
spd_eeprom_t spd;
unsigned int n_ranks;
@@ -175,28 +185,41 @@ spd_sdram(void)
unsigned int mode_caslat;
unsigned char sdram_type;
unsigned char d_init;
+ unsigned int law_size;
+ volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
-
- unsigned int law_size;
- volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
+ if (ddr_num == 1)
+ ddr = &immap->im_ddr1;
+ else
+ ddr = &immap->im_ddr2;
/*
* Read SPD information.
*/
- CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) &spd, sizeof(spd));
+ debug("Performing SPD read at I2C address 0x%02lx\n",i2c_address);
+ memset((void *)&spd, 0, sizeof(spd));
+ CFG_READ_SPD(i2c_address, 0, 1, (uchar *) &spd, sizeof(spd));
/*
* Check for supported memory module types.
*/
if (spd.mem_type != SPD_MEMTYPE_DDR &&
spd.mem_type != SPD_MEMTYPE_DDR2) {
- printf("Unable to locate DDR I or DDR II module.\n"
- " Fundamental memory type is 0x%0x\n",
- spd.mem_type);
+ debug("Warning: Unable to locate DDR I or DDR II module for DIMM %d of DDR controller %d.\n"
+ " Fundamental memory type is 0x%0x\n",
+ dimm_num,
+ ddr_num,
+ spd.mem_type);
return 0;
}
+ debug("\nFound memory of type 0x%02lx ", spd.mem_type);
+ if (spd.mem_type == SPD_MEMTYPE_DDR)
+ debug("DDR I\n");
+ else
+ debug("DDR II\n");
+
/*
* These test gloss over DDR I and II differences in interpretation
* of bytes 3 and 4, but irrelevantly. Multiple asymmetric banks
@@ -253,11 +276,7 @@ spd_sdram(void)
*/
rank_density = compute_banksize(spd.mem_type, spd.row_dens);
-
- /*
- * Eg: Bounds: 0x0000_0000 to 0x0f000_0000 first 256 Meg
- */
- ddr1->cs0_bnds = (rank_density >> 24) - 1;
+ debug("Start address for this controller is 0x%08lx\n", start_addr);
/*
* ODT configuration recommendation from DDR Controller Chapter.
@@ -268,30 +287,133 @@ spd_sdram(void)
odt_wr_cfg = 1; /* Assert ODT on writes to CS0 */
}
- ddr1->cs0_config = ( 1 << 31
- | (odt_rd_cfg << 20)
- | (odt_wr_cfg << 16)
- | (spd.nrow_addr - 12) << 8
- | (spd.ncol_addr - 8) );
- debug("\n");
- debug("DDR: cs0_bnds = 0x%08x\n", ddr1->cs0_bnds);
- debug("DDR: cs0_config = 0x%08x\n", ddr1->cs0_config);
+#ifdef CONFIG_DDR_INTERLEAVE
+#ifdef CONFIG_MPC8641HPCN
+ if (dimm_num != 1) {
+ printf("For interleaving memory on HPCN, need to use DIMM 1 for DDR Controller %d !\n", ddr_num);
+ return 0;
+ } else {
+ /*
+ * Since interleaved memory only uses CS0, the
+ * memory sticks have to be identical in size and quantity
+ * of ranks. That essentially gives double the size on
+ * one rank, i.e on CS0 for both controllers put together.
+ * Confirm this???
+ */
+ rank_density *= 2;
- if (n_ranks == 2) {
/*
- * Eg: Bounds: 0x0f00_0000 to 0x1e0000_0000, second 256 Meg
+ * Eg: Bounds: 0x0000_0000 to 0x0f000_0000 first 256 Meg
+ */
+ start_addr = 0;
+ ddr->cs0_bnds = (start_addr >> 8)
+ | (((start_addr + rank_density - 1) >> 24));
+ /*
+ * Default interleaving mode to cache-line interleaving.
*/
- ddr1->cs1_bnds = ( (rank_density >> 8)
- | ((rank_density >> (24 - 1)) - 1) );
- ddr1->cs1_config = ( 1<<31
+ ddr->cs0_config = ( 1 << 31
+#if (CFG_PAGE_INTERLEAVING == 1)
+ | (PAGE_INTERLEAVING)
+#elif (CFG_BANK_INTERLEAVING == 1)
+ | (BANK_INTERLEAVING)
+#elif (CFG_SUPER_BANK_INTERLEAVING == 1)
+ | (SUPER_BANK_INTERLEAVING)
+#else
+ | (CACHE_LINE_INTERLEAVING)
+#endif
| (odt_rd_cfg << 20)
| (odt_wr_cfg << 16)
| (spd.nrow_addr - 12) << 8
| (spd.ncol_addr - 8) );
- debug("DDR: cs1_bnds = 0x%08x\n", ddr1->cs1_bnds);
- debug("DDR: cs1_config = 0x%08x\n", ddr1->cs1_config);
+
+ debug("DDR: cs0_bnds = 0x%08x\n", ddr->cs0_bnds);
+ debug("DDR: cs0_config = 0x%08x\n", ddr->cs0_config);
+
+ /*
+ * Adjustment for dual rank memory to get correct memory
+ * size (return value of this function).
+ */
+ if (n_ranks == 2) {
+ n_ranks = 1;
+ rank_density /= 2;
+ } else {
+ rank_density /= 2;
+ }
}
+#endif /* CONFIG_MPC8641HPCN */
+
+#else /* CONFIG_DDR_INTERLEAVE */
+
+ if (dimm_num == 1) {
+ /*
+ * Eg: Bounds: 0x0000_0000 to 0x0f000_0000 first 256 Meg
+ */
+ ddr->cs0_bnds = (start_addr >> 8)
+ | (((start_addr + rank_density - 1) >> 24));
+
+ ddr->cs0_config = ( 1 << 31
+ | (odt_rd_cfg << 20)
+ | (odt_wr_cfg << 16)
+ | (spd.nrow_addr - 12) << 8
+ | (spd.ncol_addr - 8) );
+
+ debug("DDR: cs0_bnds = 0x%08x\n", ddr->cs0_bnds);
+ debug("DDR: cs0_config = 0x%08x\n", ddr->cs0_config);
+
+ if (n_ranks == 2) {
+ /*
+ * Eg: Bounds: 0x1000_0000 to 0x1f00_0000,
+ * second 256 Meg
+ */
+ ddr->cs1_bnds = (((start_addr + rank_density) >> 8)
+ | (( start_addr + 2*rank_density - 1)
+ >> 24));
+ ddr->cs1_config = ( 1<<31
+ | (odt_rd_cfg << 20)
+ | (odt_wr_cfg << 16)
+ | (spd.nrow_addr - 12) << 8
+ | (spd.ncol_addr - 8) );
+ debug("DDR: cs1_bnds = 0x%08x\n", ddr->cs1_bnds);
+ debug("DDR: cs1_config = 0x%08x\n", ddr->cs1_config);
+ }
+
+ } else {
+ /*
+ * This is the 2nd DIMM slot for this controller
+ */
+ /*
+ * Eg: Bounds: 0x0000_0000 to 0x0f000_0000 first 256 Meg
+ */
+ ddr->cs2_bnds = (start_addr >> 8)
+ | (((start_addr + rank_density - 1) >> 24));
+ ddr->cs2_config = ( 1 << 31
+ | (odt_rd_cfg << 20)
+ | (odt_wr_cfg << 16)
+ | (spd.nrow_addr - 12) << 8
+ | (spd.ncol_addr - 8) );
+
+ debug("DDR: cs2_bnds = 0x%08x\n", ddr->cs2_bnds);
+ debug("DDR: cs2_config = 0x%08x\n", ddr->cs2_config);
+
+ if (n_ranks == 2) {
+ /*
+ * Eg: Bounds: 0x1000_0000 to 0x1f00_0000,
+ * second 256 Meg
+ */
+ ddr->cs3_bnds = (((start_addr + rank_density) >> 8)
+ | (( start_addr + 2*rank_density - 1)
+ >> 24));
+ ddr->cs3_config = ( 1<<31
+ | (odt_rd_cfg << 20)
+ | (odt_wr_cfg << 16)
+ | (spd.nrow_addr - 12) << 8
+ | (spd.ncol_addr - 8) );
+ debug("DDR: cs3_bnds = 0x%08x\n", ddr->cs3_bnds);
+ debug("DDR: cs3_config = 0x%08x\n", ddr->cs3_config);
+ }
+ }
+#endif /* CONFIG_DDR_INTERLEAVE */
/*
* Find the largest CAS by locating the highest 1 bit
@@ -447,15 +569,14 @@ spd_sdram(void)
unsigned char act_pd_exit = 2; /* Empirical? */
unsigned char pre_pd_exit = 6; /* Empirical? */
- ddr1->timing_cfg_0 = (0
+ ddr->timing_cfg_0 = (0
| ((act_pd_exit & 0x7) << 20) /* ACT_PD_EXIT */
| ((pre_pd_exit & 0x7) << 16) /* PRE_PD_EXIT */
| ((taxpd_clk & 0xf) << 8) /* ODT_PD_EXIT */
| ((tmrd_clk & 0xf) << 0) /* MRS_CYC */
);
- debug("DDR: timing_cfg_0 = 0x%08x\n", ddr1->timing_cfg_0);
+ debug("DDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
- } else {
}
@@ -520,10 +641,10 @@ spd_sdram(void)
/*
* Sneak in some Extended Refresh Recovery.
*/
- ddr1->ext_refrec = (trfc_high << 16);
- debug("DDR: ext_refrec = 0x%08x\n", ddr1->ext_refrec);
+ ddr->ext_refrec = (trfc_high << 16);
+ debug("DDR: ext_refrec = 0x%08x\n", ddr->ext_refrec);
- ddr1->timing_cfg_1 =
+ ddr->timing_cfg_1 =
(0
| ((picos_to_clk(spd.trp * 250) & 0x07) << 28) /* PRETOACT */
| ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24) /* ACTTOPRE */
@@ -535,7 +656,7 @@ spd_sdram(void)
| ((twtr_clk & 0x07) << 0) /* WRTORD */
);
- debug("DDR: timing_cfg_1 = 0x%08x\n", ddr1->timing_cfg_1);
+ debug("DDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
/*
@@ -612,7 +733,7 @@ spd_sdram(void)
}
}
- ddr1->timing_cfg_2 = (0
+ ddr->timing_cfg_2 = (0
| ((add_lat & 0x7) << 28) /* ADD_LAT */
| ((cpo & 0x1f) << 23) /* CPO */
| ((wr_lat & 0x7) << 19) /* WR_LAT */
@@ -622,7 +743,7 @@ spd_sdram(void)
| ((four_act & 0x1f) << 0) /* FOUR_ACT */
);
- debug("DDR: timing_cfg_2 = 0x%08x\n", ddr1->timing_cfg_2);
+ debug("DDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2);
/*
@@ -673,7 +794,7 @@ spd_sdram(void)
}
/*
- * Encoded Burst Lenght of 4.
+ * Encoded Burst Length of 4.
*/
burst_len = 2; /* Fiat. */
@@ -706,7 +827,7 @@ spd_sdram(void)
mode_odt_enable = 0x40; /* 150 Ohm */
}
- ddr1->sdram_mode_1 =
+ ddr->sdram_mode_1 =
(0
| (add_lat << (16 + 3)) /* Additive Latency in EMRS1 */
| (mode_odt_enable << 16) /* ODT Enable in EMRS1 */
@@ -715,14 +836,14 @@ spd_sdram(void)
| (burst_len << 0) /* Burst length */
);
- debug("DDR: sdram_mode = 0x%08x\n", ddr1->sdram_mode_1);
+ debug("DDR: sdram_mode = 0x%08x\n", ddr->sdram_mode_1);
/*
* Clear EMRS2 and EMRS3.
*/
- ddr1->sdram_mode_2 = 0;
- debug("DDR: sdram_mode_2 = 0x%08x\n", ddr1->sdram_mode_2);
+ ddr->sdram_mode_2 = 0;
+ debug("DDR: sdram_mode_2 = 0x%08x\n", ddr->sdram_mode_2);
/*
@@ -749,12 +870,12 @@ spd_sdram(void)
* Set BSTOPRE to 0x100 for page mode
* If auto-charge is used, set BSTOPRE = 0
*/
- ddr1->sdram_interval =
+ ddr->sdram_interval =
(0
| (refresh_clk & 0x3fff) << 16
| 0x100
);
- debug("DDR: sdram_interval = 0x%08x\n", ddr1->sdram_interval);
+ debug("DDR: sdram_interval = 0x%08x\n", ddr->sdram_interval);
}
/*
@@ -763,11 +884,11 @@ spd_sdram(void)
*/
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
if (spd.config == 0x02) {
- ddr1->err_disable = 0x0000000d;
- ddr1->err_sbe = 0x00ff0000;
+ ddr->err_disable = 0x0000000d;
+ ddr->err_sbe = 0x00ff0000;
}
- debug("DDR: err_disable = 0x%08x\n", ddr1->err_disable);
- debug("DDR: err_sbe = 0x%08x\n", ddr1->err_sbe);
+ debug("DDR: err_disable = 0x%08x\n", ddr->err_disable);
+ debug("DDR: err_sbe = 0x%08x\n", ddr->err_sbe);
#endif
asm("sync;isync");
@@ -800,8 +921,8 @@ spd_sdram(void)
* Use the DDR controller to auto initialize memory.
*/
d_init = 1;
- ddr1->sdram_data_init = CONFIG_MEM_INIT_VALUE;
- debug("DDR: ddr_data_init = 0x%08x\n", ddr1->sdram_data_init);
+ ddr->sdram_data_init = CONFIG_MEM_INIT_VALUE;
+ debug("DDR: ddr_data_init = 0x%08x\n", ddr->sdram_data_init);
#else
/*
* Memory will be initialized via DMA, or not at all.
@@ -809,13 +930,13 @@ spd_sdram(void)
d_init = 0;
#endif
- ddr1->sdram_cfg_2 = (0
+ ddr->sdram_cfg_2 = (0
| (dqs_cfg << 26) /* Differential DQS */
| (odt_cfg << 21) /* ODT */
| (d_init << 4) /* D_INIT auto init DDR */
);
- debug("DDR: sdram_cfg_2 = 0x%08x\n", ddr1->sdram_cfg_2);
+ debug("DDR: sdram_cfg_2 = 0x%08x\n", ddr->sdram_cfg_2);
#ifdef MPC86xx_DDR_SDRAM_CLK_CNTL
@@ -835,121 +956,373 @@ spd_sdram(void)
clk_adjust = 0x7;
}
- ddr1->sdram_clk_cntl = (0
+ ddr->sdram_clk_cntl = (0
| 0x80000000
| (clk_adjust << 23)
);
- debug("DDR: sdram_clk_cntl = 0x%08x\n", ddr1->sdram_clk_cntl);
+ debug("DDR: sdram_clk_cntl = 0x%08x\n", ddr->sdram_clk_cntl);
}
#endif
+
/*
- * Figure out the settings for the sdram_cfg register.
- * Build up the entire register in 'sdram_cfg' before writing
- * since the write into the register will actually enable the
- * memory controller; all settings must be done before enabling.
- *
- * sdram_cfg[0] = 1 (ddr sdram logic enable)
- * sdram_cfg[1] = 1 (self-refresh-enable)
- * sdram_cfg[5:7] = (SDRAM type = DDR SDRAM)
- * 010 DDR 1 SDRAM
- * 011 DDR 2 SDRAM
+ * Figure out memory size in Megabytes.
*/
- sdram_type = (spd.mem_type == SPD_MEMTYPE_DDR) ? 2 : 3;
- sdram_cfg_1 = (0
- | (1 << 31) /* Enable */
- | (1 << 30) /* Self refresh */
- | (sdram_type << 24) /* SDRAM type */
- );
+ debug("# ranks = %d, rank_density = 0x%08lx\n", n_ranks, rank_density);
+ memsize = n_ranks * rank_density / 0x100000;
+ return memsize;
+}
+
+
+unsigned int enable_ddr(unsigned int ddr_num)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ spd_eeprom_t spd1,spd2;
+ volatile ccsr_ddr_t *ddr;
+ unsigned sdram_cfg_1;
+ unsigned char sdram_type, mem_type, config, mod_attr;
+ unsigned char d_init;
+ unsigned int no_dimm1=0, no_dimm2=0;
+
+ /* Set up pointer to enable the current ddr controller */
+ if (ddr_num == 1)
+ ddr = &immap->im_ddr1;
+ else
+ ddr = &immap->im_ddr2;
/*
- * sdram_cfg[3] = RD_EN - registered DIMM enable
- * A value of 0x26 indicates micron registered DIMMS (micron.com)
+ * Read both dimm slots and decide whether
+ * or not to enable this controller.
*/
- if (spd.mem_type == SPD_MEMTYPE_DDR && spd.mod_attr == 0x26) {
- sdram_cfg_1 |= 0x10000000; /* RD_EN */
+ memset((void *)&spd1,0,sizeof(spd1));
+ memset((void *)&spd2,0,sizeof(spd2));
+
+ if (ddr_num == 1) {
+ CFG_READ_SPD(SPD_EEPROM_ADDRESS1,
+ 0, 1, (uchar *) &spd1, sizeof(spd1));
+ CFG_READ_SPD(SPD_EEPROM_ADDRESS2,
+ 0, 1, (uchar *) &spd2, sizeof(spd2));
+ } else {
+ CFG_READ_SPD(SPD_EEPROM_ADDRESS3,
+ 0, 1, (uchar *) &spd1, sizeof(spd1));
+ CFG_READ_SPD(SPD_EEPROM_ADDRESS4,
+ 0, 1, (uchar *) &spd2, sizeof(spd2));
}
-#if defined(CONFIG_DDR_ECC)
/*
- * If the user wanted ECC (enabled via sdram_cfg[2])
+ * Check for supported memory module types.
*/
- if (spd.config == 0x02) {
- sdram_cfg_1 |= 0x20000000; /* ECC_EN */
+ if (spd1.mem_type != SPD_MEMTYPE_DDR
+ && spd1.mem_type != SPD_MEMTYPE_DDR2) {
+ no_dimm1 = 1;
+ } else {
+ debug("\nFound memory of type 0x%02lx ",spd1.mem_type );
+ if (spd1.mem_type == SPD_MEMTYPE_DDR)
+ debug("DDR I\n");
+ else
+ debug("DDR II\n");
+ }
+
+ if (spd2.mem_type != SPD_MEMTYPE_DDR &&
+ spd2.mem_type != SPD_MEMTYPE_DDR2) {
+ no_dimm2 = 1;
+ } else {
+ debug("\nFound memory of type 0x%02lx ",spd2.mem_type );
+ if (spd2.mem_type == SPD_MEMTYPE_DDR)
+ debug("DDR I\n");
+ else
+ debug("DDR II\n");
+ }
+
+#ifdef CONFIG_DDR_INTERLEAVE
+ if (no_dimm1) {
+ printf("For interleaved operation memory modules need to be present in CS0 DIMM slots of both DDR controllers!\n");
+ return 0;
}
#endif
/*
- * REV1 uses 1T timing.
- * REV2 may use 1T or 2T as configured by the user.
+ * Memory is not present in DIMM1 and DIMM2 - so do not enable DDRn
*/
- {
- uint pvr = get_pvr();
+ if (no_dimm1 && no_dimm2) {
+ printf("No memory modules found for DDR controller %d!!\n", ddr_num);
+ return 0;
+ } else {
+ mem_type = no_dimm2 ? spd1.mem_type : spd2.mem_type;
- if (pvr != PVR_85xx_REV1) {
-#if defined(CONFIG_DDR_2T_TIMING)
- /*
- * Enable 2T timing by setting sdram_cfg[16].
- */
- sdram_cfg_1 |= 0x8000; /* 2T_EN */
+ /*
+ * Figure out the settings for the sdram_cfg register.
+ * Build up the entire register in 'sdram_cfg' before
+ * writing since the write into the register will
+ * actually enable the memory controller; all settings
+ * must be done before enabling.
+ *
+ * sdram_cfg[0] = 1 (ddr sdram logic enable)
+ * sdram_cfg[1] = 1 (self-refresh-enable)
+ * sdram_cfg[5:7] = (SDRAM type = DDR SDRAM)
+ * 010 DDR 1 SDRAM
+ * 011 DDR 2 SDRAM
+ */
+ sdram_type = (mem_type == SPD_MEMTYPE_DDR) ? 2 : 3;
+ sdram_cfg_1 = (0
+ | (1 << 31) /* Enable */
+ | (1 << 30) /* Self refresh */
+ | (sdram_type << 24) /* SDRAM type */
+ );
+
+ /*
+ * sdram_cfg[3] = RD_EN - registered DIMM enable
+ * A value of 0x26 indicates micron registered
+ * DIMMS (micron.com)
+ */
+ mod_attr = no_dimm2 ? spd1.mod_attr : spd2.mod_attr;
+ if (mem_type == SPD_MEMTYPE_DDR && mod_attr == 0x26) {
+ sdram_cfg_1 |= 0x10000000; /* RD_EN */
+ }
+
+#if defined(CONFIG_DDR_ECC)
+
+ config = no_dimm2 ? spd1.config : spd2.config;
+
+ /*
+ * If the user wanted ECC (enabled via sdram_cfg[2])
+ */
+ if (config == 0x02) {
+ ddr->err_disable = 0x00000000;
+ asm("sync;isync;");
+ ddr->err_sbe = 0x00ff0000;
+ ddr->err_int_en = 0x0000000d;
+ sdram_cfg_1 |= 0x20000000; /* ECC_EN */
+ }
#endif
+
+ /*
+ * Set 1T or 2T timing based on 1 or 2 modules
+ */
+ {
+ if (!(no_dimm1 || no_dimm2)) {
+ /*
+ * 2T timing,because both DIMMS are present.
+ * Enable 2T timing by setting sdram_cfg[16].
+ */
+ sdram_cfg_1 |= 0x8000; /* 2T_EN */
+ }
}
- }
- /*
- * 200 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- */
- udelay(200);
+ /*
+ * 200 painful micro-seconds must elapse between
+ * the DDR clock setup and the DDR config enable.
+ */
+ udelay(200);
- /*
- * Go!
- */
- ddr1->sdram_cfg_1 = sdram_cfg_1;
+ /*
+ * Go!
+ */
+ ddr->sdram_cfg_1 = sdram_cfg_1;
- asm("sync;isync");
- udelay(500);
+ asm volatile("sync;isync");
+ udelay(500);
- debug("DDR: sdram_cfg = 0x%08x\n", ddr1->sdram_cfg_1);
+ debug("DDR: sdram_cfg = 0x%08x\n", ddr->sdram_cfg_1);
#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- debug("DDR: memory initializing\n");
- /*
- * Poll until memory is initialized.
- * 512 Meg at 400 might hit this 200 times or so.
- */
- while ((ddr1->sdram_cfg_2 & (d_init << 4)) != 0) {
- udelay(1000);
+ d_init = 1;
+ debug("DDR: memory initializing\n");
+
+ /*
+ * Poll until memory is initialized.
+ * 512 Meg at 400 might hit this 200 times or so.
+ */
+ while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
+ udelay(1000);
+ }
+ debug("DDR: memory initialized\n\n");
+#endif
+
+ debug("Enabled DDR Controller %d\n", ddr_num);
+ return 1;
}
- debug("DDR: memory initialized\n");
+}
+
+
+long int
+spd_sdram(void)
+{
+ int memsize_ddr1_dimm1 = 0;
+ int memsize_ddr1_dimm2 = 0;
+ int memsize_ddr2_dimm1 = 0;
+ int memsize_ddr2_dimm2 = 0;
+ int memsize_total = 0;
+ int memsize_ddr1 = 0;
+ int memsize_ddr2 = 0;
+ unsigned int ddr1_enabled = 0;
+ unsigned int ddr2_enabled = 0;
+ unsigned int law_size_ddr1;
+ unsigned int law_size_ddr2;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1;
+ volatile ccsr_ddr_t *ddr2 = &immap->im_ddr2;
+ volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
+
+#ifdef CONFIG_DDR_INTERLEAVE
+ unsigned int law_size_interleaved;
+
+ memsize_ddr1_dimm1 = spd_init(SPD_EEPROM_ADDRESS1,
+ 1, 1,
+ (unsigned int)memsize_total * 1024*1024);
+ memsize_total += memsize_ddr1_dimm1;
+
+ memsize_ddr2_dimm1 = spd_init(SPD_EEPROM_ADDRESS3,
+ 2, 1,
+ (unsigned int)memsize_total * 1024*1024);
+ memsize_total += memsize_ddr2_dimm1;
+
+ if (memsize_ddr1_dimm1 != memsize_ddr2_dimm1) {
+ if (memsize_ddr1_dimm1 < memsize_ddr2_dimm1)
+ memsize_total -= memsize_ddr1_dimm1;
+ else
+ memsize_total -= memsize_ddr2_dimm1;
+ debug("Total memory available for interleaving 0x%08lx\n",
+ memsize_total * 1024 * 1024);
+ debug("Adjusting CS0_BNDS to account for unequal DIMM sizes in interleaved memory\n");
+ ddr1->cs0_bnds = ((memsize_total * 1024 * 1024) - 1) >> 24;
+ ddr2->cs0_bnds = ((memsize_total * 1024 * 1024) - 1) >> 24;
+ debug("DDR1: cs0_bnds = 0x%08x\n", ddr1->cs0_bnds);
+ debug("DDR2: cs0_bnds = 0x%08x\n", ddr2->cs0_bnds);
+ }
+
+ ddr1_enabled = enable_ddr(1);
+ ddr2_enabled = enable_ddr(2);
+
+ /*
+ * Both controllers need to be enabled for interleaving.
+ */
+ if (ddr1_enabled && ddr2_enabled) {
+ law_size_interleaved = 19 + __ilog2(memsize_total);
+
+ /*
+ * Set up LAWBAR for DDR 1 space.
+ */
+ mcm->lawbar1 = ((CFG_DDR_SDRAM_BASE >> 12) & 0xfffff);
+ mcm->lawar1 = (LAWAR_EN
+ | LAWAR_TRGT_IF_DDR_INTERLEAVED
+ | (LAWAR_SIZE & law_size_interleaved));
+ debug("DDR: LAWBAR1=0x%08x\n", mcm->lawbar1);
+ debug("DDR: LAWAR1=0x%08x\n", mcm->lawar1);
+ debug("Interleaved memory size is 0x%08lx\n", memsize_total);
+
+#ifdef CONFIG_DDR_INTERLEAVE
+#if (CFG_PAGE_INTERLEAVING == 1)
+ printf("Page ");
+#elif (CFG_BANK_INTERLEAVING == 1)
+ printf("Bank ");
+#elif (CFG_SUPER_BANK_INTERLEAVING == 1)
+ printf("Super-bank ");
+#else
+ printf("Cache-line ");
#endif
+#endif
+ printf("Interleaved");
+ return memsize_total * 1024 * 1024;
+ } else {
+ printf("Interleaved memory not enabled - check CS0 DIMM slots for both controllers.\n");
+ return 0;
+ }
+
+#else
+ /*
+ * Call spd_sdram() routine to init ddr1 - pass I2c address,
+ * controller number, dimm number, and starting address.
+ */
+ memsize_ddr1_dimm1 = spd_init(SPD_EEPROM_ADDRESS1,
+ 1, 1,
+ (unsigned int)memsize_total * 1024*1024);
+ memsize_total += memsize_ddr1_dimm1;
+ memsize_ddr1_dimm2 = spd_init(SPD_EEPROM_ADDRESS2,
+ 1, 2,
+ (unsigned int)memsize_total * 1024*1024);
+ memsize_total += memsize_ddr1_dimm2;
/*
- * Figure out memory size in Megabytes.
+ * Enable the DDR controller - pass ddr controller number.
*/
- memsize = n_ranks * rank_density / 0x100000;
+ ddr1_enabled = enable_ddr(1);
+ /* Keep track of memory to be addressed by DDR1 */
+ memsize_ddr1 = memsize_ddr1_dimm1 + memsize_ddr1_dimm2;
- /*
+ /*
* First supported LAW size is 16M, at LAWAR_SIZE_16M == 23. Fnord.
*/
- law_size = 19 + __ilog2(memsize);
+ if (ddr1_enabled) {
+ law_size_ddr1 = 19 + __ilog2(memsize_ddr1);
+
+ /*
+ * Set up LAWBAR for DDR 1 space.
+ */
+ mcm->lawbar1 = ((CFG_DDR_SDRAM_BASE >> 12) & 0xfffff);
+ mcm->lawar1 = (LAWAR_EN
+ | LAWAR_TRGT_IF_DDR1
+ | (LAWAR_SIZE & law_size_ddr1));
+ debug("DDR: LAWBAR1=0x%08x\n", mcm->lawbar1);
+ debug("DDR: LAWAR1=0x%08x\n", mcm->lawar1);
+ }
+
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
+ memsize_ddr2_dimm1 = spd_init(SPD_EEPROM_ADDRESS3,
+ 2, 1,
+ (unsigned int)memsize_total * 1024*1024);
+ memsize_total += memsize_ddr2_dimm1;
+
+ memsize_ddr2_dimm2 = spd_init(SPD_EEPROM_ADDRESS4,
+ 2, 2,
+ (unsigned int)memsize_total * 1024*1024);
+ memsize_total += memsize_ddr2_dimm2;
+
+ ddr2_enabled = enable_ddr(2);
+
+ /* Keep track of memory to be addressed by DDR2 */
+ memsize_ddr2 = memsize_ddr2_dimm1 + memsize_ddr2_dimm2;
+
+ if (ddr2_enabled) {
+ law_size_ddr2 = 19 + __ilog2(memsize_ddr2);
+
+ /*
+ * Set up LAWBAR for DDR 2 space.
+ */
+ if (ddr1_enabled)
+ mcm->lawbar8 = (((memsize_ddr1 * 1024 * 1024) >> 12)
+ & 0xfffff);
+ else
+ mcm->lawbar8 = ((CFG_DDR_SDRAM_BASE >> 12) & 0xfffff);
+
+ mcm->lawar8 = (LAWAR_EN
+ | LAWAR_TRGT_IF_DDR2
+ | (LAWAR_SIZE & law_size_ddr2));
+ debug("\nDDR: LAWBAR8=0x%08x\n", mcm->lawbar8);
+ debug("DDR: LAWAR8=0x%08x\n", mcm->lawar8);
+ }
+#endif /* CONFIG_NUM_DDR_CONTROLLERS > 1 */
+
+ debug("\nMemory sizes are DDR1 = 0x%08lx, DDR2 = 0x%08lx\n",
+ memsize_ddr1, memsize_ddr2);
/*
- * Set up LAWBAR for all of DDR.
+ * If neither DDR controller is enabled return 0.
*/
- mcm->lawbar1 = ((CFG_DDR_SDRAM_BASE >> 12) & 0xfffff);
- mcm->lawar1 = (LAWAR_EN
- | LAWAR_TRGT_IF_DDR
- | (LAWAR_SIZE & law_size));
- debug("DDR: LAWBAR1=0x%08x\n", mcm->lawbar1);
- debug("DDR: LARAR1=0x%08x\n", mcm->lawar1);
+ if (!ddr1_enabled && !ddr2_enabled)
+ return 0;
+ else {
+ printf("Non-interleaved");
+ return memsize_total * 1024 * 1024;
+ }
- return memsize * 1024 * 1024;
+#endif /* CONFIG_DDR_INTERLEAVE */
}
+
#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/mpc86xx/speed.c b/cpu/mpc86xx/speed.c
index a08ae5f..5e05ab8 100644
--- a/cpu/mpc86xx/speed.c
+++ b/cpu/mpc86xx/speed.c
@@ -1,6 +1,6 @@
/*
* Copyright 2004 Freescale Semiconductor.
- * Jeff Brown (jeffrey@freescale.com)
+ * Jeff Brown
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
* (C) Copyright 2000-2002
@@ -29,9 +29,6 @@
#include <mpc86xx.h>
#include <asm/processor.h>
-unsigned long get_board_sys_clk(ulong dummy);
-unsigned long get_sysclk_from_px_regs(void);
-
void get_sys_info (sys_info_t *sysInfo)
{
@@ -39,11 +36,11 @@ void get_sys_info (sys_info_t *sysInfo)
volatile ccsr_gur_t *gur = &immap->im_gur;
uint plat_ratio, e600_ratio;
- plat_ratio = (gur->porpllsr) & 0x0000003e;
+ plat_ratio = (gur->porpllsr) & 0x0000003e;
plat_ratio >>= 1;
switch(plat_ratio) {
- case 0x0:
+ case 0x0:
sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ;
break;
case 0x02:
@@ -55,19 +52,14 @@ void get_sys_info (sys_info_t *sysInfo)
case 0x09:
case 0x0a:
case 0x0c:
- case 0x10:
- sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
- break;
+ case 0x10:
+ sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
+ break;
default:
sysInfo->freqSystemBus = 0;
break;
}
-#if 0
- printf("assigned system bus freq = %d for plat ratio 0x%08lx\n",
- sysInfo->freqSystemBus, plat_ratio);
-#endif
-
e600_ratio = (gur->porpllsr) & 0x003f0000;
e600_ratio >>= 16;
@@ -75,13 +67,13 @@ void get_sys_info (sys_info_t *sysInfo)
case 0x10:
sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus;
break;
- case 0x19:
+ case 0x19:
sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus/2;
break;
case 0x20:
sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus;
break;
- case 0x39:
+ case 0x39:
sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus/2;
break;
case 0x28:
@@ -90,16 +82,10 @@ void get_sys_info (sys_info_t *sysInfo)
case 0x1d:
sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus/2;
break;
- default:
- /* JB - Emulator workaround until real cop is plugged in */
- /* sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus; */
+ default:
sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus;
break;
}
-#if 0
- printf("assigned processor freq = %d for e600 ratio 0x%08lx\n",
- sysInfo->freqProcessor, e600_ratio);
-#endif
}
@@ -128,6 +114,7 @@ int get_clocks(void)
* get_bus_freq
* Return system bus freq in Hz
*/
+
ulong get_bus_freq(ulong dummy)
{
ulong val;
@@ -139,42 +126,6 @@ ulong get_bus_freq(ulong dummy)
return val;
}
-unsigned long get_sysclk_from_px_regs()
-{
- ulong val;
- u8 vclkh, vclkl;
-
- vclkh = in8(PIXIS_BASE + PIXIS_VCLKH);
- vclkl = in8(PIXIS_BASE + PIXIS_VCLKL);
-
- if ((vclkh == 0x84) && (vclkl == 0x07)) {
- val = 33000000;
- }
- if ((vclkh == 0x3F) && (vclkl == 0x20)) {
- val = 40000000;
- }
- if ((vclkh == 0x3F) && (vclkl == 0x2A)) {
- val = 50000000;
- }
- if ((vclkh == 0x24) && (vclkl == 0x04)) {
- val = 66000000;
- }
- if ((vclkh == 0x3F) && (vclkl == 0x4B)) {
- val = 83000000;
- }
- if ((vclkh == 0x3F) && (vclkl == 0x5C)) {
- val = 100000000;
- }
- if ((vclkh == 0xDF) && (vclkl == 0x3B)) {
- val = 134000000;
- }
- if ((vclkh == 0xDF) && (vclkl == 0x4B)) {
- val = 166000000;
- }
-
- return val;
-}
-
/*
* get_board_sys_clk
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index b963631..07e7557 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -207,11 +207,7 @@ boot_warm:
/* init the L2 cache */
addis r3, r0, L2_INIT@h
ori r3, r3, L2_INIT@l
- sync
mtspr l2cr, r3
-#ifdef CONFIG_ALTIVEC
- dssall
-#endif
/* invalidate the L2 cache */
bl l2cache_invalidate
sync
@@ -245,6 +241,13 @@ in_flash:
bl setup_ccsrbar
#endif
+ /* Fix for SMP linux - Changing arbitration to round-robin */
+ lis r3, CFG_CCSRBAR@h
+ ori r3, r3, 0x1000
+ xor r4, r4, r4
+ li r4, 0x1000
+ stw r4, 0(r3)
+
/* setup the law entries */
bl law_entry
sync
@@ -280,9 +283,9 @@ in_flash:
/* make sure timer enabled in guts register too */
lis r3, CFG_CCSRBAR@h
oris r3,r3, 0xE
- ori r3,r3,0x0070 /*Jason from 3*/
+ ori r3,r3,0x0070
lwz r4, 0(r3)
- lis r5,0xFFFC /*Jason from 0xffff*/
+ lis r5,0xFFFC
ori r5,r5,0x5FFF
and r4,r4,r5
stw r4,0(r3)
diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn
new file mode 100644
index 0000000..907a911
--- /dev/null
+++ b/doc/README.mpc8641hpcn
@@ -0,0 +1,123 @@
+Freescale MPC8641HPCN board
+===========================
+
+Created 05/24/2006 Haiying Wang
+-------------------------------
+
+1. Building U-Boot
+------------------
+The 86xx HPCN code base is known to compile using:
+ Binutils 2.15, Gcc 3.4.3, Glibc 2.3.3
+
+ $ make MPC8641HPCN_config
+ Configuring for MPC8641HPCN board...
+
+ $ make
+
+
+2. Switch and Jumper Setting
+----------------------------
+Jumpers:
+ J14 Pins 1-2 (near plcc32 socket)
+
+Switches:
+ SW1(1-5) = 01100 CFG_COREPLL = 01000 :: CORE = 2:1
+ 01100 :: CORE = 2.5:1
+ 10000 :: CORE = 3:1
+ 11100 :: CORE = 3.5:1
+ 10100 :: CORE = 4:1
+ 01110 :: CORE = 4.5:1
+ SW1(6-8) = 001 CFG_SYSCLK = 000 :: SYSCLK = 33MHz
+ 001 :: SYSCLK = 40MHz
+
+ SW2(1-4) = 1100 CFG_CCBPLL = 0010 :: 2X
+ 0100 :: 4X
+ 0110 :: 6X
+ 1000 :: 8X
+ 1010 :: 10X
+ 1100 :: 12X
+ 1110 :: 14X
+ 0000 :: 16X
+ SW2(5-8) = 1110 CFG_BOOTLOC = 1110 :: boot 16-bit localbus
+
+ SW3(1-7) = 0011000 CFG_VID = 0011000 :: VCORE = 1.2V
+ 0100000 :: VCORE = 1.11V
+ SW3(8) = 0 VCC_PLAT = 0 :: VCC_PLAT = 1.2V
+ 1 :: VCC_PLAT = 1.0V
+
+ SW4(1-2) = 11 CFG_HOSTMODE = 11 :: both prots host/root
+ SW4(3-4) = 11 CFG_BOOTSEQ = 11 :: no boot seq
+ SW4(5-8) = 0011 CFG_IOPORT = 0011 :: both PEX
+
+ SW5(1) = 1 CFG_FLASHMAP = 1 :: boot from flash
+ 0 :: boot from PromJet
+ SW5(2) = 1 CFG_FLASHBANK = 1 :: swap upper/lower
+ halves (virtual banks)
+ 0 :: normal
+ SW5(3) = 0 CFG_FLASHWP = 0 :: not protected
+ SW5(4) = 0 CFG_PORTDIV = 1 :: 2:1 for PD4
+ 1:1 for PD6
+ SW5(5-6) = 11 CFG_PIXISOPT = 11 :: s/w determined
+ SW5(7-8) = 11 CFG_LADOPT = 11 :: s/w determined
+
+ SW6(1) = 1 CFG_CPUBOOT = 1 :: no boot holdoff
+ SW6(2) = 1 CFG_BOOTADDR = 1 :: no traslation
+ SW6(3-5) = 000 CFG_REFCLKSEL = 000 :: 100MHZ
+ SW6(6) = 1 CFG_SERROM_ADDR= 1 ::
+ SW6(7) = 1 CFG_MEMDEBUG = 1 ::
+ SW6(8) = 1 CFG_DDRDEBUG = 1 ::
+
+ SW8(1) = 1 ACZ_SYNC = 1 :: 48MHz on TP49
+ SW8(2) = 1 ACB_SYNC = 1 :: THRMTRIP disabled
+ SW8(3) = 1 ACZ_SDOUT = 1 :: p4 mode
+ SW8(4) = 1 ACB_SDOUT = 1 :: PATA freq. = 133MHz
+ SW8(5) = 0 SUSLED = 0 :: SouthBridge Mode
+ SW8(6) = 0 SPREAD = 0 :: REFCLK SSCG Disabled
+ SW8(7) = 1 ACPWR = 1 :: non-battery
+ SW8(8) = 0 CFG_IDWP = 0 :: write enable
+
+
+3. Flash U-Boot
+---------------
+The flash range 0xFF800000 to 0xFFFFFFFF can be divided into 2 halves.
+It is possible to use either half to boot using u-boot. Switch 5 bit 2
+is used for this purpose.
+
+0xFF800000 to 0xFFBFFFFF - 4MB
+0xFFC00000 to 0xFFFFFFFF - 4MB
+When this bit is 0, U-Boot is at 0xFFF00000.
+When this bit is 1, U-Boot is at 0xFFB00000.
+
+Use the above mentioned flash commands to program the other half, and
+use switch 5, bit 2 to alternate between the halves. Note: The booting
+version of U-Boot will always be at 0xFFF00000.
+
+To Flash U-Boot into the booting bank (0xFFC00000 - 0xFFFFFFFF):
+
+ tftp 1000000 u-boot.bin
+ protect off all
+ erase fff00000 ffffffff
+ cp.b 1000000 fff00100 80000
+
+To Flash U-boot into the alternative bank (0xFF800000 - 0xFFBFFFFF):
+
+ tftp 1000000 u-boot.bin
+ erase ffb00000 ffbfffff
+ cp.b 1000000 ffb00100 80000
+
+
+4. Memory Map
+-------------
+
+ Memory Range Device Size
+ ------------ ------ ----
+ 0x0000_0000 0x7fff_ffff DDR 2G
+ 0x8000_0000 0x9fff_ffff PCI1/PEX1 MEM 512M
+ 0xa000_0000 0xafff_ffff PCI2/PEX2 MEM 512M
+ 0xf800_0000 0xf80f_ffff CCSR 1M
+ 0xf810_0000 0xf81f_ffff PIXIS 1M
+ 0xf840_0000 0xf840_3fff Stack space 32K
+ 0xe200_0000 0xe2ff_ffff PCI1/PEX1 IO 512M
+ 0xe300_0000 0xe3ff_ffff PCI2/PEX2 IO 512M
+ 0xfe00_0000 0xfeff_ffff Flash(alternate)16M
+ 0xff00_0000 0xffff_ffff Flash(boot bank)16M
diff --git a/include/asm-ppc/immap_86xx.h b/include/asm-ppc/immap_86xx.h
index 6bbe072..9e81b47 100644
--- a/include/asm-ppc/immap_86xx.h
+++ b/include/asm-ppc/immap_86xx.h
@@ -52,7 +52,7 @@ typedef struct ccsr_local_mcm {
uint lawbar7; /* 0xce8 - Local Access Window 7 Base Address Register */
char res19[4];
uint lawar7; /* 0xcf0 - Local Access Window 7 Attributes Register */
- char res20[16];
+ char res20[20];
uint lawbar8; /* 0xd08 - Local Access Window 8 Base Address Register */
char res21[4];
uint lawar8; /* 0xd10 - Local Access Window 8 Attributes Register */
@@ -60,7 +60,7 @@ typedef struct ccsr_local_mcm {
uint lawbar9; /* 0xd28 - Local Access Window 9 Base Address Register */
char res23[4];
uint lawar9; /* 0xd30 - Local Access Window 9 Attributes Register */
- char res24[720];
+ char res24[716];
uint abcr; /* 0x1000 - MCM CCB Address Configuration Register */
char res25[4];
uint dbcr; /* 0x1008 - MCM MPX data bus Configuration Register */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index d4a28ed..2a197be 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -57,6 +57,13 @@
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_NUM_DDR_CONTROLLERS 2
+/* #define CONFIG_DDR_INTERLEAVE 1 */
+#define CACHE_LINE_INTERLEAVING 0x20000000
+#define PAGE_INTERLEAVING 0x21000000
+#define BANK_INTERLEAVING 0x22000000
+#define SUPER_BANK_INTERLEAVING 0x23000000
+
#define CONFIG_ALTIVEC 1
@@ -99,7 +106,10 @@
/*
* Determine DDR configuration from I2C interface.
*/
- #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
+ #define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */
+ #define SPD_EEPROM_ADDRESS2 0x52 /* DDR DIMM */
+ #define SPD_EEPROM_ADDRESS3 0x53 /* DDR DIMM */
+ #define SPD_EEPROM_ADDRESS4 0x54 /* DDR DIMM */
#else
/*
@@ -136,15 +146,16 @@
/*
- * In MPC8641HPCN, we allocate 16MB flash spaces at fe000000 and ff000000
- * We only have an 8MB flash. In effect, the addresses from fe000000 to fe7fffff
+ * In MPC8641HPCN, allocate 16MB flash spaces at fe000000 and ff000000.
+ * There is an 8MB flash. In effect, the addresses from fe000000 to fe7fffff
* map to fe800000 to ffffffff, and ff000000 to ff7fffff map to ffffffff.
* However, when u-boot comes up, the flash_init needs hard start addresses
- * to build its info table. For user convenience, we have the flash addresses
- * as fe800000 and ff800000. That way, when we do flash operations, u-boot
- * knows where the flash is and the user can download u-boot code from promjet to
- * fef00000 <- more intuitive than fe700000. Note that, on switching the boot
- * location, fef00000 becomes fff00000.
+ * to build its info table. For user convenience, the flash addresses is
+ * fe800000 and ff800000. That way, u-boot knows where the flash is
+ * and the user can download u-boot code from promjet to fef00000, a
+ * more intuitive location than fe700000.
+ *
+ * Note that, on switching the boot location, fef00000 becomes fff00000.
*/
#define CFG_FLASH_BASE 0xfe800000 /* start of FLASH 32M */
#define CFG_FLASH_BASE2 0xff800000
@@ -257,14 +268,18 @@
#define CFG_64BIT_VSPRINTF 1
#define CFG_64BIT_STRTOUL 1
-/* I2C */
+/*
+ * I2C
+ */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
-/* RapidIO MMU */
+/*
+ * RapidIO MMU
+ */
#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE
#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */
@@ -347,19 +362,21 @@
#endif /* CONFIG_TSEC_ENET */
-/* BAT0 2G Cacheable, non-guarded
+/*
+ * BAT0 2G Cacheable, non-guarded
* 0x0000_0000 2G DDR
*/
#define CFG_DBAT0L ( BATL_PP_RW | BATL_CACHEINHIBIT \
| BATL_GUARDEDSTORAGE | BATL_MEMCOHERENCE )
-#define CFG_DBAT0U ( BATU_BL_512M | BATU_VS | BATU_VP )
+#define CFG_DBAT0U ( BATU_BL_2G | BATU_VS | BATU_VP )
#define CFG_IBAT0L ( BATL_PP_RW | BATL_CACHEINHIBIT | BATL_MEMCOHERENCE)
#define CFG_IBAT0U CFG_DBAT0U
-/* BAT1 1G Cache-inhibited, guarded
+/*
+ * BAT1 1G Cache-inhibited, guarded
* 0x8000_0000 512M PCI-Express 1 Memory
* 0xa000_0000 512M PCI-Express 2 Memory
- ** SS - Changed it for operating from 0xd0000000
+ * Changed it for operating from 0xd0000000
*/
#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
@@ -367,7 +384,8 @@
#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT1U CFG_DBAT1U
-/* BAT2 512M Cache-inhibited, guarded
+/*
+ * BAT2 512M Cache-inhibited, guarded
* 0xc000_0000 512M RapidIO Memory
*/
#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \
@@ -376,7 +394,8 @@
#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT2U CFG_DBAT2U
-/* BAT3 4M Cache-inhibited, guarded
+/*
+ * BAT3 4M Cache-inhibited, guarded
* 0xf800_0000 4M CCSR
*/
#define CFG_DBAT3L ( CFG_CCSRBAR | BATL_PP_RW \
@@ -385,10 +404,11 @@
#define CFG_IBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT3U CFG_DBAT3U
-/* BAT4 32M Cache-inhibited, guarded
+/*
+ * BAT4 32M Cache-inhibited, guarded
* 0xe200_0000 16M PCI-Express 1 I/O
* 0xe300_0000 16M PCI-Express 2 I/0
- ** SS - Note that this is at 0xe0000000
+ * Note that this is at 0xe0000000
*/
#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
@@ -396,7 +416,8 @@
#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT4U CFG_DBAT4U
-/* BAT5 128K Cacheable, non-guarded
+/*
+ * BAT5 128K Cacheable, non-guarded
* 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory)
*/
#define CFG_DBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
@@ -404,7 +425,8 @@
#define CFG_IBAT5L CFG_DBAT5L
#define CFG_IBAT5U CFG_DBAT5U
-/* BAT6 32M Cache-inhibited, guarded
+/*
+ * BAT6 32M Cache-inhibited, guarded
* 0xfe00_0000 32M FLASH
*/
#define CFG_DBAT6L ( CFG_FLASH_BASE | BATL_PP_RW \
@@ -427,7 +449,7 @@
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
- #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_NO_FLASH 1 /* Flash is not usable now */
generated by cgit v1.1 at 2024-12-02 11:03:33 +0000