diff options
| -rw-r--r-- | CHANGELOG | 6 | ||||
| -rw-r--r-- | common/console.c | 8 | ||||
| -rw-r--r-- | drivers/keyboard.c | 10 | ||||
| -rw-r--r-- | include/configs/TQM5200.h | 26 | ||||
| -rw-r--r-- | include/sm501.h (renamed from drivers/sm501.h) | 0 |
5 files changed, 31 insertions, 19 deletions
@@ -2,6 +2,12 @@ Changes for U-Boot 1.1.3: ====================================================================== +* Patch by Detlev Zundel, 31 Mar 2005: + Cleanup duplicate definition of overwrite_console() + +* Update TQM5200 configuration; + prepare for Rev. 200 starter kit boards + * Patch by Scott McNutt, 21 Oct 2004: Add support for Nios-II EPCS Controller core. diff --git a/common/console.c b/common/console.c index 8dbd8e3..3c535d2 100644 --- a/common/console.c +++ b/common/console.c @@ -39,11 +39,9 @@ int console_changed = 0; */ #ifdef CFG_CONSOLE_OVERWRITE_ROUTINE extern int overwrite_console (void); +#define OVERWRITE_CONSOLE overwrite_console () #else -int overwrite_console (void) -{ - return (0); -} +#define OVERWRITE_CONSOLE 0 #endif /* CFG_CONSOLE_OVERWRITE_ROUTINE */ #endif /* CFG_CONSOLE_IS_IN_ENV */ @@ -429,7 +427,7 @@ int console_init_r (void) stdoutname = getenv ("stdout"); stderrname = getenv ("stderr"); - if (overwrite_console () == 0) { /* if not overwritten by config switch */ + if (OVERWRITE_CONSOLE == 0) { /* if not overwritten by config switch */ inputdev = search_device (DEV_FLAGS_INPUT, stdinname); outputdev = search_device (DEV_FLAGS_OUTPUT, stdoutname); errdev = search_device (DEV_FLAGS_OUTPUT, stderrname); diff --git a/drivers/keyboard.c b/drivers/keyboard.c index f12de83..1579095 100644 --- a/drivers/keyboard.c +++ b/drivers/keyboard.c @@ -262,12 +262,10 @@ void handle_scancode(unsigned char scancode) #ifdef CFG_CONSOLE_OVERWRITE_ROUTINE extern int overwrite_console (void); +#define OVERWRITE_CONSOLE overwrite_console () #else -int overwrite_console (void) -{ - return (0); -} -#endif +#define OVERWRITE_CONSOLE 0 +#endif /* CFG_CONSOLE_OVERWRITE_ROUTINE */ int kbd_init (void) { @@ -290,7 +288,7 @@ int kbd_init (void) /* check if this is the standard input device */ if(strcmp(stdinname,DEVNAME)==0) { /* reassign the console */ - if(overwrite_console()) { + if(OVERWRITE_CONSOLE) { return 1; } error=console_assign(stdin,DEVNAME); diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index a5a6344..b33f726 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -37,6 +37,7 @@ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ #define CONFIG_STK52XX 1 /* ... on a STK52XX base board */ +#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */ #define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ @@ -85,6 +86,7 @@ #define CONFIG_EEPRO100 1 #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 +#endif /* CONFIG_STK52XX */ #ifdef CONFIG_PCI #define ADD_PCI_CMD CFG_CMD_PCI @@ -105,6 +107,7 @@ #define CONFIG_CONSOLE_EXTRA_INFO #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_SPLASH_SCREEN +#define CFG_CONSOLE_IS_IN_ENV #endif #ifdef CONFIG_VIDEO @@ -373,11 +376,14 @@ * Bit 0 (mask: 0x80000000): 1 * use ALT CAN position: Bits 2-3 (mask: 0x30000000): * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. - * Set for rev 100 modules with an onboard EEPROM (because, - * there I2C1 is used as I2C bus) * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. - * Set for rev 200 modules + * Use for REV200 STK52XX boards. Do not use with REV100 modules + * (because, there I2C1 is used as I2C bus) * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 + * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) + * 000 -> All PSC2 pins are GIOPs + * 001 -> CAN1/2 on PSC2 pins + * Use for REV100 STK52xx boards * use PSC6: * on STK52xx: * use as UART. Pins PSC6_0 to PSC6_3 are used. @@ -392,12 +398,16 @@ #if defined (CONFIG_MINIFAP) # define CFG_GPS_PORT_CONFIG 0x91000004 #elif defined (CONFIG_STK52XX) -# if defined (CONFIG_TQM5200_REV100) -# define CFG_GPS_PORT_CONFIG 0x81500004 -# else -# define CFG_GPS_PORT_CONFIG 0x91500004 +# if defined (CONFIG_STK52XX_REV100) +# define CFG_GPS_PORT_CONFIG 0x81500014 +# else /* STK52xx REV200 and above */ +# if defined (CONFIG_TQM5200_REV100) +# error TQM5200 REV100 not supported on STK52XX REV200 or above +# else/* TQM5200 REV200 and above */ +# define CFG_GPS_PORT_CONFIG 0x91500004 +# endif # endif -#else /* TMQ5200_IP */ +#else /* TMQ5200 Inbetriebnahme-Board */ # define CFG_GPS_PORT_CONFIG 0x81000004 #endif diff --git a/drivers/sm501.h b/include/sm501.h index d8f26fb..d8f26fb 100644 --- a/drivers/sm501.h +++ b/include/sm501.h |