diff options
-rw-r--r-- | arch/arm/cpu/armv7/mx6/clock.c | 29 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/clock.h | 1 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/mx6ull_pins.h | 26 | ||||
-rw-r--r-- | board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c | 221 | ||||
-rw-r--r-- | configs/mx6ull_14x14_ddr3_arm2_epdc_defconfig | 5 | ||||
-rw-r--r-- | include/configs/mx6ull_ddr3_arm2.h | 39 | ||||
-rw-r--r-- | include/mxc_epdc_fb.h | 2 |
7 files changed, 322 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index c289a14..0cb576f 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -1372,6 +1372,35 @@ void enable_ipu_clock(void) } } +#if defined(CONFIG_MXC_EPDC) && defined(CONFIG_MX6ULL) +void enable_epdc_clock(void) +{ + u32 reg = 0; + + /* disable the clock gate first */ + clrbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_EPDC_CLK_ENABLE_MASK); + + /* PLL3_PFD2 */ + reg = readl(&imx_ccm->chsccdr); + reg &= ~MXC_CCM_CHSCCDR_EPDC_PRE_CLK_SEL_MASK; + reg |= 5 << MXC_CCM_CHSCCDR_EPDC_PRE_CLK_SEL_OFFSET; + writel(reg, &imx_ccm->chsccdr); + + reg = readl(&imx_ccm->chsccdr); + reg &= ~MXC_CCM_CHSCCDR_EPDC_PODF_MASK; + reg |= 7 << MXC_CCM_CHSCCDR_EPDC_PODF_OFFSET; + writel(reg, &imx_ccm->chsccdr); + + reg = readl(&imx_ccm->chsccdr); + reg &= ~MXC_CCM_CHSCCDR_EPDC_CLK_SEL_MASK; + reg |= 0 <<MXC_CCM_CHSCCDR_EPDC_CLK_SEL_OFFSET; + writel(reg, &imx_ccm->chsccdr); + + /* enable the clock gate */ + setbits_le32(&imx_ccm->CCGR3, MXC_CCM_CCGR3_EPDC_CLK_ENABLE_MASK); +} +#endif + /***************************************************/ U_BOOT_CMD( diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index 9101b83..d789159 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -72,6 +72,7 @@ int enable_lcdif_clock(u32 base_addr); int enable_lvds_bridge(u32 lcd_base_addr); void enable_qspi_clk(int qspi_num); void enable_thermal_clk(void); +void enable_epdc_clock(void); void mxs_set_lcdclk(u32 base_addr, u32 freq); void mxs_set_vadcclk(void); #endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-mx6/mx6ull_pins.h b/arch/arm/include/asm/arch-mx6/mx6ull_pins.h index 2138b00..85f3dce 100644 --- a/arch/arm/include/asm/arch-mx6/mx6ull_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6ull_pins.h @@ -430,6 +430,7 @@ enum { MX6_PAD_ENET2_RX_DATA0__GPIO2_IO08 = IOMUX_PAD(0x0370, 0x00E4, 5, 0x0000, 0, 0), MX6_PAD_ENET2_RX_DATA0__KPP_ROW04 = IOMUX_PAD(0x0370, 0x00E4, 6, 0x0000, 0, 0), MX6_PAD_ENET2_RX_DATA0__USB_OTG1_PWR = IOMUX_PAD(0x0370, 0x00E4, 8, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_DATA0__EPDC_SDDO08 = IOMUX_PAD(0x0370, 0x00E4, 9, 0x0000, 0, 0), MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01 = IOMUX_PAD(0x0374, 0x00E8, 0, 0x0000, 0, 0), MX6_PAD_ENET2_RX_DATA1__UART6_DCE_RX = IOMUX_PAD(0x0374, 0x00E8, 1, 0x064C, 2, 0), @@ -440,6 +441,7 @@ enum { MX6_PAD_ENET2_RX_DATA1__GPIO2_IO09 = IOMUX_PAD(0x0374, 0x00E8, 5, 0x0000, 0, 0), MX6_PAD_ENET2_RX_DATA1__KPP_COL04 = IOMUX_PAD(0x0374, 0x00E8, 6, 0x0000, 0, 0), MX6_PAD_ENET2_RX_DATA1__USB_OTG1_OC = IOMUX_PAD(0x0374, 0x00E8, 8, 0x0664, 1, 0), + MX6_PAD_ENET2_RX_DATA1__EPDC_SDDO09 = IOMUX_PAD(0x0374, 0x00E8, 9, 0x0000, 0, 0), MX6_PAD_ENET2_RX_EN__ENET2_RX_EN = IOMUX_PAD(0x0378, 0x00EC, 0, 0x0000, 0, 0), MX6_PAD_ENET2_RX_EN__UART7_DCE_TX = IOMUX_PAD(0x0378, 0x00EC, 1, 0x0000, 0, 0), @@ -450,6 +452,7 @@ enum { MX6_PAD_ENET2_RX_EN__GPIO2_IO10 = IOMUX_PAD(0x0378, 0x00EC, 5, 0x0000, 0, 0), MX6_PAD_ENET2_RX_EN__KPP_ROW05 = IOMUX_PAD(0x0378, 0x00EC, 6, 0x0000, 0, 0), MX6_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M = IOMUX_PAD(0x0378, 0x00EC, 8, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_EN__EPDC_SDDO10 = IOMUX_PAD(0x0378, 0x00EC, 9, 0x0000, 0, 0), MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00 = IOMUX_PAD(0x037C, 0x00F0, 0, 0x0000, 0, 0), MX6_PAD_ENET2_TX_DATA0__UART7_DCE_RX = IOMUX_PAD(0x037C, 0x00F0, 1, 0x0654, 1, 0), @@ -459,6 +462,7 @@ enum { MX6_PAD_ENET2_TX_DATA0__EIM_EB_B02 = IOMUX_PAD(0x037C, 0x00F0, 4, 0x0000, 0, 0), MX6_PAD_ENET2_TX_DATA0__GPIO2_IO11 = IOMUX_PAD(0x037C, 0x00F0, 5, 0x0000, 0, 0), MX6_PAD_ENET2_TX_DATA0__KPP_COL05 = IOMUX_PAD(0x037C, 0x00F0, 6, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_DATA0__EPDC_SDDO11 = IOMUX_PAD(0x037C, 0x00F0, 9, 0x0000, 0, 0), MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01 = IOMUX_PAD(0x0380, 0x00F4, 0, 0x0000, 0, 0), MX6_PAD_ENET2_TX_DATA1__UART8_DCE_TX = IOMUX_PAD(0x0380, 0x00F4, 1, 0x0000, 0, 0), @@ -469,6 +473,7 @@ enum { MX6_PAD_ENET2_TX_DATA1__GPIO2_IO12 = IOMUX_PAD(0x0380, 0x00F4, 5, 0x0000, 0, 0), MX6_PAD_ENET2_TX_DATA1__KPP_ROW06 = IOMUX_PAD(0x0380, 0x00F4, 6, 0x0000, 0, 0), MX6_PAD_ENET2_TX_DATA1__USB_OTG2_PWR = IOMUX_PAD(0x0380, 0x00F4, 8, 0x0000, 0, 0), + MX6_PAD_ENET2_TX_DATA1__EPDC_SDDO12 = IOMUX_PAD(0x0380, 0x00F4, 9, 0x0000, 0, 0), MX6_PAD_ENET2_TX_EN__ENET2_TX_EN = IOMUX_PAD(0x0384, 0x00F8, 0, 0x0000, 0, 0), MX6_PAD_ENET2_TX_EN__UART8_DCE_RX = IOMUX_PAD(0x0384, 0x00F8, 1, 0x065C, 1, 0), @@ -479,6 +484,7 @@ enum { MX6_PAD_ENET2_TX_EN__GPIO2_IO13 = IOMUX_PAD(0x0384, 0x00F8, 5, 0x0000, 0, 0), MX6_PAD_ENET2_TX_EN__KPP_COL06 = IOMUX_PAD(0x0384, 0x00F8, 6, 0x0000, 0, 0), MX6_PAD_ENET2_TX_EN__USB_OTG2_OC = IOMUX_PAD(0x0384, 0x00F8, 8, 0x0660, 1, 0), + MX6_PAD_ENET2_TX_EN__EPDC_SDDO13 = IOMUX_PAD(0x0384, 0x00F8, 9, 0x0000, 0, 0), MX6_PAD_ENET2_TX_CLK__ENET2_TX_CLK = IOMUX_PAD(0x0388, 0x00FC, IOMUX_CONFIG_SION | 0, 0x0000, 0, 0), MX6_PAD_ENET2_TX_CLK__UART8_DCE_CTS = IOMUX_PAD(0x0388, 0x00FC, 1, 0x0000, 0, 0), @@ -489,6 +495,7 @@ enum { MX6_PAD_ENET2_TX_CLK__GPIO2_IO14 = IOMUX_PAD(0x0388, 0x00FC, 5, 0x0000, 0, 0), MX6_PAD_ENET2_TX_CLK__KPP_ROW07 = IOMUX_PAD(0x0388, 0x00FC, 6, 0x0000, 0, 0), MX6_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID = IOMUX_PAD(0x0388, 0x00FC, 8, 0x04BC, 1, 0), + MX6_PAD_ENET2_TX_CLK__EPDC_SDDO14 = IOMUX_PAD(0x0388, 0x00FC, 9, 0x0000, 0, 0), MX6_PAD_ENET2_RX_ER__ENET2_RX_ER = IOMUX_PAD(0x038C, 0x0100, 0, 0x0000, 0, 0), MX6_PAD_ENET2_RX_ER__UART8_DCE_RTS = IOMUX_PAD(0x038C, 0x0100, 1, 0x0658, 1, 0), @@ -499,6 +506,7 @@ enum { MX6_PAD_ENET2_RX_ER__GPIO2_IO15 = IOMUX_PAD(0x038C, 0x0100, 5, 0x0000, 0, 0), MX6_PAD_ENET2_RX_ER__KPP_COL07 = IOMUX_PAD(0x038C, 0x0100, 6, 0x0000, 0, 0), MX6_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY = IOMUX_PAD(0x038C, 0x0100, 8, 0x0000, 0, 0), + MX6_PAD_ENET2_RX_ER__EPDC_SDDO15 = IOMUX_PAD(0x038C, 0x0100, 9, 0x0000, 0, 0), MX6_PAD_LCD_CLK__LCDIF_CLK = IOMUX_PAD(0x0390, 0x0104, 0, 0x0000, 0, 0), MX6_PAD_LCD_CLK__LCDIF_WR_RWN = IOMUX_PAD(0x0390, 0x0104, 1, 0x0000, 0, 0), @@ -508,6 +516,7 @@ enum { MX6_PAD_LCD_CLK__EIM_CS2_B = IOMUX_PAD(0x0390, 0x0104, 4, 0x0000, 0, 0), MX6_PAD_LCD_CLK__GPIO3_IO00 = IOMUX_PAD(0x0390, 0x0104, 5, 0x0000, 0, 0), MX6_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x0390, 0x0104, 8, 0x0000, 0, 0), + MX6_PAD_LCD_CLK__EPDC_SDCLK = IOMUX_PAD(0x0390, 0x0104, 9, 0x0000, 0, 0), MX6_PAD_LCD_ENABLE__LCDIF_ENABLE = IOMUX_PAD(0x0394, 0x0108, 0, 0x0000, 0, 0), MX6_PAD_LCD_ENABLE__LCDIF_RD_E = IOMUX_PAD(0x0394, 0x0108, 1, 0x0000, 0, 0), @@ -517,6 +526,7 @@ enum { MX6_PAD_LCD_ENABLE__EIM_CS3_B = IOMUX_PAD(0x0394, 0x0108, 4, 0x0000, 0, 0), MX6_PAD_LCD_ENABLE__GPIO3_IO01 = IOMUX_PAD(0x0394, 0x0108, 5, 0x0000, 0, 0), MX6_PAD_LCD_ENABLE__ECSPI2_RDY = IOMUX_PAD(0x0394, 0x0108, 8, 0x0000, 0, 0), + MX6_PAD_LCD_ENABLE__EPDC_SDLE = IOMUX_PAD(0x0394, 0x0108, 9, 0x0000, 0, 0), MX6_PAD_LCD_HSYNC__LCDIF_HSYNC = IOMUX_PAD(0x0398, 0x010C, 0, 0x05DC, 0, 0), MX6_PAD_LCD_HSYNC__LCDIF_RS = IOMUX_PAD(0x0398, 0x010C, 1, 0x0000, 0, 0), @@ -526,6 +536,7 @@ enum { MX6_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB = IOMUX_PAD(0x0398, 0x010C, 4, 0x0000, 0, 0), MX6_PAD_LCD_HSYNC__GPIO3_IO02 = IOMUX_PAD(0x0398, 0x010C, 5, 0x0000, 0, 0), MX6_PAD_LCD_HSYNC__ECSPI2_SS1 = IOMUX_PAD(0x0398, 0x010C, 8, 0x0000, 0, 0), + MX6_PAD_LCD_HSYNC__EPDC_SDOE = IOMUX_PAD(0x0398, 0x010C, 9, 0x0000, 0, 0), MX6_PAD_LCD_VSYNC__LCDIF_VSYNC = IOMUX_PAD(0x039C, 0x0110, 0, 0x0000, 0, 0), MX6_PAD_LCD_VSYNC__LCDIF_BUSY = IOMUX_PAD(0x039C, 0x0110, 1, 0x05DC, 1, 0), @@ -535,6 +546,7 @@ enum { MX6_PAD_LCD_VSYNC__WDOG2_WDOG_B = IOMUX_PAD(0x039C, 0x0110, 4, 0x0000, 0, 0), MX6_PAD_LCD_VSYNC__GPIO3_IO03 = IOMUX_PAD(0x039C, 0x0110, 5, 0x0000, 0, 0), MX6_PAD_LCD_VSYNC__ECSPI2_SS2 = IOMUX_PAD(0x039C, 0x0110, 8, 0x0000, 0, 0), + MX6_PAD_LCD_VSYNC__EPDC_SDCE0 = IOMUX_PAD(0x039C, 0x0110, 9, 0x0000, 0, 0), MX6_PAD_LCD_RESET__LCDIF_RESET = IOMUX_PAD(0x03A0, 0x0114, 0, 0x0000, 0, 0), MX6_PAD_LCD_RESET__LCDIF_CS = IOMUX_PAD(0x03A0, 0x0114, 1, 0x0000, 0, 0), @@ -543,6 +555,7 @@ enum { MX6_PAD_LCD_RESET__WDOG1_WDOG_ANY = IOMUX_PAD(0x03A0, 0x0114, 4, 0x0000, 0, 0), MX6_PAD_LCD_RESET__GPIO3_IO04 = IOMUX_PAD(0x03A0, 0x0114, 5, 0x0000, 0, 0), MX6_PAD_LCD_RESET__ECSPI2_SS3 = IOMUX_PAD(0x03A0, 0x0114, 8, 0x0000, 0, 0), + MX6_PAD_LCD_RESET__EPDC_GDOE = IOMUX_PAD(0x03A0, 0x0114, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA00__LCDIF_DATA00 = IOMUX_PAD(0x03A4, 0x0118, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA00__PWM1_OUT = IOMUX_PAD(0x03A4, 0x0118, 1, 0x0000, 0, 0), @@ -551,6 +564,7 @@ enum { MX6_PAD_LCD_DATA00__GPIO3_IO05 = IOMUX_PAD(0x03A4, 0x0118, 5, 0x0000, 0, 0), MX6_PAD_LCD_DATA00__SRC_BT_CFG00 = IOMUX_PAD(0x03A4, 0x0118, 6, 0x0000, 0, 0), MX6_PAD_LCD_DATA00__SAI1_MCLK = IOMUX_PAD(0x03A4, 0x0118, 8, 0x05E0, 1, 0), + MX6_PAD_LCD_DATA00__EPDC_SDDO00 = IOMUX_PAD(0x03A4, 0x0118, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA01__LCDIF_DATA01 = IOMUX_PAD(0x03A8, 0x011C, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA01__PWM2_OUT = IOMUX_PAD(0x03A8, 0x011C, 1, 0x0000, 0, 0), @@ -559,6 +573,7 @@ enum { MX6_PAD_LCD_DATA01__GPIO3_IO06 = IOMUX_PAD(0x03A8, 0x011C, 5, 0x0000, 0, 0), MX6_PAD_LCD_DATA01__SRC_BT_CFG01 = IOMUX_PAD(0x03A8, 0x011C, 6, 0x0000, 0, 0), MX6_PAD_LCD_DATA01__SAI1_TX_SYNC = IOMUX_PAD(0x03A8, 0x011C, 8, 0x05EC, 0, 0), + MX6_PAD_LCD_DATA01__EPDC_SDDO01 = IOMUX_PAD(0x03A8, 0x011C, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA02__LCDIF_DATA02 = IOMUX_PAD(0x03AC, 0x0120, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA02__PWM3_OUT = IOMUX_PAD(0x03AC, 0x0120, 1, 0x0000, 0, 0), @@ -567,6 +582,7 @@ enum { MX6_PAD_LCD_DATA02__GPIO3_IO07 = IOMUX_PAD(0x03AC, 0x0120, 5, 0x0000, 0, 0), MX6_PAD_LCD_DATA02__SRC_BT_CFG02 = IOMUX_PAD(0x03AC, 0x0120, 6, 0x0000, 0, 0), MX6_PAD_LCD_DATA02__SAI1_TX_BCLK = IOMUX_PAD(0x03AC, 0x0120, 8, 0x05E8, 0, 0), + MX6_PAD_LCD_DATA02__EPDC_SDDO02 = IOMUX_PAD(0x03AC, 0x0120, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA03__LCDIF_DATA03 = IOMUX_PAD(0x03B0, 0x0124, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA03__PWM4_OUT = IOMUX_PAD(0x03B0, 0x0124, 1, 0x0000, 0, 0), @@ -575,6 +591,7 @@ enum { MX6_PAD_LCD_DATA03__GPIO3_IO08 = IOMUX_PAD(0x03B0, 0x0124, 5, 0x0000, 0, 0), MX6_PAD_LCD_DATA03__SRC_BT_CFG03 = IOMUX_PAD(0x03B0, 0x0124, 6, 0x0000, 0, 0), MX6_PAD_LCD_DATA03__SAI1_RX_DATA = IOMUX_PAD(0x03B0, 0x0124, 8, 0x05E4, 0, 0), + MX6_PAD_LCD_DATA03__EPDC_SDDO03 = IOMUX_PAD(0x03B0, 0x0124, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA04__LCDIF_DATA04 = IOMUX_PAD(0x03B4, 0x0128, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA04__UART8_DCE_CTS = IOMUX_PAD(0x03B4, 0x0128, 1, 0x0000, 0, 0), @@ -584,6 +601,7 @@ enum { MX6_PAD_LCD_DATA04__GPIO3_IO09 = IOMUX_PAD(0x03B4, 0x0128, 5, 0x0000, 0, 0), MX6_PAD_LCD_DATA04__SRC_BT_CFG04 = IOMUX_PAD(0x03B4, 0x0128, 6, 0x0000, 0, 0), MX6_PAD_LCD_DATA04__SAI1_TX_DATA = IOMUX_PAD(0x03B4, 0x0128, 8, 0x0000, 0, 0), + MX6_PAD_LCD_DATA04__EPDC_SDDO04 = IOMUX_PAD(0x03B4, 0x0128, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA05__LCDIF_DATA05 = IOMUX_PAD(0x03B8, 0x012C, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA05__UART8_DCE_RTS = IOMUX_PAD(0x03B8, 0x012C, 1, 0x0658, 3, 0), @@ -593,6 +611,7 @@ enum { MX6_PAD_LCD_DATA05__GPIO3_IO10 = IOMUX_PAD(0x03B8, 0x012C, 5, 0x0000, 0, 0), MX6_PAD_LCD_DATA05__SRC_BT_CFG05 = IOMUX_PAD(0x03B8, 0x012C, 6, 0x0000, 0, 0), MX6_PAD_LCD_DATA05__ECSPI1_SS1 = IOMUX_PAD(0x03B8, 0x012C, 8, 0x0000, 0, 0), + MX6_PAD_LCD_DATA05__EPDC_SDDO05 = IOMUX_PAD(0x03B8, 0x012C, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA06__LCDIF_DATA06 = IOMUX_PAD(0x03BC, 0x0130, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA06__UART7_DCE_CTS = IOMUX_PAD(0x03BC, 0x0130, 1, 0x0000, 0, 0), @@ -602,6 +621,7 @@ enum { MX6_PAD_LCD_DATA06__GPIO3_IO11 = IOMUX_PAD(0x03BC, 0x0130, 5, 0x0000, 0, 0), MX6_PAD_LCD_DATA06__SRC_BT_CFG06 = IOMUX_PAD(0x03BC, 0x0130, 6, 0x0000, 0, 0), MX6_PAD_LCD_DATA06__ECSPI1_SS2 = IOMUX_PAD(0x03BC, 0x0130, 8, 0x0000, 0, 0), + MX6_PAD_LCD_DATA06__EPDC_SDDO06 = IOMUX_PAD(0x03BC, 0x0130, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA07__LCDIF_DATA07 = IOMUX_PAD(0x03C0, 0x0134, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA07__UART7_DCE_RTS = IOMUX_PAD(0x03C0, 0x0134, 1, 0x0650, 3, 0), @@ -611,6 +631,7 @@ enum { MX6_PAD_LCD_DATA07__GPIO3_IO12 = IOMUX_PAD(0x03C0, 0x0134, 5, 0x0000, 0, 0), MX6_PAD_LCD_DATA07__SRC_BT_CFG07 = IOMUX_PAD(0x03C0, 0x0134, 6, 0x0000, 0, 0), MX6_PAD_LCD_DATA07__ECSPI1_SS3 = IOMUX_PAD(0x03C0, 0x0134, 8, 0x0000, 0, 0), + MX6_PAD_LCD_DATA07__EPDC_SDDO07 = IOMUX_PAD(0x03C0, 0x0134, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA08__LCDIF_DATA08 = IOMUX_PAD(0x03C4, 0x0138, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA08__SPDIF_IN = IOMUX_PAD(0x03C4, 0x0138, 1, 0x0618, 2, 0), @@ -667,6 +688,7 @@ enum { MX6_PAD_LCD_DATA14__GPIO3_IO19 = IOMUX_PAD(0x03DC, 0x0150, 5, 0x0000, 0, 0), MX6_PAD_LCD_DATA14__SRC_BT_CFG14 = IOMUX_PAD(0x03DC, 0x0150, 6, 0x0000, 0, 0), MX6_PAD_LCD_DATA14__USDHC2_DATA4 = IOMUX_PAD(0x03DC, 0x0150, 8, 0x068C, 0, 0), + MX6_PAD_LCD_DATA14__EPDC_SDSHR = IOMUX_PAD(0x03DC, 0x0150, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA15__LCDIF_DATA15 = IOMUX_PAD(0x03E0, 0x0154, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA15__SAI3_TX_DATA = IOMUX_PAD(0x03E0, 0x0154, 1, 0x0000, 0, 0), @@ -675,6 +697,7 @@ enum { MX6_PAD_LCD_DATA15__GPIO3_IO20 = IOMUX_PAD(0x03E0, 0x0154, 5, 0x0000, 0, 0), MX6_PAD_LCD_DATA15__SRC_BT_CFG15 = IOMUX_PAD(0x03E0, 0x0154, 6, 0x0000, 0, 0), MX6_PAD_LCD_DATA15__USDHC2_DATA5 = IOMUX_PAD(0x03E0, 0x0154, 8, 0x0690, 0, 0), + MX6_PAD_LCD_DATA15__EPDC_GDRL = IOMUX_PAD(0x03E0, 0x0154, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA16__LCDIF_DATA16 = IOMUX_PAD(0x03E4, 0x0158, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA16__UART7_DCE_TX = IOMUX_PAD(0x03E4, 0x0158, 1, 0x0000, 0, 0), @@ -684,6 +707,7 @@ enum { MX6_PAD_LCD_DATA16__GPIO3_IO21 = IOMUX_PAD(0x03E4, 0x0158, 5, 0x0000, 0, 0), MX6_PAD_LCD_DATA16__SRC_BT_CFG24 = IOMUX_PAD(0x03E4, 0x0158, 6, 0x0000, 0, 0), MX6_PAD_LCD_DATA16__USDHC2_DATA6 = IOMUX_PAD(0x03E4, 0x0158, 8, 0x0694, 0, 0), + MX6_PAD_LCD_DATA16__EPDC_GDCLK = IOMUX_PAD(0x03E4, 0x0158, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA17__LCDIF_DATA17 = IOMUX_PAD(0x03E8, 0x015C, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA17__UART7_DCE_RX = IOMUX_PAD(0x03E8, 0x015C, 1, 0x0654, 3, 0), @@ -693,6 +717,7 @@ enum { MX6_PAD_LCD_DATA17__GPIO3_IO22 = IOMUX_PAD(0x03E8, 0x015C, 5, 0x0000, 0, 0), MX6_PAD_LCD_DATA17__SRC_BT_CFG25 = IOMUX_PAD(0x03E8, 0x015C, 6, 0x0000, 0, 0), MX6_PAD_LCD_DATA17__USDHC2_DATA7 = IOMUX_PAD(0x03E8, 0x015C, 8, 0x0698, 0, 0), + MX6_PAD_LCD_DATA17__EPDC_GDSP = IOMUX_PAD(0x03E8, 0x015C, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA18__LCDIF_DATA18 = IOMUX_PAD(0x03EC, 0x0160, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA18__PWM5_OUT = IOMUX_PAD(0x03EC, 0x0160, 1, 0x0000, 0, 0), @@ -731,6 +756,7 @@ enum { MX6_PAD_LCD_DATA21__GPIO3_IO26 = IOMUX_PAD(0x03F8, 0x016C, 5, 0x0000, 0, 0), MX6_PAD_LCD_DATA21__SRC_BT_CFG29 = IOMUX_PAD(0x03F8, 0x016C, 6, 0x0000, 0, 0), MX6_PAD_LCD_DATA21__USDHC2_DATA1 = IOMUX_PAD(0x03F8, 0x016C, 8, 0x0680, 1, 0), + MX6_PAD_LCD_DATA21__EPDC_SDCE1 = IOMUX_PAD(0x03F8, 0x016C, 9, 0x0000, 0, 0), MX6_PAD_LCD_DATA22__LCDIF_DATA22 = IOMUX_PAD(0x03FC, 0x0170, 0, 0x0000, 0, 0), MX6_PAD_LCD_DATA22__MQS_RIGHT = IOMUX_PAD(0x03FC, 0x0170, 1, 0x0000, 0, 0), diff --git a/board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c b/board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c index 5b8369e..58c354d 100644 --- a/board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c +++ b/board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c @@ -29,6 +29,10 @@ #include "../common/pfuze.h" #include <usb.h> #include <usb/ehci-fsl.h> +#if defined(CONFIG_MXC_EPDC) +#include <lcd.h> +#include <mxc_epdc_fb.h> +#endif #include <asm/imx-common/video.h> DECLARE_GLOBAL_DATA_PTR; @@ -80,6 +84,8 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define EPDC_PAD_CTRL 0x010b1 + #ifdef CONFIG_SYS_I2C_MXC #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) /* I2C1 for PMIC and EEPROM */ @@ -546,6 +552,216 @@ struct display_info_t const displays[] = {{ size_t display_count = ARRAY_SIZE(displays); #endif +#ifdef CONFIG_MXC_EPDC +static iomux_v3_cfg_t const epdc_enable_pads[] = { + MX6_PAD_ENET2_RX_DATA0__EPDC_SDDO08 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_ENET2_RX_DATA1__EPDC_SDDO09 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_ENET2_RX_EN__EPDC_SDDO10 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_ENET2_TX_DATA0__EPDC_SDDO11 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_ENET2_TX_DATA1__EPDC_SDDO12 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_ENET2_TX_EN__EPDC_SDDO13 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_ENET2_TX_CLK__EPDC_SDDO14 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_ENET2_RX_ER__EPDC_SDDO15 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_CLK__EPDC_SDCLK | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_ENABLE__EPDC_SDLE | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_HSYNC__EPDC_SDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_VSYNC__EPDC_SDCE0 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_DATA00__EPDC_SDDO00 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_DATA01__EPDC_SDDO01 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_DATA02__EPDC_SDDO02 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_DATA03__EPDC_SDDO03 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_DATA04__EPDC_SDDO04 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_DATA05__EPDC_SDDO05 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_DATA06__EPDC_SDDO06 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_DATA07__EPDC_SDDO07 | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_DATA14__EPDC_SDSHR | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_DATA15__EPDC_GDRL | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_DATA16__EPDC_GDCLK | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_DATA17__EPDC_GDSP | MUX_PAD_CTRL(EPDC_PAD_CTRL), + MX6_PAD_LCD_RESET__EPDC_GDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL), +}; + +static iomux_v3_cfg_t const epdc_disable_pads[] = { + MX6_PAD_ENET2_RX_DATA0__GPIO2_IO08, + MX6_PAD_ENET2_RX_DATA1__GPIO2_IO09, + MX6_PAD_ENET2_RX_EN__GPIO2_IO10, + MX6_PAD_ENET2_TX_DATA0__GPIO2_IO11, + MX6_PAD_ENET2_TX_DATA1__GPIO2_IO12, + MX6_PAD_ENET2_TX_EN__GPIO2_IO13, + MX6_PAD_ENET2_TX_CLK__GPIO2_IO14, + MX6_PAD_ENET2_RX_ER__GPIO2_IO15, + MX6_PAD_LCD_CLK__GPIO3_IO00, + MX6_PAD_LCD_ENABLE__GPIO3_IO01, + MX6_PAD_LCD_HSYNC__GPIO3_IO02, + MX6_PAD_LCD_VSYNC__GPIO3_IO03, + MX6_PAD_LCD_DATA00__GPIO3_IO05, + MX6_PAD_LCD_DATA01__GPIO3_IO06, + MX6_PAD_LCD_DATA02__GPIO3_IO07, + MX6_PAD_LCD_DATA03__GPIO3_IO08, + MX6_PAD_LCD_DATA04__GPIO3_IO09, + MX6_PAD_LCD_DATA05__GPIO3_IO10, + MX6_PAD_LCD_DATA06__GPIO3_IO11, + MX6_PAD_LCD_DATA07__GPIO3_IO12, + MX6_PAD_LCD_DATA14__GPIO3_IO19, + MX6_PAD_LCD_DATA15__GPIO3_IO20, + MX6_PAD_LCD_DATA16__GPIO3_IO21, + MX6_PAD_LCD_DATA17__GPIO3_IO22, + MX6_PAD_LCD_RESET__GPIO3_IO04, +}; + +vidinfo_t panel_info = { + .vl_refresh = 85, + .vl_col = 1024, + .vl_row = 758, + .vl_pixclock = 40000000, + .vl_left_margin = 12, + .vl_right_margin = 76, + .vl_upper_margin = 4, + .vl_lower_margin = 5, + .vl_hsync = 12, + .vl_vsync = 2, + .vl_sync = 0, + .vl_mode = 0, + .vl_flag = 0, + .vl_bpix = 3, + .cmap = 0, +}; + +struct epdc_timing_params panel_timings = { + .vscan_holdoff = 4, + .sdoed_width = 10, + .sdoed_delay = 20, + .sdoez_width = 10, + .sdoez_delay = 20, + .gdclk_hp_offs = 524, + .gdsp_offs = 327, + .gdoe_offs = 0, + .gdclk_offs = 19, + .num_ce = 1, +}; + +static void setup_epdc_power(void) +{ + /* Setup epdc voltage */ + + /* EPDC_PWRSTAT - GPIO3[16] for PWR_GOOD status */ + imx_iomux_v3_setup_pad(MX6_PAD_LCD_DATA11__GPIO3_IO16 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + gpio_direction_input(IMX_GPIO_NR(3, 16)); + + /* EPDC_VCOM0 - GPIO3[24] for VCOM control */ + imx_iomux_v3_setup_pad(MX6_PAD_LCD_DATA19__GPIO3_IO24 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + + /* Set as output */ + gpio_direction_output(IMX_GPIO_NR(3, 24), 1); + + /* EPDC_PWRWAKEUP - GPIO3[14] for EPD PMIC WAKEUP */ + imx_iomux_v3_setup_pad(MX6_PAD_LCD_DATA09__GPIO3_IO14 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + /* Set as output */ + gpio_direction_output(IMX_GPIO_NR(3, 14), 1); + + /* EPDC_PWRCTRL0 - GPIO3[17] for EPD PWR CTL0 */ + imx_iomux_v3_setup_pad(MX6_PAD_LCD_DATA12__GPIO3_IO17 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + /* Set as output */ + gpio_direction_output(IMX_GPIO_NR(3, 17), 1); +} + +static void epdc_enable_pins(void) +{ + /* epdc iomux settings */ + imx_iomux_v3_setup_multiple_pads(epdc_enable_pads, + ARRAY_SIZE(epdc_enable_pads)); +} + +static void epdc_disable_pins(void) +{ + /* Configure MUX settings for EPDC pins to GPIO and drive to 0 */ + imx_iomux_v3_setup_multiple_pads(epdc_disable_pads, + ARRAY_SIZE(epdc_disable_pads)); +} + +static void setup_epdc(void) +{ + /*** epdc Maxim PMIC settings ***/ + + /* EPDC_PWRSTAT - GPIO3[16] for PWR_GOOD status */ + imx_iomux_v3_setup_pad(MX6_PAD_LCD_DATA11__GPIO3_IO16 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + + /* EPDC_VCOM0 - GPIO3[24] for VCOM control */ + imx_iomux_v3_setup_pad(MX6_PAD_LCD_DATA19__GPIO3_IO24 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + + /* EPDC_PWRWAKEUP - GPIO3[14] for EPD PMIC WAKEUP */ + imx_iomux_v3_setup_pad(MX6_PAD_LCD_DATA09__GPIO3_IO14 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + + /* EPDC_PWRCTRL0 - GPIO3[17] for EPD PWR CTL0 */ + imx_iomux_v3_setup_pad(MX6_PAD_LCD_DATA12__GPIO3_IO17 | + MUX_PAD_CTRL(EPDC_PAD_CTRL)); + + /* Set pixel clock rates for EPDC in clock.c */ + + panel_info.epdc_data.wv_modes.mode_init = 0; + panel_info.epdc_data.wv_modes.mode_du = 1; + panel_info.epdc_data.wv_modes.mode_gc4 = 3; + panel_info.epdc_data.wv_modes.mode_gc8 = 2; + panel_info.epdc_data.wv_modes.mode_gc16 = 2; + panel_info.epdc_data.wv_modes.mode_gc32 = 2; + + panel_info.epdc_data.epdc_timings = panel_timings; + + setup_epdc_power(); +} + +void epdc_power_on(void) +{ + unsigned int reg; + struct gpio_regs *gpio_regs = (struct gpio_regs *)GPIO3_BASE_ADDR; + + /* Set EPD_PWR_CTL0 to high - enable EINK_VDD (3.15) */ + gpio_set_value(IMX_GPIO_NR(3, 17), 1); + udelay(1000); + + /* Enable epdc signal pin */ + epdc_enable_pins(); + + /* Set PMIC Wakeup to high - enable Display power */ + gpio_set_value(IMX_GPIO_NR(3, 14), 1); + + /* Wait for PWRGOOD == 1 */ + while (1) { + reg = readl(&gpio_regs->gpio_psr); + if (!(reg & (1 << 16))) + break; + + udelay(100); + } + + /* Enable VCOM */ + gpio_set_value(IMX_GPIO_NR(3, 24), 1); + + udelay(500); +} + +void epdc_power_off(void) +{ + /* Set PMIC Wakeup to low - disable Display power */ + gpio_set_value(IMX_GPIO_NR(3, 14), 0); + + /* Disable VCOM */ + gpio_set_value(IMX_GPIO_NR(3, 24), 0); + + epdc_disable_pins(); + + /* Set EPD_PWR_CTL0 to low - disable EINK_VDD (3.15) */ + gpio_set_value(IMX_GPIO_NR(3, 17), 0); +} +#endif + #ifdef CONFIG_FEC_MXC int board_eth_init(bd_t *bis) { @@ -753,6 +969,11 @@ int board_init(void) board_qspi_init(); #endif +#ifdef CONFIG_MXC_EPDC + enable_epdc_clock(); + setup_epdc(); +#endif + return 0; } diff --git a/configs/mx6ull_14x14_ddr3_arm2_epdc_defconfig b/configs/mx6ull_14x14_ddr3_arm2_epdc_defconfig new file mode 100644 index 0000000..e50583d --- /dev/null +++ b/configs/mx6ull_14x14_ddr3_arm2_epdc_defconfig @@ -0,0 +1,5 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6ull_ddr3_arm2/imximage.cfg,MXC_EPDC" +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_TARGET_MX6ULL_DDR3_ARM2=y +CONFIG_CMD_GPIO=y diff --git a/include/configs/mx6ull_ddr3_arm2.h b/include/configs/mx6ull_ddr3_arm2.h index 28562db..9325d33 100644 --- a/include/configs/mx6ull_ddr3_arm2.h +++ b/include/configs/mx6ull_ddr3_arm2.h @@ -87,4 +87,43 @@ #define CONFIG_FEC_DMA_MINALIGN 64 #endif +#ifdef CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_MXS +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_IMX_VIDEO_SKIP +#endif + +/* #define CONFIG_SPLASH_SCREEN*/ +/* #define CONFIG_MXC_EPDC*/ + +/* + * SPLASH SCREEN Configs + */ +#if defined(CONFIG_SPLASH_SCREEN) && defined(CONFIG_MXC_EPDC) +/* + * Framebuffer and LCD + */ +#define CONFIG_CFB_CONSOLE +#define CONFIG_CMD_BMP +#define CONFIG_LCD +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#undef LCD_TEST_PATTERN +/* #define CONFIG_SPLASH_IS_IN_MMC 1 */ +#define LCD_BPP LCD_MONOCHROME +/* #define CONFIG_SPLASH_SCREEN_ALIGN 1 */ + +#define CONFIG_WAVEFORM_BUF_SIZE 0x400000 +#endif + #endif diff --git a/include/mxc_epdc_fb.h b/include/mxc_epdc_fb.h index 33761a7..7594958 100644 --- a/include/mxc_epdc_fb.h +++ b/include/mxc_epdc_fb.h @@ -193,7 +193,7 @@ #define EPDC_PIGEON_16_0 0xC00 #define EPDC_PIGEON_16_1 0xC10 #define EPDC_PIGEON_16_2 0xC20 -#ifdef CONFIG_MX7 +#if defined(CONFIG_MX7) || defined(CONFIG_MX6ULL) #define EPDC_WB_ADDR_TCE 0x010 #else #define EPDC_WB_ADDR_TCE 0xC10 |