diff options
30 files changed, 380 insertions, 311 deletions
diff --git a/board/altera/arria5-socdk/socfpga.c b/board/altera/arria5-socdk/socfpga.c index a1dbc49..0fbbc34 100644 --- a/board/altera/arria5-socdk/socfpga.c +++ b/board/altera/arria5-socdk/socfpga.c @@ -9,7 +9,7 @@ #include <asm/io.h> #include <usb.h> -#include <usb/s3c_udc.h> +#include <usb/dwc2_udc.h> #include <usb_mass_storage.h> #include <micrel.h> @@ -68,14 +68,14 @@ int board_phy_config(struct phy_device *phydev) #endif #ifdef CONFIG_USB_GADGET -struct s3c_plat_otg_data socfpga_otg_data = { +struct dwc2_plat_otg_data socfpga_otg_data = { .regs_otg = CONFIG_USB_DWC2_REG_ADDR, .usb_gusbcfg = 0x1417, }; int board_usb_init(int index, enum usb_init_type init) { - return s3c_udc_probe(&socfpga_otg_data); + return dwc2_udc_probe(&socfpga_otg_data); } int g_dnl_board_usb_cable_connected(void) diff --git a/board/altera/cyclone5-socdk/socfpga.c b/board/altera/cyclone5-socdk/socfpga.c index a1dbc49..0fbbc34 100644 --- a/board/altera/cyclone5-socdk/socfpga.c +++ b/board/altera/cyclone5-socdk/socfpga.c @@ -9,7 +9,7 @@ #include <asm/io.h> #include <usb.h> -#include <usb/s3c_udc.h> +#include <usb/dwc2_udc.h> #include <usb_mass_storage.h> #include <micrel.h> @@ -68,14 +68,14 @@ int board_phy_config(struct phy_device *phydev) #endif #ifdef CONFIG_USB_GADGET -struct s3c_plat_otg_data socfpga_otg_data = { +struct dwc2_plat_otg_data socfpga_otg_data = { .regs_otg = CONFIG_USB_DWC2_REG_ADDR, .usb_gusbcfg = 0x1417, }; int board_usb_init(int index, enum usb_init_type init) { - return s3c_udc_probe(&socfpga_otg_data); + return dwc2_udc_probe(&socfpga_otg_data); } int g_dnl_board_usb_cable_connected(void) diff --git a/board/broadcom/bcm28155_ap/bcm28155_ap.c b/board/broadcom/bcm28155_ap/bcm28155_ap.c index 20eb191..b3a4a41 100644 --- a/board/broadcom/bcm28155_ap/bcm28155_ap.c +++ b/board/broadcom/bcm28155_ap/bcm28155_ap.c @@ -13,7 +13,7 @@ #include <asm/arch/sysmap.h> #include <usb.h> -#include <usb/s3c_udc.h> +#include <usb/dwc2_udc.h> #include <g_dnl.h> #define SECWATCHDOG_SDOGCR_OFFSET 0x00000000 @@ -95,14 +95,14 @@ int board_mmc_init(bd_t *bis) #endif #ifdef CONFIG_USB_GADGET -static struct s3c_plat_otg_data bcm_otg_data = { +static struct dwc2_plat_otg_data bcm_otg_data = { .regs_otg = HSOTG_BASE_ADDR }; int board_usb_init(int index, enum usb_init_type init) { - debug("%s: performing s3c_udc_probe\n", __func__); - return s3c_udc_probe(&bcm_otg_data); + debug("%s: performing dwc2_udc_probe\n", __func__); + return dwc2_udc_probe(&bcm_otg_data); } int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) diff --git a/board/denx/mcvevk/socfpga.c b/board/denx/mcvevk/socfpga.c index 1a23a7d..0f93722 100644 --- a/board/denx/mcvevk/socfpga.c +++ b/board/denx/mcvevk/socfpga.c @@ -9,7 +9,7 @@ #include <asm/io.h> #include <usb.h> -#include <usb/s3c_udc.h> +#include <usb/dwc2_udc.h> #include <usb_mass_storage.h> DECLARE_GLOBAL_DATA_PTR; @@ -28,14 +28,14 @@ int board_init(void) } #ifdef CONFIG_USB_GADGET -struct s3c_plat_otg_data socfpga_otg_data = { +struct dwc2_plat_otg_data socfpga_otg_data = { .regs_otg = CONFIG_USB_DWC2_REG_ADDR, .usb_gusbcfg = 0x1417, }; int board_usb_init(int index, enum usb_init_type init) { - return s3c_udc_probe(&socfpga_otg_data); + return dwc2_udc_probe(&socfpga_otg_data); } int g_dnl_board_usb_cable_connected(void) diff --git a/board/ebv/socrates/socfpga.c b/board/ebv/socrates/socfpga.c index a1dbc49..0fbbc34 100644 --- a/board/ebv/socrates/socfpga.c +++ b/board/ebv/socrates/socfpga.c @@ -9,7 +9,7 @@ #include <asm/io.h> #include <usb.h> -#include <usb/s3c_udc.h> +#include <usb/dwc2_udc.h> #include <usb_mass_storage.h> #include <micrel.h> @@ -68,14 +68,14 @@ int board_phy_config(struct phy_device *phydev) #endif #ifdef CONFIG_USB_GADGET -struct s3c_plat_otg_data socfpga_otg_data = { +struct dwc2_plat_otg_data socfpga_otg_data = { .regs_otg = CONFIG_USB_DWC2_REG_ADDR, .usb_gusbcfg = 0x1417, }; int board_usb_init(int index, enum usb_init_type init) { - return s3c_udc_probe(&socfpga_otg_data); + return dwc2_udc_probe(&socfpga_otg_data); } int g_dnl_board_usb_cable_connected(void) diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index d943d63..1600568 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -10,7 +10,7 @@ #include <asm/gpio.h> #include <asm/arch/mmc.h> #include <power/pmic.h> -#include <usb/s3c_udc.h> +#include <usb/dwc2_udc.h> #include <asm/arch/cpu.h> #include <power/max8998_pmic.h> #include <samsung/misc.h> @@ -183,7 +183,7 @@ static int s5pc1xx_phy_control(int on) return 0; } -struct s3c_plat_otg_data s5pc110_otg_data = { +struct dwc2_plat_otg_data s5pc110_otg_data = { .phy_control = s5pc1xx_phy_control, .regs_phy = S5PC110_PHY_BASE, .regs_otg = S5PC110_OTG_BASE, @@ -193,7 +193,7 @@ struct s3c_plat_otg_data s5pc110_otg_data = { int board_usb_init(int index, enum usb_init_type init) { debug("USB_udc_probe\n"); - return s3c_udc_probe(&s5pc110_otg_data); + return dwc2_udc_probe(&s5pc110_otg_data); } #endif diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c index 36d493d..b4cb332 100644 --- a/board/samsung/odroid/odroid.c +++ b/board/samsung/odroid/odroid.c @@ -19,7 +19,7 @@ #include <errno.h> #include <mmc.h> #include <usb.h> -#include <usb/s3c_udc.h> +#include <usb/dwc2_udc.h> #include <samsung/misc.h> #include "setup.h" @@ -452,7 +452,7 @@ static int s5pc210_phy_control(int on) return regulator_set_mode(dev, OPMODE_LPM); } -struct s3c_plat_otg_data s5pc210_otg_data = { +struct dwc2_plat_otg_data s5pc210_otg_data = { .phy_control = s5pc210_phy_control, .regs_phy = EXYNOS4X12_USBPHY_BASE, .regs_otg = EXYNOS4X12_USBOTG_BASE, @@ -510,6 +510,6 @@ int board_usb_init(int index, enum usb_init_type init) } #endif debug("USB_udc_probe\n"); - return s3c_udc_probe(&s5pc210_otg_data); + return dwc2_udc_probe(&s5pc210_otg_data); } #endif diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index e163e45..54d01ec 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -18,7 +18,7 @@ #include <asm/arch/watchdog.h> #include <asm/arch/power.h> #include <power/pmic.h> -#include <usb/s3c_udc.h> +#include <usb/dwc2_udc.h> #include <power/max8997_pmic.h> #include <power/max8997_muic.h> #include <power/battery.h> @@ -41,7 +41,7 @@ u32 get_board_rev(void) #endif static void check_hw_revision(void); -struct s3c_plat_otg_data s5pc210_otg_data; +struct dwc2_plat_otg_data s5pc210_otg_data; int exynos_init(void) { @@ -419,7 +419,7 @@ static int s5pc210_phy_control(int on) return 0; } -struct s3c_plat_otg_data s5pc210_otg_data = { +struct dwc2_plat_otg_data s5pc210_otg_data = { .phy_control = s5pc210_phy_control, .regs_phy = EXYNOS4_USBPHY_BASE, .regs_otg = EXYNOS4_USBOTG_BASE, @@ -430,7 +430,7 @@ struct s3c_plat_otg_data s5pc210_otg_data = { int board_usb_init(int index, enum usb_init_type init) { debug("USB_udc_probe\n"); - return s3c_udc_probe(&s5pc210_otg_data); + return dwc2_udc_probe(&s5pc210_otg_data); } int g_dnl_board_usb_cable_connected(void) diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c index a737749..7b28ae8 100644 --- a/board/samsung/trats2/trats2.c +++ b/board/samsung/trats2/trats2.c @@ -21,7 +21,7 @@ #include <libtizen.h> #include <errno.h> #include <usb.h> -#include <usb/s3c_udc.h> +#include <usb/dwc2_udc.h> #include <usb_mass_storage.h> DECLARE_GLOBAL_DATA_PTR; @@ -303,7 +303,7 @@ static int s5pc210_phy_control(int on) return 0; } -struct s3c_plat_otg_data s5pc210_otg_data = { +struct dwc2_plat_otg_data s5pc210_otg_data = { .phy_control = s5pc210_phy_control, .regs_phy = EXYNOS4X12_USBPHY_BASE, .regs_otg = EXYNOS4X12_USBOTG_BASE, @@ -314,7 +314,7 @@ struct s3c_plat_otg_data s5pc210_otg_data = { int board_usb_init(int index, enum usb_init_type init) { debug("USB_udc_probe\n"); - return s3c_udc_probe(&s5pc210_otg_data); + return dwc2_udc_probe(&s5pc210_otg_data); } int g_dnl_board_usb_cable_connected(void) diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index df46713..c25b486 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -17,7 +17,7 @@ #include <ld9040.h> #include <power/pmic.h> #include <usb.h> -#include <usb/s3c_udc.h> +#include <usb/dwc2_udc.h> #include <asm/arch/cpu.h> #include <power/max8998_pmic.h> #include <libtizen.h> @@ -179,7 +179,7 @@ static int s5pc210_phy_control(int on) return 0; } -struct s3c_plat_otg_data s5pc210_otg_data = { +struct dwc2_plat_otg_data s5pc210_otg_data = { .phy_control = s5pc210_phy_control, .regs_phy = EXYNOS4_USBPHY_BASE, .regs_otg = EXYNOS4_USBOTG_BASE, @@ -191,7 +191,7 @@ struct s3c_plat_otg_data s5pc210_otg_data = { int board_usb_init(int index, enum usb_init_type init) { debug("USB_udc_probe\n"); - return s3c_udc_probe(&s5pc210_otg_data); + return dwc2_udc_probe(&s5pc210_otg_data); } int exynos_early_init_f(void) diff --git a/board/terasic/sockit/socfpga.c b/board/terasic/sockit/socfpga.c index a1dbc49..0fbbc34 100644 --- a/board/terasic/sockit/socfpga.c +++ b/board/terasic/sockit/socfpga.c @@ -9,7 +9,7 @@ #include <asm/io.h> #include <usb.h> -#include <usb/s3c_udc.h> +#include <usb/dwc2_udc.h> #include <usb_mass_storage.h> #include <micrel.h> @@ -68,14 +68,14 @@ int board_phy_config(struct phy_device *phydev) #endif #ifdef CONFIG_USB_GADGET -struct s3c_plat_otg_data socfpga_otg_data = { +struct dwc2_plat_otg_data socfpga_otg_data = { .regs_otg = CONFIG_USB_DWC2_REG_ADDR, .usb_gusbcfg = 0x1417, }; int board_usb_init(int index, enum usb_init_type init) { - return s3c_udc_probe(&socfpga_otg_data); + return dwc2_udc_probe(&socfpga_otg_data); } int g_dnl_board_usb_cable_connected(void) diff --git a/common/usb_kbd.c b/common/usb_kbd.c index 069fbd2..9617a48 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -476,6 +476,9 @@ static int usb_kbd_probe_dev(struct usb_device *dev, unsigned int ifnum) USB_KBD_BOOT_REPORT_SIZE, data->new, data->intinterval); if (!data->intq) { +#elif defined(CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP) + if (usb_get_report(dev, iface->desc.bInterfaceNumber, + 1, 0, data->new, USB_KBD_BOOT_REPORT_SIZE) < 0) { #else if (usb_submit_int_msg(dev, data->intpipe, data->new, data->intpktsize, data->intinterval) < 0) { diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6288ecf..c915c79 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -13,8 +13,8 @@ ifdef CONFIG_USB_GADGET obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o -obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o -obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG_PHY) += s3c_udc_otg_phy.o +obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o +obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o obj-$(CONFIG_CI_UDC) += ci_udc.o obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o diff --git a/drivers/usb/gadget/bcm_udc_otg_phy.c b/drivers/usb/gadget/bcm_udc_otg_phy.c index f8690b0..10b2e13 100644 --- a/drivers/usb/gadget/bcm_udc_otg_phy.c +++ b/drivers/usb/gadget/bcm_udc_otg_phy.c @@ -9,10 +9,10 @@ #include <asm/io.h> #include <asm/arch/sysmap.h> -#include <usb/s3c_udc.h> +#include "dwc2_udc_otg_priv.h" #include "bcm_udc_otg.h" -void otg_phy_init(struct s3c_udc *dev) +void otg_phy_init(struct dwc2_udc *dev) { /* set Phy to driving mode */ wfld_clear(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET, @@ -37,7 +37,7 @@ void otg_phy_init(struct s3c_udc *dev) HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK); } -void otg_phy_off(struct s3c_udc *dev) +void otg_phy_off(struct dwc2_udc *dev) { /* Soft Disconnect */ wfld_set(HSOTG_BASE_ADDR + HSOTG_DCTL_OFFSET, diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/dwc2_udc_otg.c index 7a2d1e7..ffe2952 100644 --- a/drivers/usb/gadget/s3c_udc_otg.c +++ b/drivers/usb/gadget/dwc2_udc_otg.c @@ -1,6 +1,6 @@ /* - * drivers/usb/gadget/s3c_udc_otg.c - * Samsung S3C on-chip full/high speed USB OTG 2.0 device controllers + * drivers/usb/gadget/dwc2_udc_otg.c + * Designware DWC2 on-chip full/high speed USB OTG 2.0 device controllers * * Copyright (C) 2008 for Samsung Electronics * @@ -32,7 +32,8 @@ #include <asm/mach-types.h> -#include "regs-otg.h" +#include "dwc2_udc_otg_regs.h" +#include "dwc2_udc_otg_priv.h" #include <usb/lin_gadget_compat.h> /***********************************************************/ @@ -45,7 +46,7 @@ #define DEBUG_OUT_EP 0 #define DEBUG_IN_EP 0 -#include <usb/s3c_udc.h> +#include <usb/dwc2_udc.h> #define EP0_CON 0 #define EP_MASK 0xF @@ -62,12 +63,12 @@ static char *state_names[] = { "WAIT_FOR_NULL_COMPLETE", }; -#define DRIVER_DESC "S3C HS USB OTG Device Driver, (c) Samsung Electronics" +#define DRIVER_DESC "DWC2 HS USB OTG Device Driver, (c) Samsung Electronics" #define DRIVER_VERSION "15 March 2009" -struct s3c_udc *the_controller; +struct dwc2_udc *the_controller; -static const char driver_name[] = "s3c-udc"; +static const char driver_name[] = "dwc2-udc"; static const char driver_desc[] = DRIVER_DESC; static const char ep0name[] = "ep0-control"; @@ -83,32 +84,32 @@ static dma_addr_t usb_ctrl_dma_addr; /* Local declarations. */ -static int s3c_ep_enable(struct usb_ep *ep, +static int dwc2_ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *); -static int s3c_ep_disable(struct usb_ep *ep); -static struct usb_request *s3c_alloc_request(struct usb_ep *ep, +static int dwc2_ep_disable(struct usb_ep *ep); +static struct usb_request *dwc2_alloc_request(struct usb_ep *ep, gfp_t gfp_flags); -static void s3c_free_request(struct usb_ep *ep, struct usb_request *); - -static int s3c_queue(struct usb_ep *ep, struct usb_request *, gfp_t gfp_flags); -static int s3c_dequeue(struct usb_ep *ep, struct usb_request *); -static int s3c_fifo_status(struct usb_ep *ep); -static void s3c_fifo_flush(struct usb_ep *ep); -static void s3c_ep0_read(struct s3c_udc *dev); -static void s3c_ep0_kick(struct s3c_udc *dev, struct s3c_ep *ep); -static void s3c_handle_ep0(struct s3c_udc *dev); -static int s3c_ep0_write(struct s3c_udc *dev); -static int write_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req); -static void done(struct s3c_ep *ep, struct s3c_request *req, int status); -static void stop_activity(struct s3c_udc *dev, +static void dwc2_free_request(struct usb_ep *ep, struct usb_request *); + +static int dwc2_queue(struct usb_ep *ep, struct usb_request *, gfp_t gfp_flags); +static int dwc2_dequeue(struct usb_ep *ep, struct usb_request *); +static int dwc2_fifo_status(struct usb_ep *ep); +static void dwc2_fifo_flush(struct usb_ep *ep); +static void dwc2_ep0_read(struct dwc2_udc *dev); +static void dwc2_ep0_kick(struct dwc2_udc *dev, struct dwc2_ep *ep); +static void dwc2_handle_ep0(struct dwc2_udc *dev); +static int dwc2_ep0_write(struct dwc2_udc *dev); +static int write_fifo_ep0(struct dwc2_ep *ep, struct dwc2_request *req); +static void done(struct dwc2_ep *ep, struct dwc2_request *req, int status); +static void stop_activity(struct dwc2_udc *dev, struct usb_gadget_driver *driver); -static int udc_enable(struct s3c_udc *dev); -static void udc_set_address(struct s3c_udc *dev, unsigned char address); -static void reconfig_usbd(struct s3c_udc *dev); -static void set_max_pktsize(struct s3c_udc *dev, enum usb_device_speed speed); -static void nuke(struct s3c_ep *ep, int status); -static int s3c_udc_set_halt(struct usb_ep *_ep, int value); -static void s3c_udc_set_nak(struct s3c_ep *ep); +static int udc_enable(struct dwc2_udc *dev); +static void udc_set_address(struct dwc2_udc *dev, unsigned char address); +static void reconfig_usbd(struct dwc2_udc *dev); +static void set_max_pktsize(struct dwc2_udc *dev, enum usb_device_speed speed); +static void nuke(struct dwc2_ep *ep, int status); +static int dwc2_udc_set_halt(struct usb_ep *_ep, int value); +static void dwc2_udc_set_nak(struct dwc2_ep *ep); void set_udc_gadget_private_data(void *p) { @@ -123,19 +124,19 @@ void *get_udc_gadget_private_data(struct usb_gadget *gadget) return gadget->dev.device_data; } -static struct usb_ep_ops s3c_ep_ops = { - .enable = s3c_ep_enable, - .disable = s3c_ep_disable, +static struct usb_ep_ops dwc2_ep_ops = { + .enable = dwc2_ep_enable, + .disable = dwc2_ep_disable, - .alloc_request = s3c_alloc_request, - .free_request = s3c_free_request, + .alloc_request = dwc2_alloc_request, + .free_request = dwc2_free_request, - .queue = s3c_queue, - .dequeue = s3c_dequeue, + .queue = dwc2_queue, + .dequeue = dwc2_dequeue, - .set_halt = s3c_udc_set_halt, - .fifo_status = s3c_fifo_status, - .fifo_flush = s3c_fifo_flush, + .set_halt = dwc2_udc_set_halt, + .fifo_status = dwc2_fifo_status, + .fifo_flush = dwc2_fifo_flush, }; #define create_proc_files() do {} while (0) @@ -144,24 +145,24 @@ static struct usb_ep_ops s3c_ep_ops = { /***********************************************************/ void __iomem *regs_otg; -struct s3c_usbotg_reg *reg; +struct dwc2_usbotg_reg *reg; bool dfu_usb_get_reset(void) { return !!(readl(®->gintsts) & INT_RESET); } -__weak void otg_phy_init(struct s3c_udc *dev) {} -__weak void otg_phy_off(struct s3c_udc *dev) {} +__weak void otg_phy_init(struct dwc2_udc *dev) {} +__weak void otg_phy_off(struct dwc2_udc *dev) {} /***********************************************************/ -#include "s3c_udc_otg_xfer_dma.c" +#include "dwc2_udc_otg_xfer_dma.c" /* * udc_disable - disable USB device controller */ -static void udc_disable(struct s3c_udc *dev) +static void udc_disable(struct dwc2_udc *dev) { debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev); @@ -177,7 +178,7 @@ static void udc_disable(struct s3c_udc *dev) /* * udc_reinit - initialize software state */ -static void udc_reinit(struct s3c_udc *dev) +static void udc_reinit(struct dwc2_udc *dev) { unsigned int i; @@ -189,8 +190,8 @@ static void udc_reinit(struct s3c_udc *dev) dev->ep0state = WAIT_FOR_SETUP; /* basic endpoint records init */ - for (i = 0; i < S3C_MAX_ENDPOINTS; i++) { - struct s3c_ep *ep = &dev->ep[i]; + for (i = 0; i < DWC2_MAX_ENDPOINTS; i++) { + struct dwc2_ep *ep = &dev->ep[i]; if (i != 0) list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); @@ -210,7 +211,7 @@ static void udc_reinit(struct s3c_udc *dev) /* until it's enabled, this UDC should be completely invisible * to any USB host. */ -static int udc_enable(struct s3c_udc *dev) +static int udc_enable(struct dwc2_udc *dev) { debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev); @@ -218,7 +219,7 @@ static int udc_enable(struct s3c_udc *dev) reconfig_usbd(dev); debug_cond(DEBUG_SETUP != 0, - "S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n", + "DWC2 USB 2.0 OTG Controller Core Initialized : 0x%x\n", readl(®->gintmsk)); dev->gadget.speed = USB_SPEED_UNKNOWN; @@ -231,7 +232,7 @@ static int udc_enable(struct s3c_udc *dev) */ int usb_gadget_register_driver(struct usb_gadget_driver *driver) { - struct s3c_udc *dev = the_controller; + struct dwc2_udc *dev = the_controller; int retval = 0; unsigned long flags = 0; @@ -280,7 +281,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) */ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) { - struct s3c_udc *dev = the_controller; + struct dwc2_udc *dev = the_controller; unsigned long flags = 0; if (!dev) @@ -304,7 +305,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) /* * done - retire a request; caller blocked irqs */ -static void done(struct s3c_ep *ep, struct s3c_request *req, int status) +static void done(struct dwc2_ep *ep, struct dwc2_request *req, int status) { unsigned int stopped = ep->stopped; @@ -355,20 +356,20 @@ static void done(struct s3c_ep *ep, struct s3c_request *req, int status) /* * nuke - dequeue ALL requests */ -static void nuke(struct s3c_ep *ep, int status) +static void nuke(struct dwc2_ep *ep, int status) { - struct s3c_request *req; + struct dwc2_request *req; debug("%s: %s %p\n", __func__, ep->ep.name, ep); /* called with irqs blocked */ while (!list_empty(&ep->queue)) { - req = list_entry(ep->queue.next, struct s3c_request, queue); + req = list_entry(ep->queue.next, struct dwc2_request, queue); done(ep, req, status); } } -static void stop_activity(struct s3c_udc *dev, +static void stop_activity(struct dwc2_udc *dev, struct usb_gadget_driver *driver) { int i; @@ -379,8 +380,8 @@ static void stop_activity(struct s3c_udc *dev, dev->gadget.speed = USB_SPEED_UNKNOWN; /* prevent new request submissions, kill any outstanding requests */ - for (i = 0; i < S3C_MAX_ENDPOINTS; i++) { - struct s3c_ep *ep = &dev->ep[i]; + for (i = 0; i < DWC2_MAX_ENDPOINTS; i++) { + struct dwc2_ep *ep = &dev->ep[i]; ep->stopped = 1; nuke(ep, -ESHUTDOWN); } @@ -396,7 +397,7 @@ static void stop_activity(struct s3c_udc *dev, udc_reinit(dev); } -static void reconfig_usbd(struct s3c_udc *dev) +static void reconfig_usbd(struct dwc2_udc *dev) { /* 2. Soft-reset OTG Core and then unreset again. */ int i; @@ -447,7 +448,7 @@ static void reconfig_usbd(struct s3c_udc *dev) writel(DEPCTL_EPDIS|DEPCTL_SNAK, ®->out_endp[EP0_CON].doepctl); writel(DEPCTL_EPDIS|DEPCTL_SNAK, ®->in_endp[EP0_CON].diepctl); - for (i = 1; i < S3C_MAX_ENDPOINTS; i++) { + for (i = 1; i < DWC2_MAX_ENDPOINTS; i++) { writel(DEPCTL_EPDIS|DEPCTL_SNAK, ®->out_endp[i].doepctl); writel(DEPCTL_EPDIS|DEPCTL_SNAK, ®->in_endp[i].diepctl); } @@ -469,7 +470,7 @@ static void reconfig_usbd(struct s3c_udc *dev) writel((NPTX_FIFO_SIZE >> 2) << 16 | ((RX_FIFO_SIZE >> 2)) << 0, ®->gnptxfsiz); - for (i = 1; i < S3C_MAX_HW_ENDPOINTS; i++) + for (i = 1; i < DWC2_MAX_HW_ENDPOINTS; i++) writel((PTX_FIFO_SIZE >> 2) << 16 | ((RX_FIFO_SIZE + NPTX_FIFO_SIZE + PTX_FIFO_SIZE*(i-1)) >> 2) << 0, @@ -478,13 +479,13 @@ static void reconfig_usbd(struct s3c_udc *dev) /* Flush the RX FIFO */ writel(RX_FIFO_FLUSH, ®->grstctl); while (readl(®->grstctl) & RX_FIFO_FLUSH) - debug("%s: waiting for S3C_UDC_OTG_GRSTCTL\n", __func__); + debug("%s: waiting for DWC2_UDC_OTG_GRSTCTL\n", __func__); /* Flush all the Tx FIFO's */ writel(TX_FIFO_FLUSH_ALL, ®->grstctl); writel(TX_FIFO_FLUSH_ALL | TX_FIFO_FLUSH, ®->grstctl); while (readl(®->grstctl) & TX_FIFO_FLUSH) - debug("%s: waiting for S3C_UDC_OTG_GRSTCTL\n", __func__); + debug("%s: waiting for DWC2_UDC_OTG_GRSTCTL\n", __func__); /* 13. Clear NAK bit of EP0, EP1, EP2*/ /* For Slave mode*/ @@ -496,7 +497,7 @@ static void reconfig_usbd(struct s3c_udc *dev) writel(GAHBCFG_INIT, ®->gahbcfg); } -static void set_max_pktsize(struct s3c_udc *dev, enum usb_device_speed speed) +static void set_max_pktsize(struct dwc2_udc *dev, enum usb_device_speed speed) { unsigned int ep_ctrl; int i; @@ -514,7 +515,7 @@ static void set_max_pktsize(struct s3c_udc *dev, enum usb_device_speed speed) } dev->ep[0].ep.maxpacket = ep0_fifo_size; - for (i = 1; i < S3C_MAX_ENDPOINTS; i++) + for (i = 1; i < DWC2_MAX_ENDPOINTS; i++) dev->ep[i].ep.maxpacket = ep_fifo_size; /* EP0 - Control IN (64 bytes)*/ @@ -526,16 +527,16 @@ static void set_max_pktsize(struct s3c_udc *dev, enum usb_device_speed speed) writel(ep_ctrl|(0<<0), ®->out_endp[EP0_CON].doepctl); } -static int s3c_ep_enable(struct usb_ep *_ep, +static int dwc2_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) { - struct s3c_ep *ep; - struct s3c_udc *dev; + struct dwc2_ep *ep; + struct dwc2_udc *dev; unsigned long flags = 0; debug("%s: %p\n", __func__, _ep); - ep = container_of(_ep, struct s3c_ep, ep); + ep = container_of(_ep, struct dwc2_ep, ep); if (!_ep || !desc || ep->desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress @@ -577,11 +578,11 @@ static int s3c_ep_enable(struct usb_ep *_ep, ep->ep.maxpacket = le16_to_cpu(get_unaligned(&desc->wMaxPacketSize)); /* Reset halt state */ - s3c_udc_set_nak(ep); - s3c_udc_set_halt(_ep, 0); + dwc2_udc_set_nak(ep); + dwc2_udc_set_halt(_ep, 0); spin_lock_irqsave(&ep->dev->lock, flags); - s3c_udc_ep_activate(ep); + dwc2_udc_ep_activate(ep); spin_unlock_irqrestore(&ep->dev->lock, flags); debug("%s: enabled %s, stopped = %d, maxpacket = %d\n", @@ -592,14 +593,14 @@ static int s3c_ep_enable(struct usb_ep *_ep, /* * Disable EP */ -static int s3c_ep_disable(struct usb_ep *_ep) +static int dwc2_ep_disable(struct usb_ep *_ep) { - struct s3c_ep *ep; + struct dwc2_ep *ep; unsigned long flags = 0; debug("%s: %p\n", __func__, _ep); - ep = container_of(_ep, struct s3c_ep, ep); + ep = container_of(_ep, struct dwc2_ep, ep); if (!_ep || !ep->desc) { debug("%s: %s not enabled\n", __func__, _ep ? ep->ep.name : NULL); @@ -620,10 +621,10 @@ static int s3c_ep_disable(struct usb_ep *_ep) return 0; } -static struct usb_request *s3c_alloc_request(struct usb_ep *ep, +static struct usb_request *dwc2_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) { - struct s3c_request *req; + struct dwc2_request *req; debug("%s: %s %p\n", __func__, ep->name, ep); @@ -637,27 +638,27 @@ static struct usb_request *s3c_alloc_request(struct usb_ep *ep, return &req->req; } -static void s3c_free_request(struct usb_ep *ep, struct usb_request *_req) +static void dwc2_free_request(struct usb_ep *ep, struct usb_request *_req) { - struct s3c_request *req; + struct dwc2_request *req; debug("%s: %p\n", __func__, ep); - req = container_of(_req, struct s3c_request, req); + req = container_of(_req, struct dwc2_request, req); WARN_ON(!list_empty(&req->queue)); kfree(req); } /* dequeue JUST ONE request */ -static int s3c_dequeue(struct usb_ep *_ep, struct usb_request *_req) +static int dwc2_dequeue(struct usb_ep *_ep, struct usb_request *_req) { - struct s3c_ep *ep; - struct s3c_request *req; + struct dwc2_ep *ep; + struct dwc2_request *req; unsigned long flags = 0; debug("%s: %p\n", __func__, _ep); - ep = container_of(_ep, struct s3c_ep, ep); + ep = container_of(_ep, struct dwc2_ep, ep); if (!_ep || ep->ep.name == ep0name) return -EINVAL; @@ -682,12 +683,12 @@ static int s3c_dequeue(struct usb_ep *_ep, struct usb_request *_req) /* * Return bytes in EP FIFO */ -static int s3c_fifo_status(struct usb_ep *_ep) +static int dwc2_fifo_status(struct usb_ep *_ep) { int count = 0; - struct s3c_ep *ep; + struct dwc2_ep *ep; - ep = container_of(_ep, struct s3c_ep, ep); + ep = container_of(_ep, struct dwc2_ep, ep); if (!_ep) { debug("%s: bad ep\n", __func__); return -ENODEV; @@ -705,11 +706,11 @@ static int s3c_fifo_status(struct usb_ep *_ep) /* * Flush EP FIFO */ -static void s3c_fifo_flush(struct usb_ep *_ep) +static void dwc2_fifo_flush(struct usb_ep *_ep) { - struct s3c_ep *ep; + struct dwc2_ep *ep; - ep = container_of(_ep, struct s3c_ep, ep); + ep = container_of(_ep, struct dwc2_ep, ep); if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { debug("%s: bad ep\n", __func__); return; @@ -718,14 +719,14 @@ static void s3c_fifo_flush(struct usb_ep *_ep) debug("%s: %d\n", __func__, ep_index(ep)); } -static const struct usb_gadget_ops s3c_udc_ops = { +static const struct usb_gadget_ops dwc2_udc_ops = { /* current versions must always be self-powered */ }; -static struct s3c_udc memory = { +static struct dwc2_udc memory = { .usb_address = 0, .gadget = { - .ops = &s3c_udc_ops, + .ops = &dwc2_udc_ops, .ep0 = &memory.ep[0].ep, .name = driver_name, }, @@ -734,7 +735,7 @@ static struct s3c_udc memory = { .ep[0] = { .ep = { .name = ep0name, - .ops = &s3c_ep_ops, + .ops = &dwc2_ep_ops, .maxpacket = EP0_FIFO_SIZE, }, .dev = &memory, @@ -749,7 +750,7 @@ static struct s3c_udc memory = { .ep[1] = { .ep = { .name = "ep1in-bulk", - .ops = &s3c_ep_ops, + .ops = &dwc2_ep_ops, .maxpacket = EP_FIFO_SIZE, }, .dev = &memory, @@ -764,7 +765,7 @@ static struct s3c_udc memory = { .ep[2] = { .ep = { .name = "ep2out-bulk", - .ops = &s3c_ep_ops, + .ops = &dwc2_ep_ops, .maxpacket = EP_FIFO_SIZE, }, .dev = &memory, @@ -779,7 +780,7 @@ static struct s3c_udc memory = { .ep[3] = { .ep = { .name = "ep3in-int", - .ops = &s3c_ep_ops, + .ops = &dwc2_ep_ops, .maxpacket = EP_FIFO_SIZE, }, .dev = &memory, @@ -796,16 +797,16 @@ static struct s3c_udc memory = { * probe - binds to the platform device */ -int s3c_udc_probe(struct s3c_plat_otg_data *pdata) +int dwc2_udc_probe(struct dwc2_plat_otg_data *pdata) { - struct s3c_udc *dev = &memory; + struct dwc2_udc *dev = &memory; int retval = 0; debug("%s: %p\n", __func__, pdata); dev->pdata = pdata; - reg = (struct s3c_usbotg_reg *)pdata->regs_otg; + reg = (struct dwc2_usbotg_reg *)pdata->regs_otg; /* regs_otg = (void *)pdata->regs_otg; */ @@ -839,6 +840,6 @@ int usb_gadget_handle_interrupts(int index) u32 gintmsk = readl(®->gintmsk); if (intr_status & gintmsk) - return s3c_udc_irq(1, (void *)the_controller); + return dwc2_udc_irq(1, (void *)the_controller); return 0; } diff --git a/drivers/usb/gadget/s3c_udc_otg_phy.c b/drivers/usb/gadget/dwc2_udc_otg_phy.c index f13cb89..e0cbbc0 100644 --- a/drivers/usb/gadget/s3c_udc_otg_phy.c +++ b/drivers/usb/gadget/dwc2_udc_otg_phy.c @@ -1,6 +1,6 @@ /* - * drivers/usb/gadget/s3c_udc_otg.c - * Samsung S3C on-chip full/high speed USB OTG 2.0 device controllers + * drivers/usb/gadget/dwc2_udc_otg.c + * Designware DWC2 on-chip full/high speed USB OTG 2.0 device controllers * * Copyright (C) 2008 for Samsung Electronics * @@ -32,16 +32,17 @@ #include <asm/mach-types.h> -#include "regs-otg.h" +#include "dwc2_udc_otg_regs.h" +#include "dwc2_udc_otg_priv.h" #include <usb/lin_gadget_compat.h> -#include <usb/s3c_udc.h> +#include <usb/dwc2_udc.h> -void otg_phy_init(struct s3c_udc *dev) +void otg_phy_init(struct dwc2_udc *dev) { unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl; - struct s3c_usbotg_phy *phy = - (struct s3c_usbotg_phy *)dev->pdata->regs_phy; + struct dwc2_usbotg_phy *phy = + (struct dwc2_usbotg_phy *)dev->pdata->regs_phy; dev->pdata->phy_control(1); @@ -75,11 +76,11 @@ void otg_phy_init(struct s3c_udc *dev) udelay(10); } -void otg_phy_off(struct s3c_udc *dev) +void otg_phy_off(struct dwc2_udc *dev) { unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl; - struct s3c_usbotg_phy *phy = - (struct s3c_usbotg_phy *)dev->pdata->regs_phy; + struct dwc2_usbotg_phy *phy = + (struct dwc2_usbotg_phy *)dev->pdata->regs_phy; /* reset controller just in case */ writel(PHY_SW_RST0, &phy->rstcon); diff --git a/include/usb/s3c_udc.h b/drivers/usb/gadget/dwc2_udc_otg_priv.h index 7f49a4e..b2c1fc4 100644 --- a/include/usb/s3c_udc.h +++ b/drivers/usb/gadget/dwc2_udc_otg_priv.h @@ -1,13 +1,12 @@ /* - * drivers/usb/gadget/s3c_udc.h - * Samsung S3C on-chip full/high speed USB device controllers + * Designware DWC2 on-chip full/high speed USB device controllers * Copyright (C) 2005 for Samsung Electronics * * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __S3C_USB_GADGET -#define __S3C_USB_GADGET +#ifndef __DWC2_UDC_OTG_PRIV__ +#define __DWC2_UDC_OTG_PRIV__ #include <asm/errno.h> #include <linux/sizes.h> @@ -15,8 +14,7 @@ #include <linux/usb/gadget.h> #include <linux/list.h> #include <usb/lin_gadget_compat.h> - -#define PHY0_SLEEP (1 << 5) +#include <usb/dwc2_udc.h> /*-------------------------------------------------------------------------*/ /* DMA bounce buffer size, 16K is enough even for mass storage */ @@ -26,8 +24,8 @@ #define EP_FIFO_SIZE 512 #define EP_FIFO_SIZE2 1024 /* ep0-control, ep1in-bulk, ep2out-bulk, ep3in-int */ -#define S3C_MAX_ENDPOINTS 4 -#define S3C_MAX_HW_ENDPOINTS 16 +#define DWC2_MAX_ENDPOINTS 4 +#define DWC2_MAX_HW_ENDPOINTS 16 #define WAIT_FOR_SETUP 0 #define DATA_STATE_XMIT 1 @@ -53,9 +51,9 @@ enum ep_type { ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt }; -struct s3c_ep { +struct dwc2_ep { struct usb_ep ep; - struct s3c_udc *dev; + struct dwc2_udc *dev; const struct usb_endpoint_descriptor *desc; struct list_head queue; @@ -71,43 +69,30 @@ struct s3c_ep { int fifo_num; }; -struct s3c_request { +struct dwc2_request { struct usb_request req; struct list_head queue; }; -struct s3c_udc { +struct dwc2_udc { struct usb_gadget gadget; struct usb_gadget_driver *driver; - struct s3c_plat_otg_data *pdata; + struct dwc2_plat_otg_data *pdata; int ep0state; - struct s3c_ep ep[S3C_MAX_ENDPOINTS]; + struct dwc2_ep ep[DWC2_MAX_ENDPOINTS]; unsigned char usb_address; unsigned req_pending:1, req_std:1; }; -extern struct s3c_udc *the_controller; - #define ep_is_in(EP) (((EP)->bEndpointAddress&USB_DIR_IN) == USB_DIR_IN) #define ep_index(EP) ((EP)->bEndpointAddress&0xF) #define ep_maxpacket(EP) ((EP)->ep.maxpacket) -extern void otg_phy_init(struct s3c_udc *dev); -extern void otg_phy_off(struct s3c_udc *dev); +void otg_phy_init(struct dwc2_udc *dev); +void otg_phy_off(struct dwc2_udc *dev); -extern void s3c_udc_ep_set_stall(struct s3c_ep *ep); -extern int s3c_udc_probe(struct s3c_plat_otg_data *pdata); - -struct s3c_plat_otg_data { - int (*phy_control)(int on); - unsigned int regs_phy; - unsigned int regs_otg; - unsigned int usb_phy_ctrl; - unsigned int usb_flags; - unsigned int usb_gusbcfg; -}; -#endif +#endif /* __DWC2_UDC_OTG_PRIV__ */ diff --git a/drivers/usb/gadget/regs-otg.h b/drivers/usb/gadget/dwc2_udc_otg_regs.h index ac5d112..78ec90e 100644 --- a/drivers/usb/gadget/regs-otg.h +++ b/drivers/usb/gadget/dwc2_udc_otg_regs.h @@ -12,14 +12,14 @@ #define __ASM_ARCH_REGS_USB_OTG_HS_H /* USB2.0 OTG Controller register */ -struct s3c_usbotg_phy { +struct dwc2_usbotg_phy { u32 phypwr; u32 phyclk; u32 rstcon; }; /* Device Logical IN Endpoint-Specific Registers */ -struct s3c_dev_in_endp { +struct dwc2_dev_in_endp { u32 diepctl; u8 res1[4]; u32 diepint; @@ -31,7 +31,7 @@ struct s3c_dev_in_endp { }; /* Device Logical OUT Endpoint-Specific Registers */ -struct s3c_dev_out_endp { +struct dwc2_dev_out_endp { u32 doepctl; u8 res1[4]; u32 doepint; @@ -48,7 +48,7 @@ struct ep_fifo { }; /* USB2.0 OTG Controller register */ -struct s3c_usbotg_reg { +struct dwc2_usbotg_reg { /* Core Global Registers */ u32 gotgctl; /* OTG Control & Status */ u32 gotgint; /* OTG Interrupt */ @@ -74,8 +74,8 @@ struct s3c_usbotg_reg { u32 daint; /* Device All Endpoints Interrupt */ u32 daintmsk; /* Device All Endpoints Interrupt Mask */ u8 res4[224]; - struct s3c_dev_in_endp in_endp[16]; - struct s3c_dev_out_endp out_endp[16]; + struct dwc2_dev_in_endp in_endp[16]; + struct dwc2_dev_out_endp out_endp[16]; u8 res5[768]; struct ep_fifo ep[16]; }; @@ -83,11 +83,11 @@ struct s3c_usbotg_reg { /*===================================================================== */ /*definitions related to CSR setting */ -/* S3C_UDC_OTG_GOTGCTL */ +/* DWC2_UDC_OTG_GOTGCTL */ #define B_SESSION_VALID (0x1<<19) #define A_SESSION_VALID (0x1<<18) -/* S3C_UDC_OTG_GAHBCFG */ +/* DWC2_UDC_OTG_GAHBCFG */ #define PTXFE_HALF (0<<8) #define PTXFE_ZERO (1<<8) #define NPTXFE_HALF (0<<7) @@ -102,11 +102,11 @@ struct s3c_usbotg_reg { #define GBL_INT_UNMASK (1<<0) #define GBL_INT_MASK (0<<0) -/* S3C_UDC_OTG_GRSTCTL */ +/* DWC2_UDC_OTG_GRSTCTL */ #define AHB_MASTER_IDLE (1u<<31) #define CORE_SOFT_RESET (0x1<<0) -/* S3C_UDC_OTG_GINTSTS/S3C_UDC_OTG_GINTMSK core interrupt register */ +/* DWC2_UDC_OTG_GINTSTS/DWC2_UDC_OTG_GINTMSK core interrupt register */ #define INT_RESUME (1u<<31) #define INT_DISCONN (0x1<<29) #define INT_CONN_ID_STS_CNG (0x1<<28) @@ -146,22 +146,22 @@ struct s3c_usbotg_reg { #define USB_LOW_6MHZ (0x2<<1) #define USB_FULL_48MHZ (0x3<<1) -/* S3C_UDC_OTG_GRXSTSP STATUS */ +/* DWC2_UDC_OTG_GRXSTSP STATUS */ #define OUT_PKT_RECEIVED (0x2<<17) #define OUT_TRANSFER_COMPLELTED (0x3<<17) #define SETUP_TRANSACTION_COMPLETED (0x4<<17) #define SETUP_PKT_RECEIVED (0x6<<17) #define GLOBAL_OUT_NAK (0x1<<17) -/* S3C_UDC_OTG_DCTL device control register */ +/* DWC2_UDC_OTG_DCTL device control register */ #define NORMAL_OPERATION (0x1<<0) #define SOFT_DISCONNECT (0x1<<1) -/* S3C_UDC_OTG_DAINT device all endpoint interrupt register */ +/* DWC2_UDC_OTG_DAINT device all endpoint interrupt register */ #define DAINT_OUT_BIT (16) #define DAINT_MASK (0xFFFF) -/* S3C_UDC_OTG_DIEPCTL0/DOEPCTL0 device +/* DWC2_UDC_OTG_DIEPCTL0/DOEPCTL0 device control IN/OUT endpoint 0 control register */ #define DEPCTL_EPENA (0x1<<31) #define DEPCTL_EPDIS (0x1<<30) @@ -191,9 +191,9 @@ struct s3c_usbotg_reg { #define DIEPCTL0_NEXT_EP_BIT (11) -/* S3C_UDC_OTG_DIEPMSK/DOEPMSK device IN/OUT endpoint +/* DWC2_UDC_OTG_DIEPMSK/DOEPMSK device IN/OUT endpoint common interrupt mask register */ -/* S3C_UDC_OTG_DIEPINTn/DOEPINTn device IN/OUT endpoint interrupt register */ +/* DWC2_UDC_OTG_DIEPINTn/DOEPINTn device IN/OUT endpoint interrupt register */ #define BACK2BACK_SETUP_RECEIVED (0x1<<6) #define INTKNEPMIS (0x1<<5) #define INTKN_TXFEMP (0x1<<4) diff --git a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c index 7e7a2c2..bce9c30 100644 --- a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c +++ b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c @@ -1,6 +1,6 @@ /* - * drivers/usb/gadget/s3c_udc_otg_xfer_dma.c - * Samsung S3C on-chip full/high speed USB OTG 2.0 device controllers + * drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c + * Designware DWC2 on-chip full/high speed USB OTG 2.0 device controllers * * Copyright (C) 2009 for Samsung Electronics * @@ -25,7 +25,7 @@ int clear_feature_flag; #define GET_MAX_LUN_REQUEST 0xFE #define BOT_RESET_REQUEST 0xFF -static inline void s3c_udc_ep0_zlp(struct s3c_udc *dev) +static inline void dwc2_udc_ep0_zlp(struct dwc2_udc *dev) { u32 ep_ctrl; @@ -41,7 +41,7 @@ static inline void s3c_udc_ep0_zlp(struct s3c_udc *dev) dev->ep0state = WAIT_FOR_IN_COMPLETE; } -void s3c_udc_pre_setup(void) +static void dwc2_udc_pre_setup(void) { u32 ep_ctrl; @@ -62,7 +62,7 @@ void s3c_udc_pre_setup(void) } -static inline void s3c_ep0_complete_out(void) +static inline void dwc2_ep0_complete_out(void) { u32 ep_ctrl; @@ -90,7 +90,7 @@ static inline void s3c_ep0_complete_out(void) } -static int setdma_rx(struct s3c_ep *ep, struct s3c_request *req) +static int setdma_rx(struct dwc2_ep *ep, struct dwc2_request *req) { u32 *buf, ctrl; u32 length, pktcnt; @@ -128,7 +128,7 @@ static int setdma_rx(struct s3c_ep *ep, struct s3c_request *req) } -int setdma_tx(struct s3c_ep *ep, struct s3c_request *req) +static int setdma_tx(struct dwc2_ep *ep, struct dwc2_request *req) { u32 *buf, ctrl = 0; u32 length, pktcnt; @@ -186,10 +186,10 @@ int setdma_tx(struct s3c_ep *ep, struct s3c_request *req) return length; } -static void complete_rx(struct s3c_udc *dev, u8 ep_num) +static void complete_rx(struct dwc2_udc *dev, u8 ep_num) { - struct s3c_ep *ep = &dev->ep[ep_num]; - struct s3c_request *req = NULL; + struct dwc2_ep *ep = &dev->ep[ep_num]; + struct dwc2_request *req = NULL; u32 ep_tsr = 0, xfer_size = 0, is_short = 0; if (list_empty(&ep->queue)) { @@ -200,7 +200,7 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num) } - req = list_entry(ep->queue.next, struct s3c_request, queue); + req = list_entry(ep->queue.next, struct dwc2_request, queue); ep_tsr = readl(®->out_endp[ep_num].doeptsiz); if (ep_num == EP0_CON) @@ -240,7 +240,7 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num) if (is_short || req->req.actual == req->req.length) { if (ep_num == EP0_CON && dev->ep0state == DATA_STATE_RECV) { debug_cond(DEBUG_OUT_EP != 0, " => Send ZLP\n"); - s3c_udc_ep0_zlp(dev); + dwc2_udc_ep0_zlp(dev); /* packet will be completed in complete_tx() */ dev->ep0state = WAIT_FOR_IN_COMPLETE; } else { @@ -248,7 +248,7 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num) if (!list_empty(&ep->queue)) { req = list_entry(ep->queue.next, - struct s3c_request, queue); + struct dwc2_request, queue); debug_cond(DEBUG_OUT_EP != 0, "%s: Next Rx request start...\n", __func__); @@ -259,16 +259,16 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num) setdma_rx(ep, req); } -static void complete_tx(struct s3c_udc *dev, u8 ep_num) +static void complete_tx(struct dwc2_udc *dev, u8 ep_num) { - struct s3c_ep *ep = &dev->ep[ep_num]; - struct s3c_request *req; + struct dwc2_ep *ep = &dev->ep[ep_num]; + struct dwc2_request *req; u32 ep_tsr = 0, xfer_size = 0, is_short = 0; u32 last; if (dev->ep0state == WAIT_FOR_NULL_COMPLETE) { dev->ep0state = WAIT_FOR_OUT_COMPLETE; - s3c_ep0_complete_out(); + dwc2_ep0_complete_out(); return; } @@ -280,7 +280,7 @@ static void complete_tx(struct s3c_udc *dev, u8 ep_num) } - req = list_entry(ep->queue.next, struct s3c_request, queue); + req = list_entry(ep->queue.next, struct dwc2_request, queue); ep_tsr = readl(®->in_endp[ep_num].dieptsiz); @@ -315,7 +315,7 @@ static void complete_tx(struct s3c_udc *dev, u8 ep_num) __func__, ep_num); done(ep, req, 0); dev->ep0state = WAIT_FOR_OUT_COMPLETE; - s3c_ep0_complete_out(); + dwc2_ep0_complete_out(); } else { debug_cond(DEBUG_IN_EP, "%s: ep_num = %d, invalid ep state\n", @@ -328,23 +328,23 @@ static void complete_tx(struct s3c_udc *dev, u8 ep_num) done(ep, req, 0); if (!list_empty(&ep->queue)) { - req = list_entry(ep->queue.next, struct s3c_request, queue); + req = list_entry(ep->queue.next, struct dwc2_request, queue); debug_cond(DEBUG_IN_EP, "%s: Next Tx request start...\n", __func__); setdma_tx(ep, req); } } -static inline void s3c_udc_check_tx_queue(struct s3c_udc *dev, u8 ep_num) +static inline void dwc2_udc_check_tx_queue(struct dwc2_udc *dev, u8 ep_num) { - struct s3c_ep *ep = &dev->ep[ep_num]; - struct s3c_request *req; + struct dwc2_ep *ep = &dev->ep[ep_num]; + struct dwc2_request *req; debug_cond(DEBUG_IN_EP, "%s: Check queue, ep_num = %d\n", __func__, ep_num); if (!list_empty(&ep->queue)) { - req = list_entry(ep->queue.next, struct s3c_request, queue); + req = list_entry(ep->queue.next, struct dwc2_request, queue); debug_cond(DEBUG_IN_EP, "%s: Next Tx request(0x%p) start...\n", __func__, req); @@ -362,7 +362,7 @@ static inline void s3c_udc_check_tx_queue(struct s3c_udc *dev, u8 ep_num) } -static void process_ep_in_intr(struct s3c_udc *dev) +static void process_ep_in_intr(struct dwc2_udc *dev) { u32 ep_intr, ep_intr_status; u8 ep_num = 0; @@ -392,12 +392,12 @@ static void process_ep_in_intr(struct s3c_udc *dev) dev->ep0state = WAIT_FOR_SETUP; if (dev->ep0state == WAIT_FOR_SETUP) - s3c_udc_pre_setup(); + dwc2_udc_pre_setup(); /* continue transfer after set_clear_halt for DMA mode */ if (clear_feature_flag == 1) { - s3c_udc_check_tx_queue(dev, + dwc2_udc_check_tx_queue(dev, clear_feature_num); clear_feature_flag = 0; } @@ -409,7 +409,7 @@ static void process_ep_in_intr(struct s3c_udc *dev) } } -static void process_ep_out_intr(struct s3c_udc *dev) +static void process_ep_out_intr(struct dwc2_udc *dev) { u32 ep_intr, ep_intr_status; u8 ep_num = 0; @@ -438,7 +438,7 @@ static void process_ep_out_intr(struct s3c_udc *dev) complete_rx(dev, ep_num); else { dev->ep0state = WAIT_FOR_SETUP; - s3c_udc_pre_setup(); + dwc2_udc_pre_setup(); } } @@ -446,7 +446,7 @@ static void process_ep_out_intr(struct s3c_udc *dev) CTRL_OUT_EP_SETUP_PHASE_DONE) { debug_cond(DEBUG_OUT_EP != 0, "SETUP packet arrived\n"); - s3c_handle_ep0(dev); + dwc2_handle_ep0(dev); } } else { if (ep_intr_status & TRANSFER_DONE) @@ -461,9 +461,9 @@ static void process_ep_out_intr(struct s3c_udc *dev) /* * usb client interrupt handler. */ -static int s3c_udc_irq(int irq, void *_dev) +static int dwc2_udc_irq(int irq, void *_dev) { - struct s3c_udc *dev = _dev; + struct dwc2_udc *dev = _dev; u32 intr_status; u32 usb_status, gintmsk; unsigned long flags = 0; @@ -554,7 +554,7 @@ static int s3c_udc_irq(int irq, void *_dev) reconfig_usbd(dev); dev->ep0state = WAIT_FOR_SETUP; reset_available = 0; - s3c_udc_pre_setup(); + dwc2_udc_pre_setup(); } else reset_available = 1; @@ -579,16 +579,16 @@ static int s3c_udc_irq(int irq, void *_dev) /** Queue one request * Kickstart transfer if needed */ -static int s3c_queue(struct usb_ep *_ep, struct usb_request *_req, +static int dwc2_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) { - struct s3c_request *req; - struct s3c_ep *ep; - struct s3c_udc *dev; + struct dwc2_request *req; + struct dwc2_ep *ep; + struct dwc2_udc *dev; unsigned long flags = 0; u32 ep_num, gintsts; - req = container_of(_req, struct s3c_request, req); + req = container_of(_req, struct dwc2_request, req); if (unlikely(!_req || !_req->complete || !_req->buf || !list_empty(&req->queue))) { @@ -596,7 +596,7 @@ static int s3c_queue(struct usb_ep *_ep, struct usb_request *_req, return -EINVAL; } - ep = container_of(_ep, struct s3c_ep, ep); + ep = container_of(_ep, struct dwc2_ep, ep); if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { @@ -646,20 +646,20 @@ static int s3c_queue(struct usb_ep *_ep, struct usb_request *_req, if (ep_num == 0) { /* EP0 */ list_add_tail(&req->queue, &ep->queue); - s3c_ep0_kick(dev, ep); + dwc2_ep0_kick(dev, ep); req = 0; } else if (ep_is_in(ep)) { gintsts = readl(®->gintsts); debug_cond(DEBUG_IN_EP, - "%s: ep_is_in, S3C_UDC_OTG_GINTSTS=0x%x\n", + "%s: ep_is_in, DWC2_UDC_OTG_GINTSTS=0x%x\n", __func__, gintsts); setdma_tx(ep, req); } else { gintsts = readl(®->gintsts); debug_cond(DEBUG_OUT_EP != 0, - "%s:ep_is_out, S3C_UDC_OTG_GINTSTS=0x%x\n", + "%s:ep_is_out, DWC2_UDC_OTG_GINTSTS=0x%x\n", __func__, gintsts); setdma_rx(ep, req); @@ -680,7 +680,7 @@ static int s3c_queue(struct usb_ep *_ep, struct usb_request *_req, /****************************************************************/ /* return: 0 = still running, 1 = completed, negative = errno */ -static int write_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req) +static int write_fifo_ep0(struct dwc2_ep *ep, struct dwc2_request *req) { u32 max; unsigned count; @@ -718,7 +718,7 @@ static int write_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req) return 0; } -int s3c_fifo_read(struct s3c_ep *ep, u32 *cp, int max) +static int dwc2_fifo_read(struct dwc2_ep *ep, u32 *cp, int max) { invalidate_dcache_range((unsigned long)cp, (unsigned long)cp + ROUND(max, CONFIG_SYS_CACHELINE_SIZE)); @@ -737,12 +737,12 @@ int s3c_fifo_read(struct s3c_ep *ep, u32 *cp, int max) * Called from control endpoint function * after it decodes a set address setup packet. */ -static void udc_set_address(struct s3c_udc *dev, unsigned char address) +static void udc_set_address(struct dwc2_udc *dev, unsigned char address) { u32 ctrl = readl(®->dcfg); writel(DEVICE_ADDRESS(address) | ctrl, ®->dcfg); - s3c_udc_ep0_zlp(dev); + dwc2_udc_ep0_zlp(dev); debug_cond(DEBUG_EP0 != 0, "%s: USB OTG 2.0 Device address=%d, DCFG=0x%x\n", @@ -751,9 +751,9 @@ static void udc_set_address(struct s3c_udc *dev, unsigned char address) dev->usb_address = address; } -static inline void s3c_udc_ep0_set_stall(struct s3c_ep *ep) +static inline void dwc2_udc_ep0_set_stall(struct dwc2_ep *ep) { - struct s3c_udc *dev; + struct dwc2_udc *dev; u32 ep_ctrl = 0; dev = ep->dev; @@ -776,16 +776,16 @@ static inline void s3c_udc_ep0_set_stall(struct s3c_ep *ep) */ dev->ep0state = WAIT_FOR_SETUP; - s3c_udc_pre_setup(); + dwc2_udc_pre_setup(); } -static void s3c_ep0_read(struct s3c_udc *dev) +static void dwc2_ep0_read(struct dwc2_udc *dev) { - struct s3c_request *req; - struct s3c_ep *ep = &dev->ep[0]; + struct dwc2_request *req; + struct dwc2_ep *ep = &dev->ep[0]; if (!list_empty(&ep->queue)) { - req = list_entry(ep->queue.next, struct s3c_request, queue); + req = list_entry(ep->queue.next, struct dwc2_request, queue); } else { debug("%s: ---> BUG\n", __func__); @@ -802,7 +802,7 @@ static void s3c_ep0_read(struct s3c_udc *dev) * or Bulk-Only mass storge reset */ ep->len = 0; - s3c_udc_ep0_zlp(dev); + dwc2_udc_ep0_zlp(dev); debug_cond(DEBUG_EP0 != 0, "%s: req.length = 0, bRequest = %d\n", @@ -816,16 +816,16 @@ static void s3c_ep0_read(struct s3c_udc *dev) /* * DATA_STATE_XMIT */ -static int s3c_ep0_write(struct s3c_udc *dev) +static int dwc2_ep0_write(struct dwc2_udc *dev) { - struct s3c_request *req; - struct s3c_ep *ep = &dev->ep[0]; + struct dwc2_request *req; + struct dwc2_ep *ep = &dev->ep[0]; int ret, need_zlp = 0; if (list_empty(&ep->queue)) req = 0; else - req = list_entry(ep->queue.next, struct s3c_request, queue); + req = list_entry(ep->queue.next, struct dwc2_request, queue); if (!req) { debug_cond(DEBUG_EP0 != 0, "%s: NULL REQ\n", __func__); @@ -859,7 +859,7 @@ static int s3c_ep0_write(struct s3c_udc *dev) return 1; } -int s3c_udc_get_status(struct s3c_udc *dev, +static int dwc2_udc_get_status(struct dwc2_udc *dev, struct usb_ctrlrequest *crq) { u8 ep_num = crq->wIndex & 0x7F; @@ -920,7 +920,7 @@ int s3c_udc_get_status(struct s3c_udc *dev, return 0; } -static void s3c_udc_set_nak(struct s3c_ep *ep) +static void dwc2_udc_set_nak(struct dwc2_ep *ep) { u8 ep_num; u32 ep_ctrl = 0; @@ -946,7 +946,7 @@ static void s3c_udc_set_nak(struct s3c_ep *ep) } -void s3c_udc_ep_set_stall(struct s3c_ep *ep) +static void dwc2_udc_ep_set_stall(struct dwc2_ep *ep) { u8 ep_num; u32 ep_ctrl = 0; @@ -981,7 +981,7 @@ void s3c_udc_ep_set_stall(struct s3c_ep *ep) return; } -void s3c_udc_ep_clear_stall(struct s3c_ep *ep) +static void dwc2_udc_ep_clear_stall(struct dwc2_ep *ep) { u8 ep_num; u32 ep_ctrl = 0; @@ -1029,14 +1029,14 @@ void s3c_udc_ep_clear_stall(struct s3c_ep *ep) return; } -static int s3c_udc_set_halt(struct usb_ep *_ep, int value) +static int dwc2_udc_set_halt(struct usb_ep *_ep, int value) { - struct s3c_ep *ep; - struct s3c_udc *dev; + struct dwc2_ep *ep; + struct dwc2_udc *dev; unsigned long flags = 0; u8 ep_num; - ep = container_of(_ep, struct s3c_ep, ep); + ep = container_of(_ep, struct dwc2_ep, ep); ep_num = ep_index(ep); if (unlikely(!_ep || !ep->desc || ep_num == EP0_CON || @@ -1050,7 +1050,7 @@ static int s3c_udc_set_halt(struct usb_ep *_ep, int value) if (value && ep_is_in(ep) && !list_empty(&ep->queue)) { debug("%s: %s queue not empty, req = %p\n", __func__, ep->ep.name, - list_entry(ep->queue.next, struct s3c_request, queue)); + list_entry(ep->queue.next, struct dwc2_request, queue)); return -EAGAIN; } @@ -1062,13 +1062,13 @@ static int s3c_udc_set_halt(struct usb_ep *_ep, int value) if (value == 0) { ep->stopped = 0; - s3c_udc_ep_clear_stall(ep); + dwc2_udc_ep_clear_stall(ep); } else { if (ep_num == 0) dev->ep0state = WAIT_FOR_SETUP; ep->stopped = 1; - s3c_udc_ep_set_stall(ep); + dwc2_udc_ep_set_stall(ep); } spin_unlock_irqrestore(&dev->lock, flags); @@ -1076,7 +1076,7 @@ static int s3c_udc_set_halt(struct usb_ep *_ep, int value) return 0; } -void s3c_udc_ep_activate(struct s3c_ep *ep) +static void dwc2_udc_ep_activate(struct dwc2_ep *ep) { u8 ep_num; u32 ep_ctrl = 0, daintmsk = 0; @@ -1123,13 +1123,13 @@ void s3c_udc_ep_activate(struct s3c_ep *ep) } -static int s3c_udc_clear_feature(struct usb_ep *_ep) +static int dwc2_udc_clear_feature(struct usb_ep *_ep) { - struct s3c_udc *dev; - struct s3c_ep *ep; + struct dwc2_udc *dev; + struct dwc2_ep *ep; u8 ep_num; - ep = container_of(_ep, struct s3c_ep, ep); + ep = container_of(_ep, struct dwc2_ep, ep); ep_num = ep_index(ep); dev = ep->dev; @@ -1158,7 +1158,7 @@ static int s3c_udc_clear_feature(struct usb_ep *_ep) break; } - s3c_udc_ep0_zlp(dev); + dwc2_udc_ep0_zlp(dev); break; case USB_RECIP_ENDPOINT: @@ -1168,14 +1168,14 @@ static int s3c_udc_clear_feature(struct usb_ep *_ep) if (usb_ctrl->wValue == USB_ENDPOINT_HALT) { if (ep_num == 0) { - s3c_udc_ep0_set_stall(ep); + dwc2_udc_ep0_set_stall(ep); return 0; } - s3c_udc_ep0_zlp(dev); + dwc2_udc_ep0_zlp(dev); - s3c_udc_ep_clear_stall(ep); - s3c_udc_ep_activate(ep); + dwc2_udc_ep_clear_stall(ep); + dwc2_udc_ep_activate(ep); ep->stopped = 0; clear_feature_num = ep_num; @@ -1187,13 +1187,13 @@ static int s3c_udc_clear_feature(struct usb_ep *_ep) return 0; } -static int s3c_udc_set_feature(struct usb_ep *_ep) +static int dwc2_udc_set_feature(struct usb_ep *_ep) { - struct s3c_udc *dev; - struct s3c_ep *ep; + struct dwc2_udc *dev; + struct dwc2_ep *ep; u8 ep_num; - ep = container_of(_ep, struct s3c_ep, ep); + ep = container_of(_ep, struct dwc2_ep, ep); ep_num = ep_index(ep); dev = ep->dev; @@ -1232,7 +1232,7 @@ static int s3c_udc_set_feature(struct usb_ep *_ep) break; } - s3c_udc_ep0_zlp(dev); + dwc2_udc_ep0_zlp(dev); return 0; case USB_RECIP_INTERFACE: @@ -1245,14 +1245,14 @@ static int s3c_udc_set_feature(struct usb_ep *_ep) "\tSET_FEATURE: USB_RECIP_ENDPOINT\n"); if (usb_ctrl->wValue == USB_ENDPOINT_HALT) { if (ep_num == 0) { - s3c_udc_ep0_set_stall(ep); + dwc2_udc_ep0_set_stall(ep); return 0; } ep->stopped = 1; - s3c_udc_ep_set_stall(ep); + dwc2_udc_ep_set_stall(ep); } - s3c_udc_ep0_zlp(dev); + dwc2_udc_ep0_zlp(dev); return 0; } @@ -1262,9 +1262,9 @@ static int s3c_udc_set_feature(struct usb_ep *_ep) /* * WAIT_FOR_SETUP (OUT_PKT_RDY) */ -void s3c_ep0_setup(struct s3c_udc *dev) +static void dwc2_ep0_setup(struct dwc2_udc *dev) { - struct s3c_ep *ep = &dev->ep[0]; + struct dwc2_ep *ep = &dev->ep[0]; int i; u8 ep_num; @@ -1272,7 +1272,7 @@ void s3c_ep0_setup(struct s3c_udc *dev) nuke(ep, -EPROTO); /* read control req from fifo (8 bytes) */ - s3c_fifo_read(ep, (u32 *)usb_ctrl, 8); + dwc2_fifo_read(ep, (u32 *)usb_ctrl, 8); debug_cond(DEBUG_SETUP != 0, "%s: bRequestType = 0x%x(%s), bRequest = 0x%x" @@ -1306,7 +1306,7 @@ void s3c_ep0_setup(struct s3c_udc *dev) "wLength = %d, setup returned\n", usb_ctrl->wLength); - s3c_udc_ep0_set_stall(ep); + dwc2_udc_ep0_set_stall(ep); dev->ep0state = WAIT_FOR_SETUP; return; @@ -1317,7 +1317,7 @@ void s3c_ep0_setup(struct s3c_udc *dev) "%s:BOT Rest:invalid wLength =%d, setup returned\n", __func__, usb_ctrl->wLength); - s3c_udc_ep0_set_stall(ep); + dwc2_udc_ep0_set_stall(ep); dev->ep0state = WAIT_FOR_SETUP; return; @@ -1384,7 +1384,7 @@ void s3c_ep0_setup(struct s3c_udc *dev) break; case USB_REQ_GET_STATUS: - if (!s3c_udc_get_status(dev, usb_ctrl)) + if (!dwc2_udc_get_status(dev, usb_ctrl)) return; break; @@ -1392,7 +1392,7 @@ void s3c_ep0_setup(struct s3c_udc *dev) case USB_REQ_CLEAR_FEATURE: ep_num = usb_ctrl->wIndex & 0x7f; - if (!s3c_udc_clear_feature(&dev->ep[ep_num].ep)) + if (!dwc2_udc_clear_feature(&dev->ep[ep_num].ep)) return; break; @@ -1400,7 +1400,7 @@ void s3c_ep0_setup(struct s3c_udc *dev) case USB_REQ_SET_FEATURE: ep_num = usb_ctrl->wIndex & 0x7f; - if (!s3c_udc_set_feature(&dev->ep[ep_num].ep)) + if (!dwc2_udc_set_feature(&dev->ep[ep_num].ep)) return; break; @@ -1427,7 +1427,7 @@ void s3c_ep0_setup(struct s3c_udc *dev) if (i < 0) { /* setup processing failed, force stall */ - s3c_udc_ep0_set_stall(ep); + dwc2_udc_ep0_set_stall(ep); dev->ep0state = WAIT_FOR_SETUP; debug_cond(DEBUG_SETUP != 0, @@ -1451,12 +1451,12 @@ void s3c_ep0_setup(struct s3c_udc *dev) /* * handle ep0 interrupt */ -static void s3c_handle_ep0(struct s3c_udc *dev) +static void dwc2_handle_ep0(struct dwc2_udc *dev) { if (dev->ep0state == WAIT_FOR_SETUP) { debug_cond(DEBUG_OUT_EP != 0, "%s: WAIT_FOR_SETUP\n", __func__); - s3c_ep0_setup(dev); + dwc2_ep0_setup(dev); } else { debug_cond(DEBUG_OUT_EP != 0, @@ -1465,16 +1465,16 @@ static void s3c_handle_ep0(struct s3c_udc *dev) } } -static void s3c_ep0_kick(struct s3c_udc *dev, struct s3c_ep *ep) +static void dwc2_ep0_kick(struct dwc2_udc *dev, struct dwc2_ep *ep) { debug_cond(DEBUG_EP0 != 0, "%s: ep_is_in = %d\n", __func__, ep_is_in(ep)); if (ep_is_in(ep)) { dev->ep0state = DATA_STATE_XMIT; - s3c_ep0_write(dev); + dwc2_ep0_write(dev); } else { dev->ep0state = DATA_STATE_RECV; - s3c_ep0_read(dev); + dwc2_ep0_read(dev); } } diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 0096a2f..39f7185 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -26,6 +26,14 @@ config USB_XHCI_UNIPHIER endif +config USB_OHCI_GENERIC + bool "Support for generic OHCI USB controller" + depends on OF_CONTROL + depends on DM_USB + default n + ---help--- + Enables support for generic OHCI controller. + config USB_EHCI_HCD bool "EHCI HCD (USB 2.0) support" ---help--- diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 0b4b458..6183b80 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_USB_OHCI_S3C24XX) += ohci-s3c24xx.o obj-$(CONFIG_USB_OHCI_EP93XX) += ohci-ep93xx.o obj-$(CONFIG_USB_OHCI_SUNXI) += ohci-sunxi.o obj-$(CONFIG_USB_OHCI_LPC32XX) += ohci-lpc32xx.o +obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o # echi obj-$(CONFIG_USB_EHCI) += ehci-hcd.o diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 18e9251..bede04b 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -219,14 +219,14 @@ static int ehci_usb_probe(struct udevice *dev) ctx->hcd = (struct ehci_hccr *)plat->hcd_base; ctx->usb = (struct exynos_usb_phy *)plat->phy_base; - hcor = (struct ehci_hcor *)((uint32_t)ctx->hcd + - HC_LENGTH(ehci_readl(&ctx->hcd->cr_capbase))); /* setup the Vbus gpio here */ if (dm_gpio_is_valid(&plat->vbus_gpio)) dm_gpio_set_value(&plat->vbus_gpio, 1); setup_usb_phy(ctx->usb); + hcor = (struct ehci_hcor *)((uint32_t)ctx->hcd + + HC_LENGTH(ehci_readl(&ctx->hcd->cr_capbase))); return ehci_register(dev, ctx->hcd, hcor, NULL, 0, USB_INIT_HOST); } diff --git a/drivers/usb/host/ohci-generic.c b/drivers/usb/host/ohci-generic.c new file mode 100644 index 0000000..f3307f4 --- /dev/null +++ b/drivers/usb/host/ohci-generic.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2015 Alexey Brodkin <abrodkin@synopsys.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include "ohci.h" + +#if !defined(CONFIG_USB_OHCI_NEW) +# error "Generic OHCI driver requires CONFIG_USB_OHCI_NEW" +#endif + +struct generic_ohci { + ohci_t ohci; +}; + +static int ohci_usb_probe(struct udevice *dev) +{ + struct ohci_regs *regs = (struct ohci_regs *)dev_get_addr(dev); + + return ohci_register(dev, regs); +} + +static int ohci_usb_remove(struct udevice *dev) +{ + return ohci_deregister(dev); +} + +static const struct udevice_id ohci_usb_ids[] = { + { .compatible = "generic-ohci" }, + { } +}; + +U_BOOT_DRIVER(ohci_generic) = { + .name = "ohci_generic", + .id = UCLASS_USB, + .of_match = ohci_usb_ids, + .probe = ohci_usb_probe, + .remove = ohci_usb_remove, + .ops = &ohci_usb_ops, + .priv_auto_alloc_size = sizeof(struct generic_ohci), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index 131f613..a257084 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -142,7 +142,7 @@ #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 0 -#define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USBID_ADDR 0x34052c46 diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index ec1f882..d101a77 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -51,8 +51,8 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_USB_GADGET -#define CONFIG_USB_GADGET_S3C_UDC_OTG -#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY +#define CONFIG_USB_GADGET_DWC2_OTG +#define CONFIG_USB_GADGET_DWC2_OTG_PHY #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 2877e19..8f65d7e 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -269,8 +269,8 @@ #define CONFIG_SYS_MAX_I2C_BUS 7 #define CONFIG_USB_GADGET -#define CONFIG_USB_GADGET_S3C_UDC_OTG -#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY +#define CONFIG_USB_GADGET_DWC2_OTG +#define CONFIG_USB_GADGET_DWC2_OTG_PHY #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_CMD_USB_MASS_STORAGE diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 35fef2b..7bb62ca 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -177,8 +177,8 @@ #define CONFIG_POWER_MAX8998 #define CONFIG_USB_GADGET -#define CONFIG_USB_GADGET_S3C_UDC_OTG -#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY +#define CONFIG_USB_GADGET_DWC2_OTG +#define CONFIG_USB_GADGET_DWC2_OTG_PHY #define CONFIG_USB_GADGET_DUALSPEED /* diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 217cfc0..2492f99 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -13,8 +13,8 @@ #undef CONFIG_BOARD_COMMON #undef CONFIG_USB_GADGET -#undef CONFIG_USB_GADGET_S3C_UDC_OTG -#undef CONFIG_USB_GADGET_S3C_UDC_OTG_PHY +#undef CONFIG_USB_GADGET_DWC2_OTG +#undef CONFIG_USB_GADGET_DWC2_OTG_PHY #undef CONFIG_CMD_USB_MASS_STORAGE #undef CONFIG_REVISION_TAG #undef CONFIG_CMD_THOR_DOWNLOAD diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index b3f65b6..b0bc689 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -243,7 +243,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void); */ #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) #define CONFIG_USB_GADGET -#define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 diff --git a/include/usb/dwc2_udc.h b/include/usb/dwc2_udc.h new file mode 100644 index 0000000..302e9a3 --- /dev/null +++ b/include/usb/dwc2_udc.h @@ -0,0 +1,25 @@ +/* + * drivers/usb/gadget/dwc2_udc.h + * Designware DWC2 on-chip full/high speed USB device controllers + * Copyright (C) 2005 for Samsung Electronics + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DWC2_USB_GADGET +#define __DWC2_USB_GADGET + +#define PHY0_SLEEP (1 << 5) + +struct dwc2_plat_otg_data { + int (*phy_control)(int on); + unsigned int regs_phy; + unsigned int regs_otg; + unsigned int usb_phy_ctrl; + unsigned int usb_flags; + unsigned int usb_gusbcfg; +}; + +int dwc2_udc_probe(struct dwc2_plat_otg_data *pdata); + +#endif /* __DWC2_USB_GADGET */ |