291 files changed, 3663 insertions, 2705 deletions

diff --git a/.checkpatch.conf b/.checkpatch.conf
index 35167e1..d1d32fa 100644
--- a/.checkpatch.conf
+++ b/.checkpatch.conf
@@ -21,3 +21,7 @@
 
 # Ignore networking block comment style
 --ignore NETWORKING_BLOCK_COMMENT_STYLE
+
+# Ignore "WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet
+# addresses are __aligned(2)".
+--ignore PREFER_ETHER_ADDR_COPY
diff --git a/Kconfig b/Kconfig
index ee4e060..3ce5ba1 100644
--- a/Kconfig
+++ b/Kconfig
@@ -225,6 +225,8 @@ endmenu		# Boot images
 
 source "common/Kconfig"
 
+source "cmd/Kconfig"
+
 source "dts/Kconfig"
 
 source "net/Kconfig"
diff --git a/Makefile b/Makefile
index c9c2cbe..06996d4 100644
--- a/Makefile
+++ b/Makefile
@@ -661,6 +661,7 @@ libs-y += drivers/usb/musb/
 libs-y += drivers/usb/musb-new/
 libs-y += drivers/usb/phy/
 libs-y += drivers/usb/ulpi/
+libs-y += cmd/
 libs-y += common/
 libs-$(CONFIG_API) += api/
 libs-$(CONFIG_HAS_POST) += post/
diff --git a/README b/README
index ece4793..864c7cc 100644
--- a/README
+++ b/README
@@ -3712,12 +3712,6 @@ Modem Support:
 - RTS/CTS Flow control enable:
 		CONFIG_HWFLOW
 
-- Modem debug support:
-		CONFIG_MODEM_SUPPORT_DEBUG
-
-		Enables debugging stuff (char screen[1024], dbg())
-		for modem support. Useful only with BDI2000.
-
 - Interrupt support (PPC):
 
 		There are common interrupt_init() and timer_interrupt()
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index 0550225..a3e14a8 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -40,7 +40,8 @@ ifeq ($(CONFIG_SYS_THUMB_BUILD),y)
 archprepare: checkthumb
 
 checkthumb:
-	@if test "$(call cc-version)" -lt "0404"; then \
+	@if test "$(call cc-name)" = "gcc" -a \
+			"$(call cc-version)" -lt "0404"; then \
 		echo -n '*** Your GCC does not produce working '; \
 		echo 'binaries in THUMB mode.'; \
 		echo '*** Your board is configured for THUMB mode.'; \
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 64514b1..27a3f2f 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -18,6 +18,8 @@ enum pll_clocks {
 	PLL_BUS,	/* System Bus PLL*/
 	PLL_USBOTG,	/* OTG USB PLL */
 	PLL_ENET,	/* ENET PLL */
+	PLL_AUDIO,	/* AUDIO PLL */
+	PLL_VIDEO,	/* AUDIO PLL */
 };
 
 struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
@@ -204,7 +206,7 @@ int enable_spi_clk(unsigned char enable, unsigned spi_num)
 }
 static u32 decode_pll(enum pll_clocks pll, u32 infreq)
 {
-	u32 div;
+	u32 div, test_div, pll_num, pll_denom;
 
 	switch (pll) {
 	case PLL_SYS:
@@ -227,6 +229,44 @@ static u32 decode_pll(enum pll_clocks pll, u32 infreq)
 		div &= BM_ANADIG_PLL_ENET_DIV_SELECT;
 
 		return 25000000 * (div + (div >> 1) + 1);
+	case PLL_AUDIO:
+		div = __raw_readl(&imx_ccm->analog_pll_audio);
+		if (!(div & BM_ANADIG_PLL_AUDIO_ENABLE))
+			return 0;
+		/* BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC is ignored */
+		if (div & BM_ANADIG_PLL_AUDIO_BYPASS)
+			return MXC_HCLK;
+		pll_num = __raw_readl(&imx_ccm->analog_pll_audio_num);
+		pll_denom = __raw_readl(&imx_ccm->analog_pll_audio_denom);
+		test_div = (div & BM_ANADIG_PLL_AUDIO_TEST_DIV_SELECT) >>
+			BP_ANADIG_PLL_AUDIO_TEST_DIV_SELECT;
+		div &= BM_ANADIG_PLL_AUDIO_DIV_SELECT;
+		if (test_div == 3) {
+			debug("Error test_div\n");
+			return 0;
+		}
+		test_div = 1 << (2 - test_div);
+
+		return infreq * (div + pll_num / pll_denom) / test_div;
+	case PLL_VIDEO:
+		div = __raw_readl(&imx_ccm->analog_pll_video);
+		if (!(div & BM_ANADIG_PLL_VIDEO_ENABLE))
+			return 0;
+		/* BM_ANADIG_PLL_AUDIO_BYPASS_CLK_SRC is ignored */
+		if (div & BM_ANADIG_PLL_VIDEO_BYPASS)
+			return MXC_HCLK;
+		pll_num = __raw_readl(&imx_ccm->analog_pll_video_num);
+		pll_denom = __raw_readl(&imx_ccm->analog_pll_video_denom);
+		test_div = (div & BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT) >>
+			BP_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
+		div &= BM_ANADIG_PLL_VIDEO_DIV_SELECT;
+		if (test_div == 3) {
+			debug("Error test_div\n");
+			return 0;
+		}
+		test_div = 1 << (2 - test_div);
+
+		return infreq * (div + pll_num / pll_denom) / test_div;
 	default:
 		return 0;
 	}
@@ -437,7 +477,7 @@ static u32 get_mmdc_ch0_clk(void)
 	u32 cbcmr = __raw_readl(&imx_ccm->cbcmr);
 	u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
 
-	u32 freq, podf, per2_clk2_podf;
+	u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div;
 
 	if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) ||
 	    is_cpu_type(MXC_CPU_MX6SL)) {
@@ -472,8 +512,21 @@ static u32 get_mmdc_ch0_clk(void)
 				freq = mxc_get_pll_pfd(PLL_BUS, 0);
 				break;
 			case 3:
-				/* static / 2 divider */
-				freq =  mxc_get_pll_pfd(PLL_BUS, 2) / 2;
+				pmu_misc2_audio_div = PMU_MISC2_AUDIO_DIV(__raw_readl(&imx_ccm->pmu_misc2));
+				switch (pmu_misc2_audio_div) {
+				case 0:
+				case 2:
+					pmu_misc2_audio_div = 1;
+					break;
+				case 1:
+					pmu_misc2_audio_div = 2;
+					break;
+				case 3:
+					pmu_misc2_audio_div = 4;
+					break;
+				}
+				freq = decode_pll(PLL_AUDIO, MXC_HCLK) /
+					pmu_misc2_audio_div;
 				break;
 			}
 		}
diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c
index c777922..1d8e470 100644
--- a/arch/arm/cpu/armv7/mx7/soc.c
+++ b/arch/arm/cpu/armv7/mx7/soc.c
@@ -130,6 +130,24 @@ static void init_csu(void)
 		writel(CSU_INIT_SEC_LEVEL0, CSU_IPS_BASE_ADDR + i * 4);
 }
 
+static void imx_enet_mdio_fixup(void)
+{
+	struct iomuxc_gpr_base_regs *gpr_regs =
+		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+
+	/*
+	 * The management data input/output (MDIO) requires open-drain,
+	 * i.MX7D TO1.0 ENET MDIO pin has no open drain, but TO1.1 supports
+	 * this feature. So to TO1.1, need to enable open drain by setting
+	 * bits GPR0[8:7].
+	 */
+
+	if (soc_rev() >= CHIP_REV_1_1) {
+		setbits_le32(&gpr_regs->gpr[0],
+			     IOMUXC_GPR_GPR0_ENET_MDIO_OPEN_DRAIN_MASK);
+	}
+}
+
 int arch_cpu_init(void)
 {
 	init_aips();
@@ -138,6 +156,8 @@ int arch_cpu_init(void)
 	/* Disable PDE bit of WMCR register */
 	imx_set_wdog_powerdown(false);
 
+	imx_enet_mdio_fixup();
+
 #ifdef CONFIG_APBH_DMA
 	/* Start APBH DMA */
 	mxs_dma_init();
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
index 13e0a3d..22212c2 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -103,6 +103,97 @@ struct mxc_ccm_reg {
 	u32 analog_pfd_528_set;
 	u32 analog_pfd_528_clr;
 	u32 analog_pfd_528_tog;
+	/* PMU Memory Map/Register Definition */
+	u32 pmu_reg_1p1;
+	u32 pmu_reg_1p1_set;
+	u32 pmu_reg_1p1_clr;
+	u32 pmu_reg_1p1_tog;
+	u32 pmu_reg_3p0;
+	u32 pmu_reg_3p0_set;
+	u32 pmu_reg_3p0_clr;
+	u32 pmu_reg_3p0_tog;
+	u32 pmu_reg_2p5;
+	u32 pmu_reg_2p5_set;
+	u32 pmu_reg_2p5_clr;
+	u32 pmu_reg_2p5_tog;
+	u32 pmu_reg_core;
+	u32 pmu_reg_core_set;
+	u32 pmu_reg_core_clr;
+	u32 pmu_reg_core_tog;
+	u32 pmu_misc0;
+	u32 pmu_misc0_set;
+	u32 pmu_misc0_clr;
+	u32 pmu_misc0_tog;
+	u32 pmu_misc1;
+	u32 pmu_misc1_set;
+	u32 pmu_misc1_clr;
+	u32 pmu_misc1_tog;
+	u32 pmu_misc2;
+	u32 pmu_misc2_set;
+	u32 pmu_misc2_clr;
+	u32 pmu_misc2_tog;
+	/* TEMPMON Memory Map/Register Definition */
+	u32 tempsense0;
+	u32 tempsense0_set;
+	u32 tempsense0_clr;
+	u32 tempsense0_tog;
+	u32 tempsense1;
+	u32 tempsense1_set;
+	u32 tempsense1_clr;
+	u32 tempsense1_tog;
+	/* USB Analog Memory Map/Register Definition */
+	u32 usb1_vbus_detect;
+	u32 usb1_vbus_detect_set;
+	u32 usb1_vbus_detect_clr;
+	u32 usb1_vbus_detect_tog;
+	u32 usb1_chrg_detect;
+	u32 usb1_chrg_detect_set;
+	u32 usb1_chrg_detect_clr;
+	u32 usb1_chrg_detect_tog;
+	u32 usb1_vbus_det_stat;
+	u32 usb1_vbus_det_stat_set;
+	u32 usb1_vbus_det_stat_clr;
+	u32 usb1_vbus_det_stat_tog;
+	u32 usb1_chrg_det_stat;
+	u32 usb1_chrg_det_stat_set;
+	u32 usb1_chrg_det_stat_clr;
+	u32 usb1_chrg_det_stat_tog;
+	u32 usb1_loopback;
+	u32 usb1_loopback_set;
+	u32 usb1_loopback_clr;
+	u32 usb1_loopback_tog;
+	u32 usb1_misc;
+	u32 usb1_misc_set;
+	u32 usb1_misc_clr;
+	u32 usb1_misc_tog;
+	u32 usb2_vbus_detect;
+	u32 usb2_vbus_detect_set;
+	u32 usb2_vbus_detect_clr;
+	u32 usb2_vbus_detect_tog;
+	u32 usb2_chrg_detect;
+	u32 usb2_chrg_detect_set;
+	u32 usb2_chrg_detect_clr;
+	u32 usb2_chrg_detect_tog;
+	u32 usb2_vbus_det_stat;
+	u32 usb2_vbus_det_stat_set;
+	u32 usb2_vbus_det_stat_clr;
+	u32 usb2_vbus_det_stat_tog;
+	u32 usb2_chrg_det_stat;
+	u32 usb2_chrg_det_stat_set;
+	u32 usb2_chrg_det_stat_clr;
+	u32 usb2_chrg_det_stat_tog;
+	u32 usb2_loopback;
+	u32 usb2_loopback_set;
+	u32 usb2_loopback_clr;
+	u32 usb2_loopback_tog;
+	u32 usb2_misc;
+	u32 usb2_misc_set;
+	u32 usb2_misc_clr;
+	u32 usb2_misc_tog;
+	u32 digprog;
+	u32 reserved1[7];
+	/* For i.MX 6SoloLite */
+	u32 digprog_sololite;
 };
 #endif
 
@@ -1136,4 +1227,16 @@ struct mxc_ccm_reg {
 
 #define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008
 
+#define BM_PMU_MISC2_AUDIO_DIV_MSB (1 << 23)
+#define BP_PMU_MISC2_AUDIO_DIV_MSB 23
+
+#define BM_PMU_MISC2_AUDIO_DIV_LSB (1 << 15)
+#define BP_PMU_MISC2_AUDIO_DIV_LSB 15
+
+#define PMU_MISC2_AUDIO_DIV(v) \
+	(((v & BM_PMU_MISC2_AUDIO_DIV_MSB) >> \
+	(BP_PMU_MISC2_AUDIO_DIV_MSB - 1)) | \
+	((v & BM_PMU_MISC2_AUDIO_DIV_LSB) >> \
+	 BP_PMU_MISC2_AUDIO_DIV_LSB))
+
 #endif /*__ARCH_ARM_MACH_MX6_CCM_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx7/imx-regs.h b/arch/arm/include/asm/arch-mx7/imx-regs.h
index e28a807..58a25c7 100644
--- a/arch/arm/include/asm/arch-mx7/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx7/imx-regs.h
@@ -272,6 +272,8 @@ struct src {
 #define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL5_SHIFT    5
 #define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL6_MASK     0x40u
 #define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL6_SHIFT    6
+#define IOMUXC_GPR_GPR0_ENET_MDIO_OPEN_DRAIN_MASK (3 << 7)
+#define IOMUXC_GPR_GPR0_ENET_MDIO_OPEN_DRAIN_SHIFT 7
 /* GPR1 Bit Fields */
 #define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS0_MASK    0x1u
 #define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS0_SHIFT   0
diff --git a/arch/arm/include/asm/imx-common/dma.h b/arch/arm/include/asm/imx-common/dma.h
index 7d421b3..1aec4f9 100644
--- a/arch/arm/include/asm/imx-common/dma.h
+++ b/arch/arm/include/asm/imx-common/dma.h
@@ -59,7 +59,7 @@ enum {
 	MXS_DMA_CHANNEL_AHB_APBH_RESERVED1,
 	MXS_MAX_DMA_CHANNELS,
 };
-#elif defined(CONFIG_MX6)
+#elif defined(CONFIG_MX6) || defined(CONFIG_MX7)
 enum {
 	MXS_DMA_CHANNEL_AHB_APBH_GPMI0 = 0,
 	MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
diff --git a/arch/arm/include/asm/imx-common/regs-apbh.h b/arch/arm/include/asm/imx-common/regs-apbh.h
index ca77436..391452c 100644
--- a/arch/arm/include/asm/imx-common/regs-apbh.h
+++ b/arch/arm/include/asm/imx-common/regs-apbh.h
@@ -96,7 +96,7 @@ struct mxs_apbh_regs {
 	mxs_reg_32(hw_apbh_version)
 };
 
-#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6))
+#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7))
 struct mxs_apbh_regs {
 	mxs_reg_32(hw_apbh_ctrl0)
 	mxs_reg_32(hw_apbh_ctrl1)
@@ -275,7 +275,7 @@ struct mxs_apbh_regs {
 #define	APBH_CTRL0_CLKGATE_CHANNEL_NAND7		0x0800
 #define	APBH_CTRL0_CLKGATE_CHANNEL_HSADC		0x1000
 #define	APBH_CTRL0_CLKGATE_CHANNEL_LCDIF		0x2000
-#elif defined(CONFIG_MX6)
+#elif (defined(CONFIG_MX6) || defined(CONFIG_MX7))
 #define	APBH_CTRL0_CLKGATE_CHANNEL_OFFSET		0
 #define	APBH_CTRL0_CLKGATE_CHANNEL_NAND0		0x0001
 #define	APBH_CTRL0_CLKGATE_CHANNEL_NAND1		0x0002
@@ -391,7 +391,7 @@ struct mxs_apbh_regs {
 #define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_LCDIF		0x2000
 #endif
 
-#if defined(CONFIG_MX6)
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7))
 #define	APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET		16
 #endif
 
diff --git a/arch/arm/include/asm/imx-common/regs-bch.h b/arch/arm/include/asm/imx-common/regs-bch.h
index 5c47783..adfbace 100644
--- a/arch/arm/include/asm/imx-common/regs-bch.h
+++ b/arch/arm/include/asm/imx-common/regs-bch.h
@@ -123,7 +123,7 @@ struct mxs_bch_regs {
 #define	BCH_FLASHLAYOUT0_NBLOCKS_OFFSET			24
 #define	BCH_FLASHLAYOUT0_META_SIZE_MASK			(0xff << 16)
 #define	BCH_FLASHLAYOUT0_META_SIZE_OFFSET		16
-#if defined(CONFIG_MX6)
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7))
 #define	BCH_FLASHLAYOUT0_ECC0_MASK			(0x1f << 11)
 #define	BCH_FLASHLAYOUT0_ECC0_OFFSET			11
 #else
@@ -154,7 +154,7 @@ struct mxs_bch_regs {
 
 #define	BCH_FLASHLAYOUT1_PAGE_SIZE_MASK			(0xffff << 16)
 #define	BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET		16
-#if defined(CONFIG_MX6)
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7))
 #define	BCH_FLASHLAYOUT1_ECCN_MASK			(0x1f << 11)
 #define	BCH_FLASHLAYOUT1_ECCN_OFFSET			11
 #else
diff --git a/arch/arm/mach-tegra/ap.c b/arch/arm/mach-tegra/ap.c
index b4229f4..a4fa00c 100644
--- a/arch/arm/mach-tegra/ap.c
+++ b/arch/arm/mach-tegra/ap.c
@@ -8,6 +8,7 @@
 /* Tegra AP (Application Processor) code */
 
 #include <common.h>
+#include <linux/bug.h>
 #include <asm/io.h>
 #include <asm/arch/gp_padctrl.h>
 #include <asm/arch/mc.h>
diff --git a/arch/openrisc/lib/board.c b/arch/openrisc/lib/board.c
index c26cc8f..b7fbd2f 100644
--- a/arch/openrisc/lib/board.c
+++ b/arch/openrisc/lib/board.c
@@ -13,6 +13,7 @@
  */
 
 #include <common.h>
+#include <console.h>
 #include <stdio_dev.h>
 #include <watchdog.h>
 #include <malloc.h>
diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk
index 6b44a37..b0ed374 100644
--- a/arch/powerpc/config.mk
+++ b/arch/powerpc/config.mk
@@ -41,7 +41,8 @@ archprepare: checkgcc4
 # that U-Boot wants.
 # See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
 checkgcc4:
-	@if test $(call cc-version) -lt 0400; then \
+	@if test "$(call cc-name)" = "gcc" -a \
+			$(call cc-version) -lt 0400; then \
 		echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
 		false; \
 	fi
diff --git a/arch/powerpc/cpu/mpc512x/serial.c b/arch/powerpc/cpu/mpc512x/serial.c
index 4105a28..ac77ddc 100644
--- a/arch/powerpc/cpu/mpc512x/serial.c
+++ b/arch/powerpc/cpu/mpc512x/serial.c
@@ -203,18 +203,6 @@ void serial_putc_dev(unsigned int idx, const char c)
 	out_8(&psc->tfdata_8, c);
 }
 
-void serial_putc_raw_dev(unsigned int idx, const char c)
-{
-	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	volatile psc512x_t *psc = (psc512x_t *) &im->psc[idx];
-
-	/* Wait for last character to go. */
-	while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP))
-		;
-
-	out_8(&psc->tfdata_8, c);
-}
-
 void serial_puts_dev(unsigned int idx, const char *s)
 {
 	while (*s)
diff --git a/arch/powerpc/cpu/mpc5xxx/serial.c b/arch/powerpc/cpu/mpc5xxx/serial.c
index cb5b0bf..bccdcf7 100644
--- a/arch/powerpc/cpu/mpc5xxx/serial.c
+++ b/arch/powerpc/cpu/mpc5xxx/serial.c
@@ -112,17 +112,6 @@ void serial_putc_dev (unsigned long dev_base, const char c)
 	psc->psc_buffer_8 = c;
 }
 
-void serial_putc_raw_dev(unsigned long dev_base, const char c)
-{
-	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-	/* Wait for last character to go. */
-	while (!(psc->psc_status & PSC_SR_TXEMP))
-		;
-
-	psc->psc_buffer_8 = c;
-}
-
-
 void serial_puts_dev (unsigned long dev_base, const char *s)
 {
 	while (*s) {
diff --git a/arch/powerpc/cpu/mpc83xx/law.c b/arch/powerpc/cpu/mpc83xx/law.c
index 997aea4..5659ab8 100644
--- a/arch/powerpc/cpu/mpc83xx/law.c
+++ b/arch/powerpc/cpu/mpc83xx/law.c
@@ -19,7 +19,7 @@ int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
 	if (start == 0)
 		start_align = 1ull << (LAW_SIZE_2G + 1);
 	else
-		start_align = 1ull << (__ffs64(start) - 1);
+		start_align = 1ull << (__ffs64(start));
 	law_sz = min(start_align, sz);
 	law_sz_enc = __ilog2_u64(law_sz) - 1;
 
@@ -39,7 +39,7 @@ int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
 	if (sz) {
 		start += law_sz;
 
-		start_align = 1ull << (__ffs64(start) - 1);
+		start_align = 1ull << (__ffs64(start));
 		law_sz = min(start_align, sz);
 		law_sz_enc = __ilog2_u64(law_sz) - 1;
 		ecm = &immap->sysconf.ddrlaw[1];
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 13a7d0f..8c6b678 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -23,6 +23,10 @@
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
 #include <asm/fsl_srio.h>
+#ifdef CONFIG_FSL_CORENET
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#endif
 #include <fsl_usb.h>
 #include <hwconfig.h>
 #include <linux/compiler.h>
@@ -788,6 +792,13 @@ int cpu_init_r(void)
 		spin_table_compat = 1;
 #endif
 
+#ifdef CONFIG_FSL_CORENET
+	set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	setup_portals();
+#endif
+#endif
+
 	l2cache_init();
 #if defined(CONFIG_RAMBOOT_PBL)
 	disable_cpc_sram();
diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c
index 24baad4..bd79297 100644
--- a/arch/powerpc/cpu/mpc8xxx/law.c
+++ b/arch/powerpc/cpu/mpc8xxx/law.c
@@ -188,7 +188,7 @@ int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
 	if (start == 0)
 		start_align = 1ull << (LAW_SIZE_32G + 1);
 	else
-		start_align = 1ull << (__ffs64(start) - 1);
+		start_align = 1ull << (__ffs64(start));
 	law_sz = min(start_align, sz);
 	law_sz_enc = __ilog2_u64(law_sz) - 1;
 
@@ -203,7 +203,7 @@ int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
 	if (sz) {
 		start += law_sz;
 
-		start_align = 1ull << (__ffs64(start) - 1);
+		start_align = 1ull << (__ffs64(start));
 		law_sz = min(start_align, sz);
 		law_sz_enc = __ilog2_u64(law_sz) - 1;
 
diff --git a/arch/x86/cpu/baytrail/valleyview.c b/arch/x86/cpu/baytrail/valleyview.c
index 7299f2c..25382f9 100644
--- a/arch/x86/cpu/baytrail/valleyview.c
+++ b/arch/x86/cpu/baytrail/valleyview.c
@@ -50,7 +50,7 @@ int arch_misc_init(void)
 	mrccache_save();
 #endif
 
-	return pirq_init();
+	return 0;
 }
 
 int reserve_arch(void)
diff --git a/arch/x86/cpu/coreboot/pci.c b/arch/x86/cpu/coreboot/pci.c
index 41e29a6..7f5087a 100644
--- a/arch/x86/cpu/coreboot/pci.c
+++ b/arch/x86/cpu/coreboot/pci.c
@@ -14,7 +14,8 @@
 #include <pci.h>
 
 static const struct udevice_id generic_pch_ids[] = {
-	{ .compatible = "intel,pch" },
+	{ .compatible = "intel,pch7" },
+	{ .compatible = "intel,pch9" },
 	{ }
 };
 
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index 381d835..6c3a748 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -688,7 +688,7 @@ static int x86_mp_init(void)
 }
 #endif
 
-__weak int x86_init_cpus(void)
+static int x86_init_cpus(void)
 {
 #ifdef CONFIG_SMP
 	debug("Init additional CPUs\n");
@@ -709,8 +709,24 @@ __weak int x86_init_cpus(void)
 
 int cpu_init_r(void)
 {
-	if (ll_boot_init())
-		return x86_init_cpus();
+	struct udevice *dev;
+	int ret;
+
+	if (!ll_boot_init())
+		return 0;
+
+	ret = x86_init_cpus();
+	if (ret)
+		return ret;
+
+	/*
+	 * Set up the northbridge, PCH and LPC if available. Note that these
+	 * may have had some limited pre-relocation init if they were probed
+	 * before relocation, but this is post relocation.
+	 */
+	uclass_first_device(UCLASS_NORTHBRIDGE, &dev);
+	uclass_first_device(UCLASS_PCH, &dev);
+	uclass_first_device(UCLASS_LPC, &dev);
 
 	return 0;
 }
diff --git a/arch/x86/cpu/interrupts.c b/arch/x86/cpu/interrupts.c
index b00ddc0..c40200b 100644
--- a/arch/x86/cpu/interrupts.c
+++ b/arch/x86/cpu/interrupts.c
@@ -12,6 +12,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <asm/cache.h>
 #include <asm/control_regs.h>
 #include <asm/interrupt.h>
@@ -244,6 +245,14 @@ int disable_interrupts(void)
 
 int interrupt_init(void)
 {
+	struct udevice *dev;
+	int ret;
+
+	/* Try to set up the interrupt router, but don't require one */
+	ret = uclass_first_device(UCLASS_IRQ, &dev);
+	if (ret && ret != -ENODEV)
+		return ret;
+
 	/*
 	 * When running as an EFI application we are not in control of
 	 * interrupts and should leave them alone.
diff --git a/arch/x86/cpu/irq.c b/arch/x86/cpu/irq.c
index 35b29f6..0b36ace 100644
--- a/arch/x86/cpu/irq.c
+++ b/arch/x86/cpu/irq.c
@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <errno.h>
 #include <fdtdec.h>
 #include <malloc.h>
@@ -82,12 +83,7 @@ static inline void fill_irq_info(struct irq_info *slot, int bus, int device,
 	slot->irq[pin - 1].bitmap = irq_router.irq_mask;
 }
 
-__weak void cpu_irq_init(void)
-{
-	return;
-}
-
-static int create_pirq_routing_table(void)
+static int create_pirq_routing_table(struct udevice *dev)
 {
 	const void *blob = gd->fdt_blob;
 	struct fdt_pci_addr addr;
@@ -97,16 +93,13 @@ static int create_pirq_routing_table(void)
 	struct irq_routing_table *rt;
 	struct irq_info *slot, *slot_base;
 	int irq_entries = 0;
+	int parent;
 	int i;
 	int ret;
 
-	node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_IRQ_ROUTER);
-	if (node < 0) {
-		debug("%s: Cannot find irq router node\n", __func__);
-		return -EINVAL;
-	}
-
-	ret = fdtdec_get_pci_addr(blob, node, FDT_PCI_SPACE_CONFIG,
+	node = dev->of_offset;
+	parent = dev->parent->of_offset;
+	ret = fdtdec_get_pci_addr(blob, parent, FDT_PCI_SPACE_CONFIG,
 				  "reg", &addr);
 	if (ret)
 		return ret;
@@ -225,13 +218,11 @@ static int create_pirq_routing_table(void)
 	return 0;
 }
 
-int pirq_init(void)
+int irq_router_common_init(struct udevice *dev)
 {
 	int ret;
 
-	cpu_irq_init();
-
-	ret = create_pirq_routing_table();
+	ret = create_pirq_routing_table(dev);
 	if (ret) {
 		debug("Failed to create pirq routing table\n");
 		return ret;
@@ -243,6 +234,11 @@ int pirq_init(void)
 	return 0;
 }
 
+int irq_router_probe(struct udevice *dev)
+{
+	return irq_router_common_init(dev);
+}
+
 u32 write_pirq_routing_table(u32 addr)
 {
 	if (!pirq_routing_table)
@@ -250,3 +246,20 @@ u32 write_pirq_routing_table(u32 addr)
 
 	return copy_pirq_routing_table(addr, pirq_routing_table);
 }
+
+static const struct udevice_id irq_router_ids[] = {
+	{ .compatible = "intel,irq-router" },
+	{ }
+};
+
+U_BOOT_DRIVER(irq_router_drv) = {
+	.name		= "intel_irq",
+	.id		= UCLASS_IRQ,
+	.of_match	= irq_router_ids,
+	.probe		= irq_router_probe,
+};
+
+UCLASS_DRIVER(irq) = {
+	.id		= UCLASS_IRQ,
+	.name		= "irq",
+};
diff --git a/arch/x86/cpu/ivybridge/Makefile b/arch/x86/cpu/ivybridge/Makefile
index 0c7efae..45ef141 100644
--- a/arch/x86/cpu/ivybridge/Makefile
+++ b/arch/x86/cpu/ivybridge/Makefile
@@ -7,7 +7,6 @@
 obj-y += bd82x6x.o
 obj-y += car.o
 obj-y += cpu.o
-obj-y += early_init.o
 obj-y += early_me.o
 obj-y += gma.o
 obj-y += lpc.o
@@ -15,10 +14,6 @@ obj-y += me_status.o
 obj-y += model_206ax.o
 obj-y += microcode_intel.o
 obj-y += northbridge.o
-obj-y += pch.o
-obj-y += pci.o
 obj-y += report_platform.o
 obj-y += sata.o
 obj-y += sdram.o
-obj-y += usb_ehci.o
-obj-y += usb_xhci.o
diff --git a/arch/x86/cpu/ivybridge/bd82x6x.c b/arch/x86/cpu/ivybridge/bd82x6x.c
index 434dfd6..2b172d4 100644
--- a/arch/x86/cpu/ivybridge/bd82x6x.c
+++ b/arch/x86/cpu/ivybridge/bd82x6x.c
@@ -3,12 +3,15 @@
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
-
 #include <common.h>
 #include <dm.h>
 #include <errno.h>
 #include <fdtdec.h>
 #include <malloc.h>
+#include <pch.h>
+#include <syscon.h>
+#include <asm/cpu.h>
+#include <asm/io.h>
 #include <asm/lapic.h>
 #include <asm/pci.h>
 #include <asm/arch/bd82x6x.h>
@@ -16,106 +19,198 @@
 #include <asm/arch/pch.h>
 #include <asm/arch/sandybridge.h>
 
-void bd82x6x_pci_init(pci_dev_t dev)
+#define BIOS_CTRL	0xdc
+
+static int pch_revision_id = -1;
+static int pch_type = -1;
+
+/**
+ * pch_silicon_revision() - Read silicon revision ID from the PCH
+ *
+ * @dev:	PCH device
+ * @return silicon revision ID
+ */
+static int pch_silicon_revision(struct udevice *dev)
 {
-	u16 reg16;
-	u8 reg8;
-
-	debug("bd82x6x PCI init.\n");
-	/* Enable Bus Master */
-	reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
-	reg16 |= PCI_COMMAND_MASTER;
-	x86_pci_write_config16(dev, PCI_COMMAND, reg16);
-
-	/* This device has no interrupt */
-	x86_pci_write_config8(dev, INTR, 0xff);
-
-	/* disable parity error response and SERR */
-	reg16 = x86_pci_read_config16(dev, BCTRL);
-	reg16 &= ~(1 << 0);
-	reg16 &= ~(1 << 1);
-	x86_pci_write_config16(dev, BCTRL, reg16);
-
-	/* Master Latency Count must be set to 0x04! */
-	reg8 = x86_pci_read_config8(dev, SMLT);
-	reg8 &= 0x07;
-	reg8 |= (0x04 << 3);
-	x86_pci_write_config8(dev, SMLT, reg8);
-
-	/* Will this improve throughput of bus masters? */
-	x86_pci_write_config8(dev, PCI_MIN_GNT, 0x06);
-
-	/* Clear errors in status registers */
-	reg16 = x86_pci_read_config16(dev, PSTS);
-	/* reg16 |= 0xf900; */
-	x86_pci_write_config16(dev, PSTS, reg16);
-
-	reg16 = x86_pci_read_config16(dev, SECSTS);
-	/* reg16 |= 0xf900; */
-	x86_pci_write_config16(dev, SECSTS, reg16);
+	u8 val;
+
+	if (pch_revision_id < 0) {
+		dm_pci_read_config8(dev, PCI_REVISION_ID, &val);
+		pch_revision_id = val;
+	}
+
+	return pch_revision_id;
 }
 
-static int bd82x6x_probe(struct udevice *dev)
+int pch_silicon_type(struct udevice *dev)
 {
-	const void *blob = gd->fdt_blob;
-	struct pci_controller *hose;
-	struct x86_cpu_priv *cpu;
-	int sata_node, gma_node;
-	int ret;
+	u8 val;
 
-	hose = pci_bus_to_hose(0);
-	lpc_enable(PCH_LPC_DEV);
-	lpc_init(hose, PCH_LPC_DEV);
-	sata_node = fdtdec_next_compatible(blob, 0,
-					   COMPAT_INTEL_PANTHERPOINT_AHCI);
-	if (sata_node < 0) {
-		debug("%s: Cannot find SATA node\n", __func__);
-		return -EINVAL;
+	if (pch_type < 0) {
+		dm_pci_read_config8(dev, PCI_DEVICE_ID + 1, &val);
+		pch_type = val;
 	}
-	bd82x6x_sata_init(PCH_SATA_DEV, blob, sata_node);
-	bd82x6x_usb_ehci_init(PCH_EHCI1_DEV);
-	bd82x6x_usb_ehci_init(PCH_EHCI2_DEV);
-
-	cpu = calloc(1, sizeof(*cpu));
-	if (!cpu)
-		return -ENOMEM;
-	model_206ax_init(cpu);
-
-	gma_node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_GMA);
-	if (gma_node < 0) {
-		debug("%s: Cannot find GMA node\n", __func__);
-		return -EINVAL;
+
+	return pch_type;
+}
+
+/**
+ * pch_silicon_supported() - Check if a certain revision is supported
+ *
+ * @dev:	PCH device
+ * @type:	PCH type
+ * @rev:	Minimum required resion
+ * @return 0 if not supported, 1 if supported
+ */
+static int pch_silicon_supported(struct udevice *dev, int type, int rev)
+{
+	int cur_type = pch_silicon_type(dev);
+	int cur_rev = pch_silicon_revision(dev);
+
+	switch (type) {
+	case PCH_TYPE_CPT:
+		/* CougarPoint minimum revision */
+		if (cur_type == PCH_TYPE_CPT && cur_rev >= rev)
+			return 1;
+		/* PantherPoint any revision */
+		if (cur_type == PCH_TYPE_PPT)
+			return 1;
+		break;
+
+	case PCH_TYPE_PPT:
+		/* PantherPoint minimum revision */
+		if (cur_type == PCH_TYPE_PPT && cur_rev >= rev)
+			return 1;
+		break;
+	}
+
+	return 0;
+}
+
+#define IOBP_RETRY 1000
+static inline int iobp_poll(void)
+{
+	unsigned try = IOBP_RETRY;
+	u32 data;
+
+	while (try--) {
+		data = readl(RCB_REG(IOBPS));
+		if ((data & 1) == 0)
+			return 1;
+		udelay(10);
 	}
-	ret = dm_pci_bus_find_bdf(PCH_VIDEO_DEV, &dev);
+
+	printf("IOBP timeout\n");
+	return 0;
+}
+
+void pch_iobp_update(struct udevice *dev, u32 address, u32 andvalue,
+		     u32 orvalue)
+{
+	u32 data;
+
+	/* Set the address */
+	writel(address, RCB_REG(IOBPIRI));
+
+	/* READ OPCODE */
+	if (pch_silicon_supported(dev, PCH_TYPE_CPT, PCH_STEP_B0))
+		writel(IOBPS_RW_BX, RCB_REG(IOBPS));
+	else
+		writel(IOBPS_READ_AX, RCB_REG(IOBPS));
+	if (!iobp_poll())
+		return;
+
+	/* Read IOBP data */
+	data = readl(RCB_REG(IOBPD));
+	if (!iobp_poll())
+		return;
+
+	/* Check for successful transaction */
+	if ((readl(RCB_REG(IOBPS)) & 0x6) != 0) {
+		printf("IOBP read 0x%08x failed\n", address);
+		return;
+	}
+
+	/* Update the data */
+	data &= andvalue;
+	data |= orvalue;
+
+	/* WRITE OPCODE */
+	if (pch_silicon_supported(dev, PCH_TYPE_CPT, PCH_STEP_B0))
+		writel(IOBPS_RW_BX, RCB_REG(IOBPS));
+	else
+		writel(IOBPS_WRITE_AX, RCB_REG(IOBPS));
+	if (!iobp_poll())
+		return;
+
+	/* Write IOBP data */
+	writel(data, RCB_REG(IOBPD));
+	if (!iobp_poll())
+		return;
+}
+
+static int bd82x6x_probe(struct udevice *dev)
+{
+	struct udevice *gma_dev;
+	int ret;
+
+	if (!(gd->flags & GD_FLG_RELOC))
+		return 0;
+
+	/* Cause the SATA device to do its init */
+	uclass_first_device(UCLASS_DISK, &dev);
+
+	ret = syscon_get_by_driver_data(X86_SYSCON_GMA, &gma_dev);
 	if (ret)
 		return ret;
-	ret = gma_func0_init(dev, blob, gma_node);
+	ret = gma_func0_init(gma_dev);
 	if (ret)
 		return ret;
 
 	return 0;
 }
 
-int bd82x6x_init(void)
+static int bd82x6x_pch_get_sbase(struct udevice *dev, ulong *sbasep)
 {
-	const void *blob = gd->fdt_blob;
-	int sata_node;
-
-	sata_node = fdtdec_next_compatible(blob, 0,
-					   COMPAT_INTEL_PANTHERPOINT_AHCI);
-	if (sata_node < 0) {
-		debug("%s: Cannot find SATA node\n", __func__);
-		return -EINVAL;
-	}
+	u32 rcba;
+
+	dm_pci_read_config32(dev, PCH_RCBA, &rcba);
+	/* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable */
+	rcba = rcba & 0xffffc000;
+	*sbasep = rcba + 0x3800;
+
+	return 0;
+}
+
+static enum pch_version bd82x6x_pch_get_version(struct udevice *dev)
+{
+	return PCHV_9;
+}
 
-	bd82x6x_pci_init(PCH_DEV);
-	bd82x6x_sata_enable(PCH_SATA_DEV, blob, sata_node);
-	northbridge_enable(PCH_DEV);
-	northbridge_init(PCH_DEV);
+static int bd82x6x_set_spi_protect(struct udevice *dev, bool protect)
+{
+	uint8_t bios_cntl;
+
+	/* Adjust the BIOS write protect and SMM BIOS Write Protect Disable */
+	dm_pci_read_config8(dev, BIOS_CTRL, &bios_cntl);
+	if (protect) {
+		bios_cntl &= ~BIOS_CTRL_BIOSWE;
+		bios_cntl |= BIT(5);
+	} else {
+		bios_cntl |= BIOS_CTRL_BIOSWE;
+		bios_cntl &= ~BIT(5);
+	}
+	dm_pci_write_config8(dev, BIOS_CTRL, bios_cntl);
 
 	return 0;
 }
 
+static const struct pch_ops bd82x6x_pch_ops = {
+	.get_sbase	= bd82x6x_pch_get_sbase,
+	.get_version	= bd82x6x_pch_get_version,
+	.set_spi_protect = bd82x6x_set_spi_protect,
+};
+
 static const struct udevice_id bd82x6x_ids[] = {
 	{ .compatible = "intel,bd82x6x" },
 	{ }
@@ -126,4 +221,5 @@ U_BOOT_DRIVER(bd82x6x_drv) = {
 	.id		= UCLASS_PCH,
 	.of_match	= bd82x6x_ids,
 	.probe		= bd82x6x_probe,
+	.ops		= &bd82x6x_pch_ops,
 };
diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c
index 343bfb4..948833c 100644
--- a/arch/x86/cpu/ivybridge/cpu.c
+++ b/arch/x86/cpu/ivybridge/cpu.c
@@ -15,6 +15,7 @@
 #include <dm.h>
 #include <errno.h>
 #include <fdtdec.h>
+#include <pch.h>
 #include <asm/cpu.h>
 #include <asm/io.h>
 #include <asm/lapic.h>
@@ -30,26 +31,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static void enable_port80_on_lpc(struct pci_controller *hose, pci_dev_t dev)
-{
-	/* Enable port 80 POST on LPC */
-	pci_hose_write_config_dword(hose, dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
-	clrbits_le32(RCB_REG(GCS), 4);
-}
-
-/*
- * Enable Prefetching and Caching.
- */
-static void enable_spi_prefetch(struct pci_controller *hose, pci_dev_t dev)
-{
-	u8 reg8;
-
-	pci_hose_read_config_byte(hose, dev, 0xdc, &reg8);
-	reg8 &= ~(3 << 2);
-	reg8 |= (2 << 2); /* Prefetching and Caching Enabled */
-	pci_hose_write_config_byte(hose, dev, 0xdc, reg8);
-}
-
 static int set_flex_ratio_to_tdp_nominal(void)
 {
 	msr_t flex_ratio, msr;
@@ -99,22 +80,6 @@ static int set_flex_ratio_to_tdp_nominal(void)
 	return -EINVAL;
 }
 
-static void set_spi_speed(void)
-{
-	u32 fdod;
-
-	/* Observe SPI Descriptor Component Section 0 */
-	writel(0x1000, RCB_REG(SPI_DESC_COMP0));
-
-	/* Extract the1 Write/Erase SPI Frequency from descriptor */
-	fdod = readl(RCB_REG(SPI_FREQ_WR_ERA));
-	fdod >>= 24;
-	fdod &= 7;
-
-	/* Set Software Sequence frequency to match */
-	clrsetbits_8(RCB_REG(SPI_FREQ_SWSEQ), 7, fdod);
-}
-
 int arch_cpu_init(void)
 {
 	post_code(POST_CPU_INIT);
@@ -124,10 +89,8 @@ int arch_cpu_init(void)
 
 int arch_cpu_init_dm(void)
 {
-	const void *blob = gd->fdt_blob;
 	struct pci_controller *hose;
-	struct udevice *bus;
-	int node;
+	struct udevice *bus, *dev;
 	int ret;
 
 	post_code(0x70);
@@ -141,19 +104,9 @@ int arch_cpu_init_dm(void)
 	/* TODO(sjg@chromium.org): Get rid of gd->hose */
 	gd->hose = hose;
 
-	node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_PCH);
-	if (node < 0)
-		return -ENOENT;
-	ret = lpc_early_init(gd->fdt_blob, node, PCH_LPC_DEV);
-	if (ret)
-		return ret;
-
-	enable_spi_prefetch(hose, PCH_LPC_DEV);
-
-	/* This is already done in start.S, but let's do it in C */
-	enable_port80_on_lpc(hose, PCH_LPC_DEV);
-
-	set_spi_speed();
+	ret = uclass_first_device(UCLASS_LPC, &dev);
+	if (!dev)
+		return -ENODEV;
 
 	/*
 	 * We should do as little as possible before the serial console is
@@ -167,41 +120,6 @@ int arch_cpu_init_dm(void)
 	return 0;
 }
 
-static int enable_smbus(void)
-{
-	pci_dev_t dev;
-	uint16_t value;
-
-	/* Set the SMBus device statically. */
-	dev = PCI_BDF(0x0, 0x1f, 0x3);
-
-	/* Check to make sure we've got the right device. */
-	value = x86_pci_read_config16(dev, 0x0);
-	if (value != 0x8086) {
-		printf("SMBus controller not found\n");
-		return -ENOSYS;
-	}
-
-	/* Set SMBus I/O base. */
-	x86_pci_write_config32(dev, SMB_BASE,
-			       SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
-
-	/* Set SMBus enable. */
-	x86_pci_write_config8(dev, HOSTC, HST_EN);
-
-	/* Set SMBus I/O space enable. */
-	x86_pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
-
-	/* Disable interrupt generation. */
-	outb(0, SMBUS_IO_BASE + SMBHSTCTL);
-
-	/* Clear any lingering errors, so transactions can run. */
-	outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
-	debug("SMBus controller enabled\n");
-
-	return 0;
-}
-
 #define PCH_EHCI0_TEMP_BAR0 0xe8000000
 #define PCH_EHCI1_TEMP_BAR0 0xe8000400
 #define PCH_XHCI_TEMP_BAR0  0xe8001000
@@ -215,33 +133,33 @@ static int enable_smbus(void)
  *
  * This is used to speed up the resume path.
  */
-static void enable_usb_bar(void)
+static void enable_usb_bar(struct udevice *bus)
 {
 	pci_dev_t usb0 = PCH_EHCI1_DEV;
 	pci_dev_t usb1 = PCH_EHCI2_DEV;
 	pci_dev_t usb3 = PCH_XHCI_DEV;
-	u32 cmd;
+	ulong cmd;
 
 	/* USB Controller 1 */
-	x86_pci_write_config32(usb0, PCI_BASE_ADDRESS_0,
-			       PCH_EHCI0_TEMP_BAR0);
-	cmd = x86_pci_read_config32(usb0, PCI_COMMAND);
+	pci_bus_write_config(bus, usb0, PCI_BASE_ADDRESS_0,
+			     PCH_EHCI0_TEMP_BAR0, PCI_SIZE_32);
+	pci_bus_read_config(bus, usb0, PCI_COMMAND, &cmd, PCI_SIZE_32);
 	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	x86_pci_write_config32(usb0, PCI_COMMAND, cmd);
+	pci_bus_write_config(bus, usb0, PCI_COMMAND, cmd, PCI_SIZE_32);
 
-	/* USB Controller 1 */
-	x86_pci_write_config32(usb1, PCI_BASE_ADDRESS_0,
-			       PCH_EHCI1_TEMP_BAR0);
-	cmd = x86_pci_read_config32(usb1, PCI_COMMAND);
+	/* USB Controller 2 */
+	pci_bus_write_config(bus, usb1, PCI_BASE_ADDRESS_0,
+			     PCH_EHCI1_TEMP_BAR0, PCI_SIZE_32);
+	pci_bus_read_config(bus, usb1, PCI_COMMAND, &cmd, PCI_SIZE_32);
 	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	x86_pci_write_config32(usb1, PCI_COMMAND, cmd);
+	pci_bus_write_config(bus, usb1, PCI_COMMAND, cmd, PCI_SIZE_32);
 
-	/* USB3 Controller */
-	x86_pci_write_config32(usb3, PCI_BASE_ADDRESS_0,
-			       PCH_XHCI_TEMP_BAR0);
-	cmd = x86_pci_read_config32(usb3, PCI_COMMAND);
+	/* USB3 Controller 1 */
+	pci_bus_write_config(bus, usb3, PCI_BASE_ADDRESS_0,
+			     PCH_XHCI_TEMP_BAR0, PCI_SIZE_32);
+	pci_bus_read_config(bus, usb3, PCI_COMMAND, &cmd, PCI_SIZE_32);
 	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	x86_pci_write_config32(usb3, PCI_COMMAND, cmd);
+	pci_bus_write_config(bus, usb3, PCI_COMMAND, cmd, PCI_SIZE_32);
 }
 
 static int report_bist_failure(void)
@@ -259,6 +177,7 @@ int print_cpuinfo(void)
 {
 	enum pei_boot_mode_t boot_mode = PEI_BOOT_NONE;
 	char processor_name[CPU_MAX_NAME_LEN];
+	struct udevice *dev, *lpc;
 	const char *name;
 	uint32_t pm1_cnt;
 	uint16_t pm1_sts;
@@ -289,7 +208,16 @@ int print_cpuinfo(void)
 	}
 
 	/* Early chipset init required before RAM init can work */
-	sandybridge_early_init(SANDYBRIDGE_MOBILE);
+	uclass_first_device(UCLASS_NORTHBRIDGE, &dev);
+
+	ret = uclass_first_device(UCLASS_LPC, &lpc);
+	if (ret)
+		return ret;
+	if (!dev)
+		return -ENODEV;
+
+	/* Cause the SATA device to do its early init */
+	uclass_first_device(UCLASS_DISK, &dev);
 
 	/* Check PM1_STS[15] to see if we are waking from Sx */
 	pm1_sts = inw(DEFAULT_PMBASE + PM1_STS);
@@ -308,20 +236,18 @@ int print_cpuinfo(void)
 	post_code(POST_EARLY_INIT);
 
 	/* Enable SPD ROMs and DDR-III DRAM */
-	ret = enable_smbus();
+	ret = uclass_first_device(UCLASS_I2C, &dev);
 	if (ret)
 		return ret;
+	if (!dev)
+		return -ENODEV;
 
 	/* Prepare USB controller early in S3 resume */
 	if (boot_mode == PEI_BOOT_RESUME)
-		enable_usb_bar();
+		enable_usb_bar(pci_get_controller(lpc->parent));
 
 	gd->arch.pei_boot_mode = boot_mode;
 
-	/* TODO: Move this to the board or driver */
-	x86_pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);
-	x86_pci_write_config32(PCH_LPC_DEV, GPIO_CNTL, 0x10);
-
 	/* Print processor name */
 	name = cpu_get_name(processor_name);
 	printf("CPU:   %s\n", name);
diff --git a/arch/x86/cpu/ivybridge/early_init.c b/arch/x86/cpu/ivybridge/early_init.c
deleted file mode 100644
index 9ca008e..0000000
--- a/arch/x86/cpu/ivybridge/early_init.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * From Coreboot
- *
- * Copyright (C) 2007-2010 coresystems GmbH
- * Copyright (C) 2011 Google Inc
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <asm/arch/pch.h>
-#include <asm/arch/sandybridge.h>
-
-static void sandybridge_setup_bars(pci_dev_t pch_dev, pci_dev_t lpc_dev)
-{
-	/* Setting up Southbridge. In the northbridge code. */
-	debug("Setting up static southbridge registers\n");
-	x86_pci_write_config32(lpc_dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
-
-	x86_pci_write_config32(lpc_dev, PMBASE, DEFAULT_PMBASE | 1);
-	x86_pci_write_config8(lpc_dev, ACPI_CNTL, 0x80); /* Enable ACPI BAR */
-
-	debug("Disabling watchdog reboot\n");
-	setbits_le32(RCB_REG(GCS), 1 >> 5);	/* No reset */
-	outw(1 << 11, DEFAULT_PMBASE | 0x60 | 0x08);	/* halt timer */
-
-	/* Set up all hardcoded northbridge BARs */
-	debug("Setting up static registers\n");
-	x86_pci_write_config32(pch_dev, EPBAR, DEFAULT_EPBAR | 1);
-	x86_pci_write_config32(pch_dev, EPBAR + 4, (0LL + DEFAULT_EPBAR) >> 32);
-	x86_pci_write_config32(pch_dev, MCHBAR, DEFAULT_MCHBAR | 1);
-	x86_pci_write_config32(pch_dev, MCHBAR + 4,
-			       (0LL + DEFAULT_MCHBAR) >> 32);
-	/* 64MB - busses 0-63 */
-	x86_pci_write_config32(pch_dev, PCIEXBAR, DEFAULT_PCIEXBAR | 5);
-	x86_pci_write_config32(pch_dev, PCIEXBAR + 4,
-			       (0LL + DEFAULT_PCIEXBAR) >> 32);
-	x86_pci_write_config32(pch_dev, DMIBAR, DEFAULT_DMIBAR | 1);
-	x86_pci_write_config32(pch_dev, DMIBAR + 4,
-			       (0LL + DEFAULT_DMIBAR) >> 32);
-
-	/* Set C0000-FFFFF to access RAM on both reads and writes */
-	x86_pci_write_config8(pch_dev, PAM0, 0x30);
-	x86_pci_write_config8(pch_dev, PAM1, 0x33);
-	x86_pci_write_config8(pch_dev, PAM2, 0x33);
-	x86_pci_write_config8(pch_dev, PAM3, 0x33);
-	x86_pci_write_config8(pch_dev, PAM4, 0x33);
-	x86_pci_write_config8(pch_dev, PAM5, 0x33);
-	x86_pci_write_config8(pch_dev, PAM6, 0x33);
-}
-
-static void sandybridge_setup_graphics(pci_dev_t pch_dev, pci_dev_t video_dev)
-{
-	u32 reg32;
-	u16 reg16;
-	u8 reg8;
-
-	reg16 = x86_pci_read_config16(video_dev, PCI_DEVICE_ID);
-	switch (reg16) {
-	case 0x0102: /* GT1 Desktop */
-	case 0x0106: /* GT1 Mobile */
-	case 0x010a: /* GT1 Server */
-	case 0x0112: /* GT2 Desktop */
-	case 0x0116: /* GT2 Mobile */
-	case 0x0122: /* GT2 Desktop >=1.3GHz */
-	case 0x0126: /* GT2 Mobile >=1.3GHz */
-	case 0x0156: /* IvyBridge */
-	case 0x0166: /* IvyBridge */
-		break;
-	default:
-		debug("Graphics not supported by this CPU/chipset\n");
-		return;
-	}
-
-	debug("Initialising Graphics\n");
-
-	/* Setup IGD memory by setting GGC[7:3] = 1 for 32MB */
-	reg16 = x86_pci_read_config16(pch_dev, GGC);
-	reg16 &= ~0x00f8;
-	reg16 |= 1 << 3;
-	/* Program GTT memory by setting GGC[9:8] = 2MB */
-	reg16 &= ~0x0300;
-	reg16 |= 2 << 8;
-	/* Enable VGA decode */
-	reg16 &= ~0x0002;
-	x86_pci_write_config16(pch_dev, GGC, reg16);
-
-	/* Enable 256MB aperture */
-	reg8 = x86_pci_read_config8(video_dev, MSAC);
-	reg8 &= ~0x06;
-	reg8 |= 0x02;
-	x86_pci_write_config8(video_dev, MSAC, reg8);
-
-	/* Erratum workarounds */
-	reg32 = readl(MCHBAR_REG(0x5f00));
-	reg32 |= (1 << 9) | (1 << 10);
-	writel(reg32, MCHBAR_REG(0x5f00));
-
-	/* Enable SA Clock Gating */
-	reg32 = readl(MCHBAR_REG(0x5f00));
-	writel(reg32 | 1, MCHBAR_REG(0x5f00));
-
-	/* GPU RC6 workaround for sighting 366252 */
-	reg32 = readl(MCHBAR_REG(0x5d14));
-	reg32 |= (1 << 31);
-	writel(reg32, MCHBAR_REG(0x5d14));
-
-	/* VLW */
-	reg32 = readl(MCHBAR_REG(0x6120));
-	reg32 &= ~(1 << 0);
-	writel(reg32, MCHBAR_REG(0x6120));
-
-	reg32 = readl(MCHBAR_REG(0x5418));
-	reg32 |= (1 << 4) | (1 << 5);
-	writel(reg32, MCHBAR_REG(0x5418));
-}
-
-void sandybridge_early_init(int chipset_type)
-{
-	pci_dev_t pch_dev = PCH_DEV;
-	pci_dev_t video_dev = PCH_VIDEO_DEV;
-	pci_dev_t lpc_dev = PCH_LPC_DEV;
-	u32 capid0_a;
-	u8 reg8;
-
-	/* Device ID Override Enable should be done very early */
-	capid0_a = x86_pci_read_config32(pch_dev, 0xe4);
-	if (capid0_a & (1 << 10)) {
-		reg8 = x86_pci_read_config8(pch_dev, 0xf3);
-		reg8 &= ~7; /* Clear 2:0 */
-
-		if (chipset_type == SANDYBRIDGE_MOBILE)
-			reg8 |= 1; /* Set bit 0 */
-
-		x86_pci_write_config8(pch_dev, 0xf3, reg8);
-	}
-
-	/* Setup all BARs required for early PCIe and raminit */
-	sandybridge_setup_bars(pch_dev, lpc_dev);
-
-	/* Device Enable */
-	x86_pci_write_config32(pch_dev, DEVEN, DEVEN_HOST | DEVEN_IGD);
-
-	sandybridge_setup_graphics(pch_dev, video_dev);
-}
diff --git a/arch/x86/cpu/ivybridge/early_me.c b/arch/x86/cpu/ivybridge/early_me.c
index 711470f..b1df77d 100644
--- a/arch/x86/cpu/ivybridge/early_me.c
+++ b/arch/x86/cpu/ivybridge/early_me.c
@@ -7,8 +7,10 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <errno.h>
 #include <asm/pci.h>
+#include <asm/cpu.h>
 #include <asm/processor.h>
 #include <asm/arch/me.h>
 #include <asm/arch/pch.h>
@@ -25,33 +27,36 @@ static const char *const me_ack_values[] = {
 	[ME_HFS_ACK_CONTINUE]	= "Continue to boot"
 };
 
-static inline void pci_read_dword_ptr(void *ptr, int offset)
+static inline void pci_read_dword_ptr(struct udevice *me_dev, void *ptr,
+				      int offset)
 {
 	u32 dword;
 
-	dword = x86_pci_read_config32(PCH_ME_DEV, offset);
+	dm_pci_read_config32(me_dev, offset, &dword);
 	memcpy(ptr, &dword, sizeof(dword));
 }
 
-static inline void pci_write_dword_ptr(void *ptr, int offset)
+static inline void pci_write_dword_ptr(struct udevice *me_dev, void *ptr,
+				       int offset)
 {
 	u32 dword = 0;
+
 	memcpy(&dword, ptr, sizeof(dword));
-	x86_pci_write_config32(PCH_ME_DEV, offset, dword);
+	dm_pci_write_config32(me_dev, offset, dword);
 }
 
-void intel_early_me_status(void)
+void intel_early_me_status(struct udevice *me_dev)
 {
 	struct me_hfs hfs;
 	struct me_gmes gmes;
 
-	pci_read_dword_ptr(&hfs, PCI_ME_HFS);
-	pci_read_dword_ptr(&gmes, PCI_ME_GMES);
+	pci_read_dword_ptr(me_dev, &hfs, PCI_ME_HFS);
+	pci_read_dword_ptr(me_dev, &gmes, PCI_ME_GMES);
 
 	intel_me_status(&hfs, &gmes);
 }
 
-int intel_early_me_init(void)
+int intel_early_me_init(struct udevice *me_dev)
 {
 	int count;
 	struct me_uma uma;
@@ -61,7 +66,7 @@ int intel_early_me_init(void)
 
 	/* Wait for ME UMA SIZE VALID bit to be set */
 	for (count = ME_RETRY; count > 0; --count) {
-		pci_read_dword_ptr(&uma, PCI_ME_UMA);
+		pci_read_dword_ptr(me_dev, &uma, PCI_ME_UMA);
 		if (uma.valid)
 			break;
 		udelay(ME_DELAY);
@@ -72,7 +77,7 @@ int intel_early_me_init(void)
 	}
 
 	/* Check for valid firmware */
-	pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+	pci_read_dword_ptr(me_dev, &hfs, PCI_ME_HFS);
 	if (hfs.fpt_bad) {
 		printf("WARNING: ME has bad firmware\n");
 		return -EBADF;
@@ -83,11 +88,11 @@ int intel_early_me_init(void)
 	return 0;
 }
 
-int intel_early_me_uma_size(void)
+int intel_early_me_uma_size(struct udevice *me_dev)
 {
 	struct me_uma uma;
 
-	pci_read_dword_ptr(&uma, PCI_ME_UMA);
+	pci_read_dword_ptr(me_dev, &uma, PCI_ME_UMA);
 	if (uma.valid) {
 		debug("ME: Requested %uMB UMA\n", uma.size);
 		return uma.size;
@@ -97,11 +102,11 @@ int intel_early_me_uma_size(void)
 	return -EINVAL;
 }
 
-static inline void set_global_reset(int enable)
+static inline void set_global_reset(struct udevice *dev, int enable)
 {
 	u32 etr3;
 
-	etr3 = x86_pci_read_config32(PCH_LPC_DEV, ETR3);
+	dm_pci_read_config32(dev, ETR3, &etr3);
 
 	/* Clear CF9 Without Resume Well Reset Enable */
 	etr3 &= ~ETR3_CWORWRE;
@@ -112,10 +117,11 @@ static inline void set_global_reset(int enable)
 	else
 		etr3 &= ~ETR3_CF9GR;
 
-	x86_pci_write_config32(PCH_LPC_DEV, ETR3, etr3);
+	dm_pci_write_config32(dev, ETR3, etr3);
 }
 
-int intel_early_me_init_done(u8 status)
+int intel_early_me_init_done(struct udevice *dev, struct udevice *me_dev,
+			     uint status)
 {
 	int count;
 	u32 mebase_l, mebase_h;
@@ -126,8 +132,8 @@ int intel_early_me_init_done(u8 status)
 	};
 
 	/* MEBASE from MESEG_BASE[35:20] */
-	mebase_l = x86_pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_L);
-	mebase_h = x86_pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_H);
+	dm_pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_L, &mebase_l);
+	dm_pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_H, &mebase_h);
 	mebase_h &= 0xf;
 	did.uma_base = (mebase_l >> 20) | (mebase_h << 12);
 
@@ -135,25 +141,25 @@ int intel_early_me_init_done(u8 status)
 	debug("ME: Sending Init Done with status: %d, UMA base: 0x%04x\n",
 	      status, did.uma_base);
 
-	pci_write_dword_ptr(&did, PCI_ME_H_GS);
+	pci_write_dword_ptr(me_dev, &did, PCI_ME_H_GS);
 
 	/* Must wait for ME acknowledgement */
 	for (count = ME_RETRY; count > 0; --count) {
-		pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+		pci_read_dword_ptr(me_dev, &hfs, PCI_ME_HFS);
 		if (hfs.bios_msg_ack)
 			break;
 		udelay(ME_DELAY);
 	}
 	if (!count) {
 		printf("ERROR: ME failed to respond\n");
-		return -1;
+		return -ETIMEDOUT;
 	}
 
 	/* Return the requested BIOS action */
 	debug("ME: Requested BIOS Action: %s\n", me_ack_values[hfs.ack_data]);
 
 	/* Check status after acknowledgement */
-	intel_early_me_status();
+	intel_early_me_status(me_dev);
 
 	switch (hfs.ack_data) {
 	case ME_HFS_ACK_CONTINUE:
@@ -161,17 +167,17 @@ int intel_early_me_init_done(u8 status)
 		return 0;
 	case ME_HFS_ACK_RESET:
 		/* Non-power cycle reset */
-		set_global_reset(0);
+		set_global_reset(dev, 0);
 		reset_cpu(0);
 		break;
 	case ME_HFS_ACK_PWR_CYCLE:
 		/* Power cycle reset */
-		set_global_reset(0);
+		set_global_reset(dev, 0);
 		x86_full_reset();
 		break;
 	case ME_HFS_ACK_GBL_RESET:
 		/* Global reset */
-		set_global_reset(1);
+		set_global_reset(dev, 1);
 		x86_full_reset();
 		break;
 	case ME_HFS_ACK_S3:
@@ -180,5 +186,17 @@ int intel_early_me_init_done(u8 status)
 		break;
 	}
 
-	return -1;
+	return -EINVAL;
 }
+
+static const struct udevice_id ivybridge_syscon_ids[] = {
+	{ .compatible = "intel,me", .data = X86_SYSCON_ME },
+	{ .compatible = "intel,gma", .data = X86_SYSCON_GMA },
+	{ }
+};
+
+U_BOOT_DRIVER(syscon_intel_me) = {
+	.name = "intel_me_syscon",
+	.id = UCLASS_SYSCON,
+	.of_match = ivybridge_syscon_ids,
+};
diff --git a/arch/x86/cpu/ivybridge/gma.c b/arch/x86/cpu/ivybridge/gma.c
index 85a09c6..3b6291e 100644
--- a/arch/x86/cpu/ivybridge/gma.c
+++ b/arch/x86/cpu/ivybridge/gma.c
@@ -8,6 +8,7 @@
 
 #include <common.h>
 #include <bios_emul.h>
+#include <dm.h>
 #include <errno.h>
 #include <fdtdec.h>
 #include <pci_rom.h>
@@ -352,14 +353,13 @@ static int gtt_poll(void *bar, u32 reg, u32 mask, u32 value)
 	return 0;
 }
 
-static int gma_pm_init_pre_vbios(void *gtt_bar)
+static int gma_pm_init_pre_vbios(void *gtt_bar, int rev)
 {
 	u32 reg32;
 
-	debug("GT Power Management Init, silicon = %#x\n",
-	      bridge_silicon_revision());
+	debug("GT Power Management Init, silicon = %#x\n", rev);
 
-	if (bridge_silicon_revision() < IVB_STEP_C0) {
+	if (rev < IVB_STEP_C0) {
 		/* 1: Enable force wake */
 		gtt_write(gtt_bar, 0xa18c, 0x00000001);
 		gtt_poll(gtt_bar, 0x130090, (1 << 0), (1 << 0));
@@ -369,14 +369,14 @@ static int gma_pm_init_pre_vbios(void *gtt_bar)
 		gtt_poll(gtt_bar, 0x130040, (1 << 0), (1 << 0));
 	}
 
-	if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) {
+	if ((rev & BASE_REV_MASK) == BASE_REV_SNB) {
 		/* 1d: Set GTT+0x42004 [15:14]=11 (SnB C1+) */
 		reg32 = gtt_read(gtt_bar, 0x42004);
 		reg32 |= (1 << 14) | (1 << 15);
 		gtt_write(gtt_bar, 0x42004, reg32);
 	}
 
-	if (bridge_silicon_revision() >= IVB_STEP_A0) {
+	if (rev >= IVB_STEP_A0) {
 		/* Display Reset Acknowledge Settings */
 		reg32 = gtt_read(gtt_bar, 0x45010);
 		reg32 |= (1 << 1) | (1 << 0);
@@ -385,7 +385,7 @@ static int gma_pm_init_pre_vbios(void *gtt_bar)
 
 	/* 2: Get GT SKU from GTT+0x911c[13] */
 	reg32 = gtt_read(gtt_bar, 0x911c);
-	if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) {
+	if ((rev & BASE_REV_MASK) == BASE_REV_SNB) {
 		if (reg32 & (1 << 13)) {
 			debug("SNB GT1 Power Meter Weights\n");
 			gtt_write_powermeter(gtt_bar, snb_pm_gt1);
@@ -434,13 +434,13 @@ static int gma_pm_init_pre_vbios(void *gtt_bar)
 	reg32 = gtt_read(gtt_bar, 0xa180);
 	reg32 |= (1 << 26) | (1 << 31);
 	/* (bit 20=1 for SNB step D1+ / IVB A0+) */
-	if (bridge_silicon_revision() >= SNB_STEP_D1)
+	if (rev >= SNB_STEP_D1)
 		reg32 |= (1 << 20);
 	gtt_write(gtt_bar, 0xa180, reg32);
 
 	/* 6a: for SnB step D2+ only */
-	if (((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) &&
-	    (bridge_silicon_revision() >= SNB_STEP_D2)) {
+	if (((rev & BASE_REV_MASK) == BASE_REV_SNB) &&
+	    (rev >= SNB_STEP_D2)) {
 		reg32 = gtt_read(gtt_bar, 0x9400);
 		reg32 |= (1 << 7);
 		gtt_write(gtt_bar, 0x9400, reg32);
@@ -452,7 +452,7 @@ static int gma_pm_init_pre_vbios(void *gtt_bar)
 		gtt_poll(gtt_bar, 0x941c, (1 << 1), (0 << 1));
 	}
 
-	if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_IVB) {
+	if ((rev & BASE_REV_MASK) == BASE_REV_IVB) {
 		reg32 = gtt_read(gtt_bar, 0x907c);
 		reg32 |= (1 << 16);
 		gtt_write(gtt_bar, 0x907c, reg32);
@@ -504,7 +504,7 @@ static int gma_pm_init_pre_vbios(void *gtt_bar)
 	gtt_write(gtt_bar, 0xa070, 0x0000000a); /* RP Idle Hysteresis */
 
 	/* 11a: Enable Render Standby (RC6) */
-	if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_IVB) {
+	if ((rev & BASE_REV_MASK) == BASE_REV_IVB) {
 		/*
 		 * IvyBridge should also support DeepRenderStandby.
 		 *
@@ -538,14 +538,16 @@ static int gma_pm_init_pre_vbios(void *gtt_bar)
 	return 0;
 }
 
-int gma_pm_init_post_vbios(void *gtt_bar, const void *blob, int node)
+int gma_pm_init_post_vbios(struct udevice *dev, int rev, void *gtt_bar)
 {
+	const void *blob = gd->fdt_blob;
+	int node = dev->of_offset;
 	u32 reg32, cycle_delay;
 
 	debug("GT Power Management Init (post VBIOS)\n");
 
 	/* 15: Deassert Force Wake */
-	if (bridge_silicon_revision() < IVB_STEP_C0) {
+	if (rev < IVB_STEP_C0) {
 		gtt_write(gtt_bar, 0xa18c, gtt_read(gtt_bar, 0xa18c) & ~1);
 		gtt_poll(gtt_bar, 0x130090, (1 << 0), (0 << 0));
 	} else {
@@ -728,15 +730,93 @@ static int int15_handler(void)
 	return res;
 }
 
-int gma_func0_init(struct udevice *dev, const void *blob, int node)
+void sandybridge_setup_graphics(struct udevice *dev, struct udevice *video_dev)
+{
+	u32 reg32;
+	u16 reg16;
+	u8 reg8;
+
+	dm_pci_read_config16(video_dev, PCI_DEVICE_ID, &reg16);
+	switch (reg16) {
+	case 0x0102: /* GT1 Desktop */
+	case 0x0106: /* GT1 Mobile */
+	case 0x010a: /* GT1 Server */
+	case 0x0112: /* GT2 Desktop */
+	case 0x0116: /* GT2 Mobile */
+	case 0x0122: /* GT2 Desktop >=1.3GHz */
+	case 0x0126: /* GT2 Mobile >=1.3GHz */
+	case 0x0156: /* IvyBridge */
+	case 0x0166: /* IvyBridge */
+		break;
+	default:
+		debug("Graphics not supported by this CPU/chipset\n");
+		return;
+	}
+
+	debug("Initialising Graphics\n");
+
+	/* Setup IGD memory by setting GGC[7:3] = 1 for 32MB */
+	dm_pci_read_config16(dev, GGC, &reg16);
+	reg16 &= ~0x00f8;
+	reg16 |= 1 << 3;
+	/* Program GTT memory by setting GGC[9:8] = 2MB */
+	reg16 &= ~0x0300;
+	reg16 |= 2 << 8;
+	/* Enable VGA decode */
+	reg16 &= ~0x0002;
+	dm_pci_write_config16(dev, GGC, reg16);
+
+	/* Enable 256MB aperture */
+	dm_pci_read_config8(video_dev, MSAC, &reg8);
+	reg8 &= ~0x06;
+	reg8 |= 0x02;
+	dm_pci_write_config8(video_dev, MSAC, reg8);
+
+	/* Erratum workarounds */
+	reg32 = readl(MCHBAR_REG(0x5f00));
+	reg32 |= (1 << 9) | (1 << 10);
+	writel(reg32, MCHBAR_REG(0x5f00));
+
+	/* Enable SA Clock Gating */
+	reg32 = readl(MCHBAR_REG(0x5f00));
+	writel(reg32 | 1, MCHBAR_REG(0x5f00));
+
+	/* GPU RC6 workaround for sighting 366252 */
+	reg32 = readl(MCHBAR_REG(0x5d14));
+	reg32 |= (1 << 31);
+	writel(reg32, MCHBAR_REG(0x5d14));
+
+	/* VLW */
+	reg32 = readl(MCHBAR_REG(0x6120));
+	reg32 &= ~(1 << 0);
+	writel(reg32, MCHBAR_REG(0x6120));
+
+	reg32 = readl(MCHBAR_REG(0x5418));
+	reg32 |= (1 << 4) | (1 << 5);
+	writel(reg32, MCHBAR_REG(0x5418));
+}
+
+int gma_func0_init(struct udevice *dev)
 {
 #ifdef CONFIG_VIDEO
 	ulong start;
 #endif
+	struct udevice *nbridge;
 	void *gtt_bar;
 	ulong base;
 	u32 reg32;
 	int ret;
+	int rev;
+
+	/* Enable PCH Display Port */
+	writew(0x0010, RCB_REG(DISPBDF));
+	setbits_le32(RCB_REG(FD2), PCH_ENABLE_DBDF);
+
+	ret = uclass_first_device(UCLASS_NORTHBRIDGE, &nbridge);
+	if (!nbridge)
+		return -ENODEV;
+	rev = bridge_silicon_revision(nbridge);
+	sandybridge_setup_graphics(nbridge, dev);
 
 	/* IGD needs to be Bus Master */
 	dm_pci_read_config32(dev, PCI_COMMAND, &reg32);
@@ -750,7 +830,7 @@ int gma_func0_init(struct udevice *dev, const void *blob, int node)
 
 	gtt_bar = (void *)dm_pci_read_bar32(dev, 0);
 	debug("GT bar %p\n", gtt_bar);
-	ret = gma_pm_init_pre_vbios(gtt_bar);
+	ret = gma_pm_init_pre_vbios(gtt_bar, rev);
 	if (ret)
 		return ret;
 
@@ -761,7 +841,7 @@ int gma_func0_init(struct udevice *dev, const void *blob, int node)
 	debug("BIOS ran in %lums\n", get_timer(start));
 #endif
 	/* Post VBIOS init */
-	ret = gma_pm_init_post_vbios(gtt_bar, blob, node);
+	ret = gma_pm_init_post_vbios(dev, rev, gtt_bar);
 	if (ret)
 		return ret;
 
diff --git a/arch/x86/cpu/ivybridge/lpc.c b/arch/x86/cpu/ivybridge/lpc.c
index af5d4a8..9ab5ed3 100644
--- a/arch/x86/cpu/ivybridge/lpc.c
+++ b/arch/x86/cpu/ivybridge/lpc.c
@@ -24,13 +24,13 @@
 #define ENABLE_ACPI_MODE_IN_COREBOOT	0
 #define TEST_SMM_FLASH_LOCKDOWN		0
 
-static int pch_enable_apic(pci_dev_t dev)
+static int pch_enable_apic(struct udevice *pch)
 {
 	u32 reg32;
 	int i;
 
 	/* Enable ACPI I/O and power management. Set SCI IRQ to IRQ9 */
-	x86_pci_write_config8(dev, ACPI_CNTL, 0x80);
+	dm_pci_write_config8(pch, ACPI_CNTL, 0x80);
 
 	writel(0, IO_APIC_INDEX);
 	writel(1 << 25, IO_APIC_DATA);
@@ -66,36 +66,36 @@ static int pch_enable_apic(pci_dev_t dev)
 	return 0;
 }
 
-static void pch_enable_serial_irqs(pci_dev_t dev)
+static void pch_enable_serial_irqs(struct udevice *pch)
 {
 	u32 value;
 
 	/* Set packet length and toggle silent mode bit for one frame. */
 	value = (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0);
 #ifdef CONFIG_SERIRQ_CONTINUOUS_MODE
-	x86_pci_write_config8(dev, SERIRQ_CNTL, value);
+	dm_pci_write_config8(pch, SERIRQ_CNTL, value);
 #else
-	x86_pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6));
+	dm_pci_write_config8(pch, SERIRQ_CNTL, value | (1 << 6));
 #endif
 }
 
-static int pch_pirq_init(const void *blob, int node, pci_dev_t dev)
+static int pch_pirq_init(struct udevice *pch)
 {
 	uint8_t route[8], *ptr;
 
-	if (fdtdec_get_byte_array(blob, node, "intel,pirq-routing", route,
-				  sizeof(route)))
+	if (fdtdec_get_byte_array(gd->fdt_blob, pch->of_offset,
+				  "intel,pirq-routing", route, sizeof(route)))
 		return -EINVAL;
 	ptr = route;
-	x86_pci_write_config8(dev, PIRQA_ROUT, *ptr++);
-	x86_pci_write_config8(dev, PIRQB_ROUT, *ptr++);
-	x86_pci_write_config8(dev, PIRQC_ROUT, *ptr++);
-	x86_pci_write_config8(dev, PIRQD_ROUT, *ptr++);
+	dm_pci_write_config8(pch, PIRQA_ROUT, *ptr++);
+	dm_pci_write_config8(pch, PIRQB_ROUT, *ptr++);
+	dm_pci_write_config8(pch, PIRQC_ROUT, *ptr++);
+	dm_pci_write_config8(pch, PIRQD_ROUT, *ptr++);
 
-	x86_pci_write_config8(dev, PIRQE_ROUT, *ptr++);
-	x86_pci_write_config8(dev, PIRQF_ROUT, *ptr++);
-	x86_pci_write_config8(dev, PIRQG_ROUT, *ptr++);
-	x86_pci_write_config8(dev, PIRQH_ROUT, *ptr++);
+	dm_pci_write_config8(pch, PIRQE_ROUT, *ptr++);
+	dm_pci_write_config8(pch, PIRQF_ROUT, *ptr++);
+	dm_pci_write_config8(pch, PIRQG_ROUT, *ptr++);
+	dm_pci_write_config8(pch, PIRQH_ROUT, *ptr++);
 
 	/*
 	 * TODO(sjg@chromium.org): U-Boot does not set up the interrupts
@@ -104,26 +104,28 @@ static int pch_pirq_init(const void *blob, int node, pci_dev_t dev)
 	return 0;
 }
 
-static int pch_gpi_routing(const void *blob, int node, pci_dev_t dev)
+static int pch_gpi_routing(struct udevice *pch)
 {
 	u8 route[16];
 	u32 reg;
 	int gpi;
 
-	if (fdtdec_get_byte_array(blob, node, "intel,gpi-routing", route,
-				  sizeof(route)))
+	if (fdtdec_get_byte_array(gd->fdt_blob, pch->of_offset,
+				  "intel,gpi-routing", route, sizeof(route)))
 		return -EINVAL;
 
 	for (reg = 0, gpi = 0; gpi < ARRAY_SIZE(route); gpi++)
 		reg |= route[gpi] << (gpi * 2);
 
-	x86_pci_write_config32(dev, 0xb8, reg);
+	dm_pci_write_config32(pch, 0xb8, reg);
 
 	return 0;
 }
 
-static int pch_power_options(const void *blob, int node, pci_dev_t dev)
+static int pch_power_options(struct udevice *pch)
 {
+	const void *blob = gd->fdt_blob;
+	int node = pch->of_offset;
 	u8 reg8;
 	u16 reg16, pmbase;
 	u32 reg32;
@@ -142,7 +144,7 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
 	 */
 	pwr_on = MAINBOARD_POWER_ON;
 
-	reg16 = x86_pci_read_config16(dev, GEN_PMCON_3);
+	dm_pci_read_config16(pch, GEN_PMCON_3, &reg16);
 	reg16 &= 0xfffe;
 	switch (pwr_on) {
 	case MAINBOARD_POWER_OFF:
@@ -169,7 +171,7 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
 
 	reg16 |= (1 << 12);	/* Disable SLP stretch after SUS well */
 
-	x86_pci_write_config16(dev, GEN_PMCON_3, reg16);
+	dm_pci_write_config16(pch, GEN_PMCON_3, reg16);
 	debug("Set power %s after power failure.\n", state);
 
 	/* Set up NMI on errors. */
@@ -193,21 +195,22 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
 	outb(reg8, 0x70);
 
 	/* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */
-	reg16 = x86_pci_read_config16(dev, GEN_PMCON_1);
+	dm_pci_read_config16(pch, GEN_PMCON_1, &reg16);
 	reg16 &= ~(3 << 0);	/* SMI# rate 1 minute */
 	reg16 &= ~(1 << 10);	/* Disable BIOS_PCI_EXP_EN for native PME */
 #if DEBUG_PERIODIC_SMIS
 	/* Set DEBUG_PERIODIC_SMIS in pch.h to debug using periodic SMIs */
 	reg16 |= (3 << 0);	/* Periodic SMI every 8s */
 #endif
-	x86_pci_write_config16(dev, GEN_PMCON_1, reg16);
+	dm_pci_write_config16(pch, GEN_PMCON_1, reg16);
 
 	/* Set the board's GPI routing. */
-	ret = pch_gpi_routing(blob, node, dev);
+	ret = pch_gpi_routing(pch);
 	if (ret)
 		return ret;
 
-	pmbase = x86_pci_read_config16(dev, 0x40) & 0xfffe;
+	dm_pci_read_config16(pch, 0x40, &pmbase);
+	pmbase &= 0xfffe;
 
 	writel(pmbase + GPE0_EN, fdtdec_get_int(blob, node,
 						"intel,gpe0-enable", 0));
@@ -227,16 +230,16 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
 	return 0;
 }
 
-static void pch_rtc_init(pci_dev_t dev)
+static void pch_rtc_init(struct udevice *pch)
 {
 	int rtc_failed;
 	u8 reg8;
 
-	reg8 = x86_pci_read_config8(dev, GEN_PMCON_3);
+	dm_pci_read_config8(pch, GEN_PMCON_3, &reg8);
 	rtc_failed = reg8 & RTC_BATTERY_DEAD;
 	if (rtc_failed) {
 		reg8 &= ~RTC_BATTERY_DEAD;
-		x86_pci_write_config8(dev, GEN_PMCON_3, reg8);
+		dm_pci_write_config8(pch, GEN_PMCON_3, reg8);
 	}
 	debug("rtc_failed = 0x%x\n", rtc_failed);
 
@@ -246,10 +249,10 @@ static void pch_rtc_init(pci_dev_t dev)
 }
 
 /* CougarPoint PCH Power Management init */
-static void cpt_pm_init(pci_dev_t dev)
+static void cpt_pm_init(struct udevice *pch)
 {
 	debug("CougarPoint PM init\n");
-	x86_pci_write_config8(dev, 0xa9, 0x47);
+	dm_pci_write_config8(pch, 0xa9, 0x47);
 	setbits_le32(RCB_REG(0x2238), (1 << 6) | (1 << 0));
 
 	setbits_le32(RCB_REG(0x228c), 1 << 0);
@@ -290,10 +293,10 @@ static void cpt_pm_init(pci_dev_t dev)
 }
 
 /* PantherPoint PCH Power Management init */
-static void ppt_pm_init(pci_dev_t dev)
+static void ppt_pm_init(struct udevice *pch)
 {
 	debug("PantherPoint PM init\n");
-	x86_pci_write_config8(dev, 0xa9, 0x47);
+	dm_pci_write_config8(pch, 0xa9, 0x47);
 	setbits_le32(RCB_REG(0x2238), 1 << 0);
 	setbits_le32(RCB_REG(0x228c), 1 << 0);
 	setbits_le16(RCB_REG(0x1100), (1 << 13) | (1 << 14));
@@ -340,21 +343,21 @@ static void enable_hpet(void)
 	clrsetbits_le32(RCB_REG(HPTC), 3 << 0, 1 << 7);
 }
 
-static void enable_clock_gating(pci_dev_t dev)
+static void enable_clock_gating(struct udevice *pch)
 {
 	u32 reg32;
 	u16 reg16;
 
 	setbits_le32(RCB_REG(0x2234), 0xf);
 
-	reg16 = x86_pci_read_config16(dev, GEN_PMCON_1);
+	dm_pci_read_config16(pch, GEN_PMCON_1, &reg16);
 	reg16 |= (1 << 2) | (1 << 11);
-	x86_pci_write_config16(dev, GEN_PMCON_1, reg16);
+	dm_pci_write_config16(pch, GEN_PMCON_1, reg16);
 
-	pch_iobp_update(0xEB007F07, ~0UL, (1 << 31));
-	pch_iobp_update(0xEB004000, ~0UL, (1 << 7));
-	pch_iobp_update(0xEC007F07, ~0UL, (1 << 31));
-	pch_iobp_update(0xEC004000, ~0UL, (1 << 7));
+	pch_iobp_update(pch, 0xEB007F07, ~0UL, (1 << 31));
+	pch_iobp_update(pch, 0xEB004000, ~0UL, (1 << 7));
+	pch_iobp_update(pch, 0xEC007F07, ~0UL, (1 << 31));
+	pch_iobp_update(pch, 0xEC004000, ~0UL, (1 << 7));
 
 	reg32 = readl(RCB_REG(CG));
 	reg32 |= (1 << 31);
@@ -376,77 +379,24 @@ static void enable_clock_gating(pci_dev_t dev)
 	setbits_le32(RCB_REG(0x3564), 0x3);
 }
 
-#if CONFIG_HAVE_SMI_HANDLER
-static void pch_lock_smm(pci_dev_t dev)
-{
-#if TEST_SMM_FLASH_LOCKDOWN
-	u8 reg8;
-#endif
-
-	if (acpi_slp_type != 3) {
-#if ENABLE_ACPI_MODE_IN_COREBOOT
-		debug("Enabling ACPI via APMC:\n");
-		outb(0xe1, 0xb2); /* Enable ACPI mode */
-		debug("done.\n");
-#else
-		debug("Disabling ACPI via APMC:\n");
-		outb(0x1e, 0xb2); /* Disable ACPI mode */
-		debug("done.\n");
-#endif
-	}
-
-	/* Don't allow evil boot loaders, kernels, or
-	 * userspace applications to deceive us:
-	 */
-	smm_lock();
-
-#if TEST_SMM_FLASH_LOCKDOWN
-	/* Now try this: */
-	debug("Locking BIOS to RO... ");
-	reg8 = x86_pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
-	debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
-	      (reg8 & 1) ? "rw" : "ro");
-	reg8 &= ~(1 << 0);			/* clear BIOSWE */
-	x86_pci_write_config8(dev, 0xdc, reg8);
-	reg8 |= (1 << 1);			/* set BLE */
-	x86_pci_write_config8(dev, 0xdc, reg8);
-	debug("ok.\n");
-	reg8 = x86_pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
-	debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
-	      (reg8 & 1) ? "rw" : "ro");
-
-	debug("Writing:\n");
-	writeb(0, 0xfff00000);
-	debug("Testing:\n");
-	reg8 |= (1 << 0);			/* set BIOSWE */
-	x86_pci_write_config8(dev, 0xdc, reg8);
-
-	reg8 = x86_pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
-	debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
-	      (reg8 & 1) ? "rw" : "ro");
-	debug("Done.\n");
-#endif
-}
-#endif
-
-static void pch_disable_smm_only_flashing(pci_dev_t dev)
+static void pch_disable_smm_only_flashing(struct udevice *pch)
 {
 	u8 reg8;
 
 	debug("Enabling BIOS updates outside of SMM... ");
-	reg8 = x86_pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
+	dm_pci_read_config8(pch, 0xdc, &reg8);	/* BIOS_CNTL */
 	reg8 &= ~(1 << 5);
-	x86_pci_write_config8(dev, 0xdc, reg8);
+	dm_pci_write_config8(pch, 0xdc, reg8);
 }
 
-static void pch_fixups(pci_dev_t dev)
+static void pch_fixups(struct udevice *pch)
 {
 	u8 gen_pmcon_2;
 
 	/* Indicate DRAM init done for MRC S3 to know it can resume */
-	gen_pmcon_2 = x86_pci_read_config8(dev, GEN_PMCON_2);
+	dm_pci_read_config8(pch, GEN_PMCON_2, &gen_pmcon_2);
 	gen_pmcon_2 |= (1 << 7);
-	x86_pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2);
+	dm_pci_write_config8(pch, GEN_PMCON_2, gen_pmcon_2);
 
 	/* Enable DMI ASPM in the PCH */
 	clrbits_le32(RCB_REG(0x2304), 1 << 10);
@@ -454,7 +404,49 @@ static void pch_fixups(pci_dev_t dev)
 	setbits_le32(RCB_REG(0x21a8), 0x3);
 }
 
-int lpc_early_init(const void *blob, int node, pci_dev_t dev)
+/*
+ * Enable Prefetching and Caching.
+ */
+static void enable_spi_prefetch(struct udevice *pch)
+{
+	u8 reg8;
+
+	dm_pci_read_config8(pch, 0xdc, &reg8);
+	reg8 &= ~(3 << 2);
+	reg8 |= (2 << 2); /* Prefetching and Caching Enabled */
+	dm_pci_write_config8(pch, 0xdc, reg8);
+}
+
+static void enable_port80_on_lpc(struct udevice *pch)
+{
+	/* Enable port 80 POST on LPC */
+	dm_pci_write_config32(pch, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
+	clrbits_le32(RCB_REG(GCS), 4);
+}
+
+static void set_spi_speed(void)
+{
+	u32 fdod;
+
+	/* Observe SPI Descriptor Component Section 0 */
+	writel(0x1000, RCB_REG(SPI_DESC_COMP0));
+
+	/* Extract the1 Write/Erase SPI Frequency from descriptor */
+	fdod = readl(RCB_REG(SPI_FREQ_WR_ERA));
+	fdod >>= 24;
+	fdod &= 7;
+
+	/* Set Software Sequence frequency to match */
+	clrsetbits_8(RCB_REG(SPI_FREQ_SWSEQ), 7, fdod);
+}
+
+/**
+ * lpc_early_init() - set up LPC serial ports and other early things
+ *
+ * @dev:	LPC device
+ * @return 0 if OK, -ve on error
+ */
+static int lpc_early_init(struct udevice *dev)
 {
 	struct reg_info {
 		u32 base;
@@ -463,17 +455,18 @@ int lpc_early_init(const void *blob, int node, pci_dev_t dev)
 	int count;
 	int i;
 
-	count = fdtdec_get_int_array_count(blob, node, "intel,gen-dec",
-			(u32 *)values, sizeof(values) / sizeof(u32));
+	count = fdtdec_get_int_array_count(gd->fdt_blob, dev->of_offset,
+			"intel,gen-dec", (u32 *)values,
+			sizeof(values) / sizeof(u32));
 	if (count < 0)
 		return -EINVAL;
 
 	/* Set COM1/COM2 decode range */
-	x86_pci_write_config16(dev, LPC_IO_DEC, 0x0010);
+	dm_pci_write_config16(dev->parent, LPC_IO_DEC, 0x0010);
 
 	/* Enable PS/2 Keyboard/Mouse, EC areas and COM1 */
-	x86_pci_write_config16(dev, LPC_EN, KBC_LPC_EN | MC_LPC_EN |
-			   GAMEL_LPC_EN | COMA_LPC_EN);
+	dm_pci_write_config16(dev->parent, LPC_EN, KBC_LPC_EN | MC_LPC_EN |
+			      GAMEL_LPC_EN | COMA_LPC_EN);
 
 	/* Write all registers but use 0 if we run out of data */
 	count = count * sizeof(u32) / sizeof(values[0]);
@@ -482,81 +475,114 @@ int lpc_early_init(const void *blob, int node, pci_dev_t dev)
 
 		if (i < count)
 			reg = ptr->base | PCI_COMMAND_IO | (ptr->size << 16);
-		x86_pci_write_config32(dev, LPC_GENX_DEC(i), reg);
+		dm_pci_write_config32(dev->parent, LPC_GENX_DEC(i), reg);
 	}
 
+	enable_spi_prefetch(dev->parent);
+
+	/* This is already done in start.S, but let's do it in C */
+	enable_port80_on_lpc(dev->parent);
+
+	set_spi_speed();
+
 	return 0;
 }
 
-int lpc_init(struct pci_controller *hose, pci_dev_t dev)
+static int lpc_init_extra(struct udevice *dev)
 {
+	struct udevice *pch = dev->parent;
 	const void *blob = gd->fdt_blob;
 	int node;
 
 	debug("pch: lpc_init\n");
-	pci_write_bar32(hose, dev, 0, 0);
-	pci_write_bar32(hose, dev, 1, 0xff800000);
-	pci_write_bar32(hose, dev, 2, 0xfec00000);
-	pci_write_bar32(hose, dev, 3, 0x800);
-	pci_write_bar32(hose, dev, 4, 0x900);
+	dm_pci_write_bar32(pch, 0, 0);
+	dm_pci_write_bar32(pch, 1, 0xff800000);
+	dm_pci_write_bar32(pch, 2, 0xfec00000);
+	dm_pci_write_bar32(pch, 3, 0x800);
+	dm_pci_write_bar32(pch, 4, 0x900);
 
 	node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_PCH);
 	if (node < 0)
 		return -ENOENT;
 
 	/* Set the value for PCI command register. */
-	x86_pci_write_config16(dev, PCI_COMMAND, 0x000f);
+	dm_pci_write_config16(pch, PCI_COMMAND, 0x000f);
 
 	/* IO APIC initialization. */
-	pch_enable_apic(dev);
+	pch_enable_apic(pch);
 
-	pch_enable_serial_irqs(dev);
+	pch_enable_serial_irqs(pch);
 
 	/* Setup the PIRQ. */
-	pch_pirq_init(blob, node, dev);
+	pch_pirq_init(pch);
 
 	/* Setup power options. */
-	pch_power_options(blob, node, dev);
+	pch_power_options(pch);
 
 	/* Initialize power management */
-	switch (pch_silicon_type()) {
+	switch (pch_silicon_type(pch)) {
 	case PCH_TYPE_CPT: /* CougarPoint */
-		cpt_pm_init(dev);
+		cpt_pm_init(pch);
 		break;
 	case PCH_TYPE_PPT: /* PantherPoint */
-		ppt_pm_init(dev);
+		ppt_pm_init(pch);
 		break;
 	default:
-		printf("Unknown Chipset: %#02x.%dx\n", PCI_DEV(dev),
-		       PCI_FUNC(dev));
+		printf("Unknown Chipset: %s\n", pch->name);
 		return -ENOSYS;
 	}
 
 	/* Initialize the real time clock. */
-	pch_rtc_init(dev);
+	pch_rtc_init(pch);
 
 	/* Initialize the High Precision Event Timers, if present. */
 	enable_hpet();
 
 	/* Initialize Clock Gating */
-	enable_clock_gating(dev);
+	enable_clock_gating(pch);
 
-	pch_disable_smm_only_flashing(dev);
+	pch_disable_smm_only_flashing(pch);
 
-#if CONFIG_HAVE_SMI_HANDLER
-	pch_lock_smm(dev);
-#endif
+	pch_fixups(pch);
 
-	pch_fixups(dev);
+	return 0;
+}
+
+static int bd82x6x_lpc_early_init(struct udevice *dev)
+{
+	/* Setting up Southbridge. In the northbridge code. */
+	debug("Setting up static southbridge registers\n");
+	dm_pci_write_config32(dev->parent, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
+	dm_pci_write_config32(dev->parent, PMBASE, DEFAULT_PMBASE | 1);
+
+	/* Enable ACPI BAR */
+	dm_pci_write_config8(dev->parent, ACPI_CNTL, 0x80);
+
+	debug("Disabling watchdog reboot\n");
+	setbits_le32(RCB_REG(GCS), 1 >> 5);	/* No reset */
+	outw(1 << 11, DEFAULT_PMBASE | 0x60 | 0x08);	/* halt timer */
+
+	dm_pci_write_config32(dev->parent, GPIO_BASE, DEFAULT_GPIOBASE | 1);
+	dm_pci_write_config32(dev->parent, GPIO_CNTL, 0x10);
 
 	return 0;
 }
 
-void lpc_enable(pci_dev_t dev)
+static int bd82x6x_lpc_probe(struct udevice *dev)
 {
-	/* Enable PCH Display Port */
-	writew(0x0010, RCB_REG(DISPBDF));
-	setbits_le32(RCB_REG(FD2), PCH_ENABLE_DBDF);
+	int ret;
+
+	if (!(gd->flags & GD_FLG_RELOC)) {
+		ret = lpc_early_init(dev);
+		if (ret) {
+			debug("%s: lpc_early_init() failed\n", __func__);
+			return ret;
+		}
+
+		return bd82x6x_lpc_early_init(dev);
+	}
+
+	return lpc_init_extra(dev);
 }
 
 static const struct udevice_id bd82x6x_lpc_ids[] = {
@@ -568,4 +594,5 @@ U_BOOT_DRIVER(bd82x6x_lpc_drv) = {
 	.name		= "lpc",
 	.id		= UCLASS_LPC,
 	.of_match	= bd82x6x_lpc_ids,
+	.probe		= bd82x6x_lpc_probe,
 };
diff --git a/arch/x86/cpu/ivybridge/model_206ax.c b/arch/x86/cpu/ivybridge/model_206ax.c
index fd7db97..9654600 100644
--- a/arch/x86/cpu/ivybridge/model_206ax.c
+++ b/arch/x86/cpu/ivybridge/model_206ax.c
@@ -8,10 +8,13 @@
  */
 
 #include <common.h>
+#include <cpu.h>
+#include <dm.h>
 #include <fdtdec.h>
 #include <malloc.h>
 #include <asm/acpi.h>
 #include <asm/cpu.h>
+#include <asm/cpu_x86.h>
 #include <asm/lapic.h>
 #include <asm/msr.h>
 #include <asm/mtrr.h>
@@ -280,18 +283,13 @@ static void configure_c_states(void)
 	msr_write(MSR_PP1_CURRENT_CONFIG, msr);
 }
 
-static int configure_thermal_target(void)
+static int configure_thermal_target(struct udevice *dev)
 {
 	int tcc_offset;
 	msr_t msr;
-	int node;
 
-	/* Find pointer to CPU configuration */
-	node = fdtdec_next_compatible(gd->fdt_blob, 0,
-				      COMPAT_INTEL_MODEL_206AX);
-	if (node < 0)
-		return -ENOENT;
-	tcc_offset = fdtdec_get_int(gd->fdt_blob, node, "tcc-offset", 0);
+	tcc_offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "tcc-offset",
+				    0);
 
 	/* Set TCC activaiton offset if supported */
 	msr = msr_read(MSR_PLATFORM_INFO);
@@ -400,56 +398,7 @@ static void configure_mca(void)
 static unsigned ehci_debug_addr;
 #endif
 
-/*
- * Initialize any extra cores/threads in this package.
- */
-static int intel_cores_init(struct x86_cpu_priv *cpu)
-{
-	struct cpuid_result result;
-	unsigned threads_per_package, threads_per_core, i;
-
-	/* Logical processors (threads) per core */
-	result = cpuid_ext(0xb, 0);
-	threads_per_core = result.ebx & 0xffff;
-
-	/* Logical processors (threads) per package */
-	result = cpuid_ext(0xb, 1);
-	threads_per_package = result.ebx & 0xffff;
-
-	debug("CPU: %u has %u cores, %u threads per core\n",
-	      cpu->apic_id, threads_per_package / threads_per_core,
-	      threads_per_core);
-
-	for (i = 1; i < threads_per_package; ++i) {
-		struct x86_cpu_priv *new_cpu;
-
-		new_cpu = calloc(1, sizeof(*new_cpu));
-		if (!new_cpu)
-			return -ENOMEM;
-
-		new_cpu->apic_id = cpu->apic_id + i;
-
-		/* Update APIC ID if no hyperthreading */
-		if (threads_per_core == 1)
-			new_cpu->apic_id <<= 1;
-
-		debug("CPU: %u has core %u\n", cpu->apic_id, new_cpu->apic_id);
-
-#if 0 && CONFIG_SMP && CONFIG_MAX_CPUS > 1
-		/* TODO(sjg@chromium.org): Start the new cpu */
-		if (!start_cpu(new_cpu)) {
-			/* Record the error in cpu? */
-			printk(BIOS_ERR, "CPU %u would not start!\n",
-			       new_cpu->apic_id);
-			new_cpu->start_err = 1;
-		}
-#endif
-	}
-
-	return 0;
-}
-
-int model_206ax_init(struct x86_cpu_priv *cpu)
+static int model_206ax_init(struct udevice *dev)
 {
 	int ret;
 
@@ -463,16 +412,6 @@ int model_206ax_init(struct x86_cpu_priv *cpu)
 	set_ehci_debug(0);
 #endif
 
-	/* Setup MTRRs based on physical address size */
-#if 0 /* TODO: Implement this */
-	struct cpuid_result cpuid_regs;
-
-	cpuid_regs = cpuid(0x80000008);
-	x86_setup_fixed_mtrrs();
-	x86_setup_var_mtrrs(cpuid_regs.eax & 0xff, 2);
-	x86_mtrr_check();
-#endif
-
 #if CONFIG_USBDEBUG
 	set_ehci_debug(ehci_debug_addr);
 #endif
@@ -491,9 +430,11 @@ int model_206ax_init(struct x86_cpu_priv *cpu)
 	configure_misc();
 
 	/* Thermal throttle activation offset */
-	ret = configure_thermal_target();
-	if (ret)
+	ret = configure_thermal_target(dev);
+	if (ret) {
+		debug("Cannot set thermal target\n");
 		return ret;
+	}
 
 	/* Enable Direct Cache Access */
 	configure_dca_cap();
@@ -507,8 +448,49 @@ int model_206ax_init(struct x86_cpu_priv *cpu)
 	/* Enable Turbo */
 	turbo_enable();
 
-	/* Start up extra cores */
-	intel_cores_init(cpu);
+	return 0;
+}
+
+static int model_206ax_get_info(struct udevice *dev, struct cpu_info *info)
+{
+	msr_t msr;
+
+	msr = msr_read(IA32_PERF_CTL);
+	info->cpu_freq = ((msr.lo >> 8) & 0xff) * SANDYBRIDGE_BCLK * 1000000;
+	info->features = 1 << CPU_FEAT_L1_CACHE | 1 << CPU_FEAT_MMU;
+
+	return 0;
+}
+
+static int model_206ax_get_count(struct udevice *dev)
+{
+	return 4;
+}
+
+static int cpu_x86_model_206ax_probe(struct udevice *dev)
+{
+	if (dev->seq == 0)
+		model_206ax_init(dev);
 
 	return 0;
 }
+
+static const struct cpu_ops cpu_x86_model_206ax_ops = {
+	.get_desc	= cpu_x86_get_desc,
+	.get_info	= model_206ax_get_info,
+	.get_count	= model_206ax_get_count,
+};
+
+static const struct udevice_id cpu_x86_model_206ax_ids[] = {
+	{ .compatible = "intel,core-gen3" },
+	{ }
+};
+
+U_BOOT_DRIVER(cpu_x86_model_206ax_drv) = {
+	.name		= "cpu_x86_model_206ax",
+	.id		= UCLASS_CPU,
+	.of_match	= cpu_x86_model_206ax_ids,
+	.bind		= cpu_x86_bind,
+	.probe		= cpu_x86_model_206ax_probe,
+	.ops		= &cpu_x86_model_206ax_ops,
+};
diff --git a/arch/x86/cpu/ivybridge/northbridge.c b/arch/x86/cpu/ivybridge/northbridge.c
index e3d8c13..a066607 100644
--- a/arch/x86/cpu/ivybridge/northbridge.c
+++ b/arch/x86/cpu/ivybridge/northbridge.c
@@ -8,6 +8,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <asm/msr.h>
 #include <asm/acpi.h>
 #include <asm/cpu.h>
@@ -18,23 +19,17 @@
 #include <asm/arch/model_206ax.h>
 #include <asm/arch/sandybridge.h>
 
-static int bridge_revision_id = -1;
-
-int bridge_silicon_revision(void)
+int bridge_silicon_revision(struct udevice *dev)
 {
-	if (bridge_revision_id < 0) {
-		struct cpuid_result result;
-		uint8_t stepping, bridge_id;
-		pci_dev_t dev;
-
-		result = cpuid(1);
-		stepping = result.eax & 0xf;
-		dev = PCI_BDF(0, 0, 0);
-		bridge_id = x86_pci_read_config16(dev, PCI_DEVICE_ID) & 0xf0;
-		bridge_revision_id = bridge_id | stepping;
-	}
-
-	return bridge_revision_id;
+	struct cpuid_result result;
+	u16 bridge_id;
+	u8 stepping;
+
+	result = cpuid(1);
+	stepping = result.eax & 0xf;
+	dm_pci_read_config16(dev, PCI_DEVICE_ID, &bridge_id);
+	bridge_id &= 0xf0;
+	return bridge_id | stepping;
 }
 
 /*
@@ -47,15 +42,14 @@ int bridge_silicon_revision(void)
 static const int legacy_hole_base_k = 0xa0000 / 1024;
 static const int legacy_hole_size_k = 384;
 
-static int get_pcie_bar(u32 *base, u32 *len)
+static int get_pcie_bar(struct udevice *dev, u32 *base, u32 *len)
 {
-	pci_dev_t dev = PCI_BDF(0, 0, 0);
 	u32 pciexbar_reg;
 
 	*base = 0;
 	*len = 0;
 
-	pciexbar_reg = x86_pci_read_config32(dev, PCIEXBAR);
+	dm_pci_read_config32(dev, PCIEXBAR, &pciexbar_reg);
 
 	if (!(pciexbar_reg & (1 << 0)))
 		return 0;
@@ -81,55 +75,55 @@ static int get_pcie_bar(u32 *base, u32 *len)
 	return 0;
 }
 
-static void add_fixed_resources(pci_dev_t dev, int index)
+static void add_fixed_resources(struct udevice *dev, int index)
 {
 	u32 pcie_config_base, pcie_config_size;
 
-	if (get_pcie_bar(&pcie_config_base, &pcie_config_size)) {
+	if (get_pcie_bar(dev, &pcie_config_base, &pcie_config_size)) {
 		debug("Adding PCIe config bar base=0x%08x size=0x%x\n",
 		      pcie_config_base, pcie_config_size);
 	}
 }
 
-static void northbridge_dmi_init(pci_dev_t dev)
+static void northbridge_dmi_init(struct udevice *dev, int rev)
 {
 	/* Clear error status bits */
 	writel(0xffffffff, DMIBAR_REG(0x1c4));
 	writel(0xffffffff, DMIBAR_REG(0x1d0));
 
 	/* Steps prior to DMI ASPM */
-	if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) {
+	if ((rev & BASE_REV_MASK) == BASE_REV_SNB) {
 		clrsetbits_le32(DMIBAR_REG(0x250), (1 << 22) | (1 << 20),
 				1 << 21);
 	}
 
 	setbits_le32(DMIBAR_REG(0x238), 1 << 29);
 
-	if (bridge_silicon_revision() >= SNB_STEP_D0) {
+	if (rev >= SNB_STEP_D0) {
 		setbits_le32(DMIBAR_REG(0x1f8), 1 << 16);
-	} else if (bridge_silicon_revision() >= SNB_STEP_D1) {
+	} else if (rev >= SNB_STEP_D1) {
 		clrsetbits_le32(DMIBAR_REG(0x1f8), 1 << 26, 1 << 16);
 		setbits_le32(DMIBAR_REG(0x1fc), (1 << 12) | (1 << 23));
 	}
 
 	/* Enable ASPM on SNB link, should happen before PCH link */
-	if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB)
+	if ((rev & BASE_REV_MASK) == BASE_REV_SNB)
 		setbits_le32(DMIBAR_REG(0xd04), 1 << 4);
 
 	setbits_le32(DMIBAR_REG(0x88), (1 << 1) | (1 << 0));
 }
 
-void northbridge_init(pci_dev_t dev)
+static void northbridge_init(struct udevice *dev, int rev)
 {
 	u32 bridge_type;
 
 	add_fixed_resources(dev, 6);
-	northbridge_dmi_init(dev);
+	northbridge_dmi_init(dev, rev);
 
 	bridge_type = readl(MCHBAR_REG(0x5f10));
 	bridge_type &= ~0xff;
 
-	if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_IVB) {
+	if ((rev & BASE_REV_MASK) == BASE_REV_IVB) {
 		/* Enable Power Aware Interrupt Routing - fixed priority */
 		clrsetbits_8(MCHBAR_REG(0x5418), 0xf, 0x4);
 
@@ -167,6 +161,78 @@ void northbridge_init(pci_dev_t dev)
 	writel(0x00100001, MCHBAR_REG(0x5500));
 }
 
-void northbridge_enable(pci_dev_t dev)
+static void sandybridge_setup_northbridge_bars(struct udevice *dev)
+{
+	/* Set up all hardcoded northbridge BARs */
+	debug("Setting up static registers\n");
+	dm_pci_write_config32(dev, EPBAR, DEFAULT_EPBAR | 1);
+	dm_pci_write_config32(dev, EPBAR + 4, (0LL + DEFAULT_EPBAR) >> 32);
+	dm_pci_write_config32(dev, MCHBAR, DEFAULT_MCHBAR | 1);
+	dm_pci_write_config32(dev, MCHBAR + 4, (0LL + DEFAULT_MCHBAR) >> 32);
+	/* 64MB - busses 0-63 */
+	dm_pci_write_config32(dev, PCIEXBAR, DEFAULT_PCIEXBAR | 5);
+	dm_pci_write_config32(dev, PCIEXBAR + 4,
+			      (0LL + DEFAULT_PCIEXBAR) >> 32);
+	dm_pci_write_config32(dev, DMIBAR, DEFAULT_DMIBAR | 1);
+	dm_pci_write_config32(dev, DMIBAR + 4, (0LL + DEFAULT_DMIBAR) >> 32);
+
+	/* Set C0000-FFFFF to access RAM on both reads and writes */
+	dm_pci_write_config8(dev, PAM0, 0x30);
+	dm_pci_write_config8(dev, PAM1, 0x33);
+	dm_pci_write_config8(dev, PAM2, 0x33);
+	dm_pci_write_config8(dev, PAM3, 0x33);
+	dm_pci_write_config8(dev, PAM4, 0x33);
+	dm_pci_write_config8(dev, PAM5, 0x33);
+	dm_pci_write_config8(dev, PAM6, 0x33);
+}
+
+static int bd82x6x_northbridge_early_init(struct udevice *dev)
+{
+	const int chipset_type = SANDYBRIDGE_MOBILE;
+	u32 capid0_a;
+	u8 reg8;
+
+	/* Device ID Override Enable should be done very early */
+	dm_pci_read_config32(dev, 0xe4, &capid0_a);
+	if (capid0_a & (1 << 10)) {
+		dm_pci_read_config8(dev, 0xf3, &reg8);
+		reg8 &= ~7; /* Clear 2:0 */
+
+		if (chipset_type == SANDYBRIDGE_MOBILE)
+			reg8 |= 1; /* Set bit 0 */
+
+		dm_pci_write_config8(dev, 0xf3, reg8);
+	}
+
+	sandybridge_setup_northbridge_bars(dev);
+
+	/* Device Enable */
+	dm_pci_write_config32(dev, DEVEN, DEVEN_HOST | DEVEN_IGD);
+
+	return 0;
+}
+
+static int bd82x6x_northbridge_probe(struct udevice *dev)
 {
+	int rev;
+
+	if (!(gd->flags & GD_FLG_RELOC))
+		return bd82x6x_northbridge_early_init(dev);
+
+	rev = bridge_silicon_revision(dev);
+	northbridge_init(dev, rev);
+
+	return 0;
 }
+
+static const struct udevice_id bd82x6x_northbridge_ids[] = {
+	{ .compatible = "intel,bd82x6x-northbridge" },
+	{ }
+};
+
+U_BOOT_DRIVER(bd82x6x_northbridge_drv) = {
+	.name		= "bd82x6x_northbridge",
+	.id		= UCLASS_NORTHBRIDGE,
+	.of_match	= bd82x6x_northbridge_ids,
+	.probe		= bd82x6x_northbridge_probe,
+};
diff --git a/arch/x86/cpu/ivybridge/pch.c b/arch/x86/cpu/ivybridge/pch.c
deleted file mode 100644
index bbab646..0000000
--- a/arch/x86/cpu/ivybridge/pch.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * From Coreboot
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2012 The Chromium OS Authors.
- *
- * SPDX-License-Identifier:	GPL-2.0
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <asm/arch/pch.h>
-
-static int pch_revision_id = -1;
-static int pch_type = -1;
-
-int pch_silicon_revision(void)
-{
-	pci_dev_t dev;
-
-	dev = PCH_LPC_DEV;
-
-	if (pch_revision_id < 0)
-		pch_revision_id = x86_pci_read_config8(dev, PCI_REVISION_ID);
-	return pch_revision_id;
-}
-
-int pch_silicon_type(void)
-{
-	pci_dev_t dev;
-
-	dev = PCH_LPC_DEV;
-
-	if (pch_type < 0)
-		pch_type = x86_pci_read_config8(dev, PCI_DEVICE_ID + 1);
-	return pch_type;
-}
-
-int pch_silicon_supported(int type, int rev)
-{
-	int cur_type = pch_silicon_type();
-	int cur_rev = pch_silicon_revision();
-
-	switch (type) {
-	case PCH_TYPE_CPT:
-		/* CougarPoint minimum revision */
-		if (cur_type == PCH_TYPE_CPT && cur_rev >= rev)
-			return 1;
-		/* PantherPoint any revision */
-		if (cur_type == PCH_TYPE_PPT)
-			return 1;
-		break;
-
-	case PCH_TYPE_PPT:
-		/* PantherPoint minimum revision */
-		if (cur_type == PCH_TYPE_PPT && cur_rev >= rev)
-			return 1;
-		break;
-	}
-
-	return 0;
-}
-
-#define IOBP_RETRY 1000
-static inline int iobp_poll(void)
-{
-	unsigned try = IOBP_RETRY;
-	u32 data;
-
-	while (try--) {
-		data = readl(RCB_REG(IOBPS));
-		if ((data & 1) == 0)
-			return 1;
-		udelay(10);
-	}
-
-	printf("IOBP timeout\n");
-	return 0;
-}
-
-void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue)
-{
-	u32 data;
-
-	/* Set the address */
-	writel(address, RCB_REG(IOBPIRI));
-
-	/* READ OPCODE */
-	if (pch_silicon_supported(PCH_TYPE_CPT, PCH_STEP_B0))
-		writel(IOBPS_RW_BX, RCB_REG(IOBPS));
-	else
-		writel(IOBPS_READ_AX, RCB_REG(IOBPS));
-	if (!iobp_poll())
-		return;
-
-	/* Read IOBP data */
-	data = readl(RCB_REG(IOBPD));
-	if (!iobp_poll())
-		return;
-
-	/* Check for successful transaction */
-	if ((readl(RCB_REG(IOBPS)) & 0x6) != 0) {
-		printf("IOBP read 0x%08x failed\n", address);
-		return;
-	}
-
-	/* Update the data */
-	data &= andvalue;
-	data |= orvalue;
-
-	/* WRITE OPCODE */
-	if (pch_silicon_supported(PCH_TYPE_CPT, PCH_STEP_B0))
-		writel(IOBPS_RW_BX, RCB_REG(IOBPS));
-	else
-		writel(IOBPS_WRITE_AX, RCB_REG(IOBPS));
-	if (!iobp_poll())
-		return;
-
-	/* Write IOBP data */
-	writel(data, RCB_REG(IOBPD));
-	if (!iobp_poll())
-		return;
-}
diff --git a/arch/x86/cpu/ivybridge/pci.c b/arch/x86/cpu/ivybridge/pci.c
deleted file mode 100644
index 5e90f30..0000000
--- a/arch/x86/cpu/ivybridge/pci.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2008,2009
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <dm.h>
-#include <pci.h>
-#include <asm/pci.h>
-#include <asm/post.h>
-#include <asm/arch/bd82x6x.h>
-#include <asm/arch/pch.h>
-
-static int pci_ivybridge_probe(struct udevice *bus)
-{
-	struct pci_controller *hose = dev_get_uclass_priv(bus);
-	pci_dev_t dev;
-	u16 reg16;
-
-	if (!(gd->flags & GD_FLG_RELOC))
-		return 0;
-	post_code(0x50);
-	bd82x6x_init();
-	post_code(0x51);
-
-	reg16 = 0xff;
-	dev = PCH_DEV;
-	reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
-	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	x86_pci_write_config16(dev, PCI_COMMAND, reg16);
-
-	/*
-	* Clear non-reserved bits in status register.
-	*/
-	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
-	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
-	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-	pci_write_bar32(hose, dev, 0, 0xf0000000);
-	post_code(0x52);
-
-	return 0;
-}
-
-static const struct dm_pci_ops pci_ivybridge_ops = {
-	.read_config	= pci_x86_read_config,
-	.write_config	= pci_x86_write_config,
-};
-
-static const struct udevice_id pci_ivybridge_ids[] = {
-	{ .compatible = "intel,pci-ivybridge" },
-	{ }
-};
-
-U_BOOT_DRIVER(pci_ivybridge_drv) = {
-	.name		= "pci_ivybridge",
-	.id		= UCLASS_PCI,
-	.of_match	= pci_ivybridge_ids,
-	.ops		= &pci_ivybridge_ops,
-	.probe		= pci_ivybridge_probe,
-};
diff --git a/arch/x86/cpu/ivybridge/report_platform.c b/arch/x86/cpu/ivybridge/report_platform.c
index 4493870..c78322a 100644
--- a/arch/x86/cpu/ivybridge/report_platform.c
+++ b/arch/x86/cpu/ivybridge/report_platform.c
@@ -10,6 +10,7 @@
 #include <asm/cpu.h>
 #include <asm/pci.h>
 #include <asm/arch/pch.h>
+#include <asm/arch/sandybridge.h>
 
 static void report_cpu_info(void)
 {
@@ -63,27 +64,27 @@ static struct {
 	{0x1E5F, "NM70"},
 };
 
-static void report_pch_info(void)
+static void report_pch_info(struct udevice *dev)
 {
 	const char *pch_type = "Unknown";
 	int i;
 	u16 dev_id;
 	uint8_t rev_id;
 
-	dev_id = x86_pci_read_config16(PCH_LPC_DEV, 2);
+	dm_pci_read_config16(dev, 2, &dev_id);
 	for (i = 0; i < ARRAY_SIZE(pch_table); i++) {
 		if (pch_table[i].dev_id == dev_id) {
 			pch_type = pch_table[i].dev_name;
 			break;
 		}
 	}
-	rev_id = x86_pci_read_config8(PCH_LPC_DEV, 8);
+	dm_pci_read_config8(dev, 8, &rev_id);
 	debug("PCH type: %s, device id: %x, rev id %x\n", pch_type, dev_id,
 	      rev_id);
 }
 
-void report_platform_info(void)
+void report_platform_info(struct udevice *dev)
 {
 	report_cpu_info();
-	report_pch_info();
+	report_pch_info(dev);
 }
diff --git a/arch/x86/cpu/ivybridge/sata.c b/arch/x86/cpu/ivybridge/sata.c
index e7bf03c..a59d9ed 100644
--- a/arch/x86/cpu/ivybridge/sata.c
+++ b/arch/x86/cpu/ivybridge/sata.c
@@ -6,48 +6,56 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <fdtdec.h>
 #include <asm/io.h>
 #include <asm/pci.h>
 #include <asm/arch/pch.h>
 #include <asm/arch/bd82x6x.h>
 
-static inline u32 sir_read(pci_dev_t dev, int idx)
+DECLARE_GLOBAL_DATA_PTR;
+
+static inline u32 sir_read(struct udevice *dev, int idx)
 {
-	x86_pci_write_config32(dev, SATA_SIRI, idx);
-	return x86_pci_read_config32(dev, SATA_SIRD);
+	u32 data;
+
+	dm_pci_write_config32(dev, SATA_SIRI, idx);
+	dm_pci_read_config32(dev, SATA_SIRD, &data);
+
+	return data;
 }
 
-static inline void sir_write(pci_dev_t dev, int idx, u32 value)
+static inline void sir_write(struct udevice *dev, int idx, u32 value)
 {
-	x86_pci_write_config32(dev, SATA_SIRI, idx);
-	x86_pci_write_config32(dev, SATA_SIRD, value);
+	dm_pci_write_config32(dev, SATA_SIRI, idx);
+	dm_pci_write_config32(dev, SATA_SIRD, value);
 }
 
-static void common_sata_init(pci_dev_t dev, unsigned int port_map)
+static void common_sata_init(struct udevice *dev, unsigned int port_map)
 {
 	u32 reg32;
 	u16 reg16;
 
 	/* Set IDE I/O Configuration */
 	reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
-	x86_pci_write_config32(dev, IDE_CONFIG, reg32);
+	dm_pci_write_config32(dev, IDE_CONFIG, reg32);
 
 	/* Port enable */
-	reg16 = x86_pci_read_config16(dev, 0x92);
+	dm_pci_read_config16(dev, 0x92, &reg16);
 	reg16 &= ~0x3f;
 	reg16 |= port_map;
-	x86_pci_write_config16(dev, 0x92, reg16);
+	dm_pci_write_config16(dev, 0x92, reg16);
 
 	/* SATA Initialization register */
 	port_map &= 0xff;
-	x86_pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
+	dm_pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
 }
 
-void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
+static void bd82x6x_sata_init(struct udevice *dev, struct udevice *pch)
 {
 	unsigned int port_map, speed_support, port_tx;
-	struct pci_controller *hose = pci_bus_to_hose(0);
+	const void *blob = gd->fdt_blob;
+	int node = dev->of_offset;
 	const char *mode;
 	u32 reg32;
 	u16 reg16;
@@ -59,33 +67,27 @@ void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
 	speed_support = fdtdec_get_int(blob, node,
 				       "sata_interface_speed_support", 0);
 
-	/* Enable BARs */
-	x86_pci_write_config16(dev, PCI_COMMAND, 0x0007);
-
 	mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
 	if (!mode || !strcmp(mode, "ahci")) {
 		u32 abar;
 
 		debug("SATA: Controller in AHCI mode\n");
 
-		/* Set Interrupt Line, Interrupt Pin is set by D31IP.PIP */
-		x86_pci_write_config8(dev, INTR_LN, 0x0a);
-
 		/* Set timings */
-		x86_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+		dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
 				IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
 				IDE_PPE0 | IDE_IE0 | IDE_TIME0);
-		x86_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+		dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
 				IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
 
 		/* Sync DMA */
-		x86_pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
-		x86_pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
+		dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
+		dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
 
 		common_sata_init(dev, 0x8000 | port_map);
 
 		/* Initialize AHCI memory-mapped space */
-		abar = pci_read_bar32(hose, dev, 5);
+		abar = dm_pci_read_bar32(dev, 5);
 		debug("ABAR: %08X\n", abar);
 		/* CAP (HBA Capabilities) : enable power management */
 		reg32 = readl(abar + 0x00);
@@ -113,59 +115,54 @@ void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
 		debug("SATA: Controller in combined mode\n");
 
 		/* No AHCI: clear AHCI base */
-		pci_write_bar32(hose, dev, 5, 0x00000000);
+		dm_pci_write_bar32(dev, 5, 0x00000000);
 		/* And without AHCI BAR no memory decoding */
-		reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
+		dm_pci_read_config16(dev, PCI_COMMAND, &reg16);
 		reg16 &= ~PCI_COMMAND_MEMORY;
-		x86_pci_write_config16(dev, PCI_COMMAND, reg16);
+		dm_pci_write_config16(dev, PCI_COMMAND, reg16);
 
-		x86_pci_write_config8(dev, 0x09, 0x80);
+		dm_pci_write_config8(dev, 0x09, 0x80);
 
 		/* Set timings */
-		x86_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+		dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
 				IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
-		x86_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+		dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
 				IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
 				IDE_PPE0 | IDE_IE0 | IDE_TIME0);
 
 		/* Sync DMA */
-		x86_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
-		x86_pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
+		dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
+		dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
 
 		common_sata_init(dev, port_map);
 	} else {
 		debug("SATA: Controller in plain-ide mode\n");
 
 		/* No AHCI: clear AHCI base */
-		pci_write_bar32(hose, dev, 5, 0x00000000);
+		dm_pci_write_bar32(dev, 5, 0x00000000);
 
 		/* And without AHCI BAR no memory decoding */
-		reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
+		dm_pci_read_config16(dev, PCI_COMMAND, &reg16);
 		reg16 &= ~PCI_COMMAND_MEMORY;
-		x86_pci_write_config16(dev, PCI_COMMAND, reg16);
+		dm_pci_write_config16(dev, PCI_COMMAND, reg16);
 
 		/*
 		 * Native mode capable on both primary and secondary (0xa)
 		 * OR'ed with enabled (0x50) = 0xf
 		 */
-		x86_pci_write_config8(dev, 0x09, 0x8f);
-
-		/* Set Interrupt Line */
-		/* Interrupt Pin is set by D31IP.PIP */
-		x86_pci_write_config8(dev, INTR_LN, 0xff);
+		dm_pci_write_config8(dev, 0x09, 0x8f);
 
 		/* Set timings */
-		x86_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+		dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
 				IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
 				IDE_PPE0 | IDE_IE0 | IDE_TIME0);
-		x86_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+		dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
 				IDE_SITRE | IDE_ISP_3_CLOCKS |
 				IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
 
 		/* Sync DMA */
-		x86_pci_write_config16(dev, IDE_SDMA_CNT,
-				       IDE_SSDE0 | IDE_PSDE0);
-		x86_pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
+		dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
+		dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
 
 		common_sata_init(dev, port_map);
 	}
@@ -173,11 +170,11 @@ void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
 	/* Set Gen3 Transmitter settings if needed */
 	port_tx = fdtdec_get_int(blob, node, "intel,sata-port0-gen3-tx", 0);
 	if (port_tx)
-		pch_iobp_update(SATA_IOBP_SP0G3IR, 0, port_tx);
+		pch_iobp_update(pch, SATA_IOBP_SP0G3IR, 0, port_tx);
 
 	port_tx = fdtdec_get_int(blob, node, "intel,sata-port1-gen3-tx", 0);
 	if (port_tx)
-		pch_iobp_update(SATA_IOBP_SP1G3IR, 0, port_tx);
+		pch_iobp_update(pch, SATA_IOBP_SP1G3IR, 0, port_tx);
 
 	/* Additional Programming Requirements */
 	sir_write(dev, 0x04, 0x00001600);
@@ -202,12 +199,14 @@ void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
 	sir_write(dev, 0xc8, 0x0c0c0c0c);
 	sir_write(dev, 0xd4, 0x10000000);
 
-	pch_iobp_update(0xea004001, 0x3fffffff, 0xc0000000);
-	pch_iobp_update(0xea00408a, 0xfffffcff, 0x00000100);
+	pch_iobp_update(pch, 0xea004001, 0x3fffffff, 0xc0000000);
+	pch_iobp_update(pch, 0xea00408a, 0xfffffcff, 0x00000100);
 }
 
-void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node)
+static void bd82x6x_sata_enable(struct udevice *dev)
 {
+	const void *blob = gd->fdt_blob;
+	int node = dev->of_offset;
 	unsigned port_map;
 	const char *mode;
 	u16 map = 0;
@@ -222,5 +221,36 @@ void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node)
 	port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
 
 	map |= (port_map ^ 0x3f) << 8;
-	x86_pci_write_config16(dev, 0x90, map);
+	dm_pci_write_config16(dev, 0x90, map);
 }
+
+static int bd82x6x_sata_probe(struct udevice *dev)
+{
+	struct udevice *pch;
+	int ret;
+
+	ret = uclass_first_device(UCLASS_PCH, &pch);
+	if (ret)
+		return ret;
+	if (!pch)
+		return -ENODEV;
+
+	if (!(gd->flags & GD_FLG_RELOC))
+		bd82x6x_sata_enable(dev);
+	else
+		bd82x6x_sata_init(dev, pch);
+
+	return 0;
+}
+
+static const struct udevice_id bd82x6x_ahci_ids[] = {
+	{ .compatible = "intel,pantherpoint-ahci" },
+	{ }
+};
+
+U_BOOT_DRIVER(ahci_ivybridge_drv) = {
+	.name		= "ahci_ivybridge",
+	.id		= UCLASS_DISK,
+	.of_match	= bd82x6x_ahci_ids,
+	.probe		= bd82x6x_sata_probe,
+};
diff --git a/arch/x86/cpu/ivybridge/sdram.c b/arch/x86/cpu/ivybridge/sdram.c
index 4372a5c..e23c422 100644
--- a/arch/x86/cpu/ivybridge/sdram.c
+++ b/arch/x86/cpu/ivybridge/sdram.c
@@ -18,6 +18,8 @@
 #include <rtc.h>
 #include <spi.h>
 #include <spi_flash.h>
+#include <syscon.h>
+#include <asm/cpu.h>
 #include <asm/processor.h>
 #include <asm/gpio.h>
 #include <asm/global_data.h>
@@ -283,22 +285,24 @@ static int recovery_mode_enabled(void)
 /**
  * Find the PEI executable in the ROM and execute it.
  *
- * @param pei_data: configuration data for UEFI PEI reference code
+ * @dev: Northbridge device
+ * @pei_data: configuration data for UEFI PEI reference code
  */
-int sdram_initialise(struct pei_data *pei_data)
+int sdram_initialise(struct udevice *dev, struct udevice *me_dev,
+		     struct pei_data *pei_data)
 {
 	unsigned version;
 	const char *data;
 	uint16_t done;
 	int ret;
 
-	report_platform_info();
+	report_platform_info(dev);
 
 	/* Wait for ME to be ready */
-	ret = intel_early_me_init();
+	ret = intel_early_me_init(me_dev);
 	if (ret)
 		return ret;
-	ret = intel_early_me_uma_size();
+	ret = intel_early_me_uma_size(me_dev);
 	if (ret < 0)
 		return ret;
 
@@ -374,12 +378,12 @@ int sdram_initialise(struct pei_data *pei_data)
 	 * Send ME init done for SandyBridge here.  This is done inside the
 	 * SystemAgent binary on IvyBridge
 	 */
-	done = x86_pci_read_config32(PCH_DEV, PCI_DEVICE_ID);
+	dm_pci_read_config16(dev, PCI_DEVICE_ID, &done);
 	done &= BASE_REV_MASK;
 	if (BASE_REV_SNB == done)
-		intel_early_me_init_done(ME_INIT_STATUS_SUCCESS);
+		intel_early_me_init_done(dev, me_dev, ME_INIT_STATUS_SUCCESS);
 	else
-		intel_early_me_status();
+		intel_early_me_status(me_dev);
 
 	post_system_agent_init(pei_data);
 	report_memory_config();
@@ -495,8 +499,10 @@ static int add_memory_area(struct memory_info *info,
  *
  * This is a bit complicated since on x86 there are system memory holes all
  * over the place. We create a list of available memory blocks
+ *
+ * @dev:	Northbridge device
  */
-static int sdram_find(pci_dev_t dev)
+static int sdram_find(struct udevice *dev)
 {
 	struct memory_info *info = &gd->arch.meminfo;
 	uint32_t tseg_base, uma_size, tolud;
@@ -505,6 +511,7 @@ static int sdram_find(pci_dev_t dev)
 	uint64_t uma_memory_size;
 	unsigned long long tomk;
 	uint16_t ggc;
+	u32 val;
 
 	/* Total Memory 2GB example:
 	 *
@@ -533,24 +540,27 @@ static int sdram_find(pci_dev_t dev)
 	 */
 
 	/* Top of Upper Usable DRAM, including remap */
-	touud = x86_pci_read_config32(dev, TOUUD+4);
-	touud <<= 32;
-	touud |= x86_pci_read_config32(dev, TOUUD);
+	dm_pci_read_config32(dev, TOUUD + 4, &val);
+	touud = (uint64_t)val << 32;
+	dm_pci_read_config32(dev, TOUUD, &val);
+	touud |= val;
 
 	/* Top of Lower Usable DRAM */
-	tolud = x86_pci_read_config32(dev, TOLUD);
+	dm_pci_read_config32(dev, TOLUD, &tolud);
 
 	/* Top of Memory - does not account for any UMA */
-	tom = x86_pci_read_config32(dev, 0xa4);
-	tom <<= 32;
-	tom |= x86_pci_read_config32(dev, 0xa0);
+	dm_pci_read_config32(dev, 0xa4, &val);
+	tom = (uint64_t)val << 32;
+	dm_pci_read_config32(dev, 0xa0, &val);
+	tom |= val;
 
 	debug("TOUUD %llx TOLUD %08x TOM %llx\n", touud, tolud, tom);
 
 	/* ME UMA needs excluding if total memory <4GB */
-	me_base = x86_pci_read_config32(dev, 0x74);
-	me_base <<= 32;
-	me_base |= x86_pci_read_config32(dev, 0x70);
+	dm_pci_read_config32(dev, 0x74, &val);
+	me_base = (uint64_t)val << 32;
+	dm_pci_read_config32(dev, 0x70, &val);
+	me_base |= val;
 
 	debug("MEBASE %llx\n", me_base);
 
@@ -568,7 +578,7 @@ static int sdram_find(pci_dev_t dev)
 	}
 
 	/* Graphics memory comes next */
-	ggc = x86_pci_read_config16(dev, GGC);
+	dm_pci_read_config16(dev, GGC, &ggc);
 	if (!(ggc & 2)) {
 		debug("IGD decoded, subtracting ");
 
@@ -588,7 +598,7 @@ static int sdram_find(pci_dev_t dev)
 	}
 
 	/* Calculate TSEG size from its base which must be below GTT */
-	tseg_base = x86_pci_read_config32(dev, 0xb8);
+	dm_pci_read_config32(dev, 0xb8, &tseg_base);
 	uma_size = (uma_memory_base - tseg_base) >> 10;
 	tomk -= uma_size;
 	uma_memory_base = tomk * 1024ULL;
@@ -723,15 +733,23 @@ int dram_init(void)
 			{ 0, 4, 0x0000 }, /* P13= Empty */
 		},
 	};
-	pci_dev_t dev = PCI_BDF(0, 0, 0);
+	struct udevice *dev, *me_dev;
 	int ret;
 
+	ret = uclass_first_device(UCLASS_NORTHBRIDGE, &dev);
+	if (ret)
+		return ret;
+	if (!dev)
+		return -ENODEV;
+	ret = syscon_get_by_driver_data(X86_SYSCON_ME, &me_dev);
+	if (ret)
+		return ret;
 	debug("Boot mode %d\n", gd->arch.pei_boot_mode);
 	debug("mrc_input %p\n", pei_data.mrc_input);
 	pei_data.boot_mode = gd->arch.pei_boot_mode;
 	ret = copy_spd(&pei_data);
 	if (!ret)
-		ret = sdram_initialise(&pei_data);
+		ret = sdram_initialise(dev, me_dev, &pei_data);
 	if (ret)
 		return ret;
 
diff --git a/arch/x86/cpu/ivybridge/usb_ehci.c b/arch/x86/cpu/ivybridge/usb_ehci.c
deleted file mode 100644
index da11aee..0000000
--- a/arch/x86/cpu/ivybridge/usb_ehci.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * From Coreboot
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * SPDX-License-Identifier:	GPL-2.0
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <asm/arch/pch.h>
-
-void bd82x6x_usb_ehci_init(pci_dev_t dev)
-{
-	u32 reg32;
-
-	/* Disable Wake on Disconnect in RMH */
-	reg32 = readl(RCB_REG(0x35b0));
-	reg32 |= 0x22;
-	writel(reg32, RCB_REG(0x35b0));
-
-	debug("EHCI: Setting up controller.. ");
-	reg32 = x86_pci_read_config32(dev, PCI_COMMAND);
-	reg32 |= PCI_COMMAND_MASTER;
-	/* reg32 |= PCI_COMMAND_SERR; */
-	x86_pci_write_config32(dev, PCI_COMMAND, reg32);
-
-	debug("done.\n");
-}
diff --git a/arch/x86/cpu/ivybridge/usb_xhci.c b/arch/x86/cpu/ivybridge/usb_xhci.c
deleted file mode 100644
index f77b804..0000000
--- a/arch/x86/cpu/ivybridge/usb_xhci.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * From Coreboot
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * SPDX-License-Identifier:	GPL-2.0
- */
-
-#include <common.h>
-#include <asm/pci.h>
-#include <asm/arch/pch.h>
-
-void bd82x6x_usb_xhci_init(pci_dev_t dev)
-{
-	u32 reg32;
-
-	debug("XHCI: Setting up controller.. ");
-
-	/* lock overcurrent map */
-	reg32 = x86_pci_read_config32(dev, 0x44);
-	reg32 |= 1;
-	x86_pci_write_config32(dev, 0x44, reg32);
-
-	/* Enable clock gating */
-	reg32 = x86_pci_read_config32(dev, 0x40);
-	reg32 &= ~((1 << 20) | (1 << 21));
-	reg32 |= (1 << 19) | (1 << 18) | (1 << 17);
-	reg32 |= (1 << 10) | (1 << 9) | (1 << 8);
-	reg32 |= (1 << 31); /* lock */
-	x86_pci_write_config32(dev, 0x40, reg32);
-
-	debug("done.\n");
-}
diff --git a/arch/x86/cpu/qemu/qemu.c b/arch/x86/cpu/qemu/qemu.c
index 46111c9..5a7b929 100644
--- a/arch/x86/cpu/qemu/qemu.c
+++ b/arch/x86/cpu/qemu/qemu.c
@@ -96,11 +96,6 @@ int arch_early_init_r(void)
 	return 0;
 }
 
-int arch_misc_init(void)
-{
-	return pirq_init();
-}
-
 #ifdef CONFIG_GENERATE_MP_TABLE
 int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq)
 {
diff --git a/arch/x86/cpu/quark/Makefile b/arch/x86/cpu/quark/Makefile
index 8f1d018..6d670d7 100644
--- a/arch/x86/cpu/quark/Makefile
+++ b/arch/x86/cpu/quark/Makefile
@@ -4,5 +4,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y += car.o dram.o msg_port.o quark.o
+obj-y += car.o dram.o irq.o msg_port.o quark.o
 obj-y += mrc.o mrc_util.o hte.o smc.o
diff --git a/arch/x86/cpu/quark/irq.c b/arch/x86/cpu/quark/irq.c
new file mode 100644
index 0000000..1f8f909
--- /dev/null
+++ b/arch/x86/cpu/quark/irq.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ * Copyright (C) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/irq.h>
+#include <asm/arch/device.h>
+#include <asm/arch/quark.h>
+
+int quark_irq_router_probe(struct udevice *dev)
+{
+	struct quark_rcba *rcba;
+	u32 base;
+
+	qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base);
+	base &= ~MEM_BAR_EN;
+	rcba = (struct quark_rcba *)base;
+
+	/*
+	 * Route Quark PCI device interrupt pin to PIRQ
+	 *
+	 * Route device#23's INTA/B/C/D to PIRQA/B/C/D
+	 * Route device#20,21's INTA/B/C/D to PIRQE/F/G/H
+	 */
+	writew(PIRQC, &rcba->rmu_ir);
+	writew(PIRQA | (PIRQB << 4) | (PIRQC << 8) | (PIRQD << 12),
+	       &rcba->d23_ir);
+	writew(PIRQD, &rcba->core_ir);
+	writew(PIRQE | (PIRQF << 4) | (PIRQG << 8) | (PIRQH << 12),
+	       &rcba->d20d21_ir);
+
+	return irq_router_common_init(dev);
+}
+
+static const struct udevice_id quark_irq_router_ids[] = {
+	{ .compatible = "intel,quark-irq-router" },
+	{ }
+};
+
+U_BOOT_DRIVER(quark_irq_router_drv) = {
+	.name		= "quark_intel_irq",
+	.id		= UCLASS_IRQ,
+	.of_match	= quark_irq_router_ids,
+	.probe		= quark_irq_router_probe,
+};
diff --git a/arch/x86/cpu/quark/quark.c b/arch/x86/cpu/quark/quark.c
index 72c681d..6e20930 100644
--- a/arch/x86/cpu/quark/quark.c
+++ b/arch/x86/cpu/quark/quark.c
@@ -7,12 +7,10 @@
 #include <common.h>
 #include <mmc.h>
 #include <asm/io.h>
-#include <asm/irq.h>
 #include <asm/mrccache.h>
 #include <asm/mtrr.h>
 #include <asm/pci.h>
 #include <asm/post.h>
-#include <asm/processor.h>
 #include <asm/arch/device.h>
 #include <asm/arch/msg_port.h>
 #include <asm/arch/quark.h>
@@ -346,29 +344,6 @@ int cpu_mmc_init(bd_t *bis)
 	return pci_mmc_init("Quark SDHCI", mmc_supported);
 }
 
-void cpu_irq_init(void)
-{
-	struct quark_rcba *rcba;
-	u32 base;
-
-	qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base);
-	base &= ~MEM_BAR_EN;
-	rcba = (struct quark_rcba *)base;
-
-	/*
-	 * Route Quark PCI device interrupt pin to PIRQ
-	 *
-	 * Route device#23's INTA/B/C/D to PIRQA/B/C/D
-	 * Route device#20,21's INTA/B/C/D to PIRQE/F/G/H
-	 */
-	writew(PIRQC, &rcba->rmu_ir);
-	writew(PIRQA | (PIRQB << 4) | (PIRQC << 8) | (PIRQD << 12),
-	       &rcba->d23_ir);
-	writew(PIRQD, &rcba->core_ir);
-	writew(PIRQE | (PIRQF << 4) | (PIRQG << 8) | (PIRQH << 12),
-	       &rcba->d20d21_ir);
-}
-
 int arch_misc_init(void)
 {
 #ifdef CONFIG_ENABLE_MRC_CACHE
@@ -380,7 +355,7 @@ int arch_misc_init(void)
 	mrccache_save();
 #endif
 
-	return pirq_init();
+	return 0;
 }
 
 void board_final_cleanup(void)
diff --git a/arch/x86/cpu/queensbay/Makefile b/arch/x86/cpu/queensbay/Makefile
index 660f967..af3ffad 100644
--- a/arch/x86/cpu/queensbay/Makefile
+++ b/arch/x86/cpu/queensbay/Makefile
@@ -4,5 +4,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y += fsp_configs.o
+obj-y += fsp_configs.o irq.o
 obj-y += tnc.o topcliff.o
diff --git a/arch/x86/cpu/queensbay/irq.c b/arch/x86/cpu/queensbay/irq.c
new file mode 100644
index 0000000..44369f7
--- /dev/null
+++ b/arch/x86/cpu/queensbay/irq.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ * Copyright (C) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/arch/device.h>
+#include <asm/arch/tnc.h>
+
+int queensbay_irq_router_probe(struct udevice *dev)
+{
+	struct tnc_rcba *rcba;
+	u32 base;
+
+	base = x86_pci_read_config32(TNC_LPC, LPC_RCBA);
+	base &= ~MEM_BAR_EN;
+	rcba = (struct tnc_rcba *)base;
+
+	/* Make sure all internal PCI devices are using INTA */
+	writel(INTA, &rcba->d02ip);
+	writel(INTA, &rcba->d03ip);
+	writel(INTA, &rcba->d27ip);
+	writel(INTA, &rcba->d31ip);
+	writel(INTA, &rcba->d23ip);
+	writel(INTA, &rcba->d24ip);
+	writel(INTA, &rcba->d25ip);
+	writel(INTA, &rcba->d26ip);
+
+	/*
+	 * Route TunnelCreek PCI device interrupt pin to PIRQ
+	 *
+	 * Since PCIe downstream ports received INTx are routed to PIRQ
+	 * A/B/C/D directly and not configurable, we have to route PCIe
+	 * root ports' INTx to PIRQ A/B/C/D as well. For other devices
+	 * on TunneCreek, route them to PIRQ E/F/G/H.
+	 */
+	writew(PIRQE, &rcba->d02ir);
+	writew(PIRQF, &rcba->d03ir);
+	writew(PIRQG, &rcba->d27ir);
+	writew(PIRQH, &rcba->d31ir);
+	writew(PIRQA, &rcba->d23ir);
+	writew(PIRQB, &rcba->d24ir);
+	writew(PIRQC, &rcba->d25ir);
+	writew(PIRQD, &rcba->d26ir);
+
+	return irq_router_common_init(dev);
+}
+
+static const struct udevice_id queensbay_irq_router_ids[] = {
+	{ .compatible = "intel,queensbay-irq-router" },
+	{ }
+};
+
+U_BOOT_DRIVER(queensbay_irq_router_drv) = {
+	.name		= "queensbay_intel_irq",
+	.id		= UCLASS_IRQ,
+	.of_match	= queensbay_irq_router_ids,
+	.probe		= queensbay_irq_router_probe,
+};
diff --git a/arch/x86/cpu/queensbay/tnc.c b/arch/x86/cpu/queensbay/tnc.c
index fb81919..75f7adb 100644
--- a/arch/x86/cpu/queensbay/tnc.c
+++ b/arch/x86/cpu/queensbay/tnc.c
@@ -69,46 +69,9 @@ int arch_early_init_r(void)
 	return 0;
 }
 
-void cpu_irq_init(void)
-{
-	struct tnc_rcba *rcba;
-	u32 base;
-
-	base = x86_pci_read_config32(TNC_LPC, LPC_RCBA);
-	base &= ~MEM_BAR_EN;
-	rcba = (struct tnc_rcba *)base;
-
-	/* Make sure all internal PCI devices are using INTA */
-	writel(INTA, &rcba->d02ip);
-	writel(INTA, &rcba->d03ip);
-	writel(INTA, &rcba->d27ip);
-	writel(INTA, &rcba->d31ip);
-	writel(INTA, &rcba->d23ip);
-	writel(INTA, &rcba->d24ip);
-	writel(INTA, &rcba->d25ip);
-	writel(INTA, &rcba->d26ip);
-
-	/*
-	 * Route TunnelCreek PCI device interrupt pin to PIRQ
-	 *
-	 * Since PCIe downstream ports received INTx are routed to PIRQ
-	 * A/B/C/D directly and not configurable, we have to route PCIe
-	 * root ports' INTx to PIRQ A/B/C/D as well. For other devices
-	 * on TunneCreek, route them to PIRQ E/F/G/H.
-	 */
-	writew(PIRQE, &rcba->d02ir);
-	writew(PIRQF, &rcba->d03ir);
-	writew(PIRQG, &rcba->d27ir);
-	writew(PIRQH, &rcba->d31ir);
-	writew(PIRQA, &rcba->d23ir);
-	writew(PIRQB, &rcba->d24ir);
-	writew(PIRQC, &rcba->d25ir);
-	writew(PIRQD, &rcba->d26ir);
-}
-
 int arch_misc_init(void)
 {
 	unprotect_spi_flash();
 
-	return pirq_init();
+	return 0;
 }
diff --git a/arch/x86/dts/bayleybay.dts b/arch/x86/dts/bayleybay.dts
index d3380de..9bf707b 100644
--- a/arch/x86/dts/bayleybay.dts
+++ b/arch/x86/dts/bayleybay.dts
@@ -65,23 +65,6 @@
 		};
 	};
 
-	spi {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "intel,ich-spi";
-		spi-flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0>;
-			compatible = "winbond,w25q64dw", "spi-flash";
-			memory-map = <0xff800000 0x00800000>;
-			rw-mrc-cache {
-				label = "rw-mrc-cache";
-				reg = <0x006e0000 0x00010000>;
-			};
-		};
-	};
-
 	gpioa {
 		compatible = "intel,ich6-gpio";
 		u-boot,dm-pre-reloc;
@@ -133,66 +116,91 @@
 			  0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
 			  0x01000000 0x0 0x2000 0x2000 0 0xe000>;
 
-		irq-router@1f,0 {
+		pch@1f,0 {
 			reg = <0x0000f800 0 0 0 0>;
-			compatible = "intel,irq-router";
-			intel,pirq-config = "ibase";
-			intel,ibase-offset = <0x50>;
-			intel,pirq-link = <8 8>;
-			intel,pirq-mask = <0xdee0>;
-			intel,pirq-routing = <
-				/* BayTrail PCI devices */
-				PCI_BDF(0, 2, 0) INTA PIRQA
-				PCI_BDF(0, 3, 0) INTA PIRQA
-				PCI_BDF(0, 16, 0) INTA PIRQA
-				PCI_BDF(0, 17, 0) INTA PIRQA
-				PCI_BDF(0, 18, 0) INTA PIRQA
-				PCI_BDF(0, 19, 0) INTA PIRQA
-				PCI_BDF(0, 20, 0) INTA PIRQA
-				PCI_BDF(0, 21, 0) INTA PIRQA
-				PCI_BDF(0, 22, 0) INTA PIRQA
-				PCI_BDF(0, 23, 0) INTA PIRQA
-				PCI_BDF(0, 24, 0) INTA PIRQA
-				PCI_BDF(0, 24, 1) INTC PIRQC
-				PCI_BDF(0, 24, 2) INTD PIRQD
-				PCI_BDF(0, 24, 3) INTB PIRQB
-				PCI_BDF(0, 24, 4) INTA PIRQA
-				PCI_BDF(0, 24, 5) INTC PIRQC
-				PCI_BDF(0, 24, 6) INTD PIRQD
-				PCI_BDF(0, 24, 7) INTB PIRQB
-				PCI_BDF(0, 26, 0) INTA PIRQA
-				PCI_BDF(0, 27, 0) INTA PIRQA
-				PCI_BDF(0, 28, 0) INTA PIRQA
-				PCI_BDF(0, 28, 1) INTB PIRQB
-				PCI_BDF(0, 28, 2) INTC PIRQC
-				PCI_BDF(0, 28, 3) INTD PIRQD
-				PCI_BDF(0, 29, 0) INTA PIRQA
-				PCI_BDF(0, 30, 0) INTA PIRQA
-				PCI_BDF(0, 30, 1) INTD PIRQD
-				PCI_BDF(0, 30, 2) INTB PIRQB
-				PCI_BDF(0, 30, 3) INTC PIRQC
-				PCI_BDF(0, 30, 4) INTD PIRQD
-				PCI_BDF(0, 30, 5) INTB PIRQB
-				PCI_BDF(0, 31, 3) INTB PIRQB
-
-				/* PCIe root ports downstream interrupts */
-				PCI_BDF(1, 0, 0) INTA PIRQA
-				PCI_BDF(1, 0, 0) INTB PIRQB
-				PCI_BDF(1, 0, 0) INTC PIRQC
-				PCI_BDF(1, 0, 0) INTD PIRQD
-				PCI_BDF(2, 0, 0) INTA PIRQB
-				PCI_BDF(2, 0, 0) INTB PIRQC
-				PCI_BDF(2, 0, 0) INTC PIRQD
-				PCI_BDF(2, 0, 0) INTD PIRQA
-				PCI_BDF(3, 0, 0) INTA PIRQC
-				PCI_BDF(3, 0, 0) INTB PIRQD
-				PCI_BDF(3, 0, 0) INTC PIRQA
-				PCI_BDF(3, 0, 0) INTD PIRQB
-				PCI_BDF(4, 0, 0) INTA PIRQD
-				PCI_BDF(4, 0, 0) INTB PIRQA
-				PCI_BDF(4, 0, 0) INTC PIRQB
-				PCI_BDF(4, 0, 0) INTD PIRQC
-			>;
+			compatible = "intel,pch9";
+
+			irq-router {
+				compatible = "intel,irq-router";
+				intel,pirq-config = "ibase";
+				intel,ibase-offset = <0x50>;
+				intel,pirq-link = <8 8>;
+				intel,pirq-mask = <0xdee0>;
+				intel,pirq-routing = <
+					/* BayTrail PCI devices */
+					PCI_BDF(0, 2, 0) INTA PIRQA
+					PCI_BDF(0, 3, 0) INTA PIRQA
+					PCI_BDF(0, 16, 0) INTA PIRQA
+					PCI_BDF(0, 17, 0) INTA PIRQA
+					PCI_BDF(0, 18, 0) INTA PIRQA
+					PCI_BDF(0, 19, 0) INTA PIRQA
+					PCI_BDF(0, 20, 0) INTA PIRQA
+					PCI_BDF(0, 21, 0) INTA PIRQA
+					PCI_BDF(0, 22, 0) INTA PIRQA
+					PCI_BDF(0, 23, 0) INTA PIRQA
+					PCI_BDF(0, 24, 0) INTA PIRQA
+					PCI_BDF(0, 24, 1) INTC PIRQC
+					PCI_BDF(0, 24, 2) INTD PIRQD
+					PCI_BDF(0, 24, 3) INTB PIRQB
+					PCI_BDF(0, 24, 4) INTA PIRQA
+					PCI_BDF(0, 24, 5) INTC PIRQC
+					PCI_BDF(0, 24, 6) INTD PIRQD
+					PCI_BDF(0, 24, 7) INTB PIRQB
+					PCI_BDF(0, 26, 0) INTA PIRQA
+					PCI_BDF(0, 27, 0) INTA PIRQA
+					PCI_BDF(0, 28, 0) INTA PIRQA
+					PCI_BDF(0, 28, 1) INTB PIRQB
+					PCI_BDF(0, 28, 2) INTC PIRQC
+					PCI_BDF(0, 28, 3) INTD PIRQD
+					PCI_BDF(0, 29, 0) INTA PIRQA
+					PCI_BDF(0, 30, 0) INTA PIRQA
+					PCI_BDF(0, 30, 1) INTD PIRQD
+					PCI_BDF(0, 30, 2) INTB PIRQB
+					PCI_BDF(0, 30, 3) INTC PIRQC
+					PCI_BDF(0, 30, 4) INTD PIRQD
+					PCI_BDF(0, 30, 5) INTB PIRQB
+					PCI_BDF(0, 31, 3) INTB PIRQB
+
+					/*
+					 * PCIe root ports downstream
+					 * interrupts
+					 */
+					PCI_BDF(1, 0, 0) INTA PIRQA
+					PCI_BDF(1, 0, 0) INTB PIRQB
+					PCI_BDF(1, 0, 0) INTC PIRQC
+					PCI_BDF(1, 0, 0) INTD PIRQD
+					PCI_BDF(2, 0, 0) INTA PIRQB
+					PCI_BDF(2, 0, 0) INTB PIRQC
+					PCI_BDF(2, 0, 0) INTC PIRQD
+					PCI_BDF(2, 0, 0) INTD PIRQA
+					PCI_BDF(3, 0, 0) INTA PIRQC
+					PCI_BDF(3, 0, 0) INTB PIRQD
+					PCI_BDF(3, 0, 0) INTC PIRQA
+					PCI_BDF(3, 0, 0) INTD PIRQB
+					PCI_BDF(4, 0, 0) INTA PIRQD
+					PCI_BDF(4, 0, 0) INTB PIRQA
+					PCI_BDF(4, 0, 0) INTC PIRQB
+					PCI_BDF(4, 0, 0) INTD PIRQC
+				>;
+			};
+
+			spi {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "intel,ich-spi";
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					reg = <0>;
+					compatible = "winbond,w25q64dw",
+						"spi-flash";
+					memory-map = <0xff800000 0x00800000>;
+					rw-mrc-cache {
+						label = "rw-mrc-cache";
+						reg = <0x006e0000 0x00010000>;
+					};
+				};
+			};
 		};
 	};
 
diff --git a/arch/x86/dts/broadwell_som-6896.dts b/arch/x86/dts/broadwell_som-6896.dts
index 194f0eb..4e9e410 100644
--- a/arch/x86/dts/broadwell_som-6896.dts
+++ b/arch/x86/dts/broadwell_som-6896.dts
@@ -29,16 +29,22 @@
 		ranges = <0x02000000 0x0 0xe0000000 0xe0000000 0 0x10000000
 			0x42000000 0x0 0xd0000000 0xd0000000 0 0x10000000
 			0x01000000 0x0 0x2000 0x2000 0 0xe000>;
-	};
 
-	spi {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "intel,ich-spi";
-		spi-flash@0 {
-			reg = <0>;
-			compatible = "winbond,w25q128", "spi-flash";
-			memory-map = <0xff000000 0x01000000>;
+		pch@1f,0 {
+			reg = <0x0000f800 0 0 0 0>;
+			compatible = "intel,pch9";
+
+			spi {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "intel,ich-spi";
+				spi-flash@0 {
+					reg = <0>;
+					compatible = "winbond,w25q128", "spi-flash";
+					memory-map = <0xff000000 0x01000000>;
+				};
+			};
 		};
 	};
+
 };
diff --git a/arch/x86/dts/chromebook_link.dts b/arch/x86/dts/chromebook_link.dts
index c4469a9..d148d6e 100644
--- a/arch/x86/dts/chromebook_link.dts
+++ b/arch/x86/dts/chromebook_link.dts
@@ -12,12 +12,48 @@
 
 	aliases {
 		spi0 = "/pci/pch/spi";
+		usb0 = &usb_0;
+		usb1 = &usb_1;
 	};
 
 	config {
 	       silent_console = <0>;
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "intel,core-gen3";
+			reg = <0>;
+			intel,apic-id = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "intel,core-gen3";
+			reg = <1>;
+			intel,apic-id = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "intel,core-gen3";
+			reg = <2>;
+			intel,apic-id = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "intel,core-gen3";
+			reg = <3>;
+			intel,apic-id = <3>;
+		};
+
+	};
+
 	gpioa {
 		compatible = "intel,ich6-gpio";
 		u-boot,dm-pre-reloc;
@@ -159,21 +195,22 @@
 	};
 
 	pci {
-		compatible = "intel,pci-ivybridge", "pci-x86";
+		compatible = "pci-x86";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		u-boot,dm-pre-reloc;
 		ranges = <0x02000000 0x0 0xe0000000 0xe0000000 0 0x10000000
 			0x42000000 0x0 0xd0000000 0xd0000000 0 0x10000000
 			0x01000000 0x0 0x1000 0x1000 0 0xefff>;
-		sata {
-			compatible = "intel,pantherpoint-ahci";
-			intel,sata-mode = "ahci";
-			intel,sata-port-map = <1>;
-			intel,sata-port0-gen3-tx = <0x00880a7f>;
+
+		northbridge@0,0 {
+			reg = <0x00000000 0 0 0 0>;
+			compatible = "intel,bd82x6x-northbridge";
+			u-boot,dm-pre-reloc;
 		};
 
-		gma {
+		gma@2,0 {
+			reg = <0x00001000 0 0 0 0>;
 			compatible = "intel,gma";
 			intel,dp_hotplug = <0 0 0x06>;
 			intel,panel-port-select = <1>;
@@ -186,20 +223,35 @@
 			intel,pch-backlight = <0x04000000>;
 		};
 
-		pch {
+		me@16,0 {
+			reg = <0x0000b000 0 0 0 0>;
+			compatible = "intel,me";
+			u-boot,dm-pre-reloc;
+		};
+
+		usb_1: usb@1a,0 {
+			reg = <0x0000d000 0 0 0 0>;
+			compatible = "ehci-pci";
+		};
+
+		usb_0: usb@1d,0 {
+			reg = <0x0000e800 0 0 0 0>;
+			compatible = "ehci-pci";
+		};
+
+		pch@1f,0 {
 			reg = <0x0000f800 0 0 0 0>;
-			compatible = "intel,bd82x6x", "intel,pch";
+			compatible = "intel,bd82x6x", "intel,pch9";
 			u-boot,dm-pre-reloc;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			gen-dec = <0x800 0xfc 0x900 0xfc>;
-			intel,gen-dec = <0x800 0xfc 0x900 0xfc>;
 			intel,pirq-routing = <0x8b 0x8a 0x8b 0x8b
 						0x80 0x80 0x80 0x80>;
 			intel,gpi-routing = <0 0 0 0 0 0 0 2
 						1 0 0 0 0 0 0 0>;
 			/* Enable EC SMI source */
 			intel,alt-gp-smi-enable = <0x0100>;
+
 			spi {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -222,6 +274,8 @@
 				compatible = "intel,bd82x6x-lpc";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				u-boot,dm-pre-reloc;
+				intel,gen-dec = <0x800 0xfc 0x900 0xfc>;
 				cros-ec@200 {
 					compatible = "google,cros-ec";
 					reg = <0x204 1 0x200 1 0x880 0x80>;
@@ -239,6 +293,21 @@
 				};
 			};
 		};
+
+		sata@1f,2 {
+			compatible = "intel,pantherpoint-ahci";
+			reg = <0x0000fa00 0 0 0 0>;
+			u-boot,dm-pre-reloc;
+			intel,sata-mode = "ahci";
+			intel,sata-port-map = <1>;
+			intel,sata-port0-gen3-tx = <0x00880a7f>;
+		};
+
+		smbus: smbus@1f,3 {
+			compatible = "intel,ich-i2c";
+			reg = <0x0000fb00 0 0 0 0>;
+			u-boot,dm-pre-reloc;
+		};
 	};
 
 	tpm {
diff --git a/arch/x86/dts/chromebox_panther.dts b/arch/x86/dts/chromebox_panther.dts
index 4e2b517..2302701 100644
--- a/arch/x86/dts/chromebox_panther.dts
+++ b/arch/x86/dts/chromebox_panther.dts
@@ -51,21 +51,27 @@
 		ranges = <0x02000000 0x0 0xe0000000 0xe0000000 0 0x10000000
 			0x42000000 0x0 0xd0000000 0xd0000000 0 0x10000000
 			0x01000000 0x0 0x1000 0x1000 0 0xf000>;
-	};
 
-	spi {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "intel,ich-spi";
-		spi-flash@0 {
-			#size-cells = <1>;
-			#address-cells = <1>;
-			reg = <0>;
-			compatible = "winbond,w25q64", "spi-flash";
-			memory-map = <0xff800000 0x00800000>;
-			rw-mrc-cache {
-				label = "rw-mrc-cache";
-				reg = <0x003e0000 0x00010000>;
+		pch@1f,0 {
+			reg = <0x0000f800 0 0 0 0>;
+			compatible = "intel,pch9";
+
+			spi {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "intel,ich-spi";
+				spi-flash@0 {
+					#size-cells = <1>;
+					#address-cells = <1>;
+					reg = <0>;
+					compatible = "winbond,w25q64",
+						"spi-flash";
+					memory-map = <0xff800000 0x00800000>;
+					rw-mrc-cache {
+						label = "rw-mrc-cache";
+						reg = <0x003e0000 0x00010000>;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/x86/dts/crownbay.dts b/arch/x86/dts/crownbay.dts
index 84231b3..d6dd0b4 100644
--- a/arch/x86/dts/crownbay.dts
+++ b/arch/x86/dts/crownbay.dts
@@ -72,17 +72,6 @@
 		stdout-path = "/serial";
 	};
 
-	spi {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "intel,ich-spi";
-		spi-flash@0 {
-			reg = <0>;
-			compatible = "sst,25vf016b", "spi-flash";
-			memory-map = <0xffe00000 0x00200000>;
-		};
-	};
-
 	microcode {
 		update@0 {
 #include "microcode/m0220661105_cv.dtsi"
@@ -170,68 +159,85 @@
 			};
 		};
 
-		irq-router@1f,0 {
+		pch@1f,0 {
 			reg = <0x0000f800 0 0 0 0>;
-			compatible = "intel,irq-router";
-			intel,pirq-config = "pci";
-			intel,pirq-link = <0x60 8>;
-			intel,pirq-mask = <0xcee0>;
-			intel,pirq-routing = <
-				/* TunnelCreek PCI devices */
-				PCI_BDF(0, 2, 0) INTA PIRQE
-				PCI_BDF(0, 3, 0) INTA PIRQF
-				PCI_BDF(0, 23, 0) INTA PIRQA
-				PCI_BDF(0, 23, 0) INTB PIRQB
-				PCI_BDF(0, 23, 0) INTC PIRQC
-				PCI_BDF(0, 23, 0) INTD PIRQD
-				PCI_BDF(0, 24, 0) INTA PIRQB
-				PCI_BDF(0, 24, 0) INTB PIRQC
-				PCI_BDF(0, 24, 0) INTC PIRQD
-				PCI_BDF(0, 24, 0) INTD PIRQA
-				PCI_BDF(0, 25, 0) INTA PIRQC
-				PCI_BDF(0, 25, 0) INTB PIRQD
-				PCI_BDF(0, 25, 0) INTC PIRQA
-				PCI_BDF(0, 25, 0) INTD PIRQB
-				PCI_BDF(0, 26, 0) INTA PIRQD
-				PCI_BDF(0, 26, 0) INTB PIRQA
-				PCI_BDF(0, 26, 0) INTC PIRQB
-				PCI_BDF(0, 26, 0) INTD PIRQC
-				PCI_BDF(0, 27, 0) INTA PIRQG
-				/*
-				 * Topcliff PCI devices
-				 *
-				 * Note on the Crown Bay board, Topcliff chipset
-				 * is connected to TunnelCreek PCIe port 0, so
-				 * its bus number is 1 for its PCIe port and 2
-				 * for its PCI devices per U-Boot current PCI
-				 * bus enumeration algorithm.
-				 */
-				PCI_BDF(1, 0, 0) INTA PIRQA
-				PCI_BDF(2, 0, 1) INTA PIRQA
-				PCI_BDF(2, 0, 2) INTA PIRQA
-				PCI_BDF(2, 2, 0) INTB PIRQD
-				PCI_BDF(2, 2, 1) INTB PIRQD
-				PCI_BDF(2, 2, 2) INTB PIRQD
-				PCI_BDF(2, 2, 3) INTB PIRQD
-				PCI_BDF(2, 2, 4) INTB PIRQD
-				PCI_BDF(2, 4, 0) INTC PIRQC
-				PCI_BDF(2, 4, 1) INTC PIRQC
-				PCI_BDF(2, 6, 0) INTD PIRQB
-				PCI_BDF(2, 8, 0) INTA PIRQA
-				PCI_BDF(2, 8, 1) INTA PIRQA
-				PCI_BDF(2, 8, 2) INTA PIRQA
-				PCI_BDF(2, 8, 3) INTA PIRQA
-				PCI_BDF(2, 10, 0) INTB PIRQD
-				PCI_BDF(2, 10, 1) INTB PIRQD
-				PCI_BDF(2, 10, 2) INTB PIRQD
-				PCI_BDF(2, 10, 3) INTB PIRQD
-				PCI_BDF(2, 10, 4) INTB PIRQD
-				PCI_BDF(2, 12, 0) INTC PIRQC
-				PCI_BDF(2, 12, 1) INTC PIRQC
-				PCI_BDF(2, 12, 2) INTC PIRQC
-				PCI_BDF(2, 12, 3) INTC PIRQC
-				PCI_BDF(2, 12, 4) INTC PIRQC
-			>;
+			compatible = "intel,pch7";
+
+			irq-router {
+				compatible = "intel,queensbay-irq-router";
+				intel,pirq-config = "pci";
+				intel,pirq-link = <0x60 8>;
+				intel,pirq-mask = <0xcee0>;
+				intel,pirq-routing = <
+					/* TunnelCreek PCI devices */
+					PCI_BDF(0, 2, 0) INTA PIRQE
+					PCI_BDF(0, 3, 0) INTA PIRQF
+					PCI_BDF(0, 23, 0) INTA PIRQA
+					PCI_BDF(0, 23, 0) INTB PIRQB
+					PCI_BDF(0, 23, 0) INTC PIRQC
+					PCI_BDF(0, 23, 0) INTD PIRQD
+					PCI_BDF(0, 24, 0) INTA PIRQB
+					PCI_BDF(0, 24, 0) INTB PIRQC
+					PCI_BDF(0, 24, 0) INTC PIRQD
+					PCI_BDF(0, 24, 0) INTD PIRQA
+					PCI_BDF(0, 25, 0) INTA PIRQC
+					PCI_BDF(0, 25, 0) INTB PIRQD
+					PCI_BDF(0, 25, 0) INTC PIRQA
+					PCI_BDF(0, 25, 0) INTD PIRQB
+					PCI_BDF(0, 26, 0) INTA PIRQD
+					PCI_BDF(0, 26, 0) INTB PIRQA
+					PCI_BDF(0, 26, 0) INTC PIRQB
+					PCI_BDF(0, 26, 0) INTD PIRQC
+					PCI_BDF(0, 27, 0) INTA PIRQG
+					/*
+					* Topcliff PCI devices
+					*
+					* Note on the Crown Bay board, Topcliff
+					* chipset is connected to TunnelCreek
+					* PCIe port 0, so its bus number is 1
+					* for its PCIe port and 2 for its PCI
+					* devices per U-Boot current PCI bus
+					* enumeration algorithm.
+					*/
+					PCI_BDF(1, 0, 0) INTA PIRQA
+					PCI_BDF(2, 0, 1) INTA PIRQA
+					PCI_BDF(2, 0, 2) INTA PIRQA
+					PCI_BDF(2, 2, 0) INTB PIRQD
+					PCI_BDF(2, 2, 1) INTB PIRQD
+					PCI_BDF(2, 2, 2) INTB PIRQD
+					PCI_BDF(2, 2, 3) INTB PIRQD
+					PCI_BDF(2, 2, 4) INTB PIRQD
+					PCI_BDF(2, 4, 0) INTC PIRQC
+					PCI_BDF(2, 4, 1) INTC PIRQC
+					PCI_BDF(2, 6, 0) INTD PIRQB
+					PCI_BDF(2, 8, 0) INTA PIRQA
+					PCI_BDF(2, 8, 1) INTA PIRQA
+					PCI_BDF(2, 8, 2) INTA PIRQA
+					PCI_BDF(2, 8, 3) INTA PIRQA
+					PCI_BDF(2, 10, 0) INTB PIRQD
+					PCI_BDF(2, 10, 1) INTB PIRQD
+					PCI_BDF(2, 10, 2) INTB PIRQD
+					PCI_BDF(2, 10, 3) INTB PIRQD
+					PCI_BDF(2, 10, 4) INTB PIRQD
+					PCI_BDF(2, 12, 0) INTC PIRQC
+					PCI_BDF(2, 12, 1) INTC PIRQC
+					PCI_BDF(2, 12, 2) INTC PIRQC
+					PCI_BDF(2, 12, 3) INTC PIRQC
+					PCI_BDF(2, 12, 4) INTC PIRQC
+				>;
+			};
+
+			spi {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "intel,ich-spi";
+				spi-flash@0 {
+					reg = <0>;
+					compatible = "sst,25vf016b",
+						"spi-flash";
+					memory-map = <0xffe00000 0x00200000>;
+				};
+			};
 		};
 	};
 
diff --git a/arch/x86/dts/galileo.dts b/arch/x86/dts/galileo.dts
index 55165e1..a2f5a1f 100644
--- a/arch/x86/dts/galileo.dts
+++ b/arch/x86/dts/galileo.dts
@@ -79,37 +79,59 @@
 			current-speed = <115200>;
 		};
 
-		irq-router@1f,0 {
+		pch@1f,0 {
 			reg = <0x0000f800 0 0 0 0>;
-			compatible = "intel,irq-router";
-			intel,pirq-config = "pci";
-			intel,pirq-link = <0x60 8>;
-			intel,pirq-mask = <0xdef8>;
-			intel,pirq-routing = <
-				PCI_BDF(0, 20, 0) INTA PIRQE
-				PCI_BDF(0, 20, 1) INTB PIRQF
-				PCI_BDF(0, 20, 2) INTC PIRQG
-				PCI_BDF(0, 20, 3) INTD PIRQH
-				PCI_BDF(0, 20, 4) INTA PIRQE
-				PCI_BDF(0, 20, 5) INTB PIRQF
-				PCI_BDF(0, 20, 6) INTC PIRQG
-				PCI_BDF(0, 20, 7) INTD PIRQH
-				PCI_BDF(0, 21, 0) INTA PIRQE
-				PCI_BDF(0, 21, 1) INTB PIRQF
-				PCI_BDF(0, 21, 2) INTC PIRQG
-				PCI_BDF(0, 23, 0) INTA PIRQA
-				PCI_BDF(0, 23, 1) INTB PIRQB
-
-				/* PCIe root ports downstream interrupts */
-				PCI_BDF(1, 0, 0) INTA PIRQA
-				PCI_BDF(1, 0, 0) INTB PIRQB
-				PCI_BDF(1, 0, 0) INTC PIRQC
-				PCI_BDF(1, 0, 0) INTD PIRQD
-				PCI_BDF(2, 0, 0) INTA PIRQB
-				PCI_BDF(2, 0, 0) INTB PIRQC
-				PCI_BDF(2, 0, 0) INTC PIRQD
-				PCI_BDF(2, 0, 0) INTD PIRQA
-			>;
+			compatible = "intel,pch7";
+
+			irq-router {
+				compatible = "intel,quark-irq-router";
+				intel,pirq-config = "pci";
+				intel,pirq-link = <0x60 8>;
+				intel,pirq-mask = <0xdef8>;
+				intel,pirq-routing = <
+					PCI_BDF(0, 20, 0) INTA PIRQE
+					PCI_BDF(0, 20, 1) INTB PIRQF
+					PCI_BDF(0, 20, 2) INTC PIRQG
+					PCI_BDF(0, 20, 3) INTD PIRQH
+					PCI_BDF(0, 20, 4) INTA PIRQE
+					PCI_BDF(0, 20, 5) INTB PIRQF
+					PCI_BDF(0, 20, 6) INTC PIRQG
+					PCI_BDF(0, 20, 7) INTD PIRQH
+					PCI_BDF(0, 21, 0) INTA PIRQE
+					PCI_BDF(0, 21, 1) INTB PIRQF
+					PCI_BDF(0, 21, 2) INTC PIRQG
+					PCI_BDF(0, 23, 0) INTA PIRQA
+					PCI_BDF(0, 23, 1) INTB PIRQB
+
+					/* PCIe root ports downstream interrupts */
+					PCI_BDF(1, 0, 0) INTA PIRQA
+					PCI_BDF(1, 0, 0) INTB PIRQB
+					PCI_BDF(1, 0, 0) INTC PIRQC
+					PCI_BDF(1, 0, 0) INTD PIRQD
+					PCI_BDF(2, 0, 0) INTA PIRQB
+					PCI_BDF(2, 0, 0) INTB PIRQC
+					PCI_BDF(2, 0, 0) INTC PIRQD
+					PCI_BDF(2, 0, 0) INTD PIRQA
+				>;
+			};
+
+			spi {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "intel,ich-spi";
+				spi-flash@0 {
+					#size-cells = <1>;
+					#address-cells = <1>;
+					reg = <0>;
+					compatible = "winbond,w25q64",
+						"spi-flash";
+					memory-map = <0xff800000 0x00800000>;
+					rw-mrc-cache {
+						label = "rw-mrc-cache";
+						reg = <0x00010000 0x00010000>;
+					};
+				};
+			};
 		};
 	};
 
@@ -127,21 +149,4 @@
 		bank-name = "B";
 	};
 
-	spi {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "intel,ich-spi";
-		spi-flash@0 {
-			#size-cells = <1>;
-			#address-cells = <1>;
-			reg = <0>;
-			compatible = "winbond,w25q64", "spi-flash";
-			memory-map = <0xff800000 0x00800000>;
-			rw-mrc-cache {
-				label = "rw-mrc-cache";
-				reg = <0x00010000 0x00010000>;
-			};
-		};
-	};
-
 };
diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts
index bbfd6d4..e7ef7c9 100644
--- a/arch/x86/dts/minnowmax.dts
+++ b/arch/x86/dts/minnowmax.dts
@@ -150,66 +150,91 @@
 			  0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
 			  0x01000000 0x0 0x2000 0x2000 0 0xe000>;
 
-		irq-router@1f,0 {
+		pch@1f,0 {
 			reg = <0x0000f800 0 0 0 0>;
-			compatible = "intel,irq-router";
-			intel,pirq-config = "ibase";
-			intel,ibase-offset = <0x50>;
-			intel,pirq-link = <8 8>;
-			intel,pirq-mask = <0xdee0>;
-			intel,pirq-routing = <
-				/* BayTrail PCI devices */
-				PCI_BDF(0, 2, 0) INTA PIRQA
-				PCI_BDF(0, 3, 0) INTA PIRQA
-				PCI_BDF(0, 16, 0) INTA PIRQA
-				PCI_BDF(0, 17, 0) INTA PIRQA
-				PCI_BDF(0, 18, 0) INTA PIRQA
-				PCI_BDF(0, 19, 0) INTA PIRQA
-				PCI_BDF(0, 20, 0) INTA PIRQA
-				PCI_BDF(0, 21, 0) INTA PIRQA
-				PCI_BDF(0, 22, 0) INTA PIRQA
-				PCI_BDF(0, 23, 0) INTA PIRQA
-				PCI_BDF(0, 24, 0) INTA PIRQA
-				PCI_BDF(0, 24, 1) INTC PIRQC
-				PCI_BDF(0, 24, 2) INTD PIRQD
-				PCI_BDF(0, 24, 3) INTB PIRQB
-				PCI_BDF(0, 24, 4) INTA PIRQA
-				PCI_BDF(0, 24, 5) INTC PIRQC
-				PCI_BDF(0, 24, 6) INTD PIRQD
-				PCI_BDF(0, 24, 7) INTB PIRQB
-				PCI_BDF(0, 26, 0) INTA PIRQA
-				PCI_BDF(0, 27, 0) INTA PIRQA
-				PCI_BDF(0, 28, 0) INTA PIRQA
-				PCI_BDF(0, 28, 1) INTB PIRQB
-				PCI_BDF(0, 28, 2) INTC PIRQC
-				PCI_BDF(0, 28, 3) INTD PIRQD
-				PCI_BDF(0, 29, 0) INTA PIRQA
-				PCI_BDF(0, 30, 0) INTA PIRQA
-				PCI_BDF(0, 30, 1) INTD PIRQD
-				PCI_BDF(0, 30, 2) INTB PIRQB
-				PCI_BDF(0, 30, 3) INTC PIRQC
-				PCI_BDF(0, 30, 4) INTD PIRQD
-				PCI_BDF(0, 30, 5) INTB PIRQB
-				PCI_BDF(0, 31, 3) INTB PIRQB
+			compatible = "pci8086,0f1c", "intel,pch9";
 
-				/* PCIe root ports downstream interrupts */
-				PCI_BDF(1, 0, 0) INTA PIRQA
-				PCI_BDF(1, 0, 0) INTB PIRQB
-				PCI_BDF(1, 0, 0) INTC PIRQC
-				PCI_BDF(1, 0, 0) INTD PIRQD
-				PCI_BDF(2, 0, 0) INTA PIRQB
-				PCI_BDF(2, 0, 0) INTB PIRQC
-				PCI_BDF(2, 0, 0) INTC PIRQD
-				PCI_BDF(2, 0, 0) INTD PIRQA
-				PCI_BDF(3, 0, 0) INTA PIRQC
-				PCI_BDF(3, 0, 0) INTB PIRQD
-				PCI_BDF(3, 0, 0) INTC PIRQA
-				PCI_BDF(3, 0, 0) INTD PIRQB
-				PCI_BDF(4, 0, 0) INTA PIRQD
-				PCI_BDF(4, 0, 0) INTB PIRQA
-				PCI_BDF(4, 0, 0) INTC PIRQB
-				PCI_BDF(4, 0, 0) INTD PIRQC
-			>;
+			irq-router {
+				compatible = "intel,irq-router";
+				intel,pirq-config = "ibase";
+				intel,ibase-offset = <0x50>;
+				intel,pirq-link = <8 8>;
+				intel,pirq-mask = <0xdee0>;
+				intel,pirq-routing = <
+					/* BayTrail PCI devices */
+					PCI_BDF(0, 2, 0) INTA PIRQA
+					PCI_BDF(0, 3, 0) INTA PIRQA
+					PCI_BDF(0, 16, 0) INTA PIRQA
+					PCI_BDF(0, 17, 0) INTA PIRQA
+					PCI_BDF(0, 18, 0) INTA PIRQA
+					PCI_BDF(0, 19, 0) INTA PIRQA
+					PCI_BDF(0, 20, 0) INTA PIRQA
+					PCI_BDF(0, 21, 0) INTA PIRQA
+					PCI_BDF(0, 22, 0) INTA PIRQA
+					PCI_BDF(0, 23, 0) INTA PIRQA
+					PCI_BDF(0, 24, 0) INTA PIRQA
+					PCI_BDF(0, 24, 1) INTC PIRQC
+					PCI_BDF(0, 24, 2) INTD PIRQD
+					PCI_BDF(0, 24, 3) INTB PIRQB
+					PCI_BDF(0, 24, 4) INTA PIRQA
+					PCI_BDF(0, 24, 5) INTC PIRQC
+					PCI_BDF(0, 24, 6) INTD PIRQD
+					PCI_BDF(0, 24, 7) INTB PIRQB
+					PCI_BDF(0, 26, 0) INTA PIRQA
+					PCI_BDF(0, 27, 0) INTA PIRQA
+					PCI_BDF(0, 28, 0) INTA PIRQA
+					PCI_BDF(0, 28, 1) INTB PIRQB
+					PCI_BDF(0, 28, 2) INTC PIRQC
+					PCI_BDF(0, 28, 3) INTD PIRQD
+					PCI_BDF(0, 29, 0) INTA PIRQA
+					PCI_BDF(0, 30, 0) INTA PIRQA
+					PCI_BDF(0, 30, 1) INTD PIRQD
+					PCI_BDF(0, 30, 2) INTB PIRQB
+					PCI_BDF(0, 30, 3) INTC PIRQC
+					PCI_BDF(0, 30, 4) INTD PIRQD
+					PCI_BDF(0, 30, 5) INTB PIRQB
+					PCI_BDF(0, 31, 3) INTB PIRQB
+
+					/*
+					 * PCIe root ports downstream
+					 * interrupts
+					 */
+					PCI_BDF(1, 0, 0) INTA PIRQA
+					PCI_BDF(1, 0, 0) INTB PIRQB
+					PCI_BDF(1, 0, 0) INTC PIRQC
+					PCI_BDF(1, 0, 0) INTD PIRQD
+					PCI_BDF(2, 0, 0) INTA PIRQB
+					PCI_BDF(2, 0, 0) INTB PIRQC
+					PCI_BDF(2, 0, 0) INTC PIRQD
+					PCI_BDF(2, 0, 0) INTD PIRQA
+					PCI_BDF(3, 0, 0) INTA PIRQC
+					PCI_BDF(3, 0, 0) INTB PIRQD
+					PCI_BDF(3, 0, 0) INTC PIRQA
+					PCI_BDF(3, 0, 0) INTD PIRQB
+					PCI_BDF(4, 0, 0) INTA PIRQD
+					PCI_BDF(4, 0, 0) INTB PIRQA
+					PCI_BDF(4, 0, 0) INTC PIRQB
+					PCI_BDF(4, 0, 0) INTD PIRQC
+				>;
+			};
+
+			spi {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "intel,ich-spi";
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					reg = <0>;
+					compatible = "stmicro,n25q064a",
+						"spi-flash";
+					memory-map = <0xff800000 0x00800000>;
+					rw-mrc-cache {
+						label = "rw-mrc-cache";
+						reg = <0x006f0000 0x00010000>;
+					};
+				};
+			};
 		};
 	};
 
@@ -269,23 +294,6 @@
 		};
 	};
 
-	spi {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "intel,ich-spi";
-		spi-flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0>;
-			compatible = "stmicro,n25q064a", "spi-flash";
-			memory-map = <0xff800000 0x00800000>;
-			rw-mrc-cache {
-				label = "rw-mrc-cache";
-				reg = <0x006f0000 0x00010000>;
-			};
-		};
-	};
-
 	microcode {
 		update@0 {
 #include "microcode/m0130673322.dtsi"
diff --git a/arch/x86/dts/qemu-x86_i440fx.dts b/arch/x86/dts/qemu-x86_i440fx.dts
index 9086b46..9c3f2a0 100644
--- a/arch/x86/dts/qemu-x86_i440fx.dts
+++ b/arch/x86/dts/qemu-x86_i440fx.dts
@@ -51,18 +51,22 @@
 			0x42000000 0x0 0xd0000000 0xd0000000 0 0x10000000
 			0x01000000 0x0 0x2000 0x2000 0 0xe000>;
 
-		irq-router@1,0 {
+		pch@1,0 {
 			reg = <0x00000800 0 0 0 0>;
-			compatible = "intel,irq-router";
-			intel,pirq-config = "pci";
-			intel,pirq-link = <0x60 4>;
-			intel,pirq-mask = <0x0e40>;
-			intel,pirq-routing = <
-				/* PIIX UHCI */
-				PCI_BDF(0, 1, 2) INTD PIRQD
-				/* e1000 NIC */
-				PCI_BDF(0, 3, 0) INTA PIRQC
-			>;
+			compatible = "intel,pch7";
+
+			irq-router {
+				compatible = "intel,irq-router";
+				intel,pirq-config = "pci";
+				intel,pirq-link = <0x60 4>;
+				intel,pirq-mask = <0x0e40>;
+				intel,pirq-routing = <
+					/* PIIX UHCI */
+					PCI_BDF(0, 1, 2) INTD PIRQD
+					/* e1000 NIC */
+					PCI_BDF(0, 3, 0) INTA PIRQC
+				>;
+			};
 		};
 	};
 
diff --git a/arch/x86/dts/qemu-x86_q35.dts b/arch/x86/dts/qemu-x86_q35.dts
index 145e811..5d601b3 100644
--- a/arch/x86/dts/qemu-x86_q35.dts
+++ b/arch/x86/dts/qemu-x86_q35.dts
@@ -62,24 +62,28 @@
 			0x42000000 0x0 0xd0000000 0xd0000000 0 0x10000000
 			0x01000000 0x0 0x2000 0x2000 0 0xe000>;
 
-		irq-router@1f,0 {
+		pch@1f,0 {
 			reg = <0x0000f800 0 0 0 0>;
-			compatible = "intel,irq-router";
-			intel,pirq-config = "pci";
-			intel,pirq-link = <0x60 8>;
-			intel,pirq-mask = <0x0e40>;
-			intel,pirq-routing = <
-				/* e1000 NIC */
-				PCI_BDF(0, 2, 0) INTA PIRQG
-				/* ICH9 UHCI */
-				PCI_BDF(0, 29, 0) INTA PIRQA
-				PCI_BDF(0, 29, 1) INTB PIRQB
-				PCI_BDF(0, 29, 2) INTC PIRQC
-				/* ICH9 EHCI */
-				PCI_BDF(0, 29, 7) INTD PIRQD
-				/* ICH9 SATA */
-				PCI_BDF(0, 31, 2) INTA PIRQA
-			>;
+			compatible = "intel,pch9";
+
+			irq-router {
+				compatible = "intel,irq-router";
+				intel,pirq-config = "pci";
+				intel,pirq-link = <0x60 8>;
+				intel,pirq-mask = <0x0e40>;
+				intel,pirq-routing = <
+					/* e1000 NIC */
+					PCI_BDF(0, 2, 0) INTA PIRQG
+					/* ICH9 UHCI */
+					PCI_BDF(0, 29, 0) INTA PIRQA
+					PCI_BDF(0, 29, 1) INTB PIRQB
+					PCI_BDF(0, 29, 2) INTC PIRQC
+					/* ICH9 EHCI */
+					PCI_BDF(0, 29, 7) INTD PIRQD
+					/* ICH9 SATA */
+					PCI_BDF(0, 31, 2) INTA PIRQA
+				>;
+			};
 		};
 	};
 
diff --git a/arch/x86/include/asm/arch-ivybridge/bd82x6x.h b/arch/x86/include/asm/arch-ivybridge/bd82x6x.h
index fcdf6e2..e866580 100644
--- a/arch/x86/include/asm/arch-ivybridge/bd82x6x.h
+++ b/arch/x86/include/asm/arch-ivybridge/bd82x6x.h
@@ -7,27 +7,6 @@
 #ifndef _ASM_ARCH_BD82X6X_H
 #define _ASM_ARCH_BD82X6X_H
 
-void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node);
-void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node);
-void bd82x6x_pci_init(pci_dev_t dev);
-void bd82x6x_usb_ehci_init(pci_dev_t dev);
-void bd82x6x_usb_xhci_init(pci_dev_t dev);
-int gma_func0_init(struct udevice *dev, const void *blob, int node);
-int bd82x6x_init(void);
-
-/**
- * struct x86_cpu_priv - Information about a single CPU
- *
- * @apic_id: Advanced Programmable Interrupt Controller Identifier, which is
- * just a number representing the CPU core
- *
- * TODO: Move this to driver model once lifecycle is understood
- */
-struct x86_cpu_priv {
-	int apic_id;
-	int start_err;
-};
-
-int model_206ax_init(struct x86_cpu_priv *cpu);
+int gma_func0_init(struct udevice *dev);
 
 #endif
diff --git a/arch/x86/include/asm/arch-ivybridge/me.h b/arch/x86/include/asm/arch-ivybridge/me.h
index 3a0809d..eb1b73f 100644
--- a/arch/x86/include/asm/arch-ivybridge/me.h
+++ b/arch/x86/include/asm/arch-ivybridge/me.h
@@ -345,12 +345,47 @@ struct __packed me_fwcaps {
 	u8 reserved[3];
 };
 
-/* Defined in me_status.c for both romstage and ramstage */
+/**
+ * intel_me_status() - Check Intel Management Engine status
+ *
+ * struct hfs:	Firmware status
+ * struct gmes:	Management engine status
+ */
 void intel_me_status(struct me_hfs *hfs, struct me_gmes *gmes);
 
-void intel_early_me_status(void);
-int intel_early_me_init(void);
-int intel_early_me_uma_size(void);
-int intel_early_me_init_done(u8 status);
+/**
+ * intel_early_me_status() - Check early Management Engine Status
+ *
+ * @me_dev:	Management engine PCI device
+ */
+void intel_early_me_status(struct udevice *me_dev);
+
+/**
+ * intel_early_me_init() - Early Intel Management Engine init
+ *
+ * @me_dev:	Management engine PCI device
+ * @return 0 if OK, -ve on error
+ */
+int intel_early_me_init(struct udevice *me_dev);
+
+/**
+ * intel_early_me_uma_size() - Get UMA size from the Intel Management Engine
+ *
+ * @me_dev:	Management engine PCI device
+ * @return UMA size if OK, -EINVAL on error
+ */
+int intel_early_me_uma_size(struct udevice *me_dev);
+
+/**
+ * intel_early_me_init_done() - Complete Intel Management Engine init
+ *
+ * @dev:	Northbridge device
+ * @me_dev:	Management engine PCI device
+ * @status:	Status result (ME_INIT_...)
+ * @return 0 to continue to boot, -EINVAL on unknown result data, -ETIMEDOUT
+ * if ME did not respond
+ */
+int intel_early_me_init_done(struct udevice *dev, struct udevice *me_dev,
+			     uint status);
 
 #endif
diff --git a/arch/x86/include/asm/arch-ivybridge/pch.h b/arch/x86/include/asm/arch-ivybridge/pch.h
index 31437c8..af3e8e7 100644
--- a/arch/x86/include/asm/arch-ivybridge/pch.h
+++ b/arch/x86/include/asm/arch-ivybridge/pch.h
@@ -30,11 +30,6 @@
 
 #define SMBUS_IO_BASE		0x0400
 
-int pch_silicon_revision(void);
-int pch_silicon_type(void);
-int pch_silicon_supported(int type, int rev);
-void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue);
-
 #define MAINBOARD_POWER_OFF	0
 #define MAINBOARD_POWER_ON	1
 #define MAINBOARD_POWER_KEEP	2
@@ -470,17 +465,23 @@ void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue);
 #define   DMISCI_STS	(1 << 9)
 #define TCO2_STS	0x66
 
-int lpc_init(struct pci_controller *hose, pci_dev_t dev);
-void lpc_enable(pci_dev_t dev);
+/**
+ * pch_silicon_revision() - Read silicon device ID from the PCH
+ *
+ * @dev:	PCH device
+ * @return silicon device ID
+ */
+int pch_silicon_type(struct udevice *dev);
 
 /**
- * lpc_early_init() - set up LPC serial ports and other early things
+ * pch_pch_iobp_update() - Update a pch register
  *
- * @blob:	Device tree blob
- * @node:	Offset of LPC node
- * @dev:	PCH PCI device containing the LPC
- * @return 0 if OK, -ve on error
+ * @dev:	PCH device
+ * @address:	Address to update
+ * @andvalue:	Value to AND with existing value
+ * @orvalue:	Value to OR with existing value
  */
-int lpc_early_init(const void *blob, int node, pci_dev_t dev);
+void pch_iobp_update(struct udevice *dev, u32 address, u32 andvalue,
+			     u32 orvalue);
 
 #endif
diff --git a/arch/x86/include/asm/arch-ivybridge/sandybridge.h b/arch/x86/include/asm/arch-ivybridge/sandybridge.h
index c960525..d137d67 100644
--- a/arch/x86/include/asm/arch-ivybridge/sandybridge.h
+++ b/arch/x86/include/asm/arch-ivybridge/sandybridge.h
@@ -108,12 +108,15 @@
 
 #define DMIBAR_REG(x)	(DEFAULT_DMIBAR + x)
 
-int bridge_silicon_revision(void);
-
-void northbridge_enable(pci_dev_t dev);
-void northbridge_init(pci_dev_t dev);
+/**
+ * bridge_silicon_revision() - Get the Northbridge revision
+ *
+ * @dev:	Northbridge device
+ * @return revision ID (bits 3:0) and bridge ID (bits 7:4)
+ */
+int bridge_silicon_revision(struct udevice *dev);
 
-void report_platform_info(void);
+void report_platform_info(struct udevice *dev);
 
 void sandybridge_early_init(int chipset_type);
 
diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index c70183c..18b0345 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -45,6 +45,17 @@ enum {
 	GDT_BASE_HIGH_MASK	= 0xf,
 };
 
+/*
+ * System controllers in an x86 system. We mostly need to just find these and
+ * use them on PCI. At some point these might have their own uclass (e.g.
+ * UCLASS_VIDEO for the GMA device).
+ */
+enum {
+	X86_NONE,
+	X86_SYSCON_ME,		/* Intel Management Engine */
+	X86_SYSCON_GMA,		/* Intel Graphics Media Accelerator */
+};
+
 struct cpuid_result {
 	uint32_t eax;
 	uint32_t ebx;
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index 6697da3..5b9e673 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -56,23 +56,10 @@ struct pirq_routing {
 #define PIRQ_BITMAP		0xdef8
 
 /**
- * cpu_irq_init() - Initialize CPU IRQ routing
+ * irq_router_common_init() - Perform common x86 interrupt init
  *
- * This initializes some platform-specific registers related to IRQ routing,
- * like configuring internal PCI devices to use which PCI interrupt pin,
- * and which PCI interrupt pin is mapped to which PIRQ line. Note on some
- * platforms, such IRQ routing might be hard-coded thus cannot configure.
+ * This creates the PIRQ routing table and routes the IRQs
  */
-void cpu_irq_init(void);
-
-/**
- * pirq_init() - Initialize platform PIRQ routing
- *
- * This initializes the PIRQ routing on the platform and configures all PCI
- * devices' interrupt line register to a working IRQ number on the 8259 PIC.
- *
- * @return 0 if OK, -ve on error
- */
-int pirq_init(void);
+int irq_router_common_init(struct udevice *dev);
 
 #endif /* _ARCH_IRQ_H_ */
diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h
index dbf8e95..9c143ca 100644
--- a/arch/x86/include/asm/u-boot-x86.h
+++ b/arch/x86/include/asm/u-boot-x86.h
@@ -77,8 +77,6 @@ uint64_t timer_get_tsc(void);
 
 void quick_ram_check(void);
 
-int x86_init_cpus(void);
-
 #define PCI_VGA_RAM_IMAGE_START		0xc0000
 
 #endif	/* _U_BOOT_I386_H_ */
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index cd5ecb6..d9fc296 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -19,12 +19,12 @@ obj-y	+= lpc-uclass.o
 obj-y	+= mpspec.o
 obj-$(CONFIG_ENABLE_MRC_CACHE) += mrccache.o
 obj-y += cmd_mtrr.o
+obj-y	+= northbridge-uclass.o
 obj-$(CONFIG_I8259_PIC) += i8259.o
 obj-$(CONFIG_I8254_TIMER) += i8254.o
 ifndef CONFIG_DM_PCI
 obj-$(CONFIG_PCI) += pci_type1.o
 endif
-obj-y	+= pch-uclass.o
 obj-y	+= pirq_routing.o
 obj-y	+= relocate.o
 obj-y += physmem.o
diff --git a/arch/x86/lib/mpspec.c b/arch/x86/lib/mpspec.c
index f3ad116..0faa582 100644
--- a/arch/x86/lib/mpspec.c
+++ b/arch/x86/lib/mpspec.c
@@ -292,19 +292,19 @@ static int mptable_add_intsrc(struct mp_config_table *mc,
 	struct mpc_config_intsrc *intsrc_base;
 	int intsrc_entries = 0;
 	const void *blob = gd->fdt_blob;
-	int node;
+	struct udevice *dev;
 	int len, count;
 	const u32 *cell;
-	int i;
+	int i, ret;
 
-	/* Get I/O interrupt information from device tree */
-	node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_IRQ_ROUTER);
-	if (node < 0) {
+	ret = uclass_first_device(UCLASS_IRQ, &dev);
+	if (ret && ret != -ENODEV) {
 		debug("%s: Cannot find irq router node\n", __func__);
-		return -ENOENT;
+		return ret;
 	}
 
-	cell = fdt_getprop(blob, node, "intel,pirq-routing", &len);
+	/* Get I/O interrupt information from device tree */
+	cell = fdt_getprop(blob, dev->of_offset, "intel,pirq-routing", &len);
 	if (!cell)
 		return -ENOENT;
 
diff --git a/arch/x86/lib/mrccache.c b/arch/x86/lib/mrccache.c
index 53a1259..67bace4 100644
--- a/arch/x86/lib/mrccache.c
+++ b/arch/x86/lib/mrccache.c
@@ -243,8 +243,12 @@ int mrccache_save(void)
 		goto err_entry;
 	data  = (struct mrc_data_container *)gd->arch.mrc_output;
 	ret = mrccache_update(sf, &entry, data);
-	if (!ret)
+	if (!ret) {
 		debug("Saved MRC data with checksum %04x\n", data->checksum);
+	} else if (ret == -EEXIST) {
+		debug("MRC data is the same as last time, skipping save\n");
+		ret = 0;
+	}
 
 err_entry:
 	if (ret)
diff --git a/arch/x86/lib/northbridge-uclass.c b/arch/x86/lib/northbridge-uclass.c
new file mode 100644
index 0000000..64b6257
--- /dev/null
+++ b/arch/x86/lib/northbridge-uclass.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/root.h>
+
+UCLASS_DRIVER(northbridge) = {
+	.id		= UCLASS_NORTHBRIDGE,
+	.name		= "northbridge",
+};
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c
index 6a8fca6..e582abb 100644
--- a/board/freescale/b4860qds/b4860qds.c
+++ b/board/freescale/b4860qds/b4860qds.c
@@ -16,7 +16,6 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include <hwconfig.h>
@@ -1023,10 +1022,6 @@ int board_early_init_r(void)
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, flash_esel, BOOKE_PAGESZ_256M, 1);
 
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
 	/*
 	 * Adjust core voltage according to voltage ID
 	 * This function changes I2C mux to channel 2.
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index f1bed51..1bd65a8 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -42,7 +42,7 @@ int __weak board_vdd_drop_compensation(void)
  * The IR chip can show up under the following addresses:
  * 0x08 (Verified on T1040RDB-PA,T4240RDB-PB,X-T4240RDB-16GPA)
  * 0x09 (Verified on T1040RDB-PA)
- * 0x38 (Verified on T2080QDS, T2081QDS)
+ * 0x38 (Verified on T2080QDS, T2081QDS, T4240RDB)
  */
 static int find_ir_chip_on_i2c(void)
 {
@@ -292,7 +292,7 @@ int adjust_vdd(ulong vdd_override)
 		(void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif
 	u32 fusesr;
-	u8 vid;
+	u8 vid, buf;
 	int vdd_target, vdd_current, vdd_last;
 	int ret, i2caddress;
 	unsigned long vdd_string_override;
@@ -346,6 +346,21 @@ int adjust_vdd(ulong vdd_override)
 		debug("VID: IR Chip found on I2C address 0x%02x\n", i2caddress);
 	}
 
+	/* check IR chip work on Intel mode*/
+	ret = i2c_read(i2caddress,
+		       IR36021_INTEL_MODE_OOFSET,
+		       1, (void *)&buf, 1);
+	if (ret) {
+		printf("VID: failed to read IR chip mode.\n");
+		ret = -1;
+		goto exit;
+	}
+	if ((buf & IR36021_MODE_MASK) != IR36021_INTEL_MODE) {
+		printf("VID: IR Chip is not used in Intel mode.\n");
+		ret = -1;
+		goto exit;
+	}
+
 	/* get the voltage ID from fuse status register */
 	fusesr = in_be32(&gur->dcfg_fusesr);
 	/*
diff --git a/board/freescale/common/vid.h b/board/freescale/common/vid.h
index a9c7bb4..9182c20 100644
--- a/board/freescale/common/vid.h
+++ b/board/freescale/common/vid.h
@@ -11,6 +11,10 @@
 #define IR36021_LOOP1_VOUT_OFFSET	0x9A
 #define IR36021_MFR_ID_OFFSET		0x92
 #define IR36021_MFR_ID			0x43
+#define IR36021_INTEL_MODE_OOFSET	0x14
+#define IR36021_MODE_MASK		0x20
+#define IR36021_INTEL_MODE		0x00
+#define IR36021_AMD_MODE		0x20
 
 /* step the IR regulator in 5mV increments */
 #define IR_VDD_STEP_DOWN		5
diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index 6f0fea1..f41985d 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -14,7 +14,6 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 
@@ -125,11 +124,6 @@ int board_early_init_r(void)
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,	/* perms, wimge */
 			0, flash_esel, BOOKE_PAGESZ_256M, 1);	/* ts, esel, tsize, iprot */
 
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
-
 	return 0;
 }
 
diff --git a/board/freescale/mx25pdk/Makefile b/board/freescale/mx25pdk/Makefile
index 0b288f2..02085b6 100644
--- a/board/freescale/mx25pdk/Makefile
+++ b/board/freescale/mx25pdk/Makefile
@@ -7,4 +7,3 @@
 #
 
 obj-y	:= mx25pdk.o
-obj-y	+= lowlevel_init.o
diff --git a/board/freescale/mx25pdk/lowlevel_init.S b/board/freescale/mx25pdk/lowlevel_init.S
deleted file mode 100644
index 8c581b5..0000000
--- a/board/freescale/mx25pdk/lowlevel_init.S
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Copyright (c) 2011  Freescale Semiconductor
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-.globl lowlevel_init
-lowlevel_init:
-
-	mov	pc, lr
diff --git a/board/freescale/mx25pdk/mx25pdk.c b/board/freescale/mx25pdk/mx25pdk.c
index 01dac72..788d3c3 100644
--- a/board/freescale/mx25pdk/mx25pdk.c
+++ b/board/freescale/mx25pdk/mx25pdk.c
@@ -186,3 +186,6 @@ int checkboard(void)
 
 	return 0;
 }
+
+/* Lowlevel init isn't used on mx25pdk, so just provide a dummy one here */
+void lowlevel_init(void) {}
diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c
index f8ae973..bbcc5bb 100644
--- a/board/freescale/mx7dsabresd/mx7dsabresd.c
+++ b/board/freescale/mx7dsabresd/mx7dsabresd.c
@@ -47,6 +47,9 @@ DECLARE_GLOBAL_DATA_PTR;
 #define QSPI_PAD_CTRL	\
 	(PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM)
 
+#define NAND_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
+
+#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM)
 #ifdef CONFIG_SYS_I2C_MXC
 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
 /* I2C1 for PMIC */
@@ -196,6 +199,38 @@ static void iox74lv_init(void)
 	gpio_direction_output(IOX_STCP, 1);
 };
 
+#ifdef CONFIG_NAND_MXS
+static iomux_v3_cfg_t const gpmi_pads[] = {
+	MX7D_PAD_SD3_DATA0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_CLK__NAND_CLE	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_CMD__NAND_ALE	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_STROBE__NAND_RE_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_RESET_B__NAND_WE_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_MCLK__NAND_WP_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_TX_SYNC__NAND_DQS	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	| MUX_PAD_CTRL(NAND_PAD_READY0_CTRL),
+};
+
+static void setup_gpmi_nand(void)
+{
+	imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads));
+
+	/* NAND_USDHC_BUS_CLK is set in rom */
+	set_clk_nand();
+}
+#endif
+
 #ifdef CONFIG_VIDEO_MXS
 static iomux_v3_cfg_t const lcd_pads[] = {
 	MX7D_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
@@ -503,6 +538,10 @@ int board_init(void)
 	setup_fec();
 #endif
 
+#ifdef CONFIG_NAND_MXS
+	setup_gpmi_nand();
+#endif
+
 #ifdef CONFIG_VIDEO_MXS
 	setup_lcd();
 #endif
diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index e600bdb..c6a7242 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -14,7 +14,6 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 
@@ -140,8 +139,6 @@ int board_early_init_r(void)
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, flash_esel, BOOKE_PAGESZ_256M, 1);
 
-	set_liodns();
-	setup_portals();
 	board_config_lanes_mux();
 
 	return 0;
diff --git a/board/freescale/t102xqds/t102xqds.c b/board/freescale/t102xqds/t102xqds.c
index 708afca..76793a1 100644
--- a/board/freescale/t102xqds/t102xqds.c
+++ b/board/freescale/t102xqds/t102xqds.c
@@ -15,7 +15,6 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include <hwconfig.h>
@@ -280,10 +279,6 @@ int board_early_init_r(void)
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
 #endif
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 	board_mux_lane_to_slot();
 	board_retimer_ds125df111_init();
diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c
index fddd240..01dbf38 100644
--- a/board/freescale/t102xrdb/t102xrdb.c
+++ b/board/freescale/t102xrdb/t102xrdb.c
@@ -14,7 +14,6 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include "t102xrdb.h"
@@ -151,10 +150,6 @@ int board_early_init_r(void)
 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
 #endif
 
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
 #ifdef CONFIG_T1024RDB
 	board_mux_lane();
 #endif
diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c
index eaca57f..d7d56b4 100644
--- a/board/freescale/t1040qds/t1040qds.c
+++ b/board/freescale/t1040qds/t1040qds.c
@@ -15,7 +15,6 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include <hwconfig.h>
@@ -153,10 +152,6 @@ int board_early_init_r(void)
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
 #endif
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 
 	return 0;
diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c
index 3227652..ec97677 100644
--- a/board/freescale/t104xrdb/t104xrdb.c
+++ b/board/freescale/t104xrdb/t104xrdb.c
@@ -16,7 +16,6 @@
 #include <asm/fsl_fdt.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include "../common/sleep.h"
@@ -84,11 +83,6 @@ int board_early_init_r(void)
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
 #endif
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
-
 	return 0;
 }
 
diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c
index 7c89cd5..bfea3a1 100644
--- a/board/freescale/t208xqds/t208xqds.c
+++ b/board/freescale/t208xqds/t208xqds.c
@@ -14,7 +14,6 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 
@@ -356,11 +355,6 @@ int board_early_init_r(void)
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
 
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
-
 	/* Disable remote I2C connection to qixis fpga */
 	QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);
 
diff --git a/board/freescale/t208xrdb/t208xrdb.c b/board/freescale/t208xrdb/t208xrdb.c
index 0c2c1c5..0cb05aa 100644
--- a/board/freescale/t208xrdb/t208xrdb.c
+++ b/board/freescale/t208xrdb/t208xrdb.c
@@ -14,7 +14,6 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include "t208xrdb.h"
@@ -81,11 +80,6 @@ int board_early_init_r(void)
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
 
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
-
 	/*
 	 * Adjust core voltage according to voltage ID
 	 * This function changes I2C mux to channel 2.
diff --git a/board/freescale/t4qds/t4240emu.c b/board/freescale/t4qds/t4240emu.c
index 5441094..f1393f2 100644
--- a/board/freescale/t4qds/t4240emu.c
+++ b/board/freescale/t4qds/t4240emu.c
@@ -15,7 +15,6 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -56,11 +55,6 @@ int board_early_init_r(void)
 		MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
 
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
-
 	return 0;
 }
 
diff --git a/board/freescale/t4qds/t4240qds.c b/board/freescale/t4qds/t4240qds.c
index 4f2cccd..d6df144 100644
--- a/board/freescale/t4qds/t4240qds.c
+++ b/board/freescale/t4qds/t4240qds.c
@@ -15,7 +15,6 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 
@@ -552,11 +551,6 @@ int board_early_init_r(void)
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
 
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
-
 	/* Disable remote I2C connection to qixis fpga */
 	QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);
 
diff --git a/board/freescale/t4rdb/t4240rdb.c b/board/freescale/t4rdb/t4240rdb.c
index fac442b..406fb13 100644
--- a/board/freescale/t4rdb/t4240rdb.c
+++ b/board/freescale/t4rdb/t4240rdb.c
@@ -15,12 +15,12 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 
 #include "t4rdb.h"
 #include "cpld.h"
+#include "../common/vid.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -75,10 +75,12 @@ int board_early_init_r(void)
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		0, flash_esel, BOOKE_PAGESZ_256M, 1);
 
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
+	/*
+	 * Adjust core voltage according to voltage ID
+	 * This function changes I2C mux to channel 2.
+	*/
+	if (adjust_vdd(0))
+		printf("Warning: Adjusting core voltage failed.\n");
 
 	return 0;
 }
diff --git a/board/google/chromebook_link/link.c b/board/google/chromebook_link/link.c
index 1b97a8f..d12d742 100644
--- a/board/google/chromebook_link/link.c
+++ b/board/google/chromebook_link/link.c
@@ -14,14 +14,6 @@
 
 int arch_early_init_r(void)
 {
-	struct udevice *dev;
-	int ret;
-
-	/* Make sure the platform controller hub is up and running */
-	ret = uclass_get_device(UCLASS_PCH, 0, &dev);
-	if (ret)
-		return ret;
-
 	return 0;
 }
 
diff --git a/board/renesas/sh7753evb/sh7753evb.c b/board/renesas/sh7753evb/sh7753evb.c
index 9f64945..52a1906 100644
--- a/board/renesas/sh7753evb/sh7753evb.c
+++ b/board/renesas/sh7753evb/sh7753evb.c
@@ -113,6 +113,7 @@ static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string)
 	writel(val, &ether->malr);
 }
 
+#if defined(CONFIG_SH_32BIT)
 /*****************************************************************
  * This PMB must be set on this timing. The lowlevel_init is run on
  * Area 0(phys 0x00000000), so we have to map it.
@@ -154,13 +155,16 @@ static void set_pmb_on_board_init(void)
 	writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7));
 	writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7));
 }
+#endif
 
 int board_init(void)
 {
 	struct gether_control_regs *gether = GETHER_CONTROL_BASE;
 
 	init_gpio();
+#if defined(CONFIG_SH_32BIT)
 	set_pmb_on_board_init();
+#endif
 
 	/* Sets TXnDLY to B'010 */
 	writel(0x00000202, &gether->gbecont);
diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c
index d891a38..eca218c 100644
--- a/board/tqc/tqm834x/tqm834x.c
+++ b/board/tqc/tqm834x/tqm834x.c
@@ -43,7 +43,7 @@ ulong flash_get_size (ulong base, int banknum);
 /* Local functions */
 static int detect_num_flash_banks(void);
 static long int get_ddr_bank_size(short cs, long *base);
-static void set_cs_bounds(short cs, long base, long size);
+static void set_cs_bounds(short cs, ulong base, ulong size);
 static void set_cs_config(short cs, long config);
 static void set_ddr_config(void);
 
@@ -314,7 +314,7 @@ static long int get_ddr_bank_size(short cs, long *base)
 /**************************************************************************
  * Sets DDR bank CS bounds.
  */
-static void set_cs_bounds(short cs, long base, long size)
+static void set_cs_bounds(short cs, ulong base, ulong size)
 {
 	debug("Setting bounds %08lx, %08lx for cs %d\n", base, size, cs);
 	if(size == 0){
diff --git a/cmd/Kconfig b/cmd/Kconfig
new file mode 100644
index 0000000..2ed0263
--- /dev/null
+++ b/cmd/Kconfig
@@ -0,0 +1,585 @@
+menu "Command line interface"
+
+config HUSH_PARSER
+	bool "Use hush shell"
+	select SYS_HUSH_PARSER
+	help
+	  This option enables the "hush" shell (from Busybox) as command line
+	  interpreter, thus enabling powerful command line syntax like
+	  if...then...else...fi conditionals or `&&' and '||'
+	  constructs ("shell scripts").
+
+	  If disabled, you get the old, much simpler behaviour with a somewhat
+	  smaller memory footprint.
+
+config SYS_HUSH_PARSER
+	bool
+	help
+	  Backward compatibility.
+
+config SYS_PROMPT
+	string "Shell prompt"
+	default "=> "
+	help
+	  This string is displayed in the command line to the left of the
+	  cursor.
+
+menu "Autoboot options"
+
+config AUTOBOOT_KEYED
+	bool "Stop autobooting via specific input key / string"
+	default n
+	help
+	  This option enables stopping (aborting) of the automatic
+	  boot feature only by issuing a specific input key or
+	  string. If not enabled, any input key will abort the
+	  U-Boot automatic booting process and bring the device
+	  to the U-Boot prompt for user input.
+
+config AUTOBOOT_PROMPT
+	string "Autoboot stop prompt"
+	depends on AUTOBOOT_KEYED
+	default "Autoboot in %d seconds\\n"
+	help
+	  This string is displayed before the boot delay selected by
+	  CONFIG_BOOTDELAY starts. If it is not defined	there is no
+	  output indicating that autoboot is in progress.
+
+	  Note that this define is used as the (only) argument to a
+	  printf() call, so it may contain '%' format specifications,
+	  provided that it also includes, sepearated by commas exactly
+	  like in a printf statement, the required arguments. It is
+	  the responsibility of the user to select only such arguments
+	  that are valid in the given context.
+
+config AUTOBOOT_ENCRYPTION
+	bool "Enable encryption in autoboot stopping"
+	depends on AUTOBOOT_KEYED
+	default n
+
+config AUTOBOOT_DELAY_STR
+	string "Delay autobooting via specific input key / string"
+	depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
+	help
+	  This option delays the automatic boot feature by issuing
+	  a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
+	  or the environment variable "bootdelaykey" is specified
+	  and this string is received from console input before
+	  autoboot starts booting, U-Boot gives a command prompt. The
+	  U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
+	  used, otherwise it never times out.
+
+config AUTOBOOT_STOP_STR
+	string "Stop autobooting via specific input key / string"
+	depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
+	help
+	  This option enables stopping (aborting) of the automatic
+	  boot feature only by issuing a specific input key or
+	  string. If CONFIG_AUTOBOOT_STOP_STR or the environment
+	  variable "bootstopkey" is specified and this string is
+	  received from console input before autoboot starts booting,
+	  U-Boot gives a command prompt. The U-Boot prompt never
+	  times out, even if CONFIG_BOOT_RETRY_TIME is used.
+
+config AUTOBOOT_KEYED_CTRLC
+	bool "Enable Ctrl-C autoboot interruption"
+	depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
+	default n
+	help
+	  This option allows for the boot sequence to be interrupted
+	  by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
+	  Setting this variable	provides an escape sequence from the
+	  limited "password" strings.
+
+config AUTOBOOT_STOP_STR_SHA256
+	string "Stop autobooting via SHA256 encrypted password"
+	depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
+	help
+	  This option adds the feature to only stop the autobooting,
+	  and therefore boot into the U-Boot prompt, when the input
+	  string / password matches a values that is encypted via
+	  a SHA256 hash and saved in the environment.
+
+endmenu
+
+comment "Commands"
+
+menu "Info commands"
+
+config CMD_BDI
+	bool "bdinfo"
+	default y
+	help
+	  Print board info
+
+config CMD_CONSOLE
+	bool "coninfo"
+	default y
+	help
+	  Print console devices and information.
+
+config CMD_CPU
+	bool "cpu"
+	help
+	  Print information about available CPUs. This normally shows the
+	  number of CPUs, type (e.g. manufacturer, architecture, product or
+	  internal name) and clock frequency. Other information may be
+	  available depending on the CPU driver.
+
+config CMD_LICENSE
+	bool "license"
+	help
+	  Print GPL license text
+
+endmenu
+
+menu "Boot commands"
+
+config CMD_BOOTD
+	bool "bootd"
+	default y
+	help
+	  Run the command stored in the environment "bootcmd", i.e.
+	  "bootd" does the same thing as "run bootcmd".
+
+config CMD_BOOTM
+	bool "bootm"
+	default y
+	help
+	  Boot an application image from the memory.
+
+config CMD_ELF
+	bool "bootelf, bootvx"
+	default y
+	help
+	  Boot an ELF/vxWorks image from the memory.
+
+config CMD_GO
+	bool "go"
+	default y
+	help
+	  Start an application at a given address.
+
+config CMD_RUN
+	bool "run"
+	default y
+	help
+	  Run the command in the given environment variable.
+
+config CMD_IMI
+	bool "iminfo"
+	default y
+	help
+	  Print header information for application image.
+
+config CMD_IMLS
+	bool "imls"
+	default y
+	help
+	  List all images found in flash
+
+config CMD_XIMG
+	bool "imxtract"
+	default y
+	help
+	  Extract a part of a multi-image.
+
+config CMD_POWEROFF
+	bool
+
+endmenu
+
+menu "Environment commands"
+
+config CMD_EXPORTENV
+	bool "env export"
+	default y
+	help
+	  Export environments.
+
+config CMD_IMPORTENV
+	bool "env import"
+	default y
+	help
+	  Import environments.
+
+config CMD_EDITENV
+	bool "editenv"
+	default y
+	help
+	  Edit environment variable.
+
+config CMD_SAVEENV
+	bool "saveenv"
+	default y
+	help
+	  Save all environment variables into the compiled-in persistent
+	  storage.
+
+config CMD_ENV_EXISTS
+	bool "env exists"
+	default y
+	help
+	  Check if a variable is defined in the environment for use in
+	  shell scripting.
+
+endmenu
+
+menu "Memory commands"
+
+config CMD_MEMORY
+	bool "md, mm, nm, mw, cp, cmp, base, loop"
+	default y
+	help
+	  Memeory commands.
+	    md - memory display
+	    mm - memory modify (auto-incrementing address)
+	    nm - memory modify (constant address)
+	    mw - memory write (fill)
+	    cp - memory copy
+	    cmp - memory compare
+	    base - print or set address offset
+	    loop - initinite loop on address range
+
+config CMD_CRC32
+	bool "crc32"
+	default y
+	help
+	  Compute CRC32.
+
+config LOOPW
+	bool "loopw"
+	help
+	  Infinite write loop on address range
+
+config CMD_MEMTEST
+	bool "memtest"
+	help
+	  Simple RAM read/write test.
+
+config CMD_MX_CYCLIC
+	bool "mdc, mwc"
+	help
+	  mdc - memory display cyclic
+	  mwc - memory write cyclic
+
+config CMD_MEMINFO
+	bool "meminfo"
+	help
+	  Display memory information.
+
+endmenu
+
+menu "Device access commands"
+
+config CMD_DM
+	bool "dm - Access to driver model information"
+	depends on DM
+	default y
+	help
+	  Provides access to driver model data structures and information,
+	  such as a list of devices, list of uclasses and the state of each
+	  device (e.g. activated). This is not required for operation, but
+	  can be useful to see the state of driver model for debugging or
+	  interest.
+
+config CMD_DEMO
+	bool "demo - Demonstration commands for driver model"
+	depends on DM
+	help
+	  Provides a 'demo' command which can be used to play around with
+	  driver model. To use this properly you will need to enable one or
+	  both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
+	  Otherwise you will always get an empty list of devices. The demo
+	  devices are defined in the sandbox device tree, so the easiest
+	  option is to use sandbox and pass the -d point to sandbox's
+	  u-boot.dtb file.
+
+config CMD_LOADB
+	bool "loadb"
+	default y
+	help
+	  Load a binary file over serial line.
+
+config CMD_LOADS
+	bool "loads"
+	default y
+	help
+	  Load an S-Record file over serial line
+
+config CMD_FLASH
+	bool "flinfo, erase, protect"
+	default y
+	help
+	  NOR flash support.
+	    flinfo - print FLASH memory information
+	    erase - FLASH memory
+	    protect - enable or disable FLASH write protection
+
+config CMD_ARMFLASH
+	depends on FLASH_CFI_DRIVER
+	bool "armflash"
+	help
+	  ARM Ltd reference designs flash partition access
+
+config CMD_NAND
+	bool "nand"
+	help
+	  NAND support.
+
+config CMD_SF
+	bool "sf"
+	help
+	  SPI Flash support
+
+config CMD_SPI
+	bool "sspi"
+	help
+	  SPI utility command.
+
+config CMD_I2C
+	bool "i2c"
+	help
+	  I2C support.
+
+config CMD_USB
+	bool "usb"
+	help
+	  USB support.
+
+config CMD_FPGA
+	bool "fpga"
+	default y
+	help
+	  FPGA support.
+
+config CMD_REMOTEPROC
+	bool "remoteproc"
+	depends on REMOTEPROC
+	help
+	  Support for Remote Processor control
+
+config CMD_GPIO
+	bool "gpio"
+	help
+	  GPIO support.
+
+endmenu
+
+
+menu "Shell scripting commands"
+
+config CMD_ECHO
+	bool "echo"
+	default y
+	help
+	  Echo args to console
+
+config CMD_ITEST
+	bool "itest"
+	default y
+	help
+	  Return true/false on integer compare.
+
+config CMD_SOURCE
+	bool "source"
+	default y
+	help
+	  Run script from memory
+
+config CMD_SETEXPR
+	bool "setexpr"
+	default y
+	help
+	  Evaluate boolean and math expressions and store the result in an env
+	    variable.
+	  Also supports loading the value at a memory location into a variable.
+	  If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
+
+endmenu
+
+menu "Network commands"
+
+config CMD_NET
+	bool "bootp, tftpboot"
+        select NET
+	default y
+	help
+	  Network commands.
+	  bootp - boot image via network using BOOTP/TFTP protocol
+	  tftpboot - boot image via network using TFTP protocol
+
+config CMD_TFTPPUT
+	bool "tftp put"
+	help
+	  TFTP put command, for uploading files to a server
+
+config CMD_TFTPSRV
+	bool "tftpsrv"
+	help
+	  Act as a TFTP server and boot the first received file
+
+config CMD_RARP
+	bool "rarpboot"
+	help
+	  Boot image via network using RARP/TFTP protocol
+
+config CMD_DHCP
+	bool "dhcp"
+	help
+	  Boot image via network using DHCP/TFTP protocol
+
+config CMD_NFS
+	bool "nfs"
+	default y
+	help
+	  Boot image via network using NFS protocol.
+
+config CMD_PING
+	bool "ping"
+	help
+	  Send ICMP ECHO_REQUEST to network host
+
+config CMD_CDP
+	bool "cdp"
+	help
+	  Perform CDP network configuration
+
+config CMD_SNTP
+	bool "sntp"
+	help
+	  Synchronize RTC via network
+
+config CMD_DNS
+	bool "dns"
+	help
+	  Lookup the IP of a hostname
+
+config CMD_LINK_LOCAL
+	bool "linklocal"
+	help
+	  Acquire a network IP address using the link-local protocol
+
+endmenu
+
+menu "Misc commands"
+
+config CMD_AMBAPP
+	bool "ambapp"
+	depends on LEON3
+	default y
+	help
+	  Lists AMBA Plug-n-Play information.
+
+config SYS_AMBAPP_PRINT_ON_STARTUP
+	bool "Show AMBA PnP info on startup"
+	depends on CMD_AMBAPP
+	default n
+	help
+	  Show AMBA Plug-n-Play information on startup.
+
+config CMD_TIME
+	bool "time"
+	help
+	  Run commands and summarize execution time.
+
+# TODO: rename to CMD_SLEEP
+config CMD_MISC
+	bool "sleep"
+	default y
+	help
+	  Delay execution for some time
+
+config CMD_TIMER
+	bool "timer"
+	help
+	  Access the system timer.
+
+config CMD_SETGETDCR
+	bool "getdcr, setdcr, getidcr, setidcr"
+	depends on 4xx
+	default y
+	help
+	  getdcr - Get an AMCC PPC 4xx DCR's value
+	  setdcr - Set an AMCC PPC 4xx DCR's value
+	  getidcr - Get a register value via indirect DCR addressing
+	  setidcr - Set a register value via indirect DCR addressing
+
+config CMD_SOUND
+	bool "sound"
+	depends on SOUND
+	help
+	  This provides basic access to the U-Boot's sound support. The main
+	  feature is to play a beep.
+
+	     sound init   - set up sound system
+	     sound play   - play a sound
+
+endmenu
+
+config CMD_BOOTSTAGE
+	bool "Enable the 'bootstage' command"
+	depends on BOOTSTAGE
+	help
+	  Add a 'bootstage' command which supports printing a report
+	  and un/stashing of bootstage data.
+
+menu "Power commands"
+config CMD_PMIC
+	bool "Enable Driver Model PMIC command"
+	depends on DM_PMIC
+	help
+	  This is the pmic command, based on a driver model pmic's API.
+	  Command features are unchanged:
+	  - list               - list pmic devices
+	  - pmic dev <id>      - show or [set] operating pmic device (NEW)
+	  - pmic dump          - dump registers
+	  - pmic read address  - read byte of register at address
+	  - pmic write address - write byte to register at address
+	  The only one change for this command is 'dev' subcommand.
+
+config CMD_REGULATOR
+	bool "Enable Driver Model REGULATOR command"
+	depends on DM_REGULATOR
+	help
+	  This command is based on driver model regulator's API.
+	  User interface features:
+	  - list               - list regulator devices
+	  - regulator dev <id> - show or [set] operating regulator device
+	  - regulator info     - print constraints info
+	  - regulator status   - print operating status
+	  - regulator value <val] <-f> - print/[set] voltage value [uV]
+	  - regulator current <val>    - print/[set] current value [uA]
+	  - regulator mode <id>        - print/[set] operating mode id
+	  - regulator enable           - enable the regulator output
+	  - regulator disable          - disable the regulator output
+
+	  The '-f' (force) option can be used for set the value which exceeds
+	  the limits, which are found in device-tree and are kept in regulator's
+	  uclass platdata structure.
+
+endmenu
+
+menu "Security commands"
+config CMD_TPM
+	bool "Enable the 'tpm' command"
+	depends on TPM
+	help
+	  This provides a means to talk to a TPM from the command line. A wide
+	  range of commands if provided - see 'tpm help' for details. The
+	  command requires a suitable TPM on your board and the correct driver
+	  must be enabled.
+
+config CMD_TPM_TEST
+	bool "Enable the 'tpm test' command"
+	depends on CMD_TPM
+	help
+	  This provides a a series of tests to confirm that the TPM is working
+	  correctly. The tests cover initialisation, non-volatile RAM, extend,
+	  global lock and checking that timing is within expectations. The
+	  tests pass correctly on Infineon TPMs but may need to be adjusted
+	  for other devices.
+
+endmenu
+
+endmenu
diff --git a/cmd/Makefile b/cmd/Makefile
new file mode 100644
index 0000000..03f7e0a
--- /dev/null
+++ b/cmd/Makefile
@@ -0,0 +1,166 @@
+#
+# (C) Copyright 2004-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+ifndef CONFIG_SPL_BUILD
+# core command
+obj-y += boot.o
+obj-$(CONFIG_CMD_BOOTM) += bootm.o
+obj-y += help.o
+obj-y += version.o
+
+# command
+obj-$(CONFIG_CMD_AES) += aes.o
+obj-$(CONFIG_CMD_AMBAPP) += ambapp.o
+obj-$(CONFIG_CMD_ARMFLASH) += armflash.o
+obj-$(CONFIG_SOURCE) += source.o
+obj-$(CONFIG_CMD_SOURCE) += source.o
+obj-$(CONFIG_CMD_BDI) += bdinfo.o
+obj-$(CONFIG_CMD_BEDBUG) += bedbug.o
+obj-$(CONFIG_CMD_BMP) += bmp.o
+obj-$(CONFIG_CMD_BOOTMENU) += bootmenu.o
+obj-$(CONFIG_CMD_BOOTLDR) += bootldr.o
+obj-$(CONFIG_CMD_BOOTSTAGE) += bootstage.o
+obj-$(CONFIG_CMD_CACHE) += cache.o
+obj-$(CONFIG_CMD_CBFS) += cbfs.o
+obj-$(CONFIG_CMD_CLK) += clk.o
+obj-$(CONFIG_CMD_CONSOLE) += console.o
+obj-$(CONFIG_CMD_CPLBINFO) += cplbinfo.o
+obj-$(CONFIG_CMD_CPU) += cpu.o
+obj-$(CONFIG_DATAFLASH_MMC_SELECT) += dataflash_mmc_mux.o
+obj-$(CONFIG_CMD_DATE) += date.o
+obj-$(CONFIG_CMD_DEMO) += demo.o
+obj-$(CONFIG_CMD_SOUND) += sound.o
+ifdef CONFIG_4xx
+obj-$(CONFIG_CMD_SETGETDCR) += dcr.o
+endif
+ifdef CONFIG_POST
+obj-$(CONFIG_CMD_DIAG) += diag.o
+endif
+obj-$(CONFIG_CMD_DISPLAY) += display.o
+obj-$(CONFIG_CMD_DTT) += dtt.o
+obj-$(CONFIG_CMD_ECHO) += echo.o
+obj-$(CONFIG_ENV_IS_IN_EEPROM) += eeprom.o
+obj-$(CONFIG_CMD_EEPROM) += eeprom.o
+obj-$(CONFIG_EFI_STUB) += efi.o
+obj-$(CONFIG_CMD_ELF) += elf.o
+obj-$(CONFIG_SYS_HUSH_PARSER) += exit.o
+obj-$(CONFIG_CMD_EXT4) += ext4.o
+obj-$(CONFIG_CMD_EXT2) += ext2.o
+obj-$(CONFIG_CMD_FAT) += fat.o
+obj-$(CONFIG_CMD_FDC) += fdc.o
+obj-$(CONFIG_OF_LIBFDT) += fdt.o
+obj-$(CONFIG_CMD_FITUPD) += fitupd.o
+obj-$(CONFIG_CMD_FLASH) += flash.o
+ifdef CONFIG_FPGA
+obj-$(CONFIG_CMD_FPGA) += fpga.o
+endif
+obj-$(CONFIG_CMD_FPGAD) += fpgad.o
+obj-$(CONFIG_CMD_FS_GENERIC) += fs.o
+obj-$(CONFIG_CMD_FUSE) += fuse.o
+obj-$(CONFIG_CMD_GETTIME) += gettime.o
+obj-$(CONFIG_CMD_GPIO) += gpio.o
+obj-$(CONFIG_CMD_I2C) += i2c.o
+obj-$(CONFIG_CMD_IOTRACE) += iotrace.o
+obj-$(CONFIG_CMD_HASH) += hash.o
+obj-$(CONFIG_CMD_IDE) += ide.o
+obj-$(CONFIG_CMD_IMMAP) += immap.o
+obj-$(CONFIG_CMD_INI) += ini.o
+obj-$(CONFIG_CMD_IRQ) += irq.o
+obj-$(CONFIG_CMD_ITEST) += itest.o
+obj-$(CONFIG_CMD_JFFS2) += jffs2.o
+obj-$(CONFIG_CMD_CRAMFS) += cramfs.o
+obj-$(CONFIG_CMD_LDRINFO) += ldrinfo.o
+obj-$(CONFIG_CMD_LED) += led.o
+obj-$(CONFIG_CMD_LICENSE) += license.o
+obj-y += load.o
+obj-$(CONFIG_LOGBUFFER) += log.o
+obj-$(CONFIG_ID_EEPROM) += mac.o
+obj-$(CONFIG_CMD_MD5SUM) += md5sum.o
+obj-$(CONFIG_CMD_MEMORY) += mem.o
+obj-$(CONFIG_CMD_IO) += io.o
+obj-$(CONFIG_CMD_MFSL) += mfsl.o
+obj-$(CONFIG_CMD_MII) += mii.o
+ifdef CONFIG_PHYLIB
+obj-$(CONFIG_CMD_MII) += mdio.o
+endif
+obj-$(CONFIG_CMD_MISC) += misc.o
+obj-$(CONFIG_CMD_MMC) += mmc.o
+obj-$(CONFIG_CMD_MMC_SPI) += mmc_spi.o
+obj-$(CONFIG_MP) += mp.o
+obj-$(CONFIG_CMD_MTDPARTS) += mtdparts.o
+obj-$(CONFIG_CMD_NAND) += nand.o
+obj-$(CONFIG_CMD_NET) += net.o
+obj-$(CONFIG_CMD_ONENAND) += onenand.o
+obj-$(CONFIG_CMD_OTP) += otp.o
+obj-$(CONFIG_CMD_PART) += part.o
+ifdef CONFIG_PCI
+obj-$(CONFIG_CMD_PCI) += pci.o
+endif
+obj-y += pcmcia.o
+obj-$(CONFIG_CMD_PORTIO) += portio.o
+obj-$(CONFIG_CMD_PXE) += pxe.o
+obj-$(CONFIG_CMD_READ) += read.o
+obj-$(CONFIG_CMD_REGINFO) += reginfo.o
+obj-$(CONFIG_CMD_REISER) += reiser.o
+obj-$(CONFIG_CMD_REMOTEPROC) += remoteproc.o
+obj-$(CONFIG_SANDBOX) += host.o
+obj-$(CONFIG_CMD_SATA) += sata.o
+obj-$(CONFIG_CMD_SF) += sf.o
+obj-$(CONFIG_CMD_SCSI) += scsi.o
+obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o
+obj-$(CONFIG_CMD_SETEXPR) += setexpr.o
+obj-$(CONFIG_CMD_SOFTSWITCH) += softswitch.o
+obj-$(CONFIG_CMD_SPI) += spi.o
+obj-$(CONFIG_CMD_SPIBOOTLDR) += spibootldr.o
+obj-$(CONFIG_CMD_STRINGS) += strings.o
+obj-$(CONFIG_CMD_TERMINAL) += terminal.o
+obj-$(CONFIG_CMD_TIME) += time.o
+obj-$(CONFIG_CMD_TRACE) += trace.o
+obj-$(CONFIG_SYS_HUSH_PARSER) += test.o
+obj-$(CONFIG_CMD_TPM) += tpm.o
+obj-$(CONFIG_CMD_TPM_TEST) += tpm_test.o
+obj-$(CONFIG_CMD_TSI148) += tsi148.o
+obj-$(CONFIG_CMD_UBI) += ubi.o
+obj-$(CONFIG_CMD_UBIFS) += ubifs.o
+obj-$(CONFIG_CMD_UNIVERSE) += universe.o
+obj-$(CONFIG_CMD_UNZIP) += unzip.o
+ifdef CONFIG_LZMA
+obj-$(CONFIG_CMD_LZMADEC) += lzmadec.o
+endif
+
+obj-$(CONFIG_CMD_USB) += usb.o
+obj-$(CONFIG_CMD_FASTBOOT) += fastboot.o
+obj-$(CONFIG_CMD_FS_UUID) += fs_uuid.o
+
+obj-$(CONFIG_CMD_USB_MASS_STORAGE) += usb_mass_storage.o
+obj-$(CONFIG_CMD_THOR_DOWNLOAD) += thordown.o
+obj-$(CONFIG_CMD_XIMG) += ximg.o
+obj-$(CONFIG_YAFFS2) += yaffs2.o
+obj-$(CONFIG_CMD_SPL) += spl.o
+obj-$(CONFIG_CMD_ZIP) += zip.o
+obj-$(CONFIG_CMD_ZFS) += zfs.o
+
+obj-$(CONFIG_CMD_DFU) += dfu.o
+obj-$(CONFIG_CMD_GPT) += gpt.o
+obj-$(CONFIG_CMD_ETHSW) += ethsw.o
+
+# Power
+obj-$(CONFIG_CMD_PMIC) += pmic.o
+obj-$(CONFIG_CMD_REGULATOR) += regulator.o
+endif # !CONFIG_SPL_BUILD
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_SATA_SUPPORT
+obj-$(CONFIG_CMD_SCSI) += scsi.o
+endif
+endif # CONFIG_SPL_BUILD
+
+obj-$(CONFIG_CMD_BLOB) += blob.o
+
+# core command
+obj-y += nvedit.o
+obj-y += disk.o
diff --git a/common/cmd_aes.c b/cmd/aes.c
index 76da3ef..76da3ef 100644
--- a/common/cmd_aes.c
+++ b/cmd/aes.c
diff --git a/common/cmd_ambapp.c b/cmd/ambapp.c
index 4b6d174..4b6d174 100644
--- a/common/cmd_ambapp.c
+++ b/cmd/ambapp.c
diff --git a/common/cmd_armflash.c b/cmd/armflash.c
index b94d128..b94d128 100644
--- a/common/cmd_armflash.c
+++ b/cmd/armflash.c
diff --git a/common/cmd_bdinfo.c b/cmd/bdinfo.c
index deed6d8..deed6d8 100644
--- a/common/cmd_bdinfo.c
+++ b/cmd/bdinfo.c
diff --git a/common/cmd_bedbug.c b/cmd/bedbug.c
index 69afeaf..69afeaf 100644
--- a/common/cmd_bedbug.c
+++ b/cmd/bedbug.c
diff --git a/common/cmd_blob.c b/cmd/blob.c
index ac8b268..ac8b268 100644
--- a/common/cmd_blob.c
+++ b/cmd/blob.c
diff --git a/common/cmd_bmp.c b/cmd/bmp.c
index fd5b7db..fd5b7db 100644
--- a/common/cmd_bmp.c
+++ b/cmd/bmp.c
diff --git a/common/cmd_boot.c b/cmd/boot.c
index 72f2cf3..72f2cf3 100644
--- a/common/cmd_boot.c
+++ b/cmd/boot.c
diff --git a/common/cmd_bootldr.c b/cmd/bootldr.c
index bc5c1f9..bc5c1f9 100644
--- a/common/cmd_bootldr.c
+++ b/cmd/bootldr.c
diff --git a/common/cmd_bootm.c b/cmd/bootm.c
index 48738ac..48738ac 100644
--- a/common/cmd_bootm.c
+++ b/cmd/bootm.c
diff --git a/common/cmd_bootmenu.c b/cmd/bootmenu.c
index 5879065..5879065 100644
--- a/common/cmd_bootmenu.c
+++ b/cmd/bootmenu.c
diff --git a/common/cmd_bootstage.c b/cmd/bootstage.c
index 788ab16..788ab16 100644
--- a/common/cmd_bootstage.c
+++ b/cmd/bootstage.c
diff --git a/common/cmd_cache.c b/cmd/cache.c
index 37ab345..37ab345 100644
--- a/common/cmd_cache.c
+++ b/cmd/cache.c
diff --git a/common/cmd_cbfs.c b/cmd/cbfs.c
index 35d8a7a..35d8a7a 100644
--- a/common/cmd_cbfs.c
+++ b/cmd/cbfs.c
diff --git a/common/cmd_clk.c b/cmd/clk.c
index 6d3d46a..6d3d46a 100644
--- a/common/cmd_clk.c
+++ b/cmd/clk.c
diff --git a/common/cmd_console.c b/cmd/console.c
index 9a356ec..9a356ec 100644
--- a/common/cmd_console.c
+++ b/cmd/console.c
diff --git a/common/cmd_cplbinfo.c b/cmd/cplbinfo.c
index ab5b3b5..ab5b3b5 100644
--- a/common/cmd_cplbinfo.c
+++ b/cmd/cplbinfo.c
diff --git a/common/cmd_cpu.c b/cmd/cpu.c
index b4af64f..b4af64f 100644
--- a/common/cmd_cpu.c
+++ b/cmd/cpu.c
diff --git a/common/cmd_cramfs.c b/cmd/cramfs.c
index 1d31326..1d31326 100644
--- a/common/cmd_cramfs.c
+++ b/cmd/cramfs.c
diff --git a/common/cmd_dataflash_mmc_mux.c b/cmd/dataflash_mmc_mux.c
index 3832248..3832248 100644
--- a/common/cmd_dataflash_mmc_mux.c
+++ b/cmd/dataflash_mmc_mux.c
diff --git a/common/cmd_date.c b/cmd/date.c
index 8714699..8714699 100644
--- a/common/cmd_date.c
+++ b/cmd/date.c
diff --git a/common/cmd_dcr.c b/cmd/dcr.c
index cc77250..cc77250 100644
--- a/common/cmd_dcr.c
+++ b/cmd/dcr.c
diff --git a/common/cmd_demo.c b/cmd/demo.c
index 209dc4a..209dc4a 100644
--- a/common/cmd_demo.c
+++ b/cmd/demo.c
diff --git a/common/cmd_dfu.c b/cmd/dfu.c
index 6d95ce9..6d95ce9 100644
--- a/common/cmd_dfu.c
+++ b/cmd/dfu.c
diff --git a/common/cmd_diag.c b/cmd/diag.c
index 14ae04f..14ae04f 100644
--- a/common/cmd_diag.c
+++ b/cmd/diag.c
diff --git a/common/cmd_disk.c b/cmd/disk.c
index 3025225..3025225 100644
--- a/common/cmd_disk.c
+++ b/cmd/disk.c
diff --git a/common/cmd_display.c b/cmd/display.c
index bc1b1eb..bc1b1eb 100644
--- a/common/cmd_display.c
+++ b/cmd/display.c
diff --git a/common/cmd_dtt.c b/cmd/dtt.c
index f2e750f..dd427a3 100644
--- a/common/cmd_dtt.c
+++ b/cmd/dtt.c
@@ -12,6 +12,7 @@
 #include <dtt.h>
 #include <i2c.h>
 #include <tmu.h>
+#include <linux/bug.h>
 
 #if defined CONFIG_DTT_SENSORS
 static unsigned long sensor_initialized;
diff --git a/common/cmd_echo.c b/cmd/echo.c
index 3dc3a63..3dc3a63 100644
--- a/common/cmd_echo.c
+++ b/cmd/echo.c
diff --git a/common/cmd_eeprom.c b/cmd/eeprom.c
index 571240a..571240a 100644
--- a/common/cmd_eeprom.c
+++ b/cmd/eeprom.c
diff --git a/common/cmd_efi.c b/cmd/efi.c
index c76296e..c76296e 100644
--- a/common/cmd_efi.c
+++ b/cmd/efi.c
diff --git a/common/cmd_elf.c b/cmd/elf.c
index 5190cc6..5190cc6 100644
--- a/common/cmd_elf.c
+++ b/cmd/elf.c
diff --git a/common/cmd_ethsw.c b/cmd/ethsw.c
index 8e452e9..8e452e9 100644
--- a/common/cmd_ethsw.c
+++ b/cmd/ethsw.c
diff --git a/common/cmd_exit.c b/cmd/exit.c
index c789233..c789233 100644
--- a/common/cmd_exit.c
+++ b/cmd/exit.c
diff --git a/common/cmd_ext2.c b/cmd/ext2.c
index 6657ef5..6657ef5 100644
--- a/common/cmd_ext2.c
+++ b/cmd/ext2.c
diff --git a/common/cmd_ext4.c b/cmd/ext4.c
index 19423d1..19423d1 100644
--- a/common/cmd_ext4.c
+++ b/cmd/ext4.c
diff --git a/common/cmd_fastboot.c b/cmd/fastboot.c
index 488822a..488822a 100644
--- a/common/cmd_fastboot.c
+++ b/cmd/fastboot.c
diff --git a/common/cmd_fat.c b/cmd/fat.c
index aae993d..aae993d 100644
--- a/common/cmd_fat.c
+++ b/cmd/fat.c
diff --git a/common/cmd_fdc.c b/cmd/fdc.c
index 5766b56..5766b56 100644
--- a/common/cmd_fdc.c
+++ b/cmd/fdc.c
diff --git a/common/cmd_fdt.c b/cmd/fdt.c
index 4c18962..4c18962 100644
--- a/common/cmd_fdt.c
+++ b/cmd/fdt.c
diff --git a/common/cmd_fitupd.c b/cmd/fitupd.c
index 78b8747..78b8747 100644
--- a/common/cmd_fitupd.c
+++ b/cmd/fitupd.c
diff --git a/common/cmd_flash.c b/cmd/flash.c
index 85d18bb..85d18bb 100644
--- a/common/cmd_flash.c
+++ b/cmd/flash.c
diff --git a/common/cmd_fpga.c b/cmd/fpga.c
index 7f99aab..7f99aab 100644
--- a/common/cmd_fpga.c
+++ b/cmd/fpga.c
diff --git a/common/cmd_fpgad.c b/cmd/fpgad.c
index 5370c3e..5370c3e 100644
--- a/common/cmd_fpgad.c
+++ b/cmd/fpgad.c
diff --git a/common/cmd_fs.c b/cmd/fs.c
index 8f8f1b2..8f8f1b2 100644
--- a/common/cmd_fs.c
+++ b/cmd/fs.c
diff --git a/common/cmd_fs_uuid.c b/cmd/fs_uuid.c
index 613f3a4..613f3a4 100644
--- a/common/cmd_fs_uuid.c
+++ b/cmd/fs_uuid.c
diff --git a/common/cmd_fuse.c b/cmd/fuse.c
index 5998f9b..5998f9b 100644
--- a/common/cmd_fuse.c
+++ b/cmd/fuse.c
diff --git a/common/cmd_gettime.c b/cmd/gettime.c
index c48baad..c48baad 100644
--- a/common/cmd_gettime.c
+++ b/cmd/gettime.c
diff --git a/common/cmd_gpio.c b/cmd/gpio.c
index 2b78b16..2b78b16 100644
--- a/common/cmd_gpio.c
+++ b/cmd/gpio.c
diff --git a/common/cmd_gpt.c b/cmd/gpt.c
index d94d553..d94d553 100644
--- a/common/cmd_gpt.c
+++ b/cmd/gpt.c
diff --git a/common/cmd_hash.c b/cmd/hash.c
index 704d21e..704d21e 100644
--- a/common/cmd_hash.c
+++ b/cmd/hash.c
diff --git a/common/cmd_help.c b/cmd/help.c
index 6ff494d..6ff494d 100644
--- a/common/cmd_help.c
+++ b/cmd/help.c
diff --git a/common/cmd_host.c b/cmd/host.c
index ba1460e..ba1460e 100644
--- a/common/cmd_host.c
+++ b/cmd/host.c
diff --git a/common/cmd_i2c.c b/cmd/i2c.c
index b3bb644..b3bb644 100644
--- a/common/cmd_i2c.c
+++ b/cmd/i2c.c
diff --git a/common/cmd_ide.c b/cmd/ide.c
index f19a7ce..f19a7ce 100644
--- a/common/cmd_ide.c
+++ b/cmd/ide.c
diff --git a/common/cmd_immap.c b/cmd/immap.c
index 1414f9a..1414f9a 100644
--- a/common/cmd_immap.c
+++ b/cmd/immap.c
diff --git a/common/cmd_ini.c b/cmd/ini.c
index 727fd1c..727fd1c 100644
--- a/common/cmd_ini.c
+++ b/cmd/ini.c
diff --git a/common/cmd_io.c b/cmd/io.c
index c59148f..c59148f 100644
--- a/common/cmd_io.c
+++ b/cmd/io.c
diff --git a/common/cmd_iotrace.c b/cmd/iotrace.c
index f54276d..f54276d 100644
--- a/common/cmd_iotrace.c
+++ b/cmd/iotrace.c
diff --git a/common/cmd_irq.c b/cmd/irq.c
index 02da450..02da450 100644
--- a/common/cmd_irq.c
+++ b/cmd/irq.c
diff --git a/common/cmd_itest.c b/cmd/itest.c
index 91ae5c2..91ae5c2 100644
--- a/common/cmd_itest.c
+++ b/cmd/itest.c
diff --git a/common/cmd_jffs2.c b/cmd/jffs2.c
index bce0983..bce0983 100644
--- a/common/cmd_jffs2.c
+++ b/cmd/jffs2.c
diff --git a/common/cmd_ldrinfo.c b/cmd/ldrinfo.c
index 2aa56bd..2aa56bd 100644
--- a/common/cmd_ldrinfo.c
+++ b/cmd/ldrinfo.c
diff --git a/common/cmd_led.c b/cmd/led.c
index b0f1a61..b0f1a61 100644
--- a/common/cmd_led.c
+++ b/cmd/led.c
diff --git a/common/cmd_license.c b/cmd/license.c
index b07de72..b07de72 100644
--- a/common/cmd_license.c
+++ b/cmd/license.c
diff --git a/common/cmd_load.c b/cmd/load.c
index 0aa7937..0aa7937 100644
--- a/common/cmd_load.c
+++ b/cmd/load.c
diff --git a/common/cmd_log.c b/cmd/log.c
index 873ee40..873ee40 100644
--- a/common/cmd_log.c
+++ b/cmd/log.c
diff --git a/common/cmd_lzmadec.c b/cmd/lzmadec.c
index 1ad9ed6..1ad9ed6 100644
--- a/common/cmd_lzmadec.c
+++ b/cmd/lzmadec.c
diff --git a/common/cmd_mac.c b/cmd/mac.c
index 52d3ba0..52d3ba0 100644
--- a/common/cmd_mac.c
+++ b/cmd/mac.c
diff --git a/common/cmd_md5sum.c b/cmd/md5sum.c
index 23bb81e..23bb81e 100644
--- a/common/cmd_md5sum.c
+++ b/cmd/md5sum.c
diff --git a/common/cmd_mdio.c b/cmd/mdio.c
index fb13d05..fb13d05 100644
--- a/common/cmd_mdio.c
+++ b/cmd/mdio.c
diff --git a/common/cmd_mem.c b/cmd/mem.c
index efa3929..efa3929 100644
--- a/common/cmd_mem.c
+++ b/cmd/mem.c
diff --git a/common/cmd_mfsl.c b/cmd/mfsl.c
index e8e8e3c..e8e8e3c 100644
--- a/common/cmd_mfsl.c
+++ b/cmd/mfsl.c
diff --git a/common/cmd_mii.c b/cmd/mii.c
index 7ef7532..7ef7532 100644
--- a/common/cmd_mii.c
+++ b/cmd/mii.c
diff --git a/common/cmd_misc.c b/cmd/misc.c
index 39d8683..39d8683 100644
--- a/common/cmd_misc.c
+++ b/cmd/misc.c
diff --git a/common/cmd_mmc.c b/cmd/mmc.c
index 1c7156f..1c7156f 100644
--- a/common/cmd_mmc.c
+++ b/cmd/mmc.c
diff --git a/common/cmd_mmc_spi.c b/cmd/mmc_spi.c
index a2138b8..a2138b8 100644
--- a/common/cmd_mmc_spi.c
+++ b/cmd/mmc_spi.c
diff --git a/common/cmd_mp.c b/cmd/mp.c
index a80c642..a80c642 100644
--- a/common/cmd_mp.c
+++ b/cmd/mp.c
diff --git a/common/cmd_mtdparts.c b/cmd/mtdparts.c
index dab1958..dab1958 100644
--- a/common/cmd_mtdparts.c
+++ b/cmd/mtdparts.c
diff --git a/common/cmd_nand.c b/cmd/nand.c
index a6b67e2..a6b67e2 100644
--- a/common/cmd_nand.c
+++ b/cmd/nand.c
diff --git a/common/cmd_net.c b/cmd/net.c
index b2f3c7b..b2f3c7b 100644
--- a/common/cmd_net.c
+++ b/cmd/net.c
diff --git a/common/cmd_nvedit.c b/cmd/nvedit.c
index 5ae9d9d..5ae9d9d 100644
--- a/common/cmd_nvedit.c
+++ b/cmd/nvedit.c
diff --git a/common/cmd_onenand.c b/cmd/onenand.c
index feab01a..feab01a 100644
--- a/common/cmd_onenand.c
+++ b/cmd/onenand.c
diff --git a/common/cmd_otp.c b/cmd/otp.c
index 10c1475..10c1475 100644
--- a/common/cmd_otp.c
+++ b/cmd/otp.c
diff --git a/common/cmd_part.c b/cmd/part.c
index 5599509..5599509 100644
--- a/common/cmd_part.c
+++ b/cmd/part.c
diff --git a/common/cmd_pci.c b/cmd/pci.c
index 8094d33..8094d33 100644
--- a/common/cmd_pci.c
+++ b/cmd/pci.c
diff --git a/common/cmd_pcmcia.c b/cmd/pcmcia.c
index 682d18f..682d18f 100644
--- a/common/cmd_pcmcia.c
+++ b/cmd/pcmcia.c
diff --git a/common/cmd_pmic.c b/cmd/pmic.c
index 970767c..970767c 100644
--- a/common/cmd_pmic.c
+++ b/cmd/pmic.c
diff --git a/common/cmd_portio.c b/cmd/portio.c
index bf3a997..bf3a997 100644
--- a/common/cmd_portio.c
+++ b/cmd/portio.c
diff --git a/common/cmd_pxe.c b/cmd/pxe.c
index 080b376..080b376 100644
--- a/common/cmd_pxe.c
+++ b/cmd/pxe.c
diff --git a/common/cmd_read.c b/cmd/read.c
index 8710288..8710288 100644
--- a/common/cmd_read.c
+++ b/cmd/read.c
diff --git a/common/cmd_reginfo.c b/cmd/reginfo.c
index 5f19e79..5f19e79 100644
--- a/common/cmd_reginfo.c
+++ b/cmd/reginfo.c
diff --git a/common/cmd_regulator.c b/cmd/regulator.c
index bfea6e0..bfea6e0 100644
--- a/common/cmd_regulator.c
+++ b/cmd/regulator.c
diff --git a/common/cmd_reiser.c b/cmd/reiser.c
index 8871564..8871564 100644
--- a/common/cmd_reiser.c
+++ b/cmd/reiser.c
diff --git a/common/cmd_remoteproc.c b/cmd/remoteproc.c
index 794a406..794a406 100644
--- a/common/cmd_remoteproc.c
+++ b/cmd/remoteproc.c
diff --git a/common/cmd_sata.c b/cmd/sata.c
index 76bacea..76bacea 100644
--- a/common/cmd_sata.c
+++ b/cmd/sata.c
diff --git a/common/cmd_scsi.c b/cmd/scsi.c
index bc7d1b6..bc7d1b6 100644
--- a/common/cmd_scsi.c
+++ b/cmd/scsi.c
diff --git a/common/cmd_setexpr.c b/cmd/setexpr.c
index e7194fc..e7194fc 100644
--- a/common/cmd_setexpr.c
+++ b/cmd/setexpr.c
diff --git a/common/cmd_sf.c b/cmd/sf.c
index 42862d9..42862d9 100644
--- a/common/cmd_sf.c
+++ b/cmd/sf.c
diff --git a/common/cmd_sha1sum.c b/cmd/sha1sum.c
index 783ea2e..783ea2e 100644
--- a/common/cmd_sha1sum.c
+++ b/cmd/sha1sum.c
diff --git a/common/cmd_softswitch.c b/cmd/softswitch.c
index f75d926..f75d926 100644
--- a/common/cmd_softswitch.c
+++ b/cmd/softswitch.c
diff --git a/common/cmd_sound.c b/cmd/sound.c
index f5dd8bc..f5dd8bc 100644
--- a/common/cmd_sound.c
+++ b/cmd/sound.c
diff --git a/common/cmd_source.c b/cmd/source.c
index db7ab7e..db7ab7e 100644
--- a/common/cmd_source.c
+++ b/cmd/source.c
diff --git a/common/cmd_spi.c b/cmd/spi.c
index 64c3ffc..64c3ffc 100644
--- a/common/cmd_spi.c
+++ b/cmd/spi.c
diff --git a/common/cmd_spibootldr.c b/cmd/spibootldr.c
index ca76dde..ca76dde 100644
--- a/common/cmd_spibootldr.c
+++ b/cmd/spibootldr.c
diff --git a/common/cmd_spl.c b/cmd/spl.c
index 057764a..057764a 100644
--- a/common/cmd_spl.c
+++ b/cmd/spl.c
diff --git a/common/cmd_strings.c b/cmd/strings.c
index 41b1665..41b1665 100644
--- a/common/cmd_strings.c
+++ b/cmd/strings.c
diff --git a/common/cmd_terminal.c b/cmd/terminal.c
index 4b9c0b3..4b9c0b3 100644
--- a/common/cmd_terminal.c
+++ b/cmd/terminal.c
diff --git a/common/cmd_test.c b/cmd/test.c
index 7285f75..7285f75 100644
--- a/common/cmd_test.c
+++ b/cmd/test.c
diff --git a/common/cmd_thordown.c b/cmd/thordown.c
index 436b7f5..436b7f5 100644
--- a/common/cmd_thordown.c
+++ b/cmd/thordown.c
diff --git a/common/cmd_time.c b/cmd/time.c
index de57e3b..de57e3b 100644
--- a/common/cmd_time.c
+++ b/cmd/time.c
diff --git a/common/cmd_tpm.c b/cmd/tpm.c
index add6bfb..add6bfb 100644
--- a/common/cmd_tpm.c
+++ b/cmd/tpm.c
diff --git a/common/cmd_tpm_test.c b/cmd/tpm_test.c
index 65332d1..65332d1 100644
--- a/common/cmd_tpm_test.c
+++ b/cmd/tpm_test.c
diff --git a/common/cmd_trace.c b/cmd/trace.c
index 1e62a1a..1e62a1a 100644
--- a/common/cmd_trace.c
+++ b/cmd/trace.c
diff --git a/common/cmd_tsi148.c b/cmd/tsi148.c
index ea96d0f..ea96d0f 100644
--- a/common/cmd_tsi148.c
+++ b/cmd/tsi148.c
diff --git a/common/cmd_ubi.c b/cmd/ubi.c
index 753a4db..753a4db 100644
--- a/common/cmd_ubi.c
+++ b/cmd/ubi.c
diff --git a/common/cmd_ubifs.c b/cmd/ubifs.c
index 5e9d357..5e9d357 100644
--- a/common/cmd_ubifs.c
+++ b/cmd/ubifs.c
diff --git a/common/cmd_universe.c b/cmd/universe.c
index c931036..c931036 100644
--- a/common/cmd_universe.c
+++ b/cmd/universe.c
diff --git a/common/cmd_unzip.c b/cmd/unzip.c
index 0686be6..0686be6 100644
--- a/common/cmd_unzip.c
+++ b/cmd/unzip.c
diff --git a/common/cmd_usb.c b/cmd/usb.c
index c7b642c..c7b642c 100644
--- a/common/cmd_usb.c
+++ b/cmd/usb.c
diff --git a/common/cmd_usb_mass_storage.c b/cmd/usb_mass_storage.c
index 0415591..0415591 100644
--- a/common/cmd_usb_mass_storage.c
+++ b/cmd/usb_mass_storage.c
diff --git a/common/cmd_version.c b/cmd/version.c
index 1be0667..1be0667 100644
--- a/common/cmd_version.c
+++ b/cmd/version.c
diff --git a/common/cmd_ximg.c b/cmd/ximg.c
index d033c15..d033c15 100644
--- a/common/cmd_ximg.c
+++ b/cmd/ximg.c
diff --git a/common/cmd_yaffs2.c b/cmd/yaffs2.c
index 9244606..9244606 100644
--- a/common/cmd_yaffs2.c
+++ b/cmd/yaffs2.c
diff --git a/common/cmd_zfs.c b/cmd/zfs.c
index 0aed29e..0aed29e 100644
--- a/common/cmd_zfs.c
+++ b/cmd/zfs.c
diff --git a/common/cmd_zip.c b/cmd/zip.c
index 7fcd9d5..7fcd9d5 100644
--- a/common/cmd_zip.c
+++ b/cmd/zip.c
diff --git a/common/Kconfig b/common/Kconfig
index 9d446bf..067545d 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -1,522 +1,3 @@
-menu "Command line interface"
-
-config HUSH_PARSER
-	bool "Use hush shell"
-	select SYS_HUSH_PARSER
-	help
-	  This option enables the "hush" shell (from Busybox) as command line
-	  interpreter, thus enabling powerful command line syntax like
-	  if...then...else...fi conditionals or `&&' and '||'
-	  constructs ("shell scripts").
-
-	  If disabled, you get the old, much simpler behaviour with a somewhat
-	  smaller memory footprint.
-
-config SYS_HUSH_PARSER
-	bool
-	help
-	  Backward compatibility.
-
-config SYS_PROMPT
-	string "Shell prompt"
-	default "=> "
-	help
-	  This string is displayed in the command line to the left of the
-	  cursor.
-
-menu "Autoboot options"
-
-config AUTOBOOT_KEYED
-	bool "Stop autobooting via specific input key / string"
-	default n
-	help
-	  This option enables stopping (aborting) of the automatic
-	  boot feature only by issuing a specific input key or
-	  string. If not enabled, any input key will abort the
-	  U-Boot automatic booting process and bring the device
-	  to the U-Boot prompt for user input.
-
-config AUTOBOOT_PROMPT
-	string "Autoboot stop prompt"
-	depends on AUTOBOOT_KEYED
-	default "Autoboot in %d seconds\\n"
-	help
-	  This string is displayed before the boot delay selected by
-	  CONFIG_BOOTDELAY starts. If it is not defined	there is no
-	  output indicating that autoboot is in progress.
-
-	  Note that this define is used as the (only) argument to a
-	  printf() call, so it may contain '%' format specifications,
-	  provided that it also includes, sepearated by commas exactly
-	  like in a printf statement, the required arguments. It is
-	  the responsibility of the user to select only such arguments
-	  that are valid in the given context.
-
-config AUTOBOOT_ENCRYPTION
-	bool "Enable encryption in autoboot stopping"
-	depends on AUTOBOOT_KEYED
-	default n
-
-config AUTOBOOT_DELAY_STR
-	string "Delay autobooting via specific input key / string"
-	depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
-	help
-	  This option delays the automatic boot feature by issuing
-	  a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
-	  or the environment variable "bootdelaykey" is specified
-	  and this string is received from console input before
-	  autoboot starts booting, U-Boot gives a command prompt. The
-	  U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
-	  used, otherwise it never times out.
-
-config AUTOBOOT_STOP_STR
-	string "Stop autobooting via specific input key / string"
-	depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
-	help
-	  This option enables stopping (aborting) of the automatic
-	  boot feature only by issuing a specific input key or
-	  string. If CONFIG_AUTOBOOT_STOP_STR or the environment
-	  variable "bootstopkey" is specified and this string is
-	  received from console input before autoboot starts booting,
-	  U-Boot gives a command prompt. The U-Boot prompt never
-	  times out, even if CONFIG_BOOT_RETRY_TIME is used.
-
-config AUTOBOOT_KEYED_CTRLC
-	bool "Enable Ctrl-C autoboot interruption"
-	depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
-	default n
-	help
-	  This option allows for the boot sequence to be interrupted
-	  by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
-	  Setting this variable	provides an escape sequence from the
-	  limited "password" strings.
-
-config AUTOBOOT_STOP_STR_SHA256
-	string "Stop autobooting via SHA256 encrypted password"
-	depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
-	help
-	  This option adds the feature to only stop the autobooting,
-	  and therefore boot into the U-Boot prompt, when the input
-	  string / password matches a values that is encypted via
-	  a SHA256 hash and saved in the environment.
-
-endmenu
-
-comment "Commands"
-
-menu "Info commands"
-
-config CMD_BDI
-	bool "bdinfo"
-	default y
-	help
-	  Print board info
-
-config CMD_CONSOLE
-	bool "coninfo"
-	default y
-	help
-	  Print console devices and information.
-
-config CMD_CPU
-	bool "cpu"
-	help
-	  Print information about available CPUs. This normally shows the
-	  number of CPUs, type (e.g. manufacturer, architecture, product or
-	  internal name) and clock frequency. Other information may be
-	  available depending on the CPU driver.
-
-config CMD_LICENSE
-	bool "license"
-	help
-	  Print GPL license text
-
-endmenu
-
-menu "Boot commands"
-
-config CMD_BOOTD
-	bool "bootd"
-	default y
-	help
-	  Run the command stored in the environment "bootcmd", i.e.
-	  "bootd" does the same thing as "run bootcmd".
-
-config CMD_BOOTM
-	bool "bootm"
-	default y
-	help
-	  Boot an application image from the memory.
-
-config CMD_ELF
-	bool "bootelf, bootvx"
-	default y
-	help
-	  Boot an ELF/vxWorks image from the memory.
-
-config CMD_GO
-	bool "go"
-	default y
-	help
-	  Start an application at a given address.
-
-config CMD_RUN
-	bool "run"
-	default y
-	help
-	  Run the command in the given environment variable.
-
-config CMD_IMI
-	bool "iminfo"
-	default y
-	help
-	  Print header information for application image.
-
-config CMD_IMLS
-	bool "imls"
-	default y
-	help
-	  List all images found in flash
-
-config CMD_XIMG
-	bool "imxtract"
-	default y
-	help
-	  Extract a part of a multi-image.
-
-config CMD_POWEROFF
-	bool
-
-endmenu
-
-menu "Environment commands"
-
-config CMD_EXPORTENV
-	bool "env export"
-	default y
-	help
-	  Export environments.
-
-config CMD_IMPORTENV
-	bool "env import"
-	default y
-	help
-	  Import environments.
-
-config CMD_EDITENV
-	bool "editenv"
-	default y
-	help
-	  Edit environment variable.
-
-config CMD_SAVEENV
-	bool "saveenv"
-	default y
-	help
-	  Save all environment variables into the compiled-in persistent
-	  storage.
-
-config CMD_ENV_EXISTS
-	bool "env exists"
-	default y
-	help
-	  Check if a variable is defined in the environment for use in
-	  shell scripting.
-
-endmenu
-
-menu "Memory commands"
-
-config CMD_MEMORY
-	bool "md, mm, nm, mw, cp, cmp, base, loop"
-	default y
-	help
-	  Memeory commands.
-	    md - memory display
-	    mm - memory modify (auto-incrementing address)
-	    nm - memory modify (constant address)
-	    mw - memory write (fill)
-	    cp - memory copy
-	    cmp - memory compare
-	    base - print or set address offset
-	    loop - initinite loop on address range
-
-config CMD_CRC32
-	bool "crc32"
-	default y
-	help
-	  Compute CRC32.
-
-config LOOPW
-	bool "loopw"
-	help
-	  Infinite write loop on address range
-
-config CMD_MEMTEST
-	bool "memtest"
-	help
-	  Simple RAM read/write test.
-
-config CMD_MX_CYCLIC
-	bool "mdc, mwc"
-	help
-	  mdc - memory display cyclic
-	  mwc - memory write cyclic
-
-config CMD_MEMINFO
-	bool "meminfo"
-	help
-	  Display memory information.
-
-endmenu
-
-menu "Device access commands"
-
-config CMD_DM
-	bool "dm - Access to driver model information"
-	depends on DM
-	default y
-	help
-	  Provides access to driver model data structures and information,
-	  such as a list of devices, list of uclasses and the state of each
-	  device (e.g. activated). This is not required for operation, but
-	  can be useful to see the state of driver model for debugging or
-	  interest.
-
-config CMD_DEMO
-	bool "demo - Demonstration commands for driver model"
-	depends on DM
-	help
-	  Provides a 'demo' command which can be used to play around with
-	  driver model. To use this properly you will need to enable one or
-	  both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
-	  Otherwise you will always get an empty list of devices. The demo
-	  devices are defined in the sandbox device tree, so the easiest
-	  option is to use sandbox and pass the -d point to sandbox's
-	  u-boot.dtb file.
-
-config CMD_LOADB
-	bool "loadb"
-	default y
-	help
-	  Load a binary file over serial line.
-
-config CMD_LOADS
-	bool "loads"
-	default y
-	help
-	  Load an S-Record file over serial line
-
-config CMD_FLASH
-	bool "flinfo, erase, protect"
-	default y
-	help
-	  NOR flash support.
-	    flinfo - print FLASH memory information
-	    erase - FLASH memory
-	    protect - enable or disable FLASH write protection
-
-config CMD_ARMFLASH
-	depends on FLASH_CFI_DRIVER
-	bool "armflash"
-	help
-	  ARM Ltd reference designs flash partition access
-
-config CMD_NAND
-	bool "nand"
-	help
-	  NAND support.
-
-config CMD_SF
-	bool "sf"
-	help
-	  SPI Flash support
-
-config CMD_SPI
-	bool "sspi"
-	help
-	  SPI utility command.
-
-config CMD_I2C
-	bool "i2c"
-	help
-	  I2C support.
-
-config CMD_USB
-	bool "usb"
-	help
-	  USB support.
-
-config CMD_FPGA
-	bool "fpga"
-	default y
-	help
-	  FPGA support.
-
-config CMD_REMOTEPROC
-	bool "remoteproc"
-	depends on REMOTEPROC
-	help
-	  Support for Remote Processor control
-
-config CMD_GPIO
-	bool "gpio"
-	help
-	  GPIO support.
-
-endmenu
-
-
-menu "Shell scripting commands"
-
-config CMD_ECHO
-	bool "echo"
-	default y
-	help
-	  Echo args to console
-
-config CMD_ITEST
-	bool "itest"
-	default y
-	help
-	  Return true/false on integer compare.
-
-config CMD_SOURCE
-	bool "source"
-	default y
-	help
-	  Run script from memory
-
-config CMD_SETEXPR
-	bool "setexpr"
-	default y
-	help
-	  Evaluate boolean and math expressions and store the result in an env
-	    variable.
-	  Also supports loading the value at a memory location into a variable.
-	  If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
-
-endmenu
-
-menu "Network commands"
-
-config CMD_NET
-	bool "bootp, tftpboot"
-        select NET
-	default y
-	help
-	  Network commands.
-	  bootp - boot image via network using BOOTP/TFTP protocol
-	  tftpboot - boot image via network using TFTP protocol
-
-config CMD_TFTPPUT
-	bool "tftp put"
-	help
-	  TFTP put command, for uploading files to a server
-
-config CMD_TFTPSRV
-	bool "tftpsrv"
-	help
-	  Act as a TFTP server and boot the first received file
-
-config CMD_RARP
-	bool "rarpboot"
-	help
-	  Boot image via network using RARP/TFTP protocol
-
-config CMD_DHCP
-	bool "dhcp"
-	help
-	  Boot image via network using DHCP/TFTP protocol
-
-config CMD_NFS
-	bool "nfs"
-	default y
-	help
-	  Boot image via network using NFS protocol.
-
-config CMD_PING
-	bool "ping"
-	help
-	  Send ICMP ECHO_REQUEST to network host
-
-config CMD_CDP
-	bool "cdp"
-	help
-	  Perform CDP network configuration
-
-config CMD_SNTP
-	bool "sntp"
-	help
-	  Synchronize RTC via network
-
-config CMD_DNS
-	bool "dns"
-	help
-	  Lookup the IP of a hostname
-
-config CMD_LINK_LOCAL
-	bool "linklocal"
-	help
-	  Acquire a network IP address using the link-local protocol
-
-endmenu
-
-menu "Misc commands"
-
-config CMD_AMBAPP
-	bool "ambapp"
-	depends on LEON3
-	default y
-	help
-	  Lists AMBA Plug-n-Play information.
-
-config SYS_AMBAPP_PRINT_ON_STARTUP
-	bool "Show AMBA PnP info on startup"
-	depends on CMD_AMBAPP
-	default n
-	help
-	  Show AMBA Plug-n-Play information on startup.
-
-config CMD_TIME
-	bool "time"
-	help
-	  Run commands and summarize execution time.
-
-# TODO: rename to CMD_SLEEP
-config CMD_MISC
-	bool "sleep"
-	default y
-	help
-	  Delay execution for some time
-
-config CMD_TIMER
-	bool "timer"
-	help
-	  Access the system timer.
-
-config CMD_SETGETDCR
-	bool "getdcr, setdcr, getidcr, setidcr"
-	depends on 4xx
-	default y
-	help
-	  getdcr - Get an AMCC PPC 4xx DCR's value
-	  setdcr - Set an AMCC PPC 4xx DCR's value
-	  getidcr - Get a register value via indirect DCR addressing
-	  setidcr - Set a register value via indirect DCR addressing
-
-config CMD_SOUND
-	bool "sound"
-	depends on SOUND
-	help
-	  This provides basic access to the U-Boot's sound support. The main
-	  feature is to play a beep.
-
-	     sound init   - set up sound system
-	     sound play   - play a sound
-
-endmenu
-
 menu "Boot timing"
 
 config BOOTSTAGE
@@ -565,13 +46,6 @@ config BOOTSTAGE_USER_COUNT
 	  a new ID will be allocated from this stash. If you exceed
 	  the limit, recording will stop.
 
-config CMD_BOOTSTAGE
-	bool "Enable the 'bootstage' command"
-	depends on BOOTSTAGE
-	help
-	  Add a 'bootstage' command which supports printing a report
-	  and un/stashing of bootstage data.
-
 config BOOTSTAGE_FDT
 	bool "Store boot timing information in the OS device tree"
 	depends on BOOTSTAGE
@@ -623,66 +97,6 @@ config BOOTSTAGE_STASH_SIZE
 
 endmenu
 
-menu "Power commands"
-config CMD_PMIC
-	bool "Enable Driver Model PMIC command"
-	depends on DM_PMIC
-	help
-	  This is the pmic command, based on a driver model pmic's API.
-	  Command features are unchanged:
-	  - list               - list pmic devices
-	  - pmic dev <id>      - show or [set] operating pmic device (NEW)
-	  - pmic dump          - dump registers
-	  - pmic read address  - read byte of register at address
-	  - pmic write address - write byte to register at address
-	  The only one change for this command is 'dev' subcommand.
-
-config CMD_REGULATOR
-	bool "Enable Driver Model REGULATOR command"
-	depends on DM_REGULATOR
-	help
-	  This command is based on driver model regulator's API.
-	  User interface features:
-	  - list               - list regulator devices
-	  - regulator dev <id> - show or [set] operating regulator device
-	  - regulator info     - print constraints info
-	  - regulator status   - print operating status
-	  - regulator value <val] <-f> - print/[set] voltage value [uV]
-	  - regulator current <val>    - print/[set] current value [uA]
-	  - regulator mode <id>        - print/[set] operating mode id
-	  - regulator enable           - enable the regulator output
-	  - regulator disable          - disable the regulator output
-
-	  The '-f' (force) option can be used for set the value which exceeds
-	  the limits, which are found in device-tree and are kept in regulator's
-	  uclass platdata structure.
-
-endmenu
-
-menu "Security commands"
-config CMD_TPM
-	bool "Enable the 'tpm' command"
-	depends on TPM
-	help
-	  This provides a means to talk to a TPM from the command line. A wide
-	  range of commands if provided - see 'tpm help' for details. The
-	  command requires a suitable TPM on your board and the correct driver
-	  must be enabled.
-
-config CMD_TPM_TEST
-	bool "Enable the 'tpm test' command"
-	depends on CMD_TPM
-	help
-	  This provides a a series of tests to confirm that the TPM is working
-	  correctly. The tests cover initialisation, non-volatile RAM, extend,
-	  global lock and checking that timing is within expectations. The
-	  tests pass correctly on Infineon TPMs but may need to be adjusted
-	  for other devices.
-
-endmenu
-
-endmenu
-
 config CONSOLE_RECORD
 	bool "Console recording"
 	help
diff --git a/common/Makefile b/common/Makefile
index 2492275..5998411 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -31,11 +31,7 @@ obj-$(CONFIG_SYS_GENERIC_BOARD) += board_r.o
 obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
 obj-$(CONFIG_DISPLAY_BOARDINFO_LATE) += board_info.o
 
-# core command
-obj-y += cmd_boot.o
-obj-$(CONFIG_CMD_BOOTM) += cmd_bootm.o bootm.o bootm_os.o
-obj-y += cmd_help.o
-obj-y += cmd_version.o
+obj-$(CONFIG_CMD_BOOTM) += bootm.o bootm_os.o
 
 # environment
 obj-y += env_attr.o
@@ -58,143 +54,17 @@ obj-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o
 obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o
 obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
 
-# command
-obj-$(CONFIG_CMD_AES) += cmd_aes.o
-obj-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o
-obj-$(CONFIG_CMD_ARMFLASH) += cmd_armflash.o
-obj-$(CONFIG_SOURCE) += cmd_source.o
-obj-$(CONFIG_CMD_SOURCE) += cmd_source.o
-obj-$(CONFIG_CMD_BDI) += cmd_bdinfo.o
-obj-$(CONFIG_CMD_BEDBUG) += bedbug.o cmd_bedbug.o
-obj-$(CONFIG_CMD_BMP) += cmd_bmp.o
-obj-$(CONFIG_CMD_BOOTMENU) += cmd_bootmenu.o
-obj-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o
-obj-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o
-obj-$(CONFIG_CMD_CACHE) += cmd_cache.o
-obj-$(CONFIG_CMD_CBFS) += cmd_cbfs.o
-obj-$(CONFIG_CMD_CLK) += cmd_clk.o
-obj-$(CONFIG_CMD_CONSOLE) += cmd_console.o
-obj-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o
-obj-$(CONFIG_CMD_CPU) += cmd_cpu.o
-obj-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o
-obj-$(CONFIG_CMD_DATE) += cmd_date.o
-obj-$(CONFIG_CMD_DEMO) += cmd_demo.o
-obj-$(CONFIG_CMD_SOUND) += cmd_sound.o
-ifdef CONFIG_4xx
-obj-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o
-endif
-ifdef CONFIG_POST
-obj-$(CONFIG_CMD_DIAG) += cmd_diag.o
-endif
-obj-$(CONFIG_CMD_DISPLAY) += cmd_display.o
-obj-$(CONFIG_CMD_DTT) += cmd_dtt.o
-obj-$(CONFIG_CMD_ECHO) += cmd_echo.o
-obj-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o
-obj-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o
-obj-$(CONFIG_EFI_STUB) += cmd_efi.o
-obj-$(CONFIG_CMD_ELF) += cmd_elf.o
-obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o
-obj-$(CONFIG_CMD_EXT4) += cmd_ext4.o
-obj-$(CONFIG_CMD_EXT2) += cmd_ext2.o
-obj-$(CONFIG_CMD_FAT) += cmd_fat.o
-obj-$(CONFIG_CMD_FDC) += cmd_fdc.o
-obj-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o
-obj-$(CONFIG_CMD_FITUPD) += cmd_fitupd.o
-obj-$(CONFIG_CMD_FLASH) += cmd_flash.o
-ifdef CONFIG_FPGA
-obj-$(CONFIG_CMD_FPGA) += cmd_fpga.o
-endif
-obj-$(CONFIG_CMD_FPGAD) += cmd_fpgad.o
-obj-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o
-obj-$(CONFIG_CMD_FUSE) += cmd_fuse.o
-obj-$(CONFIG_CMD_GETTIME) += cmd_gettime.o
-obj-$(CONFIG_CMD_GPIO) += cmd_gpio.o
-obj-$(CONFIG_CMD_I2C) += cmd_i2c.o
-obj-$(CONFIG_CMD_IOTRACE) += cmd_iotrace.o
-obj-$(CONFIG_CMD_HASH) += cmd_hash.o
-obj-$(CONFIG_CMD_IDE) += cmd_ide.o
-obj-$(CONFIG_CMD_IMMAP) += cmd_immap.o
-obj-$(CONFIG_CMD_INI) += cmd_ini.o
-obj-$(CONFIG_CMD_IRQ) += cmd_irq.o
-obj-$(CONFIG_CMD_ITEST) += cmd_itest.o
-obj-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
-obj-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o
-obj-$(CONFIG_CMD_LDRINFO) += cmd_ldrinfo.o
-obj-$(CONFIG_CMD_LED) += cmd_led.o
-obj-$(CONFIG_CMD_LICENSE) += cmd_license.o
-obj-y += cmd_load.o
-obj-$(CONFIG_LOGBUFFER) += cmd_log.o
-obj-$(CONFIG_ID_EEPROM) += cmd_mac.o
-obj-$(CONFIG_CMD_MD5SUM) += cmd_md5sum.o
-obj-$(CONFIG_CMD_MEMORY) += cmd_mem.o
-obj-$(CONFIG_CMD_IO) += cmd_io.o
-obj-$(CONFIG_CMD_MFSL) += cmd_mfsl.o
+obj-$(CONFIG_CMD_BEDBUG) += bedbug.o
+obj-$(CONFIG_OF_LIBFDT) += fdt_support.o
+
 obj-$(CONFIG_MII) += miiphyutil.o
 obj-$(CONFIG_CMD_MII) += miiphyutil.o
 obj-$(CONFIG_PHYLIB) += miiphyutil.o
-obj-$(CONFIG_CMD_MII) += cmd_mii.o
-ifdef CONFIG_PHYLIB
-obj-$(CONFIG_CMD_MII) += cmd_mdio.o
-endif
-obj-$(CONFIG_CMD_MISC) += cmd_misc.o
-obj-$(CONFIG_CMD_MMC) += cmd_mmc.o
-obj-$(CONFIG_CMD_MMC_SPI) += cmd_mmc_spi.o
-obj-$(CONFIG_MP) += cmd_mp.o
-obj-$(CONFIG_CMD_MTDPARTS) += cmd_mtdparts.o
-obj-$(CONFIG_CMD_NAND) += cmd_nand.o
-obj-$(CONFIG_CMD_NET) += cmd_net.o
-obj-$(CONFIG_CMD_ONENAND) += cmd_onenand.o
-obj-$(CONFIG_CMD_OTP) += cmd_otp.o
-obj-$(CONFIG_CMD_PART) += cmd_part.o
-ifdef CONFIG_PCI
-obj-$(CONFIG_CMD_PCI) += cmd_pci.o
-endif
-obj-y += cmd_pcmcia.o
-obj-$(CONFIG_CMD_PORTIO) += cmd_portio.o
-obj-$(CONFIG_CMD_PXE) += cmd_pxe.o
-obj-$(CONFIG_CMD_READ) += cmd_read.o
-obj-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o
-obj-$(CONFIG_CMD_REISER) += cmd_reiser.o
-obj-$(CONFIG_CMD_REMOTEPROC) += cmd_remoteproc.o
-obj-$(CONFIG_SANDBOX) += cmd_host.o
-obj-$(CONFIG_CMD_SATA) += cmd_sata.o
-obj-$(CONFIG_CMD_SF) += cmd_sf.o
-obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o
-obj-$(CONFIG_CMD_SHA1SUM) += cmd_sha1sum.o
-obj-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o
-obj-$(CONFIG_CMD_SOFTSWITCH) += cmd_softswitch.o
-obj-$(CONFIG_CMD_SPI) += cmd_spi.o
-obj-$(CONFIG_CMD_SPIBOOTLDR) += cmd_spibootldr.o
-obj-$(CONFIG_CMD_STRINGS) += cmd_strings.o
-obj-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o
-obj-$(CONFIG_CMD_TIME) += cmd_time.o
-obj-$(CONFIG_CMD_TRACE) += cmd_trace.o
-obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_test.o
-obj-$(CONFIG_CMD_TPM) += cmd_tpm.o
-obj-$(CONFIG_CMD_TPM_TEST) += cmd_tpm_test.o
-obj-$(CONFIG_CMD_TSI148) += cmd_tsi148.o
-obj-$(CONFIG_CMD_UBI) += cmd_ubi.o
-obj-$(CONFIG_CMD_UBIFS) += cmd_ubifs.o
-obj-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
-obj-$(CONFIG_CMD_UNZIP) += cmd_unzip.o
-ifdef CONFIG_LZMA
-obj-$(CONFIG_CMD_LZMADEC) += cmd_lzmadec.o
-endif
+
 ifdef CONFIG_CMD_USB
-obj-y += cmd_usb.o
 obj-y += usb.o usb_hub.o
 obj-$(CONFIG_USB_STORAGE) += usb_storage.o
 endif
-obj-$(CONFIG_CMD_FASTBOOT) += cmd_fastboot.o
-obj-$(CONFIG_CMD_FS_UUID) += cmd_fs_uuid.o
-
-obj-$(CONFIG_CMD_USB_MASS_STORAGE) += cmd_usb_mass_storage.o
-obj-$(CONFIG_CMD_THOR_DOWNLOAD) += cmd_thordown.o
-obj-$(CONFIG_CMD_XIMG) += cmd_ximg.o
-obj-$(CONFIG_YAFFS2) += cmd_yaffs2.o
-obj-$(CONFIG_CMD_SPL) += cmd_spl.o
-obj-$(CONFIG_CMD_ZIP) += cmd_zip.o
-obj-$(CONFIG_CMD_ZFS) += cmd_zfs.o
 
 # others
 obj-$(CONFIG_BOOTSTAGE) += bootstage.o
@@ -216,14 +86,8 @@ obj-$(CONFIG_MODEM_SUPPORT) += modem.o
 obj-$(CONFIG_UPDATE_TFTP) += update.o
 obj-$(CONFIG_DFU_TFTP) += update.o
 obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
-obj-$(CONFIG_CMD_DFU) += cmd_dfu.o
-obj-$(CONFIG_CMD_GPT) += cmd_gpt.o
-obj-$(CONFIG_CMD_ETHSW) += cmd_ethsw.o
 
-# Power
-obj-$(CONFIG_CMD_PMIC) += cmd_pmic.o
-obj-$(CONFIG_CMD_REGULATOR) += cmd_regulator.o
-endif
+endif # !CONFIG_SPL_BUILD
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
@@ -234,9 +98,6 @@ ifdef CONFIG_SPL_USB_HOST_SUPPORT
 obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
 obj-$(CONFIG_USB_STORAGE) += usb_storage.o
 endif
-ifdef CONFIG_SPL_SATA_SUPPORT
-obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o
-endif
 # environment
 ifdef CONFIG_SPL_ENV_SUPPORT
 obj-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o
@@ -250,8 +111,6 @@ obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
 obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
 endif
 endif
-# core command
-obj-y += cmd_nvedit.o
 #environment
 obj-y += env_common.o
 #others
@@ -289,8 +148,6 @@ obj-y += fb_nand.o
 endif
 endif
 
-obj-$(CONFIG_CMD_BLOB) += cmd_blob.o
-
 # We always have this since drivers/ddr/fs/interactive.c needs it
 obj-y += cli_simple.o
 
@@ -299,6 +156,5 @@ obj-y += cli_readline.o
 obj-y += command.o
 obj-y += s_record.o
 obj-y += xyzModem.o
-obj-y += cmd_disk.o
 
 CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null)
diff --git a/common/bootm.c b/common/bootm.c
index 58936ca..99d574d 100644
--- a/common/bootm.c
+++ b/common/bootm.c
@@ -435,7 +435,7 @@ static int bootm_load_os(bootm_headers_t *images, unsigned long *load_end,
 		bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
 		return err;
 	}
-	flush_cache(load, (*load_end - load) * sizeof(ulong));
+	flush_cache(load, *load_end - load);
 
 	debug("   kernel loaded at 0x%08lx, end = 0x%08lx\n", load, *load_end);
 	bootstage_mark(BOOTSTAGE_ID_KERNEL_LOADED);
diff --git a/common/console.c b/common/console.c
index bc37b6d..b3f5fdc 100644
--- a/common/console.c
+++ b/common/console.c
@@ -227,11 +227,6 @@ static void console_puts(int file, const char *s)
 	}
 }
 
-static inline void console_printdevs(int file)
-{
-	iomux_printdevs(file);
-}
-
 static inline void console_doenv(int file, struct stdio_dev *dev)
 {
 	iomux_doenv(file, dev->name);
@@ -265,11 +260,6 @@ static inline void console_puts(int file, const char *s)
 	stdio_devices[file]->puts(stdio_devices[file], s);
 }
 
-static inline void console_printdevs(int file)
-{
-	printf("%s\n", stdio_devices[file]->name);
-}
-
 static inline void console_doenv(int file, struct stdio_dev *dev)
 {
 	console_setfile(file, dev);
@@ -653,44 +643,6 @@ void clear_ctrlc(void)
 	ctrlc_was_pressed = 0;
 }
 
-#ifdef CONFIG_MODEM_SUPPORT_DEBUG
-char	screen[1024];
-char *cursor = screen;
-int once = 0;
-inline void dbg(const char *fmt, ...)
-{
-	va_list	args;
-	uint	i;
-	char	printbuffer[CONFIG_SYS_PBSIZE];
-
-	if (!once) {
-		memset(screen, 0, sizeof(screen));
-		once++;
-	}
-
-	va_start(args, fmt);
-
-	/* For this to work, printbuffer must be larger than
-	 * anything we ever want to print.
-	 */
-	i = vsnprintf(printbuffer, sizeof(printbuffer), fmt, args);
-	va_end(args);
-
-	if ((screen + sizeof(screen) - 1 - cursor)
-	    < strlen(printbuffer) + 1) {
-		memset(screen, 0, sizeof(screen));
-		cursor = screen;
-	}
-	sprintf(cursor, printbuffer);
-	cursor += strlen(printbuffer);
-
-}
-#else
-static inline void dbg(const char *fmt, ...)
-{
-}
-#endif
-
 /** U-Boot INIT FUNCTIONS *************************************************/
 
 struct stdio_dev *search_device(int flags, const char *name)
diff --git a/common/env_mmc.c b/common/env_mmc.c
index 15aa43d..bdb452e 100644
--- a/common/env_mmc.c
+++ b/common/env_mmc.c
@@ -54,6 +54,11 @@ __weak int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr)
 	return 0;
 }
 
+__weak int mmc_get_env_dev(void)
+{
+	return CONFIG_SYS_MMC_ENV_DEV;
+}
+
 int env_init(void)
 {
 	/* use default */
@@ -74,7 +79,7 @@ static unsigned char env_mmc_orig_hwpart;
 static int mmc_set_env_part(struct mmc *mmc)
 {
 	uint part = mmc_get_env_part(mmc);
-	int dev = CONFIG_SYS_MMC_ENV_DEV;
+	int dev = mmc_get_env_dev();
 	int ret = 0;
 
 #ifdef CONFIG_SPL_BUILD
@@ -109,7 +114,7 @@ static const char *init_mmc_for_env(struct mmc *mmc)
 static void fini_mmc_for_env(struct mmc *mmc)
 {
 #ifdef CONFIG_SYS_MMC_ENV_PART
-	int dev = CONFIG_SYS_MMC_ENV_DEV;
+	int dev = mmc_get_env_dev();
 
 #ifdef CONFIG_SPL_BUILD
 	dev = 0;
@@ -140,7 +145,8 @@ static unsigned char env_flags;
 int saveenv(void)
 {
 	ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1);
-	struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
+	int dev = mmc_get_env_dev();
+	struct mmc *mmc = find_mmc_device(dev);
 	u32	offset;
 	int	ret, copy = 0;
 	const char *errmsg;
@@ -167,8 +173,7 @@ int saveenv(void)
 		goto fini;
 	}
 
-	printf("Writing to %sMMC(%d)... ", copy ? "redundant " : "",
-	       CONFIG_SYS_MMC_ENV_DEV);
+	printf("Writing to %sMMC(%d)... ", copy ? "redundant " : "", dev);
 	if (write_env(mmc, CONFIG_ENV_SIZE, offset, (u_char *)env_new)) {
 		puts("failed\n");
 		ret = 1;
@@ -212,7 +217,7 @@ void env_relocate_spec(void)
 	int crc1_ok = 0, crc2_ok = 0;
 	env_t *ep;
 	int ret;
-	int dev = CONFIG_SYS_MMC_ENV_DEV;
+	int dev = mmc_get_env_dev();
 	const char *errmsg = NULL;
 
 	ALLOC_CACHE_ALIGN_BUFFER(env_t, tmp_env1, 1);
@@ -298,7 +303,7 @@ void env_relocate_spec(void)
 	struct mmc *mmc;
 	u32 offset;
 	int ret;
-	int dev = CONFIG_SYS_MMC_ENV_DEV;
+	int dev = mmc_get_env_dev();
 	const char *errmsg;
 
 #ifdef CONFIG_SPL_BUILD
diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig
index baa0ed8..1cee7d4 100644
--- a/configs/chromebook_link_defconfig
+++ b/configs/chromebook_link_defconfig
@@ -1,11 +1,14 @@
 CONFIG_X86=y
 CONFIG_SYS_MALLOC_F_LEN=0x1800
+CONFIG_DM_I2C=y
 CONFIG_VENDOR_GOOGLE=y
 CONFIG_DEFAULT_DEVICE_TREE="chromebook_link"
 CONFIG_TARGET_CHROMEBOOK_LINK=y
 CONFIG_HAVE_MRC=y
 CONFIG_ENABLE_MRC_CACHE=y
+CONFIG_SMP=y
 CONFIG_HAVE_VGA_BIOS=y
+CONFIG_CMD_CPU=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
@@ -17,6 +20,10 @@ CONFIG_CMD_BOOTSTAGE=y
 CONFIG_CMD_TPM=y
 CONFIG_CMD_TPM_TEST=y
 CONFIG_OF_CONTROL=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CPU=y
+CONFIG_SYS_I2C_INTEL=y
 CONFIG_CMD_CROS_EC=y
 CONFIG_CROS_EC=y
 CONFIG_CROS_EC_LPC=y
@@ -34,6 +41,8 @@ CONFIG_SYS_NS16550=y
 CONFIG_ICH_SPI=y
 CONFIG_TIMER=y
 CONFIG_TPM_TIS_LPC=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig
index c368cc0..e4a3821 100644
--- a/configs/chromebox_panther_defconfig
+++ b/configs/chromebox_panther_defconfig
@@ -16,6 +16,8 @@ CONFIG_CMD_BOOTSTAGE=y
 CONFIG_CMD_TPM=y
 CONFIG_CMD_TPM_TEST=y
 CONFIG_OF_CONTROL=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
 CONFIG_CMD_CROS_EC=y
 CONFIG_CROS_EC=y
 CONFIG_CROS_EC_LPC=y
@@ -29,6 +31,8 @@ CONFIG_SYS_NS16550=y
 CONFIG_ICH_SPI=y
 CONFIG_TIMER=y
 CONFIG_TPM_TIS_LPC=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
diff --git a/doc/device-tree-bindings/serial/8250.txt b/doc/device-tree-bindings/serial/8250.txt
new file mode 100644
index 0000000..91d5ab0
--- /dev/null
+++ b/doc/device-tree-bindings/serial/8250.txt
@@ -0,0 +1,66 @@
+* UART (Universal Asynchronous Receiver/Transmitter)
+
+Required properties:
+- compatible : one of:
+	- "ns8250"
+	- "ns16450"
+	- "ns16550a"
+	- "ns16550"
+	- "ns16750"
+	- "ns16850"
+	- For Tegra20, must contain "nvidia,tegra20-uart"
+	- For other Tegra, must contain '"nvidia,<chip>-uart",
+	  "nvidia,tegra20-uart"' where <chip> is tegra30, tegra114, tegra124,
+	  tegra132, or tegra210.
+	- "nxp,lpc3220-uart"
+	- "ralink,rt2880-uart"
+	- "ibm,qpace-nwp-serial"
+	- "altr,16550-FIFO32"
+	- "altr,16550-FIFO64"
+	- "altr,16550-FIFO128"
+	- "fsl,16550-FIFO64"
+	- "fsl,ns16550"
+	- "serial" if the port type is unknown.
+- reg : offset and length of the register set for the device.
+- interrupts : should contain uart interrupt.
+- clock-frequency : the input clock frequency for the UART
+	 or
+  clocks phandle to refer to the clk used as per Documentation/devicetree
+  /bindings/clock/clock-bindings.txt
+
+Optional properties:
+- current-speed : the current active speed of the UART.
+- reg-offset : offset to apply to the mapbase from the start of the registers.
+- reg-shift : quantity to shift the register offsets by.
+- reg-io-width : the size (in bytes) of the IO accesses that should be
+  performed on the device.  There are some systems that require 32-bit
+  accesses to the UART (e.g. TI davinci).
+- used-by-rtas : set to indicate that the port is in use by the OpenFirmware
+  RTAS and should not be registered.
+- no-loopback-test: set to indicate that the port does not implements loopback
+  test mode
+- fifo-size: the fifo size of the UART.
+- auto-flow-control: one way to enable automatic flow control support. The
+  driver is allowed to detect support for the capability even without this
+  property.
+
+Note:
+* fsl,ns16550:
+  ------------
+  Freescale DUART is very similar to the PC16552D (and to a
+  pair of NS16550A), albeit with some nonstandard behavior such as
+  erratum A-004737 (relating to incorrect BRK handling).
+
+  Represents a single port that is compatible with the DUART found
+  on many Freescale chips (examples include mpc8349, mpc8548,
+  mpc8641d, p4080 and ls2085a).
+
+Example:
+
+	uart@80230000 {
+		compatible = "ns8250";
+		reg = <0x80230000 0x100>;
+		clock-frequency = <3686400>;
+		interrupts = <10>;
+		reg-shift = <2>;
+	};
diff --git a/doc/device-tree-bindings/serial/ns16550.txt b/doc/device-tree-bindings/serial/ns16550.txt
deleted file mode 100644
index ef0b9ae..0000000
--- a/doc/device-tree-bindings/serial/ns16550.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-NS16550 UART
-
-This UART driver supports many chip variants and is used in mamy SoCs.
-
-Required properties:
-- compatible: "ns16550" or "nvidia,tegra20-uart"
-- reg: start address and size of registers
-- reg-shift: shift value indicating register size: 0=byte, 1=16bit,2=32bit etc.
-- clock-frequency: input clock frequency for the UART (used to calculate the
-    baud rate divisor)
diff --git a/doc/device-tree-bindings/serial/omap_serial.txt b/doc/device-tree-bindings/serial/omap_serial.txt
new file mode 100644
index 0000000..7a71b5d
--- /dev/null
+++ b/doc/device-tree-bindings/serial/omap_serial.txt
@@ -0,0 +1,33 @@
+OMAP UART controller
+
+Required properties:
+- compatible : should be "ti,omap2-uart" for OMAP2 controllers
+- compatible : should be "ti,omap3-uart" for OMAP3 controllers
+- compatible : should be "ti,omap4-uart" for OMAP4 controllers
+- compatible : should be "ti,am4372-uart" for AM437x controllers
+- compatible : should be "ti,am3352-uart" for AM335x controllers
+- compatible : should be "ti,dra742-uart" for DRA7x controllers
+- reg : address and length of the register space
+- interrupts or interrupts-extended : Should contain the uart interrupt
+                                      specifier or both the interrupt
+                                      controller phandle and interrupt
+                                      specifier.
+- ti,hwmods : Must be "uart<n>", n being the instance number (1-based)
+
+Optional properties:
+- clock-frequency : frequency of the clock input to the UART
+- dmas : DMA specifier, consisting of a phandle to the DMA controller
+         node and a DMA channel number.
+- dma-names : "rx" for receive channel, "tx" for transmit channel.
+
+Example:
+
+                uart4: serial@49042000 {
+                        compatible = "ti,omap3-uart";
+                        reg = <0x49042000 0x400>;
+                        interrupts = <80>;
+                        dmas = <&sdma 81 &sdma 82>;
+                        dma-names = "tx", "rx";
+                        ti,hwmods = "uart4";
+                        clock-frequency = <48000000>;
+                };
diff --git a/doc/device-tree-bindings/serial/snps-dw-apb-uart.txt b/doc/device-tree-bindings/serial/snps-dw-apb-uart.txt
new file mode 100644
index 0000000..12bbe9f
--- /dev/null
+++ b/doc/device-tree-bindings/serial/snps-dw-apb-uart.txt
@@ -0,0 +1,76 @@
+* Synopsys DesignWare ABP UART
+
+Required properties:
+- compatible : "snps,dw-apb-uart"
+- reg : offset and length of the register set for the device.
+- interrupts : should contain uart interrupt.
+
+Clock handling:
+The clock rate of the input clock needs to be supplied by one of
+- clock-frequency : the input clock frequency for the UART.
+- clocks : phandle to the input clock
+
+The supplying peripheral clock can also be handled, needing a second property
+- clock-names: tuple listing input clock names.
+	Required elements: "baudclk", "apb_pclk"
+
+Optional properties:
+- snps,uart-16550-compatible : reflects the value of UART_16550_COMPATIBLE
+  configuration parameter. Define this if your UART does not implement the busy
+  functionality.
+- resets : phandle to the parent reset controller.
+- reg-shift : quantity to shift the register offsets by.  If this property is
+  not present then the register offsets are not shifted.
+- reg-io-width : the size (in bytes) of the IO accesses that should be
+  performed on the device.  If this property is not present then single byte
+  accesses are used.
+- dcd-override : Override the DCD modem status signal. This signal will always
+  be reported as active instead of being obtained from the modem status
+  register. Define this if your serial port does not use this pin.
+- dsr-override : Override the DTS modem status signal. This signal will always
+  be reported as active instead of being obtained from the modem status
+  register. Define this if your serial port does not use this pin.
+- cts-override : Override the CTS modem status signal. This signal will always
+  be reported as active instead of being obtained from the modem status
+  register. Define this if your serial port does not use this pin.
+- ri-override : Override the RI modem status signal. This signal will always be
+  reported as inactive instead of being obtained from the modem status register.
+  Define this if your serial port does not use this pin.
+
+Example:
+
+	uart@80230000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x80230000 0x100>;
+		clock-frequency = <3686400>;
+		interrupts = <10>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		dcd-override;
+		dsr-override;
+		cts-override;
+		ri-override;
+	};
+
+Example with one clock:
+
+	uart@80230000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x80230000 0x100>;
+		clocks = <&baudclk>;
+		interrupts = <10>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+Example with two clocks:
+
+	uart@80230000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x80230000 0x100>;
+		clocks = <&baudclk>, <&apb_pclk>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <10>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
diff --git a/drivers/Makefile b/drivers/Makefile
index 00da40b..6294048 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -51,6 +51,7 @@ obj-y += hwmon/
 obj-y += misc/
 obj-y += pcmcia/
 obj-y += dfu/
+obj-$(CONFIG_X86) += pch/
 obj-y += rtc/
 obj-y += sound/
 obj-y += timer/
diff --git a/drivers/bios_emulator/atibios.c b/drivers/bios_emulator/atibios.c
index dec6230..7717246 100644
--- a/drivers/bios_emulator/atibios.c
+++ b/drivers/bios_emulator/atibios.c
@@ -226,11 +226,19 @@ This function executes the BIOS POST code on the controller. We assume that
 at this stage the controller has its I/O and memory space enabled and
 that all other controllers are in a disabled state.
 ****************************************************************************/
+#ifdef CONFIG_DM_PCI
+static void PCI_doBIOSPOST(struct udevice *pcidev, BE_VGAInfo *vga_info,
+			   int vesa_mode, struct vbe_mode_info *mode_info)
+#else
 static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo *vga_info,
 			   int vesa_mode, struct vbe_mode_info *mode_info)
+#endif
 {
 	RMREGS regs;
 	RMSREGS sregs;
+#ifdef CONFIG_DM_PCI
+	pci_dev_t bdf;
+#endif
 
 	/* Determine the value to store in AX for BIOS POST. Per the PCI specs,
 	 AH must contain the bus and AL must contain the devfn, encoded as
@@ -238,9 +246,14 @@ static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo *vga_info,
 	 */
 	memset(&regs, 0, sizeof(regs));
 	memset(&sregs, 0, sizeof(sregs));
+#ifdef CONFIG_DM_PCI
+	bdf = dm_pci_get_bdf(pcidev);
+	regs.x.ax = (int)PCI_BUS(bdf) << 8 |
+			(int)PCI_DEV(bdf) << 3 | (int)PCI_FUNC(bdf);
+#else
 	regs.x.ax = ((int)PCI_BUS(pcidev) << 8) |
 	    ((int)PCI_DEV(pcidev) << 3) | (int)PCI_FUNC(pcidev);
-
+#endif
 	/*Setup the X86 emulator for the VGA BIOS*/
 	BE_setVGA(vga_info);
 
@@ -281,15 +294,28 @@ NOTE: This function leaves the original memory aperture disabled by leaving
       it programmed to all 1's. It must be restored to the correct value
       later.
 ****************************************************************************/
+#ifdef CONFIG_DM_PCI
+static u32 PCI_findBIOSAddr(struct udevice *pcidev, int *bar)
+#else
 static u32 PCI_findBIOSAddr(pci_dev_t pcidev, int *bar)
+#endif
 {
 	u32 base, size;
 
 	for (*bar = 0x10; *bar <= 0x14; (*bar) += 4) {
+#ifdef CONFIG_DM_PCI
+		dm_pci_read_config32(pcidev, *bar, &base);
+#else
 		pci_read_config_dword(pcidev, *bar, &base);
+#endif
 		if (!(base & 0x1)) {
+#ifdef CONFIG_DM_PCI
+			dm_pci_write_config32(pcidev, *bar, 0xFFFFFFFF);
+			dm_pci_read_config32(pcidev, *bar, &size);
+#else
 			pci_write_config_dword(pcidev, *bar, 0xFFFFFFFF);
 			pci_read_config_dword(pcidev, *bar, &size);
+#endif
 			size = ~(size & ~0xFF) + 1;
 			if (size >= MAX_BIOSLEN)
 				return base & ~0xFF;
@@ -312,11 +338,19 @@ necessary).
 Anyway to fix this we change all I/O mapped base registers and
 chop off the top bits.
 ****************************************************************************/
+#ifdef CONFIG_DM_PCI
+static void PCI_fixupIObase(struct udevice *pcidev, int reg, u32 *base)
+#else
 static void PCI_fixupIObase(pci_dev_t pcidev, int reg, u32 * base)
+#endif
 {
 	if ((*base & 0x1) && (*base > 0xFFFE)) {
 		*base &= 0xFFFF;
+#ifdef CONFIG_DM_PCI
+		dm_pci_write_config32(pcidev, reg, *base);
+#else
 		pci_write_config_dword(pcidev, reg, *base);
+#endif
 
 	}
 }
@@ -331,18 +365,30 @@ Pointers to the mapped BIOS image
 REMARKS:
 Maps a pointer to the BIOS image on the graphics card on the PCI bus.
 ****************************************************************************/
+#ifdef CONFIG_DM_PCI
+void *PCI_mapBIOSImage(struct udevice *pcidev)
+#else
 void *PCI_mapBIOSImage(pci_dev_t pcidev)
+#endif
 {
 	u32 BIOSImageBus;
 	int BIOSImageBAR;
 	u8 *BIOSImage;
 
 	/*Save PCI BAR registers that might get changed*/
+#ifdef CONFIG_DM_PCI
+	dm_pci_read_config32(pcidev, PCI_ROM_ADDRESS, &saveROMBaseAddress);
+	dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_0, &saveBaseAddress10);
+	dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14);
+	dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_2, &saveBaseAddress18);
+	dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20);
+#else
 	pci_read_config_dword(pcidev, PCI_ROM_ADDRESS, &saveROMBaseAddress);
 	pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &saveBaseAddress10);
 	pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14);
 	pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_2, &saveBaseAddress18);
 	pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20);
+#endif
 
 	/*Fix up I/O base registers to less than 64K */
 	if(saveBaseAddress14 != 0)
@@ -361,13 +407,21 @@ void *PCI_mapBIOSImage(pci_dev_t pcidev)
 		return NULL;
 	}
 
+#ifdef CONFIG_DM_PCI
+	BIOSImage = dm_pci_bus_to_virt(pcidev, BIOSImageBus,
+				       PCI_REGION_MEM, 0, MAP_NOCACHE);
+
+	/*Change the PCI BAR registers to map it onto the bus.*/
+	dm_pci_write_config32(pcidev, BIOSImageBAR, 0);
+	dm_pci_write_config32(pcidev, PCI_ROM_ADDRESS, BIOSImageBus | 0x1);
+#else
 	BIOSImage = pci_bus_to_virt(pcidev, BIOSImageBus,
 				    PCI_REGION_MEM, 0, MAP_NOCACHE);
 
 	/*Change the PCI BAR registers to map it onto the bus.*/
 	pci_write_config_dword(pcidev, BIOSImageBAR, 0);
 	pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, BIOSImageBus | 0x1);
-
+#endif
 	udelay(1);
 
 	/*Check that the BIOS image is valid. If not fail, or return the
@@ -387,6 +441,16 @@ pcidev	- PCI device info for the video card on the bus
 REMARKS:
 Unmaps the BIOS image for the device and restores framebuffer mappings
 ****************************************************************************/
+#ifdef CONFIG_DM_PCI
+void PCI_unmapBIOSImage(struct udevice *pcidev, void *BIOSImage)
+{
+	dm_pci_write_config32(pcidev, PCI_ROM_ADDRESS, saveROMBaseAddress);
+	dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_0, saveBaseAddress10);
+	dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_1, saveBaseAddress14);
+	dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_2, saveBaseAddress18);
+	dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_4, saveBaseAddress20);
+}
+#else
 void PCI_unmapBIOSImage(pci_dev_t pcidev, void *BIOSImage)
 {
 	pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, saveROMBaseAddress);
@@ -395,6 +459,7 @@ void PCI_unmapBIOSImage(pci_dev_t pcidev, void *BIOSImage)
 	pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_2, saveBaseAddress18);
 	pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_4, saveBaseAddress20);
 }
+#endif
 
 /****************************************************************************
 PARAMETERS:
@@ -408,13 +473,22 @@ REMARKS:
 Loads and POST's the display controllers BIOS, directly from the BIOS
 image we can extract over the PCI bus.
 ****************************************************************************/
+#ifdef CONFIG_DM_PCI
+static int PCI_postController(struct udevice *pcidev, uchar *bios_rom,
+			      int bios_len, BE_VGAInfo *vga_info,
+			      int vesa_mode, struct vbe_mode_info *mode_info)
+#else
 static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
 			      BE_VGAInfo *vga_info, int vesa_mode,
 			      struct vbe_mode_info *mode_info)
+#endif
 {
 	u32 bios_image_len;
 	uchar *mapped_bios;
 	uchar *copy_of_bios;
+#ifdef CONFIG_DM_PCI
+	pci_dev_t bdf;
+#endif
 
 	if (bios_rom) {
 		copy_of_bios = bios_rom;
@@ -442,9 +516,16 @@ static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
 	}
 
 	/*Save information in vga_info structure*/
+#ifdef CONFIG_DM_PCI
+	bdf = dm_pci_get_bdf(pcidev);
+	vga_info->function = PCI_FUNC(bdf);
+	vga_info->device = PCI_DEV(bdf);
+	vga_info->bus = PCI_BUS(bdf);
+#else
 	vga_info->function = PCI_FUNC(pcidev);
 	vga_info->device = PCI_DEV(pcidev);
 	vga_info->bus = PCI_BUS(pcidev);
+#endif
 	vga_info->pcidev = pcidev;
 	vga_info->BIOSImage = copy_of_bios;
 	vga_info->BIOSImageLen = bios_image_len;
@@ -462,13 +543,22 @@ static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
 	return true;
 }
 
+#ifdef CONFIG_DM_PCI
+int biosemu_setup(struct udevice *pcidev, BE_VGAInfo **vga_infop)
+#else
 int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **vga_infop)
+#endif
 {
 	BE_VGAInfo *VGAInfo;
+#ifdef CONFIG_DM_PCI
+	pci_dev_t bdf = dm_pci_get_bdf(pcidev);
 
 	printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n",
-	     PCI_BUS(pcidev), PCI_FUNC(pcidev), PCI_DEV(pcidev));
-
+	       PCI_BUS(bdf), PCI_FUNC(bdf), PCI_DEV(bdf));
+#else
+	printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n",
+	       PCI_BUS(pcidev), PCI_FUNC(pcidev), PCI_DEV(pcidev));
+#endif
 	/*Initialise the x86 BIOS emulator*/
 	if ((VGAInfo = malloc(sizeof(*VGAInfo))) == NULL) {
 		printf("videoboot: Out of memory!\n");
@@ -486,9 +576,15 @@ void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void))
 	X86EMU_setupIntrFunc(intnum, (X86EMU_intrFuncs)int_func);
 }
 
+#ifdef CONFIG_DM_PCI
+int biosemu_run(struct udevice *pcidev, uchar *bios_rom, int bios_len,
+		BE_VGAInfo *vga_info, int clean_up, int vesa_mode,
+		struct vbe_mode_info *mode_info)
+#else
 int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
 		BE_VGAInfo *vga_info, int clean_up, int vesa_mode,
 		struct vbe_mode_info *mode_info)
+#endif
 {
 	/*Post all the display controller BIOS'es*/
 	if (!PCI_postController(pcidev, bios_rom, bios_len, vga_info,
@@ -522,7 +618,12 @@ REMARKS:
 Boots the PCI/AGP video card on the bus using the Video ROM BIOS image
 and the X86 BIOS emulator module.
 ****************************************************************************/
+#ifdef CONFIG_DM_PCI
+int BootVideoCardBIOS(struct udevice *pcidev, BE_VGAInfo **pVGAInfo,
+		      int clean_up)
+#else
 int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int clean_up)
+#endif
 {
 	BE_VGAInfo *VGAInfo;
 	int ret;
diff --git a/drivers/bios_emulator/bios.c b/drivers/bios_emulator/bios.c
index dd4c0a4..77c7f94 100644
--- a/drivers/bios_emulator/bios.c
+++ b/drivers/bios_emulator/bios.c
@@ -185,12 +185,21 @@ static void X86API int1A(int unused)
 	case 0xB103:		/* Find PCI class code */
 		M.x86.R_AH = DEVICE_NOT_FOUND;
 #ifdef __KERNEL__
+#ifdef CONFIG_DM_PCI
+		dm_pci_read_config8(_BE_env.vgaInfo.pcidev, PCI_CLASS_PROG,
+				    &interface);
+		dm_pci_read_config8(_BE_env.vgaInfo.pcidev, PCI_CLASS_DEVICE,
+				    &subclass);
+		dm_pci_read_config8(_BE_env.vgaInfo.pcidev,
+				    PCI_CLASS_DEVICE + 1, &baseclass);
+#else
 		pci_read_config_byte(_BE_env.vgaInfo.pcidev, PCI_CLASS_PROG,
 				     &interface);
 		pci_read_config_byte(_BE_env.vgaInfo.pcidev, PCI_CLASS_DEVICE,
 				     &subclass);
 		pci_read_config_byte(_BE_env.vgaInfo.pcidev,
 				     PCI_CLASS_DEVICE + 1, &baseclass);
+#endif
 		if (M.x86.R_CL == interface && M.x86.R_CH == subclass
 		    && (u8) (M.x86.R_ECX >> 16) == baseclass) {
 #else
@@ -209,8 +218,13 @@ static void X86API int1A(int unused)
 		if (M.x86.R_BX == pciSlot) {
 			M.x86.R_AH = SUCCESSFUL;
 #ifdef __KERNEL__
+# ifdef CONFIG_DM_PCI
+			dm_pci_read_config8(_BE_env.vgaInfo.pcidev, M.x86.R_DI,
+					    &M.x86.R_CL);
+# else
 			pci_read_config_byte(_BE_env.vgaInfo.pcidev, M.x86.R_DI,
 					     &M.x86.R_CL);
+# endif
 #else
 			M.x86.R_CL =
 			    (u8) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_BYTE,
@@ -224,8 +238,13 @@ static void X86API int1A(int unused)
 		if (M.x86.R_BX == pciSlot) {
 			M.x86.R_AH = SUCCESSFUL;
 #ifdef __KERNEL__
+# ifdef CONFIG_DM_PCI
+			dm_pci_read_config16(_BE_env.vgaInfo.pcidev, M.x86.R_DI,
+					     &M.x86.R_CX);
+# else
 			pci_read_config_word(_BE_env.vgaInfo.pcidev, M.x86.R_DI,
 					     &M.x86.R_CX);
+# endif
 #else
 			M.x86.R_CX =
 			    (u16) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_WORD,
@@ -239,8 +258,13 @@ static void X86API int1A(int unused)
 		if (M.x86.R_BX == pciSlot) {
 			M.x86.R_AH = SUCCESSFUL;
 #ifdef __KERNEL__
+# ifdef CONFIG_DM_PCI
+			dm_pci_read_config32(_BE_env.vgaInfo.pcidev,
+					     M.x86.R_DI, &M.x86.R_ECX);
+# else
 			pci_read_config_dword(_BE_env.vgaInfo.pcidev,
 					      M.x86.R_DI, &M.x86.R_ECX);
+# endif
 #else
 			M.x86.R_ECX =
 			    (u32) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_DWORD,
@@ -254,8 +278,13 @@ static void X86API int1A(int unused)
 		if (M.x86.R_BX == pciSlot) {
 			M.x86.R_AH = SUCCESSFUL;
 #ifdef __KERNEL__
+# ifdef CONFIG_DM_PCI
+			dm_pci_write_config8(_BE_env.vgaInfo.pcidev,
+					     M.x86.R_DI, M.x86.R_CL);
+# else
 			pci_write_config_byte(_BE_env.vgaInfo.pcidev,
 					      M.x86.R_DI, M.x86.R_CL);
+# endif
 #else
 			PCI_accessReg(M.x86.R_DI, M.x86.R_CL, PCI_WRITE_BYTE,
 				      _BE_env.vgaInfo.pciInfo);
@@ -268,8 +297,13 @@ static void X86API int1A(int unused)
 		if (M.x86.R_BX == pciSlot) {
 			M.x86.R_AH = SUCCESSFUL;
 #ifdef __KERNEL__
+# ifdef CONFIG_DM_PCI
+			dm_pci_write_config32(_BE_env.vgaInfo.pcidev,
+					      M.x86.R_DI, M.x86.R_CX);
+# else
 			pci_write_config_word(_BE_env.vgaInfo.pcidev,
 					      M.x86.R_DI, M.x86.R_CX);
+# endif
 #else
 			PCI_accessReg(M.x86.R_DI, M.x86.R_CX, PCI_WRITE_WORD,
 				      _BE_env.vgaInfo.pciInfo);
@@ -282,8 +316,13 @@ static void X86API int1A(int unused)
 		if (M.x86.R_BX == pciSlot) {
 			M.x86.R_AH = SUCCESSFUL;
 #ifdef __KERNEL__
+# ifdef CONFIG_DM_PCI
+			dm_pci_write_config32(_BE_env.vgaInfo.pcidev,
+					      M.x86.R_DI, M.x86.R_ECX);
+# else
 			pci_write_config_dword(_BE_env.vgaInfo.pcidev,
 					       M.x86.R_DI, M.x86.R_ECX);
+# endif
 #else
 			PCI_accessReg(M.x86.R_DI, M.x86.R_ECX, PCI_WRITE_DWORD,
 				      _BE_env.vgaInfo.pciInfo);
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index e69de29..990f768 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -0,0 +1,9 @@
+config DISK
+	bool "Support disk controllers with driver model"
+	depends on DM
+	default y if DM
+	help
+	  This enables a uclass for disk controllers in U-Boot. Various driver
+	  types can use this, such as AHCI/SATA. It does not provide any standard
+	  operations at present. The block device interface has not been converted
+	  to driver model.
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index eb8bda9..5eb87e0 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -5,6 +5,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
+obj-$(CONFIG_DISK) += disk-uclass.o
 obj-$(CONFIG_SCSI_AHCI) += ahci.o
 obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o
 obj-$(CONFIG_FSL_SATA) += fsl_sata.o
diff --git a/drivers/block/disk-uclass.c b/drivers/block/disk-uclass.c
new file mode 100644
index 0000000..d665b35
--- /dev/null
+++ b/drivers/block/disk-uclass.c
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+
+UCLASS_DRIVER(disk) = {
+	.id		= UCLASS_DISK,
+	.name		= "disk",
+};
diff --git a/drivers/core/lists.c b/drivers/core/lists.c
index a1c9478..c4fc216 100644
--- a/drivers/core/lists.c
+++ b/drivers/core/lists.c
@@ -172,7 +172,8 @@ int lists_bind_fdt(struct udevice *parent, const void *blob, int offset,
 		dm_dbg("   - found match at '%s'\n", entry->name);
 		ret = device_bind(parent, entry, name, NULL, offset, &dev);
 		if (ret) {
-			dm_warn("Error binding driver '%s'\n", entry->name);
+			dm_warn("Error binding driver '%s': %d\n", entry->name,
+				ret);
 			return ret;
 		} else {
 			dev->driver_data = id->data;
diff --git a/drivers/core/syscon-uclass.c b/drivers/core/syscon-uclass.c
index 686c320..a0666d0 100644
--- a/drivers/core/syscon-uclass.c
+++ b/drivers/core/syscon-uclass.c
@@ -32,7 +32,7 @@ static int syscon_pre_probe(struct udevice *dev)
 	return regmap_init_mem(dev, &priv->regmap);
 }
 
-struct regmap *syscon_get_regmap_by_driver_data(ulong driver_data)
+int syscon_get_by_driver_data(ulong driver_data, struct udevice **devp)
 {
 	struct udevice *dev;
 	struct uclass *uc;
@@ -40,22 +40,29 @@ struct regmap *syscon_get_regmap_by_driver_data(ulong driver_data)
 
 	ret = uclass_get(UCLASS_SYSCON, &uc);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
 	uclass_foreach_dev(dev, uc) {
 		if (dev->driver_data == driver_data) {
-			struct syscon_uc_info *priv;
-			int ret;
-
-			ret = device_probe(dev);
-			if (ret)
-				return ERR_PTR(ret);
-			priv = dev_get_uclass_priv(dev);
-
-			return priv->regmap;
+			*devp = dev;
+			return device_probe(dev);
 		}
 	}
 
-	return ERR_PTR(-ENODEV);
+	return -ENODEV;
+}
+
+struct regmap *syscon_get_regmap_by_driver_data(ulong driver_data)
+{
+	struct syscon_uc_info *priv;
+	struct udevice *dev;
+	int ret;
+
+	ret = syscon_get_by_driver_data(driver_data, &dev);
+	if (ret)
+		return ERR_PTR(ret);
+	priv = dev_get_uclass_priv(dev);
+
+	return priv->regmap;
 }
 
 void *syscon_get_first_range(ulong driver_data)
diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c
index 22defcd..a6dc935 100644
--- a/drivers/dma/apbh_dma.c
+++ b/drivers/dma/apbh_dma.c
@@ -215,7 +215,7 @@ static int mxs_dma_reset(int channel)
 #if defined(CONFIG_MX23)
 	uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_ctrl0_set);
 	uint32_t offset = APBH_CTRL0_RESET_CHANNEL_OFFSET;
-#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6))
+#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7))
 	uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_channel_ctrl_set);
 	uint32_t offset = APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET;
 #endif
diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c
index 3ed4d89..d603b55 100644
--- a/drivers/gpio/gpio-uclass.c
+++ b/drivers/gpio/gpio-uclass.c
@@ -10,6 +10,7 @@
 #include <fdtdec.h>
 #include <malloc.h>
 #include <asm/gpio.h>
+#include <linux/bug.h>
 #include <linux/ctype.h>
 
 DECLARE_GLOBAL_DATA_PTR;
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 14adda2..46b83e7 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -58,6 +58,15 @@ config DM_I2C_GPIO
 	  bindings are supported.
 	  Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
 
+config SYS_I2C_INTEL
+	bool "Intel I2C/SMBUS driver"
+	depends on DM_I2C
+	help
+	  Add support for the Intel SMBUS driver. So far this driver is just
+	  a stub which perhaps some basic init. There is no implementation of
+	  the I2C API meaning that any I2C operations will immediately fail
+	  for now.
+
 config SYS_I2C_ROCKCHIP
 	bool "Rockchip I2C driver"
 	depends on DM_I2C
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index bbbc0dc..c75c579 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o
 obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
 obj-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
 obj-$(CONFIG_SYS_I2C_IHS) += ihs_i2c.o
+obj-$(CONFIG_SYS_I2C_INTEL) += intel_i2c.o
 obj-$(CONFIG_SYS_I2C_KONA) += kona_i2c.o
 obj-$(CONFIG_SYS_I2C_LPC32XX) += lpc32xx_i2c.o
 obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o
diff --git a/drivers/i2c/intel_i2c.c b/drivers/i2c/intel_i2c.c
new file mode 100644
index 0000000..3d777ff
--- /dev/null
+++ b/drivers/i2c/intel_i2c.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/arch/pch.h>
+
+int intel_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
+{
+	return -ENOSYS;
+}
+
+int intel_i2c_probe_chip(struct udevice *bus, uint chip_addr, uint chip_flags)
+{
+	return -ENOSYS;
+}
+
+int intel_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
+{
+	return 0;
+}
+
+static int intel_i2c_probe(struct udevice *dev)
+{
+	/*
+	 * So far this is just setup code for ivybridge SMbus. When we have
+	 * a full I2C driver this may need to be moved, generalised or made
+	 * dependant on a particular compatible string.
+	 *
+	 * Set SMBus I/O base
+	 */
+	dm_pci_write_config32(dev, SMB_BASE,
+			      SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
+
+	/* Set SMBus enable. */
+	dm_pci_write_config8(dev, HOSTC, HST_EN);
+
+	/* Set SMBus I/O space enable. */
+	dm_pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
+
+	/* Disable interrupt generation. */
+	outb(0, SMBUS_IO_BASE + SMBHSTCTL);
+
+	/* Clear any lingering errors, so transactions can run. */
+	outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+	debug("SMBus controller enabled\n");
+
+	return 0;
+}
+
+static const struct dm_i2c_ops intel_i2c_ops = {
+	.xfer		= intel_i2c_xfer,
+	.probe_chip	= intel_i2c_probe_chip,
+	.set_bus_speed	= intel_i2c_set_bus_speed,
+};
+
+static const struct udevice_id intel_i2c_ids[] = {
+	{ .compatible = "intel,ich-i2c" },
+	{ }
+};
+
+U_BOOT_DRIVER(intel_i2c) = {
+	.name	= "i2c_intel",
+	.id	= UCLASS_I2C,
+	.of_match = intel_i2c_ids,
+	.per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
+	.ops	= &intel_i2c_ops,
+	.probe	= intel_i2c_probe,
+};
diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index f15cf36..ba019a0 100644
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -30,7 +30,7 @@
 #define	MXS_NAND_DMA_DESCRIPTOR_COUNT		4
 
 #define	MXS_NAND_CHUNK_DATA_CHUNK_SIZE		512
-#if defined(CONFIG_MX6)
+#if (defined(CONFIG_MX6) || defined(CONFIG_MX7))
 #define	MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT	2
 #else
 #define	MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT	0
@@ -152,7 +152,7 @@ static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size,
 	int max_ecc_strength_supported;
 
 	/* Refer to Chapter 17 for i.MX6DQ, Chapter 18 for i.MX6SX */
-	if (is_cpu_type(MXC_CPU_MX6SX))
+	if (is_cpu_type(MXC_CPU_MX6SX) || is_soc_type(MXC_SOC_MX7))
 		max_ecc_strength_supported = 62;
 	else
 		max_ecc_strength_supported = 40;
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index f484e62..baf4e2d 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -30,6 +30,7 @@
 #include <linux/slab.h>
 #include <linux/major.h>
 #else
+#include <linux/bug.h>
 #include <linux/log2.h>
 #endif
 #include <linux/err.h>
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index f2cd32c..d4a6386 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -240,23 +240,23 @@ static void eepro100_halt (struct eth_device *dev);
 
 static inline int INW (struct eth_device *dev, u_long addr)
 {
-	return le16_to_cpu (*(volatile u16 *) (addr + dev->iobase));
+	return le16_to_cpu(*(volatile u16 *)(addr + (u_long)dev->iobase));
 }
 
 static inline void OUTW (struct eth_device *dev, int command, u_long addr)
 {
-	*(volatile u16 *) ((addr + dev->iobase)) = cpu_to_le16 (command);
+	*(volatile u16 *)((addr + (u_long)dev->iobase)) = cpu_to_le16(command);
 }
 
 static inline void OUTL (struct eth_device *dev, int command, u_long addr)
 {
-	*(volatile u32 *) ((addr + dev->iobase)) = cpu_to_le32 (command);
+	*(volatile u32 *)((addr + (u_long)dev->iobase)) = cpu_to_le32(command);
 }
 
 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
 static inline int INL (struct eth_device *dev, u_long addr)
 {
-	return le32_to_cpu (*(volatile u32 *) (addr + dev->iobase));
+	return le32_to_cpu(*(volatile u32 *)(addr + (u_long)dev->iobase));
 }
 
 static int get_phyreg (struct eth_device *dev, unsigned char addr,
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index bac4610..4b9b372 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -5,6 +5,7 @@
  */
 #include <common.h>
 #include <errno.h>
+#include <linux/bug.h>
 #include <asm/io.h>
 #include <libfdt.h>
 #include <fdt_support.h>
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 7059c84..97e30f3 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -19,6 +19,7 @@
 #include <asm/io.h>
 #include <phy.h>
 #include <miiphy.h>
+#include <wait_bit.h>
 #include <watchdog.h>
 #include <asm/system.h>
 #include <asm/arch/hardware.h>
@@ -448,38 +449,6 @@ static int zynq_gem_init(struct udevice *dev)
 	return 0;
 }
 
-static int wait_for_bit(const char *func, u32 *reg, const u32 mask,
-			bool set, unsigned int timeout)
-{
-	u32 val;
-	unsigned long start = get_timer(0);
-
-	while (1) {
-		val = readl(reg);
-
-		if (!set)
-			val = ~val;
-
-		if ((val & mask) == mask)
-			return 0;
-
-		if (get_timer(start) > timeout)
-			break;
-
-		if (ctrlc()) {
-			puts("Abort\n");
-			return -EINTR;
-		}
-
-		udelay(1);
-	}
-
-	debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
-	      func, reg, mask, set);
-
-	return -ETIMEDOUT;
-}
-
 static int zynq_gem_send(struct udevice *dev, void *ptr, int len)
 {
 	u32 addr, size;
@@ -521,7 +490,7 @@ static int zynq_gem_send(struct udevice *dev, void *ptr, int len)
 		printf("TX buffers exhausted in mid frame\n");
 
 	return wait_for_bit(__func__, &regs->txsr, ZYNQ_GEM_TSR_DONE,
-			    true, 20000);
+			    true, 20000, true);
 }
 
 /* Do not check frame_recd flag in rx_status register 0x20 - just poll BD */
diff --git a/drivers/pch/Makefile b/drivers/pch/Makefile
new file mode 100644
index 0000000..dde9e86
--- /dev/null
+++ b/drivers/pch/Makefile
@@ -0,0 +1,7 @@
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += pch-uclass.o
+obj-y += pch7.o
+obj-y += pch9.o
diff --git a/arch/x86/lib/pch-uclass.c b/drivers/pch/pch-uclass.c
index 20dfa81..4579ed1 100644
--- a/arch/x86/lib/pch-uclass.c
+++ b/drivers/pch/pch-uclass.c
@@ -7,10 +7,42 @@
 
 #include <common.h>
 #include <dm.h>
+#include <pch.h>
 #include <dm/root.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+int pch_get_sbase(struct udevice *dev, ulong *sbasep)
+{
+	struct pch_ops *ops = pch_get_ops(dev);
+
+	*sbasep = 0;
+	if (!ops->get_sbase)
+		return -ENOSYS;
+
+	return ops->get_sbase(dev, sbasep);
+}
+
+enum pch_version pch_get_version(struct udevice *dev)
+{
+	struct pch_ops *ops = pch_get_ops(dev);
+
+	if (!ops->get_version)
+		return -ENOSYS;
+
+	return ops->get_version(dev);
+}
+
+int pch_set_spi_protect(struct udevice *dev, bool protect)
+{
+	struct pch_ops *ops = pch_get_ops(dev);
+
+	if (!ops->set_spi_protect)
+		return -ENOSYS;
+
+	return ops->set_spi_protect(dev, protect);
+}
+
 static int pch_uclass_post_bind(struct udevice *bus)
 {
 	/*
diff --git a/drivers/pch/pch7.c b/drivers/pch/pch7.c
new file mode 100644
index 0000000..ef72422
--- /dev/null
+++ b/drivers/pch/pch7.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <pch.h>
+
+#define BIOS_CTRL	0xd8
+
+static int pch7_get_sbase(struct udevice *dev, ulong *sbasep)
+{
+	u32 rcba;
+
+	dm_pci_read_config32(dev, PCH_RCBA, &rcba);
+	/* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable */
+	rcba = rcba & 0xffffc000;
+	*sbasep = rcba + 0x3020;
+
+	return 0;
+}
+
+static enum pch_version pch7_get_version(struct udevice *dev)
+{
+	return PCHV_7;
+}
+
+static int pch7_set_spi_protect(struct udevice *dev, bool protect)
+{
+	uint8_t bios_cntl;
+
+	/* Adjust the BIOS write protect to dis/allow write commands */
+	dm_pci_read_config8(dev, BIOS_CTRL, &bios_cntl);
+	if (protect)
+		bios_cntl &= ~BIOS_CTRL_BIOSWE;
+	else
+		bios_cntl |= BIOS_CTRL_BIOSWE;
+	dm_pci_write_config8(dev, BIOS_CTRL, bios_cntl);
+
+	return 0;
+}
+
+static const struct pch_ops pch7_ops = {
+	.get_sbase	= pch7_get_sbase,
+	.get_version	= pch7_get_version,
+	.set_spi_protect = pch7_set_spi_protect,
+};
+
+static const struct udevice_id pch7_ids[] = {
+	{ .compatible = "intel,pch7" },
+	{ }
+};
+
+U_BOOT_DRIVER(pch7_drv) = {
+	.name		= "intel-pch7",
+	.id		= UCLASS_PCH,
+	.of_match	= pch7_ids,
+	.ops		= &pch7_ops,
+};
diff --git a/drivers/pch/pch9.c b/drivers/pch/pch9.c
new file mode 100644
index 0000000..529cb02
--- /dev/null
+++ b/drivers/pch/pch9.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <pch.h>
+
+#define SBASE_ADDR	0x54
+
+static int pch9_get_sbase(struct udevice *dev, ulong *sbasep)
+{
+	uint32_t sbase_addr;
+
+	dm_pci_read_config32(dev, SBASE_ADDR, &sbase_addr);
+	*sbasep = sbase_addr & 0xfffffe00;
+
+	return 0;
+}
+
+static enum pch_version pch9_get_version(struct udevice *dev)
+{
+	return PCHV_9;
+}
+
+static const struct pch_ops pch9_ops = {
+	.get_sbase	= pch9_get_sbase,
+	.get_version	= pch9_get_version,
+};
+
+static const struct udevice_id pch9_ids[] = {
+	{ .compatible = "intel,pch9" },
+	{ }
+};
+
+U_BOOT_DRIVER(pch9_drv) = {
+	.name		= "intel-pch9",
+	.id		= UCLASS_PCH,
+	.of_match	= pch9_ids,
+	.ops		= &pch9_ops,
+};
diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c
index 685df9d..61292d7 100644
--- a/drivers/pci/pci-uclass.c
+++ b/drivers/pci/pci-uclass.c
@@ -22,7 +22,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static int pci_get_bus(int busnum, struct udevice **busp)
+int pci_get_bus(int busnum, struct udevice **busp)
 {
 	int ret;
 
@@ -41,20 +41,6 @@ static int pci_get_bus(int busnum, struct udevice **busp)
 	return ret;
 }
 
-struct pci_controller *pci_bus_to_hose(int busnum)
-{
-	struct udevice *bus;
-	int ret;
-
-	ret = pci_get_bus(busnum, &bus);
-	if (ret) {
-		debug("%s: Cannot get bus %d: ret=%d\n", __func__, busnum, ret);
-		return NULL;
-	}
-
-	return dev_get_uclass_priv(bus);
-}
-
 struct udevice *pci_get_controller(struct udevice *dev)
 {
 	while (device_is_on_pci_bus(dev))
@@ -1067,6 +1053,14 @@ u32 dm_pci_read_bar32(struct udevice *dev, int barnum)
 		return addr & PCI_BASE_ADDRESS_MEM_MASK;
 }
 
+void dm_pci_write_bar32(struct udevice *dev, int barnum, u32 addr)
+{
+	int bar;
+
+	bar = PCI_BASE_ADDRESS_0 + barnum * 4;
+	dm_pci_write_config32(dev, bar, addr);
+}
+
 static int _dm_pci_bus_to_phys(struct udevice *ctlr,
 			       pci_addr_t bus_addr, unsigned long flags,
 			       unsigned long skip_mask, phys_addr_t *pa)
diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
index 5cfa135..88bc416 100644
--- a/drivers/pci/pci_auto.c
+++ b/drivers/pci/pci_auto.c
@@ -9,6 +9,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <errno.h>
 #include <pci.h>
 
@@ -167,8 +168,8 @@ void dm_pciauto_prescan_setup_bridge(struct udevice *dev, int sub_bus)
 	struct pci_region *pci_prefetch;
 	struct pci_region *pci_io;
 	u16 cmdstat, prefechable_64;
-	/* The root controller has the region information */
-	struct pci_controller *ctlr_hose = pci_bus_to_hose(0);
+	struct udevice *ctlr = pci_get_controller(dev);
+	struct pci_controller *ctlr_hose = dev_get_uclass_priv(ctlr);
 
 	pci_mem = ctlr_hose->pci_mem;
 	pci_prefetch = ctlr_hose->pci_prefetch;
@@ -248,9 +249,8 @@ void dm_pciauto_postscan_setup_bridge(struct udevice *dev, int sub_bus)
 	struct pci_region *pci_mem;
 	struct pci_region *pci_prefetch;
 	struct pci_region *pci_io;
-
-	/* The root controller has the region information */
-	struct pci_controller *ctlr_hose = pci_bus_to_hose(0);
+	struct udevice *ctlr = pci_get_controller(dev);
+	struct pci_controller *ctlr_hose = dev_get_uclass_priv(ctlr);
 
 	pci_mem = ctlr_hose->pci_mem;
 	pci_prefetch = ctlr_hose->pci_prefetch;
@@ -311,13 +311,13 @@ int dm_pciauto_config_device(struct udevice *dev)
 	unsigned int sub_bus = PCI_BUS(dm_pci_get_bdf(dev));
 	unsigned short class;
 	bool enum_only = false;
+	struct udevice *ctlr = pci_get_controller(dev);
+	struct pci_controller *ctlr_hose = dev_get_uclass_priv(ctlr);
 	int n;
 
 #ifdef CONFIG_PCI_ENUM_ONLY
 	enum_only = true;
 #endif
-	/* The root controller has the region information */
-	struct pci_controller *ctlr_hose = pci_bus_to_hose(0);
 
 	pci_mem = ctlr_hose->pci_mem;
 	pci_prefetch = ctlr_hose->pci_prefetch;
diff --git a/drivers/pci/pci_compat.c b/drivers/pci/pci_compat.c
index dd15eb1..ddaf358 100644
--- a/drivers/pci/pci_compat.c
+++ b/drivers/pci/pci_compat.c
@@ -12,6 +12,7 @@
 #include <pci.h>
 #include <dm/device-internal.h>
 #include <dm/lists.h>
+#include "pci_internal.h"
 
 #define PCI_HOSE_OP(rw, name, size, type)				\
 int pci_hose_##rw##_config_##name(struct pci_controller *hose,		\
@@ -36,3 +37,17 @@ pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
 		return -1;
 	return dm_pci_get_bdf(dev);
 }
+
+struct pci_controller *pci_bus_to_hose(int busnum)
+{
+	struct udevice *bus;
+	int ret;
+
+	ret = pci_get_bus(busnum, &bus);
+	if (ret) {
+		debug("%s: Cannot get bus %d: ret=%d\n", __func__, busnum, ret);
+		return NULL;
+	}
+
+	return dev_get_uclass_priv(bus);
+}
diff --git a/drivers/pci/pci_internal.h b/drivers/pci/pci_internal.h
index 0867575..616b9c1 100644
--- a/drivers/pci/pci_internal.h
+++ b/drivers/pci/pci_internal.h
@@ -47,4 +47,16 @@ void dm_pciauto_postscan_setup_bridge(struct udevice *dev, int sub_bus);
  */
 int dm_pciauto_config_device(struct udevice *dev);
 
+/**
+ * pci_get_bus() - Get a pointer to a bus, given its number
+ *
+ * This looks up a PCI bus based on its bus number. The bus is probed if
+ * necessary.
+ *
+ * @busnum:	PCI bus number to look up
+ * @busp:	Returns PCI bus on success
+ * @return 0 on success, or -ve error
+ */
+int pci_get_bus(int busnum, struct udevice **busp);
+
 #endif
diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c
index ed2f61d..d5bf6f4 100644
--- a/drivers/pci/pci_rom.c
+++ b/drivers/pci/pci_rom.c
@@ -328,12 +328,12 @@ int dm_pci_run_vga_bios(struct udevice *dev, int (*int15_handler)(void),
 #ifdef CONFIG_BIOSEMU
 		BE_VGAInfo *info;
 
-		ret = biosemu_setup(dm_pci_get_bdf(dev), &info);
+		ret = biosemu_setup(dev, &info);
 		if (ret)
 			goto err;
 		biosemu_set_interrupt_handler(0x15, int15_handler);
-		ret = biosemu_run(dm_pci_get_bdf(dev), (uchar *)ram, 1 << 16,
-				  info, true, vesa_mode, &mode_info);
+		ret = biosemu_run(dev, (uchar *)ram, 1 << 16, info,
+				  true, vesa_mode, &mode_info);
 		if (ret)
 			goto err;
 #endif
diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier.h b/drivers/pinctrl/uniphier/pinctrl-uniphier.h
index 7eaec6a..6bdebf2 100644
--- a/drivers/pinctrl/uniphier/pinctrl-uniphier.h
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier.h
@@ -7,9 +7,7 @@
 #ifndef __PINCTRL_UNIPHIER_H__
 #define __PINCTRL_UNIPHIER_H__
 
-/* TODO: move this to include/linux/bug.h */
-#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
-
+#include <linux/bug.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 021b211..93dad33 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -423,11 +423,15 @@ const struct dm_serial_ops ns16550_serial_ops = {
 };
 
 #if CONFIG_IS_ENABLED(OF_CONTROL)
+/*
+ * Please consider existing compatible strings before adding a new
+ * one to keep this table compact. Or you may add a generic "ns16550"
+ * compatible string to your dts.
+ */
 static const struct udevice_id ns16550_serial_ids[] = {
 	{ .compatible = "ns16550" },
 	{ .compatible = "ns16550a" },
 	{ .compatible = "nvidia,tegra20-uart" },
-	{ .compatible = "rockchip,rk3036-uart" },
 	{ .compatible = "snps,dw-apb-uart" },
 	{ .compatible = "ti,omap2-uart" },
 	{ .compatible = "ti,omap3-uart" },
diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
index 799ef6a..fcb1e95 100644
--- a/drivers/serial/serial_ns16550.c
+++ b/drivers/serial/serial_ns16550.c
@@ -127,11 +127,6 @@ static void _serial_putc(const char c, const int port)
 	NS16550_putc(PORT, c);
 }
 
-static void _serial_putc_raw(const char c, const int port)
-{
-	NS16550_putc(PORT, c);
-}
-
 static void _serial_puts(const char *s, const int port)
 {
 	while (*s) {
@@ -165,12 +160,6 @@ serial_putc_dev(unsigned int dev_index,const char c)
 }
 
 static inline void
-serial_putc_raw_dev(unsigned int dev_index,const char c)
-{
-	_serial_putc_raw(c,dev_index);
-}
-
-static inline void
 serial_puts_dev(unsigned int dev_index,const char *s)
 {
 	_serial_puts(s,dev_index);
diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c
index 59eaaea..e543b8f 100644
--- a/drivers/spi/ich.c
+++ b/drivers/spi/ich.c
@@ -5,14 +5,14 @@
  *
  * This file is derived from the flashrom project.
  */
-
 #include <common.h>
 #include <dm.h>
 #include <errno.h>
 #include <malloc.h>
-#include <spi.h>
+#include <pch.h>
 #include <pci.h>
 #include <pci_ids.h>
+#include <spi.h>
 #include <asm/io.h>
 
 #include "ich.h"
@@ -20,10 +20,14 @@
 #define SPI_OPCODE_WREN      0x06
 #define SPI_OPCODE_FAST_READ 0x0b
 
+#ifdef DEBUG_TRACE
+#define debug_trace(fmt, args...) debug(fmt, ##args)
+#else
+#define debug_trace(x, args...)
+#endif
+
 struct ich_spi_platdata {
-	pci_dev_t dev;		/* PCI device number */
-	int ich_version;	/* Controller version, 7 or 9 */
-	bool use_sbase;		/* Use SBASE instead of RCB */
+	enum pch_version ich_version;	/* Controller version, 7 or 9 */
 };
 
 struct ich_spi_priv {
@@ -52,7 +56,7 @@ static u8 ich_readb(struct ich_spi_priv *priv, int reg)
 {
 	u8 value = readb(priv->base + reg);
 
-	debug("read %2.2x from %4.4x\n", value, reg);
+	debug_trace("read %2.2x from %4.4x\n", value, reg);
 
 	return value;
 }
@@ -61,7 +65,7 @@ static u16 ich_readw(struct ich_spi_priv *priv, int reg)
 {
 	u16 value = readw(priv->base + reg);
 
-	debug("read %4.4x from %4.4x\n", value, reg);
+	debug_trace("read %4.4x from %4.4x\n", value, reg);
 
 	return value;
 }
@@ -70,7 +74,7 @@ static u32 ich_readl(struct ich_spi_priv *priv, int reg)
 {
 	u32 value = readl(priv->base + reg);
 
-	debug("read %8.8x from %4.4x\n", value, reg);
+	debug_trace("read %8.8x from %4.4x\n", value, reg);
 
 	return value;
 }
@@ -78,19 +82,19 @@ static u32 ich_readl(struct ich_spi_priv *priv, int reg)
 static void ich_writeb(struct ich_spi_priv *priv, u8 value, int reg)
 {
 	writeb(value, priv->base + reg);
-	debug("wrote %2.2x to %4.4x\n", value, reg);
+	debug_trace("wrote %2.2x to %4.4x\n", value, reg);
 }
 
 static void ich_writew(struct ich_spi_priv *priv, u16 value, int reg)
 {
 	writew(value, priv->base + reg);
-	debug("wrote %4.4x to %4.4x\n", value, reg);
+	debug_trace("wrote %4.4x to %4.4x\n", value, reg);
 }
 
 static void ich_writel(struct ich_spi_priv *priv, u32 value, int reg)
 {
 	writel(value, priv->base + reg);
-	debug("wrote %8.8x to %4.4x\n", value, reg);
+	debug_trace("wrote %8.8x to %4.4x\n", value, reg);
 }
 
 static void write_reg(struct ich_spi_priv *priv, const void *value,
@@ -116,40 +120,16 @@ static void ich_set_bbar(struct ich_spi_priv *ctlr, uint32_t minaddr)
 	ich_writel(ctlr, ichspi_bbar, ctlr->bbar);
 }
 
-/*
- * Check if this device ID matches one of supported Intel PCH devices.
- *
- * Return the ICH version if there is a match, or zero otherwise.
- */
-static int get_ich_version(uint16_t device_id)
-{
-	if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC ||
-	    device_id == PCI_DEVICE_ID_INTEL_ITC_LPC ||
-	    device_id == PCI_DEVICE_ID_INTEL_QRK_ILB)
-		return 7;
-
-	if ((device_id >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN &&
-	     device_id <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX) ||
-	    (device_id >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN &&
-	     device_id <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX) ||
-	    device_id == PCI_DEVICE_ID_INTEL_VALLEYVIEW_LPC ||
-	    device_id == PCI_DEVICE_ID_INTEL_LYNXPOINT_LPC ||
-	    device_id == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LPC)
-		return 9;
-
-	return 0;
-}
-
 /* @return 1 if the SPI flash supports the 33MHz speed */
-static int ich9_can_do_33mhz(pci_dev_t dev)
+static int ich9_can_do_33mhz(struct udevice *dev)
 {
 	u32 fdod, speed;
 
 	/* Observe SPI Descriptor Component Section 0 */
-	pci_write_config_dword(dev, 0xb0, 0x1000);
+	dm_pci_write_config32(dev->parent, 0xb0, 0x1000);
 
 	/* Extract the Write/Erase SPI Frequency from descriptor */
-	pci_read_config_dword(dev, 0xb4, &fdod);
+	dm_pci_read_config32(dev->parent, 0xb4, &fdod);
 
 	/* Bits 23:21 have the fast read clock frequency, 0=20MHz, 1=33MHz */
 	speed = (fdod >> 21) & 7;
@@ -157,59 +137,22 @@ static int ich9_can_do_33mhz(pci_dev_t dev)
 	return speed == 1;
 }
 
-static int ich_find_spi_controller(struct ich_spi_platdata *ich)
-{
-	int last_bus = pci_last_busno();
-	int bus;
-
-	if (last_bus == -1) {
-		debug("No PCI busses?\n");
-		return -ENODEV;
-	}
-
-	for (bus = 0; bus <= last_bus; bus++) {
-		uint16_t vendor_id, device_id;
-		uint32_t ids;
-		pci_dev_t dev;
-
-		dev = PCI_BDF(bus, 31, 0);
-		pci_read_config_dword(dev, 0, &ids);
-		vendor_id = ids;
-		device_id = ids >> 16;
-
-		if (vendor_id == PCI_VENDOR_ID_INTEL) {
-			ich->dev = dev;
-			ich->ich_version = get_ich_version(device_id);
-			if (device_id == PCI_DEVICE_ID_INTEL_VALLEYVIEW_LPC)
-				ich->use_sbase = true;
-			return ich->ich_version == 0 ? -ENODEV : 0;
-		}
-	}
-
-	debug("ICH SPI: No ICH found.\n");
-	return -ENODEV;
-}
-
-static int ich_init_controller(struct ich_spi_platdata *plat,
+static int ich_init_controller(struct udevice *dev,
+			       struct ich_spi_platdata *plat,
 			       struct ich_spi_priv *ctlr)
 {
-	uint8_t *rcrb; /* Root Complex Register Block */
-	uint32_t rcba; /* Root Complex Base Address */
-	uint32_t sbase_addr;
-	uint8_t *sbase;
-
-	pci_read_config_dword(plat->dev, 0xf0, &rcba);
-	/* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */
-	rcrb = (uint8_t *)(rcba & 0xffffc000);
+	ulong sbase_addr;
+	void *sbase;
 
 	/* SBASE is similar */
-	pci_read_config_dword(plat->dev, 0x54, &sbase_addr);
-	sbase = (uint8_t *)(sbase_addr & 0xfffffe00);
+	pch_get_sbase(dev->parent, &sbase_addr);
+	sbase = (void *)sbase_addr;
+	debug("%s: sbase=%p\n", __func__, sbase);
 
-	if (plat->ich_version == 7) {
-		struct ich7_spi_regs *ich7_spi;
+	if (plat->ich_version == PCHV_7) {
+		struct ich7_spi_regs *ich7_spi = sbase;
 
-		ich7_spi = (struct ich7_spi_regs *)(rcrb + 0x3020);
+		ich7_spi = (struct ich7_spi_regs *)sbase;
 		ctlr->ichspi_lock = readw(&ich7_spi->spis) & SPIS_LOCK;
 		ctlr->opmenu = offsetof(struct ich7_spi_regs, opmenu);
 		ctlr->menubytes = sizeof(ich7_spi->opmenu);
@@ -222,13 +165,9 @@ static int ich_init_controller(struct ich_spi_platdata *plat,
 		ctlr->bbar = offsetof(struct ich7_spi_regs, bbar);
 		ctlr->preop = offsetof(struct ich7_spi_regs, preop);
 		ctlr->base = ich7_spi;
-	} else if (plat->ich_version == 9) {
-		struct ich9_spi_regs *ich9_spi;
+	} else if (plat->ich_version == PCHV_9) {
+		struct ich9_spi_regs *ich9_spi = sbase;
 
-		if (plat->use_sbase)
-			ich9_spi = (struct ich9_spi_regs *)sbase;
-		else
-			ich9_spi = (struct ich9_spi_regs *)(rcrb + 0x3800);
 		ctlr->ichspi_lock = readw(&ich9_spi->hsfs) & HSFS_FLOCKDN;
 		ctlr->opmenu = offsetof(struct ich9_spi_regs, opmenu);
 		ctlr->menubytes = sizeof(ich9_spi->opmenu);
@@ -252,9 +191,9 @@ static int ich_init_controller(struct ich_spi_platdata *plat,
 
 	/* Work out the maximum speed we can support */
 	ctlr->max_speed = 20000000;
-	if (plat->ich_version == 9 && ich9_can_do_33mhz(plat->dev))
+	if (plat->ich_version == PCHV_9 && ich9_can_do_33mhz(dev))
 		ctlr->max_speed = 33000000;
-	debug("ICH SPI: Version %d detected at %p, speed %ld\n",
+	debug("ICH SPI: Version ID %d detected at %p, speed %ld\n",
 	      plat->ich_version, ctlr->base, ctlr->max_speed);
 
 	ich_set_bbar(ctlr, 0);
@@ -447,7 +386,7 @@ static int ich_spi_xfer(struct udevice *dev, unsigned int bitlen,
 		}
 		memcpy(trans->cmd, dout, bytes);
 		trans->cmd_len = bytes;
-		debug("ICH SPI: Saved %d bytes\n", bytes);
+		debug_trace("ICH SPI: Saved %d bytes\n", bytes);
 		return 0;
 	}
 
@@ -462,7 +401,7 @@ static int ich_spi_xfer(struct udevice *dev, unsigned int bitlen,
 		trans->out = trans->cmd;
 		trans->bytesout = trans->cmd_len;
 		using_cmd = 1;
-		debug("ICH SPI: Using %d bytes\n", trans->cmd_len);
+		debug_trace("ICH SPI: Using %d bytes\n", trans->cmd_len);
 	} else {
 		trans->out = dout;
 		trans->bytesout = dout ? bytes : 0;
@@ -481,7 +420,7 @@ static int ich_spi_xfer(struct udevice *dev, unsigned int bitlen,
 	if (ret < 0)
 		return ret;
 
-	if (plat->ich_version == 7)
+	if (plat->ich_version == PCHV_7)
 		ich_writew(ctlr, SPIS_CDS | SPIS_FCERR, ctlr->status);
 	else
 		ich_writeb(ctlr, SPIS_CDS | SPIS_FCERR, ctlr->status);
@@ -520,7 +459,7 @@ static int ich_spi_xfer(struct udevice *dev, unsigned int bitlen,
 	if (using_cmd && dout && bytes) {
 		trans->out = dout;
 		trans->bytesout = bytes;
-		debug("ICH SPI: Moving to data, %d bytes\n", bytes);
+		debug_trace("ICH SPI: Moving to data, %d bytes\n", bytes);
 	}
 
 	/* Preset control fields */
@@ -676,30 +615,30 @@ int spi_write_protect_region(struct udevice *dev, uint32_t lower_limit,
 	return 0;
 }
 
-static int ich_spi_probe(struct udevice *bus)
+static int ich_spi_probe(struct udevice *dev)
 {
-	struct ich_spi_platdata *plat = dev_get_platdata(bus);
-	struct ich_spi_priv *priv = dev_get_priv(bus);
+	struct ich_spi_platdata *plat = dev_get_platdata(dev);
+	struct ich_spi_priv *priv = dev_get_priv(dev);
 	uint8_t bios_cntl;
 	int ret;
 
-	ret = ich_init_controller(plat, priv);
+	/* Check the ICH version */
+	plat->ich_version = pch_get_version(dev->parent);
+
+	ret = ich_init_controller(dev, plat, priv);
 	if (ret)
 		return ret;
-	/*
-	 * Disable the BIOS write protect so write commands are allowed.  On
-	 * v9, deassert SMM BIOS Write Protect Disable.
-	 */
-	if (plat->use_sbase) {
+	/* Disable the BIOS write protect so write commands are allowed */
+	ret = pch_set_spi_protect(dev->parent, false);
+	if (ret == -ENOSYS) {
 		bios_cntl = ich_readb(priv, priv->bcr);
 		bios_cntl &= ~BIT(5);	/* clear Enable InSMM_STS (EISS) */
 		bios_cntl |= 1;		/* Write Protect Disable (WPD) */
 		ich_writeb(priv, bios_cntl, priv->bcr);
-	} else {
-		pci_read_config_byte(plat->dev, 0xdc, &bios_cntl);
-		if (plat->ich_version == 9)
-			bios_cntl &= ~BIT(5);
-		pci_write_config_byte(plat->dev, 0xdc, bios_cntl | 0x1);
+	} else if (ret) {
+		debug("%s: Failed to disable write-protect: err=%d\n",
+		      __func__, ret);
+		return ret;
 	}
 
 	priv->cur_speed = priv->max_speed;
@@ -707,18 +646,6 @@ static int ich_spi_probe(struct udevice *bus)
 	return 0;
 }
 
-static int ich_spi_ofdata_to_platdata(struct udevice *bus)
-{
-	struct ich_spi_platdata *plat = dev_get_platdata(bus);
-	int ret;
-
-	ret = ich_find_spi_controller(plat);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
 static int ich_spi_set_speed(struct udevice *bus, uint speed)
 {
 	struct ich_spi_priv *priv = dev_get_priv(bus);
@@ -751,7 +678,7 @@ static int ich_spi_child_pre_probe(struct udevice *dev)
 	 * ICH 7 SPI controller only supports array read command
 	 * and byte program command for SST flash
 	 */
-	if (plat->ich_version == 7) {
+	if (plat->ich_version == PCHV_7) {
 		slave->mode_rx = SPI_RX_SLOW;
 		slave->mode = SPI_TX_BYTE;
 	}
@@ -779,7 +706,6 @@ U_BOOT_DRIVER(ich_spi) = {
 	.id	= UCLASS_SPI,
 	.of_match = ich_spi_ids,
 	.ops	= &ich_spi_ops,
-	.ofdata_to_platdata = ich_spi_ofdata_to_platdata,
 	.platdata_auto_alloc_size = sizeof(struct ich_spi_platdata),
 	.priv_auto_alloc_size = sizeof(struct ich_spi_priv),
 	.child_pre_probe = ich_spi_child_pre_probe,
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 8ff949d..25ccc01 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -18,6 +18,7 @@
 #include <malloc.h>
 #include <asm/dma-mapping.h>
 #include <usb/lin_gadget_compat.h>
+#include <linux/bug.h>
 #include <linux/list.h>
 
 #include <linux/usb/ch9.h>
diff --git a/drivers/usb/dwc3/linux-compat.h b/drivers/usb/dwc3/linux-compat.h
index 6c9c279..9e944a3 100644
--- a/drivers/usb/dwc3/linux-compat.h
+++ b/drivers/usb/dwc3/linux-compat.h
@@ -17,8 +17,6 @@
 #define dev_WARN(dev, format, arg...)	debug(format, ##arg)
 #define WARN_ON_ONCE(val)		debug("Error %d\n", val)
 
-#define BUILD_BUG_ON_NOT_POWER_OF_2(n)
-
 static inline size_t strlcat(char *dest, const char *src, size_t n)
 {
 	strcat(dest, src);
diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
index b272c57..c6727c3 100644
--- a/drivers/usb/host/dwc2.c
+++ b/drivers/usb/host/dwc2.c
@@ -13,6 +13,7 @@
 #include <memalign.h>
 #include <phys2bus.h>
 #include <usbroothubdes.h>
+#include <wait_bit.h>
 #include <asm/io.h>
 
 #include "dwc2.h"
@@ -53,27 +54,6 @@ static struct dwc2_priv local;
 /*
  * DWC2 IP interface
  */
-static int wait_for_bit(void *reg, const uint32_t mask, bool set)
-{
-	unsigned int timeout = 1000000;
-	uint32_t val;
-
-	while (--timeout) {
-		val = readl(reg);
-		if (!set)
-			val = ~val;
-
-		if ((val & mask) == mask)
-			return 0;
-
-		udelay(1);
-	}
-
-	debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
-	      __func__, reg, mask, set);
-
-	return -ETIMEDOUT;
-}
 
 /*
  * Initializes the FSLSPClkSel field of the HCFG register
@@ -118,7 +98,8 @@ static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num)
 
 	writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET),
 	       &regs->grstctl);
-	ret = wait_for_bit(&regs->grstctl, DWC2_GRSTCTL_TXFFLSH, 0);
+	ret = wait_for_bit(__func__, &regs->grstctl, DWC2_GRSTCTL_TXFFLSH,
+			   false, 1000, false);
 	if (ret)
 		printf("%s: Timeout!\n", __func__);
 
@@ -136,7 +117,8 @@ static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs)
 	int ret;
 
 	writel(DWC2_GRSTCTL_RXFFLSH, &regs->grstctl);
-	ret = wait_for_bit(&regs->grstctl, DWC2_GRSTCTL_RXFFLSH, 0);
+	ret = wait_for_bit(__func__, &regs->grstctl, DWC2_GRSTCTL_RXFFLSH,
+			   false, 1000, false);
 	if (ret)
 		printf("%s: Timeout!\n", __func__);
 
@@ -153,13 +135,15 @@ static void dwc_otg_core_reset(struct dwc2_core_regs *regs)
 	int ret;
 
 	/* Wait for AHB master IDLE state. */
-	ret = wait_for_bit(&regs->grstctl, DWC2_GRSTCTL_AHBIDLE, 1);
+	ret = wait_for_bit(__func__, &regs->grstctl, DWC2_GRSTCTL_AHBIDLE,
+			   true, 1000, false);
 	if (ret)
 		printf("%s: Timeout!\n", __func__);
 
 	/* Core Soft Reset */
 	writel(DWC2_GRSTCTL_CSFTRST, &regs->grstctl);
-	ret = wait_for_bit(&regs->grstctl, DWC2_GRSTCTL_CSFTRST, 0);
+	ret = wait_for_bit(__func__, &regs->grstctl, DWC2_GRSTCTL_CSFTRST,
+			   false, 1000, false);
 	if (ret)
 		printf("%s: Timeout!\n", __func__);
 
@@ -244,8 +228,8 @@ static void dwc_otg_core_host_init(struct dwc2_core_regs *regs)
 		clrsetbits_le32(&regs->hc_regs[i].hcchar,
 				DWC2_HCCHAR_EPDIR,
 				DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS);
-		ret = wait_for_bit(&regs->hc_regs[i].hcchar,
-				   DWC2_HCCHAR_CHEN, 0);
+		ret = wait_for_bit(__func__, &regs->hc_regs[i].hcchar,
+				   DWC2_HCCHAR_CHEN, false, 1000, false);
 		if (ret)
 			printf("%s: Timeout!\n", __func__);
 	}
@@ -745,7 +729,8 @@ int wait_for_chhltd(struct dwc2_hc_regs *hc_regs, uint32_t *sub, u8 *toggle)
 	int ret;
 	uint32_t hcint, hctsiz;
 
-	ret = wait_for_bit(&hc_regs->hcint, DWC2_HCINT_CHHLTD, true);
+	ret = wait_for_bit(__func__, &hc_regs->hcint, DWC2_HCINT_CHHLTD, true,
+			   1000, false);
 	if (ret)
 		return ret;
 
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 2666351..e1c67f7 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -8,6 +8,7 @@
 #include <common.h>
 #include <usb.h>
 #include <errno.h>
+#include <wait_bit.h>
 #include <linux/compiler.h>
 #include <usb/ehci-fsl.h>
 #include <asm/io.h>
@@ -117,32 +118,6 @@ static void usb_power_config(int index)
 		     pll_480_ctrl_set);
 }
 
-static int wait_for_bit(u32 *reg, const u32 mask, bool set)
-{
-	u32 val;
-	const unsigned int timeout = 10000;
-	unsigned long start = get_timer(0);
-
-	while(1) {
-		val = readl(reg);
-		if (!set)
-			val = ~val;
-
-		if ((val & mask) == mask)
-			return 0;
-
-		if (get_timer(start) > timeout)
-			break;
-
-		udelay(1);
-	}
-
-	debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
-			__func__, reg, mask, set);
-
-	return -ETIMEDOUT;
-}
-
 /* Return 0 : host node, <>0 : device mode */
 static int usb_phy_enable(int index, struct usb_ehci *ehci)
 {
@@ -160,12 +135,13 @@ static int usb_phy_enable(int index, struct usb_ehci *ehci)
 
 	/* Stop then Reset */
 	clrbits_le32(usb_cmd, UCMD_RUN_STOP);
-	ret = wait_for_bit(usb_cmd, UCMD_RUN_STOP, 0);
+	ret = wait_for_bit(__func__, usb_cmd, UCMD_RUN_STOP, false, 10000,
+			   false);
 	if (ret)
 		return ret;
 
 	setbits_le32(usb_cmd, UCMD_RESET);
-	ret = wait_for_bit(usb_cmd, UCMD_RESET, 0);
+	ret = wait_for_bit(__func__, usb_cmd, UCMD_RESET, false, 10000, false);
 	if (ret)
 		return ret;
 
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index cda1c6d..f21a1fa 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -137,11 +137,17 @@ static int ehci_pci_remove(struct udevice *dev)
 	return 0;
 }
 
+static const struct udevice_id ehci_pci_ids[] = {
+	{ .compatible = "ehci-pci" },
+	{ }
+};
+
 U_BOOT_DRIVER(ehci_pci) = {
 	.name	= "ehci_pci",
 	.id	= UCLASS_USB,
 	.probe = ehci_pci_probe,
 	.remove = ehci_pci_remove,
+	.of_match = ehci_pci_ids,
 	.ops	= &ehci_usb_ops,
 	.platdata_auto_alloc_size = sizeof(struct usb_platdata),
 	.priv_auto_alloc_size = sizeof(struct ehci_pci_priv),
diff --git a/drivers/usb/host/ohci-lpc32xx.c b/drivers/usb/host/ohci-lpc32xx.c
index 48d338e..9245126 100644
--- a/drivers/usb/host/ohci-lpc32xx.c
+++ b/drivers/usb/host/ohci-lpc32xx.c
@@ -10,6 +10,7 @@
 
 #include <common.h>
 #include <errno.h>
+#include <wait_bit.h>
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/clk.h>
@@ -80,30 +81,6 @@ struct otg_regs {
 static struct otg_regs *otg = (struct otg_regs *)USB_BASE;
 static struct clk_pm_regs *clk_pwr = (struct clk_pm_regs *)CLK_PM_BASE;
 
-static int wait_for_bit(void *reg, const u32 mask, bool set)
-{
-	u32 val;
-	unsigned long start = get_timer(0);
-
-	while (1) {
-		val = readl(reg);
-		if (!set)
-			val = ~val;
-
-		if ((val & mask) == mask)
-			return 0;
-
-		if (get_timer(start) > CONFIG_SYS_HZ)
-			break;
-
-		udelay(1);
-	}
-
-	error("Timeout (reg=%p mask=%08x wait_set=%i)\n", reg, mask, set);
-
-	return -ETIMEDOUT;
-}
-
 static int isp1301_set_value(int reg, u8 value)
 {
 	return i2c_write(ISP1301_I2C_ADDR, reg, 1, &value, 1);
@@ -158,7 +135,8 @@ static int usbpll_setup(void)
 	setbits_le32(&clk_pwr->usb_ctrl, CLK_USBCTRL_POSTDIV_2POW(0x01));
 	setbits_le32(&clk_pwr->usb_ctrl, CLK_USBCTRL_PLL_PWRUP);
 
-	ret = wait_for_bit(&clk_pwr->usb_ctrl, CLK_USBCTRL_PLL_STS, 1);
+	ret = wait_for_bit(__func__, &clk_pwr->usb_ctrl, CLK_USBCTRL_PLL_STS,
+			   true, CONFIG_SYS_HZ, false);
 	if (ret)
 		return ret;
 
@@ -183,7 +161,8 @@ int usb_cpu_init(void)
 
 	/* enable I2C clock */
 	writel(OTG_CLK_I2C_EN, &otg->otg_clk_ctrl);
-	ret = wait_for_bit(&otg->otg_clk_sts, OTG_CLK_I2C_EN, 1);
+	ret = wait_for_bit(__func__, &otg->otg_clk_sts, OTG_CLK_I2C_EN, true,
+			   CONFIG_SYS_HZ, false);
 	if (ret)
 		return ret;
 
@@ -203,7 +182,8 @@ int usb_cpu_init(void)
 			 OTG_CLK_I2C_EN | OTG_CLK_HOST_EN;
 	writel(mask, &otg->otg_clk_ctrl);
 
-	ret = wait_for_bit(&otg->otg_clk_sts, mask, 1);
+	ret = wait_for_bit(__func__, &otg->otg_clk_sts, mask, true,
+			   CONFIG_SYS_HZ, false);
 	if (ret)
 		return ret;
 
diff --git a/dts/Makefile b/dts/Makefile
index dbde703..c4ac153 100644
--- a/dts/Makefile
+++ b/dts/Makefile
@@ -45,4 +45,4 @@ dtbs: $(obj)/dt.dtb
 clean-files := dt.dtb.S
 
 # Let clean descend into dts directories
-subdir- += ../arch/*/dts
+subdir- += ../arch/arm/dts ../arch/microblaze/dts ../arch/mips/dts ../arch/sandbox/dts ../arch/x86/dts
diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c
index d0fcd83..176125e 100644
--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -26,6 +26,7 @@
 #include <linux/err.h>
 #endif
 #include "ubifs.h"
+#include <linux/bug.h>
 #include <linux/list_sort.h>
 
 /**
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index abe861a..dcf3a47 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -31,6 +31,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <memalign.h>
+#include <linux/bug.h>
 #include <linux/log2.h>
 #include <linux/stat.h>
 #include <linux/err.h>
diff --git a/include/bios_emul.h b/include/bios_emul.h
index 80979ed..7571263 100644
--- a/include/bios_emul.h
+++ b/include/bios_emul.h
@@ -31,7 +31,11 @@ typedef struct {
 	int bus;
 	u32 VendorID;
 	u32 DeviceID;
+#ifdef CONFIG_DM_PCI
+	struct udevice *pcidev;
+#else
 	pci_dev_t pcidev;
+#endif
 	void *BIOSImage;
 	u32 BIOSImageLen;
 	u8 LowMem[1536];
@@ -39,7 +43,12 @@ typedef struct {
 
 struct vbe_mode_info;
 
-int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int cleanUp);
+#ifdef CONFIG_DM_PCI
+int BootVideoCardBIOS(struct udevice *pcidev, BE_VGAInfo **pVGAInfo,
+		      int clean_up);
+#else
+int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int clean_up);
+#endif
 
 /* Run a BIOS ROM natively (only supported on x86 machines) */
 void bios_run_on_x86(struct udevice *dev, unsigned long addr, int vesa_mode,
@@ -57,10 +66,18 @@ void bios_set_interrupt_handler(int intnum, int (*int_handler_func)(void));
 
 void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void));
 
+#ifdef CONFIG_DM_PCI
+int biosemu_setup(struct udevice *pcidev, BE_VGAInfo **pVGAInfo);
+
+int biosemu_run(struct udevice *dev, uchar *bios_rom, int bios_len,
+		BE_VGAInfo *vga_info, int clean_up, int vesa_mode,
+		struct vbe_mode_info *mode_info);
+#else
 int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo);
 
 int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
 		BE_VGAInfo *vga_info, int clean_up, int vesa_mode,
 		struct vbe_mode_info *mode_info);
+#endif
 
 #endif
diff --git a/include/common.h b/include/common.h
index 7bed0cc..1563d64 100644
--- a/include/common.h
+++ b/include/common.h
@@ -146,9 +146,6 @@ void __assert_fail(const char *assertion, const char *file, unsigned line,
 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
 #endif /* BUG */
 
-/* Force a compilation error if condition is true */
-#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
-
 typedef void (interrupt_handler_t)(void *);
 
 #include <asm/u-boot.h> /* boot information for Linux kernel */
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 73279c8..4a17f41 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -606,6 +606,16 @@ unsigned long get_board_ddr_clk(void);
 #define I2C_VOL_MONITOR_BUS_V_OVF	0x1
 #define I2C_VOL_MONITOR_BUS_V_SHIFT	3
 
+#define CONFIG_VID_FLS_ENV		"t4240rdb_vdd_mv"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_VID
+#endif
+#define CONFIG_VOL_MONITOR_IR36021_SET
+#define CONFIG_VOL_MONITOR_IR36021_READ
+/* The lowest and highest voltage allowed for T4240RDB */
+#define VDD_MV_MIN			819
+#define VDD_MV_MAX			1212
+
 /*
  * eSPI - Enhanced SPI
  */
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index 43ce7fe..68d3fd7 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -34,6 +34,7 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
 
 /* NAND support */
 #if defined(CONFIG_SPL_NAND_SUPPORT)
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index 174ea08..179b4f9 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -25,6 +25,8 @@
 
 #define CONFIG_SYS_NO_FLASH
 
+#define CONFIG_SYS_BOOTM_LEN	0x1000000
+
 #include <linux/sizes.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/imx-common/gpio.h>
diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
index c946176..4374c3a 100644
--- a/include/configs/mx6ul_14x14_evk.h
+++ b/include/configs/mx6ul_14x14_evk.h
@@ -156,7 +156,7 @@
 /* Miscellaneous configurable options */
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x10000000)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x8000000)
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
@@ -203,6 +203,7 @@
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED	40000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#define CONFIG_SPI_FLASH_STMICRO
 #define FSL_QSPI_FLASH_NUM		1
 #define FSL_QSPI_FLASH_SIZE		SZ_32M
 #endif
diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
index d507fb4..fac7c3f 100644
--- a/include/configs/mx7_common.h
+++ b/include/configs/mx7_common.h
@@ -23,6 +23,8 @@
 #define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */
 #define CONFIG_SYS_FSL_CLK
 
+#define CONFIG_SYS_BOOTM_LEN	0x1000000
+
 /* Enable iomux-lpsr support */
 #define CONFIG_IOMUX_LPSR
 #define CONFIG_IMX_FIXED_IVT_OFFSET
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 22e515c..d23e4f3 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -179,8 +179,33 @@
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_SIZE			SZ_8K
 #define CONFIG_ENV_IS_IN_MMC
+
+/*
+ * If want to use nand, define CONFIG_NAND_MXS and rework board
+ * to support nand, since emmc has pin conflicts with nand
+ */
+#ifdef CONFIG_NAND_MXS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+
+/* NAND stuff */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* DMA stuff, needed for GPMI/MXS NAND support */
+#define CONFIG_APBH_DMA
+#define CONFIG_APBH_DMA_BURST
+#define CONFIG_APBH_DMA_BURST8
+#endif
+
 #define CONFIG_ENV_OFFSET		(8 * SZ_64K)
+#ifdef CONFIG_NAND_MXS
+#define CONFIG_SYS_FSL_USDHC_NUM	1
+#else
 #define CONFIG_SYS_FSL_USDHC_NUM	2
+#endif
 
 #define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
 #define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 5da6cfd..5e33845 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -19,8 +19,6 @@
 #include <configs/ti_omap3_common.h>
 #include <asm/mach-types.h>
 
-#undef CONFIG_BOOTDELAY
-
 /*
  * Display CPU and Board information
  */
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 7b60f29..e9ce3f6 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -50,6 +50,9 @@
  * Hardware drivers
  */
 
+/* GPIO banks */
+#define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
+
 /*
  * select serial console configuration
  */
diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h
index 4258dcb..b0d2ffe 100644
--- a/include/configs/qemu-x86.h
+++ b/include/configs/qemu-x86.h
@@ -14,7 +14,6 @@
 #include <configs/x86-common.h>
 
 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_ARCH_EARLY_INIT_R
 
 #define CONFIG_PCI_PNP
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 8391e38..73cd3ac 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -29,6 +29,7 @@ enum uclass_id {
 	UCLASS_CLK,		/* Clock source, e.g. used by peripherals */
 	UCLASS_CPU,		/* CPU, typically part of an SoC */
 	UCLASS_CROS_EC,		/* Chrome OS EC */
+	UCLASS_DISK,		/* Disk controller, e.g. SATA */
 	UCLASS_DISPLAY,		/* Display (e.g. DisplayPort, HDMI) */
 	UCLASS_RAM,		/* RAM controller */
 	UCLASS_ETH,		/* Ethernet device */
@@ -37,6 +38,7 @@ enum uclass_id {
 	UCLASS_I2C_EEPROM,	/* I2C EEPROM device */
 	UCLASS_I2C_GENERIC,	/* Generic I2C device */
 	UCLASS_I2C_MUX,		/* I2C multiplexer */
+	UCLASS_IRQ,		/* Interrupt controller */
 	UCLASS_KEYBOARD,	/* Keyboard input device */
 	UCLASS_LED,		/* Light-emitting diode (LED) */
 	UCLASS_LPC,		/* x86 'low pin count' interface */
@@ -45,6 +47,7 @@ enum uclass_id {
 	UCLASS_MMC,		/* SD / MMC card or chip */
 	UCLASS_MOD_EXP,		/* RSA Mod Exp device */
 	UCLASS_MTD,		/* Memory Technology Device (MTD) device */
+	UCLASS_NORTHBRIDGE,	/* Intel Northbridge / SDRAM controller */
 	UCLASS_PANEL,		/* Display panel, such as an LCD */
 	UCLASS_PANEL_BACKLIGHT,	/* Backlight controller for panel */
 	UCLASS_PCH,		/* x86 platform controller hub */
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 25e98c9..dd82916 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -163,7 +163,6 @@ enum fdt_compat_id {
 	COMPAT_INTEL_X86_PINCTRL,	/* Intel ICH7/9 pin control */
 	COMPAT_SOCIONEXT_XHCI,		/* Socionext UniPhier xHCI */
 	COMPAT_INTEL_PCH,		/* Intel PCH */
-	COMPAT_INTEL_IRQ_ROUTER,	/* Intel Interrupt Router */
 	COMPAT_ALTERA_SOCFPGA_DWMAC,	/* SoCFPGA Ethernet controller */
 	COMPAT_ALTERA_SOCFPGA_DWMMC,	/* SoCFPGA DWMMC controller */
 	COMPAT_ALTERA_SOCFPGA_DWC2USB,	/* SoCFPGA DWC2 USB controller */
diff --git a/include/linux/bug.h b/include/linux/bug.h
new file mode 100644
index 0000000..920e379
--- /dev/null
+++ b/include/linux/bug.h
@@ -0,0 +1,55 @@
+#ifndef _LINUX_BUG_H
+#define _LINUX_BUG_H
+
+#include <linux/compiler.h>
+
+#ifdef __CHECKER__
+#define BUILD_BUG_ON_NOT_POWER_OF_2(n) (0)
+#define BUILD_BUG_ON_ZERO(e) (0)
+#define BUILD_BUG_ON_NULL(e) ((void*)0)
+#define BUILD_BUG_ON_INVALID(e) (0)
+#define BUILD_BUG_ON(condition) (0)
+#define BUILD_BUG() (0)
+#else /* __CHECKER__ */
+
+/* Force a compilation error if a constant expression is not a power of 2 */
+#define BUILD_BUG_ON_NOT_POWER_OF_2(n)			\
+	BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0))
+
+/* Force a compilation error if condition is true, but also produce a
+   result (of value 0 and type size_t), so the expression can be used
+   e.g. in a structure initializer (or where-ever else comma expressions
+   aren't permitted). */
+#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
+#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); }))
+
+/*
+ * BUILD_BUG_ON_INVALID() permits the compiler to check the validity of the
+ * expression but avoids the generation of any code, even if that expression
+ * has side-effects.
+ */
+#define BUILD_BUG_ON_INVALID(e) ((void)(sizeof((__force long)(e))))
+
+/**
+ * BUILD_BUG_ON - break compile if a condition is true.
+ * @condition: the condition which the compiler should know is false.
+ *
+ * If you have some code which relies on certain constants being equal, or
+ * some other compile-time-evaluated condition, you should use BUILD_BUG_ON to
+ * detect if someone changes it.
+ *
+ * The implementation uses gcc's reluctance to create a negative array, but gcc
+ * (as of 4.4) only emits that error for obvious cases (e.g. not arguments to
+ * inline functions).  Luckily, in 4.3 they added the "error" function
+ * attribute just for this type of case.  Thus, we use a negative sized array
+ * (should always create an error on gcc versions older than 4.4) and then call
+ * an undefined function with the error attribute (should always create an
+ * error on gcc 4.3 and later).  If for some reason, neither creates a
+ * compile-time error, we'll still have a link-time error, which is harder to
+ * track down.
+ */
+#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
+
+#endif	/* __CHECKER__ */
+
+#endif	/* _LINUX_BUG_H */
diff --git a/include/part.h b/include/part.h
index 4d00e22..dc23949 100644
--- a/include/part.h
+++ b/include/part.h
@@ -10,8 +10,6 @@
 #include <ide.h>
 #include <common.h>
 
-typedef struct block_dev_desc block_dev_desc_t;
-
 struct block_dev_desc {
 	int		if_type;	/* type of the interface */
 	int		dev;		/* device number */
diff --git a/include/pch.h b/include/pch.h
new file mode 100644
index 0000000..79f49bd
--- /dev/null
+++ b/include/pch.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __pch_h
+#define __pch_h
+
+enum pch_version {
+	PCHV_UNKNOWN,
+	PCHV_7,
+	PCHV_9,
+};
+
+#define PCH_RCBA		0xf0
+
+#define BIOS_CTRL_BIOSWE	BIT(0)
+
+/* Operations for the Platform Controller Hub */
+struct pch_ops {
+	/**
+	 * get_sbase() - get the address of SPI base
+	 *
+	 * @dev:	PCH device to check
+	 * @sbasep:	Returns address of SPI base if available, else 0
+	 * @return 0 if OK, -ve on error (e.g. there is no SPI base)
+	 */
+	int (*get_sbase)(struct udevice *dev, ulong *sbasep);
+
+	/**
+	 * get_version() - get the PCH version
+	 *
+	 * @return version, or -ENOSYS if unknown
+	 */
+	enum pch_version (*get_version)(struct udevice *dev);
+
+	/**
+	 * set_spi_protect() - set whether SPI flash is protected or not
+	 *
+	 * @dev:	PCH device to adjust
+	 * @protect:	true to protect, false to unprotect
+	 *
+	 * @return 0 on success, -ENOSYS if not implemented
+	 */
+	int (*set_spi_protect)(struct udevice *dev, bool protect);
+};
+
+#define pch_get_ops(dev)        ((struct pch_ops *)(dev)->driver->ops)
+
+/**
+ * pch_get_sbase() - get the address of SPI base
+ *
+ * @dev:	PCH device to check
+ * @sbasep:	Returns address of SPI base if available, else 0
+ * @return 0 if OK, -ve on error (e.g. there is no SPI base)
+ */
+int pch_get_sbase(struct udevice *dev, ulong *sbasep);
+
+/**
+ * pch_get_version() - get the PCH version
+ *
+ * @return version, or -ENOSYS if unknown
+ */
+enum pch_version pch_get_version(struct udevice *dev);
+
+/**
+ * set_spi_protect() - set whether SPI flash is protected or not
+ *
+ * @dev:	PCH device to adjust
+ * @protect:	true to protect, false to unprotect
+ *
+ * @return 0 on success, -ENOSYS if not implemented
+ */
+int pch_set_spi_protect(struct udevice *dev, bool protect);
+
+#endif
diff --git a/include/pci.h b/include/pci.h
index cb2562f..d0d152c 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -757,7 +757,9 @@ extern void pci_mpc85xx_init (struct pci_controller *hose);
 /**
  * pci_write_bar32() - Write the address of a BAR including control bits
  *
- * This writes a raw address (with control bits) to a bar
+ * This writes a raw address (with control bits) to a bar. This can be used
+ * with devices which require hard-coded addresses, not part of the normal
+ * PCI enumeration process.
  *
  * @hose:	PCI hose to use
  * @dev:	PCI device to update
@@ -765,7 +767,7 @@ extern void pci_mpc85xx_init (struct pci_controller *hose);
  * @addr:	BAR address with control bits
  */
 void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum,
-		     u32 addr_and_ctrl);
+		     u32 addr);
 
 /**
  * pci_read_bar32() - read the address of a bar
@@ -1167,6 +1169,17 @@ int pci_get_regions(struct udevice *dev, struct pci_region **iop,
 		    struct pci_region **memp, struct pci_region **prefp);
 
 /**
+ * dm_pci_write_bar32() - Write the address of a BAR
+ *
+ * This writes a raw address to a bar
+ *
+ * @dev:	PCI device to update
+ * @barnum:	BAR number (0-5)
+ * @addr:	BAR address
+ */
+void dm_pci_write_bar32(struct udevice *dev, int barnum, u32 addr);
+
+/**
  * dm_pci_read_bar32() - read a base address register from a device
  *
  * @dev:	Device to check
diff --git a/include/syscon.h b/include/syscon.h
index c62ccd6..4593b6e 100644
--- a/include/syscon.h
+++ b/include/syscon.h
@@ -37,6 +37,20 @@ struct regmap *syscon_get_regmap(struct udevice *dev);
  *
  * Each system controller can be accessed by its driver data, which is
  * assumed to be unique through the scope of all system controllers that
+ * are in use. This function looks up the controller given this driver data.
+ *
+ * @driver_data:	Driver data value to look up
+ * @devp:		Returns the controller correponding to @driver_data
+ * @return 0 on success, -ENODEV if the ID was not found, or other -ve error
+ *	   code
+ */
+int syscon_get_by_driver_data(ulong driver_data, struct udevice **devp);
+
+/**
+ * syscon_get_regmap_by_driver_data() - Look up a controller by its ID
+ *
+ * Each system controller can be accessed by its driver data, which is
+ * assumed to be unique through the scope of all system controllers that
  * are in use. This function looks up the regmap given this driver data.
  *
  * @driver_data:	Driver data value to look up
diff --git a/include/wait_bit.h b/include/wait_bit.h
new file mode 100644
index 0000000..061a2db
--- /dev/null
+++ b/include/wait_bit.h
@@ -0,0 +1,71 @@
+/*
+ * Wait for bit with timeout and ctrlc
+ *
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __WAIT_BIT_H
+#define __WAIT_BIT_H
+
+#include <common.h>
+#include <console.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+
+/**
+ * wait_for_bit()	waits for bit set/cleared in register
+ *
+ * Function polls register waiting for specific bit(s) change
+ * (either 0->1 or 1->0). It can fail under two conditions:
+ * - Timeout
+ * - User interaction (CTRL-C)
+ * Function succeeds only if all bits of masked register are set/cleared
+ * (depending on set option).
+ *
+ * @param prefix	Prefix added to timeout messagge (message visible only
+ *			with debug enabled)
+ * @param reg		Register that will be read (using readl())
+ * @param mask		Bit(s) of register that must be active
+ * @param set		Selects wait condition (bit set or clear)
+ * @param timeout_ms	Timeout (in miliseconds)
+ * @param breakable	Enables CTRL-C interruption
+ * @return		0 on success, -ETIMEDOUT or -EINTR on failure
+ */
+static inline int wait_for_bit(const char *prefix, const u32 *reg,
+			       const u32 mask, const bool set,
+			       const unsigned int timeout_ms,
+			       const bool breakable)
+{
+	u32 val;
+	unsigned long start = get_timer(0);
+
+	while (1) {
+		val = readl(reg);
+
+		if (!set)
+			val = ~val;
+
+		if ((val & mask) == mask)
+			return 0;
+
+		if (get_timer(start) > timeout_ms)
+			break;
+
+		if (breakable && ctrlc()) {
+			puts("Abort\n");
+			return -EINTR;
+		}
+
+		udelay(1);
+	}
+
+	debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n", prefix, reg, mask,
+	      set);
+
+	return -ETIMEDOUT;
+}
+
+
+#endif
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index d56e1b1..0eb56af 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -68,7 +68,6 @@ static const char * const compat_names[COMPAT_COUNT] = {
 	COMPAT(INTEL_X86_PINCTRL, "intel,x86-pinctrl"),
 	COMPAT(SOCIONEXT_XHCI, "socionext,uniphier-xhci"),
 	COMPAT(COMPAT_INTEL_PCH, "intel,bd82x6x"),
-	COMPAT(COMPAT_INTEL_IRQ_ROUTER, "intel,irq-router"),
 	COMPAT(ALTERA_SOCFPGA_DWMAC, "altr,socfpga-stmmac"),
 	COMPAT(ALTERA_SOCFPGA_DWMMC, "altr,socfpga-dw-mshc"),
 	COMPAT(ALTERA_SOCFPGA_DWC2USB, "snps,dwc2"),
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 98e09ce..30e6e31 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -130,6 +130,10 @@ cc-option-align = $(subst -functions=0,,\
 cc-disable-warning = $(call try-run,\
 	$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))
 
+# cc-name
+# Expands to either gcc or clang
+cc-name = $(shell $(CC) -v 2>&1 | grep -q "clang version" && echo clang || echo gcc)
+
 # cc-version
 cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC))
 
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 96f414a..dff16b9 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -53,7 +53,7 @@ libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
 
 libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
 libs-y += common/init/
-libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
+libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/
 libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
 libs-y += drivers/
 libs-y += dts/
diff --git a/test/dm/syscon.c b/test/dm/syscon.c
index 3642481..c40f5fc 100644
--- a/test/dm/syscon.c
+++ b/test/dm/syscon.c
@@ -29,3 +29,20 @@ static int dm_test_syscon_base(struct unit_test_state *uts)
 	return 0;
 }
 DM_TEST(dm_test_syscon_base, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+/* Test system controller finding */
+static int dm_test_syscon_by_driver_data(struct unit_test_state *uts)
+{
+	struct udevice *dev;
+
+	ut_assertok(syscon_get_by_driver_data(SYSCON0, &dev));
+	ut_asserteq(SYSCON0, dev->driver_data);
+
+	ut_assertok(syscon_get_by_driver_data(SYSCON1, &dev));
+	ut_asserteq(SYSCON1, dev->driver_data);
+
+	ut_asserteq(-ENODEV, syscon_get_by_driver_data(2, &dev));
+
+	return 0;
+}
+DM_TEST(dm_test_syscon_by_driver_data, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);