diff options
-rw-r--r-- | board/freescale/ls1021atwr/ls1021atwr.c | 68 | ||||
-rw-r--r-- | include/configs/ls1021atwr.h | 11 |
2 files changed, 75 insertions, 4 deletions
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 8fef8e9..d62323e 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -22,6 +22,7 @@ #include <tsec.h> #include <fsl_sec.h> #include <spl.h> +#include "../common/sleep.h" #ifdef CONFIG_U_QE #include "../../../drivers/qe/qe.h" #endif @@ -148,6 +149,7 @@ unsigned int get_soc_major_rev(void) void ddrmc_init(void) { struct ccsr_ddr *ddr = (struct ccsr_ddr *)CONFIG_SYS_FSL_DDR_ADDR; + u32 temp_sdram_cfg; out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG); @@ -161,7 +163,22 @@ void ddrmc_init(void) out_be32(&ddr->timing_cfg_4, DDR_TIMING_CFG_4); out_be32(&ddr->timing_cfg_5, DDR_TIMING_CFG_5); - out_be32(&ddr->sdram_cfg_2, DDR_SDRAM_CFG_2); +#ifdef CONFIG_DEEP_SLEEP + if (is_warm_boot()) { + out_be32(&ddr->sdram_cfg_2, + DDR_SDRAM_CFG_2 & ~SDRAM_CFG2_D_INIT); + out_be32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE); + out_be32(&ddr->init_ext_addr, (1 << 31)); + + /* DRAM VRef will not be trained */ + out_be32(&ddr->ddr_cdr2, + DDR_DDR_CDR2 & ~DDR_CDR2_VREF_TRAIN_EN); + } else +#endif + { + out_be32(&ddr->sdram_cfg_2, DDR_SDRAM_CFG_2); + out_be32(&ddr->ddr_cdr2, DDR_DDR_CDR2); + } out_be32(&ddr->sdram_mode, DDR_SDRAM_MODE); out_be32(&ddr->sdram_mode_2, DDR_SDRAM_MODE_2); @@ -174,14 +191,35 @@ void ddrmc_init(void) out_be32(&ddr->ddr_wrlvl_cntl_3, DDR_DDR_WRLVL_CNTL_3); out_be32(&ddr->ddr_cdr1, DDR_DDR_CDR1); - out_be32(&ddr->ddr_cdr2, DDR_DDR_CDR2); out_be32(&ddr->sdram_clk_cntl, DDR_SDRAM_CLK_CNTL); out_be32(&ddr->ddr_zq_cntl, DDR_DDR_ZQ_CNTL); out_be32(&ddr->cs0_config_2, DDR_CS0_CONFIG_2); udelay(1); - out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG | DDR_SDRAM_CFG_MEM_EN); + +#ifdef CONFIG_DEEP_SLEEP + if (is_warm_boot()) { + /* enter self-refresh */ + temp_sdram_cfg = in_be32(&ddr->sdram_cfg_2); + temp_sdram_cfg |= SDRAM_CFG2_FRC_SR; + out_be32(&ddr->sdram_cfg_2, temp_sdram_cfg); + + temp_sdram_cfg = (DDR_SDRAM_CFG_MEM_EN | SDRAM_CFG_BI); + } else +#endif + temp_sdram_cfg = (DDR_SDRAM_CFG_MEM_EN & ~SDRAM_CFG_BI); + + out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG | temp_sdram_cfg); + +#ifdef CONFIG_DEEP_SLEEP + if (is_warm_boot()) { + /* exit self-refresh */ + temp_sdram_cfg = in_be32(&ddr->sdram_cfg_2); + temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR; + out_be32(&ddr->sdram_cfg_2, temp_sdram_cfg); + } +#endif } int dram_init(void) @@ -191,6 +229,11 @@ int dram_init(void) #endif gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + +#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) + fsl_dp_resume(); +#endif + return 0; } @@ -388,6 +431,11 @@ int board_early_init_f(void) out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE); } +#if defined(CONFIG_DEEP_SLEEP) + if (is_warm_boot()) + fsl_dp_disable_console(); +#endif + return 0; } @@ -399,6 +447,11 @@ void board_init_f(ulong dummy) get_clocks(); +#if defined(CONFIG_DEEP_SLEEP) + if (is_warm_boot()) + fsl_dp_disable_console(); +#endif + preloader_console_init(); dram_init(); @@ -567,6 +620,15 @@ int misc_init_r(void) } #endif +#if defined(CONFIG_DEEP_SLEEP) +void board_sleep_prepare(void) +{ +#ifdef CONFIG_LS102XA_NS_ACCESS + enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev)); +#endif +} +#endif + int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index a277a2d..df7af3c 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -18,6 +18,10 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DEEP_SLEEP +#ifdef CONFIG_DEEP_SLEEP +#define CONFIG_SILENT_CONSOLE +#endif /* * Size of malloc() pool @@ -95,6 +99,10 @@ #define DDR_DDR_ZQ_CNTL 0x89080600 #define DDR_CS0_CONFIG_2 0 #define DDR_SDRAM_CFG_MEM_EN 0x80000000 +#define SDRAM_CFG2_D_INIT 0x00000010 +#define DDR_CDR2_VREF_TRAIN_EN 0x00000080 +#define SDRAM_CFG2_FRC_SR 0x80000000 +#define SDRAM_CFG_BI 0x00000001 #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg @@ -121,7 +129,8 @@ #define CONFIG_SPL_PAD_TO 0x1c000 #define CONFIG_SYS_TEXT_BASE 0x82000000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ + CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 |