summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--README8
-rw-r--r--arch/arm/include/asm/arch-exynos/cpu.h1
-rw-r--r--board/samsung/universal_c210/universal.c48
-rw-r--r--common/cmd_usb.c3
-rw-r--r--common/usb.c27
-rw-r--r--drivers/serial/usbtty.c10
-rw-r--r--drivers/usb/gadget/epautoconf.c8
-rw-r--r--drivers/usb/gadget/s3c_udc_otg.c10
-rw-r--r--drivers/usb/ulpi/ulpi-viewport.c4
-rw-r--r--drivers/usb/ulpi/ulpi.c30
-rw-r--r--include/configs/s5pc210_universal.h4
-rw-r--r--include/max8998_pmic.h1
-rw-r--r--include/usb/ulpi.h8
-rw-r--r--include/usbdescriptors.h2
14 files changed, 122 insertions, 42 deletions
diff --git a/README b/README
index ff72e47..6fe1e0f 100644
--- a/README
+++ b/README
@@ -1185,6 +1185,14 @@ The following options need to be configured:
for your device
- CONFIG_USBD_PRODUCTID 0xFFFF
+- ULPI Layer Support:
+ The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via
+ the generic ULPI layer. The generic layer accesses the ULPI PHY
+ via the platform viewport, so you need both the genric layer and
+ the viewport enabled. Currently only Chipidea/ARC based
+ viewport is supported.
+ To enable the ULPI layer support, define CONFIG_USB_ULPI and
+ CONFIG_USB_ULPI_VIEWPORT in your board configuration file.
- MMC Support:
The MMC controller on the Intel PXA is supported. To
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index 4464d27..6d97b99 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -46,6 +46,7 @@
#define EXYNOS4_ADC_BASE 0x13910000
#define EXYNOS4_PWMTIMER_BASE 0x139D0000
#define EXYNOS4_MODEM_BASE 0x13A00000
+#define EXYNOS4_USBPHY_CONTROL 0x10020704
#ifndef __ASSEMBLY__
#include <asm/io.h>
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index f9b8a76..8393e4f 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -28,6 +28,9 @@
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <pmic.h>
+#include <usb/s3c_udc.h>
+#include <asm/arch/cpu.h>
+#include <max8998_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -253,3 +256,48 @@ int board_mmc_init(bd_t *bis)
}
#endif
+
+#ifdef CONFIG_USB_GADGET
+static int s5pc210_phy_control(int on)
+{
+ int ret;
+ struct pmic *p = get_pmic();
+
+ if (pmic_probe(p))
+ return -1;
+
+ if (on) {
+ ret |= pmic_set_output(p,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+ MAX8998_SAFEOUT1, LDO_ON);
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
+ MAX8998_LDO3, LDO_ON);
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
+ MAX8998_LDO8, LDO_ON);
+
+ } else {
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
+ MAX8998_LDO8, LDO_OFF);
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
+ MAX8998_LDO3, LDO_OFF);
+ ret |= pmic_set_output(p,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+ MAX8998_SAFEOUT1, LDO_OFF);
+ }
+
+ if (ret) {
+ puts("MAX8998 LDO setting error!\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+struct s3c_plat_otg_data s5pc210_otg_data = {
+ .phy_control = s5pc210_phy_control,
+ .regs_phy = EXYNOS4_USBPHY_BASE,
+ .regs_otg = EXYNOS4_USBOTG_BASE,
+ .usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL,
+ .usb_flags = PHY0_SLEEP,
+};
+#endif
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index d4ec2a2..320667f 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -28,6 +28,7 @@
#include <common.h>
#include <command.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
#include <part.h>
#include <usb.h>
@@ -240,7 +241,7 @@ void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc)
printf("Interrupt");
break;
}
- printf(" MaxPacket %d", epdesc->wMaxPacketSize);
+ printf(" MaxPacket %d", get_unaligned(&epdesc->wMaxPacketSize));
if ((epdesc->bmAttributes & 0x03) == 0x3)
printf(" Interval %dms", epdesc->bInterval);
printf("\n");
diff --git a/common/usb.c b/common/usb.c
index 4418c70..63a11c8 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -49,6 +49,7 @@
#include <asm/processor.h>
#include <linux/ctype.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
#include <usb.h>
#ifdef CONFIG_4xx
@@ -279,30 +280,32 @@ usb_set_maxpacket_ep(struct usb_device *dev, int if_idx, int ep_idx)
{
int b;
struct usb_endpoint_descriptor *ep;
+ u16 ep_wMaxPacketSize;
ep = &dev->config.if_desc[if_idx].ep_desc[ep_idx];
b = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+ ep_wMaxPacketSize = get_unaligned(&ep->wMaxPacketSize);
if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
USB_ENDPOINT_XFER_CONTROL) {
/* Control => bidirectional */
- dev->epmaxpacketout[b] = ep->wMaxPacketSize;
- dev->epmaxpacketin[b] = ep->wMaxPacketSize;
+ dev->epmaxpacketout[b] = ep_wMaxPacketSize;
+ dev->epmaxpacketin[b] = ep_wMaxPacketSize;
USB_PRINTF("##Control EP epmaxpacketout/in[%d] = %d\n",
b, dev->epmaxpacketin[b]);
} else {
if ((ep->bEndpointAddress & 0x80) == 0) {
/* OUT Endpoint */
- if (ep->wMaxPacketSize > dev->epmaxpacketout[b]) {
- dev->epmaxpacketout[b] = ep->wMaxPacketSize;
+ if (ep_wMaxPacketSize > dev->epmaxpacketout[b]) {
+ dev->epmaxpacketout[b] = ep_wMaxPacketSize;
USB_PRINTF("##EP epmaxpacketout[%d] = %d\n",
b, dev->epmaxpacketout[b]);
}
} else {
/* IN Endpoint */
- if (ep->wMaxPacketSize > dev->epmaxpacketin[b]) {
- dev->epmaxpacketin[b] = ep->wMaxPacketSize;
+ if (ep_wMaxPacketSize > dev->epmaxpacketin[b]) {
+ dev->epmaxpacketin[b] = ep_wMaxPacketSize;
USB_PRINTF("##EP epmaxpacketin[%d] = %d\n",
b, dev->epmaxpacketin[b]);
}
@@ -333,6 +336,7 @@ int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno)
struct usb_descriptor_header *head;
int index, ifno, epno, curr_if_num;
int i;
+ u16 ep_wMaxPacketSize;
ifno = -1;
epno = -1;
@@ -378,8 +382,15 @@ int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno)
dev->config.if_desc[ifno].no_of_ep++;
memcpy(&dev->config.if_desc[ifno].ep_desc[epno],
&buffer[index], buffer[index]);
- le16_to_cpus(&(dev->config.if_desc[ifno].ep_desc[epno].\
- wMaxPacketSize));
+ ep_wMaxPacketSize = get_unaligned(&dev->config.\
+ if_desc[ifno].\
+ ep_desc[epno].\
+ wMaxPacketSize);
+ put_unaligned(le16_to_cpu(ep_wMaxPacketSize),
+ &dev->config.\
+ if_desc[ifno].\
+ ep_desc[epno].\
+ wMaxPacketSize);
USB_PRINTF("if %d, ep %d\n", ifno, epno);
break;
default:
diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c
index e2e87fe..a263b2c 100644
--- a/drivers/serial/usbtty.c
+++ b/drivers/serial/usbtty.c
@@ -25,6 +25,7 @@
#include <config.h>
#include <circbuf.h>
#include <stdio_dev.h>
+#include <asm/unaligned.h>
#include "usbtty.h"
#include "usb_cdc_acm.h"
#include "usbdescriptors.h"
@@ -626,6 +627,9 @@ static void usbtty_init_strings (void)
usb_strings = usbtty_string_table;
}
+#define init_wMaxPacketSize(x) le16_to_cpu(get_unaligned(\
+ &ep_descriptor_ptrs[(x) - 1]->wMaxPacketSize));
+
static void usbtty_init_instances (void)
{
int i;
@@ -688,14 +692,12 @@ static void usbtty_init_instances (void)
endpoint_instance[i].rcv_attributes =
ep_descriptor_ptrs[i - 1]->bmAttributes;
- endpoint_instance[i].rcv_packetSize =
- le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
+ endpoint_instance[i].rcv_packetSize = init_wMaxPacketSize(i);
endpoint_instance[i].tx_attributes =
ep_descriptor_ptrs[i - 1]->bmAttributes;
- endpoint_instance[i].tx_packetSize =
- le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
+ endpoint_instance[i].tx_packetSize = init_wMaxPacketSize(i);
endpoint_instance[i].tx_attributes =
ep_descriptor_ptrs[i - 1]->bmAttributes;
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 1896489..5b8776e 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -25,6 +25,7 @@
#include <linux/usb/ch9.h>
#include <asm/errno.h>
#include <linux/usb/gadget.h>
+#include <asm/unaligned.h>
#include "gadget_chips.h"
#define isdigit(c) ('0' <= (c) && (c) <= '9')
@@ -127,7 +128,7 @@ static int ep_matches(
* where it's an output parameter representing the full speed limit.
* the usb spec fixes high speed bulk maxpacket at 512 bytes.
*/
- max = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
+ max = 0x7ff & le16_to_cpu(get_unaligned(&desc->wMaxPacketSize));
switch (type) {
case USB_ENDPOINT_XFER_INT:
/* INT: limit 64 bytes full speed, 1024 high speed */
@@ -143,7 +144,8 @@ static int ep_matches(
return 0;
/* BOTH: "high bandwidth" works only at high speed */
- if ((desc->wMaxPacketSize & __constant_cpu_to_le16(3<<11))) {
+ if ((get_unaligned(&desc->wMaxPacketSize) &
+ __constant_cpu_to_le16(3<<11))) {
if (!gadget->is_dualspeed)
return 0;
/* configure your hardware with enough buffering!! */
@@ -176,7 +178,7 @@ static int ep_matches(
/* min() doesn't work on bitfields with gcc-3.5 */
if (size > 64)
size = 64;
- desc->wMaxPacketSize = cpu_to_le16(size);
+ put_unaligned(cpu_to_le16(size), &desc->wMaxPacketSize);
}
return 1;
}
diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c
index 5a3ac78..901fac9 100644
--- a/drivers/usb/gadget/s3c_udc_otg.c
+++ b/drivers/usb/gadget/s3c_udc_otg.c
@@ -40,6 +40,7 @@
#include <linux/usb/gadget.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
#include <asm/io.h>
#include <asm/mach-types.h>
@@ -586,7 +587,8 @@ static int s3c_ep_enable(struct usb_ep *_ep,
if (!_ep || !desc || ep->desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| ep->bEndpointAddress != desc->bEndpointAddress
- || ep_maxpacket(ep) < le16_to_cpu(desc->wMaxPacketSize)) {
+ || ep_maxpacket(ep) <
+ le16_to_cpu(get_unaligned(&desc->wMaxPacketSize))) {
DEBUG("%s: bad ep or descriptor\n", __func__);
return -EINVAL;
@@ -603,8 +605,8 @@ static int s3c_ep_enable(struct usb_ep *_ep,
/* hardware _could_ do smaller, but driver doesn't */
if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
- && le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(ep))
- || !desc->wMaxPacketSize) {
+ && le16_to_cpu(get_unaligned(&desc->wMaxPacketSize)) !=
+ ep_maxpacket(ep)) || !get_unaligned(&desc->wMaxPacketSize)) {
DEBUG("%s: bad %s maxpacket\n", __func__, _ep->name);
return -ERANGE;
@@ -620,7 +622,7 @@ static int s3c_ep_enable(struct usb_ep *_ep,
ep->stopped = 0;
ep->desc = desc;
ep->pio_irqs = 0;
- ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+ ep->ep.maxpacket = le16_to_cpu(get_unaligned(&desc->wMaxPacketSize));
/* Reset halt state */
s3c_udc_set_nak(ep);
diff --git a/drivers/usb/ulpi/ulpi-viewport.c b/drivers/usb/ulpi/ulpi-viewport.c
index fa2e004..490fb0e 100644
--- a/drivers/usb/ulpi/ulpi-viewport.c
+++ b/drivers/usb/ulpi/ulpi-viewport.c
@@ -98,7 +98,7 @@ static int ulpi_request(u32 ulpi_viewport, u32 value)
return err;
}
-u32 ulpi_write(u32 ulpi_viewport, u8 *reg, u32 value)
+int ulpi_write(u32 ulpi_viewport, u8 *reg, u32 value)
{
u32 val = ULPI_RWRUN | ULPI_RWCTRL | ((u32)reg << 16) | (value & 0xff);
@@ -107,7 +107,7 @@ u32 ulpi_write(u32 ulpi_viewport, u8 *reg, u32 value)
u32 ulpi_read(u32 ulpi_viewport, u8 *reg)
{
- u32 err;
+ int err;
u32 val = ULPI_RWRUN | ((u32)reg << 16);
err = ulpi_request(ulpi_viewport, val);
diff --git a/drivers/usb/ulpi/ulpi.c b/drivers/usb/ulpi/ulpi.c
index 805e29d..6202227 100644
--- a/drivers/usb/ulpi/ulpi.c
+++ b/drivers/usb/ulpi/ulpi.c
@@ -39,8 +39,8 @@ static struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
static int ulpi_integrity_check(u32 ulpi_viewport)
{
- u32 err, val, tval = ULPI_TEST_VALUE;
- int i;
+ u32 val, tval = ULPI_TEST_VALUE;
+ int err, i;
/* Use the 'special' test value to check all bits */
for (i = 0; i < 2; i++, tval <<= 1) {
@@ -79,9 +79,9 @@ int ulpi_init(u32 ulpi_viewport)
return ulpi_integrity_check(ulpi_viewport);
}
-int ulpi_select_transceiver(u32 ulpi_viewport, u8 speed)
+int ulpi_select_transceiver(u32 ulpi_viewport, unsigned speed)
{
- u8 tspeed = ULPI_FC_FULL_SPEED;
+ u32 tspeed = ULPI_FC_FULL_SPEED;
u32 val;
switch (speed) {
@@ -92,8 +92,8 @@ int ulpi_select_transceiver(u32 ulpi_viewport, u8 speed)
tspeed = speed;
break;
default:
- printf("ULPI: %s: wrong transceiver speed specified, "
- "falling back to full speed\n", __func__);
+ printf("ULPI: %s: wrong transceiver speed specified: %u, "
+ "falling back to full speed\n", __func__, speed);
}
val = ulpi_read(ulpi_viewport, &ulpi->function_ctrl);
@@ -127,9 +127,9 @@ int ulpi_set_pd(u32 ulpi_viewport, int enable)
return ulpi_write(ulpi_viewport, reg, val);
}
-int ulpi_opmode_sel(u32 ulpi_viewport, u8 opmode)
+int ulpi_opmode_sel(u32 ulpi_viewport, unsigned opmode)
{
- u8 topmode = ULPI_FC_OPMODE_NORMAL;
+ u32 topmode = ULPI_FC_OPMODE_NORMAL;
u32 val;
switch (opmode) {
@@ -140,8 +140,8 @@ int ulpi_opmode_sel(u32 ulpi_viewport, u8 opmode)
topmode = opmode;
break;
default:
- printf("ULPI: %s: wrong OpMode specified, "
- "falling back to OpMode Normal\n", __func__);
+ printf("ULPI: %s: wrong OpMode specified: %u, "
+ "falling back to OpMode Normal\n", __func__, opmode);
}
val = ulpi_read(ulpi_viewport, &ulpi->function_ctrl);
@@ -154,15 +154,15 @@ int ulpi_opmode_sel(u32 ulpi_viewport, u8 opmode)
return ulpi_write(ulpi_viewport, &ulpi->function_ctrl, val);
}
-int ulpi_serial_mode_enable(u32 ulpi_viewport, u8 smode)
+int ulpi_serial_mode_enable(u32 ulpi_viewport, unsigned smode)
{
switch (smode) {
case ULPI_IFACE_6_PIN_SERIAL_MODE:
case ULPI_IFACE_3_PIN_SERIAL_MODE:
break;
default:
- printf("ULPI: %s: unrecognized Serial Mode specified\n",
- __func__);
+ printf("ULPI: %s: unrecognized Serial Mode specified: %u\n",
+ __func__, smode);
return ULPI_ERROR;
}
@@ -171,7 +171,7 @@ int ulpi_serial_mode_enable(u32 ulpi_viewport, u8 smode)
int ulpi_suspend(u32 ulpi_viewport)
{
- u32 err;
+ int err;
err = ulpi_write(ulpi_viewport, &ulpi->function_ctrl_clear,
ULPI_FC_SUSPENDM);
@@ -214,7 +214,7 @@ int ulpi_reset_wait(u32) __attribute__((weak, alias("__ulpi_reset_wait")));
int ulpi_reset(u32 ulpi_viewport)
{
- u32 err;
+ int err;
err = ulpi_write(ulpi_viewport,
&ulpi->function_ctrl_set, ULPI_FC_RESET);
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index b36ad3a..be000cb 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -262,4 +262,8 @@
#define CONFIG_PMIC_I2C
#define CONFIG_PMIC_MAX8998
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DUALSPEED
+
#endif /* __CONFIG_H */
diff --git a/include/max8998_pmic.h b/include/max8998_pmic.h
index bf28820..10c892a 100644
--- a/include/max8998_pmic.h
+++ b/include/max8998_pmic.h
@@ -76,6 +76,7 @@ enum {
#define MAX8998_LDO3 (1 << 2)
#define MAX8998_LDO8 (1 << 5)
+#define MAX8998_SAFEOUT1 (1 << 4)
#define MAX8998_I2C_ADDR (0xCC >> 1)
diff --git a/include/usb/ulpi.h b/include/usb/ulpi.h
index d871290..802f077 100644
--- a/include/usb/ulpi.h
+++ b/include/usb/ulpi.h
@@ -41,7 +41,7 @@ int ulpi_init(u32 ulpi_viewport);
* ULPI_FC_LOW_SPEED, ULPI_FC_FS4LS
* returns 0 on success, ULPI_ERROR on failure.
*/
-int ulpi_select_transceiver(u32 ulpi_viewport, u8 speed);
+int ulpi_select_transceiver(u32 ulpi_viewport, unsigned speed);
/*
* Enable/disable VBUS.
@@ -66,7 +66,7 @@ int ulpi_set_pd(u32 ulpi_viewport, int enable);
*
* returns 0 on success, ULPI_ERROR on failure.
*/
-int ulpi_opmode_sel(u32 ulpi_viewport, u8 opmode);
+int ulpi_opmode_sel(u32 ulpi_viewport, unsigned opmode);
/*
* Switch to Serial Mode.
@@ -78,7 +78,7 @@ int ulpi_opmode_sel(u32 ulpi_viewport, u8 opmode);
* Switches immediately to Serial Mode.
* To return from Serial Mode, STP line needs to be asserted.
*/
-int ulpi_serial_mode_enable(u32 ulpi_viewport, u8 smode);
+int ulpi_serial_mode_enable(u32 ulpi_viewport, unsigned smode);
/*
* Put PHY into low power mode.
@@ -108,7 +108,7 @@ int ulpi_reset(u32 ulpi_viewport);
*
* returns 0 on success, ULPI_ERROR on failure.
*/
-u32 ulpi_write(u32 ulpi_viewport, u8 *reg, u32 value);
+int ulpi_write(u32 ulpi_viewport, u8 *reg, u32 value);
/*
* Read the ULPI PHY register content via the viewport.
diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h
index 392fcf5..2dec3b9 100644
--- a/include/usbdescriptors.h
+++ b/include/usbdescriptors.h
@@ -199,7 +199,7 @@ struct usb_endpoint_descriptor {
u8 bmAttributes;
u16 wMaxPacketSize;
u8 bInterval;
-} __attribute__ ((packed)) __attribute__ ((aligned(2)));
+} __attribute__ ((packed));
struct usb_interface_descriptor {
u8 bLength;
generated by cgit v1.1 at 2024-12-25 00:24:57 +0000