summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/mtd/nand/mxc_nand.c92
-rw-r--r--include/fsl_nfc.h72
-rw-r--r--nand_spl/nand_boot_fsl_nfc.c47
3 files changed, 97 insertions, 114 deletions
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index bb475f2..6ae95d6 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -119,7 +119,7 @@ static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size
/*
* This function polls the NANDFC to wait for the basic operation to
- * complete by checking the INT bit of config2 register.
+ * complete by checking the INT bit.
*/
static void wait_op_done(struct mxc_nand_host *host, int max_retries,
uint16_t param)
@@ -127,10 +127,10 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries,
uint32_t tmp;
while (max_retries-- > 0) {
- if (readw(&host->regs->config2) & NFC_INT) {
- tmp = readw(&host->regs->config2);
- tmp &= ~NFC_INT;
- writew(tmp, &host->regs->config2);
+ tmp = readnfc(&host->regs->config2);
+ if (tmp & NFC_V1_V2_CONFIG2_INT) {
+ tmp &= ~NFC_V1_V2_CONFIG2_INT;
+ writenfc(tmp, &host->regs->config2);
break;
}
udelay(1);
@@ -149,8 +149,8 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd)
{
MTDDEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd);
- writew(cmd, &host->regs->flash_cmd);
- writew(NFC_CMD, &host->regs->config2);
+ writenfc(cmd, &host->regs->flash_cmd);
+ writenfc(NFC_CMD, &host->regs->operation);
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, cmd);
@@ -165,8 +165,8 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr)
{
MTDDEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x)\n", addr);
- writew(addr, &host->regs->flash_addr);
- writew(NFC_ADDR, &host->regs->config2);
+ writenfc(addr, &host->regs->flash_addr);
+ writenfc(NFC_ADDR, &host->regs->operation);
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, addr);
@@ -198,19 +198,19 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
}
}
- writew(buf_id, &host->regs->buf_addr);
+ writenfc(buf_id, &host->regs->buf_addr);
/* Configure spare or page+spare access */
if (!host->pagesize_2k) {
- uint16_t config1 = readw(&host->regs->config1);
+ uint16_t config1 = readnfc(&host->regs->config1);
if (spare_only)
- config1 |= NFC_SP_EN;
+ config1 |= NFC_CONFIG1_SP_EN;
else
- config1 &= ~NFC_SP_EN;
- writew(config1, &host->regs->config1);
+ config1 &= ~NFC_CONFIG1_SP_EN;
+ writenfc(config1, &host->regs->config1);
}
- writew(NFC_INPUT, &host->regs->config2);
+ writenfc(NFC_INPUT, &host->regs->operation);
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, spare_only);
@@ -225,19 +225,19 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
{
MTDDEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
- writew(buf_id, &host->regs->buf_addr);
+ writenfc(buf_id, &host->regs->buf_addr);
/* Configure spare or page+spare access */
if (!host->pagesize_2k) {
- uint32_t config1 = readw(&host->regs->config1);
+ uint32_t config1 = readnfc(&host->regs->config1);
if (spare_only)
- config1 |= NFC_SP_EN;
+ config1 |= NFC_CONFIG1_SP_EN;
else
- config1 &= ~NFC_SP_EN;
- writew(config1, &host->regs->config1);
+ config1 &= ~NFC_CONFIG1_SP_EN;
+ writenfc(config1, &host->regs->config1);
}
- writew(NFC_OUTPUT, &host->regs->config2);
+ writenfc(NFC_OUTPUT, &host->regs->operation);
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, spare_only);
@@ -265,14 +265,14 @@ static void send_read_id(struct mxc_nand_host *host)
uint16_t tmp;
/* NANDFC buffer 0 is used for device ID output */
- writew(0x0, &host->regs->buf_addr);
+ writenfc(0x0, &host->regs->buf_addr);
/* Read ID into main buffer */
- tmp = readw(&host->regs->config1);
- tmp &= ~NFC_SP_EN;
- writew(tmp, &host->regs->config1);
+ tmp = readnfc(&host->regs->config1);
+ tmp &= ~NFC_CONFIG1_SP_EN;
+ writenfc(tmp, &host->regs->config1);
- writew(NFC_ID, &host->regs->config2);
+ writenfc(NFC_ID, &host->regs->operation);
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, 0);
@@ -292,14 +292,14 @@ static uint16_t get_dev_status(struct mxc_nand_host *host)
/* store the main area1 first word, later do recovery */
store = readl(main_buf);
/* NANDFC buffer 1 is used for device status */
- writew(1, &host->regs->buf_addr);
+ writenfc(1, &host->regs->buf_addr);
/* Read status into main buffer */
- tmp = readw(&host->regs->config1);
- tmp &= ~NFC_SP_EN;
- writew(tmp, &host->regs->config1);
+ tmp = readnfc(&host->regs->config1);
+ tmp &= ~NFC_CONFIG1_SP_EN;
+ writenfc(tmp, &host->regs->config1);
- writew(NFC_STATUS, &host->regs->config2);
+ writenfc(NFC_STATUS, &host->regs->operation);
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, 0);
@@ -328,13 +328,13 @@ static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on)
{
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
- uint16_t tmp = readw(&host->regs->config1);
+ uint16_t tmp = readnfc(&host->regs->config1);
if (on)
- tmp |= NFC_ECC_EN;
+ tmp |= NFC_V1_V2_CONFIG1_ECC_EN;
else
- tmp &= ~NFC_ECC_EN;
- writew(tmp, &host->regs->config1);
+ tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN;
+ writenfc(tmp, &host->regs->config1);
}
#ifdef CONFIG_MXC_NAND_HWECC
@@ -667,7 +667,7 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
* additional correction. 2-Bit errors cannot be corrected by
* HW ECC, so we need to return failure
*/
- uint16_t ecc_status = readw(&host->regs->ecc_status_result);
+ uint16_t ecc_status = readnfc(&host->regs->ecc_status_result);
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
MTDDEBUG(MTD_DEBUG_LEVEL0,
@@ -1210,24 +1210,24 @@ int board_nand_init(struct nand_chip *this)
#endif
#ifdef MXC_NFC_V2_1
- tmp = readw(&host->regs->config1);
- tmp |= NFC_ONE_CYCLE;
- tmp |= NFC_4_8N_ECC;
- writew(tmp, &host->regs->config1);
+ tmp = readnfc(&host->regs->config1);
+ tmp |= NFC_V2_CONFIG1_ONE_CYCLE;
+ tmp |= NFC_V2_CONFIG1_ECC_MODE_4;
+ writenfc(tmp, &host->regs->config1);
if (host->pagesize_2k)
- writew(64/2, &host->regs->spare_area_size);
+ writenfc(64/2, &host->regs->spare_area_size);
else
- writew(16/2, &host->regs->spare_area_size);
+ writenfc(16/2, &host->regs->spare_area_size);
#endif
/*
* preset operation
* Unlock the internal RAM Buffer
*/
- writew(0x2, &host->regs->config);
+ writenfc(0x2, &host->regs->config);
/* Blocks to be unlocked */
- writew(0x0, &host->regs->unlockstart_blkaddr);
+ writenfc(0x0, &host->regs->unlockstart_blkaddr);
/* Originally (Freescale LTIB 2.6.21) 0x4000 was written to the
* unlockend_blkaddr, but the magic 0x4000 does not always work
* when writing more than some 32 megabytes (on 2k page nands)
@@ -1239,10 +1239,10 @@ int board_nand_init(struct nand_chip *this)
* This might be NAND chip specific and the i.MX31 datasheet is
* extremely vague about the semantics of this register.
*/
- writew(0xFFFF, &host->regs->unlockend_blkaddr);
+ writenfc(0xFFFF, &host->regs->unlockend_blkaddr);
/* Unlock Block Command for given address range */
- writew(0x4, &host->regs->wrprot);
+ writenfc(0x4, &host->regs->wrprot);
return 0;
}
diff --git a/include/fsl_nfc.h b/include/fsl_nfc.h
index ff537b4..013e9e2 100644
--- a/include/fsl_nfc.h
+++ b/include/fsl_nfc.h
@@ -113,58 +113,38 @@ struct fsl_nfc_regs {
#endif
};
-/*
- * Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register for Command
- * operation
- */
-#define NFC_CMD 0x1
+/* Set FCMD to 1, rest to 0 for Command operation */
+#define NFC_CMD 0x1
-/*
- * Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register for Address
- * operation
- */
-#define NFC_ADDR 0x2
+/* Set FADD to 1, rest to 0 for Address operation */
+#define NFC_ADDR 0x2
-/*
- * Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register for Input
- * operation
- */
-#define NFC_INPUT 0x4
+/* Set FDI to 1, rest to 0 for Input operation */
+#define NFC_INPUT 0x4
-/*
- * Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register for Data
- * Output operation
- */
-#define NFC_OUTPUT 0x8
+/* Set FDO to 001, rest to 0 for Data Output operation */
+#define NFC_OUTPUT 0x8
-/*
- * Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register for Read ID
- * operation
- */
-#define NFC_ID 0x10
+/* Set FDO to 010, rest to 0 for Read ID operation */
+#define NFC_ID 0x10
-/*
- * Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register for Read
- * Status operation
- */
-#define NFC_STATUS 0x20
+/* Set FDO to 100, rest to 0 for Read Status operation */
+#define NFC_STATUS 0x20
-/*
- * Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read Status
- * operation
- */
-#define NFC_INT 0x8000
+#define NFC_CONFIG1_SP_EN (1 << 2)
+#define NFC_CONFIG1_RST (1 << 6)
+#define NFC_CONFIG1_CE (1 << 7)
+#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3)
+#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4)
+#define NFC_V1_V2_CONFIG1_BIG (1 << 5)
+#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0)
+#define NFC_V2_CONFIG1_ONE_CYCLE (1 << 8)
+#define NFC_V2_CONFIG1_FP_INT (1 << 11)
-#ifdef MXC_NFC_V2_1
-#define NFC_4_8N_ECC (1 << 0)
-#endif
-#define NFC_SP_EN (1 << 2)
-#define NFC_ECC_EN (1 << 3)
-#define NFC_INT_MSK (1 << 4)
-#define NFC_BIG (1 << 5)
-#define NFC_RST (1 << 6)
-#define NFC_CE (1 << 7)
-#define NFC_ONE_CYCLE (1 << 8)
-#define NFC_FP_INT (1 << 11)
+#define NFC_V1_V2_CONFIG2_INT (1 << 15)
+
+#define operation config2
+#define readnfc readw
+#define writenfc writew
#endif /* __FSL_NFC_H */
diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c
index a40c998..615e820 100644
--- a/nand_spl/nand_boot_fsl_nfc.c
+++ b/nand_spl/nand_boot_fsl_nfc.c
@@ -36,13 +36,13 @@ static void nfc_wait_ready(void)
{
uint32_t tmp;
- while (!(readw(&nfc->config2) & NFC_INT))
+ while (!(readnfc(&nfc->config2) & NFC_V1_V2_CONFIG2_INT))
;
/* Reset interrupt flag */
- tmp = readw(&nfc->config2);
- tmp &= ~NFC_INT;
- writew(tmp, &nfc->config2);
+ tmp = readnfc(&nfc->config2);
+ tmp &= ~NFC_V1_V2_CONFIG2_INT;
+ writenfc(tmp, &nfc->config2);
}
static void nfc_nand_init(void)
@@ -51,43 +51,45 @@ static void nfc_nand_init(void)
int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
int config1;
- writew(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
+ writenfc(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
/* unlocking RAM Buff */
- writew(0x2, &nfc->config);
+ writenfc(0x2, &nfc->config);
/* hardware ECC checking and correct */
- config1 = readw(&nfc->config1) | NFC_ECC_EN | NFC_INT_MSK |
- NFC_ONE_CYCLE | NFC_FP_INT;
+ config1 = readnfc(&nfc->config1) | NFC_V1_V2_CONFIG1_ECC_EN |
+ NFC_V1_V2_CONFIG1_INT_MSK | NFC_V2_CONFIG1_ONE_CYCLE |
+ NFC_V2_CONFIG1_FP_INT;
/*
* if spare size is larger that 16 bytes per 512 byte hunk
* then use 8 symbol correction instead of 4
*/
if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16)
- config1 &= ~NFC_4_8N_ECC;
+ config1 &= ~NFC_V2_CONFIG1_ECC_MODE_4;
else
- config1 |= NFC_4_8N_ECC;
- writew(config1, &nfc->config1);
+ config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
+ writenfc(config1, &nfc->config1);
#elif defined(MXC_NFC_V1)
/* unlocking RAM Buff */
- writew(0x2, &nfc->config);
+ writenfc(0x2, &nfc->config);
/* hardware ECC checking and correct */
- writew(NFC_ECC_EN | NFC_INT_MSK, &nfc->config1);
+ writenfc(NFC_V1_V2_CONFIG1_ECC_EN | NFC_V1_V2_CONFIG1_INT_MSK,
+ &nfc->config1);
#endif
}
static void nfc_nand_command(unsigned short command)
{
- writew(command, &nfc->flash_cmd);
- writew(NFC_CMD, &nfc->config2);
+ writenfc(command, &nfc->flash_cmd);
+ writenfc(NFC_CMD, &nfc->operation);
nfc_wait_ready();
}
static void nfc_nand_address(unsigned short address)
{
- writew(address, &nfc->flash_addr);
- writew(NFC_ADDR, &nfc->config2);
+ writenfc(address, &nfc->flash_addr);
+ writenfc(NFC_ADDR, &nfc->operation);
nfc_wait_ready();
}
@@ -121,8 +123,8 @@ static void nfc_nand_data_output(void)
int i;
#endif
- writew(0, &nfc->buf_addr);
- writew(NFC_OUTPUT, &nfc->config2);
+ writenfc(0, &nfc->buf_addr);
+ writenfc(NFC_OUTPUT, &nfc->operation);
nfc_wait_ready();
#ifdef NAND_MXC_2K_MULTI_CYCLE
/*
@@ -130,8 +132,8 @@ static void nfc_nand_data_output(void)
* for pages larger than 512 bytes.
*/
for (i = 1; i < CONFIG_SYS_NAND_PAGE_SIZE / 512; i++) {
- writew(i, &nfc->buf_addr);
- writew(NFC_OUTPUT, &nfc->config2);
+ writenfc(i, &nfc->buf_addr);
+ writenfc(NFC_OUTPUT, &nfc->operation);
nfc_wait_ready();
}
#endif
@@ -160,7 +162,8 @@ static int nfc_nand_check_ecc(void)
static void nfc_nand_read_page(unsigned int page_address)
{
- writew(0, &nfc->buf_addr); /* read in first 0 buffer */
+ /* read in first 0 buffer */
+ writenfc(0, &nfc->buf_addr);
nfc_nand_command(NAND_CMD_READ0);
nfc_nand_page_address(page_address);
generated by cgit v1.1 at 2024-12-14 21:48:15 +0000